diff options
Diffstat (limited to 'drivers/scsi/lpfc/lpfc_hbadisc.c')
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_hbadisc.c | 7252 |
1 files changed, 7252 insertions, 0 deletions
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c new file mode 100644 index 000000000..549fa7d6c --- /dev/null +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -0,0 +1,7252 @@ +/******************************************************************* + * This file is part of the Emulex Linux Device Driver for * + * Fibre Channel Host Bus Adapters. * + * Copyright (C) 2017-2022 Broadcom. All Rights Reserved. The term * + * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries. * + * Copyright (C) 2004-2016 Emulex. All rights reserved. * + * EMULEX and SLI are trademarks of Emulex. * + * www.broadcom.com * + * Portions Copyright (C) 2004-2005 Christoph Hellwig * + * * + * This program is free software; you can redistribute it and/or * + * modify it under the terms of version 2 of the GNU General * + * Public License as published by the Free Software Foundation. * + * This program is distributed in the hope that it will be useful. * + * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND * + * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, * + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE * + * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD * + * TO BE LEGALLY INVALID. See the GNU General Public License for * + * more details, a copy of which can be found in the file COPYING * + * included with this package. * + *******************************************************************/ + +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/pci.h> +#include <linux/kthread.h> +#include <linux/interrupt.h> +#include <linux/lockdep.h> +#include <linux/utsname.h> + +#include <scsi/scsi.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_host.h> +#include <scsi/scsi_transport_fc.h> +#include <scsi/fc/fc_fs.h> + +#include "lpfc_hw4.h" +#include "lpfc_hw.h" +#include "lpfc_nl.h" +#include "lpfc_disc.h" +#include "lpfc_sli.h" +#include "lpfc_sli4.h" +#include "lpfc.h" +#include "lpfc_scsi.h" +#include "lpfc_nvme.h" +#include "lpfc_logmsg.h" +#include "lpfc_crtn.h" +#include "lpfc_vport.h" +#include "lpfc_debugfs.h" + +/* AlpaArray for assignment of scsid for scan-down and bind_method */ +static uint8_t lpfcAlpaArray[] = { + 0xEF, 0xE8, 0xE4, 0xE2, 0xE1, 0xE0, 0xDC, 0xDA, 0xD9, 0xD6, + 0xD5, 0xD4, 0xD3, 0xD2, 0xD1, 0xCE, 0xCD, 0xCC, 0xCB, 0xCA, + 0xC9, 0xC7, 0xC6, 0xC5, 0xC3, 0xBC, 0xBA, 0xB9, 0xB6, 0xB5, + 0xB4, 0xB3, 0xB2, 0xB1, 0xAE, 0xAD, 0xAC, 0xAB, 0xAA, 0xA9, + 0xA7, 0xA6, 0xA5, 0xA3, 0x9F, 0x9E, 0x9D, 0x9B, 0x98, 0x97, + 0x90, 0x8F, 0x88, 0x84, 0x82, 0x81, 0x80, 0x7C, 0x7A, 0x79, + 0x76, 0x75, 0x74, 0x73, 0x72, 0x71, 0x6E, 0x6D, 0x6C, 0x6B, + 0x6A, 0x69, 0x67, 0x66, 0x65, 0x63, 0x5C, 0x5A, 0x59, 0x56, + 0x55, 0x54, 0x53, 0x52, 0x51, 0x4E, 0x4D, 0x4C, 0x4B, 0x4A, + 0x49, 0x47, 0x46, 0x45, 0x43, 0x3C, 0x3A, 0x39, 0x36, 0x35, + 0x34, 0x33, 0x32, 0x31, 0x2E, 0x2D, 0x2C, 0x2B, 0x2A, 0x29, + 0x27, 0x26, 0x25, 0x23, 0x1F, 0x1E, 0x1D, 0x1B, 0x18, 0x17, + 0x10, 0x0F, 0x08, 0x04, 0x02, 0x01 +}; + +static void lpfc_disc_timeout_handler(struct lpfc_vport *); +static void lpfc_disc_flush_list(struct lpfc_vport *vport); +static void lpfc_unregister_fcfi_cmpl(struct lpfc_hba *, LPFC_MBOXQ_t *); +static int lpfc_fcf_inuse(struct lpfc_hba *); +static void lpfc_mbx_cmpl_read_sparam(struct lpfc_hba *, LPFC_MBOXQ_t *); +static void lpfc_check_inactive_vmid(struct lpfc_hba *phba); +static void lpfc_check_vmid_qfpa_issue(struct lpfc_hba *phba); + +static int +lpfc_valid_xpt_node(struct lpfc_nodelist *ndlp) +{ + if (ndlp->nlp_fc4_type || + ndlp->nlp_type & NLP_FABRIC) + return 1; + return 0; +} +/* The source of a terminate rport I/O is either a dev_loss_tmo + * event or a call to fc_remove_host. While the rport should be + * valid during these downcalls, the transport can call twice + * in a single event. This routine provides somoe protection + * as the NDLP isn't really free, just released to the pool. + */ +static int +lpfc_rport_invalid(struct fc_rport *rport) +{ + struct lpfc_rport_data *rdata; + struct lpfc_nodelist *ndlp; + + if (!rport) { + pr_err("**** %s: NULL rport, exit.\n", __func__); + return -EINVAL; + } + + rdata = rport->dd_data; + if (!rdata) { + pr_err("**** %s: NULL dd_data on rport x%px SID x%x\n", + __func__, rport, rport->scsi_target_id); + return -EINVAL; + } + + ndlp = rdata->pnode; + if (!rdata->pnode) { + pr_info("**** %s: NULL ndlp on rport x%px SID x%x\n", + __func__, rport, rport->scsi_target_id); + return -EINVAL; + } + + if (!ndlp->vport) { + pr_err("**** %s: Null vport on ndlp x%px, DID x%x rport x%px " + "SID x%x\n", __func__, ndlp, ndlp->nlp_DID, rport, + rport->scsi_target_id); + return -EINVAL; + } + return 0; +} + +void +lpfc_terminate_rport_io(struct fc_rport *rport) +{ + struct lpfc_rport_data *rdata; + struct lpfc_nodelist *ndlp; + struct lpfc_vport *vport; + + if (lpfc_rport_invalid(rport)) + return; + + rdata = rport->dd_data; + ndlp = rdata->pnode; + vport = ndlp->vport; + lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_RPORT, + "rport terminate: sid:x%x did:x%x flg:x%x", + ndlp->nlp_sid, ndlp->nlp_DID, ndlp->nlp_flag); + + if (ndlp->nlp_sid != NLP_NO_SID) + lpfc_sli_abort_iocb(vport, ndlp->nlp_sid, 0, LPFC_CTX_TGT); +} + +/* + * This function will be called when dev_loss_tmo fire. + */ +void +lpfc_dev_loss_tmo_callbk(struct fc_rport *rport) +{ + struct lpfc_nodelist *ndlp; + struct lpfc_vport *vport; + struct lpfc_hba *phba; + struct lpfc_work_evt *evtp; + unsigned long iflags; + + ndlp = ((struct lpfc_rport_data *)rport->dd_data)->pnode; + if (!ndlp) + return; + + vport = ndlp->vport; + phba = vport->phba; + + lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_RPORT, + "rport devlosscb: sid:x%x did:x%x flg:x%x", + ndlp->nlp_sid, ndlp->nlp_DID, ndlp->nlp_flag); + + lpfc_printf_vlog(ndlp->vport, KERN_INFO, LOG_NODE, + "3181 dev_loss_callbk x%06x, rport x%px flg x%x " + "load_flag x%x refcnt %d state %d xpt x%x\n", + ndlp->nlp_DID, ndlp->rport, ndlp->nlp_flag, + vport->load_flag, kref_read(&ndlp->kref), + ndlp->nlp_state, ndlp->fc4_xpt_flags); + + /* Don't schedule a worker thread event if the vport is going down. + * The teardown process cleans up the node via lpfc_drop_node. + */ + if (vport->load_flag & FC_UNLOADING) { + ((struct lpfc_rport_data *)rport->dd_data)->pnode = NULL; + ndlp->rport = NULL; + + ndlp->fc4_xpt_flags &= ~SCSI_XPT_REGD; + /* clear the NLP_XPT_REGD if the node is not registered + * with nvme-fc + */ + if (ndlp->fc4_xpt_flags == NLP_XPT_REGD) + ndlp->fc4_xpt_flags &= ~NLP_XPT_REGD; + + /* Remove the node reference from remote_port_add now. + * The driver will not call remote_port_delete. + */ + lpfc_nlp_put(ndlp); + return; + } + + if (ndlp->nlp_state == NLP_STE_MAPPED_NODE) + return; + + if (rport->port_name != wwn_to_u64(ndlp->nlp_portname.u.wwn)) + lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, + "6789 rport name %llx != node port name %llx", + rport->port_name, + wwn_to_u64(ndlp->nlp_portname.u.wwn)); + + evtp = &ndlp->dev_loss_evt; + + if (!list_empty(&evtp->evt_listp)) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, + "6790 rport name %llx dev_loss_evt pending\n", + rport->port_name); + return; + } + + spin_lock_irqsave(&ndlp->lock, iflags); + ndlp->nlp_flag |= NLP_IN_DEV_LOSS; + + /* If there is a PLOGI in progress, and we are in a + * NLP_NPR_2B_DISC state, don't turn off the flag. + */ + if (ndlp->nlp_state != NLP_STE_PLOGI_ISSUE) + ndlp->nlp_flag &= ~NLP_NPR_2B_DISC; + + /* + * The backend does not expect any more calls associated with this + * rport. Remove the association between rport and ndlp. + */ + ndlp->fc4_xpt_flags &= ~SCSI_XPT_REGD; + ((struct lpfc_rport_data *)rport->dd_data)->pnode = NULL; + ndlp->rport = NULL; + spin_unlock_irqrestore(&ndlp->lock, iflags); + + if (phba->worker_thread) { + /* We need to hold the node by incrementing the reference + * count until this queued work is done + */ + evtp->evt_arg1 = lpfc_nlp_get(ndlp); + + spin_lock_irqsave(&phba->hbalock, iflags); + if (evtp->evt_arg1) { + evtp->evt = LPFC_EVT_DEV_LOSS; + list_add_tail(&evtp->evt_listp, &phba->work_list); + lpfc_worker_wake_up(phba); + } + spin_unlock_irqrestore(&phba->hbalock, iflags); + } else { + lpfc_printf_vlog(ndlp->vport, KERN_INFO, LOG_NODE, + "3188 worker thread is stopped %s x%06x, " + " rport x%px flg x%x load_flag x%x refcnt " + "%d\n", __func__, ndlp->nlp_DID, + ndlp->rport, ndlp->nlp_flag, + vport->load_flag, kref_read(&ndlp->kref)); + if (!(ndlp->fc4_xpt_flags & NVME_XPT_REGD)) { + spin_lock_irqsave(&ndlp->lock, iflags); + /* Node is in dev loss. No further transaction. */ + ndlp->nlp_flag &= ~NLP_IN_DEV_LOSS; + spin_unlock_irqrestore(&ndlp->lock, iflags); + lpfc_disc_state_machine(vport, ndlp, NULL, + NLP_EVT_DEVICE_RM); + } + + } + + return; +} + +/** + * lpfc_check_inactive_vmid_one - VMID inactivity checker for a vport + * @vport: Pointer to vport context object. + * + * This function checks for idle VMID entries related to a particular vport. If + * found unused/idle, free them accordingly. + **/ +static void lpfc_check_inactive_vmid_one(struct lpfc_vport *vport) +{ + u16 keep; + u32 difftime = 0, r, bucket; + u64 *lta; + int cpu; + struct lpfc_vmid *vmp; + + write_lock(&vport->vmid_lock); + + if (!vport->cur_vmid_cnt) + goto out; + + /* iterate through the table */ + hash_for_each(vport->hash_table, bucket, vmp, hnode) { + keep = 0; + if (vmp->flag & LPFC_VMID_REGISTERED) { + /* check if the particular VMID is in use */ + /* for all available per cpu variable */ + for_each_possible_cpu(cpu) { + /* if last access time is less than timeout */ + lta = per_cpu_ptr(vmp->last_io_time, cpu); + if (!lta) + continue; + difftime = (jiffies) - (*lta); + if ((vport->vmid_inactivity_timeout * + JIFFIES_PER_HR) > difftime) { + keep = 1; + break; + } + } + + /* if none of the cpus have been used by the vm, */ + /* remove the entry if already registered */ + if (!keep) { + /* mark the entry for deregistration */ + vmp->flag = LPFC_VMID_DE_REGISTER; + write_unlock(&vport->vmid_lock); + if (vport->vmid_priority_tagging) + r = lpfc_vmid_uvem(vport, vmp, false); + else + r = lpfc_vmid_cmd(vport, + SLI_CTAS_DAPP_IDENT, + vmp); + + /* decrement number of active vms and mark */ + /* entry in slot as free */ + write_lock(&vport->vmid_lock); + if (!r) { + struct lpfc_vmid *ht = vmp; + + vport->cur_vmid_cnt--; + ht->flag = LPFC_VMID_SLOT_FREE; + free_percpu(ht->last_io_time); + ht->last_io_time = NULL; + hash_del(&ht->hnode); + } + } + } + } + out: + write_unlock(&vport->vmid_lock); +} + +/** + * lpfc_check_inactive_vmid - VMID inactivity checker + * @phba: Pointer to hba context object. + * + * This function is called from the worker thread to determine if an entry in + * the VMID table can be released since there was no I/O activity seen from that + * particular VM for the specified time. When this happens, the entry in the + * table is released and also the resources on the switch cleared. + **/ + +static void lpfc_check_inactive_vmid(struct lpfc_hba *phba) +{ + struct lpfc_vport *vport; + struct lpfc_vport **vports; + int i; + + vports = lpfc_create_vport_work_array(phba); + if (!vports) + return; + + for (i = 0; i <= phba->max_vports; i++) { + if ((!vports[i]) && (i == 0)) + vport = phba->pport; + else + vport = vports[i]; + if (!vport) + break; + + lpfc_check_inactive_vmid_one(vport); + } + lpfc_destroy_vport_work_array(phba, vports); +} + +/** + * lpfc_check_nlp_post_devloss - Check to restore ndlp refcnt after devloss + * @vport: Pointer to vport object. + * @ndlp: Pointer to remote node object. + * + * If NLP_IN_RECOV_POST_DEV_LOSS flag was set due to outstanding recovery of + * node during dev_loss_tmo processing, then this function restores the nlp_put + * kref decrement from lpfc_dev_loss_tmo_handler. + **/ +void +lpfc_check_nlp_post_devloss(struct lpfc_vport *vport, + struct lpfc_nodelist *ndlp) +{ + unsigned long iflags; + + spin_lock_irqsave(&ndlp->lock, iflags); + if (ndlp->save_flags & NLP_IN_RECOV_POST_DEV_LOSS) { + ndlp->save_flags &= ~NLP_IN_RECOV_POST_DEV_LOSS; + spin_unlock_irqrestore(&ndlp->lock, iflags); + lpfc_nlp_get(ndlp); + lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY | LOG_NODE, + "8438 Devloss timeout reversed on DID x%x " + "refcnt %d ndlp %p flag x%x " + "port_state = x%x\n", + ndlp->nlp_DID, kref_read(&ndlp->kref), ndlp, + ndlp->nlp_flag, vport->port_state); + spin_lock_irqsave(&ndlp->lock, iflags); + } + spin_unlock_irqrestore(&ndlp->lock, iflags); +} + +/** + * lpfc_dev_loss_tmo_handler - Remote node devloss timeout handler + * @ndlp: Pointer to remote node object. + * + * This function is called from the worker thread when devloss timeout timer + * expires. For SLI4 host, this routine shall return 1 when at lease one + * remote node, including this @ndlp, is still in use of FCF; otherwise, this + * routine shall return 0 when there is no remote node is still in use of FCF + * when devloss timeout happened to this @ndlp. + **/ +static int +lpfc_dev_loss_tmo_handler(struct lpfc_nodelist *ndlp) +{ + struct lpfc_vport *vport; + struct lpfc_hba *phba; + uint8_t *name; + int warn_on = 0; + int fcf_inuse = 0; + bool recovering = false; + struct fc_vport *fc_vport = NULL; + unsigned long iflags; + + vport = ndlp->vport; + name = (uint8_t *)&ndlp->nlp_portname; + phba = vport->phba; + + spin_lock_irqsave(&ndlp->lock, iflags); + ndlp->nlp_flag &= ~NLP_IN_DEV_LOSS; + spin_unlock_irqrestore(&ndlp->lock, iflags); + + if (phba->sli_rev == LPFC_SLI_REV4) + fcf_inuse = lpfc_fcf_inuse(phba); + + lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_RPORT, + "rport devlosstmo:did:x%x type:x%x id:x%x", + ndlp->nlp_DID, ndlp->nlp_type, ndlp->nlp_sid); + + lpfc_printf_vlog(ndlp->vport, KERN_INFO, LOG_NODE, + "3182 %s x%06x, nflag x%x xflags x%x refcnt %d\n", + __func__, ndlp->nlp_DID, ndlp->nlp_flag, + ndlp->fc4_xpt_flags, kref_read(&ndlp->kref)); + + /* If the driver is recovering the rport, ignore devloss. */ + if (ndlp->nlp_state == NLP_STE_MAPPED_NODE) { + lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY, + "0284 Devloss timeout Ignored on " + "WWPN %x:%x:%x:%x:%x:%x:%x:%x " + "NPort x%x\n", + *name, *(name+1), *(name+2), *(name+3), + *(name+4), *(name+5), *(name+6), *(name+7), + ndlp->nlp_DID); + return fcf_inuse; + } + + /* Fabric nodes are done. */ + if (ndlp->nlp_type & NLP_FABRIC) { + spin_lock_irqsave(&ndlp->lock, iflags); + /* In massive vport configuration settings, it's possible + * dev_loss_tmo fired during node recovery. So, check if + * fabric nodes are in discovery states outstanding. + */ + switch (ndlp->nlp_DID) { + case Fabric_DID: + fc_vport = vport->fc_vport; + if (fc_vport && + fc_vport->vport_state == FC_VPORT_INITIALIZING) + recovering = true; + break; + case Fabric_Cntl_DID: + if (ndlp->nlp_flag & NLP_REG_LOGIN_SEND) + recovering = true; + break; + case FDMI_DID: + fallthrough; + case NameServer_DID: + if (ndlp->nlp_state >= NLP_STE_PLOGI_ISSUE && + ndlp->nlp_state <= NLP_STE_REG_LOGIN_ISSUE) + recovering = true; + break; + } + spin_unlock_irqrestore(&ndlp->lock, iflags); + + /* Mark an NLP_IN_RECOV_POST_DEV_LOSS flag to know if reversing + * the following lpfc_nlp_put is necessary after fabric node is + * recovered. + */ + if (recovering) { + lpfc_printf_vlog(vport, KERN_INFO, + LOG_DISCOVERY | LOG_NODE, + "8436 Devloss timeout marked on " + "DID x%x refcnt %d ndlp %p " + "flag x%x port_state = x%x\n", + ndlp->nlp_DID, kref_read(&ndlp->kref), + ndlp, ndlp->nlp_flag, + vport->port_state); + spin_lock_irqsave(&ndlp->lock, iflags); + ndlp->save_flags |= NLP_IN_RECOV_POST_DEV_LOSS; + spin_unlock_irqrestore(&ndlp->lock, iflags); + } else if (ndlp->nlp_state == NLP_STE_UNMAPPED_NODE) { + /* Fabric node fully recovered before this dev_loss_tmo + * queue work is processed. Thus, ignore the + * dev_loss_tmo event. + */ + lpfc_printf_vlog(vport, KERN_INFO, + LOG_DISCOVERY | LOG_NODE, + "8437 Devloss timeout ignored on " + "DID x%x refcnt %d ndlp %p " + "flag x%x port_state = x%x\n", + ndlp->nlp_DID, kref_read(&ndlp->kref), + ndlp, ndlp->nlp_flag, + vport->port_state); + return fcf_inuse; + } + + lpfc_nlp_put(ndlp); + return fcf_inuse; + } + + if (ndlp->nlp_sid != NLP_NO_SID) { + warn_on = 1; + lpfc_sli_abort_iocb(vport, ndlp->nlp_sid, 0, LPFC_CTX_TGT); + } + + if (warn_on) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, + "0203 Devloss timeout on " + "WWPN %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x " + "NPort x%06x Data: x%x x%x x%x refcnt %d\n", + *name, *(name+1), *(name+2), *(name+3), + *(name+4), *(name+5), *(name+6), *(name+7), + ndlp->nlp_DID, ndlp->nlp_flag, + ndlp->nlp_state, ndlp->nlp_rpi, + kref_read(&ndlp->kref)); + } else { + lpfc_printf_vlog(vport, KERN_INFO, LOG_TRACE_EVENT, + "0204 Devloss timeout on " + "WWPN %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x " + "NPort x%06x Data: x%x x%x x%x\n", + *name, *(name+1), *(name+2), *(name+3), + *(name+4), *(name+5), *(name+6), *(name+7), + ndlp->nlp_DID, ndlp->nlp_flag, + ndlp->nlp_state, ndlp->nlp_rpi); + } + + /* If we are devloss, but we are in the process of rediscovering the + * ndlp, don't issue a NLP_EVT_DEVICE_RM event. + */ + if (ndlp->nlp_state >= NLP_STE_PLOGI_ISSUE && + ndlp->nlp_state <= NLP_STE_PRLI_ISSUE) { + return fcf_inuse; + } + + if (!(ndlp->fc4_xpt_flags & NVME_XPT_REGD)) + lpfc_disc_state_machine(vport, ndlp, NULL, NLP_EVT_DEVICE_RM); + + return fcf_inuse; +} + +static void lpfc_check_vmid_qfpa_issue(struct lpfc_hba *phba) +{ + struct lpfc_vport *vport; + struct lpfc_vport **vports; + int i; + + vports = lpfc_create_vport_work_array(phba); + if (!vports) + return; + + for (i = 0; i <= phba->max_vports; i++) { + if ((!vports[i]) && (i == 0)) + vport = phba->pport; + else + vport = vports[i]; + if (!vport) + break; + + if (vport->vmid_flag & LPFC_VMID_ISSUE_QFPA) { + if (!lpfc_issue_els_qfpa(vport)) + vport->vmid_flag &= ~LPFC_VMID_ISSUE_QFPA; + } + } + lpfc_destroy_vport_work_array(phba, vports); +} + +/** + * lpfc_sli4_post_dev_loss_tmo_handler - SLI4 post devloss timeout handler + * @phba: Pointer to hba context object. + * @fcf_inuse: SLI4 FCF in-use state reported from devloss timeout handler. + * @nlp_did: remote node identifer with devloss timeout. + * + * This function is called from the worker thread after invoking devloss + * timeout handler and releasing the reference count for the ndlp with + * which the devloss timeout was handled for SLI4 host. For the devloss + * timeout of the last remote node which had been in use of FCF, when this + * routine is invoked, it shall be guaranteed that none of the remote are + * in-use of FCF. When devloss timeout to the last remote using the FCF, + * if the FIP engine is neither in FCF table scan process nor roundrobin + * failover process, the in-use FCF shall be unregistered. If the FIP + * engine is in FCF discovery process, the devloss timeout state shall + * be set for either the FCF table scan process or roundrobin failover + * process to unregister the in-use FCF. + **/ +static void +lpfc_sli4_post_dev_loss_tmo_handler(struct lpfc_hba *phba, int fcf_inuse, + uint32_t nlp_did) +{ + /* If devloss timeout happened to a remote node when FCF had no + * longer been in-use, do nothing. + */ + if (!fcf_inuse) + return; + + if ((phba->hba_flag & HBA_FIP_SUPPORT) && !lpfc_fcf_inuse(phba)) { + spin_lock_irq(&phba->hbalock); + if (phba->fcf.fcf_flag & FCF_DISCOVERY) { + if (phba->hba_flag & HBA_DEVLOSS_TMO) { + spin_unlock_irq(&phba->hbalock); + return; + } + phba->hba_flag |= HBA_DEVLOSS_TMO; + lpfc_printf_log(phba, KERN_INFO, LOG_FIP, + "2847 Last remote node (x%x) using " + "FCF devloss tmo\n", nlp_did); + } + if (phba->fcf.fcf_flag & FCF_REDISC_PROG) { + spin_unlock_irq(&phba->hbalock); + lpfc_printf_log(phba, KERN_INFO, LOG_FIP, + "2868 Devloss tmo to FCF rediscovery " + "in progress\n"); + return; + } + if (!(phba->hba_flag & (FCF_TS_INPROG | FCF_RR_INPROG))) { + spin_unlock_irq(&phba->hbalock); + lpfc_printf_log(phba, KERN_INFO, LOG_FIP, + "2869 Devloss tmo to idle FIP engine, " + "unreg in-use FCF and rescan.\n"); + /* Unregister in-use FCF and rescan */ + lpfc_unregister_fcf_rescan(phba); + return; + } + spin_unlock_irq(&phba->hbalock); + if (phba->hba_flag & FCF_TS_INPROG) + lpfc_printf_log(phba, KERN_INFO, LOG_FIP, + "2870 FCF table scan in progress\n"); + if (phba->hba_flag & FCF_RR_INPROG) + lpfc_printf_log(phba, KERN_INFO, LOG_FIP, + "2871 FLOGI roundrobin FCF failover " + "in progress\n"); + } + lpfc_unregister_unused_fcf(phba); +} + +/** + * lpfc_alloc_fast_evt - Allocates data structure for posting event + * @phba: Pointer to hba context object. + * + * This function is called from the functions which need to post + * events from interrupt context. This function allocates data + * structure required for posting event. It also keeps track of + * number of events pending and prevent event storm when there are + * too many events. + **/ +struct lpfc_fast_path_event * +lpfc_alloc_fast_evt(struct lpfc_hba *phba) { + struct lpfc_fast_path_event *ret; + + /* If there are lot of fast event do not exhaust memory due to this */ + if (atomic_read(&phba->fast_event_count) > LPFC_MAX_EVT_COUNT) + return NULL; + + ret = kzalloc(sizeof(struct lpfc_fast_path_event), + GFP_ATOMIC); + if (ret) { + atomic_inc(&phba->fast_event_count); + INIT_LIST_HEAD(&ret->work_evt.evt_listp); + ret->work_evt.evt = LPFC_EVT_FASTPATH_MGMT_EVT; + } + return ret; +} + +/** + * lpfc_free_fast_evt - Frees event data structure + * @phba: Pointer to hba context object. + * @evt: Event object which need to be freed. + * + * This function frees the data structure required for posting + * events. + **/ +void +lpfc_free_fast_evt(struct lpfc_hba *phba, + struct lpfc_fast_path_event *evt) { + + atomic_dec(&phba->fast_event_count); + kfree(evt); +} + +/** + * lpfc_send_fastpath_evt - Posts events generated from fast path + * @phba: Pointer to hba context object. + * @evtp: Event data structure. + * + * This function is called from worker thread, when the interrupt + * context need to post an event. This function posts the event + * to fc transport netlink interface. + **/ +static void +lpfc_send_fastpath_evt(struct lpfc_hba *phba, + struct lpfc_work_evt *evtp) +{ + unsigned long evt_category, evt_sub_category; + struct lpfc_fast_path_event *fast_evt_data; + char *evt_data; + uint32_t evt_data_size; + struct Scsi_Host *shost; + + fast_evt_data = container_of(evtp, struct lpfc_fast_path_event, + work_evt); + + evt_category = (unsigned long) fast_evt_data->un.fabric_evt.event_type; + evt_sub_category = (unsigned long) fast_evt_data->un. + fabric_evt.subcategory; + shost = lpfc_shost_from_vport(fast_evt_data->vport); + if (evt_category == FC_REG_FABRIC_EVENT) { + if (evt_sub_category == LPFC_EVENT_FCPRDCHKERR) { + evt_data = (char *) &fast_evt_data->un.read_check_error; + evt_data_size = sizeof(fast_evt_data->un. + read_check_error); + } else if ((evt_sub_category == LPFC_EVENT_FABRIC_BUSY) || + (evt_sub_category == LPFC_EVENT_PORT_BUSY)) { + evt_data = (char *) &fast_evt_data->un.fabric_evt; + evt_data_size = sizeof(fast_evt_data->un.fabric_evt); + } else { + lpfc_free_fast_evt(phba, fast_evt_data); + return; + } + } else if (evt_category == FC_REG_SCSI_EVENT) { + switch (evt_sub_category) { + case LPFC_EVENT_QFULL: + case LPFC_EVENT_DEVBSY: + evt_data = (char *) &fast_evt_data->un.scsi_evt; + evt_data_size = sizeof(fast_evt_data->un.scsi_evt); + break; + case LPFC_EVENT_CHECK_COND: + evt_data = (char *) &fast_evt_data->un.check_cond_evt; + evt_data_size = sizeof(fast_evt_data->un. + check_cond_evt); + break; + case LPFC_EVENT_VARQUEDEPTH: + evt_data = (char *) &fast_evt_data->un.queue_depth_evt; + evt_data_size = sizeof(fast_evt_data->un. + queue_depth_evt); + break; + default: + lpfc_free_fast_evt(phba, fast_evt_data); + return; + } + } else { + lpfc_free_fast_evt(phba, fast_evt_data); + return; + } + + if (phba->cfg_enable_fc4_type != LPFC_ENABLE_NVME) + fc_host_post_vendor_event(shost, + fc_get_event_number(), + evt_data_size, + evt_data, + LPFC_NL_VENDOR_ID); + + lpfc_free_fast_evt(phba, fast_evt_data); + return; +} + +static void +lpfc_work_list_done(struct lpfc_hba *phba) +{ + struct lpfc_work_evt *evtp = NULL; + struct lpfc_nodelist *ndlp; + int free_evt; + int fcf_inuse; + uint32_t nlp_did; + bool hba_pci_err; + + spin_lock_irq(&phba->hbalock); + while (!list_empty(&phba->work_list)) { + list_remove_head((&phba->work_list), evtp, typeof(*evtp), + evt_listp); + spin_unlock_irq(&phba->hbalock); + hba_pci_err = test_bit(HBA_PCI_ERR, &phba->bit_flags); + free_evt = 1; + switch (evtp->evt) { + case LPFC_EVT_ELS_RETRY: + ndlp = (struct lpfc_nodelist *) (evtp->evt_arg1); + if (!hba_pci_err) { + lpfc_els_retry_delay_handler(ndlp); + free_evt = 0; /* evt is part of ndlp */ + } + /* decrement the node reference count held + * for this queued work + */ + lpfc_nlp_put(ndlp); + break; + case LPFC_EVT_DEV_LOSS: + ndlp = (struct lpfc_nodelist *)(evtp->evt_arg1); + fcf_inuse = lpfc_dev_loss_tmo_handler(ndlp); + free_evt = 0; + /* decrement the node reference count held for + * this queued work + */ + nlp_did = ndlp->nlp_DID; + lpfc_nlp_put(ndlp); + if (phba->sli_rev == LPFC_SLI_REV4) + lpfc_sli4_post_dev_loss_tmo_handler(phba, + fcf_inuse, + nlp_did); + break; + case LPFC_EVT_RECOVER_PORT: + ndlp = (struct lpfc_nodelist *)(evtp->evt_arg1); + if (!hba_pci_err) { + lpfc_sli_abts_recover_port(ndlp->vport, ndlp); + free_evt = 0; + } + /* decrement the node reference count held for + * this queued work + */ + lpfc_nlp_put(ndlp); + break; + case LPFC_EVT_ONLINE: + if (phba->link_state < LPFC_LINK_DOWN) + *(int *) (evtp->evt_arg1) = lpfc_online(phba); + else + *(int *) (evtp->evt_arg1) = 0; + complete((struct completion *)(evtp->evt_arg2)); + break; + case LPFC_EVT_OFFLINE_PREP: + if (phba->link_state >= LPFC_LINK_DOWN) + lpfc_offline_prep(phba, LPFC_MBX_WAIT); + *(int *)(evtp->evt_arg1) = 0; + complete((struct completion *)(evtp->evt_arg2)); + break; + case LPFC_EVT_OFFLINE: + lpfc_offline(phba); + lpfc_sli_brdrestart(phba); + *(int *)(evtp->evt_arg1) = + lpfc_sli_brdready(phba, HS_FFRDY | HS_MBRDY); + lpfc_unblock_mgmt_io(phba); + complete((struct completion *)(evtp->evt_arg2)); + break; + case LPFC_EVT_WARM_START: + lpfc_offline(phba); + lpfc_reset_barrier(phba); + lpfc_sli_brdreset(phba); + lpfc_hba_down_post(phba); + *(int *)(evtp->evt_arg1) = + lpfc_sli_brdready(phba, HS_MBRDY); + lpfc_unblock_mgmt_io(phba); + complete((struct completion *)(evtp->evt_arg2)); + break; + case LPFC_EVT_KILL: + lpfc_offline(phba); + *(int *)(evtp->evt_arg1) + = (phba->pport->stopped) + ? 0 : lpfc_sli_brdkill(phba); + lpfc_unblock_mgmt_io(phba); + complete((struct completion *)(evtp->evt_arg2)); + break; + case LPFC_EVT_FASTPATH_MGMT_EVT: + lpfc_send_fastpath_evt(phba, evtp); + free_evt = 0; + break; + case LPFC_EVT_RESET_HBA: + if (!