diff options
Diffstat (limited to 'tools/testing/selftests/drivers/net/mlxsw')
87 files changed, 19847 insertions, 0 deletions
diff --git a/tools/testing/selftests/drivers/net/mlxsw/blackhole_routes.sh b/tools/testing/selftests/drivers/net/mlxsw/blackhole_routes.sh new file mode 100755 index 000000000..bdffe698e --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/blackhole_routes.sh @@ -0,0 +1,201 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test that blackhole routes are marked as offloaded and that packets hitting +# them are dropped by the ASIC and not by the kernel. +# +# +---------------------------------+ +# | H1 (vrf) | +# | + $h1 | +# | | 192.0.2.1/24 | +# | | 2001:db8:1::1/64 | +# | | | +# | | default via 192.0.2.2 | +# | | default via 2001:db8:1::2 | +# +----|----------------------------+ +# | +# +----|----------------------------------------------------------------------+ +# | SW | | +# | + $rp1 | +# | 192.0.2.2/24 | +# | 2001:db8:1::2/64 | +# | | +# | 2001:db8:2::2/64 | +# | 198.51.100.2/24 | +# | + $rp2 | +# | | | +# +----|----------------------------------------------------------------------+ +# | +# +----|----------------------------+ +# | | default via 198.51.100.2 | +# | | default via 2001:db8:2::2 | +# | | | +# | | 2001:db8:2::1/64 | +# | | 198.51.100.1/24 | +# | + $h2 | +# | H2 (vrf) | +# +---------------------------------+ + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + ping_ipv4 + ping_ipv6 + blackhole_ipv4 + blackhole_ipv6 +" +NUM_NETIFS=4 +: ${TIMEOUT:=20000} # ms +source $lib_dir/tc_common.sh +source $lib_dir/lib.sh + +h1_create() +{ + simple_if_init $h1 192.0.2.1/24 2001:db8:1::1/64 + + ip -4 route add default vrf v$h1 nexthop via 192.0.2.2 + ip -6 route add default vrf v$h1 nexthop via 2001:db8:1::2 +} + +h1_destroy() +{ + ip -6 route del default vrf v$h1 nexthop via 2001:db8:1::2 + ip -4 route del default vrf v$h1 nexthop via 192.0.2.2 + + simple_if_fini $h1 192.0.2.1/24 2001:db8:1::1/64 +} + +h2_create() +{ + simple_if_init $h2 198.51.100.1/24 2001:db8:2::1/64 + + ip -4 route add default vrf v$h2 nexthop via 198.51.100.2 + ip -6 route add default vrf v$h2 nexthop via 2001:db8:2::2 +} + +h2_destroy() +{ + ip -6 route del default vrf v$h2 nexthop via 2001:db8:2::2 + ip -4 route del default vrf v$h2 nexthop via 198.51.100.2 + + simple_if_fini $h2 198.51.100.1/24 2001:db8:2::1/64 +} + +router_create() +{ + ip link set dev $rp1 up + ip link set dev $rp2 up + + tc qdisc add dev $rp1 clsact + + __addr_add_del $rp1 add 192.0.2.2/24 2001:db8:1::2/64 + __addr_add_del $rp2 add 198.51.100.2/24 2001:db8:2::2/64 +} + +router_destroy() +{ + __addr_add_del $rp2 del 198.51.100.2/24 2001:db8:2::2/64 + __addr_add_del $rp1 del 192.0.2.2/24 2001:db8:1::2/64 + + tc qdisc del dev $rp1 clsact + + ip link set dev $rp2 down + ip link set dev $rp1 down +} + +ping_ipv4() +{ + ping_test $h1 198.51.100.1 ": h1->h2" +} + +ping_ipv6() +{ + ping6_test $h1 2001:db8:2::1 ": h1->h2" +} + +blackhole_ipv4() +{ + # Transmit packets from H1 to H2 and make sure they are dropped by the + # ASIC and not by the kernel + RET=0 + + ip -4 route add blackhole 198.51.100.0/30 + tc filter add dev $rp1 ingress protocol ip pref 1 handle 101 flower \ + skip_hw dst_ip 198.51.100.1 src_ip 192.0.2.1 ip_proto icmp \ + action pass + + busywait "$TIMEOUT" wait_for_offload ip -4 route show 198.51.100.0/30 + check_err $? "route not marked as offloaded when should" + + ping_do $h1 198.51.100.1 + check_fail $? "ping passed when should not" + + tc_check_packets "dev $rp1 ingress" 101 0 + check_err $? "packets trapped and not dropped by ASIC" + + log_test "IPv4 blackhole route" + + tc filter del dev $rp1 ingress protocol ip pref 1 handle 101 flower + ip -4 route del blackhole 198.51.100.0/30 +} + +blackhole_ipv6() +{ + RET=0 + + ip -6 route add blackhole 2001:db8:2::/120 + tc filter add dev $rp1 ingress protocol ipv6 pref 1 handle 101 flower \ + skip_hw dst_ip 2001:db8:2::1 src_ip 2001:db8:1::1 \ + ip_proto icmpv6 action pass + + busywait "$TIMEOUT" wait_for_offload ip -6 route show 2001:db8:2::/120 + check_err $? "route not marked as offloaded when should" + + ping6_do $h1 2001:db8:2::1 + check_fail $? "ping passed when should not" + + tc_check_packets "dev $rp1 ingress" 101 0 + check_err $? "packets trapped and not dropped by ASIC" + + log_test "IPv6 blackhole route" + + tc filter del dev $rp1 ingress protocol ipv6 pref 1 handle 101 flower + ip -6 route del blackhole 2001:db8:2::/120 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + rp1=${NETIFS[p2]} + + rp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + vrf_prepare + forwarding_enable + + h1_create + h2_create + router_create +} + +cleanup() +{ + pre_cleanup + + router_destroy + h2_destroy + h1_destroy + + forwarding_restore + vrf_cleanup +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/devlink_linecard.sh b/tools/testing/selftests/drivers/net/mlxsw/devlink_linecard.sh new file mode 100755 index 000000000..224ca3695 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/devlink_linecard.sh @@ -0,0 +1,334 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# In addition to the common variables, user might use: +# LC_SLOT - If not set, all probed line cards are going to be tested, +# with an exception of the "activation_16x100G_test". +# It set, only the selected line card is going to be used +# for tests, including "activation_16x100G_test". + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + unprovision_test + provision_test + activation_16x100G_test +" + +NUM_NETIFS=0 + +source $lib_dir/lib.sh +source $lib_dir/devlink_lib.sh + +until_lc_state_is() +{ + local state=$1; shift + local current=$("$@") + + echo "$current" + [ "$current" == "$state" ] +} + +until_lc_state_is_not() +{ + ! until_lc_state_is "$@" +} + +lc_state_get() +{ + local lc=$1 + + devlink lc show $DEVLINK_DEV lc $lc -j | jq -e -r ".[][][].state" +} + +lc_wait_until_state_changes() +{ + local lc=$1 + local state=$2 + local timeout=$3 # ms + + busywait "$timeout" until_lc_state_is_not "$state" lc_state_get "$lc" +} + +lc_wait_until_state_becomes() +{ + local lc=$1 + local state=$2 + local timeout=$3 # ms + + busywait "$timeout" until_lc_state_is "$state" lc_state_get "$lc" +} + +until_lc_port_count_is() +{ + local port_count=$1; shift + local current=$("$@") + + echo "$current" + [ $current == $port_count ] +} + +lc_port_count_get() +{ + local lc=$1 + + devlink port -j | jq -e -r ".[][] | select(.lc==$lc) | .port" | wc -l +} + +lc_wait_until_port_count_is() +{ + local lc=$1 + local port_count=$2 + local timeout=$3 # ms + + busywait "$timeout" until_lc_port_count_is "$port_count" lc_port_count_get "$lc" +} + +lc_nested_devlink_dev_get() +{ + local lc=$1 + + devlink lc show $DEVLINK_DEV lc $lc -j | jq -e -r ".[][][].nested_devlink" +} + +PROV_UNPROV_TIMEOUT=8000 # ms +POST_PROV_ACT_TIMEOUT=2000 # ms +PROV_PORTS_INSTANTIATION_TIMEOUT=15000 # ms + +unprovision_one() +{ + local lc=$1 + local state + + state=$(lc_state_get $lc) + check_err $? "Failed to get state of linecard $lc" + if [[ "$state" == "unprovisioned" ]]; then + return + fi + + log_info "Unprovisioning linecard $lc" + + devlink lc set $DEVLINK_DEV lc $lc notype + check_err $? "Failed to trigger linecard $lc unprovisioning" + + state=$(lc_wait_until_state_changes $lc "unprovisioning" \ + $PROV_UNPROV_TIMEOUT) + check_err $? "Failed to unprovision linecard $lc (timeout)" + + [ "$state" == "unprovisioned" ] + check_err $? "Failed to unprovision linecard $lc (state=$state)" +} + +provision_one() +{ + local lc=$1 + local type=$2 + local state + + log_info "Provisioning linecard $lc" + + devlink lc set $DEVLINK_DEV lc $lc type $type + check_err $? "Failed trigger linecard $lc provisioning" + + state=$(lc_wait_until_state_changes $lc "provisioning" \ + $PROV_UNPROV_TIMEOUT) + check_err $? "Failed to provision linecard $lc (timeout)" + + [ "$state" == "provisioned" ] || [ "$state" == "active" ] + check_err $? "Failed to provision linecard $lc (state=$state)" + + provisioned_type=$(devlink lc show $DEVLINK_DEV lc $lc -j | jq -e -r ".[][][].type") + [ "$provisioned_type" == "$type" ] + check_err $? "Wrong provision type returned for linecard $lc (got \"$provisioned_type\", expected \"$type\")" + + # Wait for possible activation to make sure the state + # won't change after return from this function. + state=$(lc_wait_until_state_becomes $lc "active" \ + $POST_PROV_ACT_TIMEOUT) +} + +unprovision_test() +{ + RET=0 + local lc + + lc=$LC_SLOT + unprovision_one $lc + log_test "Unprovision" +} + +LC_16X100G_TYPE="16x100G" +LC_16X100G_PORT_COUNT=16 + +supported_types_check() +{ + local lc=$1 + local supported_types_count + local type_index + local lc_16x100_found=false + + supported_types_count=$(devlink lc show $DEVLINK_DEV lc $lc -j | \ + jq -e -r ".[][][].supported_types | length") + [ $supported_types_count != 0 ] + check_err $? "No supported types found for linecard $lc" + for (( type_index=0; type_index<$supported_types_count; type_index++ )) + do + type=$(devlink lc show $DEVLINK_DEV lc $lc -j | \ + jq -e -r ".[][][].supported_types[$type_index]") + if [[ "$type" == "$LC_16X100G_TYPE" ]]; then + lc_16x100_found=true + break + fi + done + [ $lc_16x100_found = true ] + check_err $? "16X100G not found between supported types of linecard $lc" +} + +ports_check() +{ + local lc=$1 + local expected_port_count=$2 + local port_count + + port_count=$(lc_wait_until_port_count_is $lc $expected_port_count \ + $PROV_PORTS_INSTANTIATION_TIMEOUT) + [ $port_count != 0 ] + check_err $? "No port associated with linecard $lc" + [ $port_count == $expected_port_count ] + check_err $? "Unexpected port count linecard $lc (got $port_count, expected $expected_port_count)" +} + +lc_dev_info_provisioned_check() +{ + local lc=$1 + local nested_devlink_dev=$2 + local fixed_hw_revision + local running_ini_version + + fixed_hw_revision=$(devlink dev info $nested_devlink_dev -j | \ + jq -e -r '.[][].versions.fixed."hw.revision"') + check_err $? "Failed to get linecard $lc fixed.hw.revision" + log_info "Linecard $lc fixed.hw.revision: \"$fixed_hw_revision\"" + running_ini_version=$(devlink dev info $nested_devlink_dev -j | \ + jq -e -r '.[][].versions.running."ini.version"') + check_err $? "Failed to get linecard $lc running.ini.version" + log_info "Linecard $lc running.ini.version: \"$running_ini_version\"" +} + +provision_test() +{ + RET=0 + local lc + local type + local state + local nested_devlink_dev + + lc=$LC_SLOT + supported_types_check $lc + state=$(lc_state_get $lc) + check_err $? "Failed to get state of linecard $lc" + if [[ "$state" != "unprovisioned" ]]; then + unprovision_one $lc + fi + provision_one $lc $LC_16X100G_TYPE + ports_check $lc $LC_16X100G_PORT_COUNT + + nested_devlink_dev=$(lc_nested_devlink_dev_get $lc) + check_err $? "Failed to get nested devlink handle of linecard $lc" + lc_dev_info_provisioned_check $lc $nested_devlink_dev + + log_test "Provision" +} + +ACTIVATION_TIMEOUT=20000 # ms + +interface_check() +{ + ip link set $h1 up + ip link set $h2 up + ifaces_upped=true + setup_wait +} + +lc_dev_info_active_check() +{ + local lc=$1 + local nested_devlink_dev=$2 + local fixed_device_fw_psid + local running_device_fw + + fixed_device_fw_psid=$(devlink dev info $nested_devlink_dev -j | \ + jq -e -r ".[][].versions.fixed" | \ + jq -e -r '."fw.psid"') + check_err $? "Failed to get linecard $lc fixed fw PSID" + log_info "Linecard $lc fixed.fw.psid: \"$fixed_device_fw_psid\"" + + running_device_fw=$(devlink dev info $nested_devlink_dev -j | \ + jq -e -r ".[][].versions.running.fw") + check_err $? "Failed to get linecard $lc running.fw.version" + log_info "Linecard $lc running.fw: \"$running_device_fw\"" +} + +activation_16x100G_test() +{ + RET=0 + local lc + local type + local state + local nested_devlink_dev + + lc=$LC_SLOT + type=$LC_16X100G_TYPE + + unprovision_one $lc + provision_one $lc $type + state=$(lc_wait_until_state_becomes $lc "active" \ + $ACTIVATION_TIMEOUT) + check_err $? "Failed to get linecard $lc activated (timeout)" + + interface_check + + nested_devlink_dev=$(lc_nested_devlink_dev_get $lc) + check_err $? "Failed to get nested devlink handle of linecard $lc" + lc_dev_info_active_check $lc $nested_devlink_dev + + log_test "Activation 16x100G" +} + +setup_prepare() +{ + local lc_num=$(devlink lc show -j | jq -e -r ".