diff options
Diffstat (limited to 'drivers/usb/renesas_usbhs/common.c')
| -rw-r--r-- | drivers/usb/renesas_usbhs/common.c | 836 |
1 files changed, 836 insertions, 0 deletions
diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c new file mode 100644 index 000000000..96f3939a6 --- /dev/null +++ b/drivers/usb/renesas_usbhs/common.c @@ -0,0 +1,836 @@ +// SPDX-License-Identifier: GPL-1.0+ +/* + * Renesas USB driver + * + * Copyright (C) 2011 Renesas Solutions Corp. + * Copyright (C) 2019 Renesas Electronics Corporation + * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> + */ +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/gpio/consumer.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/pm_runtime.h> +#include <linux/reset.h> +#include <linux/slab.h> +#include <linux/sysfs.h> +#include "common.h" +#include "rcar2.h" +#include "rcar3.h" +#include "rza.h" + +/* + * image of renesas_usbhs + * + * ex) gadget case + + * mod.c + * mod_gadget.c + * mod_host.c pipe.c fifo.c + * + * +-------+ +-----------+ + * | pipe0 |------>| fifo pio | + * +------------+ +-------+ +-----------+ + * | mod_gadget |=====> | pipe1 |--+ + * +------------+ +-------+ | +-----------+ + * | pipe2 | | +-| fifo dma0 | + * +------------+ +-------+ | | +-----------+ + * | mod_host | | pipe3 |<-|--+ + * +------------+ +-------+ | +-----------+ + * | .... | +--->| fifo dma1 | + * | .... | +-----------+ + */ + +/* + * platform call back + * + * renesas usb support platform callback function. + * Below macro call it. + * if platform doesn't have callback, it return 0 (no error) + */ +#define usbhs_platform_call(priv, func, args...)\ + (!(priv) ? -ENODEV : \ + !((priv)->pfunc->func) ? 0 : \ + (priv)->pfunc->func(args)) + +/* + * common functions + */ +u16 usbhs_read(struct usbhs_priv *priv, u32 reg) +{ + return ioread16(priv->base + reg); +} + +void usbhs_write(struct usbhs_priv *priv, u32 reg, u16 data) +{ + iowrite16(data, priv->base + reg); +} + +void usbhs_bset(struct usbhs_priv *priv, u32 reg, u16 mask, u16 data) +{ + u16 val = usbhs_read(priv, reg); + + val &= ~mask; + val |= data & mask; + + usbhs_write(priv, reg, val); +} + +struct usbhs_priv *usbhs_pdev_to_priv(struct platform_device *pdev) +{ + return dev_get_drvdata(&pdev->dev); +} + +int usbhs_get_id_as_gadget(struct platform_device *pdev) +{ + return USBHS_GADGET; +} + +/* + * syscfg functions + */ +static void usbhs_sys_clock_ctrl(struct usbhs_priv *priv, int enable) +{ + usbhs_bset(priv, SYSCFG, SCKE, enable ? SCKE : 0); +} + +void usbhs_sys_host_ctrl(struct usbhs_priv *priv, int enable) +{ + u16 mask = DCFM | DRPD | DPRPU | HSE | USBE; + u16 val = DCFM | DRPD | HSE | USBE; + + /* + * if enable + * + * - select Host mode + * - D+ Line/D- Line Pull-down + */ + usbhs_bset(priv, SYSCFG, mask, enable ? val : 0); +} + +void usbhs_sys_function_ctrl(struct usbhs_priv *priv, int enable) +{ + u16 mask = DCFM | DRPD | DPRPU | HSE | USBE; + u16 val = HSE | USBE; + + /* CNEN bit is required for function operation */ + if (usbhs_get_dparam(priv, has_cnen)) { + mask |= CNEN; + val |= CNEN; + } + + /* + * if enable + * + * - select Function mode + * - D+ Line Pull-up is disabled + * When D+ Line Pull-up is enabled, + * calling usbhs_sys_function_pullup(,1) + */ + usbhs_bset(priv, SYSCFG, mask, enable ? val : 0); +} + +void usbhs_sys_function_pullup(struct usbhs_priv *priv, int enable) +{ + usbhs_bset(priv, SYSCFG, DPRPU, enable ? DPRPU : 0); +} + +void usbhs_sys_set_test_mode(struct usbhs_priv *priv, u16 mode) +{ + usbhs_write(priv, TESTMODE, mode); +} + +/* + * frame functions + */ +int usbhs_frame_get_num(struct usbhs_priv *priv) +{ + return usbhs_read(priv, FRMNUM) & FRNM_MASK; +} + +/* + * usb request functions + */ +void usbhs_usbreq_get_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req) +{ + u16 val; + + val = usbhs_read(priv, USBREQ); + req->bRequest = (val >> 8) & 0xFF; + req->bRequestType = (val >> 0) & 0xFF; + + req->wValue = cpu_to_le16(usbhs_read(priv, USBVAL)); + req->wIndex = cpu_to_le16(usbhs_read(priv, USBINDX)); + req->wLength = cpu_to_le16(usbhs_read(priv, USBLENG)); +} + +void usbhs_usbreq_set_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req) +{ + usbhs_write(priv, USBREQ, (req->bRequest << 8) | req->bRequestType); + usbhs_write(priv, USBVAL, le16_to_cpu(req->wValue)); + usbhs_write(priv, USBINDX, le16_to_cpu(req->wIndex)); + usbhs_write(priv, USBLENG, le16_to_cpu(req->wLength)); + + usbhs_bset(priv, DCPCTR, SUREQ, SUREQ); +} + +/* + * bus/vbus functions + */ +void usbhs_bus_send_sof_enable(struct usbhs_priv *priv) +{ + u16 status = usbhs_read(priv, DVSTCTR) & (USBRST | UACT); + + if (status != USBRST) { + struct device *dev = usbhs_priv_to_dev(priv); + dev_err(dev, "usbhs should be reset\n"); + } + + usbhs_bset(priv, DVSTCTR, (USBRST | UACT), UACT); +} + +void usbhs_bus_send_reset(struct usbhs_priv *priv) +{ + usbhs_bset(priv, DVSTCTR, (USBRST | UACT), USBRST); +} + +int usbhs_bus_get_speed(struct usbhs_priv *priv) +{ + u16 dvstctr = usbhs_read(priv, DVSTCTR); + + switch (RHST & dvstctr) { + case RHST_LOW_SPEED: + return USB_SPEED_LOW; + case RHST_FULL_SPEED: + return USB_SPEED_FULL; + case RHST_HIGH_SPEED: + return USB_SPEED_HIGH; + } + + return USB_SPEED_UNKNOWN; +} + +int usbhs_vbus_ctrl(struct usbhs_priv *priv, int enable) +{ + struct platform_device *pdev = usbhs_priv_to_pdev(priv); + + return usbhs_platform_call(priv, set_vbus, pdev, enable); +} + +static void usbhsc_bus_init(struct usbhs_priv *priv) +{ + usbhs_write(priv, DVSTCTR, 0); + + usbhs_vbus_ctrl(priv, 0); +} + +/* + * device configuration + */ +int usbhs_set_device_config(struct usbhs_priv *priv, int devnum, + u16 upphub, u16 hubport, u16 speed) +{ + struct device *dev = usbhs_priv_to_dev(priv); + u16 usbspd = 0; + u32 reg = DEVADD0 + (2 * devnum); + + if (devnum > 10) { + dev_err(dev, "cannot set speed to unknown device %d\n", devnum); + return -EIO; + } + + if (upphub > 0xA) { + dev_err(dev, "unsupported hub number %d\n", upphub); + return -EIO; + } + + switch (speed) { + case USB_SPEED_LOW: + usbspd = USBSPD_SPEED_LOW; + break; + case USB_SPEED_FULL: + usbspd = USBSPD_SPEED_FULL; + break; + case USB_SPEED_HIGH: + usbspd = USBSPD_SPEED_HIGH; + break; + default: + dev_err(dev, "unsupported speed %d\n", speed); + return -EIO; + } + + usbhs_write(priv, reg, UPPHUB(upphub) | + HUBPORT(hubport)| + USBSPD(usbspd)); + + return 0; +} + +/* + * interrupt functions + */ +void usbhs_xxxsts_clear(struct usbhs_priv *priv, u16 sts_reg, u16 bit) +{ + u16 pipe_mask = (u16)GENMASK(usbhs_get_dparam(priv, pipe_size), 0); + + usbhs_write(priv, sts_reg, ~(1 << bit) & pipe_mask); +} + +/* + * local functions + */ +static void usbhsc_set_buswait(struct usbhs_priv *priv) +{ + int wait = usbhs_get_dparam(priv, buswait_bwait); + + /* set bus wait if platform have */ + if (wait) + usbhs_bset(priv, BUSWAIT, 0x000F, wait); +} + +static bool usbhsc_is_multi_clks(struct usbhs_priv *priv) +{ + return priv->dparam.multi_clks; +} + +static int usbhsc_clk_get(struct device *dev, struct usbhs_priv *priv) +{ + if (!usbhsc_is_multi_clks(priv)) + return 0; + + /* The first clock should exist */ + priv->clks[0] = of_clk_get(dev_of_node(dev), 0); + if (IS_ERR(priv->clks[0])) + return PTR_ERR(priv->clks[0]); + + /* + * To backward compatibility with old DT, this driver checks the return + * value if it's -ENOENT or not. + */ + priv->clks[1] = of_clk_get(dev_of_node(dev), 1); + if (PTR_ERR(priv->clks[1]) == -ENOENT) + priv->clks[1] = NULL; + else if (IS_ERR(priv->clks[1])) + return PTR_ERR(priv->clks[1]); + + return 0; +} + +static void usbhsc_clk_put(struct usbhs_priv *priv) +{ + int i; + + if (!usbhsc_is_multi_clks(priv)) + return; + + for (i = 0; i < ARRAY_SIZE(priv->clks); i++) + clk_put(priv->clks[i]); +} + +static int usbhsc_clk_prepare_enable(struct usbhs_priv *priv) +{ + int i, ret; + + if (!usbhsc_is_multi_clks(priv)) + return 0; + + for (i = 0; i < ARRAY_SIZE(priv->clks); i++) { + ret = clk_prepare_enable(priv->clks[i]); + if (ret) { + while (--i >= 0) + clk_disable_unprepare(priv->clks[i]); + return ret; + } + } + + return ret; +} + +static void usbhsc_clk_disable_unprepare(struct usbhs_priv *priv) +{ + int i; + + if (!usbhsc_is_multi_clks(priv)) + return; + + for (i = 0; i < ARRAY_SIZE(priv->clks); i++) + clk_disable_unprepare(priv->clks[i]); +} + +/* + * platform default param + */ + +/* commonly used on old SH-Mobile SoCs */ +static struct renesas_usbhs_driver_pipe_config usbhsc_default_pipe[] = { + RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_CONTROL, 64, 0x00, false), + RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_ISOC, 1024, 0x08, false), + RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_ISOC, 1024, 0x18, false), + RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x28, true), + RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x38, true), + RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x48, true), + RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x04, false), + RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x05, false), + RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x06, false), + RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x07, false), +}; + +/* commonly used on newer SH-Mobile and R-Car SoCs */ +static struct renesas_usbhs_driver_pipe_config usbhsc_new_pipe[] = { + RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_CONTROL, 64, 0x00, false), + RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_ISOC, 1024, 0x08, true), + RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_ISOC, 1024, 0x28, true), + RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x48, true), + RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x58, true), + RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x68, true), + RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x04, false), + RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x05, false), + RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x06, false), + RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x78, true), + RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x88, true), + RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x98, true), + RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0xa8, true), + RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0xb8, true), + RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0xc8, true), + RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0xd8, true), +}; + +/* + * power