diff options
Diffstat (limited to 'drivers/usb/storage/cypress_atacb.c')
| -rw-r--r-- | drivers/usb/storage/cypress_atacb.c | 286 |
1 files changed, 286 insertions, 0 deletions
diff --git a/drivers/usb/storage/cypress_atacb.c b/drivers/usb/storage/cypress_atacb.c new file mode 100644 index 000000000..98b3ec352 --- /dev/null +++ b/drivers/usb/storage/cypress_atacb.c @@ -0,0 +1,286 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Support for emulating SAT (ata pass through) on devices based + * on the Cypress USB/ATA bridge supporting ATACB. + * + * Copyright (c) 2008 Matthieu Castet (castet.matthieu@free.fr) + */ + +#include <linux/module.h> +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_eh.h> +#include <linux/ata.h> + +#include "usb.h" +#include "protocol.h" +#include "scsiglue.h" +#include "debug.h" + +#define DRV_NAME "ums-cypress" + +MODULE_DESCRIPTION("SAT support for Cypress USB/ATA bridges with ATACB"); +MODULE_AUTHOR("Matthieu Castet <castet.matthieu@free.fr>"); +MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(USB_STORAGE); + +/* + * The table of devices + */ +#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ + vendorName, productName, useProtocol, useTransport, \ + initFunction, flags) \ +{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ + .driver_info = (flags) } + +static struct usb_device_id cypress_usb_ids[] = { +# include "unusual_cypress.h" + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, cypress_usb_ids); + +#undef UNUSUAL_DEV + +/* + * The flags table + */ +#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ + vendor_name, product_name, use_protocol, use_transport, \ + init_function, Flags) \ +{ \ + .vendorName = vendor_name, \ + .productName = product_name, \ + .useProtocol = use_protocol, \ + .useTransport = use_transport, \ + .initFunction = init_function, \ +} + +static struct us_unusual_dev cypress_unusual_dev_list[] = { +# include "unusual_cypress.h" + { } /* Terminating entry */ +}; + +#undef UNUSUAL_DEV + + +/* + * ATACB is a protocol used on cypress usb<->ata bridge to + * send raw ATA command over mass storage + * There is a ATACB2 protocol that support LBA48 on newer chip. + * More info that be found on cy7c68310_8.pdf and cy7c68300c_8.pdf + * datasheet from cypress.com. + */ +static void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us) +{ + unsigned char save_cmnd[MAX_COMMAND_SIZE]; + + if (likely(srb->cmnd[0] != ATA_16 && srb->cmnd[0] != ATA_12)) { + usb_stor_transparent_scsi_command(srb, us); + return; + } + + memcpy(save_cmnd, srb->cmnd, sizeof(save_cmnd)); + memset(srb->cmnd, 0, MAX_COMMAND_SIZE); + + /* check if we support the command */ + if (save_cmnd[1] >> 5) /* MULTIPLE_COUNT */ + goto invalid_fld; + /* check protocol */ + switch ((save_cmnd[1] >> 1) & 0xf) { + case 3: /*no DATA */ + case 4: /* PIO in */ + case 5: /* PIO out */ + break; + default: + goto invalid_fld; + } + + /* first build the ATACB command */ + srb->cmd_len = 16; + + srb->cmnd[0] = 0x24; /* + * bVSCBSignature : vendor-specific command + * this value can change, but most(all ?) manufacturers + * keep the cypress default : 0x24 + */ + srb->cmnd[1] = 0x24; /* bVSCBSubCommand : 0x24 for ATACB */ + + srb->cmnd[3] = 0xff - 1; /* + * features, sector count, lba low, lba med + * lba high, device, command are valid + */ + srb->cmnd[4] = 1; /* TransferBlockCount : 512 */ + + if (save_cmnd[0] == ATA_16) { + srb->cmnd[ 6] = save_cmnd[ 4]; /* features */ + srb->cmnd[ 7] = save_cmnd[ 6]; /* sector count */ + srb->cmnd[ 8] = save_cmnd[ 8]; /* lba low */ + srb->cmnd[ 9] = save_cmnd[10]; /* lba med */ + srb->cmnd[10] = save_cmnd[12]; /* lba high */ + srb->cmnd[11] = save_cmnd[13]; /* device */ + srb->cmnd[12] = save_cmnd[14]; /* command */ + + if (save_cmnd[1] & 0x01) {/* extended bit set for LBA48 */ + /* this could be supported by atacb2 */ + if (save_cmnd[3] || save_cmnd[5] || save_cmnd[7] || save_cmnd[9] + || save_cmnd[11]) + goto invalid_fld; + } + } else { /* ATA12 */ + srb->cmnd[ 6] = save_cmnd[3]; /* features */ + srb->cmnd[ 7] = save_cmnd[4]; /* sector count */ + srb->cmnd[ 8] = save_cmnd[5]; /* lba low */ + srb->cmnd[ 9] = save_cmnd[6]; /* lba med */ + srb->cmnd[10] = save_cmnd[7]; /* lba high */ + srb->cmnd[11] = save_cmnd[8]; /* device */ + srb->cmnd[12] = save_cmnd[9]; /* command */ + + } + /* Filter SET_FEATURES - XFER MODE command */ + if ((srb->cmnd[12] == ATA_CMD_SET_FEATURES) + && (srb->cmnd[6] == SETFEATURES_XFER)) + goto invalid_fld; + + if (srb->cmnd[12] == ATA_CMD_ID_ATA || srb->cmnd[12] == ATA_CMD_ID_ATAPI) + srb->cmnd[2] |= (1<<7); /* set IdentifyPacketDevice for these cmds */ + + + usb_stor_transparent_scsi_command(srb, us); + + /* if the device doesn't support ATACB */ + if (srb->result == SAM_STAT_CHECK_CONDITION && + memcmp(srb->sense_buffer, usb_stor_sense_invalidCDB, + sizeof(usb_stor_sense_invalidCDB)) == 0) { + usb_stor_dbg(us, "cypress atacb not supported ???\n"); + goto end; + } + + /* + * if ck_cond flags is set, and there wasn't critical error, + * build the special sense + */ + if ((srb->result != (DID_ERROR << 16) && + srb->result != (DID_ABORT << 16)) && + save_cmnd[2] & 0x20) { + struct scsi_eh_save ses; + unsigned char regs[8]; + unsigned char *sb = srb->sense_buffer; + unsigned char *desc = sb + 8; + int tmp_result; + + /* build the command for reading the ATA registers */ + scsi_eh_prep_cmnd(srb, &ses, NULL, 0, sizeof(regs)); + + /* + * we use the same command as before, but we set + * the read taskfile bit, for not executing atacb command, + * but reading register selected in srb->cmnd[4] + */ + srb->cmd_len = 16; + srb->cmnd[2] = 1; + + usb_stor_transparent_scsi_command(srb, us); + memcpy(regs, srb->sense_buffer, sizeof(regs)); + tmp_result = srb->result; + scsi_eh_restore_cmnd(srb, &ses); + /* we fail to get registers, report invalid command */ + if (tmp_result != SAM_STAT_GOOD) + goto invalid_fld; + + /* build the sense */ + memset(sb, 0, SCSI_SENSE_BUFFERSIZE); + + /* set sk, asc for a good command */ + sb[1] = RECOVERED_ERROR; + sb[2] = 0; /* ATA PASS THROUGH INFORMATION AVAILABLE */ + sb[3] = 0x1D; + + /* + * XXX we should generate sk, asc, ascq from status and error + * regs + * (see 11.1 Error translation ATA device error to SCSI error + * map, and ata_to_sense_error from libata.) + */ + + /* Sense data is current and format is descriptor. */ + sb[0] = 0x72; + desc[0] = 0x09; /* ATA_RETURN_DESCRIPTOR */ + + /* set length of additional sense data */ + sb[7] = 14; + desc[1] = 12; + + /* Copy registers into sense buffer. */ + desc[ 2] = 0x00; + desc[ 3] = regs[1]; /* features */ + desc[ 5] = regs[2]; /* sector count */ + desc[ 7] = regs[3]; /* lba low */ + desc[ 9] = regs[4]; /* lba med */ + desc[11] = regs[5]; /* lba high */ + desc[12] = regs[6]; /* device */ + desc[13] = regs[7]; /* command */ + + srb->result = SAM_STAT_CHECK_CONDITION; + } + goto end; +invalid_fld: + srb->result = SAM_STAT_CHECK_CONDITION; + + memcpy(srb->sense_buffer, + usb_stor_sense_invalidCDB, + sizeof(usb_stor_sense_invalidCDB)); +end: + memcpy(srb->cmnd, save_cmnd, sizeof(save_cmnd)); + if (srb->cmnd[0] == ATA_12) + srb->cmd_len = 12; +} + +static struct scsi_host_template cypress_host_template; + +static int cypress_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct us_data *us; + int result; + struct usb_device *device; + + result = usb_stor_probe1(&us, intf, id, + (id - cypress_usb_ids) + cypress_unusual_dev_list, + &cypress_host_template); + if (result) + return result; + + /* + * Among CY7C68300 chips, the A revision does not support Cypress ATACB + * Filter out this revision from EEPROM default descriptor values + */ + device = interface_to_usbdev(intf); + if (device->descriptor.iManufacturer != 0x38 || + device->descriptor.iProduct != 0x4e || + device->descriptor.iSerialNumber != 0x64) { + us->protocol_name = "Transparent SCSI with Cypress ATACB"; + us->proto_handler = cypress_atacb_passthrough; + } else { + us->protocol_name = "Transparent SCSI"; + us->proto_handler = usb_stor_transparent_scsi_command; + } + + result = usb_stor_probe2(us); + return result; +} + +static struct usb_driver cypress_driver = { + .name = DRV_NAME, + .probe = cypress_probe, + .disconnect = usb_stor_disconnect, + .suspend = usb_stor_suspend, + .resume = usb_stor_resume, + .reset_resume = usb_stor_reset_resume, + .pre_reset = usb_stor_pre_reset, + .post_reset = usb_stor_post_reset, + .id_table = cypress_usb_ids, + .soft_unbind = 1, + .no_dynamic_id = 1, +}; + +module_usb_stor_driver(cypress_driver, cypress_host_template, DRV_NAME); |