[][\"$DEVLINK_DEV\"] |length") + if [[ $? -ne 0 ]] || [[ $lc_num -eq 0 ]]; then + echo "SKIP: No linecard support found" + exit $ksft_skip + fi + + if [ -z "$LC_SLOT" ]; then + echo "SKIP: \"LC_SLOT\" variable not provided" + exit $ksft_skip + fi + + # Interfaces are not present during the script start, + # that's why we define NUM_NETIFS here so dummy + # implicit veth pairs are not created. + NUM_NETIFS=2 + h1=${NETIFS[p1]} + h2=${NETIFS[p2]} + ifaces_upped=false +} + +cleanup() +{ + if [ "$ifaces_upped" = true ] ; then + ip link set $h1 down + ip link set $h2 down + fi +} + +trap cleanup EXIT + +setup_prepare + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/devlink_trap.sh b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap.sh new file mode 100755 index 000000000..89b55e946 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap.sh @@ -0,0 +1,129 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test generic devlink-trap functionality over mlxsw. These tests are not +# specific to a single trap, but do not check the devlink-trap common +# infrastructure either. + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + dev_del_test +" +NUM_NETIFS=4 +source $lib_dir/tc_common.sh +source $lib_dir/lib.sh +source $lib_dir/devlink_lib.sh + +h1_create() +{ + simple_if_init $h1 +} + +h1_destroy() +{ + simple_if_fini $h1 +} + +h2_create() +{ + simple_if_init $h2 +} + +h2_destroy() +{ + simple_if_fini $h2 +} + +switch_create() +{ + ip link add dev br0 type bridge vlan_filtering 1 mcast_snooping 0 + + ip link set dev $swp1 master br0 + ip link set dev $swp2 master br0 + + ip link set dev br0 up + ip link set dev $swp1 up + ip link set dev $swp2 up +} + +switch_destroy() +{ + ip link set dev $swp2 down + ip link set dev $swp1 down + + ip link del dev br0 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + vrf_prepare + + h1_create + h2_create + + switch_create +} + +cleanup() +{ + pre_cleanup + + switch_destroy + + h2_destroy + h1_destroy + + vrf_cleanup +} + +dev_del_test() +{ + local trap_name="source_mac_is_multicast" + local smac=01:02:03:04:05:06 + local num_iter=5 + local mz_pid + local i + + $MZ $h1 -c 0 -p 100 -a $smac -b bcast -t ip -q & + mz_pid=$! + + # The purpose of this test is to make sure we correctly dismantle a + # port while packets are trapped from it. This is done by reloading the + # the driver while the 'ingress_smac_mc_drop' trap is triggered. + RET=0 + + for i in $(seq 1 $num_iter); do + log_info "Iteration $i / $num_iter" + + devlink_trap_action_set $trap_name "trap" + sleep 1 + + devlink_reload + # Allow netdevices to be re-created following the reload + sleep 20 + + cleanup + setup_prepare + setup_wait + done + + log_test "Device delete" + + kill $mz_pid && wait $mz_pid &> /dev/null +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_acl_drops.sh b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_acl_drops.sh new file mode 100755 index 000000000..b32ba5fec --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_acl_drops.sh @@ -0,0 +1,151 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test devlink-trap ACL drops functionality over mlxsw. + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + ingress_flow_action_drop_test + egress_flow_action_drop_test +" +NUM_NETIFS=4 +source $lib_dir/tc_common.sh +source $lib_dir/lib.sh +source $lib_dir/devlink_lib.sh + +h1_create() +{ + simple_if_init $h1 +} + +h1_destroy() +{ + simple_if_fini $h1 +} + +h2_create() +{ + simple_if_init $h2 +} + +h2_destroy() +{ + simple_if_fini $h2 +} + +switch_create() +{ + ip link add dev br0 type bridge vlan_filtering 1 mcast_snooping 0 + + ip link set dev $swp1 master br0 + ip link set dev $swp2 master br0 + + ip link set dev br0 up + ip link set dev $swp1 up + ip link set dev $swp2 up + + tc qdisc add dev $swp1 clsact + tc qdisc add dev $swp2 clsact +} + +switch_destroy() +{ + tc qdisc del dev $swp2 clsact + tc qdisc del dev $swp1 clsact + + ip link set dev $swp2 down + ip link set dev $swp1 down + + ip link del dev br0 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + h1mac=$(mac_get $h1) + h2mac=$(mac_get $h2) + + vrf_prepare + + h1_create + h2_create + + switch_create +} + +cleanup() +{ + pre_cleanup + + switch_destroy + + h2_destroy + h1_destroy + + vrf_cleanup +} + +ingress_flow_action_drop_test() +{ + local mz_pid + + tc filter add dev $swp2 egress protocol ip pref 1 handle 101 \ + flower src_mac $h1mac action pass + + tc filter add dev $swp1 ingress protocol ip pref 1 handle 101 \ + flower dst_ip 192.0.2.2 action drop + + $MZ $h1 -c 0 -p 100 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -d 1msec -q & + mz_pid=$! + + RET=0 + + devlink_trap_drop_test ingress_flow_action_drop $swp2 101 + + log_test "ingress_flow_action_drop" + + tc filter del dev $swp1 ingress protocol ip pref 1 handle 101 flower + + devlink_trap_drop_cleanup $mz_pid $swp2 ip 1 101 +} + +egress_flow_action_drop_test() +{ + local mz_pid + + tc filter add dev $swp2 egress protocol ip pref 2 handle 102 \ + flower src_mac $h1mac action pass + + tc filter add dev $swp2 egress protocol ip pref 1 handle 101 \ + flower dst_ip 192.0.2.2 action drop + + $MZ $h1 -c 0 -p 100 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -d 1msec -q & + mz_pid=$! + + RET=0 + + devlink_trap_drop_test egress_flow_action_drop $swp2 102 + + log_test "egress_flow_action_drop" + + tc filter del dev $swp2 egress protocol ip pref 1 handle 101 flower + + devlink_trap_drop_cleanup $mz_pid $swp2 ip 2 102 +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_control.sh b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_control.sh new file mode 100755 index 000000000..d3a891d42 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_control.sh @@ -0,0 +1,687 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test devlink-trap control trap functionality over mlxsw. Each registered +# control packet trap is tested to make sure it is triggered under the right +# conditions. +# +# +---------------------------------+ +# | H1 (vrf) | +# | + $h1 | +# | | 192.0.2.1/24 | +# | | 2001:db8:1::1/64 | +# | | | +# | | default via 192.0.2.2 | +# | | default via 2001:db8:1::2 | +# +----|----------------------------+ +# | +# +----|----------------------------------------------------------------------+ +# | SW | | +# | + $rp1 | +# | 192.0.2.2/24 | +# | 2001:db8:1::2/64 | +# | | +# | 2001:db8:2::2/64 | +# | 198.51.100.2/24 | +# | + $rp2 | +# | | | +# +----|----------------------------------------------------------------------+ +# | +# +----|----------------------------+ +# | | default via 198.51.100.2 | +# | | default via 2001:db8:2::2 | +# | | | +# | | 2001:db8:2::1/64 | +# | | 198.51.100.1/24 | +# | + $h2 | +# | H2 (vrf) | +# +---------------------------------+ + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + stp_test + lacp_test + lldp_test + igmp_query_test + igmp_v1_report_test + igmp_v2_report_test + igmp_v3_report_test + igmp_v2_leave_test + mld_query_test + mld_v1_report_test + mld_v2_report_test + mld_v1_done_test + ipv4_dhcp_test + ipv6_dhcp_test + arp_request_test + arp_response_test + ipv6_neigh_solicit_test + ipv6_neigh_advert_test + ipv4_bfd_test + ipv6_bfd_test + ipv4_ospf_test + ipv6_ospf_test + ipv4_bgp_test + ipv6_bgp_test + ipv4_vrrp_test + ipv6_vrrp_test + ipv4_pim_test + ipv6_pim_test + uc_loopback_test + local_route_test + external_route_test + ipv6_uc_dip_link_local_scope_test + ipv4_router_alert_test + ipv6_router_alert_test + ipv6_dip_all_nodes_test + ipv6_dip_all_routers_test + ipv6_router_solicit_test + ipv6_router_advert_test + ipv6_redirect_test + ptp_event_test + ptp_general_test + flow_action_sample_test + flow_action_trap_test +" +NUM_NETIFS=4 +source $lib_dir/lib.sh +source $lib_dir/devlink_lib.sh +source mlxsw_lib.sh + +h1_create() +{ + simple_if_init $h1 192.0.2.1/24 2001:db8:1::1/64 + + ip -4 route add default vrf v$h1 nexthop via 192.0.2.2 + ip -6 route add default vrf v$h1 nexthop via 2001:db8:1::2 +} + +h1_destroy() +{ + ip -6 route del default vrf v$h1 nexthop via 2001:db8:1::2 + ip -4 route del default vrf v$h1 nexthop via 192.0.2.2 + + simple_if_fini $h1 192.0.2.1/24 2001:db8:1::1/64 +} + +h2_create() +{ + simple_if_init $h2 198.51.100.1/24 2001:db8:2::1/64 + + ip -4 route add default vrf v$h2 nexthop via 198.51.100.2 + ip -6 route add default vrf v$h2 nexthop via 2001:db8:2::2 +} + +h2_destroy() +{ + ip -6 route del default vrf v$h2 nexthop via 2001:db8:2::2 + ip -4 route del default vrf v$h2 nexthop via 198.51.100.2 + + simple_if_fini $h2 198.51.100.1/24 2001:db8:2::1/64 +} + +router_create() +{ + ip link set dev $rp1 up + ip link set dev $rp2 up + + __addr_add_del $rp1 add 192.0.2.2/24 2001:db8:1::2/64 + __addr_add_del $rp2 add 198.51.100.2/24 2001:db8:2::2/64 +} + +router_destroy() +{ + __addr_add_del $rp2 del 198.51.100.2/24 2001:db8:2::2/64 + __addr_add_del $rp1 del 192.0.2.2/24 2001:db8:1::2/64 + + ip link set dev $rp2 down + ip link set dev $rp1 down +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + rp1=${NETIFS[p2]} + + rp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + vrf_prepare + forwarding_enable + + h1_create + h2_create + router_create +} + +cleanup() +{ + pre_cleanup + + router_destroy + h2_destroy + h1_destroy + + forwarding_restore + vrf_cleanup +} + +stp_test() +{ + devlink_trap_stats_test "STP" "stp" $MZ $h1 -c 1 -t bpdu -q +} + +lacp_payload_get() +{ + local source_mac=$1; shift + local p + + p=$(: + )"01:80:C2:00:00:02:"$( : ETH daddr + )"$source_mac:"$( : ETH saddr + )"88:09:"$( : ETH type + ) + echo $p +} + +lacp_test() +{ + local h1mac=$(mac_get $h1) + + devlink_trap_stats_test "LACP" "lacp" $MZ $h1 -c 1 \ + $(lacp_payload_get $h1mac) -p 100 -q +} + +lldp_payload_get() +{ + local source_mac=$1; shift + local p + + p=$(: + )"01:80:C2:00:00:0E:"$( : ETH daddr + )"$source_mac:"$( : ETH saddr + )"88:CC:"$( : ETH type + ) + echo $p +} + +lldp_test() +{ + local h1mac=$(mac_get $h1) + + devlink_trap_stats_test "LLDP" "lldp" $MZ $h1 -c 1 \ + $(lldp_payload_get $h1mac) -p 100 -q +} + +igmp_query_test() +{ + # IGMP (IP Protocol 2) Membership Query (Type 0x11) + devlink_trap_stats_test "IGMP Membership Query" "igmp_query" \ + $MZ $h1 -c 1 -a own -b 01:00:5E:00:00:01 \ + -A 192.0.2.1 -B 224.0.0.1 -t ip proto=2,p=11 -p 100 -q +} + +igmp_v1_report_test() +{ + # IGMP (IP Protocol 2) Version 1 Membership Report (Type 0x12) + devlink_trap_stats_test "IGMP Version 1 Membership Report" \ + "igmp_v1_report" $MZ $h1 -c 1 -a own -b 01:00:5E:00:00:01 \ + -A 192.0.2.1 -B 244.0.0.1 -t ip proto=2,p=12 -p 100 -q +} + +igmp_v2_report_test() +{ + # IGMP (IP Protocol 2) Version 2 Membership Report (Type 0x16) + devlink_trap_stats_test "IGMP Version 2 Membership Report" \ + "igmp_v2_report" $MZ $h1 -c 1 -a own -b 01:00:5E:00:00:01 \ + -A 192.0.2.1 -B 244.0.0.1 -t ip proto=2,p=16 -p 100 -q +} + +igmp_v3_report_test() +{ + # IGMP (IP Protocol 2) Version 3 Membership Report (Type 0x22) + devlink_trap_stats_test "IGMP Version 3 Membership Report" \ + "igmp_v3_report" $MZ $h1 -c 1 -a own -b 01:00:5E:00:00:01 \ + -A 192.0.2.1 -B 244.0.0.1 -t ip proto=2,p=22 -p 100 -q +} + +igmp_v2_leave_test() +{ + # IGMP (IP Protocol 2) Version 2 Leave Group (Type 0x17) + devlink_trap_stats_test "IGMP Version 2 Leave Group" \ + "igmp_v2_leave" $MZ $h1 -c 1 -a own -b 01:00:5E:00:00:02 \ + -A 192.0.2.1 -B 224.0.0.2 -t ip proto=2,p=17 -p 100 -q +} + +mld_payload_get() +{ + local type=$1; shift + local p + + type=$(printf "%x" $type) + p=$(: + )"3A:"$( : Next Header - ICMPv6 + )"00:"$( : Hdr Ext Len + )"00:00:00:00:00:00:"$( : Options and Padding + )"$type:"$( : ICMPv6.type + )"00:"$( : ICMPv6.code + )"00:"$( : ICMPv6.checksum + ) + echo $p +} + +mld_query_test() +{ + # MLD Multicast Listener Query (Type 130) + devlink_trap_stats_test "MLD Multicast Listener Query" "mld_query" \ + $MZ $h1 -6 -c 1 -A fe80::1 -B ff02::1 \ + -t ip hop=1,next=0,payload=$(mld_payload_get 130) -p 100 -q +} + +mld_v1_report_test() +{ + # MLD Version 1 Multicast Listener Report (Type 131) + devlink_trap_stats_test "MLD Version 1 Multicast Listener