summaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial/Kconfig')
-rw-r--r--drivers/tty/serial/Kconfig1566
1 files changed, 1566 insertions, 0 deletions
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
new file mode 100644
index 000000000..12f685168
--- /dev/null
+++ b/drivers/tty/serial/Kconfig
@@ -0,0 +1,1566 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Serial device configuration
+#
+
+menu "Serial drivers"
+ depends on HAS_IOMEM
+
+config SERIAL_EARLYCON
+ bool
+ depends on SERIAL_CORE
+ help
+ Support for early consoles with the earlycon parameter. This enables
+ the console before standard serial driver is probed. The console is
+ enabled when early_param is processed.
+
+source "drivers/tty/serial/8250/Kconfig"
+
+comment "Non-8250 serial port support"
+
+config SERIAL_AMBA_PL010
+ tristate "ARM AMBA PL010 serial port support"
+ depends on ARM_AMBA || COMPILE_TEST
+ select SERIAL_CORE
+ help
+ This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have
+ an Integrator/AP or Integrator/PP2 platform, or if you have a
+ Cirrus Logic EP93xx CPU, say Y or M here.
+
+ If unsure, say N.
+
+config SERIAL_AMBA_PL010_CONSOLE
+ bool "Support for console on AMBA serial port"
+ depends on SERIAL_AMBA_PL010=y
+ select SERIAL_CORE_CONSOLE
+ help
+ Say Y here if you wish to use an AMBA PrimeCell UART as the system
+ console (the system console is the device which receives all kernel
+ messages and warnings and which allows logins in single user mode).
+
+ Even if you say Y here, the currently visible framebuffer console
+ (/dev/tty0) will still be used as the system console by default, but
+ you can alter that using a kernel command line option such as
+ "console=ttyAM0". (Try "man bootparam" or see the documentation of
+ your boot loader (lilo or loadlin) about how to pass options to the
+ kernel at boot time.)
+
+config SERIAL_AMBA_PL011
+ tristate "ARM AMBA PL011 serial port support"
+ depends on ARM_AMBA
+ select SERIAL_CORE
+ help
+ This selects the ARM(R) AMBA(R) PrimeCell PL011 UART. If you have
+ an Integrator/PP2, Integrator/CP or Versatile platform, say Y or M
+ here.
+
+ If unsure, say N.
+
+config SERIAL_AMBA_PL011_CONSOLE
+ bool "Support for console on AMBA serial port"
+ depends on SERIAL_AMBA_PL011=y
+ select SERIAL_CORE_CONSOLE
+ select SERIAL_EARLYCON
+ help
+ Say Y here if you wish to use an AMBA PrimeCell UART as the system
+ console (the system console is the device which receives all kernel
+ messages and warnings and which allows logins in single user mode).
+
+ Even if you say Y here, the currently visible framebuffer console
+ (/dev/tty0) will still be used as the system console by default, but
+ you can alter that using a kernel command line option such as
+ "console=ttyAMA0". (Try "man bootparam" or see the documentation of
+ your boot loader (lilo or loadlin) about how to pass options to the
+ kernel at boot time.)
+
+config SERIAL_EARLYCON_ARM_SEMIHOST
+ bool "Early console using ARM semihosting"
+ depends on ARM64 || ARM
+ select SERIAL_CORE
+ select SERIAL_CORE_CONSOLE
+ select SERIAL_EARLYCON
+ help
+ Support for early debug console using ARM semihosting. This enables
+ the console before standard serial driver is probed. This is enabled
+ with "earlycon=smh" on the kernel command line. The console is
+ enabled when early_param is processed.
+
+config SERIAL_EARLYCON_RISCV_SBI
+ bool "Early console using RISC-V SBI"
+ depends on RISCV_SBI_V01
+ select SERIAL_CORE
+ select SERIAL_CORE_CONSOLE
+ select SERIAL_EARLYCON
+ help
+ Support for early debug console using RISC-V SBI. This enables
+ the console before standard serial driver is probed. This is enabled
+ with "earlycon=sbi" on the kernel command line. The console is
+ enabled when early_param is processed.
+
+config SERIAL_SB1250_DUART
+ tristate "BCM1xxx on-chip DUART serial support"
+ depends on SIBYTE_SB1xxx_SOC=y
+ select SERIAL_CORE
+ default y
+ help
+ Support for the asynchronous serial interface (DUART) included in
+ the BCM1250 and derived System-On-a-Chip (SOC) devices. Note that
+ the letter D in DUART stands for "dual", which is how the device
+ is implemented. Depending on the SOC configuration there may be
+ one or more DUARTs available of which all are handled.
+
+ If unsure, say Y. To compile this driver as a module, choose M here:
+ the module will be called sb1250-duart.
+
+config SERIAL_SB1250_DUART_CONSOLE
+ bool "Support for console on a BCM1xxx DUART serial port"
+ depends on SERIAL_SB1250_DUART=y
+ select SERIAL_CORE_CONSOLE
+ default y
+ help
+ If you say Y here, it will be possible to use a serial port as the
+ system console (the system console is the device which receives all
+ kernel messages and warnings and which allows logins in single user
+ mode).
+
+ If unsure, say Y.
+
+config SERIAL_ATMEL
+ bool "AT91 on-chip serial port support"
+ depends on COMMON_CLK
+ depends on ARCH_AT91 || COMPILE_TEST
+ select SERIAL_CORE
+ select SERIAL_MCTRL_GPIO if GPIOLIB
+ select MFD_AT91_USART
+ help
+ This enables the driver for the on-chip UARTs of the Atmel
+ AT91 processors.
+
+config SERIAL_ATMEL_CONSOLE
+ bool "Support for console on AT91 serial port"
+ depends on SERIAL_ATMEL=y
+ select SERIAL_CORE_CONSOLE
+ select SERIAL_EARLYCON
+ help
+ Say Y here if you wish to use an on-chip UART on a Atmel
+ AT91 processor as the system console (the system
+ console is the device which receives all kernel messages and
+ warnings and which allows logins in single user mode).
+
+config SERIAL_ATMEL_PDC
+ bool "Support DMA transfers on AT91 serial port"
+ depends on SERIAL_ATMEL
+ default y
+ help
+ Say Y here if you wish to use the PDC to do DMA transfers to
+ and from the Atmel AT91 serial port. In order to
+ actually use DMA transfers, make sure that the use_dma_tx
+ and use_dma_rx members in the atmel_uart_data struct is set
+ appropriately for each port.
+
+ Note that break and error handling currently doesn't work
+ properly when DMA is enabled. Make sure that ports where
+ this matters don't use DMA.
+
+config SERIAL_ATMEL_TTYAT
+ bool "Install as device ttyATn instead of ttySn"
+ depends on SERIAL_ATMEL=y
+ help
+ Say Y here if you wish to have the internal AT91 UARTs
+ appear as /dev/ttyATn (major 204, minor starting at 154)
+ instead of the normal /dev/ttySn (major 4, minor starting at
+ 64). This is necessary if you also want other UARTs, such as
+ external 8250/16C550 compatible UARTs.
+ The ttySn nodes are legally reserved for the 8250 serial driver
+ but are often misused by other serial drivers.
+
+ To use this, you should create suitable ttyATn device nodes in
+ /dev/, and pass "console=ttyATn" to the kernel.
+
+ Say Y if you have an external 8250/16C550 UART. If unsure, say N.
+
+config SERIAL_KGDB_NMI
+ bool "Serial console over KGDB NMI debugger port"
+ depends on KGDB_SERIAL_CONSOLE
+ help
+ This special driver allows you to temporary use NMI debugger port
+ as a normal console (assuming that the port is attached to KGDB).
