summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host/uhci-hub.c
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--drivers/usb/host/uhci-hub.c421
1 files changed, 421 insertions, 0 deletions
diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c
new file mode 100644
index 000000000..47106dd8c
--- /dev/null
+++ b/drivers/usb/host/uhci-hub.c
@@ -0,0 +1,421 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Universal Host Controller Interface driver for USB.
+ *
+ * Maintainer: Alan Stern <stern@rowland.harvard.edu>
+ *
+ * (C) Copyright 1999 Linus Torvalds
+ * (C) Copyright 1999-2002 Johannes Erdfelt, johannes@erdfelt.com
+ * (C) Copyright 1999 Randy Dunlap
+ * (C) Copyright 1999 Georg Acher, acher@in.tum.de
+ * (C) Copyright 1999 Deti Fliegl, deti@fliegl.de
+ * (C) Copyright 1999 Thomas Sailer, sailer@ife.ee.ethz.ch
+ * (C) Copyright 2004 Alan Stern, stern@rowland.harvard.edu
+ */
+
+static const __u8 root_hub_hub_des[] =
+{
+ 0x09, /* __u8 bLength; */
+ USB_DT_HUB, /* __u8 bDescriptorType; Hub-descriptor */
+ 0x02, /* __u8 bNbrPorts; */
+ HUB_CHAR_NO_LPSM | /* __u16 wHubCharacteristics; */
+ HUB_CHAR_INDV_PORT_OCPM, /* (per-port OC, no power switching) */
+ 0x00,
+ 0x01, /* __u8 bPwrOn2pwrGood; 2ms */
+ 0x00, /* __u8 bHubContrCurrent; 0 mA */
+ 0x00, /* __u8 DeviceRemovable; *** 7 Ports max */
+ 0xff /* __u8 PortPwrCtrlMask; *** 7 ports max */
+};
+
+#define UHCI_RH_MAXCHILD 7
+
+/* must write as zeroes */
+#define WZ_BITS (USBPORTSC_RES2 | USBPORTSC_RES3 | USBPORTSC_RES4)
+
+/* status change bits: nonzero writes will clear */
+#define RWC_BITS (USBPORTSC_OCC | USBPORTSC_PEC | USBPORTSC_CSC)
+
+/* suspend/resume bits: port suspended or port resuming */
+#define SUSPEND_BITS (USBPORTSC_SUSP | USBPORTSC_RD)
+
+/* A port that either is connected or has a changed-bit set will prevent
+ * us from AUTO_STOPPING.
+ */
+static int any_ports_active(struct uhci_hcd *uhci)
+{
+ int port;
+
+ for (port = 0; port < uhci->rh_numports; ++port) {
+ if ((uhci_readw(uhci, USBPORTSC1 + port * 2) &
+ (USBPORTSC_CCS | RWC_BITS)) ||
+ test_bit(port, &uhci->port_c_suspend))
+ return 1;
+ }
+ return 0;
+}
+
+static inline int get_hub_status_data(struct uhci_hcd *uhci, char *buf)
+{
+ int port;
+ int mask = RWC_BITS;
+
+ /* Some boards (both VIA and Intel apparently) report bogus
+ * overcurrent indications, causing massive log spam unless
+ * we completely ignore them. This doesn't seem to be a problem
+ * with the chipset so much as with the way it is connected on
+ * the motherboard; if the overcurrent input is left to float
+ * then it may constantly register false positives. */
+ if (ignore_oc)
+ mask &= ~USBPORTSC_OCC;
+
+ *buf = 0;
+ for (port = 0; port < uhci->rh_numports; ++port) {
+ if ((uhci_readw(uhci, USBPORTSC1 + port * 2) & mask) ||
+ test_bit(port, &uhci->port_c_suspend))
+ *buf |= (1 << (port + 1));
+ }
+ return !!*buf;
+}
+
+#define CLR_RH_PORTSTAT(x) \
+ status = uhci_readw(uhci, port_addr); \
+ status &= ~(RWC_BITS|WZ_BITS); \
+ status &= ~(x); \
+ status |= RWC_BITS & (x); \
+ uhci_writew(uhci, status, port_addr)
+
+#define SET_RH_PORTSTAT(x) \
+ status = uhci_readw(uhci, port_addr); \
+ status |= (x); \
+ status &= ~(RWC_BITS|WZ_BITS); \
+ uhci_writew(uhci, status, port_addr)
+
+/* UHCI controllers don't automatically stop resume signalling after 20 msec,
+ * so we have to poll and check timeouts in order to take care of it.
