summaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial/sh-sci.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial/sh-sci.c')
-rw-r--r--drivers/tty/serial/sh-sci.c3498
1 files changed, 3498 insertions, 0 deletions
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
new file mode 100644
index 000000000..e67d3a886
--- /dev/null
+++ b/drivers/tty/serial/sh-sci.c
@@ -0,0 +1,3498 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SuperH on-chip serial module support. (SCI with no FIFO / with FIFO)
+ *
+ * Copyright (C) 2002 - 2011 Paul Mundt
+ * Copyright (C) 2015 Glider bvba
+ * Modified to support SH7720 SCIF. Markus Brunner, Mark Jonas (Jul 2007).
+ *
+ * based off of the old drivers/char/sh-sci.c by:
+ *
+ * Copyright (C) 1999, 2000 Niibe Yutaka
+ * Copyright (C) 2000 Sugioka Toshinobu
+ * Modified to support multiple serial ports. Stuart Menefy (May 2000).
+ * Modified to support SecureEdge. David McCullough (2002)
+ * Modified to support SH7300 SCIF. Takashi Kusuda (Jun 2003).
+ * Removed SH7300 support (Jul 2007).
+ */
+#undef DEBUG
+
+#include <linux/clk.h>
+#include <linux/console.h>
+#include <linux/ctype.h>
+#include <linux/cpufreq.h>
+#include <linux/delay.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/ktime.h>
+#include <linux/major.h>
+#include <linux/minmax.h>
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/reset.h>
+#include <linux/scatterlist.h>
+#include <linux/serial.h>
+#include <linux/serial_sci.h>
+#include <linux/sh_dma.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/sysrq.h>
+#include <linux/timer.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+
+#ifdef CONFIG_SUPERH
+#include <asm/sh_bios.h>
+#include <asm/platform_early.h>
+#endif
+
+#include "serial_mctrl_gpio.h"
+#include "sh-sci.h"
+
+/* Offsets into the sci_port->irqs array */
+enum {
+ SCIx_ERI_IRQ,
+ SCIx_RXI_IRQ,
+ SCIx_TXI_IRQ,
+ SCIx_BRI_IRQ,
+ SCIx_DRI_IRQ,
+ SCIx_TEI_IRQ,
+ SCIx_NR_IRQS,
+
+ SCIx_MUX_IRQ = SCIx_NR_IRQS, /* special case */
+};
+
+#define SCIx_IRQ_IS_MUXED(port) \
+ ((port)->irqs[SCIx_ERI_IRQ] == \
+ (port)->irqs[SCIx_RXI_IRQ]) || \
+ ((port)->irqs[SCIx_ERI_IRQ] && \
+ ((port)->irqs[SCIx_RXI_IRQ] < 0))
+
+enum SCI_CLKS {
+ SCI_FCK, /* Functional Clock */
+ SCI_SCK, /* Optional External Clock */
+ SCI_BRG_INT, /* Optional BRG Internal Clock Source */
+ SCI_SCIF_CLK, /* Optional BRG External Clock Source */
+ SCI_NUM_CLKS
+};
+
+/* Bit x set means sampling rate x + 1 is supported */
+#define SCI_SR(x) BIT((x) - 1)
+#define SCI_SR_RANGE(x, y) GENMASK((y) - 1, (x) - 1)
+
+#define SCI_SR_SCIFAB SCI_SR(5) | SCI_SR(7) | SCI_SR(11) | \
+ SCI_SR(13) | SCI_SR(16) | SCI_SR(17) | \
+ SCI_SR(19) | SCI_SR(27)
+
+#define min_sr(_port) ffs((_port)->sampling_rate_mask)
+#define max_sr(_port) fls((_port)->sampling_rate_mask)
+
+/* Iterate over all supported sampling rates, from high to low */
+#define for_each_sr(_sr, _port) \
+ for ((_sr) = max_sr(_port); (_sr) >= min_sr(_port); (_sr)--) \
+ if ((_port)->sampling_rate_mask & SCI_SR((_sr)))
+
+struct plat_sci_reg {
+ u8 offset, size;
+};
+
+struct sci_port_params {
+ const struct plat_sci_reg regs[SCIx_NR_REGS];
+ unsigned int fifosize;
+ unsigned int overrun_reg;
+ unsigned int overrun_mask;
+ unsigned int sampling_rate_mask;
+ unsigned int error_mask;
+ unsigned int error_clear;
+};
+
+struct sci_port {
+ struct uart_port port;
+
+ /* Platform configuration */
+ const struct sci_port_params *params;
+ const struct plat_sci_port *cfg;
+ unsigned int sampling_rate_mask;
+ resource_size_t reg_size;
+ struct mctrl_gpios *gpios;
+
+ /* Clocks */
+ struct clk *clks[SCI_NUM_CLKS];
+ unsigned long clk_rates[SCI_NUM_CLKS];
+
+ int irqs[SCIx_NR_IRQS];
+ char *irqstr[SCIx_NR_IRQS];
+
+ struct dma_chan *chan_tx;
+ struct dma_chan *chan_rx;
+
+#ifdef CONFIG_SERIAL_SH_SCI_DMA
+ struct dma_chan *chan_tx_saved;
+ struct dma_chan *chan_rx_saved;
+ dma_cookie_t cookie_tx;
+ dma_cookie_t cookie_rx[2];
+ dma_cookie_t active_rx;
+ dma_addr_t tx_dma_addr;
+ unsigned int tx_dma_len;
+ struct scatterlist sg_rx[2];
+ void *rx_buf[2];
+ size_t buf_len_rx;
+ struct work_struct work_tx;
+ struct hrtimer rx_timer;
+ unsigned int rx_timeout; /* microseconds */
+#endif
+ unsigned int rx_frame;
+ int rx_trigger;
+ struct timer_list rx_fifo_timer;
+ int rx_fifo_timeout;
+ u16 hscif_tot;
+
+ bool has_rtscts;
+ bool autorts;
+};
+
+#define SCI_NPORTS CONFIG_SERIAL_SH_SCI_NR_UARTS
+
+static struct sci_port sci_ports[SCI_NPORTS];
+static unsigned long sci_ports_in_use;
+static struct uart_driver sci_uart_driver;
+
+static inline struct sci_port *
+to_sci_port(struct uart_port *uart)
+{
+ return container_of(uart, struct sci_port, port);
+}
+
+static const struct sci_port_params sci_port_params[SCIx_NR_REGTYPES] = {
+ /*
+ * Common SCI definitions, dependent on the port's regshift
+ * value.
+ */
+ [SCIx_SCI_REGTYPE] = {
+ .regs = {
+ [SCSMR] = { 0x00, 8 },
+ [SCBRR] = { 0x01, 8 },
+ [SCSCR] = { 0x02, 8 },
+ [SCxTDR] = { 0x03, 8 },
+ [SCxSR] = { 0x04, 8 },
+ [SCxRDR] = { 0x05, 8 },
+ },
+ .fifosize = 1,
+ .overrun_reg = SCxSR,
+ .overrun_mask = SCI_ORER,
+ .sampling_rate_mask = SCI_SR(32),
+ .error_mask = SCI_DEFAULT_ERROR_MASK | SCI_ORER,
+ .error_clear = SCI_ERROR_CLEAR & ~SCI_ORER,
+ },
+
+ /*
+ * Common definitions for legacy IrDA ports.
+ */
+ [SCIx_IRDA_REGTYPE] = {
+ .regs = {
+ [SCSMR] = { 0x00, 8 },
+ [SCBRR] = { 0x02, 8 },
+ [SCSCR] = { 0x04, 8 },
+ [SCxTDR] = { 0x06, 8 },
+ [SCxSR] = { 0x08, 16 },
+ [SCxRDR] = { 0x0a, 8 },
+ [SCFCR] = { 0x0c, 8 },
+ [SCFDR] = { 0x0e, 16 },
+ },
+ .fifosize = 1,
+ .overrun_reg = SCxSR,
+ .overrun_mask = SCI_ORER,
+ .sampling_rate_mask = SCI_SR(32),
+ .error_mask = SCI_DEFAULT_ERROR_MASK | SCI_ORER,
+ .error_clear = SCI_ERROR_CLEAR & ~SCI_ORER,
+ },
+
+ /*
+ * Common SCIFA definitions.
+ */
+ [SCIx_SCIFA_REGTYPE] = {
+ .regs = {
+ [SCSMR] = { 0x00, 16 },
+ [SCBRR] = { 0x04, 8 },
+ [SCSCR] = { 0x08, 16 },
+ [SCxTDR] = { 0x20, 8 },
+ [SCxSR] = { 0x14, 16 },
+ [SCxRDR] = { 0x24, 8 },
+ [SCFCR] = { 0x18, 16 },
+ [SCFDR] = { 0x1c, 16 },
+ [SCPCR] = { 0x30, 16 },
+ [SCPDR] = { 0x34, 16 },
+ },
+ .fifosize = 64,
+ .overrun_reg = SCxSR,
+ .overrun_mask = SCIFA_ORER,
+ .sampling_rate_mask = SCI_SR_SCIFAB,
+ .error_mask = SCIF_DEFAULT_ERROR_MASK | SCIFA_ORER,
+ .error_clear = SCIF_ERROR_CLEAR & ~SCIFA_ORER,
+ },
+
+ /*
+ * Common SCIFB definitions.
+ */
+ [SCIx_SCIFB_REGTYPE] = {
+ .regs = {
+ [SCSMR] = { 0x00, 16 },
+ [SCBRR] = { 0x04, 8 },
+ [SCSCR] = { 0x08, 16 },
+ [SCxTDR] = { 0x40, 8 },
+ [SCxSR] = { 0x14, 16 },
+ [SCxRDR] = { 0x60, 8 },
+ [SCFCR] = { 0x18, 16 },
+ [SCTFDR] = { 0x38, 16 },
+ [SCRFDR] = { 0x3c, 16 },
+ [SCPCR] = { 0x30, 16 },
+ [SCPDR] = { 0x34, 16 },
+ },
+ .fifosize = 256,
+ .overrun_reg = SCxSR,
+ .overrun_mask = SCIFA_ORER,
+ .sampling_rate_mask = SCI_SR_SCIFAB,
+ .error_mask = SCIF_DEFAULT_ERROR_MASK | SCIFA_ORER,
+ .error_clear = SCIF_ERROR_CLEAR & ~SCIFA_ORER,
+ },
+
+ /*
+ * Common SH-2(A) SCIF definitions for ports with FIFO data
+ * count registers.
+ */
+ [SCIx_SH2_SCIF_FIFODATA_REGTYPE] = {
+ .regs = {
+ [SCSMR] = { 0x00, 16 },
+ [SCBRR] = { 0x04, 8 },
+ [SCSCR] = { 0x08, 16 },
+ [SCxTDR] = { 0x0c, 8 },
+ [SCxSR] = { 0x10, 16 },
+ [SCxRDR] = { 0x14, 8 },
+ [SCFCR] = { 0x18, 16 },
+ [SCFDR] = { 0x1c, 16 },
+ [SCSPTR] = { 0x20, 16 },
+ [SCLSR] = { 0x24, 16 },
+ },
+ .fifosize = 16,
+ .overrun_reg = SCLSR,
+ .overrun_mask = SCLSR_ORER,
+ .sampling_rate_mask = SCI_SR(32),
+ .error_mask = SCIF_DEFAULT_ERROR_MASK,
+ .error_clear = SCIF_ERROR_CLEAR,
+ },
+
+ /*
+ * The "SCIFA" that is in RZ/A2, RZ/G2L and RZ/T.
+ * It looks like a normal SCIF with FIFO data, but with a
+ * compressed address space. Also, the break out of interrupts
+ * are different: ERI/BRI, RXI, TXI, TEI, DRI.
+ */
+ [SCIx_RZ_SCIFA_REGTYPE] = {
+ .regs = {
+ [SCSMR] = { 0x00, 16 },
+ [SCBRR] = { 0x02, 8 },
+ [SCSCR] = { 0x04, 16 },
+ [SCxTDR] = { 0x06, 8 },
+ [SCxSR] = { 0x08, 16 },
+ [SCxRDR] = { 0x0A, 8 },
+ [SCFCR] = { 0x0C, 16 },
+ [SCFDR] = { 0x0E, 16 },
+ [SCSPTR] = { 0x10, 16 },
+ [SCLSR] = { 0x12, 16 },
+ [SEMR] = { 0x14, 8 },
+ },
+ .fifosize = 16,
+ .overrun_reg = SCLSR,
+ .overrun_mask = SCLSR_ORER,
+ .sampling_rate_mask = SCI_SR(32),
+ .error_mask = SCIF_DEFAULT_ERROR_MASK,
+ .error_clear = SCIF_ERROR_CLEAR,
+ },
+
+ /*
+ * Common SH-3 SCIF definitions.
+ */
+ [SCIx_SH3_SCIF_REGTYPE] = {
+ .regs = {
+ [SCSMR] = { 0x00, 8 },
+ [SCBRR] = { 0x02, 8 },
+ [SCSCR] = { 0x04, 8 },
+ [SCxTDR] = { 0x06, 8 },
+ [SCxSR] = { 0x08, 16 },
+ [SCxRDR] = { 0x0a, 8 },
+ [SCFCR] = { 0x0c, 8 },
+ [SCFDR] = { 0x0e, 16 },
+ },
+ .fifosize = 16,
+ .overrun_reg = SCLSR,
+ .overrun_mask = SCLSR_ORER,
+ .sampling_rate_mask = SCI_SR(32),
+ .error_mask = SCIF_DEFAULT_ERROR_MASK,
+ .error_clear = SCIF_ERROR_CLEAR,
+ },
+
+ /*
+ * Common SH-4(A) SCIF(B) definitions.
+ */
+ [SCIx_SH4_SCIF_REGTYPE] = {
+ .regs = {
+ [SCSMR] = { 0x00, 16 },
+ [SCBRR] = { 0x04, 8 },
+ [SCSCR] = { 0x08, 16 },
+ [SCxTDR] = { 0x0c, 8 },
+ [SCxSR] = { 0x10, 16 },
+ [SCxRDR] = { 0x14, 8 },
+ [SCFCR] = { 0x18, 16 },
+ [SCFDR] = { 0x1c, 16 },
+ [SCSPTR] = { 0x20, 16 },
+ [SCLSR] = { 0x24, 16 },
+ },
+ .fifosize = 16,
+ .overrun_reg = SCLSR,
+ .overrun_mask = SCLSR_ORER,
+ .sampling_rate_mask = SCI_SR(32),
+ .error_mask = SCIF_DEFAULT_ERROR_MASK,
+ .error_clear = SCIF_ERROR_CLEAR,
+ },
+
+ /*
+ * Common SCIF definitions for ports with a Baud Rate Generator for
+ * External Clock (BRG).