+
+ Unlike KDB's disable_nmi command, with this driver you are always
+ able to go back to the debugger using KGDB escape sequence ($3#33).
+ This is because this console driver processes the input in NMI
+ context, and thus is able to intercept the magic sequence.
+
+ Note that since the console interprets input and uses polling
+ communication methods, for things like PPP you still must fully
+ detach debugger port from the KGDB NMI (i.e. disable_nmi), and
+ use raw console.
+
+ If unsure, say N.
+
+config SERIAL_MESON
+ tristate "Meson serial port support"
+ depends on ARCH_MESON || COMPILE_TEST
+ select SERIAL_CORE
+ help
+ This enables the driver for the on-chip UARTs of the Amlogic
+ MesonX processors.
+
+config SERIAL_MESON_CONSOLE
+ bool "Support for console on meson"
+ depends on SERIAL_MESON
+ select SERIAL_CORE_CONSOLE
+ select SERIAL_EARLYCON
+ help
+ Say Y here if you wish to use a Amlogic MesonX UART as the
+ system console (the system console is the device which
+ receives all kernel messages and warnings and which allows
+ logins in single user mode) as /dev/ttyAMLx.
+
+config SERIAL_CLPS711X
+ tristate "CLPS711X serial port support"
+ depends on ARCH_CLPS711X || COMPILE_TEST
+ select SERIAL_CORE
+ select SERIAL_MCTRL_GPIO if GPIOLIB
+ help
+ This enables the driver for the on-chip UARTs of the Cirrus
+ Logic EP711x/EP721x/EP731x processors.
+
+config SERIAL_CLPS711X_CONSOLE
+ bool "Support for console on CLPS711X serial port"
+ depends on SERIAL_CLPS711X=y
+ select SERIAL_CORE_CONSOLE
+ help
+ Even if you say Y here, the currently visible virtual console
+ (/dev/tty0) will still be used as the system console by default, but
+ you can alter that using a kernel command line option such as
+ "console=ttyCL1".
+
+config SERIAL_SAMSUNG
+ tristate "Samsung SoC serial support"
+ depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || ARCH_APPLE || ARCH_ARTPEC || COMPILE_TEST
+ select SERIAL_CORE
+ help
+ Support for the on-chip UARTs on the Samsung
+ S3C24xx/S3C64xx/S5Pv210/Exynos and Apple M1 SoCs, providing
+ /dev/ttySAC0, 1 and 2 (note, some machines may not provide all of
+ these ports, depending on how the serial port pins are configured.
+ Choose Y/M here only if you build for such SoC.
+
+config SERIAL_SAMSUNG_UARTS_4
+ bool
+ depends on SERIAL_SAMSUNG
+ default y if !(CPU_S3C2410 || CPU_S3C2412 || CPU_S3C2440 || CPU_S3C2442)
+ help
+ Internal node for the common case of 4 Samsung compatible UARTs
+
+config SERIAL_SAMSUNG_UARTS
+ int
+ depends on SERIAL_SAMSUNG
+ default 4 if SERIAL_SAMSUNG_UARTS_4 || CPU_S3C2416
+ default 3
+ help
+ Select the number of available UART ports for the Samsung S3C
+ serial driver
+
+config SERIAL_SAMSUNG_CONSOLE
+ bool "Support for console on Samsung SoC serial port"
+ depends on SERIAL_SAMSUNG
+ select SERIAL_CORE_CONSOLE
+ select SERIAL_EARLYCON
+ help
+ Allow selection of the S3C24XX on-board serial ports for use as
+ an virtual console.
+
+ Even if you say Y here, the currently visible virtual console
+ (/dev/tty0) will still be used as the system console by default, but
+ you can alter that using a kernel command line option such as
+ "console=ttySACx". (Try "man bootparam" or see the documentation of
+ your boot loader about how to pass options to the kernel at
+ boot time.)
+
+config SERIAL_TEGRA
+ tristate "NVIDIA Tegra20/30 SoC serial controller"
+ depends on (ARCH_TEGRA && TEGRA20_APB_DMA) || COMPILE_TEST
+ select SERIAL_CORE
+ help
+ Support for the on-chip UARTs on the NVIDIA Tegra series SOCs
+ providing /dev/ttyTHS0, 1, 2, 3 and 4 (note, some machines may not
+ provide all of these ports, depending on how the serial port
+ are enabled). This driver uses the APB DMA to achieve higher baudrate
+ and better performance.
+
+config SERIAL_TEGRA_TCU
+ tristate "NVIDIA Tegra Combined UART"
+ depends on MAILBOX
+ depends on (ARCH_TEGRA && TEGRA_HSP_MBOX) || COMPILE_TEST
+ select SERIAL_CORE
+ help
+ Support for the mailbox-based TCU (Tegra Combined UART) serial port.
+ TCU is a virtual serial port that allows multiplexing multiple data
+ streams into a single hardware serial port.
+
+config SERIAL_TEGRA_TCU_CONSOLE
+ bool "Support for console on a Tegra TCU serial port"
+ depends on SERIAL_TEGRA_TCU=y
+ select SERIAL_CORE_CONSOLE
+ default y
+ help
+ If you say Y here, it will be possible to use a the Tegra TCU as the
+ system console (the system console is the device which receives all
+ kernel messages and warnings and which allows logins in single user
+ mode).
+
+ If unsure, say Y.
+
+config SERIAL_MAX3100
+ tristate "MAX3100 support"
+ depends on SPI
+ select SERIAL_CORE
+ help
+ MAX3100 chip support
+
+config SERIAL_MAX310X
+ tristate "MAX310X support"
+ depends on SPI_MASTER
+ select SERIAL_CORE
+ select REGMAP_SPI if SPI_MASTER
+ select REGMAP_I2C if I2C
+ help
+ This selects support for an advanced UART from Maxim (Dallas).
+ Supported ICs are MAX3107, MAX3108, MAX3109, MAX14830.
+ Each IC contains 128 words each of receive and transmit FIFO
+ that can be controlled through I2C or high-speed SPI.
+
+ Say Y here if you want to support this ICs.
+
+config SERIAL_DZ
+ bool "DECstation DZ serial driver"
+ depends on MACH_DECSTATION && 32BIT
+ select SERIAL_CORE
+ default y
+ help
+ DZ11-family serial controllers for DECstations and VAXstations,
+ including the DC7085, M7814, and M7819.
+
+config SERIAL_DZ_CONSOLE
+ bool "Support console on DECstation DZ serial driver"
+ depends on SERIAL_DZ=y
+ select SERIAL_CORE_CONSOLE
+ default y
+ help
+ If you say Y here, it will be possible to use a serial port as the
+ system console (the system console is the device which receives all
+ kernel messages and warnings and which allows logins in single user
+ mode).
+
+ Note that the firmware uses ttyS3 as the serial console on
+ DECstations that use this driver.
+
+ If unsure, say Y.
+
+config SERIAL_ZS
+ tristate "DECstation Z85C30 serial support"
+ depends on MACH_DECSTATION
+ select SERIAL_CORE
+ default y
+ help
+ Support for the Zilog 85C350 serial communications controller used
+ for serial ports in newer DECstation systems. These include the
+ DECsystem 5900 and all models of the DECstation and DECsystem 5000
+ systems except from model 200.
+
+ If unsure, say Y. To compile this driver as a module, choose M here:
+ the module will be called zs.
