diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/usb/serial/f81232.c | 1063 |
1 files changed, 1063 insertions, 0 deletions
diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c new file mode 100644 index 000000000..891fb1fe6 --- /dev/null +++ b/drivers/usb/serial/f81232.c @@ -0,0 +1,1063 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Fintek F81232 USB to serial adaptor driver + * Fintek F81532A/534A/535/536 USB to 2/4/8/12 serial adaptor driver + * + * Copyright (C) 2012 Greg Kroah-Hartman (gregkh@linuxfoundation.org) + * Copyright (C) 2012 Linux Foundation + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <linux/serial.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/mutex.h> +#include <linux/uaccess.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> +#include <linux/serial_reg.h> + +#define F81232_ID \ + { USB_DEVICE(0x1934, 0x0706) } /* 1 port UART device */ + +#define F81534A_SERIES_ID \ + { USB_DEVICE(0x2c42, 0x1602) }, /* In-Box 2 port UART device */ \ + { USB_DEVICE(0x2c42, 0x1604) }, /* In-Box 4 port UART device */ \ + { USB_DEVICE(0x2c42, 0x1605) }, /* In-Box 8 port UART device */ \ + { USB_DEVICE(0x2c42, 0x1606) }, /* In-Box 12 port UART device */ \ + { USB_DEVICE(0x2c42, 0x1608) }, /* Non-Flash type */ \ + { USB_DEVICE(0x2c42, 0x1632) }, /* 2 port UART device */ \ + { USB_DEVICE(0x2c42, 0x1634) }, /* 4 port UART device */ \ + { USB_DEVICE(0x2c42, 0x1635) }, /* 8 port UART device */ \ + { USB_DEVICE(0x2c42, 0x1636) } /* 12 port UART device */ + +#define F81534A_CTRL_ID \ + { USB_DEVICE(0x2c42, 0x16f8) } /* Global control device */ + +static const struct usb_device_id f81232_id_table[] = { + F81232_ID, + { } /* Terminating entry */ +}; + +static const struct usb_device_id f81534a_id_table[] = { + F81534A_SERIES_ID, + { } /* Terminating entry */ +}; + +static const struct usb_device_id f81534a_ctrl_id_table[] = { + F81534A_CTRL_ID, + { } /* Terminating entry */ +}; + +static const struct usb_device_id combined_id_table[] = { + F81232_ID, + F81534A_SERIES_ID, + F81534A_CTRL_ID, + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, combined_id_table); + +/* Maximum baudrate for F81232 */ +#define F81232_MAX_BAUDRATE 1500000 +#define F81232_DEF_BAUDRATE 9600 + +/* USB Control EP parameter */ +#define F81232_REGISTER_REQUEST 0xa0 +#define F81232_GET_REGISTER 0xc0 +#define F81232_SET_REGISTER 0x40 +#define F81534A_ACCESS_REG_RETRY 2 + +#define SERIAL_BASE_ADDRESS 0x0120 +#define RECEIVE_BUFFER_REGISTER (0x00 + SERIAL_BASE_ADDRESS) +#define INTERRUPT_ENABLE_REGISTER (0x01 + SERIAL_BASE_ADDRESS) +#define FIFO_CONTROL_REGISTER (0x02 + SERIAL_BASE_ADDRESS) +#define LINE_CONTROL_REGISTER (0x03 + SERIAL_BASE_ADDRESS) +#define MODEM_CONTROL_REGISTER (0x04 + SERIAL_BASE_ADDRESS) +#define LINE_STATUS_REGISTER (0x05 + SERIAL_BASE_ADDRESS) +#define MODEM_STATUS_REGISTER (0x06 + SERIAL_BASE_ADDRESS) + +/* + * F81232 Clock registers (106h) + * + * Bit1-0: Clock source selector + * 00: 1.846MHz. + * 01: 18.46MHz. + * 10: 24MHz. + * 11: 14.77MHz. + */ +#define F81232_CLK_REGISTER 0x106 +#define F81232_CLK_1_846_MHZ 0 +#define F81232_CLK_18_46_MHZ BIT(0) +#define F81232_CLK_24_MHZ BIT(1) +#define F81232_CLK_14_77_MHZ (BIT(1) | BIT(0)) +#define F81232_CLK_MASK GENMASK(1, 