+ */
+ [SCIx_SH4_SCIF_BRG_REGTYPE] = {
+ .regs = {
+ [SCSMR] = { 0x00, 16 },
+ [SCBRR] = { 0x04, 8 },
+ [SCSCR] = { 0x08, 16 },
+ [SCxTDR] = { 0x0c, 8 },
+ [SCxSR] = { 0x10, 16 },
+ [SCxRDR] = { 0x14, 8 },
+ [SCFCR] = { 0x18, 16 },
+ [SCFDR] = { 0x1c, 16 },
+ [SCSPTR] = { 0x20, 16 },
+ [SCLSR] = { 0x24, 16 },
+ [SCDL] = { 0x30, 16 },
+ [SCCKS] = { 0x34, 16 },
+ },
+ .fifosize = 16,
+ .overrun_reg = SCLSR,
+ .overrun_mask = SCLSR_ORER,
+ .sampling_rate_mask = SCI_SR(32),
+ .error_mask = SCIF_DEFAULT_ERROR_MASK,
+ .error_clear = SCIF_ERROR_CLEAR,
+ },
+
+ /*
+ * Common HSCIF definitions.
+ */
+ [SCIx_HSCIF_REGTYPE] = {
+ .regs = {
+ [SCSMR] = { 0x00, 16 },
+ [SCBRR] = { 0x04, 8 },
+ [SCSCR] = { 0x08, 16 },
+ [SCxTDR] = { 0x0c, 8 },
+ [SCxSR] = { 0x10, 16 },
+ [SCxRDR] = { 0x14, 8 },
+ [SCFCR] = { 0x18, 16 },
+ [SCFDR] = { 0x1c, 16 },
+ [SCSPTR] = { 0x20, 16 },
+ [SCLSR] = { 0x24, 16 },
+ [HSSRR] = { 0x40, 16 },
+ [SCDL] = { 0x30, 16 },
+ [SCCKS] = { 0x34, 16 },
+ [HSRTRGR] = { 0x54, 16 },
+ [HSTTRGR] = { 0x58, 16 },
+ },
+ .fifosize = 128,
+ .overrun_reg = SCLSR,
+ .overrun_mask = SCLSR_ORER,
+ .sampling_rate_mask = SCI_SR_RANGE(8, 32),
+ .error_mask = SCIF_DEFAULT_ERROR_MASK,
+ .error_clear = SCIF_ERROR_CLEAR,
+ },
+
+ /*
+ * Common SH-4(A) SCIF(B) definitions for ports without an SCSPTR
+ * register.
+ */
+ [SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE] = {
+ .regs = {
+ [SCSMR] = { 0x00, 16 },
+ [SCBRR] = { 0x04, 8 },
+ [SCSCR] = { 0x08, 16 },
+ [SCxTDR] = { 0x0c, 8 },
+ [SCxSR] = { 0x10, 16 },
+ [SCxRDR] = { 0x14, 8 },
+ [SCFCR] = { 0x18, 16 },
+ [SCFDR] = { 0x1c, 16 },
+ [SCLSR] = { 0x24, 16 },
+ },
+ .fifosize = 16,
+ .overrun_reg = SCLSR,
+ .overrun_mask = SCLSR_ORER,
+ .sampling_rate_mask = SCI_SR(32),
+ .error_mask = SCIF_DEFAULT_ERROR_MASK,
+ .error_clear = SCIF_ERROR_CLEAR,
+ },
+
+ /*
+ * Common SH-4(A) SCIF(B) definitions for ports with FIFO data
+ * count registers.
+ */
+ [SCIx_SH4_SCIF_FIFODATA_REGTYPE] = {
+ .regs = {
+ [SCSMR] = { 0x00, 16 },
+ [SCBRR] = { 0x04, 8 },
+ [SCSCR] = { 0x08, 16 },
+ [SCxTDR] = { 0x0c, 8 },
+ [SCxSR] = { 0x10, 16 },
+ [SCxRDR] = { 0x14, 8 },
+ [SCFCR] = { 0x18, 16 },
+ [SCFDR] = { 0x1c, 16 },
+ [SCTFDR] = { 0x1c, 16 }, /* aliased to SCFDR */
+ [SCRFDR] = { 0x20, 16 },
+ [SCSPTR] = { 0x24, 16 },
+ [SCLSR] = { 0x28, 16 },
+ },
+ .fifosize = 16,
+ .overrun_reg = SCLSR,
+ .overrun_mask = SCLSR_ORER,
+ .sampling_rate_mask = SCI_SR(32),
+ .error_mask = SCIF_DEFAULT_ERROR_MASK,
+ .error_clear = SCIF_ERROR_CLEAR,
+ },
+
+ /*
+ * SH7705-style SCIF(B) ports, lacking both SCSPTR and SCLSR
+ * registers.
+ */
+ [SCIx_SH7705_SCIF_REGTYPE] = {
+ .regs = {
+ [SCSMR] = { 0x00, 16 },
+ [SCBRR] = { 0x04, 8 },
+ [SCSCR] = { 0x08, 16 },
+ [SCxTDR] = { 0x20, 8 },
+ [SCxSR] = { 0x14, 16 },
+ [SCxRDR] = { 0x24, 8 },
+ [SCFCR] = { 0x18, 16 },
+ [SCFDR] = { 0x1c, 16 },
+ },
+ .fifosize = 64,
+ .overrun_reg = SCxSR,
+ .overrun_mask = SCIFA_ORER,
+ .sampling_rate_mask = SCI_SR(16),
+ .error_mask = SCIF_DEFAULT_ERROR_MASK | SCIFA_ORER,
+ .error_clear = SCIF_ERROR_CLEAR & ~SCIFA_ORER,
+ },
+};
+
+#define sci_getreg(up, offset) (&to_sci_port(up)->params->regs[offset])
+
+/*
+ * The "offset" here is rather misleading, in that it refers to an enum
+ * value relative to the port mapping rather than the fixed offset
+ * itself, which needs to be manually retrieved from the platform's
+ * register map for the given port.
+ */
+static unsigned int sci_serial_in(struct uart_port *p, int offset)
+{
+ const struct plat_sci_reg *reg = sci_getreg(p, offset);
+
+ if (reg->size == 8)
+ return ioread8(p->membase + (reg->offset << p->regshift));
+ else if (reg->size == 16)
+ return ioread16(p->membase + (reg->offset << p->regshift));
+ else
+ WARN(1, "Invalid register access\n");
+
+ return 0;
+}
+
+static void sci_serial_out(struct uart_port *p, int offset, int value)
+{
+ const struct plat_sci_reg *reg = sci_getreg(p, offset);
+
+ if (reg->size == 8)
+ iowrite8(value, p->membase + (reg->offset << p->regshift));
+ else if (reg->size == 16)
+ iowrite16(value, p->membase + (reg->offset << p->regshift));
+ else
+ WARN(1, "Invalid register access\n");
+}
+
+static void sci_port_enable(struct sci_port *sci_port)
+{
+ unsigned int i;
+
+ if (!sci_port->port.dev)
+ return;
+
+ pm_runtime_get_sync(sci_port->port.dev);
+
+ for (i = 0; i < SCI_NUM_CLKS; i++) {
+ clk_prepare_enable(sci_port->clks[i]);
+ sci_port->clk_rates[i] = clk_get_rate(sci_port->clks[i]);
+ }
+ sci_port->port.uartclk = sci_port->clk_rates[SCI_FCK];
+}
+
+static void sci_port_disable(struct sci_port *sci_port)
+{
+ unsigned int i;
+
+ if (!sci_port->port.dev)
+ return;
+
+ for (i = SCI_NUM_CLKS; i-- > 0; )
+ clk_disable_unprepare(sci_port->clks[i]);
+
+ pm_runtime_put_sync(sci_port->port.dev);
+}
+
+static inline unsigned long port_rx_irq_mask(struct uart_port *port)
+{
+ /*
+ * Not all ports (such as SCIFA) will support REIE. Rather than
+ * special-casing the port type, we check the port initialization
+ * IRQ enable mask to see whether the IRQ is desired at all. If
+ * it's unset, it's logically inferred that there's no point in
+ * testing for it.
+ */
+ return SCSCR_RIE | (to_sci_port(port)->cfg->scscr & SCSCR_REIE);
+}
+
+static void sci_start_tx(struct uart_port *port)
+{
+ struct sci_port *s = to_sci_port(port);
+ unsigned short ctrl;
+
+#ifdef CONFIG_SERIAL_SH_SCI_DMA
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
+ u16 new, scr = serial_port_in(port, SCSCR);
+ if (s->chan_tx)
+ new = scr | SCSCR_TDRQE;
+ else
+ new = scr & ~SCSCR_TDRQE;
+ if (new != scr)
+ serial_port_out(port, SCSCR, new);
+ }
+
+ if (s->chan_tx && !uart_circ_empty(&s->port.state->xmit) &&
+ dma_submit_error(s->cookie_tx)) {
+ s->cookie_tx = 0;
+ schedule_work(&s->work_tx);
+ }
+#endif
+
+ if (!s->chan_tx || port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
+ /* Set TIE (Transmit Interrupt Enable) bit in SCSCR */
+ ctrl = serial_port_in(port, SCSCR);
+ serial_port_out(port, SCSCR, ctrl | SCSCR_TIE);
+ }
+}
+
+static void sci_stop_tx(struct uart_port *port)
+{
+ unsigned short ctrl;
+
+ /* Clear TIE (Transmit Interrupt Enable) bit in SCSCR */
+ ctrl = serial_port_in(port, SCSCR);
+
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
+ ctrl &= ~SCSCR_TDRQE;
+
+ ctrl &= ~SCSCR_TIE;
+
+ serial_port_out(port, SCSCR, ctrl);
+
+#ifdef CONFIG_SERIAL_SH_SCI_DMA
+ if (to_sci_port(port)->chan_tx &&
+ !dma_submit_error(to_sci_port(port)->cookie_tx)) {
+ dmaengine_terminate_async(to_sci_port(port)->chan_tx);
+ to_sci_port(port)->cookie_tx = -EINVAL;
+ }
+#endif
+}
+
+static void sci_start_rx(struct uart_port *port)
+{
+ unsigned short ctrl;
+
+ ctrl = serial_port_in(port, SCSCR) | port_rx_irq_mask(port);
+
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
+ ctrl &= ~SCSCR_RDRQE;
+
+ serial_port_out(port, SCSCR, ctrl);
+}
+
+static void sci_stop_rx(struct uart_port *port)
+{
+ unsigned short ctrl;
+
+ ctrl = serial_port_in(port, SCSCR);
+
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
+ ctrl &= ~SCSCR_RDRQE;
+
+ ctrl &= ~port_rx_irq_mask(port);
+
+ serial_port_out(port, SCSCR, ctrl);
+}
+
+static void sci_clear_SCxSR(struct uart_port *port, unsigned int mask)
+{
+ if (port->type == PORT_SCI) {
+ /* Just store the mask */
+ serial_port_out(port, SCxSR, mask);
+ } else if (to_sci_port(port)->params->overrun_mask == SCIFA_ORER) {
+ /* SCIFA/SCIFB and SCIF on SH7705/SH7720/SH7721 */
+ /* Only clear the status bits we want to clear */
+ serial_port_out(port, SCxSR,
+ serial_port_in(port, SCxSR) & mask);
+ } else {
+ /* Store the mask, clear parity/framing errors */
+ serial_port_out(port, SCxSR, mask & ~(SCIF_FERC | SCIF_PERC));
+ }
+}
+
+#if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_SH_SCI_CONSOLE) || \
+ defined(CONFIG_SERIAL_SH_SCI_EARLYCON)
+
+#ifdef CONFIG_CONSOLE_POLL
+static int sci_poll_get_char(struct uart_port *port)
+{
+ unsigned short status;
+ int c;
+
+ do {
+ status = serial_port_in(port, SCxSR);
+ if (status & SCxSR_ERRORS(port)) {
+ sci_clear_SCxSR(port, SCxSR_ERROR_CLEAR(port));
+ continue;
+ }
+ break;
+ } while (1);
+
+ if (!(status & SCxSR_RDxF(port)))
+ return NO_POLL_CHAR;
+
+ c = serial_port_in(port, SCxRDR);
+
+ /* Dummy read */
+ serial_port_in(port, SCxSR);
+ sci_clear_SCxSR(port, SCxSR_RDxF_CLEAR(port));
+
+ return c;
+}
+#endif
+
+static void sci_poll_put_char(struct uart_port *port, unsigned char c)
+{
+ unsigned short status;
+
+ do {
+ status = serial_port_in(port, SCxSR);
+ } while (!(status & SCxSR_TDxE(port)));
+
+ serial_port_out(port, SCxTDR, c);
+ sci_clear_SCxSR(port, SCxSR_TDxE_CLEAR(port) & ~SCxSR_TEND(port));
+}
+#endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_SH_SCI_CONSOLE ||
+ CONFIG_SERIAL_SH_SCI_EARLYCON */
+
+static void sci_init_pins(struct uart_port *port, unsigned int cflag)
+{
+ struct sci_port *s = to_sci_port(port);
+
+ /*
+ * Use port-specific handler if provided.