+
+config SERIAL_ZS_CONSOLE
+ bool "Support for console on a DECstation Z85C30 serial port"
+ depends on SERIAL_ZS=y
+ select SERIAL_CORE_CONSOLE
+ default y
+ help
+ If you say Y here, it will be possible to use a serial port as the
+ system console (the system console is the device which receives all
+ kernel messages and warnings and which allows logins in single user
+ mode).
+
+ Note that the firmware uses ttyS1 as the serial console on the
+ Maxine and ttyS3 on the others using this driver.
+
+ If unsure, say Y.
+
+config SERIAL_21285
+ tristate "DC21285 serial port support"
+ depends on FOOTBRIDGE
+ select SERIAL_CORE
+ help
+ If you have a machine based on a 21285 (Footbridge) StrongARM(R)/
+ PCI bridge you can enable its onboard serial port by enabling this
+ option.
+
+config SERIAL_21285_CONSOLE
+ bool "Console on DC21285 serial port"
+ depends on SERIAL_21285=y
+ select SERIAL_CORE_CONSOLE
+ help
+ If you have enabled the serial port on the 21285 footbridge you can
+ make it the console by answering Y to this option.
+
+ Even if you say Y here, the currently visible virtual console
+ (/dev/tty0) will still be used as the system console by default, but
+ you can alter that using a kernel command line option such as
+ "console=ttyFB". (Try "man bootparam" or see the documentation of
+ your boot loader (lilo or loadlin) about how to pass options to the
+ kernel at boot time.)
+
+config SERIAL_PXA
+ bool "PXA serial port support (DEPRECATED)"
+ depends on ARCH_PXA || ARCH_MMP
+ select SERIAL_CORE
+ select SERIAL_8250_PXA if SERIAL_8250=y
+ select SERIAL_PXA_NON8250 if !SERIAL_8250=y
+ help
+ If you have a machine based on an Intel XScale PXA2xx CPU you
+ can enable its onboard serial ports by enabling this option.
+
+ Unless you have a specific need, you should use SERIAL_8250_PXA
+ instead of this.
+
+config SERIAL_PXA_NON8250
+ bool
+ depends on !SERIAL_8250 || COMPILE_TEST
+
+config SERIAL_PXA_CONSOLE
+ bool "Console on PXA serial port (DEPRECATED)"
+ depends on SERIAL_PXA
+ select SERIAL_CORE_CONSOLE
+ select SERIAL_8250_CONSOLE if SERIAL_8250=y
+ help
+ If you have enabled the serial port on the Intel XScale PXA
+ CPU you can make it the console by answering Y to this option.
+
+ Even if you say Y here, the currently visible virtual console
+ (/dev/tty0) will still be used as the system console by default, but
+ you can alter that using a kernel command line option such as
+ "console=ttySA0". (Try "man bootparam" or see the documentation of
+ your boot loader (lilo or loadlin) about how to pass options to the
+ kernel at boot time.)
+
+ Unless you have a specific need, you should use SERIAL_8250_PXA
+ and SERIAL_8250_CONSOLE instead of this.
+
+config SERIAL_SA1100
+ bool "SA1100 serial port support"
+ depends on ARCH_SA1100
+ select SERIAL_CORE
+ select SERIAL_MCTRL_GPIO if GPIOLIB
+ help
+ If you have a machine based on a SA1100/SA1110 StrongARM(R) CPU you
+ can enable its onboard serial port by enabling this option.
+ Please read <file:Documentation/arm/sa1100/serial_uart.rst> for further
+ info.
+
+config SERIAL_SA1100_CONSOLE
+ bool "Console on SA1100 serial port"
+ depends on SERIAL_SA1100
+ select SERIAL_CORE_CONSOLE
+ help
+ If you have enabled the serial port on the SA1100/SA1110 StrongARM
+ CPU you can make it the console by answering Y to this option.
+
+ Even if you say Y here, the currently visible virtual console
+ (/dev/tty0) will still be used as the system console by default, but
+ you can alter that using a kernel command line option such as
+ "console=ttySA0". (Try "man bootparam" or see the documentation of
+ your boot loader (lilo or loadlin) about how to pass options to the
+ kernel at boot time.)
+
+config SERIAL_IMX
+ tristate "IMX serial port support"
+ depends on ARCH_MXC || COMPILE_TEST
+ select SERIAL_CORE
+ select RATIONAL
+ select SERIAL_MCTRL_GPIO if GPIOLIB
+ help
+ If you have a machine based on a Motorola IMX CPU you
+ can enable its onboard serial port by enabling this option.
+
+config SERIAL_IMX_CONSOLE
+ tristate "Console on IMX serial port"
+ depends on SERIAL_IMX
+ select SERIAL_CORE_CONSOLE
+ help
+ If you have enabled the serial port on the Freescale IMX
+ CPU you can make it the console by answering Y/M to this option.
+
+ Even if you say Y/M here, the currently visible virtual console
+ (/dev/tty0) will still be used as the system console by default, but
+ you can alter that using a kernel command line option such as
+ "console=ttymxc0". (Try "man bootparam" or see the documentation of
+ your bootloader about how to pass options to the kernel at boot time.)
+
+config SERIAL_IMX_EARLYCON
+ bool "Earlycon on IMX serial port"
+ depends on ARCH_MXC || COMPILE_TEST
+ depends on OF
+ select SERIAL_CORE
+ select SERIAL_EARLYCON
+ select SERIAL_CORE_CONSOLE
+ default y if SERIAL_IMX_CONSOLE
+ help
+ If you have enabled the earlycon on the Freescale IMX
+ CPU you can make it the earlycon by answering Y to this option.
+
+config SERIAL_UARTLITE
+ tristate "Xilinx uartlite serial port support"
+ depends on HAS_IOMEM
+ select SERIAL_CORE
+ help
+ Say Y here if you want to use the Xilinx uartlite serial controller.
+
+ To compile this driver as a module, choose M here: the
+ module will be called uartlite.
+
+config SERIAL_UARTLITE_CONSOLE
+ bool "Support for console on Xilinx uartlite serial port"
+ depends on SERIAL_UARTLITE=y
+ select SERIAL_CORE_CONSOLE
+ select SERIAL_EARLYCON
+ help
+ Say Y here if you wish to use a Xilinx uartlite as the system
+ console (the system console is the device which receives all kernel
+ messages and warnings and which allows logins in single user mode).
+
+config SERIAL_UARTLITE_NR_UARTS
+ int "Maximum number of uartlite serial ports"
+ depends on SERIAL_UARTLITE
+ range 1 256
+ default 1
+ help
+ Set this to the number of uartlites in your system, or the number
+ you think you might implement.
+
+config SERIAL_SUNCORE
+ bool
+ depends on SPARC
+ select SERIAL_CORE
+ select SERIAL_CORE_CONSOLE
+ default y
+
+config SERIAL_SUNZILOG
+ tristate "Sun Zilog8530 serial support"
+ depends on SPARC
+ help
+ This driver supports the Zilog8530 serial ports found on many Sparc
+ systems. Say Y or M if you want to be able to these serial ports.
+
+config SERIAL_SUNZILOG_CONSOLE
+ bool "Console on Sun Zilog8530 serial port"
+ depends on SERIAL_SUNZILOG=y
+ help
+ If you would like to be able to use the Zilog8530 serial port
+ on your Sparc system as the console, you can do so by answering
+ Y to this option.
+
+config SERIAL_SUNSU
+ tristate "Sun SU serial support"
+ depends on SPARC && PCI
+ help
+ This driver supports the 8250 serial ports that run the keyboard and
+ mouse on (PCI) UltraSPARC systems. Say Y or M if you want to be able
+ to these serial ports.
