diff options
Diffstat (limited to 'drivers/tty/serial/qcom_geni_serial.c')
| -rw-r--r-- | drivers/tty/serial/qcom_geni_serial.c | 1615 |
1 files changed, 1615 insertions, 0 deletions
diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c new file mode 100644 index 000000000..d6f682ed1 --- /dev/null +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -0,0 +1,1615 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2017-2018, The Linux foundation. All rights reserved. + +/* Disable MMIO tracing to prevent excessive logging of unwanted MMIO traces */ +#define __DISABLE_TRACE_MMIO__ + +#include <linux/clk.h> +#include <linux/console.h> +#include <linux/io.h> +#include <linux/iopoll.h> +#include <linux/irq.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/pm_opp.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/pm_wakeirq.h> +#include <linux/qcom-geni-se.h> +#include <linux/serial.h> +#include <linux/serial_core.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <dt-bindings/interconnect/qcom,icc.h> + +/* UART specific GENI registers */ +#define SE_UART_LOOPBACK_CFG 0x22c +#define SE_UART_IO_MACRO_CTRL 0x240 +#define SE_UART_TX_TRANS_CFG 0x25c +#define SE_UART_TX_WORD_LEN 0x268 +#define SE_UART_TX_STOP_BIT_LEN 0x26c +#define SE_UART_TX_TRANS_LEN 0x270 +#define SE_UART_RX_TRANS_CFG 0x280 +#define SE_UART_RX_WORD_LEN 0x28c +#define SE_UART_RX_STALE_CNT 0x294 +#define SE_UART_TX_PARITY_CFG 0x2a4 +#define SE_UART_RX_PARITY_CFG 0x2a8 +#define SE_UART_MANUAL_RFR 0x2ac + +/* SE_UART_TRANS_CFG */ +#define UART_TX_PAR_EN BIT(0) +#define UART_CTS_MASK BIT(1) + +/* SE_UART_TX_WORD_LEN */ +#define TX_WORD_LEN_MSK GENMASK(9, 0) + +/* SE_UART_TX_STOP_BIT_LEN */ +#define TX_STOP_BIT_LEN_MSK GENMASK(23, 0) +#define TX_STOP_BIT_LEN_1 0 +#define TX_STOP_BIT_LEN_1_5 1 +#define TX_STOP_BIT_LEN_2 2 + +/* SE_UART_TX_TRANS_LEN */ +#define TX_TRANS_LEN_MSK GENMASK(23, 0) + +/* SE_UART_RX_TRANS_CFG */ +#define UART_RX_INS_STATUS_BIT BIT(2) +#define UART_RX_PAR_EN BIT(3) + +/* SE_UART_RX_WORD_LEN */ +#define RX_WORD_LEN_MASK GENMASK(9, 0) + +/* SE_UART_RX_STALE_CNT */ +#define RX_STALE_CNT GENMASK(23, 0) + +/* SE_UART_TX_PARITY_CFG/RX_PARITY_CFG */ +#define PAR_CALC_EN BIT(0) +#define PAR_MODE_MSK GENMASK(2, 1) +#define PAR_MODE_SHFT 1 +#define PAR_EVEN 0x00 +#define PAR_ODD 0x01 +#define PAR_SPACE 0x10 +#define PAR_MARK 0x11 + +/* SE_UART_MANUAL_RFR register fields */ +#define UART_MANUAL_RFR_EN BIT(31) +#define UART_RFR_NOT_READY BIT(1) +#define UART_RFR_READY BIT(0) + +/* UART M_CMD OP codes */ +#define UART_START_TX 0x1 +#define UART_START_BREAK 0x4 +#define UART_STOP_BREAK 0x5 +/* UART S_CMD OP codes */ +#define UART_START_READ 0x1 +#define UART_PARAM 0x1 + +#define UART_OVERSAMPLING 32 +#define STALE_TIMEOUT 16 +#define DEFAULT_BITS_PER_CHAR 10 +#define GENI_UART_CONS_PORTS 1 +#define GENI_UART_PORTS 3 +#define DEF_FIFO_DEPTH_WORDS 16 +#define DEF_TX_WM 2 +#define DEF_FIFO_WIDTH_BITS 32 +#define UART_RX_WM 2 + +/* SE_UART_LOOPBACK_CFG */ +#define RX_TX_SORTED BIT(0) +#define CTS_RTS_SORTED BIT(1) +#define RX_TX_CTS_RTS_SORTED (RX_TX_SORTED | CTS_RTS_SORTED) + +/* UART pin swap value */ +#define DEFAULT_IO_MACRO_IO0_IO1_MASK GENMASK(3, 0) +#define IO_MACRO_IO0_SEL 0x3 +#define DEFAULT_IO_MACRO_IO2_IO3_MASK GENMASK(15, 4) +#define IO_MACRO_IO2_IO3_SWAP 0x4640 + +/* We always configure 4 bytes per FIFO word */ +#define BYTES_PER_FIFO_WORD 4 + +struct qcom_geni_private_data { + /* NOTE: earlycon port will have NULL here */ + struct uart_driver *drv; + + u32 poll_cached_bytes; + unsigned int poll_cached_bytes_cnt; + + u32 write_cached_bytes; + unsigned int write_cached_bytes_cnt; +}; + +struct qcom_geni_serial_port { + struct uart_port uport; + struct geni_se se; + const char *name; + u32 tx_fifo_depth; + u32 tx_fifo_width; + u32 rx_fifo_depth; + bool setup; + unsigned long clk_rate; + int (*handle_rx)(struct uart_port *uport, u32 bytes, bool drop); + unsigned int baud; + void *rx_fifo; + u32 loopback; + bool brk; + + unsigned int tx_remaining; + int wakeup_irq; + bool rx_tx_swap; + bool cts_rts_swap; + + struct qcom_geni_private_data private_data; +}; + +static const struct uart_ops qcom_geni_console_pops; +static const struct uart_ops qcom_geni_uart_pops; +static struct uart_driver qcom_geni_console_driver; +static struct uart_driver qcom_geni_uart_driver; +static int handle_rx_console(struct uart_port *uport, u32 bytes, bool drop); +static int handle_rx_uart(struct uart_port *uport, u32 bytes, bool drop); +static unsigned int qcom_geni_serial_tx_empty(struct uart_port *port); +static void qcom_geni_serial_stop_rx(struct uart_port *uport); +static void qcom_geni_serial_handle_rx(struct uart_port *uport, bool drop); + +#define to_dev_port(ptr, member) \ + container_of(ptr, struct qcom_geni_serial_port, member) + +static struct qcom_geni_serial_port qcom_geni_uart_ports[GENI_UART_PORTS] = { + [0] = { + .uport = { + .iotype = UPIO_MEM, + .ops = &qcom_geni_uart_pops, + .flags = UPF_BOOT_AUTOCONF, + .line = 0, + }, + }, + [1] = { + .uport = { + .iotype = UPIO_MEM, + .ops = &qcom_geni_uart_pops, + .flags = UPF_BOOT_AUTOCONF, + .line = 1, + }, + }, + [2] = { + .uport = { + .iotype = UPIO_MEM, + .ops = &qcom_geni_uart_pops, + .flags = UPF_BOOT_AUTOCONF, + .line = 2, + }, + }, +}; + +static struct qcom_geni_serial_port qcom_geni_console_port = { + .uport = { + .iotype = UPIO_MEM, + .ops = &qcom_geni_console_pops, + .flags = UPF_BOOT_AUTOCONF, + .line = 0, + }, +}; + +static int qcom_geni_serial_request_port(struct uart_port *uport) +{ + struct platform_device *pdev = to_platform_device(uport->dev); + struct qcom_geni_serial_port *port = to_dev_port(uport, uport); + + uport->membase = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(uport->membase)) + return PTR_ERR(uport->membase); + port->se.base = uport->membase; + return 0; +} + +static void qcom_geni_serial_config_port(struct uart_port *uport, int cfg_flags) +{ + if (cfg_flags & UART_CONFIG_TYPE) { + uport->type = PORT_MSM; + qcom_geni_serial_request_port(uport); + } +} + +static unsigned int qcom_geni_serial_get_mctrl(struct uart_port *uport) +{ + unsigned int mctrl = TIOCM_DSR | TIOCM_CAR; + u32 geni_ios; + + if (uart_console(uport)) { + mctrl |= TIOCM_CTS; + } else { + geni_ios = readl(uport->membase + SE_GENI_IOS); + if (!