+ */
+ if (s->cfg->ops && s->cfg->ops->init_pins) {
+ s->cfg->ops->init_pins(port, cflag);
+ return;
+ }
+
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
+ u16 data = serial_port_in(port, SCPDR);
+ u16 ctrl = serial_port_in(port, SCPCR);
+
+ /* Enable RXD and TXD pin functions */
+ ctrl &= ~(SCPCR_RXDC | SCPCR_TXDC);
+ if (to_sci_port(port)->has_rtscts) {
+ /* RTS# is output, active low, unless autorts */
+ if (!(port->mctrl & TIOCM_RTS)) {
+ ctrl |= SCPCR_RTSC;
+ data |= SCPDR_RTSD;
+ } else if (!s->autorts) {
+ ctrl |= SCPCR_RTSC;
+ data &= ~SCPDR_RTSD;
+ } else {
+ /* Enable RTS# pin function */
+ ctrl &= ~SCPCR_RTSC;
+ }
+ /* Enable CTS# pin function */
+ ctrl &= ~SCPCR_CTSC;
+ }
+ serial_port_out(port, SCPDR, data);
+ serial_port_out(port, SCPCR, ctrl);
+ } else if (sci_getreg(port, SCSPTR)->size) {
+ u16 status = serial_port_in(port, SCSPTR);
+
+ /* RTS# is always output; and active low, unless autorts */
+ status |= SCSPTR_RTSIO;
+ if (!(port->mctrl & TIOCM_RTS))
+ status |= SCSPTR_RTSDT;
+ else if (!s->autorts)
+ status &= ~SCSPTR_RTSDT;
+ /* CTS# and SCK are inputs */
+ status &= ~(SCSPTR_CTSIO | SCSPTR_SCKIO);
+ serial_port_out(port, SCSPTR, status);
+ }
+}
+
+static int sci_txfill(struct uart_port *port)
+{
+ struct sci_port *s = to_sci_port(port);
+ unsigned int fifo_mask = (s->params->fifosize << 1) - 1;
+ const struct plat_sci_reg *reg;
+
+ reg = sci_getreg(port, SCTFDR);
+ if (reg->size)
+ return serial_port_in(port, SCTFDR) & fifo_mask;
+
+ reg = sci_getreg(port, SCFDR);
+ if (reg->size)
+ return serial_port_in(port, SCFDR) >> 8;
+
+ return !(serial_port_in(port, SCxSR) & SCI_TDRE);
+}
+
+static int sci_txroom(struct uart_port *port)
+{
+ return port->fifosize - sci_txfill(port);
+}
+
+static int sci_rxfill(struct uart_port *port)
+{
+ struct sci_port *s = to_sci_port(port);
+ unsigned int fifo_mask = (s->params->fifosize << 1) - 1;
+ const struct plat_sci_reg *reg;
+
+ reg = sci_getreg(port, SCRFDR);
+ if (reg->size)
+ return serial_port_in(port, SCRFDR) & fifo_mask;
+
+ reg = sci_getreg(port, SCFDR);
+ if (reg->size)
+ return serial_port_in(port, SCFDR) & fifo_mask;
+
+ return (serial_port_in(port, SCxSR) & SCxSR_RDxF(port)) != 0;
+}
+
+/* ********************************************************************** *
+ * the interrupt related routines *
+ * ********************************************************************** */
+
+static void sci_transmit_chars(struct uart_port *port)
+{
+ struct circ_buf *xmit = &port->state->xmit;
+ unsigned int stopped = uart_tx_stopped(port);
+ unsigned short status;
+ unsigned short ctrl;
+ int count;
+
+ status = serial_port_in(port, SCxSR);
+ if (!(status & SCxSR_TDxE(port))) {
+ ctrl = serial_port_in(port, SCSCR);
+ if (uart_circ_empty(xmit))
+ ctrl &= ~SCSCR_TIE;
+ else
+ ctrl |= SCSCR_TIE;
+ serial_port_out(port, SCSCR, ctrl);
+ return;
+ }
+
+ count = sci_txroom(port);
+
+ do {
+ unsigned char c;
+
+ if (port->x_char) {
+ c = port->x_char;
+ port->x_char = 0;
+ } else if (!uart_circ_empty(xmit) && !stopped) {
+ c = xmit->buf[xmit->tail];
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ } else {
+ break;
+ }
+
+ serial_port_out(port, SCxTDR, c);
+
+ port->icount.tx++;
+ } while (--count > 0);
+
+ sci_clear_SCxSR(port, SCxSR_TDxE_CLEAR(port));
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+ if (uart_circ_empty(xmit))
+ sci_stop_tx(port);
+
+}
+
+static void sci_receive_chars(struct uart_port *port)
+{
+ struct tty_port *tport = &port->state->port;
+ int i, count, copied = 0;
+ unsigned short status;
+ unsigned char flag;
+
+ status = serial_port_in(port, SCxSR);
+ if (!(status & SCxSR_RDxF(port)))
+ return;
+
+ while (1) {
+ /* Don't copy more bytes than there is room for in the buffer */
+ count = tty_buffer_request_room(tport, sci_rxfill(port));
+
+ /* If for any reason we can't copy more data, we're done! */
+ if (count == 0)
+ break;
+
+ if (port->type == PORT_SCI) {
+ char c = serial_port_in(port, SCxRDR);
+ if (uart_handle_sysrq_char(port, c))
+ count = 0;
+ else
+ tty_insert_flip_char(tport, c, TTY_NORMAL);
+ } else {
+ for (i = 0; i < count; i++) {
+ char c;
+
+ if (port->type == PORT_SCIF ||
+ port->type == PORT_HSCIF) {
+ status = serial_port_in(port, SCxSR);
+ c = serial_port_in(port, SCxRDR);
+ } else {
+ c = serial_port_in(port, SCxRDR);
+ status = serial_port_in(port, SCxSR);
+ }
+ if (uart_handle_sysrq_char(port, c)) {
+ count--; i--;
+ continue;
+ }
+
+ /* Store data and status */
+ if (status & SCxSR_FER(port)) {
+ flag = TTY_FRAME;
+ port->icount.frame++;
+ } else if (status & SCxSR_PER(port)) {
+ flag = TTY_PARITY;
+ port->icount.parity++;
+ } else
+ flag = TTY_NORMAL;
+
+ tty_insert_flip_char(tport, c, flag);
+ }
+ }
+
+ serial_port_in(port, SCxSR); /* dummy read */
+ sci_clear_SCxSR(port, SCxSR_RDxF_CLEAR(port));
+
+ copied += count;
+ port->icount.rx += count;
+ }
+
+ if (copied) {
+ /* Tell the rest of the system the news. New characters! */
+ tty_flip_buffer_push(tport);
+ } else {
+ /* TTY buffers full; read from RX reg to prevent lockup */
+ serial_port_in(port, SCxRDR);
+ serial_port_in(port, SCxSR); /* dummy read */
+ sci_clear_SCxSR(port, SCxSR_RDxF_CLEAR(port));
+ }
+}
+
+static int sci_handle_errors(struct uart_port *port)
+{
+ int copied = 0;
+ unsigned short status = serial_port_in(port, SCxSR);
+ struct tty_port *tport = &port->state->port;
+ struct sci_port *s = to_sci_port(port);
+
+ /* Handle overruns */
+ if (status & s->params->overrun_mask) {
+ port->icount.overrun++;
+
+ /* overrun error */
+ if (tty_insert_flip_char(tport, 0, TTY_OVERRUN))
+ copied++;
+ }
+
+ if (status & SCxSR_FER(port)) {
+ /* frame error */
+ port->icount.frame++;
+
+ if (tty_insert_flip_char(tport, 0, TTY_FRAME))
+ copied++;
+ }
+
+ if (status & SCxSR_PER(port)) {
+ /* parity error */
+ port->icount.parity++;
+
+ if (tty_insert_flip_char(tport, 0, TTY_PARITY))
+ copied++;
+ }
+
+ if (copied)
+ tty_flip_buffer_push(tport);
+
+ return copied;
+}
+
+static int sci_handle_fifo_overrun(struct uart_port *port)
+{
+ struct tty_port *tport = &port->state->port;
+ struct sci_port *s = to_sci_port(port);
+ const struct plat_sci_reg *reg;
+ int copied = 0;
+ u16 status;
+
+ reg = sci_getreg(port, s->params->overrun_reg);
+ if (!reg->size)
+ return 0;
+
+ status = serial_port_in(port, s->params->overrun_reg);
+ if (status & s->params->overrun_mask) {
+ status &= ~s->params->overrun_mask;
+ serial_port_out(port, s->params->overrun_reg, status);
+
+ port->icount.overrun++;
+
+ tty_insert_flip_char(tport, 0, TTY_OVERRUN);
+ tty_flip_buffer_push(tport);
+ copied++;
+ }
+
+ return copied;
+}
+
+static int sci_handle_breaks(struct uart_port *port)
+{
+ int copied = 0;
+ unsigned short status = serial_port_in(port, SCxSR);
+ struct tty_port *tport = &port->state->port;
+
+ if (uart_handle_break(port))
+ return 0;
+
+ if (status & SCxSR_BRK(port)) {
+ port->icount.brk++;
+
+ /* Notify of BREAK */
+ if (tty_insert_flip_char(tport, 0, TTY_BREAK))
+ copied++;
+ }
+
+ if (copied)
+ tty_flip_buffer_push(tport);
+
+ copied += sci_handle_fifo_overrun(port);
+
+ return copied;
+}
+
+static int scif_set_rtrg(struct uart_port *port, int rx_trig)
+{
+ unsigned int bits;
+
+ if (rx_trig >= port->fifosize)
+ rx_trig = port->fifosize - 1;
+ if (rx_trig < 1)
+ rx_trig = 1;
+
+ /* HSCIF can be set to an arbitrary level. */
+ if (sci_getreg(port, HSRTRGR)->size) {
+ serial_port_out(port, HSRTRGR, rx_trig);
+ return rx_trig;
+ }
+
+ switch (port->type) {
+ case PORT_SCIF:
+ if (rx_trig < 4) {
+ bits = 0;
+ rx_trig = 1;
+ } else if (rx_trig < 8) {
+ bits = SCFCR_RTRG0;
+ rx_trig = 4;
+ } else if (rx_trig < 14) {
+ bits = SCFCR_RTRG1;
+ rx_trig = 8;
+ } else {
+ bits = SCFCR_RTRG0 | SCFCR_RTRG1;
+ rx_trig = 14;
+ }
+ break;
+ case PORT_SCIFA:
+ case PORT_SCIFB:
+ if (rx_trig < 16) {
+ bits = 0;
+ rx_trig = 1;
+ } else if (rx_trig < 32) {
+ bits = SCFCR_RTRG0;
+ rx_trig = 16;
+ } else if (rx_trig < 48) {
+ bits = SCFCR_RTRG1;
+ rx_trig = 32;
+ } else {
+ bits = SCFCR_RTRG0 | SCFCR_RTRG1;
+ rx_trig = 48;
+ }
+ break;
+ default:
+ WARN(1, "unknown FIFO configuration");
+ return 1;
+ }
+
+ serial_port_out(port, SCFCR,
+ (serial_port_in(port, SCFCR) &
+ ~(SCFCR_RTRG1 | SCFCR_RTRG0)) | bits);
+
+ return rx_trig;
+}
+
+static int scif_rtrg_enabled(struct uart_port *port)
+{
+ if (sci_getreg(port, HSRTRGR)->size)
+ return serial_port_in(port, HSRTRGR) != 0;
+ else
+ return (serial_port_in(port, SCFCR) &
+ (SCFCR_RTRG0 | SCFCR_RTRG1)) != 0;
+}
+
+static void rx_fifo_timer_fn(struct timer_list *t)
+{
+ struct sci_port *s = from_timer(s, t, rx_fifo_timer);
+ struct uart_port *port = &s->port;
+
+ dev_dbg(port->dev, "Rx timed out\n");
+ scif_set_rtrg(port, 1);
+}
+
+static ssize_t rx_fifo_trigger_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct uart_port *port = dev_get_drvdata(dev);
+ struct sci_port *sci = to_sci_port(port);
+
+ return sprintf(buf, "%d\n", sci->rx_trigger);
+}
+
+static ssize_t rx_fifo_trigger_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct uart_port *port = dev_get_drvdata(dev);
+ struct sci_port *sci = to_sci_port(port);
+ int ret;
+ long r;
+
+ ret = kstrtol(buf, 0, &r);
+ if (ret)
+ return ret;
+
+ sci->rx_trigger = scif_set_rtrg(port, r);
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
+ scif_set_rtrg(port, 1);
+
+ return count;
+}
+
+static DEVICE_ATTR_RW(rx_fifo_trigger);
+
+static ssize_t rx_fifo_timeout_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct uart_port *port = dev_get_drvdata(dev);
+ struct sci_port *sci = to_sci_port(port);
+ int v;
+
+ if (port->type == PORT_HSCIF)
+ v = sci->hscif_tot >> HSSCR_TOT_SHIFT;
+ else
+ v = sci->rx_fifo_timeout;
+
+ return sprintf(buf, "%d\n", v);
+}
+
+static ssize_t rx_fifo_timeout_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ struct uart_port *port = dev_get_drvdata(dev);
+ struct sci_port *sci = to_sci_port(port);
+ int ret;
+ long r;
+
+ ret = kstrtol(buf, 0, &r);
+ if (ret)
+ return ret;
+
+ if (port->type == PORT_HSCIF) {
+ if (r < 0 || r > 3)
+ return -EINVAL;
+ sci->hscif_tot = r << HSSCR_TOT_SHIFT;
+ } else {
+ sci->rx_fifo_timeout = r;
+ scif_set_rtrg(port, 1);
+ if (r > 0)
+ timer_setup(&sci->rx_fifo_timer, rx_fifo_timer_fn, 0);
+ }
+
+ return count;
+}
+
+static DEVICE_ATTR_RW(rx_fifo_timeout);
+
+
+#ifdef CONFIG_SERIAL_SH_SCI_DMA
+static void sci_dma_tx_complete(void *arg)
+{
+ struct sci_port *s = arg;
+ struct uart_port *port = &s->port;
+ struct circ_buf *xmit = &port->state->xmit;
+ unsigned long flags;
+
+ dev_dbg(port->dev, "%s(%d)\n", __func__, port->line);
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ xmit->tail += s->tx_dma_len;
+ xmit->tail &= UART_XMIT_SIZE - 1;
+
+ port->icount.tx += s->tx_dma_len;
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+ if (!uart_circ_empty(xmit)) {
+ s->cookie_tx = 0;
+ schedule_work(&s->work_tx);
+ } else {
+ s->cookie_tx = -EINVAL;
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
+ u16 ctrl = serial_port_in(port, SCSCR);
+ serial_port_out(port, SCSCR, ctrl & ~SCSCR_TIE);
+ }
+ }
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+/* Locking: called with port lock held */
+static int sci_dma_rx_push(struct sci_port *s, void *buf, size_t count)
+{
+ struct uart_port *port = &s->port;
+ struct tty_port *tport = &port->state->port;
+ int copied;
+
+ copied = tty_insert_flip_string(tport, buf, count);
+ if (copied < count)
+ port->icount.buf_overrun++;
+
+ port->icount.rx += copied;
+
+ return copied;
+}
+
+static int sci_dma_rx_find_active(struct sci_port *s)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(s->cookie_rx); i++)
+ if (s->active_rx == s->cookie_rx[i])
+ return i;
+
+ return -1;
+}
+
+static void sci_dma_rx_chan_invalidate(struct sci_port *s)
+{
+ unsigned int i;
+
+ s->chan_rx = NULL;
+ for (i = 0; i < ARRAY_SIZE(s->cookie_rx); i++)
+ s->cookie_rx[i] = -EINVAL;
+ s->active_rx = 0;
+}
+
+static void sci_dma_rx_release(struct sci_port *s)
+{
+ struct dma_chan *chan = s->chan_rx_saved;
+
+ s->chan_rx_saved = NULL;
+ sci_dma_rx_chan_invalidate(s);
+ dmaengine_terminate_sync(chan);
+ dma_free_coherent(chan->device->dev, s->buf_len_rx * 2, s->rx_buf[0],
+ sg_dma_address(&s->sg_rx[0]));
+ dma_release_channel(chan);
+}
+
+static void start_hrtimer_us(struct hrtimer *hrt, unsigned long usec)
+{
+ long sec = usec / 1000000;
+ long nsec = (usec % 1000000) * 1000;
+ ktime_t t = ktime_set(sec, nsec);
+
+ hrtimer_start(hrt, t, HRTIMER_MODE_REL);
+}
+
+static void sci_dma_rx_reenable_irq(struct sci_port *s)
+{
+ struct uart_port *port = &s->port;
+ u16 scr;
+
+ /* Direct new serial port interrupts back to CPU */
+ scr = serial_port_in(port, SCSCR);
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
+ scr &= ~SCSCR_RDRQE;
+ enable_irq(s->irqs[SCIx_RXI_IRQ]);
+ }
+ serial_port_out(port, SCSCR, scr | SCSCR_RIE);
+}
+
+static void sci_dma_rx_complete(void *arg)
+{
+ struct sci_port *s = arg;
+ struct dma_chan *chan = s->chan_rx;
+ struct uart_port *port = &s->port;
+ struct dma_async_tx_descriptor *desc;
+ unsigned long flags;
+ int active, count = 0;
+
+ dev_dbg(port->dev, "%s(%d) active cookie %d\n", __func__, port->line,
+ s->active_rx);
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ active = sci_dma_rx_find_active(s);
+ if (active >= 0)
+ count = sci_dma_rx_push(s, s->rx_buf[active], s->buf_len_rx);
+
+ start_hrtimer_us(&s->rx_timer, s->rx_timeout);
+
+ if (count)
+ tty_flip_buffer_push(&port->state->port);
+
+ desc = dmaengine_prep_slave_sg(s->chan_rx, &s->sg_rx[active], 1,
+ DMA_DEV_TO_MEM,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!desc)
+ goto fail;
+
+ desc->callback = sci_dma_rx_complete;
+ desc->callback_param = s;
+ s->cookie_rx[active] = dmaengine_submit(desc);
+ if (dma_submit_error(s->cookie_rx[active]))
+ goto fail;
+
+ s->active_rx = s->cookie_rx[!active];
+
+ dma_async_issue_pending(chan);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+ dev_dbg(port->dev, "%s: cookie %d #%d, new active cookie %d\n",
+ __func__, s->cookie_rx[active], active, s->active_rx);
+ return;
+
+fail:
+ spin_unlock_irqrestore(&port->lock, flags);
+ dev_warn(port->dev, "Failed submitting Rx DMA descriptor\n");
+ /* Switch to PIO */
+ spin_lock_irqsave(&port->lock, flags);
+ dmaengine_terminate_async(chan);
+ sci_dma_rx_chan_invalidate(s);
+ sci_dma_rx_reenable_irq(s);
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void sci_dma_tx_release(struct sci_port *s)
+{
+ struct dma_chan *chan = s->chan_tx_saved;
+
+ cancel_work_sync(&s->work_tx);
+ s->chan_tx_saved = s->chan_tx = NULL;
+ s->cookie_tx = -EINVAL;
+ dmaengine_terminate_sync(chan);
+ dma_unmap_single(chan->device->dev, s->tx_dma_addr, UART_XMIT_SIZE,
+ DMA_TO_DEVICE);
+ dma_release_channel(chan);
+}
+
+static int sci_dma_rx_submit(struct sci_port *s, bool port_lock_held)
+{
+ struct dma_chan *chan = s->chan_rx;
+ struct uart_port *port = &s->port;
+ unsigned long flags;
+ int i;
+
+ for (i = 0; i < 2; i++) {
+ struct scatterlist *sg = &s->sg_rx[i];
+ struct dma_async_tx_descriptor *desc;
+
+ desc = dmaengine_prep_slave_sg(chan,
+ sg, 1, DMA_DEV_TO_MEM,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!desc)
+ goto fail;
+
+ desc->callback = sci_dma_rx_complete;
+ desc->callback_param = s;
+ s->cookie_rx[i] = dmaengine_submit(desc);
+ if (dma_submit_error(s->cookie_rx[i]))
+ goto fail;
+
+ }
+
+ s->active_rx = s->cookie_rx[0];
+
+ dma_async_issue_pending(chan);
+ return 0;
+
+fail:
+ /* Switch to PIO */
+ if (!port_lock_held)
+ spin_lock_irqsave(&port->lock, flags);
+ if (i)
+ dmaengine_terminate_async(chan);
+ sci_dma_rx_chan_invalidate(s);
+ sci_start_rx(port);
+ if (!port_lock_held)
+ spin_unlock_irqrestore(&port->lock, flags);
+ return -EAGAIN;
+}
+
+static void sci_dma_tx_work_fn(struct work_struct *work)
+{
+ struct sci_port *s = container_of(work, struct sci_port, work_tx);
+ struct dma_async_tx_descriptor *desc;
+ struct dma_chan *chan = s->chan_tx;
+ struct uart_port *port = &s->port;
+ struct circ_buf *xmit = &port->state->xmit;
+ unsigned long flags;
+ dma_addr_t buf;
+ int head, tail;
+
+ /*
+ * DMA is idle now.
