diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/usb/serial/whiteheat.c | 808 |
1 files changed, 808 insertions, 0 deletions
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c new file mode 100644 index 000000000..7f82d4075 --- /dev/null +++ b/drivers/usb/serial/whiteheat.c @@ -0,0 +1,808 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * USB ConnectTech WhiteHEAT driver + * + * Copyright (C) 2002 + * Connect Tech Inc. + * + * Copyright (C) 1999 - 2001 + * Greg Kroah-Hartman (greg@kroah.com) + * + * See Documentation/usb/usb-serial.rst for more information on using this + * driver + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/mutex.h> +#include <linux/uaccess.h> +#include <asm/termbits.h> +#include <linux/usb.h> +#include <linux/serial_reg.h> +#include <linux/serial.h> +#include <linux/usb/serial.h> +#include <linux/usb/ezusb.h> +#include "whiteheat.h" /* WhiteHEAT specific commands */ + +/* + * Version Information + */ +#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Stuart MacDonald <stuartm@connecttech.com>" +#define DRIVER_DESC "USB ConnectTech WhiteHEAT driver" + +#define CONNECT_TECH_VENDOR_ID 0x0710 +#define CONNECT_TECH_FAKE_WHITE_HEAT_ID 0x0001 +#define CONNECT_TECH_WHITE_HEAT_ID 0x8001 + +/* + ID tables for whiteheat are unusual, because we want to different + things for different versions of the device. Eventually, this + will be doable from a single table. But, for now, we define two + separate ID tables, and then a third table that combines them + just for the purpose of exporting the autoloading information. +*/ +static const struct usb_device_id id_table_std[] = { + { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_WHITE_HEAT_ID) }, + { } /* Terminating entry */ +}; + +static const struct usb_device_id id_table_prerenumeration[] = { + { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_FAKE_WHITE_HEAT_ID) }, + { } /* Terminating entry */ +}; + +static const struct usb_device_id id_table_combined[] = { + { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_WHITE_HEAT_ID) }, + { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_FAKE_WHITE_HEAT_ID) }, + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, id_table_combined); + + +/* function prototypes for the Connect Tech WhiteHEAT prerenumeration device */ +static int whiteheat_firmware_download(struct usb_serial *serial, + const struct usb_device_id *id); +static int whiteheat_firmware_attach(struct usb_serial *serial); + +/* function prototypes for the Connect Tech WhiteHEAT serial converter */ +static int whiteheat_attach(struct usb_serial *serial); +static void whiteheat_release(struct usb_serial *serial); +static int whiteheat_port_probe(struct usb_serial_port *port); +static void whiteheat_port_remove(struct usb_serial_port *port); +static int whiteheat_open(struct tty_struct *tty, + struct usb_serial_port *port); +static void whiteheat_close(struct usb_serial_port *port); +static void whiteheat_get_serial(struct tty_struct *tty, + struct serial_struct *ss); +static void whiteheat_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, + const struct ktermios *old_termios); +static int whiteheat_tiocmget(struct tty_struct *tty); +static int whiteheat_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear); +static void whiteheat_break_ctl(struct tty_struct *tty, int break_state); + +static struct usb_serial_driver whiteheat_fake_device = { + .driver = { + .owner = THIS_MODULE, + .name = "whiteheatnofirm", + }, + .description = "Connect Tech - WhiteHEAT - (prerenumeration)", + .id_table = id_table_prerenumeration, + .num_ports = 1, + .probe = whiteheat_firmware_download, + .attach = whiteheat_firmware_attach, +}; + +static struct usb_serial_driver whiteheat_device = { + .driver = { + .owner = THIS_MODULE, + .name = "whiteheat", + }, + .description = "Connect Tech - WhiteHEAT", + .id_table = id_table_std, + .num_ports = 4, + .num_bulk_in = 5, + .num_bulk_out = 5, + .attach = whiteheat_attach, + .release = whiteheat_release, + .port_probe = whiteheat_port_probe, + .port_remove = whiteheat_port_remove, + .open = whiteheat_open, + .close = whiteheat_close, + .get_serial = whiteheat_get_serial, + .set_termios = whiteheat_set_termios, + .break_ctl = whiteheat_break_ctl, + .tiocmget = whiteheat_tiocmget, + .tiocmset = whiteheat_tiocmset, + .throttle = usb_serial_generic_throttle, + .unthrottle = usb_serial_generic_unthrottle, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &whiteheat_fake_device, &whiteheat_device, NULL +}; + +struct whiteheat_command_private { + struct mutex mutex; + __u8 port_running; + __u8 command_finished; + wait_queue_head_t wait_command; /* for handling sleeping whilst + waiting for a command to + finish */ + __u8 result_buffer[64]; +}; + +struct whiteheat_private { + __u8 mcr; /* FIXME: no locking on mcr */ +}; + + +/* local function prototypes */ +static int start_command_port(struct usb_serial *serial); +static void stop_command_port(struct usb_serial *serial); +static void command_port_write_callback(struct urb *urb); +static void command_port_read_callback(struct urb *urb); + +static int firm_send_command(struct usb_serial_port *port, __u8 command, + __u8 *data, __u8 datasize); +static int firm_open(struct usb_serial_port *port); +static int firm_close(struct usb_serial_port *port); +static void firm_setup_port(struct tty_struct *tty); +static int firm_set_rts(struct usb_serial_port *port, __u8 onoff); +static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff); +static int firm_set_break(struct usb_serial_port *port, __u8 onoff); +static int firm_purge(struct usb_serial_port *port, __u8 rxtx); +static int firm_get_dtr_rts(struct usb_serial_port *port); +static int firm_report_tx_done(struct usb_serial_port *port); + + +#define COMMAND_PORT 4 +#define COMMAND_TIMEOUT (2*HZ) /* 2 second timeout for a command */ +#define COMMAND_TIMEOUT_MS 2000 + + +/***************************************************************************** + * Connect Tech's White Heat prerenumeration driver functions + *****************************************************************************/ + +/* steps to download the firmware to the WhiteHEAT device: + - hold the reset (by writing to the reset bit of the CPUCS register) + - download the VEND_AX.HEX file to the chip using VENDOR_REQUEST-ANCHOR_LOAD + - release the reset (by writing to the CPUCS register) + - download the WH.HEX file for all addresses greater than 0x1b3f using + VENDOR_REQUEST-ANCHOR_EXTERNAL_RAM_LOAD + - hold the reset + - download the WH.HEX file for all addresses less than 0x1b40 using + VENDOR_REQUEST_ANCHOR_LOAD + - release the reset + - device renumerated itself and comes up as new device id with all + firmware download completed. +*/ +static int whiteheat_firmware_download(struct usb_serial *serial, + const struct usb_device_id *id) +{ + int response; + + response = ezusb_fx1_ihex_firmware_download(serial->dev, "whiteheat_loader.fw"); + if (response >= 0) { + response = ezusb_fx1_ihex_firmware_download(serial->dev, "whiteheat.fw"); + if (response >= 0) + return 0; + } + return -ENOENT; +} + + +static int whiteheat_firmware_attach(struct usb_serial *serial) +{ + /* We want this device to fail to have a driver assigned to it */ + return 1; +} + + +/***************************************************************************** + * Connect Tech's White Heat serial driver functions + *****************************************************************************/ + +static int whiteheat_attach(struct usb_serial *serial) +{ + struct usb_serial_port *command_port; + struct whiteheat_command_private *command_info; + struct whiteheat_hw_info *hw_info; + int pipe; + int ret; + int alen; + __u8 *command; + __u8 *result; + + command_port = serial->port[COMMAND_PORT]; + + pipe = usb_sndbulkpipe(serial->dev, + command_port->bulk_out_endpointAddress); + command = kmalloc(2, GFP_KERNEL); + if (!command) + goto no_command_buffer; + command[0] = WHITEHEAT_GET_HW_INFO; + command[1] = 0; + + result = kmalloc(sizeof(*hw_info) + 1, GFP_KERNEL); + if (!result) + goto no_result_buffer; + /* + * When