diff options
Diffstat (limited to 'drivers/usb/dwc3/gadget.c')
| -rw-r--r-- | drivers/usb/dwc3/gadget.c | 4628 |
1 files changed, 4628 insertions, 0 deletions
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c new file mode 100644 index 000000000..c4703f6b2 --- /dev/null +++ b/drivers/usb/dwc3/gadget.c @@ -0,0 +1,4628 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * gadget.c - DesignWare USB3 DRD Controller Gadget Framework Link + * + * Copyright (C) 2010-2011 Texas Instruments Incorporated - https://www.ti.com + * + * Authors: Felipe Balbi <balbi@ti.com>, + * Sebastian Andrzej Siewior <bigeasy@linutronix.de> + */ + +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/list.h> +#include <linux/dma-mapping.h> + +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> + +#include "debug.h" +#include "core.h" +#include "gadget.h" +#include "io.h" + +#define DWC3_ALIGN_FRAME(d, n) (((d)->frame_number + ((d)->interval * (n))) \ + & ~((d)->interval - 1)) + +/** + * dwc3_gadget_set_test_mode - enables usb2 test modes + * @dwc: pointer to our context structure + * @mode: the mode to set (J, K SE0 NAK, Force Enable) + * + * Caller should take care of locking. This function will return 0 on + * success or -EINVAL if wrong Test Selector is passed. + */ +int dwc3_gadget_set_test_mode(struct dwc3 *dwc, int mode) +{ + u32 reg; + + reg = dwc3_readl(dwc->regs, DWC3_DCTL); + reg &= ~DWC3_DCTL_TSTCTRL_MASK; + + switch (mode) { + case USB_TEST_J: + case USB_TEST_K: + case USB_TEST_SE0_NAK: + case USB_TEST_PACKET: + case USB_TEST_FORCE_ENABLE: + reg |= mode << 1; + break; + default: + return -EINVAL; + } + + dwc3_gadget_dctl_write_safe(dwc, reg); + + return 0; +} + +/** + * dwc3_gadget_get_link_state - gets current state of usb link + * @dwc: pointer to our context structure + * + * Caller should take care of locking. This function will + * return the link state on success (>= 0) or -ETIMEDOUT. + */ +int dwc3_gadget_get_link_state(struct dwc3 *dwc) +{ + u32 reg; + + reg = dwc3_readl(dwc->regs, DWC3_DSTS); + + return DWC3_DSTS_USBLNKST(reg); +} + +/** + * dwc3_gadget_set_link_state - sets usb link to a particular state + * @dwc: pointer to our context structure + * @state: the state to put link into + * + * Caller should take care of locking. This function will + * return 0 on success or -ETIMEDOUT. + */ +int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state) +{ + int retries = 10000; + u32 reg; + + /* + * Wait until device controller is ready. Only applies to 1.94a and + * later RTL. + */ + if (!DWC3_VER_IS_PRIOR(DWC3, 194A)) { + while (--retries) { + reg = dwc3_readl(dwc->regs, DWC3_DSTS); + if (reg & DWC3_DSTS_DCNRD) + udelay(5); + else + break; + } + + if (retries <= 0) + return -ETIMEDOUT; + } + + reg = dwc3_readl(dwc->regs, DWC3_DCTL); + reg &= ~DWC3_DCTL_ULSTCHNGREQ_MASK; + + /* set no action before sending new link state change */ + dwc3_writel(dwc->regs, DWC3_DCTL, reg); + + /* set requested state */ + reg |= DWC3_DCTL_ULSTCHNGREQ(state); + dwc3_writel(dwc->regs, DWC3_DCTL, reg); + + /* + * The following code is racy when called from dwc3_gadget_wakeup, + * and is not needed, at least on newer versions + */ + if (!DWC3_VER_IS_PRIOR(DWC3, 194A)) + return 0; + + /* wait for a change in DSTS */ + retries = 10000; + while (--retries) { + reg = dwc3_readl(dwc->regs, DWC3_DSTS); + + if (DWC3_DSTS_USBLNKST(reg) == state) + return 0; + + udelay(5); + } + + return -ETIMEDOUT; +} + +static void dwc3_ep0_reset_state(struct dwc3 *dwc) +{ + unsigned int dir; + + if (dwc->ep0state != EP0_SETUP_PHASE) { + dir = !!dwc->ep0_expect_in; + if (dwc->ep0state == EP0_DATA_PHASE) + dwc3_ep0_end_control_data(dwc, dwc->eps[dir]); + else + dwc3_ep0_end_control_data(dwc, dwc->eps[!dir]); + + dwc->eps[0]->trb_enqueue = 0; + dwc->eps[1]->trb_enqueue = 0; + + dwc3_ep0_stall_and_restart(dwc); + } +} + +/** + * dwc3_ep_inc_trb - increment a trb index. + * @index: Pointer to the TRB index to increment. + * + * The index should never point to the link TRB. After incrementing, + * if it is point to the link TRB, wrap around to the beginning. The + * link TRB is always at the last TRB entry. + */ +static void dwc3_ep_inc_trb(u8 *index) +{ + (*index)++; + if (*index == (DWC3_TRB_NUM - 1)) + *index = 0; +} + +/** + * dwc3_ep_inc_enq - increment endpoint's enqueue pointer + * @dep: The endpoint whose enqueue pointer we're incrementing + */ +static void dwc3_ep_inc_enq(struct dwc3_ep *dep) +{ + dwc3_ep_inc_trb(&dep->trb_enqueue); +} + +/** + * dwc3_ep_inc_deq - increment endpoint's dequeue pointer + * @dep: The endpoint whose enqueue pointer we're incrementing + */ +static void dwc3_ep_inc_deq(struct dwc3_ep *dep) +{ + dwc3_ep_inc_trb(&dep->trb_dequeue); +} + +static void dwc3_gadget_del_and_unmap_request(struct dwc3_ep *dep, + struct dwc3_request *req, int status) +{ + struct dwc3 *dwc = dep->dwc; + + list_del(&req->list); + req->remaining = 0; + req->needs_extra_trb = false; + req->num_trbs = 0; + + if (req->request.status == -EINPROGRESS) + req->request.status = status; + + if (req->trb) + usb_gadget_unmap_request_by_dev(dwc->sysdev, + &req->request, req->direction); + + req->trb = NULL; + trace_dwc3_gadget_giveback(req); + + if (dep->number > 1) + pm_runtime_put(dwc->dev); +} + +/** + * dwc3_gadget_giveback - call struct usb_request's ->complete callback + * @dep: The endpoint to whom the request belongs to + * @req: The request we're giving back + * @status: completion code for the request + * + * Must be called with controller's lock held and interrupts disabled. This + * function will unmap @req and call its ->complete() callback to notify upper + * layers that it has completed. + */ +void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req, + int status) +{ + struct dwc3 *dwc = dep->dwc; + + dwc3_gadget_del_and_unmap_request(dep, req, status); + req->status = DWC3_REQUEST_STATUS_COMPLETED; + + spin_unlock(&dwc->lock); + usb_gadget_giveback_request(&dep->endpoint, &req->request); + spin_lock(&dwc->lock); +} + +/** + * dwc3_send_gadget_generic_command - issue a generic command for the controller + * @dwc: pointer to the controller context + * @cmd: the command to be issued + * @param: command parameter + * + * Caller should take care of locking. Issue @cmd with a given @param to @dwc + * and wait for its completion. + */ +int dwc3_send_gadget_generic_command(struct dwc3 *dwc, unsigned int cmd, + u32 param) +{ + u32 timeout = 500; + int status = 0; + int ret = 0; + u32 reg; + + dwc3_writel(dwc->regs, DWC3_DGCMDPAR, param); + dwc3_writel(dwc->regs, DWC3_DGCMD, cmd | DWC3_DGCMD_CMDACT); + + do { + reg = dwc3_readl(dwc->regs, DWC3_DGCMD); + if (!(reg & DWC3_DGCMD_CMDACT)) { + status = DWC3_DGCMD_STATUS(reg); + if (status) + ret = -EINVAL; + break; + } + } while (--timeout); + + if (!timeout) { + ret = -ETIMEDOUT; + status = -ETIMEDOUT; + } + + trace_dwc3_gadget_generic_cmd(cmd, param, status); + + return ret; +} + +static int __dwc3_gadget_wakeup(struct dwc3 *dwc); + +/** + * dwc3_send_gadget_ep_cmd - issue an endpoint command + * @dep: the endpoint to which the command is going to be issued + * @cmd: the command to be issued + * @params: parameters to the command + * + * Caller should handle locking. This function will issue @cmd with given + * @params to @dep and wait for its completion. + */ +int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned int cmd, + struct dwc3_gadget_ep_cmd_params *params) +{ + const struct usb_endpoint_descriptor *desc = dep->endpoint.desc; + struct dwc3 *dwc = dep->dwc; + u32 timeout = 5000; + u32 saved_config = 0; + u32 reg; + + int cmd_status = 0; + int ret = -EINVAL; + + /* + * When operating in USB 2.0 speeds (HS/FS), if GUSB2PHYCFG.ENBLSLPM or + * GUSB2PHYCFG.SUSPHY is set, it must be cleared before issuing an + * endpoint command. + * + * Save and clear both GUSB2PHYCFG.ENBLSLPM and GUSB2PHYCFG.SUSPHY + * settings. Restore them after the command is completed. + * + * DWC_usb3 3.30a and DWC_usb31 1.90a programming guide section 3.2.2 + */ + if (dwc->gadget->speed <= USB_SPEED_HIGH || + DWC3_DEPCMD_CMD(cmd) == DWC3_DEPCMD_ENDTRANSFER) { + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); + if (unlikely(reg & DWC3_GUSB2PHYCFG_SUSPHY)) { + saved_config |= DWC3_GUSB2PHYCFG_SUSPHY; + reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; + } + + if (reg & DWC3_GUSB2PHYCFG_ENBLSLPM) { + saved_config |= DWC3_GUSB2PHYCFG_ENBLSLPM; + reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM; + } + + if (saved_config) + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); + } + + if (DWC3_DEPCMD_CMD(cmd) == DWC3_DEPCMD_STARTTRANSFER) { + int link_state; + + /* + * Initiate remote wakeup if the link state is in U3 when + * operating in SS/SSP or L1/L2 when operating in HS/FS. If the + * link state is in U1/U2, no remote wakeup is needed. The Start + * Transfer command will initiate the link recovery. + */ + link_state = dwc3_gadget_get_link_state(dwc); + switch (link_state) { + case DWC3_LINK_STATE_U2: + if (dwc->gadget->speed >= USB_SPEED_SUPER) + break; + + fallthrough; + case DWC3_LINK_STATE_U3: + ret = __dwc3_gadget_wakeup(dwc); + dev_WARN_ONCE(dwc->dev, ret, "wakeup failed --> %d\n", + ret); + break; + } + } + + /* + * For some commands such as Update Transfer command, DEPCMDPARn + * registers are reserved. Since the driver often sends Update Transfer + * command, don't write to DEPCMDPARn to avoid register write delays and + * improve performance. + */ + if (DWC3_DEPCMD_CMD(cmd) != DWC3_DEPCMD_UPDATETRANSFER) { + dwc3_writel(dep->regs, DWC3_DEPCMDPAR0, params->param0); + dwc3_writel(dep->regs, DWC3_DEPCMDPAR1, params->param1); + dwc3_writel(dep->regs, DWC3_DEPCMDPAR2, params->param2); + } + + /* + * Synopsys Databook 2.60a states in section 6.3.2.5.6 of that if we're + * not relying on XferNotReady, we can make use of a special "No + * Response Update Transfer" command where we should clear both CmdAct + * and CmdIOC bits. + * + * With this, we don't need to wait for command completion and can + * straight away issue further commands to the endpoint. + * + * NOTICE: We're making an assumption that control endpoints will never + * make use of Update Transfer command. This is a safe assumption + * because we can never have more than one request at a time with + * Control Endpoints. If anybody changes that assumption, this chunk + * needs to be updated accordingly. + */ + if (DWC3_DEPCMD_CMD(cmd) == DWC3_DEPCMD_UPDATETRANSFER && + !usb_endpoint_xfer_isoc(desc)) + cmd &= ~(DWC3_DEPCMD_CMDIOC | DWC3_DEPCMD_CMDACT); + else + cmd |= DWC3_DEPCMD_CMDACT; + + dwc3_writel(dep->regs, DWC3_DEPCMD, cmd); + + if (!(cmd & DWC3_DEPCMD_CMDACT) || + (DWC3_DEPCMD_CMD(cmd) == DWC3_DEPCMD_ENDTRANSFER && + !(cmd & DWC3_DEPCMD_CMDIOC))) { + ret = 0; + goto skip_status; + } + + do { + reg = dwc3_readl(dep->regs, DWC3_DEPCMD); + if (!(reg & DWC3_DEPCMD_CMDACT)) { + cmd_status = DWC3_DEPCMD_STATUS(reg); + + switch (cmd_status) { + case 0: + ret = 0; + break; + case DEPEVT_TRANSFER_NO_RESOURCE: + dev_WARN(dwc->dev, "No resource for %s\n", + dep->name); + ret = -EINVAL; + break; + case DEPEVT_TRANSFER_BUS_EXPIRY: + /* + * SW issues START TRANSFER command to + * isochronous ep with future frame interval. If + * future interval time has already passed when + * core receives the command, it will respond + * with an error status of 'Bus Expiry'. + * + * Instead of always returning -EINVAL, let's + * give a hint to the gadget driver that this is + * the case by returning -EAGAIN. + */ + ret = -EAGAIN; + break; + default: + dev_WARN(dwc->dev, "UNKNOWN cmd status\n"); + } + + break; + } + } while (--timeout); + + if (timeout == 0) { + ret = -ETIMEDOUT; + cmd_status = -ETIMEDOUT; + } + +skip_status: + trace_dwc3_gadget_ep_cmd(dep, cmd, params, cmd_status); + + if (DWC3_DEPCMD_CMD(cmd) == DWC3_DEPCMD_STARTTRANSFER) { + if (ret == 0) + dep->flags |= DWC3_EP_TRANSFER_STARTED; + + if (ret != -ETIMEDOUT) + dwc3_gadget_ep_get_transfer_index(dep); + } + + if (saved_config) { + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); + reg |= saved_config; + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); + } + + return ret; +} + +static int dwc3_send_clear_stall_ep_cmd(struct dwc3_ep *dep) +{ + struct dwc3 *dwc = dep->dwc; + struct dwc3_gadget_ep_cmd_params params; + u32 cmd = DWC3_DEPCMD_CLEARSTALL; + + /* + * As of core revision 2.60a the recommended programming model + * is to set the ClearPendIN bit when issuing a Clear Stall EP + * command for IN endpoints. This is to prevent an issue where + * some (non-compliant) hosts may not send ACK TPs for pending + * IN transfers due to a mishandled error condition. Synopsys + * STAR 9000614252. + */ + if (dep->direction && + !DWC3_VER_IS_PRIOR(DWC3, 260A) && + (dwc->gadget->speed >= USB_SPEED_SUPER)) + cmd |= DWC3_DEPCMD_CLEARPENDIN; + + memset(¶ms, 0, sizeof(params)); + + return dwc3_send_gadget_ep_cmd(dep, cmd, ¶ms); +} + +static dma_addr_t dwc3_trb_dma_offset(struct dwc3_ep *dep, + struct dwc3_trb *trb) +{ + u32 offset = (char *) trb - (char *) dep->trb_pool; + + return dep->trb_pool_dma + offset; +} + +static int dwc3_alloc_trb_pool(struct dwc3_ep *dep) +{ + struct dwc3 *dwc = dep->dwc; + + if (dep->trb_pool) + return 0; + + dep->trb_pool = dma_alloc_coherent(dwc->sysdev, + sizeof(struct dwc3_trb) * DWC3_TRB_NUM, + &dep->trb_pool_dma, GFP_KERNEL); + if (!dep->trb_pool) { + dev_err(dep->dwc->dev, "failed to allocate trb pool for %s\n", + dep->name); + return -ENOMEM; + } + + return 0; +} + +static void dwc3_free_trb_pool(struct dwc3_ep *dep) +{ + struct dwc3 *dwc = dep->dwc; + + dma_free_coherent(dwc->sysdev, sizeof(struct dwc3_trb) * DWC3_TRB_NUM, + dep->trb_pool, dep->trb_pool_dma); + + dep->trb_pool = NULL; + dep->trb_pool_dma = 0; +} + +static int dwc3_gadget_set_xfer_resource(struct dwc3_ep *dep) +{ + struct dwc3_gadget_ep_cmd_params params; + + memset(¶ms, 0x00, sizeof(params)); + + params.param0 = DWC3_DEPXFERCFG_NUM_XFER_RES(1); + + return dwc3_send_gadget_ep_cmd(dep, DWC3_DEPCMD_SETTRANSFRESOURCE, + ¶ms); +} + +/** + * dwc3_gadget_start_config - configure ep resources + * @dep: endpoint that is being enabled + * + * Issue a %DWC3_DEPCMD_DEPSTARTCFG command to @dep. After the command's + * completion, it will set Transfer Resource for all available endpoints. + * + * The assignment of transfer resources cannot perfectly follow the data book + * due to the fact that the controller driver does not have all knowledge of the + * configuration in advance. It is given this information piecemeal by the + * composite gadget framework after every SET_CONFIGURATION and + * SET_INTERFACE. Trying to follow the databook programming model in this + * scenario can cause errors. For two reasons: + * + * 1) The databook says to do %DWC3_DEPCMD_DEPSTARTCFG for every + * %USB_REQ_SET_CONFIGURATION and %USB_REQ_SET_INTERFACE (8.1.5). This is + * incorrect in the scenario of multiple interfaces. + * + * 2) The databook does not mention doing more %DWC3_DEPCMD_DEPXFERCFG for new + * endpoint on alt setting (8.1.6). + * + * The following simplified method is used instead: + * + * All hardware endpoints can be assigned a transfer resource and this setting + * will stay persistent until either a core reset or hibernation. So whenever we + * do a %DWC3_DEPCMD_DEPSTARTCFG(0) we can go ahead and do + * %DWC3_DEPCMD_DEPXFERCFG for every hardware endpoint as well. We are + * guaranteed that there are as many transfer resources as endpoints. + * + * This function is called for each endpoint when it is being enabled but is + * triggered only when called for EP0-out, which always happens first, and which + * should only happen in one of the above conditions. + */ +static int dwc3_gadget_start_config(struct dwc3_ep *dep) +{ + struct