(phba->pport->load_flag & FC_UNLOADING)) + lpfc_reset_hba(phba); + break; + } + if (free_evt) + kfree(evtp); + spin_lock_irq(&phba->hbalock); + } + spin_unlock_irq(&phba->hbalock); + +} + +static void +lpfc_work_done(struct lpfc_hba *phba) +{ + struct lpfc_sli_ring *pring; + uint32_t ha_copy, status, control, work_port_events; + struct lpfc_vport **vports; + struct lpfc_vport *vport; + int i; + bool hba_pci_err; + + hba_pci_err = test_bit(HBA_PCI_ERR, &phba->bit_flags); + spin_lock_irq(&phba->hbalock); + ha_copy = phba->work_ha; + phba->work_ha = 0; + spin_unlock_irq(&phba->hbalock); + if (hba_pci_err) + ha_copy = 0; + + /* First, try to post the next mailbox command to SLI4 device */ + if (phba->pci_dev_grp == LPFC_PCI_DEV_OC && !hba_pci_err) + lpfc_sli4_post_async_mbox(phba); + + if (ha_copy & HA_ERATT) { + /* Handle the error attention event */ + lpfc_handle_eratt(phba); + + if (phba->fw_dump_cmpl) { + complete(phba->fw_dump_cmpl); + phba->fw_dump_cmpl = NULL; + } + } + + if (ha_copy & HA_MBATT) + lpfc_sli_handle_mb_event(phba); + + if (ha_copy & HA_LATT) + lpfc_handle_latt(phba); + + /* Handle VMID Events */ + if (lpfc_is_vmid_enabled(phba) && !hba_pci_err) { + if (phba->pport->work_port_events & + WORKER_CHECK_VMID_ISSUE_QFPA) { + lpfc_check_vmid_qfpa_issue(phba); + phba->pport->work_port_events &= + ~WORKER_CHECK_VMID_ISSUE_QFPA; + } + if (phba->pport->work_port_events & + WORKER_CHECK_INACTIVE_VMID) { + lpfc_check_inactive_vmid(phba); + phba->pport->work_port_events &= + ~WORKER_CHECK_INACTIVE_VMID; + } + } + + /* Process SLI4 events */ + if (phba->pci_dev_grp == LPFC_PCI_DEV_OC) { + if (phba->hba_flag & HBA_RRQ_ACTIVE) + lpfc_handle_rrq_active(phba); + if (phba->hba_flag & ELS_XRI_ABORT_EVENT) + lpfc_sli4_els_xri_abort_event_proc(phba); + if (phba->hba_flag & ASYNC_EVENT) + lpfc_sli4_async_event_proc(phba); + if (phba->hba_flag & HBA_POST_RECEIVE_BUFFER) { + spin_lock_irq(&phba->hbalock); + phba->hba_flag &= ~HBA_POST_RECEIVE_BUFFER; + spin_unlock_irq(&phba->hbalock); + lpfc_sli_hbqbuf_add_hbqs(phba, LPFC_ELS_HBQ); + } + if (phba->fcf.fcf_flag & FCF_REDISC_EVT) + lpfc_sli4_fcf_redisc_event_proc(phba); + } + + vports = lpfc_create_vport_work_array(phba); + if (vports != NULL) + for (i = 0; i <= phba->max_vports; i++) { + /* + * We could have no vports in array if unloading, so if + * this happens then just use the pport + */ + if (vports[i] == NULL && i == 0) + vport = phba->pport; + else + vport = vports[i]; + if (vport == NULL) + break; + spin_lock_irq(&vport->work_port_lock); + work_port_events = vport->work_port_events; + vport->work_port_events &= ~work_port_events; + spin_unlock_irq(&vport->work_port_lock); + if (hba_pci_err) + continue; + if (work_port_events & WORKER_DISC_TMO) + lpfc_disc_timeout_handler(vport); + if (work_port_events & WORKER_ELS_TMO) + lpfc_els_timeout_handler(vport); + if (work_port_events & WORKER_HB_TMO) + lpfc_hb_timeout_handler(phba); + if (work_port_events & WORKER_MBOX_TMO) + lpfc_mbox_timeout_handler(phba); + if (work_port_events & WORKER_FABRIC_BLOCK_TMO) + lpfc_unblock_fabric_iocbs(phba); + if (work_port_events & WORKER_RAMP_DOWN_QUEUE) + lpfc_ramp_down_queue_handler(phba); + if (work_port_events & WORKER_DELAYED_DISC_TMO) + lpfc_delayed_disc_timeout_handler(vport); + } + lpfc_destroy_vport_work_array(phba, vports); + + pring = lpfc_phba_elsring(phba); + status = (ha_copy & (HA_RXMASK << (4*LPFC_ELS_RING))); + status >>= (4*LPFC_ELS_RING); + if (pring && (status & HA_RXMASK || + pring->flag & LPFC_DEFERRED_RING_EVENT || + phba->hba_flag & HBA_SP_QUEUE_EVT)) { + if (pring->flag & LPFC_STOP_IOCB_EVENT) { + pring->flag |= LPFC_DEFERRED_RING_EVENT; + /* Preserve legacy behavior. */ + if (!(phba->hba_flag & HBA_SP_QUEUE_EVT)) + set_bit(LPFC_DATA_READY, &phba->data_flags); + } else { + /* Driver could have abort request completed in queue + * when link goes down. Allow for this transition. + */ + if (phba->link_state >= LPFC_LINK_DOWN || + phba->link_flag & LS_MDS_LOOPBACK) { + pring->flag &= ~LPFC_DEFERRED_RING_EVENT; + lpfc_sli_handle_slow_ring_event(phba, pring, + (status & + HA_RXMASK)); + } + } + if (phba->sli_rev == LPFC_SLI_REV4) + lpfc_drain_txq(phba); + /* + * Turn on Ring interrupts + */ + if (phba->sli_rev <= LPFC_SLI_REV3) { + spin_lock_irq(&phba->hbalock); + control = readl(phba->HCregaddr); + if (!(control & (HC_R0INT_ENA << LPFC_ELS_RING))) { + lpfc_debugfs_slow_ring_trc(phba, + "WRK Enable ring: cntl:x%x hacopy:x%x", + control, ha_copy, 0); + + control |= (HC_R0INT_ENA << LPFC_ELS_RING); + writel(control, phba->HCregaddr); + readl(phba->HCregaddr); /* flush */ + } else { + lpfc_debugfs_slow_ring_trc(phba, + "WRK Ring ok: cntl:x%x hacopy:x%x", + control, ha_copy, 0); + } + spin_unlock_irq(&phba->hbalock); + } + } + lpfc_work_list_done(phba); +} + +int +lpfc_do_work(void *p) +{ + struct lpfc_hba *phba = p; + int rc; + + set_user_nice(current, MIN_NICE); + current->flags |= PF_NOFREEZE; + phba->data_flags = 0; + + while (!kthread_should_stop()) { + /* wait and check worker queue activities */ + rc = wait_event_interruptible(phba->work_waitq, + (test_and_clear_bit(LPFC_DATA_READY, + &phba->data_flags) + || kthread_should_stop())); + /* Signal wakeup shall terminate the worker thread */ + if (rc) { + lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, + "0433 Wakeup on signal: rc=x%x\n", rc); + break; + } + + /* Attend pending lpfc data processing */ + lpfc_work_done(phba); + } + phba->worker_thread = NULL; + lpfc_printf_log(phba, KERN_INFO, LOG_ELS, + "0432 Worker thread stopped.\n"); + return 0; +} + +/* + * This is only called to handle FC worker events. Since this a rare + * occurrence, we allocate a struct lpfc_work_evt structure here instead of + * embedding it in the IOCB. + */ +int +lpfc_workq_post_event(struct lpfc_hba *phba, void *arg1, void *arg2, + uint32_t evt) +{ + struct lpfc_work_evt *evtp; + unsigned long flags; + + /* + * All Mailbox completions and LPFC_ELS_RING rcv ring IOCB events will + * be queued to worker thread for processing + */ + evtp = kmalloc(sizeof(struct lpfc_work_evt), GFP_ATOMIC); + if (!evtp) + return 0; + + evtp->evt_arg1 = arg1; + evtp->evt_arg2 = arg2; + evtp->evt = evt; + + spin_lock_irqsave(&phba->hbalock, flags); + list_add_tail(&evtp->evt_listp, &phba->work_list); + spin_unlock_irqrestore(&phba->hbalock, flags); + + lpfc_worker_wake_up(phba); + + return 1; +} + +void +lpfc_cleanup_rpis(struct lpfc_vport *vport, int remove) +{ + struct Scsi_Host *shost = lpfc_shost_from_vport(vport); + struct lpfc_hba *phba = vport->phba; + struct lpfc_nodelist *ndlp, *next_ndlp; + + list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) { + if (ndlp->nlp_state == NLP_STE_UNUSED_NODE) { + /* It's possible the FLOGI to the fabric node never + * successfully completed and never registered with the + * transport. In this case there is no way to clean up + * the node. + */ + if (ndlp->nlp_DID == Fabric_DID) { + if (ndlp->nlp_prev_state == + NLP_STE_UNUSED_NODE && + !ndlp->fc4_xpt_flags) + lpfc_nlp_put(ndlp); + } + continue; + } + + if ((phba->sli3_options & LPFC_SLI3_VPORT_TEARDOWN) || + ((vport->port_type == LPFC_NPIV_PORT) && + ((ndlp->nlp_DID == NameServer_DID) || + (ndlp->nlp_DID == FDMI_DID) || + (ndlp->nlp_DID == Fabric_Cntl_DID)))) + lpfc_unreg_rpi(vport, ndlp); + + /* Leave Fabric nodes alone on link down */ + if ((phba->sli_rev < LPFC_SLI_REV4) && + (!remove && ndlp->nlp_type & NLP_FABRIC)) + continue; + + /* Notify transport of connectivity loss to trigger cleanup. */ + if (phba->nvmet_support && + ndlp->nlp_state == NLP_STE_UNMAPPED_NODE) + lpfc_nvmet_invalidate_host(phba, ndlp); + + lpfc_disc_state_machine(vport, ndlp, NULL, + remove + ? NLP_EVT_DEVICE_RM + : NLP_EVT_DEVICE_RECOVERY); + } + if (phba->sli3_options & LPFC_SLI3_VPORT_TEARDOWN) { + if (phba->sli_rev == LPFC_SLI_REV4) + lpfc_sli4_unreg_all_rpis(vport); + lpfc_mbx_unreg_vpi(vport); + spin_lock_irq(shost->host_lock); + vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI; + spin_unlock_irq(shost->host_lock); + } +} + +void +lpfc_port_link_failure(struct lpfc_vport *vport) +{ + lpfc_vport_set_state(vport, FC_VPORT_LINKDOWN); + + /* Cleanup any outstanding received buffers */ + lpfc_cleanup_rcv_buffers(vport); + + /* Cleanup any outstanding RSCN activity */ + lpfc_els_flush_rscn(vport); + + /* Cleanup any outstanding ELS commands */ + lpfc_els_flush_cmd(vport); + + lpfc_cleanup_rpis(vport, 0); + + /* Turn off discovery timer if its running */ + lpfc_can_disctmo(vport); +} + +void +lpfc_linkdown_port(struct lpfc_vport *vport) +{ + struct lpfc_hba *phba = vport->phba; + struct Scsi_Host *shost = lpfc_shost_from_vport(vport); + + if (vport->cfg_enable_fc4_type != LPFC_ENABLE_NVME) + fc_host_post_event(shost, fc_get_event_number(), + FCH_EVT_LINKDOWN, 0); + + lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD, + "Link Down: state:x%x rtry:x%x flg:x%x", + vport->port_state, vport->fc_ns_retry, vport->fc_flag); + + lpfc_port_link_failure(vport); + + /* Stop delayed Nport discovery */ + spin_lock_irq(shost->host_lock); + vport->fc_flag &= ~FC_DISC_DELAYED; + spin_unlock_irq(shost->host_lock); + del_timer_sync(&vport->delayed_disc_tmo); + + if (phba->sli_rev == LPFC_SLI_REV4 && + vport->port_type == LPFC_PHYSICAL_PORT && + phba->sli4_hba.fawwpn_flag & LPFC_FAWWPN_CONFIG) { + /* Assume success on link up */ + phba->sli4_hba.fawwpn_flag |= LPFC_FAWWPN_FABRIC; + } +} + +int +lpfc_linkdown(struct lpfc_hba *phba) +{ + struct lpfc_vport *vport = phba->pport; + struct Scsi_Host *shost = lpfc_shost_from_vport(vport); + struct lpfc_vport **vports; + LPFC_MBOXQ_t *mb; + int i; + int offline; + + if (phba->link_state == LPFC_LINK_DOWN) + return 0; + + /* Block all SCSI stack I/Os */ + lpfc_scsi_dev_block(phba); + offline = pci_channel_offline(phba->pcidev); + + phba->defer_flogi_acc_flag = false; + + /* Clear external loopback plug detected flag */ + phba->link_flag &= ~LS_EXTERNAL_LOOPBACK; + + spin_lock_irq(&phba->hbalock); + phba->fcf.fcf_flag &= ~(FCF_AVAILABLE | FCF_SCAN_DONE); + spin_unlock_irq(&phba->hbalock); + if (phba->link_state > LPFC_LINK_DOWN) { + phba->link_state = LPFC_LINK_DOWN; + if (phba->sli4_hba.conf_trunk) { + phba->trunk_link.link0.state = 0; + phba->trunk_link.link1.state = 0; + phba->trunk_link.link2.state = 0; + phba->trunk_link.link3.state = 0; + phba->trunk_link.phy_lnk_speed = + LPFC_LINK_SPEED_UNKNOWN; + phba->sli4_hba.link_state.logical_speed = + LPFC_LINK_SPEED_UNKNOWN; + } + spin_lock_irq(shost->host_lock); + phba->pport->fc_flag &= ~FC_LBIT; + spin_unlock_irq(shost->host_lock); + } + vports = lpfc_create_vport_work_array(phba); + if (vports != NULL) { + for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) { + /* Issue a LINK DOWN event to all nodes */ + lpfc_linkdown_port(vports[i]); + + vports[i]->fc_myDID = 0; + + if ((vport->cfg_enable_fc4_type == LPFC_ENABLE_BOTH) || + (vport->cfg_enable_fc4_type == LPFC_ENABLE_NVME)) { + if (phba->nvmet_support) + lpfc_nvmet_update_targetport(phba); + else + lpfc_nvme_update_localport(vports[i]); + } + } + } + lpfc_destroy_vport_work_array(phba, vports); + + /* Clean up any SLI3 firmware default rpi's */ + if (phba->sli_rev > LPFC_SLI_REV3 || offline) + goto skip_unreg_did; + + mb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + if (mb) { + lpfc_unreg_did(phba, 0xffff, LPFC_UNREG_ALL_DFLT_RPIS, mb); + mb->vport = vport; + mb->mbox_cmpl = lpfc_sli_def_mbox_cmpl; + if (lpfc_sli_issue_mbox(phba, mb, MBX_NOWAIT) + == MBX_NOT_FINISHED) { + mempool_free(mb, phba->mbox_mem_pool); + } + } + + skip_unreg_did: + /* Setup myDID for link up if we are in pt2pt mode */ + if (phba->pport->fc_flag & FC_PT2PT) { + mb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + if (mb) { + lpfc_config_link(phba, mb); + mb->mbox_cmpl = lpfc_sli_def_mbox_cmpl; + mb->vport = vport; + if (lpfc_sli_issue_mbox(phba, mb, MBX_NOWAIT) + == MBX_NOT_FINISHED) { + mempool_free(mb, phba->mbox_mem_pool); + } + } + spin_lock_irq(shost->host_lock); + phba->pport->fc_flag &= ~(FC_PT2PT | FC_PT2PT_PLOGI); + phba->pport->rcv_flogi_cnt = 0; + spin_unlock_irq(shost->host_lock); + } + return 0; +} + +static void +lpfc_linkup_cleanup_nodes(struct lpfc_vport *vport) +{ + struct lpfc_nodelist *ndlp; + + list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) { + ndlp->nlp_fc4_type &= ~(NLP_FC4_FCP | NLP_FC4_NVME); + + if (ndlp->nlp_state == NLP_STE_UNUSED_NODE) + continue; + if (ndlp->nlp_type & NLP_FABRIC) { + /* On Linkup its safe to clean up the ndlp + * from Fabric connections. + */ + if (ndlp->nlp_DID != Fabric_DID) + lpfc_unreg_rpi(vport, ndlp); + lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE); + } else if (!(ndlp->nlp_flag & NLP_NPR_ADISC)) { + /* Fail outstanding IO now since device is + * marked for PLOGI. + */ + lpfc_unreg_rpi(vport, ndlp); + } + } +} + +static void +lpfc_linkup_port(struct lpfc_vport *vport) +{ + struct Scsi_Host *shost = lpfc_shost_from_vport(vport); + struct lpfc_hba *phba = vport->phba; + + if ((vport->load_flag & FC_UNLOADING) != 0) + return; + + lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD, + "Link Up: top:x%x speed:x%x flg:x%x", + phba->fc_topology, phba->fc_linkspeed, phba->link_flag); + + /* If NPIV is not enabled, only bring the physical port up */ + if (!(phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) && + (vport != phba->pport)) + return; + + if (vport->cfg_enable_fc4_type != LPFC_ENABLE_NVME) + fc_host_post_event(shost, fc_get_event_number(), + FCH_EVT_LINKUP, 0); + + spin_lock_irq(shost->host_lock); + if (phba->defer_flogi_acc_flag) + vport->fc_flag &= ~(FC_ABORT_DISCOVERY | FC_RSCN_MODE | + FC_NLP_MORE | FC_RSCN_DISCOVERY); + else + vport->fc_flag &= ~(FC_PT2PT | FC_PT2PT_PLOGI | + FC_ABORT_DISCOVERY | FC_RSCN_MODE | + FC_NLP_MORE | FC_RSCN_DISCOVERY); + vport->fc_flag |= FC_NDISC_ACTIVE; + vport->fc_ns_retry = 0; + spin_unlock_irq(shost->host_lock); + lpfc_setup_fdmi_mask(vport); + + lpfc_linkup_cleanup_nodes(vport); +} + +static int +lpfc_linkup(struct lpfc_hba *phba) +{ + struct lpfc_vport **vports; + int i; + struct Scsi_Host *shost = lpfc_shost_from_vport(phba->pport); + + phba->link_state = LPFC_LINK_UP; + + /* Unblock fabric iocbs if they are blocked */ + clear_bit(FABRIC_COMANDS_BLOCKED, &phba->bit_flags); + del_timer_sync(&phba->fabric_block_timer); + + vports = lpfc_create_vport_work_array(phba); + if (vports != NULL) + for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) + lpfc_linkup_port(vports[i]); + lpfc_destroy_vport_work_array(phba, vports); + + /* Clear the pport flogi counter in case the link down was + * absorbed without an ACQE. No lock here - in worker thread + * and discovery is synchronized. + */ + spin_lock_irq(shost->host_lock); + phba->pport->rcv_flogi_cnt = 0; + spin_unlock_irq(shost->host_lock); + + /* reinitialize initial HBA flag */ + phba->hba_flag &= ~(HBA_FLOGI_ISSUED | HBA_RHBA_CMPL); + + return 0; +} + +/* + * This routine handles processing a CLEAR_LA mailbox + * command upon completion. It is setup in the LPFC_MBOXQ + * as the completion routine when the command is + * handed off to the SLI layer. SLI3 only. + */ +static void +lpfc_mbx_cmpl_clear_la(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) +{ + struct lpfc_vport *vport = pmb->vport; + struct Scsi_Host *shost = lpfc_shost_from_vport(vport); + struct lpfc_sli *psli = &phba->sli; + MAILBOX_t *mb = &pmb->u.mb; + uint32_t control; + + /* Since we don't do discovery right now, turn these off here */ + psli->sli3_ring[LPFC_EXTRA_RING].flag &= ~LPFC_STOP_IOCB_EVENT; + psli->sli3_ring[LPFC_FCP_RING].flag &= ~LPFC_STOP_IOCB_EVENT; + + /* Check for error */ + if ((mb->mbxStatus) && (mb->mbxStatus != 0x1601)) { + /* CLEAR_LA mbox error <mbxStatus> state <hba_state> */ + lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, + "0320 CLEAR_LA mbxStatus error x%x hba " + "state x%x\n", + mb->mbxStatus, vport->port_state); + phba->link_state = LPFC_HBA_ERROR; + goto out; + } + + if (vport->port_type == LPFC_PHYSICAL_PORT) + phba->link_state = LPFC_HBA_READY; + + spin_lock_irq(&phba->hbalock); + psli->sli_flag |= LPFC_PROCESS_LA; + control = readl(phba->HCregaddr); + control |= HC_LAINT_ENA; + writel(control, phba->HCregaddr); + readl(phba->HCregaddr); /* flush */ + spin_unlock_irq(&phba->hbalock); + mempool_free(pmb, phba->mbox_mem_pool); + return; + +out: + /* Device Discovery completes */ + lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY, + "0225 Device Discovery completes\n"); + mempool_free(pmb, phba->mbox_mem_pool); + + spin_lock_irq(shost->host_lock); + vport->fc_flag &= ~FC_ABORT_DISCOVERY; + spin_unlock_irq(shost->host_lock); + + lpfc_can_disctmo(vport); + + /* turn on Link Attention interrupts */ + + spin_lock_irq(&phba->hbalock); + psli->sli_flag |= LPFC_PROCESS_LA; + control = readl(phba->HCregaddr); + control |= HC_LAINT_ENA; + writel(control, phba->HCregaddr); + readl(phba->HCregaddr); /* flush */ + spin_unlock_irq(&phba->hbalock); + + return; +} + +void +lpfc_mbx_cmpl_local_config_link(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) +{ + struct lpfc_vport *vport = pmb->vport; + LPFC_MBOXQ_t *sparam_mb; + u16 status = pmb->u.mb.mbxStatus; + int rc; + + mempool_free(pmb, phba->mbox_mem_pool); + + if (status) + goto out; + + /* don't perform discovery for SLI4 loopback diagnostic test */ + if ((phba->sli_rev == LPFC_SLI_REV4) && + !(phba->hba_flag & HBA_FCOE_MODE) && + (phba->link_flag & LS_LOOPBACK_MODE)) + return; + + if (phba->fc_topology == LPFC_TOPOLOGY_LOOP && + vport->fc_flag & FC_PUBLIC_LOOP && + !(vport->fc_flag & FC_LBIT)) { + /* Need to wait for FAN - use discovery timer + * for timeout. port_state is identically + * LPFC_LOCAL_CFG_LINK while waiting for FAN + */ + lpfc_set_disctmo(vport); + return; + } + + /* Start discovery by sending a FLOGI. port_state is identically + * LPFC_FLOGI while waiting for FLOGI cmpl. + */ + if (vport->port_state != LPFC_FLOGI) { + /* Issue MBX_READ_SPARAM to update CSPs before FLOGI if + * bb-credit recovery is in place. + */ + if (phba->bbcredit_support && phba->cfg_enable_bbcr && + !(phba->link_flag & LS_LOOPBACK_MODE)) { + sparam_mb = mempool_alloc(phba->mbox_mem_pool, + GFP_KERNEL); + if (!sparam_mb) + goto sparam_out; + + rc = lpfc_read_sparam(phba, sparam_mb, 0); + if (rc) { + mempool_free(sparam_mb, phba->mbox_mem_pool); + goto sparam_out; + } + sparam_mb->vport = vport; + sparam_mb->mbox_cmpl = lpfc_mbx_cmpl_read_sparam; + rc = lpfc_sli_issue_mbox(phba, sparam_mb, MBX_NOWAIT); + if (rc == MBX_NOT_FINISHED) { + lpfc_mbox_rsrc_cleanup(phba, sparam_mb, + MBOX_THD_UNLOCKED); + goto sparam_out; + } + + phba->hba_flag |= HBA_DEFER_FLOGI; + } else { + lpfc_initial_flogi(vport); + } + } else { + if (vport->fc_flag & FC_PT2PT) + lpfc_disc_start(vport); + } + return; + +out: + lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, + "0306 CONFIG_LINK mbxStatus error x%x HBA state x%x\n", + status, vport->port_state); + +sparam_out: + lpfc_linkdown(phba); + + lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, + "0200 CONFIG_LINK bad hba state x%x\n", + vport->port_state); + + lpfc_issue_clear_la(phba, vport); + return; +} + +/** + * lpfc_sli4_clear_fcf_rr_bmask + * @phba: pointer to the struct lpfc_hba for this port. + * This fucnction resets the round robin bit mask and clears the + * fcf priority list. The list deletions are done while holding the + * hbalock. The ON_LIST flag and the FLOGI_FAILED flags are cleared + * from the lpfc_fcf_pri record. + **/ +void +lpfc_sli4_clear_fcf_rr_bmask(struct lpfc_hba *phba) +{ + struct lpfc_fcf_pri *fcf_pri; + struct lpfc_fcf_pri *next_fcf_pri; + memset(phba->fcf.fcf_rr_bmask, 0, sizeof(*phba->fcf.fcf_rr_bmask)); + spin_lock_irq(&phba->hbalock); + list_for_each_entry_safe(fcf_pri, next_fcf_pri, + &phba->fcf.fcf_pri_list, list) { + list_del_init(&fcf_pri->list); + fcf_pri->fcf_rec.flag = 0; + } + spin_unlock_irq(&phba->hbalock); +} +static void +lpfc_mbx_cmpl_reg_fcfi(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) +{ + struct lpfc_vport *vport = mboxq->vport; + + if (mboxq->u.mb.mbxStatus) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, + "2017 REG_FCFI mbxStatus error x%x " + "HBA state x%x\n", mboxq->u.mb.mbxStatus, + vport->port_state); + goto fail_out; + } + + /* Start FCoE discovery by sending a FLOGI. */ + phba->fcf.fcfi = bf_get(lpfc_reg_fcfi_fcfi, &mboxq->u.mqe.un.reg_fcfi); + /* Set the FCFI registered flag */ + spin_lock_irq(&phba->hbalock); + phba->fcf.fcf_flag |= FCF_REGISTERED; + spin_unlock_irq(&phba->hbalock); + + /* If there is a pending FCoE event, restart FCF table scan. */ + if ((!(phba->hba_flag & FCF_RR_INPROG)) && + lpfc_check_pending_fcoe_event(phba, LPFC_UNREG_FCF)) + goto fail_out; + + /* Mark successful completion of FCF table scan */ + spin_lock_irq(&phba->hbalock); + phba->fcf.fcf_flag |= (FCF_SCAN_DONE | FCF_IN_USE); + phba->hba_flag &= ~FCF_TS_INPROG; + if (vport->port_state != LPFC_FLOGI) { + phba->hba_flag |= FCF_RR_INPROG; + spin_unlock_irq(&phba->hbalock); + lpfc_issue_init_vfi(vport); + goto out; + } + spin_unlock_irq(&phba->hbalock); + goto out; + +fail_out: + spin_lock_irq(&phba->hbalock); + phba->hba_flag &= ~FCF_RR_INPROG; + spin_unlock_irq(&phba->hbalock); +out: + mempool_free(mboxq, phba->mbox_mem_pool); +} + +/** + * lpfc_fab_name_match - Check if the fcf fabric name match. + * @fab_name: pointer to fabric name. + * @new_fcf_record: pointer to fcf record. + * + * This routine compare the fcf record's fabric name with provided + * fabric name. If the fabric name are identical this function + * returns 1 else return 0. + **/ +static uint32_t +lpfc_fab_name_match(uint8_t *fab_name, struct fcf_record *new_fcf_record) +{ + if (fab_name[0] != bf_get(lpfc_fcf_record_fab_name_0, new_fcf_record)) + return 0; + if (fab_name[1] != bf_get(lpfc_fcf_record_fab_name_1, new_fcf_record)) + return 0; + if (fab_name[2] != bf_get(lpfc_fcf_record_fab_name_2, new_fcf_record)) + return 0; + if (fab_name[3] != bf_get(lpfc_fcf_record_fab_name_3, new_fcf_record)) + return 0; + if (fab_name[4] != bf_get(lpfc_fcf_record_fab_name_4, new_fcf_record)) + return 0; + if (fab_name[5] != bf_get(lpfc_fcf_record_fab_name_5, new_fcf_record)) + return 0; + if (fab_name[6] != bf_get(lpfc_fcf_record_fab_name_6, new_fcf_record)) + return 0; + if (fab_name[7] != bf_get(lpfc_fcf_record_fab_name_7, new_fcf_record)) + return 0; + return 1; +} + +/** + * lpfc_sw_name_match - Check if the fcf switch name match. + * @sw_name: pointer to switch name. + * @new_fcf_record: pointer to fcf record. + * + * This routine compare the fcf record's switch name with provided + * switch name. If the switch name are identical this function + * returns 1 else return 0. + **/ +static uint32_t +lpfc_sw_name_match(uint8_t *sw_name, struct fcf_record *new_fcf_record) +{ + if (sw_name[0] != bf_get(lpfc_fcf_record_switch_name_0, new_fcf_record)) + return 0; + if (sw_name[1] != bf_get(lpfc_fcf_record_switch_name_1, new_fcf_record)) + return 0; + if (sw_name[2] != bf_get(lpfc_fcf_record_switch_name_2, new_fcf_record)) + return 0; + if (sw_name[3] != bf_get(lpfc_fcf_record_switch_name_3, new_fcf_record)) + return 0; + if (sw_name[4] != bf_get(lpfc_fcf_record_switch_name_4, new_fcf_record)) + return 0; + if (sw_name[5] != bf_get(lpfc_fcf_record_switch_name_5, new_fcf_record)) + return 0; + if (sw_name[6] != bf_get(lpfc_fcf_record_switch_name_6, new_fcf_record)) + return 0; + if (sw_name[7] != bf_get(lpfc_fcf_record_switch_name_7, new_fcf_record)) + return 0; + return 1; +} + +/** + * lpfc_mac_addr_match - Check if the fcf mac address match. + * @mac_addr: pointer to mac address. + * @new_fcf_record: pointer to fcf record. + * + * This routine compare the fcf record's mac address with HBA's + * FCF mac address. If the mac addresses are identical this function + * returns 1 else return 0. + **/ +static uint32_t +lpfc_mac_addr_match(uint8_t *mac_addr, struct fcf_record *new_fcf_record) +{ + if (mac_addr[0] != bf_get(lpfc_fcf_record_mac_0, new_fcf_record)) + return 0; + if (mac_addr[1] != bf_get(lpfc_fcf_record_mac_1, new_fcf_record)) + return 0; + if (mac_addr[2] != bf_get(lpfc_fcf_record_mac_2, new_fcf_record)) + return 0; + if (mac_addr[3] != bf_get(lpfc_fcf_record_mac_3, new_fcf_record)) + return 0; + if (mac_addr[4] != bf_get(lpfc_fcf_record_mac_4, new_fcf_record)) + return 0; + if (mac_addr[5] != bf_get(lpfc_fcf_record_mac_5, new_fcf_record)) + return 0; + return 1; +} + +static bool +lpfc_vlan_id_match(uint16_t curr_vlan_id, uint16_t new_vlan_id) +{ + return (curr_vlan_id == new_vlan_id); +} + +/** + * __lpfc_update_fcf_record_pri - update the lpfc_fcf_pri record. + * @phba: pointer to lpfc hba data structure. + * @fcf_index: Index for the lpfc_fcf_record. + * @new_fcf_record: pointer to hba fcf record. + * + * This routine updates the driver FCF priority record from the new HBA FCF + * record. The hbalock is asserted held in the code path calling this + * routine. + **/ +static void +__lpfc_update_fcf_record_pri(struct lpfc_hba *phba, uint16_t fcf_index, + struct fcf_record *new_fcf_record + ) +{ + struct lpfc_fcf_pri *fcf_pri; + + fcf_pri = &phba->fcf.fcf_pri[fcf_index]; + fcf_pri->fcf_rec.fcf_index = fcf_index; + /* FCF record priority */ + fcf_pri->fcf_rec.priority = new_fcf_record->fip_priority; + +} + +/** + * lpfc_copy_fcf_record - Copy fcf information to lpfc_hba. + * @fcf_rec: pointer to driver fcf record. + * @new_fcf_record: pointer to fcf record. + * + * This routine copies the FCF information from the FCF + * record to lpfc_hba data structure. + **/ +static void +lpfc_copy_fcf_record(struct lpfc_fcf_rec *fcf_rec, + struct fcf_record *new_fcf_record) +{ + /* Fabric name */ + fcf_rec->fabric_name[0] = + bf_get(lpfc_fcf_record_fab_name_0, new_fcf_record); + fcf_rec->fabric_name[1] = + bf_get(lpfc_fcf_record_fab_name_1, new_fcf_record); + fcf_rec->fabric_name[2] = + bf_get(lpfc_fcf_record_fab_name_2, new_fcf_record); + fcf_rec->fabric_name[3] = + bf_get(lpfc_fcf_record_fab_name_3, new_fcf_record); + fcf_rec->fabric_name[4] = + bf_get(lpfc_fcf_record_fab_name_4, new_fcf_record); + fcf_rec->fabric_name[5] = + bf_get(lpfc_fcf_record_fab_name_5, new_fcf_record); + fcf_rec->fabric_name[6] = + bf_get(lpfc_fcf_record_fab_name_6, new_fcf_record); + fcf_rec->fabric_name[7] = + bf_get(lpfc_fcf_record_fab_name_7, new_fcf_record); + /* Mac address */ + fcf_rec->mac_addr[0] = bf_get(lpfc_fcf_record_mac_0, new_fcf_record); + fcf_rec->mac_addr[1] = bf_get(lpfc_fcf_record_mac_1, new_fcf_record); + fcf_rec->mac_addr[2] = bf_get(lpfc_fcf_record_mac_2, new_fcf_record); + fcf_rec->mac_addr[3] = bf_get(lpfc_fcf_record_mac_3, new_fcf_record); + fcf_rec->mac_addr[4] = bf_get(lpfc_fcf_record_mac_4, new_fcf_record); + fcf_rec->mac_addr[5] = bf_get(lpfc_fcf_record_mac_5, new_fcf_record); + /* FCF record index */ + fcf_rec->fcf_indx = bf_get(lpfc_fcf_record_fcf_index, new_fcf_record); + /* FCF record priority */ + fcf_rec->priority = new_fcf_record->fip_priority; + /* Switch name */ + fcf_rec->switch_name[0] = + bf_get(lpfc_fcf_record_switch_name_0, new_fcf_record); + fcf_rec->switch_name[1] = + bf_get(lpfc_fcf_record_switch_name_1, new_fcf_record); + fcf_rec->switch_name[2] = + bf_get(lpfc_fcf_record_switch_name_2, new_fcf_record); + fcf_rec->switch_name[3] = + bf_get(lpfc_fcf_record_switch_name_3, new_fcf_record); + fcf_rec->switch_name[4] = + bf_get(lpfc_fcf_record_switch_name_4, new_fcf_record); + fcf_rec->switch_name[5] = + bf_get(lpfc_fcf_record_switch_name_5, new_fcf_record); + fcf_rec->switch_name[6] = + bf_get(lpfc_fcf_record_switch_name_6, new_fcf_record); + fcf_rec->switch_name[7] = + bf_get(lpfc_fcf_record_switch_name_7, new_fcf_record); +} + +/** + * __lpfc_update_fcf_record - Update driver fcf record + * @phba: pointer to lpfc hba data structure. + * @fcf_rec: pointer to driver fcf record. + * @new_fcf_record: pointer to hba fcf record. + * @addr_mode: address mode to be set to the driver fcf record. + * @vlan_id: vlan tag to be set to the driver fcf record. + * @flag: flag bits to be set to the driver fcf record. + * + * This routine updates the driver FCF record from the new HBA FCF record + * together with the address mode, vlan_id, and other informations. This + * routine is called with the hbalock held. + **/ +static void +__lpfc_update_fcf_record(struct lpfc_hba *phba, struct lpfc_fcf_rec *fcf_rec, + struct fcf_record *new_fcf_record, uint32_t addr_mode, + uint16_t vlan_id, uint32_t flag) +{ + lockdep_assert_held(&phba->hbalock); + + /* Copy the fields from the HBA's FCF record */ + lpfc_copy_fcf_record(fcf_rec, new_fcf_record); + /* Update other fields of driver FCF record */ + fcf_rec->addr_mode = addr_mode; + fcf_rec->vlan_id = vlan_id; + fcf_rec->flag |= (flag | RECORD_VALID); + __lpfc_update_fcf_record_pri(phba, + bf_get(lpfc_fcf_record_fcf_index, new_fcf_record), + new_fcf_record); +} + +/** + * lpfc_register_fcf - Register the FCF with hba. + * @phba: pointer to lpfc hba data structure. + * + * This routine issues a register fcfi mailbox command to register + * the fcf with HBA. + **/ +static void +lpfc_register_fcf(struct lpfc_hba *phba) +{ + LPFC_MBOXQ_t *fcf_mbxq; + int rc; + + spin_lock_irq(&phba->hbalock); + /* If the FCF is not available do nothing. */ + if (!