diff options
Diffstat (limited to '')
| -rw-r--r-- | sound/soc/ti/Kconfig | 234 |
1 files changed, 234 insertions, 0 deletions
diff --git a/sound/soc/ti/Kconfig b/sound/soc/ti/Kconfig new file mode 100644 index 000000000..40110e9a9 --- /dev/null +++ b/sound/soc/ti/Kconfig @@ -0,0 +1,234 @@ +# SPDX-License-Identifier: GPL-2.0-only +menu "Audio support for Texas Instruments SoCs" +depends on DMA_OMAP || TI_EDMA || TI_K3_UDMA || COMPILE_TEST + +config SND_SOC_TI_EDMA_PCM + tristate + select SND_SOC_GENERIC_DMAENGINE_PCM + +config SND_SOC_TI_SDMA_PCM + tristate + select SND_SOC_GENERIC_DMAENGINE_PCM + +config SND_SOC_TI_UDMA_PCM + tristate + select SND_SOC_GENERIC_DMAENGINE_PCM + +comment "Texas Instruments DAI support for:" +config SND_SOC_DAVINCI_ASP + tristate "daVinci Audio Serial Port (ASP) or McBSP support" + depends on ARCH_DAVINCI || COMPILE_TEST + select SND_SOC_TI_EDMA_PCM + help + Say Y or M here if you want audio support via daVinci ASP or McBSP. + The driver only implements the ASP support which is a subset of + daVinci McBSP (w/o the multichannel support). + +config SND_SOC_DAVINCI_MCASP + tristate "Multichannel Audio Serial Port (McASP) support" + depends on COMMON_CLK + select SND_SOC_TI_EDMA_PCM + select SND_SOC_TI_SDMA_PCM + select SND_SOC_TI_UDMA_PCM + help + Say Y or M here if you want to have support for McASP IP found in + various Texas Instruments SoCs like: + - daVinci devices + - Sitara line of SoCs (AM335x, AM438x, etc) + - OMAP4 + - DRA7x devices + - Keystone devices + - K3 devices (am654, j721e) + +config SND_SOC_DAVINCI_VCIF + tristate "daVinci Voice Interface (VCIF) support" + depends on ARCH_DAVINCI || COMPILE_TEST + select SND_SOC_TI_EDMA_PCM + help + Say Y or M here if you want audio support via daVinci VCIF. + +config SND_SOC_OMAP_DMIC + tristate "Digital Microphone Module (DMIC) support" + depends on ARCH_OMAP4 || SOC_OMAP5 || COMPILE_TEST && COMMON_CLK + select SND_SOC_TI_SDMA_PCM + help + Say Y or M here if you want to have support for DMIC IP found in + OMAP4 and OMAP5. + +config SND_SOC_OMAP_MCBSP + tristate "Multichannel Buffered Serial Port (McBSP) support" + depends on ARCH_OMAP || ARCH_OMAP1 || COMPILE_TEST && COMMON_CLK + select SND_SOC_TI_SDMA_PCM + help + Say Y or M here if you want to have support for McBSP IP found in + Texas Instruments OMAP1/2/3/4/5 SoCs. + +config SND_SOC_OMAP_MCPDM + tristate "Multichannel PDM Controller (McPDM) support" + depends on ARCH_OMAP4 || SOC_OMAP5 || COMPILE_TEST + select SND_SOC_TI_SDMA_PCM + help + Say Y or M here if you want to have support for McPDM IP found in + OMAP4 and OMAP5. + +comment "Audio support for boards with Texas Instruments SoCs" +config SND_SOC_NOKIA_N810 + tristate "SoC Audio support for Nokia N810" + depends on MACH_NOKIA_N810 && I2C + select SND_SOC_OMAP_MCBSP + select SND_SOC_TLV320AIC3X + help + Say Y or M if you want to add support for SoC audio on Nokia N810. + +config SND_SOC_NOKIA_RX51 + tristate "SoC Audio support for Nokia RX-51" + depends on ARCH_OMAP3 && I2C && GPIOLIB + select SND_SOC_OMAP_MCBSP + select SND_SOC_TLV320AIC3X + select SND_SOC_TPA6130A2 + help + Say Y or M if you want to add support for SoC audio on Nokia RX-51 + hardware. This is also known as Nokia N900 product. + +config SND_SOC_OMAP3_PANDORA + tristate "SoC Audio support for OMAP3 Pandora" + depends on ARCH_OMAP3 + depends on TWL4030_CORE + select SND_SOC_OMAP_MCBSP + select SND_SOC_TWL4030 + help + Say Y or M if you want to add support for SoC audio on the OMAP3 Pandora. + +config SND_SOC_OMAP3_TWL4030 + tristate "SoC Audio support for OMAP3 based boards with twl4030 codec" + depends on ARCH_OMAP3 || COMPILE_TEST && COMMON_CLK + depends on TWL4030_CORE + select SND_SOC_OMAP_MCBSP + select SND_SOC_TWL4030 + help + Say Y or M if you want to add support for SoC audio on OMAP3 based + boards using twl4030 as codec. This driver currently supports: + - Beagleboard or Devkit8000 + - Gumstix Overo or CompuLab CM-T35/CM-T3730 + - IGEP v2 + - OMAP3EVM + - SDP3430 + - Zoom2 + +config SND_SOC_OMAP_ABE_TWL6040 + tristate "SoC Audio