+ * Port xmit buffer is already mapped, and it is one page... Just adjust
+ * offsets and lengths. Since it is a circular buffer, we have to
+ * transmit till the end, and then the rest. Take the port lock to get a
+ * consistent xmit buffer state.
+ */
+ spin_lock_irq(&port->lock);
+ head = xmit->head;
+ tail = xmit->tail;
+ buf = s->tx_dma_addr + tail;
+ s->tx_dma_len = CIRC_CNT_TO_END(head, tail, UART_XMIT_SIZE);
+ if (!s->tx_dma_len) {
+ /* Transmit buffer has been flushed */
+ spin_unlock_irq(&port->lock);
+ return;
+ }
+
+ desc = dmaengine_prep_slave_single(chan, buf, s->tx_dma_len,
+ DMA_MEM_TO_DEV,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!desc) {
+ spin_unlock_irq(&port->lock);
+ dev_warn(port->dev, "Failed preparing Tx DMA descriptor\n");
+ goto switch_to_pio;
+ }
+
+ dma_sync_single_for_device(chan->device->dev, buf, s->tx_dma_len,
+ DMA_TO_DEVICE);
+
+ desc->callback = sci_dma_tx_complete;
+ desc->callback_param = s;
+ s->cookie_tx = dmaengine_submit(desc);
+ if (dma_submit_error(s->cookie_tx)) {
+ spin_unlock_irq(&port->lock);
+ dev_warn(port->dev, "Failed submitting Tx DMA descriptor\n");
+ goto switch_to_pio;
+ }
+
+ spin_unlock_irq(&port->lock);
+ dev_dbg(port->dev, "%s: %p: %d...%d, cookie %d\n",
+ __func__, xmit->buf, tail, head, s->cookie_tx);
+
+ dma_async_issue_pending(chan);
+ return;
+
+switch_to_pio:
+ spin_lock_irqsave(&port->lock, flags);
+ s->chan_tx = NULL;
+ sci_start_tx(port);
+ spin_unlock_irqrestore(&port->lock, flags);
+ return;
+}
+
+static enum hrtimer_restart sci_dma_rx_timer_fn(struct hrtimer *t)
+{
+ struct sci_port *s = container_of(t, struct sci_port, rx_timer);
+ struct dma_chan *chan = s->chan_rx;
+ struct uart_port *port = &s->port;
+ struct dma_tx_state state;
+ enum dma_status status;
+ unsigned long flags;
+ unsigned int read;
+ int active, count;
+
+ dev_dbg(port->dev, "DMA Rx timed out\n");
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ active = sci_dma_rx_find_active(s);
+ if (active < 0) {
+ spin_unlock_irqrestore(&port->lock, flags);
+ return HRTIMER_NORESTART;
+ }
+
+ status = dmaengine_tx_status(s->chan_rx, s->active_rx, &state);
+ if (status == DMA_COMPLETE) {
+ spin_unlock_irqrestore(&port->lock, flags);
+ dev_dbg(port->dev, "Cookie %d #%d has already completed\n",
+ s->active_rx, active);
+
+ /* Let packet complete handler take care of the packet */
+ return HRTIMER_NORESTART;
+ }
+
+ dmaengine_pause(chan);
+
+ /*
+ * sometimes DMA transfer doesn't stop even if it is stopped and
+ * data keeps on coming until transaction is complete so check
+ * for DMA_COMPLETE again
+ * Let packet complete handler take care of the packet
+ */
+ status = dmaengine_tx_status(s->chan_rx, s->active_rx, &state);
+ if (status == DMA_COMPLETE) {
+ spin_unlock_irqrestore(&port->lock, flags);
+ dev_dbg(port->dev, "Transaction complete after DMA engine was stopped");
+ return HRTIMER_NORESTART;
+ }
+
+ /* Handle incomplete DMA receive */
+ dmaengine_terminate_async(s->chan_rx);
+ read = sg_dma_len(&s->sg_rx[active]) - state.residue;
+
+ if (read) {
+ count = sci_dma_rx_push(s, s->rx_buf[active], read);
+ if (count)
+ tty_flip_buffer_push(&port->state->port);
+ }
+
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
+ sci_dma_rx_submit(s, true);
+
+ sci_dma_rx_reenable_irq(s);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ return HRTIMER_NORESTART;
+}
+
+static struct dma_chan *sci_request_dma_chan(struct uart_port *port,
+ enum dma_transfer_direction dir)
+{
+ struct dma_chan *chan;
+ struct dma_slave_config cfg;
+ int ret;
+
+ chan = dma_request_slave_channel(port->dev,
+ dir == DMA_MEM_TO_DEV ? "tx" : "rx");
+ if (!chan) {
+ dev_dbg(port->dev, "dma_request_slave_channel failed\n");
+ return NULL;
+ }
+
+ memset(&cfg, 0, sizeof(cfg));
+ cfg.direction = dir;
+ if (dir == DMA_MEM_TO_DEV) {
+ cfg.dst_addr = port->mapbase +
+ (sci_getreg(port, SCxTDR)->offset << port->regshift);
+ cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ } else {
+ cfg.src_addr = port->mapbase +
+ (sci_getreg(port, SCxRDR)->offset << port->regshift);
+ cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ }
+
+ ret = dmaengine_slave_config(chan, &cfg);
+ if (ret) {
+ dev_warn(port->dev, "dmaengine_slave_config failed %d\n", ret);
+ dma_release_channel(chan);
+ return NULL;
+ }
+
+ return chan;
+}
+
+static void sci_request_dma(struct uart_port *port)
+{
+ struct sci_port *s = to_sci_port(port);
+ struct dma_chan *chan;
+
+ dev_dbg(port->dev, "%s: port %d\n", __func__, port->line);
+
+ /*
+ * DMA on console may interfere with Kernel log messages which use
+ * plain putchar(). So, simply don't use it with a console.
+ */
+ if (uart_console(port))
+ return;
+
+ if (!port->dev->of_node)
+ return;
+
+ s->cookie_tx = -EINVAL;
+
+ /*
+ * Don't request a dma channel if no channel was specified
+ * in the device tree.
+ */
+ if (!of_find_property(port->dev->of_node, "dmas", NULL))
+ return;
+
+ chan = sci_request_dma_chan(port, DMA_MEM_TO_DEV);
+ dev_dbg(port->dev, "%s: TX: got channel %p\n", __func__, chan);
+ if (chan) {
+ /* UART circular tx buffer is an aligned page. */
+ s->tx_dma_addr = dma_map_single(chan->device->dev,
+ port->state->xmit.buf,
+ UART_XMIT_SIZE,
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(chan->device->dev, s->tx_dma_addr)) {
+ dev_warn(port->dev, "Failed mapping Tx DMA descriptor\n");
+ dma_release_channel(chan);
+ } else {
+ dev_dbg(port->dev, "%s: mapped %lu@%p to %pad\n",
+ __func__, UART_XMIT_SIZE,
+ port->state->xmit.buf, &s->tx_dma_addr);
+
+ INIT_WORK(&s->work_tx, sci_dma_tx_work_fn);
+ s->chan_tx_saved = s->chan_tx = chan;
+ }
+ }
+
+ chan = sci_request_dma_chan(port, DMA_DEV_TO_MEM);
+ dev_dbg(port->dev, "%s: RX: got channel %p\n", __func__, chan);
+ if (chan) {
+ unsigned int i;
+ dma_addr_t dma;
+ void *buf;
+
+ s->buf_len_rx = 2 * max_t(size_t, 16, port->fifosize);
+ buf = dma_alloc_coherent(chan->device->dev, s->buf_len_rx * 2,
+ &dma, GFP_KERNEL);
+ if (!buf) {
+ dev_warn(port->dev,
+ "Failed to allocate Rx dma buffer, using PIO\n");
+ dma_release_channel(chan);
+ return;
+ }
+
+ for (i = 0; i < 2; i++) {
+ struct scatterlist *sg = &s->sg_rx[i];
+
+ sg_init_table(sg, 1);
+ s->rx_buf[i] = buf;
+ sg_dma_address(sg) = dma;
+ sg_dma_len(sg) = s->buf_len_rx;
+
+ buf += s->buf_len_rx;
+ dma += s->buf_len_rx;
+ }
+
+ hrtimer_init(&s->rx_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+ s->rx_timer.function = sci_dma_rx_timer_fn;
+
+ s->chan_rx_saved = s->chan_rx = chan;
+
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
+ sci_dma_rx_submit(s, false);
+ }
+}
+
+static void sci_free_dma(struct uart_port *port)
+{
+ struct sci_port *s = to_sci_port(port);
+
+ if (s->chan_tx_saved)
+ sci_dma_tx_release(s);
+ if (s->chan_rx_saved)
+ sci_dma_rx_release(s);
+}
+
+static void sci_flush_buffer(struct uart_port *port)
+{
+ struct sci_port *s = to_sci_port(port);
+
+ /*
+ * In uart_flush_buffer(), the xmit circular buffer has just been
+ * cleared, so we have to reset tx_dma_len accordingly, and stop any
+ * pending transfers
+ */
+ s->tx_dma_len = 0;
+ if (s->chan_tx) {
+ dmaengine_terminate_async(s->chan_tx);
+ s->cookie_tx = -EINVAL;
+ }
+}
+#else /* !CONFIG_SERIAL_SH_SCI_DMA */
+static inline void sci_request_dma(struct uart_port *port)
+{
+}
+
+static inline void sci_free_dma(struct uart_port *port)
+{
+}
+
+#define sci_flush_buffer NULL
+#endif /* !CONFIG_SERIAL_SH_SCI_DMA */
+
+static irqreturn_t sci_rx_interrupt(int irq, void *ptr)
+{
+ struct uart_port *port = ptr;
+ struct sci_port *s = to_sci_port(port);
+
+#ifdef CONFIG_SERIAL_SH_SCI_DMA
+ if (s->chan_rx) {
+ u16 scr = serial_port_in(port, SCSCR);
+ u16 ssr = serial_port_in(port, SCxSR);
+
+ /* Disable future Rx interrupts */
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
+ disable_irq_nosync(irq);
+ scr |= SCSCR_RDRQE;
+ } else {
+ if (sci_dma_rx_submit(s, false) < 0)
+ goto handle_pio;
+
+ scr &= ~SCSCR_RIE;
+ }
+ serial_port_out(port, SCSCR, scr);
+ /* Clear current interrupt */
+ serial_port_out(port, SCxSR,
+ ssr & ~(SCIF_DR | SCxSR_RDxF(port)));
+ dev_dbg(port->dev, "Rx IRQ %lu: setup t-out in %u us\n",
+ jiffies, s->rx_timeout);
+ start_hrtimer_us(&s->rx_timer, s->rx_timeout);
+
+ return IRQ_HANDLED;
+ }
+
+handle_pio:
+#endif
+
+ if (s->rx_trigger > 1 && s->rx_fifo_timeout > 0) {
+ if (!scif_rtrg_enabled(port))
+ scif_set_rtrg(port, s->rx_trigger);
+
+ mod_timer(&s->rx_fifo_timer, jiffies + DIV_ROUND_UP(
+ s->rx_frame * HZ * s->rx_fifo_timeout, 1000000));
+ }
+
+ /* I think sci_receive_chars has to be called irrespective
+ * of whether the I_IXOFF is set, otherwise, how is the interrupt
+ * to be disabled?