the module is reloaded the firmware is still there and + * the endpoints are still in the usb core unchanged. This is the + * unlinking bug in disguise. Same for the call below. + */ + usb_clear_halt(serial->dev, pipe); + ret = usb_bulk_msg(serial->dev, pipe, command, 2, + &alen, COMMAND_TIMEOUT_MS); + if (ret) { + dev_err(&serial->dev->dev, "%s: Couldn't send command [%d]\n", + serial->type->description, ret); + goto no_firmware; + } else if (alen != 2) { + dev_err(&serial->dev->dev, "%s: Send command incomplete [%d]\n", + serial->type->description, alen); + goto no_firmware; + } + + pipe = usb_rcvbulkpipe(serial->dev, + command_port->bulk_in_endpointAddress); + /* See the comment on the usb_clear_halt() above */ + usb_clear_halt(serial->dev, pipe); + ret = usb_bulk_msg(serial->dev, pipe, result, + sizeof(*hw_info) + 1, &alen, COMMAND_TIMEOUT_MS); + if (ret) { + dev_err(&serial->dev->dev, "%s: Couldn't get results [%d]\n", + serial->type->description, ret); + goto no_firmware; + } else if (alen != sizeof(*hw_info) + 1) { + dev_err(&serial->dev->dev, "%s: Get results incomplete [%d]\n", + serial->type->description, alen); + goto no_firmware; + } else if (result[0] != command[0]) { + dev_err(&serial->dev->dev, "%s: Command failed [%d]\n", + serial->type->description, result[0]); + goto no_firmware; + } + + hw_info = (struct whiteheat_hw_info *)&result[1]; + + dev_info(&serial->dev->dev, "%s: Firmware v%d.%02d\n", + serial->type->description, + hw_info->sw_major_rev, hw_info->sw_minor_rev); + + command_info = kmalloc(sizeof(struct whiteheat_command_private), + GFP_KERNEL); + if (!command_info) + goto no_command_private; + + mutex_init(&command_info->mutex); + command_info->port_running = 0; + init_waitqueue_head(&command_info->wait_command); + usb_set_serial_port_data(command_port, command_info); + command_port->write_urb->complete = command_port_write_callback; + command_port->read_urb->complete = command_port_read_callback; + kfree(result); + kfree(command); + + return 0; + +no_firmware: + /* Firmware likely not running */ + dev_err(&serial->dev->dev, + "%s: Unable to retrieve firmware version, try replugging\n", + serial->type->description); + dev_err(&serial->dev->dev, + "%s: If the firmware is not running (status led not blinking)\n", + serial->type->description); + dev_err(&serial->dev->dev, + "%s: please contact support@connecttech.com\n", + serial->type->description); + kfree(result); + kfree(command); + return -ENODEV; + +no_command_private: + kfree(result); +no_result_buffer: + kfree(command); +no_command_buffer: + return -ENOMEM; +} + +static void whiteheat_release(struct usb_serial *serial) +{ + struct usb_serial_port *command_port; + + /* free up our private data for our command port */ + command_port = serial->port[COMMAND_PORT]; + kfree(usb_get_serial_port_data(command_port)); +} + +static int whiteheat_port_probe(struct usb_serial_port *port) +{ + struct whiteheat_private *info; + + info = kzalloc(sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + usb_set_serial_port_data(port, info); + + return 0; +} + +static void whiteheat_port_remove(struct usb_serial_port *port) +{ + struct whiteheat_private *info; + + info = usb_get_serial_port_data(port); + kfree(info); +} + +static int whiteheat_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + int retval; + + retval = start_command_port(port->serial); + if (retval) + goto exit; + + /* send an open port command */ + retval = firm_open(port); + if (retval) { + stop_command_port(port->serial); + goto exit; + } + + retval = firm_purge(port, WHITEHEAT_PURGE_RX | WHITEHEAT_PURGE_TX); + if (retval) { + firm_close(port); + stop_command_port(port->serial); + goto exit; + } + + if (tty) + firm_setup_port(tty); + + /* Work around HCD bugs */ + usb_clear_halt(port->serial->dev, port->read_urb->pipe); + usb_clear_halt(port->serial->dev, port->write_urb->pipe); + + retval = usb_serial_generic_open(tty, port); + if (retval) { + firm_close(port); + stop_command_port(port->serial); + goto exit; + } +exit: + return