support for OMAP boards using ABE and twl6040 codec" + depends on TWL6040_CORE && COMMON_CLK + depends on ARCH_OMAP4 || (SOC_OMAP5 && MFD_PALMAS) || COMPILE_TEST + select SND_SOC_OMAP_DMIC + select SND_SOC_OMAP_MCPDM + select SND_SOC_TWL6040 + help + Say Y or M if you want to add support for SoC audio on OMAP boards + using ABE and twl6040 codec. This driver currently supports: + - SDP4430/Blaze boards + - PandaBoard (4430) + - PandaBoardES (4460) + - OMAP5 uEVM + +config SND_SOC_OMAP_AMS_DELTA + tristate "SoC Audio support for Amstrad E3 (Delta) videophone" + depends on MACH_AMS_DELTA && TTY + select SND_SOC_OMAP_MCBSP + select SND_SOC_CX20442 + help + Say Y or M if you want to add support for SoC audio device + connected to a handset and a speakerphone found on Amstrad E3 (Delta) + videophone. + + Note that in order to get those devices fully supported, you have to + build the kernel with standard serial port driver included and + configured for at least 4 ports. Then, from userspace, you must load + a line discipline #19 on the modem (ttyS3) serial line. The simplest + way to achieve this is to install util-linux-ng and use the included + ldattach utility. This can be started automatically from udev, + a simple rule like this one should do the trick (it does for me): + ACTION=="add", KERNEL=="controlC0", \ + RUN+="/usr/sbin/ldattach 19 /dev/ttyS3" + +config SND_SOC_OMAP_HDMI + tristate "OMAP4/5 HDMI audio support" + depends on OMAP4_DSS_HDMI || OMAP5_DSS_HDMI || COMPILE_TEST + select SND_SOC_TI_SDMA_PCM + help + For HDMI audio to work OMAPDSS HDMI support should be + enabled. + The hdmi audio driver implements cpu-dai component using the + callbacks provided by OMAPDSS and registers the component + under DSS HDMI device. Omap-pcm is registered for platform + component also under DSS HDMI device. Dummy codec is used as + as codec component. The hdmi audio driver implements also + the card and registers it under its own platform device. + The device for the driver is registered by OMAPDSS hdmi + driver. + +config SND_SOC_OMAP_OSK5912 + tristate "SoC Audio support for omap osk5912" + depends on MACH_OMAP_OSK && I2C + select SND_SOC_OMAP_MCBSP + select SND_SOC_TLV320AIC23_I2C + help + Say Y or M if you want to add support for SoC audio on osk5912. + +config SND_SOC_DAVINCI_EVM + tristate "SoC Audio support for DaVinci EVMs" + depends on ARCH_DAVINCI && I2C + select SND_SOC_DAVINCI_ASP if MACH_DAVINCI_DM355_EVM + select SND_SOC_DAVINCI_ASP if SND_SOC_DM365_AIC3X_CODEC + select SND_SOC_DAVINCI_VCIF if SND_SOC_DM365_VOICE_CODEC + select SND_SOC_DAVINCI_ASP if MACH_DAVINCI_EVM # DM6446 + select SND_SOC_DAVINCI_MCASP if MACH_DAVINCI_DM6467_EVM + select SND_SOC_SPDIF if MACH_DAVINCI_DM6467_EVM + select SND_SOC_DAVINCI_MCASP if MACH_DAVINCI_DA830_EVM + select SND_SOC_DAVINCI_MCASP if MACH_DAVINCI_DA850_EVM + select SND_SOC_TLV320AIC3X + help + Say Y if you want to add support for SoC audio on the following TI + DaVinci EVM platforms: + - DM355 + - DM365 + - DM6446 + - DM6447 + - DM830 + - DM850 + +choice + prompt "DM365 codec select" + depends on SND_SOC_DAVINCI_EVM + depends on MACH_DAVINCI_DM365_EVM + +config SND_SOC_DM365_AIC3X_CODEC + bool "Audio Codec - AIC3101" + help + Say Y if you want to add support for AIC3101 audio codec + +config SND_SOC_DM365_VOICE_CODEC + bool "Voice Codec - CQ93VC" + help + Say Y if you want to add support for SoC On-chip voice codec +endchoice + +config SND_SOC_DM365_SELECT_VOICE_CODECS + def_tristate y + depends on SND_SOC_DM365_VOICE_CODEC && SND_SOC + select MFD_DAVINCI_VOICECODEC + select SND_SOC_CQ0093VC + help + The is an internal symbol needed to ensure that the codec + and MFD driver can be built as loadable modules if necessary. + +config SND_SOC_J721E_EVM + tristate "SoC Audio support for j721e EVM" + depends on ARCH_K3 || COMPILE_TEST && COMMON_CLK + depends on I2C + select SND_SOC_PCM3168A_I2C + select SND_SOC_DAVINCI_MCASP + help + Say Y if you want to add support for SoC audio on j721e Common + Processor Board and Infotainment expansion board. +endmenu + |