summaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--drivers/tty/serial/amba-pl011.c60
-rw-r--r--drivers/tty/serial/max310x.c53
2 files changed, 73 insertions, 40 deletions
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index c74eaf255..2f0f05259 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1345,11 +1345,41 @@ static void pl011_start_tx_pio(struct uart_amba_port *uap)
}
}
+static void pl011_rs485_tx_start(struct uart_amba_port *uap)
+{
+ struct uart_port *port = &uap->port;
+ u32 cr;
+
+ /* Enable transmitter */
+ cr = pl011_read(uap, REG_CR);
+ cr |= UART011_CR_TXE;
+
+ /* Disable receiver if half-duplex */
+ if (!(port->rs485.flags & SER_RS485_RX_DURING_TX))
+ cr &= ~UART011_CR_RXE;
+
+ if (port->rs485.flags & SER_RS485_RTS_ON_SEND)
+ cr &= ~UART011_CR_RTS;
+ else
+ cr |= UART011_CR_RTS;
+
+ pl011_write(cr, uap, REG_CR);
+
+ if (port->rs485.delay_rts_before_send)
+ mdelay(port->rs485.delay_rts_before_send);
+
+ uap->rs485_tx_started = true;
+}
+
static void pl011_start_tx(struct uart_port *port)
{
struct uart_amba_port *uap =
container_of(port, struct uart_amba_port, port);
+ if ((uap->port.rs485.flags & SER_RS485_ENABLED) &&
+ !uap->rs485_tx_started)
+ pl011_rs485_tx_start(uap);
+
if (!pl011_dma_tx_start(uap))
pl011_start_tx_pio(uap);
}
@@ -1431,42 +1461,12 @@ static bool pl011_tx_char(struct uart_amba_port *uap, unsigned char c,
return true;
}
-static void pl011_rs485_tx_start(struct uart_amba_port *uap)
-{
- struct uart_port *port = &uap->port;
- u32 cr;
-
- /* Enable transmitter */
- cr = pl011_read(uap, REG_CR);
- cr |= UART011_CR_TXE;
-
- /* Disable receiver if half-duplex */
- if (!(port->rs485.flags & SER_RS485_RX_DURING_TX))
- cr &= ~UART011_CR_RXE;
-
- if (port->rs485.flags & SER_RS485_RTS_ON_SEND)
- cr &= ~UART011_CR_RTS;
- else
- cr |= UART011_CR_RTS;
-
- pl011_write(cr, uap, REG_CR);
-
- if (port->rs485.delay_rts_before_send)
- mdelay(port->rs485.delay_rts_before_send);
-
- uap->rs485_tx_started = true;
-}
-
/* Returns true if tx interrupts have to be (kept) enabled */
static bool pl011_tx_chars(struct uart_amba_port *uap, bool from_irq)
{
struct circ_buf *xmit = &uap->port.state->xmit;
int count = uap->fifosize >> 1;
- if ((uap->port.rs485.flags & SER_RS485_ENABLED) &&
- !uap->rs485_tx_started)
- pl011_rs485_tx_start(uap);
-
if (uap->port.x_char) {
if (!pl011_tx_char(uap, uap->port.x_char, from_irq))
return true;
diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index 338cb19de..163a89f84 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -237,6 +237,14 @@
#define MAX310x_REV_MASK (0xf8)
#define MAX310X_WRITE_BIT 0x80
+/* Port startup definitions */
+#define MAX310X_PORT_STARTUP_WAIT_RETRIES 20 /* Number of retries */
+#define MAX310X_PORT_STARTUP_WAIT_DELAY_MS 10 /* Delay between retries */
+
+/* Crystal-related definitions */
+#define MAX310X_XTAL_WAIT_RETRIES 20 /* Number of retries */
+#define MAX310X_XTAL_WAIT_DELAY_MS 10 /* Delay between retries */
+
/* MAX3107 specific */
#define MAX3107_REV_ID (0xa0)
@@ -583,7 +591,7 @@ static int max310x_update_best_err(unsigned long f, long *besterr)
return 1;
}
-static u32 max310x_set_ref_clk(struct device *dev, struct max310x_port *s,
+static s32 max310x_set_ref_clk(struct device *dev, struct max310x_port *s,
unsigned long freq, bool xtal)
{
unsigned int div, clksrc, pllcfg = 0;
@@ -641,12 +649,20 @@ static u32 max310x_set_ref_clk(struct device *dev, struct max310x_port *s,
/* Wait for crystal */
if (xtal) {
- unsigned int val;
- msleep(10);
- regmap_read(s->regmap, MAX310X_STS_IRQSTS_REG, &val);
- if (!(val & MAX310X_STS_CLKREADY_BIT)) {
- dev_warn(dev, "clock is not stable yet\n");
- }
+ bool stable = false;
+ unsigned int try = 0, val = 0;
+
+ do {
+ msleep(MAX310X_XTAL_WAIT_DELAY_MS);
+ regmap_read(s->regmap, MAX310X_STS_IRQSTS_REG, &val);
+
+ if (val & MAX310X_STS_CLKREADY_BIT)
+ stable = true;
+ } while (!stable && (++try < MAX310X_XTAL_WAIT_RETRIES));
+
+ if (!stable)
+ return dev_err_probe(dev, -EAGAIN,
+ "clock is not stable\n");
}
return bestfreq;
@@ -1274,7 +1290,7 @@ static int max310x_probe(struct device *dev, const struct max310x_devtype *devty
{
int i, ret, fmin, fmax, freq;
struct max310x_port *s;
- u32 uartclk = 0;
+ s32 uartclk = 0;
bool xtal;
for (i = 0; i < devtype->nr; i++)
@@ -1337,6 +1353,9 @@ static int max310x_probe(struct device *dev, const struct max310x_devtype *devty
goto out_clk;
for (i = 0; i < devtype->nr; i++) {
+ bool started = false;
+ unsigned int try = 0, val = 0;
+
/* Reset port */
regmap_write(regmaps[i], MAX310X_MODE2_REG,
MAX310X_MODE2_RST_BIT);
@@ -1345,13 +1364,27 @@ static int max310x_probe(struct device *dev, const struct max310x_devtype *devty
/* Wait for port startup */
do {
- regmap_read(regmaps[i], MAX310X_BRGDIVLSB_REG, &ret);
- } while (ret != 0x01);
+ msleep(MAX310X_PORT_STARTUP_WAIT_DELAY_MS);
+ regmap_read(regmaps[i], MAX310X_BRGDIVLSB_REG, &val);
+
+ if (val == 0x01)
+ started = true;
+ } while (!started && (++try < MAX310X_PORT_STARTUP_WAIT_RETRIES));
+
+ if (!started) {
+ ret = dev_err_probe(dev, -EAGAIN, "port reset failed\n");
+ goto out_uart;
+ }
regmap_write(regmaps[i], MAX310X_MODE1_REG, devtype->mode1);
}
uartclk = max310x_set_ref_clk(dev, s, freq, xtal);
+ if (uartclk < 0) {
+ ret = uartclk;
+ goto out_uart;
+ }
+
dev_dbg(dev, "Reference clock set to %i Hz\n", uartclk);
for (i = 0; i < devtype->nr; i++) {
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-28 13:54:35 +0000