control + */ +static void usbhsc_power_ctrl(struct usbhs_priv *priv, int enable) +{ + struct platform_device *pdev = usbhs_priv_to_pdev(priv); + struct device *dev = usbhs_priv_to_dev(priv); + + if (enable) { + /* enable PM */ + pm_runtime_get_sync(dev); + + /* enable clks */ + if (usbhsc_clk_prepare_enable(priv)) + return; + + /* enable platform power */ + usbhs_platform_call(priv, power_ctrl, pdev, priv->base, enable); + + /* USB on */ + usbhs_sys_clock_ctrl(priv, enable); + } else { + /* USB off */ + usbhs_sys_clock_ctrl(priv, enable); + + /* disable platform power */ + usbhs_platform_call(priv, power_ctrl, pdev, priv->base, enable); + + /* disable clks */ + usbhsc_clk_disable_unprepare(priv); + + /* disable PM */ + pm_runtime_put_sync(dev); + } +} + +/* + * hotplug + */ +static void usbhsc_hotplug(struct usbhs_priv *priv) +{ + struct platform_device *pdev = usbhs_priv_to_pdev(priv); + struct usbhs_mod *mod = usbhs_mod_get_current(priv); + int id; + int enable; + int cable; + int ret; + + /* + * get vbus status from platform + */ + enable = usbhs_mod_info_call(priv, get_vbus, pdev); + + /* + * get id from platform + */ + id = usbhs_platform_call(priv, get_id, pdev); + + if (enable && !mod) { + if (priv->edev) { + cable = extcon_get_state(priv->edev, EXTCON_USB_HOST); + if ((cable > 0 && id != USBHS_HOST) || + (!cable && id != USBHS_GADGET)) { + dev_info(&pdev->dev, + "USB cable plugged in doesn't match the selected role!\n"); + return; + } + } + + ret = usbhs_mod_change(priv, id); + if (ret < 0) + return; + + dev_dbg(&pdev->dev, "%s enable\n", __func__); + + /* power on */ + if (usbhs_get_dparam(priv, runtime_pwctrl)) + usbhsc_power_ctrl(priv, enable); + + /* bus init */ + usbhsc_set_buswait(priv); + usbhsc_bus_init(priv); + + /* module start */ + usbhs_mod_call(priv, start, priv); + + } else if (!enable && mod) { + dev_dbg(&pdev->dev, "%s disable\n", __func__); + + /* module stop */ + usbhs_mod_call(priv, stop, priv); + + /* bus init */ + usbhsc_bus_init(priv); + + /* power off */ + if (usbhs_get_dparam(priv, runtime_pwctrl)) + usbhsc_power_ctrl(priv, enable); + + usbhs_mod_change(priv, -1); + + /* reset phy for next connection */ + usbhs_platform_call(priv, phy_reset, pdev); + } +} + +/* + * notify hotplug + */ +static void usbhsc_notify_hotplug(struct work_struct *work) +{ + struct usbhs_priv *priv = container_of(work, + struct usbhs_priv, + notify_hotplug_work.work); + usbhsc_hotplug(priv); +} + +int usbhsc_schedule_notify_hotplug(struct platform_device *pdev) +{ + struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev); + int delay = usbhs_get_dparam(priv, detection_delay); + + /* + * This functions will be called in interrupt. + * To make sure safety context, + * use workqueue for usbhs_notify_hotplug + */ + schedule_delayed_work(&priv->notify_hotplug_work, + msecs_to_jiffies(delay)); + return 0; +} + +/* + * platform functions + */ +static const struct of_device_id usbhs_of_match[] = { + { + .compatible = "renesas,usbhs-r8a774c0", + .data = &usbhs_rcar_gen3_with_pll_plat_info, + }, + { + .compatible = "renesas,usbhs-r8a7790", + .data = &usbhs_rcar_gen2_plat_info, + }, + { + .compatible = "renesas,usbhs-r8a7791", + .data = &usbhs_rcar_gen2_plat_info, + }, + { + .compatible = "renesas,usbhs-r8a7794", + .data = &usbhs_rcar_gen2_plat_info, + }, + { + .compatible = "renesas,usbhs-r8a7795", + .data = &usbhs_rcar_gen3_plat_info, + }, + { + .compatible = "renesas,usbhs-r8a7796", + .data = &usbhs_rcar_gen3_plat_info, + }, + { + .compatible = "renesas,usbhs-r8a77990", + .data = &usbhs_rcar_gen3_with_pll_plat_info, + }, + { + .compatible = "renesas,usbhs-r8a77995", + .data = &usbhs_rcar_gen3_with_pll_plat_info, + }, + { + .compatible = "renesas,rcar-gen2-usbhs", + .data = &usbhs_rcar_gen2_plat_info, + }, + { + .compatible = "renesas,rcar-gen3-usbhs", + .data = &usbhs_rcar_gen3_plat_info, + }, + { + .compatible = "renesas,rza1-usbhs", + .data = &usbhs_rza1_plat_info, + }, + { + .compatible = "renesas,rza2-usbhs", + .data = &usbhs_rza2_plat_info, + }, + { }, +}; +MODULE_DEVICE_TABLE(of, usbhs_of_match); + +static int usbhs_probe(struct platform_device *pdev) +{ + const struct renesas_usbhs_platform_info *info; + struct usbhs_priv *priv; + struct device *dev = &pdev->dev; + struct gpio_desc *gpiod; + int ret; + u32 tmp; + int irq; + + /* check device node */ + if (dev_of_node(dev)) + info = of_device_get_match_data(dev); + else + info = renesas_usbhs_get_info(pdev); + + /* check platform information */ + if (!info) { + dev_err(dev, "no platform information\n"); + return -EINVAL; + } + + /* platform data */ + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + /* usb private data */ + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(priv->base)) + return PTR_ERR(priv->base); + + if (of_property_read_bool(dev_of_node(dev), "extcon")) { + priv->edev = extcon_get_edev_by_phandle(dev, 0); + if (IS_ERR(priv->edev)) + return PTR_ERR(priv->edev); + } + + priv->rsts = devm_reset_control_array_get_optional_shared(dev); + if (IS_ERR(priv->rsts)) + return PTR_ERR(priv->rsts); + + /* + * care platform info + */ + + priv->dparam = info->driver_param; + + if (!info->platform_callback.get_id) { + dev_err(dev, "no platform callbacks\n"); + return -EINVAL; + } + priv->pfunc = &info->platform_callback; + + /* set default param if platform doesn't have */ + if (usbhs_get_dparam(priv, has_new_pipe_configs)) { + priv->dparam.pipe_configs = usbhsc_new_pipe; + priv->dparam.pipe_size = ARRAY_SIZE(usbhsc_new_pipe); + } else if (!priv->dparam.pipe_configs) { + priv->dparam.pipe_configs = usbhsc_default_pipe; + priv->dparam.pipe_size = ARRAY_SIZE(usbhsc_default_pipe); + } + if (!priv->dparam.pio_dma_border) + priv->dparam.pio_dma_border = 64; /* 64byte */ + if (!of_property_read_u32(dev_of_node(dev), "renesas,buswait", &tmp)) + priv->dparam.buswait_bwait = tmp; + gpiod = devm_gpiod_get_optional(dev, "renesas,enable", GPIOD_IN); + if (IS_ERR(gpiod)) + return PTR_ERR(gpiod); + + /* FIXME */ + /* runtime power control ? */ + if (priv->pfunc->get_vbus) + usbhs_get_dparam(priv, runtime_pwctrl) = 1; + + /* + * priv settings + */ + priv->irq = irq; + priv->pdev = pdev; + INIT_DELAYED_WORK(&priv->notify_hotplug_work, usbhsc_notify_hotplug); + spin_lock_init(usbhs_priv_to_lock(priv)); + + /* call pipe and module init */ + ret = usbhs_pipe_probe(priv); + if (ret < 0) + return ret; + + ret = usbhs_fifo_probe(priv); + if (ret < 0) + goto probe_end_pipe_exit; + + ret = usbhs_mod_probe(priv); + if (ret < 0) + goto probe_end_fifo_exit; + + /* dev_set_drvdata