+ */
+ sci_receive_chars(port);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t sci_tx_interrupt(int irq, void *ptr)
+{
+ struct uart_port *port = ptr;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+ sci_transmit_chars(port);
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t sci_br_interrupt(int irq, void *ptr)
+{
+ struct uart_port *port = ptr;
+
+ /* Handle BREAKs */
+ sci_handle_breaks(port);
+
+ /* drop invalid character received before break was detected */
+ serial_port_in(port, SCxRDR);
+
+ sci_clear_SCxSR(port, SCxSR_BREAK_CLEAR(port));
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t sci_er_interrupt(int irq, void *ptr)
+{
+ struct uart_port *port = ptr;
+ struct sci_port *s = to_sci_port(port);
+
+ if (s->irqs[SCIx_ERI_IRQ] == s->irqs[SCIx_BRI_IRQ]) {
+ /* Break and Error interrupts are muxed */
+ unsigned short ssr_status = serial_port_in(port, SCxSR);
+
+ /* Break Interrupt */
+ if (ssr_status & SCxSR_BRK(port))
+ sci_br_interrupt(irq, ptr);
+
+ /* Break only? */
+ if (!(ssr_status & SCxSR_ERRORS(port)))
+ return IRQ_HANDLED;
+ }
+
+ /* Handle errors */
+ if (port->type == PORT_SCI) {
+ if (sci_handle_errors(port)) {
+ /* discard character in rx buffer */
+ serial_port_in(port, SCxSR);
+ sci_clear_SCxSR(port, SCxSR_RDxF_CLEAR(port));
+ }
+ } else {
+ sci_handle_fifo_overrun(port);
+ if (!s->chan_rx)
+ sci_receive_chars(port);
+ }
+
+ sci_clear_SCxSR(port, SCxSR_ERROR_CLEAR(port));
+
+ /* Kick the transmission */
+ if (!s->chan_tx)
+ sci_tx_interrupt(irq, ptr);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
+{
+ unsigned short ssr_status, scr_status, err_enabled, orer_status = 0;
+ struct uart_port *port = ptr;
+ struct sci_port *s = to_sci_port(port);
+ irqreturn_t ret = IRQ_NONE;
+
+ ssr_status = serial_port_in(port, SCxSR);
+ scr_status = serial_port_in(port, SCSCR);
+ if (s->params->overrun_reg == SCxSR)
+ orer_status = ssr_status;
+ else if (sci_getreg(port, s->params->overrun_reg)->size)
+ orer_status = serial_port_in(port, s->params->overrun_reg);
+
+ err_enabled = scr_status & port_rx_irq_mask(port);
+
+ /* Tx Interrupt */
+ if ((ssr_status & SCxSR_TDxE(port)) && (scr_status & SCSCR_TIE) &&
+ !s->chan_tx)
+ ret = sci_tx_interrupt(irq, ptr);
+
+ /*
+ * Rx Interrupt: if we're using DMA, the DMA controller clears RDF /
+ * DR flags
+ */
+ if (((ssr_status & SCxSR_RDxF(port)) || s->chan_rx) &&
+ (scr_status & SCSCR_RIE))
+ ret = sci_rx_interrupt(irq, ptr);
+
+ /* Error Interrupt */
+ if ((ssr_status & SCxSR_ERRORS(port)) && err_enabled)
+ ret = sci_er_interrupt(irq, ptr);
+
+ /* Break Interrupt */
+ if (s->irqs[SCIx_ERI_IRQ] != s->irqs[SCIx_BRI_IRQ] &&
+ (ssr_status & SCxSR_BRK(port)) && err_enabled)
+ ret = sci_br_interrupt(irq, ptr);
+
+ /* Overrun Interrupt */
+ if (orer_status & s->params->overrun_mask) {
+ sci_handle_fifo_overrun(port);
+ ret = IRQ_HANDLED;
+ }
+
+ return ret;
+}
+
+static const struct sci_irq_desc {
+ const char *desc;
+ irq_handler_t handler;
+} sci_irq_desc[] = {
+ /*
+ * Split out handlers, the default case.
+ */
+ [SCIx_ERI_IRQ] = {
+ .desc = "rx err",
+ .handler = sci_er_interrupt,
+ },
+
+ [SCIx_RXI_IRQ] = {
+ .desc = "rx full",
+ .handler = sci_rx_interrupt,
+ },
+
+ [SCIx_TXI_IRQ] = {
+ .desc = "tx empty",
+ .handler = sci_tx_interrupt,
+ },
+
+ [SCIx_BRI_IRQ] = {
+ .desc = "break",
+ .handler = sci_br_interrupt,
+ },
+
+ [SCIx_DRI_IRQ] = {
+ .desc = "rx ready",
+ .handler = sci_rx_interrupt,
+ },
+
+ [SCIx_TEI_IRQ] = {
+ .desc = "tx end",
+ .handler = sci_tx_interrupt,
+ },
+
+ /*
+ * Special muxed handler.
+ */
+ [SCIx_MUX_IRQ] = {
+ .desc = "mux",
+ .handler = sci_mpxed_interrupt,
+ },
+};
+
+static int sci_request_irq(struct sci_port *port)
+{
+ struct uart_port *up = &port->port;
+ int i, j, w, ret = 0;
+
+ for (i = j = 0; i < SCIx_NR_IRQS; i++, j++) {
+ const struct sci_irq_desc *desc;
+ int irq;
+
+ /* Check if already registered (muxed) */
+ for (w = 0; w < i; w++)
+ if (port->irqs[w] == port->irqs[i])
+ w = i + 1;
+ if (w > i)
+ continue;
+
+ if (SCIx_IRQ_IS_MUXED(port)) {
+ i = SCIx_MUX_IRQ;
+ irq = up->irq;
+ } else {
+ irq = port->irqs[i];
+
+ /*
+ * Certain port types won't support all of the
+ * available interrupt sources.
+ */
+ if (unlikely(irq < 0))
+ continue;
+ }
+
+ desc = sci_irq_desc + i;
+ port->irqstr[j] = kasprintf(GFP_KERNEL, "%s:%s",
+ dev_name(up->dev), desc->desc);
+ if (!port->irqstr[j]) {
+ ret = -ENOMEM;
+ goto out_nomem;
+ }
+
+ ret = request_irq(irq, desc->handler, up->irqflags,
+ port->irqstr[j], port);
+ if (unlikely(ret)) {
+ dev_err(up->dev, "Can't allocate %s IRQ\n", desc->desc);
+ goto out_noirq;
+ }
+ }
+
+ return 0;
+
+out_noirq:
+ while (--i >= 0)
+ free_irq(port->irqs[i], port);
+
+out_nomem:
+ while (--j >= 0)
+ kfree(port->irqstr[j]);
+
+ return ret;
+}
+
+static void sci_free_irq(struct sci_port *port)
+{
+ int i, j;
+
+ /*
+ * Intentionally in reverse order so we iterate over the muxed
+ * IRQ first.
+ */
+ for (i = 0; i < SCIx_NR_IRQS; i++) {
+ int irq = port->irqs[i];
+
+ /*
+ * Certain port types won't support all of the available
+ * interrupt sources.
+ */
+ if (unlikely(irq < 0))
+ continue;
+
+ /* Check if already freed (irq was muxed) */
+ for (j = 0; j < i; j++)
+ if (port->irqs[j] == irq)
+ j = i + 1;
+ if (j > i)
+ continue;
+
+ free_irq(port->irqs[i], port);
+ kfree(port->irqstr[i]);
+
+ if (SCIx_IRQ_IS_MUXED(port)) {
+ /* If there's only one IRQ, we're done. */
+ return;
+ }
+ }
+}
+
+static unsigned int sci_tx_empty(struct uart_port *port)
+{
+ unsigned short status = serial_port_in(port, SCxSR);
+ unsigned short in_tx_fifo = sci_txfill(port);
+
+ return (status & SCxSR_TEND(port)) && !in_tx_fifo ? TIOCSER_TEMT : 0;
+}
+
+static void sci_set_rts(struct uart_port *port, bool state)
+{
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
+ u16 data = serial_port_in(port, SCPDR);
+
+ /* Active low */
+ if (state)
+ data &= ~SCPDR_RTSD;
+ else
+ data |= SCPDR_RTSD;
+ serial_port_out(port, SCPDR, data);
+
+ /* RTS# is output */
+ serial_port_out(port, SCPCR,
+ serial_port_in(port, SCPCR) | SCPCR_RTSC);
+ } else if (sci_getreg(port, SCSPTR)->size) {
+ u16 ctrl = serial_port_in(port, SCSPTR);
+
+ /* Active low */
+ if (state)
+ ctrl &= ~SCSPTR_RTSDT;
+ else
+ ctrl |= SCSPTR_RTSDT;
+ serial_port_out(port, SCSPTR, ctrl);
+ }
+}
+
+static bool sci_get_cts(struct uart_port *port)
+{
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
+ /* Active low */
+ return !(serial_port_in(port, SCPDR) & SCPDR_CTSD);
+ } else if (sci_getreg(port, SCSPTR)->size) {
+ /* Active low */
+ return !(serial_port_in(port, SCSPTR) & SCSPTR_CTSDT);
+ }
+
+ return true;
+}
+
+/*
+ * Modem control is a bit of a mixed bag for SCI(F) ports. Generally
+ * CTS/RTS is supported in hardware by at least one port and controlled
+ * via SCSPTR (SCxPCR for SCIFA/B parts), or external pins (presently
+ * handled via the ->init_pins() op, which is a bit of a one-way street,
+ * lacking any ability to defer pin control -- this will later be
+ * converted over to the GPIO framework).
+ *
+ * Other modes (such as loopback) are supported generically on certain
+ * port types, but not others. For these it's sufficient to test for the
+ * existence of the support register and simply ignore the port type.
+ */
+static void sci_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ struct sci_port *s = to_sci_port(port);
+
+ if (mctrl & TIOCM_LOOP) {
+ const struct plat_sci_reg *reg;
+
+ /*
+ * Standard loopback mode for SCFCR ports.
+ */
+ reg = sci_getreg(port, SCFCR);
+ if (reg->size)
+ serial_port_out(port, SCFCR,
+ serial_port_in(port, SCFCR) |
+ SCFCR_LOOP);
+ }
+
+ mctrl_gpio_set(s->gpios, mctrl);
+
+ if (!s->has_rtscts)
+ return;
+
+ if (!(mctrl & TIOCM_RTS)) {
+ /* Disable Auto RTS */
+ serial_port_out(port, SCFCR,
+ serial_port_in(port, SCFCR) & ~SCFCR_MCE);
+
+ /* Clear RTS */
+ sci_set_rts(port, 0);
+ } else if (s->autorts) {
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
+ /* Enable RTS# pin function */
+ serial_port_out(port, SCPCR,
+ serial_port_in(port, SCPCR) & ~SCPCR_RTSC);
+ }
+
+ /* Enable Auto RTS */
+ serial_port_out(port, SCFCR,
+ serial_port_in(port, SCFCR) | SCFCR_MCE);
+ } else {
+ /* Set RTS */
+ sci_set_rts(port, 1);
+ }
+}
+
+static unsigned int sci_get_mctrl(struct uart_port *port)
+{
+ struct sci_port *s = to_sci_port(port);
+ struct mctrl_gpios *gpios = s->gpios;
+ unsigned int mctrl = 0;
+
+ mctrl_gpio_get(gpios, &mctrl);
+
+ /*
+ * CTS/RTS is handled in hardware when supported, while nothing
+ * else is wired up.
+ */
+ if (s->autorts) {
+ if (sci_get_cts(port))
+ mctrl |= TIOCM_CTS;
+ } else if (!mctrl_gpio_to_gpiod(gpios, UART_GPIO_CTS)) {
+ mctrl |= TIOCM_CTS;
+ }
+ if (!mctrl_gpio_to_gpiod(gpios, UART_GPIO_DSR))
+ mctrl |= TIOCM_DSR;
+ if (!mctrl_gpio_to_gpiod(gpios, UART_GPIO_DCD))
+ mctrl |= TIOCM_CAR;
+
+ return mctrl;
+}
+
+static void sci_enable_ms(struct uart_port *port)
+{
+ mctrl_gpio_enable_ms(to_sci_port(port)->gpios);
+}
+
+static void sci_break_ctl(struct uart_port *port, int break_state)
+{
+ unsigned short scscr, scsptr;
+ unsigned long flags;
+
+ /* check whether the port has SCSPTR */
+ if (!sci_getreg(port, SCSPTR)->size) {
+ /*
+ * Not supported by hardware. Most parts couple break and rx
+ * interrupts together, with break detection always enabled.