0) + +#define F81534A_MODE_REG 0x107 +#define F81534A_TRIGGER_MASK GENMASK(3, 2) +#define F81534A_TRIGGER_MULTIPLE_4X BIT(3) +#define F81534A_FIFO_128BYTE (BIT(1) | BIT(0)) + +/* Serial port self GPIO control, 2bytes [control&output data][input data] */ +#define F81534A_GPIO_REG 0x10e +#define F81534A_GPIO_MODE2_DIR BIT(6) /* 1: input, 0: output */ +#define F81534A_GPIO_MODE1_DIR BIT(5) +#define F81534A_GPIO_MODE0_DIR BIT(4) +#define F81534A_GPIO_MODE2_OUTPUT BIT(2) +#define F81534A_GPIO_MODE1_OUTPUT BIT(1) +#define F81534A_GPIO_MODE0_OUTPUT BIT(0) + +#define F81534A_CTRL_CMD_ENABLE_PORT 0x116 + +struct f81232_private { + struct mutex lock; + u8 modem_control; + u8 modem_status; + u8 shadow_lcr; + speed_t baud_base; + struct work_struct lsr_work; + struct work_struct interrupt_work; + struct usb_serial_port *port; +}; + +static u32 const baudrate_table[] = { 115200, 921600, 1152000, 1500000 }; +static u8 const clock_table[] = { F81232_CLK_1_846_MHZ, F81232_CLK_14_77_MHZ, + F81232_CLK_18_46_MHZ, F81232_CLK_24_MHZ }; + +static int calc_baud_divisor(speed_t baudrate, speed_t clockrate) +{ + return DIV_ROUND_CLOSEST(clockrate, baudrate); +} + +static int f81232_get_register(struct usb_serial_port *port, u16 reg, u8 *val) +{ + int status; + struct usb_device *dev = port->serial->dev; + + status = usb_control_msg_recv(dev, + 0, + F81232_REGISTER_REQUEST, + F81232_GET_REGISTER, + reg, + 0, + val, + sizeof(*val), + USB_CTRL_GET_TIMEOUT, + GFP_KERNEL); + if (status) { + dev_err(&port->dev, "%s failed status: %d\n", __func__, status); + status = usb_translate_errors(status); + } + + return status; +} + +static int f81232_set_register(struct usb_serial_port *port, u16 reg, u8 val) +{ + int status; + struct usb_device *dev = port->serial->dev; + + status = usb_control_msg_send(dev, + 0, + F81232_REGISTER_REQUEST, + F81232_SET_REGISTER, + reg, + 0, + &val, + sizeof(val), + USB_CTRL_SET_TIMEOUT, + GFP_KERNEL); + if (status) { + dev_err(&port->dev, "%s failed status: %d\n", __func__, status); + status = usb_translate_errors(status); + } + + return status; +} + +static int f81232_set_mask_register(struct usb_serial_port *port, u16 reg, + u8 mask, u8 val) +{ + int status; + u8 tmp; + + status = f81232_get_register(port, reg, &tmp); + if (status) + return status; + + tmp = (tmp & ~mask) | (val & mask); + + return f81232_set_register(port, reg, tmp); +} + +static void f81232_read_msr(struct usb_serial_port *port) +{ + int status; + u8 current_msr; + struct tty_struct *tty; + struct f81232_private *priv = usb_get_serial_port_data(port); + + mutex_lock(&priv->lock); + status = f81232_get_register(port, MODEM_STATUS_REGISTER, + ¤t_msr); + if (status) { + dev_err(&port->dev, "%s fail, status: %d\n", __func__, status); + mutex_unlock(&priv->lock); + return; + } + + if (!