(phba->fcf.fcf_flag & FCF_AVAILABLE)) { + phba->hba_flag &= ~(FCF_TS_INPROG | FCF_RR_INPROG); + spin_unlock_irq(&phba->hbalock); + return; + } + + /* The FCF is already registered, start discovery */ + if (phba->fcf.fcf_flag & FCF_REGISTERED) { + phba->fcf.fcf_flag |= (FCF_SCAN_DONE | FCF_IN_USE); + phba->hba_flag &= ~FCF_TS_INPROG; + if (phba->pport->port_state != LPFC_FLOGI && + phba->pport->fc_flag & FC_FABRIC) { + phba->hba_flag |= FCF_RR_INPROG; + spin_unlock_irq(&phba->hbalock); + lpfc_initial_flogi(phba->pport); + return; + } + spin_unlock_irq(&phba->hbalock); + return; + } + spin_unlock_irq(&phba->hbalock); + + fcf_mbxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + if (!fcf_mbxq) { + spin_lock_irq(&phba->hbalock); + phba->hba_flag &= ~(FCF_TS_INPROG | FCF_RR_INPROG); + spin_unlock_irq(&phba->hbalock); + return; + } + + lpfc_reg_fcfi(phba, fcf_mbxq); + fcf_mbxq->vport = phba->pport; + fcf_mbxq->mbox_cmpl = lpfc_mbx_cmpl_reg_fcfi; + rc = lpfc_sli_issue_mbox(phba, fcf_mbxq, MBX_NOWAIT); + if (rc == MBX_NOT_FINISHED) { + spin_lock_irq(&phba->hbalock); + phba->hba_flag &= ~(FCF_TS_INPROG | FCF_RR_INPROG); + spin_unlock_irq(&phba->hbalock); + mempool_free(fcf_mbxq, phba->mbox_mem_pool); + } + + return; +} + +/** + * lpfc_match_fcf_conn_list - Check if the FCF record can be used for discovery. + * @phba: pointer to lpfc hba data structure. + * @new_fcf_record: pointer to fcf record. + * @boot_flag: Indicates if this record used by boot bios. + * @addr_mode: The address mode to be used by this FCF + * @vlan_id: The vlan id to be used as vlan tagging by this FCF. + * + * This routine compare the fcf record with connect list obtained from the + * config region to decide if this FCF can be used for SAN discovery. It returns + * 1 if this record can be used for SAN discovery else return zero. If this FCF + * record can be used for SAN discovery, the boot_flag will indicate if this FCF + * is used by boot bios and addr_mode will indicate the addressing mode to be + * used for this FCF when the function returns. + * If the FCF record need to be used with a particular vlan id, the vlan is + * set in the vlan_id on return of the function. If not VLAN tagging need to + * be used with the FCF vlan_id will be set to LPFC_FCOE_NULL_VID; + **/ +static int +lpfc_match_fcf_conn_list(struct lpfc_hba *phba, + struct fcf_record *new_fcf_record, + uint32_t *boot_flag, uint32_t *addr_mode, + uint16_t *vlan_id) +{ + struct lpfc_fcf_conn_entry *conn_entry; + int i, j, fcf_vlan_id = 0; + + /* Find the lowest VLAN id in the FCF record */ + for (i = 0; i < 512; i++) { + if (new_fcf_record->vlan_bitmap[i]) { + fcf_vlan_id = i * 8; + j = 0; + while (!((new_fcf_record->vlan_bitmap[i] >> j) & 1)) { + j++; + fcf_vlan_id++; + } + break; + } + } + + /* FCF not valid/available or solicitation in progress */ + if (!bf_get(lpfc_fcf_record_fcf_avail, new_fcf_record) || + !bf_get(lpfc_fcf_record_fcf_valid, new_fcf_record) || + bf_get(lpfc_fcf_record_fcf_sol, new_fcf_record)) + return 0; + + if (!(phba->hba_flag & HBA_FIP_SUPPORT)) { + *boot_flag = 0; + *addr_mode = bf_get(lpfc_fcf_record_mac_addr_prov, + new_fcf_record); + if (phba->valid_vlan) + *vlan_id = phba->vlan_id; + else + *vlan_id = LPFC_FCOE_NULL_VID; + return 1; + } + + /* + * If there are no FCF connection table entry, driver connect to all + * FCFs. + */ + if (list_empty(&phba->fcf_conn_rec_list)) { + *boot_flag = 0; + *addr_mode = bf_get(lpfc_fcf_record_mac_addr_prov, + new_fcf_record); + + /* + * When there are no FCF connect entries, use driver's default + * addressing mode - FPMA. + */ + if (*addr_mode & LPFC_FCF_FPMA) + *addr_mode = LPFC_FCF_FPMA; + + /* If FCF record report a vlan id use that vlan id */ + if (fcf_vlan_id) + *vlan_id = fcf_vlan_id; + else + *vlan_id = LPFC_FCOE_NULL_VID; + return 1; + } + + list_for_each_entry(conn_entry, + &phba->fcf_conn_rec_list, list) { + if (!(conn_entry->conn_rec.flags & FCFCNCT_VALID)) + continue; + + if ((conn_entry->conn_rec.flags & FCFCNCT_FBNM_VALID) && + !lpfc_fab_name_match(conn_entry->conn_rec.fabric_name, + new_fcf_record)) + continue; + if ((conn_entry->conn_rec.flags & FCFCNCT_SWNM_VALID) && + !lpfc_sw_name_match(conn_entry->conn_rec.switch_name, + new_fcf_record)) + continue; + if (conn_entry->conn_rec.flags & FCFCNCT_VLAN_VALID) { + /* + * If the vlan bit map does not have the bit set for the + * vlan id to be used, then it is not a match. + */ + if (!(new_fcf_record->vlan_bitmap + [conn_entry->conn_rec.vlan_tag / 8] & + (1 << (conn_entry->conn_rec.vlan_tag % 8)))) + continue; + } + + /* + * If connection record does not support any addressing mode, + * skip the FCF record. + */ + if (!(bf_get(lpfc_fcf_record_mac_addr_prov, new_fcf_record) + & (LPFC_FCF_FPMA | LPFC_FCF_SPMA))) + continue; + + /* + * Check if the connection record specifies a required + * addressing mode. + */ + if ((conn_entry->conn_rec.flags & FCFCNCT_AM_VALID) && + !(conn_entry->conn_rec.flags & FCFCNCT_AM_PREFERRED)) { + + /* + * If SPMA required but FCF not support this continue. + */ + if ((conn_entry->conn_rec.flags & FCFCNCT_AM_SPMA) && + !(bf_get(lpfc_fcf_record_mac_addr_prov, + new_fcf_record) & LPFC_FCF_SPMA)) + continue; + + /* + * If FPMA required but FCF not support this continue. + */ + if (!(conn_entry->conn_rec.flags & FCFCNCT_AM_SPMA) && + !(bf_get(lpfc_fcf_record_mac_addr_prov, + new_fcf_record) & LPFC_FCF_FPMA)) + continue; + } + + /* + * This fcf record matches filtering criteria. + */ + if (conn_entry->conn_rec.flags & FCFCNCT_BOOT) + *boot_flag = 1; + else + *boot_flag = 0; + + /* + * If user did not specify any addressing mode, or if the + * preferred addressing mode specified by user is not supported + * by FCF, allow fabric to pick the addressing mode. + */ + *addr_mode = bf_get(lpfc_fcf_record_mac_addr_prov, + new_fcf_record); + /* + * If the user specified a required address mode, assign that + * address mode + */ + if ((conn_entry->conn_rec.flags & FCFCNCT_AM_VALID) && + (!(conn_entry->conn_rec.flags & FCFCNCT_AM_PREFERRED))) + *addr_mode = (conn_entry->conn_rec.flags & + FCFCNCT_AM_SPMA) ? + LPFC_FCF_SPMA : LPFC_FCF_FPMA; + /* + * If the user specified a preferred address mode, use the + * addr mode only if FCF support the addr_mode. + */ + else if ((conn_entry->conn_rec.flags & FCFCNCT_AM_VALID) && + (conn_entry->conn_rec.flags & FCFCNCT_AM_PREFERRED) && + (conn_entry->conn_rec.flags & FCFCNCT_AM_SPMA) && + (*addr_mode & LPFC_FCF_SPMA)) + *addr_mode = LPFC_FCF_SPMA; + else if ((conn_entry->conn_rec.flags & FCFCNCT_AM_VALID) && + (conn_entry->conn_rec.flags & FCFCNCT_AM_PREFERRED) && + !(conn_entry->conn_rec.flags & FCFCNCT_AM_SPMA) && + (*addr_mode & LPFC_FCF_FPMA)) + *addr_mode = LPFC_FCF_FPMA; + + /* If matching connect list has a vlan id, use it */ + if (conn_entry->conn_rec.flags & FCFCNCT_VLAN_VALID) + *vlan_id = conn_entry->conn_rec.vlan_tag; + /* + * If no vlan id is specified in connect list, use the vlan id + * in the FCF record + */ + else if (fcf_vlan_id) + *vlan_id = fcf_vlan_id; + else + *vlan_id = LPFC_FCOE_NULL_VID; + + return 1; + } + + return 0; +} + +/** + * lpfc_check_pending_fcoe_event - Check if there is pending fcoe event. + * @phba: pointer to lpfc hba data structure. + * @unreg_fcf: Unregister FCF if FCF table need to be re-scaned. + * + * This function check if there is any fcoe event pending while driver + * scan FCF entries. If there is any pending event, it will restart the + * FCF saning and return 1 else return 0. + */ +int +lpfc_check_pending_fcoe_event(struct lpfc_hba *phba, uint8_t unreg_fcf) +{ + /* + * If the Link is up and no FCoE events while in the + * FCF discovery, no need to restart FCF discovery. + */ + if ((phba->link_state >= LPFC_LINK_UP) && + (phba->fcoe_eventtag == phba->fcoe_eventtag_at_fcf_scan)) + return 0; + + lpfc_printf_log(phba, KERN_INFO, LOG_FIP, + "2768 Pending link or FCF event during current " + "handling of the previous event: link_state:x%x, " + "evt_tag_at_scan:x%x, evt_tag_current:x%x\n", + phba->link_state, phba->fcoe_eventtag_at_fcf_scan, + phba->fcoe_eventtag); + + spin_lock_irq(&phba->hbalock); + phba->fcf.fcf_flag &= ~FCF_AVAILABLE; + spin_unlock_irq(&phba->hbalock); + + if (phba->link_state >= LPFC_LINK_UP) { + lpfc_printf_log(phba, KERN_INFO, LOG_FIP | LOG_DISCOVERY, + "2780 Restart FCF table scan due to " + "pending FCF event:evt_tag_at_scan:x%x, " + "evt_tag_current:x%x\n", + phba->fcoe_eventtag_at_fcf_scan, + phba->fcoe_eventtag); + lpfc_sli4_fcf_scan_read_fcf_rec(phba, LPFC_FCOE_FCF_GET_FIRST); + } else { + /* + * Do not continue FCF discovery and clear FCF_TS_INPROG + * flag + */ + lpfc_printf_log(phba, KERN_INFO, LOG_FIP | LOG_DISCOVERY, + "2833 Stop FCF discovery process due to link " + "state change (x%x)\n", phba->link_state); + spin_lock_irq(&phba->hbalock); + phba->hba_flag &= ~(FCF_TS_INPROG | FCF_RR_INPROG); + phba->fcf.fcf_flag &= ~(FCF_REDISC_FOV | FCF_DISCOVERY); + spin_unlock_irq(&phba->hbalock); + } + + /* Unregister the currently registered FCF if required */ + if (unreg_fcf) { + spin_lock_irq(&phba->hbalock); + phba->fcf.fcf_flag &= ~FCF_REGISTERED; + spin_unlock_irq(&phba->hbalock); + lpfc_sli4_unregister_fcf(phba); + } + return 1; +} + +/** + * lpfc_sli4_new_fcf_random_select - Randomly select an eligible new fcf record + * @phba: pointer to lpfc hba data structure. + * @fcf_cnt: number of eligible fcf record seen so far. + * + * This function makes an running random selection decision on FCF record to + * use through a sequence of @fcf_cnt eligible FCF records with equal + * probability. To perform integer manunipulation of random numbers with + * size unit32_t, a 16-bit random number returned from get_random_u16() is + * taken as the random random number generated. + * + * Returns true when outcome is for the newly read FCF record should be + * chosen; otherwise, return false when outcome is for keeping the previously + * chosen FCF record. + **/ +static bool +lpfc_sli4_new_fcf_random_select(struct lpfc_hba *phba, uint32_t fcf_cnt) +{ + uint32_t rand_num; + + /* Get 16-bit uniform random number */ + rand_num = get_random_u16(); + + /* Decision with probability 1/fcf_cnt */ + if ((fcf_cnt * rand_num) < 0xFFFF) + return true; + else + return false; +} + +/** + * lpfc_sli4_fcf_rec_mbox_parse - Parse read_fcf mbox command. + * @phba: pointer to lpfc hba data structure. + * @mboxq: pointer to mailbox object. + * @next_fcf_index: pointer to holder of next fcf index. + * + * This routine parses the non-embedded fcf mailbox command by performing the + * necessarily error checking, non-embedded read FCF record mailbox command + * SGE parsing, and endianness swapping. + * + * Returns the pointer to the new FCF record in the non-embedded mailbox + * command DMA memory if successfully, other NULL. + */ +static struct fcf_record * +lpfc_sli4_fcf_rec_mbox_parse(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq, + uint16_t *next_fcf_index) +{ + void *virt_addr; + struct lpfc_mbx_sge sge; + struct lpfc_mbx_read_fcf_tbl *read_fcf; + uint32_t shdr_status, shdr_add_status, if_type; + union lpfc_sli4_cfg_shdr *shdr; + struct fcf_record *new_fcf_record; + + /* Get the first SGE entry from the non-embedded DMA memory. This + * routine only uses a single SGE. + */ + lpfc_sli4_mbx_sge_get(mboxq, 0, &sge); + if (unlikely(!mboxq->sge_array)) { + lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, + "2524 Failed to get the non-embedded SGE " + "virtual address\n"); + return NULL; + } + virt_addr = mboxq->sge_array->addr[0]; + + shdr = (union lpfc_sli4_cfg_shdr *)virt_addr; + lpfc_sli_pcimem_bcopy(shdr, shdr, + sizeof(union lpfc_sli4_cfg_shdr)); + shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response); + if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf); + shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response); + if (shdr_status || shdr_add_status) { + if (shdr_status == STATUS_FCF_TABLE_EMPTY || + if_type == LPFC_SLI_INTF_IF_TYPE_2) + lpfc_printf_log(phba, KERN_ERR, + LOG_TRACE_EVENT, + "2726 READ_FCF_RECORD Indicates empty " + "FCF table.\n"); + else + lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, + "2521 READ_FCF_RECORD mailbox failed " + "with status x%x add_status x%x, " + "mbx\n", shdr_status, shdr_add_status); + return NULL; + } + + /* Interpreting the returned information of the FCF record */ + read_fcf = (struct lpfc_mbx_read_fcf_tbl *)virt_addr; + lpfc_sli_pcimem_bcopy(read_fcf, read_fcf, + sizeof(struct lpfc_mbx_read_fcf_tbl)); + *next_fcf_index = bf_get(lpfc_mbx_read_fcf_tbl_nxt_vindx, read_fcf); + new_fcf_record = (struct fcf_record *)(virt_addr + + sizeof(struct lpfc_mbx_read_fcf_tbl)); + lpfc_sli_pcimem_bcopy(new_fcf_record, new_fcf_record, + offsetof(struct fcf_record, vlan_bitmap)); + new_fcf_record->word137 = le32_to_cpu(new_fcf_record->word137); + new_fcf_record->word138 = le32_to_cpu(new_fcf_record->word138); + + return new_fcf_record; +} + +/** + * lpfc_sli4_log_fcf_record_info - Log the information of a fcf record + * @phba: pointer to lpfc hba data structure. + * @fcf_record: pointer to the fcf record. + * @vlan_id: the lowest vlan identifier associated to this fcf record. + * @next_fcf_index: the index to the next fcf record in hba's fcf table. + * + * This routine logs the detailed FCF record if the LOG_FIP loggin is + * enabled. + **/ +static void +lpfc_sli4_log_fcf_record_info(struct lpfc_hba *phba, + struct fcf_record *fcf_record, + uint16_t vlan_id, + uint16_t next_fcf_index) +{ + lpfc_printf_log(phba, KERN_INFO, LOG_FIP, + "2764 READ_FCF_RECORD:\n" + "\tFCF_Index : x%x\n" + "\tFCF_Avail : x%x\n" + "\tFCF_Valid : x%x\n" + "\tFCF_SOL : x%x\n" + "\tFIP_Priority : x%x\n" + "\tMAC_Provider : x%x\n" + "\tLowest VLANID : x%x\n" + "\tFCF_MAC Addr : x%x:%x:%x:%x:%x:%x\n" + "\tFabric_Name : x%x:%x:%x:%x:%x:%x:%x:%x\n" + "\tSwitch_Name : x%x:%x:%x:%x:%x:%x:%x:%x\n" + "\tNext_FCF_Index: x%x\n", + bf_get(lpfc_fcf_record_fcf_index, fcf_record), + bf_get(lpfc_fcf_record_fcf_avail, fcf_record), + bf_get(lpfc_fcf_record_fcf_valid, fcf_record), + bf_get(lpfc_fcf_record_fcf_sol, fcf_record), + fcf_record->fip_priority, + bf_get(lpfc_fcf_record_mac_addr_prov, fcf_record), + vlan_id, + bf_get(lpfc_fcf_record_mac_0, fcf_record), + bf_get(lpfc_fcf_record_mac_1, fcf_record), + bf_get(lpfc_fcf_record_mac_2, fcf_record), + bf_get(lpfc_fcf_record_mac_3, fcf_record), + bf_get(lpfc_fcf_record_mac_4, fcf_record), + bf_get(lpfc_fcf_record_mac_5, fcf_record), + bf_get(lpfc_fcf_record_fab_name_0, fcf_record), + bf_get(lpfc_fcf_record_fab_name_1, fcf_record), + bf_get(lpfc_fcf_record_fab_name_2, fcf_record), + bf_get(lpfc_fcf_record_fab_name_3, fcf_record), + bf_get(lpfc_fcf_record_fab_name_4, fcf_record), + bf_get(lpfc_fcf_record_fab_name_5, fcf_record), + bf_get(lpfc_fcf_record_fab_name_6, fcf_record), + bf_get(lpfc_fcf_record_fab_name_7, fcf_record), + bf_get(lpfc_fcf_record_switch_name_0, fcf_record), + bf_get(lpfc_fcf_record_switch_name_1, fcf_record), + bf_get(lpfc_fcf_record_switch_name_2, fcf_record), + bf_get(lpfc_fcf_record_switch_name_3, fcf_record), + bf_get(lpfc_fcf_record_switch_name_4, fcf_record), + bf_get(lpfc_fcf_record_switch_name_5, fcf_record), + bf_get(lpfc_fcf_record_switch_name_6, fcf_record), + bf_get(lpfc_fcf_record_switch_name_7, fcf_record), + next_fcf_index); +} + +/** + * lpfc_sli4_fcf_record_match - testing new FCF record for matching existing FCF + * @phba: pointer to lpfc hba data structure. + * @fcf_rec: pointer to an existing FCF record. + * @new_fcf_record: pointer to a new FCF record. + * @new_vlan_id: vlan id from the new FCF record. + * + * This function performs matching test of a new FCF record against an existing + * FCF record. If the new_vlan_id passed in is LPFC_FCOE_IGNORE_VID, vlan id + * will not be used as part of the FCF record matching criteria. + * + * Returns true if all the fields matching, otherwise returns false. + */ +static bool +lpfc_sli4_fcf_record_match(struct lpfc_hba *phba, + struct lpfc_fcf_rec *fcf_rec, + struct fcf_record *new_fcf_record, + uint16_t new_vlan_id) +{ + if (new_vlan_id != LPFC_FCOE_IGNORE_VID) + if (!lpfc_vlan_id_match(fcf_rec->vlan_id, new_vlan_id)) + return false; + if (!lpfc_mac_addr_match(fcf_rec->mac_addr, new_fcf_record)) + return false; + if (!lpfc_sw_name_match(fcf_rec->switch_name, new_fcf_record)) + return false; + if (!lpfc_fab_name_match(fcf_rec->fabric_name, new_fcf_record)) + return false; + if (fcf_rec->priority != new_fcf_record->fip_priority) + return false; + return true; +} + +/** + * lpfc_sli4_fcf_rr_next_proc - processing next roundrobin fcf + * @vport: Pointer to vport object. + * @fcf_index: index to next fcf. + * + * This function processing the roundrobin fcf failover to next fcf index. + * When this function is invoked, there will be a current fcf registered + * for flogi. + * Return: 0 for continue retrying flogi on currently registered fcf; + * 1 for stop flogi on currently registered fcf; + */ +int lpfc_sli4_fcf_rr_next_proc(struct lpfc_vport *vport, uint16_t fcf_index) +{ + struct lpfc_hba *phba = vport->phba; + int rc; + + if (fcf_index == LPFC_FCOE_FCF_NEXT_NONE) { + spin_lock_irq(&phba->hbalock); + if (phba->hba_flag & HBA_DEVLOSS_TMO) { + spin_unlock_irq(&phba->hbalock); + lpfc_printf_log(phba, KERN_INFO, LOG_FIP, + "2872 Devloss tmo with no eligible " + "FCF, unregister in-use FCF (x%x) " + "and rescan FCF table\n", + phba->fcf.current_rec.fcf_indx); + lpfc_unregister_fcf_rescan(phba); + goto stop_flogi_current_fcf; + } + /* Mark the end to FLOGI roundrobin failover */ + phba->hba_flag &= ~FCF_RR_INPROG; + /* Allow action to new fcf asynchronous event */ + phba->fcf.fcf_flag &= ~(FCF_AVAILABLE | FCF_SCAN_DONE); + spin_unlock_irq(&phba->hbalock); + lpfc_printf_log(phba, KERN_INFO, LOG_FIP, + "2865 No FCF available, stop roundrobin FCF " + "failover and change port state:x%x/x%x\n", + phba->pport->port_state, LPFC_VPORT_UNKNOWN); + phba->pport->port_state = LPFC_VPORT_UNKNOWN; + + if (!phba->fcf.fcf_redisc_attempted) { + lpfc_unregister_fcf(phba); + + rc = lpfc_sli4_redisc_fcf_table(phba); + if (!rc) { + lpfc_printf_log(phba, KERN_INFO, LOG_FIP, + "3195 Rediscover FCF table\n"); + phba->fcf.fcf_redisc_attempted = 1; + lpfc_sli4_clear_fcf_rr_bmask(phba); + } else { + lpfc_printf_log(phba, KERN_WARNING, LOG_FIP, + "3196 Rediscover FCF table " + "failed. Status:x%x\n", rc); + } + } else { + lpfc_printf_log(phba, KERN_WARNING, LOG_FIP, + "3197 Already rediscover FCF table " + "attempted. No more retry\n"); + } + goto stop_flogi_current_fcf; + } else { + lpfc_printf_log(phba, KERN_INFO, LOG_FIP | LOG_ELS, + "2794 Try FLOGI roundrobin FCF failover to " + "(x%x)\n", fcf_index); + rc = lpfc_sli4_fcf_rr_read_fcf_rec(phba, fcf_index); + if (rc) + lpfc_printf_log(phba, KERN_WARNING, LOG_FIP | LOG_ELS, + "2761 FLOGI roundrobin FCF failover " + "failed (rc:x%x) to read FCF (x%x)\n", + rc, phba->fcf.current_rec.fcf_indx); + else + goto stop_flogi_current_fcf; + } + return 0; + +stop_flogi_current_fcf: + lpfc_can_disctmo(vport); + return 1; +} + +/** + * lpfc_sli4_fcf_pri_list_del + * @phba: pointer to lpfc hba data structure. + * @fcf_index: the index of the fcf record to delete + * This routine checks the on list flag of the fcf_index to be deleted. + * If it is one the list then it is removed from the list, and the flag + * is cleared. This routine grab the hbalock before removing the fcf + * record from the list. + **/ +static void lpfc_sli4_fcf_pri_list_del(struct lpfc_hba *phba, + uint16_t fcf_index) +{ + struct lpfc_fcf_pri *new_fcf_pri; + + new_fcf_pri = &phba->fcf.fcf_pri[fcf_index]; + lpfc_printf_log(phba, KERN_INFO, LOG_FIP, + "3058 deleting idx x%x pri x%x flg x%x\n", + fcf_index, new_fcf_pri->fcf_rec.priority, + new_fcf_pri->fcf_rec.flag); + spin_lock_irq(&phba->hbalock); + if (new_fcf_pri->fcf_rec.flag & LPFC_FCF_ON_PRI_LIST) { + if (phba->fcf.current_rec.priority == + new_fcf_pri->fcf_rec.priority) + phba->fcf.eligible_fcf_cnt--; + list_del_init(&new_fcf_pri->list); + new_fcf_pri->fcf_rec.flag &= ~LPFC_FCF_ON_PRI_LIST; + } + spin_unlock_irq(&phba->hbalock); +} + +/** + * lpfc_sli4_set_fcf_flogi_fail + * @phba: pointer to lpfc hba data structure. + * @fcf_index: the index of the fcf record to update + * This routine acquires the hbalock and then set the LPFC_FCF_FLOGI_FAILED + * flag so the the round robin slection for the particular priority level + * will try a different fcf record that does not have this bit set. + * If the fcf record is re-read for any reason this flag is cleared brfore + * adding it to the priority list. + **/ +void +lpfc_sli4_set_fcf_flogi_fail(struct lpfc_hba *phba, uint16_t fcf_index) +{ + struct lpfc_fcf_pri *new_fcf_pri; + new_fcf_pri = &phba->fcf.fcf_pri[fcf_index]; + spin_lock_irq(&phba->hbalock); + new_fcf_pri->fcf_rec.flag |= LPFC_FCF_FLOGI_FAILED; + spin_unlock_irq(&phba->hbalock); +} + +/** + * lpfc_sli4_fcf_pri_list_add + * @phba: pointer to lpfc hba data structure. + * @fcf_index: the index of the fcf record to add + * @new_fcf_record: pointer to a new FCF record. + * This routine checks the priority of the fcf_index to be added. + * If it is a lower priority than the current head of the fcf_pri list + * then it is added to the list in the right order. + * If it is the same priority as the current head of the list then it + * is added to the head of the list and its bit in the rr_bmask is set. + * If the fcf_index to be added is of a higher priority than the current + * head of the list then the rr_bmask is cleared, its bit is set in the + * rr_bmask and it is added to the head of the list. + * returns: + * 0=success 1=failure + **/ +static int lpfc_sli4_fcf_pri_list_add(struct lpfc_hba *phba, + uint16_t fcf_index, + struct fcf_record *new_fcf_record) +{ + uint16_t current_fcf_pri; + uint16_t last_index; + struct lpfc_fcf_pri *fcf_pri; + struct lpfc_fcf_pri *next_fcf_pri; + struct lpfc_fcf_pri *new_fcf_pri; + int ret; + + new_fcf_pri = &phba->fcf.fcf_pri[fcf_index]; + lpfc_printf_log(phba, KERN_INFO, LOG_FIP, + "3059 adding idx x%x pri x%x flg x%x\n", + fcf_index, new_fcf_record->fip_priority, + new_fcf_pri->fcf_rec.flag); + spin_lock_irq(&phba->hbalock); + if (new_fcf_pri->fcf_rec.flag & LPFC_FCF_ON_PRI_LIST) + list_del_init(&new_fcf_pri->list); + new_fcf_pri->fcf_rec.fcf_index = fcf_index; + new_fcf_pri->fcf_rec.priority = new_fcf_record->fip_priority; + if (list_empty(&phba->fcf.fcf_pri_list)) { + list_add(&new_fcf_pri->list, &phba->fcf.fcf_pri_list); + ret = lpfc_sli4_fcf_rr_index_set(phba, + new_fcf_pri->fcf_rec.fcf_index); + goto out; + } + + last_index = find_first_bit(phba->fcf.fcf_rr_bmask, + LPFC_SLI4_FCF_TBL_INDX_MAX); + if (last_index >= LPFC_SLI4_FCF_TBL_INDX_MAX) { + ret = 0; /* Empty rr list */ + goto out; + } + current_fcf_pri = phba->fcf.fcf_pri[last_index].fcf_rec.priority; + if (new_fcf_pri->fcf_rec.priority <= current_fcf_pri) { + list_add(&new_fcf_pri->list, &phba->fcf.fcf_pri_list); + if (new_fcf_pri->fcf_rec.priority < current_fcf_pri) { + memset(phba->fcf.fcf_rr_bmask, 0, + sizeof(*phba->fcf.fcf_rr_bmask)); + /* fcfs_at_this_priority_level = 1; */ + phba->fcf.eligible_fcf_cnt = 1; + } else + /* fcfs_at_this_priority_level++; */ + phba->fcf.eligible_fcf_cnt++; + ret = lpfc_sli4_fcf_rr_index_set(phba, + new_fcf_pri->fcf_rec.fcf_index); + goto out; + } + + list_for_each_entry_safe(fcf_pri, next_fcf_pri, + &phba->fcf.fcf_pri_list, list) { + if (new_fcf_pri->fcf_rec.priority <= + fcf_pri->fcf_rec.priority) { + if (fcf_pri->list.prev == &phba->fcf.fcf_pri_list) + list_add(&new_fcf_pri->list, + &phba->fcf.fcf_pri_list); + else + list_add(&new_fcf_pri->list, + &((struct lpfc_fcf_pri *) + fcf_pri->list.prev)->list); + ret = 0; + goto out; + } else if (fcf_pri->list.next == &phba->fcf.fcf_pri_list + || new_fcf_pri->fcf_rec.priority < + next_fcf_pri->fcf_rec.priority) { + list_add(&new_fcf_pri->list, &fcf_pri->list); + ret = 0; + goto out; + } + if (new_fcf_pri->fcf_rec.priority > fcf_pri->fcf_rec.priority) + continue; + + } + ret = 1; +out: + /* we use = instead of |= to clear the FLOGI_FAILED flag. */ + new_fcf_pri->fcf_rec.flag = LPFC_FCF_ON_PRI_LIST; + spin_unlock_irq(&phba->hbalock); + return ret; +} + +/** + * lpfc_mbx_cmpl_fcf_scan_read_fcf_rec - fcf scan read_fcf mbox cmpl handler. + * @phba: pointer to lpfc hba data structure. + * @mboxq: pointer to mailbox object. + * + * This function iterates through all the fcf records available in + * HBA and chooses the optimal FCF record for discovery. After finding + * the FCF for discovery it registers the FCF record and kicks start + * discovery. + * If FCF_IN_USE flag is set in currently used FCF, the routine tries to + * use an FCF record which matches fabric name and mac address of the + * currently used FCF record. + * If the driver supports only one FCF, it will try to use the FCF record + * used by BOOT_BIOS. + */ +void +lpfc_mbx_cmpl_fcf_scan_read_fcf_rec(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) +{ + struct fcf_record *new_fcf_record; + uint32_t boot_flag, addr_mode; + uint16_t fcf_index, next_fcf_index; + struct lpfc_fcf_rec *fcf_rec = NULL; + uint16_t vlan_id = LPFC_FCOE_NULL_VID; + bool select_new_fcf; + int rc; + + /* If there is pending FCoE event restart FCF table scan */ + if (lpfc_check_pending_fcoe_event(phba, LPFC_SKIP_UNREG_FCF)) { + lpfc_sli4_mbox_cmd_free(phba, mboxq); + return; + } + + /* Parse the FCF record from the non-embedded mailbox command */ + new_fcf_record = lpfc_sli4_fcf_rec_mbox_parse(phba, mboxq, + &next_fcf_index); + if (!new_fcf_record) { + lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, + "2765 Mailbox command READ_FCF_RECORD " + "failed to retrieve a FCF record.