(geni_ios & IO2_DATA_IN)) + mctrl |= TIOCM_CTS; + } + + return mctrl; +} + +static void qcom_geni_serial_set_mctrl(struct uart_port *uport, + unsigned int mctrl) +{ + u32 uart_manual_rfr = 0; + struct qcom_geni_serial_port *port = to_dev_port(uport, uport); + + if (uart_console(uport)) + return; + + if (mctrl & TIOCM_LOOP) + port->loopback = RX_TX_CTS_RTS_SORTED; + + if (!(mctrl & TIOCM_RTS) && !uport->suspended) + uart_manual_rfr = UART_MANUAL_RFR_EN | UART_RFR_NOT_READY; + writel(uart_manual_rfr, uport->membase + SE_UART_MANUAL_RFR); +} + +static const char *qcom_geni_serial_get_type(struct uart_port *uport) +{ + return "MSM"; +} + +static struct qcom_geni_serial_port *get_port_from_line(int line, bool console) +{ + struct qcom_geni_serial_port *port; + int nr_ports = console ? GENI_UART_CONS_PORTS : GENI_UART_PORTS; + + if (line < 0 || line >= nr_ports) + return ERR_PTR(-ENXIO); + + port = console ? &qcom_geni_console_port : &qcom_geni_uart_ports[line]; + return port; +} + +static bool qcom_geni_serial_poll_bit(struct uart_port *uport, + int offset, int field, bool set) +{ + u32 reg; + struct qcom_geni_serial_port *port; + unsigned int baud; + unsigned int fifo_bits; + unsigned long timeout_us = 20000; + struct qcom_geni_private_data *private_data = uport->private_data; + + if (private_data->drv) { + port = to_dev_port(uport, uport); + baud = port->baud; + if (!baud) + baud = 115200; + fifo_bits = port->tx_fifo_depth * port->tx_fifo_width; + /* + * Total polling iterations based on FIFO worth of bytes to be + * sent at current baud. Add a little fluff to the wait. + */ + timeout_us = ((fifo_bits * USEC_PER_SEC) / baud) + 500; + } + + /* + * Use custom implementation instead of readl_poll_atomic since ktimer + * is not ready at the time of early console. + */ + timeout_us = DIV_ROUND_UP(timeout_us, 10) * 10; + while (timeout_us) { + reg = readl(uport->membase + offset); + if ((bool)(reg & field) == set) + return true; + udelay(10); + timeout_us -= 10; + } + return false; +} + +static void qcom_geni_serial_setup_tx(struct uart_port *uport, u32 xmit_size) +{ + u32 m_cmd; + + writel(xmit_size, uport->membase + SE_UART_TX_TRANS_LEN); + m_cmd = UART_START_TX << M_OPCODE_SHFT; + writel(m_cmd, uport->membase + SE_GENI_M_CMD0); +} + +static void qcom_geni_serial_poll_tx_done(struct uart_port *uport) +{ + int done; + u32 irq_clear = M_CMD_DONE_EN; + + done = qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS, + M_CMD_DONE_EN, true); + if (!done) { + writel(M_GENI_CMD_ABORT, uport->membase + + SE_GENI_M_CMD_CTRL_REG); + irq_clear |= M_CMD_ABORT_EN; + qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS, + M_CMD_ABORT_EN, true); + } + writel(irq_clear, uport->membase + SE_GENI_M_IRQ_CLEAR); +} + +static void qcom_geni_serial_abort_rx(struct uart_port *uport) +{ + u32 irq_clear = S_CMD_DONE_EN | S_CMD_ABORT_EN; + + writel(S_GENI_CMD_ABORT, uport->membase + SE_GENI_S_CMD_CTRL_REG); + qcom_geni_serial_poll_bit(uport, SE_GENI_S_CMD_CTRL_REG, + S_GENI_CMD_ABORT, false); + writel(irq_clear, uport->membase + SE_GENI_S_IRQ_CLEAR); + writel(FORCE_DEFAULT, uport->membase + GENI_FORCE_DEFAULT_REG); +} + +#ifdef CONFIG_CONSOLE_POLL + +static int qcom_geni_serial_get_char(struct uart_port *uport) +{ + struct qcom_geni_private_data *private_data = uport->private_data; + u32 status; + u32 word_cnt; + int ret; + + if (!private_data->poll_cached_bytes_cnt) { + status = readl(uport->membase + SE_GENI_M_IRQ_STATUS); + writel(status, uport->membase + SE_GENI_M_IRQ_CLEAR); + + status = readl(uport->membase + SE_GENI_S_IRQ_STATUS); + writel(status, uport->membase + SE_GENI_S_IRQ_CLEAR); + + status = readl(uport->membase + SE_GENI_RX_FIFO_STATUS); + word_cnt = status & RX_FIFO_WC_MSK; + if (!word_cnt) + return NO_POLL_CHAR; + + if (word_cnt == 1 && (status & RX_LAST)) + /* + * NOTE: If RX_LAST_BYTE_VALID is 0 it needs to be + * treated as if it was BYTES_PER_FIFO_WORD. + */ + private_data->poll_cached_bytes_cnt = + (status & RX_LAST_BYTE_VALID_MSK) >> + RX_LAST_BYTE_VALID_SHFT; + + if (private_data->poll_cached_bytes_cnt == 0) + private_data->poll_cached_bytes_cnt = BYTES_PER_FIFO_WORD; + + private_data->poll_cached_bytes = + readl(uport->membase + SE_GENI_RX_FIFOn); + } + + private_data->poll_cached_bytes_cnt--; + ret = private_data->poll_cached_bytes & 0xff; + private_data->poll_cached_bytes >>= 8; + + return ret; +} + +static void qcom_geni_serial_poll_put_char(struct uart_port *uport, + unsigned char c) +{ + writel(DEF_TX_WM, uport->membase + SE_GENI_TX_WATERMARK_REG); + qcom_geni_serial_setup_tx(uport, 1); + WARN_ON(!qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS, + M_TX_FIFO_WATERMARK_EN, true)); + writel(c, uport->membase + SE_GENI_TX_FIFOn); + writel(M_TX_FIFO_WATERMARK_EN, uport->membase + SE_GENI_M_IRQ_CLEAR); + qcom_geni_serial_poll_tx_done(uport); +} +#endif + +#ifdef CONFIG_SERIAL_QCOM_GENI_CONSOLE +static void qcom_geni_serial_wr_char(struct uart_port *uport, unsigned char ch) +{ + struct qcom_geni_private_data *private_data = uport->private_data; + + private_data->write_cached_bytes = + (private_data->write_cached_bytes >> 8) | (ch << 24); + private_data->write_cached_bytes_cnt++; + + if (private_data->write_cached_bytes_cnt == BYTES_PER_FIFO_WORD) { + writel(private_data->write_cached_bytes, + uport->membase + SE_GENI_TX_FIFOn); + private_data->write_cached_bytes_cnt = 0; + } +} + +static void +__qcom_geni_serial_console_write(struct uart_port *uport, const char *s, + unsigned int count) +{ + struct qcom_geni_private_data *private_data = uport->private_data; + + int i; + u32 bytes_to_send = count; + + for (i = 0; i < count; i++) { + /* + * uart_console_write() adds a carriage return for each newline. + * Account for additional bytes to be written. + */ + if (s[i] == '\n') + bytes_to_send++; + } + + writel(DEF_TX_WM, uport->membase + SE_GENI_TX_WATERMARK_REG); + qcom_geni_serial_setup_tx(uport, bytes_to_send); + for (i = 0; i < count; ) { + size_t chars_to_write = 0; + size_t avail = DEF_FIFO_DEPTH_WORDS - DEF_TX_WM; + + /* + * If the WM bit never set, then the Tx state machine is not + * in a valid state, so break, cancel/abort any existing + * command. Unfortunately the current data being written is + * lost. + */ + if (!qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS, + M_TX_FIFO_WATERMARK_EN, true)) + break; + chars_to_write = min_t(size_t, count - i, avail / 2); + uart_console_write(uport, s + i, chars_to_write, + qcom_geni_serial_wr_char); + writel(M_TX_FIFO_WATERMARK_EN, uport->membase + + SE_GENI_M_IRQ_CLEAR); + i += chars_to_write; + } + + if (private_data->write_cached_bytes_cnt) { + private_data->write_cached_bytes >>= BITS_PER_BYTE * + (BYTES_PER_FIFO_WORD - private_data->write_cached_bytes_cnt); + writel(private_data->write_cached_bytes, + uport->membase + SE_GENI_TX_FIFOn); + private_data->write_cached_bytes_cnt = 0; + } + + qcom_geni_serial_poll_tx_done(uport); +} + +static void qcom_geni_serial_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct uart_port *uport; + struct qcom_geni_serial_port *port; + bool locked = true; + unsigned long flags; + u32 geni_status; + u32 irq_en; + + WARN_ON(co->index < 0 || co->index >= GENI_UART_CONS_PORTS); + + port = get_port_from_line(co->index, true); + if (IS_ERR(port)) + return; + + uport = &port->uport; + if (oops_in_progress) + locked = spin_trylock_irqsave(&uport->lock, flags); + else + spin_lock_irqsave(&uport->lock, flags); + + geni_status = readl(uport->membase + SE_GENI_STATUS); + + /* Cancel the current write to log the fault */ + if (!locked) { + geni_se_cancel_m_cmd(&port->se); + if (!qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS, + M_CMD_CANCEL_EN, true)) { + geni_se_abort_m_cmd(&port->se); + qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS, + M_CMD_ABORT_EN, true); + writel(M_CMD_ABORT_EN, uport->membase + + SE_GENI_M_IRQ_CLEAR); + } + writel(M_CMD_CANCEL_EN, uport->membase + SE_GENI_M_IRQ_CLEAR); + } else if ((geni_status & M_GENI_CMD_ACTIVE) && !port->tx_remaining) { + /* + * It seems we can't interrupt existing transfers if all data + * has been sent, in which case we need to look for done first. + */ + qcom_geni_serial_poll_tx_done(uport); + + if (!uart_circ_empty(&uport->state->xmit)) { + irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN); + writel(irq_en | M_TX_FIFO_WATERMARK_EN, + uport->membase + SE_GENI_M_IRQ_EN); + } + } + + __qcom_geni_serial_console_write(uport, s, count); + + if (port->tx_remaining) + qcom_geni_serial_setup_tx(uport, port->tx_remaining); + + if (locked) + spin_unlock_irqrestore(&uport->lock, flags); +} + +static int handle_rx_console(struct uart_port *uport, u32 bytes, bool drop) +{ + u32 i; + unsigned char buf[sizeof(u32)]; + struct tty_port *tport; + struct qcom_geni_serial_port *port = to_dev_port(uport, uport); + + tport = &uport->state->port; + for (i = 0; i < bytes; ) { + int c; + int chunk = min_t(int, bytes - i, BYTES_PER_FIFO_WORD); + + ioread32_rep(uport->membase + SE_GENI_RX_FIFOn, buf, 1); + i += chunk; + if (drop) + continue; + + for (c = 0; c < chunk; c++) { + int sysrq; + + uport->icount.rx++; + if (port->brk && buf[c] == 0) { + port->brk = false; + if (uart_handle_break(uport)) + continue; + } + + sysrq = uart_prepare_sysrq_char(uport, buf[c]); + + if (!sysrq) + tty_insert_flip_char(tport, buf[c], TTY_NORMAL); + } + } + if (!drop) + tty_flip_buffer_push(tport); + return 0; +} +#else +static int handle_rx_console(struct uart_port *uport, u32 bytes, bool drop) +{ + return -EPERM; +} + +#endif /* CONFIG_SERIAL_QCOM_GENI_CONSOLE */ + +static int handle_rx_uart(struct uart_port *uport, u32 bytes, bool drop) +{ + struct tty_port *tport; + struct qcom_geni_serial_port *port = to_dev_port(uport, uport); + u32 num_bytes_pw = port->tx_fifo_width / BITS_PER_BYTE; + u32 words = ALIGN(bytes, num_bytes_pw) / num_bytes_pw; + int ret; + + tport = &uport->state->port; + ioread32_rep(uport->membase + SE_GENI_RX_FIFOn, port->rx_fifo, words); + if (drop) + return 0; + + ret = tty_insert_flip_string(tport, port->rx_fifo, bytes); + if (ret != bytes) { + dev_err(uport->dev, "%s:Unable to push data ret %d_bytes %d\n", + __func__, ret, bytes); + WARN_ON_ONCE(1); + } + uport->icount.rx += ret; + tty_flip_buffer_push(tport); + return ret; +} + +static void qcom_geni_serial_start_tx(struct uart_port *uport) +{ + u32 irq_en; + u32 status; + + status = readl(uport->membase + SE_GENI_STATUS); + if (status & M_GENI_CMD_ACTIVE) + return; + + if (!qcom_geni_serial_tx_empty(uport)) + return; + + irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN); + irq_en |= M_TX_FIFO_WATERMARK_EN | M_CMD_DONE_EN; + + writel(DEF_TX_WM, uport->membase + SE_GENI_TX_WATERMARK_REG); + writel(irq_en, uport->membase + SE_GENI_M_IRQ_EN); +} + +static void qcom_geni_serial_stop_tx(struct uart_port *uport) +{ + u32 irq_en; + u32 status; + struct qcom_geni_serial_port *port = to_dev_port(uport, uport); + + irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN); + irq_en &= ~(M_CMD_DONE_EN | M_TX_FIFO_WATERMARK_EN); + writel(0, uport->membase + SE_GENI_TX_WATERMARK_REG); + writel(irq_en, uport->membase + SE_GENI_M_IRQ_EN); + status = readl(uport->membase + SE_GENI_STATUS); + /* Possible stop tx is called multiple times. */ + if (!