+
+config SERIAL_SUNSU_CONSOLE
+ bool "Console on Sun SU serial port"
+ depends on SERIAL_SUNSU=y
+ help
+ If you would like to be able to use the SU serial port
+ on your Sparc system as the console, you can do so by answering
+ Y to this option.
+
+config SERIAL_MUX
+ tristate "Serial MUX support"
+ depends on GSC
+ select SERIAL_CORE
+ default y
+ help
+ Saying Y here will enable the hardware MUX serial driver for
+ the Nova, K class systems and D class with a 'remote control card'.
+ The hardware MUX is not 8250/16550 compatible therefore the
+ /dev/ttyB0 device is shared between the Serial MUX and the PDC
+ software console. The following steps need to be completed to use
+ the Serial MUX:
+
+ 1. create the device entry (mknod /dev/ttyB0 c 11 0)
+ 2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0
+ 3. Add device ttyB0 to /etc/securetty (if you want to log on as
+ root on this console.)
+ 4. Change the kernel command console parameter to: console=ttyB0
+
+config SERIAL_MUX_CONSOLE
+ bool "Support for console on serial MUX"
+ depends on SERIAL_MUX=y
+ select SERIAL_CORE_CONSOLE
+ default y
+
+config SERIAL_SUNSAB
+ tristate "Sun Siemens SAB82532 serial support"
+ depends on SPARC && PCI
+ help
+ This driver supports the Siemens SAB82532 DUSCC serial ports on newer
+ (PCI) UltraSPARC systems. Say Y or M if you want to be able to these
+ serial ports.
+
+config SERIAL_SUNSAB_CONSOLE
+ bool "Console on Sun Siemens SAB82532 serial port"
+ depends on SERIAL_SUNSAB=y
+ help
+ If you would like to be able to use the SAB82532 serial port
+ on your Sparc system as the console, you can do so by answering
+ Y to this option.
+
+config SERIAL_SUNHV
+ bool "Sun4v Hypervisor Console support"
+ depends on SPARC64
+ help
+ This driver supports the console device found on SUN4V Sparc
+ systems. Say Y if you want to be able to use this device.
+
+config SERIAL_IP22_ZILOG
+ tristate "SGI Zilog8530 serial support"
+ depends on SGI_HAS_ZILOG
+ select SERIAL_CORE
+ help
+ This driver supports the Zilog8530 serial ports found on SGI
+ systems. Say Y or M if you want to be able to these serial ports.
+
+config SERIAL_IP22_ZILOG_CONSOLE
+ bool "Console on SGI Zilog8530 serial port"
+ depends on SERIAL_IP22_ZILOG=y
+ select SERIAL_CORE_CONSOLE
+
+config SERIAL_SH_SCI
+ tristate "SuperH SCI(F) serial port support"
+ depends on SUPERH || ARCH_RENESAS || COMPILE_TEST
+ select SERIAL_CORE
+ select SERIAL_MCTRL_GPIO if GPIOLIB
+
+config SERIAL_SH_SCI_NR_UARTS
+ int "Maximum number of SCI(F) serial ports" if EXPERT
+ range 1 64 if 64BIT
+ range 1 32 if !64BIT
+ depends on SERIAL_SH_SCI
+ default "10" if SUPERH
+ default "18" if ARCH_RENESAS
+ default "2"
+
+config SERIAL_SH_SCI_CONSOLE
+ bool "Support for console on SuperH SCI(F)" if EXPERT
+ depends on SERIAL_SH_SCI=y
+ select SERIAL_CORE_CONSOLE
+ default y
+
+config SERIAL_SH_SCI_EARLYCON
+ bool "Support for early console on SuperH SCI(F)" if EXPERT
+ depends on SERIAL_SH_SCI=y
+ select SERIAL_CORE_CONSOLE
+ select SERIAL_EARLYCON
+ default ARCH_RENESAS
+
+config SERIAL_SH_SCI_DMA
+ bool "DMA support" if EXPERT
+ depends on SERIAL_SH_SCI && DMA_ENGINE
+ default ARCH_RENESAS
+
+config SERIAL_HS_LPC32XX
+ tristate "LPC32XX high speed serial port support"
+ depends on ARCH_LPC32XX || COMPILE_TEST
+ depends on OF
+ select SERIAL_CORE
+ help
+ Support for the LPC32XX high speed serial ports (up to 900kbps).
+ Those are UARTs completely different from the Standard UARTs on the
+ LPC32XX SoC.
+ Choose M or Y here to build this driver.
+
+config SERIAL_HS_LPC32XX_CONSOLE
+ bool "Enable LPC32XX high speed UART serial console"
+ depends on SERIAL_HS_LPC32XX=y
+ select SERIAL_CORE_CONSOLE
+ help
+ If you would like to be able to use one of the high speed serial
+ ports on the LPC32XX as the console, you can do so by answering
+ Y to this option.
+
+config SERIAL_CORE
+ tristate
+
+config SERIAL_CORE_CONSOLE
+ bool
+
+config CONSOLE_POLL
+ bool
+
+config SERIAL_MCF
+ bool "Coldfire serial support"
+ depends on COLDFIRE
+ select SERIAL_CORE
+ help
+ This serial driver supports the Freescale Coldfire serial ports.
+
+config SERIAL_MCF_BAUDRATE
+ int "Default baudrate for Coldfire serial ports"
+ depends on SERIAL_MCF
+ default 19200
+ help
+ This setting lets you define what the default baudrate is for the
+ ColdFire serial ports. The usual default varies from board to board,
+ and this setting is a way of catering for that.
+
+config SERIAL_MCF_CONSOLE
+ bool "Coldfire serial console support"
+ depends on SERIAL_MCF
+ select SERIAL_CORE_CONSOLE
+ help
+ Enable a ColdFire internal serial port to be the system console.
+
+config SERIAL_PMACZILOG
+ tristate "Mac or PowerMac z85c30 ESCC support"
+ depends on (M68K && MAC) || PPC_PMAC
+ select SERIAL_CORE
+ help
+ This driver supports the Zilog z85C30 serial ports found on
+ (Power)Mac machines.
+ Say Y or M if you want to be able to these serial ports.
+
+config SERIAL_PMACZILOG_TTYS
+ bool "Use ttySn device nodes for Zilog z85c30"
+ depends on SERIAL_PMACZILOG
+ help
+ The pmac_zilog driver for the z85C30 chip on many powermacs
+ historically used the device numbers for /dev/ttySn. The
+ 8250 serial port driver also uses these numbers, which means
+ the two drivers being unable to coexist; you could not use
+ both z85C30 and 8250 type ports at the same time.
+
+ If this option is not selected, the pmac_zilog driver will
+ use the device numbers allocated for /dev/ttyPZn. This allows
+ the pmac_zilog and 8250 drivers to co-exist, but may cause
+ existing userspace setups to break. Programs that need to
+ access the built-in serial ports on powermacs will need to
+ be reconfigured to use /dev/ttyPZn instead of /dev/ttySn.
+
+ If you enable this option, any z85c30 ports in the system will
+ be registered as ttyS0 onwards as in the past, and you will be
+ unable to use the 8250 module for PCMCIA or other 16C550-style
+ UARTs.
+
+ Say N unless you need the z85c30 ports on your (Power)Mac
+ to appear as /dev/ttySn.
+
+config SERIAL_PMACZILOG_CONSOLE
+ bool "Console on Mac or PowerMac z85c30 serial port"
+ depends on SERIAL_PMACZILOG=y
+ select SERIAL_CORE_CONSOLE
+ help
+ If you would like to be able to use the z85c30 serial port
+ on your (Power)Mac as the console, you can do so by answering
+ Y to this option.