Report" \ + "mld_v1_report" $MZ $h1 -6 -c 1 -A fe80::1 -B ff02::16 \ + -t ip hop=1,next=0,payload=$(mld_payload_get 131) -p 100 -q +} + +mld_v2_report_test() +{ + # MLD Version 2 Multicast Listener Report (Type 143) + devlink_trap_stats_test "MLD Version 2 Multicast Listener Report" \ + "mld_v2_report" $MZ $h1 -6 -c 1 -A fe80::1 -B ff02::16 \ + -t ip hop=1,next=0,payload=$(mld_payload_get 143) -p 100 -q +} + +mld_v1_done_test() +{ + # MLD Version 1 Multicast Listener Done (Type 132) + devlink_trap_stats_test "MLD Version 1 Multicast Listener Done" \ + "mld_v1_done" $MZ $h1 -6 -c 1 -A fe80::1 -B ff02::16 \ + -t ip hop=1,next=0,payload=$(mld_payload_get 132) -p 100 -q +} + +ipv4_dhcp_test() +{ + devlink_trap_stats_test "IPv4 DHCP Port 67" "ipv4_dhcp" \ + $MZ $h1 -c 1 -a own -b bcast -A 0.0.0.0 -B 255.255.255.255 \ + -t udp sp=68,dp=67 -p 100 -q + + devlink_trap_stats_test "IPv4 DHCP Port 68" "ipv4_dhcp" \ + $MZ $h1 -c 1 -a own -b $(mac_get $rp1) -A 192.0.2.1 \ + -B 255.255.255.255 -t udp sp=67,dp=68 -p 100 -q +} + +ipv6_dhcp_test() +{ + devlink_trap_stats_test "IPv6 DHCP Port 547" "ipv6_dhcp" \ + $MZ $h1 -6 -c 1 -A fe80::1 -B ff02::1:2 -t udp sp=546,dp=547 \ + -p 100 -q + + devlink_trap_stats_test "IPv6 DHCP Port 546" "ipv6_dhcp" \ + $MZ $h1 -6 -c 1 -A fe80::1 -B ff02::1:2 -t udp sp=547,dp=546 \ + -p 100 -q +} + +arp_request_test() +{ + devlink_trap_stats_test "ARP Request" "arp_request" \ + $MZ $h1 -c 1 -a own -b bcast -t arp request -p 100 -q +} + +arp_response_test() +{ + devlink_trap_stats_test "ARP Response" "arp_response" \ + $MZ $h1 -c 1 -a own -b $(mac_get $rp1) -t arp reply -p 100 -q +} + +icmpv6_header_get() +{ + local type=$1; shift + local p + + type=$(printf "%x" $type) + p=$(: + )"$type:"$( : ICMPv6.type + )"00:"$( : ICMPv6.code + )"00:"$( : ICMPv6.checksum + ) + echo $p +} + +ipv6_neigh_solicit_test() +{ + devlink_trap_stats_test "IPv6 Neighbour Solicitation" \ + "ipv6_neigh_solicit" $MZ $h1 -6 -c 1 \ + -A fe80::1 -B ff02::1:ff00:02 \ + -t ip hop=1,next=58,payload=$(icmpv6_header_get 135) -p 100 -q +} + +ipv6_neigh_advert_test() +{ + devlink_trap_stats_test "IPv6 Neighbour Advertisement" \ + "ipv6_neigh_advert" $MZ $h1 -6 -c 1 -a own -b $(mac_get $rp1) \ + -A fe80::1 -B 2001:db8:1::2 \ + -t ip hop=1,next=58,payload=$(icmpv6_header_get 136) -p 100 -q +} + +ipv4_bfd_test() +{ + devlink_trap_stats_test "IPv4 BFD Control - Port 3784" "ipv4_bfd" \ + $MZ $h1 -c 1 -a own -b $(mac_get $rp1) \ + -A 192.0.2.1 -B 192.0.2.2 -t udp sp=49153,dp=3784 -p 100 -q + + devlink_trap_stats_test "IPv4 BFD Echo - Port 3785" "ipv4_bfd" \ + $MZ $h1 -c 1 -a own -b $(mac_get $rp1) \ + -A 192.0.2.1 -B 192.0.2.2 -t udp sp=49153,dp=3785 -p 100 -q +} + +ipv6_bfd_test() +{ + devlink_trap_stats_test "IPv6 BFD Control - Port 3784" "ipv6_bfd" \ + $MZ $h1 -6 -c 1 -a own -b $(mac_get $rp1) \ + -A 2001:db8:1::1 -B 2001:db8:1::2 \ + -t udp sp=49153,dp=3784 -p 100 -q + + devlink_trap_stats_test "IPv6 BFD Echo - Port 3785" "ipv6_bfd" \ + $MZ $h1 -6 -c 1 -a own -b $(mac_get $rp1) \ + -A 2001:db8:1::1 -B 2001:db8:1::2 \ + -t udp sp=49153,dp=3785 -p 100 -q +} + +ipv4_ospf_test() +{ + devlink_trap_stats_test "IPv4 OSPF - Multicast" "ipv4_ospf" \ + $MZ $h1 -c 1 -a own -b 01:00:5e:00:00:05 \ + -A 192.0.2.1 -B 224.0.0.5 -t ip proto=89 -p 100 -q + + devlink_trap_stats_test "IPv4 OSPF - Unicast" "ipv4_ospf" \ + $MZ $h1 -c 1 -a own -b $(mac_get $rp1) \ + -A 192.0.2.1 -B 192.0.2.2 -t ip proto=89 -p 100 -q +} + +ipv6_ospf_test() +{ + devlink_trap_stats_test "IPv6 OSPF - Multicast" "ipv6_ospf" \ + $MZ $h1 -6 -c 1 -a own -b 33:33:00:00:00:05 \ + -A fe80::1 -B ff02::5 -t ip next=89 -p 100 -q + + devlink_trap_stats_test "IPv6 OSPF - Unicast" "ipv6_ospf" \ + $MZ $h1 -6 -c 1 -a own -b $(mac_get $rp1) \ + -A 2001:db8:1::1 -B 2001:db8:1::2 -t ip next=89 -p 100 -q +} + +ipv4_bgp_test() +{ + devlink_trap_stats_test "IPv4 BGP" "ipv4_bgp" \ + $MZ $h1 -c 1 -a own -b $(mac_get $rp1) \ + -A 192.0.2.1 -B 192.0.2.2 -t tcp sp=54321,dp=179,flags=rst \ + -p 100 -q +} + +ipv6_bgp_test() +{ + devlink_trap_stats_test "IPv6 BGP" "ipv6_bgp" \ + $MZ $h1 -6 -c 1 -a own -b $(mac_get $rp1) \ + -A 2001:db8:1::1 -B 2001:db8:1::2 \ + -t tcp sp=54321,dp=179,flags=rst -p 100 -q +} + +ipv4_vrrp_test() +{ + devlink_trap_stats_test "IPv4 VRRP" "ipv4_vrrp" \ + $MZ $h1 -c 1 -a own -b 01:00:5e:00:00:12 \ + -A 192.0.2.1 -B 224.0.0.18 -t ip proto=112 -p 100 -q +} + +ipv6_vrrp_test() +{ + devlink_trap_stats_test "IPv6 VRRP" "ipv6_vrrp" \ + $MZ $h1 -6 -c 1 -a own -b 33:33:00:00:00:12 \ + -A fe80::1 -B ff02::12 -t ip next=112 -p 100 -q +} + +ipv4_pim_test() +{ + devlink_trap_stats_test "IPv4 PIM - Multicast" "ipv4_pim" \ + $MZ $h1 -c 1 -a own -b 01:00:5e:00:00:0d \ + -A 192.0.2.1 -B 224.0.0.13 -t ip proto=103 -p 100 -q + + devlink_trap_stats_test "IPv4 PIM - Unicast" "ipv4_pim" \ + $MZ $h1 -c 1 -a own -b $(mac_get $rp1) \ + -A 192.0.2.1 -B 192.0.2.2 -t ip proto=103 -p 100 -q +} + +ipv6_pim_test() +{ + devlink_trap_stats_test "IPv6 PIM - Multicast" "ipv6_pim" \ + $MZ $h1 -6 -c 1 -a own -b 33:33:00:00:00:0d \ + -A fe80::1 -B ff02::d -t ip next=103 -p 100 -q + + devlink_trap_stats_test "IPv6 PIM - Unicast" "ipv6_pim" \ + $MZ $h1 -6 -c 1 -a own -b $(mac_get $rp1) \ + -A fe80::1 -B 2001:db8:1::2 -t ip next=103 -p 100 -q +} + +uc_loopback_test() +{ + # Add neighbours to the fake destination IPs, so that the packets are + # routed in the device and not trapped due to an unresolved neighbour + # exception. + ip -4 neigh add 192.0.2.3 lladdr 00:11:22:33:44:55 nud permanent \ + dev $rp1 + ip -6 neigh add 2001:db8:1::3 lladdr 00:11:22:33:44:55 nud permanent \ + dev $rp1 + + devlink_trap_stats_test "IPv4 Unicast Loopback" "uc_loopback" \ + $MZ $h1 -c 1 -a own -b $(mac_get $rp1) \ + -A 192.0.2.1 -B 192.0.2.3 -t udp sp=54321,dp=12345 -p 100 -q + + devlink_trap_stats_test "IPv6 Unicast Loopback" "uc_loopback" \ + $MZ $h1 -6 -c 1 -a own -b $(mac_get $rp1) \ + -A 2001:db8:1::1 -B 2001:db8:1::3 -t udp sp=54321,dp=12345 \ + -p 100 -q + + ip -6 neigh del 2001:db8:1::3 dev $rp1 + ip -4 neigh del 192.0.2.3 dev $rp1 +} + +local_route_test() +{ + # Use a fake source IP to prevent the trap from being triggered twice + # when the router sends back a port unreachable message. + devlink_trap_stats_test "IPv4 Local Route" "local_route" \ + $MZ $h1 -c 1 -a own -b $(mac_get $rp1) \ + -A 192.0.2.3 -B 192.0.2.2 -t udp sp=54321,dp=12345 -p 100 -q + + devlink_trap_stats_test "IPv6 Local Route" "local_route" \ + $MZ $h1 -6 -c 1 -a own -b $(mac_get $rp1) \ + -A 2001:db8:1::3 -B 2001:db8:1::2 -t udp sp=54321,sp=12345 \ + -p 100 -q +} + +external_route_test() +{ + # Add a dummy device through which the incoming packets should be + # routed. + ip link add name dummy10 up type dummy + ip address add 203.0.113.1/24 dev dummy10 + ip -6 address add 2001:db8:10::1/64 dev dummy10 + + devlink_trap_stats_test "IPv4 External Route" "external_route" \ + $MZ $h1 -c 1 -a own -b $(mac_get $rp1) \ + -A 192.0.2.1 -B 203.0.113.2 -t udp sp=54321,dp=12345 -p 100 -q + + devlink_trap_stats_test "IPv6 External Route" "external_route" \ + $MZ $h1 -6 -c 1 -a own -b $(mac_get $rp1) \ + -A 2001:db8:1::1 -B 2001:db8:10::2 -t udp sp=54321,sp=12345 \ + -p 100 -q + + ip -6 address del 2001:db8:10::1/64 dev dummy10 + ip address del 203.0.113.1/24 dev dummy10 + ip link del dev dummy10 +} + +ipv6_uc_dip_link_local_scope_test() +{ + # Add a dummy link-local prefix route to allow the packet to be routed. + ip -6 route add fe80:1::/64 dev $rp2 + + devlink_trap_stats_test \ + "IPv6 Unicast Destination IP With Link-Local Scope" \ + "ipv6_uc_dip_link_local_scope" \ + $MZ $h1 -6 -c 1 -a own -b $(mac_get $rp1) \ + -A fe80::1 -B fe80:1::2 -t udp sp=54321,sp=12345 \ + -p 100 -q + + ip -6 route del fe80:1::/64 dev $rp2 +} + +ipv4_router_alert_get() +{ + local p + + # https://en.wikipedia.org/wiki/IPv4#Options + p=$(: + )"94:"$( : Option Number + )"04:"$( : Option Length + )"00:00:"$( : Option Data + ) + echo $p +} + +ipv4_router_alert_test() +{ + devlink_trap_stats_test "IPv4 Router Alert" "ipv4_router_alert" \ + $MZ $h1 -c 1 -a own -b $(mac_get $rp1) \ + -A 192.0.2.1 -B 198.51.100.3 \ + -t ip option=$(ipv4_router_alert_get) -p 100 -q +} + +ipv6_router_alert_get() +{ + local p + + # https://en.wikipedia.org/wiki/IPv6_packet#Hop-by-hop_options_and_destination_options + # https://tools.ietf.org/html/rfc2711#section-2.1 + p=$(: + )"11:"$( : Next Header - UDP + )"00:"$( : Hdr Ext Len + )"05:02:00:00:00:00:"$( : Option Data + ) + echo $p +} + +ipv6_router_alert_test() +{ + devlink_trap_stats_test "IPv6 Router Alert" "ipv6_router_alert" \ + $MZ $h1 -6 -c 1 -a own -b $(mac_get $rp1) \ + -A 2001:db8:1::1 -B 2001:db8:1::3 \ + -t ip next=0,payload=$(ipv6_router_alert_get) -p 100 -q +} + +ipv6_dip_all_nodes_test() +{ + devlink_trap_stats_test "IPv6 Destination IP \"All Nodes Address\"" \ + "ipv6_dip_all_nodes" \ + $MZ $h1 -6 -c 1 -a own -b 33:33:00:00:00:01 \ + -A 2001:db8:1::1 -B ff02::1 -t udp sp=12345,dp=54321 -p 100 -q +} + +ipv6_dip_all_routers_test() +{ + devlink_trap_stats_test "IPv6 Destination IP \"All Routers Address\"" \ + "ipv6_dip_all_routers" \ + $MZ $h1 -6 -c 1 -a own -b 33:33:00:00:00:02 \ + -A 2001:db8:1::1 -B ff02::2 -t udp sp=12345,dp=54321 -p 100 -q +} + +ipv6_router_solicit_test() +{ + devlink_trap_stats_test "IPv6 Router Solicitation" \ + "ipv6_router_solicit" \ + $MZ $h1 -6 -c 1 -a own -b 33:33:00:00:00:02 \ + -A fe80::1 -B ff02::2 \ + -t ip hop=1,next=58,payload=$(icmpv6_header_get 133) -p 100 -q +} + +ipv6_router_advert_test() +{ + devlink_trap_stats_test "IPv6 Router Advertisement" \ + "ipv6_router_advert" \ + $MZ $h1 -6 -c 1 -a own -b 33:33:00:00:00:01 \ + -A fe80::1 -B ff02::1 \ + -t ip hop=1,next=58,payload=$(icmpv6_header_get 134) -p 100 -q +} + +ipv6_redirect_test() +{ + devlink_trap_stats_test "IPv6 Redirect Message" \ + "ipv6_redirect" \ + $MZ $h1 -6 -c 1 -a own -b $(mac_get $rp1) \ + -A fe80::1 -B 2001:db8:1::2 \ + -t ip hop=1,next=58,payload=$(icmpv6_header_get 137) -p 100 -q +} + +ptp_event_test() +{ + mlxsw_only_on_spectrum 1 || return + + # PTP Sync (0) + devlink_trap_stats_test "PTP Time-Critical Event Message" "ptp_event" \ + $MZ $h1 -c 1 -a own -b 01:00:5e:00:01:81 \ + -A 192.0.2.1 -B 224.0.1.129 \ + -t udp sp=12345,dp=319,payload=10 -p 100 -q +} + +ptp_general_test() +{ + mlxsw_only_on_spectrum 1 || return + + # PTP Announce (b) + devlink_trap_stats_test "PTP General Message" "ptp_general" \ + $MZ $h1 -c 1 -a own -b 01:00:5e:00:01:81 \ + -A 192.0.2.1 -B 224.0.1.129 \ + -t udp sp=12345,dp=320,payload=1b -p 100 -q +} + +flow_action_sample_test() +{ + # Install a filter that samples every incoming packet. + tc qdisc add dev $rp1 clsact + tc filter add dev $rp1 ingress proto all pref 1 handle 101 matchall \ + skip_sw action sample rate 1 group 1 + + devlink_trap_stats_test "Flow Sampling" "flow_action_sample" \ + $MZ $h1 -c 1 -a own -b $(mac_get $rp1) \ + -A 192.0.2.1 -B 198.51.100.1 -t udp sp=12345,dp=54321 -p 100 -q + + tc filter del dev $rp1 ingress proto all pref 1 handle 101 matchall + tc qdisc del dev $rp1 clsact +} + +flow_action_trap_test() +{ + # Install a filter that traps a specific flow. + tc qdisc add dev $rp1 clsact + tc filter add dev $rp1 ingress proto ip pref 1 handle 101 flower \ + skip_sw ip_proto udp src_port 12345 dst_port 54321 action trap + + devlink_trap_stats_test "Flow Trapping (Logging)" "flow_action_trap" \ + $MZ $h1 -c 1 -a own -b $(mac_get $rp1) \ + -A 192.0.2.1 -B 198.51.100.1 -t udp sp=12345,dp=54321 -p 100 -q + + tc filter del dev $rp1 ingress proto ip pref 1 handle 101 flower + tc qdisc del dev $rp1 clsact +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_l2_drops.sh b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_l2_drops.sh new file mode 100755 index 000000000..a4c2812e9 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_l2_drops.sh @@ -0,0 +1,430 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test devlink-trap L2 drops functionality over mlxsw. Each registered L2 drop +# packet trap is tested to make sure it is triggered under the right +# conditions. + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + source_mac_is_multicast_test + vlan_tag_mismatch_test + ingress_vlan_filter_test + ingress_stp_filter_test + port_list_is_empty_test + port_loopback_filter_test +" +NUM_NETIFS=4 +source $lib_dir/tc_common.sh +source $lib_dir/lib.sh +source $lib_dir/devlink_lib.sh + +h1_create() +{ + simple_if_init $h1 +} + +h1_destroy() +{ + simple_if_fini $h1 +} + +h2_create() +{ + simple_if_init $h2 +} + +h2_destroy() +{ + simple_if_fini $h2 +} + +switch_create() +{ + ip link add dev br0 type bridge vlan_filtering 1 mcast_snooping 0 + + ip link set dev $swp1 master br0 + ip link set dev $swp2 master br0 + + ip link set dev br0 up + ip link set dev $swp1 up + ip link set dev $swp2 up + + tc qdisc add dev $swp2 clsact +} + +switch_destroy() +{ + tc qdisc del dev $swp2 clsact + + ip link set dev $swp2 down + ip link set dev $swp1 down + + ip link del dev br0 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + vrf_prepare + + h1_create + h2_create + + switch_create +} + +cleanup() +{ + pre_cleanup + + switch_destroy + + h2_destroy + h1_destroy + + vrf_cleanup +} + +source_mac_is_multicast_test() +{ + local trap_name="source_mac_is_multicast" + local smac=01:02:03:04:05:06 + local mz_pid + + tc filter add dev $swp2 egress protocol ip pref 1 handle 101 \ + flower src_mac $smac action drop + + $MZ $h1 -c 0 -p 100 -a $smac -b bcast -t ip -d 1msec -q & + mz_pid=$! + + RET=0 + + devlink_trap_drop_test $trap_name $swp2 101 + + log_test "Source MAC is multicast" + + devlink_trap_drop_cleanup $mz_pid $swp2 ip 1 101 +} + +__vlan_tag_mismatch_test() +{ + local trap_name="vlan_tag_mismatch" + local dmac=de:ad:be:ef:13:37 + local opt=$1; shift + local mz_pid + + # Remove PVID flag. This should prevent untagged and prio-tagged + # packets from entering the bridge. + bridge vlan add vid 1 dev $swp1 untagged master + + tc filter add dev $swp2 egress protocol ip pref 1 handle 101 \ + flower dst_mac $dmac action drop + + $MZ $h1 "$opt" -c 0 -p 100 -a own -b $dmac -t ip -d 1msec -q & + mz_pid=$! + + devlink_trap_drop_test $trap_name $swp2 101 + + # Add PVID and make sure packets are no longer dropped. + bridge vlan add vid 1 dev $swp1 pvid untagged master + devlink_trap_action_set $trap_name "trap" + + devlink_trap_stats_idle_test $trap_name + check_err $? "Trap stats not idle when packets should not be dropped" + devlink_trap_group_stats_idle_test $(devlink_trap_group_get $trap_name) + check_err $? "Trap group stats not idle with when packets should not be dropped" + + tc_check_packets "dev $swp2 egress" 101 0 + check_fail $? "Packets not forwarded when should" + + devlink_trap_action_set $trap_name "drop" + + devlink_trap_drop_cleanup $mz_pid $swp2 ip 1 101 +} + +vlan_tag_mismatch_untagged_test() +{ + RET=0 + + __vlan_tag_mismatch_test + + log_test "VLAN tag mismatch - untagged packets" +} + +vlan_tag_mismatch_vid_0_test() +{ + RET=0 + + __vlan_tag_mismatch_test "-Q 0" + + log_test "VLAN tag mismatch - prio-tagged packets" +} + +vlan_tag_mismatch_test() +{ + vlan_tag_mismatch_untagged_test + vlan_tag_mismatch_vid_0_test +} + +ingress_vlan_filter_test() +{ + local trap_name="ingress_vlan_filter" + local dmac=de:ad:be:ef:13:37 + local mz_pid + local vid=10 + + bridge vlan add vid $vid dev $swp2 master + + RET=0 + + tc filter add dev $swp2 egress protocol ip pref 1 handle 101 \ + flower dst_mac $dmac action drop + + $MZ $h1 -Q $vid -c 0 -p 100 -a own -b $dmac -t ip -d 1msec -q & + mz_pid=$! + + devlink_trap_drop_test $trap_name $swp2 101 + + # Add the VLAN on the bridge port and make sure packets are no longer + # dropped. + bridge vlan add vid $vid dev $swp1 master + devlink_trap_action_set $trap_name "trap" + + devlink_trap_stats_idle_test $trap_name + check_err $? "Trap stats not idle when packets should not be dropped" + devlink_trap_group_stats_idle_test $(devlink_trap_group_get $trap_name) + check_err $? "Trap group stats not idle with when packets should not be dropped" + + tc_check_packets "dev $swp2 egress" 101 0 + check_fail $? "Packets not forwarded when should" + + devlink_trap_action_set $trap_name "drop" + + log_test "Ingress VLAN filter" + + devlink_trap_drop_cleanup $mz_pid $swp2 ip 1 101 + + bridge vlan del vid $vid dev $swp1 master + bridge vlan del vid $vid dev $swp2 master +} + +__ingress_stp_filter_test() +{ + local trap_name="ingress_spanning_tree_filter" + local dmac=de:ad:be:ef:13:37 + local state=$1; shift + local mz_pid + local vid=20 + + bridge vlan add vid $vid dev $swp2 master + bridge vlan add vid $vid dev $swp1 master + ip link set dev $swp1 type bridge_slave state $state + + tc filter add dev $swp2 egress protocol ip pref 1 handle 101 \ + flower dst_mac $dmac action drop + + $MZ $h1 -Q $vid -c 0 -p 100 -a own -b $dmac -t ip -d 1msec -q & + mz_pid=$! + + devlink_trap_drop_test $trap_name $swp2 101 + + # Change STP state to forwarding and make sure packets are no longer + # dropped. + ip link set dev $swp1 type bridge_slave state 3 + devlink_trap_action_set $trap_name "trap" + + devlink_trap_stats_idle_test $trap_name + check_err $? "Trap stats not idle when packets should not be dropped" + devlink_trap_group_stats_idle_test $(devlink_trap_group_get $trap_name) + check_err $? "Trap group stats not idle with when packets should not be dropped" + + tc_check_packets "dev $swp2 egress" 101 0 + check_fail $? "Packets not forwarded when should" + + devlink_trap_action_set $trap_name "drop" + + devlink_trap_drop_cleanup $mz_pid $swp2 ip 1 101 + + bridge vlan del vid $vid dev $swp1 master + bridge vlan del vid $vid dev $swp2 master +} + +ingress_stp_filter_listening_test() +{ + local state=$1; shift + + RET=0 + + __ingress_stp_filter_test $state + + log_test "Ingress STP filter - listening state" +} + +ingress_stp_filter_learning_test() +{ + local state=$1; shift + + RET=0 + + __ingress_stp_filter_test $state + + log_test "Ingress STP filter - learning state" +} + +ingress_stp_filter_test() +{ + ingress_stp_filter_listening_test 1 + ingress_stp_filter_learning_test 2 +} + +port_list_is_empty_uc_test() +{ + local trap_name="port_list_is_empty" + local dmac=de:ad:be:ef:13:37 + local mz_pid + + # Disable unicast flooding on both ports, so that packets cannot egress + # any port. + ip link set dev $swp1 type bridge_slave flood off + ip link set dev $swp2 type bridge_slave flood off + + RET=0 + + tc filter add dev $swp2 egress protocol ip pref 1 handle 101 \ + flower dst_mac $dmac action drop + + $MZ $h1 -c 0 -p 100 -a own -b $dmac -t ip -d 1msec -q & + mz_pid=$! + + devlink_trap_drop_test $trap_name $swp2 101 + + # Allow packets to be flooded to one port. + ip link set dev $swp2 type bridge_slave flood on + devlink_trap_action_set $trap_name "trap" + + devlink_trap_stats_idle_test $trap_name + check_err $? "Trap stats not idle when packets should not be dropped" + devlink_trap_group_stats_idle_test $(devlink_trap_group_get $trap_name) + check_err $? "Trap group stats not idle with when packets should not be dropped" + + tc_check_packets "dev $swp2 egress" 101 0 + check_fail $? "Packets not forwarded when should" + + devlink_trap_action_set $trap_name "drop" + + log_test "Port list is empty - unicast" + + devlink_trap_drop_cleanup $mz_pid $swp2 ip 1 101 + + ip link set dev $swp1 type bridge_slave flood on +} + +port_list_is_empty_mc_test() +{ + local trap_name="port_list_is_empty" + local dmac=01:00:5e:00:00:01 + local dip=239.0.0.1 + local mz_pid + + # Disable multicast flooding on both ports, so that packets cannot + # egress any port. We also need to flush IP addresses from the bridge + # in order to prevent packets from being flooded to the router port. + ip link set dev $swp1 type bridge_slave mcast_flood off + ip link set dev $swp2 type bridge_slave mcast_flood off + ip address flush dev br0 + + RET=0 + + tc filter add dev $swp2 egress protocol ip pref 1 handle 101 \ + flower dst_mac $dmac action drop + + $MZ $h1 -c 0 -p 100 -a own -b $dmac -t ip -B $dip -d 1msec -q & + mz_pid=$! + + devlink_trap_drop_test $trap_name $swp2 101 + + # Allow packets to be flooded to one port. + ip link set dev $swp2 type bridge_slave mcast_flood on + devlink_trap_action_set $trap_name "trap" + + devlink_trap_stats_idle_test $trap_name + check_err $? "Trap stats not idle when packets should not be dropped" + devlink_trap_group_stats_idle_test $(devlink_trap_group_get $trap_name) + check_err $? "Trap group stats not idle with when packets should not be dropped" + + tc_check_packets "dev $swp2 egress" 101 0 + check_fail $? "Packets not forwarded when should" + + devlink_trap_action_set $trap_name "drop" + + log_test "Port list is empty - multicast" + + devlink_trap_drop_cleanup $mz_pid $swp2 ip 1 101 + + ip link set dev $swp1 type bridge_slave mcast_flood on +} + +port_list_is_empty_test() +{ + port_list_is_empty_uc_test + port_list_is_empty_mc_test +} + +port_loopback_filter_uc_test() +{ + local trap_name="port_loopback_filter" + local dmac=de:ad:be:ef:13:37 + local mz_pid + + # Make sure packets can only egress the input port. + ip link set dev $swp2 type bridge_slave flood off + + RET=0 + + tc filter add dev $swp2 egress protocol ip pref 1 handle 101 \ + flower dst_mac $dmac action drop + + $MZ $h1 -c 0 -p 100 -a own -b $dmac -t ip -d 1msec -q & + mz_pid=$! + + devlink_trap_drop_test $trap_name $swp2 101 + + # Allow packets to be flooded. + ip link set dev $swp2 type bridge_slave flood on + devlink_trap_action_set $trap_name "trap" + + devlink_trap_stats_idle_test $trap_name + check_err $? "Trap stats not idle when packets should not be dropped" + devlink_trap_group_stats_idle_test $(devlink_trap_group_get $trap_name) + check_err $? "Trap group stats not idle with when packets should not be dropped" + + tc_check_packets "dev $swp2 egress" 101 0 + check_fail $? "Packets not forwarded when should" + + devlink_trap_action_set $trap_name "drop" + + log_test "Port loopback filter - unicast" + + devlink_trap_drop_cleanup $mz_pid $swp2 ip 1 101 +} + +port_loopback_filter_test() +{ + port_loopback_filter_uc_test +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_l3_drops.sh b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_l3_drops.sh new file mode 100755 index 000000000..160891dcb --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_l3_drops.sh @@ -0,0 +1,696 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test devlink-trap L3 drops functionality over mlxsw. Each registered L3 drop +# packet trap is tested to make sure it is triggered under the right +# conditions. + +# +---------------------------------+ +# | H1 (vrf) | +# | + $h1 | +# | | 192.0.2.1/24 | +# | | 2001:db8:1::1/64 | +# | | | +# | | default via 192.0.2.2 | +# | | default via 2001:db8:1::2 | +# +----|----------------------------+ +# | +# +----|----------------------------------------------------------------------+ +# | SW | | +# | + $rp1 | +# | 192.0.2.2/24 | +# | 2001:db8:1::2/64 | +# | | +# | 2001:db8:2::2/64 | +# | 198.51.100.2/24 | +# | + $rp2 | +# | | | +# +----|----------------------------------------------------------------------+ +# | +# +----|----------------------------+ +# | | default via 198.51.100.2 | +# | | default via 2001:db8:2::2 | +# | | | +# | | 2001:db8:2::1/64 | +# | | 198.51.100.1/24 | +# | + $h2 | +# | H2 (vrf) | +# +---------------------------------+ + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + non_ip_test + uc_dip_over_mc_dmac_test + dip_is_loopback_test + sip_is_mc_test + sip_is_loopback_test + ip_header_corrupted_test + ipv4_sip_is_limited_bc_test + ipv6_mc_dip_reserved_scope_test + ipv6_mc_dip_interface_local_scope_test + blackhole_route_test + irif_disabled_test + erif_disabled_test + blackhole_nexthop_test +" + +NUM_NETIFS=4 +source $lib_dir/lib.sh +source $lib_dir/tc_common.sh +source $lib_dir/devlink_lib.sh + +h1_create() +{ + simple_if_init $h1 192.0.2.1/24 2001:db8:1::1/64 + + ip -4 route add default vrf v$h1 nexthop via 192.0.2.2 + ip -6 route add default vrf v$h1 nexthop via 2001:db8:1::2 +} + +h1_destroy() +{ + ip -6 route del default vrf v$h1 nexthop via 2001:db8:1::2 + ip -4 route del default vrf v$h1 nexthop via 192.0.2.2 + + simple_if_fini $h1 192.0.2.1/24 2001:db8:1::1/64 +} + +h2_create() +{ + simple_if_init $h2 $h2_ipv4/24 $h2_ipv6/64 + + ip -4 route add default vrf v$h2 nexthop via 198.51.100.2 + ip -6 route add default vrf v$h2 nexthop via 2001:db8:2::2 +} + +h2_destroy() +{ + ip -6 route del default vrf v$h2 nexthop via 2001:db8:2::2 + ip -4 route del default vrf v$h2 nexthop via 198.51.100.2 + + simple_if_fini $h2 $h2_ipv4/24 $h2_ipv6/64 +} + +router_create() +{ + ip link set dev $rp1 up + ip link set dev $rp2 up + + tc qdisc add dev $rp2 clsact + + __addr_add_del $rp1 add 192.0.2.2/24 2001:db8:1::2/64 + __addr_add_del $rp2 add 198.51.100.2/24 2001:db8:2::2/64 +} + +router_destroy() +{ + __addr_add_del $rp2 del 198.51.100.2/24 2001:db8:2::2/64 + __addr_add_del $rp1 del 192.0.2.2/24 2001:db8:1::2/64 + + tc qdisc del dev $rp2 clsact + + ip link set dev $rp2 down + ip link set dev $rp1 down +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + rp1=${NETIFS[p2]} + + rp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + h1mac=$(mac_get $h1) + rp1mac=$(mac_get $rp1) + + h1_ipv4=192.0.2.1 + h2_ipv4=198.51.100.1 + h1_ipv6=2001:db8:1::1 + h2_ipv6=2001:db8:2::1 + + vrf_prepare + forwarding_enable + + h1_create + h2_create + + router_create +} + +cleanup() +{ + pre_cleanup + + router_destroy + + h2_destroy + h1_destroy + + forwarding_restore + vrf_cleanup +} + +ping_check() +{ + trap_name=$1; shift + + devlink_trap_action_set $trap_name "trap" + ping_do $h1 $h2_ipv4 + check_err $? "Packets that should not be trapped were trapped" + devlink_trap_action_set $trap_name "drop" +} + +non_ip_test() +{ + local trap_name="non_ip" + local mz_pid + + RET=0 + + ping_check $trap_name + + tc filter add dev $rp2 egress protocol ip pref 1 handle 101 \ + flower dst_ip $h2_ipv4 action drop + + # Generate non-IP packets to the router + $MZ $h1 -c 0 -p 100 -d 1msec -B $h2_ipv4 -q "$rp1mac $h1mac \ + 00:00 de:ad:be:ef" & + mz_pid=$! + + devlink_trap_drop_test $trap_name $rp2 101 + + log_test "Non IP" + + devlink_trap_drop_cleanup $mz_pid $rp2 "ip" 1 101 +} + +__uc_dip_over_mc_dmac_test() +{ + local desc=$1; shift + local proto=$1; shift + local dip=$1; shift + local flags=${1:-""}; shift + local trap_name="uc_dip_over_mc_dmac" + local dmac=01:02:03:04:05:06 + local mz_pid + + RET=0 + + ping_check $trap_name + + tc filter add dev $rp2 egress protocol $proto pref 1 handle 101 \ + flower ip_proto udp src_port 54321 dst_port 12345 action drop + + # Generate IP packets with a unicast IP and a multicast destination MAC + $MZ $h1 $flags -t udp "sp=54321,dp=12345" -c 0 -p 100 -b $dmac \ + -B $dip -d 1msec -q & + mz_pid=$! + + devlink_trap_drop_test $trap_name $rp2 101 + + log_test "Unicast destination IP over multicast destination MAC: $desc" + + devlink_trap_drop_cleanup $mz_pid $rp2 $proto 1 101 +} + +uc_dip_over_mc_dmac_test() +{ + __uc_dip_over_mc_dmac_test "IPv4" "ip" $h2_ipv4 + __uc_dip_over_mc_dmac_test "IPv6" "ipv6" $h2_ipv6 "-6" +} + +__sip_is_loopback_test() +{ + local desc=$1; shift + local proto=$1; shift + local sip=$1; shift + local dip=$1; shift + local flags=${1:-""}; shift + local trap_name="sip_is_loopback_address" + local mz_pid + + RET=0 + + ping_check $trap_name + + tc filter add dev $rp2 egress protocol $proto pref 1 handle 101 \ + flower src_ip $sip action drop + + # Generate packets with loopback source IP + $MZ $h1 $flags -t udp "sp=54321,dp=12345" -c 0 -p 100 -A $sip \ + -b $rp1mac -B $dip -d 1msec -q & + mz_pid=$! + + devlink_trap_drop_test $trap_name $rp2 101 + + log_test "Source IP is loopback address: $desc" + + devlink_trap_drop_cleanup $mz_pid $rp2 $proto 1 101 +} + +sip_is_loopback_test() +{ + __sip_is_loopback_test "IPv4" "ip" "127.0.0.0/8" $h2_ipv4 + __sip_is_loopback_test "IPv6" "ipv6" "::1" $h2_ipv6 "-6" +} + +__dip_is_loopback_test() +{ + local desc=$1; shift + local proto=$1; shift + local dip=$1; shift + local flags=${1:-""}; shift + local trap_name="dip_is_loopback_address" + local mz_pid + + RET=0 + + ping_check $trap_name + + tc filter add dev $rp2 egress protocol $proto pref 1 handle 101 \ + flower dst_ip $dip action drop + + # Generate packets with loopback destination IP + $MZ $h1 $flags -t udp "sp=54321,dp=12345" -c 0 -p 100 -b $rp1mac \ + -B $dip -d 1msec -q & + mz_pid=$! + + devlink_trap_drop_test $trap_name $rp2 101 + + log_test "Destination IP is loopback address: $desc" + + devlink_trap_drop_cleanup $mz_pid $rp2 $proto 1 101 +} + +dip_is_loopback_test() +{ + __dip_is_loopback_test "IPv4" "ip" "127.0.0.0/8" + __dip_is_loopback_test "IPv6" "ipv6" "::1" "-6" +} + +__sip_is_mc_test() +{ + local desc=$1; shift + local proto=$1; shift + local sip=$1; shift + local dip=$1; shift + local flags=${1:-""}; shift + local trap_name="sip_is_mc" + local mz_pid + + RET=0 + + ping_check $trap_name + + tc filter add dev $rp2 egress protocol $proto pref 1 handle 101 \ + flower src_ip $sip action drop + + # Generate packets with multicast source IP + $MZ $h1 $flags -t udp "sp=54321,dp=12345" -c 0 -p 100 -A $sip \ + -b $rp1mac -B $dip -d 1msec -q & + mz_pid=$! + + devlink_trap_drop_test $trap_name $rp2 101 + + log_test "Source IP is multicast: $desc" + + devlink_trap_drop_cleanup $mz_pid $rp2 $proto 1 101 +} + +sip_is_mc_test() +{ + __sip_is_mc_test "IPv4" "ip" "239.1.1.1" $h2_ipv4 + __sip_is_mc_test "IPv6" "ipv6" "FF02::2" $h2_ipv6 "-6" +} + +ipv4_sip_is_limited_bc_test() +{ + local trap_name="ipv4_sip_is_limited_bc" + local sip=255.255.255.255 + local mz_pid + + RET=0 + + ping_check $trap_name + + tc filter add dev $rp2 egress protocol ip pref 1 handle 101 \ + flower src_ip $sip action drop + + # Generate packets with limited broadcast source IP + $MZ $h1 -t udp "sp=54321,dp=12345" -c 0 -p 100 -A $sip -b $rp1mac \ + -B $h2_ipv4 -d 1msec -q & + mz_pid=$! + + devlink_trap_drop_test $trap_name $rp2 101 + + log_test "IPv4 source IP is limited broadcast" + + devlink_trap_drop_cleanup $mz_pid $rp2 "ip" 1 101 +} + +ipv4_payload_get() +{ + local ipver=$1; shift + local ihl=$1; shift + local checksum=$1; shift + + p=$(: + )"08:00:"$( : ETH type + )"$ipver"$( : IP version + )"$ihl:"$( : IHL + )"00:"$( : IP TOS + )"00:F4:"$( : IP total length + )"00:00:"$( : IP identification + )"20:00:"$( : IP flags + frag off + )"30:"$( : IP TTL + )"01:"$( : IP proto + )"$checksum:"$( : IP header csum + )"$h1_ipv4:"$( : IP saddr + )"$h2_ipv4:"$( : IP daddr + ) + echo $p +} + +__ipv4_header_corrupted_test() +{ + local desc=$1; shift + local ipver=$1; shift + local ihl=$1; shift + local checksum=$1; shift + local trap_name="ip_header_corrupted" + local payload + local mz_pid + + RET=0 + + ping_check $trap_name + + tc filter add dev $rp2 egress protocol ip pref 1 handle 101 \ + flower dst_ip $h2_ipv4 action drop + + payload=$(ipv4_payload_get $ipver $ihl $checksum) + + # Generate packets with corrupted IP header + $MZ $h1 -c 0 -d 1msec -a $h1mac -b $rp1mac -q p=$payload & + mz_pid=$! + + devlink_trap_drop_test $trap_name $rp2 101 + + log_test "IP header corrupted: $desc: IPv4" + + devlink_trap_drop_cleanup $mz_pid $rp2 "ip" 1 101 +} + +ipv6_payload_get() +{ + local ipver=$1; shift + + p=$(: + )"86:DD:"$( : ETH type + )"$ipver"$( : IP version + )"0:0:"$( : Traffic class + )"0:00:00:"$( : Flow label + )"00:00:"$( : Payload length + )"01:"$( : Next header + )"04:"$( : Hop limit + )"$h1_ipv6:"$( : IP saddr + )"$h2_ipv6:"$( : IP daddr + ) + echo $p +} + +__ipv6_header_corrupted_test() +{ + local desc=$1; shift + local ipver=$1; shift + local trap_name="ip_header_corrupted" + local payload + local mz_pid + + RET=0 + + ping_check $trap_name + + tc filter add dev $rp2 egress protocol ip pref 1 handle 101 \ + flower dst_ip $h2_ipv4 action drop + + payload=$(ipv6_payload_get $ipver) + + # Generate packets with corrupted IP header + $MZ $h1 -c 0 -d 1msec -a $h1mac -b $rp1mac -q p=$payload & + mz_pid=$! + + devlink_trap_drop_test $trap_name $rp2 101 + + log_test "IP header corrupted: $desc: IPv6" + + devlink_trap_drop_cleanup $mz_pid $rp2 "ip" 1 101 +} + +ip_header_corrupted_test() +{ + # Each test uses one wrong value. The three values below are correct. + local ipv="4" + local ihl="5" + local checksum="00:F4" + + __ipv4_header_corrupted_test "wrong IP version" 5 $ihl $checksum + __ipv4_header_corrupted_test "wrong IHL" $ipv 4 $checksum + __ipv4_header_corrupted_test "wrong checksum" $ipv $ihl "00:00" + __ipv6_header_corrupted_test "wrong IP version" 5 +} + +ipv6_mc_dip_reserved_scope_test() +{ + local trap_name="ipv6_mc_dip_reserved_scope" + local dip=FF00:: + local mz_pid + + RET=0 + + ping_check $trap_name + + tc filter add dev $rp2 egress protocol ipv6 pref 1 handle 101 \ + flower dst_ip $dip action drop + + # Generate packets with reserved scope destination IP + $MZ $h1 -6 -t udp "sp=54321,dp=12345" -c 0 -p 100 -b \ + "33:33:00:00:00:00" -B $dip -d 1msec -q & + mz_pid=$! + + devlink_trap_drop_test $trap_name $rp2 101 + + log_test "IPv6 multicast destination IP reserved scope" + + devlink_trap_drop_cleanup $mz_pid $rp2 "ipv6" 1 101 +} + +ipv6_mc_dip_interface_local_scope_test() +{ + local trap_name="ipv6_mc_dip_interface_local_scope" + local dip=FF01:: + local mz_pid + + RET=0 + + ping_check $trap_name + + tc filter add dev $rp2 egress protocol ipv6 pref 1 handle 101 \ + flower dst_ip $dip action drop + + # Generate packets with interface local scope destination IP + $MZ $h1 -6 -t udp "sp=54321,dp=12345" -c 0 -p 100 -b \ + "33:33:00:00:00:00" -B $dip -d 1msec -q & + mz_pid=$! + + devlink_trap_drop_test $trap_name $rp2 101 + + log_test "IPv6 multicast destination IP interface-local scope" + + devlink_trap_drop_cleanup $mz_pid $rp2 "ipv6" 1 101 +} + +__blackhole_route_test() +{ + local flags=$1; shift + local subnet=$1; shift + local proto=$1; shift + local dip=$1; shift + local ip_proto=${1:-"icmp"}; shift + local trap_name="blackhole_route" + local mz_pid + + RET=0 + + ping_check $trap_name + + ip -$flags route add blackhole $subnet + tc filter add dev $rp2 egress protocol $proto pref 1 handle 101 \ + flower skip_hw dst_ip $dip ip_proto $ip_proto action drop + + # Generate packets to the blackhole route + $MZ $h1 -$flags -t udp "sp=54321,dp=12345" -c 0 -p 100 -b $rp1mac \ + -B $dip -d 1msec -q & + mz_pid=$! + + devlink_trap_drop_test $trap_name $rp2 101 + log_test "Blackhole route: IPv$flags" + + devlink_trap_drop_cleanup $mz_pid $rp2 $proto 1 101 + ip -$flags route del blackhole $subnet +} + +blackhole_route_test() +{ + __blackhole_route_test "4" "198.51.100.0/30" "ip" $h2_ipv4 + __blackhole_route_test "6" "2001:db8:2::/120" "ipv6" $h2_ipv6 "icmpv6" +} + +irif_disabled_test() +{ + local trap_name="irif_disabled" + local t0_packets t0_bytes + local t1_packets t1_bytes + local mz_pid + + RET=0 + + ping_check $trap_name + + devlink_trap_action_set $trap_name "trap" + + # When RIF of a physical port ("Sub-port RIF") is destroyed, we first + # block the STP of the {Port, VLAN} so packets cannot get into the RIF. + # Using bridge enables us to see this trap because when bridge is + # destroyed, there is a small time window that packets can go into the + # RIF, while it is disabled. + ip link add dev br0 type bridge + ip link set dev $rp1 master br0 + ip address flush dev $rp1 + __addr_add_del br0 add 192.0.2.2/24 + ip li set dev br0 up + + t0_packets=$(devlink_trap_rx_packets_get $trap_name) + t0_bytes=$(devlink_trap_rx_bytes_get $trap_name) + + # Generate packets to h2 through br0 RIF that will be removed later + $MZ $h1 -t udp "sp=54321,dp=12345" -c 0 -p 100 -a own -b $rp1mac \ + -B $h2_ipv4 -q & + mz_pid=$! + + # Wait before removing br0 RIF to allow packets to go into the bridge. + sleep 1 + + # Flushing address will dismantle the RIF + ip address flush dev br0 + + t1_packets=$(devlink_trap_rx_packets_get $trap_name) + t1_bytes=$(devlink_trap_rx_bytes_get $trap_name) + + if [[ $t0_packets -eq $t1_packets && $t0_bytes -eq $t1_bytes ]]; then + check_err 1 "Trap stats idle when packets should be trapped" + fi + + log_test "Ingress RIF disabled" + + kill $mz_pid && wait $mz_pid &> /dev/null + ip link set dev $rp1 nomaster + __addr_add_del $rp1 add 192.0.2.2/24 2001:db8:1::2/64 + ip link del dev br0 type bridge + devlink_trap_action_set $trap_name "drop" +} + +erif_disabled_test() +{ + local trap_name="erif_disabled" + local t0_packets t0_bytes + local t1_packets t1_bytes + local mz_pid + + RET=0 + + ping_check $trap_name + + devlink_trap_action_set $trap_name "trap" + ip link add dev br0 type bridge + ip add flush dev $rp1 + ip link set dev $rp1 master br0 + __addr_add_del br0 add 192.0.2.2/24 + ip link set dev br0 up + + t0_packets=$(devlink_trap_rx_packets_get $trap_name) + t0_bytes=$(devlink_trap_rx_bytes_get $trap_name) + + rp2mac=$(mac_get $rp2) + + # Generate packets that should go out through br0 RIF that will be + # removed later + $MZ $h2 -t udp "sp=54321,dp=12345" -c 0 -p 100 -a own -b $rp2mac \ + -B 192.0.2.1 -q & + mz_pid=$! + + sleep 5 + # Unlinking the port from the bridge will disable the RIF associated + # with br0 as it is no longer an upper of any mlxsw port. + ip link set dev $rp1 nomaster + + t1_packets=$(devlink_trap_rx_packets_get $trap_name) + t1_bytes=$(devlink_trap_rx_bytes_get $trap_name) + + if [[ $t0_packets -eq $t1_packets && $t0_bytes -eq $t1_bytes ]]; then + check_err 1 "Trap stats idle when packets should be trapped" + fi + + log_test "Egress RIF disabled" + + kill $mz_pid && wait $mz_pid &> /dev/null + __addr_add_del $rp1 add 192.0.2.2/24 2001:db8:1::2/64 + ip link del dev br0 type bridge + devlink_trap_action_set $trap_name "drop" +} + +__blackhole_nexthop_test() +{ + local flags=$1; shift + local subnet=$1; shift + local proto=$1; shift + local dip=$1; shift + local trap_name="blackhole_nexthop" + local mz_pid + + RET=0 + + ip -$flags nexthop add id 1 blackhole + ip -$flags route add $subnet nhid 1 + tc filter add dev $rp2 egress protocol $proto pref 1 handle 101 \ + flower skip_hw dst_ip $dip ip_proto udp action drop + + # Generate packets to the blackhole nexthop + $MZ $h1 -$flags -t udp "sp=54321,dp=12345" -c 0 -p 100 -b $rp1mac \ + -B $dip -d 1msec -q & + mz_pid=$! + + devlink_trap_drop_test $trap_name $rp2 101 + log_test "Blackhole nexthop: IPv$flags" + + devlink_trap_drop_cleanup $mz_pid $rp2 $proto 1 101 + ip -$flags route del $subnet + ip -$flags nexthop del id 1 +} + +blackhole_nexthop_test() +{ + __blackhole_nexthop_test "4" "198.51.100.0/30" "ip" $h2_ipv4 + __blackhole_nexthop_test "6" "2001:db8:2::/120" "ipv6" $h2_ipv6 +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_l3_exceptions.sh b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_l3_exceptions.sh new file mode 100755 index 000000000..190c1b6b5 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_l3_exceptions.sh @@ -0,0 +1,583 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test devlink-trap L3 exceptions functionality over mlxsw. +# Check all exception traps to make sure they are triggered under the right +# conditions. + +# +---------------------------------+ +# | H1 (vrf) | +# | + $h1 | +# | | 192.0.2.1/24 | +# | | 2001:db8:1::1/64 | +# | | | +# | | default via 192.0.2.2 | +# | | default via 2001:db8:1::2 | +# +----|----------------------------+ +# | +# +----|----------------------------------------------------------------------+ +# | SW | | +# | + $rp1 | +# | 192.0.2.2/24 | +# | 2001:db8:1::2/64 | +# | | +# | 2001:db8:2::2/64 | +# | 198.51.100.2/24 | +# | + $rp2 | +# | | | +# +----|----------------------------------------------------------------------+ +# | +# +----|----------------------------+ +# | | default via 198.51.100.2 | +# | | default via 2001:db8:2::2 | +# | | | +# | | 2001:db8:2::1/64 | +# | | 198.51.100.1/24 | +# | + $h2 | +# | H2 (vrf) | +# +---------------------------------+ + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + mtu_value_is_too_small_test + ttl_value_is_too_small_test + mc_reverse_path_forwarding_test + reject_route_test + unresolved_neigh_test + ipv4_lpm_miss_test + ipv6_lpm_miss_test +" + +NUM_NETIFS=4 +source $lib_dir/lib.sh +source $lib_dir/tc_common.sh +source $lib_dir/devlink_lib.sh + +require_command $MCD +require_command $MC_CLI +table_name=selftests + +h1_create() +{ + simple_if_init $h1 192.0.2.1/24 2001:db8:1::1/64 + + ip -4 route add default vrf v$h1 nexthop via 192.0.2.2 + ip -6 route add default vrf v$h1 nexthop via 2001:db8:1::2 + + tc qdisc add dev $h1 clsact +} + +h1_destroy() +{ + tc qdisc del dev $h1 clsact + + ip -6 route del default vrf v$h1 nexthop via 2001:db8:1::2 + ip -4 route del default vrf v$h1 nexthop via 192.0.2.2 + + simple_if_fini $h1 192.0.2.1/24 2001:db8:1::1/64 +} + +h2_create() +{ + simple_if_init $h2 198.51.100.1/24 2001:db8:2::1/64 + + ip -4 route add default vrf v$h2 nexthop via 198.51.100.2 + ip -6 route add default vrf v$h2 nexthop via 2001:db8:2::2 +} + +h2_destroy() +{ + ip -6 route del default vrf v$h2 nexthop via 2001:db8:2::2 + ip -4 route del default vrf v$h2 nexthop via 198.51.100.2 + + simple_if_fini $h2 198.51.100.1/24 2001:db8:2::1/64 +} + +router_create() +{ + ip link set dev $rp1 up + ip link set dev $rp2 up + + tc qdisc add dev $rp2 clsact + + __addr_add_del $rp1 add 192.0.2.2/24 2001:db8:1::2/64 + __addr_add_del $rp2 add 198.51.100.2/24 2001:db8:2::2/64 +} + +router_destroy() +{ + __addr_add_del $rp2 del 198.51.100.2/24 2001:db8:2::2/64 + __addr_add_del $rp1 del 192.0.2.2/24 2001:db8:1::2/64 + + tc qdisc del dev $rp2 clsact + + ip link set dev $rp2 down + ip link set dev $rp1 down +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + rp1=${NETIFS[p2]} + + rp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + rp1mac=$(mac_get $rp1) + + start_mcd + + vrf_prepare + forwarding_enable + + h1_create + h2_create + + router_create +} + +cleanup() +{ + pre_cleanup + + router_destroy + + h2_destroy + h1_destroy + + forwarding_restore + vrf_cleanup + + kill_mcd +} + +ping_check() +{ + ping_do $h1 198.51.100.1 + check_err $? "Packets that should not be trapped were trapped" +} + +trap_action_check() +{ + local trap_name=$1; shift + local expected_action=$1; shift + + action=$(devlink_trap_action_get $trap_name) + if [ "$action" != $expected_action ]; then + check_err 1 "Trap $trap_name has wrong action: $action" + fi +} + +mtu_value_is_too_small_test() +{ + local trap_name="mtu_value_is_too_small" + local expected_action="trap" + local mz_pid + + RET=0 + + ping_check $trap_name + trap_action_check $trap_name $expected_action + + # type - Destination Unreachable + # code - Fragmentation Needed and Don't Fragment was Set + tc filter add dev $h1 ingress protocol ip pref 1 handle 101 \ + flower skip_hw ip_proto icmp type 3 code 4 action pass + + mtu_set $rp2 1300 + + # Generate IP packets bigger than router's MTU with don't fragment + # flag on. + $MZ $h1 -t udp "sp=54321,dp=12345,df" -p 1400 -c 0 -d 1msec -b $rp1mac \ + -B 198.51.100.1 -q & + mz_pid=$! + + devlink_trap_exception_test $trap_name + + tc_check_packets_hitting "dev $h1 ingress" 101 + check_err $? "Packets were not received to h1" + + log_test "MTU value is too small" + + mtu_restore $rp2 + + kill $mz_pid && wait $mz_pid &> /dev/null + tc filter del dev $h1 ingress protocol ip pref 1 handle 101 flower +} + +__ttl_value_is_too_small_test() +{ + local ttl_val=$1; shift + local trap_name="ttl_value_is_too_small" + local expected_action="trap" + local mz_pid + + RET=0 + + ping_check $trap_name + trap_action_check $trap_name $expected_action + + # type - Time Exceeded + # code - Time to Live exceeded in Transit + tc filter add dev $h1 ingress protocol ip pref 1 handle 101 \ + flower skip_hw ip_proto icmp type 11 code 0 action pass + + # Generate IP packets with small TTL + $MZ $h1 -t udp "ttl=$ttl_val,sp=54321,dp=12345" -c 0 -d 1msec \ + -b $rp1mac -B 198.51.100.1 -q & + mz_pid=$! + + devlink_trap_exception_test $trap_name + + tc_check_packets_hitting "dev $h1 ingress" 101 + check_err $? "Packets were not received to h1" + + log_test "TTL value is too small: TTL=$ttl_val" + + kill $mz_pid && wait $mz_pid &> /dev/null + tc filter del dev $h1 ingress protocol ip pref 1 handle 101 flower +} + +ttl_value_is_too_small_test() +{ + __ttl_value_is_too_small_test 0 + __ttl_value_is_too_small_test 1 +} + +start_mcd() +{ + SMCROUTEDIR="$(mktemp -d)" + for ((i = 1; i <= $NUM_NETIFS; ++i)); do + echo "phyint ${NETIFS[p$i]} enable" >> \ + $SMCROUTEDIR/$table_name.conf + done + + $MCD -N -I $table_name -f $SMCROUTEDIR/$table_name.conf \ + -P $SMCROUTEDIR/$table_name.pid +} + +kill_mcd() +{ + pkill $MCD + rm -rf $SMCROUTEDIR +} + +__mc_reverse_path_forwarding_test() +{ + local desc=$1; shift + local src_ip=$1; shift + local dst_ip=$1; shift + local dst_mac=$1; shift + local proto=$1; shift + local flags=${1:-""}; shift + local trap_name="mc_reverse_path_forwarding" + local expected_action="trap" + local mz_pid + + RET=0 + + ping_check $trap_name + trap_action_check $trap_name $expected_action + + tc filter add dev $rp2 egress protocol $proto pref 1 handle 101 \ + flower dst_ip $dst_ip ip_proto udp action drop + + $MC_CLI -I $table_name add $rp1 $src_ip $dst_ip $rp2 + + # Generate packets to multicast address. + $MZ $h2 $flags -t udp "sp=54321,dp=12345" -c 0 -p 128 \ + -a 00:11:22:33:44:55 -b $dst_mac \ + -A $src_ip -B $dst_ip -q & + + mz_pid=$! + + devlink_trap_exception_test $trap_name + + tc_check_packets "dev $rp2 egress" 101 0 + check_err $? "Packets were not dropped" + + log_test "Multicast reverse path forwarding: $desc" + + kill $mz_pid && wait $mz_pid &> /dev/null + tc filter del dev $rp2 egress protocol $proto pref 1 handle 101 flower +} + +mc_reverse_path_forwarding_test() +{ + __mc_reverse_path_forwarding_test "IPv4" "192.0.2.1" "225.1.2.3" \ + "01:00:5e:01:02:03" "ip" + __mc_reverse_path_forwarding_test "IPv6" "2001:db8:1::1" "ff0e::3" \ + "33:33:00:00:00:03" "ipv6" "-6" +} + +__reject_route_test() +{ + local desc=$1; shift + local dst_ip=$1; shift + local proto=$1; shift + local ip_proto=$1; shift + local type=$1; shift + local code=$1; shift + local unreachable=$1; shift + local flags=${1:-""}; shift + local trap_name="reject_route" + local expected_action="trap" + local mz_pid + + RET=0 + + ping_check $trap_name + trap_action_check $trap_name $expected_action + + tc filter add dev $h1 ingress protocol $proto pref 1 handle 101 flower \ + skip_hw ip_proto $ip_proto type $type code $code action pass + + ip route add unreachable $unreachable + + # Generate pacekts to h2. The destination IP is unreachable. + $MZ $flags $h1 -t udp "sp=54321,dp=12345" -c 0 -d 1msec -b $rp1mac \ + -B $dst_ip -q & + mz_pid=$! + + devlink_trap_exception_test $trap_name + + tc_check_packets_hitting "dev $h1 ingress" 101 + check_err $? "ICMP packet was not received to h1" + + log_test "Reject route: $desc" + + kill $mz_pid && wait $mz_pid &> /dev/null + ip route del unreachable $unreachable + tc filter del dev $h1 ingress protocol $proto pref 1 handle 101 flower +} + +reject_route_test() +{ + # type - Destination Unreachable + # code - Host Unreachable + __reject_route_test "IPv4" 198.51.100.1 "ip" "icmp" 3 1 \ + "198.51.100.0/26" + # type - Destination Unreachable + # code - No Route + __reject_route_test "IPv6" 2001:db8:2::1 "ipv6" "icmpv6" 1 0 \ + "2001:db8:2::0/66" "-6" +} + +__host_miss_test() +{ + local desc=$1; shift + local dip=$1; shift + local trap_name="unresolved_neigh" + local expected_action="trap" + local mz_pid + + RET=0 + + ping_check $trap_name + trap_action_check $trap_name $expected_action + + ip neigh flush dev $rp2 + + t0_packets=$(devlink_trap_rx_packets_get $trap_name) + + # Generate packets to h2 (will incur a unresolved neighbor). + # The ping should pass and devlink counters should be increased. + ping_do $h1 $dip + check_err $? "ping failed: $desc" + + t1_packets=$(devlink_trap_rx_packets_get $trap_name) + + if [[ $t0_packets -eq $t1_packets ]]; then + check_err 1 "Trap counter did not increase" + fi + + log_test "Unresolved neigh: host miss: $desc" +} + +__invalid_nexthop_test() +{ + local desc=$1; shift + local dip=$1; shift + local extra_add=$1; shift + local subnet=$1; shift + local via_add=$1; shift + local trap_name="unresolved_neigh" + local expected_action="trap" + local mz_pid + + RET=0 + + ping_check $trap_name + trap_action_check $trap_name $expected_action + + ip address add $extra_add/$subnet dev $h2 + + # Check that correct route does not trigger unresolved_neigh + ip $flags route add $dip via $extra_add dev $rp2 + + # Generate packets in order to discover all neighbours. + # Without it, counters of unresolved_neigh will be increased + # during neighbours discovery and the check below will fail + # for a wrong reason + ping_do $h1 $dip + + t0_packets=$(devlink_trap_rx_packets_get $trap_name) + ping_do $h1 $dip + t1_packets=$(devlink_trap_rx_packets_get $trap_name) + + if [[ $t0_packets -ne $t1_packets ]]; then + check_err 1 "Trap counter increased when it should not" + fi + + ip $flags route del $dip via $extra_add dev $rp2 + + # Check that route to nexthop that does not exist trigger + # unresolved_neigh + ip $flags route add $dip via $via_add dev $h2 + + t0_packets=$(devlink_trap_rx_packets_get $trap_name) + ping_do $h1 $dip + t1_packets=$(devlink_trap_rx_packets_get $trap_name) + + if [[ $t0_packets -eq $t1_packets ]]; then + check_err 1 "Trap counter did not increase" + fi + + ip $flags route del $dip via $via_add dev $h2 + ip address del $extra_add/$subnet dev $h2 + log_test "Unresolved neigh: nexthop does not exist: $desc" +} + +__invalid_nexthop_bucket_test() +{ + local desc=$1; shift + local dip=$1; shift + local via_add=$1; shift + local trap_name="unresolved_neigh" + + RET=0 + + # Check that route to nexthop that does not exist triggers + # unresolved_neigh + ip nexthop add id 1 via $via_add dev $rp2 + ip nexthop add id 10 group 1 type resilient buckets 32 + ip route add $dip nhid 10 + + t0_packets=$(devlink_trap_rx_packets_get $trap_name) + ping_do $h1 $dip + t1_packets=$(devlink_trap_rx_packets_get $trap_name) + + if [[ $t0_packets -eq $t1_packets ]]; then + check_err 1 "Trap counter did not increase" + fi + + ip route del $dip nhid 10 + ip nexthop del id 10 + ip nexthop del id 1 + log_test "Unresolved neigh: nexthop bucket does not exist: $desc" +} + +unresolved_neigh_test() +{ + __host_miss_test "IPv4" 198.51.100.1 + __host_miss_test "IPv6" 2001:db8:2::1 + __invalid_nexthop_test "IPv4" 198.51.100.1 198.51.100.3 24 198.51.100.4 + __invalid_nexthop_test "IPv6" 2001:db8:2::1 2001:db8:2::3 64 \ + 2001:db8:2::4 + __invalid_nexthop_bucket_test "IPv4" 198.51.100.1 198.51.100.4 + __invalid_nexthop_bucket_test "IPv6" 2001:db8:2::1 2001:db8:2::4 +} + +vrf_without_routes_create() +{ + # VRF creating makes the links to be down and then up again. + # By default, IPv6 address is not saved after link becomes down. + # Save IPv6 address using sysctl configuration. + sysctl_set net.ipv6.conf.$rp1.keep_addr_on_down 1 + sysctl_set net.ipv6.conf.$rp2.keep_addr_on_down 1 + + ip link add dev vrf1 type vrf table 101 + ip link set dev $rp1 master vrf1 + ip link set dev $rp2 master vrf1 + ip link set dev vrf1 up + + # Wait for rp1 and rp2 to be up + setup_wait +} + +vrf_without_routes_destroy() +{ + ip link set dev $rp1 nomaster + ip link set dev $rp2 nomaster + ip link del dev vrf1 + + sysctl_restore net.ipv6.conf.$rp2.keep_addr_on_down + sysctl_restore net.ipv6.conf.$rp1.keep_addr_on_down + + # Wait for interfaces to be up + setup_wait +} + +ipv4_lpm_miss_test() +{ + local trap_name="ipv4_lpm_miss" + local expected_action="trap" + local mz_pid + + RET=0 + + ping_check $trap_name + trap_action_check $trap_name $expected_action + + # Create a VRF without a default route + vrf_without_routes_create + + # Generate packets through a VRF without a matching route. + $MZ $h1 -t udp "sp=54321,dp=12345" -c 0 -d 1msec -b $rp1mac \ + -B 203.0.113.1 -q & + mz_pid=$! + + devlink_trap_exception_test $trap_name + + log_test "LPM miss: IPv4" + + kill $mz_pid && wait $mz_pid &> /dev/null + vrf_without_routes_destroy +} + +ipv6_lpm_miss_test() +{ + local trap_name="ipv6_lpm_miss" + local expected_action="trap" + local mz_pid + + RET=0 + + ping_check $trap_name + trap_action_check $trap_name $expected_action + + # Create a VRF without a default route + vrf_without_routes_create + + # Generate packets through a VRF without a matching route. + $MZ -6 $h1 -t udp "sp=54321,dp=12345" -c 0 -d 1msec -b $rp1mac \ + -B 2001:db8::1 -q & + mz_pid=$! + + devlink_trap_exception_test $trap_name + + log_test "LPM miss: IPv6" + + kill $mz_pid && wait $mz_pid &> /dev/null + vrf_without_routes_destroy +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_policer.sh b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_policer.sh new file mode 100755 index 000000000..0bd5ffc21 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_policer.sh @@ -0,0 +1,369 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test devlink-trap policer functionality over mlxsw. + +# +---------------------------------+ +# | H1 (vrf) | +# | + $h1 | +# | | 192.0.2.1/24 | +# | | | +# | | default via 192.0.2.2 | +# +----|----------------------------+ +# | +# +----|----------------------------------------------------------------------+ +# | SW | | +# | + $rp1 | +# | 192.0.2.2/24 | +# | | +# | 198.51.100.2/24 | +# | + $rp2 | +# | | | +# +----|----------------------------------------------------------------------+ +# | +# +----|----------------------------+ +# | | default via 198.51.100.2 | +# | | | +# | | 198.51.100.1/24 | +# | + $h2 | +# | H2 (vrf) | +# +---------------------------------+ + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + rate_limits_test + burst_limits_test + rate_test + burst_test +" +NUM_NETIFS=4 +source $lib_dir/tc_common.sh +source $lib_dir/lib.sh +source $lib_dir/devlink_lib.sh + +h1_create() +{ + simple_if_init $h1 192.0.2.1/24 + mtu_set $h1 10000 + + ip -4 route add default vrf v$h1 nexthop via 192.0.2.2 +} + +h1_destroy() +{ + ip -4 route del default vrf v$h1 nexthop via 192.0.2.2 + + mtu_restore $h1 + simple_if_fini $h1 192.0.2.1/24 +} + +h2_create() +{ + simple_if_init $h2 198.51.100.1/24 + mtu_set $h2 10000 + + ip -4 route add default vrf v$h2 nexthop via 198.51.100.2 +} + +h2_destroy() +{ + ip -4 route del default vrf v$h2 nexthop via 198.51.100.2 + + mtu_restore $h2 + simple_if_fini $h2 198.51.100.1/24 +} + +router_create() +{ + ip link set dev $rp1 up + ip link set dev $rp2 up + + __addr_add_del $rp1 add 192.0.2.2/24 + __addr_add_del $rp2 add 198.51.100.2/24 + mtu_set $rp1 10000 + mtu_set $rp2 10000 + + ip -4 route add blackhole 198.51.100.100 + + devlink trap set $DEVLINK_DEV trap blackhole_route action trap +} + +router_destroy() +{ + devlink trap set $DEVLINK_DEV trap blackhole_route action drop + + ip -4 route del blackhole 198.51.100.100 + + mtu_restore $rp2 + mtu_restore $rp1 + __addr_add_del $rp2 del 198.51.100.2/24 + __addr_add_del $rp1 del 192.0.2.2/24 + + ip link set dev $rp2 down + ip link set dev $rp1 down +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + rp1=${NETIFS[p2]} + + rp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + rp1_mac=$(mac_get $rp1) + + vrf_prepare + + h1_create + h2_create + + router_create +} + +cleanup() +{ + pre_cleanup + + router_destroy + + h2_destroy + h1_destroy + + vrf_cleanup + + # Reload to ensure devlink-trap settings are back to default. + devlink_reload +} + +rate_limits_test() +{ + RET=0 + + devlink trap policer set $DEVLINK_DEV policer 1 rate 0 &> /dev/null + check_fail $? "Policer rate was changed to rate lower than limit" + devlink trap policer set $DEVLINK_DEV policer 1 \ + rate 2000000001 &> /dev/null + check_fail $? "Policer rate was changed to rate higher than limit" + + devlink trap policer set $DEVLINK_DEV policer 1 rate 1 + check_err $? "Failed to set policer rate to minimum" + devlink trap policer set $DEVLINK_DEV policer 1 rate 2000000000 + check_err $? "Failed to set policer rate to maximum" + + log_test "Trap policer rate limits" +} + +burst_limits_test() +{ + RET=0 + + devlink trap policer set $DEVLINK_DEV policer 1 burst 0 &> /dev/null + check_fail $? "Policer burst size was changed to 0" + devlink trap policer set $DEVLINK_DEV policer 1 burst 17 &> /dev/null + check_fail $? "Policer burst size was changed to burst size that is not power of 2" + devlink trap policer set $DEVLINK_DEV policer 1 burst 8 &> /dev/null + check_fail $? "Policer burst size was changed to burst size lower than limit" + devlink trap policer set $DEVLINK_DEV policer 1 \ + burst $((2**25)) &> /dev/null + check_fail $? "Policer burst size was changed to burst size higher than limit" + + devlink trap policer set $DEVLINK_DEV policer 1 burst 16 + check_err $? "Failed to set policer burst size to minimum" + devlink trap policer set $DEVLINK_DEV policer 1 burst $((2**24)) + check_err $? "Failed to set policer burst size to maximum" + + log_test "Trap policer burst size limits" +} + +trap_rate_get() +{ + local t0 t1 + + t0=$(devlink_trap_rx_packets_get blackhole_route) + sleep 10 + t1=$(devlink_trap_rx_packets_get blackhole_route) + + echo $(((t1 - t0) / 10)) +} + +policer_drop_rate_get() +{ + local id=$1; shift + local t0 t1 + + t0=$(devlink_trap_policer_rx_dropped_get $id) + sleep 10 + t1=$(devlink_trap_policer_rx_dropped_get $id) + + echo $(((t1 - t0) / 10)) +} + +__rate_test() +{ + local rate pct drop_rate + local id=$1; shift + + RET=0 + + devlink trap policer set $DEVLINK_DEV policer $id rate 1000 burst 512 + devlink trap group set $DEVLINK_DEV group l3_drops policer $id + + # Send packets at highest possible rate and make sure they are dropped + # by the policer. Make sure measured received rate is about 1000 pps + log_info "=== Tx rate: Highest, Policer rate: 1000 pps ===" + + start_traffic $h1 192.0.2.1 198.51.100.100 $rp1_mac + + sleep 5 # Take measurements when rate is stable + + rate=$(trap_rate_get) + pct=$((100 * (rate - 1000) / 1000)) + ((-10 <= pct && pct <= 10)) + check_err $? "Expected rate 1000 pps, got $rate pps, which is $pct% off. Required accuracy is +-10%" + log_info "Expected rate 1000 pps, measured rate $rate pps" + + drop_rate=$(policer_drop_rate_get $id) + (( drop_rate > 0 )) + check_err $? "Expected non-zero policer drop rate, got 0" + log_info "Measured policer drop rate of $drop_rate pps" + + stop_traffic + + # Send packets at a rate of 1000 pps and make sure they are not dropped + # by the policer + log_info "=== Tx rate: 1000 pps, Policer rate: 1000 pps ===" + + start_traffic $h1 192.0.2.1 198.51.100.100 $rp1_mac -d 1msec + + sleep 5 # Take measurements when rate is stable + + drop_rate=$(policer_drop_rate_get $id) + (( drop_rate == 0 )) + check_err $? "Expected zero policer drop rate, got a drop rate of $drop_rate pps" + log_info "Measured policer drop rate of $drop_rate pps" + + stop_traffic + + # Unbind the policer and send packets at highest possible rate. Make + # sure they are not dropped by the policer and that the measured + # received rate is higher than 1000 pps + log_info "=== Tx rate: Highest, Policer rate: No policer ===" + + devlink trap group set $DEVLINK_DEV group l3_drops nopolicer + + start_traffic $h1 192.0.2.1 198.51.100.100 $rp1_mac + + rate=$(trap_rate_get) + (( rate > 1000 )) + check_err $? "Expected rate higher than 1000 pps, got $rate pps" + log_info "Measured rate $rate pps" + + drop_rate=$(policer_drop_rate_get $id) + (( drop_rate == 0 )) + check_err $? "Expected zero policer drop rate, got a drop rate of $drop_rate pps" + log_info "Measured policer drop rate of $drop_rate pps" + + stop_traffic + + log_test "Trap policer rate" +} + +rate_test() +{ + local last_policer=$(devlink -j -p trap policer show | + jq '[.[]["'$DEVLINK_DEV'"][].policer] | max') + + log_info "Running rate test for policer 1" + __rate_test 1 + + log_info "Running rate test for policer $((last_policer / 2))" + __rate_test $((last_policer / 2)) + + log_info "Running rate test for policer $last_policer" + __rate_test $last_policer +} + +__burst_test() +{ + local t0_rx t0_drop t1_rx t1_drop rx drop + local id=$1; shift + + RET=0 + + devlink trap policer set $DEVLINK_DEV policer $id rate 1000 burst 512 + devlink trap group set $DEVLINK_DEV group l3_drops policer $id + + # Send a burst of 16 packets and make sure that 16 are received + # and that none are dropped by the policer + log_info "=== Tx burst size: 16, Policer burst size: 512 ===" + + t0_rx=$(devlink_trap_rx_packets_get blackhole_route) + t0_drop=$(devlink_trap_policer_rx_dropped_get $id) + + start_traffic $h1 192.0.2.1 198.51.100.100 $rp1_mac -c 16 + + t1_rx=$(devlink_trap_rx_packets_get blackhole_route) + t1_drop=$(devlink_trap_policer_rx_dropped_get $id) + + rx=$((t1_rx - t0_rx)) + (( rx == 16 )) + check_err $? "Expected burst size of 16 packets, got $rx packets" + log_info "Expected burst size of 16 packets, measured burst size of $rx packets" + + drop=$((t1_drop - t0_drop)) + (( drop == 0 )) + check_err $? "Expected zero policer drops, got $drop" + log_info "Measured policer drops of $drop packets" + + # Unbind the policer and send a burst of 64 packets. Make sure that + # 64 packets are received and that none are dropped by the policer + log_info "=== Tx burst size: 64, Policer burst size: No policer ===" + + devlink trap group set $DEVLINK_DEV group l3_drops nopolicer + + t0_rx=$(devlink_trap_rx_packets_get blackhole_route) + t0_drop=$(devlink_trap_policer_rx_dropped_get $id) + + start_traffic $h1 192.0.2.1 198.51.100.100 $rp1_mac -c 64 + + t1_rx=$(devlink_trap_rx_packets_get blackhole_route) + t1_drop=$(devlink_trap_policer_rx_dropped_get $id) + + rx=$((t1_rx - t0_rx)) + (( rx == 64 )) + check_err $? "Expected burst size of 64 packets, got $rx packets" + log_info "Expected burst size of 64 packets, measured burst size of $rx packets" + + drop=$((t1_drop - t0_drop)) + (( drop == 0 )) + check_err $? "Expected zero policer drops, got $drop" + log_info "Measured policer drops of $drop packets" + + log_test "Trap policer burst size" +} + +burst_test() +{ + local last_policer=$(devlink -j -p trap policer show | + jq '[.