+ */
+static void uhci_finish_suspend(struct uhci_hcd *uhci, int port,
+ unsigned long port_addr)
+{
+ int status;
+ int i;
+
+ if (uhci_readw(uhci, port_addr) & SUSPEND_BITS) {
+ CLR_RH_PORTSTAT(SUSPEND_BITS);
+ if (test_bit(port, &uhci->resuming_ports))
+ set_bit(port, &uhci->port_c_suspend);
+
+ /* The controller won't actually turn off the RD bit until
+ * it has had a chance to send a low-speed EOP sequence,
+ * which is supposed to take 3 bit times (= 2 microseconds).
+ * Experiments show that some controllers take longer, so
+ * we'll poll for completion. */
+ for (i = 0; i < 10; ++i) {
+ if (!(uhci_readw(uhci, port_addr) & SUSPEND_BITS))
+ break;
+ udelay(1);
+ }
+ }
+ clear_bit(port, &uhci->resuming_ports);
+ usb_hcd_end_port_resume(&uhci_to_hcd(uhci)->self, port);
+}
+
+/* Wait for the UHCI controller in HP's iLO2 server management chip.
+ * It can take up to 250 us to finish a reset and set the CSC bit.
+ */
+static void wait_for_HP(struct uhci_hcd *uhci, unsigned long port_addr)
+{
+ int i;
+
+ for (i = 10; i < 250; i += 10) {
+ if (uhci_readw(uhci, port_addr) & USBPORTSC_CSC)
+ return;
+ udelay(10);
+ }
+ /* Log a warning? */
+}
+
+static void uhci_check_ports(struct uhci_hcd *uhci)
+{
+ unsigned int port;
+ unsigned long port_addr;
+ int status;
+
+ for (port = 0; port < uhci->rh_numports; ++port) {
+ port_addr = USBPORTSC1 + 2 * port;
+ status = uhci_readw(uhci, port_addr);
+ if (unlikely(status & USBPORTSC_PR)) {
+ if (time_after_eq(jiffies, uhci->ports_timeout)) {
+ CLR_RH_PORTSTAT(USBPORTSC_PR);
+ udelay(10);
+
+ /* HP's server management chip requires
+ * a longer delay. */
+ if (uhci->wait_for_hp)
+ wait_for_HP(uhci, port_addr);
+
+ /* If the port was enabled before, turning
+ * reset on caused a port enable change.
+ * Turning reset off causes a port connect
+ * status change. Clear these changes. */
+ CLR_RH_PORTSTAT(USBPORTSC_CSC | USBPORTSC_PEC);
+ SET_RH_PORTSTAT(USBPORTSC_PE);
+ }
+ }
+ if (unlikely(status & USBPORTSC_RD)) {
+ if (!test_bit(port, &uhci->resuming_ports)) {
+
+ /* Port received a wakeup request */
+ set_bit(port, &uhci->resuming_ports);
+ uhci->ports_timeout = jiffies +
+ msecs_to_jiffies(USB_RESUME_TIMEOUT);
+ usb_hcd_start_port_resume(
+ &uhci_to_hcd(uhci)->self, port);
+
+ /* Make sure we see the port again
+ * after the resuming period is over. */
+ mod_timer(&uhci_to_hcd(uhci)->rh_timer,
+ uhci->ports_timeout);
+ } else if (time_after_eq(jiffies,
+ uhci->ports_timeout)) {
+ uhci_finish_suspend(uhci, port, port_addr);
+ }
+ }
+ }
+}
+
+static int uhci_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+ struct uhci_hcd *uhci = hcd_to_uhci(hcd);
+ unsigned long flags;
+ int status = 0;
+
+ spin_lock_irqsave(&uhci->lock, flags);
+
+ uhci_scan_schedule(uhci);
+ if (!HCD_HW_ACCESSIBLE(hcd) || uhci->dead)
+ goto done;