retval; +} + + +static void whiteheat_close(struct usb_serial_port *port) +{ + firm_report_tx_done(port); + firm_close(port); + + usb_serial_generic_close(port); + + stop_command_port(port->serial); +} + +static int whiteheat_tiocmget(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct whiteheat_private *info = usb_get_serial_port_data(port); + unsigned int modem_signals = 0; + + firm_get_dtr_rts(port); + if (info->mcr & UART_MCR_DTR) + modem_signals |= TIOCM_DTR; + if (info->mcr & UART_MCR_RTS) + modem_signals |= TIOCM_RTS; + + return modem_signals; +} + +static int whiteheat_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct usb_serial_port *port = tty->driver_data; + struct whiteheat_private *info = usb_get_serial_port_data(port); + + if (set & TIOCM_RTS) + info->mcr |= UART_MCR_RTS; + if (set & TIOCM_DTR) + info->mcr |= UART_MCR_DTR; + + if (clear & TIOCM_RTS) + info->mcr &= ~UART_MCR_RTS; + if (clear & TIOCM_DTR) + info->mcr &= ~UART_MCR_DTR; + + firm_set_dtr(port, info->mcr & UART_MCR_DTR); + firm_set_rts(port, info->mcr & UART_MCR_RTS); + return 0; +} + + +static void whiteheat_get_serial(struct tty_struct *tty, struct serial_struct *ss) +{ + ss->baud_base = 460800; +} + + +static void whiteheat_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, + const struct ktermios *old_termios) +{ + firm_setup_port(tty); +} + +static void whiteheat_break_ctl(struct tty_struct *tty, int break_state) +{ + struct usb_serial_port *port = tty->driver_data; + firm_set_break(port, break_state); +} + + +/***************************************************************************** + * Connect Tech's White Heat callback routines + *****************************************************************************/ +static void command_port_write_callback(struct urb *urb) +{ + int status = urb->status; + + if (status) { + dev_dbg(&urb->dev->dev, "nonzero urb status: %d\n", status); + return; + } +} + + +static void command_port_read_callback(struct urb *urb) +{ + struct usb_serial_port *command_port = urb->context; + struct whiteheat_command_private *command_info; + int status = urb->status; + unsigned char *data = urb->transfer_buffer; + int result; + + command_info = usb_get_serial_port_data(command_port); + if (!command_info) { + dev_dbg(&urb->dev->dev, "%s - command_info is NULL, exiting.\n", __func__); + return; + } + if (!urb->actual_length) { + dev_dbg(&urb->dev->dev, "%s - empty response, exiting.\n", __func__); + return; + } + if (status) { + dev_dbg(&urb->dev->dev, "%s - nonzero urb status: %d\n", __func__, status); + if (status != -ENOENT) + command_info->command_finished = WHITEHEAT_CMD_FAILURE; + wake_up(&command_info->wait_command); + return; + } + + usb_serial_debug_data(&command_port->dev, __func__, urb->actual_length, data); + + if (data[0] == WHITEHEAT_CMD_COMPLETE) { + command_info->command_finished = WHITEHEAT_CMD_COMPLETE; + wake_up(&command_info->wait_command); + } else if (data[0] == WHITEHEAT_CMD_FAILURE) { + command_info->command_finished = WHITEHEAT_CMD_FAILURE; + wake_up(&command_info->wait_command); + } else if (data[0] == WHITEHEAT_EVENT) { + /* These are unsolicited reports from the firmware, hence no + waiting command to wakeup */ + dev_dbg(&urb->dev->dev, "%s - event received\n", __func__); + } else if ((data[0] == WHITEHEAT_GET_DTR_RTS) && + (urb->actual_length - 1 <= sizeof(command_info->result_buffer))) { + memcpy(command_info->result_buffer, &data[1], + urb->actual_length - 1); + command_info->command_finished = WHITEHEAT_CMD_COMPLETE; + wake_up(&command_info->wait_command); + } else + dev_dbg(&urb->dev->dev, "%s - bad reply from firmware\n", __func__); + + /* Continue trying to always read */ + result = usb_submit_urb(command_port->read_urb, GFP_ATOMIC); + if (result) + dev_dbg(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n", + __func__, result); +} + + +/***************************************************************************** + * Connect Tech's White Heat firmware interface + *****************************************************************************/ +static int firm_send_command(struct usb_serial_port *port, __u8 command, + __u8 *data, __u8 datasize) +{ + struct usb_serial_port *command_port; + struct whiteheat_command_private *command_info; + struct whiteheat_private *info; + struct device *dev = &port->dev; + __u8 *transfer_buffer; + int retval = 0; + int t; + + dev_dbg(dev, "%s - command %d\n", __func__, command); + + command_port = port->serial->port[COMMAND_PORT]; + command_info = usb_get_serial_port_data(command_port); + + if (command_port->bulk_out_size < datasize + 1) + return -EIO; + + mutex_lock(&command_info->mutex); + command_info->command_finished = false; + + transfer_buffer = (__u8 *)command_port->write_urb->transfer_buffer; + transfer_buffer[0] = command; + memcpy(&transfer_buffer[1], data, datasize); + command_port->write_urb->transfer_buffer_length = datasize + 1; + retval = usb_submit_urb(command_port->write_urb, GFP_NOIO); + if (retval) { + dev_dbg(dev, "%s - submit urb failed\n", __func__); + goto exit; + } + + /* wait for the command to complete */ + t = wait_event_timeout(command_info->wait_command, + (bool)command_info->command_finished, COMMAND_TIMEOUT); + if (!t) + usb_kill_urb(command_port->write_urb); + + if (command_info->command_finished == false) { + dev_dbg(dev, "%s - command timed out.\n", __func__); + retval = -ETIMEDOUT; + goto exit; + } + + if (command_info->command_finished == WHITEHEAT_CMD_FAILURE) { + dev_dbg(dev, "%s - command failed.\n", __func__); + retval = -EIO; + goto exit; + } + + if (command_info->command_finished == WHITEHEAT_CMD_COMPLETE) { + dev_dbg(dev, "%s - command completed.\n", __func__); + switch (command) { + case WHITEHEAT_GET_DTR_RTS: + info = usb_get_serial_port_data(port); + info->mcr = command_info->result_buffer[0]; + break; + } + } +exit: + mutex_unlock(&command_info->mutex); + return retval; +} + + +static int firm_open(struct usb_serial_port *port) +{ + struct whiteheat_simple open_command; + + open_command.port = port->port_number + 1; + return firm_send_command(port, WHITEHEAT_OPEN, + (__u8 *)&open_command, sizeof(open_command)); +} + + +static int firm_close(struct usb_serial_port *port) +{ + struct whiteheat_simple close_command; + + close_command.port = port->port_number + 1; + return firm_send_command(port, WHITEHEAT_CLOSE, + (__u8 *)&close_command, sizeof(close_command)); +} + + +static void firm_setup_port(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct device *dev = &port->dev; + struct whiteheat_port_settings port_settings; + unsigned int cflag = tty->termios.c_cflag; + speed_t baud; + + port_settings.port = port->port_number + 1; + + port_settings.bits = tty_get_char_size(cflag); + dev_dbg(dev, "%s - data bits = %d\n", __func__, port_settings.bits); + + /* determine the parity */ + if (cflag & PARENB) + if (cflag & CMSPAR) + if (cflag & PARODD) + port_settings.parity = WHITEHEAT_PAR_MARK; + else + port_settings.parity = WHITEHEAT_PAR_SPACE; + else + if (cflag & PARODD) + port_settings.parity = WHITEHEAT_PAR_ODD; + else + port_settings.parity = WHITEHEAT_PAR_EVEN; + else + port_settings.parity = WHITEHEAT_PAR_NONE; + dev_dbg(dev, "%s - parity = %c\n", __func__, port_settings.parity); + + /* figure out the stop bits requested */ + if (cflag & CSTOPB) + port_settings.stop = 2; + else + port_settings.stop = 1; + dev_dbg(dev, "%s - stop bits = %d\n", __func__, port_settings.stop); + + /* figure out the flow control settings */ + if (cflag & CRTSCTS) + port_settings.hflow = (WHITEHEAT_HFLOW_CTS | + WHITEHEAT_HFLOW_RTS); + else + port_settings.hflow = WHITEHEAT_HFLOW_NONE; + dev_dbg(dev, "%s - hardware flow control = %s %s %s %s\n", __func__, + (port_settings.hflow & WHITEHEAT_HFLOW_CTS) ? "CTS" : "", + (port_settings.hflow & WHITEHEAT_HFLOW_RTS) ? "RTS" : "", + (port_settings.hflow & WHITEHEAT_HFLOW_DSR) ? "DSR" : "", + (port_settings.hflow & WHITEHEAT_HFLOW_DTR) ? "DTR" : ""); + + /* determine software flow control */ + if (I_IXOFF(tty)) + port_settings.sflow = WHITEHEAT_SFLOW_RXTX; + else + port_settings.sflow = WHITEHEAT_SFLOW_NONE; + dev_dbg(dev, "%s - software flow control = %c\n", __func__, port_settings.sflow); + + port_settings.xon = START_CHAR(tty); + port_settings.xoff = STOP_CHAR(tty); + dev_dbg(dev, "%s - XON = %2x, XOFF = %2x\n", __func__, port_settings.xon, port_settings.xoff); + + /* get the baud rate wanted */ + baud = tty_get_baud_rate(tty); + port_settings.baud = cpu_to_le32(baud); + dev_dbg(dev, "%s - baud rate = %u\n", __func__, baud); + + /* fixme: should set validated settings */ + tty_encode_baud_rate(tty, baud, baud); + + /* handle any settings that aren't specified in the tty structure */ + port_settings.lloop = 0; + + /* now send the message to the device */ + firm_send_command(port, WHITEHEAT_SETUP_PORT, + (__u8 *)&port_settings, sizeof(port_settings)); +} + + +static int firm_set_rts(struct usb_serial_port *port, __u8 onoff) +{ + struct whiteheat_set_rdb rts_command; + + rts_command.port = port->port_number + 1; + rts_command.state = onoff; + return firm_send_command(port, WHITEHEAT_SET_RTS, + (__u8 *)&rts_command, sizeof(rts_command)); +} + + +static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff) +{ + struct whiteheat_set_rdb dtr_command; + + dtr_command.port = port->port_number + 1; + dtr_command.state = onoff; + return firm_send_command(port, WHITEHEAT_SET_DTR, + (__u8 *)&dtr_command, sizeof(dtr_command)); +} + + +static int firm_set_break(struct usb_serial_port *port, __u8 onoff) +{ + struct whiteheat_set_rdb break_command; + + break_command.port = port->port_number + 1; + break_command.state = onoff; + return firm_send_command(port, WHITEHEAT_SET_BREAK, + (__u8 *)&break_command, sizeof(break_command)); +} + + +static int firm_purge(struct usb_serial_port *port, __u8 rxtx) +{ + struct whiteheat_purge purge_command; + + purge_command.port = port->port_number + 1; + purge_command.what = rxtx; + return firm_send_command(port, WHITEHEAT_PURGE, + (__u8 *)&purge_command, sizeof(purge_command)); +} + + +static int firm_get_dtr_rts(struct usb_serial_port *port) +{ + struct whiteheat_simple get_dr_command; + + get_dr_command.port = port->port_number + 1; + return firm_send_command(port, WHITEHEAT_GET_DTR_RTS, + (__u8 *)&get_dr_command, sizeof(get_dr_command)); +} + + +static int firm_report_tx_done(struct usb_serial_port *port) +{ + struct whiteheat_simple close_command; + + close_command.port = port->port_number + 1; + return firm_send_command(port, WHITEHEAT_REPORT_TX_DONE, + (__u8 *)&close_command, sizeof(close_command)); +} + + +/***************************************************************************** + * Connect Tech's White Heat utility functions + *****************************************************************************/ +static int start_command_port(struct usb_serial *serial) +{ + struct usb_serial_port *command_port; + struct whiteheat_command_private *command_info; + int retval = 0; + + command_port = serial->port[COMMAND_PORT]; + command_info = usb_get_serial_port_data(command_port); + mutex_lock(&command_info->mutex); + if (!command_info->port_running) { + /* Work around HCD bugs */ + usb_clear_halt(serial->dev, command_port->read_urb->pipe); + + retval = usb_submit_urb(command_port->read_urb, GFP_KERNEL); + if (retval) { + dev_err(&serial->dev->dev, + "%s - failed submitting read urb, error %d\n", + __func__, retval); + goto exit; + } + } + command_info->port_running++; + +exit: + mutex_unlock(&command_info->mutex); + return retval; +} + + +static void stop_command_port(struct usb_serial *serial) +{ + struct usb_serial_port *command_port; + struct whiteheat_command_private *command_info; + + command_port = serial->port[COMMAND_PORT]; + command_info = usb_get_serial_port_data(command_port); + mutex_lock(&command_info->mutex); + command_info->port_running--; + if (!command_info->port_running) + usb_kill_urb(command_port->read_urb); + mutex_unlock(&command_info->mutex); +} + +module_usb_serial_driver(serial_drivers, id_table_combined); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +MODULE_FIRMWARE("whiteheat.fw"); +MODULE_FIRMWARE("whiteheat_loader.fw"); |