diff options
Diffstat (limited to 'drivers/tty/serial/8250/8250_dw.c')
| -rw-r--r-- | drivers/tty/serial/8250/8250_dw.c | 819 |
1 files changed, 819 insertions, 0 deletions
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c new file mode 100644 index 000000000..88035100b --- /dev/null +++ b/drivers/tty/serial/8250/8250_dw.c @@ -0,0 +1,819 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Synopsys DesignWare 8250 driver. + * + * Copyright 2011 Picochip, Jamie Iles. + * Copyright 2013 Intel Corporation + * + * The Synopsys DesignWare 8250 has an extra feature whereby it detects if the + * LCR is written whilst busy. If it is, then a busy detect interrupt is + * raised, the LCR needs to be rewritten and the uart status register read. + */ +#include <linux/acpi.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/io.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/notifier.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/property.h> +#include <linux/reset.h> +#include <linux/slab.h> +#include <linux/workqueue.h> + +#include <asm/byteorder.h> + +#include <linux/serial_8250.h> +#include <linux/serial_reg.h> + +#include "8250_dwlib.h" + +/* Offsets for the DesignWare specific registers */ +#define DW_UART_USR 0x1f /* UART Status Register */ +#define DW_UART_DMASA 0xa8 /* DMA Software Ack */ + +#define OCTEON_UART_USR 0x27 /* UART Status Register */ + +#define RZN1_UART_TDMACR 0x10c /* DMA Control Register Transmit Mode */ +#define RZN1_UART_RDMACR 0x110 /* DMA Control Register Receive Mode */ + +/* DesignWare specific register fields */ +#define DW_UART_MCR_SIRE BIT(6) + +/* Renesas specific register fields */ +#define RZN1_UART_xDMACR_DMA_EN BIT(0) +#define RZN1_UART_xDMACR_1_WORD_BURST (0 << 1) +#define RZN1_UART_xDMACR_4_WORD_BURST (1 << 1) +#define RZN1_UART_xDMACR_8_WORD_BURST (2 << 1) +#define RZN1_UART_xDMACR_BLK_SZ(x) ((x) << 3) + +/* Quirks */ +#define DW_UART_QUIRK_OCTEON BIT(0) +#define DW_UART_QUIRK_ARMADA_38X BIT(1) +#define DW_UART_QUIRK_SKIP_SET_RATE BIT(2) +#define DW_UART_QUIRK_IS_DMA_FC BIT(3) + +static inline struct dw8250_data *clk_to_dw8250_data(struct notifier_block *nb) +{ + return container_of(nb, struct dw8250_data, clk_notifier); +} + +static inline struct dw8250_data *work_to_dw8250_data(struct work_struct *work) +{ + return container_of(work, struct dw8250_data, clk_work); +} + +static inline int dw8250_modify_msr(struct uart_port *p, int offset, int value) +{ + struct dw8250_data *d = to_dw8250_data(p->private_data); + + /* Override any modem control signals if needed */ + if (offset == UART_MSR) { + value |= d->msr_mask_on; + value &= ~d->msr_mask_off; + } + + return value; +} + +static void dw8250_force_idle(struct uart_port *p) +{ + struct uart_8250_port *up = up_to_u8250p(p); + unsigned int lsr; + + serial8250_clear_and_reinit_fifos(up); + + /* + * With PSLVERR_RESP_EN parameter set to 1, the device generates an + * error response when an attempt to read an empty RBR with FIFO + * enabled. + */ + if (up->fcr & UART_FCR_ENABLE_FIFO) { + lsr = p->serial_in(p, UART_LSR); + if (!