+ */
+ return;
+ }
+
+ spin_lock_irqsave(&port->lock, flags);
+ scsptr = serial_port_in(port, SCSPTR);
+ scscr = serial_port_in(port, SCSCR);
+
+ if (break_state == -1) {
+ scsptr = (scsptr | SCSPTR_SPB2IO) & ~SCSPTR_SPB2DT;
+ scscr &= ~SCSCR_TE;
+ } else {
+ scsptr = (scsptr | SCSPTR_SPB2DT) & ~SCSPTR_SPB2IO;
+ scscr |= SCSCR_TE;
+ }
+
+ serial_port_out(port, SCSPTR, scsptr);
+ serial_port_out(port, SCSCR, scscr);
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static int sci_startup(struct uart_port *port)
+{
+ struct sci_port *s = to_sci_port(port);
+ int ret;
+
+ dev_dbg(port->dev, "%s(%d)\n", __func__, port->line);
+
+ sci_request_dma(port);
+
+ ret = sci_request_irq(s);
+ if (unlikely(ret < 0)) {
+ sci_free_dma(port);
+ return ret;
+ }
+
+ return 0;
+}
+
+static void sci_shutdown(struct uart_port *port)
+{
+ struct sci_port *s = to_sci_port(port);
+ unsigned long flags;
+ u16 scr;
+
+ dev_dbg(port->dev, "%s(%d)\n", __func__, port->line);
+
+ s->autorts = false;
+ mctrl_gpio_disable_ms(to_sci_port(port)->gpios);
+
+ spin_lock_irqsave(&port->lock, flags);
+ sci_stop_rx(port);
+ sci_stop_tx(port);
+ /*
+ * Stop RX and TX, disable related interrupts, keep clock source
+ * and HSCIF TOT bits
+ */
+ scr = serial_port_in(port, SCSCR);
+ serial_port_out(port, SCSCR, scr &
+ (SCSCR_CKE1 | SCSCR_CKE0 | s->hscif_tot));
+ spin_unlock_irqrestore(&port->lock, flags);
+
+#ifdef CONFIG_SERIAL_SH_SCI_DMA
+ if (s->chan_rx_saved) {
+ dev_dbg(port->dev, "%s(%d) deleting rx_timer\n", __func__,
+ port->line);
+ hrtimer_cancel(&s->rx_timer);
+ }
+#endif
+
+ if (s->rx_trigger > 1 && s->rx_fifo_timeout > 0)
+ del_timer_sync(&s->rx_fifo_timer);
+ sci_free_irq(s);
+ sci_free_dma(port);
+}
+
+static int sci_sck_calc(struct sci_port *s, unsigned int bps,
+ unsigned int *srr)
+{
+ unsigned long freq = s->clk_rates[SCI_SCK];
+ int err, min_err = INT_MAX;
+ unsigned int sr;
+
+ if (s->port.type != PORT_HSCIF)
+ freq *= 2;
+
+ for_each_sr(sr, s) {
+ err = DIV_ROUND_CLOSEST(freq, sr) - bps;
+ if (abs(err) >= abs(min_err))
+ continue;
+
+ min_err = err;
+ *srr = sr - 1;
+
+ if (!err)
+ break;
+ }
+
+ dev_dbg(s->port.dev, "SCK: %u%+d bps using SR %u\n", bps, min_err,
+ *srr + 1);
+ return min_err;
+}
+
+static int sci_brg_calc(struct sci_port *s, unsigned int bps,
+ unsigned long freq, unsigned int *dlr,
+ unsigned int *srr)
+{
+ int err, min_err = INT_MAX;
+ unsigned int sr, dl;
+
+ if (s->port.type != PORT_HSCIF)
+ freq *= 2;
+
+ for_each_sr(sr, s) {
+ dl = DIV_ROUND_CLOSEST(freq, sr * bps);
+ dl = clamp(dl, 1U, 65535U);
+
+ err = DIV_ROUND_CLOSEST(freq, sr * dl) - bps;
+ if (abs(err) >= abs(min_err))
+ continue;
+
+ min_err = err;
+ *dlr = dl;
+ *srr = sr - 1;
+
+ if (!err)
+ break;
+ }
+
+ dev_dbg(s->port.dev, "BRG: %u%+d bps using DL %u SR %u\n", bps,
+ min_err, *dlr, *srr + 1);
+ return min_err;
+}
+
+/* calculate sample rate, BRR, and clock select */
+static int sci_scbrr_calc(struct sci_port *s, unsigned int bps,
+ unsigned int *brr, unsigned int *srr,
+ unsigned int *cks)
+{
+ unsigned long freq = s->clk_rates[SCI_FCK];
+ unsigned int sr, br, prediv, scrate, c;
+ int err, min_err = INT_MAX;
+
+ if (s->port.type != PORT_HSCIF)
+ freq *= 2;
+
+ /*
+ * Find the combination of sample rate and clock select with the
+ * smallest deviation from the desired baud rate.
+ * Prefer high sample rates to maximise the receive margin.
+ *
+ * M: Receive margin (%)
+ * N: Ratio of bit rate to clock (N = sampling rate)
+ * D: Clock duty (D = 0 to 1.0)
+ * L: Frame length (L = 9 to 12)
+ * F: Absolute value of clock frequency deviation
+ *
+ * M = |(0.5 - 1 / 2 * N) - ((L - 0.5) * F) -
+ * (|D - 0.5| / N * (1 + F))|
+ * NOTE: Usually, treat D for 0.5, F is 0 by this calculation.
+ */
+ for_each_sr(sr, s) {
+ for (c = 0; c <= 3; c++) {
+ /* integerized formulas from HSCIF documentation */
+ prediv = sr << (2 * c + 1);
+
+ /*
+ * We need to calculate:
+ *
+ * br = freq / (prediv * bps) clamped to [1..256]
+ * err = freq / (br * prediv) - bps
+ *
+ * Watch out for overflow when calculating the desired
+ * sampling clock rate!
+ */
+ if (bps > UINT_MAX / prediv)
+ break;
+
+ scrate = prediv * bps;
+ br = DIV_ROUND_CLOSEST(freq, scrate);
+ br = clamp(br, 1U, 256U);
+
+ err = DIV_ROUND_CLOSEST(freq, br * prediv) - bps;
+ if (abs(err) >= abs(min_err))
+ continue;
+
+ min_err = err;
+ *brr = br - 1;
+ *srr = sr - 1;
+ *cks = c;
+
+ if (!err)
+ goto found;
+ }
+ }
+
+found:
+ dev_dbg(s->port.dev, "BRR: %u%+d bps using N %u SR %u cks %u\n", bps,
+ min_err, *brr, *srr + 1, *cks);
+ return min_err;
+}
+
+static void sci_reset(struct uart_port *port)
+{
+ const struct plat_sci_reg *reg;
+ unsigned int status;
+ struct sci_port *s = to_sci_port(port);
+
+ serial_port_out(port, SCSCR, s->hscif_tot); /* TE=0, RE=0, CKE1=0 */
+
+ reg = sci_getreg(port, SCFCR);
+ if (reg->size)
+ serial_port_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST);
+
+ sci_clear_SCxSR(port,
+ SCxSR_RDxF_CLEAR(port) & SCxSR_ERROR_CLEAR(port) &
+ SCxSR_BREAK_CLEAR(port));
+ if (sci_getreg(port, SCLSR)->size) {
+ status = serial_port_in(port, SCLSR);
+ status &= ~(SCLSR_TO | SCLSR_ORER);
+ serial_port_out(port, SCLSR, status);
+ }
+
+ if (s->rx_trigger > 1) {
+ if (s->rx_fifo_timeout) {
+ scif_set_rtrg(port, 1);
+ timer_setup(&s->rx_fifo_timer, rx_fifo_timer_fn, 0);
+ } else {
+ if (port->type == PORT_SCIFA ||
+ port->type == PORT_SCIFB)
+ scif_set_rtrg(port, 1);
+ else
+ scif_set_rtrg(port, s->rx_trigger);
+ }
+ }
+}
+
+static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
+ const struct ktermios *old)
+{
+ unsigned int baud, smr_val = SCSMR_ASYNC, scr_val = 0, i, bits;
+ unsigned int brr = 255, cks = 0, srr = 15, dl = 0, sccks = 0;
+ unsigned int brr1 = 255, cks1 = 0, srr1 = 15, dl1 = 0;
+ struct sci_port *s = to_sci_port(port);
+ const struct plat_sci_reg *reg;
+ int min_err = INT_MAX, err;
+ unsigned long max_freq = 0;
+ int best_clk = -1;
+ unsigned long flags;
+
+ if ((termios->c_cflag & CSIZE) == CS7) {
+ smr_val |= SCSMR_CHR;
+ } else {
+ termios->c_cflag &= ~CSIZE;
+ termios->c_cflag |= CS8;
+ }
+ if (termios->c_cflag & PARENB)
+ smr_val |= SCSMR_PE;
+ if (termios->c_cflag & PARODD)
+ smr_val |= SCSMR_PE | SCSMR_ODD;
+ if (termios->c_cflag & CSTOPB)
+ smr_val |= SCSMR_STOP;
+
+ /*
+ * earlyprintk comes here early on with port->uartclk set to zero.
+ * the clock framework is not up and running at this point so here
+ * we assume that 115200 is the maximum baud rate. please note that
+ * the baud rate is not programmed during earlyprintk - it is assumed
+ * that the previous boot loader has enabled required clocks and
+ * setup the baud rate generator hardware for us already.
+ */
+ if (!port->uartclk) {
+ baud = uart_get_baud_rate(port, termios, old, 0, 115200);
+ goto done;
+ }
+
+ for (i = 0; i < SCI_NUM_CLKS; i++)
+ max_freq = max(max_freq, s->clk_rates[i]);
+
+ baud = uart_get_baud_rate(port, termios, old, 0, max_freq / min_sr(s));
+ if (!baud)
+ goto done;
+
+ /*
+ * There can be multiple sources for the sampling clock. Find the one
+ * that gives us the smallest deviation from the desired baud rate.
+ */
+
+ /* Optional Undivided External Clock */
+ if (s->clk_rates[SCI_SCK] && port->type != PORT_SCIFA &&
+ port->type != PORT_SCIFB) {
+ err = sci_sck_calc(s, baud, &srr1);
+ if (abs(err) < abs(min_err)) {
+ best_clk = SCI_SCK;
+ scr_val = SCSCR_CKE1;
+ sccks = SCCKS_CKS;
+ min_err = err;
+ srr = srr1;
+ if (!err)
+ goto done;
+ }
+ }
+
+ /* Optional BRG Frequency Divided External Clock */
+ if (s->clk_rates[SCI_SCIF_CLK] && sci_getreg(port, SCDL)->size) {
+ err = sci_brg_calc(s, baud, s->clk_rates[SCI_SCIF_CLK], &dl1,
+ &srr1);
+ if (abs(err) < abs(min_err)) {
+ best_clk = SCI_SCIF_CLK;
+ scr_val = SCSCR_CKE1;
+ sccks = 0;
+ min_err = err;
+ dl = dl1;
+ srr = srr1;
+ if (!err)
+ goto done;
+ }
+ }
+
+ /* Optional BRG Frequency Divided Internal Clock */
+ if (s->clk_rates[SCI_BRG_INT] && sci_getreg(port, SCDL)->size) {
+ err = sci_brg_calc(s, baud, s->clk_rates[SCI_BRG_INT], &dl1,
+ &srr1);
+ if (abs(err) < abs(min_err)) {
+ best_clk = SCI_BRG_INT;
+ scr_val = SCSCR_CKE1;
+ sccks = SCCKS_XIN;
+ min_err = err;
+ dl = dl1;
+ srr = srr1;
+ if (!min_err)
+ goto done;
+ }
+ }
+
+ /* Divided Functional Clock using standard Bit Rate Register */
+ err = sci_scbrr_calc(s, baud, &brr1, &srr1, &cks1);
+ if (abs(err) < abs(min_err)) {
+ best_clk = SCI_FCK;
+ scr_val = 0;
+ min_err = err;
+ brr = brr1;
+ srr = srr1;
+ cks = cks1;
+ }
+
+done:
+ if (best_clk >= 0)
+ dev_dbg(port->dev, "Using clk %pC for %u%+d bps\n",
+ s->clks[best_clk], baud, min_err);
+
+ sci_port_enable(s);
+
+ /*
+ * Program the optional External Baud Rate Generator (BRG) first.
+ * It controls the mux to select (H)SCK or frequency divided clock.
+ */
+ if (best_clk >= 0 && sci_getreg(port, SCCKS)->size) {
+ serial_port_out(port, SCDL, dl);
+ serial_port_out(port, SCCKS, sccks);
+ }
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ sci_reset(port);
+
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ /* byte size and parity */
+ bits = tty_get_frame_size(termios->c_cflag);
+
+ if (sci_getreg(port, SEMR)->size)
+ serial_port_out(port, SEMR, 0);
+
+ if (best_clk >= 0) {
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
+ switch (srr + 1) {
+ case 5: smr_val |= SCSMR_SRC_5; break;
+ case 7: smr_val |= SCSMR_SRC_7; break;
+ case 11: smr_val |= SCSMR_SRC_11; break;
+ case 13: smr_val |= SCSMR_SRC_13; break;
+ case 16: smr_val |= SCSMR_SRC_16; break;
+ case 17: smr_val |= SCSMR_SRC_17; break;
+ case 19: smr_val |= SCSMR_SRC_19; break;
+ case 27: smr_val |= SCSMR_SRC_27; break;
+ }
+ smr_val |= cks;
+ serial_port_out(port, SCSCR, scr_val | s->hscif_tot);
+ serial_port_out(port, SCSMR, smr_val);
+ serial_port_out(port, SCBRR, brr);
+ if (sci_getreg(port, HSSRR)->size) {
+ unsigned int hssrr = srr | HSCIF_SRE;
+ /* Calculate deviation from intended rate at the
+ * center of the last stop bit in sampling clocks.
+ */
+ int last_stop = bits * 2 - 1;
+ int deviation = DIV_ROUND_CLOSEST(min_err * last_stop *
+ (int)(srr + 1),
+ 2 * (int)baud);
+
+ if (abs(deviation) >= 2) {
+ /* At least two sampling clocks off at the
+ * last stop bit; we can increase the error
+ * margin by shifting the sampling point.
+ */
+ int shift = clamp(deviation / 2, -8, 7);
+
+ hssrr |= (shift << HSCIF_SRHP_SHIFT) &
+ HSCIF_SRHP_MASK;
+ hssrr |= HSCIF_SRDE;
+ }
+ serial_port_out(port, HSSRR, hssrr);
+ }
+
+ /* Wait one bit interval */
+ udelay((1000000 + (baud - 1)) / baud);
+ } else {
+ /* Don't touch the bit rate configuration */
+ scr_val = s->cfg->scscr & (SCSCR_CKE1 | SCSCR_CKE0);
+ smr_val |= serial_port_in(port, SCSMR) &
+ (SCSMR_CKEDG | SCSMR_SRC_MASK | SCSMR_CKS);
+ serial_port_out(port, SCSCR, scr_val | s->hscif_tot);
+ serial_port_out(port, SCSMR, smr_val);
+ }
+
+ sci_init_pins(port, termios->c_cflag);
+
+ port->status &= ~UPSTAT_AUTOCTS;
+ s->autorts = false;
+ reg = sci_getreg(port, SCFCR);
+ if (reg->size) {
+ unsigned short ctrl = serial_port_in(port, SCFCR);
+
+ if ((port->flags & UPF_HARD_FLOW) &&
+ (termios->c_cflag & CRTSCTS)) {
+ /* There is no CTS interrupt to restart the hardware */
+ port->status |= UPSTAT_AUTOCTS;
+ /* MCE is enabled when RTS is raised */
+ s->autorts = true;
+ }
+
+ /*
+ * As we've done a sci_reset() above, ensure we don't
+ * interfere with the FIFOs while toggling MCE. As the
+ * reset values could still be set, simply mask them out.
+ */
+ ctrl &= ~(SCFCR_RFRST | SCFCR_TFRST);
+
+ serial_port_out(port, SCFCR, ctrl);
+ }
+ if (port->flags & UPF_HARD_FLOW) {
+ /* Refresh (Auto) RTS */
+ sci_set_mctrl(port, port->mctrl);
+ }
+
+ scr_val |= SCSCR_RE | SCSCR_TE |
+ (s->cfg->scscr & ~(SCSCR_CKE1 | SCSCR_CKE0));
+ serial_port_out(port, SCSCR, scr_val | s->hscif_tot);
+ if ((srr + 1 == 5) &&
+ (port->type == PORT_SCIFA || port->type == PORT_SCIFB)) {
+ /*
+ * In asynchronous mode, when the sampling rate is 1/5, first
+ * received data may become invalid on some SCIFA and SCIFB.
+ * To avoid this problem wait more than 1 serial data time (1
+ * bit time x serial data number) after setting SCSCR.RE = 1.