(current_msr & UART_MSR_ANY_DELTA)) { + mutex_unlock(&priv->lock); + return; + } + + priv->modem_status = current_msr; + + if (current_msr & UART_MSR_DCTS) + port->icount.cts++; + if (current_msr & UART_MSR_DDSR) + port->icount.dsr++; + if (current_msr & UART_MSR_TERI) + port->icount.rng++; + if (current_msr & UART_MSR_DDCD) { + port->icount.dcd++; + tty = tty_port_tty_get(&port->port); + if (tty) { + usb_serial_handle_dcd_change(port, tty, + current_msr & UART_MSR_DCD); + + tty_kref_put(tty); + } + } + + wake_up_interruptible(&port->port.delta_msr_wait); + mutex_unlock(&priv->lock); +} + +static int f81232_set_mctrl(struct usb_serial_port *port, + unsigned int set, unsigned int clear) +{ + u8 val; + int status; + struct f81232_private *priv = usb_get_serial_port_data(port); + + if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) + return 0; /* no change */ + + /* 'set' takes precedence over 'clear' */ + clear &= ~set; + + /* force enable interrupt with OUT2 */ + mutex_lock(&priv->lock); + val = UART_MCR_OUT2 | priv->modem_control; + + if (clear & TIOCM_DTR) + val &= ~UART_MCR_DTR; + + if (clear & TIOCM_RTS) + val &= ~UART_MCR_RTS; + + if (set & TIOCM_DTR) + val |= UART_MCR_DTR; + + if (set & TIOCM_RTS) + val |= UART_MCR_RTS; + + dev_dbg(&port->dev, "%s new:%02x old:%02x\n", __func__, + val, priv->modem_control); + + status = f81232_set_register(port, MODEM_CONTROL_REGISTER, val); + if (status) { + dev_err(&port->dev, "%s set MCR status < 0\n", __func__); + mutex_unlock(&priv->lock); + return status; + } + + priv->modem_control = val; + mutex_unlock(&priv->lock); + + return 0; +} + +static void f81232_update_line_status(struct usb_serial_port *port, + unsigned char *data, + size_t actual_length) +{ + struct f81232_private *priv = usb_get_serial_port_data(port); + + if (!actual_length) + return; + + switch (data[0] & 0x07) { + case 0x00: /* msr change */ + dev_dbg(&port->dev, "IIR: MSR Change: %02x\n", data[0]); + schedule_work(&priv->interrupt_work); + break; + case 0x02: /* tx-empty */ + break; + case 0x04: /* rx data available */ + break; + case 0x06: /* lsr change */ + /* we can forget it. the LSR will read from bulk-in */ + dev_dbg(&port->dev, "IIR: LSR Change: %02x\n", data[0]); + break; + } +} + +static void f81232_read_int_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + unsigned char *data = urb->transfer_buffer; + unsigned int actual_length = urb->actual_length; + int status = urb->status; + int retval; + + switch (status) { + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n", + __func__, status); + return; + default: + dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n", + __func__, status); + goto exit; + } + + usb_serial_debug_data(&port->dev, __func__, + urb->actual_length, urb->transfer_buffer); + + f81232_update_line_status(port, data, actual_length); + +exit: + retval = usb_submit_urb(urb, GFP_ATOMIC); + if (retval) + dev_err(&urb->dev->dev, + "%s - usb_submit_urb failed with result %d\n", + __func__, retval); +} + +static char f81232_handle_lsr(struct usb_serial_port *port, u8 lsr) +{ + struct f81232_private *priv = usb_get_serial_port_data(port); + char tty_flag = TTY_NORMAL; + + if (!(lsr & UART_LSR_BRK_ERROR_BITS)) + return tty_flag; + + if (lsr & UART_LSR_BI) { + tty_flag = TTY_BREAK; + port->icount.brk++; + usb_serial_handle_break(port); + } else if (lsr & UART_LSR_PE) { + tty_flag = TTY_PARITY; + port->icount.parity++; + } else if (lsr & UART_LSR_FE) { + tty_flag = TTY_FRAME; + port->icount.frame++; + } + + if (lsr & UART_LSR_OE) { + port->icount.overrun++; + schedule_work(&priv->lsr_work); + tty_insert_flip_char(&port->port, 0, TTY_OVERRUN); + } + + return tty_flag; +} + +static void