\n"); + /* Let next new FCF event trigger fast failover */ + spin_lock_irq(&phba->hbalock); + phba->hba_flag &= ~FCF_TS_INPROG; + spin_unlock_irq(&phba->hbalock); + lpfc_sli4_mbox_cmd_free(phba, mboxq); + return; + } + + /* Check the FCF record against the connection list */ + rc = lpfc_match_fcf_conn_list(phba, new_fcf_record, &boot_flag, + &addr_mode, &vlan_id); + + /* Log the FCF record information if turned on */ + lpfc_sli4_log_fcf_record_info(phba, new_fcf_record, vlan_id, + next_fcf_index); + + /* + * If the fcf record does not match with connect list entries + * read the next entry; otherwise, this is an eligible FCF + * record for roundrobin FCF failover. + */ + if (!rc) { + lpfc_sli4_fcf_pri_list_del(phba, + bf_get(lpfc_fcf_record_fcf_index, + new_fcf_record)); + lpfc_printf_log(phba, KERN_WARNING, LOG_FIP, + "2781 FCF (x%x) failed connection " + "list check: (x%x/x%x/%x)\n", + bf_get(lpfc_fcf_record_fcf_index, + new_fcf_record), + bf_get(lpfc_fcf_record_fcf_avail, + new_fcf_record), + bf_get(lpfc_fcf_record_fcf_valid, + new_fcf_record), + bf_get(lpfc_fcf_record_fcf_sol, + new_fcf_record)); + if ((phba->fcf.fcf_flag & FCF_IN_USE) && + lpfc_sli4_fcf_record_match(phba, &phba->fcf.current_rec, + new_fcf_record, LPFC_FCOE_IGNORE_VID)) { + if (bf_get(lpfc_fcf_record_fcf_index, new_fcf_record) != + phba->fcf.current_rec.fcf_indx) { + lpfc_printf_log(phba, KERN_ERR, + LOG_TRACE_EVENT, + "2862 FCF (x%x) matches property " + "of in-use FCF (x%x)\n", + bf_get(lpfc_fcf_record_fcf_index, + new_fcf_record), + phba->fcf.current_rec.fcf_indx); + goto read_next_fcf; + } + /* + * In case the current in-use FCF record becomes + * invalid/unavailable during FCF discovery that + * was not triggered by fast FCF failover process, + * treat it as fast FCF failover. + */ + if (!(phba->fcf.fcf_flag & FCF_REDISC_PEND) && + !(phba->fcf.fcf_flag & FCF_REDISC_FOV)) { + lpfc_printf_log(phba, KERN_WARNING, LOG_FIP, + "2835 Invalid in-use FCF " + "(x%x), enter FCF failover " + "table scan.\n", + phba->fcf.current_rec.fcf_indx); + spin_lock_irq(&phba->hbalock); + phba->fcf.fcf_flag |= FCF_REDISC_FOV; + spin_unlock_irq(&phba->hbalock); + lpfc_sli4_mbox_cmd_free(phba, mboxq); + lpfc_sli4_fcf_scan_read_fcf_rec(phba, + LPFC_FCOE_FCF_GET_FIRST); + return; + } + } + goto read_next_fcf; + } else { + fcf_index = bf_get(lpfc_fcf_record_fcf_index, new_fcf_record); + rc = lpfc_sli4_fcf_pri_list_add(phba, fcf_index, + new_fcf_record); + if (rc) + goto read_next_fcf; + } + + /* + * If this is not the first FCF discovery of the HBA, use last + * FCF record for the discovery. The condition that a rescan + * matches the in-use FCF record: fabric name, switch name, mac + * address, and vlan_id. + */ + spin_lock_irq(&phba->hbalock); + if (phba->fcf.fcf_flag & FCF_IN_USE) { + if (phba->cfg_fcf_failover_policy == LPFC_FCF_FOV && + lpfc_sli4_fcf_record_match(phba, &phba->fcf.current_rec, + new_fcf_record, vlan_id)) { + if (bf_get(lpfc_fcf_record_fcf_index, new_fcf_record) == + phba->fcf.current_rec.fcf_indx) { + phba->fcf.fcf_flag |= FCF_AVAILABLE; + if (phba->fcf.fcf_flag & FCF_REDISC_PEND) + /* Stop FCF redisc wait timer */ + __lpfc_sli4_stop_fcf_redisc_wait_timer( + phba); + else if (phba->fcf.fcf_flag & FCF_REDISC_FOV) + /* Fast failover, mark completed */ + phba->fcf.fcf_flag &= ~FCF_REDISC_FOV; + spin_unlock_irq(&phba->hbalock); + lpfc_printf_log(phba, KERN_INFO, LOG_FIP, + "2836 New FCF matches in-use " + "FCF (x%x), port_state:x%x, " + "fc_flag:x%x\n", + phba->fcf.current_rec.fcf_indx, + phba->pport->port_state, + phba->pport->fc_flag); + goto out; + } else + lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, + "2863 New FCF (x%x) matches " + "property of in-use FCF (x%x)\n", + bf_get(lpfc_fcf_record_fcf_index, + new_fcf_record), + phba->fcf.current_rec.fcf_indx); + } + /* + * Read next FCF record from HBA searching for the matching + * with in-use record only if not during the fast failover + * period. In case of fast failover period, it shall try to + * determine whether the FCF record just read should be the + * next candidate. + */ + if (!(phba->fcf.fcf_flag & FCF_REDISC_FOV)) { + spin_unlock_irq(&phba->hbalock); + goto read_next_fcf; + } + } + /* + * Update on failover FCF record only if it's in FCF fast-failover + * period; otherwise, update on current FCF record. + */ + if (phba->fcf.fcf_flag & FCF_REDISC_FOV) + fcf_rec = &phba->fcf.failover_rec; + else + fcf_rec = &phba->fcf.current_rec; + + if (phba->fcf.fcf_flag & FCF_AVAILABLE) { + /* + * If the driver FCF record does not have boot flag + * set and new hba fcf record has boot flag set, use + * the new hba fcf record. + */ + if (boot_flag && !(fcf_rec->flag & BOOT_ENABLE)) { + /* Choose this FCF record */ + lpfc_printf_log(phba, KERN_INFO, LOG_FIP, + "2837 Update current FCF record " + "(x%x) with new FCF record (x%x)\n", + fcf_rec->fcf_indx, + bf_get(lpfc_fcf_record_fcf_index, + new_fcf_record)); + __lpfc_update_fcf_record(phba, fcf_rec, new_fcf_record, + addr_mode, vlan_id, BOOT_ENABLE); + spin_unlock_irq(&phba->hbalock); + goto read_next_fcf; + } + /* + * If the driver FCF record has boot flag set and the + * new hba FCF record does not have boot flag, read + * the next FCF record. + */ + if (!boot_flag && (fcf_rec->flag & BOOT_ENABLE)) { + spin_unlock_irq(&phba->hbalock); + goto read_next_fcf; + } + /* + * If the new hba FCF record has lower priority value + * than the driver FCF record, use the new record. + */ + if (new_fcf_record->fip_priority < fcf_rec->priority) { + /* Choose the new FCF record with lower priority */ + lpfc_printf_log(phba, KERN_INFO, LOG_FIP, + "2838 Update current FCF record " + "(x%x) with new FCF record (x%x)\n", + fcf_rec->fcf_indx, + bf_get(lpfc_fcf_record_fcf_index, + new_fcf_record)); + __lpfc_update_fcf_record(phba, fcf_rec, new_fcf_record, + addr_mode, vlan_id, 0); + /* Reset running random FCF selection count */ + phba->fcf.eligible_fcf_cnt = 1; + } else if (new_fcf_record->fip_priority == fcf_rec->priority) { + /* Update running random FCF selection count */ + phba->fcf.eligible_fcf_cnt++; + select_new_fcf = lpfc_sli4_new_fcf_random_select(phba, + phba->fcf.eligible_fcf_cnt); + if (select_new_fcf) { + lpfc_printf_log(phba, KERN_INFO, LOG_FIP, + "2839 Update current FCF record " + "(x%x) with new FCF record (x%x)\n", + fcf_rec->fcf_indx, + bf_get(lpfc_fcf_record_fcf_index, + new_fcf_record)); + /* Choose the new FCF by random selection */ + __lpfc_update_fcf_record(phba, fcf_rec, + new_fcf_record, + addr_mode, vlan_id, 0); + } + } + spin_unlock_irq(&phba->hbalock); + goto read_next_fcf; + } + /* + * This is the first suitable FCF record, choose this record for + * initial best-fit FCF. + */ + if (fcf_rec) { + lpfc_printf_log(phba, KERN_INFO, LOG_FIP, + "2840 Update initial FCF candidate " + "with FCF (x%x)\n", + bf_get(lpfc_fcf_record_fcf_index, + new_fcf_record)); + __lpfc_update_fcf_record(phba, fcf_rec, new_fcf_record, + addr_mode, vlan_id, (boot_flag ? + BOOT_ENABLE : 0)); + phba->fcf.fcf_flag |= FCF_AVAILABLE; + /* Setup initial running random FCF selection count */ + phba->fcf.eligible_fcf_cnt = 1; + } + spin_unlock_irq(&phba->hbalock); + goto read_next_fcf; + +read_next_fcf: + lpfc_sli4_mbox_cmd_free(phba, mboxq); + if (next_fcf_index == LPFC_FCOE_FCF_NEXT_NONE || next_fcf_index == 0) { + if (phba->fcf.fcf_flag & FCF_REDISC_FOV) { + /* + * Case of FCF fast failover scan + */ + + /* + * It has not found any suitable FCF record, cancel + * FCF scan inprogress, and do nothing + */ + if (!(phba->fcf.failover_rec.flag & RECORD_VALID)) { + lpfc_printf_log(phba, KERN_WARNING, LOG_FIP, + "2782 No suitable FCF found: " + "(x%x/x%x)\n", + phba->fcoe_eventtag_at_fcf_scan, + bf_get(lpfc_fcf_record_fcf_index, + new_fcf_record)); + spin_lock_irq(&phba->hbalock); + if (phba->hba_flag & HBA_DEVLOSS_TMO) { + phba->hba_flag &= ~FCF_TS_INPROG; + spin_unlock_irq(&phba->hbalock); + /* Unregister in-use FCF and rescan */ + lpfc_printf_log(phba, KERN_INFO, + LOG_FIP, + "2864 On devloss tmo " + "unreg in-use FCF and " + "rescan FCF table\n"); + lpfc_unregister_fcf_rescan(phba); + return; + } + /* + * Let next new FCF event trigger fast failover + */ + phba->hba_flag &= ~FCF_TS_INPROG; + spin_unlock_irq(&phba->hbalock); + return; + } + /* + * It has found a suitable FCF record that is not + * the same as in-use FCF record, unregister the + * in-use FCF record, replace the in-use FCF record + * with the new FCF record, mark FCF fast failover + * completed, and then start register the new FCF + * record. + */ + + /* Unregister the current in-use FCF record */ + lpfc_unregister_fcf(phba); + + /* Replace in-use record with the new record */ + lpfc_printf_log(phba, KERN_INFO, LOG_FIP, + "2842 Replace in-use FCF (x%x) " + "with failover FCF (x%x)\n", + phba->fcf.current_rec.fcf_indx, + phba->fcf.failover_rec.fcf_indx); + memcpy(&phba->fcf.current_rec, + &phba->fcf.failover_rec, + sizeof(struct lpfc_fcf_rec)); + /* + * Mark the fast FCF failover rediscovery completed + * and the start of the first round of the roundrobin + * FCF failover. + */ + spin_lock_irq(&phba->hbalock); + phba->fcf.fcf_flag &= ~FCF_REDISC_FOV; + spin_unlock_irq(&phba->hbalock); + /* Register to the new FCF record */ + lpfc_register_fcf(phba); + } else { + /* + * In case of transaction period to fast FCF failover, + * do nothing when search to the end of the FCF table. + */ + if ((phba->fcf.fcf_flag & FCF_REDISC_EVT) || + (phba->fcf.fcf_flag & FCF_REDISC_PEND)) + return; + + if (phba->cfg_fcf_failover_policy == LPFC_FCF_FOV && + phba->fcf.fcf_flag & FCF_IN_USE) { + /* + * In case the current in-use FCF record no + * longer existed during FCF discovery that + * was not triggered by fast FCF failover + * process, treat it as fast FCF failover. + */ + lpfc_printf_log(phba, KERN_INFO, LOG_FIP, + "2841 In-use FCF record (x%x) " + "not reported, entering fast " + "FCF failover mode scanning.\n", + phba->fcf.current_rec.fcf_indx); + spin_lock_irq(&phba->hbalock); + phba->fcf.fcf_flag |= FCF_REDISC_FOV; + spin_unlock_irq(&phba->hbalock); + lpfc_sli4_fcf_scan_read_fcf_rec(phba, + LPFC_FCOE_FCF_GET_FIRST); + return; + } + /* Register to the new FCF record */ + lpfc_register_fcf(phba); + } + } else + lpfc_sli4_fcf_scan_read_fcf_rec(phba, next_fcf_index); + return; + +out: + lpfc_sli4_mbox_cmd_free(phba, mboxq); + lpfc_register_fcf(phba); + + return; +} + +/** + * lpfc_mbx_cmpl_fcf_rr_read_fcf_rec - fcf roundrobin read_fcf mbox cmpl hdler + * @phba: pointer to lpfc hba data structure. + * @mboxq: pointer to mailbox object. + * + * This is the callback function for FLOGI failure roundrobin FCF failover + * read FCF record mailbox command from the eligible FCF record bmask for + * performing the failover. If the FCF read back is not valid/available, it + * fails through to retrying FLOGI to the currently registered FCF again. + * Otherwise, if the FCF read back is valid and available, it will set the + * newly read FCF record to the failover FCF record, unregister currently + * registered FCF record, copy the failover FCF record to the current + * FCF record, and then register the current FCF record before proceeding + * to trying FLOGI on the new failover FCF. + */ +void +lpfc_mbx_cmpl_fcf_rr_read_fcf_rec(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) +{ + struct fcf_record *new_fcf_record; + uint32_t boot_flag, addr_mode; + uint16_t next_fcf_index, fcf_index; + uint16_t current_fcf_index; + uint16_t vlan_id = LPFC_FCOE_NULL_VID; + int rc; + + /* If link state is not up, stop the roundrobin failover process */ + if (phba->link_state < LPFC_LINK_UP) { + spin_lock_irq(&phba->hbalock); + phba->fcf.fcf_flag &= ~FCF_DISCOVERY; + phba->hba_flag &= ~FCF_RR_INPROG; + spin_unlock_irq(&phba->hbalock); + goto out; + } + + /* Parse the FCF record from the non-embedded mailbox command */ + new_fcf_record = lpfc_sli4_fcf_rec_mbox_parse(phba, mboxq, + &next_fcf_index); + if (!new_fcf_record) { + lpfc_printf_log(phba, KERN_WARNING, LOG_FIP, + "2766 Mailbox command READ_FCF_RECORD " + "failed to retrieve a FCF record. " + "hba_flg x%x fcf_flg x%x\n", phba->hba_flag, + phba->fcf.fcf_flag); + lpfc_unregister_fcf_rescan(phba); + goto out; + } + + /* Get the needed parameters from FCF record */ + rc = lpfc_match_fcf_conn_list(phba, new_fcf_record, &boot_flag, + &addr_mode, &vlan_id); + + /* Log the FCF record information if turned on */ + lpfc_sli4_log_fcf_record_info(phba, new_fcf_record, vlan_id, + next_fcf_index); + + fcf_index = bf_get(lpfc_fcf_record_fcf_index, new_fcf_record); + if (!rc) { + lpfc_printf_log(phba, KERN_INFO, LOG_FIP, + "2848 Remove ineligible FCF (x%x) from " + "from roundrobin bmask\n", fcf_index); + /* Clear roundrobin bmask bit for ineligible FCF */ + lpfc_sli4_fcf_rr_index_clear(phba, fcf_index); + /* Perform next round of roundrobin FCF failover */ + fcf_index = lpfc_sli4_fcf_rr_next_index_get(phba); + rc = lpfc_sli4_fcf_rr_next_proc(phba->pport, fcf_index); + if (rc) + goto out; + goto error_out; + } + + if (fcf_index == phba->fcf.current_rec.fcf_indx) { + lpfc_printf_log(phba, KERN_INFO, LOG_FIP, + "2760 Perform FLOGI roundrobin FCF failover: " + "FCF (x%x) back to FCF (x%x)\n", + phba->fcf.current_rec.fcf_indx, fcf_index); + /* Wait 500 ms before retrying FLOGI to current FCF */ + msleep(500); + lpfc_issue_init_vfi(phba->pport); + goto out; + } + + /* Upload new FCF record to the failover FCF record */ + lpfc_printf_log(phba, KERN_INFO, LOG_FIP, + "2834 Update current FCF (x%x) with new FCF (x%x)\n", + phba->fcf.failover_rec.fcf_indx, fcf_index); + spin_lock_irq(&phba->hbalock); + __lpfc_update_fcf_record(phba, &phba->fcf.failover_rec, + new_fcf_record, addr_mode, vlan_id, + (boot_flag ? BOOT_ENABLE : 0)); + spin_unlock_irq(&phba->hbalock); + + current_fcf_index = phba->fcf.current_rec.fcf_indx; + + /* Unregister the current in-use FCF record */ + lpfc_unregister_fcf(phba); + + /* Replace in-use record with the new record */ + memcpy(&phba->fcf.current_rec, &phba->fcf.failover_rec, + sizeof(struct lpfc_fcf_rec)); + + lpfc_printf_log(phba, KERN_INFO, LOG_FIP, + "2783 Perform FLOGI roundrobin FCF failover: FCF " + "(x%x) to FCF (x%x)\n", current_fcf_index, fcf_index); + +error_out: + lpfc_register_fcf(phba); +out: + lpfc_sli4_mbox_cmd_free(phba, mboxq); +} + +/** + * lpfc_mbx_cmpl_read_fcf_rec - read fcf completion handler. + * @phba: pointer to lpfc hba data structure. + * @mboxq: pointer to mailbox object. + * + * This is the callback function of read FCF record mailbox command for + * updating the eligible FCF bmask for FLOGI failure roundrobin FCF + * failover when a new FCF event happened. If the FCF read back is + * valid/available and it passes the connection list check, it updates + * the bmask for the eligible FCF record for roundrobin failover. + */ +void +lpfc_mbx_cmpl_read_fcf_rec(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) +{ + struct fcf_record *new_fcf_record; + uint32_t boot_flag, addr_mode; + uint16_t fcf_index, next_fcf_index; + uint16_t vlan_id = LPFC_FCOE_NULL_VID; + int rc; + + /* If link state is not up, no need to proceed */ + if (phba->link_state < LPFC_LINK_UP) + goto out; + + /* If FCF discovery period is over, no need to proceed */ + if (!(phba->fcf.fcf_flag & FCF_DISCOVERY)) + goto out; + + /* Parse the FCF record from the non-embedded mailbox command */ + new_fcf_record = lpfc_sli4_fcf_rec_mbox_parse(phba, mboxq, + &next_fcf_index); + if (!new_fcf_record) { + lpfc_printf_log(phba, KERN_INFO, LOG_FIP, + "2767 Mailbox command READ_FCF_RECORD " + "failed to retrieve a FCF record.\n"); + goto out; + } + + /* Check the connection list for eligibility */ + rc = lpfc_match_fcf_conn_list(phba, new_fcf_record, &boot_flag, + &addr_mode, &vlan_id); + + /* Log the FCF record information if turned on */ + lpfc_sli4_log_fcf_record_info(phba, new_fcf_record, vlan_id, + next_fcf_index); + + if (!rc) + goto out; + + /* Update the eligible FCF record index bmask */ + fcf_index = bf_get(lpfc_fcf_record_fcf_index, new_fcf_record); + + rc = lpfc_sli4_fcf_pri_list_add(phba, fcf_index, new_fcf_record); + +out: + lpfc_sli4_mbox_cmd_free(phba, mboxq); +} + +/** + * lpfc_init_vfi_cmpl - Completion handler for init_vfi mbox command. + * @phba: pointer to lpfc hba data structure. + * @mboxq: pointer to mailbox data structure. + * + * This function handles completion of init vfi mailbox command. + */ +static void +lpfc_init_vfi_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) +{ + struct lpfc_vport *vport = mboxq->vport; + + /* + * VFI not supported on interface type 0, just do the flogi + * Also continue if the VFI is in use - just use the same one. + */ + if (mboxq->u.mb.mbxStatus && + (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) != + LPFC_SLI_INTF_IF_TYPE_0) && + mboxq->u.mb.mbxStatus != MBX_VFI_IN_USE) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, + "2891 Init VFI mailbox failed 0x%x\n", + mboxq->u.mb.mbxStatus); + mempool_free(mboxq, phba->mbox_mem_pool); + lpfc_vport_set_state(vport, FC_VPORT_FAILED); + return; + } + + lpfc_initial_flogi(vport); + mempool_free(mboxq, phba->mbox_mem_pool); + return; +} + +/** + * lpfc_issue_init_vfi - Issue init_vfi mailbox command. + * @vport: pointer to lpfc_vport data structure. + * + * This function issue a init_vfi mailbox command to initialize the VFI and + * VPI for the physical port. + */ +void +lpfc_issue_init_vfi(struct lpfc_vport *vport) +{ + LPFC_MBOXQ_t *mboxq; + int rc; + struct lpfc_hba *phba = vport->phba; + + mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + if (!mboxq) { + lpfc_printf_vlog(vport, KERN_ERR, + LOG_TRACE_EVENT, "2892 Failed to allocate " + "init_vfi mailbox\n"); + return; + } + lpfc_init_vfi(mboxq, vport); + mboxq->mbox_cmpl = lpfc_init_vfi_cmpl; + rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT); + if (rc == MBX_NOT_FINISHED) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, + "2893 Failed to issue init_vfi mailbox\n"); + mempool_free(mboxq, vport->phba->mbox_mem_pool); + } +} + +/** + * lpfc_init_vpi_cmpl - Completion handler for init_vpi mbox command. + * @phba: pointer to lpfc hba data structure. + * @mboxq: pointer to mailbox data structure. + * + * This function handles completion of init vpi mailbox command. + */ +void +lpfc_init_vpi_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) +{ + struct lpfc_vport *vport = mboxq->vport; + struct lpfc_nodelist *ndlp; + struct Scsi_Host *shost = lpfc_shost_from_vport(vport); + + if (mboxq->u.mb.mbxStatus) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, + "2609 Init VPI mailbox failed 0x%x\n", + mboxq->u.mb.mbxStatus); + mempool_free(mboxq, phba->mbox_mem_pool); + lpfc_vport_set_state(vport, FC_VPORT_FAILED); + return; + } + spin_lock_irq(shost->host_lock); + vport->fc_flag &= ~FC_VPORT_NEEDS_INIT_VPI; + spin_unlock_irq(shost->host_lock); + + /* If this port is physical port or FDISC is done, do reg_vpi */ + if ((phba->pport == vport) || (vport->port_state == LPFC_FDISC)) { + ndlp = lpfc_findnode_did(vport, Fabric_DID); + if (!ndlp) + lpfc_printf_vlog(vport, KERN_ERR, + LOG_TRACE_EVENT, + "2731 Cannot find fabric " + "controller node\n"); + else + lpfc_register_new_vport(phba, vport, ndlp); + mempool_free(mboxq, phba->mbox_mem_pool); + return; + } + + if (phba->link_flag & LS_NPIV_FAB_SUPPORTED) + lpfc_initial_fdisc(vport); + else { + lpfc_vport_set_state(vport, FC_VPORT_NO_FABRIC_SUPP); + lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, + "2606 No NPIV Fabric support\n"); + } + mempool_free(mboxq, phba->mbox_mem_pool); + return; +} + +/** + * lpfc_issue_init_vpi - Issue init_vpi mailbox command. + * @vport: pointer to lpfc_vport data structure. + * + * This function issue a init_vpi mailbox command to initialize + * VPI for the vport. + */ +void +lpfc_issue_init_vpi(struct lpfc_vport *vport) +{ + LPFC_MBOXQ_t *mboxq; + int rc, vpi; + + if ((vport->port_type != LPFC_PHYSICAL_PORT) && (!vport->vpi)) { + vpi = lpfc_alloc_vpi(vport->phba); + if (!vpi) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, + "3303 Failed to obtain vport vpi\n"); + lpfc_vport_set_state(vport, FC_VPORT_FAILED); + return; + } + vport->vpi = vpi; + } + + mboxq = mempool_alloc(vport->phba->mbox_mem_pool, GFP_KERNEL); + if (!mboxq) { + lpfc_printf_vlog(vport, KERN_ERR, + LOG_TRACE_EVENT, "2607 Failed to allocate " + "init_vpi mailbox\n"); + return; + } + lpfc_init_vpi(vport->phba, mboxq, vport->vpi); + mboxq->vport = vport; + mboxq->mbox_cmpl = lpfc_init_vpi_cmpl; + rc = lpfc_sli_issue_mbox(vport->phba, mboxq, MBX_NOWAIT); + if (rc == MBX_NOT_FINISHED) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, + "2608 Failed to issue init_vpi mailbox\n"); + mempool_free(mboxq, vport->phba->mbox_mem_pool); + } +} + +/** + * lpfc_start_fdiscs - send fdiscs for each vports on this port. + * @phba: pointer to lpfc hba data structure. + * + * This function loops through the list of vports on the @phba and issues an + * FDISC if possible. + */ +void +lpfc_start_fdiscs(struct lpfc_hba *phba) +{ + struct lpfc_vport **vports; + int i; + + vports = lpfc_create_vport_work_array(phba); + if (vports != NULL) { + for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) { + if (vports[i]->port_type == LPFC_PHYSICAL_PORT) + continue; + /* There are no vpi for this vport */ + if (vports[i]->vpi > phba->max_vpi) { + lpfc_vport_set_state(vports[i], + FC_VPORT_FAILED); + continue; + } + if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) { + lpfc_vport_set_state(vports[i], + FC_VPORT_LINKDOWN); + continue; + } + if (vports[i]->fc_flag & FC_VPORT_NEEDS_INIT_VPI) { + lpfc_issue_init_vpi(vports[i]); + continue; + } + if (phba->link_flag & LS_NPIV_FAB_SUPPORTED) + lpfc_initial_fdisc(vports[i]); + else { + lpfc_vport_set_state(vports[i], + FC_VPORT_NO_FABRIC_SUPP); + lpfc_printf_vlog(vports[i], KERN_ERR, + LOG_TRACE_EVENT, + "0259 No NPIV " + "Fabric support\n"); + } + } + } + lpfc_destroy_vport_work_array(phba, vports); +} + +void +lpfc_mbx_cmpl_reg_vfi(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) +{ + struct lpfc_vport *vport = mboxq->vport; + struct Scsi_Host *shost = lpfc_shost_from_vport(vport); + + /* + * VFI not supported for interface type 0, so ignore any mailbox + * error (except VFI in use) and continue with the discovery. + */ + if (mboxq->u.mb.mbxStatus && + (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) != + LPFC_SLI_INTF_IF_TYPE_0) && + mboxq->u.mb.mbxStatus != MBX_VFI_IN_USE) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, + "2018 REG_VFI mbxStatus error x%x " + "HBA state x%x\n", + mboxq->u.mb.mbxStatus, vport->port_state); + if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) { + /* FLOGI failed, use loop map to make discovery list */ + lpfc_disc_list_loopmap(vport); + /* Start discovery */ + lpfc_disc_start(vport); + goto out_free_mem; + } + lpfc_vport_set_state(vport, FC_VPORT_FAILED); + goto out_free_mem; + } + + /* If the VFI is already registered, there is nothing else to do + * Unless this was a VFI update and we are in PT2PT mode, then + * we should drop through to set the port state to ready. + */ + if (vport->fc_flag & FC_VFI_REGISTERED) + if (!(phba->sli_rev == LPFC_SLI_REV4 && + vport->fc_flag & FC_PT2PT)) + goto out_free_mem; + + /* The VPI is implicitly registered when the VFI is registered */ + spin_lock_irq(shost->host_lock); + vport->vpi_state |= LPFC_VPI_REGISTERED; + vport->fc_flag |= FC_VFI_REGISTERED; + vport->fc_flag &= ~FC_VPORT_NEEDS_REG_VPI; + vport->fc_flag &= ~FC_VPORT_NEEDS_INIT_VPI; + spin_unlock_irq(shost->host_lock); + + /* In case SLI4 FC loopback test, we are ready */ + if ((phba->sli_rev == LPFC_SLI_REV4) && + (phba->link_flag & LS_LOOPBACK_MODE)) { + phba->link_state = LPFC_HBA_READY; + goto out_free_mem; + } + + lpfc_printf_vlog(vport, KERN_INFO, LOG_SLI, + "3313 cmpl reg vfi port_state:%x fc_flag:%x myDid:%x " + "alpacnt:%d LinkState:%x topology:%x\n", + vport->port_state, vport->fc_flag, vport->fc_myDID, + vport->phba->alpa_map[0], + phba->link_state, phba->fc_topology); + + if (vport->port_state == LPFC_FABRIC_CFG_LINK) { + /* + * For private loop or for NPort pt2pt, + * just start discovery and we are done. + */ + if ((vport->fc_flag & FC_PT2PT) || + ((phba->fc_topology == LPFC_TOPOLOGY_LOOP) && + !(vport->fc_flag & FC_PUBLIC_LOOP))) { + + /* Use loop map to make discovery list */ + lpfc_disc_list_loopmap(vport); + /* Start discovery */ + if (vport->fc_flag & FC_PT2PT) + vport->port_state = LPFC_VPORT_READY; + else + lpfc_disc_start(vport); + } else { + lpfc_start_fdiscs(phba); + lpfc_do_scr_ns_plogi(phba, vport); + } + } + +out_free_mem: + lpfc_mbox_rsrc_cleanup(phba, mboxq, MBOX_THD_UNLOCKED); +} + +static void +lpfc_mbx_cmpl_read_sparam(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) +{ + MAILBOX_t *mb = &pmb->u.mb; + struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *)pmb->ctx_buf; + struct lpfc_vport *vport = pmb->vport; + struct Scsi_Host *shost = lpfc_shost_from_vport(vport); + struct serv_parm *sp = &vport->fc_sparam; + uint32_t ed_tov; + + /* Check for error */ + if (mb->mbxStatus) { + /* READ_SPARAM mbox error <mbxStatus> state <hba_state> */ + lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, + "0319 READ_SPARAM mbxStatus error x%x " + "hba state x%x>\n", + mb->mbxStatus, vport->port_state); + lpfc_linkdown(phba); + goto out; + } + + memcpy((uint8_t *) &vport->fc_sparam, (uint8_t *) mp->virt, + sizeof (struct serv_parm)); + + ed_tov = be32_to_cpu(sp->cmn.e_d_tov); + if (sp->cmn.edtovResolution) /* E_D_TOV ticks are in nanoseconds */ + ed_tov = (ed_tov + 999999) / 1000000; + + phba->fc_edtov = ed_tov; + phba->fc_ratov = (2 * ed_tov) / 1000; + if (phba->fc_ratov < FF_DEF_RATOV) { + /* RA_TOV should be atleast 10sec for initial flogi */ + phba->fc_ratov = FF_DEF_RATOV; + } + + lpfc_update_vport_wwn(vport); + fc_host_port_name(shost) = wwn_to_u64(vport->fc_portname.u.wwn); + if (vport->port_type == LPFC_PHYSICAL_PORT) { + memcpy(&phba->wwnn, &vport->fc_nodename, sizeof(phba->wwnn)); + memcpy(&phba->wwpn, &vport->fc_portname, sizeof(phba->wwnn)); + } + + lpfc_mbox_rsrc_cleanup(phba, pmb, MBOX_THD_UNLOCKED); + + /* Check if sending the FLOGI is being deferred to after we get + * up to date CSPs from MBX_READ_SPARAM. + */ + if (phba->hba_flag & HBA_DEFER_FLOGI) { + lpfc_initial_flogi(vport); + phba->hba_flag &= ~HBA_DEFER_FLOGI; + } + return; + +out: + lpfc_mbox_rsrc_cleanup(phba, pmb, MBOX_THD_UNLOCKED); + lpfc_issue_clear_la(phba, vport); +} + +static void +lpfc_mbx_process_link_up(struct lpfc_hba *phba, struct lpfc_mbx_read_top *la) +{ + struct lpfc_vport *vport = phba->pport; + LPFC_MBOXQ_t *sparam_mbox, *cfglink_mbox = NULL; + struct Scsi_Host *shost; + int i; + int rc; + struct fcf_record *fcf_record; + uint32_t fc_flags = 0; + unsigned long iflags; + + spin_lock_irqsave(&phba->hbalock, iflags); + phba->fc_linkspeed = bf_get(lpfc_mbx_read_top_link_spd, la); + + if (!