(status & M_GENI_CMD_ACTIVE)) + return; + + geni_se_cancel_m_cmd(&port->se); + if (!qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS, + M_CMD_CANCEL_EN, true)) { + geni_se_abort_m_cmd(&port->se); + qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS, + M_CMD_ABORT_EN, true); + writel(M_CMD_ABORT_EN, uport->membase + SE_GENI_M_IRQ_CLEAR); + } + writel(M_CMD_CANCEL_EN, uport->membase + SE_GENI_M_IRQ_CLEAR); +} + +static void qcom_geni_serial_start_rx(struct uart_port *uport) +{ + u32 irq_en; + u32 status; + struct qcom_geni_serial_port *port = to_dev_port(uport, uport); + + status = readl(uport->membase + SE_GENI_STATUS); + if (status & S_GENI_CMD_ACTIVE) + qcom_geni_serial_stop_rx(uport); + + geni_se_setup_s_cmd(&port->se, UART_START_READ, 0); + + irq_en = readl(uport->membase + SE_GENI_S_IRQ_EN); + irq_en |= S_RX_FIFO_WATERMARK_EN | S_RX_FIFO_LAST_EN; + writel(irq_en, uport->membase + SE_GENI_S_IRQ_EN); + + irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN); + irq_en |= M_RX_FIFO_WATERMARK_EN | M_RX_FIFO_LAST_EN; + writel(irq_en, uport->membase + SE_GENI_M_IRQ_EN); +} + +static void qcom_geni_serial_stop_rx(struct uart_port *uport) +{ + u32 irq_en; + u32 status; + struct qcom_geni_serial_port *port = to_dev_port(uport, uport); + u32 s_irq_status; + + irq_en = readl(uport->membase + SE_GENI_S_IRQ_EN); + irq_en &= ~(S_RX_FIFO_WATERMARK_EN | S_RX_FIFO_LAST_EN); + writel(irq_en, uport->membase + SE_GENI_S_IRQ_EN); + + irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN); + irq_en &= ~(M_RX_FIFO_WATERMARK_EN | M_RX_FIFO_LAST_EN); + writel(irq_en, uport->membase + SE_GENI_M_IRQ_EN); + + status = readl(uport->membase + SE_GENI_STATUS); + /* Possible stop rx is called multiple times. */ + if (!(status & S_GENI_CMD_ACTIVE)) + return; + + geni_se_cancel_s_cmd(&port->se); + qcom_geni_serial_poll_bit(uport, SE_GENI_S_IRQ_STATUS, + S_CMD_CANCEL_EN, true); + /* + * If timeout occurs secondary engine remains active + * and Abort sequence is executed. + */ + s_irq_status = readl(uport->membase + SE_GENI_S_IRQ_STATUS); + /* Flush the Rx buffer */ + if (s_irq_status & S_RX_FIFO_LAST_EN) + qcom_geni_serial_handle_rx(uport, true); + writel(s_irq_status, uport->membase + SE_GENI_S_IRQ_CLEAR); + + status = readl(uport->membase + SE_GENI_STATUS); + if (status & S_GENI_CMD_ACTIVE) + qcom_geni_serial_abort_rx(uport); +} + +static void qcom_geni_serial_handle_rx(struct uart_port *uport, bool drop) +{ + u32 status; + u32 word_cnt; + u32 last_word_byte_cnt; + u32 last_word_partial; + u32 total_bytes; + struct qcom_geni_serial_port *port = to_dev_port(uport, uport); + + status = readl(uport->membase + SE_GENI_RX_FIFO_STATUS); + word_cnt = status & RX_FIFO_WC_MSK; + last_word_partial = status & RX_LAST; + last_word_byte_cnt = (status & RX_LAST_BYTE_VALID_MSK) >> + RX_LAST_BYTE_VALID_SHFT; + + if (!word_cnt) + return; + total_bytes = BYTES_PER_FIFO_WORD * (word_cnt - 1); + if (last_word_partial && last_word_byte_cnt) + total_bytes += last_word_byte_cnt; + else + total_bytes += BYTES_PER_FIFO_WORD; + port->handle_rx(uport, total_bytes, drop); +} + +static void qcom_geni_serial_handle_tx(struct uart_port *uport, bool done, + bool active) +{ + struct qcom_geni_serial_port *port = to_dev_port(uport, uport); + struct circ_buf *xmit = &uport->state->xmit; + size_t avail; + size_t remaining; + size_t pending; + int i; + u32 status; + u32 irq_en; + unsigned int chunk; + int tail; + + status = readl(uport->membase + SE_GENI_TX_FIFO_STATUS); + + /* Complete the current tx command before taking newly added data */ + if (active) + pending = port->tx_remaining; + else + pending = uart_circ_chars_pending(xmit); + + /* All data has been transmitted and acknowledged as received */ + if (!pending && !status && done) { + qcom_geni_serial_stop_tx(uport); + goto out_write_wakeup; + } + + avail = port->tx_fifo_depth - (status & TX_FIFO_WC); + avail *= BYTES_PER_FIFO_WORD; + + tail = xmit->tail; + chunk = min(avail, pending); + if (!chunk) + goto out_write_wakeup; + + if (!port->tx_remaining) { + qcom_geni_serial_setup_tx(uport, pending); + port->tx_remaining = pending; + + irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN); + if (!(irq_en & M_TX_FIFO_WATERMARK_EN)) + writel(irq_en | M_TX_FIFO_WATERMARK_EN, + uport->membase + SE_GENI_M_IRQ_EN); + } + + remaining = chunk; + for (i = 0; i < chunk; ) { + unsigned int tx_bytes; + u8 buf[sizeof(u32)]; + int c; + + memset(buf, 0, sizeof(buf)); + tx_bytes = min_t(size_t, remaining, BYTES_PER_FIFO_WORD); + + for (c = 0; c < tx_bytes ; c++) { + buf[c] = xmit->buf[tail++]; + tail &= UART_XMIT_SIZE - 1; + } + + iowrite32_rep(uport->membase + SE_GENI_TX_FIFOn, buf, 1); + + i += tx_bytes; + uport->icount.tx += tx_bytes; + remaining -= tx_bytes; + port->tx_remaining -= tx_bytes; + } + + xmit->tail = tail; + + /* + * The tx fifo watermark is level triggered and latched. Though we had + * cleared it in qcom_geni_serial_isr it will have already reasserted + * so we must clear it again here after our writes. + */ + writel(M_TX_FIFO_WATERMARK_EN, + uport->membase + SE_GENI_M_IRQ_CLEAR); + +out_write_wakeup: + if (!port->tx_remaining) { + irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN); + if (irq_en & M_TX_FIFO_WATERMARK_EN) + writel(irq_en & ~M_TX_FIFO_WATERMARK_EN, + uport->membase + SE_GENI_M_IRQ_EN); + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(uport); +} + +static irqreturn_t qcom_geni_serial_isr(int isr, void *dev) +{ + u32 m_irq_en; + u32 m_irq_status; + u32 s_irq_status; + u32 geni_status; + struct uart_port *uport = dev; + bool drop_rx = false; + struct tty_port *tport = &uport->state->port; + struct qcom_geni_serial_port *port = to_dev_port(uport, uport); + + if (uport->suspended) + return IRQ_NONE; + + spin_lock(&uport->lock); + + m_irq_status = readl(uport->membase + SE_GENI_M_IRQ_STATUS); + s_irq_status = readl(uport->membase + SE_GENI_S_IRQ_STATUS); + geni_status = readl(uport->membase + SE_GENI_STATUS); + m_irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN); + writel(m_irq_status, uport->membase + SE_GENI_M_IRQ_CLEAR); + writel(s_irq_status, uport->membase + SE_GENI_S_IRQ_CLEAR); + + if (WARN_ON(m_irq_status & M_ILLEGAL_CMD_EN)) + goto out_unlock; + + if (s_irq_status & S_RX_FIFO_WR_ERR_EN) { + uport->icount.overrun++; + tty_insert_flip_char(tport, 0, TTY_OVERRUN); + } + + if (m_irq_status & m_irq_en & (M_TX_FIFO_WATERMARK_EN | M_CMD_DONE_EN)) + qcom_geni_serial_handle_tx(uport, m_irq_status & M_CMD_DONE_EN, + geni_status & M_GENI_CMD_ACTIVE); + + if (s_irq_status & S_GP_IRQ_0_EN || s_irq_status & S_GP_IRQ_1_EN) { + if (s_irq_status & S_GP_IRQ_0_EN) + uport->icount.parity++; + drop_rx = true; + } else if (s_irq_status & S_GP_IRQ_2_EN || + s_irq_status & S_GP_IRQ_3_EN) { + uport->icount.brk++; + port->brk = true; + } + + if (s_irq_status & S_RX_FIFO_WATERMARK_EN || + s_irq_status & S_RX_FIFO_LAST_EN) + qcom_geni_serial_handle_rx(uport, drop_rx); + +out_unlock: + uart_unlock_and_check_sysrq(uport); + + return IRQ_HANDLED; +} + +static int setup_fifos(struct qcom_geni_serial_port *port) +{ + struct uart_port *uport; + u32 old_rx_fifo_depth = port->rx_fifo_depth; + + uport = &port->uport; + port->tx_fifo_depth = geni_se_get_tx_fifo_depth(&port->se); + port->tx_fifo_width = geni_se_get_tx_fifo_width(&port->se); + port->rx_fifo_depth = geni_se_get_rx_fifo_depth(&port->se); + uport->fifosize = + (port->tx_fifo_depth * port->tx_fifo_width) / BITS_PER_BYTE; + + if (port->rx_fifo && (old_rx_fifo_depth != port->rx_fifo_depth) && port->rx_fifo_depth) { + port->rx_fifo = devm_krealloc(uport->dev, port->rx_fifo, + port->rx_fifo_depth * sizeof(u32), + GFP_KERNEL); + if (!port->rx_fifo) + return -ENOMEM; + } + + return 0; +} + + +static void qcom_geni_serial_shutdown(struct uart_port *uport) +{ + disable_irq(uport->irq); +} + +static int qcom_geni_serial_port_setup(struct uart_port *uport) +{ + struct qcom_geni_serial_port *port = to_dev_port(uport, uport); + u32 rxstale = DEFAULT_BITS_PER_CHAR * STALE_TIMEOUT; + u32 proto; + u32 pin_swap; + int ret; + + proto = geni_se_read_proto(&port->se); + if (proto != GENI_SE_UART) { + dev_err(uport->dev, "Invalid FW loaded, proto: %d\n", proto); + return -ENXIO; + } + + qcom_geni_serial_stop_rx(uport); + + ret = setup_fifos(port); + if (ret) + return ret; + + writel(rxstale, uport->membase + SE_UART_RX_STALE_CNT); + + pin_swap = readl(uport->membase + SE_UART_IO_MACRO_CTRL); + if (port->rx_tx_swap) { + pin_swap &= ~DEFAULT_IO_MACRO_IO2_IO3_MASK; + pin_swap |= IO_MACRO_IO2_IO3_SWAP; + } + if (port->cts_rts_swap) { + pin_swap &= ~DEFAULT_IO_MACRO_IO0_IO1_MASK; + pin_swap |= IO_MACRO_IO0_SEL; + } + /* Configure this register if RX-TX, CTS-RTS pins are swapped */ + if (port->rx_tx_swap || port->cts_rts_swap) + writel(pin_swap, uport->membase + SE_UART_IO_MACRO_CTRL); + + /* + * Make an unconditional cancel on the main sequencer to reset + * it else we could end up in data loss scenarios. + */ + if (uart_console(uport)) + qcom_geni_serial_poll_tx_done(uport); + geni_se_config_packing(&port->se, BITS_PER_BYTE, BYTES_PER_FIFO_WORD, + false, true, true); + geni_se_init(&port->se, UART_RX_WM, port->rx_fifo_depth - 2); + geni_se_select_mode(&port->se, GENI_SE_FIFO); + port->setup = true; + + return 0; +} + +static int qcom_geni_serial_startup(struct uart_port *uport) +{ + int ret; + struct qcom_geni_serial_port *port = to_dev_port(uport, uport); + + if (!port->setup) { + ret = qcom_geni_serial_port_setup(uport); + if (ret) + return ret; + } + enable_irq(uport->irq); + + return 0; +} + +static unsigned long find_clk_rate_in_tol(struct clk *clk, unsigned int desired_clk, + unsigned int *clk_div, unsigned int percent_tol) +{ + unsigned long freq; + unsigned long div, maxdiv; + u64 mult; + unsigned long offset, abs_tol, achieved; + + abs_tol = div_u64((u64)desired_clk * percent_tol, 100); + maxdiv = CLK_DIV_MSK >> CLK_DIV_SHFT; + div = 1; + while (div <= maxdiv) { + mult = (u64)div * desired_clk; + if (mult != (unsigned long)mult) + break; + + offset = div * abs_tol; + freq = clk_round_rate(clk, mult - offset); + + /* Can only get lower if we're done */ + if (freq < mult - offset) + break; + + /* + * Re-calculate div in case rounding skipped rates but we + * ended up at a good one, then check for a match. + */ + div = DIV_ROUND_CLOSEST(freq, desired_clk); + achieved = DIV_ROUND_CLOSEST(freq, div); + if (achieved <= desired_clk + abs_tol && + achieved >= desired_clk - abs_tol) { + *clk_div = div; + return freq; + } + + div = DIV_ROUND_UP(freq, desired_clk); + } + + return 0; +} + +static unsigned long get_clk_div_rate(struct clk *clk, unsigned int baud, + unsigned int sampling_rate, unsigned int *clk_div) +{ + unsigned long ser_clk; + unsigned long desired_clk; + + desired_clk = baud * sampling_rate; + if (!desired_clk) + return 0; + + /* + * try to find a clock rate