f81232_process_read_urb(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + unsigned char *data = urb->transfer_buffer; + char tty_flag; + unsigned int i; + u8 lsr; + + /* + * When opening the port we get a 1-byte packet with the current LSR, + * which we discard. + */ + if ((urb->actual_length < 2) || (urb->actual_length % 2)) + return; + + /* bulk-in data: [LSR(1Byte)+DATA(1Byte)][LSR(1Byte)+DATA(1Byte)]... */ + + for (i = 0; i < urb->actual_length; i += 2) { + lsr = data[i]; + tty_flag = f81232_handle_lsr(port, lsr); + + if (port->sysrq) { + if (usb_serial_handle_sysrq_char(port, data[i + 1])) + continue; + } + + tty_insert_flip_char(&port->port, data[i + 1], tty_flag); + } + + tty_flip_buffer_push(&port->port); +} + +static void f81534a_process_read_urb(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + unsigned char *data = urb->transfer_buffer; + char tty_flag; + unsigned int i; + u8 lsr; + u8 len; + + if (urb->actual_length < 3) { + dev_err(&port->dev, "short message received: %d\n", + urb->actual_length); + return; + } + + len = data[0]; + if (len != urb->actual_length) { + dev_err(&port->dev, "malformed message received: %d (%d)\n", + urb->actual_length, len); + return; + } + + /* bulk-in data: [LEN][Data.....][LSR] */ + lsr = data[len - 1]; + tty_flag = f81232_handle_lsr(port, lsr); + + if (port->sysrq) { + for (i = 1; i < len - 1; ++i) { + if (!usb_serial_handle_sysrq_char(port, data[i])) { + tty_insert_flip_char(&port->port, data[i], + tty_flag); + } + } + } else { + tty_insert_flip_string_fixed_flag(&port->port, &data[1], + tty_flag, len - 2); + } + + tty_flip_buffer_push(&port->port); +} + +static void f81232_break_ctl(struct tty_struct *tty, int break_state) +{ + struct usb_serial_port *port = tty->driver_data; + struct f81232_private *priv = usb_get_serial_port_data(port); + int status; + + mutex_lock(&priv->lock); + + if (break_state) + priv->shadow_lcr |= UART_LCR_SBC; + else + priv->shadow_lcr &= ~UART_LCR_SBC; + + status = f81232_set_register(port, LINE_CONTROL_REGISTER, + priv->shadow_lcr); + if (status) + dev_err(&port->dev, "set break failed: %d\n", status); + + mutex_unlock(&priv->lock); +} + +static int f81232_find_clk(speed_t baudrate) +{ + int idx; + + for (idx = 0; idx < ARRAY_SIZE(baudrate_table); ++idx) { + if (baudrate <= baudrate_table[idx] && + baudrate_table[idx] % baudrate == 0) + return idx; + } + + return -EINVAL; +} + +static void f81232_set_baudrate(struct tty_struct *tty, + struct usb_serial_port *port, speed_t baudrate, + speed_t old_baudrate) +{ + struct f81232_private *priv = usb_get_serial_port_data(port); + u8 lcr; + int divisor; + int status = 0; + int i; + int idx; + speed_t baud_list[] = { baudrate, old_baudrate, F81232_DEF_BAUDRATE }; + + for (i = 0; i < ARRAY_SIZE(baud_list); ++i) { + baudrate = baud_list[i]; + if (baudrate == 0) { + tty_encode_baud_rate(tty, 0, 0); + return; + } + + idx = f81232_find_clk(baudrate); + if (idx >= 0) { + tty_encode_baud_rate(tty, baudrate, baudrate); + break; + } + } + + if (idx < 0) + return; + + priv->baud_base = baudrate_table[idx]; + divisor = calc_baud_divisor(baudrate, priv->baud_base); + + status = f81232_set_mask_register(port, F81232_CLK_REGISTER, + F81232_CLK_MASK, clock_table[idx]); + if (status) { + dev_err(&port->dev, "%s failed to set CLK_REG: %d\n", + __func__, status); + return; + } + + status = f81232_get_register(port, LINE_CONTROL_REGISTER, + &lcr); /* get LCR */ + if (status) { + dev_err(&port->dev, "%s failed to get LCR: %d\n", + __func__, status); + return; + } + + status = f81232_set_register(port, LINE_CONTROL_REGISTER, + lcr | UART_LCR_DLAB); /* Enable DLAB */ + if (status) { + dev_err(&port->dev, "%s failed to set DLAB: %d\n", + __func__, status); + return; + } + + status = f81232_set_register(port, RECEIVE_BUFFER_REGISTER, + divisor & 0x00ff); /* low */ + if (status) { + dev_err(&port->dev, "%s failed to set baudrate MSB: %d\n", + __func__, status); + goto reapply_lcr; + } + + status = f81232_set_register(port, INTERRUPT_ENABLE_REGISTER, + (divisor & 0xff00) >> 8); /* high */ + if (status) { + dev_err(&port->dev, "%s failed to set baudrate LSB: %d\n", + __func__, status); + } + +reapply_lcr: + status = f81232_set_register(port, LINE_CONTROL_REGISTER, + lcr & ~UART_LCR_DLAB); + if (status) { + dev_err(&port->dev, "%s failed to set DLAB: %d\n", + __func__, status); + } +} + +static int f81232_port_enable(struct usb_serial_port *port) +{ + u8 val; + int status; + + /* fifo on, trigger8, clear TX/RX*/ + val = UART_FCR_TRIGGER_8 | UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | + UART_FCR_CLEAR_XMIT; + + status = f81232_set_register(port, FIFO_CONTROL_REGISTER, val); + if (status) { + dev_err(&port->dev, "%s failed to set FCR: %d\n", + __func__, status); + return status; + } + + /* MSR Interrupt only, LSR will read from Bulk-in odd byte */ + status = f81232_set_register(port, INTERRUPT_ENABLE_REGISTER, + UART_IER_MSI); + if (status) { + dev_err(&port->dev, "%s failed to set IER: %d\n", + __func__, status); + return status; + } + + return 0; +} + +static int f81232_port_disable(struct usb_serial_port *port) +{ + int status; + + status = f81232_set_register(port, INTERRUPT_ENABLE_REGISTER, 0); + if (status) { + dev_err(&port->dev, "%s failed to set IER: %d\n", + __func__, status); + return status; + } + + return 0; +} + +static void f81232_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, + const struct ktermios *old_termios) +{ + struct f81232_private *priv = usb_get_serial_port_data(port); + u8 new_lcr = 0; + int status = 0; + speed_t baudrate; + speed_t old_baud; + + /* Don't change anything if nothing has changed */ + if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios)) + return; + + if (C_BAUD(tty) == B0) + f81232_set_mctrl(port, 0, TIOCM_DTR | TIOCM_RTS); + else if (old_termios && (old_termios->c_cflag & CBAUD) == B0) + f81232_set_mctrl(port, TIOCM_DTR | TIOCM_RTS, 0); + + baudrate = tty_get_baud_rate(tty); + if (baudrate > 0) { + if (old_termios) + old_baud = tty_termios_baud_rate(old_termios); + else + old_baud = F81232_DEF_BAUDRATE; + + f81232_set_baudrate(tty, port, baudrate, old_baud); + } + + if (C_PARENB(tty)) { + new_lcr |= UART_LCR_PARITY; + + if (!C_PARODD(tty)) + new_lcr |= UART_LCR_EPAR; + + if (C_CMSPAR(tty)) + new_lcr |= UART_LCR_SPAR; + } + + if (C_CSTOPB(tty)) + new_lcr |= UART_LCR_STOP; + + new_lcr |= UART_LCR_WLEN(tty_get_char_size(tty->termios.c_cflag)); + + mutex_lock(&priv->lock); + + new_lcr |= (priv->shadow_lcr & UART_LCR_SBC); + status = f81232_set_register(port, LINE_CONTROL_REGISTER, new_lcr); + if (status) { + dev_err(&port->dev, "%s failed to set LCR: %d\n", + __func__, status); + } + + priv->shadow_lcr = new_lcr; + + mutex_unlock(&priv->lock); +} + +static int f81232_tiocmget(struct tty_struct *tty) +{ + int r; + struct usb_serial_port *port = tty->driver_data; + struct f81232_private *port_priv = usb_get_serial_port_data(port); + u8 mcr, msr; + + /* force get current MSR changed state */ + f81232_read_msr(port); + + mutex_lock(&port_priv->lock); + mcr = port_priv->modem_control; + msr = port_priv->modem_status; + mutex_unlock(&port_priv->lock); + + r = (mcr & UART_MCR_DTR ? TIOCM_DTR : 0) | + (mcr & UART_MCR_RTS ? TIOCM_RTS : 0) | + (msr & UART_MSR_CTS ? TIOCM_CTS : 0) | + (msr & UART_MSR_DCD ? TIOCM_CAR : 0) | + (msr & UART_MSR_RI ? TIOCM_RI : 0) | + (msr & UART_MSR_DSR ? TIOCM_DSR : 0); + + return r; +} + +static int f81232_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct usb_serial_port *port = tty->driver_data; + + return f81232_set_mctrl(port, set, clear); +} + +static int f81232_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + int result; + + result = f81232_port_enable(port); + if (result) + return result; + + /* Setup termios */ + if (tty) + f81232_set_termios(tty, port, NULL); + + result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); + if (result) { + dev_err(&port->dev, "%s - failed submitting interrupt urb," + " error %d\n", __func__, result); + return result; + } + + result = usb_serial_generic_open(tty, port); + if (result) { + usb_kill_urb(port->interrupt_in_urb); + return result; + } + + return 0; +} + +static int f81534a_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + int status; + u8 mask; + u8 val; + + val = F81534A_TRIGGER_MULTIPLE_4X | F81534A_FIFO_128BYTE; + mask = F81534A_TRIGGER_MASK | F81534A_FIFO_128BYTE; + + status = f81232_set_mask_register(port, F81534A_MODE_REG, mask, val); + if (status) { + dev_err(&port->dev, "failed to set MODE_REG: %d\n", status); + return status; + } + + return f81232_open(tty, port); +} + +static void f81232_close(struct usb_serial_port *port) +{ + struct f81232_private *port_priv = usb_get_serial_port_data(port); + + f81232_port_disable(port); + usb_serial_generic_close(port); + usb_kill_urb(port->interrupt_in_urb); + flush_work(&port_priv->interrupt_work); + flush_work(&port_priv->lsr_work); +} + +static void f81232_dtr_rts(struct usb_serial_port *port, int on) +{ + if (on) + f81232_set_mctrl(port, TIOCM_DTR | TIOCM_RTS, 0); + else + f81232_set_mctrl(port, 0, TIOCM_DTR | TIOCM_RTS); +} + +static bool f81232_tx_empty(struct usb_serial_port *port) +{ + int status; + u8 tmp; + + status = f81232_get_register(port, LINE_STATUS_REGISTER, &tmp); + if (!status) { + if ((tmp & UART_LSR_TEMT) != UART_LSR_TEMT) + return false; + } + + return true; +} + +static int f81232_carrier_raised(struct usb_serial_port *port) +{ + u8 msr; + struct f81232_private *priv = usb_get_serial_port_data(port); + + mutex_lock(&priv->lock); + msr = priv->modem_status; + mutex_unlock(&priv->lock); + + if (msr & UART_MSR_DCD) + return 1; + return 0; +} + +static void f81232_get_serial(struct tty_struct *tty, struct serial_struct *ss) +{ + struct