+
+config SERIAL_CPM
+ tristate "CPM SCC/SMC serial port support"
+ depends on CPM2 || CPM1
+ select SERIAL_CORE
+ help
+ This driver supports the SCC and SMC serial ports on Motorola
+ embedded PowerPC that contain a CPM1 (8xx) or CPM2 (8xxx)
+
+config SERIAL_CPM_CONSOLE
+ bool "Support for console on CPM SCC/SMC serial port"
+ depends on SERIAL_CPM=y
+ select SERIAL_CORE_CONSOLE
+ help
+ Say Y here if you wish to use a SCC or SMC CPM UART as the system
+ console (the system console is the device which receives all kernel
+ messages and warnings and which allows logins in single user mode).
+
+ Even if you say Y here, the currently visible framebuffer console
+ (/dev/tty0) will still be used as the system console by default, but
+ you can alter that using a kernel command line option such as
+ "console=ttyCPM0". (Try "man bootparam" or see the documentation of
+ your boot loader (lilo or loadlin) about how to pass options to the
+ kernel at boot time.)
+
+config SERIAL_PIC32
+ tristate "Microchip PIC32 serial support"
+ depends on MACH_PIC32 || (MIPS && COMPILE_TEST)
+ select SERIAL_CORE
+ help
+ If you have a PIC32, this driver supports the serial ports.
+
+ Say Y or M to use PIC32 serial ports, otherwise say N. Note that
+ to use a serial port as a console, this must be included in kernel and
+ not as a module.
+
+config SERIAL_PIC32_CONSOLE
+ bool "PIC32 serial console support"
+ depends on SERIAL_PIC32=y
+ select SERIAL_CORE_CONSOLE
+ help
+ If you have a PIC32, this driver supports the putting a console on one
+ of the serial ports.
+
+ Say Y to use the PIC32 console, otherwise say N.
+
+config SERIAL_MPC52xx
+ tristate "Freescale MPC52xx/MPC512x family PSC serial support"
+ depends on PPC_MPC52xx || PPC_MPC512x
+ select SERIAL_CORE
+ help
+ This driver supports MPC52xx and MPC512x PSC serial ports. If you would
+ like to use them, you must answer Y or M to this option. Note that
+ for use as console, it must be included in kernel and not as a
+ module.
+
+config SERIAL_MPC52xx_CONSOLE
+ bool "Console on a Freescale MPC52xx/MPC512x family PSC serial port"
+ depends on SERIAL_MPC52xx=y
+ select SERIAL_CORE_CONSOLE
+ help
+ Select this options if you'd like to use one of the PSC serial port
+ of the Freescale MPC52xx family as a console.
+
+config SERIAL_MPC52xx_CONSOLE_BAUD
+ int "Freescale MPC52xx/MPC512x family PSC serial port baud"
+ depends on SERIAL_MPC52xx_CONSOLE=y
+ default "9600"
+ help
+ Select the MPC52xx console baud rate.
+ This value is only used if the bootloader doesn't pass in the
+ console baudrate
+
+config SERIAL_ICOM
+ tristate "IBM Multiport Serial Adapter"
+ depends on PCI
+ depends on PPC_PSERIES || COMPILE_TEST
+ select SERIAL_CORE
+ select FW_LOADER
+ help
+ This driver is for a family of multiport serial adapters
+ including 2 port RVX, 2 port internal modem, 4 port internal
+ modem and a split 1 port RVX and 1 port internal modem.
+
+ This driver can also be built as a module. If so, the module
+ will be called icom.
+
+config SERIAL_TXX9
+ bool "TMPTX39XX/49XX SIO support"
+ depends on HAS_TXX9_SERIAL
+ select SERIAL_CORE
+ default y
+
+config HAS_TXX9_SERIAL
+ bool
+
+config SERIAL_TXX9_NR_UARTS
+ int "Maximum number of TMPTX39XX/49XX SIO ports"
+ depends on SERIAL_TXX9
+ default "6"
+
+config SERIAL_TXX9_CONSOLE
+ bool "TMPTX39XX/49XX SIO Console support"
+ depends on SERIAL_TXX9=y
+ select SERIAL_CORE_CONSOLE
+
+config SERIAL_TXX9_STDSERIAL
+ bool "TX39XX/49XX SIO act as standard serial"
+ depends on !SERIAL_8250 && SERIAL_TXX9
+
+config SERIAL_JSM
+ tristate "Digi International NEO and Classic PCI Support"
+ depends on PCI
+ select SERIAL_CORE
+ help
+ This is a driver for Digi International's Neo and Classic series
+ of cards which provide multiple serial ports. You would need
+ something like this to connect more than two modems to your Linux
+ box, for instance in order to become a dial-in server. This driver
+ supports PCI boards only.
+
+ If you have a card like this, say Y here, otherwise say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called jsm.
+
+config SERIAL_MSM
+ tristate "MSM on-chip serial port support"
+ depends on ARCH_QCOM || COMPILE_TEST
+ select SERIAL_CORE
+
+config SERIAL_MSM_CONSOLE
+ bool "MSM serial console support"
+ depends on SERIAL_MSM=y
+ select SERIAL_CORE_CONSOLE
+ select SERIAL_EARLYCON
+
+config SERIAL_QCOM_GENI
+ tristate "QCOM on-chip GENI based serial port support"
+ depends on ARCH_QCOM || COMPILE_TEST
+ depends on QCOM_GENI_SE
+ select SERIAL_CORE
+
+config SERIAL_QCOM_GENI_CONSOLE
+ bool "QCOM GENI Serial Console support"
+ depends on SERIAL_QCOM_GENI
+ select SERIAL_CORE_CONSOLE
+ select SERIAL_EARLYCON
+ help
+ Serial console driver for Qualcomm Technologies Inc's GENI based
+ QUP hardware.
+
+config SERIAL_VT8500
+ bool "VIA VT8500 on-chip serial port support"
+ depends on ARCH_VT8500 || COMPILE_TEST
+ select SERIAL_CORE
+
+config SERIAL_VT8500_CONSOLE
+ bool "VIA VT8500 serial console support"
+ depends on SERIAL_VT8500=y
+ select SERIAL_CORE_CONSOLE
+
+config SERIAL_OMAP
+ tristate "OMAP serial port support"
+ depends on (ARCH_OMAP2PLUS && !SERIAL_8250_OMAP) || COMPILE_TEST
+ select SERIAL_CORE
+ help
+ If you have a machine based on an Texas Instruments OMAP CPU you
+ can enable its onboard serial ports by enabling this option.
+
+ By enabling this option you take advantage of dma feature available
+ with the omap-serial driver. DMA support can be enabled from platform
+ data.
+
+config SERIAL_OMAP_CONSOLE
+ bool "Console on OMAP serial port"
+ depends on SERIAL_OMAP=y
+ select SERIAL_CORE_CONSOLE
+ help
+ Select this option if you would like to use omap serial port as
+ console.
+
+ Even if you say Y here, the currently visible virtual console
+ (/dev/tty0) will still be used as the system console by default, but
+ you can alter that using a kernel command line option such as
+ "console=ttyOx". (Try "man bootparam" or see the documentation of
+ your boot loader about how to pass options to the kernel at
+ boot time.)
+
+config SERIAL_SIFIVE
+ tristate "SiFive UART support"
+ depends on OF
+ select SERIAL_CORE
+ help
+ Select this option if you are building a kernel for a device that
+ contains a SiFive UART IP block. This type of UART is present on
+ SiFive FU540 SoCs, among others.