dwc3_gadget_ep_cmd_params params; + struct dwc3 *dwc; + u32 cmd; + int i; + int ret; + + if (dep->number) + return 0; + + memset(¶ms, 0x00, sizeof(params)); + cmd = DWC3_DEPCMD_DEPSTARTCFG; + dwc = dep->dwc; + + ret = dwc3_send_gadget_ep_cmd(dep, cmd, ¶ms); + if (ret) + return ret; + + for (i = 0; i < DWC3_ENDPOINTS_NUM; i++) { + struct dwc3_ep *dep = dwc->eps[i]; + + if (!dep) + continue; + + ret = dwc3_gadget_set_xfer_resource(dep); + if (ret) + return ret; + } + + return 0; +} + +static int dwc3_gadget_set_ep_config(struct dwc3_ep *dep, unsigned int action) +{ + const struct usb_ss_ep_comp_descriptor *comp_desc; + const struct usb_endpoint_descriptor *desc; + struct dwc3_gadget_ep_cmd_params params; + struct dwc3 *dwc = dep->dwc; + + comp_desc = dep->endpoint.comp_desc; + desc = dep->endpoint.desc; + + memset(¶ms, 0x00, sizeof(params)); + + params.param0 = DWC3_DEPCFG_EP_TYPE(usb_endpoint_type(desc)) + | DWC3_DEPCFG_MAX_PACKET_SIZE(usb_endpoint_maxp(desc)); + + /* Burst size is only needed in SuperSpeed mode */ + if (dwc->gadget->speed >= USB_SPEED_SUPER) { + u32 burst = dep->endpoint.maxburst; + + params.param0 |= DWC3_DEPCFG_BURST_SIZE(burst - 1); + } + + params.param0 |= action; + if (action == DWC3_DEPCFG_ACTION_RESTORE) + params.param2 |= dep->saved_state; + + if (usb_endpoint_xfer_control(desc)) + params.param1 = DWC3_DEPCFG_XFER_COMPLETE_EN; + + if (dep->number <= 1 || usb_endpoint_xfer_isoc(desc)) + params.param1 |= DWC3_DEPCFG_XFER_NOT_READY_EN; + + if (usb_ss_max_streams(comp_desc) && usb_endpoint_xfer_bulk(desc)) { + params.param1 |= DWC3_DEPCFG_STREAM_CAPABLE + | DWC3_DEPCFG_XFER_COMPLETE_EN + | DWC3_DEPCFG_STREAM_EVENT_EN; + dep->stream_capable = true; + } + + if (!usb_endpoint_xfer_control(desc)) + params.param1 |= DWC3_DEPCFG_XFER_IN_PROGRESS_EN; + + /* + * We are doing 1:1 mapping for endpoints, meaning + * Physical Endpoints 2 maps to Logical Endpoint 2 and + * so on. We consider the direction bit as part of the physical + * endpoint number. So USB endpoint 0x81 is 0x03. + */ + params.param1 |= DWC3_DEPCFG_EP_NUMBER(dep->number); + + /* + * We must use the lower 16 TX FIFOs even though + * HW might have more + */ + if (dep->direction) + params.param0 |= DWC3_DEPCFG_FIFO_NUMBER(dep->number >> 1); + + if (desc->bInterval) { + u8 bInterval_m1; + + /* + * Valid range for DEPCFG.bInterval_m1 is from 0 to 13. + * + * NOTE: The programming guide incorrectly stated bInterval_m1 + * must be set to 0 when operating in fullspeed. Internally the + * controller does not have this limitation. See DWC_usb3x + * programming guide section 3.2.2.1. + */ + bInterval_m1 = min_t(u8, desc->bInterval - 1, 13); + + if (usb_endpoint_type(desc) == USB_ENDPOINT_XFER_INT && + dwc->gadget->speed == USB_SPEED_FULL) + dep->interval = desc->bInterval; + else + dep->interval = 1 << (desc->bInterval - 1); + + params.param1 |= DWC3_DEPCFG_BINTERVAL_M1(bInterval_m1); + } + + return dwc3_send_gadget_ep_cmd(dep, DWC3_DEPCMD_SETEPCONFIG, ¶ms); +} + +/** + * dwc3_gadget_calc_tx_fifo_size - calculates the txfifo size value + * @dwc: pointer to the DWC3 context + * @mult: multiplier to be used when calculating the fifo_size + * + * Calculates the size value based on the equation below: + * + * DWC3 revision 280A and prior: + * fifo_size = mult * (max_packet / mdwidth) + 1; + * + * DWC3 revision 290A and onwards: + * fifo_size = mult * ((max_packet + mdwidth)/mdwidth + 1) + 1 + * + * The max packet size is set to 1024, as the txfifo requirements mainly apply + * to super speed USB use cases. However, it is safe to overestimate the fifo + * allocations for other scenarios, i.e. high speed USB. + */ +static int dwc3_gadget_calc_tx_fifo_size(struct dwc3 *dwc, int mult) +{ + int max_packet = 1024; + int fifo_size; + int mdwidth; + + mdwidth = dwc3_mdwidth(dwc); + + /* MDWIDTH is represented in bits, we need it in bytes */ + mdwidth >>= 3; + + if (DWC3_VER_IS_PRIOR(DWC3, 290A)) + fifo_size = mult * (max_packet / mdwidth) + 1; + else + fifo_size = mult * ((max_packet + mdwidth) / mdwidth) + 1; + return fifo_size; +} + +/** + * dwc3_gadget_clear_tx_fifos - Clears txfifo allocation + * @dwc: pointer to the DWC3 context + * + * Iterates through all the endpoint registers and clears the previous txfifo + * allocations. + */ +void dwc3_gadget_clear_tx_fifos(struct dwc3 *dwc) +{ + struct dwc3_ep *dep; + int fifo_depth; + int size; + int num; + + if (!dwc->do_fifo_resize) + return; + + /* Read ep0IN related TXFIFO size */ + dep = dwc->eps[1]; + size = dwc3_readl(dwc->regs, DWC3_GTXFIFOSIZ(0)); + if (DWC3_IP_IS(DWC3)) + fifo_depth = DWC3_GTXFIFOSIZ_TXFDEP(size); + else + fifo_depth = DWC31_GTXFIFOSIZ_TXFDEP(size); + + dwc->last_fifo_depth = fifo_depth; + /* Clear existing TXFIFO for all IN eps except ep0 */ + for (num = 3; num < min_t(int, dwc->num_eps, DWC3_ENDPOINTS_NUM); + num += 2) { + dep = dwc->eps[num]; + /* Don't change TXFRAMNUM on usb31 version */ + size = DWC3_IP_IS(DWC3) ? 0 : + dwc3_readl(dwc->regs, DWC3_GTXFIFOSIZ(num >> 1)) & + DWC31_GTXFIFOSIZ_TXFRAMNUM; + + dwc3_writel(dwc->regs, DWC3_GTXFIFOSIZ(num >> 1), size); + dep->flags &= ~DWC3_EP_TXFIFO_RESIZED; + } + dwc->num_ep_resized = 0; +} + +/* + * dwc3_gadget_resize_tx_fifos - reallocate fifo spaces for current use-case + * @dwc: pointer to our context structure + * + * This function will a best effort FIFO allocation in order + * to improve FIFO usage and throughput, while still allowing + * us to enable as many endpoints as possible. + * + * Keep in mind that this operation will be highly dependent + * on the configured size for RAM1 - which contains TxFifo -, + * the amount of endpoints enabled on coreConsultant tool, and + * the width of the Master Bus. + * + * In general, FIFO depths are represented with the following equation: + * + * fifo_size = mult * ((max_packet + mdwidth)/mdwidth + 1) + 1 + * + * In conjunction with dwc3_gadget_check_config(), this resizing logic will + * ensure that all endpoints will have enough internal memory for one max + * packet per endpoint. + */ +static int dwc3_gadget_resize_tx_fifos(struct dwc3_ep *dep) +{ + struct dwc3 *dwc = dep->dwc; + int fifo_0_start; + int ram1_depth; + int fifo_size; + int min_depth; + int num_in_ep; + int remaining; + int num_fifos = 1; + int fifo; + int tmp; + + if (!dwc->do_fifo_resize) + return 0; + + /* resize IN endpoints except ep0 */ + if (!usb_endpoint_dir_in(dep->endpoint.desc) || dep->number <= 1) + return 0; + + /* bail if already resized */ + if (dep->flags & DWC3_EP_TXFIFO_RESIZED) + return 0; + + ram1_depth = DWC3_RAM1_DEPTH(dwc->hwparams.hwparams7); + + if ((dep->endpoint.maxburst > 1 && + usb_endpoint_xfer_bulk(dep->endpoint.desc)) || + usb_endpoint_xfer_isoc(dep->endpoint.desc)) + num_fifos = 3; + + if (dep->endpoint.maxburst > 6 && + (usb_endpoint_xfer_bulk(dep->endpoint.desc) || + usb_endpoint_xfer_isoc(dep->endpoint.desc)) && DWC3_IP_IS(DWC31)) + num_fifos = dwc->tx_fifo_resize_max_num; + + /* FIFO size for a single buffer */ + fifo = dwc3_gadget_calc_tx_fifo_size(dwc, 1); + + /* Calculate the number of remaining EPs w/o any FIFO */ + num_in_ep = dwc->max_cfg_eps; + num_in_ep -= dwc->num_ep_resized; + + /* Reserve at least one FIFO for the number of IN EPs */ + min_depth = num_in_ep * (fifo + 1); + remaining = ram1_depth - min_depth - dwc->last_fifo_depth; + remaining = max_t(int, 0, remaining); + /* + * We've already reserved 1 FIFO per EP, so check what we can fit in + * addition to it. If there is not enough remaining space, allocate + * all the remaining space to the EP. + */ + fifo_size = (num_fifos - 1) * fifo; + if (remaining < fifo_size) + fifo_size = remaining; + + fifo_size += fifo; + /* Last increment according to the TX FIFO size equation */ + fifo_size++; + + /* Check if TXFIFOs start at non-zero addr */ + tmp = dwc3_readl(dwc->regs, DWC3_GTXFIFOSIZ(0)); + fifo_0_start = DWC3_GTXFIFOSIZ_TXFSTADDR(tmp); + + fifo_size |= (fifo_0_start + (dwc->last_fifo_depth << 16)); + if (DWC3_IP_IS(DWC3)) + dwc->last_fifo_depth += DWC3_GTXFIFOSIZ_TXFDEP(fifo_size); + else + dwc->last_fifo_depth += DWC31_GTXFIFOSIZ_TXFDEP(fifo_size); + + /* Check fifo size allocation doesn't exceed available RAM size. */ + if (dwc->last_fifo_depth >= ram1_depth) { + dev_err(dwc->dev, "Fifosize(%d) > RAM size(%d) %s depth:%d\n", + dwc->last_fifo_depth, ram1_depth, + dep->endpoint.name, fifo_size); + if (DWC3_IP_IS(DWC3)) + fifo_size = DWC3_GTXFIFOSIZ_TXFDEP(fifo_size); + else + fifo_size = DWC31_GTXFIFOSIZ_TXFDEP(fifo_size); + + dwc->last_fifo_depth -= fifo_size; + return -ENOMEM; + } + + dwc3_writel(dwc->regs, DWC3_GTXFIFOSIZ(dep->number >> 1), fifo_size); + dep->flags |= DWC3_EP_TXFIFO_RESIZED; + dwc->num_ep_resized++; + + return 0; +} + +/** + * __dwc3_gadget_ep_enable - initializes a hw endpoint + * @dep: endpoint to be initialized + * @action: one of INIT, MODIFY or RESTORE + * + * Caller should take care of locking. Execute all necessary commands to + * initialize a HW endpoint so it can be used by a gadget driver. + */ +static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, unsigned int action) +{ + const struct usb_endpoint_descriptor *desc = dep->endpoint.desc; + struct dwc3 *dwc = dep->dwc; + + u32 reg; + int ret; + + if (!(dep->flags & DWC3_EP_ENABLED)) { + ret = dwc3_gadget_resize_tx_fifos(dep); + if (ret) + return ret; + + ret = dwc3_gadget_start_config(dep); + if (ret) + return ret; + } + + ret = dwc3_gadget_set_ep_config(dep, action); + if (ret) + return ret; + + if (!(dep->flags & DWC3_EP_ENABLED)) { + struct dwc3_trb *trb_st_hw; + struct dwc3_trb *trb_link; + + dep->type = usb_endpoint_type(desc); + dep->flags |= DWC3_EP_ENABLED; + + reg = dwc3_readl(dwc->regs, DWC3_DALEPENA); + reg |= DWC3_DALEPENA_EP(dep->number); + dwc3_writel(dwc->regs, DWC3_DALEPENA, reg); + + dep->trb_dequeue = 0; + dep->trb_enqueue = 0; + + if (usb_endpoint_xfer_control(desc)) + goto out; + + /* Initialize the TRB ring */ + memset(dep->trb_pool, 0, + sizeof(struct dwc3_trb) * DWC3_TRB_NUM); + + /* Link TRB. The HWO bit is never reset */ + trb_st_hw = &dep->trb_pool[0]; + + trb_link = &dep->trb_pool[DWC3_TRB_NUM - 1]; + trb_link->bpl = lower_32_bits(dwc3_trb_dma_offset(dep, trb_st_hw)); + trb_link->bph = upper_32_bits(dwc3_trb_dma_offset(dep, trb_st_hw)); + trb_link->ctrl |= DWC3_TRBCTL_LINK_TRB; + trb_link->ctrl |= DWC3_TRB_CTRL_HWO; + } + + /* + * Issue StartTransfer here with no-op TRB so we can always rely on No + * Response Update Transfer command. + */ + if (usb_endpoint_xfer_bulk(desc) || + usb_endpoint_xfer_int(desc)) { + struct dwc3_gadget_ep_cmd_params params; + struct dwc3_trb *trb; + dma_addr_t trb_dma; + u32 cmd; + + memset(¶ms, 0, sizeof(params)); + trb = &dep->trb_pool[0]; + trb_dma = dwc3_trb_dma_offset(dep, trb); + + params.param0 = upper_32_bits(trb_dma); + params.param1 = lower_32_bits(trb_dma); + + cmd = DWC3_DEPCMD_STARTTRANSFER; + + ret = dwc3_send_gadget_ep_cmd(dep, cmd, ¶ms); + if (ret < 0) + return ret; + + if (dep->stream_capable) { + /* + * For streams, at start, there maybe a race where the + * host primes the endpoint before the function driver + * queues a request to initiate a stream. In that case, + * the controller will not see the prime to generate the + * ERDY and start stream. To workaround this, issue a + * no-op TRB as normal, but end it immediately. As a + * result, when the function driver queues the request, + * the next START_TRANSFER command will cause the + * controller to generate an ERDY to initiate the + * stream. + */ + dwc3_stop_active_transfer(dep, true, true); + + /* + * All stream eps will reinitiate stream on NoStream + * rejection until we can determine that the host can + * prime after the first transfer. + * + * However, if the controller is capable of + * TXF_FLUSH_BYPASS, then IN direction endpoints will + * automatically restart the stream without the driver + * initiation. + */ + if (!dep->direction || + !(dwc->hwparams.hwparams9 & + DWC3_GHWPARAMS9_DEV_TXF_FLUSH_BYPASS)) + dep->flags |= DWC3_EP_FORCE_RESTART_STREAM; + } + } + +out: + trace_dwc3_gadget_ep_enable(dep); + + return 0; +} + +void dwc3_remove_requests(struct dwc3 *dwc, struct dwc3_ep *dep, int status) +{ + struct dwc3_request *req; + + dwc3_stop_active_transfer(dep, true, false); + + /* If endxfer is delayed, avoid unmapping requests */ + if (dep->flags & DWC3_EP_DELAY_STOP) + return; + + /* - giveback all requests to gadget driver */ + while (!list_empty(&dep->started_list)) { + req = next_request(&dep->started_list); + + dwc3_gadget_giveback(dep, req, status); + } + + while (!list_empty(&dep->pending_list)) { + req = next_request(&dep->pending_list); + + dwc3_gadget_giveback(dep, req, status); + } + + while (!list_empty(&dep->cancelled_list)) { + req = next_request(&dep->cancelled_list); + + dwc3_gadget_giveback(dep, req, status); + } +} + +/** + * __dwc3_gadget_ep_disable - disables a hw endpoint + * @dep: the endpoint to disable + * + * This function undoes what __dwc3_gadget_ep_enable did and also removes + * requests which are currently being processed by the hardware and those which + * are not yet scheduled. + * + * Caller should take care of locking. + */ +static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep) +{ + struct dwc3 *dwc = dep->dwc; + u32 reg; + u32 mask; + + trace_dwc3_gadget_ep_disable(dep); + + /* make sure HW endpoint isn't stalled */ + if (dep->flags & DWC3_EP_STALL) + __dwc3_gadget_ep_set_halt(dep, 0, false); + + reg = dwc3_readl(dwc->regs, DWC3_DALEPENA); + reg &= ~DWC3_DALEPENA_EP(dep->number); + dwc3_writel(dwc->regs, DWC3_DALEPENA, reg); + + dwc3_remove_requests(dwc, dep, -ESHUTDOWN); + + dep->stream_capable = false; + dep->type = 0; + mask = DWC3_EP_TXFIFO_RESIZED; + /* + * dwc3_remove_requests() can exit early if DWC3 EP delayed stop is + * set. Do not clear DEP flags, so that the end transfer command will + * be reattempted during the next SETUP stage. + */ + if (dep->flags & DWC3_EP_DELAY_STOP) + mask |= (DWC3_EP_DELAY_STOP | DWC3_EP_TRANSFER_STARTED); + dep->flags &= mask; + + /* Clear out the ep descriptors for non-ep0 */ + if (dep->number > 1) { + dep->endpoint.comp_desc = NULL; + dep->endpoint.desc = NULL; + } + + return 0; +} + +/* -------------------------------------------------------------------------- */ + +static int dwc3_gadget_ep0_enable(struct usb_ep *ep, + const struct usb_endpoint_descriptor *desc) +{ + return -EINVAL; +} + +static int dwc3_gadget_ep0_disable(struct usb_ep *ep) +{ + return -EINVAL; +} + +/* -------------------------------------------------------------------------- */ + +static int dwc3_gadget_ep_enable(struct usb_ep *ep, + const struct usb_endpoint_descriptor *desc) +{ + struct dwc3_ep *dep; + struct dwc3 *dwc; + unsigned long flags; + int ret; + + if (!ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT) { + pr_debug("dwc3: invalid parameters\n"); + return -EINVAL; + } + + if (!desc->wMaxPacketSize) { + pr_debug("dwc3: missing wMaxPacketSize\n"); + return -EINVAL; + } + + dep = to_dwc3_ep(ep); + dwc = dep->dwc; + + if (dev_WARN_ONCE(dwc->dev, dep->flags & DWC3_EP_ENABLED, + "%s is already enabled\n", + dep->name)) + return 0; + + spin_lock_irqsave(&dwc->lock, flags); + ret = __dwc3_gadget_ep_enable(dep, DWC3_DEPCFG_ACTION_INIT); + spin_unlock_irqrestore(&dwc->lock, flags); + + return ret; +} + +static int dwc3_gadget_ep_disable(struct usb_ep *ep) +{ + struct dwc3_ep *dep; + struct dwc3 *dwc; + unsigned long flags; + int ret; + + if (!ep) { + pr_debug("dwc3: invalid parameters\n"); + return -EINVAL; + } + + dep = to_dwc3_ep(ep); + dwc = dep->dwc; + + if (dev_WARN_ONCE(dwc->dev, !