usb_serial_port *port = tty->driver_data; + struct f81232_private *priv = usb_get_serial_port_data(port); + + ss->baud_base = priv->baud_base; +} + +static void f81232_interrupt_work(struct work_struct *work) +{ + struct f81232_private *priv = + container_of(work, struct f81232_private, interrupt_work); + + f81232_read_msr(priv->port); +} + +static void f81232_lsr_worker(struct work_struct *work) +{ + struct f81232_private *priv; + struct usb_serial_port *port; + int status; + u8 tmp; + + priv = container_of(work, struct f81232_private, lsr_work); + port = priv->port; + + status = f81232_get_register(port, LINE_STATUS_REGISTER, &tmp); + if (status) + dev_warn(&port->dev, "read LSR failed: %d\n", status); +} + +static int f81534a_ctrl_set_register(struct usb_interface *intf, u16 reg, + u16 size, void *val) +{ + struct usb_device *dev = interface_to_usbdev(intf); + int retry = F81534A_ACCESS_REG_RETRY; + int status; + + while (retry--) { + status = usb_control_msg_send(dev, + 0, + F81232_REGISTER_REQUEST, + F81232_SET_REGISTER, + reg, + 0, + val, + size, + USB_CTRL_SET_TIMEOUT, + GFP_KERNEL); + if (status) { + status = usb_translate_errors(status); + if (status == -EIO) + continue; + } + + break; + } + + if (status) { + dev_err(&intf->dev, "failed to set register 0x%x: %d\n", + reg, status); + } + + return status; +} + +static int f81534a_ctrl_enable_all_ports(struct usb_interface *intf, bool en) +{ + unsigned char enable[2] = {0}; + int status; + + /* + * Enable all available serial ports, define as following: + * bit 15 : Reset behavior (when HUB got soft reset) + * 0: maintain all serial port enabled state. + * 1: disable all serial port. + * bit 0~11 : Serial port enable bit. + */ + if (en) { + enable[0] = 0xff; + enable[1] = 0x8f; + } + + status = f81534a_ctrl_set_register(intf, F81534A_CTRL_CMD_ENABLE_PORT, + sizeof(enable), enable); + if (status) + dev_err(&intf->dev, "failed to enable ports: %d\n", status); + + return status; +} + +static int f81534a_ctrl_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + return f81534a_ctrl_enable_all_ports(intf, true); +} + +static void f81534a_ctrl_disconnect(struct usb_interface *intf) +{ + f81534a_ctrl_enable_all_ports(intf, false); +} + +static int f81534a_ctrl_resume(struct usb_interface *intf) +{ + return f81534a_ctrl_enable_all_ports(intf, true); +} + +static int f81232_port_probe(struct usb_serial_port *port) +{ + struct f81232_private *priv; + + priv = devm_kzalloc(&port->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + mutex_init(&priv->lock); + INIT_WORK(&priv->interrupt_work, f81232_interrupt_work); + INIT_WORK(&priv->lsr_work, f81232_lsr_worker); + + usb_set_serial_port_data(port, priv); + + priv->port = port; + + return 0; +} + +static int f81534a_port_probe(struct usb_serial_port *port) +{ + int status; + + /* tri-state with pull-high, default RS232 Mode */ + status = f81232_set_register(port, F81534A_GPIO_REG, + F81534A_GPIO_MODE2_DIR); + if (status) + return status; + + return f81232_port_probe(port); +} + +static int f81232_suspend(struct usb_serial *serial, pm_message_t message) +{ + struct usb_serial_port *port = serial->port[0]; + struct f81232_private *port_priv = usb_get_serial_port_data(port); + int