diff options
Diffstat (limited to 'net/Kconfig')
| -rw-r--r-- | net/Kconfig | 474 |
1 files changed, 474 insertions, 0 deletions
diff --git a/net/Kconfig b/net/Kconfig new file mode 100644 index 000000000..48c33c222 --- /dev/null +++ b/net/Kconfig @@ -0,0 +1,474 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Network configuration +# + +menuconfig NET + bool "Networking support" + select NLATTR + select GENERIC_NET_UTILS + select BPF + help + Unless you really know what you are doing, you should say Y here. + The reason is that some programs need kernel networking support even + when running on a stand-alone machine that isn't connected to any + other computer. + + If you are upgrading from an older kernel, you + should consider updating your networking tools too because changes + in the kernel and the tools often go hand in hand. The tools are + contained in the package net-tools, the location and version number + of which are given in <file:Documentation/Changes>. + + For a general introduction to Linux networking, it is highly + recommended to read the NET-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + +if NET + +config WANT_COMPAT_NETLINK_MESSAGES + bool + help + This option can be selected by other options that need compat + netlink messages. + +config COMPAT_NETLINK_MESSAGES + def_bool y + depends on COMPAT + depends on WEXT_CORE || WANT_COMPAT_NETLINK_MESSAGES + help + This option makes it possible to send different netlink messages + to tasks depending on whether the task is a compat task or not. To + achieve this, you need to set skb_shinfo(skb)->frag_list to the + compat skb before sending the skb, the netlink code will sort out + which message to actually pass to the task. + + Newly written code should NEVER need this option but do + compat-independent messages instead! + +config NET_INGRESS + bool + +config NET_EGRESS + bool + +config NET_REDIRECT + bool + +config SKB_EXTENSIONS + bool + +menu "Networking options" + +source "net/packet/Kconfig" +source "net/unix/Kconfig" +source "net/tls/Kconfig" +source "net/xfrm/Kconfig" +source "net/iucv/Kconfig" +source "net/smc/Kconfig" +source "net/xdp/Kconfig" + +config INET + bool "TCP/IP networking" + help + These are the protocols used on the Internet and on most local + Ethernets. It is highly recommended to say Y here (this will enlarge + your kernel by about 400 KB), since some programs (e.g. the X window + system) use TCP/IP even if your machine is not connected to any + other computer. You will get the so-called loopback device which + allows you to ping yourself (great fun, that!). + + For an excellent introduction to Linux networking, please read the + Linux Networking HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + If you say Y here and also to "/proc file system support" and + "Sysctl support" below, you can change various aspects of the + behavior of the TCP/IP code by writing to the (virtual) files in + /proc/sys/net/ipv4/*; the options are explained in the file + <file:Documentation/networking/ip-sysctl.rst>. + + Short answer: say Y. + +if INET +source "net/ipv4/Kconfig" +source "net/ipv6/Kconfig" +source "net/netlabel/Kconfig" +source "net/mptcp/Kconfig" + +endif # if INET + +config NETWORK_SECMARK + bool "Security Marking" + help + This enables security marking of network packets, similar + to nfmark, but designated for security purposes. + If you are unsure how to answer this question, answer N. + +config NET_PTP_CLASSIFY + def_bool n + +config NETWORK_PHY_TIMESTAMPING + bool "Timestamping in PHY devices" + select NET_PTP_CLASSIFY + help + This allows timestamping of network packets by PHYs (or + other MII bus snooping devices) with hardware timestamping + capabilities. This option adds some overhead in the transmit + and receive paths. + + If you are unsure how to answer this question, answer N. + +menuconfig NETFILTER + bool "Network packet filtering framework (Netfilter)" + help + Netfilter is a framework for filtering and mangling network packets + that pass through your Linux box. + + The most common use of packet filtering is to run your Linux box as + a firewall protecting a local network from the Internet. The type of + firewall provided by this kernel support is called a "packet + filter", which means that it can reject individual network packets + based on type, source, destination etc. The other kind of firewall, + a "proxy-based" one, is more secure but more intrusive and more + bothersome to set up; it inspects the network traffic much more + closely, modifies it and has knowledge about the higher level + protocols, which a packet filter lacks. Moreover, proxy-based + firewalls often require changes to the programs running on the local + clients. Proxy-based firewalls don't need support by the kernel, but + they are often combined with a packet filter, which only works if + you say Y here. + + You should