should be called after usbhs_mod_init */ + platform_set_drvdata(pdev, priv); + + ret = reset_control_deassert(priv->rsts); + if (ret) + goto probe_fail_rst; + + ret = usbhsc_clk_get(dev, priv); + if (ret) + goto probe_fail_clks; + + /* + * deviece reset here because + * USB device might be used in boot loader. + */ + usbhs_sys_clock_ctrl(priv, 0); + + /* check GPIO determining if USB function should be enabled */ + if (gpiod) { + ret = !gpiod_get_value(gpiod); + if (ret) { + dev_warn(dev, "USB function not selected (GPIO)\n"); + ret = -ENOTSUPP; + goto probe_end_mod_exit; + } + } + + /* + * platform call + * + * USB phy setup might depend on CPU/Board. + * If platform has its callback functions, + * call it here. + */ + ret = usbhs_platform_call(priv, hardware_init, pdev); + if (ret < 0) { + dev_err(dev, "platform init failed.\n"); + goto probe_end_mod_exit; + } + + /* reset phy for connection */ + usbhs_platform_call(priv, phy_reset, pdev); + + /* power control */ + pm_runtime_enable(dev); + if (!usbhs_get_dparam(priv, runtime_pwctrl)) { + usbhsc_power_ctrl(priv, 1); + usbhs_mod_autonomy_mode(priv); + } else { + usbhs_mod_non_autonomy_mode(priv); + } + + /* + * manual call notify_hotplug for cold plug + */ + usbhsc_schedule_notify_hotplug(pdev); + + dev_info(dev, "probed\n"); + + return ret; + +probe_end_mod_exit: + usbhsc_clk_put(priv); +probe_fail_clks: + reset_control_assert(priv->rsts); +probe_fail_rst: + usbhs_mod_remove(priv); +probe_end_fifo_exit: + usbhs_fifo_remove(priv); +probe_end_pipe_exit: + usbhs_pipe_remove(priv); + + dev_info(dev, "probe failed (%d)\n", ret); + + return ret; +} + +static int usbhs_remove(struct platform_device *pdev) +{ + struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev); + + dev_dbg(&pdev->dev, "usb remove\n"); + + /* power off */ + if (!usbhs_get_dparam(priv, runtime_pwctrl)) + usbhsc_power_ctrl(priv, 0); + + pm_runtime_disable(&pdev->dev); + + usbhs_platform_call(priv, hardware_exit, pdev); + usbhsc_clk_put(priv); + reset_control_assert(priv->rsts); + usbhs_mod_remove(priv); + usbhs_fifo_remove(priv); + usbhs_pipe_remove(priv); + + return 0; +} + +static __maybe_unused int usbhsc_suspend(struct device *dev) +{ + struct usbhs_priv *priv = dev_get_drvdata(dev); + struct usbhs_mod *mod = usbhs_mod_get_current(priv); + + if (mod) { + usbhs_mod_call(priv, stop, priv); + usbhs_mod_change(priv, -1); + } + + if (mod || !usbhs_get_dparam(priv, runtime_pwctrl)) + usbhsc_power_ctrl(priv, 0); + + return 0; +} + +static __maybe_unused int usbhsc_resume(struct device *dev) +{ + struct usbhs_priv *priv = dev_get_drvdata(dev); + struct platform_device *pdev = usbhs_priv_to_pdev(priv); + + if (!usbhs_get_dparam(priv, runtime_pwctrl)) { + usbhsc_power_ctrl(priv, 1); + usbhs_mod_autonomy_mode(priv); + } + + usbhs_platform_call(priv, phy_reset, pdev); + + usbhsc_schedule_notify_hotplug(pdev); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(usbhsc_pm_ops, usbhsc_suspend, usbhsc_resume); + +static struct platform_driver renesas_usbhs_driver = { + .driver = { + .name = "renesas_usbhs", + .pm = &usbhsc_pm_ops, + .of_match_table = of_match_ptr(usbhs_of_match), + }, + .probe = usbhs_probe, + .remove = usbhs_remove, +}; + +module_platform_driver(renesas_usbhs_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Renesas USB driver"); +MODULE_AUTHOR("Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>"); |