(dep->flags & DWC3_EP_ENABLED), + "%s is already disabled\n", + dep->name)) + return 0; + + spin_lock_irqsave(&dwc->lock, flags); + ret = __dwc3_gadget_ep_disable(dep); + spin_unlock_irqrestore(&dwc->lock, flags); + + return ret; +} + +static struct usb_request *dwc3_gadget_ep_alloc_request(struct usb_ep *ep, + gfp_t gfp_flags) +{ + struct dwc3_request *req; + struct dwc3_ep *dep = to_dwc3_ep(ep); + + req = kzalloc(sizeof(*req), gfp_flags); + if (!req) + return NULL; + + req->direction = dep->direction; + req->epnum = dep->number; + req->dep = dep; + req->status = DWC3_REQUEST_STATUS_UNKNOWN; + + trace_dwc3_alloc_request(req); + + return &req->request; +} + +static void dwc3_gadget_ep_free_request(struct usb_ep *ep, + struct usb_request *request) +{ + struct dwc3_request *req = to_dwc3_request(request); + + trace_dwc3_free_request(req); + kfree(req); +} + +/** + * dwc3_ep_prev_trb - returns the previous TRB in the ring + * @dep: The endpoint with the TRB ring + * @index: The index of the current TRB in the ring + * + * Returns the TRB prior to the one pointed to by the index. If the + * index is 0, we will wrap backwards, skip the link TRB, and return + * the one just before that. + */ +static struct dwc3_trb *dwc3_ep_prev_trb(struct dwc3_ep *dep, u8 index) +{ + u8 tmp = index; + + if (!tmp) + tmp = DWC3_TRB_NUM - 1; + + return &dep->trb_pool[tmp - 1]; +} + +static u32 dwc3_calc_trbs_left(struct dwc3_ep *dep) +{ + u8 trbs_left; + + /* + * If the enqueue & dequeue are equal then the TRB ring is either full + * or empty. It's considered full when there are DWC3_TRB_NUM-1 of TRBs + * pending to be processed by the driver. + */ + if (dep->trb_enqueue == dep->trb_dequeue) { + /* + * If there is any request remained in the started_list at + * this point, that means there is no TRB available. + */ + if (!list_empty(&dep->started_list)) + return 0; + + return DWC3_TRB_NUM - 1; + } + + trbs_left = dep->trb_dequeue - dep->trb_enqueue; + trbs_left &= (DWC3_TRB_NUM - 1); + + if (dep->trb_dequeue < dep->trb_enqueue) + trbs_left--; + + return trbs_left; +} + +/** + * dwc3_prepare_one_trb - setup one TRB from one request + * @dep: endpoint for which this request is prepared + * @req: dwc3_request pointer + * @trb_length: buffer size of the TRB + * @chain: should this TRB be chained to the next? + * @node: only for isochronous endpoints. First TRB needs different type. + * @use_bounce_buffer: set to use bounce buffer + * @must_interrupt: set to interrupt on TRB completion + */ +static void dwc3_prepare_one_trb(struct dwc3_ep *dep, + struct dwc3_request *req, unsigned int trb_length, + unsigned int chain, unsigned int node, bool use_bounce_buffer, + bool must_interrupt) +{ + struct dwc3_trb *trb; + dma_addr_t dma; + unsigned int stream_id = req->request.stream_id; + unsigned int short_not_ok = req->request.short_not_ok; + unsigned int no_interrupt = req->request.no_interrupt; + unsigned int is_last = req->request.is_last; + struct dwc3 *dwc = dep->dwc; + struct usb_gadget *gadget = dwc->gadget; + enum usb_device_speed speed = gadget->speed; + + if (use_bounce_buffer) + dma = dep->dwc->bounce_addr; + else if (req->request.num_sgs > 0) + dma = sg_dma_address(req->start_sg); + else + dma = req->request.dma; + + trb = &dep->trb_pool[dep->trb_enqueue]; + + if (!req->trb) { + dwc3_gadget_move_started_request(req); + req->trb = trb; + req->trb_dma = dwc3_trb_dma_offset(dep, trb); + } + + req->num_trbs++; + + trb->size = DWC3_TRB_SIZE_LENGTH(trb_length); + trb->bpl = lower_32_bits(dma); + trb->bph = upper_32_bits(dma); + + switch (usb_endpoint_type(dep->endpoint.desc)) { + case USB_ENDPOINT_XFER_CONTROL: + trb->ctrl = DWC3_TRBCTL_CONTROL_SETUP; + break; + + case USB_ENDPOINT_XFER_ISOC: + if (!node) { + trb->ctrl = DWC3_TRBCTL_ISOCHRONOUS_FIRST; + + /* + * USB Specification 2.0 Section 5.9.2 states that: "If + * there is only a single transaction in the microframe, + * only a DATA0 data packet PID is used. If there are + * two transactions per microframe, DATA1 is used for + * the first transaction data packet and DATA0 is used + * for the second transaction data packet. If there are + * three transactions per microframe, DATA2 is used for + * the first transaction data packet, DATA1 is used for + * the second, and DATA0 is used for the third." + * + * IOW, we should satisfy the following cases: + * + * 1) length <= maxpacket + * - DATA0 + * + * 2) maxpacket < length <= (2 * maxpacket) + * - DATA1, DATA0 + * + * 3) (2 * maxpacket) < length <= (3 * maxpacket) + * - DATA2, DATA1, DATA0 + */ + if (speed == USB_SPEED_HIGH) { + struct usb_ep *ep = &dep->endpoint; + unsigned int mult = 2; + unsigned int maxp = usb_endpoint_maxp(ep->desc); + + if (req->request.length <= (2 * maxp)) + mult--; + + if (req->request.length <= maxp) + mult--; + + trb->size |= DWC3_TRB_SIZE_PCM1(mult); + } + } else { + trb->ctrl = DWC3_TRBCTL_ISOCHRONOUS; + } + + if (!no_interrupt && !chain) + trb->ctrl |= DWC3_TRB_CTRL_ISP_IMI; + break; + + case USB_ENDPOINT_XFER_BULK: + case USB_ENDPOINT_XFER_INT: + trb->ctrl = DWC3_TRBCTL_NORMAL; + break; + default: + /* + * This is only possible with faulty memory because we + * checked it already :) + */ + dev_WARN(dwc->dev, "Unknown endpoint type %d\n", + usb_endpoint_type(dep->endpoint.desc)); + } + + /* + * Enable Continue on Short Packet + * when endpoint is not a stream capable + */ + if (usb_endpoint_dir_out(dep->endpoint.desc)) { + if (!dep->stream_capable) + trb->ctrl |= DWC3_TRB_CTRL_CSP; + + if (short_not_ok) + trb->ctrl |= DWC3_TRB_CTRL_ISP_IMI; + } + + /* All TRBs setup for MST must set CSP=1 when LST=0 */ + if (dep->stream_capable && DWC3_MST_CAPABLE(&dwc->hwparams)) + trb->ctrl |= DWC3_TRB_CTRL_CSP; + + if ((!no_interrupt && !chain) || must_interrupt) + trb->ctrl |= DWC3_TRB_CTRL_IOC; + + if (chain) + trb->ctrl |= DWC3_TRB_CTRL_CHN; + else if (dep->stream_capable && is_last && + !DWC3_MST_CAPABLE(&dwc->hwparams)) + trb->ctrl |= DWC3_TRB_CTRL_LST; + + if (usb_endpoint_xfer_bulk(dep->endpoint.desc) && dep->stream_capable) + trb->ctrl |= DWC3_TRB_CTRL_SID_SOFN(stream_id); + + /* + * As per data book 4.2.3.2TRB Control Bit Rules section + * + * The controller autonomously checks the HWO field of a TRB to determine if the + * entire TRB is valid. Therefore, software must ensure that the rest of the TRB + * is valid before setting the HWO field to '1'. In most systems, this means that + * software must update the fourth DWORD of a TRB last. + * + * However there is a possibility of CPU re-ordering here which can cause + * controller to observe the HWO bit set prematurely. + * Add a write memory barrier to prevent CPU re-ordering. + */ + wmb(); + trb->ctrl |= DWC3_TRB_CTRL_HWO; + + dwc3_ep_inc_enq(dep); + + trace_dwc3_prepare_trb(dep, trb); +} + +static bool dwc3_needs_extra_trb(struct dwc3_ep *dep, struct dwc3_request *req) +{ + unsigned int maxp = usb_endpoint_maxp(dep->endpoint.desc); + unsigned int rem = req->request.length % maxp; + + if ((req->request.length && req->request.zero && !rem && + !usb_endpoint_xfer_isoc(dep->endpoint.desc)) || + (!req->direction && rem)) + return true; + + return false; +} + +/** + * dwc3_prepare_last_sg - prepare TRBs for the last SG entry + * @dep: The endpoint that the request belongs to + * @req: The request to prepare + * @entry_length: The last SG entry size + * @node: Indicates whether this is not the first entry (for isoc only) + * + * Return the number of TRBs prepared. + */ +static int dwc3_prepare_last_sg(struct dwc3_ep *dep, + struct dwc3_request *req, unsigned int entry_length, + unsigned int node) +{ + unsigned int maxp = usb_endpoint_maxp(dep->endpoint.desc); + unsigned int rem = req->request.length % maxp; + unsigned int num_trbs = 1; + + if (dwc3_needs_extra_trb(dep, req)) + num_trbs++; + + if (dwc3_calc_trbs_left(dep) < num_trbs) + return 0; + + req->needs_extra_trb = num_trbs > 1; + + /* Prepare a normal TRB */ + if (req->direction || req->request.length) + dwc3_prepare_one_trb(dep, req, entry_length, + req->needs_extra_trb, node, false, false); + + /* Prepare extra TRBs for ZLP and MPS OUT transfer alignment */ + if ((!req->direction && !req->request.length) || req->needs_extra_trb) + dwc3_prepare_one_trb(dep, req, + req->direction ? 0 : maxp - rem, + false, 1, true, false); + + return num_trbs; +} + +static int dwc3_prepare_trbs_sg(struct dwc3_ep *dep, + struct dwc3_request *req) +{ + struct scatterlist *sg = req->start_sg; + struct scatterlist *s; + int i; + unsigned int length = req->request.length; + unsigned int remaining = req->request.num_mapped_sgs + - req->num_queued_sgs; + unsigned int num_trbs = req->num_trbs; + bool needs_extra_trb = dwc3_needs_extra_trb(dep, req); + + /* + * If we resume preparing the request, then get the remaining length of + * the request and resume where we left off. + */ + for_each_sg(req->request.sg, s, req->num_queued_sgs, i) + length -= sg_dma_len(s); + + for_each_sg(sg, s, remaining, i) { + unsigned int num_trbs_left = dwc3_calc_trbs_left(dep); + unsigned int trb_length; + bool must_interrupt = false; + bool last_sg = false; + + trb_length = min_t(unsigned int, length, sg_dma_len(s)); + + length -= trb_length; + + /* + * IOMMU driver is coalescing the list of sgs which shares a + * page boundary into one and giving it to USB driver. With + * this the number of sgs mapped is not equal to the number of + * sgs passed. So mark the chain bit to false if it isthe last + * mapped sg. + */ + if ((i == remaining - 1) || !length) + last_sg = true; + + if (!num_trbs_left) + break; + + if (last_sg) { + if (!dwc3_prepare_last_sg(dep, req, trb_length, i)) + break; + } else { + /* + * Look ahead to check if we have enough TRBs for the + * next SG entry. If not, set interrupt on this TRB to + * resume preparing the next SG entry when more TRBs are + * free. + */ + if (num_trbs_left == 1 || (needs_extra_trb && + num_trbs_left <= 2 && + sg_dma_len(sg_next(s)) >= length)) + must_interrupt = true; + + dwc3_prepare_one_trb(dep, req, trb_length, 1, i, false, + must_interrupt); + } + + /* + * There can be a situation where all sgs in sglist are not + * queued because of insufficient trb number. To handle this + * case, update start_sg to next sg to be queued, so that + * we have free trbs we can continue queuing from where we + * previously stopped + */ + if (!last_sg) + req->start_sg = sg_next(s); + + req->num_queued_sgs++; + req->num_pending_sgs--; + + /* + * The number of pending SG entries may not correspond to the + * number of mapped SG entries. If all the data are queued, then + * don't include unused SG entries. + */ + if (length == 0) { + req->num_pending_sgs = 0; + break; + } + + if (must_interrupt) + break; + } + + return req->num_trbs - num_trbs; +} + +static int dwc3_prepare_trbs_linear(struct dwc3_ep *dep, + struct dwc3_request *req) +{ + return dwc3_prepare_last_sg(dep, req, req->request.length, 0); +} + +/* + * dwc3_prepare_trbs - setup TRBs from requests + * @dep: endpoint for which requests are being prepared + * + * The function goes through the requests list and sets up TRBs for the + * transfers. The function returns once there are no more TRBs available or + * it runs out of requests. + * + * Returns the number of TRBs prepared or negative errno. + */ +static int dwc3_prepare_trbs(struct dwc3_ep *dep) +{ + struct dwc3_request *req, *n; + int ret = 0; + + BUILD_BUG_ON_NOT_POWER_OF_2(DWC3_TRB_NUM); + + /* + * We can get in a situation where there's a request in the started list + * but there weren't enough TRBs to fully kick it in the first time + * around, so it has been waiting for more TRBs to be freed up. + * + * In that case, we should check if we have a request with pending_sgs + * in the started list and prepare TRBs for that request first, + * otherwise we will prepare TRBs completely out of order and that will + * break things. + */ + list_for_each_entry(req, &dep->started_list, list) { + if (req->num_pending_sgs > 0) { + ret = dwc3_prepare_trbs_sg(dep, req); + if (!ret || req->num_pending_sgs) + return ret; + } + + if (!dwc3_calc_trbs_left(dep)) + return ret; + + /* + * Don't prepare beyond a transfer. In DWC_usb32, its transfer + * burst capability may try to read and use TRBs beyond the + * active transfer instead of stopping. + */ + if (dep->stream_capable && req->request.is_last && + !DWC3_MST_CAPABLE(&dep->dwc->hwparams)) + return ret; + } + + list_for_each_entry_safe(req, n, &dep->pending_list, list) { + struct dwc3 *dwc = dep->dwc; + + ret = usb_gadget_map_request_by_dev(dwc->sysdev, &req->request, + dep->direction); + if (ret) + return ret; + + req->sg = req->request.sg; + req->start_sg = req->sg; + req->num_queued_sgs = 0; + req->num_pending_sgs = req->request.num_mapped_sgs; + + if (req->num_pending_sgs > 0) { + ret = dwc3_prepare_trbs_sg(dep, req); + if (req->num_pending_sgs) + return ret; + } else { + ret = dwc3_prepare_trbs_linear(dep, req); + } + + if (!ret || !dwc3_calc_trbs_left(dep)) + return ret; + + /* + * Don't prepare beyond a transfer. In DWC_usb32, its transfer + * burst capability may try to read and use TRBs beyond the + * active transfer instead of stopping. + */ + if (dep->stream_capable && req->request.is_last && + !DWC3_MST_CAPABLE(&dwc->hwparams)) + return ret; + } + + return ret; +} + +static void dwc3_gadget_ep_cleanup_cancelled_requests(struct dwc3_ep *dep); + +static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep) +{ + struct dwc3_gadget_ep_cmd_params params; + struct dwc3_request *req; + int starting; + int ret; + u32 cmd; + + /* + * Note that it's normal to have no new TRBs prepared (i.e. ret == 0). + * This happens when we need to stop and restart a transfer such as in + * the case of reinitiating a stream or retrying an isoc transfer. + */ + ret = dwc3_prepare_trbs(dep); + if (ret < 0) + return ret; + + starting = !(dep->flags & DWC3_EP_TRANSFER_STARTED); + + /* + * If there's no new TRB prepared and we don't need to restart a + * transfer, there's no need to update the transfer. + */ + if (!ret && !starting) + return ret; + + req = next_request(&dep->started_list); + if (!req) { + dep->flags |= DWC3_EP_PENDING_REQUEST; + return 0; + } + + memset(¶ms, 0, sizeof(params)); + + if (starting) { + params.param0 = upper_32_bits(req->trb_dma); + params.param1 = lower_32_bits(req->trb_dma); + cmd = DWC3_DEPCMD_STARTTRANSFER; + + if (dep->stream_capable) + cmd |= DWC3_DEPCMD_PARAM(req->request.stream_id); + + if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) + cmd |= DWC3_DEPCMD_PARAM(dep->frame_number); + } else { + cmd = DWC3_DEPCMD_UPDATETRANSFER | + DWC3_DEPCMD_PARAM(dep->resource_index); + } + + ret = dwc3_send_gadget_ep_cmd(dep, cmd, ¶ms); + if (ret < 0) { + struct dwc3_request *tmp; + + if (ret == -EAGAIN) + return ret; + + dwc3_stop_active_transfer(dep, true, true); + + list_for_each_entry_safe(req, tmp, &dep->started_list, list) + dwc3_gadget_move_cancelled_request(req, DWC3_REQUEST_STATUS_DEQUEUED); + + /* If ep isn't started, then there's no end transfer pending */ + if (!