(lsr & UART_LSR_DR)) + return; + } + + (void)p->serial_in(p, UART_RX); +} + +static void dw8250_check_lcr(struct uart_port *p, int value) +{ + void __iomem *offset = p->membase + (UART_LCR << p->regshift); + int tries = 1000; + + /* Make sure LCR write wasn't ignored */ + while (tries--) { + unsigned int lcr = p->serial_in(p, UART_LCR); + + if ((value & ~UART_LCR_SPAR) == (lcr & ~UART_LCR_SPAR)) + return; + + dw8250_force_idle(p); + +#ifdef CONFIG_64BIT + if (p->type == PORT_OCTEON) + __raw_writeq(value & 0xff, offset); + else +#endif + if (p->iotype == UPIO_MEM32) + writel(value, offset); + else if (p->iotype == UPIO_MEM32BE) + iowrite32be(value, offset); + else + writeb(value, offset); + } + /* + * FIXME: this deadlocks if port->lock is already held + * dev_err(p->dev, "Couldn't set LCR to %d\n", value); + */ +} + +/* Returns once the transmitter is empty or we run out of retries */ +static void dw8250_tx_wait_empty(struct uart_port *p) +{ + struct uart_8250_port *up = up_to_u8250p(p); + unsigned int tries = 20000; + unsigned int delay_threshold = tries - 1000; + unsigned int lsr; + + while (tries--) { + lsr = readb (p->membase + (UART_LSR << p->regshift)); + up->lsr_saved_flags |= lsr & up->lsr_save_mask; + + if (lsr & UART_LSR_TEMT) + break; + + /* The device is first given a chance to empty without delay, + * to avoid slowdowns at high bitrates. If after 1000 tries + * the buffer has still not emptied, allow more time for low- + * speed links. */ + if (tries < delay_threshold) + udelay (1); + } +} + +static void dw8250_serial_out(struct uart_port *p, int offset, int value) +{ + struct dw8250_data *d = to_dw8250_data(p->private_data); + + writeb(value, p->membase + (offset << p->regshift)); + + if (offset == UART_LCR && !d->uart_16550_compatible) + dw8250_check_lcr(p, value); +} + +static void dw8250_serial_out38x(struct uart_port *p, int offset, int value) +{ + /* Allow the TX to drain before we reconfigure */ + if (offset == UART_LCR) + dw8250_tx_wait_empty(p); + + dw8250_serial_out(p, offset, value); +} + +static unsigned int dw8250_serial_in(struct uart_port *p, int offset) +{ + unsigned int value = readb(p->membase + (offset << p->regshift)); + + return dw8250_modify_msr(p, offset, value); +} + +#ifdef CONFIG_64BIT +static unsigned int dw8250_serial_inq(struct uart_port *p, int offset) +{ + unsigned int value; + + value = (u8)__raw_readq(p->membase + (offset << p->regshift)); + + return dw8250_modify_msr(p, offset, value); +} + +static void dw8250_serial_outq(struct uart_port *p, int offset, int value) +{ + struct dw8250_data *d = to_dw8250_data(p->private_data); + + value &= 0xff; + __raw_writeq(value, p->membase + (offset << p->regshift)); + /* Read back to ensure register write ordering. */ + __raw_readq(p->membase + (UART_LCR << p->regshift)); + + if (offset == UART_LCR && !d->uart_16550_compatible) + dw8250_check_lcr(p, value); +} +#endif /* CONFIG_64BIT */ + +static void dw8250_serial_out32(struct uart_port *p, int offset, int value) +{ + struct dw8250_data *d = to_dw8250_data(p->private_data); + + writel(value, p->membase + (offset << p->regshift)); + + if (offset == UART_LCR && !d->uart_16550_compatible) + dw8250_check_lcr(p, value); +} + +static unsigned int dw8250_serial_in32(struct uart_port *p, int offset) +{ + unsigned int value = readl(p->membase + (offset << p->regshift)); + + return dw8250_modify_msr(p, offset, value); +} + +static void dw8250_serial_out32be(struct uart_port *p, int offset, int value) +{ + struct dw8250_data *d = to_dw8250_data(p->private_data); + + iowrite32be(value, p->membase + (offset << p->regshift)); + + if (offset == UART_LCR && !d->uart_16550_compatible) + dw8250_check_lcr(p, value); +} + +static unsigned int dw8250_serial_in32be(struct uart_port *p, int offset) +{ + unsigned int value = ioread32be(p->membase + (offset << p->regshift)); + + return dw8250_modify_msr(p, offset, value); +} + + +static int dw8250_handle_irq(struct uart_port *p) +{ + struct uart_8250_port *up = up_to_u8250p(p); + struct dw8250_data *d = to_dw8250_data(p->private_data); + unsigned int iir = p->serial_in(p, UART_IIR); + bool rx_timeout = (iir & 0x3f) == UART_IIR_RX_TIMEOUT; + unsigned int quirks = d->pdata->quirks; + unsigned int status; + unsigned long flags; + + /* + * There are ways to get Designware-based UARTs into a state where + * they are asserting UART_IIR_RX_TIMEOUT but there is no actual + * data available. If we see such a case then we'll do a bogus + * read. If we don't do this then the "RX TIMEOUT" interrupt will + * fire forever. + * + * This problem has only been observed so far when not in DMA mode + * so we limit the workaround only to non-DMA mode. + */ + if (!up->dma && rx_timeout) { + spin_lock_irqsave(&p->lock, flags); + status = serial_lsr_in(up); + + if (!(status & (UART_LSR_DR | UART_LSR_BI))) + (void) p->serial_in(p, UART_RX); + + spin_unlock_irqrestore(&p->lock, flags); + } + + /* Manually stop the Rx DMA transfer when acting as flow controller */ + if (quirks & DW_UART_QUIRK_IS_DMA_FC && up->dma && up->dma->rx_running && rx_timeout) { + spin_lock_irqsave(&p->lock, flags); + status = serial_lsr_in(up); + spin_unlock_irqrestore(&p->lock, flags); + + if (status & (UART_LSR_DR | UART_LSR_BI)) { + dw8250_writel_ext(p, RZN1_UART_RDMACR, 0); + dw8250_writel_ext(p, DW_UART_DMASA, 1); + } + } + + if (serial8250_handle_irq(p, iir)) + return 1; + + if ((iir & UART_IIR_BUSY) == UART_IIR_BUSY) { + /* Clear the USR */ + (void)p->serial_in(p, d->pdata->usr_reg); + + return 1; + } + + return 0; +} + +static void dw8250_clk_work_cb(struct work_struct *work) +{ + struct dw8250_data *d = work_to_dw8250_data(work); + struct uart_8250_port *up; + unsigned long rate; + + rate = clk_get_rate(d->clk); + if (rate <= 0) + return; + + up = serial8250_get_port(d->data.line); + + serial8250_update_uartclk(&up->port, rate); +} + +static int dw8250_clk_notifier_cb(struct notifier_block *nb, + unsigned long event, void *data) +{ + struct dw8250_data *d = clk_to_dw8250_data(nb); + + /* + * We have no choice but to defer the uartclk update due to two + * deadlocks. First one is caused by a recursive mutex lock which + * happens when clk_set_rate() is called from dw8250_set_termios(). + * Second deadlock is more tricky and is caused by an inverted order of + * the clk and tty-port mutexes lock. It happens if clock rate change + * is requested asynchronously while set_termios() is executed between + * tty-port mutex lock and clk_set_rate() function invocation and + * vise-versa. Anyway if we didn't have the reference clock alteration + * in the dw8250_set_termios() method we wouldn't have needed this + * deferred event handling complication. + */ + if (event == POST_RATE_CHANGE) { + queue_work(system_unbound_wq, &d->clk_work); + return NOTIFY_OK; + } + + return