+ uhci_check_ports(uhci);
+
+ status = get_hub_status_data(uhci, buf);
+
+ switch (uhci->rh_state) {
+ case UHCI_RH_SUSPENDED:
+ /* if port change, ask to be resumed */
+ if (status || uhci->resuming_ports) {
+ status = 1;
+ usb_hcd_resume_root_hub(hcd);
+ }
+ break;
+
+ case UHCI_RH_AUTO_STOPPED:
+ /* if port change, auto start */
+ if (status)
+ wakeup_rh(uhci);
+ break;
+
+ case UHCI_RH_RUNNING:
+ /* are any devices attached? */
+ if (!any_ports_active(uhci)) {
+ uhci->rh_state = UHCI_RH_RUNNING_NODEVS;
+ uhci->auto_stop_time = jiffies + HZ;
+ }
+ break;
+
+ case UHCI_RH_RUNNING_NODEVS:
+ /* auto-stop if nothing connected for 1 second */
+ if (any_ports_active(uhci))
+ uhci->rh_state = UHCI_RH_RUNNING;
+ else if (time_after_eq(jiffies, uhci->auto_stop_time) &&
+ !uhci->wait_for_hp)
+ suspend_rh(uhci, UHCI_RH_AUTO_STOPPED);
+ break;
+
+ default:
+ break;
+ }
+
+done:
+ spin_unlock_irqrestore(&uhci->lock, flags);
+ return status;
+}
+
+/* size of returned buffer is part of USB spec */
+static int uhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+ u16 wIndex, char *buf, u16 wLength)
+{
+ struct uhci_hcd *uhci = hcd_to_uhci(hcd);
+ int status, lstatus, retval = 0;
+ unsigned int port = wIndex - 1;
+ unsigned long port_addr = USBPORTSC1 + 2 * port;
+ u16 wPortChange, wPortStatus;
+ unsigned long flags;
+
+ if (!HCD_HW_ACCESSIBLE(hcd) || uhci->dead)
+ return -ETIMEDOUT;
+
+ spin_lock_irqsave(&uhci->lock, flags);
+ switch (typeReq) {
+
+ case GetHubStatus:
+ *(__le32 *)buf = cpu_to_le32(0);
+ retval = 4; /* hub power */
+ break;
+ case GetPortStatus:
+ if (port >= uhci->rh_numports)
+ goto err;
+
+ uhci_check_ports(uhci);
+ status = uhci_readw(uhci, port_addr);
+
+ /* Intel controllers report the OverCurrent bit active on.
+ * VIA controllers report it active off, so we'll adjust the
+ * bit value. (It's not standardized in the UHCI spec.)
+ */
+ if (uhci->oc_low)
+ status ^= USBPORTSC_OC;
+
+ /* UHCI doesn't support C_RESET (always false) */
+ wPortChange = lstatus = 0;
+ if (status & USBPORTSC_CSC)
+ wPortChange |= USB_PORT_STAT_C_CONNECTION;
+ if (status & USBPORTSC_PEC)
+ wPortChange |= USB_PORT_STAT_C_ENABLE;
+ if ((status & USBPORTSC_OCC) && !ignore_oc)
+ wPortChange |= USB_PORT_STAT_C_OVERCURRENT;
+
+ if (test_bit(port, &uhci->port_c_suspend)) {
+ wPortChange |= USB_PORT_STAT_C_SUSPEND;
+ lstatus |= 1;
+ }
+ if (test_bit(port, &uhci->resuming_ports))
+ lstatus |= 4;
+
+ /* UHCI has no power switching (always on) */
+ wPortStatus = USB_PORT_STAT_POWER;
+ if (status & USBPORTSC_CCS)
+ wPortStatus |= USB_PORT_STAT_CONNECTION;
+ if (status & USBPORTSC_PE) {
+ wPortStatus |= USB_PORT_STAT_ENABLE;
+ if (status & SUSPEND_BITS)
+ wPortStatus |= USB_PORT_STAT_SUSPEND;
+ }
+ if (status & USBPORTSC_OC)
+ wPortStatus |= USB_PORT_STAT_OVERCURRENT;
+ if (status & USBPORTSC_PR)