(phba->hba_flag & HBA_FCOE_MODE)) { + switch (bf_get(lpfc_mbx_read_top_link_spd, la)) { + case LPFC_LINK_SPEED_1GHZ: + case LPFC_LINK_SPEED_2GHZ: + case LPFC_LINK_SPEED_4GHZ: + case LPFC_LINK_SPEED_8GHZ: + case LPFC_LINK_SPEED_10GHZ: + case LPFC_LINK_SPEED_16GHZ: + case LPFC_LINK_SPEED_32GHZ: + case LPFC_LINK_SPEED_64GHZ: + case LPFC_LINK_SPEED_128GHZ: + case LPFC_LINK_SPEED_256GHZ: + break; + default: + phba->fc_linkspeed = LPFC_LINK_SPEED_UNKNOWN; + break; + } + } + + if (phba->fc_topology && + phba->fc_topology != bf_get(lpfc_mbx_read_top_topology, la)) { + lpfc_printf_log(phba, KERN_WARNING, LOG_SLI, + "3314 Toplogy changed was 0x%x is 0x%x\n", + phba->fc_topology, + bf_get(lpfc_mbx_read_top_topology, la)); + phba->fc_topology_changed = 1; + } + + phba->fc_topology = bf_get(lpfc_mbx_read_top_topology, la); + phba->link_flag &= ~(LS_NPIV_FAB_SUPPORTED | LS_CT_VEN_RPA); + + shost = lpfc_shost_from_vport(vport); + if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) { + phba->sli3_options &= ~LPFC_SLI3_NPIV_ENABLED; + + /* if npiv is enabled and this adapter supports npiv log + * a message that npiv is not supported in this topology + */ + if (phba->cfg_enable_npiv && phba->max_vpi) + lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT, + "1309 Link Up Event npiv not supported in loop " + "topology\n"); + /* Get Loop Map information */ + if (bf_get(lpfc_mbx_read_top_il, la)) + fc_flags |= FC_LBIT; + + vport->fc_myDID = bf_get(lpfc_mbx_read_top_alpa_granted, la); + i = la->lilpBde64.tus.f.bdeSize; + + if (i == 0) { + phba->alpa_map[0] = 0; + } else { + if (vport->cfg_log_verbose & LOG_LINK_EVENT) { + int numalpa, j, k; + union { + uint8_t pamap[16]; + struct { + uint32_t wd1; + uint32_t wd2; + uint32_t wd3; + uint32_t wd4; + } pa; + } un; + numalpa = phba->alpa_map[0]; + j = 0; + while (j < numalpa) { + memset(un.pamap, 0, 16); + for (k = 1; j < numalpa; k++) { + un.pamap[k - 1] = + phba->alpa_map[j + 1]; + j++; + if (k == 16) + break; + } + /* Link Up Event ALPA map */ + lpfc_printf_log(phba, + KERN_WARNING, + LOG_LINK_EVENT, + "1304 Link Up Event " + "ALPA map Data: x%x " + "x%x x%x x%x\n", + un.pa.wd1, un.pa.wd2, + un.pa.wd3, un.pa.wd4); + } + } + } + } else { + if (!(phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)) { + if (phba->max_vpi && phba->cfg_enable_npiv && + (phba->sli_rev >= LPFC_SLI_REV3)) + phba->sli3_options |= LPFC_SLI3_NPIV_ENABLED; + } + vport->fc_myDID = phba->fc_pref_DID; + fc_flags |= FC_LBIT; + } + spin_unlock_irqrestore(&phba->hbalock, iflags); + + if (fc_flags) { + spin_lock_irqsave(shost->host_lock, iflags); + vport->fc_flag |= fc_flags; + spin_unlock_irqrestore(shost->host_lock, iflags); + } + + lpfc_linkup(phba); + sparam_mbox = NULL; + + sparam_mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + if (!sparam_mbox) + goto out; + + rc = lpfc_read_sparam(phba, sparam_mbox, 0); + if (rc) { + mempool_free(sparam_mbox, phba->mbox_mem_pool); + goto out; + } + sparam_mbox->vport = vport; + sparam_mbox->mbox_cmpl = lpfc_mbx_cmpl_read_sparam; + rc = lpfc_sli_issue_mbox(phba, sparam_mbox, MBX_NOWAIT); + if (rc == MBX_NOT_FINISHED) { + lpfc_mbox_rsrc_cleanup(phba, sparam_mbox, MBOX_THD_UNLOCKED); + goto out; + } + + if (!(phba->hba_flag & HBA_FCOE_MODE)) { + cfglink_mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + if (!cfglink_mbox) + goto out; + vport->port_state = LPFC_LOCAL_CFG_LINK; + lpfc_config_link(phba, cfglink_mbox); + cfglink_mbox->vport = vport; + cfglink_mbox->mbox_cmpl = lpfc_mbx_cmpl_local_config_link; + rc = lpfc_sli_issue_mbox(phba, cfglink_mbox, MBX_NOWAIT); + if (rc == MBX_NOT_FINISHED) { + mempool_free(cfglink_mbox, phba->mbox_mem_pool); + goto out; + } + } else { + vport->port_state = LPFC_VPORT_UNKNOWN; + /* + * Add the driver's default FCF record at FCF index 0 now. This + * is phase 1 implementation that support FCF index 0 and driver + * defaults. + */ + if (!(phba->hba_flag & HBA_FIP_SUPPORT)) { + fcf_record = kzalloc(sizeof(struct fcf_record), + GFP_KERNEL); + if (unlikely(!fcf_record)) { + lpfc_printf_log(phba, KERN_ERR, + LOG_TRACE_EVENT, + "2554 Could not allocate memory for " + "fcf record\n"); + rc = -ENODEV; + goto out; + } + + lpfc_sli4_build_dflt_fcf_record(phba, fcf_record, + LPFC_FCOE_FCF_DEF_INDEX); + rc = lpfc_sli4_add_fcf_record(phba, fcf_record); + if (unlikely(rc)) { + lpfc_printf_log(phba, KERN_ERR, + LOG_TRACE_EVENT, + "2013 Could not manually add FCF " + "record 0, status %d\n", rc); + rc = -ENODEV; + kfree(fcf_record); + goto out; + } + kfree(fcf_record); + } + /* + * The driver is expected to do FIP/FCF. Call the port + * and get the FCF Table. + */ + spin_lock_irqsave(&phba->hbalock, iflags); + if (phba->hba_flag & FCF_TS_INPROG) { + spin_unlock_irqrestore(&phba->hbalock, iflags); + return; + } + /* This is the initial FCF discovery scan */ + phba->fcf.fcf_flag |= FCF_INIT_DISC; + spin_unlock_irqrestore(&phba->hbalock, iflags); + lpfc_printf_log(phba, KERN_INFO, LOG_FIP | LOG_DISCOVERY, + "2778 Start FCF table scan at linkup\n"); + rc = lpfc_sli4_fcf_scan_read_fcf_rec(phba, + LPFC_FCOE_FCF_GET_FIRST); + if (rc) { + spin_lock_irqsave(&phba->hbalock, iflags); + phba->fcf.fcf_flag &= ~FCF_INIT_DISC; + spin_unlock_irqrestore(&phba->hbalock, iflags); + goto out; + } + /* Reset FCF roundrobin bmask for new discovery */ + lpfc_sli4_clear_fcf_rr_bmask(phba); + } + + /* Prepare for LINK up registrations */ + memset(phba->os_host_name, 0, sizeof(phba->os_host_name)); + scnprintf(phba->os_host_name, sizeof(phba->os_host_name), "%s", + init_utsname()->nodename); + return; +out: + lpfc_vport_set_state(vport, FC_VPORT_FAILED); + lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, + "0263 Discovery Mailbox error: state: 0x%x : x%px x%px\n", + vport->port_state, sparam_mbox, cfglink_mbox); + lpfc_issue_clear_la(phba, vport); + return; +} + +static void +lpfc_enable_la(struct lpfc_hba *phba) +{ + uint32_t control; + struct lpfc_sli *psli = &phba->sli; + spin_lock_irq(&phba->hbalock); + psli->sli_flag |= LPFC_PROCESS_LA; + if (phba->sli_rev <= LPFC_SLI_REV3) { + control = readl(phba->HCregaddr); + control |= HC_LAINT_ENA; + writel(control, phba->HCregaddr); + readl(phba->HCregaddr); /* flush */ + } + spin_unlock_irq(&phba->hbalock); +} + +static void +lpfc_mbx_issue_link_down(struct lpfc_hba *phba) +{ + lpfc_linkdown(phba); + lpfc_enable_la(phba); + lpfc_unregister_unused_fcf(phba); + /* turn on Link Attention interrupts - no CLEAR_LA needed */ +} + + +/* + * This routine handles processing a READ_TOPOLOGY mailbox + * command upon completion. It is setup in the LPFC_MBOXQ + * as the completion routine when the command is + * handed off to the SLI layer. SLI4 only. + */ +void +lpfc_mbx_cmpl_read_topology(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) +{ + struct lpfc_vport *vport = pmb->vport; + struct Scsi_Host *shost = lpfc_shost_from_vport(vport); + struct lpfc_mbx_read_top *la; + struct lpfc_sli_ring *pring; + MAILBOX_t *mb = &pmb->u.mb; + struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *)(pmb->ctx_buf); + uint8_t attn_type; + unsigned long iflags; + + /* Unblock ELS traffic */ + pring = lpfc_phba_elsring(phba); + if (pring) + pring->flag &= ~LPFC_STOP_IOCB_EVENT; + + /* Check for error */ + if (mb->mbxStatus) { + lpfc_printf_log(phba, KERN_INFO, LOG_LINK_EVENT, + "1307 READ_LA mbox error x%x state x%x\n", + mb->mbxStatus, vport->port_state); + lpfc_mbx_issue_link_down(phba); + phba->link_state = LPFC_HBA_ERROR; + goto lpfc_mbx_cmpl_read_topology_free_mbuf; + } + + la = (struct lpfc_mbx_read_top *) &pmb->u.mb.un.varReadTop; + attn_type = bf_get(lpfc_mbx_read_top_att_type, la); + + memcpy(&phba->alpa_map[0], mp->virt, 128); + + spin_lock_irqsave(shost->host_lock, iflags); + if (bf_get(lpfc_mbx_read_top_pb, la)) + vport->fc_flag |= FC_BYPASSED_MODE; + else + vport->fc_flag &= ~FC_BYPASSED_MODE; + spin_unlock_irqrestore(shost->host_lock, iflags); + + if (phba->fc_eventTag <= la->eventTag) { + phba->fc_stat.LinkMultiEvent++; + if (attn_type == LPFC_ATT_LINK_UP) + if (phba->fc_eventTag != 0) + lpfc_linkdown(phba); + } + + phba->fc_eventTag = la->eventTag; + phba->link_events++; + if (attn_type == LPFC_ATT_LINK_UP) { + phba->fc_stat.LinkUp++; + if (phba->link_flag & LS_LOOPBACK_MODE) { + lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT, + "1306 Link Up Event in loop back mode " + "x%x received Data: x%x x%x x%x x%x\n", + la->eventTag, phba->fc_eventTag, + bf_get(lpfc_mbx_read_top_alpa_granted, + la), + bf_get(lpfc_mbx_read_top_link_spd, la), + phba->alpa_map[0]); + } else { + lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT, + "1303 Link Up Event x%x received " + "Data: x%x x%x x%x x%x x%x\n", + la->eventTag, phba->fc_eventTag, + bf_get(lpfc_mbx_read_top_alpa_granted, + la), + bf_get(lpfc_mbx_read_top_link_spd, la), + phba->alpa_map[0], + bf_get(lpfc_mbx_read_top_fa, la)); + } + lpfc_mbx_process_link_up(phba, la); + + if (phba->cmf_active_mode != LPFC_CFG_OFF) + lpfc_cmf_signal_init(phba); + + if (phba->lmt & LMT_64Gb) + lpfc_read_lds_params(phba); + + } else if (attn_type == LPFC_ATT_LINK_DOWN || + attn_type == LPFC_ATT_UNEXP_WWPN) { + phba->fc_stat.LinkDown++; + if (phba->link_flag & LS_LOOPBACK_MODE) + lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT, + "1308 Link Down Event in loop back mode " + "x%x received " + "Data: x%x x%x x%x\n", + la->eventTag, phba->fc_eventTag, + phba->pport->port_state, vport->fc_flag); + else if (attn_type == LPFC_ATT_UNEXP_WWPN) + lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT, + "1313 Link Down Unexpected FA WWPN Event x%x " + "received Data: x%x x%x x%x x%x\n", + la->eventTag, phba->fc_eventTag, + phba->pport->port_state, vport->fc_flag, + bf_get(lpfc_mbx_read_top_fa, la)); + else + lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT, + "1305 Link Down Event x%x received " + "Data: x%x x%x x%x x%x\n", + la->eventTag, phba->fc_eventTag, + phba->pport->port_state, vport->fc_flag, + bf_get(lpfc_mbx_read_top_fa, la)); + lpfc_mbx_issue_link_down(phba); + } + + if ((phba->sli_rev < LPFC_SLI_REV4) && + bf_get(lpfc_mbx_read_top_fa, la)) + lpfc_printf_log(phba, KERN_INFO, LOG_LINK_EVENT, + "1311 fa %d\n", + bf_get(lpfc_mbx_read_top_fa, la)); + +lpfc_mbx_cmpl_read_topology_free_mbuf: + lpfc_mbox_rsrc_cleanup(phba, pmb, MBOX_THD_UNLOCKED); +} + +/* + * This routine handles processing a REG_LOGIN mailbox + * command upon completion. It is setup in the LPFC_MBOXQ + * as the completion routine when the command is + * handed off to the SLI layer. + */ +void +lpfc_mbx_cmpl_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) +{ + struct lpfc_vport *vport = pmb->vport; + struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *)pmb->ctx_buf; + struct lpfc_nodelist *ndlp = (struct lpfc_nodelist *)pmb->ctx_ndlp; + + /* The driver calls the state machine with the pmb pointer + * but wants to make sure a stale ctx_buf isn't acted on. + * The ctx_buf is restored later and cleaned up. + */ + pmb->ctx_buf = NULL; + pmb->ctx_ndlp = NULL; + + lpfc_printf_vlog(vport, KERN_INFO, LOG_SLI | LOG_NODE | LOG_DISCOVERY, + "0002 rpi:%x DID:%x flg:%x %d x%px\n", + ndlp->nlp_rpi, ndlp->nlp_DID, ndlp->nlp_flag, + kref_read(&ndlp->kref), + ndlp); + if (ndlp->nlp_flag & NLP_REG_LOGIN_SEND) + ndlp->nlp_flag &= ~NLP_REG_LOGIN_SEND; + + if (ndlp->nlp_flag & NLP_IGNR_REG_CMPL || + ndlp->nlp_state != NLP_STE_REG_LOGIN_ISSUE) { + /* We rcvd a rscn after issuing this + * mbox reg login, we may have cycled + * back through the state and be + * back at reg login state so this + * mbox needs to be ignored becase + * there is another reg login in + * process. + */ + spin_lock_irq(&ndlp->lock); + ndlp->nlp_flag &= ~NLP_IGNR_REG_CMPL; + spin_unlock_irq(&ndlp->lock); + + /* + * We cannot leave the RPI registered because + * if we go thru discovery again for this ndlp + * a subsequent REG_RPI will fail. + */ + ndlp->nlp_flag |= NLP_RPI_REGISTERED; + lpfc_unreg_rpi(vport, ndlp); + } + + /* Call state machine */ + lpfc_disc_state_machine(vport, ndlp, pmb, NLP_EVT_CMPL_REG_LOGIN); + pmb->ctx_buf = mp; + lpfc_mbox_rsrc_cleanup(phba, pmb, MBOX_THD_UNLOCKED); + + /* decrement the node reference count held for this callback + * function. + */ + lpfc_nlp_put(ndlp); + + return; +} + +static void +lpfc_mbx_cmpl_unreg_vpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) +{ + MAILBOX_t *mb = &pmb->u.mb; + struct lpfc_vport *vport = pmb->vport; + struct Scsi_Host *shost = lpfc_shost_from_vport(vport); + + switch (mb->mbxStatus) { + case 0x0011: + case 0x0020: + lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE, + "0911 cmpl_unreg_vpi, mb status = 0x%x\n", + mb->mbxStatus); + break; + /* If VPI is busy, reset the HBA */ + case 0x9700: + lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, + "2798 Unreg_vpi failed vpi 0x%x, mb status = 0x%x\n", + vport->vpi, mb->mbxStatus); + if (!(phba->pport->load_flag & FC_UNLOADING)) + lpfc_workq_post_event(phba, NULL, NULL, + LPFC_EVT_RESET_HBA); + } + spin_lock_irq(shost->host_lock); + vport->vpi_state &= ~LPFC_VPI_REGISTERED; + vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI; + spin_unlock_irq(shost->host_lock); + mempool_free(pmb, phba->mbox_mem_pool); + lpfc_cleanup_vports_rrqs(vport, NULL); + /* + * This shost reference might have been taken at the beginning of + * lpfc_vport_delete() + */ + if ((vport->load_flag & FC_UNLOADING) && (vport != phba->pport)) + scsi_host_put(shost); +} + +int +lpfc_mbx_unreg_vpi(struct lpfc_vport *vport) +{ + struct lpfc_hba *phba = vport->phba; + LPFC_MBOXQ_t *mbox; + int rc; + + mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + if (!mbox) + return 1; + + lpfc_unreg_vpi(phba, vport->vpi, mbox); + mbox->vport = vport; + mbox->mbox_cmpl = lpfc_mbx_cmpl_unreg_vpi; + rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT); + if (rc == MBX_NOT_FINISHED) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, + "1800 Could not issue unreg_vpi\n"); + mempool_free(mbox, phba->mbox_mem_pool); + return rc; + } + return 0; +} + +static void +lpfc_mbx_cmpl_reg_vpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) +{ + struct lpfc_vport *vport = pmb->vport; + struct Scsi_Host *shost = lpfc_shost_from_vport(vport); + MAILBOX_t *mb = &pmb->u.mb; + + switch (mb->mbxStatus) { + case 0x0011: + case 0x9601: + case 0x9602: + lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE, + "0912 cmpl_reg_vpi, mb status = 0x%x\n", + mb->mbxStatus); + lpfc_vport_set_state(vport, FC_VPORT_FAILED); + spin_lock_irq(shost->host_lock); + vport->fc_flag &= ~(FC_FABRIC | FC_PUBLIC_LOOP); + spin_unlock_irq(shost->host_lock); + vport->fc_myDID = 0; + + if ((vport->cfg_enable_fc4_type == LPFC_ENABLE_BOTH) || + (vport->cfg_enable_fc4_type == LPFC_ENABLE_NVME)) { + if (phba->nvmet_support) + lpfc_nvmet_update_targetport(phba); + else + lpfc_nvme_update_localport(vport); + } + goto out; + } + + spin_lock_irq(shost->host_lock); + vport->vpi_state |= LPFC_VPI_REGISTERED; + vport->fc_flag &= ~FC_VPORT_NEEDS_REG_VPI; + spin_unlock_irq(shost->host_lock); + vport->num_disc_nodes = 0; + /* go thru NPR list and issue ELS PLOGIs */ + if (vport->fc_npr_cnt) + lpfc_els_disc_plogi(vport); + + if (!vport->num_disc_nodes) { + spin_lock_irq(shost->host_lock); + vport->fc_flag &= ~FC_NDISC_ACTIVE; + spin_unlock_irq(shost->host_lock); + lpfc_can_disctmo(vport); + } + vport->port_state = LPFC_VPORT_READY; + +out: + mempool_free(pmb, phba->mbox_mem_pool); + return; +} + +/** + * lpfc_create_static_vport - Read HBA config region to create static vports. + * @phba: pointer to lpfc hba data structure. + * + * This routine issue a DUMP mailbox command for config region 22 to get + * the list of static vports to be created. The function create vports + * based on the information returned from the HBA. + **/ +void +lpfc_create_static_vport(struct lpfc_hba *phba) +{ + LPFC_MBOXQ_t *pmb = NULL; + MAILBOX_t *mb; + struct static_vport_info *vport_info; + int mbx_wait_rc = 0, i; + struct fc_vport_identifiers vport_id; + struct fc_vport *new_fc_vport; + struct Scsi_Host *shost; + struct lpfc_vport *vport; + uint16_t offset = 0; + uint8_t *vport_buff; + struct lpfc_dmabuf *mp; + uint32_t byte_count = 0; + + pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + if (!pmb) { + lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, + "0542 lpfc_create_static_vport failed to" + " allocate mailbox memory\n"); + return; + } + memset(pmb, 0, sizeof(LPFC_MBOXQ_t)); + mb = &pmb->u.mb; + + vport_info = kzalloc(sizeof(struct static_vport_info), GFP_KERNEL); + if (!vport_info) { + lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, + "0543 lpfc_create_static_vport failed to" + " allocate vport_info\n"); + mempool_free(pmb, phba->mbox_mem_pool); + return; + } + + vport_buff = (uint8_t *) vport_info; + do { + /* While loop iteration forces a free dma buffer from + * the previous loop because the mbox is reused and + * the dump routine is a single-use construct. + */ + if (pmb->ctx_buf) { + mp = (struct lpfc_dmabuf *)pmb->ctx_buf; + lpfc_mbuf_free(phba, mp->virt, mp->phys); + kfree(mp); + pmb->ctx_buf = NULL; + } + if (lpfc_dump_static_vport(phba, pmb, offset)) + goto out; + + pmb->vport = phba->pport; + mbx_wait_rc = lpfc_sli_issue_mbox_wait(phba, pmb, + LPFC_MBOX_TMO); + + if ((mbx_wait_rc != MBX_SUCCESS) || mb->mbxStatus) { + lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, + "0544 lpfc_create_static_vport failed to" + " issue dump mailbox command ret 0x%x " + "status 0x%x\n", + mbx_wait_rc, mb->mbxStatus); + goto out; + } + + if (phba->sli_rev == LPFC_SLI_REV4) { + byte_count = pmb->u.mqe.un.mb_words[5]; + mp = (struct lpfc_dmabuf *)pmb->ctx_buf; + if (byte_count > sizeof(struct static_vport_info) - + offset) + byte_count = sizeof(struct static_vport_info) + - offset; + memcpy(vport_buff + offset, mp->virt, byte_count); + offset += byte_count; + } else { + if (mb->un.varDmp.word_cnt > + sizeof(struct static_vport_info) - offset) + mb->un.varDmp.word_cnt = + sizeof(struct static_vport_info) + - offset; + byte_count = mb->un.varDmp.word_cnt; + lpfc_sli_pcimem_bcopy(((uint8_t *)mb) + DMP_RSP_OFFSET, + vport_buff + offset, + byte_count); + + offset += byte_count; + } + + } while (byte_count && + offset < sizeof(struct static_vport_info)); + + + if ((le32_to_cpu(vport_info->signature) != VPORT_INFO_SIG) || + ((le32_to_cpu(vport_info->rev) & VPORT_INFO_REV_MASK) + != VPORT_INFO_REV)) { + lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, + "0545 lpfc_create_static_vport bad" + " information header 0x%x 0x%x\n", + le32_to_cpu(vport_info->signature), + le32_to_cpu(vport_info->rev) & + VPORT_INFO_REV_MASK); + + goto out; + } + + shost = lpfc_shost_from_vport(phba->pport); + + for (i = 0; i < MAX_STATIC_VPORT_COUNT; i++) { + memset(&vport_id, 0, sizeof(vport_id)); + vport_id.port_name = wwn_to_u64(vport_info->vport_list[i].wwpn); + vport_id.node_name = wwn_to_u64(vport_info->vport_list[i].wwnn); + if (!vport_id.port_name || !vport_id.node_name) + continue; + + vport_id.roles = FC_PORT_ROLE_FCP_INITIATOR; + vport_id.vport_type = FC_PORTTYPE_NPIV; + vport_id.disable = false; + new_fc_vport = fc_vport_create(shost, 0, &vport_id); + + if (!new_fc_vport) { + lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, + "0546 lpfc_create_static_vport failed to" + " create vport\n"); + continue; + } + + vport = *(struct lpfc_vport **)new_fc_vport->dd_data; + vport->vport_flag |= STATIC_VPORT; + } + +out: + kfree(vport_info); + if (mbx_wait_rc != MBX_TIMEOUT) + lpfc_mbox_rsrc_cleanup(phba, pmb, MBOX_THD_UNLOCKED); +} + +/* + * This routine handles processing a Fabric REG_LOGIN mailbox + * command upon completion. It is setup in the LPFC_MBOXQ + * as the completion routine when the command is + * handed off to the SLI layer. + */ +void +lpfc_mbx_cmpl_fabric_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) +{ + struct lpfc_vport *vport = pmb->vport; + MAILBOX_t *mb = &pmb->u.mb; + struct lpfc_nodelist *ndlp = (struct lpfc_nodelist *)pmb->ctx_ndlp; + struct Scsi_Host *shost; + + pmb->ctx_ndlp = NULL; + + if (mb->mbxStatus) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, + "0258 Register Fabric login error: 0x%x\n", + mb->mbxStatus); + lpfc_mbox_rsrc_cleanup(phba, pmb, MBOX_THD_UNLOCKED); + if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) { + /* FLOGI failed, use loop map to make discovery list */ + lpfc_disc_list_loopmap(vport); + + /* Start discovery */ + lpfc_disc_start(vport); + /* Decrement the reference count to ndlp after the + * reference to the ndlp are done. + */ + lpfc_nlp_put(ndlp); + return; + } + + lpfc_vport_set_state(vport, FC_VPORT_FAILED); + /* Decrement the reference count to ndlp after the reference + * to the ndlp are done. + */ + lpfc_nlp_put(ndlp); + return; + } + + if (phba->sli_rev < LPFC_SLI_REV4) + ndlp->nlp_rpi = mb->un.varWords[0]; + ndlp->nlp_flag |= NLP_RPI_REGISTERED; + ndlp->nlp_type |= NLP_FABRIC; + lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE); + + if (vport->port_state == LPFC_FABRIC_CFG_LINK) { + /* when physical port receive logo donot start + * vport discovery */ + if (!(vport->fc_flag & FC_LOGO_RCVD_DID_CHNG)) + lpfc_start_fdiscs(phba); + else { + shost = lpfc_shost_from_vport(vport); + spin_lock_irq(shost->host_lock); + vport->fc_flag &= ~FC_LOGO_RCVD_DID_CHNG ; + spin_unlock_irq(shost->host_lock); + } + lpfc_do_scr_ns_plogi(phba, vport); + } + + lpfc_mbox_rsrc_cleanup(phba, pmb, MBOX_THD_UNLOCKED); + + /* Drop the reference count from the mbox at the end after + * all the current reference to the ndlp have been done. + */ + lpfc_nlp_put(ndlp); + return; +} + + /* + * This routine will issue a GID_FT for each FC4 Type supported + * by the driver. ALL GID_FTs must complete before discovery is started. + */ +int +lpfc_issue_gidft(struct lpfc_vport *vport) +{ + /* Good status, issue CT Request to NameServer */ + if ((vport->cfg_enable_fc4_type == LPFC_ENABLE_BOTH) || + (vport->cfg_enable_fc4_type == LPFC_ENABLE_FCP)) { + if (lpfc_ns_cmd(vport, SLI_CTNS_GID_FT, 0, SLI_CTPT_FCP)) { + /* Cannot issue NameServer FCP Query, so finish up + * discovery + */ + lpfc_printf_vlog(vport, KERN_ERR, + LOG_TRACE_EVENT, + "0604 %s FC TYPE %x %s\n", + "Failed to issue GID_FT to ", + FC_TYPE_FCP, + "Finishing discovery."); + return 0; + } + vport->gidft_inp++; + } + + if ((vport->cfg_enable_fc4_type == LPFC_ENABLE_BOTH) || + (vport->cfg_enable_fc4_type == LPFC_ENABLE_NVME)) { + if (lpfc_ns_cmd(vport, SLI_CTNS_GID_FT, 0, SLI_CTPT_NVME)) { + /* Cannot issue NameServer NVME Query, so finish up + * discovery + */ + lpfc_printf_vlog(vport, KERN_ERR, + LOG_TRACE_EVENT, + "0605 %s FC_TYPE %x %s %d\n", + "Failed to issue GID_FT to ", + FC_TYPE_NVME, + "Finishing discovery: gidftinp ", + vport->gidft_inp); + if (vport->gidft_inp == 0) + return 0; + } else + vport->gidft_inp++; + } + return vport->gidft_inp; +} + +/** + * lpfc_issue_gidpt - issue a GID_PT for all N_Ports + * @vport: The virtual port for which this call is being executed. + * + * This routine will issue a GID_PT to get a list of all N_Ports + * + * Return value : + * 0 - Failure to issue a GID_PT + * 1 - GID_PT issued + **/ +int +lpfc_issue_gidpt(struct lpfc_vport *vport) +{ + /* Good status, issue CT Request to NameServer */ + if (lpfc_ns_cmd(vport, SLI_CTNS_GID_PT, 0, GID_PT_N_PORT)) { + /* Cannot issue NameServer FCP Query, so finish up + * discovery + */ + lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, + "0606 %s Port TYPE %x %s\n", + "Failed to issue GID_PT to ", + GID_PT_N_PORT, + "Finishing discovery."); + return 0; + } + vport->gidft_inp++; + return 1; +} + +/* + * This routine handles processing a NameServer REG_LOGIN mailbox + * command upon completion. It is setup in the LPFC_MBOXQ + * as the completion routine when the command is + * handed off to the SLI layer. + */ +void +lpfc_mbx_cmpl_ns_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) +{ + MAILBOX_t *mb = &pmb->u.mb; + struct lpfc_nodelist *ndlp = (struct lpfc_nodelist *)pmb->ctx_ndlp; + struct lpfc_vport *vport = pmb->vport; + int rc; + + pmb->ctx_ndlp = NULL; + vport->gidft_inp = 0; + + if (mb->mbxStatus) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, + "0260 Register NameServer error: 0x%x\n", + mb->mbxStatus); + +out: + /* decrement the node reference count held for this + * callback function. + */ + lpfc_nlp_put(ndlp); + lpfc_mbox_rsrc_cleanup(phba, pmb, MBOX_THD_UNLOCKED); + + /* If the node is not registered with the scsi or nvme + * transport, remove the fabric node. The failed reg_login + * is terminal and forces the removal of the last node + * reference. + */ + if (!