NOTIFY_DONE; +} + +static void +dw8250_do_pm(struct uart_port *port, unsigned int state, unsigned int old) +{ + if (!state) + pm_runtime_get_sync(port->dev); + + serial8250_do_pm(port, state, old); + + if (state) + pm_runtime_put_sync_suspend(port->dev); +} + +static void dw8250_set_termios(struct uart_port *p, struct ktermios *termios, + const struct ktermios *old) +{ + unsigned long newrate = tty_termios_baud_rate(termios) * 16; + struct dw8250_data *d = to_dw8250_data(p->private_data); + long rate; + int ret; + + clk_disable_unprepare(d->clk); + rate = clk_round_rate(d->clk, newrate); + if (rate > 0) { + /* + * Note that any clock-notifer worker will block in + * serial8250_update_uartclk() until we are done. + */ + ret = clk_set_rate(d->clk, newrate); + if (!ret) + p->uartclk = rate; + } + clk_prepare_enable(d->clk); + + dw8250_do_set_termios(p, termios, old); +} + +static void dw8250_set_ldisc(struct uart_port *p, struct ktermios *termios) +{ + struct uart_8250_port *up = up_to_u8250p(p); + unsigned int mcr = p->serial_in(p, UART_MCR); + + if (up->capabilities & UART_CAP_IRDA) { + if (termios->c_line == N_IRDA) + mcr |= DW_UART_MCR_SIRE; + else + mcr &= ~DW_UART_MCR_SIRE; + + p->serial_out(p, UART_MCR, mcr); + } + serial8250_do_set_ldisc(p, termios); +} + +/* + * dw8250_fallback_dma_filter will prevent the UART from getting just any free + * channel on platforms that have DMA engines, but don't have any channels + * assigned to the UART. + * + * REVISIT: This is a work around for limitation in the DMA Engine API. Once the + * core problem is fixed, this function is no longer needed. + */ +static bool dw8250_fallback_dma_filter(struct dma_chan *chan, void *param) +{ + return false; +} + +static bool dw8250_idma_filter(struct dma_chan *chan, void *param) +{ + return param == chan->device->dev; +} + +static u32 dw8250_rzn1_get_dmacr_burst(int max_burst) +{ + if (max_burst >= 8) + return RZN1_UART_xDMACR_8_WORD_BURST; + else if (max_burst >= 4) + return RZN1_UART_xDMACR_4_WORD_BURST; + else + return RZN1_UART_xDMACR_1_WORD_BURST; +} + +static void dw8250_prepare_tx_dma(struct uart_8250_port *p) +{ + struct uart_port *up = &p->port; + struct uart_8250_dma *dma = p->dma; + u32 val; + + dw8250_writel_ext(up, RZN1_UART_TDMACR, 0); + val = dw8250_rzn1_get_dmacr_burst(dma->txconf.dst_maxburst) | + RZN1_UART_xDMACR_BLK_SZ(dma->tx_size) | + RZN1_UART_xDMACR_DMA_EN; + dw8250_writel_ext(up, RZN1_UART_TDMACR, val); +} + +static void dw8250_prepare_rx_dma(struct uart_8250_port *p) +{ + struct uart_port *up = &p->port; + struct uart_8250_dma *dma = p->dma; + u32 val; + + dw8250_writel_ext(up, RZN1_UART_RDMACR, 0); + val = dw8250_rzn1_get_dmacr_burst(dma->rxconf.src_maxburst) | + RZN1_UART_xDMACR_BLK_SZ(dma->rx_size) | + RZN1_UART_xDMACR_DMA_EN; + dw8250_writel_ext(up, RZN1_UART_RDMACR, val); +} + +static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data) +{ + struct device_node *np = p->dev->of_node; + + if (np) { + unsigned int quirks = data->pdata->quirks; + int id; + + /* get index of serial line, if found in DT aliases */ + id = of_alias_get_id(np, "serial"); + if (id >= 0) + p->line = id; +#ifdef CONFIG_64BIT + if (quirks & DW_UART_QUIRK_OCTEON) { + p->serial_in = dw8250_serial_inq; + p->serial_out = dw8250_serial_outq; + p->flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE; + p->type = PORT_OCTEON; + data->skip_autocfg = true; + } +#endif + + if (of_device_is_big_endian(np)) { + p->iotype = UPIO_MEM32BE; + p->serial_in = dw8250_serial_in32be; + p->serial_out = dw8250_serial_out32be; + } + + if (quirks & DW_UART_QUIRK_ARMADA_38X) + p->serial_out = dw8250_serial_out38x; + if (quirks & DW_UART_QUIRK_SKIP_SET_RATE) + p->set_termios = dw8250_do_set_termios; + if (quirks & DW_UART_QUIRK_IS_DMA_FC) { + data->data.dma.txconf.device_fc = 1; + data->data.dma.rxconf.device_fc = 1; + data->data.dma.prepare_tx_dma = dw8250_prepare_tx_dma; + data->data.dma.prepare_rx_dma = dw8250_prepare_rx_dma; + } + + } else if (acpi_dev_present("APMC0D08", NULL, -1)) { + p->iotype = UPIO_MEM32; + p->regshift = 2; + p->serial_in = dw8250_serial_in32; + data->uart_16550_compatible = true; + } + + /* Platforms with iDMA 64-bit */ + if (platform_get_resource_byname(to_platform_device(p->dev), + IORESOURCE_MEM, "lpss_priv")) { + data->data.dma.rx_param = p->dev->parent; + data->data.dma.tx_param = p->dev->parent; + data->data.dma.fn = dw8250_idma_filter; + } +} + +static void dw8250_clk_disable_unprepare(void *data) +{ + clk_disable_unprepare(data); +} + +static void dw8250_reset_control_assert(void *data) +{ + reset_control_assert(data); +} + +static int dw8250_probe(struct platform_device *pdev) +{ + struct uart_8250_port uart = {}, *up = &uart; + struct uart_port *p = &up->port; + struct device *dev = &pdev->dev; + struct dw8250_data *data; + struct resource *regs; + int irq; + int err; + u32 val; + + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!regs) + return dev_err_probe(dev, -EINVAL, "no registers defined\n"); + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + spin_lock_init(&p->lock); + p->mapbase = regs->start; + p->irq = irq; + p->handle_irq = dw8250_handle_irq; + p->pm = dw8250_do_pm; + p->type = PORT_8250; + p->flags = UPF_SHARE_IRQ | UPF_FIXED_PORT; + p->dev = dev; + p->iotype = UPIO_MEM; + p->serial_in = dw8250_serial_in; + p->serial_out = dw8250_serial_out; + p->set_ldisc = dw8250_set_ldisc; + p->set_termios = dw8250_set_termios; + + p->membase = devm_ioremap(dev, regs->start, resource_size(regs)); + if (!p->membase) + return -ENOMEM; + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->data.dma.fn = dw8250_fallback_dma_filter; + data->pdata = device_get_match_data(p->dev); + p->private_data = &data->data; + + data->uart_16550_compatible = device_property_read_bool(dev, + "snps,uart-16550-compatible"); + + err = device_property_read_u32(dev, "reg-shift", &val); + if (!err) + p->regshift = val; + + err = device_property_read_u32(dev, "reg-io-width", &val); + if (!err && val == 4) { + p->iotype = UPIO_MEM32; + p->serial_in = dw8250_serial_in32; + p->serial_out = dw8250_serial_out32; + } + + if (device_property_read_bool(dev, "dcd-override")) { + /* Always report DCD as active */ + data->msr_mask_on |= UART_MSR_DCD; + data->msr_mask_off |= UART_MSR_DDCD; + } + + if (device_property_read_bool(dev, "dsr-override")) { + /* Always report DSR as active */ + data->msr_mask_on |= UART_MSR_DSR; + data->msr_mask_off |= UART_MSR_DDSR; + } + + if (device_property_read_bool(dev, "cts-override")) { + /* Always report CTS as active */ + data->msr_mask_on |= UART_MSR_CTS; + data->msr_mask_off |= UART_MSR_DCTS; + } + + if (device_property_read_bool(dev, "ri-override")) { + /* Always report Ring indicator as inactive */ + data->msr_mask_off |= UART_MSR_RI; + data->msr_mask_off |= UART_MSR_TERI; + } + + /* Always ask for fixed clock rate from a property. */ + device_property_read_u32(dev, "clock-frequency", &p->uartclk); + + /* If there is separate baudclk, get the rate from it. */ + data->clk = devm_clk_get_optional(dev, "baudclk"); + if (data->clk == NULL) + data->clk = devm_clk_get_optional(dev, NULL); + if (IS_ERR(data->clk)) + return PTR_ERR(data->clk); + + INIT_WORK(&data->clk_work, dw8250_clk_work_cb); + data->clk_notifier.notifier_call = dw8250_clk_notifier_cb; + + err = clk_prepare_enable(data->clk); + if (err) + return dev_err_probe(dev, err, "could not enable optional baudclk\n"); + + err = devm_add_action_or_reset(dev, dw8250_clk_disable_unprepare, data->clk); + if (err) + return err; + + if (data->clk) + p->uartclk = clk_get_rate(data->clk); + + /* If no clock rate is defined, fail. */ + if (!p->uartclk) + return dev_err_probe(dev, -EINVAL, "clock rate not defined\n"); + + data->pclk = devm_clk_get_optional(dev, "apb_pclk"); + if (IS_ERR(data->pclk)) + return PTR_ERR(data->pclk); + + err = clk_prepare_enable(data->pclk); + if (err) + return dev_err_probe(dev, err, "could not enable apb_pclk\n"); + + err = devm_add_action_or_reset(dev, dw8250_clk_disable_unprepare, data->pclk); + if (err) + return err; + + data->rst = devm_reset_control_get_optional_exclusive(dev, NULL); + if (IS_ERR(data->rst)) + return PTR_ERR(data->rst); + + reset_control_deassert(data->rst); + + err = devm_add_action_or_reset(dev, dw8250_reset_control_assert, data->rst); + if (err) + return err; + + dw8250_quirks(p, data); + + /* If the Busy Functionality is not implemented, don't handle it */ + if (data->uart_16550_compatible) + p->handle_irq = NULL; + + if (!data->skip_autocfg) + dw8250_setup_port(p); + + /* If we have a valid fifosize, try hooking up DMA */ + if (p->fifosize) { + data->data.dma.rxconf.src_maxburst = p->fifosize / 4; + data->data.dma.txconf.dst_maxburst = p->fifosize / 4; + up->dma = &data->data.dma; + } + + data->data.line = serial8250_register_8250_port(up); + if (data->data.line < 0) + return data->data.line; + + /* + * Some platforms may provide a reference clock shared between several + * devices. In this case any clock state change must be known to the + * UART port at least post factum. + */ + if (data->clk) { + err = clk_notifier_register(data->clk, &data->clk_notifier); + if (err) + return dev_err_probe(dev, err, "Failed to set the clock notifier\n"); + queue_work(system_unbound_wq, &data->clk_work); + } + + platform_set_drvdata(pdev, data); + + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + + return 0; +} + +static int dw8250_remove(struct platform_device *pdev) +{ + struct dw8250_data *data = platform_get_drvdata(pdev); + struct device *dev = &pdev->dev; + + pm_runtime_get_sync(dev); + + if (data->clk) { + clk_notifier_unregister(data->clk, &data->clk_notifier); + + flush_work(&data->clk_work); + } + + serial8250_unregister_port(data->data.line); + + pm_runtime_disable(dev); + pm_runtime_put_noidle(dev); + + return 0; +} + +static int dw8250_suspend(struct device *dev) +{ + struct