i; + + for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i) + usb_kill_urb(port->read_urbs[i]); + + usb_kill_urb(port->interrupt_in_urb); + + if (port_priv) { + flush_work(&port_priv->interrupt_work); + flush_work(&port_priv->lsr_work); + } + + return 0; +} + +static int f81232_resume(struct usb_serial *serial) +{ + struct usb_serial_port *port = serial->port[0]; + int result; + + if (tty_port_initialized(&port->port)) { + result = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO); + if (result) { + dev_err(&port->dev, "submit interrupt urb failed: %d\n", + result); + return result; + } + } + + return usb_serial_generic_resume(serial); +} + +static struct usb_serial_driver f81232_device = { + .driver = { + .owner = THIS_MODULE, + .name = "f81232", + }, + .id_table = f81232_id_table, + .num_ports = 1, + .bulk_in_size = 256, + .bulk_out_size = 256, + .open = f81232_open, + .close = f81232_close, + .dtr_rts = f81232_dtr_rts, + .carrier_raised = f81232_carrier_raised, + .get_serial = f81232_get_serial, + .break_ctl = f81232_break_ctl, + .set_termios = f81232_set_termios, + .tiocmget = f81232_tiocmget, + .tiocmset = f81232_tiocmset, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .tx_empty = f81232_tx_empty, + .process_read_urb = f81232_process_read_urb, + .read_int_callback = f81232_read_int_callback, + .port_probe = f81232_port_probe, + .suspend = f81232_suspend, + .resume = f81232_resume, +}; + +static struct usb_serial_driver f81534a_device = { + .driver = { + .owner = THIS_MODULE, + .name = "f81534a", + }, + .id_table = f81534a_id_table, + .num_ports = 1, + .open = f81534a_open, + .close = f81232_close, + .dtr_rts = f81232_dtr_rts, + .carrier_raised = f81232_carrier_raised, + .get_serial = f81232_get_serial, + .break_ctl = f81232_break_ctl, + .set_termios = f81232_set_termios, + .tiocmget = f81232_tiocmget, + .tiocmset = f81232_tiocmset, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .tx_empty = f81232_tx_empty, + .process_read_urb = f81534a_process_read_urb, + .read_int_callback = f81232_read_int_callback, + .port_probe = f81534a_port_probe, + .suspend = f81232_suspend, + .resume = f81232_resume, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &f81232_device, + &f81534a_device, + NULL, +}; + +static struct usb_driver f81534a_ctrl_driver = { + .name = "f81534a_ctrl", + .id_table = f81534a_ctrl_id_table, + .probe = f81534a_ctrl_probe, + .disconnect = f81534a_ctrl_disconnect, + .resume = f81534a_ctrl_resume, +}; + +static int __init f81232_init(void) +{ + int status; + + status = usb_register_driver(&f81534a_ctrl_driver, THIS_MODULE, + KBUILD_MODNAME); + if (status) + return status; + + status = usb_serial_register_drivers(serial_drivers, KBUILD_MODNAME, + combined_id_table); + if (status) { + usb_deregister(&f81534a_ctrl_driver); + return status; + } + + return 0; +} + +static void __exit f81232_exit(void) +{ + usb_serial_deregister_drivers(serial_drivers); + usb_deregister(&f81534a_ctrl_driver); +} + +module_init(f81232_init); +module_exit(f81232_exit); + +MODULE_DESCRIPTION("Fintek F81232/532A/534A/535/536 USB to serial driver"); +MODULE_AUTHOR("Greg Kroah-Hartman <gregkh@linuxfoundation.org>"); +MODULE_AUTHOR("Peter Hong <peter_hong@fintek.com.tw>"); +MODULE_LICENSE("GPL v2"); |