(ndlp->fc4_xpt_flags & (SCSI_XPT_REGD | NVME_XPT_REGD))) { + spin_lock_irq(&ndlp->lock); + ndlp->nlp_flag &= ~NLP_NPR_2B_DISC; + spin_unlock_irq(&ndlp->lock); + lpfc_nlp_put(ndlp); + } + + if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) { + /* + * RegLogin failed, use loop map to make discovery + * list + */ + lpfc_disc_list_loopmap(vport); + + /* Start discovery */ + lpfc_disc_start(vport); + return; + } + lpfc_vport_set_state(vport, FC_VPORT_FAILED); + return; + } + + if (phba->sli_rev < LPFC_SLI_REV4) + ndlp->nlp_rpi = mb->un.varWords[0]; + ndlp->nlp_flag |= NLP_RPI_REGISTERED; + ndlp->nlp_type |= NLP_FABRIC; + lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE); + lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE | LOG_DISCOVERY, + "0003 rpi:%x DID:%x flg:%x %d x%px\n", + ndlp->nlp_rpi, ndlp->nlp_DID, ndlp->nlp_flag, + kref_read(&ndlp->kref), + ndlp); + + if (vport->port_state < LPFC_VPORT_READY) { + /* Link up discovery requires Fabric registration. */ + lpfc_ns_cmd(vport, SLI_CTNS_RNN_ID, 0, 0); + lpfc_ns_cmd(vport, SLI_CTNS_RSNN_NN, 0, 0); + lpfc_ns_cmd(vport, SLI_CTNS_RSPN_ID, 0, 0); + lpfc_ns_cmd(vport, SLI_CTNS_RFT_ID, 0, 0); + + if ((vport->cfg_enable_fc4_type == LPFC_ENABLE_BOTH) || + (vport->cfg_enable_fc4_type == LPFC_ENABLE_FCP)) + lpfc_ns_cmd(vport, SLI_CTNS_RFF_ID, 0, FC_TYPE_FCP); + + if ((vport->cfg_enable_fc4_type == LPFC_ENABLE_BOTH) || + (vport->cfg_enable_fc4_type == LPFC_ENABLE_NVME)) + lpfc_ns_cmd(vport, SLI_CTNS_RFF_ID, 0, + FC_TYPE_NVME); + + /* Issue SCR just before NameServer GID_FT Query */ + lpfc_issue_els_scr(vport, 0); + + /* Link was bounced or a Fabric LOGO occurred. Start EDC + * with initial FW values provided the congestion mode is + * not off. Note that signals may or may not be supported + * by the adapter but FPIN is provided by default for 1 + * or both missing signals support. + */ + if (phba->cmf_active_mode != LPFC_CFG_OFF) { + phba->cgn_reg_fpin = phba->cgn_init_reg_fpin; + phba->cgn_reg_signal = phba->cgn_init_reg_signal; + rc = lpfc_issue_els_edc(vport, 0); + lpfc_printf_log(phba, KERN_INFO, + LOG_INIT | LOG_ELS | LOG_DISCOVERY, + "4220 Issue EDC status x%x Data x%x\n", + rc, phba->cgn_init_reg_signal); + } else if (phba->lmt & LMT_64Gb) { + /* may send link fault capability descriptor */ + lpfc_issue_els_edc(vport, 0); + } else { + lpfc_issue_els_rdf(vport, 0); + } + } + + vport->fc_ns_retry = 0; + if (lpfc_issue_gidft(vport) == 0) + goto out; + + /* + * At this point in time we may need to wait for multiple + * SLI_CTNS_GID_FT CT commands to complete before we start discovery. + * + * decrement the node reference count held for this + * callback function. + */ + lpfc_nlp_put(ndlp); + lpfc_mbox_rsrc_cleanup(phba, pmb, MBOX_THD_UNLOCKED); + return; +} + +/* + * This routine handles processing a Fabric Controller REG_LOGIN mailbox + * command upon completion. It is setup in the LPFC_MBOXQ + * as the completion routine when the command is handed off to the SLI layer. + */ +void +lpfc_mbx_cmpl_fc_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) +{ + struct lpfc_vport *vport = pmb->vport; + MAILBOX_t *mb = &pmb->u.mb; + struct lpfc_nodelist *ndlp = (struct lpfc_nodelist *)pmb->ctx_ndlp; + + pmb->ctx_ndlp = NULL; + if (mb->mbxStatus) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, + "0933 %s: Register FC login error: 0x%x\n", + __func__, mb->mbxStatus); + goto out; + } + + lpfc_check_nlp_post_devloss(vport, ndlp); + + if (phba->sli_rev < LPFC_SLI_REV4) + ndlp->nlp_rpi = mb->un.varWords[0]; + + lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE, + "0934 %s: Complete FC x%x RegLogin rpi x%x ste x%x\n", + __func__, ndlp->nlp_DID, ndlp->nlp_rpi, + ndlp->nlp_state); + + ndlp->nlp_flag |= NLP_RPI_REGISTERED; + ndlp->nlp_flag &= ~NLP_REG_LOGIN_SEND; + ndlp->nlp_type |= NLP_FABRIC; + lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE); + + out: + lpfc_mbox_rsrc_cleanup(phba, pmb, MBOX_THD_UNLOCKED); + + /* Drop the reference count from the mbox at the end after + * all the current reference to the ndlp have been done. + */ + lpfc_nlp_put(ndlp); +} + +static void +lpfc_register_remote_port(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) +{ + struct Scsi_Host *shost = lpfc_shost_from_vport(vport); + struct fc_rport *rport; + struct lpfc_rport_data *rdata; + struct fc_rport_identifiers rport_ids; + struct lpfc_hba *phba = vport->phba; + unsigned long flags; + + if (vport->cfg_enable_fc4_type == LPFC_ENABLE_NVME) + return; + + /* Remote port has reappeared. Re-register w/ FC transport */ + rport_ids.node_name = wwn_to_u64(ndlp->nlp_nodename.u.wwn); + rport_ids.port_name = wwn_to_u64(ndlp->nlp_portname.u.wwn); + rport_ids.port_id = ndlp->nlp_DID; + rport_ids.roles = FC_RPORT_ROLE_UNKNOWN; + + + lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_RPORT, + "rport add: did:x%x flg:x%x type x%x", + ndlp->nlp_DID, ndlp->nlp_flag, ndlp->nlp_type); + + /* Don't add the remote port if unloading. */ + if (vport->load_flag & FC_UNLOADING) + return; + + /* + * Disassociate any older association between this ndlp and rport + */ + if (ndlp->rport) { + rdata = ndlp->rport->dd_data; + rdata->pnode = NULL; + } + + ndlp->rport = rport = fc_remote_port_add(shost, 0, &rport_ids); + if (!rport) { + dev_printk(KERN_WARNING, &phba->pcidev->dev, + "Warning: fc_remote_port_add failed\n"); + return; + } + + /* Successful port add. Complete initializing node data */ + rport->maxframe_size = ndlp->nlp_maxframe; + rport->supported_classes = ndlp->nlp_class_sup; + rdata = rport->dd_data; + rdata->pnode = lpfc_nlp_get(ndlp); + if (!rdata->pnode) { + dev_warn(&phba->pcidev->dev, + "Warning - node ref failed. Unreg rport\n"); + fc_remote_port_delete(rport); + ndlp->rport = NULL; + return; + } + + spin_lock_irqsave(&ndlp->lock, flags); + ndlp->fc4_xpt_flags |= SCSI_XPT_REGD; + spin_unlock_irqrestore(&ndlp->lock, flags); + + if (ndlp->nlp_type & NLP_FCP_TARGET) + rport_ids.roles |= FC_PORT_ROLE_FCP_TARGET; + if (ndlp->nlp_type & NLP_FCP_INITIATOR) + rport_ids.roles |= FC_PORT_ROLE_FCP_INITIATOR; + if (ndlp->nlp_type & NLP_NVME_INITIATOR) + rport_ids.roles |= FC_PORT_ROLE_NVME_INITIATOR; + if (ndlp->nlp_type & NLP_NVME_TARGET) + rport_ids.roles |= FC_PORT_ROLE_NVME_TARGET; + if (ndlp->nlp_type & NLP_NVME_DISCOVERY) + rport_ids.roles |= FC_PORT_ROLE_NVME_DISCOVERY; + + if (rport_ids.roles != FC_RPORT_ROLE_UNKNOWN) + fc_remote_port_rolechg(rport, rport_ids.roles); + + lpfc_printf_vlog(ndlp->vport, KERN_INFO, LOG_NODE, + "3183 %s rport x%px DID x%x, role x%x refcnt %d\n", + __func__, rport, rport->port_id, rport->roles, + kref_read(&ndlp->kref)); + + if ((rport->scsi_target_id != -1) && + (rport->scsi_target_id < LPFC_MAX_TARGET)) { + ndlp->nlp_sid = rport->scsi_target_id; + } + + return; +} + +static void +lpfc_unregister_remote_port(struct lpfc_nodelist *ndlp) +{ + struct fc_rport *rport = ndlp->rport; + struct lpfc_vport *vport = ndlp->vport; + + if (vport->cfg_enable_fc4_type == LPFC_ENABLE_NVME) + return; + + lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_RPORT, + "rport delete: did:x%x flg:x%x type x%x", + ndlp->nlp_DID, ndlp->nlp_flag, ndlp->nlp_type); + + lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE, + "3184 rport unregister x%06x, rport x%px " + "xptflg x%x refcnt %d\n", + ndlp->nlp_DID, rport, ndlp->fc4_xpt_flags, + kref_read(&ndlp->kref)); + + fc_remote_port_delete(rport); + lpfc_nlp_put(ndlp); +} + +static void +lpfc_nlp_counters(struct lpfc_vport *vport, int state, int count) +{ + struct Scsi_Host *shost = lpfc_shost_from_vport(vport); + unsigned long iflags; + + spin_lock_irqsave(shost->host_lock, iflags); + switch (state) { + case NLP_STE_UNUSED_NODE: + vport->fc_unused_cnt += count; + break; + case NLP_STE_PLOGI_ISSUE: + vport->fc_plogi_cnt += count; + break; + case NLP_STE_ADISC_ISSUE: + vport->fc_adisc_cnt += count; + break; + case NLP_STE_REG_LOGIN_ISSUE: + vport->fc_reglogin_cnt += count; + break; + case NLP_STE_PRLI_ISSUE: + vport->fc_prli_cnt += count; + break; + case NLP_STE_UNMAPPED_NODE: + vport->fc_unmap_cnt += count; + break; + case NLP_STE_MAPPED_NODE: + vport->fc_map_cnt += count; + break; + case NLP_STE_NPR_NODE: + if (vport->fc_npr_cnt == 0 && count == -1) + vport->fc_npr_cnt = 0; + else + vport->fc_npr_cnt += count; + break; + } + spin_unlock_irqrestore(shost->host_lock, iflags); +} + +/* Register a node with backend if not already done */ +void +lpfc_nlp_reg_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) +{ + unsigned long iflags; + + lpfc_check_nlp_post_devloss(vport, ndlp); + + spin_lock_irqsave(&ndlp->lock, iflags); + if (ndlp->fc4_xpt_flags & NLP_XPT_REGD) { + /* Already registered with backend, trigger rescan */ + spin_unlock_irqrestore(&ndlp->lock, iflags); + + if (ndlp->fc4_xpt_flags & NVME_XPT_REGD && + ndlp->nlp_type & (NLP_NVME_TARGET | NLP_NVME_DISCOVERY)) { + lpfc_nvme_rescan_port(vport, ndlp); + } + return; + } + + ndlp->fc4_xpt_flags |= NLP_XPT_REGD; + spin_unlock_irqrestore(&ndlp->lock, iflags); + + if (lpfc_valid_xpt_node(ndlp)) { + vport->phba->nport_event_cnt++; + /* + * Tell the fc transport about the port, if we haven't + * already. If we have, and it's a scsi entity, be + */ + lpfc_register_remote_port(vport, ndlp); + } + + /* We are done if we do not have any NVME remote node */ + if (!(ndlp->nlp_fc4_type & NLP_FC4_NVME)) + return; + + /* Notify the NVME transport of this new rport. */ + if (vport->phba->sli_rev >= LPFC_SLI_REV4 && + ndlp->nlp_fc4_type & NLP_FC4_NVME) { + if (vport->phba->nvmet_support == 0) { + /* Register this rport with the transport. + * Only NVME Target Rports are registered with + * the transport. + */ + if (ndlp->nlp_type & NLP_NVME_TARGET) { + vport->phba->nport_event_cnt++; + lpfc_nvme_register_port(vport, ndlp); + } + } else { + /* Just take an NDLP ref count since the + * target does not register rports. + */ + lpfc_nlp_get(ndlp); + } + } +} + +/* Unregister a node with backend if not already done */ +void +lpfc_nlp_unreg_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) +{ + unsigned long iflags; + + spin_lock_irqsave(&ndlp->lock, iflags); + if (!(ndlp->fc4_xpt_flags & NLP_XPT_REGD)) { + spin_unlock_irqrestore(&ndlp->lock, iflags); + lpfc_printf_vlog(vport, KERN_INFO, LOG_SLI, + "0999 %s Not regd: ndlp x%px rport x%px DID " + "x%x FLG x%x XPT x%x\n", + __func__, ndlp, ndlp->rport, ndlp->nlp_DID, + ndlp->nlp_flag, ndlp->fc4_xpt_flags); + return; + } + + ndlp->fc4_xpt_flags &= ~NLP_XPT_REGD; + spin_unlock_irqrestore(&ndlp->lock, iflags); + + if (ndlp->rport && + ndlp->fc4_xpt_flags & SCSI_XPT_REGD) { + vport->phba->nport_event_cnt++; + lpfc_unregister_remote_port(ndlp); + } else if (!ndlp->rport) { + lpfc_printf_vlog(vport, KERN_INFO, LOG_SLI, + "1999 %s NDLP in devloss x%px DID x%x FLG x%x" + " XPT x%x refcnt %d\n", + __func__, ndlp, ndlp->nlp_DID, ndlp->nlp_flag, + ndlp->fc4_xpt_flags, + kref_read(&ndlp->kref)); + } + + if (ndlp->fc4_xpt_flags & NVME_XPT_REGD) { + vport->phba->nport_event_cnt++; + if (vport->phba->nvmet_support == 0) { + /* Start devloss if target. */ + if (ndlp->nlp_type & NLP_NVME_TARGET) + lpfc_nvme_unregister_port(vport, ndlp); + } else { + /* NVMET has no upcall. */ + lpfc_nlp_put(ndlp); + } + } + +} + +/* + * Adisc state change handling + */ +static void +lpfc_handle_adisc_state(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, + int new_state) +{ + switch (new_state) { + /* + * Any state to ADISC_ISSUE + * Do nothing, adisc cmpl handling will trigger state changes + */ + case NLP_STE_ADISC_ISSUE: + break; + + /* + * ADISC_ISSUE to mapped states + * Trigger a registration with backend, it will be nop if + * already registered + */ + case NLP_STE_UNMAPPED_NODE: + ndlp->nlp_type |= NLP_FC_NODE; + fallthrough; + case NLP_STE_MAPPED_NODE: + ndlp->nlp_flag &= ~NLP_NODEV_REMOVE; + lpfc_nlp_reg_node(vport, ndlp); + break; + + /* + * ADISC_ISSUE to non-mapped states + * We are moving from ADISC_ISSUE to a non-mapped state because + * ADISC failed, we would have skipped unregistering with + * backend, attempt it now + */ + case NLP_STE_NPR_NODE: + ndlp->nlp_flag &= ~NLP_RCV_PLOGI; + fallthrough; + default: + lpfc_nlp_unreg_node(vport, ndlp); + break; + } + +} + +static void +lpfc_nlp_state_cleanup(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, + int old_state, int new_state) +{ + /* Trap ADISC changes here */ + if (new_state == NLP_STE_ADISC_ISSUE || + old_state == NLP_STE_ADISC_ISSUE) { + lpfc_handle_adisc_state(vport, ndlp, new_state); + return; + } + + if (new_state == NLP_STE_UNMAPPED_NODE) { + ndlp->nlp_flag &= ~NLP_NODEV_REMOVE; + ndlp->nlp_type |= NLP_FC_NODE; + } + if (new_state == NLP_STE_MAPPED_NODE) + ndlp->nlp_flag &= ~NLP_NODEV_REMOVE; + if (new_state == NLP_STE_NPR_NODE) + ndlp->nlp_flag &= ~NLP_RCV_PLOGI; + + /* Reg/Unreg for FCP and NVME Transport interface */ + if ((old_state == NLP_STE_MAPPED_NODE || + old_state == NLP_STE_UNMAPPED_NODE)) { + /* For nodes marked for ADISC, Handle unreg in ADISC cmpl + * if linkup. In linkdown do unreg_node + */ + if (!(ndlp->nlp_flag & NLP_NPR_ADISC) || + !lpfc_is_link_up(vport->phba)) + lpfc_nlp_unreg_node(vport, ndlp); + } + + if (new_state == NLP_STE_MAPPED_NODE || + new_state == NLP_STE_UNMAPPED_NODE) + lpfc_nlp_reg_node(vport, ndlp); + + /* + * If the node just added to Mapped list was an FCP target, + * but the remote port registration failed or assigned a target + * id outside the presentable range - move the node to the + * Unmapped List. + */ + if ((new_state == NLP_STE_MAPPED_NODE) && + (ndlp->nlp_type & NLP_FCP_TARGET) && + (!ndlp->rport || + ndlp->rport->scsi_target_id == -1 || + ndlp->rport->scsi_target_id >= LPFC_MAX_TARGET)) { + spin_lock_irq(&ndlp->lock); + ndlp->nlp_flag |= NLP_TGT_NO_SCSIID; + spin_unlock_irq(&ndlp->lock); + lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE); + } +} + +static char * +lpfc_nlp_state_name(char *buffer, size_t size, int state) +{ + static char *states[] = { + [NLP_STE_UNUSED_NODE] = "UNUSED", + [NLP_STE_PLOGI_ISSUE] = "PLOGI", + [NLP_STE_ADISC_ISSUE] = "ADISC", + [NLP_STE_REG_LOGIN_ISSUE] = "REGLOGIN", + [NLP_STE_PRLI_ISSUE] = "PRLI", + [NLP_STE_LOGO_ISSUE] = "LOGO", + [NLP_STE_UNMAPPED_NODE] = "UNMAPPED", + [NLP_STE_MAPPED_NODE] = "MAPPED", + [NLP_STE_NPR_NODE] = "NPR", + }; + + if (state < NLP_STE_MAX_STATE && states[state]) + strlcpy(buffer, states[state], size); + else + snprintf(buffer, size, "unknown (%d)", state); + return buffer; +} + +void +lpfc_nlp_set_state(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, + int state) +{ + struct Scsi_Host *shost = lpfc_shost_from_vport(vport); + int old_state = ndlp->nlp_state; + int node_dropped = ndlp->nlp_flag & NLP_DROPPED; + char name1[16], name2[16]; + + lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE, + "0904 NPort state transition x%06x, %s -> %s\n", + ndlp->nlp_DID, + lpfc_nlp_state_name(name1, sizeof(name1), old_state), + lpfc_nlp_state_name(name2, sizeof(name2), state)); + + lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_NODE, + "node statechg did:x%x old:%d ste:%d", + ndlp->nlp_DID, old_state, state); + + if (node_dropped && old_state == NLP_STE_UNUSED_NODE && + state != NLP_STE_UNUSED_NODE) { + ndlp->nlp_flag &= ~NLP_DROPPED; + lpfc_nlp_get(ndlp); + } + + if (old_state == NLP_STE_NPR_NODE && + state != NLP_STE_NPR_NODE) + lpfc_cancel_retry_delay_tmo(vport, ndlp); + if (old_state == NLP_STE_UNMAPPED_NODE) { + ndlp->nlp_flag &= ~NLP_TGT_NO_SCSIID; + ndlp->nlp_type &= ~NLP_FC_NODE; + } + + if (list_empty(&ndlp->nlp_listp)) { + spin_lock_irq(shost->host_lock); + list_add_tail(&ndlp->nlp_listp, &vport->fc_nodes); + spin_unlock_irq(shost->host_lock); + } else if (old_state) + lpfc_nlp_counters(vport, old_state, -1); + + ndlp->nlp_state = state; + lpfc_nlp_counters(vport, state, 1); + lpfc_nlp_state_cleanup(vport, ndlp, old_state, state); +} + +void +lpfc_enqueue_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) +{ + struct Scsi_Host *shost = lpfc_shost_from_vport(vport); + + if (list_empty(&ndlp->nlp_listp)) { + spin_lock_irq(shost->host_lock); + list_add_tail(&ndlp->nlp_listp, &vport->fc_nodes); + spin_unlock_irq(shost->host_lock); + } +} + +void +lpfc_dequeue_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) +{ + struct Scsi_Host *shost = lpfc_shost_from_vport(vport); + + lpfc_cancel_retry_delay_tmo(vport, ndlp); + if (ndlp->nlp_state && !list_empty(&ndlp->nlp_listp)) + lpfc_nlp_counters(vport, ndlp->nlp_state, -1); + spin_lock_irq(shost->host_lock); + list_del_init(&ndlp->nlp_listp); + spin_unlock_irq(shost->host_lock); + lpfc_nlp_state_cleanup(vport, ndlp, ndlp->nlp_state, + NLP_STE_UNUSED_NODE); +} + +/** + * lpfc_initialize_node - Initialize all fields of node object + * @vport: Pointer to Virtual Port object. + * @ndlp: Pointer to FC node object. + * @did: FC_ID of the node. + * + * This function is always called when node object need to be initialized. + * It initializes all the fields of the node object. Although the reference + * to phba from @ndlp can be obtained indirectly through it's reference to + * @vport, a direct reference to phba is taken here by @ndlp. This is due + * to the life-span of the @ndlp might go beyond the existence of @vport as + * the final release of ndlp is determined by its reference count. And, the + * operation on @ndlp needs the reference to phba. + **/ +static inline void +lpfc_initialize_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, + uint32_t did) +{ + INIT_LIST_HEAD(&ndlp->els_retry_evt.evt_listp); + INIT_LIST_HEAD(&ndlp->dev_loss_evt.evt_listp); + timer_setup(&ndlp->nlp_delayfunc, lpfc_els_retry_delay, 0); + INIT_LIST_HEAD(&ndlp->recovery_evt.evt_listp); + + ndlp->nlp_DID = did; + ndlp->vport = vport; + ndlp->phba = vport->phba; + ndlp->nlp_sid = NLP_NO_SID; + ndlp->nlp_fc4_type = NLP_FC4_NONE; + kref_init(&ndlp->kref); + atomic_set(&ndlp->cmd_pending, 0); + ndlp->cmd_qdepth = vport->cfg_tgt_queue_depth; + ndlp->nlp_defer_did = NLP_EVT_NOTHING_PENDING; +} + +void +lpfc_drop_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) +{ + /* + * Use of lpfc_drop_node and UNUSED list: lpfc_drop_node should + * be used if we wish to issue the "last" lpfc_nlp_put() to remove + * the ndlp from the vport. The ndlp marked as UNUSED on the list + * until ALL other outstanding threads have completed. We check + * that the ndlp not already in the UNUSED state before we proceed. + */ + if (ndlp->nlp_state == NLP_STE_UNUSED_NODE) + return; + lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNUSED_NODE); + ndlp->nlp_flag |= NLP_DROPPED; + if (vport->phba->sli_rev == LPFC_SLI_REV4) { + lpfc_cleanup_vports_rrqs(vport, ndlp); + lpfc_unreg_rpi(vport, ndlp); + } + + lpfc_nlp_put(ndlp); + return; +} + +/* + * Start / ReStart rescue timer for Discovery / RSCN handling + */ +void +lpfc_set_disctmo(struct lpfc_vport *vport) +{ + struct Scsi_Host *shost = lpfc_shost_from_vport(vport); + struct lpfc_hba *phba = vport->phba; + uint32_t tmo; + + if (vport->port_state == LPFC_LOCAL_CFG_LINK) { + /* For FAN, timeout should be greater than edtov */ + tmo = (((phba->fc_edtov + 999) / 1000) + 1); + } else { + /* Normal discovery timeout should be > than ELS/CT timeout + * FC spec states we need 3 * ratov for CT requests + */ + tmo = ((phba->fc_ratov * 3) + 3); + } + + + if (!timer_pending(&vport->fc_disctmo)) { + lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD, + "set disc timer: tmo:x%x state:x%x flg:x%x", + tmo, vport->port_state, vport->fc_flag); + } + + mod_timer(&vport->fc_disctmo, jiffies + msecs_to_jiffies(1000 * tmo)); + spin_lock_irq(shost->host_lock); + vport->fc_flag |= FC_DISC_TMO; + spin_unlock_irq(shost->host_lock); + + /* Start Discovery Timer state <hba_state> */ + lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY, + "0247 Start Discovery Timer state x%x " + "Data: x%x x%lx x%x x%x\n", + vport->port_state, tmo, + (unsigned long)&vport->fc_disctmo, vport->fc_plogi_cnt, + vport->fc_adisc_cnt); + + return; +} + +/* + * Cancel rescue timer for Discovery / RSCN handling + */ +int +lpfc_can_disctmo(struct lpfc_vport *vport) +{ + struct Scsi_Host *shost = lpfc_shost_from_vport(vport); + unsigned long iflags; + + lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD, + "can disc timer: state:x%x rtry:x%x flg:x%x", + vport->port_state, vport->fc_ns_retry, vport->fc_flag); + + /* Turn off discovery timer if its running */ + if (vport->fc_flag & FC_DISC_TMO || + timer_pending(&vport->fc_disctmo)) { + spin_lock_irqsave(shost->host_lock, iflags); + vport->fc_flag &= ~FC_DISC_TMO; + spin_unlock_irqrestore(shost->host_lock, iflags); + del_timer_sync(&vport->fc_disctmo); + spin_lock_irqsave(&vport->work_port_lock, iflags); + vport->work_port_events &= ~WORKER_DISC_TMO; + spin_unlock_irqrestore(&vport->work_port_lock, iflags); + } + + /* Cancel Discovery Timer state <hba_state> */ + lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY, + "0248 Cancel Discovery Timer state x%x " + "Data: x%x x%x x%x\n", + vport->port_state, vport->fc_flag, + vport->fc_plogi_cnt, vport->fc_adisc_cnt); + return 0; +} + +/* + * Check specified ring for outstanding IOCB on the SLI queue + * Return true if iocb matches the specified nport + */ +int +lpfc_check_sli_ndlp(struct lpfc_hba *phba, + struct lpfc_sli_ring *pring, + struct lpfc_iocbq *iocb, + struct lpfc_nodelist *ndlp) +{ + struct lpfc_vport *vport = ndlp->vport; + u8 ulp_command; + u16 ulp_context; + u32 remote_id; + + if (iocb->vport != vport) + return 0; + + ulp_command = get_job_cmnd(phba, iocb); + ulp_context = get_job_ulpcontext(phba, iocb); + remote_id = get_job_els_rsp64_did(phba, iocb); + + if (pring->ringno == LPFC_ELS_RING) { + switch (ulp_command) { + case CMD_GEN_REQUEST64_CR: + if (iocb->ndlp == ndlp) + return 1; + fallthrough; + case CMD_ELS_REQUEST64_CR: + if (remote_id == ndlp->nlp_DID) + return 1; + fallthrough; + case CMD_XMIT_ELS_RSP64_CX: + if (iocb->ndlp == ndlp) + return 1; + } + } else if (pring->ringno == LPFC_FCP_RING) { + /* Skip match check if waiting to relogin to FCP target */ + if ((ndlp->nlp_type & NLP_FCP_TARGET) && + (ndlp->nlp_flag & NLP_DELAY_TMO)) { + return 0; + } + if (ulp_context == ndlp->nlp_rpi) + return 1; + } + return 0; +} + +static void +__lpfc_dequeue_nport_iocbs(struct lpfc_hba *phba, + struct lpfc_nodelist *ndlp, struct lpfc_sli_ring *pring, + struct list_head *dequeue_list) +{ + struct lpfc_iocbq *iocb, *next_iocb; + + list_for_each_entry_safe(iocb, next_iocb, &pring->txq, list) { + /* Check to see if iocb matches the nport */ + if (lpfc_check_sli_ndlp(phba, pring, iocb, ndlp)) + /* match, dequeue */ + list_move_tail(&iocb->list, dequeue_list); + } +} + +static void +lpfc_sli3_dequeue_nport_iocbs(struct lpfc_hba *phba, + struct lpfc_nodelist *ndlp, struct list_head *dequeue_list) +{ + struct lpfc_sli *psli = &phba->sli; + uint32_t i; + + spin_lock_irq(&phba->hbalock); + for (i = 0; i < psli->num_rings; i++) + __lpfc_dequeue_nport_iocbs(phba, ndlp, &psli->sli3_ring[i], + dequeue_list); + spin_unlock_irq(&phba->hbalock); +} + +static void +lpfc_sli4_dequeue_nport_iocbs(struct lpfc_hba *phba, + struct lpfc_nodelist *ndlp, struct list_head *dequeue_list) +{ + struct lpfc_sli_ring *pring; + struct lpfc_queue *qp = NULL; + + spin_lock_irq(&phba->hbalock); + list_for_each_entry(qp, &phba->sli4_hba.lpfc_wq_list, wq_list) { + pring = qp->pring; + if (!pring) + continue; + spin_lock(&pring->ring_lock); + __lpfc_dequeue_nport_iocbs(phba, ndlp, pring, dequeue_list); + spin_unlock(&pring->ring_lock); + } + spin_unlock_irq(&phba->hbalock); +} + +/* + * Free resources / clean up outstanding I/Os + * associated with nlp_rpi in the LPFC_NODELIST entry. + */ +static int +lpfc_no_rpi(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp) +{ + LIST_HEAD(completions); + + lpfc_fabric_abort_nport(ndlp); + + /* + * Everything that matches on txcmplq will be returned + * by firmware with a no rpi error. + */ + if (ndlp->nlp_flag & NLP_RPI_REGISTERED) { + if (phba->sli_rev != LPFC_SLI_REV4) + lpfc_sli3_dequeue_nport_iocbs(phba, ndlp, &completions); + else + lpfc_sli4_dequeue_nport_iocbs(phba, ndlp, &completions); + } + + /* Cancel all the IOCBs from the completions list */ + lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, + IOERR_SLI_ABORTED); + + return 0; +} + +/** + * lpfc_nlp_logo_unreg - Unreg mailbox completion handler before LOGO + * @phba: Pointer to HBA context object. + * @pmb: Pointer to mailbox object. + * + * This function will issue an ELS LOGO command after completing + * the UNREG_RPI. + **/ +static void +lpfc_nlp_logo_unreg(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) +{ + struct lpfc_vport *vport = pmb->vport; + struct lpfc_nodelist *ndlp; + + ndlp = (struct lpfc_nodelist *)(pmb->ctx_ndlp); + if (!ndlp) + return; + lpfc_issue_els_logo(vport, ndlp, 0); + + /* Check to see if there are any deferred events to process */ + if ((ndlp->nlp_flag & NLP_UNREG_INP) && + (ndlp->nlp_defer_did != NLP_EVT_NOTHING_PENDING)) { + lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY, + "1434 UNREG cmpl deferred logo x%x " + "on NPort x%x Data: x%x x%px\n", + ndlp->nlp_rpi, ndlp->nlp_DID, + ndlp->nlp_defer_did, ndlp); + + ndlp->nlp_flag &= ~NLP_UNREG_INP; + ndlp->nlp_defer_did = NLP_EVT_NOTHING_PENDING; + lpfc_issue_els_plogi(vport, ndlp->nlp_DID, 0); + } else { + /* NLP_RELEASE_RPI is only set for SLI4 ports. */ + if (ndlp->nlp_flag & NLP_RELEASE_RPI) { + lpfc_sli4_free_rpi(vport->phba, ndlp->nlp_rpi); + spin_lock_irq(&ndlp->lock); + ndlp->nlp_flag &= ~NLP_RELEASE_RPI; + ndlp->nlp_rpi = LPFC_RPI_ALLOC_ERROR; + spin_unlock_irq(&ndlp->lock); + } + spin_lock_irq(&ndlp->lock); + ndlp->nlp_flag &= ~NLP_UNREG_INP; + spin_unlock_irq(&ndlp->lock); + } + + /* The node has an outstanding reference for the unreg. Now + * that the LOGO action and cleanup are finished, release + * resources. + */ + lpfc_nlp_put(ndlp); + mempool_free(pmb, phba->mbox_mem_pool); +} + +/* + * Sets the mailbox completion handler to be used for the + * unreg_rpi command. The handler varies based on the state of + * the port and what will be happening to the rpi next. + */ +static void +lpfc_set_unreg_login_mbx_cmpl(struct lpfc_hba *phba, struct lpfc_vport *vport, + struct lpfc_nodelist *ndlp, LPFC_MBOXQ_t *mbox) +{ + unsigned long iflags; + + /* Driver always gets a reference on the mailbox job + * in support of async jobs. + */ + mbox->ctx_ndlp = lpfc_nlp_get(ndlp); + if (!mbox->ctx_ndlp) + return; + + if (ndlp->nlp_flag & NLP_ISSUE_LOGO) { + mbox->mbox_cmpl = lpfc_nlp_logo_unreg; + + } else if (phba->sli_rev == LPFC_SLI_REV4 && + (!(vport->load_flag & FC_UNLOADING)) && + (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) >= + LPFC_SLI_INTF_IF_TYPE_2) && + (kref_read(&ndlp->kref) > 0)) { + mbox->mbox_cmpl = lpfc_sli4_unreg_rpi_cmpl_clr; + } else { + if (vport->load_flag & FC_UNLOADING) { + if (phba->sli_rev == LPFC_SLI_REV4) { + spin_lock_irqsave(&ndlp->lock, iflags); + ndlp->nlp_flag |= NLP_RELEASE_RPI; + spin_unlock_irqrestore(&ndlp->lock, iflags); + } + } + mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl; + } +} + +/* + * Free rpi associated with LPFC_NODELIST entry. + * This routine is called from lpfc_freenode(), when we are removing + * a LPFC_NODELIST entry. It is also called if the driver initiates a + * LOGO that completes successfully, and we are waiting to PLOGI back + * to the remote NPort. In addition, it is called after we receive + * and unsolicated ELS cmd, send back a rsp, the rsp completes and + * we are waiting to PLOGI back to the remote NPort. + */ +int +lpfc_unreg_rpi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) +{ + struct lpfc_hba *phba = vport->phba; + LPFC_MBOXQ_t *mbox; + int rc, acc_plogi = 1; + uint16_t rpi; + + if (ndlp->nlp_flag & NLP_RPI_REGISTERED || + ndlp->nlp_flag & NLP_REG_LOGIN_SEND) { + if (ndlp->nlp_flag & NLP_REG_LOGIN_SEND) + lpfc_printf_vlog(vport, KERN_INFO, + LOG_NODE | LOG_DISCOVERY, + "3366 RPI x%x needs to be " + "unregistered nlp_flag x%x " + "did x%x\n", + ndlp->nlp_rpi, ndlp->nlp_flag, + ndlp->nlp_DID); + + /* If there is already an UNREG in progress for this ndlp, + * no need to queue up another one. + */ + if (ndlp->nlp_flag & NLP_UNREG_INP) { + lpfc_printf_vlog(vport, KERN_INFO, + LOG_NODE | LOG_DISCOVERY, + "1436 unreg_rpi SKIP UNREG x%x on " + "NPort x%x deferred x%x flg x%x " + "Data: x%px\n", + ndlp->nlp_rpi, ndlp->nlp_DID, + ndlp->nlp_defer_did, + ndlp->nlp_flag, ndlp); + goto out; + } + + mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + if (mbox) { + /* SLI4 ports require the physical rpi value. */ + rpi = ndlp->nlp_rpi; + if (phba->sli_rev == LPFC_SLI_REV4) + rpi = phba->sli4_hba.rpi_ids[ndlp->nlp_rpi]; + + lpfc_unreg_login(phba, vport->vpi, rpi, mbox); + mbox->vport = vport; + lpfc_set_unreg_login_mbx_cmpl(phba, vport, ndlp, mbox); + if (!mbox->ctx_ndlp) { + mempool_free(mbox, phba->mbox_mem_pool); + return 1; + } + + if (mbox->mbox_cmpl == lpfc_sli4_unreg_rpi_cmpl_clr) + /* + * accept PLOGIs after unreg_rpi_cmpl + */ + acc_plogi = 0; + if (((ndlp->nlp_DID & Fabric_DID_MASK) != + Fabric_DID_MASK) && + (!