(dep->flags & DWC3_EP_END_TRANSFER_PENDING)) + dwc3_gadget_ep_cleanup_cancelled_requests(dep); + + return ret; + } + + if (dep->stream_capable && req->request.is_last && + !DWC3_MST_CAPABLE(&dep->dwc->hwparams)) + dep->flags |= DWC3_EP_WAIT_TRANSFER_COMPLETE; + + return 0; +} + +static int __dwc3_gadget_get_frame(struct dwc3 *dwc) +{ + u32 reg; + + reg = dwc3_readl(dwc->regs, DWC3_DSTS); + return DWC3_DSTS_SOFFN(reg); +} + +/** + * __dwc3_stop_active_transfer - stop the current active transfer + * @dep: isoc endpoint + * @force: set forcerm bit in the command + * @interrupt: command complete interrupt after End Transfer command + * + * When setting force, the ForceRM bit will be set. In that case + * the controller won't update the TRB progress on command + * completion. It also won't clear the HWO bit in the TRB. + * The command will also not complete immediately in that case. + */ +static int __dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force, bool interrupt) +{ + struct dwc3 *dwc = dep->dwc; + struct dwc3_gadget_ep_cmd_params params; + u32 cmd; + int ret; + + cmd = DWC3_DEPCMD_ENDTRANSFER; + cmd |= force ? DWC3_DEPCMD_HIPRI_FORCERM : 0; + cmd |= interrupt ? DWC3_DEPCMD_CMDIOC : 0; + cmd |= DWC3_DEPCMD_PARAM(dep->resource_index); + memset(¶ms, 0, sizeof(params)); + ret = dwc3_send_gadget_ep_cmd(dep, cmd, ¶ms); + /* + * If the End Transfer command was timed out while the device is + * not in SETUP phase, it's possible that an incoming Setup packet + * may prevent the command's completion. Let's retry when the + * ep0state returns to EP0_SETUP_PHASE. + */ + if (ret == -ETIMEDOUT && dep->dwc->ep0state != EP0_SETUP_PHASE) { + dep->flags |= DWC3_EP_DELAY_STOP; + return 0; + } + WARN_ON_ONCE(ret); + dep->resource_index = 0; + + if (!interrupt) { + if (!DWC3_IP_IS(DWC3) || DWC3_VER_IS_PRIOR(DWC3, 310A)) + mdelay(1); + dep->flags &= ~DWC3_EP_TRANSFER_STARTED; + } else if (!ret) { + dep->flags |= DWC3_EP_END_TRANSFER_PENDING; + } + + dep->flags &= ~DWC3_EP_DELAY_STOP; + return ret; +} + +/** + * dwc3_gadget_start_isoc_quirk - workaround invalid frame number + * @dep: isoc endpoint + * + * This function tests for the correct combination of BIT[15:14] from the 16-bit + * microframe number reported by the XferNotReady event for the future frame + * number to start the isoc transfer. + * + * In DWC_usb31 version 1.70a-ea06 and prior, for highspeed and fullspeed + * isochronous IN, BIT[15:14] of the 16-bit microframe number reported by the + * XferNotReady event are invalid. The driver uses this number to schedule the + * isochronous transfer and passes it to the START TRANSFER command. Because + * this number is invalid, the command may fail. If BIT[15:14] matches the + * internal 16-bit microframe, the START TRANSFER command will pass and the + * transfer will start at the scheduled time, if it is off by 1, the command + * will still pass, but the transfer will start 2 seconds in the future. For all + * other conditions, the START TRANSFER command will fail with bus-expiry. + * + * In order to workaround this issue, we can test for the correct combination of + * BIT[15:14] by sending START TRANSFER commands with different values of + * BIT[15:14]: 'b00, 'b01, 'b10, and 'b11. Each combination is 2^14 uframe apart + * (or 2 seconds). 4 seconds into the future will result in a bus-expiry status. + * As the result, within the 4 possible combinations for BIT[15:14], there will + * be 2 successful and 2 failure START COMMAND status. One of the 2 successful + * command status will result in a 2-second delay start. The smaller BIT[15:14] + * value is the correct combination. + * + * Since there are only 4 outcomes and the results are ordered, we can simply + * test 2 START TRANSFER commands with BIT[15:14] combinations 'b00 and 'b01 to + * deduce the smaller successful combination. + * + * Let test0 = test status for combination 'b00 and test1 = test status for 'b01 + * of BIT[15:14]. The correct combination is as follow: + * + * if test0 fails and test1 passes, BIT[15:14] is 'b01 + * if test0 fails and test1 fails, BIT[15:14] is 'b10 + * if test0 passes and test1 fails, BIT[15:14] is 'b11 + * if test0 passes and test1 passes, BIT[15:14] is 'b00 + * + * Synopsys STAR 9001202023: Wrong microframe number for isochronous IN + * endpoints. + */ +static int dwc3_gadget_start_isoc_quirk(struct dwc3_ep *dep) +{ + int cmd_status = 0; + bool test0; + bool test1; + + while (dep->combo_num < 2) { + struct dwc3_gadget_ep_cmd_params params; + u32 test_frame_number; + u32 cmd; + + /* + * Check if we can start isoc transfer on the next interval or + * 4 uframes in the future with BIT[15:14] as dep->combo_num + */ + test_frame_number = dep->frame_number & DWC3_FRNUMBER_MASK; + test_frame_number |= dep->combo_num << 14; + test_frame_number += max_t(u32, 4, dep->interval); + + params.param0 = upper_32_bits(dep->dwc->bounce_addr); + params.param1 = lower_32_bits(dep->dwc->bounce_addr); + + cmd = DWC3_DEPCMD_STARTTRANSFER; + cmd |= DWC3_DEPCMD_PARAM(test_frame_number); + cmd_status = dwc3_send_gadget_ep_cmd(dep, cmd, ¶ms); + + /* Redo if some other failure beside bus-expiry is received */ + if (cmd_status && cmd_status != -EAGAIN) { + dep->start_cmd_status = 0; + dep->combo_num = 0; + return 0; + } + + /* Store the first test status */ + if (dep->combo_num == 0) + dep->start_cmd_status = cmd_status; + + dep->combo_num++; + + /* + * End the transfer if the START_TRANSFER command is successful + * to wait for the next XferNotReady to test the command again + */ + if (cmd_status == 0) { + dwc3_stop_active_transfer(dep, true, true); + return 0; + } + } + + /* test0 and test1 are both completed at this point */ + test0 = (dep->start_cmd_status == 0); + test1 = (cmd_status == 0); + + if (!test0 && test1) + dep->combo_num = 1; + else if (!test0 && !test1) + dep->combo_num = 2; + else if (test0 && !test1) + dep->combo_num = 3; + else if (test0 && test1) + dep->combo_num = 0; + + dep->frame_number &= DWC3_FRNUMBER_MASK; + dep->frame_number |= dep->combo_num << 14; + dep->frame_number += max_t(u32, 4, dep->interval); + + /* Reinitialize test variables */ + dep->start_cmd_status = 0; + dep->combo_num = 0; + + return __dwc3_gadget_kick_transfer(dep); +} + +static int __dwc3_gadget_start_isoc(struct dwc3_ep *dep) +{ + const struct usb_endpoint_descriptor *desc = dep->endpoint.desc; + struct dwc3 *dwc = dep->dwc; + int ret; + int i; + + if (list_empty(&dep->pending_list) && + list_empty(&dep->started_list)) { + dep->flags |= DWC3_EP_PENDING_REQUEST; + return -EAGAIN; + } + + if (!dwc->dis_start_transfer_quirk && + (DWC3_VER_IS_PRIOR(DWC31, 170A) || + DWC3_VER_TYPE_IS_WITHIN(DWC31, 170A, EA01, EA06))) { + if (dwc->gadget->speed <= USB_SPEED_HIGH && dep->direction) + return dwc3_gadget_start_isoc_quirk(dep); + } + + if (desc->bInterval <= 14 && + dwc->gadget->speed >= USB_SPEED_HIGH) { + u32 frame = __dwc3_gadget_get_frame(dwc); + bool rollover = frame < + (dep->frame_number & DWC3_FRNUMBER_MASK); + + /* + * frame_number is set from XferNotReady and may be already + * out of date. DSTS only provides the lower 14 bit of the + * current frame number. So add the upper two bits of + * frame_number and handle a possible rollover. + * This will provide the correct frame_number unless more than + * rollover has happened since XferNotReady. + */ + + dep->frame_number = (dep->frame_number & ~DWC3_FRNUMBER_MASK) | + frame; + if (rollover) + dep->frame_number += BIT(14); + } + + for (i = 0; i < DWC3_ISOC_MAX_RETRIES; i++) { + int future_interval = i + 1; + + /* Give the controller at least 500us to schedule transfers */ + if (desc->bInterval < 3) + future_interval += 3 - desc->bInterval; + + dep->frame_number = DWC3_ALIGN_FRAME(dep, future_interval); + + ret = __dwc3_gadget_kick_transfer(dep); + if (ret != -EAGAIN) + break; + } + + /* + * After a number of unsuccessful start attempts due to bus-expiry + * status, issue END_TRANSFER command and retry on the next XferNotReady + * event. + */ + if (ret == -EAGAIN) + ret = __dwc3_stop_active_transfer(dep, false, true); + + return ret; +} + +static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req) +{ + struct dwc3 *dwc = dep->dwc; + + if (!dep->endpoint.desc || !dwc->pullups_connected || !dwc->connected) { + dev_dbg(dwc->dev, "%s: can't queue to disabled endpoint\n", + dep->name); + return -ESHUTDOWN; + } + + if (WARN(req->dep != dep, "request %pK belongs to '%s'\n", + &req->request, req->dep->name)) + return -EINVAL; + + if (WARN(req->status < DWC3_REQUEST_STATUS_COMPLETED, + "%s: request %pK already in flight\n", + dep->name, &req->request)) + return -EINVAL; + + pm_runtime_get(dwc->dev); + + req->request.actual = 0; + req->request.status = -EINPROGRESS; + + trace_dwc3_ep_queue(req); + + list_add_tail(&req->list, &dep->pending_list); + req->status = DWC3_REQUEST_STATUS_QUEUED; + + if (dep->flags & DWC3_EP_WAIT_TRANSFER_COMPLETE) + return 0; + + /* + * Start the transfer only after the END_TRANSFER is completed + * and endpoint STALL is cleared. + */ + if ((dep->flags & DWC3_EP_END_TRANSFER_PENDING) || + (dep->flags & DWC3_EP_WEDGE) || + (dep->flags & DWC3_EP_DELAY_STOP) || + (dep->flags & DWC3_EP_STALL)) { + dep->flags |= DWC3_EP_DELAY_START; + return 0; + } + + /* + * NOTICE: Isochronous endpoints should NEVER be prestarted. We must + * wait for a XferNotReady event so we will know what's the current + * (micro-)frame number. + * + * Without this trick, we are very, very likely gonna get Bus Expiry + * errors which will force us issue EndTransfer command. + */ + if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) { + if (!(dep->flags & DWC3_EP_TRANSFER_STARTED)) { + if ((dep->flags & DWC3_EP_PENDING_REQUEST)) + return __dwc3_gadget_start_isoc(dep); + + return 0; + } + } + + __dwc3_gadget_kick_transfer(dep); + + return 0; +} + +static int dwc3_gadget_ep_queue(struct usb_ep *ep, struct usb_request *request, + gfp_t gfp_flags) +{ + struct dwc3_request *req = to_dwc3_request(request); + struct dwc3_ep *dep = to_dwc3_ep(ep); + struct dwc3 *dwc = dep->dwc; + + unsigned long flags; + + int ret; + + spin_lock_irqsave(&dwc->lock, flags); + ret = __dwc3_gadget_ep_queue(dep, req); + spin_unlock_irqrestore(&dwc->lock, flags); + + return ret; +} + +static void dwc3_gadget_ep_skip_trbs(struct dwc3_ep *dep, struct dwc3_request *req) +{ + int i; + + /* If req->trb is not set, then the request has not started */ + if (!req->trb) + return; + + /* + * If request was already started, this means we had to + * stop the transfer. With that we also need to ignore + * all TRBs used by the request, however TRBs can only + * be modified after completion of END_TRANSFER + * command. So what we do here is that we wait for + * END_TRANSFER completion and only after that, we jump + * over TRBs by clearing HWO and incrementing dequeue + * pointer. + */ + for (i = 0; i < req->num_trbs; i++) { + struct dwc3_trb *trb; + + trb = &dep->trb_pool[dep->trb_dequeue]; + trb->ctrl &= ~DWC3_TRB_CTRL_HWO; + dwc3_ep_inc_deq(dep); + } + + req->num_trbs = 0; +} + +static void dwc3_gadget_ep_cleanup_cancelled_requests(struct dwc3_ep *dep) +{ + struct dwc3_request *req; + struct dwc3 *dwc = dep->dwc; + + while (!list_empty(&dep->cancelled_list)) { + req = next_request(&dep->cancelled_list); + dwc3_gadget_ep_skip_trbs(dep, req); + switch (req->status) { + case DWC3_REQUEST_STATUS_DISCONNECTED: + dwc3_gadget_giveback(dep, req, -ESHUTDOWN); + break; + case DWC3_REQUEST_STATUS_DEQUEUED: + dwc3_gadget_giveback(dep, req, -ECONNRESET); + break; + case DWC3_REQUEST_STATUS_STALLED: + dwc3_gadget_giveback(dep, req, -EPIPE); + break; + default: + dev_err(dwc->dev, "request cancelled with wrong reason:%d\n", req->status); + dwc3_gadget_giveback(dep, req, -ECONNRESET); + break; + } + /* + * The endpoint is disabled, let the dwc3_remove_requests() + * handle the cleanup. + */ + if (!dep->endpoint.desc) + break; + } +} + +static int dwc3_gadget_ep_dequeue(struct usb_ep *ep, + struct usb_request *request) +{ + struct dwc3_request *req = to_dwc3_request(request); + struct dwc3_request *r = NULL; + + struct dwc3_ep *dep = to_dwc3_ep(ep); + struct dwc3 *dwc = dep->dwc; + + unsigned long flags; + int ret = 0; + + trace_dwc3_ep_dequeue(req); + + spin_lock_irqsave(&dwc->lock, flags); + + list_for_each_entry(r, &dep->cancelled_list, list) { + if (r == req) + goto out; + } + + list_for_each_entry(r, &dep->pending_list, list) { + if (r == req) { + /* + * Explicitly check for EP0/1 as dequeue for those + * EPs need to be handled differently. Control EP + * only deals with one USB req, and giveback will + * occur during dwc3_ep0_stall_and_restart(). EP0 + * requests are never added to started_list. + */ + if (dep->number > 1) + dwc3_gadget_giveback(dep, req, -ECONNRESET); + else + dwc3_ep0_reset_state(dwc); + goto out; + } + } + + list_for_each_entry(r, &dep->started_list, list) { + if (r == req) { + struct dwc3_request *t; + + /* wait until it is processed */ + dwc3_stop_active_transfer(dep, true, true); + + /* + * Remove any started request if the transfer is + * cancelled. + */ + list_for_each_entry_safe(r, t, &dep->started_list, list) + dwc3_gadget_move_cancelled_request(r, + DWC3_REQUEST_STATUS_DEQUEUED); + + dep->flags &= ~DWC3_EP_WAIT_TRANSFER_COMPLETE; + + goto out; + } + } + + dev_err(dwc->dev, "request %pK was not queued to %s\n", + request, ep->name); + ret = -EINVAL; +out: + spin_unlock_irqrestore(&dwc->lock, flags); + + return ret; +} + +int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol) +{ + struct dwc3_gadget_ep_cmd_params params; + struct dwc3 *dwc = dep->dwc; + struct dwc3_request *req; + struct dwc3_request *tmp; + int ret; + + if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) { + dev_err(dwc->dev, "%s is of Isochronous type\n", dep->name); + return -EINVAL; + } + + memset(¶ms, 0x00, sizeof(params)); + + if (value) { + struct dwc3_trb *trb; + + unsigned int transfer_in_flight; + unsigned int started; + + if (dep->number > 1) + trb = dwc3_ep_prev_trb(dep, dep->trb_enqueue); + else + trb = &dwc->ep0_trb[dep->trb_enqueue]; + + transfer_in_flight = trb->ctrl & DWC3_TRB_CTRL_HWO; + started = !list_empty(&dep->started_list); + + if (!protocol && ((dep->direction && transfer_in_flight) || + (!dep->direction && started))) { + return -EAGAIN; + } + + ret = dwc3_send_gadget_ep_cmd(dep, DWC3_DEPCMD_SETSTALL, + ¶ms); + if (ret) + dev_err(dwc->dev, "failed to set STALL on %s\n", + dep->name); + else + dep->flags |= DWC3_EP_STALL; + } else { + /* + * Don't issue CLEAR_STALL command to control endpoints. The + * controller automatically clears the STALL when it receives + * the SETUP token. + */ + if (dep->number <= 1) { + dep->flags &= ~(DWC3_EP_STALL | DWC3_EP_WEDGE); + return 0; + } + + dwc3_stop_active_transfer(dep, true, true); + + list_for_each_entry_safe(req, tmp, &dep->started_list, list) + dwc3_gadget_move_cancelled_request(req, DWC3_REQUEST_STATUS_STALLED); + + if (dep->flags & DWC3_EP_END_TRANSFER_PENDING || + (dep->flags & DWC3_EP_DELAY_STOP)) { + dep->flags |= DWC3_EP_PENDING_CLEAR_STALL; + if (protocol) + dwc->clear_stall_protocol = dep->number; + + return 0; + } + + dwc3_gadget_ep_cleanup_cancelled_requests(dep); + + ret = dwc3_send_clear_stall_ep_cmd(dep); + if (ret) { + dev_err(dwc->dev, "failed to clear STALL on %s\n", + dep->name); + return ret; + } + + dep->flags &= ~(DWC3_EP_STALL | DWC3_EP_WEDGE); + + if ((dep->flags & DWC3_EP_DELAY_START) && + !usb_endpoint_xfer_isoc(dep->endpoint.desc)) + __dwc3_gadget_kick_transfer(dep); + + dep->flags &= ~DWC3_EP_DELAY_START; + } + + return ret; +} + +static int dwc3_gadget_ep_set_halt(struct usb_ep *ep, int value) +{ + struct dwc3_ep *dep = to_dwc3_ep(ep); + struct dwc3 *dwc = dep->dwc; + + unsigned long flags; + + int ret; + + spin_lock_irqsave(&dwc->lock, flags); + ret = __dwc3_gadget_ep_set_halt(dep, value, false); + spin_unlock_irqrestore(&dwc->lock, flags); + + return ret; +} + +static int dwc3_gadget_ep_set_wedge(struct usb_ep *ep) +{ + struct dwc3_ep *dep = to_dwc3_ep(ep); + struct dwc3 *dwc = dep->dwc; + unsigned long flags; + int ret; + + spin_lock_irqsave(&dwc->lock, flags); + dep->flags |= DWC3_EP_WEDGE; + + if (dep->number == 0 || dep->number == 1) + ret = __dwc3_gadget_ep0_set_halt(ep, 1); + else + ret = __dwc3_gadget_ep_set_halt(dep, 1, false); + spin_unlock_irqrestore(&dwc->lock, flags); + + return ret; +} + +/* -------------------------------------------------------------------------- */ + +static struct usb_endpoint_descriptor dwc3_gadget_ep0_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bmAttributes = USB_ENDPOINT_XFER_CONTROL, +}; + +static const struct usb_ep_ops dwc3_gadget_ep0_ops = { + .enable = dwc3_gadget_ep0_enable, + .disable = dwc3_gadget_ep0_disable, + .alloc_request = dwc3_gadget_ep_alloc_request, + .free_request = dwc3_gadget_ep_free_request, + .queue = dwc3_gadget_ep0_queue, + .dequeue = dwc3_gadget_ep_dequeue, + .set_halt = dwc3_gadget_ep0_set_halt, + .set_wedge = dwc3_gadget_ep_set_wedge, +}; + +static const struct usb_ep_ops dwc3_gadget_ep_ops = { + .enable = dwc3_gadget_ep_enable, + .disable = dwc3_gadget_ep_disable, + .alloc_request = dwc3_gadget_ep_alloc_request, + .free_request = dwc3_gadget_ep_free_request, + .queue = dwc3_gadget_ep_queue, + .dequeue = dwc3_gadget_ep_dequeue, + .set_halt = dwc3_gadget_ep_set_halt, + .set_wedge = dwc3_gadget_ep_set_wedge, +}; + +/* -------------------------------------------------------------------------- */ + +static int dwc3_gadget_get_frame(struct usb_gadget *g) +{ + struct dwc3 *dwc = gadget_to_dwc(g); + + return __dwc3_gadget_get_frame(dwc); +} + +static int __dwc3_gadget_wakeup(struct dwc3 *dwc) +{ + int retries; + + int ret; + u32 reg; + + u8 link_state; + + /* + * According to the Databook Remote wakeup request should + * be issued only when the device is in early suspend state. + * + * We can check that via USB Link State bits in DSTS register. + */ + reg = dwc3_readl(dwc->regs, DWC3_DSTS); + + link_state = DWC3_DSTS_USBLNKST(reg); + + switch (link_state) { + case DWC3_LINK_STATE_RESET: + case DWC3_LINK_STATE_RX_DET: /* in HS, means Early Suspend */ + case DWC3_LINK_STATE_U3: /* in HS, means SUSPEND */ + case DWC3_LINK_STATE_U2: /* in HS, means Sleep (L1) */ + case DWC3_LINK_STATE_U1: + case DWC3_LINK_STATE_RESUME: + break; + default: + return -EINVAL; + } + + ret = dwc3_gadget_set_link_state(dwc, DWC3_LINK_STATE_RECOV); + if (ret < 0) { + dev_err(dwc->dev, "failed to put link in Recovery\n"); + return ret; + } + + /* Recent versions do this automatically */ + if (DWC3_VER_IS_PRIOR(DWC3, 194A)) { + /* write zeroes to Link Change Request */ + reg = dwc3_readl(dwc->regs, DWC3_DCTL); + reg &= ~DWC3_DCTL_ULSTCHNGREQ_MASK; + dwc3_writel(dwc->regs, DWC3_DCTL, reg); + } + + /* poll until Link State changes to ON */ + retries = 20000; + + while (retries--) { + reg = dwc3_readl(dwc->regs, DWC3_DSTS); + + /* in HS, means ON */ + if (DWC3_DSTS_USBLNKST(reg) == DWC3_LINK_STATE_U0) + break; + } + + if (DWC3_DSTS_USBLNKST(reg) != DWC3_LINK_STATE_U0) { + dev_err(dwc->dev, "failed to send remote wakeup\n"); + return -EINVAL; + } + + return 0; +} + +static int dwc3_gadget_wakeup(struct usb_gadget *g) +{ + struct dwc3 *dwc = gadget_to_dwc(g); + unsigned long flags; + int ret; + + spin_lock_irqsave(&dwc->lock, flags); + ret = __dwc3_gadget_wakeup(dwc); + spin_unlock_irqrestore(&dwc->lock, flags); + + return ret; +} + +static int dwc3_gadget_set_selfpowered(struct usb_gadget *g, + int is_selfpowered) +{ + struct dwc3 *dwc = gadget_to_dwc(g); + unsigned long flags; + + spin_lock_irqsave(&dwc->lock, flags); + g->is_selfpowered = !!is_selfpowered; + spin_unlock_irqrestore(&dwc->lock, flags); + + return 0; +} + +static void dwc3_stop_active_transfers(struct dwc3 *dwc) +{ + u32 epnum; + + for (epnum = 2; epnum < dwc->num_eps; epnum++) { + struct dwc3_ep *dep; + + dep = dwc->eps[epnum]; + if (!dep) + continue; + + dwc3_remove_requests(dwc, dep, -ESHUTDOWN); + } +} + +static void __dwc3_gadget_set_ssp_rate(struct dwc3 *dwc) +{ + enum usb_ssp_rate ssp_rate = dwc->gadget_ssp_rate; + u32 reg; + + if (ssp_rate == USB_SSP_GEN_UNKNOWN) + ssp_rate = dwc->max_ssp_rate; + + reg = dwc3_readl(dwc->regs, DWC3_DCFG); + reg &= ~DWC3_DCFG_SPEED_MASK; + reg &= ~DWC3_DCFG_NUMLANES(~0); + + if (ssp_rate == USB_SSP_GEN_1x2) + reg |= DWC3_DCFG_SUPERSPEED; + else if (dwc->max_ssp_rate != USB_SSP_GEN_1x2) + reg |= DWC3_DCFG_SUPERSPEED_PLUS; + + if (ssp_rate != USB_SSP_GEN_2x1 && + dwc->max_ssp_rate != USB_SSP_GEN_2x1) + reg |= DWC3_DCFG_NUMLANES(1); + + dwc3_writel(dwc->regs, DWC3_DCFG, reg); +} + +static void __dwc3_gadget_set_speed(struct dwc3 *dwc) +{ + enum usb_device_speed speed; + u32 reg; + + speed = dwc->gadget_max_speed; + if (speed == USB_SPEED_UNKNOWN || speed > dwc->maximum_speed) + speed = dwc->maximum_speed; + + if (speed == USB_SPEED_SUPER_PLUS && + DWC3_IP_IS(DWC32)) { + __dwc3_gadget_set_ssp_rate(dwc); + return; + } + + reg = dwc3_readl(dwc->regs, DWC3_DCFG); + reg &= ~(DWC3_DCFG_SPEED_MASK); + + /* + * WORKAROUND: DWC3 revision < 2.20a have an issue + * which would cause metastability state on Run/Stop + * bit if we try to force the IP to USB2-only mode. + * + * Because of that, we cannot configure the IP to any + * speed other than the SuperSpeed + * + * Refers to: + * + * STAR#9000525659: Clock Domain Crossing on DCTL in + * USB 2.0 Mode + */ + if (DWC3_VER_IS_PRIOR(DWC3, 220A) && + !dwc->dis_metastability_quirk) { + reg |= DWC3_DCFG_SUPERSPEED; + } else { + switch (speed) { + case USB_SPEED_FULL: + reg |= DWC3_DCFG_FULLSPEED; + break; + case USB_SPEED_HIGH: + reg |= DWC3_DCFG_HIGHSPEED; + break; + case USB_SPEED_SUPER: + reg |= DWC3_DCFG_SUPERSPEED; + break; + case USB_SPEED_SUPER_PLUS: + if (DWC3_IP_IS(DWC3)) + reg |= DWC3_DCFG_SUPERSPEED; + else + reg |= DWC3_DCFG_SUPERSPEED_PLUS; + break; + default: + dev_err(dwc->dev, "invalid speed (%d)\n", speed); + + if (DWC3_IP_IS(DWC3)) + reg |= DWC3_DCFG_SUPERSPEED; + else + reg |= DWC3_DCFG_SUPERSPEED_PLUS; + } + } + + if (DWC3_IP_IS(DWC32) && + speed > USB_SPEED_UNKNOWN && + speed < USB_SPEED_SUPER_PLUS) + reg &= ~DWC3_DCFG_NUMLANES(~0); + + dwc3_writel(dwc->regs, DWC3_DCFG, reg); +} + +static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on) +{ + u32 reg; + u32 timeout = 2000; + + if (pm_runtime_suspended(dwc->dev)) + return 0; + + reg = dwc3_readl(dwc->regs, DWC3_DCTL); + if (is_on) { + if (DWC3_VER_IS_WITHIN(DWC3, ANY, 187A)) { + reg &= ~DWC3_DCTL_TRGTULST_MASK; + reg |= DWC3_DCTL_TRGTULST_RX_DET; + } + + if (!DWC3_VER_IS_PRIOR(DWC3, 194A)) + reg &= ~DWC3_DCTL_KEEP_CONNECT; + reg |= DWC3_DCTL_RUN_STOP; + + __dwc3_gadget_set_speed(dwc); + dwc->pullups_connected = true; + } else { + reg &= ~DWC3_DCTL_RUN_STOP; + + dwc->pullups_connected = false; + } + + dwc3_gadget_dctl_write_safe(dwc, reg); + + do { + usleep_range(1000, 2000); + reg = dwc3_readl(dwc->regs, DWC3_DSTS); + reg &= DWC3_DSTS_DEVCTRLHLT; + } while (--timeout && !(!is_on ^ !reg)); + + if (!timeout) + return -ETIMEDOUT; + + return 0; +} + +static void dwc3_gadget_disable_irq(struct dwc3 *dwc); +static void __dwc3_gadget_stop(struct dwc3 *dwc); +static int __dwc3_gadget_start(struct dwc3 *dwc); + +static int dwc3_gadget_soft_disconnect(struct dwc3 *dwc) +{ + unsigned long flags; + int ret; + + spin_lock_irqsave(&dwc->lock, flags); + dwc->connected = false; + + /* + * Attempt to end pending SETUP status phase, and not wait for the + * function to do so. + */ + if (dwc->delayed_status) + dwc3_ep0_send_delayed_status(dwc); + + /* + * In the Synopsys DesignWare Cores USB3 Databook Rev. 3.30a + * Section 4.1.8 Table 4-7, it states that for a device-initiated + * disconnect, the SW needs to ensure that it sends "a DEPENDXFER + * command for any active transfers" before clearing the RunStop + * bit. + */ + dwc3_stop_active_transfers(dwc); + spin_unlock_irqrestore(&dwc->lock, flags); + + /* + * Per databook, when we want to stop the gadget, if a control transfer + * is still in process, complete it and get the core into setup phase. + * In case the host is unresponsive to a SETUP transaction, forcefully + * stall the transfer, and move back to the SETUP phase, so that any + * pending endxfers can be executed. + */ + if (dwc->ep0state != EP0_SETUP_PHASE) { + reinit_completion(&dwc->ep0_in_setup); + + ret = wait_for_completion_timeout(&dwc->ep0_in_setup, + msecs_to_jiffies(DWC3_PULL_UP_TIMEOUT)); + if (ret == 0) { + dev_warn(dwc->dev, "wait for SETUP phase timed out\n"); + spin_lock_irqsave(&dwc->lock, flags); + dwc3_ep0_reset_state(dwc); + spin_unlock_irqrestore(&dwc->lock, flags); + } + } + + /* + * Note: if the GEVNTCOUNT indicates events in the event buffer, the + * driver needs to acknowledge them before the controller can halt. + * Simply let the interrupt handler acknowledges and handle the + * remaining event generated by the controller while polling for + * DSTS.DEVCTLHLT. + */ + ret = dwc3_gadget_run_stop(dwc, false); + + /* + * Stop the gadget after controller is halted, so that if needed, the + * events to update EP0 state can still occur while the run/stop + * routine polls for the halted state. DEVTEN is cleared as part of + * gadget stop. + */ + spin_lock_irqsave(&dwc->lock, flags); + __dwc3_gadget_stop(dwc); + spin_unlock_irqrestore(&dwc->lock, flags); + + return ret; +} + +static int dwc3_gadget_soft_connect(struct dwc3 *dwc) +{ + /* + * In the Synopsys DWC_usb31 1.90a programming guide section + * 4.1.9, it specifies that for a reconnect after a + * device-initiated disconnect requires a core soft reset + * (DCTL.CSftRst) before enabling the run/stop bit. + */ + dwc3_core_soft_reset(dwc); + + dwc3_event_buffers_setup(dwc); + __dwc3_gadget_start(dwc); + return dwc3_gadget_run_stop(dwc, true); +} + +static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on) +{ + struct dwc3 *dwc = gadget_to_dwc(g); + int ret; + + is_on = !!is_on; + + dwc->softconnect = is_on; + + /* + * Avoid issuing a runtime resume if the device is already in the + * suspended state during gadget disconnect. DWC3 gadget was already + * halted/stopped during runtime suspend. + */ + if (!is_on) { + pm_runtime_barrier(dwc->dev); + if (pm_runtime_suspended(dwc->dev)) + return 0; + } + + /* + * Check the return value for successful resume, or error. For a + * successful resume, the DWC3 runtime PM resume routine will handle + * the run stop sequence, so avoid duplicate operations here. + */ + ret = pm_runtime_get_sync(dwc->dev); + if (!ret || ret < 0) { + pm_runtime_put(dwc->dev); + if (ret < 0) + pm_runtime_set_suspended(dwc->dev); + return ret; + } + + if (dwc->pullups_connected == is_on) { + pm_runtime_put(dwc->dev); + return 0; + } + + synchronize_irq(dwc->irq_gadget); + + if (!is_on) + ret = dwc3_gadget_soft_disconnect(dwc); + else + ret = dwc3_gadget_soft_connect(dwc); + + pm_runtime_put(dwc->dev); + + return ret; +} + +static void dwc3_gadget_enable_irq(struct dwc3 *dwc) +{ + u32 reg; + + /* Enable all but Start and End of Frame IRQs */ + reg = (DWC3_DEVTEN_EVNTOVERFLOWEN | + DWC3_DEVTEN_CMDCMPLTEN | + DWC3_DEVTEN_ERRTICERREN | + DWC3_DEVTEN_WKUPEVTEN | + DWC3_DEVTEN_CONNECTDONEEN | + DWC3_DEVTEN_USBRSTEN | + DWC3_DEVTEN_DISCONNEVTEN); + + if (DWC3_VER_IS_PRIOR(DWC3, 250A)) + reg |= DWC3_DEVTEN_ULSTCNGEN; + + /* On 2.30a and above this bit enables U3/L2-L1 Suspend Events */ + if (!DWC3_VER_IS_PRIOR(DWC3, 230A)) + reg |= DWC3_DEVTEN_U3L2L1SUSPEN; + + dwc3_writel(dwc->regs, DWC3_DEVTEN, reg); +} + +static void dwc3_gadget_disable_irq(struct dwc3 *dwc) +{ + /* mask all interrupts */ + dwc3_writel(dwc->regs, DWC3_DEVTEN, 0x00); +} + +static irqreturn_t dwc3_interrupt(int irq, void *_dwc); +static irqreturn_t dwc3_thread_interrupt(int irq, void *_dwc); + +/** + * dwc3_gadget_setup_nump - calculate and initialize NUMP field of %DWC3_DCFG + * @dwc: pointer to our context structure + * + * The following looks like complex but it's actually very simple. In order to + * calculate the number of packets we can burst at once on OUT transfers, we're + * gonna use RxFIFO size. + * + * To calculate RxFIFO size we need two numbers: + * MDWIDTH = size, in bits, of the internal memory bus + * RAM2_DEPTH = depth, in MDWIDTH, of internal RAM2 (where RxFIFO sits) + * + * Given these two numbers, the formula is simple: + * + * RxFIFO Size = (RAM2_DEPTH * MDWIDTH / 8) - 24 - 16; + * + * 24 bytes is for 3x SETUP packets + * 16 bytes is a clock domain crossing tolerance + * + * Given RxFIFO Size, NUMP = RxFIFOSize / 1024; + */ +static void dwc3_gadget_setup_nump(struct dwc3 *dwc) +{ + u32 ram2_depth; + u32 mdwidth; + u32 nump; + u32 reg; + + ram2_depth = DWC3_GHWPARAMS7_RAM2_DEPTH(dwc->hwparams.hwparams7); + mdwidth = dwc3_mdwidth(dwc); + + nump = ((ram2_depth * mdwidth / 8) - 24 - 16) / 1024; + nump = min_t(u32, nump, 16); + + /* update NumP */ + reg = dwc3_readl(dwc->regs, DWC3_DCFG); + reg &= ~DWC3_DCFG_NUMP_MASK; + reg |= nump << DWC3_DCFG_NUMP_SHIFT; + dwc3_writel(dwc->regs, DWC3_DCFG, reg); +} + +static int __dwc3_gadget_start(struct dwc3 *dwc) +{ + struct dwc3_ep *dep; + int ret = 0; + u32 reg; + + /* + * Use IMOD if enabled via dwc->imod_interval. Otherwise, if + * the core supports IMOD, disable it. + */ + if (dwc->imod_interval) { + dwc3_writel(dwc->regs, DWC3_DEV_IMOD(0), dwc->imod_interval); + dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(0), DWC3_GEVNTCOUNT_EHB); + } else if (dwc3_has_imod(dwc)) { + dwc3_writel(dwc->regs, DWC3_DEV_IMOD(0), 0); + } + + /* + * We are telling dwc3 that we want to use DCFG.NUMP as ACK TP's NUMP + * field instead of letting dwc3 itself calculate that automatically. + * + * This way, we maximize the chances that we'll be able to get several + * bursts of data without going through any sort of endpoint throttling. + */ + reg = dwc3_readl(dwc->regs, DWC3_GRXTHRCFG); + if (DWC3_IP_IS(DWC3)) + reg &= ~DWC3_GRXTHRCFG_PKTCNTSEL; + else + reg &= ~DWC31_GRXTHRCFG_PKTCNTSEL; + + dwc3_writel(dwc->regs, DWC3_GRXTHRCFG, reg); + + dwc3_gadget_setup_nump(dwc); + + /* + * Currently the controller handles single stream only. So, Ignore + * Packet Pending bit for stream selection and don't search for another + * stream if the host sends Data Packet with PP=0 (for OUT direction) or + * ACK with NumP=0 and PP=0 (for IN direction). This slightly improves + * the stream performance. + */ + reg = dwc3_readl(dwc->regs, DWC3_DCFG); + reg |= DWC3_DCFG_IGNSTRMPP; + dwc3_writel(dwc->regs, DWC3_DCFG, reg); + + /* Enable MST by default if the device is capable of MST */ + if (DWC3_MST_CAPABLE(&dwc->hwparams)) { + reg = dwc3_readl(dwc->regs, DWC3_DCFG1); + reg &= ~DWC3_DCFG1_DIS_MST_ENH; + dwc3_writel(dwc->regs, DWC3_DCFG1, reg); + } + + /* Start with SuperSpeed Default */ + dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512); + + dep = dwc->eps[0]; + dep->flags = 0; + ret = __dwc3_gadget_ep_enable(dep, DWC3_DEPCFG_ACTION_INIT); + if (ret) { + dev_err(dwc->dev, "failed to enable %s\n", dep->name); + goto err0; + } + + dep = dwc->eps[1]; + dep->flags = 0; + ret = __dwc3_gadget_ep_enable(dep, DWC3_DEPCFG_ACTION_INIT); + if (ret) { + dev_err(dwc->dev, "failed to enable %s\n", dep->name); + goto err1; + } + + /* begin to receive SETUP packets */ + dwc->ep0state = EP0_SETUP_PHASE; + dwc->ep0_bounced = false; + dwc->link_state = DWC3_LINK_STATE_SS_DIS; + dwc->delayed_status = false; + dwc3_ep0_out_start(dwc); + + dwc3_gadget_enable_irq(dwc); + + return 0; + +err1: + __dwc3_gadget_ep_disable(dwc->eps[0]); + +err0: + return ret; +} + +static int dwc3_gadget_start(struct usb_gadget *g, + struct usb_gadget_driver *driver) +{ + struct dwc3 *dwc = gadget_to_dwc(g); + unsigned long flags; + int ret; + int irq; + + irq = dwc->irq_gadget; + ret = request_threaded_irq(irq, dwc3_interrupt, dwc3_thread_interrupt, + IRQF_SHARED, "dwc3", dwc->ev_buf); + if (ret) { + dev_err(dwc->dev, "failed to request irq #%d --> %d\n", + irq, ret); + return ret; + } + + spin_lock_irqsave(&dwc->lock, flags); + dwc->gadget_driver = driver; + spin_unlock_irqrestore(&dwc->lock, flags); + + return 0; +} + +static void __dwc3_gadget_stop(struct dwc3 *dwc) +{ + dwc3_gadget_disable_irq(dwc); + __dwc3_gadget_ep_disable(dwc->eps[0]); + __dwc3_gadget_ep_disable(dwc->eps[1]); +} + +static int dwc3_gadget_stop(struct usb_gadget *g) +{ + struct dwc3 *dwc = gadget_to_dwc(g); + unsigned long flags; + + spin_lock_irqsave(&dwc->lock, flags); + dwc->gadget_driver = NULL; + dwc->max_cfg_eps = 0; + spin_unlock_irqrestore(&dwc->lock, flags); + + free_irq(dwc->irq_gadget, dwc->ev_buf); + + return 