also say Y here if you intend to use your Linux box as + the gateway to the Internet for a local network of machines without + globally valid IP addresses. This is called "masquerading": if one + of the computers on your local network wants to send something to + the outside, your box can "masquerade" as that computer, i.e. it + forwards the traffic to the intended outside destination, but + modifies the packets to make it look like they came from the + firewall box itself. It works both ways: if the outside host + replies, the Linux box will silently forward the traffic to the + correct local computer. This way, the computers on your local net + are completely invisible to the outside world, even though they can + reach the outside and can receive replies. It is even possible to + run globally visible servers from within a masqueraded local network + using a mechanism called portforwarding. Masquerading is also often + called NAT (Network Address Translation). + + Another use of Netfilter is in transparent proxying: if a machine on + the local network tries to connect to an outside host, your Linux + box can transparently forward the traffic to a local server, + typically a caching proxy server. + + Yet another use of Netfilter is building a bridging firewall. Using + a bridge with Network packet filtering enabled makes iptables "see" + the bridged traffic. For filtering on the lower network and Ethernet + protocols over the bridge, use ebtables (under bridge netfilter + configuration). + + Various modules exist for netfilter which replace the previous + masquerading (ipmasqadm), packet filtering (ipchains), transparent + proxying, and portforwarding mechanisms. Please see + <file:Documentation/Changes> under "iptables" for the location of + these packages. + +if NETFILTER + +config NETFILTER_ADVANCED + bool "Advanced netfilter configuration" + depends on NETFILTER + default y + help + If you say Y here you can select between all the netfilter modules. + If you say N the more unusual ones will not be shown and the + basic ones needed by most people will default to 'M'. + + If unsure, say Y. + +config BRIDGE_NETFILTER + tristate "Bridged IP/ARP packets filtering" + depends on BRIDGE + depends on NETFILTER && INET + depends on NETFILTER_ADVANCED + select NETFILTER_FAMILY_BRIDGE + select SKB_EXTENSIONS + help + Enabling this option will let arptables resp. iptables see bridged + ARP resp. IP traffic. If you want a bridging firewall, you probably + want this option enabled. + Enabling or disabling this option doesn't enable or disable + ebtables. + + If unsure, say N. + +source "net/netfilter/Kconfig" +source "net/ipv4/netfilter/Kconfig" +source "net/ipv6/netfilter/Kconfig" +source "net/bridge/netfilter/Kconfig" + +endif + +source "net/bpfilter/Kconfig" + +source "net/dccp/Kconfig" +source "net/sctp/Kconfig" +source "net/rds/Kconfig" +source "net/tipc/Kconfig" +source "net/atm/Kconfig" +source "net/l2tp/Kconfig" +source "net/802/Kconfig" +source "net/bridge/Kconfig" +source "net/dsa/Kconfig" +source "net/8021q/Kconfig" +source "net/llc/Kconfig" +source "drivers/net/appletalk/Kconfig" +source "net/x25/Kconfig" +source "net/lapb/Kconfig" +source "net/phonet/Kconfig" +source "net/6lowpan/Kconfig" +source "net/ieee802154/Kconfig" +source "net/mac802154/Kconfig" +source "net/sched/Kconfig" +source "net/dcb/Kconfig" +source "net/dns_resolver/Kconfig" +source "net/batman-adv/Kconfig" +source "net/openvswitch/Kconfig" +source "net/vmw_vsock/Kconfig" +source "net/netlink/Kconfig" +source "net/mpls/Kconfig" +source "net/nsh/Kconfig" +source "net/hsr/Kconfig" +source "net/switchdev/Kconfig" +source "net/l3mdev/Kconfig" +source "net/qrtr/Kconfig" +source "net/ncsi/Kconfig" + +config PCPU_DEV_REFCNT + bool "Use percpu variables to maintain network device refcount" + depends on SMP + default y + help + network device refcount are using per cpu variables if this option is set. + This can be forced to N to detect underflows (with a performance drop). + +config RPS + bool + depends on SMP && SYSFS + default y + +config RFS_ACCEL + bool + depends on RPS + select CPU_RMAP + default y + +config SOCK_RX_QUEUE_MAPPING + bool + +config XPS + bool + depends on SMP + select SOCK_RX_QUEUE_MAPPING + default y + +config HWBM + bool + +config CGROUP_NET_PRIO + bool "Network priority cgroup" + depends on CGROUPS + select SOCK_CGROUP_DATA + help + Cgroup subsystem for use in assigning processes to network priorities on + a per-interface basis. + +config CGROUP_NET_CLASSID + bool "Network classid cgroup" + depends on CGROUPS + select SOCK_CGROUP_DATA + help + Cgroup subsystem for use as general purpose socket classid marker that is + being used in cls_cgroup and for netfilter matching. + +config NET_RX_BUSY_POLL + bool + default y if !PREEMPT_RT + +config BQL + bool + depends on SYSFS + select DQL + default y + +config BPF_STREAM_PARSER + bool "enable BPF STREAM_PARSER" + depends on INET + depends on BPF_SYSCALL + depends on CGROUP_BPF + select STREAM_PARSER + select NET_SOCK_MSG + help + Enabling this allows a TCP stream parser to be used with + BPF_MAP_TYPE_SOCKMAP. + +config NET_FLOW_LIMIT + bool + depends on RPS + default y + help + The network stack has to drop packets when a receive processing CPU's + backlog reaches netdev_max_backlog. If a few out of many active flows + generate the vast majority of load, drop their traffic earlier to + maintain capacity for the other flows. This feature provides servers + with many clients some protection against DoS by a single (spoofed) + flow that greatly exceeds average workload. + +menu "Network testing" + +config NET_PKTGEN + tristate "Packet Generator (USE WITH CAUTION)" + depends on INET && PROC_FS + help + This module will inject preconfigured packets, at a configurable + rate, out of a given interface. It is used for network interface + stress testing and performance analysis. If you don't understand + what was just said, you don't need it: say N. + + Documentation on how to use the packet generator can be found + at <file:Documentation/networking/pktgen.rst>. + + To compile this code as a module, choose M here: the + module will be called pktgen. + +config NET_DROP_MONITOR + tristate "Network packet drop alerting service" + depends on INET && TRACEPOINTS + help + This feature provides an alerting service to userspace in the + event that packets are discarded in the network stack. Alerts + are broadcast via netlink socket to any listening user space + process. If you don't need network drop alerts, or if you are ok + just checking the various proc files and other utilities for + drop statistics, say N here. + +endmenu + +endmenu + +source "net/ax25/Kconfig" +source "net/can/Kconfig" +source "net/bluetooth/Kconfig" +source "net/rxrpc/Kconfig" +source "net/kcm/Kconfig" +source "net/strparser/Kconfig" +source "net/mctp/Kconfig" + +config FIB_RULES + bool + +menuconfig WIRELESS + bool "Wireless" + depends on !S390 + default y + +if WIRELESS + +source "net/wireless/Kconfig" +source "net/mac80211/Kconfig" + +endif # WIRELESS + +source "net/rfkill/Kconfig" +source "net/9p/Kconfig" +source "net/caif/Kconfig" +source "net/ceph/Kconfig" +source "net/nfc/Kconfig" +source "net/psample/Kconfig" +source "net/ife/Kconfig" + +config LWTUNNEL + bool "Network light weight tunnels" + help + This feature provides an infrastructure to support light weight + tunnels like mpls. There is no netdevice associated with a light + weight tunnel endpoint. Tunnel encapsulation parameters are stored + with light weight tunnel state associated with fib routes. + +config LWTUNNEL_BPF + bool "Execute BPF program as route nexthop action" + depends on LWTUNNEL && INET + default y if LWTUNNEL=y + help + Allows to run BPF programs as a nexthop action following a route + lookup for incoming and outgoing packets. + +config DST_CACHE + bool + default n + +config GRO_CELLS + bool + default n + +config SOCK_VALIDATE_XMIT + bool + +config NET_SELFTESTS + def_tristate PHYLIB + depends on PHYLIB && INET + +config NET_SOCK_MSG + bool + default n + help + The NET_SOCK_MSG provides a framework for plain sockets (e.g. TCP) or + ULPs (upper layer modules, e.g. TLS) to process L7 application data + with the help of BPF programs. + +config NET_DEVLINK + bool + default n + +config PAGE_POOL + bool + +config PAGE_POOL_STATS + default n + bool "Page pool stats" + depends on PAGE_POOL + help + Enable page pool statistics to track page allocation and recycling + in page pools. This option incurs additional CPU cost in allocation + and recycle paths and additional memory cost to store the statistics. + These statistics are only available if this option is enabled and if + the driver using the page pool supports exporting this data. + + If unsure, say N. + +config FAILOVER + tristate "Generic failover module" + help + The failover module provides a generic interface for paravirtual + drivers to register a netdev and a set of ops with a failover + instance. The ops are used as event handlers that get called to + handle netdev register/unregister/link change/name change events + on slave pci ethernet devices with the same mac address as the + failover netdev. This enables paravirtual drivers to use a + VF as an accelerated low latency datapath. It also allows live + migration of VMs with direct attached VFs by failing over to the + paravirtual datapath when the VF is unplugged. + +config ETHTOOL_NETLINK + bool "Netlink interface for ethtool" + default y + help + An alternative userspace interface for ethtool based on generic + netlink. It provides better extensibility and some new features, + e.g. notification messages. + +config NETDEV_ADDR_LIST_TEST + tristate "Unit tests for device address list" + default KUNIT_ALL_TESTS + depends on KUNIT + +endif # if NET |