+
+config SERIAL_SIFIVE_CONSOLE
+ bool "Console on SiFive UART"
+ depends on SERIAL_SIFIVE=y
+ select SERIAL_CORE_CONSOLE
+ select SERIAL_EARLYCON
+ help
+ Select this option if you would like to use a SiFive UART as the
+ system console.
+
+ Even if you say Y here, the currently visible virtual console
+ (/dev/tty0) will still be used as the system console by default, but
+ you can alter that using a kernel command line option such as
+ "console=ttySIFx". (Try "man bootparam" or see the documentation of
+ your boot loader about how to pass options to the kernel at
+ boot time.)
+
+config SERIAL_LANTIQ
+ tristate "Lantiq serial driver"
+ depends on (LANTIQ || X86) || COMPILE_TEST
+ select SERIAL_CORE
+ help
+ Support for UART on Lantiq and Intel SoCs.
+ To compile this driver as a module, select M here. The
+ module will be called lantiq.
+
+config SERIAL_LANTIQ_CONSOLE
+ bool "Console on Lantiq UART"
+ depends on SERIAL_LANTIQ=y
+ select SERIAL_CORE_CONSOLE
+ select SERIAL_EARLYCON
+ help
+ Select this option if you would like to use a Lantiq UART as the
+ system console.
+
+config SERIAL_QE
+ tristate "Freescale QUICC Engine serial port support"
+ depends on QUICC_ENGINE
+ select SERIAL_CORE
+ select FW_LOADER
+ help
+ This driver supports the QE serial ports on Freescale embedded
+ PowerPC that contain a QUICC Engine.
+
+config SERIAL_SCCNXP
+ tristate "SCCNXP serial port support"
+ select SERIAL_CORE
+ help
+ This selects support for an advanced UART from NXP (Philips).
+ Supported ICs are SCC2681, SCC2691, SCC2692, SC28L91, SC28L92,
+ SC28L202, SCC68681 and SCC68692.
+
+config SERIAL_SCCNXP_CONSOLE
+ bool "Console on SCCNXP serial port"
+ depends on SERIAL_SCCNXP=y
+ select SERIAL_CORE_CONSOLE
+ help
+ Support for console on SCCNXP serial ports.
+
+config SERIAL_SC16IS7XX_CORE
+ tristate
+
+config SERIAL_SC16IS7XX
+ tristate "SC16IS7xx serial support"
+ select SERIAL_CORE
+ depends on (SPI_MASTER && !I2C) || I2C
+ help
+ This selects support for SC16IS7xx serial ports.
+ Supported ICs are SC16IS740, SC16IS741, SC16IS750, SC16IS752,
+ SC16IS760 and SC16IS762. Select supported buses using options below.
+
+config SERIAL_SC16IS7XX_I2C
+ bool "SC16IS7xx for I2C interface"
+ depends on SERIAL_SC16IS7XX
+ depends on I2C
+ select SERIAL_SC16IS7XX_CORE if SERIAL_SC16IS7XX
+ select REGMAP_I2C if I2C
+ default y
+ help
+ Enable SC16IS7xx driver on I2C bus,
+ If required say y, and say n to i2c if not required,
+ Enabled by default to support oldconfig.
+ You must select at least one bus for the driver to be built.
+
+config SERIAL_SC16IS7XX_SPI
+ bool "SC16IS7xx for spi interface"
+ depends on SERIAL_SC16IS7XX
+ depends on SPI_MASTER
+ select SERIAL_SC16IS7XX_CORE if SERIAL_SC16IS7XX
+ select REGMAP_SPI if SPI_MASTER
+ help
+ Enable SC16IS7xx driver on SPI bus,
+ If required say y, and say n to spi if not required,
+ This is additional support to existing driver.
+ You must select at least one bus for the driver to be built.
+
+config SERIAL_TIMBERDALE
+ tristate "Support for timberdale UART"
+ select SERIAL_CORE
+ depends on X86_32 || COMPILE_TEST
+ help
+ Add support for UART controller on timberdale.
+
+config SERIAL_BCM63XX
+ tristate "Broadcom BCM63xx/BCM33xx UART support"
+ select SERIAL_CORE
+ depends on ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC || COMPILE_TEST
+ default ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC
+ help
+ This enables the driver for the onchip UART core found on
+ the following chipsets:
+
+ BCM33xx (cable modem)
+ BCM63xx/BCM63xxx (DSL)
+ BCM68xx (PON)
+ BCM7xxx (STB) - DOCSIS console
+
+config SERIAL_BCM63XX_CONSOLE
+ bool "Console on BCM63xx serial port"
+ depends on SERIAL_BCM63XX=y
+ select SERIAL_CORE_CONSOLE
+ select SERIAL_EARLYCON
+ help
+ If you have enabled the serial port on the BCM63xx CPU
+ you can make it the console by answering Y to this option.
+
+config SERIAL_GRLIB_GAISLER_APBUART
+ tristate "GRLIB APBUART serial support"
+ depends on OF && SPARC
+ select SERIAL_CORE
+ help
+ Add support for the GRLIB APBUART serial port.
+
+config SERIAL_GRLIB_GAISLER_APBUART_CONSOLE
+ bool "Console on GRLIB APBUART serial port"
+ depends on SERIAL_GRLIB_GAISLER_APBUART=y
+ select SERIAL_CORE_CONSOLE
+ help
+ Support for running a console on the GRLIB APBUART
+
+config SERIAL_ALTERA_JTAGUART
+ tristate "Altera JTAG UART support"
+ select SERIAL_CORE
+ help
+ This driver supports the Altera JTAG UART port.
+
+config SERIAL_ALTERA_JTAGUART_CONSOLE
+ bool "Altera JTAG UART console support"
+ depends on SERIAL_ALTERA_JTAGUART=y
+ select SERIAL_CORE_CONSOLE
+ select SERIAL_EARLYCON
+ help
+ Enable a Altera JTAG UART port to be the system console.
+
+config SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS
+ bool "Bypass output when no connection"
+ depends on SERIAL_ALTERA_JTAGUART_CONSOLE
+ select SERIAL_CORE_CONSOLE
+ help
+ Bypass console output and keep going even if there is no
+ JTAG terminal connection with the host.
+
+config SERIAL_ALTERA_UART
+ tristate "Altera UART support"
+ select SERIAL_CORE
+ help
+ This driver supports the Altera softcore UART port.
+
+config SERIAL_ALTERA_UART_MAXPORTS
+ int "Maximum number of Altera UART ports"
+ depends on SERIAL_ALTERA_UART
+ default 4
+ help
+ This setting lets you define the maximum number of the Altera
+ UART ports. The usual default varies from board to board, and
+ this setting is a way of catering for that.
+
+config SERIAL_ALTERA_UART_BAUDRATE
+ int "Default baudrate for Altera UART ports"
+ depends on SERIAL_ALTERA_UART
+ default 115200
+ help
+ This setting lets you define what the default baudrate is for the
+ Altera UART ports. The usual default varies from board to board,
+ and this setting is a way of catering for that.
+
+config SERIAL_ALTERA_UART_CONSOLE
+ bool "Altera UART console support"
+ depends on SERIAL_ALTERA_UART=y
+ select SERIAL_CORE_CONSOLE
+ select SERIAL_EARLYCON
+ help
+ Enable a Altera UART port to be the system console.
+
+config SERIAL_PCH_UART
+ tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) UART"
+ depends on PCI && (X86_32 || MIPS || COMPILE_TEST)
+ select SERIAL_CORE
+ help
+ This driver is for PCH(Platform controller Hub) UART of Intel EG20T
+ which is an IOH(Input/Output Hub) for x86 embedded processor.
+ Enabling PCH_DMA, this PCH UART works as DMA mode.