within 2% tolerance, then within 5% + */ + ser_clk = find_clk_rate_in_tol(clk, desired_clk, clk_div, 2); + if (!ser_clk) + ser_clk = find_clk_rate_in_tol(clk, desired_clk, clk_div, 5); + + return ser_clk; +} + +static void qcom_geni_serial_set_termios(struct uart_port *uport, + struct ktermios *termios, + const struct ktermios *old) +{ + unsigned int baud; + u32 bits_per_char; + u32 tx_trans_cfg; + u32 tx_parity_cfg; + u32 rx_trans_cfg; + u32 rx_parity_cfg; + u32 stop_bit_len; + unsigned int clk_div; + u32 ser_clk_cfg; + struct qcom_geni_serial_port *port = to_dev_port(uport, uport); + unsigned long clk_rate; + u32 ver, sampling_rate; + unsigned int avg_bw_core; + + qcom_geni_serial_stop_rx(uport); + /* baud rate */ + baud = uart_get_baud_rate(uport, termios, old, 300, 4000000); + port->baud = baud; + + sampling_rate = UART_OVERSAMPLING; + /* Sampling rate is halved for IP versions >= 2.5 */ + ver = geni_se_get_qup_hw_version(&port->se); + if (ver >= QUP_SE_VERSION_2_5) + sampling_rate /= 2; + + clk_rate = get_clk_div_rate(port->se.clk, baud, + sampling_rate, &clk_div); + if (!clk_rate) { + dev_err(port->se.dev, + "Couldn't find suitable clock rate for %u\n", + baud * sampling_rate); + goto out_restart_rx; + } + + dev_dbg(port->se.dev, "desired_rate-%u, clk_rate-%lu, clk_div-%u\n", + baud * sampling_rate, clk_rate, clk_div); + + uport->uartclk = clk_rate; + port->clk_rate = clk_rate; + dev_pm_opp_set_rate(uport->dev, clk_rate); + ser_clk_cfg = SER_CLK_EN; + ser_clk_cfg |= clk_div << CLK_DIV_SHFT; + + /* + * Bump up BW vote on CPU and CORE path as driver supports FIFO mode + * only. + */ + avg_bw_core = (baud > 115200) ? Bps_to_icc(CORE_2X_50_MHZ) + : GENI_DEFAULT_BW; + port->se.icc_paths[GENI_TO_CORE].avg_bw = avg_bw_core; + port->se.icc_paths[CPU_TO_GENI].avg_bw = Bps_to_icc(baud); + geni_icc_set_bw(&port->se); + + /* parity */ + tx_trans_cfg = readl(uport->membase + SE_UART_TX_TRANS_CFG); + tx_parity_cfg = readl(uport->membase + SE_UART_TX_PARITY_CFG); + rx_trans_cfg = readl(uport->membase + SE_UART_RX_TRANS_CFG); + rx_parity_cfg = readl(uport->membase + SE_UART_RX_PARITY_CFG); + if (termios->c_cflag & PARENB) { + tx_trans_cfg |= UART_TX_PAR_EN; + rx_trans_cfg |= UART_RX_PAR_EN; + tx_parity_cfg |= PAR_CALC_EN; + rx_parity_cfg |= PAR_CALC_EN; + if (termios->c_cflag & PARODD) { + tx_parity_cfg |= PAR_ODD; + rx_parity_cfg |= PAR_ODD; + } else if (termios->c_cflag & CMSPAR) { + tx_parity_cfg |= PAR_SPACE; + rx_parity_cfg |= PAR_SPACE; + } else { + tx_parity_cfg |= PAR_EVEN; + rx_parity_cfg |= PAR_EVEN; + } + } else { + tx_trans_cfg &= ~UART_TX_PAR_EN; + rx_trans_cfg &= ~UART_RX_PAR_EN; + tx_parity_cfg &= ~PAR_CALC_EN; + rx_parity_cfg &= ~PAR_CALC_EN; + } + + /* bits per char */ + bits_per_char = tty_get_char_size(termios->c_cflag); + + /* stop bits */ + if (termios->c_cflag & CSTOPB) + stop_bit_len = TX_STOP_BIT_LEN_2; + else + stop_bit_len = TX_STOP_BIT_LEN_1; + + /* flow control, clear the CTS_MASK bit if using flow control. */ + if (termios->c_cflag & CRTSCTS) + tx_trans_cfg &= ~UART_CTS_MASK; + else + tx_trans_cfg |= UART_CTS_MASK; + + if (baud) + uart_update_timeout(uport, termios->c_cflag, baud); + + if (!uart_console(uport)) + writel(port->loopback, + uport->membase + SE_UART_LOOPBACK_CFG); + writel(tx_trans_cfg, uport->membase + SE_UART_TX_TRANS_CFG); + writel(tx_parity_cfg, uport->membase + SE_UART_TX_PARITY_CFG); + writel(rx_trans_cfg, uport->membase + SE_UART_RX_TRANS_CFG); + writel(rx_parity_cfg, uport->membase + SE_UART_RX_PARITY_CFG); + writel(bits_per_char, uport->membase + SE_UART_TX_WORD_LEN); + writel(bits_per_char, uport->membase + SE_UART_RX_WORD_LEN); + writel(stop_bit_len, uport->membase + SE_UART_TX_STOP_BIT_LEN); + writel(ser_clk_cfg, uport->membase + GENI_SER_M_CLK_CFG); + writel(ser_clk_cfg, uport->membase + GENI_SER_S_CLK_CFG); +out_restart_rx: + qcom_geni_serial_start_rx(uport); +} + +static unsigned int qcom_geni_serial_tx_empty(struct uart_port *uport) +{ + return !readl(uport->membase + SE_GENI_TX_FIFO_STATUS); +} + +#ifdef CONFIG_SERIAL_QCOM_GENI_CONSOLE +static int qcom_geni_console_setup(struct console *co, char *options) +{ + struct uart_port *uport; + struct qcom_geni_serial_port *port; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + int ret; + + if (co->index >= GENI_UART_CONS_PORTS || co->index < 0) + return -ENXIO; + + port = get_port_from_line(co->index, true); + if (IS_ERR(port)) { + pr_err("Invalid line %d\n", co->index); + return PTR_ERR(port); + } + + uport = &port->uport; + + if (unlikely(!uport->membase)) + return -ENXIO; + + if (!port->setup) { + ret = qcom_geni_serial_port_setup(uport); + if (ret) + return ret; + } + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(uport, co, baud, parity, bits, flow); +} + +static void qcom_geni_serial_earlycon_write(struct console *con, + const char *s, unsigned int n) +{ + struct earlycon_device *dev = con->data; + + __qcom_geni_serial_console_write(&dev->port, s, n); +} + +#ifdef CONFIG_CONSOLE_POLL +static int qcom_geni_serial_earlycon_read(struct console *con, + char *s, unsigned int n) +{ + struct earlycon_device *dev = con->data; + struct uart_port *uport = &dev->port; + int num_read = 0; + int ch; + + while (num_read < n) { + ch = qcom_geni_serial_get_char(uport); + if (ch == NO_POLL_CHAR) + break; + s[num_read++] = ch; + } + + return num_read; +} + +static void __init qcom_geni_serial_enable_early_read(struct geni_se *se, + struct console *con) +{ + geni_se_setup_s_cmd(se, UART_START_READ, 0); + con->read = qcom_geni_serial_earlycon_read; +} +#else +static inline void qcom_geni_serial_enable_early_read(struct geni_se *se, + struct console *con) { } +#endif + +static