0; +} + +static void dwc3_gadget_config_params(struct usb_gadget *g, + struct usb_dcd_config_params *params) +{ + struct dwc3 *dwc = gadget_to_dwc(g); + + params->besl_baseline = USB_DEFAULT_BESL_UNSPECIFIED; + params->besl_deep = USB_DEFAULT_BESL_UNSPECIFIED; + + /* Recommended BESL */ + if (!dwc->dis_enblslpm_quirk) { + /* + * If the recommended BESL baseline is 0 or if the BESL deep is + * less than 2, Microsoft's Windows 10 host usb stack will issue + * a usb reset immediately after it receives the extended BOS + * descriptor and the enumeration will fail. To maintain + * compatibility with the Windows' usb stack, let's set the + * recommended BESL baseline to 1 and clamp the BESL deep to be + * within 2 to 15. + */ + params->besl_baseline = 1; + if (dwc->is_utmi_l1_suspend) + params->besl_deep = + clamp_t(u8, dwc->hird_threshold, 2, 15); + } + + /* U1 Device exit Latency */ + if (dwc->dis_u1_entry_quirk) + params->bU1devExitLat = 0; + else + params->bU1devExitLat = DWC3_DEFAULT_U1_DEV_EXIT_LAT; + + /* U2 Device exit Latency */ + if (dwc->dis_u2_entry_quirk) + params->bU2DevExitLat = 0; + else + params->bU2DevExitLat = + cpu_to_le16(DWC3_DEFAULT_U2_DEV_EXIT_LAT); +} + +static void dwc3_gadget_set_speed(struct usb_gadget *g, + enum usb_device_speed speed) +{ + struct dwc3 *dwc = gadget_to_dwc(g); + unsigned long flags; + + spin_lock_irqsave(&dwc->lock, flags); + dwc->gadget_max_speed = speed; + spin_unlock_irqrestore(&dwc->lock, flags); +} + +static void dwc3_gadget_set_ssp_rate(struct usb_gadget *g, + enum usb_ssp_rate rate) +{ + struct dwc3 *dwc = gadget_to_dwc(g); + unsigned long flags; + + spin_lock_irqsave(&dwc->lock, flags); + dwc->gadget_max_speed = USB_SPEED_SUPER_PLUS; + dwc->gadget_ssp_rate = rate; + spin_unlock_irqrestore(&dwc->lock, flags); +} + +static int dwc3_gadget_vbus_draw(struct usb_gadget *g, unsigned int mA) +{ + struct dwc3 *dwc = gadget_to_dwc(g); + union power_supply_propval val = {0}; + int ret; + + if (dwc->usb2_phy) + return usb_phy_set_power(dwc->usb2_phy, mA); + + if (!dwc->usb_psy) + return -EOPNOTSUPP; + + val.intval = 1000 * mA; + ret = power_supply_set_property(dwc->usb_psy, POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT, &val); + + return ret; +} + +/** + * dwc3_gadget_check_config - ensure dwc3 can support the USB configuration + * @g: pointer to the USB gadget + * + * Used to record the maximum number of endpoints being used in a USB composite + * device. (across all configurations) This is to be used in the calculation + * of the TXFIFO sizes when resizing internal memory for individual endpoints. + * It will help ensured that the resizing logic reserves enough space for at + * least one max packet. + */ +static int dwc3_gadget_check_config(struct usb_gadget *g) +{ + struct dwc3 *dwc = gadget_to_dwc(g); + struct usb_ep *ep; + int fifo_size = 0; + int ram1_depth; + int ep_num = 0; + + if (!dwc->do_fifo_resize) + return 0; + + list_for_each_entry(ep, &g->ep_list, ep_list) { + /* Only interested in the IN endpoints */ + if (ep->claimed && (ep->address & USB_DIR_IN)) + ep_num++; + } + + if (ep_num <= dwc->max_cfg_eps) + return 0; + + /* Update the max number of eps in the composition */ + dwc->max_cfg_eps = ep_num; + + fifo_size = dwc3_gadget_calc_tx_fifo_size(dwc, dwc->max_cfg_eps); + /* Based on the equation, increment by one for every ep */ + fifo_size += dwc->max_cfg_eps; + + /* Check if we can fit a single fifo per endpoint */ + ram1_depth = DWC3_RAM1_DEPTH(dwc->hwparams.hwparams7); + if (fifo_size > ram1_depth) + return -ENOMEM; + + return 0; +} + +static void dwc3_gadget_async_callbacks(struct usb_gadget *g, bool enable) +{ + struct dwc3 *dwc = gadget_to_dwc(g); + unsigned long flags; + + spin_lock_irqsave(&dwc->lock, flags); + dwc->async_callbacks = enable; + spin_unlock_irqrestore(&dwc->lock, flags); +} + +static const struct usb_gadget_ops dwc3_gadget_ops = { + .get_frame = dwc3_gadget_get_frame, + .wakeup = dwc3_gadget_wakeup, + .set_selfpowered = dwc3_gadget_set_selfpowered, + .pullup = dwc3_gadget_pullup, + .udc_start = dwc3_gadget_start, + .udc_stop = dwc3_gadget_stop, + .udc_set_speed = dwc3_gadget_set_speed, + .udc_set_ssp_rate = dwc3_gadget_set_ssp_rate, + .get_config_params = dwc3_gadget_config_params, + .vbus_draw = dwc3_gadget_vbus_draw, + .check_config = dwc3_gadget_check_config, + .udc_async_callbacks = dwc3_gadget_async_callbacks, +}; + +/* -------------------------------------------------------------------------- */ + +static int dwc3_gadget_init_control_endpoint(struct dwc3_ep *dep) +{ + struct dwc3 *dwc = dep->dwc; + + usb_ep_set_maxpacket_limit(&dep->endpoint, 512); + dep->endpoint.maxburst = 1; + dep->endpoint.ops = &dwc3_gadget_ep0_ops; + if (!dep->direction) + dwc->gadget->ep0 = &dep->endpoint; + + dep->endpoint.caps.type_control = true; + + return 0; +} + +static int dwc3_gadget_init_in_endpoint(struct dwc3_ep *dep) +{ + struct dwc3 *dwc = dep->dwc; + u32 mdwidth; + int size; + int maxpacket; + + mdwidth = dwc3_mdwidth(dwc); + + /* MDWIDTH is represented in bits, we need it in bytes */ + mdwidth /= 8; + + size = dwc3_readl(dwc->regs, DWC3_GTXFIFOSIZ(dep->number >> 1)); + if (DWC3_IP_IS(DWC3)) + size = DWC3_GTXFIFOSIZ_TXFDEP(size); + else + size = DWC31_GTXFIFOSIZ_TXFDEP(size); + + /* + * maxpacket size is determined as part of the following, after assuming + * a mult value of one maxpacket: + * DWC3 revision 280A and prior: + * fifo_size = mult * (max_packet / mdwidth) + 1; + * maxpacket = mdwidth * (fifo_size - 1); + * + * DWC3 revision 290A and onwards: + * fifo_size = mult * ((max_packet + mdwidth)/mdwidth + 1) + 1 + * maxpacket = mdwidth * ((fifo_size - 1) - 1) - mdwidth; + */ + if (DWC3_VER_IS_PRIOR(DWC3, 290A)) + maxpacket = mdwidth * (size - 1); + else + maxpacket = mdwidth * ((size - 1) - 1) - mdwidth; + + /* Functionally, space for one max packet is sufficient */ + size = min_t(int, maxpacket, 1024); + usb_ep_set_maxpacket_limit(&dep->endpoint, size); + + dep->endpoint.max_streams = 16; + dep->endpoint.ops = &dwc3_gadget_ep_ops; + list_add_tail(&dep->endpoint.ep_list, + &dwc->gadget->ep_list); + dep->endpoint.caps.type_iso = true; + dep->endpoint.caps.type_bulk = true; + dep->endpoint.caps.type_int = true; + + return dwc3_alloc_trb_pool(dep); +} + +static int dwc3_gadget_init_out_endpoint(struct dwc3_ep *dep) +{ + struct dwc3 *dwc = dep->dwc; + u32 mdwidth; + int size; + + mdwidth = dwc3_mdwidth(dwc); + + /* MDWIDTH is represented in bits, convert to bytes */ + mdwidth /= 8; + + /* All OUT endpoints share a single RxFIFO space */ + size = dwc3_readl(dwc->regs, DWC3_GRXFIFOSIZ(0)); + if (DWC3_IP_IS(DWC3)) + size = DWC3_GRXFIFOSIZ_RXFDEP(size); + else + size = DWC31_GRXFIFOSIZ_RXFDEP(size); + + /* FIFO depth is in MDWDITH bytes */ + size *= mdwidth; + + /* + * To meet performance requirement, a minimum recommended RxFIFO size + * is defined as follow: + * RxFIFO size >= (3 x MaxPacketSize) + + * (3 x 8 bytes setup packets size) + (16 bytes clock crossing margin) + * + * Then calculate the max packet limit as below. + */ + size -= (3 * 8) + 16; + if (size < 0) + size = 0; + else + size /= 3; + + usb_ep_set_maxpacket_limit(&dep->endpoint, size); + dep->endpoint.max_streams = 16; + dep->endpoint.ops = &dwc3_gadget_ep_ops; + list_add_tail(&dep->endpoint.ep_list, + &dwc->gadget->ep_list); + dep->endpoint.caps.type_iso = true; + dep->endpoint.caps.type_bulk = true; + dep->endpoint.caps.type_int = true; + + return dwc3_alloc_trb_pool(dep); +} + +static int dwc3_gadget_init_endpoint(struct dwc3 *dwc, u8 epnum) +{ + struct dwc3_ep *dep; + bool direction = epnum & 1; + int ret; + u8 num = epnum >> 1; + + dep = kzalloc(sizeof(*dep), GFP_KERNEL); + if (!dep) + return -ENOMEM; + + dep->dwc = dwc; + dep->number = epnum; + dep->direction = direction; + dep->regs = dwc->regs + DWC3_DEP_BASE(epnum); + dwc->eps[epnum] = dep; + dep->combo_num = 0; + dep->start_cmd_status = 0; + + snprintf(dep->name, sizeof(dep->name), "ep%u%s", num, + direction ? "in" : "out"); + + dep->endpoint.name = dep->name; + + if (!(dep->number > 1)) { + dep->endpoint.desc = &dwc3_gadget_ep0_desc; + dep->endpoint.comp_desc = NULL; + } + + if (num == 0) + ret = dwc3_gadget_init_control_endpoint(dep); + else if (direction) + ret = dwc3_gadget_init_in_endpoint(dep); + else + ret = dwc3_gadget_init_out_endpoint(dep); + + if (ret) + return ret; + + dep->endpoint.caps.dir_in = direction; + dep->endpoint.caps.dir_out = !direction; + + INIT_LIST_HEAD(&dep->pending_list); + INIT_LIST_HEAD(&dep->started_list); + INIT_LIST_HEAD(&dep->cancelled_list); + + dwc3_debugfs_create_endpoint_dir(dep); + + return 0; +} + +static int dwc3_gadget_init_endpoints(struct dwc3 *dwc, u8 total) +{ + u8 epnum; + + INIT_LIST_HEAD(&dwc->gadget->ep_list); + + for (epnum = 0; epnum < total; epnum++) { + int ret; + + ret = dwc3_gadget_init_endpoint(dwc, epnum); + if (ret) + return ret; + } + + return 0; +} + +static void dwc3_gadget_free_endpoints(struct dwc3 *dwc) +{ + struct dwc3_ep *dep; + u8 epnum; + + for (epnum = 0; epnum < DWC3_ENDPOINTS_NUM; epnum++) { + dep = dwc->eps[epnum]; + if (!dep) + continue; + /* + * Physical endpoints 0 and 1 are special; they form the + * bi-directional USB endpoint 0. + * + * For those two physical endpoints, we don't allocate a TRB + * pool nor do we add them the endpoints list. Due to that, we + * shouldn't do these two operations otherwise we would end up + * with all sorts of bugs when removing dwc3.ko. + */ + if (epnum != 0 && epnum != 1) { + dwc3_free_trb_pool(dep); + list_del(&dep->endpoint.ep_list); + } + + dwc3_debugfs_remove_endpoint_dir(dep); + kfree(dep); + } +} + +/* -------------------------------------------------------------------------- */ + +static int dwc3_gadget_ep_reclaim_completed_trb(struct dwc3_ep *dep, + struct dwc3_request *req, struct dwc3_trb *trb, + const struct dwc3_event_depevt *event, int status, int chain) +{ + unsigned int count; + + dwc3_ep_inc_deq(dep); + + trace_dwc3_complete_trb(dep, trb); + req->num_trbs--; + + /* + * If we're in the middle of series of chained TRBs and we + * receive a short transfer along the way, DWC3 will skip + * through all TRBs including the last TRB in the chain (the + * where CHN bit is zero. DWC3 will also avoid clearing HWO + * bit and SW has to do it manually. + * + * We're going to do that here to avoid problems of HW trying + * to use bogus TRBs for transfers. + */ + if (chain && (trb->ctrl & DWC3_TRB_CTRL_HWO)) + trb->ctrl &= ~DWC3_TRB_CTRL_HWO; + + /* + * For isochronous transfers, the first TRB in a service interval must + * have the Isoc-First type. Track and report its interval frame number. + */ + if (usb_endpoint_xfer_isoc(dep->endpoint.desc) && + (trb->ctrl & DWC3_TRBCTL_ISOCHRONOUS_FIRST)) { + unsigned int frame_number; + + frame_number = DWC3_TRB_CTRL_GET_SID_SOFN(trb->ctrl); + frame_number &= ~(dep->interval - 1); + req->request.frame_number = frame_number; + } + + /* + * We use bounce buffer for requests that needs extra TRB or OUT ZLP. If + * this TRB points to the bounce buffer address, it's a MPS alignment + * TRB. Don't add it to req->remaining calculation. + */ + if (trb->bpl == lower_32_bits(dep->dwc->bounce_addr) && + trb->bph == upper_32_bits(dep->dwc->bounce_addr)) { + trb->ctrl &= ~DWC3_TRB_CTRL_HWO; + return 1; + } + + count = trb->size & DWC3_TRB_SIZE_MASK; + req->remaining += count; + + if ((trb->ctrl & DWC3_TRB_CTRL_HWO) && status != -ESHUTDOWN) + return 1; + + if (event->status & DEPEVT_STATUS_SHORT && !chain) + return 1; + + if ((trb->ctrl & DWC3_TRB_CTRL_ISP_IMI) && + DWC3_TRB_SIZE_TRBSTS(trb->size) == DWC3_TRBSTS_MISSED_ISOC) + return 1; + + if ((trb->ctrl & DWC3_TRB_CTRL_IOC) || + (trb->ctrl & DWC3_TRB_CTRL_LST)) + return 1; + + return 0; +} + +static int dwc3_gadget_ep_reclaim_trb_sg(struct dwc3_ep *dep, + struct dwc3_request *req, const struct dwc3_event_depevt *event, + int status) +{ + struct dwc3_trb *trb = &dep->trb_pool[dep->trb_dequeue]; + struct scatterlist *sg = req->sg; + struct scatterlist *s; + unsigned int num_queued = req->num_queued_sgs; + unsigned int i; + int ret = 0; + + for_each_sg(sg, s, num_queued, i) { + trb = &dep->trb_pool[dep->trb_dequeue]; + + req->sg = sg_next(s); + req->num_queued_sgs--; + + ret = dwc3_gadget_ep_reclaim_completed_trb(dep, req, + trb, event, status, true); + if (ret) + break; + } + + return ret; +} + +static int dwc3_gadget_ep_reclaim_trb_linear(struct dwc3_ep *dep, + struct dwc3_request *req, const struct dwc3_event_depevt *event, + int status) +{ + struct dwc3_trb *trb = &dep->trb_pool[dep->trb_dequeue]; + + return dwc3_gadget_ep_reclaim_completed_trb(dep, req, trb, + event, status, false); +} + +static bool dwc3_gadget_ep_request_completed(struct dwc3_request *req) +{ + return req->num_pending_sgs == 0 && req->num_queued_sgs == 0; +} + +static int dwc3_gadget_ep_cleanup_completed_request(struct dwc3_ep *dep, + const struct dwc3_event_depevt *event, + struct dwc3_request *req, int status) +{ + int request_status; + int ret; + + if (req->request.num_mapped_sgs) + ret = dwc3_gadget_ep_reclaim_trb_sg(dep, req, event, + status); + else + ret = dwc3_gadget_ep_reclaim_trb_linear(dep, req, event, + status); + + req->request.actual = req->request.length - req->remaining; + + if (!dwc3_gadget_ep_request_completed(req)) + goto out; + + if (req->needs_extra_trb) { + ret = dwc3_gadget_ep_reclaim_trb_linear(dep, req, event, + status); + req->needs_extra_trb = false; + } + + /* + * The event status only reflects the status of the TRB with IOC set. + * For the requests that don't set interrupt on completion, the driver + * needs to check and return the status of the completed TRBs associated + * with the request. Use the status of the last TRB of the request. + */ + if (req->request.no_interrupt) { + struct dwc3_trb *trb; + + trb = dwc3_ep_prev_trb(dep, dep->trb_dequeue); + switch (DWC3_TRB_SIZE_TRBSTS(trb->size)) { + case DWC3_TRBSTS_MISSED_ISOC: + /* Isoc endpoint only */ + request_status = -EXDEV; + break; + case DWC3_TRB_STS_XFER_IN_PROG: + /* Applicable when End Transfer with ForceRM=0 */ + case DWC3_TRBSTS_SETUP_PENDING: + /* Control endpoint only */ + case DWC3_TRBSTS_OK: + default: + request_status = 0; + break; + } + } else { + request_status = status; + } + + dwc3_gadget_giveback(dep, req, request_status); + +out: + return ret; +} + +static void dwc3_gadget_ep_cleanup_completed_requests(struct dwc3_ep *dep, + const struct dwc3_event_depevt *event, int status) +{ + struct dwc3_request *req; + + while (!list_empty(&dep->started_list)) { + int ret; + + req = next_request(&dep->started_list); + ret = dwc3_gadget_ep_cleanup_completed_request(dep, event, + req, status); + if (ret) + break; + /* + * The endpoint is disabled, let the dwc3_remove_requests() + * handle the cleanup. + */ + if (!dep->endpoint.desc) + break; + } +} + +static bool dwc3_gadget_ep_should_continue(struct dwc3_ep *dep) +{ + struct dwc3_request *req; + struct dwc3 *dwc = dep->dwc; + + if (!dep->endpoint.desc || !dwc->pullups_connected || + !dwc->connected) + return false; + + if (!list_empty(&dep->pending_list)) + return true; + + /* + * We only need to check the first entry of the started list. We can + * assume the completed requests are removed from the started list. + */ + req = next_request(&dep->started_list); + if (!req) + return false; + + return !dwc3_gadget_ep_request_completed(req); +} + +static void dwc3_gadget_endpoint_frame_from_event(struct dwc3_ep *dep, + const struct dwc3_event_depevt *event) +{ + dep->frame_number = event->parameters; +} + +static bool dwc3_gadget_endpoint_trbs_complete(struct dwc3_ep *dep, + const struct dwc3_event_depevt *event, int status) +{ + struct dwc3 *dwc = dep->dwc; + bool no_started_trb = true; + + dwc3_gadget_ep_cleanup_completed_requests(dep, event, status); + + if (dep->flags & DWC3_EP_END_TRANSFER_PENDING) + goto out; + + if (!dep->endpoint.desc) + return no_started_trb; + + if (usb_endpoint_xfer_isoc(dep->endpoint.desc) && + list_empty(&dep->started_list) && + (list_empty(&dep->pending_list) || status == -EXDEV)) + dwc3_stop_active_transfer(dep, true, true); + else if (dwc3_gadget_ep_should_continue(dep)) + if (__dwc3_gadget_kick_transfer(dep) == 0) + no_started_trb = false; + +out: + /* + * WORKAROUND: This is the 2nd half of U1/U2 -> U0 workaround. + * See dwc3_gadget_linksts_change_interrupt() for 1st half. + */ + if (DWC3_VER_IS_PRIOR(DWC3, 183A)) { + u32 reg; + int i; + + for (i = 0; i < DWC3_ENDPOINTS_NUM; i++) { + dep = dwc->eps[i]; + + if (!