+ wPortStatus |= USB_PORT_STAT_RESET;
+ if (status & USBPORTSC_LSDA)
+ wPortStatus |= USB_PORT_STAT_LOW_SPEED;
+
+ if (wPortChange)
+ dev_dbg(uhci_dev(uhci), "port %d portsc %04x,%02x\n",
+ wIndex, status, lstatus);
+
+ *(__le16 *)buf = cpu_to_le16(wPortStatus);
+ *(__le16 *)(buf + 2) = cpu_to_le16(wPortChange);
+ retval = 4;
+ break;
+ case SetHubFeature: /* We don't implement these */
+ case ClearHubFeature:
+ switch (wValue) {
+ case C_HUB_OVER_CURRENT:
+ case C_HUB_LOCAL_POWER:
+ break;
+ default:
+ goto err;
+ }
+ break;
+ case SetPortFeature:
+ if (port >= uhci->rh_numports)
+ goto err;
+
+ switch (wValue) {
+ case USB_PORT_FEAT_SUSPEND:
+ SET_RH_PORTSTAT(USBPORTSC_SUSP);
+ break;
+ case USB_PORT_FEAT_RESET:
+ SET_RH_PORTSTAT(USBPORTSC_PR);
+
+ /* Reset terminates Resume signalling */
+ uhci_finish_suspend(uhci, port, port_addr);
+
+ /* USB v2.0 7.1.7.5 */
+ uhci->ports_timeout = jiffies +
+ msecs_to_jiffies(USB_RESUME_TIMEOUT);
+ break;
+ case USB_PORT_FEAT_POWER:
+ /* UHCI has no power switching */
+ break;
+ default:
+ goto err;
+ }
+ break;
+ case ClearPortFeature:
+ if (port >= uhci->rh_numports)
+ goto err;
+
+ switch (wValue) {
+ case USB_PORT_FEAT_ENABLE:
+ CLR_RH_PORTSTAT(USBPORTSC_PE);
+
+ /* Disable terminates Resume signalling */
+ uhci_finish_suspend(uhci, port, port_addr);
+ break;
+ case USB_PORT_FEAT_C_ENABLE:
+ CLR_RH_PORTSTAT(USBPORTSC_PEC);
+ break;
+ case USB_PORT_FEAT_SUSPEND:
+ if (!(uhci_readw(uhci, port_addr) & USBPORTSC_SUSP)) {
+
+ /* Make certain the port isn't suspended */
+ uhci_finish_suspend(uhci, port, port_addr);
+ } else if (!test_and_set_bit(port,
+ &uhci->resuming_ports)) {
+ SET_RH_PORTSTAT(USBPORTSC_RD);
+
+ /* The controller won't allow RD to be set
+ * if the port is disabled. When this happens
+ * just skip the Resume signalling.
+ */
+ if (!(uhci_readw(uhci, port_addr) &
+ USBPORTSC_RD))
+ uhci_finish_suspend(uhci, port,
+ port_addr);
+ else
+ /* USB v2.0 7.1.7.7 */
+ uhci->ports_timeout = jiffies +
+ msecs_to_jiffies(20);
+ }
+ break;
+ case USB_PORT_FEAT_C_SUSPEND:
+ clear_bit(port, &uhci->port_c_suspend);
+ break;
+ case USB_PORT_FEAT_POWER:
+ /* UHCI has no power switching */
+ goto err;
+ case USB_PORT_FEAT_C_CONNECTION:
+ CLR_RH_PORTSTAT(USBPORTSC_CSC);
+ break;
+ case USB_PORT_FEAT_C_OVER_CURRENT:
+ CLR_RH_PORTSTAT(USBPORTSC_OCC);
+ break;
+ case USB_PORT_FEAT_C_RESET:
+ /* this driver won't report these */
+ break;
+ default:
+ goto err;
+ }
+ break;
+ case GetHubDescriptor:
+ retval = min_t(unsigned int, sizeof(root_hub_hub_des), wLength);
+ memcpy(buf, root_hub_hub_des, retval);
+ if (retval > 2)
+ buf[2] = uhci->rh_numports;
+ break;
+ default:
+err:
+ retval = -EPIPE;
+ }
+ spin_unlock_irqrestore(&uhci->lock, flags);
+
+ return retval;
+}
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-03 04:06:21 +0000