struct qcom_geni_private_data earlycon_private_data; + +static int __init qcom_geni_serial_earlycon_setup(struct earlycon_device *dev, + const char *opt) +{ + struct uart_port *uport = &dev->port; + u32 tx_trans_cfg; + u32 tx_parity_cfg = 0; /* Disable Tx Parity */ + u32 rx_trans_cfg = 0; + u32 rx_parity_cfg = 0; /* Disable Rx Parity */ + u32 stop_bit_len = 0; /* Default stop bit length - 1 bit */ + u32 bits_per_char; + struct geni_se se; + + if (!uport->membase) + return -EINVAL; + + uport->private_data = &earlycon_private_data; + + memset(&se, 0, sizeof(se)); + se.base = uport->membase; + if (geni_se_read_proto(&se) != GENI_SE_UART) + return -ENXIO; + /* + * Ignore Flow control. + * n = 8. + */ + tx_trans_cfg = UART_CTS_MASK; + bits_per_char = BITS_PER_BYTE; + + /* + * Make an unconditional cancel on the main sequencer to reset + * it else we could end up in data loss scenarios. + */ + qcom_geni_serial_poll_tx_done(uport); + qcom_geni_serial_abort_rx(uport); + geni_se_config_packing(&se, BITS_PER_BYTE, BYTES_PER_FIFO_WORD, + false, true, true); + geni_se_init(&se, DEF_FIFO_DEPTH_WORDS / 2, DEF_FIFO_DEPTH_WORDS - 2); + geni_se_select_mode(&se, GENI_SE_FIFO); + + writel(tx_trans_cfg, uport->membase + SE_UART_TX_TRANS_CFG); + writel(tx_parity_cfg, uport->membase + SE_UART_TX_PARITY_CFG); + writel(rx_trans_cfg, uport->membase + SE_UART_RX_TRANS_CFG); + writel(rx_parity_cfg, uport->membase + SE_UART_RX_PARITY_CFG); + writel(bits_per_char, uport->membase + SE_UART_TX_WORD_LEN); + writel(bits_per_char, uport->membase + SE_UART_RX_WORD_LEN); + writel(stop_bit_len, uport->membase + SE_UART_TX_STOP_BIT_LEN); + + dev->con->write = qcom_geni_serial_earlycon_write; + dev->con->setup = NULL; + qcom_geni_serial_enable_early_read(&se, dev->con); + + return 0; +} +OF_EARLYCON_DECLARE(qcom_geni, "qcom,geni-debug-uart", + qcom_geni_serial_earlycon_setup); + +static int __init console_register(struct uart_driver *drv) +{ + return uart_register_driver(drv); +} + +static void console_unregister(struct uart_driver *drv) +{ + uart_unregister_driver(drv); +} + +static struct console cons_ops = { + .name = "ttyMSM", + .write = qcom_geni_serial_console_write, + .device = uart_console_device, + .setup = qcom_geni_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &qcom_geni_console_driver, +}; + +static struct uart_driver qcom_geni_console_driver = { + .owner = THIS_MODULE, + .driver_name = "qcom_geni_console", + .dev_name = "ttyMSM", + .nr = GENI_UART_CONS_PORTS, + .cons = &cons_ops, +}; +#else +static int console_register(struct uart_driver *drv) +{ + return 0; +} + +static void console_unregister(struct uart_driver *drv) +{ +} +#endif /* CONFIG_SERIAL_QCOM_GENI_CONSOLE */ + +static struct uart_driver qcom_geni_uart_driver = { + .owner = THIS_MODULE, + .driver_name = "qcom_geni_uart", + .dev_name = "ttyHS", + .nr = GENI_UART_PORTS, +}; + +static void qcom_geni_serial_pm(struct uart_port *uport, + unsigned int new_state, unsigned int old_state) +{ + struct qcom_geni_serial_port *port = to_dev_port(uport, uport); + + /* If we've never been called, treat it as off */ + if (old_state == UART_PM_STATE_UNDEFINED) + old_state = UART_PM_STATE_OFF; + + if (new_state == UART_PM_STATE_ON && old_state == UART_PM_STATE_OFF) { + geni_icc_enable(&port->se); + if (port->clk_rate) + dev_pm_opp_set_rate(uport->dev, port->clk_rate); + geni_se_resources_on(&port->se); + } else if (new_state == UART_PM_STATE_OFF && + old_state == UART_PM_STATE_ON) { + geni_se_resources_off(&port->se); + dev_pm_opp_set_rate(uport->dev, 0); + geni_icc_disable(&port->se); + } +} + +static const struct uart_ops qcom_geni_console_pops = { + .tx_empty = qcom_geni_serial_tx_empty, + .stop_tx = qcom_geni_serial_stop_tx, + .start_tx = qcom_geni_serial_start_tx, + .stop_rx = qcom_geni_serial_stop_rx, + .start_rx = qcom_geni_serial_start_rx, + .set_termios = qcom_geni_serial_set_termios, + .startup = qcom_geni_serial_startup, + .request_port = qcom_geni_serial_request_port, + .config_port = qcom_geni_serial_config_port, + .shutdown = qcom_geni_serial_shutdown, + .type = qcom_geni_serial_get_type, + .set_mctrl = qcom_geni_serial_set_mctrl, + .get_mctrl = qcom_geni_serial_get_mctrl, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = qcom_geni_serial_get_char, + .poll_put_char = qcom_geni_serial_poll_put_char, +#endif + .pm = qcom_geni_serial_pm, +}; + +static const struct uart_ops qcom_geni_uart_pops = { + .tx_empty = qcom_geni_serial_tx_empty, + .stop_tx = qcom_geni_serial_stop_tx, + .start_tx = qcom_geni_serial_start_tx, + .stop_rx = qcom_geni_serial_stop_rx, + .set_termios = qcom_geni_serial_set_termios, + .startup = qcom_geni_serial_startup, + .request_port = qcom_geni_serial_request_port, + .config_port = qcom_geni_serial_config_port, + .shutdown = qcom_geni_serial_shutdown, + .type = qcom_geni_serial_get_type, + .set_mctrl = qcom_geni_serial_set_mctrl, + .get_mctrl = qcom_geni_serial_get_mctrl, + .pm = qcom_geni_serial_pm, +}; + +static int qcom_geni_serial_probe(struct platform_device *pdev) +{ + int ret = 0; + int line; + struct qcom_geni_serial_port *port; + struct uart_port *uport; + struct resource *res; + int irq; + bool console = false; + struct uart_driver *drv; + + if (of_device_is_compatible(pdev->dev.of_node, "qcom,geni-debug-uart")) + console = true; + + if (console) { + drv = &qcom_geni_console_driver; + line = of_alias_get_id(pdev->dev.of_node, "serial"); + } else { + drv = &qcom_geni_uart_driver; + line = of_alias_get_id(pdev->dev.of_node, "serial"); + if (line == -ENODEV) /* compat with non-standard aliases */ + line = of_alias_get_id(pdev->dev.of_node, "hsuart"); + } + + port = get_port_from_line(line, console); + if (IS_ERR(port)) { + dev_err(&pdev->dev, "Invalid line %d\n", line); + return PTR_ERR(port); + } + + uport = &port->uport; + /* Don't allow 2 drivers to access the same port */ + if (uport->private_data) + return -ENODEV; + + uport->dev = &pdev->dev; + port->se.dev = &pdev->dev; + port->se.wrapper = dev_get_drvdata(pdev->dev.parent); + port->se.clk = devm_clk_get(&pdev->dev, "se"); + if (IS_ERR(port->se.clk)) { + ret = PTR_ERR(port->se.clk); + dev_err(&pdev->dev, "Err getting SE Core clk %d\n", ret); + return ret; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -EINVAL; + uport->mapbase = res->start; + + port->tx_fifo_depth = DEF_FIFO_DEPTH_WORDS; + port->rx_fifo_depth = DEF_FIFO_DEPTH_WORDS; + port->tx_fifo_width = DEF_FIFO_WIDTH_BITS; + + if (!console) { + port->rx_fifo = devm_kcalloc(uport->dev, + port->rx_fifo_depth, sizeof(u32), GFP_KERNEL); + if (!port->rx_fifo) + return -ENOMEM; + } + + ret = geni_icc_get(&port->se, NULL); + if (ret) + return ret; + port->se.icc_paths[GENI_TO_CORE].avg_bw = GENI_DEFAULT_BW; + port->se.icc_paths[CPU_TO_GENI].avg_bw = GENI_DEFAULT_BW; + + /* Set BW for register access */ + ret = geni_icc_set_bw(&port->se); + if (ret) + return ret; + + port->name = devm_kasprintf(uport->dev, GFP_KERNEL, + "qcom_geni_serial_%s%d", + uart_console(uport) ? "console" : "uart", uport->line); + if (!port->name) + return -ENOMEM; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + uport->irq = irq; + uport->has_sysrq = IS_ENABLED(CONFIG_SERIAL_QCOM_GENI_CONSOLE); + + if (!console) + port->wakeup_irq = platform_get_irq_optional(pdev, 1); + + if (of_property_read_bool(pdev->dev.of_node, "rx-tx-swap")) + port->rx_tx_swap = true; + + if (of_property_read_bool(pdev->dev.of_node, "cts-rts-swap")) + port->cts_rts_swap = true; + + ret = devm_pm_opp_set_clkname(&pdev->dev, "se"); + if (ret) + return ret; + /* OPP table is optional */ + ret = devm_pm_opp_of_add_table(&pdev->dev); + if (ret && ret != -ENODEV) { + dev_err(&pdev->dev, "invalid OPP table in device tree\n"); + return ret; + } + + port->private_data.drv = drv; + uport->private_data = &port->private_data; + platform_set_drvdata(pdev, port); + port->handle_rx = console ? handle_rx_console : handle_rx_uart; + + irq_set_status_flags(uport->irq, IRQ_NOAUTOEN); + ret = devm_request_irq(uport->dev, uport->irq, qcom_geni_serial_isr, + IRQF_TRIGGER_HIGH, port->name, uport); + if (ret) { + dev_err(uport->dev, "Failed to get IRQ ret %d\n", ret); + return ret; + } + + ret = uart_add_one_port(drv, uport); + if (ret) + return ret; + + if (port->wakeup_irq > 0) { + device_init_wakeup(&pdev->dev, true); + ret = dev_pm_set_dedicated_wake_irq(&pdev->dev, + port->wakeup_irq); + if (ret) { + device_init_wakeup(&pdev->dev, false); + uart_remove_one_port(drv, uport); + return ret; + } + } + + return 0; +} + +static int qcom_geni_serial_remove(struct platform_device *pdev) +{ + struct qcom_geni_serial_port *port = platform_get_drvdata(pdev); + struct uart_driver *drv = port->private_data.drv; + + dev_pm_clear_wake_irq(&pdev->dev); + device_init_wakeup(&pdev->dev, false); + uart_remove_one_port(drv, &port->uport); + + return 0; +} + +static int __maybe_unused qcom_geni_serial_sys_suspend(struct device *dev) +{ + struct qcom_geni_serial_port *port = dev_get_drvdata(dev); + struct uart_port *uport = &port->uport; + struct qcom_geni_private_data *private_data = uport->private_data; + + /* + * This is done so we can hit the lowest possible state in suspend + * even with no_console_suspend + */ + if (uart_console(uport)) { + geni_icc_set_tag(&port->se, QCOM_ICC_TAG_ACTIVE_ONLY); + geni_icc_set_bw(&port->se); + } + return uart_suspend_port(private_data->drv, uport); +} + +static int __maybe_unused qcom_geni_serial_sys_resume(struct device *dev) +{ + int ret; + struct qcom_geni_serial_port *port = dev_get_drvdata(dev); + struct uart_port *uport = &port->uport; + struct qcom_geni_private_data *private_data = uport->private_data; + + ret = uart_resume_port(private_data->drv, uport); + if (uart_console(uport)) { + geni_icc_set_tag(&port->se, QCOM_ICC_TAG_ALWAYS); + geni_icc_set_bw(&port->se); + } + return ret; +} + +static const struct dev_pm_ops qcom_geni_serial_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(qcom_geni_serial_sys_suspend, + qcom_geni_serial_sys_resume) +}; + +static const struct of_device_id qcom_geni_serial_match_table[] = { + { .compatible = "qcom,geni-debug-uart", }, + { .compatible = "qcom,geni-uart", }, + {} +}; +MODULE_DEVICE_TABLE(of, qcom_geni_serial_match_table); + +static struct platform_driver qcom_geni_serial_platform_driver = { + .remove = qcom_geni_serial_remove, + .probe = qcom_geni_serial_probe, + .driver = { + .name = "qcom_geni_serial", + .of_match_table = qcom_geni_serial_match_table, + .pm = &qcom_geni_serial_pm_ops, + }, +}; + +static int __init qcom_geni_serial_init(void) +{ + int ret; + + ret = console_register(&qcom_geni_console_driver); + if (ret) + return ret; + + ret = uart_register_driver(&qcom_geni_uart_driver); + if (ret) { + console_unregister(&qcom_geni_console_driver); + return ret; + } + + ret = platform_driver_register(&qcom_geni_serial_platform_driver); + if (ret) { + console_unregister(&qcom_geni_console_driver); + uart_unregister_driver(&qcom_geni_uart_driver); + } + return ret; +} +module_init(qcom_geni_serial_init); + +static void __exit qcom_geni_serial_exit(void) +{ + platform_driver_unregister(&qcom_geni_serial_platform_driver); + console_unregister(&qcom_geni_console_driver); + uart_unregister_driver(&qcom_geni_uart_driver); +} +module_exit(qcom_geni_serial_exit); + +MODULE_DESCRIPTION("Serial driver for GENI based QUP cores"); +MODULE_LICENSE("GPL v2"); |