(dep->flags & DWC3_EP_ENABLED)) + continue; + + if (!list_empty(&dep->started_list)) + return no_started_trb; + } + + reg = dwc3_readl(dwc->regs, DWC3_DCTL); + reg |= dwc->u1u2; + dwc3_writel(dwc->regs, DWC3_DCTL, reg); + + dwc->u1u2 = 0; + } + + return no_started_trb; +} + +static void dwc3_gadget_endpoint_transfer_in_progress(struct dwc3_ep *dep, + const struct dwc3_event_depevt *event) +{ + int status = 0; + + if (!dep->endpoint.desc) + return; + + if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) + dwc3_gadget_endpoint_frame_from_event(dep, event); + + if (event->status & DEPEVT_STATUS_BUSERR) + status = -ECONNRESET; + + if (event->status & DEPEVT_STATUS_MISSED_ISOC) + status = -EXDEV; + + dwc3_gadget_endpoint_trbs_complete(dep, event, status); +} + +static void dwc3_gadget_endpoint_transfer_complete(struct dwc3_ep *dep, + const struct dwc3_event_depevt *event) +{ + int status = 0; + + dep->flags &= ~DWC3_EP_TRANSFER_STARTED; + + if (event->status & DEPEVT_STATUS_BUSERR) + status = -ECONNRESET; + + if (dwc3_gadget_endpoint_trbs_complete(dep, event, status)) + dep->flags &= ~DWC3_EP_WAIT_TRANSFER_COMPLETE; +} + +static void dwc3_gadget_endpoint_transfer_not_ready(struct dwc3_ep *dep, + const struct dwc3_event_depevt *event) +{ + dwc3_gadget_endpoint_frame_from_event(dep, event); + + /* + * The XferNotReady event is generated only once before the endpoint + * starts. It will be generated again when END_TRANSFER command is + * issued. For some controller versions, the XferNotReady event may be + * generated while the END_TRANSFER command is still in process. Ignore + * it and wait for the next XferNotReady event after the command is + * completed. + */ + if (dep->flags & DWC3_EP_END_TRANSFER_PENDING) + return; + + (void) __dwc3_gadget_start_isoc(dep); +} + +static void dwc3_gadget_endpoint_command_complete(struct dwc3_ep *dep, + const struct dwc3_event_depevt *event) +{ + u8 cmd = DEPEVT_PARAMETER_CMD(event->parameters); + + if (cmd != DWC3_DEPCMD_ENDTRANSFER) + return; + + /* + * The END_TRANSFER command will cause the controller to generate a + * NoStream Event, and it's not due to the host DP NoStream rejection. + * Ignore the next NoStream event. + */ + if (dep->stream_capable) + dep->flags |= DWC3_EP_IGNORE_NEXT_NOSTREAM; + + dep->flags &= ~DWC3_EP_END_TRANSFER_PENDING; + dep->flags &= ~DWC3_EP_TRANSFER_STARTED; + dwc3_gadget_ep_cleanup_cancelled_requests(dep); + + if (dep->flags & DWC3_EP_PENDING_CLEAR_STALL) { + struct dwc3 *dwc = dep->dwc; + + dep->flags &= ~DWC3_EP_PENDING_CLEAR_STALL; + if (dwc3_send_clear_stall_ep_cmd(dep)) { + struct usb_ep *ep0 = &dwc->eps[0]->endpoint; + + dev_err(dwc->dev, "failed to clear STALL on %s\n", dep->name); + if (dwc->delayed_status) + __dwc3_gadget_ep0_set_halt(ep0, 1); + return; + } + + dep->flags &= ~(DWC3_EP_STALL | DWC3_EP_WEDGE); + if (dwc->clear_stall_protocol == dep->number) + dwc3_ep0_send_delayed_status(dwc); + } + + if ((dep->flags & DWC3_EP_DELAY_START) && + !usb_endpoint_xfer_isoc(dep->endpoint.desc)) + __dwc3_gadget_kick_transfer(dep); + + dep->flags &= ~DWC3_EP_DELAY_START; +} + +static void dwc3_gadget_endpoint_stream_event(struct dwc3_ep *dep, + const struct dwc3_event_depevt *event) +{ + struct dwc3 *dwc = dep->dwc; + + if (event->status == DEPEVT_STREAMEVT_FOUND) { + dep->flags |= DWC3_EP_FIRST_STREAM_PRIMED; + goto out; + } + + /* Note: NoStream rejection event param value is 0 and not 0xFFFF */ + switch (event->parameters) { + case DEPEVT_STREAM_PRIME: + /* + * If the host can properly transition the endpoint state from + * idle to prime after a NoStream rejection, there's no need to + * force restarting the endpoint to reinitiate the stream. To + * simplify the check, assume the host follows the USB spec if + * it primed the endpoint more than once. + */ + if (dep->flags & DWC3_EP_FORCE_RESTART_STREAM) { + if (dep->flags & DWC3_EP_FIRST_STREAM_PRIMED) + dep->flags &= ~DWC3_EP_FORCE_RESTART_STREAM; + else + dep->flags |= DWC3_EP_FIRST_STREAM_PRIMED; + } + + break; + case DEPEVT_STREAM_NOSTREAM: + if ((dep->flags & DWC3_EP_IGNORE_NEXT_NOSTREAM) || + !(dep->flags & DWC3_EP_FORCE_RESTART_STREAM) || + (!DWC3_MST_CAPABLE(&dwc->hwparams) && + !(dep->flags & DWC3_EP_WAIT_TRANSFER_COMPLETE))) + break; + + /* + * If the host rejects a stream due to no active stream, by the + * USB and xHCI spec, the endpoint will be put back to idle + * state. When the host is ready (buffer added/updated), it will + * prime the endpoint to inform the usb device controller. This + * triggers the device controller to issue ERDY to restart the + * stream. However, some hosts don't follow this and keep the + * endpoint in the idle state. No prime will come despite host + * streams are updated, and the device controller will not be + * triggered to generate ERDY to move the next stream data. To + * workaround this and maintain compatibility with various + * hosts, force to reinitiate the stream until the host is ready + * instead of waiting for the host to prime the endpoint. + */ + if (DWC3_VER_IS_WITHIN(DWC32, 100A, ANY)) { + unsigned int cmd = DWC3_DGCMD_SET_ENDPOINT_PRIME; + + dwc3_send_gadget_generic_command(dwc, cmd, dep->number); + } else { + dep->flags |= DWC3_EP_DELAY_START; + dwc3_stop_active_transfer(dep, true, true); + return; + } + break; + } + +out: + dep->flags &= ~DWC3_EP_IGNORE_NEXT_NOSTREAM; +} + +static void dwc3_endpoint_interrupt(struct dwc3 *dwc, + const struct dwc3_event_depevt *event) +{ + struct dwc3_ep *dep; + u8 epnum = event->endpoint_number; + + dep = dwc->eps[epnum]; + + if (!(dep->flags & DWC3_EP_ENABLED)) { + if ((epnum > 1) && !(dep->flags & DWC3_EP_TRANSFER_STARTED)) + return; + + /* Handle only EPCMDCMPLT when EP disabled */ + if ((event->endpoint_event != DWC3_DEPEVT_EPCMDCMPLT) && + !(epnum <= 1 && event->endpoint_event == DWC3_DEPEVT_XFERCOMPLETE)) + return; + } + + if (epnum == 0 || epnum == 1) { + dwc3_ep0_interrupt(dwc, event); + return; + } + + switch (event->endpoint_event) { + case DWC3_DEPEVT_XFERINPROGRESS: + dwc3_gadget_endpoint_transfer_in_progress(dep, event); + break; + case DWC3_DEPEVT_XFERNOTREADY: + dwc3_gadget_endpoint_transfer_not_ready(dep, event); + break; + case DWC3_DEPEVT_EPCMDCMPLT: + dwc3_gadget_endpoint_command_complete(dep, event); + break; + case DWC3_DEPEVT_XFERCOMPLETE: + dwc3_gadget_endpoint_transfer_complete(dep, event); + break; + case DWC3_DEPEVT_STREAMEVT: + dwc3_gadget_endpoint_stream_event(dep, event); + break; + case DWC3_DEPEVT_RXTXFIFOEVT: + break; + } +} + +static void dwc3_disconnect_gadget(struct dwc3 *dwc) +{ + if (dwc->async_callbacks && dwc->gadget_driver->disconnect) { + spin_unlock(&dwc->lock); + dwc->gadget_driver->disconnect(dwc->gadget); + spin_lock(&dwc->lock); + } +} + +static void dwc3_suspend_gadget(struct dwc3 *dwc) +{ + if (dwc->async_callbacks && dwc->gadget_driver->suspend) { + spin_unlock(&dwc->lock); + dwc->gadget_driver->suspend(dwc->gadget); + spin_lock(&dwc->lock); + } +} + +static void dwc3_resume_gadget(struct dwc3 *dwc) +{ + if (dwc->async_callbacks && dwc->gadget_driver->resume) { + spin_unlock(&dwc->lock); + dwc->gadget_driver->resume(dwc->gadget); + spin_lock(&dwc->lock); + } +} + +static void dwc3_reset_gadget(struct dwc3 *dwc) +{ + if (!dwc->gadget_driver) + return; + + if (dwc->async_callbacks && dwc->gadget->speed != USB_SPEED_UNKNOWN) { + spin_unlock(&dwc->lock); + usb_gadget_udc_reset(dwc->gadget, dwc->gadget_driver); + spin_lock(&dwc->lock); + } +} + +void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force, + bool interrupt) +{ + struct dwc3 *dwc = dep->dwc; + + /* + * Only issue End Transfer command to the control endpoint of a started + * Data Phase. Typically we should only do so in error cases such as + * invalid/unexpected direction as described in the control transfer + * flow of the programming guide. + */ + if (dep->number <= 1 && dwc->ep0state != EP0_DATA_PHASE) + return; + + if (interrupt && (dep->flags & DWC3_EP_DELAY_STOP)) + return; + + if (!(dep->flags & DWC3_EP_TRANSFER_STARTED) || + (dep->flags & DWC3_EP_END_TRANSFER_PENDING)) + return; + + /* + * If a Setup packet is received but yet to DMA out, the controller will + * not process the End Transfer command of any endpoint. Polling of its + * DEPCMD.CmdAct may block setting up TRB for Setup packet, causing a + * timeout. Delay issuing the End Transfer command until the Setup TRB is + * prepared. + */ + if (dwc->ep0state != EP0_SETUP_PHASE && !dwc->delayed_status) { + dep->flags |= DWC3_EP_DELAY_STOP; + return; + } + + /* + * NOTICE: We are violating what the Databook says about the + * EndTransfer command. Ideally we would _always_ wait for the + * EndTransfer Command Completion IRQ, but that's causing too + * much trouble synchronizing between us and gadget driver. + * + * We have discussed this with the IP Provider and it was + * suggested to giveback all requests here. + * + * Note also that a similar handling was tested by Synopsys + * (thanks a lot Paul) and nothing bad has come out of it. + * In short, what we're doing is issuing EndTransfer with + * CMDIOC bit set and delay kicking transfer until the + * EndTransfer command had completed. + * + * As of IP version 3.10a of the DWC_usb3 IP, the controller + * supports a mode to work around the above limitation. The + * software can poll the CMDACT bit in the DEPCMD register + * after issuing a EndTransfer command. This mode is enabled + * by writing GUCTL2[14]. This polling is already done in the + * dwc3_send_gadget_ep_cmd() function so if the mode is + * enabled, the EndTransfer command will have completed upon + * returning from this function. + * + * This mode is NOT available on the DWC_usb31 IP. In this + * case, if the IOC bit is not set, then delay by 1ms + * after issuing the EndTransfer command. This allows for the + * controller to handle the command completely before DWC3 + * remove requests attempts to unmap USB request buffers. + */ + + __dwc3_stop_active_transfer(dep, force, interrupt); +} + +static void dwc3_clear_stall_all_ep(struct dwc3 *dwc) +{ + u32 epnum; + + for (epnum = 1; epnum < DWC3_ENDPOINTS_NUM; epnum++) { + struct dwc3_ep *dep; + int ret; + + dep = dwc->eps[epnum]; + if (!dep) + continue; + + if (!(dep->flags & DWC3_EP_STALL)) + continue; + + dep->flags &= ~DWC3_EP_STALL; + + ret = dwc3_send_clear_stall_ep_cmd(dep); + WARN_ON_ONCE(ret); + } +} + +static void dwc3_gadget_disconnect_interrupt(struct dwc3 *dwc) +{ + int reg; + + dwc->suspended = false; + + dwc3_gadget_set_link_state(dwc, DWC3_LINK_STATE_RX_DET); + + reg = dwc3_readl(dwc->regs, DWC3_DCTL); + reg &= ~DWC3_DCTL_INITU1ENA; + reg &= ~DWC3_DCTL_INITU2ENA; + dwc3_gadget_dctl_write_safe(dwc, reg); + + dwc->connected = false; + + dwc3_disconnect_gadget(dwc); + + dwc->gadget->speed = USB_SPEED_UNKNOWN; + dwc->setup_packet_pending = false; + usb_gadget_set_state(dwc->gadget, USB_STATE_NOTATTACHED); + + dwc3_ep0_reset_state(dwc); + + /* + * Request PM idle to address condition where usage count is + * already decremented to zero, but waiting for the disconnect + * interrupt to set dwc->connected to FALSE. + */ + pm_request_idle(dwc->dev); +} + +static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc) +{ + u32 reg; + + dwc->suspended = false; + + /* + * Ideally, dwc3_reset_gadget() would trigger the function + * drivers to stop any active transfers through ep disable. + * However, for functions which defer ep disable, such as mass + * storage, we will need to rely on the call to stop active + * transfers here, and avoid allowing of request queuing. + */ + dwc->connected = false; + + /* + * WORKAROUND: DWC3 revisions <1.88a have an issue which + * would cause a missing Disconnect Event if there's a + * pending Setup Packet in the FIFO. + * + * There's no suggested workaround on the official Bug + * report, which states that "unless the driver/application + * is doing any special handling of a disconnect event, + * there is no functional issue". + * + * Unfortunately, it turns out that we _do_ some special + * handling of a disconnect event, namely complete all + * pending transfers, notify gadget driver of the + * disconnection, and so on. + * + * Our suggested workaround is to follow the Disconnect + * Event steps here, instead, based on a setup_packet_pending + * flag. Such flag gets set whenever we have a SETUP_PENDING + * status for EP0 TRBs and gets cleared on XferComplete for the + * same endpoint. + * + * Refers to: + * + * STAR#9000466709: RTL: Device : Disconnect event not + * generated if setup packet pending in FIFO + */ + if (DWC3_VER_IS_PRIOR(DWC3, 188A)) { + if (dwc->setup_packet_pending) + dwc3_gadget_disconnect_interrupt(dwc); + } + + dwc3_reset_gadget(dwc); + + /* + * From SNPS databook section 8.1.2, the EP0 should be in setup + * phase. So ensure that EP0 is in setup phase by issuing a stall + * and restart if EP0 is not in setup phase. + */ + dwc3_ep0_reset_state(dwc); + + /* + * In the Synopsis DesignWare Cores USB3 Databook Rev. 3.30a + * Section 4.1.2 Table 4-2, it states that during a USB reset, the SW + * needs to ensure that it sends "a DEPENDXFER command for any active + * transfers." + */ + dwc3_stop_active_transfers(dwc); + dwc->connected = true; + + reg = dwc3_readl(dwc->regs, DWC3_DCTL); + reg &= ~DWC3_DCTL_TSTCTRL_MASK; + dwc3_gadget_dctl_write_safe(dwc, reg); + dwc->test_mode = false; + dwc3_clear_stall_all_ep(dwc); + + /* Reset device address to zero */ + reg = dwc3_readl(dwc->regs, DWC3_DCFG); + reg &= ~(DWC3_DCFG_DEVADDR_MASK); + dwc3_writel(dwc->regs, DWC3_DCFG, reg); +} + +static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc) +{ + struct dwc3_ep *dep; + int ret; + u32 reg; + u8 lanes = 1; + u8 speed; + + if (!dwc->softconnect) + return; + + reg = dwc3_readl(dwc->regs, DWC3_DSTS); + speed = reg & DWC3_DSTS_CONNECTSPD; + dwc->speed = speed; + + if (DWC3_IP_IS(DWC32)) + lanes = DWC3_DSTS_CONNLANES(reg) + 1; + + dwc->gadget->ssp_rate = USB_SSP_GEN_UNKNOWN; + + /* + * RAMClkSel is reset to 0 after USB reset, so it must be reprogrammed + * each time on Connect Done. + * + * Currently we always use the reset value. If any platform + * wants to set this to a different value, we need to add a + * setting and update GCTL.RAMCLKSEL here. + */ + + switch (speed) { + case DWC3_DSTS_SUPERSPEED_PLUS: + dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512); + dwc->gadget->ep0->maxpacket = 512; + dwc->gadget->speed = USB_SPEED_SUPER_PLUS; + + if (lanes > 1) + dwc->gadget->ssp_rate = USB_SSP_GEN_2x2; + else + dwc->gadget->ssp_rate = USB_SSP_GEN_2x1; + break; + case DWC3_DSTS_SUPERSPEED: + /* + * WORKAROUND: DWC3 revisions <1.90a have an issue which + * would cause a missing USB3 Reset event. + * + * In such situations, we should force a USB3 Reset + * event by calling our dwc3_gadget_reset_interrupt() + * routine. + * + * Refers to: + * + * STAR#9000483510: RTL: SS : USB3 reset event may + * not be generated always when the link enters poll + */ + if (DWC3_VER_IS_PRIOR(DWC3, 