+ */
+ udelay(DIV_ROUND_UP(10 * 1000000, baud));
+ }
+
+ /* Calculate delay for 2 DMA buffers (4 FIFO). */
+ s->rx_frame = (10000 * bits) / (baud / 100);
+#ifdef CONFIG_SERIAL_SH_SCI_DMA
+ s->rx_timeout = s->buf_len_rx * 2 * s->rx_frame;
+#endif
+
+ if ((termios->c_cflag & CREAD) != 0)
+ sci_start_rx(port);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ sci_port_disable(s);
+
+ if (UART_ENABLE_MS(port, termios->c_cflag))
+ sci_enable_ms(port);
+}
+
+static void sci_pm(struct uart_port *port, unsigned int state,
+ unsigned int oldstate)
+{
+ struct sci_port *sci_port = to_sci_port(port);
+
+ switch (state) {
+ case UART_PM_STATE_OFF:
+ sci_port_disable(sci_port);
+ break;
+ default:
+ sci_port_enable(sci_port);
+ break;
+ }
+}
+
+static const char *sci_type(struct uart_port *port)
+{
+ switch (port->type) {
+ case PORT_IRDA:
+ return "irda";
+ case PORT_SCI:
+ return "sci";
+ case PORT_SCIF:
+ return "scif";
+ case PORT_SCIFA:
+ return "scifa";
+ case PORT_SCIFB:
+ return "scifb";
+ case PORT_HSCIF:
+ return "hscif";
+ }
+
+ return NULL;
+}
+
+static int sci_remap_port(struct uart_port *port)
+{
+ struct sci_port *sport = to_sci_port(port);
+
+ /*
+ * Nothing to do if there's already an established membase.
+ */
+ if (port->membase)
+ return 0;
+
+ if (port->dev->of_node || (port->flags & UPF_IOREMAP)) {
+ port->membase = ioremap(port->mapbase, sport->reg_size);
+ if (unlikely(!port->membase)) {
+ dev_err(port->dev, "can't remap port#%d\n", port->line);
+ return -ENXIO;
+ }
+ } else {
+ /*
+ * For the simple (and majority of) cases where we don't
+ * need to do any remapping, just cast the cookie
+ * directly.
+ */
+ port->membase = (void __iomem *)(uintptr_t)port->mapbase;
+ }
+
+ return 0;
+}
+
+static void sci_release_port(struct uart_port *port)
+{
+ struct sci_port *sport = to_sci_port(port);
+
+ if (port->dev->of_node || (port->flags & UPF_IOREMAP)) {
+ iounmap(port->membase);
+ port->membase = NULL;
+ }
+
+ release_mem_region(port->mapbase, sport->reg_size);
+}
+
+static int sci_request_port(struct uart_port *port)
+{
+ struct resource *res;
+ struct sci_port *sport = to_sci_port(port);
+ int ret;
+
+ res = request_mem_region(port->mapbase, sport->reg_size,
+ dev_name(port->dev));
+ if (unlikely(res == NULL)) {
+ dev_err(port->dev, "request_mem_region failed.");
+ return -EBUSY;
+ }
+
+ ret = sci_remap_port(port);
+ if (unlikely(ret != 0)) {
+ release_resource(res);
+ return ret;
+ }
+
+ return 0;
+}
+
+static void sci_config_port(struct uart_port *port, int flags)
+{
+ if (flags & UART_CONFIG_TYPE) {
+ struct sci_port *sport = to_sci_port(port);
+
+ port->type = sport->cfg->type;
+ sci_request_port(port);
+ }
+}
+
+static int sci_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ if (ser->baud_base < 2400)
+ /* No paper tape reader for Mitch.. */
+ return -EINVAL;
+
+ return 0;
+}
+
+static const struct uart_ops sci_uart_ops = {
+ .tx_empty = sci_tx_empty,
+ .set_mctrl = sci_set_mctrl,
+ .get_mctrl = sci_get_mctrl,
+ .start_tx = sci_start_tx,
+ .stop_tx = sci_stop_tx,
+ .stop_rx = sci_stop_rx,
+ .enable_ms = sci_enable_ms,
+ .break_ctl = sci_break_ctl,
+ .startup = sci_startup,
+ .shutdown = sci_shutdown,
+ .flush_buffer = sci_flush_buffer,
+ .set_termios = sci_set_termios,
+ .pm = sci_pm,
+ .type = sci_type,
+ .release_port = sci_release_port,
+ .request_port = sci_request_port,
+ .config_port = sci_config_port,
+ .verify_port = sci_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+ .poll_get_char = sci_poll_get_char,
+ .poll_put_char = sci_poll_put_char,
+#endif
+};
+
+static int sci_init_clocks(struct sci_port *sci_port, struct device *dev)
+{
+ const char *clk_names[] = {
+ [SCI_FCK] = "fck",
+ [SCI_SCK] = "sck",
+ [SCI_BRG_INT] = "brg_int",
+ [SCI_SCIF_CLK] = "scif_clk",
+ };
+ struct clk *clk;
+ unsigned int i;
+
+ if (sci_port->cfg->type == PORT_HSCIF)
+ clk_names[SCI_SCK] = "hsck";
+
+ for (i = 0; i < SCI_NUM_CLKS; i++) {
+ clk = devm_clk_get_optional(dev, clk_names[i]);
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+
+ if (!clk && i == SCI_FCK) {
+ /*
+ * Not all SH platforms declare a clock lookup entry
+ * for SCI devices, in which case we need to get the
+ * global "peripheral_clk" clock.
+ */
+ clk = devm_clk_get(dev, "peripheral_clk");
+ if (IS_ERR(clk))
+ return dev_err_probe(dev, PTR_ERR(clk),
+ "failed to get %s\n",
+ clk_names[i]);
+ }
+
+ if (!clk)
+ dev_dbg(dev, "failed to get %s\n", clk_names[i]);
+ else
+ dev_dbg(dev, "clk %s is %pC rate %lu\n", clk_names[i],
+ clk, clk_get_rate(clk));
+ sci_port->clks[i] = clk;
+ }
+ return 0;
+}
+
+static const struct sci_port_params *
+sci_probe_regmap(const struct plat_sci_port *cfg)
+{
+ unsigned int regtype;
+
+ if (cfg->regtype != SCIx_PROBE_REGTYPE)
+ return &sci_port_params[cfg->regtype];
+
+ switch (cfg->type) {
+ case PORT_SCI:
+ regtype = SCIx_SCI_REGTYPE;
+ break;
+ case PORT_IRDA:
+ regtype = SCIx_IRDA_REGTYPE;
+ break;
+ case PORT_SCIFA:
+ regtype = SCIx_SCIFA_REGTYPE;
+ break;
+ case PORT_SCIFB:
+ regtype = SCIx_SCIFB_REGTYPE;
+ break;
+ case PORT_SCIF:
+ /*
+ * The SH-4 is a bit of a misnomer here, although that's
+ * where this particular port layout originated. This
+ * configuration (or some slight variation thereof)
+ * remains the dominant model for all SCIFs.
+ */
+ regtype = SCIx_SH4_SCIF_REGTYPE;
+ break;
+ case PORT_HSCIF:
+ regtype = SCIx_HSCIF_REGTYPE;
+ break;
+ default:
+ pr_err("Can't probe register map for given port\n");
+ return NULL;
+ }
+
+ return &sci_port_params[regtype];
+}
+
+static int sci_init_single(struct platform_device *dev,
+ struct sci_port *sci_port, unsigned int index,
+ const struct plat_sci_port *p, bool early)
+{
+ struct uart_port *port = &sci_port->port;
+ const struct resource *res;
+ unsigned int i;
+ int ret;
+
+ sci_port->cfg = p;
+
+ port->ops = &sci_uart_ops;
+ port->iotype = UPIO_MEM;
+ port->line = index;
+ port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_SH_SCI_CONSOLE);
+
+ res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+ if (res == NULL)
+ return -ENOMEM;
+
+ port->mapbase = res->start;
+ sci_port->reg_size = resource_size(res);
+
+ for (i = 0; i < ARRAY_SIZE(sci_port->irqs); ++i) {
+ if (i)
+ sci_port->irqs[i] = platform_get_irq_optional(dev, i);
+ else
+ sci_port->irqs[i] = platform_get_irq(dev, i);
+ }
+
+ /*
+ * The fourth interrupt on SCI port is transmit end interrupt, so
+ * shuffle the interrupts.
+ */
+ if (p->type == PORT_SCI)
+ swap(sci_port->irqs[SCIx_BRI_IRQ], sci_port->irqs[SCIx_TEI_IRQ]);
+
+ /* The SCI generates several interrupts. They can be muxed together or
+ * connected to different interrupt lines. In the muxed case only one
+ * interrupt resource is specified as there is only one interrupt ID.
+ * In the non-muxed case, up to 6 interrupt signals might be generated
+ * from the SCI, however those signals might have their own individual
+ * interrupt ID numbers, or muxed together with another interrupt.
+ */
+ if (sci_port->irqs[0] < 0)
+ return -ENXIO;
+
+ if (sci_port->irqs[1] < 0)
+ for (i = 1; i < ARRAY_SIZE(sci_port->irqs); i++)
+ sci_port->irqs[i] = sci_port->irqs[0];
+
+ sci_port->params = sci_probe_regmap(p);
+ if (unlikely(sci_port->params == NULL))
+ return -EINVAL;
+
+ switch (p->type) {
+ case PORT_SCIFB:
+ sci_port->rx_trigger = 48;
+ break;
+ case PORT_HSCIF:
+ sci_port->rx_trigger = 64;
+ break;
+ case PORT_SCIFA:
+ sci_port->rx_trigger = 32;
+ break;
+ case PORT_SCIF:
+ if (p->regtype == SCIx_SH7705_SCIF_REGTYPE)
+ /* RX triggering not implemented for this IP */
+ sci_port->rx_trigger = 1;
+ else
+ sci_port->rx_trigger = 8;
+ break;
+ default:
+ sci_port->rx_trigger = 1;
+ break;
+ }
+
+ sci_port->rx_fifo_timeout = 0;
+ sci_port->hscif_tot = 0;
+
+ /* SCIFA on sh7723 and sh7724 need a custom sampling rate that doesn't
+ * match the SoC datasheet, this should be investigated. Let platform
+ * data override the sampling rate for now.
+ */
+ sci_port->sampling_rate_mask = p->sampling_rate
+ ? SCI_SR(p->sampling_rate)
+ : sci_port->params->sampling_rate_mask;
+
+ if (!early) {
+ ret = sci_init_clocks(sci_port, &dev->dev);
+ if (ret < 0)
+ return ret;
+
+ port->dev = &dev->dev;
+
+ pm_runtime_enable(&dev->dev);
+ }
+
+ port->type = p->type;
+ port->flags = UPF_FIXED_PORT | UPF_BOOT_AUTOCONF | p->flags;
+ port->fifosize = sci_port->params->fifosize;
+
+ if (port->type == PORT_SCI && !dev->dev.of_node) {
+ if (sci_port->reg_size >= 0x20)
+ port->regshift = 2;
+ else
+ port->regshift = 1;
+ }
+
+ /*
+ * The UART port needs an IRQ value, so we peg this to the RX IRQ
+ * for the multi-IRQ ports, which is where we are primarily
+ * concerned with the shutdown path synchronization.
+ *
+ * For the muxed case there's nothing more to do.
+ */
+ port->irq = sci_port->irqs[SCIx_RXI_IRQ];
+ port->irqflags = 0;
+
+ port->serial_in = sci_serial_in;
+ port->serial_out = sci_serial_out;
+
+ return 0;
+}
+
+static void sci_cleanup_single(struct sci_port *port)
+{
+ pm_runtime_disable(port->port.dev);
+}
+
+#if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) || \
+ defined(CONFIG_SERIAL_SH_SCI_EARLYCON)
+static void serial_console_putchar(struct uart_port *port, unsigned char ch)
+{
+ sci_poll_put_char(port, ch);
+}
+
+/*
+ * Print a string to the serial port trying not to disturb
+ * any possible real use of the port...
+ */
+static void serial_console_write(struct console *co, const char *s,
+ unsigned count)
+{
+ struct sci_port *sci_port = &sci_ports[co->index];
+ struct uart_port *port = &sci_port->port;
+ unsigned short bits, ctrl, ctrl_temp;
+ unsigned long flags;
+ int locked = 1;
+
+ if (port->sysrq)
+ locked = 0;
+ else if (oops_in_progress)
+ locked = spin_trylock_irqsave(&port->lock, flags);
+ else
+ spin_lock_irqsave(&port->lock, flags);
+
+ /* first save SCSCR then disable interrupts, keep clock source */
+ ctrl = serial_port_in(port, SCSCR);
+ ctrl_temp = SCSCR_RE | SCSCR_TE |
+ (sci_port->cfg->scscr & ~(SCSCR_CKE1 | SCSCR_CKE0)) |
+ (ctrl & (SCSCR_CKE1 | SCSCR_CKE0));
+ serial_port_out(port, SCSCR, ctrl_temp | sci_port->hscif_tot);
+
+ uart_console_write(port, s, count, serial_console_putchar);
+
+ /* wait until fifo is empty and last bit has been transmitted */
+ bits = SCxSR_TDxE(port) | SCxSR_TEND(port);
+ while ((serial_port_in(port, SCxSR) & bits) != bits)
+ cpu_relax();
+
+ /* restore the SCSCR */
+ serial_port_out(port, SCSCR, ctrl);
+
+ if (locked)
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static int serial_console_setup(struct console *co, char *options)
+{
+ struct sci_port *sci_port;
+ struct uart_port *port;
+ int baud = 115200;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+ int ret;
+
+ /*
+ * Refuse to handle any bogus ports.
+ */
+ if (co->index < 0 || co->index >= SCI_NPORTS)
+ return -ENODEV;
+
+ sci_port = &sci_ports[co->index];
+ port = &sci_port->port;
+
+ /*
+ * Refuse to handle uninitialized ports.