+
+ This driver also can be used for LAPIS Semiconductor IOH(Input/
+ Output Hub), ML7213, ML7223 and ML7831.
+ ML7213 IOH is for IVI(In-Vehicle Infotainment) use, ML7223 IOH is
+ for MP(Media Phone) use and ML7831 IOH is for general purpose use.
+ ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
+ ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH.
+
+config SERIAL_PCH_UART_CONSOLE
+ bool "Support for console on Intel EG20T PCH UART/OKI SEMICONDUCTOR ML7213 IOH"
+ depends on SERIAL_PCH_UART=y
+ select SERIAL_CORE_CONSOLE
+ help
+ Say Y here if you wish to use the PCH UART as the system console
+ (the system console is the device which receives all kernel messages and
+ warnings and which allows logins in single user mode).
+
+config SERIAL_MXS_AUART
+ tristate "MXS AUART support"
+ depends on ARCH_MXS || MACH_ASM9260 || COMPILE_TEST
+ select SERIAL_CORE
+ select SERIAL_MCTRL_GPIO if GPIOLIB
+ help
+ This driver supports the MXS and Alphascale ASM9260 Application
+ UART (AUART) port.
+
+config SERIAL_MXS_AUART_CONSOLE
+ bool "MXS AUART console support"
+ depends on SERIAL_MXS_AUART=y
+ select SERIAL_CORE_CONSOLE
+ help
+ Enable a MXS AUART port to be the system console.
+
+config SERIAL_XILINX_PS_UART
+ tristate "Cadence (Xilinx Zynq) UART support"
+ depends on OF
+ select SERIAL_CORE
+ help
+ This driver supports the Cadence UART. It is found e.g. in Xilinx
+ Zynq.
+
+config SERIAL_XILINX_PS_UART_CONSOLE
+ bool "Cadence UART console support"
+ depends on SERIAL_XILINX_PS_UART=y
+ select SERIAL_CORE_CONSOLE
+ select SERIAL_EARLYCON
+ help
+ Enable a Cadence UART port to be the system console.
+
+config SERIAL_AR933X
+ tristate "AR933X serial port support"
+ depends on (HAVE_CLK && ATH79) || (MIPS && COMPILE_TEST)
+ select SERIAL_CORE
+ select SERIAL_MCTRL_GPIO if GPIOLIB
+ help
+ If you have an Atheros AR933X SOC based board and want to use the
+ built-in UART of the SoC, say Y to this option.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ar933x_uart.
+
+config SERIAL_AR933X_CONSOLE
+ bool "Console on AR933X serial port"
+ depends on SERIAL_AR933X=y
+ select SERIAL_CORE_CONSOLE
+ help
+ Enable a built-in UART port of the AR933X to be the system console.
+
+config SERIAL_AR933X_NR_UARTS
+ int "Maximum number of AR933X serial ports"
+ depends on SERIAL_AR933X
+ default "2"
+ help
+ Set this to the number of serial ports you want the driver
+ to support.
+
+config SERIAL_MPS2_UART_CONSOLE
+ bool "MPS2 UART console support"
+ depends on SERIAL_MPS2_UART
+ select SERIAL_CORE_CONSOLE
+ select SERIAL_EARLYCON
+
+config SERIAL_MPS2_UART
+ bool "MPS2 UART port"
+ depends on ARCH_MPS2 || COMPILE_TEST
+ select SERIAL_CORE
+ help
+ This driver support the UART ports on ARM MPS2.
+
+config SERIAL_ARC
+ tristate "ARC UART driver support"
+ select SERIAL_CORE
+ help
+ Driver for on-chip UART for ARC(Synopsys) for the legacy
+ FPGA Boards (ML50x/ARCAngel4)
+
+config SERIAL_ARC_CONSOLE
+ bool "Console on ARC UART"
+ depends on SERIAL_ARC=y
+ select SERIAL_CORE_CONSOLE
+ select SERIAL_EARLYCON
+ help
+ Enable system Console on ARC UART
+
+config SERIAL_ARC_NR_PORTS
+ int "Number of ARC UART ports"
+ depends on SERIAL_ARC
+ range 1 3
+ default "1"
+ help
+ Set this to the number of serial ports you want the driver
+ to support.
+
+config SERIAL_RP2
+ tristate "Comtrol RocketPort EXPRESS/INFINITY support"
+ depends on PCI
+ select SERIAL_CORE
+ help
+ This driver supports the Comtrol RocketPort EXPRESS and
+ RocketPort INFINITY families of PCI/PCIe multiport serial adapters.
+ These adapters use a "RocketPort 2" ASIC that is not compatible
+ with the original RocketPort driver (CONFIG_ROCKETPORT).
+
+ To compile this driver as a module, choose M here: the
+ module will be called rp2.
+
+ If you want to compile this driver into the kernel, say Y here. If
+ you don't have a suitable RocketPort card installed, say N.
+
+config SERIAL_RP2_NR_UARTS
+ int "Maximum number of RocketPort EXPRESS/INFINITY ports"
+ depends on SERIAL_RP2
+ default "32"
+ help
+ If multiple cards are present, the default limit of 32 ports may
+ need to be increased.
+
+config SERIAL_FSL_LPUART
+ tristate "Freescale lpuart serial port support"
+ depends on HAS_DMA
+ select SERIAL_CORE
+ help
+ Support for the on-chip lpuart on some Freescale SOCs.
+
+config SERIAL_FSL_LPUART_CONSOLE
+ bool "Console on Freescale lpuart serial port"
+ depends on SERIAL_FSL_LPUART=y
+ select SERIAL_CORE_CONSOLE
+ select SERIAL_EARLYCON
+ help
+ If you have enabled the lpuart serial port on the Freescale SoCs,
+ you can make it the console by answering Y to this option.
+
+config SERIAL_FSL_LINFLEXUART
+ tristate "Freescale LINFlexD UART serial port support"
+ depends on PRINTK
+ select SERIAL_CORE
+ help
+ Support for the on-chip LINFlexD UART on some Freescale SOCs.
+
+config SERIAL_FSL_LINFLEXUART_CONSOLE
+ bool "Console on Freescale LINFlexD UART serial port"
+ depends on SERIAL_FSL_LINFLEXUART=y
+ select SERIAL_CORE_CONSOLE
+ select SERIAL_EARLYCON
+ help
+ If you have enabled the LINFlexD UART serial port on the Freescale
+ SoCs, you can make it the console by answering Y to this option.
+
+config SERIAL_CONEXANT_DIGICOLOR
+ tristate "Conexant Digicolor CX92xxx USART serial port support"
+ depends on OF
+ select SERIAL_CORE
+ help
+ Support for the on-chip USART on Conexant Digicolor SoCs.
+
+config SERIAL_CONEXANT_DIGICOLOR_CONSOLE
+ bool "Console on Conexant Digicolor serial port"
+ depends on SERIAL_CONEXANT_DIGICOLOR=y
+ select SERIAL_CORE_CONSOLE
+ help
+ If you have enabled the USART serial port on Conexant Digicolor
+ SoCs, you can make it the console by answering Y to this option.
+
+config SERIAL_ST_ASC
+ tristate "ST ASC serial port support"
+ select SERIAL_CORE
+ depends on ARM || COMPILE_TEST
+ help
+ This driver is for the on-chip Asynchronous Serial Controller on
+ STMicroelectronics STi SoCs.
+ ASC is embedded in ST COMMS IP block. It supports Rx & Tx functionality.
+ It support all industry standard baud rates.
+
+ If unsure, say N.