(vport->fc_flag & FC_OFFLINE_MODE))) + ndlp->nlp_flag |= NLP_UNREG_INP; + + lpfc_printf_vlog(vport, KERN_INFO, + LOG_NODE | LOG_DISCOVERY, + "1433 unreg_rpi UNREG x%x on " + "NPort x%x deferred flg x%x " + "Data:x%px\n", + ndlp->nlp_rpi, ndlp->nlp_DID, + ndlp->nlp_flag, ndlp); + + rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT); + if (rc == MBX_NOT_FINISHED) { + ndlp->nlp_flag &= ~NLP_UNREG_INP; + mempool_free(mbox, phba->mbox_mem_pool); + acc_plogi = 1; + lpfc_nlp_put(ndlp); + } + } else { + lpfc_printf_vlog(vport, KERN_INFO, + LOG_NODE | LOG_DISCOVERY, + "1444 Failed to allocate mempool " + "unreg_rpi UNREG x%x, " + "DID x%x, flag x%x, " + "ndlp x%px\n", + ndlp->nlp_rpi, ndlp->nlp_DID, + ndlp->nlp_flag, ndlp); + + /* Because mempool_alloc failed, we + * will issue a LOGO here and keep the rpi alive if + * not unloading. + */ + if (!(vport->load_flag & FC_UNLOADING)) { + ndlp->nlp_flag &= ~NLP_UNREG_INP; + lpfc_issue_els_logo(vport, ndlp, 0); + ndlp->nlp_prev_state = ndlp->nlp_state; + lpfc_nlp_set_state(vport, ndlp, + NLP_STE_NPR_NODE); + } + + return 1; + } + lpfc_no_rpi(phba, ndlp); +out: + if (phba->sli_rev != LPFC_SLI_REV4) + ndlp->nlp_rpi = 0; + ndlp->nlp_flag &= ~NLP_RPI_REGISTERED; + ndlp->nlp_flag &= ~NLP_NPR_ADISC; + if (acc_plogi) + ndlp->nlp_flag &= ~NLP_LOGO_ACC; + return 1; + } + ndlp->nlp_flag &= ~NLP_LOGO_ACC; + return 0; +} + +/** + * lpfc_unreg_hba_rpis - Unregister rpis registered to the hba. + * @phba: pointer to lpfc hba data structure. + * + * This routine is invoked to unregister all the currently registered RPIs + * to the HBA. + **/ +void +lpfc_unreg_hba_rpis(struct lpfc_hba *phba) +{ + struct lpfc_vport **vports; + struct lpfc_nodelist *ndlp; + struct Scsi_Host *shost; + int i; + + vports = lpfc_create_vport_work_array(phba); + if (!vports) { + lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, + "2884 Vport array allocation failed \n"); + return; + } + for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) { + shost = lpfc_shost_from_vport(vports[i]); + spin_lock_irq(shost->host_lock); + list_for_each_entry(ndlp, &vports[i]->fc_nodes, nlp_listp) { + if (ndlp->nlp_flag & NLP_RPI_REGISTERED) { + /* The mempool_alloc might sleep */ + spin_unlock_irq(shost->host_lock); + lpfc_unreg_rpi(vports[i], ndlp); + spin_lock_irq(shost->host_lock); + } + } + spin_unlock_irq(shost->host_lock); + } + lpfc_destroy_vport_work_array(phba, vports); +} + +void +lpfc_unreg_all_rpis(struct lpfc_vport *vport) +{ + struct lpfc_hba *phba = vport->phba; + LPFC_MBOXQ_t *mbox; + int rc; + + if (phba->sli_rev == LPFC_SLI_REV4) { + lpfc_sli4_unreg_all_rpis(vport); + return; + } + + mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + if (mbox) { + lpfc_unreg_login(phba, vport->vpi, LPFC_UNREG_ALL_RPIS_VPORT, + mbox); + mbox->vport = vport; + mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl; + mbox->ctx_ndlp = NULL; + rc = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO); + if (rc != MBX_TIMEOUT) + mempool_free(mbox, phba->mbox_mem_pool); + + if ((rc == MBX_TIMEOUT) || (rc == MBX_NOT_FINISHED)) + lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, + "1836 Could not issue " + "unreg_login(all_rpis) status %d\n", + rc); + } +} + +void +lpfc_unreg_default_rpis(struct lpfc_vport *vport) +{ + struct lpfc_hba *phba = vport->phba; + LPFC_MBOXQ_t *mbox; + int rc; + + /* Unreg DID is an SLI3 operation. */ + if (phba->sli_rev > LPFC_SLI_REV3) + return; + + mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + if (mbox) { + lpfc_unreg_did(phba, vport->vpi, LPFC_UNREG_ALL_DFLT_RPIS, + mbox); + mbox->vport = vport; + mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl; + mbox->ctx_ndlp = NULL; + rc = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO); + if (rc != MBX_TIMEOUT) + mempool_free(mbox, phba->mbox_mem_pool); + + if ((rc == MBX_TIMEOUT) || (rc == MBX_NOT_FINISHED)) + lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, + "1815 Could not issue " + "unreg_did (default rpis) status %d\n", + rc); + } +} + +/* + * Free resources associated with LPFC_NODELIST entry + * so it can be freed. + */ +static int +lpfc_cleanup_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) +{ + struct lpfc_hba *phba = vport->phba; + LPFC_MBOXQ_t *mb, *nextmb; + + /* Cleanup node for NPort <nlp_DID> */ + lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE, + "0900 Cleanup node for NPort x%x " + "Data: x%x x%x x%x\n", + ndlp->nlp_DID, ndlp->nlp_flag, + ndlp->nlp_state, ndlp->nlp_rpi); + lpfc_dequeue_node(vport, ndlp); + + /* Don't need to clean up REG_LOGIN64 cmds for Default RPI cleanup */ + + /* cleanup any ndlp on mbox q waiting for reglogin cmpl */ + if ((mb = phba->sli.mbox_active)) { + if ((mb->u.mb.mbxCommand == MBX_REG_LOGIN64) && + !(mb->mbox_flag & LPFC_MBX_IMED_UNREG) && + (ndlp == (struct lpfc_nodelist *)mb->ctx_ndlp)) { + mb->ctx_ndlp = NULL; + mb->mbox_cmpl = lpfc_sli_def_mbox_cmpl; + } + } + + spin_lock_irq(&phba->hbalock); + /* Cleanup REG_LOGIN completions which are not yet processed */ + list_for_each_entry(mb, &phba->sli.mboxq_cmpl, list) { + if ((mb->u.mb.mbxCommand != MBX_REG_LOGIN64) || + (mb->mbox_flag & LPFC_MBX_IMED_UNREG) || + (ndlp != (struct lpfc_nodelist *)mb->ctx_ndlp)) + continue; + + mb->ctx_ndlp = NULL; + mb->mbox_cmpl = lpfc_sli_def_mbox_cmpl; + } + + list_for_each_entry_safe(mb, nextmb, &phba->sli.mboxq, list) { + if ((mb->u.mb.mbxCommand == MBX_REG_LOGIN64) && + !(mb->mbox_flag & LPFC_MBX_IMED_UNREG) && + (ndlp == (struct lpfc_nodelist *)mb->ctx_ndlp)) { + list_del(&mb->list); + lpfc_mbox_rsrc_cleanup(phba, mb, MBOX_THD_LOCKED); + + /* Don't invoke lpfc_nlp_put. The driver is in + * lpfc_nlp_release context. + */ + } + } + spin_unlock_irq(&phba->hbalock); + + lpfc_els_abort(phba, ndlp); + + spin_lock_irq(&ndlp->lock); + ndlp->nlp_flag &= ~NLP_DELAY_TMO; + spin_unlock_irq(&ndlp->lock); + + ndlp->nlp_last_elscmd = 0; + del_timer_sync(&ndlp->nlp_delayfunc); + + list_del_init(&ndlp->els_retry_evt.evt_listp); + list_del_init(&ndlp->dev_loss_evt.evt_listp); + list_del_init(&ndlp->recovery_evt.evt_listp); + lpfc_cleanup_vports_rrqs(vport, ndlp); + + if (phba->sli_rev == LPFC_SLI_REV4) + ndlp->nlp_flag |= NLP_RELEASE_RPI; + + return 0; +} + +static int +lpfc_matchdid(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, + uint32_t did) +{ + D_ID mydid, ndlpdid, matchdid; + + if (did == Bcast_DID) + return 0; + + /* First check for Direct match */ + if (ndlp->nlp_DID == did) + return 1; + + /* Next check for area/domain identically equals 0 match */ + mydid.un.word = vport->fc_myDID; + if ((mydid.un.b.domain == 0) && (mydid.un.b.area == 0)) { + return 0; + } + + matchdid.un.word = did; + ndlpdid.un.word = ndlp->nlp_DID; + if (matchdid.un.b.id == ndlpdid.un.b.id) { + if ((mydid.un.b.domain == matchdid.un.b.domain) && + (mydid.un.b.area == matchdid.un.b.area)) { + /* This code is supposed to match the ID + * for a private loop device that is + * connect to fl_port. But we need to + * check that the port did not just go + * from pt2pt to fabric or we could end + * up matching ndlp->nlp_DID 000001 to + * fabric DID 0x20101 + */ + if ((ndlpdid.un.b.domain == 0) && + (ndlpdid.un.b.area == 0)) { + if (ndlpdid.un.b.id && + vport->phba->fc_topology == + LPFC_TOPOLOGY_LOOP) + return 1; + } + return 0; + } + + matchdid.un.word = ndlp->nlp_DID; + if ((mydid.un.b.domain == ndlpdid.un.b.domain) && + (mydid.un.b.area == ndlpdid.un.b.area)) { + if ((matchdid.un.b.domain == 0) && + (matchdid.un.b.area == 0)) { + if (matchdid.un.b.id) + return 1; + } + } + } + return 0; +} + +/* Search for a nodelist entry */ +static struct lpfc_nodelist * +__lpfc_findnode_did(struct lpfc_vport *vport, uint32_t did) +{ + struct lpfc_nodelist *ndlp; + uint32_t data1; + + list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) { + if (lpfc_matchdid(vport, ndlp, did)) { + data1 = (((uint32_t)ndlp->nlp_state << 24) | + ((uint32_t)ndlp->nlp_xri << 16) | + ((uint32_t)ndlp->nlp_type << 8) + ); + lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE, + "0929 FIND node DID " + "Data: x%px x%x x%x x%x x%x x%px\n", + ndlp, ndlp->nlp_DID, + ndlp->nlp_flag, data1, ndlp->nlp_rpi, + ndlp->active_rrqs_xri_bitmap); + return ndlp; + } + } + + /* FIND node did <did> NOT FOUND */ + lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE, + "0932 FIND node did x%x NOT FOUND.\n", did); + return NULL; +} + +struct lpfc_nodelist * +lpfc_findnode_did(struct lpfc_vport *vport, uint32_t did) +{ + struct Scsi_Host *shost = lpfc_shost_from_vport(vport); + struct lpfc_nodelist *ndlp; + unsigned long iflags; + + spin_lock_irqsave(shost->host_lock, iflags); + ndlp = __lpfc_findnode_did(vport, did); + spin_unlock_irqrestore(shost->host_lock, iflags); + return ndlp; +} + +struct lpfc_nodelist * +lpfc_findnode_mapped(struct lpfc_vport *vport) +{ + struct Scsi_Host *shost = lpfc_shost_from_vport(vport); + struct lpfc_nodelist *ndlp; + uint32_t data1; + unsigned long iflags; + + spin_lock_irqsave(shost->host_lock, iflags); + + list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) { + if (ndlp->nlp_state == NLP_STE_UNMAPPED_NODE || + ndlp->nlp_state == NLP_STE_MAPPED_NODE) { + data1 = (((uint32_t)ndlp->nlp_state << 24) | + ((uint32_t)ndlp->nlp_xri << 16) | + ((uint32_t)ndlp->nlp_type << 8) | + ((uint32_t)ndlp->nlp_rpi & 0xff)); + spin_unlock_irqrestore(shost->host_lock, iflags); + lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE, + "2025 FIND node DID " + "Data: x%px x%x x%x x%x x%px\n", + ndlp, ndlp->nlp_DID, + ndlp->nlp_flag, data1, + ndlp->active_rrqs_xri_bitmap); + return ndlp; + } + } + spin_unlock_irqrestore(shost->host_lock, iflags); + + /* FIND node did <did> NOT FOUND */ + lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE, + "2026 FIND mapped did NOT FOUND.\n"); + return NULL; +} + +struct lpfc_nodelist * +lpfc_setup_disc_node(struct lpfc_vport *vport, uint32_t did) +{ + struct lpfc_nodelist *ndlp; + + ndlp = lpfc_findnode_did(vport, did); + if (!ndlp) { + if (vport->phba->nvmet_support) + return NULL; + if ((vport->fc_flag & FC_RSCN_MODE) != 0 && + lpfc_rscn_payload_check(vport, did) == 0) + return NULL; + ndlp = lpfc_nlp_init(vport, did); + if (!ndlp) + return NULL; + lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE); + + lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY, + "6453 Setup New Node 2B_DISC x%x " + "Data:x%x x%x x%x\n", + ndlp->nlp_DID, ndlp->nlp_flag, + ndlp->nlp_state, vport->fc_flag); + + spin_lock_irq(&ndlp->lock); + ndlp->nlp_flag |= NLP_NPR_2B_DISC; + spin_unlock_irq(&ndlp->lock); + return ndlp; + } + + /* The NVME Target does not want to actively manage an rport. + * The goal is to allow the target to reset its state and clear + * pending IO in preparation for the initiator to recover. + */ + if ((vport->fc_flag & FC_RSCN_MODE) && + !(vport->fc_flag & FC_NDISC_ACTIVE)) { + if (lpfc_rscn_payload_check(vport, did)) { + + /* Since this node is marked for discovery, + * delay timeout is not needed. + */ + lpfc_cancel_retry_delay_tmo(vport, ndlp); + + lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY, + "6455 Setup RSCN Node 2B_DISC x%x " + "Data:x%x x%x x%x\n", + ndlp->nlp_DID, ndlp->nlp_flag, + ndlp->nlp_state, vport->fc_flag); + + /* NVME Target mode waits until rport is known to be + * impacted by the RSCN before it transitions. No + * active management - just go to NPR provided the + * node had a valid login. + */ + if (vport->phba->nvmet_support) + return ndlp; + + /* If we've already received a PLOGI from this NPort + * we don't need to try to discover it again. + */ + if (ndlp->nlp_flag & NLP_RCV_PLOGI && + !(ndlp->nlp_type & + (NLP_FCP_TARGET | NLP_NVME_TARGET))) + return NULL; + + ndlp->nlp_prev_state = ndlp->nlp_state; + lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE); + + spin_lock_irq(&ndlp->lock); + ndlp->nlp_flag |= NLP_NPR_2B_DISC; + spin_unlock_irq(&ndlp->lock); + } else { + lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY, + "6456 Skip Setup RSCN Node x%x " + "Data:x%x x%x x%x\n", + ndlp->nlp_DID, ndlp->nlp_flag, + ndlp->nlp_state, vport->fc_flag); + ndlp = NULL; + } + } else { + lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY, + "6457 Setup Active Node 2B_DISC x%x " + "Data:x%x x%x x%x\n", + ndlp->nlp_DID, ndlp->nlp_flag, + ndlp->nlp_state, vport->fc_flag); + + /* If the initiator received a PLOGI from this NPort or if the + * initiator is already in the process of discovery on it, + * there's no need to try to discover it again. + */ + if (ndlp->nlp_state == NLP_STE_ADISC_ISSUE || + ndlp->nlp_state == NLP_STE_PLOGI_ISSUE || + (!vport->phba->nvmet_support && + ndlp->nlp_flag & NLP_RCV_PLOGI)) + return NULL; + + if (vport->phba->nvmet_support) + return ndlp; + + /* Moving to NPR state clears unsolicited flags and + * allows for rediscovery + */ + lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE); + + spin_lock_irq(&ndlp->lock); + ndlp->nlp_flag |= NLP_NPR_2B_DISC; + spin_unlock_irq(&ndlp->lock); + } + return ndlp; +} + +/* Build a list of nodes to discover based on the loopmap */ +void +lpfc_disc_list_loopmap(struct lpfc_vport *vport) +{ + struct lpfc_hba *phba = vport->phba; + int j; + uint32_t alpa, index; + + if (!lpfc_is_link_up(phba)) + return; + + if (phba->fc_topology != LPFC_TOPOLOGY_LOOP) + return; + + /* Check for loop map present or not */ + if (phba->alpa_map[0]) { + for (j = 1; j <= phba->alpa_map[0]; j++) { + alpa = phba->alpa_map[j]; + if (((vport->fc_myDID & 0xff) == alpa) || (alpa == 0)) + continue; + lpfc_setup_disc_node(vport, alpa); + } + } else { + /* No alpamap, so try all alpa's */ + for (j = 0; j < FC_MAXLOOP; j++) { + /* If cfg_scan_down is set, start from highest + * ALPA (0xef) to lowest (0x1). + */ + if (vport->cfg_scan_down) + index = j; + else + index = FC_MAXLOOP - j - 1; + alpa = lpfcAlpaArray[index]; + if ((vport->fc_myDID & 0xff) == alpa) + continue; + lpfc_setup_disc_node(vport, alpa); + } + } + return; +} + +/* SLI3 only */ +void +lpfc_issue_clear_la(struct lpfc_hba *phba, struct lpfc_vport *vport) +{ + LPFC_MBOXQ_t *mbox; + struct lpfc_sli *psli = &phba->sli; + struct lpfc_sli_ring *extra_ring = &psli->sli3_ring[LPFC_EXTRA_RING]; + struct lpfc_sli_ring *fcp_ring = &psli->sli3_ring[LPFC_FCP_RING]; + int rc; + + /* + * if it's not a physical port or if we already send + * clear_la then don't send it. + */ + if ((phba->link_state >= LPFC_CLEAR_LA) || + (vport->port_type != LPFC_PHYSICAL_PORT) || + (phba->sli_rev == LPFC_SLI_REV4)) + return; + + /* Link up discovery */ + if ((mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL)) != NULL) { + phba->link_state = LPFC_CLEAR_LA; + lpfc_clear_la(phba, mbox); + mbox->mbox_cmpl = lpfc_mbx_cmpl_clear_la; + mbox->vport = vport; + rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT); + if (rc == MBX_NOT_FINISHED) { + mempool_free(mbox, phba->mbox_mem_pool); + lpfc_disc_flush_list(vport); + extra_ring->flag &= ~LPFC_STOP_IOCB_EVENT; + fcp_ring->flag &= ~LPFC_STOP_IOCB_EVENT; + phba->link_state = LPFC_HBA_ERROR; + } + } +} + +/* Reg_vpi to tell firmware to resume normal operations */ +void +lpfc_issue_reg_vpi(struct lpfc_hba *phba, struct lpfc_vport *vport) +{ + LPFC_MBOXQ_t *regvpimbox; + + regvpimbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + if (regvpimbox) { + lpfc_reg_vpi(vport, regvpimbox); + regvpimbox->mbox_cmpl = lpfc_mbx_cmpl_reg_vpi; + regvpimbox->vport = vport; + if (lpfc_sli_issue_mbox(phba, regvpimbox, MBX_NOWAIT) + == MBX_NOT_FINISHED) { + mempool_free(regvpimbox, phba->mbox_mem_pool); + } + } +} + +/* Start Link up / RSCN discovery on NPR nodes */ +void +lpfc_disc_start(struct lpfc_vport *vport) +{ + struct Scsi_Host *shost = lpfc_shost_from_vport(vport); + struct lpfc_hba *phba = vport->phba; + uint32_t num_sent; + uint32_t clear_la_pending; + + if (!lpfc_is_link_up(phba)) { + lpfc_printf_vlog(vport, KERN_INFO, LOG_SLI, + "3315 Link is not up %x\n", + phba->link_state); + return; + } + + if (phba->link_state == LPFC_CLEAR_LA) + clear_la_pending = 1; + else + clear_la_pending = 0; + + if (vport->port_state < LPFC_VPORT_READY) + vport->port_state = LPFC_DISC_AUTH; + + lpfc_set_disctmo(vport); + + vport->fc_prevDID = vport->fc_myDID; + vport->num_disc_nodes = 0; + + /* Start Discovery state <hba_state> */ + lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY, + "0202 Start Discovery port state x%x " + "flg x%x Data: x%x x%x x%x\n", + vport->port_state, vport->fc_flag, vport->fc_plogi_cnt, + vport->fc_adisc_cnt, vport->fc_npr_cnt); + + /* First do ADISCs - if any */ + num_sent = lpfc_els_disc_adisc(vport); + + if (num_sent) + return; + + /* Register the VPI for SLI3, NPIV only. */ + if ((phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) && + !(vport->fc_flag & FC_PT2PT) && + !(vport->fc_flag & FC_RSCN_MODE) && + (phba->sli_rev < LPFC_SLI_REV4)) { + lpfc_issue_clear_la(phba, vport); + lpfc_issue_reg_vpi(phba, vport); + return; + } + + /* + * For SLI2, we need to set port_state to READY and continue + * discovery. + */ + if (vport->port_state < LPFC_VPORT_READY && !clear_la_pending) { + /* If we get here, there is nothing to ADISC */ + lpfc_issue_clear_la(phba, vport); + + if (!(vport->fc_flag & FC_ABORT_DISCOVERY)) { + vport->num_disc_nodes = 0; + /* go thru NPR nodes and issue ELS PLOGIs */ + if (vport->fc_npr_cnt) + lpfc_els_disc_plogi(vport); + + if (!vport->num_disc_nodes) { + spin_lock_irq(shost->host_lock); + vport->fc_flag &= ~FC_NDISC_ACTIVE; + spin_unlock_irq(shost->host_lock); + lpfc_can_disctmo(vport); + } + } + vport->port_state = LPFC_VPORT_READY; + } else { + /* Next do PLOGIs - if any */ + num_sent = lpfc_els_disc_plogi(vport); + + if (num_sent) + return; + + if (vport->fc_flag & FC_RSCN_MODE) { + /* Check to see if more RSCNs came in while we + * were processing this one. + */ + if ((vport->fc_rscn_id_cnt == 0) && + (!(vport->fc_flag & FC_RSCN_DISCOVERY))) { + spin_lock_irq(shost->host_lock); + vport->fc_flag &= ~FC_RSCN_MODE; + spin_unlock_irq(shost->host_lock); + lpfc_can_disctmo(vport); + } else + lpfc_els_handle_rscn(vport); + } + } + return; +} + +/* + * Ignore completion for all IOCBs on tx and txcmpl queue for ELS + * ring the match the sppecified nodelist. + */ +static void +lpfc_free_tx(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp) +{ + LIST_HEAD(completions); + struct lpfc_iocbq *iocb, *next_iocb; + struct lpfc_sli_ring *pring; + u32 ulp_command; + + pring = lpfc_phba_elsring(phba); + if (unlikely(!pring)) + return; + + /* Error matching iocb on txq or txcmplq + * First check the txq. + */ + spin_lock_irq(&phba->hbalock); + list_for_each_entry_safe(iocb, next_iocb, &pring->txq, list) { + if (iocb->ndlp != ndlp) + continue; + + ulp_command = get_job_cmnd(phba, iocb); + + if (ulp_command == CMD_ELS_REQUEST64_CR || + ulp_command == CMD_XMIT_ELS_RSP64_CX) { + + list_move_tail(&iocb->list, &completions); + } + } + + /* Next check the txcmplq */ + list_for_each_entry_safe(iocb, next_iocb, &pring->txcmplq, list) { + if (iocb->ndlp != ndlp) + continue; + + ulp_command = get_job_cmnd(phba, iocb); + + if (ulp_command == CMD_ELS_REQUEST64_CR || + ulp_command == CMD_XMIT_ELS_RSP64_CX) { + lpfc_sli_issue_abort_iotag(phba, pring, iocb, NULL); + } + } + spin_unlock_irq(&phba->hbalock); + + /* Make sure HBA is alive */ + lpfc_issue_hb_tmo(phba); + + /* Cancel all the IOCBs from the completions list */ + lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, + IOERR_SLI_ABORTED); +} + +static void +lpfc_disc_flush_list(struct lpfc_vport *vport) +{ + struct lpfc_nodelist *ndlp, *next_ndlp; + struct lpfc_hba *phba = vport->phba; + + if (vport->fc_plogi_cnt || vport->fc_adisc_cnt) { + list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, + nlp_listp) { + if (ndlp->nlp_state == NLP_STE_PLOGI_ISSUE || + ndlp->nlp_state == NLP_STE_ADISC_ISSUE) { + lpfc_free_tx(phba, ndlp); + } + } + } +} + +/* + * lpfc_notify_xport_npr - notifies xport of node disappearance + * @vport: Pointer to Virtual Port object. + * + * Transitions all ndlps to NPR state. When lpfc_nlp_set_state + * calls lpfc_nlp_state_cleanup, the ndlp->rport is unregistered + * and transport notified that the node is gone. + * Return Code: + * none + */ +static void +lpfc_notify_xport_npr(struct lpfc_vport *vport) +{ + struct lpfc_nodelist *ndlp, *next_ndlp; + + list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, + nlp_listp) { + lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE); + } +} +void +lpfc_cleanup_discovery_resources(struct lpfc_vport *vport) +{ + lpfc_els_flush_rscn(vport); + lpfc_els_flush_cmd(vport); + lpfc_disc_flush_list(vport); + if (pci_channel_offline(vport->phba->pcidev)) + lpfc_notify_xport_npr(vport); +} + +/*****************************************************************************/ +/* + * NAME: lpfc_disc_timeout + * + * FUNCTION: Fibre Channel driver discovery timeout routine. + * + * EXECUTION ENVIRONMENT: interrupt only + * + * CALLED FROM: + * Timer function + * + * RETURNS: + * none + */ +/*****************************************************************************/ +void +lpfc_disc_timeout(struct timer_list *t) +{ + struct lpfc_vport *vport = from_timer(vport, t, fc_disctmo); + struct lpfc_hba *phba = vport->phba; + uint32_t tmo_posted; + unsigned long flags = 0; + + if (unlikely(!phba)) + return; + + spin_lock_irqsave(&vport->work_port_lock, flags); + tmo_posted = vport->work_port_events & WORKER_DISC_TMO; + if (!tmo_posted) + vport->work_port_events |= WORKER_DISC_TMO; + spin_unlock_irqrestore(&vport->work_port_lock, flags); + + if (!tmo_posted) + lpfc_worker_wake_up(phba); + return; +} + +static void +lpfc_disc_timeout_handler(struct lpfc_vport *vport) +{ + struct Scsi_Host *shost = lpfc_shost_from_vport(vport); + struct lpfc_hba *phba = vport->phba; + struct lpfc_sli *psli = &phba->sli; + struct lpfc_nodelist *ndlp, *next_ndlp; + LPFC_MBOXQ_t *initlinkmbox; + int rc, clrlaerr = 0; + + if (!(vport->fc_flag & FC_DISC_TMO)) + return; + + spin_lock_irq(shost->host_lock); + vport->fc_flag &= ~FC_DISC_TMO; + spin_unlock_irq(shost->host_lock); + + lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD, + "disc timeout: state:x%x rtry:x%x flg:x%x", + vport->port_state, vport->fc_ns_retry, vport->fc_flag); + + switch (vport->port_state) { + + case LPFC_LOCAL_CFG_LINK: + /* + * port_state is identically LPFC_LOCAL_CFG_LINK while + * waiting for FAN timeout + */ + lpfc_printf_vlog(vport, KERN_WARNING, LOG_DISCOVERY, + "0221 FAN timeout\n"); + + /* Start discovery by sending FLOGI, clean up old rpis */ + list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, + nlp_listp) { + if (ndlp->nlp_state != NLP_STE_NPR_NODE) + continue; + if (ndlp->nlp_type & NLP_FABRIC) { + /* Clean up the ndlp on Fabric connections */ + lpfc_drop_node(vport, ndlp); + + } else if (!