dw8250_data *data = dev_get_drvdata(dev); + + serial8250_suspend_port(data->data.line); + + return 0; +} + +static int dw8250_resume(struct device *dev) +{ + struct dw8250_data *data = dev_get_drvdata(dev); + + serial8250_resume_port(data->data.line); + + return 0; +} + +static int dw8250_runtime_suspend(struct device *dev) +{ + struct dw8250_data *data = dev_get_drvdata(dev); + + clk_disable_unprepare(data->clk); + + clk_disable_unprepare(data->pclk); + + return 0; +} + +static int dw8250_runtime_resume(struct device *dev) +{ + struct dw8250_data *data = dev_get_drvdata(dev); + + clk_prepare_enable(data->pclk); + + clk_prepare_enable(data->clk); + + return 0; +} + +static const struct dev_pm_ops dw8250_pm_ops = { + SYSTEM_SLEEP_PM_OPS(dw8250_suspend, dw8250_resume) + RUNTIME_PM_OPS(dw8250_runtime_suspend, dw8250_runtime_resume, NULL) +}; + +static const struct dw8250_platform_data dw8250_dw_apb = { + .usr_reg = DW_UART_USR, +}; + +static const struct dw8250_platform_data dw8250_octeon_3860_data = { + .usr_reg = OCTEON_UART_USR, + .quirks = DW_UART_QUIRK_OCTEON, +}; + +static const struct dw8250_platform_data dw8250_armada_38x_data = { + .usr_reg = DW_UART_USR, + .quirks = DW_UART_QUIRK_ARMADA_38X, +}; + +static const struct dw8250_platform_data dw8250_renesas_rzn1_data = { + .usr_reg = DW_UART_USR, + .cpr_val = 0x00012f32, + .quirks = DW_UART_QUIRK_IS_DMA_FC, +}; + +static const struct dw8250_platform_data dw8250_starfive_jh7100_data = { + .usr_reg = DW_UART_USR, + .quirks = DW_UART_QUIRK_SKIP_SET_RATE, +}; + +static const struct of_device_id dw8250_of_match[] = { + { .compatible = "snps,dw-apb-uart", .data = &dw8250_dw_apb }, + { .compatible = "cavium,octeon-3860-uart", .data = &dw8250_octeon_3860_data }, + { .compatible = "marvell,armada-38x-uart", .data = &dw8250_armada_38x_data }, + { .compatible = "renesas,rzn1-uart", .data = &dw8250_renesas_rzn1_data }, + { .compatible = "starfive,jh7100-uart", .data = &dw8250_starfive_jh7100_data }, + { /* Sentinel */ } +}; +MODULE_DEVICE_TABLE(of, dw8250_of_match); + +static const struct acpi_device_id dw8250_acpi_match[] = { + { "80860F0A", (kernel_ulong_t)&dw8250_dw_apb }, + { "8086228A", (kernel_ulong_t)&dw8250_dw_apb }, + { "AMD0020", (kernel_ulong_t)&dw8250_dw_apb }, + { "AMDI0020", (kernel_ulong_t)&dw8250_dw_apb }, + { "AMDI0022", (kernel_ulong_t)&dw8250_dw_apb }, + { "APMC0D08", (kernel_ulong_t)&dw8250_dw_apb}, + { "BRCM2032", (kernel_ulong_t)&dw8250_dw_apb }, + { "HISI0031", (kernel_ulong_t)&dw8250_dw_apb }, + { "INT33C4", (kernel_ulong_t)&dw8250_dw_apb }, + { "INT33C5", (kernel_ulong_t)&dw8250_dw_apb }, + { "INT3434", (kernel_ulong_t)&dw8250_dw_apb }, + { "INT3435", (kernel_ulong_t)&dw8250_dw_apb }, + { "INTC10EE", (kernel_ulong_t)&dw8250_dw_apb }, + { }, +}; +MODULE_DEVICE_TABLE(acpi, dw8250_acpi_match); + +static struct platform_driver dw8250_platform_driver = { + .driver = { + .name = "dw-apb-uart", + .pm = pm_ptr(&dw8250_pm_ops), + .of_match_table = dw8250_of_match, + .acpi_match_table = dw8250_acpi_match, + }, + .probe = dw8250_probe, + .remove = dw8250_remove, +}; + +module_platform_driver(dw8250_platform_driver); + +MODULE_AUTHOR("Jamie Iles"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Synopsys DesignWare 8250 serial port driver"); +MODULE_ALIAS("platform:dw-apb-uart"); |