+ */
+ if (!port->ops)
+ return -ENODEV;
+
+ ret = sci_remap_port(port);
+ if (unlikely(ret != 0))
+ return ret;
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+ return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static struct console serial_console = {
+ .name = "ttySC",
+ .device = uart_console_device,
+ .write = serial_console_write,
+ .setup = serial_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &sci_uart_driver,
+};
+
+#ifdef CONFIG_SUPERH
+static struct console early_serial_console = {
+ .name = "early_ttySC",
+ .write = serial_console_write,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+};
+
+static char early_serial_buf[32];
+
+static int sci_probe_earlyprintk(struct platform_device *pdev)
+{
+ const struct plat_sci_port *cfg = dev_get_platdata(&pdev->dev);
+
+ if (early_serial_console.data)
+ return -EEXIST;
+
+ early_serial_console.index = pdev->id;
+
+ sci_init_single(pdev, &sci_ports[pdev->id], pdev->id, cfg, true);
+
+ serial_console_setup(&early_serial_console, early_serial_buf);
+
+ if (!strstr(early_serial_buf, "keep"))
+ early_serial_console.flags |= CON_BOOT;
+
+ register_console(&early_serial_console);
+ return 0;
+}
+#endif
+
+#define SCI_CONSOLE (&serial_console)
+
+#else
+static inline int sci_probe_earlyprintk(struct platform_device *pdev)
+{
+ return -EINVAL;
+}
+
+#define SCI_CONSOLE NULL
+
+#endif /* CONFIG_SERIAL_SH_SCI_CONSOLE || CONFIG_SERIAL_SH_SCI_EARLYCON */
+
+static const char banner[] __initconst = "SuperH (H)SCI(F) driver initialized";
+
+static DEFINE_MUTEX(sci_uart_registration_lock);
+static struct uart_driver sci_uart_driver = {
+ .owner = THIS_MODULE,
+ .driver_name = "sci",
+ .dev_name = "ttySC",
+ .major = SCI_MAJOR,
+ .minor = SCI_MINOR_START,
+ .nr = SCI_NPORTS,
+ .cons = SCI_CONSOLE,
+};
+
+static int sci_remove(struct platform_device *dev)
+{
+ struct sci_port *port = platform_get_drvdata(dev);
+ unsigned int type = port->port.type; /* uart_remove_... clears it */
+
+ sci_ports_in_use &= ~BIT(port->port.line);
+ uart_remove_one_port(&sci_uart_driver, &port->port);
+
+ sci_cleanup_single(port);
+
+ if (port->port.fifosize > 1)
+ device_remove_file(&dev->dev, &dev_attr_rx_fifo_trigger);
+ if (type == PORT_SCIFA || type == PORT_SCIFB || type == PORT_HSCIF)
+ device_remove_file(&dev->dev, &dev_attr_rx_fifo_timeout);
+
+ return 0;
+}
+
+
+#define SCI_OF_DATA(type, regtype) (void *)((type) << 16 | (regtype))
+#define SCI_OF_TYPE(data) ((unsigned long)(data) >> 16)
+#define SCI_OF_REGTYPE(data) ((unsigned long)(data) & 0xffff)
+
+static const struct of_device_id of_sci_match[] = {
+ /* SoC-specific types */
+ {
+ .compatible = "renesas,scif-r7s72100",
+ .data = SCI_OF_DATA(PORT_SCIF, SCIx_SH2_SCIF_FIFODATA_REGTYPE),
+ },
+ {
+ .compatible = "renesas,scif-r7s9210",
+ .data = SCI_OF_DATA(PORT_SCIF, SCIx_RZ_SCIFA_REGTYPE),
+ },
+ {
+ .compatible = "renesas,scif-r9a07g044",
+ .data = SCI_OF_DATA(PORT_SCIF, SCIx_RZ_SCIFA_REGTYPE),
+ },
+ /* Family-specific types */
+ {
+ .compatible = "renesas,rcar-gen1-scif",
+ .data = SCI_OF_DATA(PORT_SCIF, SCIx_SH4_SCIF_BRG_REGTYPE),
+ }, {
+ .compatible = "renesas,rcar-gen2-scif",
+ .data = SCI_OF_DATA(PORT_SCIF, SCIx_SH4_SCIF_BRG_REGTYPE),
+ }, {
+ .compatible = "renesas,rcar-gen3-scif",
+ .data = SCI_OF_DATA(PORT_SCIF, SCIx_SH4_SCIF_BRG_REGTYPE),
+ }, {
+ .compatible = "renesas,rcar-gen4-scif",
+ .data = SCI_OF_DATA(PORT_SCIF, SCIx_SH4_SCIF_BRG_REGTYPE),
+ },
+ /* Generic types */
+ {
+ .compatible = "renesas,scif",
+ .data = SCI_OF_DATA(PORT_SCIF, SCIx_SH4_SCIF_REGTYPE),
+ }, {
+ .compatible = "renesas,scifa",
+ .data = SCI_OF_DATA(PORT_SCIFA, SCIx_SCIFA_REGTYPE),
+ }, {
+ .compatible = "renesas,scifb",
+ .data = SCI_OF_DATA(PORT_SCIFB, SCIx_SCIFB_REGTYPE),
+ }, {
+ .compatible = "renesas,hscif",
+ .data = SCI_OF_DATA(PORT_HSCIF, SCIx_HSCIF_REGTYPE),
+ }, {
+ .compatible = "renesas,sci",
+ .data = SCI_OF_DATA(PORT_SCI, SCIx_SCI_REGTYPE),
+ }, {
+ /* Terminator */
+ },
+};
+MODULE_DEVICE_TABLE(of, of_sci_match);
+
+static void sci_reset_control_assert(void *data)
+{
+ reset_control_assert(data);
+}
+
+static struct plat_sci_port *sci_parse_dt(struct platform_device *pdev,
+ unsigned int *dev_id)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct reset_control *rstc;
+ struct plat_sci_port *p;
+ struct sci_port *sp;
+ const void *data;
+ int id, ret;
+
+ if (!IS_ENABLED(CONFIG_OF) || !np)
+ return ERR_PTR(-EINVAL);
+
+ data = of_device_get_match_data(&pdev->dev);
+
+ rstc = devm_reset_control_get_optional_exclusive(&pdev->dev, NULL);
+ if (IS_ERR(rstc))
+ return ERR_PTR(dev_err_probe(&pdev->dev, PTR_ERR(rstc),
+ "failed to get reset ctrl\n"));
+
+ ret = reset_control_deassert(rstc);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to deassert reset %d\n", ret);
+ return ERR_PTR(ret);
+ }
+
+ ret = devm_add_action_or_reset(&pdev->dev, sci_reset_control_assert, rstc);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register assert devm action, %d\n",
+ ret);
+ return ERR_PTR(ret);
+ }
+
+ p = devm_kzalloc(&pdev->dev, sizeof(struct plat_sci_port), GFP_KERNEL);
+ if (!p)
+ return ERR_PTR(-ENOMEM);
+
+ /* Get the line number from the aliases node. */
+ id = of_alias_get_id(np, "serial");
+ if (id < 0 && ~sci_ports_in_use)
+ id = ffz(sci_ports_in_use);
+ if (id < 0) {
+ dev_err(&pdev->dev, "failed to get alias id (%d)\n", id);
+ return ERR_PTR(-EINVAL);
+ }
+ if (id >= ARRAY_SIZE(sci_ports)) {
+ dev_err(&pdev->dev, "serial%d out of range\n", id);
+ return ERR_PTR(-EINVAL);
+ }
+
+ sp = &sci_ports[id];
+ *dev_id = id;
+
+ p->type = SCI_OF_TYPE(data);
+ p->regtype = SCI_OF_REGTYPE(data);
+
+ sp->has_rtscts = of_property_read_bool(np, "uart-has-rtscts");
+
+ return p;
+}
+
+static int sci_probe_single(struct platform_device *dev,
+ unsigned int index,
+ struct plat_sci_port *p,
+ struct sci_port *sciport)
+{
+ int ret;
+
+ /* Sanity check */
+ if (unlikely(index >= SCI_NPORTS)) {
+ dev_notice(&dev->dev, "Attempting to register port %d when only %d are available\n",
+ index+1, SCI_NPORTS);
+ dev_notice(&dev->dev, "Consider bumping CONFIG_SERIAL_SH_SCI_NR_UARTS!\n");
+ return -EINVAL;
+ }
+ BUILD_BUG_ON(SCI_NPORTS > sizeof(sci_ports_in_use) * 8);
+ if (sci_ports_in_use & BIT(index))
+ return -EBUSY;
+
+ mutex_lock(&sci_uart_registration_lock);
+ if (!sci_uart_driver.state) {
+ ret = uart_register_driver(&sci_uart_driver);
+ if (ret) {
+ mutex_unlock(&sci_uart_registration_lock);
+ return ret;
+ }
+ }
+ mutex_unlock(&sci_uart_registration_lock);
+
+ ret = sci_init_single(dev, sciport, index, p, false);
+ if (ret)
+ return ret;
+
+ sciport->gpios = mctrl_gpio_init(&sciport->port, 0);
+ if (IS_ERR(sciport->gpios))
+ return PTR_ERR(sciport->gpios);
+
+ if (sciport->has_rtscts) {
+ if (mctrl_gpio_to_gpiod(sciport->gpios, UART_GPIO_CTS) ||
+ mctrl_gpio_to_gpiod(sciport->gpios, UART_GPIO_RTS)) {
+ dev_err(&dev->dev, "Conflicting RTS/CTS config\n");
+ return -EINVAL;
+ }
+ sciport->port.flags |= UPF_HARD_FLOW;
+ }
+
+ ret = uart_add_one_port(&sci_uart_driver, &sciport->port);
+ if (ret) {
+ sci_cleanup_single(sciport);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int sci_probe(struct platform_device *dev)
+{
+ struct plat_sci_port *p;
+ struct sci_port *sp;
+ unsigned int dev_id;
+ int ret;
+
+ /*
+ * If we've come here via earlyprintk initialization, head off to
+ * the special early probe. We don't have sufficient device state
+ * to make it beyond this yet.
+ */
+#ifdef CONFIG_SUPERH
+ if (is_sh_early_platform_device(dev))
+ return sci_probe_earlyprintk(dev);
+#endif
+
+ if (dev->dev.of_node) {
+ p = sci_parse_dt(dev, &dev_id);
+ if (IS_ERR(p))
+ return PTR_ERR(p);
+ } else {
+ p = dev->dev.platform_data;
+ if (p == NULL) {
+ dev_err(&dev->dev, "no platform data supplied\n");
+ return -EINVAL;
+ }
+
+ dev_id = dev->id;
+ }
+
+ sp = &sci_ports[dev_id];
+ platform_set_drvdata(dev, sp);
+
+ ret = sci_probe_single(dev, dev_id, p, sp);
+ if (ret)
+ return ret;
+
+ if (sp->port.fifosize > 1) {
+ ret = device_create_file(&dev->dev, &dev_attr_rx_fifo_trigger);
+ if (ret)
+ return ret;
+ }
+ if (sp->port.type == PORT_SCIFA || sp->port.type == PORT_SCIFB ||
+ sp->port.type == PORT_HSCIF) {
+ ret = device_create_file(&dev->dev, &dev_attr_rx_fifo_timeout);
+ if (ret) {
+ if (sp->port.fifosize > 1) {
+ device_remove_file(&dev->dev,
+ &dev_attr_rx_fifo_trigger);
+ }
+ return ret;
+ }
+ }
+
+#ifdef CONFIG_SH_STANDARD_BIOS
+ sh_bios_gdb_detach();
+#endif
+
+ sci_ports_in_use |= BIT(dev_id);
+ return 0;
+}
+
+static __maybe_unused int sci_suspend(struct device *dev)
+{
+ struct sci_port *sport = dev_get_drvdata(dev);
+
+ if (sport)
+ uart_suspend_port(&sci_uart_driver, &sport->port);
+
+ return 0;
+}
+
+static __maybe_unused int sci_resume(struct device *dev)
+{
+ struct sci_port *sport = dev_get_drvdata(dev);
+
+ if (sport)
+ uart_resume_port(&sci_uart_driver, &sport->port);
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(sci_dev_pm_ops, sci_suspend, sci_resume);
+
+static struct platform_driver sci_driver = {
+ .probe = sci_probe,
+ .remove = sci_remove,
+ .driver = {
+ .name = "sh-sci",
+ .pm = &sci_dev_pm_ops,
+ .of_match_table = of_match_ptr(of_sci_match),
+ },
+};
+
+static int __init sci_init(void)
+{
+ pr_info("%s\n", banner);
+
+ return platform_driver_register(&sci_driver);
+}
+
+static void __exit sci_exit(void)
+{
+ platform_driver_unregister(&sci_driver);
+
+ if (sci_uart_driver.state)
+ uart_unregister_driver(&sci_uart_driver);
+}
+
+#if defined(CONFIG_SUPERH) && defined(CONFIG_SERIAL_SH_SCI_CONSOLE)
+sh_early_platform_init_buffer("earlyprintk", &sci_driver,
+ early_serial_buf, ARRAY_SIZE(early_serial_buf));
+#endif
+#ifdef CONFIG_SERIAL_SH_SCI_EARLYCON
+static struct plat_sci_port port_cfg __initdata;
+
+static int __init early_console_setup(struct earlycon_device *device,
+ int type)
+{
+ if (!device->port.membase)
+ return -ENODEV;
+
+ device->port.serial_in = sci_serial_in;
+ device->port.serial_out = sci_serial_out;
+ device->port.type = type;
+ memcpy(&sci_ports[0].port, &device->port, sizeof(struct uart_port));
+ port_cfg.type = type;
+ sci_ports[0].cfg = &port_cfg;
+ sci_ports[0].params = sci_probe_regmap(&port_cfg);
+ port_cfg.scscr = sci_serial_in(&sci_ports[0].port, SCSCR);
+ sci_serial_out(&sci_ports[0].port, SCSCR,
+ SCSCR_RE | SCSCR_TE | port_cfg.scscr);
+
+ device->con->write = serial_console_write;
+ return 0;
+}
+static int __init sci_early_console_setup(struct earlycon_device *device,
+ const char *opt)
+{
+ return early_console_setup(device, PORT_SCI);
+}
+static int __init scif_early_console_setup(struct earlycon_device *device,
+ const char *opt)
+{
+ return early_console_setup(device, PORT_SCIF);
+}
+static int __init rzscifa_early_console_setup(struct earlycon_device *device,
+ const char *opt)
+{
+ port_cfg.regtype = SCIx_RZ_SCIFA_REGTYPE;
+ return early_console_setup(device, PORT_SCIF);
+}
+
+static int __init scifa_early_console_setup(struct earlycon_device *device,
+ const char *opt)
+{
+ return early_console_setup(device, PORT_SCIFA);
+}
+static int __init scifb_early_console_setup(struct earlycon_device *device,
+ const char *opt)
+{
+ return early_console_setup(device, PORT_SCIFB);
+}
+static int __init hscif_early_console_setup(struct earlycon_device *device,
+ const char *opt)
+{
+ return early_console_setup(device, PORT_HSCIF);
+}
+
+OF_EARLYCON_DECLARE(sci, "renesas,sci", sci_early_console_setup);
+OF_EARLYCON_DECLARE(scif, "renesas,scif", scif_early_console_setup);
+OF_EARLYCON_DECLARE(scif, "renesas,scif-r7s9210", rzscifa_early_console_setup);
+OF_EARLYCON_DECLARE(scif, "renesas,scif-r9a07g044", rzscifa_early_console_setup);
+OF_EARLYCON_DECLARE(scifa, "renesas,scifa", scifa_early_console_setup);
+OF_EARLYCON_DECLARE(scifb, "renesas,scifb", scifb_early_console_setup);
+OF_EARLYCON_DECLARE(hscif, "renesas,hscif", hscif_early_console_setup);
+#endif /* CONFIG_SERIAL_SH_SCI_EARLYCON */
+
+module_init(sci_init);
+module_exit(sci_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:sh-sci");
+MODULE_AUTHOR("Paul Mundt");
+MODULE_DESCRIPTION("SuperH (H)SCI(F) serial driver");