+
+config SERIAL_ST_ASC_CONSOLE
+ bool "Support for console on ST ASC"
+ depends on SERIAL_ST_ASC=y
+ select SERIAL_CORE_CONSOLE
+
+config SERIAL_MEN_Z135
+ tristate "MEN 16z135 Support"
+ select SERIAL_CORE
+ depends on MCB
+ help
+ Say yes here to enable support for the MEN 16z135 High Speed UART IP-Core
+ on a MCB carrier.
+
+ This driver can also be build as a module. If so, the module will be called
+ men_z135_uart.ko
+
+config SERIAL_SPRD
+ tristate "Support for Spreadtrum serial"
+ select SERIAL_CORE
+ depends on COMMON_CLK
+ help
+ This enables the driver for the Spreadtrum's serial.
+
+config SERIAL_SPRD_CONSOLE
+ bool "Spreadtrum UART console support"
+ depends on SERIAL_SPRD=y
+ select SERIAL_CORE_CONSOLE
+ select SERIAL_EARLYCON
+ help
+ Support for early debug console using Spreadtrum's serial. This enables
+ the console before standard serial driver is probed. This is enabled
+ with "earlycon" on the kernel command line. The console is
+ enabled when early_param is processed.
+
+config SERIAL_STM32
+ tristate "STMicroelectronics STM32 serial port support"
+ select SERIAL_CORE
+ depends on ARCH_STM32 || COMPILE_TEST
+ select SERIAL_MCTRL_GPIO if GPIOLIB
+ help
+ This driver is for the on-chip Serial Controller on
+ STMicroelectronics STM32 MCUs.
+ USART supports Rx & Tx functionality.
+ It support all industry standard baud rates.
+
+ If unsure, say N.
+
+config SERIAL_STM32_CONSOLE
+ bool "Support for console on STM32"
+ depends on SERIAL_STM32=y
+ select SERIAL_CORE_CONSOLE
+ select SERIAL_EARLYCON
+
+config SERIAL_MVEBU_UART
+ bool "Marvell EBU serial port support"
+ depends on ARCH_MVEBU || COMPILE_TEST
+ depends on COMMON_CLK
+ select SERIAL_CORE
+ help
+ This driver is for Marvell EBU SoC's UART. If you have a machine
+ based on the Armada-3700 SoC and wish to use the on-board serial
+ port,
+ say 'Y' here.
+ Otherwise, say 'N'.
+
+config SERIAL_MVEBU_CONSOLE
+ bool "Console on Marvell EBU serial port"
+ depends on SERIAL_MVEBU_UART
+ select SERIAL_CORE_CONSOLE
+ select SERIAL_EARLYCON
+ default y
+ help
+ Say 'Y' here if you wish to use Armada-3700 UART as the system console.
+ (the system console is the device which receives all kernel messages
+ and warnings and which allows logins in single user mode)
+ Otherwise, say 'N'.
+
+config SERIAL_OWL
+ tristate "Actions Semi Owl serial port support"
+ depends on ARCH_ACTIONS || COMPILE_TEST
+ select SERIAL_CORE
+ help
+ This driver is for Actions Semiconductor S500/S900 SoC's UART.
+ Say 'Y' here if you wish to use the on-board serial port.
+ Otherwise, say 'N'.
+
+config SERIAL_OWL_CONSOLE
+ bool "Console on Actions Semi Owl serial port"
+ depends on SERIAL_OWL=y
+ select SERIAL_CORE_CONSOLE
+ select SERIAL_EARLYCON
+ default y
+ help
+ Say 'Y' here if you wish to use Actions Semiconductor S500/S900 UART
+ as the system console.
+
+config SERIAL_RDA
+ bool "RDA Micro serial port support"
+ depends on ARCH_RDA || COMPILE_TEST
+ select SERIAL_CORE
+ help
+ This driver is for RDA8810PL SoC's UART.
+ Say 'Y' here if you wish to use the on-board serial port.
+ Otherwise, say 'N'.
+
+config SERIAL_RDA_CONSOLE
+ bool "Console on RDA Micro serial port"
+ depends on SERIAL_RDA=y
+ select SERIAL_CORE_CONSOLE
+ select SERIAL_EARLYCON
+ default y
+ help
+ Say 'Y' here if you wish to use the RDA8810PL UART as the system
+ console. Only earlycon is implemented currently.
+
+config SERIAL_MILBEAUT_USIO
+ tristate "Milbeaut USIO/UART serial port support"
+ depends on ARCH_MILBEAUT || (COMPILE_TEST && OF)
+ default ARCH_MILBEAUT
+ select SERIAL_CORE
+ help
+ This selects the USIO/UART IP found in Socionext Milbeaut SoCs.
+
+config SERIAL_MILBEAUT_USIO_PORTS
+ int "Maximum number of CSIO/UART ports (1-8)"
+ range 1 8
+ depends on SERIAL_MILBEAUT_USIO
+ default "4"
+
+config SERIAL_MILBEAUT_USIO_CONSOLE
+ bool "Support for console on MILBEAUT USIO/UART serial port"
+ depends on SERIAL_MILBEAUT_USIO=y
+ default y
+ select SERIAL_CORE_CONSOLE
+ select SERIAL_EARLYCON
+ help
+ Say 'Y' here if you wish to use a USIO/UART of Socionext Milbeaut
+ SoCs as the system console (the system console is the device which
+ receives all kernel messages and warnings and which allows logins in
+ single user mode).
+
+config SERIAL_LITEUART
+ tristate "LiteUART serial port support"
+ depends on HAS_IOMEM
+ depends on OF || COMPILE_TEST
+ depends on LITEX || COMPILE_TEST
+ select SERIAL_CORE
+ help
+ This driver is for the FPGA-based LiteUART serial controller from LiteX
+ SoC builder.
+
+ Say 'Y' or 'M' here if you wish to use the LiteUART serial controller.
+ Otherwise, say 'N'.
+
+config SERIAL_LITEUART_MAX_PORTS
+ int "Maximum number of LiteUART ports"
+ depends on SERIAL_LITEUART
+ default "1"
+ help
+ Set this to the maximum number of serial ports you want the driver
+ to support.
+
+config SERIAL_LITEUART_CONSOLE
+ bool "LiteUART serial port console support"
+ depends on SERIAL_LITEUART=y
+ select SERIAL_CORE_CONSOLE
+ select SERIAL_EARLYCON
+ help
+ Say 'Y' or 'M' here if you wish to use the FPGA-based LiteUART serial
+ controller from LiteX SoC builder as the system console
+ (the system console is the device which receives all kernel messages
+ and warnings and which allows logins in single user mode).
+ Otherwise, say 'N'.
+
+config SERIAL_SUNPLUS
+ tristate "Sunplus UART support"
+ depends on ARCH_SUNPLUS || COMPILE_TEST
+ select SERIAL_CORE
+ help
+ Select this option if you would like to use Sunplus serial port on
+ Sunplus SoC SP7021.
+ If you enable this option, Sunplus serial ports in the system will
+ be registered as ttySUPx.
+ This driver can also be built as a module. If so, the module will be
+ called sunplus-uart.
+
+config SERIAL_SUNPLUS_CONSOLE
+ bool "Console on Sunplus UART"
+ depends on SERIAL_SUNPLUS
+ select SERIAL_CORE_CONSOLE
+ select SERIAL_EARLYCON
+ help
+ Select this option if you would like to use a Sunplus UART as the
+ system console.
+ Even if you say Y here, the currently visible virtual console
+ (/dev/tty0) will still be used as the system console by default, but
+ you can alter that using a kernel command line option such as
+ "console=ttySUPx".
+
+endmenu
+
+config SERIAL_MCTRL_GPIO
+ tristate