(ndlp->nlp_flag & NLP_NPR_ADISC)) { + /* Fail outstanding IO now since device + * is marked for PLOGI. + */ + lpfc_unreg_rpi(vport, ndlp); + } + } + if (vport->port_state != LPFC_FLOGI) { + if (phba->sli_rev <= LPFC_SLI_REV3) + lpfc_initial_flogi(vport); + else + lpfc_issue_init_vfi(vport); + return; + } + break; + + case LPFC_FDISC: + case LPFC_FLOGI: + /* port_state is identically LPFC_FLOGI while waiting for FLOGI cmpl */ + /* Initial FLOGI timeout */ + lpfc_printf_vlog(vport, KERN_ERR, + LOG_TRACE_EVENT, + "0222 Initial %s timeout\n", + vport->vpi ? "FDISC" : "FLOGI"); + + /* Assume no Fabric and go on with discovery. + * Check for outstanding ELS FLOGI to abort. + */ + + /* FLOGI failed, so just use loop map to make discovery list */ + lpfc_disc_list_loopmap(vport); + + /* Start discovery */ + lpfc_disc_start(vport); + break; + + case LPFC_FABRIC_CFG_LINK: + /* hba_state is identically LPFC_FABRIC_CFG_LINK while waiting for + NameServer login */ + lpfc_printf_vlog(vport, KERN_ERR, + LOG_TRACE_EVENT, + "0223 Timeout while waiting for " + "NameServer login\n"); + /* Next look for NameServer ndlp */ + ndlp = lpfc_findnode_did(vport, NameServer_DID); + if (ndlp) + lpfc_els_abort(phba, ndlp); + + /* ReStart discovery */ + goto restart_disc; + + case LPFC_NS_QRY: + /* Check for wait for NameServer Rsp timeout */ + lpfc_printf_vlog(vport, KERN_ERR, + LOG_TRACE_EVENT, + "0224 NameServer Query timeout " + "Data: x%x x%x\n", + vport->fc_ns_retry, LPFC_MAX_NS_RETRY); + + if (vport->fc_ns_retry < LPFC_MAX_NS_RETRY) { + /* Try it one more time */ + vport->fc_ns_retry++; + vport->gidft_inp = 0; + rc = lpfc_issue_gidft(vport); + if (rc == 0) + break; + } + vport->fc_ns_retry = 0; + +restart_disc: + /* + * Discovery is over. + * set port_state to PORT_READY if SLI2. + * cmpl_reg_vpi will set port_state to READY for SLI3. + */ + if (phba->sli_rev < LPFC_SLI_REV4) { + if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) + lpfc_issue_reg_vpi(phba, vport); + else { + lpfc_issue_clear_la(phba, vport); + vport->port_state = LPFC_VPORT_READY; + } + } + + /* Setup and issue mailbox INITIALIZE LINK command */ + initlinkmbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + if (!initlinkmbox) { + lpfc_printf_vlog(vport, KERN_ERR, + LOG_TRACE_EVENT, + "0206 Device Discovery " + "completion error\n"); + phba->link_state = LPFC_HBA_ERROR; + break; + } + + lpfc_linkdown(phba); + lpfc_init_link(phba, initlinkmbox, phba->cfg_topology, + phba->cfg_link_speed); + initlinkmbox->u.mb.un.varInitLnk.lipsr_AL_PA = 0; + initlinkmbox->vport = vport; + initlinkmbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl; + rc = lpfc_sli_issue_mbox(phba, initlinkmbox, MBX_NOWAIT); + lpfc_set_loopback_flag(phba); + if (rc == MBX_NOT_FINISHED) + mempool_free(initlinkmbox, phba->mbox_mem_pool); + + break; + + case LPFC_DISC_AUTH: + /* Node Authentication timeout */ + lpfc_printf_vlog(vport, KERN_ERR, + LOG_TRACE_EVENT, + "0227 Node Authentication timeout\n"); + lpfc_disc_flush_list(vport); + + /* + * set port_state to PORT_READY if SLI2. + * cmpl_reg_vpi will set port_state to READY for SLI3. + */ + if (phba->sli_rev < LPFC_SLI_REV4) { + if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) + lpfc_issue_reg_vpi(phba, vport); + else { /* NPIV Not enabled */ + lpfc_issue_clear_la(phba, vport); + vport->port_state = LPFC_VPORT_READY; + } + } + break; + + case LPFC_VPORT_READY: + if (vport->fc_flag & FC_RSCN_MODE) { + lpfc_printf_vlog(vport, KERN_ERR, + LOG_TRACE_EVENT, + "0231 RSCN timeout Data: x%x " + "x%x x%x x%x\n", + vport->fc_ns_retry, LPFC_MAX_NS_RETRY, + vport->port_state, vport->gidft_inp); + + /* Cleanup any outstanding ELS commands */ + lpfc_els_flush_cmd(vport); + + lpfc_els_flush_rscn(vport); + lpfc_disc_flush_list(vport); + } + break; + + default: + lpfc_printf_vlog(vport, KERN_ERR, + LOG_TRACE_EVENT, + "0273 Unexpected discovery timeout, " + "vport State x%x\n", vport->port_state); + break; + } + + switch (phba->link_state) { + case LPFC_CLEAR_LA: + /* CLEAR LA timeout */ + lpfc_printf_vlog(vport, KERN_ERR, + LOG_TRACE_EVENT, + "0228 CLEAR LA timeout\n"); + clrlaerr = 1; + break; + + case LPFC_LINK_UP: + lpfc_issue_clear_la(phba, vport); + fallthrough; + case LPFC_LINK_UNKNOWN: + case LPFC_WARM_START: + case LPFC_INIT_START: + case LPFC_INIT_MBX_CMDS: + case LPFC_LINK_DOWN: + case LPFC_HBA_ERROR: + lpfc_printf_vlog(vport, KERN_ERR, + LOG_TRACE_EVENT, + "0230 Unexpected timeout, hba link " + "state x%x\n", phba->link_state); + clrlaerr = 1; + break; + + case LPFC_HBA_READY: + break; + } + + if (clrlaerr) { + lpfc_disc_flush_list(vport); + if (phba->sli_rev != LPFC_SLI_REV4) { + psli->sli3_ring[(LPFC_EXTRA_RING)].flag &= + ~LPFC_STOP_IOCB_EVENT; + psli->sli3_ring[LPFC_FCP_RING].flag &= + ~LPFC_STOP_IOCB_EVENT; + } + vport->port_state = LPFC_VPORT_READY; + } + return; +} + +/* + * This routine handles processing a NameServer REG_LOGIN mailbox + * command upon completion. It is setup in the LPFC_MBOXQ + * as the completion routine when the command is + * handed off to the SLI layer. + */ +void +lpfc_mbx_cmpl_fdmi_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) +{ + MAILBOX_t *mb = &pmb->u.mb; + struct lpfc_nodelist *ndlp = (struct lpfc_nodelist *)pmb->ctx_ndlp; + struct lpfc_vport *vport = pmb->vport; + + pmb->ctx_ndlp = NULL; + + if (phba->sli_rev < LPFC_SLI_REV4) + ndlp->nlp_rpi = mb->un.varWords[0]; + ndlp->nlp_flag |= NLP_RPI_REGISTERED; + ndlp->nlp_type |= NLP_FABRIC; + lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE); + lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE | LOG_DISCOVERY, + "0004 rpi:%x DID:%x flg:%x %d x%px\n", + ndlp->nlp_rpi, ndlp->nlp_DID, ndlp->nlp_flag, + kref_read(&ndlp->kref), + ndlp); + /* + * Start issuing Fabric-Device Management Interface (FDMI) command to + * 0xfffffa (FDMI well known port). + * DHBA -> DPRT -> RHBA -> RPA (physical port) + * DPRT -> RPRT (vports) + */ + if (vport->port_type == LPFC_PHYSICAL_PORT) { + phba->link_flag &= ~LS_CT_VEN_RPA; /* For extra Vendor RPA */ + lpfc_fdmi_cmd(vport, ndlp, SLI_MGMT_DHBA, 0); + } else { + lpfc_fdmi_cmd(vport, ndlp, SLI_MGMT_DPRT, 0); + } + + + /* decrement the node reference count held for this callback + * function. + */ + lpfc_nlp_put(ndlp); + lpfc_mbox_rsrc_cleanup(phba, pmb, MBOX_THD_UNLOCKED); + return; +} + +static int +lpfc_filter_by_rpi(struct lpfc_nodelist *ndlp, void *param) +{ + uint16_t *rpi = param; + + return ndlp->nlp_rpi == *rpi; +} + +static int +lpfc_filter_by_wwpn(struct lpfc_nodelist *ndlp, void *param) +{ + return memcmp(&ndlp->nlp_portname, param, + sizeof(ndlp->nlp_portname)) == 0; +} + +static struct lpfc_nodelist * +__lpfc_find_node(struct lpfc_vport *vport, node_filter filter, void *param) +{ + struct lpfc_nodelist *ndlp; + + list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) { + if (filter(ndlp, param)) { + lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE, + "3185 FIND node filter %ps DID " + "ndlp x%px did x%x flg x%x st x%x " + "xri x%x type x%x rpi x%x\n", + filter, ndlp, ndlp->nlp_DID, + ndlp->nlp_flag, ndlp->nlp_state, + ndlp->nlp_xri, ndlp->nlp_type, + ndlp->nlp_rpi); + return ndlp; + } + } + lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE, + "3186 FIND node filter %ps NOT FOUND.\n", filter); + return NULL; +} + +/* + * This routine looks up the ndlp lists for the given RPI. If rpi found it + * returns the node list element pointer else return NULL. + */ +struct lpfc_nodelist * +__lpfc_findnode_rpi(struct lpfc_vport *vport, uint16_t rpi) +{ + return __lpfc_find_node(vport, lpfc_filter_by_rpi, &rpi); +} + +/* + * This routine looks up the ndlp lists for the given WWPN. If WWPN found it + * returns the node element list pointer else return NULL. + */ +struct lpfc_nodelist * +lpfc_findnode_wwpn(struct lpfc_vport *vport, struct lpfc_name *wwpn) +{ + struct Scsi_Host *shost = lpfc_shost_from_vport(vport); + struct lpfc_nodelist *ndlp; + + spin_lock_irq(shost->host_lock); + ndlp = __lpfc_find_node(vport, lpfc_filter_by_wwpn, wwpn); + spin_unlock_irq(shost->host_lock); + return ndlp; +} + +/* + * This routine looks up the ndlp lists for the given RPI. If the rpi + * is found, the routine returns the node element list pointer else + * return NULL. + */ +struct lpfc_nodelist * +lpfc_findnode_rpi(struct lpfc_vport *vport, uint16_t rpi) +{ + struct Scsi_Host *shost = lpfc_shost_from_vport(vport); + struct lpfc_nodelist *ndlp; + unsigned long flags; + + spin_lock_irqsave(shost->host_lock, flags); + ndlp = __lpfc_findnode_rpi(vport, rpi); + spin_unlock_irqrestore(shost->host_lock, flags); + return ndlp; +} + +/** + * lpfc_find_vport_by_vpid - Find a vport on a HBA through vport identifier + * @phba: pointer to lpfc hba data structure. + * @vpi: the physical host virtual N_Port identifier. + * + * This routine finds a vport on a HBA (referred by @phba) through a + * @vpi. The function walks the HBA's vport list and returns the address + * of the vport with the matching @vpi. + * + * Return code + * NULL - No vport with the matching @vpi found + * Otherwise - Address to the vport with the matching @vpi. + **/ +struct lpfc_vport * +lpfc_find_vport_by_vpid(struct lpfc_hba *phba, uint16_t vpi) +{ + struct lpfc_vport *vport; + unsigned long flags; + int i = 0; + + /* The physical ports are always vpi 0 - translate is unnecessary. */ + if (vpi > 0) { + /* + * Translate the physical vpi to the logical vpi. The + * vport stores the logical vpi. + */ + for (i = 0; i <= phba->max_vpi; i++) { + if (vpi == phba->vpi_ids[i]) + break; + } + + if (i > phba->max_vpi) { + lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, + "2936 Could not find Vport mapped " + "to vpi %d\n", vpi); + return NULL; + } + } + + spin_lock_irqsave(&phba->port_list_lock, flags); + list_for_each_entry(vport, &phba->port_list, listentry) { + if (vport->vpi == i) { + spin_unlock_irqrestore(&phba->port_list_lock, flags); + return vport; + } + } + spin_unlock_irqrestore(&phba->port_list_lock, flags); + return NULL; +} + +struct lpfc_nodelist * +lpfc_nlp_init(struct lpfc_vport *vport, uint32_t did) +{ + struct lpfc_nodelist *ndlp; + int rpi = LPFC_RPI_ALLOC_ERROR; + + if (vport->phba->sli_rev == LPFC_SLI_REV4) { + rpi = lpfc_sli4_alloc_rpi(vport->phba); + if (rpi == LPFC_RPI_ALLOC_ERROR) + return NULL; + } + + ndlp = mempool_alloc(vport->phba->nlp_mem_pool, GFP_KERNEL); + if (!ndlp) { + if (vport->phba->sli_rev == LPFC_SLI_REV4) + lpfc_sli4_free_rpi(vport->phba, rpi); + return NULL; + } + + memset(ndlp, 0, sizeof (struct lpfc_nodelist)); + + spin_lock_init(&ndlp->lock); + + lpfc_initialize_node(vport, ndlp, did); + INIT_LIST_HEAD(&ndlp->nlp_listp); + if (vport->phba->sli_rev == LPFC_SLI_REV4) { + ndlp->nlp_rpi = rpi; + lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE | LOG_DISCOVERY, + "0007 Init New ndlp x%px, rpi:x%x DID:%x " + "flg:x%x refcnt:%d\n", + ndlp, ndlp->nlp_rpi, ndlp->nlp_DID, + ndlp->nlp_flag, kref_read(&ndlp->kref)); + + ndlp->active_rrqs_xri_bitmap = + mempool_alloc(vport->phba->active_rrq_pool, + GFP_KERNEL); + if (ndlp->active_rrqs_xri_bitmap) + memset(ndlp->active_rrqs_xri_bitmap, 0, + ndlp->phba->cfg_rrq_xri_bitmap_sz); + } + + + + lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_NODE, + "node init: did:x%x", + ndlp->nlp_DID, 0, 0); + + return ndlp; +} + +/* This routine releases all resources associated with a specifc NPort's ndlp + * and mempool_free's the nodelist. + */ +static void +lpfc_nlp_release(struct kref *kref) +{ + struct lpfc_nodelist *ndlp = container_of(kref, struct lpfc_nodelist, + kref); + struct lpfc_vport *vport = ndlp->vport; + + lpfc_debugfs_disc_trc(ndlp->vport, LPFC_DISC_TRC_NODE, + "node release: did:x%x flg:x%x type:x%x", + ndlp->nlp_DID, ndlp->nlp_flag, ndlp->nlp_type); + + lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE, + "0279 %s: ndlp: x%px did %x refcnt:%d rpi:%x\n", + __func__, ndlp, ndlp->nlp_DID, + kref_read(&ndlp->kref), ndlp->nlp_rpi); + + /* remove ndlp from action. */ + lpfc_cancel_retry_delay_tmo(vport, ndlp); + lpfc_cleanup_node(vport, ndlp); + + /* Not all ELS transactions have registered the RPI with the port. + * In these cases the rpi usage is temporary and the node is + * released when the WQE is completed. Catch this case to free the + * RPI to the pool. Because this node is in the release path, a lock + * is unnecessary. All references are gone and the node has been + * dequeued. + */ + if (ndlp->nlp_flag & NLP_RELEASE_RPI) { + if (ndlp->nlp_rpi != LPFC_RPI_ALLOC_ERROR && + !(ndlp->nlp_flag & (NLP_RPI_REGISTERED | NLP_UNREG_INP))) { + lpfc_sli4_free_rpi(vport->phba, ndlp->nlp_rpi); + ndlp->nlp_rpi = LPFC_RPI_ALLOC_ERROR; + } + } + + /* The node is not freed back to memory, it is released to a pool so + * the node fields need to be cleaned up. + */ + ndlp->vport = NULL; + ndlp->nlp_state = NLP_STE_FREED_NODE; + ndlp->nlp_flag = 0; + ndlp->fc4_xpt_flags = 0; + + /* free ndlp memory for final ndlp release */ + if (ndlp->phba->sli_rev == LPFC_SLI_REV4) + mempool_free(ndlp->active_rrqs_xri_bitmap, + ndlp->phba->active_rrq_pool); + mempool_free(ndlp, ndlp->phba->nlp_mem_pool); +} + +/* This routine bumps the reference count for a ndlp structure to ensure + * that one discovery thread won't free a ndlp while another discovery thread + * is using it. + */ +struct lpfc_nodelist * +lpfc_nlp_get(struct lpfc_nodelist *ndlp) +{ + unsigned long flags; + + if (ndlp) { + lpfc_debugfs_disc_trc(ndlp->vport, LPFC_DISC_TRC_NODE, + "node get: did:x%x flg:x%x refcnt:x%x", + ndlp->nlp_DID, ndlp->nlp_flag, + kref_read(&ndlp->kref)); + + /* The check of ndlp usage to prevent incrementing the + * ndlp reference count that is in the process of being + * released. + */ + spin_lock_irqsave(&ndlp->lock, flags); + if (!kref_get_unless_zero(&ndlp->kref)) { + spin_unlock_irqrestore(&ndlp->lock, flags); + lpfc_printf_vlog(ndlp->vport, KERN_WARNING, LOG_NODE, + "0276 %s: ndlp:x%px refcnt:%d\n", + __func__, (void *)ndlp, kref_read(&ndlp->kref)); + return NULL; + } + spin_unlock_irqrestore(&ndlp->lock, flags); + } else { + WARN_ONCE(!ndlp, "**** %s, get ref on NULL ndlp!", __func__); + } + + return ndlp; +} + +/* This routine decrements the reference count for a ndlp structure. If the + * count goes to 0, this indicates the associated nodelist should be freed. + */ +int +lpfc_nlp_put(struct lpfc_nodelist *ndlp) +{ + if (ndlp) { + lpfc_debugfs_disc_trc(ndlp->vport, LPFC_DISC_TRC_NODE, + "node put: did:x%x flg:x%x refcnt:x%x", + ndlp->nlp_DID, ndlp->nlp_flag, + kref_read(&ndlp->kref)); + } else { + WARN_ONCE(!ndlp, "**** %s, put ref on NULL ndlp!", __func__); + } + + return ndlp ? kref_put(&ndlp->kref, lpfc_nlp_release) : 0; +} + +/** + * lpfc_fcf_inuse - Check if FCF can be unregistered. + * @phba: Pointer to hba context object. + * + * This function iterate through all FC nodes associated + * will all vports to check if there is any node with + * fc_rports associated with it. If there is an fc_rport + * associated with the node, then the node is either in + * discovered state or its devloss_timer is pending. + */ +static int +lpfc_fcf_inuse(struct lpfc_hba *phba) +{ + struct lpfc_vport **vports; + int i, ret = 0; + struct lpfc_nodelist *ndlp; + struct Scsi_Host *shost; + + vports = lpfc_create_vport_work_array(phba); + + /* If driver cannot allocate memory, indicate fcf is in use */ + if (!vports) + return 1; + + for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) { + shost = lpfc_shost_from_vport(vports[i]); + spin_lock_irq(shost->host_lock); + /* + * IF the CVL_RCVD bit is not set then we have sent the + * flogi. + * If dev_loss fires while we are waiting we do not want to + * unreg the fcf. + */ + if (!(vports[i]->fc_flag & FC_VPORT_CVL_RCVD)) { + spin_unlock_irq(shost->host_lock); + ret = 1; + goto out; + } + list_for_each_entry(ndlp, &vports[i]->fc_nodes, nlp_listp) { + if (ndlp->rport && + (ndlp->rport->roles & FC_RPORT_ROLE_FCP_TARGET)) { + ret = 1; + spin_unlock_irq(shost->host_lock); + goto out; + } else if (ndlp->nlp_flag & NLP_RPI_REGISTERED) { + ret = 1; + lpfc_printf_log(phba, KERN_INFO, + LOG_NODE | LOG_DISCOVERY, + "2624 RPI %x DID %x flag %x " + "still logged in\n", + ndlp->nlp_rpi, ndlp->nlp_DID, + ndlp->nlp_flag); + } + } + spin_unlock_irq(shost->host_lock); + } +out: + lpfc_destroy_vport_work_array(phba, vports); + return ret; +} + +/** + * lpfc_unregister_vfi_cmpl - Completion handler for unreg vfi. + * @phba: Pointer to hba context object. + * @mboxq: Pointer to mailbox object. + * + * This function frees memory associated with the mailbox command. + */ +void +lpfc_unregister_vfi_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) +{ + struct lpfc_vport *vport = mboxq->vport; + struct Scsi_Host *shost = lpfc_shost_from_vport(vport); + + if (mboxq->u.mb.mbxStatus) { + lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, + "2555 UNREG_VFI mbxStatus error x%x " + "HBA state x%x\n", + mboxq->u.mb.mbxStatus, vport->port_state); + } + spin_lock_irq(shost->host_lock); + phba->pport->fc_flag &= ~FC_VFI_REGISTERED; + spin_unlock_irq(shost->host_lock); + mempool_free(mboxq, phba->mbox_mem_pool); + return; +} + +/** + * lpfc_unregister_fcfi_cmpl - Completion handler for unreg fcfi. + * @phba: Pointer to hba context object. + * @mboxq: Pointer to mailbox object. + * + * This function frees memory associated with the mailbox command. + */ +static void +lpfc_unregister_fcfi_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) +{ + struct lpfc_vport *vport = mboxq->vport; + + if (mboxq->u.mb.mbxStatus) { + lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, + "2550 UNREG_FCFI mbxStatus error x%x " + "HBA state x%x\n", + mboxq->u.mb.mbxStatus, vport->port_state); + } + mempool_free(mboxq, phba->mbox_mem_pool); + return; +} + +/** + * lpfc_unregister_fcf_prep - Unregister fcf record preparation + * @phba: Pointer to hba context object. + * + * This function prepare the HBA for unregistering the currently registered + * FCF from the HBA. It performs unregistering, in order, RPIs, VPIs, and + * VFIs. + */ +int +lpfc_unregister_fcf_prep(struct lpfc_hba *phba) +{ + struct lpfc_vport **vports; + struct lpfc_nodelist *ndlp; + struct Scsi_Host *shost; + int i = 0, rc; + + /* Unregister RPIs */ + if (lpfc_fcf_inuse(phba)) + lpfc_unreg_hba_rpis(phba); + + /* At this point, all discovery is aborted */ + phba->pport->port_state = LPFC_VPORT_UNKNOWN; + + /* Unregister VPIs */ + vports = lpfc_create_vport_work_array(phba); + if (vports && (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)) + for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) { + /* Stop FLOGI/FDISC retries */ + ndlp = lpfc_findnode_did(vports[i], Fabric_DID); + if (ndlp) + lpfc_cancel_retry_delay_tmo(vports[i], ndlp); + lpfc_cleanup_pending_mbox(vports[i]); + if (phba->sli_rev == LPFC_SLI_REV4) + lpfc_sli4_unreg_all_rpis(vports[i]); + lpfc_mbx_unreg_vpi(vports[i]); + shost = lpfc_shost_from_vport(vports[i]); + spin_lock_irq(shost->host_lock); + vports[i]->fc_flag |= FC_VPORT_NEEDS_INIT_VPI; + vports[i]->vpi_state &= ~LPFC_VPI_REGISTERED; + spin_unlock_irq(shost->host_lock); + } + lpfc_destroy_vport_work_array(phba, vports); + if (i == 0 && (!(phba->sli3_options & LPFC_SLI3_NPIV_ENABLED))) { + ndlp = lpfc_findnode_did(phba->pport, Fabric_DID); + if (ndlp) + lpfc_cancel_retry_delay_tmo(phba->pport, ndlp); + lpfc_cleanup_pending_mbox(phba->pport); + if (phba->sli_rev == LPFC_SLI_REV4) + lpfc_sli4_unreg_all_rpis(phba->pport); + lpfc_mbx_unreg_vpi(phba->pport); + shost = lpfc_shost_from_vport(phba->pport); + spin_lock_irq(shost->host_lock); + phba->pport->fc_flag |= FC_VPORT_NEEDS_INIT_VPI; + phba->pport->vpi_state &= ~LPFC_VPI_REGISTERED; + spin_unlock_irq(shost->host_lock); + } + + /* Cleanup any outstanding ELS commands */ + lpfc_els_flush_all_cmd(phba); + + /* Unregister the physical port VFI */ + rc = lpfc_issue_unreg_vfi(phba->pport); + return rc; +} + +/** + * lpfc_sli4_unregister_fcf - Unregister currently registered FCF record + * @phba: Pointer to hba context object. + * + * This function issues synchronous unregister FCF mailbox command to HBA to + * unregister the currently registered FCF record. The driver does not reset + * the driver FCF usage state flags. + * + * Return 0 if successfully issued, none-zero otherwise. + */ +int +lpfc_sli4_unregister_fcf(struct lpfc_hba *phba) +{ + LPFC_MBOXQ_t *mbox; + int rc; + + mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + if (!mbox) { + lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, + "2551 UNREG_FCFI mbox allocation failed" + "HBA state x%x\n", phba->pport->port_state); + return -ENOMEM; + } + lpfc_unreg_fcfi(mbox, phba->fcf.fcfi); + mbox->vport = phba->pport; + mbox->mbox_cmpl = lpfc_unregister_fcfi_cmpl; + rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT); + + if (rc == MBX_NOT_FINISHED) { + lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, + "2552 Unregister FCFI command failed rc x%x " + "HBA state x%x\n", + rc, phba->pport->port_state); + return -EINVAL; + } + return 0; +} + +/** + * lpfc_unregister_fcf_rescan - Unregister currently registered fcf and rescan + * @phba: Pointer to hba context object. + * + * This function unregisters the currently reigstered FCF. This function + * also tries to find another FCF for discovery by rescan the HBA FCF table. + */ +void +lpfc_unregister_fcf_rescan(struct lpfc_hba *phba) +{ + int rc; + + /* Preparation for unregistering fcf */ + rc = lpfc_unregister_fcf_prep(phba); + if (rc) { + lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, + "2748 Failed to prepare for unregistering " + "HBA's FCF record: rc=%d\n", rc); + return; + } + + /* Now, unregister FCF record and reset HBA FCF state */ + rc = lpfc_sli4_unregister_fcf(phba); + if (rc) + return; + /* Reset HBA FCF states after successful unregister FCF */ + phba->fcf.fcf_flag = 0; + phba->fcf.current_rec.flag = 0; + + /* + * If driver is not unloading, check if there is any other + * FCF record that can be used for discovery. + */ + if ((phba->pport->load_flag & FC_UNLOADING) || + (phba->link_state < LPFC_LINK_UP)) + return; + + /* This is considered as the initial FCF discovery scan */ + spin_lock_irq(&phba->hbalock); + phba->fcf.fcf_flag |= FCF_INIT_DISC; + spin_unlock_irq(&phba->hbalock); + + /* Reset FCF roundrobin bmask for new discovery */ + lpfc_sli4_clear_fcf_rr_bmask(phba); + + rc = lpfc_sli4_fcf_scan_read_fcf_rec(phba, LPFC_FCOE_FCF_GET_FIRST); + + if (rc) { + spin_lock_irq(&phba->hbalock); + phba->fcf.fcf_flag &= ~FCF_INIT_DISC; + spin_unlock_irq(&phba->hbalock); + lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, + "2553 lpfc_unregister_unused_fcf failed " + "to read FCF record HBA state x%x\n", + phba->pport->port_state); + } +} + +/** + * lpfc_unregister_fcf - Unregister the currently registered fcf record + * @phba: Pointer to hba context object. + * + * This function just unregisters the currently reigstered FCF. It does not + * try to find another FCF for discovery. + */ +void +lpfc_unregister_fcf(struct lpfc_hba *phba) +{ + int rc; + + /* Preparation for unregistering fcf */ + rc = lpfc_unregister_fcf_prep(phba); + if (rc) { + lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, + "2749 Failed to prepare for unregistering " + "HBA's FCF record: rc=%d\n", rc); + return; + } + + /* Now, unregister FCF record and reset HBA FCF state */ + rc = lpfc_sli4_unregister_fcf(phba); + if (rc) + return; + /* Set proper HBA FCF states after successful unregister FCF */ + spin_lock_irq(&phba->hbalock); + phba->fcf.fcf_flag &= ~FCF_REGISTERED; + spin_unlock_irq(&phba->hbalock); +} + +/** + * lpfc_unregister_unused_fcf - Unregister FCF if all devices are disconnected. + * @phba: Pointer to hba context object. + * + * This function check if there are any connected remote port for the FCF and + * if all the devices are disconnected, this function unregister FCFI. + * This function also tries to use another FCF for discovery. + */ +void +lpfc_unregister_unused_fcf(struct lpfc_hba *phba) +{ + /* + * If HBA is not running in FIP mode, if HBA does not support + * FCoE, if FCF discovery is ongoing, or if FCF has not been + * registered, do nothing. + */ + spin_lock_irq(&phba->hbalock); + if (!(phba->hba_flag & HBA_FCOE_MODE) || + !(phba->fcf.fcf_flag & FCF_REGISTERED) || + !(phba->hba_flag & HBA_FIP_SUPPORT) || + (phba->fcf.fcf_flag & FCF_DISCOVERY) || + (phba->pport->port_state == LPFC_FLOGI)) { + spin_unlock_irq(&phba->hbalock); + return; + } + spin_unlock_irq(&phba->hbalock); + + if (lpfc_fcf_inuse(phba)) + return; + + lpfc_unregister_fcf_rescan(phba); +} + +/** + * lpfc_read_fcf_conn_tbl - Create driver FCF connection table. + * @phba: Pointer to hba context object. + * @buff: Buffer containing the FCF connection table as in the config + * region. + * This function create driver data structure for the FCF connection + * record table read from config region 23. + */ +static void +lpfc_read_fcf_conn_tbl(struct lpfc_hba *phba, + uint8_t *buff) +{ + struct lpfc_fcf_conn_entry *conn_entry, *next_conn_entry; + struct lpfc_fcf_conn_hdr *conn_hdr; + struct lpfc_fcf_conn_rec *conn_rec; + uint32_t record_count; + int i; + + /* Free the current connect table */ + list_for_each_entry_safe(conn_entry, next_conn_entry, + &phba->fcf_conn_rec_list, list) { + list_del_init(&conn_entry->list); + kfree(conn_entry); + } + + conn_hdr = (struct lpfc_fcf_conn_hdr *) buff; + record_count = conn_hdr->length * sizeof(uint32_t)/ + sizeof(struct lpfc_fcf_conn_rec); + + conn_rec = (struct lpfc_fcf_conn_rec *) + (buff + sizeof(struct lpfc_fcf_conn_hdr)); + + for (i = 0; i < record_count; i++) { + if (!(conn_rec[i].flags & FCFCNCT_VALID)) + continue; + conn_entry = kzalloc(sizeof(struct lpfc_fcf_conn_entry), + GFP_KERNEL); + if (!conn_entry) { + lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, + "2566 Failed to allocate connection" + " table entry\n"); + return; + } + + memcpy(&conn_entry->conn_rec, &conn_rec[i], + sizeof(struct lpfc_fcf_conn_rec)); + list_add_tail(&conn_entry->list, + &phba->fcf_conn_rec_list); + } + + if (!list_empty(&phba->fcf_conn_rec_list)) { + i = 0; + list_for_each_entry(conn_entry, &phba->fcf_conn_rec_list, + list) { + conn_rec = &conn_entry->conn_rec; + lpfc_printf_log(phba, KERN_INFO, LOG_INIT, + "3345 FCF connection list rec[%02d]: " + "flags:x%04x, vtag:x%04x, " + "fabric_name:x%02x:%02x:%02x:%02x:" + "%02x:%02x:%02x:%02x, " + "switch_name:x%02x:%02x:%02x:%02x:" + "%02x:%02x:%02x:%02x\n", i++, + conn_rec->flags, conn_rec->vlan_tag, + conn_rec->fabric_name[0], + conn_rec->fabric_name[1], + conn_rec->fabric_name[2], + conn_rec->fabric_name[3], + conn_rec->fabric_name[4], + conn_rec->fabric_name[5], + conn_rec->fabric_name[6], + conn_rec->fabric_name[7], + conn_rec->switch_name[0], + conn_rec->switch_name[1], + conn_rec->switch_name[2], + conn_rec->switch_name[3], + conn_rec->switch_name[4], + conn_rec->switch_name[5], + conn_rec->switch_name[6], + conn_rec->switch_name[7]); + } + } +} + +/** + * lpfc_read_fcoe_param - Read FCoe parameters from conf region.. + * @phba: Pointer to hba context object. + * @buff: Buffer containing the FCoE parameter data structure. + * + * This function update driver data structure with config + * parameters read from config region 23. + */ +static void +lpfc_read_fcoe_param(struct lpfc_hba *phba, + uint8_t *buff) +{ + struct lpfc_fip_param_hdr *fcoe_param_hdr; + struct lpfc_fcoe_params *fcoe_param; + + fcoe_param_hdr = (struct lpfc_fip_param_hdr *) + buff; + fcoe_param = (struct lpfc_fcoe_params *) + (buff + sizeof(struct lpfc_fip_param_hdr)); + + if ((fcoe_param_hdr->parm_version != FIPP_VERSION) || + (fcoe_param_hdr->length != FCOE_PARAM_LENGTH)) + return; + + if (fcoe_param_hdr->parm_flags & FIPP_VLAN_VALID) { + phba->valid_vlan = 1; + phba->vlan_id = le16_to_cpu(fcoe_param->vlan_tag) & + 0xFFF; + } + + phba->fc_map[0] = fcoe_param->fc_map[0]; + phba->fc_map[1] = fcoe_param->fc_map[1]; + phba->fc_map[2] = fcoe_param->fc_map[2]; + return; +} + +/** + * lpfc_get_rec_conf23 - Get a record type in config region data. + * @buff: Buffer containing config region 23 data. + * @size: Size of the data buffer. + * @rec_type: Record type to be searched. + * + * This function searches config region data to find the beginning + * of the record specified by record_type. If record found, this + * function return pointer to the record else return NULL. + */ +static uint8_t * +lpfc_get_rec_conf23(uint8_t *buff, uint32_t size, uint8_t rec_type) +{ + uint32_t offset = 0, rec_length; + + if ((buff[0] == LPFC_REGION23_LAST_REC) || + (size < sizeof(uint32_t))) + return NULL; + + rec_length = buff[offset + 1]; + + /* + * One TLV record has one word header and number of data words + * specified in the rec_length field of the record header. + */ + while ((offset + rec_length * sizeof(uint32_t) + sizeof(uint32_t)) + <= size) { + if (buff[offset] == rec_type) + return &buff[offset]; + + if (buff[offset] == LPFC_REGION23_LAST_REC) + return NULL; + + offset += rec_length * sizeof(uint32_t) + sizeof(uint32_t); + rec_length = buff[offset + 1]; + } + return NULL; +} + +/** + * lpfc_parse_fcoe_conf - Parse FCoE config data read from config region 23. + * @phba: Pointer to lpfc_hba data structure. + * @buff: Buffer containing config region 23 data. + * @size: Size of the data buffer. + * + * This function parses the FCoE config parameters in config region 23 and + * populate driver data structure with the parameters. + */ +void +lpfc_parse_fcoe_conf(struct lpfc_hba *phba, + uint8_t *buff, + uint32_t size) +{ + uint32_t offset = 0; + uint8_t *rec_ptr; + + /* + * If data size is less than 2 words signature and version cannot be + * verified. + */ + if (size < 2*sizeof(uint32_t)) + return; + + /* Check the region signature first */ + if (memcmp(buff, LPFC_REGION23_SIGNATURE, 4)) { + lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, + "2567 Config region 23 has bad signature\n"); + return; + } + + offset += 4; + + /* Check the data structure version */ + if (buff[offset] != LPFC_REGION23_VERSION) { + lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, + "2568 Config region 23 has bad version\n"); + return; + } + offset += 4; + + /* Read FCoE param record */ + rec_ptr = lpfc_get_rec_conf23(&buff[offset], + size - offset, FCOE_PARAM_TYPE); + if (rec_ptr) + lpfc_read_fcoe_param(phba, rec_ptr); + + /* Read FCF connection table */ + rec_ptr = lpfc_get_rec_conf23(&buff[offset], + size - offset, FCOE_CONN_TBL_TYPE); + if (rec_ptr) + lpfc_read_fcf_conn_tbl(phba, rec_ptr); + +} |