190A)) + dwc3_gadget_reset_interrupt(dwc); + + dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512); + dwc->gadget->ep0->maxpacket = 512; + dwc->gadget->speed = USB_SPEED_SUPER; + + if (lanes > 1) { + dwc->gadget->speed = USB_SPEED_SUPER_PLUS; + dwc->gadget->ssp_rate = USB_SSP_GEN_1x2; + } + break; + case DWC3_DSTS_HIGHSPEED: + dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64); + dwc->gadget->ep0->maxpacket = 64; + dwc->gadget->speed = USB_SPEED_HIGH; + break; + case DWC3_DSTS_FULLSPEED: + dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64); + dwc->gadget->ep0->maxpacket = 64; + dwc->gadget->speed = USB_SPEED_FULL; + break; + } + + dwc->eps[1]->endpoint.maxpacket = dwc->gadget->ep0->maxpacket; + + /* Enable USB2 LPM Capability */ + + if (!DWC3_VER_IS_WITHIN(DWC3, ANY, 194A) && + !dwc->usb2_gadget_lpm_disable && + (speed != DWC3_DSTS_SUPERSPEED) && + (speed != DWC3_DSTS_SUPERSPEED_PLUS)) { + reg = dwc3_readl(dwc->regs, DWC3_DCFG); + reg |= DWC3_DCFG_LPM_CAP; + dwc3_writel(dwc->regs, DWC3_DCFG, reg); + + reg = dwc3_readl(dwc->regs, DWC3_DCTL); + reg &= ~(DWC3_DCTL_HIRD_THRES_MASK | DWC3_DCTL_L1_HIBER_EN); + + reg |= DWC3_DCTL_HIRD_THRES(dwc->hird_threshold | + (dwc->is_utmi_l1_suspend << 4)); + + /* + * When dwc3 revisions >= 2.40a, LPM Erratum is enabled and + * DCFG.LPMCap is set, core responses with an ACK and the + * BESL value in the LPM token is less than or equal to LPM + * NYET threshold. + */ + WARN_ONCE(DWC3_VER_IS_PRIOR(DWC3, 240A) && dwc->has_lpm_erratum, + "LPM Erratum not available on dwc3 revisions < 2.40a\n"); + + if (dwc->has_lpm_erratum && !DWC3_VER_IS_PRIOR(DWC3, 240A)) + reg |= DWC3_DCTL_NYET_THRES(dwc->lpm_nyet_threshold); + + dwc3_gadget_dctl_write_safe(dwc, reg); + } else { + if (dwc->usb2_gadget_lpm_disable) { + reg = dwc3_readl(dwc->regs, DWC3_DCFG); + reg &= ~DWC3_DCFG_LPM_CAP; + dwc3_writel(dwc->regs, DWC3_DCFG, reg); + } + + reg = dwc3_readl(dwc->regs, DWC3_DCTL); + reg &= ~DWC3_DCTL_HIRD_THRES_MASK; + dwc3_gadget_dctl_write_safe(dwc, reg); + } + + dep = dwc->eps[0]; + ret = __dwc3_gadget_ep_enable(dep, DWC3_DEPCFG_ACTION_MODIFY); + if (ret) { + dev_err(dwc->dev, "failed to enable %s\n", dep->name); + return; + } + + dep = dwc->eps[1]; + ret = __dwc3_gadget_ep_enable(dep, DWC3_DEPCFG_ACTION_MODIFY); + if (ret) { + dev_err(dwc->dev, "failed to enable %s\n", dep->name); + return; + } + + /* + * Configure PHY via GUSB3PIPECTLn if required. + * + * Update GTXFIFOSIZn + * + * In both cases reset values should be sufficient. + */ +} + +static void dwc3_gadget_wakeup_interrupt(struct dwc3 *dwc) +{ + dwc->suspended = false; + + /* + * TODO take core out of low power mode when that's + * implemented. + */ + + if (dwc->async_callbacks && dwc->gadget_driver->resume) { + spin_unlock(&dwc->lock); + dwc->gadget_driver->resume(dwc->gadget); + spin_lock(&dwc->lock); + } +} + +static void dwc3_gadget_linksts_change_interrupt(struct dwc3 *dwc, + unsigned int evtinfo) +{ + enum dwc3_link_state next = evtinfo & DWC3_LINK_STATE_MASK; + unsigned int pwropt; + + /* + * WORKAROUND: DWC3 < 2.50a have an issue when configured without + * Hibernation mode enabled which would show up when device detects + * host-initiated U3 exit. + * + * In that case, device will generate a Link State Change Interrupt + * from U3 to RESUME which is only necessary if Hibernation is + * configured in. + * + * There are no functional changes due to such spurious event and we + * just need to ignore it. + * + * Refers to: + * + * STAR#9000570034 RTL: SS Resume event generated in non-Hibernation + * operational mode + */ + pwropt = DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams1); + if (DWC3_VER_IS_PRIOR(DWC3, 250A) && + (pwropt != DWC3_GHWPARAMS1_EN_PWROPT_HIB)) { + if ((dwc->link_state == DWC3_LINK_STATE_U3) && + (next == DWC3_LINK_STATE_RESUME)) { + return; + } + } + + /* + * WORKAROUND: DWC3 Revisions <1.83a have an issue which, depending + * on the link partner, the USB session might do multiple entry/exit + * of low power states before a transfer takes place. + * + * Due to this problem, we might experience lower throughput. The + * suggested workaround is to disable DCTL[12:9] bits if we're + * transitioning from U1/U2 to U0 and enable those bits again + * after a transfer completes and there are no pending transfers + * on any of the enabled endpoints. + * + * This is the first half of that workaround. + * + * Refers to: + * + * STAR#9000446952: RTL: Device SS : if U1/U2 ->U0 takes >128us + * core send LGO_Ux entering U0 + */ + if (DWC3_VER_IS_PRIOR(DWC3, 183A)) { + if (next == DWC3_LINK_STATE_U0) { + u32 u1u2; + u32 reg; + + switch (dwc->link_state) { + case DWC3_LINK_STATE_U1: + case DWC3_LINK_STATE_U2: + reg = dwc3_readl(dwc->regs, DWC3_DCTL); + u1u2 = reg & (DWC3_DCTL_INITU2ENA + | DWC3_DCTL_ACCEPTU2ENA + | DWC3_DCTL_INITU1ENA + | DWC3_DCTL_ACCEPTU1ENA); + + if (!dwc->u1u2) + dwc->u1u2 = reg & u1u2; + + reg &= ~u1u2; + + dwc3_gadget_dctl_write_safe(dwc, reg); + break; + default: + /* do nothing */ + break; + } + } + } + + switch (next) { + case DWC3_LINK_STATE_U1: + if (dwc->speed == USB_SPEED_SUPER) + dwc3_suspend_gadget(dwc); + break; + case DWC3_LINK_STATE_U2: + case DWC3_LINK_STATE_U3: + dwc3_suspend_gadget(dwc); + break; + case DWC3_LINK_STATE_RESUME: + dwc3_resume_gadget(dwc); + break; + default: + /* do nothing */ + break; + } + + dwc->link_state = next; +} + +static void dwc3_gadget_suspend_interrupt(struct dwc3 *dwc, + unsigned int evtinfo) +{ + enum dwc3_link_state next = evtinfo & DWC3_LINK_STATE_MASK; + + if (!dwc->suspended && next == DWC3_LINK_STATE_U3) { + dwc->suspended = true; + dwc3_suspend_gadget(dwc); + } + + dwc->link_state = next; +} + +static void dwc3_gadget_interrupt(struct dwc3 *dwc, + const struct dwc3_event_devt *event) +{ + switch (event->type) { + case DWC3_DEVICE_EVENT_DISCONNECT: + dwc3_gadget_disconnect_interrupt(dwc); + break; + case DWC3_DEVICE_EVENT_RESET: + dwc3_gadget_reset_interrupt(dwc); + break; + case DWC3_DEVICE_EVENT_CONNECT_DONE: + dwc3_gadget_conndone_interrupt(dwc); + break; + case DWC3_DEVICE_EVENT_WAKEUP: + dwc3_gadget_wakeup_interrupt(dwc); + break; + case DWC3_DEVICE_EVENT_HIBER_REQ: + dev_WARN_ONCE(dwc->dev, true, "unexpected hibernation event\n"); + break; + case DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE: + dwc3_gadget_linksts_change_interrupt(dwc, event->event_info); + break; + case DWC3_DEVICE_EVENT_SUSPEND: + /* It changed to be suspend event for version 2.30a and above */ + if (!DWC3_VER_IS_PRIOR(DWC3, 230A)) + dwc3_gadget_suspend_interrupt(dwc, event->event_info); + break; + case DWC3_DEVICE_EVENT_SOF: + case DWC3_DEVICE_EVENT_ERRATIC_ERROR: + case DWC3_DEVICE_EVENT_CMD_CMPL: + case DWC3_DEVICE_EVENT_OVERFLOW: + break; + default: + dev_WARN(dwc->dev, "UNKNOWN IRQ %d\n", event->type); + } +} + +static void dwc3_process_event_entry(struct dwc3 *dwc, + const union dwc3_event *event) +{ + trace_dwc3_event(event->raw, dwc); + + if (!event->type.is_devspec) + dwc3_endpoint_interrupt(dwc, &event->depevt); + else if (event->type.type == DWC3_EVENT_TYPE_DEV) + dwc3_gadget_interrupt(dwc, &event->devt); + else + dev_err(dwc->dev, "UNKNOWN IRQ type %d\n", event->raw); +} + +static irqreturn_t dwc3_process_event_buf(struct dwc3_event_buffer *evt) +{ + struct dwc3 *dwc = evt->dwc; + irqreturn_t ret = IRQ_NONE; + int left; + + left = evt->count; + + if (!(evt->flags & DWC3_EVENT_PENDING)) + return IRQ_NONE; + + while (left > 0) { + union dwc3_event event; + + event.raw = *(u32 *) (evt->cache + evt->lpos); + + dwc3_process_event_entry(dwc, &event); + + /* + * FIXME we wrap around correctly to the next entry as + * almost all entries are 4 bytes in size. There is one + * entry which has 12 bytes which is a regular entry + * followed by 8 bytes data. ATM I don't know how + * things are organized if we get next to the a + * boundary so I worry about that once we try to handle + * that. + */ + evt->lpos = (evt->lpos + 4) % evt->length; + left -= 4; + } + + evt->count = 0; + ret = IRQ_HANDLED; + + /* Unmask interrupt */ + dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(0), + DWC3_GEVNTSIZ_SIZE(evt->length)); + + if (dwc->imod_interval) { + dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(0), DWC3_GEVNTCOUNT_EHB); + dwc3_writel(dwc->regs, DWC3_DEV_IMOD(0), dwc->imod_interval); + } + + /* Keep the clearing of DWC3_EVENT_PENDING at the end */ + evt->flags &= ~DWC3_EVENT_PENDING; + + return ret; +} + +static irqreturn_t dwc3_thread_interrupt(int irq, void *_evt) +{ + struct dwc3_event_buffer *evt = _evt; + struct dwc3 *dwc = evt->dwc; + unsigned long flags; + irqreturn_t ret = IRQ_NONE; + + local_bh_disable(); + spin_lock_irqsave(&dwc->lock, flags); + ret = dwc3_process_event_buf(evt); + spin_unlock_irqrestore(&dwc->lock, flags); + local_bh_enable(); + + return ret; +} + +static irqreturn_t dwc3_check_event_buf(struct dwc3_event_buffer *evt) +{ + struct dwc3 *dwc = evt->dwc; + u32 amount; + u32 count; + + if (pm_runtime_suspended(dwc->dev)) { + dwc->pending_events = true; + /* + * Trigger runtime resume. The get() function will be balanced + * after processing the pending events in dwc3_process_pending + * events(). + */ + pm_runtime_get(dwc->dev); + disable_irq_nosync(dwc->irq_gadget); + return IRQ_HANDLED; + } + + /* + * With PCIe legacy interrupt, test shows that top-half irq handler can + * be called again after HW interrupt deassertion. Check if bottom-half + * irq event handler completes before caching new event to prevent + * losing events. + */ + if (evt->flags & DWC3_EVENT_PENDING) + return IRQ_HANDLED; + + count = dwc3_readl(dwc->regs, DWC3_GEVNTCOUNT(0)); + count &= DWC3_GEVNTCOUNT_MASK; + if (!count) + return IRQ_NONE; + + evt->count = count; + evt->flags |= DWC3_EVENT_PENDING; + + /* Mask interrupt */ + dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(0), + DWC3_GEVNTSIZ_INTMASK | DWC3_GEVNTSIZ_SIZE(evt->length)); + + amount = min(count, evt->length - evt->lpos); + memcpy(evt->cache + evt->lpos, evt->buf + evt->lpos, amount); + + if (amount < count) + memcpy(evt->cache, evt->buf, count - amount); + + dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(0), count); + + return IRQ_WAKE_THREAD; +} + +static irqreturn_t dwc3_interrupt(int irq, void *_evt) +{ + struct dwc3_event_buffer *evt = _evt; + + return dwc3_check_event_buf(evt); +} + +static int dwc3_gadget_get_irq(struct dwc3 *dwc) +{ + struct platform_device *dwc3_pdev = to_platform_device(dwc->dev); + int irq; + + irq = platform_get_irq_byname_optional(dwc3_pdev, "peripheral"); + if (irq > 0) + goto out; + + if (irq == -EPROBE_DEFER) + goto out; + + irq = platform_get_irq_byname_optional(dwc3_pdev, "dwc_usb3"); + if (irq > 0) + goto out; + + if (irq == -EPROBE_DEFER) + goto out; + + irq = platform_get_irq(dwc3_pdev, 0); + if (irq > 0) + goto out; + + if (!irq) + irq = -EINVAL; + +out: + return irq; +} + +static void dwc_gadget_release(struct device *dev) +{ + struct usb_gadget *gadget = container_of(dev, struct usb_gadget, dev); + + kfree(gadget); +} + +/** + * dwc3_gadget_init - initializes gadget related registers + * @dwc: pointer to our controller context structure + * + * Returns 0 on success otherwise negative errno. + */ +int dwc3_gadget_init(struct dwc3 *dwc) +{ + int ret; + int irq; + struct device *dev; + + irq = dwc3_gadget_get_irq(dwc); + if (irq < 0) { + ret = irq; + goto err0; + } + + dwc->irq_gadget = irq; + + dwc->ep0_trb = dma_alloc_coherent(dwc->sysdev, + sizeof(*dwc->ep0_trb) * 2, + &dwc->ep0_trb_addr, GFP_KERNEL); + if (!dwc->ep0_trb) { + dev_err(dwc->dev, "failed to allocate ep0 trb\n"); + ret = -ENOMEM; + goto err0; + } + + dwc->setup_buf = kzalloc(DWC3_EP0_SETUP_SIZE, GFP_KERNEL); + if (!dwc->setup_buf) { + ret = -ENOMEM; + goto err1; + } + + dwc->bounce = dma_alloc_coherent(dwc->sysdev, DWC3_BOUNCE_SIZE, + &dwc->bounce_addr, GFP_KERNEL); + if (!dwc->bounce) { + ret = -ENOMEM; + goto err2; + } + + init_completion(&dwc->ep0_in_setup); + dwc->gadget = kzalloc(sizeof(struct usb_gadget), GFP_KERNEL); + if (!dwc->gadget) { + ret = -ENOMEM; + goto err3; + } + + + usb_initialize_gadget(dwc->dev, dwc->gadget, dwc_gadget_release); + dev = &dwc->gadget->dev; + dev->platform_data = dwc; + dwc->gadget->ops = &dwc3_gadget_ops; + dwc->gadget->speed = USB_SPEED_UNKNOWN; + dwc->gadget->ssp_rate = USB_SSP_GEN_UNKNOWN; + dwc->gadget->sg_supported = true; + dwc->gadget->name = "dwc3-gadget"; + dwc->gadget->lpm_capable = !dwc->usb2_gadget_lpm_disable; + + /* + * FIXME We might be setting max_speed to <SUPER, however versions + * <2.20a of dwc3 have an issue with metastability (documented + * elsewhere in this driver) which tells us we can't set max speed to + * anything lower than SUPER. + * + * Because gadget.max_speed is only used by composite.c and function + * drivers (i.e. it won't go into dwc3's registers) we are allowing this + * to happen so we avoid sending SuperSpeed Capability descriptor + * together with our BOS descriptor as that could confuse host into + * thinking we can handle super speed. + * + * Note that, in fact, we won't even support GetBOS requests when speed + * is less than super speed because we don't have means, yet, to tell + * composite.c that we are USB 2.0 + LPM ECN. + */ + if (DWC3_VER_IS_PRIOR(DWC3, 220A) && + !dwc->dis_metastability_quirk) + dev_info(dwc->dev, "changing max_speed on rev %08x\n", + dwc->revision); + + dwc->gadget->max_speed = dwc->maximum_speed; + dwc->gadget->max_ssp_rate = dwc->max_ssp_rate; + + /* + * REVISIT: Here we should clear all pending IRQs to be + * sure we're starting from a well known location. + */ + + ret = dwc3_gadget_init_endpoints(dwc, dwc->num_eps); + if (ret) + goto err4; + + ret = usb_add_gadget(dwc->gadget); + if (ret) { + dev_err(dwc->dev, "failed to add gadget\n"); + goto err5; + } + + if (DWC3_IP_IS(DWC32) && dwc->maximum_speed == USB_SPEED_SUPER_PLUS) + dwc3_gadget_set_ssp_rate(dwc->gadget, dwc->max_ssp_rate); + else + dwc3_gadget_set_speed(dwc->gadget, dwc->maximum_speed); + + return 0; + +err5: + dwc3_gadget_free_endpoints(dwc); +err4: + usb_put_gadget(dwc->gadget); + dwc->gadget = NULL; +err3: + dma_free_coherent(dwc->sysdev, DWC3_BOUNCE_SIZE, dwc->bounce, + dwc->bounce_addr); + +err2: + kfree(dwc->setup_buf); + +err1: + dma_free_coherent(dwc->sysdev, sizeof(*dwc->ep0_trb) * 2, + dwc->ep0_trb, dwc->ep0_trb_addr); + +err0: + return ret; +} + +/* -------------------------------------------------------------------------- */ + +void dwc3_gadget_exit(struct dwc3 *dwc) +{ + if (!dwc->gadget) + return; + + usb_del_gadget(dwc->gadget); + dwc3_gadget_free_endpoints(dwc); + usb_put_gadget(dwc->gadget); + dma_free_coherent(dwc->sysdev, DWC3_BOUNCE_SIZE, dwc->bounce, + dwc->bounce_addr); + kfree(dwc->setup_buf); + dma_free_coherent(dwc->sysdev, sizeof(*dwc->ep0_trb) * 2, + dwc->ep0_trb, dwc->ep0_trb_addr); +} + +int dwc3_gadget_suspend(struct dwc3 *dwc) +{ + unsigned long flags; + int ret; + + if (!dwc->gadget_driver) + return 0; + + ret = dwc3_gadget_soft_disconnect(dwc); + if (ret) + goto err; + + spin_lock_irqsave(&dwc->lock, flags); + dwc3_disconnect_gadget(dwc); + spin_unlock_irqrestore(&dwc->lock, flags); + + return 0; + +err: + /* + * Attempt to reset the controller's state. Likely no + * communication can be established until the host + * performs a port reset. + */ + if (dwc->softconnect) + dwc3_gadget_soft_connect(dwc); + + return ret; +} + +int dwc3_gadget_resume(struct dwc3 *dwc) +{ + if (!dwc->gadget_driver || !dwc->softconnect) + return 0; + + return dwc3_gadget_soft_connect(dwc); +} + +void dwc3_gadget_process_pending_events(struct dwc3 *dwc) +{ + if (dwc->pending_events) { + dwc3_interrupt(dwc->irq_gadget, dwc->ev_buf); + dwc3_thread_interrupt(dwc->irq_gadget, dwc->ev_buf); + pm_runtime_put(dwc->dev); + dwc->pending_events = false; + enable_irq(dwc->irq_gadget); + } +} |