[]["'$DEVLINK_DEV'"][].policer] | max') + + log_info "Running burst test for policer 1" + __burst_test 1 + + log_info "Running burst test for policer $((last_policer / 2))" + __burst_test $((last_policer / 2)) + + log_info "Running burst test for policer $last_policer" + __burst_test $last_policer +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_tunnel_ipip.sh b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_tunnel_ipip.sh new file mode 100755 index 000000000..e9a82cae8 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_tunnel_ipip.sh @@ -0,0 +1,249 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test devlink-trap tunnel exceptions functionality over mlxsw. +# Check all exception traps to make sure they are triggered under the right +# conditions. + +# +-------------------------+ +# | H1 | +# | $h1 + | +# | 192.0.2.1/28 | | +# +-------------------|-----+ +# | +# +-------------------|-----+ +# | SW1 | | +# | $swp1 + | +# | 192.0.2.2/28 | +# | | +# | + g1a (gre) | +# | loc=192.0.2.65 | +# | rem=192.0.2.66 | +# | tos=inherit | +# | | +# | + $rp1 | +# | | 198.51.100.1/28 | +# +--|----------------------+ +# | +# +--|----------------------+ +# | | VRF2 | +# | + $rp2 | +# | 198.51.100.2/28 | +# +-------------------------+ + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + decap_error_test +" + +NUM_NETIFS=4 +source $lib_dir/lib.sh +source $lib_dir/tc_common.sh +source $lib_dir/devlink_lib.sh + +h1_create() +{ + simple_if_init $h1 192.0.2.1/28 +} + +h1_destroy() +{ + simple_if_fini $h1 192.0.2.1/28 +} + +vrf2_create() +{ + simple_if_init $rp2 198.51.100.2/28 +} + +vrf2_destroy() +{ + simple_if_fini $rp2 198.51.100.2/28 +} + +switch_create() +{ + __addr_add_del $swp1 add 192.0.2.2/28 + tc qdisc add dev $swp1 clsact + ip link set dev $swp1 up + + tunnel_create g1 gre 192.0.2.65 192.0.2.66 tos inherit + __addr_add_del g1 add 192.0.2.65/32 + ip link set dev g1 up + + __addr_add_del $rp1 add 198.51.100.1/28 + ip link set dev $rp1 up +} + +switch_destroy() +{ + ip link set dev $rp1 down + __addr_add_del $rp1 del 198.51.100.1/28 + + ip link set dev g1 down + __addr_add_del g1 del 192.0.2.65/32 + tunnel_destroy g1 + + ip link set dev $swp1 down + tc qdisc del dev $swp1 clsact + __addr_add_del $swp1 del 192.0.2.2/28 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + rp1=${NETIFS[p3]} + rp2=${NETIFS[p4]} + + forwarding_enable + vrf_prepare + h1_create + switch_create + vrf2_create +} + +cleanup() +{ + pre_cleanup + + vrf2_destroy + switch_destroy + h1_destroy + vrf_cleanup + forwarding_restore +} + +ipip_payload_get() +{ + local flags=$1; shift + local key=$1; shift + + p=$(: + )"$flags"$( : GRE flags + )"0:00:"$( : Reserved + version + )"08:00:"$( : ETH protocol type + )"$key"$( : Key + )"4"$( : IP version + )"5:"$( : IHL + )"00:"$( : IP TOS + )"00:14:"$( : IP total length + )"00:00:"$( : IP identification + )"20:00:"$( : IP flags + frag off + )"30:"$( : IP TTL + )"01:"$( : IP proto + )"E7:E6:"$( : IP header csum + )"C0:00:01:01:"$( : IP saddr : 192.0.1.1 + )"C0:00:02:01:"$( : IP daddr : 192.0.2.1 + ) + echo $p +} + +ecn_payload_get() +{ + echo $(ipip_payload_get "0") +} + +ecn_decap_test() +{ + local trap_name="decap_error" + local desc=$1; shift + local ecn_desc=$1; shift + local outer_tos=$1; shift + local mz_pid + + RET=0 + + tc filter add dev $swp1 egress protocol ip pref 1 handle 101 \ + flower src_ip 192.0.1.1 dst_ip 192.0.2.1 action pass + + rp1_mac=$(mac_get $rp1) + rp2_mac=$(mac_get $rp2) + payload=$(ecn_payload_get) + + ip vrf exec v$rp2 $MZ $rp2 -c 0 -d 1msec -a $rp2_mac -b $rp1_mac \ + -A 192.0.2.66 -B 192.0.2.65 -t ip \ + len=48,tos=$outer_tos,proto=47,p=$payload -q & + + mz_pid=$! + + devlink_trap_exception_test $trap_name + + tc_check_packets "dev $swp1 egress" 101 0 + check_err $? "Packets were not dropped" + + log_test "$desc: Inner ECN is not ECT and outer is $ecn_desc" + + kill $mz_pid && wait $mz_pid &> /dev/null + tc filter del dev $swp1 egress protocol ip pref 1 handle 101 flower +} + +no_matching_tunnel_test() +{ + local trap_name="decap_error" + local desc=$1; shift + local sip=$1; shift + local mz_pid + + RET=0 + + tc filter add dev $swp1 egress protocol ip pref 1 handle 101 \ + flower src_ip 192.0.1.1 dst_ip 192.0.2.1 action pass + + rp1_mac=$(mac_get $rp1) + rp2_mac=$(mac_get $rp2) + payload=$(ipip_payload_get "$@") + + ip vrf exec v$rp2 $MZ $rp2 -c 0 -d 1msec -a $rp2_mac -b $rp1_mac \ + -A $sip -B 192.0.2.65 -t ip len=48,proto=47,p=$payload -q & + mz_pid=$! + + devlink_trap_exception_test $trap_name + + tc_check_packets "dev $swp1 egress" 101 0 + check_err $? "Packets were not dropped" + + log_test "$desc" + + kill $mz_pid && wait $mz_pid &> /dev/null + tc filter del dev $swp1 egress protocol ip pref 1 handle 101 flower +} + +decap_error_test() +{ + # Correct source IP - the remote address + local sip=192.0.2.66 + + ecn_decap_test "Decap error" "ECT(1)" 01 + ecn_decap_test "Decap error" "ECT(0)" 02 + ecn_decap_test "Decap error" "CE" 03 + + no_matching_tunnel_test "Decap error: Source IP check failed" \ + 192.0.2.68 "0" + no_matching_tunnel_test \ + "Decap error: Key exists but was not expected" $sip "2" \ + "00:00:00:E9:" + + # Destroy the tunnel and create new one with key + __addr_add_del g1 del 192.0.2.65/32 + tunnel_destroy g1 + + tunnel_create g1 gre 192.0.2.65 192.0.2.66 tos inherit key 233 + __addr_add_del g1 add 192.0.2.65/32 + + no_matching_tunnel_test \ + "Decap error: Key does not exist but was expected" $sip "0" + no_matching_tunnel_test \ + "Decap error: Packet has a wrong key field" $sip "2" \ + "00:00:00:E8:" +} + +trap cleanup EXIT + +setup_prepare +setup_wait +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_tunnel_vxlan.sh b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_tunnel_vxlan.sh new file mode 100755 index 000000000..5f6eb965c --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_tunnel_vxlan.sh @@ -0,0 +1,330 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test devlink-trap tunnel drops and exceptions functionality over mlxsw. +# Check all traps to make sure they are triggered under the right +# conditions. + +# +--------------------+ +# | H1 (vrf) | +# | + $h1 | +# | | 192.0.2.1/28 | +# +----|---------------+ +# | +# +----|----------------------------------------------------------------------+ +# | SW | | +# | +--|--------------------------------------------------------------------+ | +# | | + $swp1 BR1 (802.1d) | | +# | | | | +# | | + vx1 (vxlan) | | +# | | local 192.0.2.17 | | +# | | id 1000 dstport $VXPORT | | +# | +-----------------------------------------------------------------------+ | +# | | +# | + $rp1 | +# | | 192.0.2.17/28 | +# +----|----------------------------------------------------------------------+ +# | +# +----|--------------------------------------------------------+ +# | | VRF2 | +# | + $rp2 | +# | 192.0.2.18/28 | +# | | +# +-------------------------------------------------------------+ + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + decap_error_test + overlay_smac_is_mc_test +" + +NUM_NETIFS=4 +source $lib_dir/lib.sh +source $lib_dir/tc_common.sh +source $lib_dir/devlink_lib.sh + +: ${VXPORT:=4789} +export VXPORT + +h1_create() +{ + simple_if_init $h1 192.0.2.1/28 +} + +h1_destroy() +{ + simple_if_fini $h1 192.0.2.1/28 +} + +switch_create() +{ + ip link add name br1 type bridge vlan_filtering 0 mcast_snooping 0 + # Make sure the bridge uses the MAC address of the local port and not + # that of the VxLAN's device. + ip link set dev br1 address $(mac_get $swp1) + ip link set dev br1 up + + tc qdisc add dev $swp1 clsact + ip link set dev $swp1 master br1 + ip link set dev $swp1 up + + ip link add name vx1 type vxlan id 1000 local 192.0.2.17 \ + dstport "$VXPORT" nolearning noudpcsum tos inherit ttl 100 + ip link set dev vx1 master br1 + ip link set dev vx1 up + + ip address add dev $rp1 192.0.2.17/28 + ip link set dev $rp1 up +} + +switch_destroy() +{ + ip link set dev $rp1 down + ip address del dev $rp1 192.0.2.17/28 + + ip link set dev vx1 down + ip link set dev vx1 nomaster + ip link del dev vx1 + + ip link set dev $swp1 down + ip link set dev $swp1 nomaster + tc qdisc del dev $swp1 clsact + + ip link set dev br1 down + ip link del dev br1 +} + +vrf2_create() +{ + simple_if_init $rp2 192.0.2.18/28 +} + +vrf2_destroy() +{ + simple_if_fini $rp2 192.0.2.18/28 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + rp1=${NETIFS[p3]} + rp2=${NETIFS[p4]} + + vrf_prepare + forwarding_enable + h1_create + switch_create + vrf2_create +} + +cleanup() +{ + pre_cleanup + + vrf2_destroy + switch_destroy + h1_destroy + forwarding_restore + vrf_cleanup +} + +ecn_payload_get() +{ + dest_mac=$(mac_get $h1) + p=$(: + )"08:"$( : VXLAN flags + )"00:00:00:"$( : VXLAN reserved + )"00:03:e8:"$( : VXLAN VNI : 1000 + )"00:"$( : VXLAN reserved + )"$dest_mac:"$( : ETH daddr + )"00:00:00:00:00:00:"$( : ETH saddr + )"08:00:"$( : ETH type + )"45:"$( : IP version + IHL + )"00:"$( : IP TOS + )"00:14:"$( : IP total length + )"00:00:"$( : IP identification + )"20:00:"$( : IP flags + frag off + )"40:"$( : IP TTL + )"00:"$( : IP proto + )"D6:E5:"$( : IP header csum + )"c0:00:02:03:"$( : IP saddr: 192.0.2.3 + )"c0:00:02:01:"$( : IP daddr: 192.0.2.1 + ) + echo $p +} + +ecn_decap_test() +{ + local trap_name="decap_error" + local desc=$1; shift + local ecn_desc=$1; shift + local outer_tos=$1; shift + local mz_pid + + RET=0 + + tc filter add dev $swp1 egress protocol ip pref 1 handle 101 \ + flower src_ip 192.0.2.3 dst_ip 192.0.2.1 action pass + + rp1_mac=$(mac_get $rp1) + payload=$(ecn_payload_get) + + ip vrf exec v$rp2 $MZ $rp2 -c 0 -d 1msec -b $rp1_mac -B 192.0.2.17 \ + -t udp sp=12345,dp=$VXPORT,tos=$outer_tos,p=$payload -q & + mz_pid=$! + + devlink_trap_exception_test $trap_name + + tc_check_packets "dev $swp1 egress" 101 0 + check_err $? "Packets were not dropped" + + log_test "$desc: Inner ECN is not ECT and outer is $ecn_desc" + + kill $mz_pid && wait $mz_pid &> /dev/null + tc filter del dev $swp1 egress protocol ip pref 1 handle 101 flower +} + +reserved_bits_payload_get() +{ + dest_mac=$(mac_get $h1) + p=$(: + )"08:"$( : VXLAN flags + )"01:00:00:"$( : VXLAN reserved + )"00:03:e8:"$( : VXLAN VNI : 1000 + )"00:"$( : VXLAN reserved + )"$dest_mac:"$( : ETH daddr + )"00:00:00:00:00:00:"$( : ETH saddr + )"08:00:"$( : ETH type + )"45:"$( : IP version + IHL + )"00:"$( : IP TOS + )"00:14:"$( : IP total length + )"00:00:"$( : IP identification + )"20:00:"$( : IP flags + frag off + )"40:"$( : IP TTL + )"00:"$( : IP proto + )"00:00:"$( : IP header csum + )"c0:00:02:03:"$( : IP saddr: 192.0.2.3 + )"c0:00:02:01:"$( : IP daddr: 192.0.2.1 + ) + echo $p +} + +short_payload_get() +{ + dest_mac=$(mac_get $h1) + p=$(: + )"08:"$( : VXLAN flags + )"00:00:00:"$( : VXLAN reserved + )"00:03:e8:"$( : VXLAN VNI : 1000 + )"00:"$( : VXLAN reserved + )"$dest_mac:"$( : ETH daddr + )"00:00:00:00:00:00:"$( : ETH saddr + ) + echo $p +} + +corrupted_packet_test() +{ + local trap_name="decap_error" + local desc=$1; shift + local payload_get=$1; shift + local mz_pid + + RET=0 + + # In case of too short packet, there is no any inner packet, + # so the matching will always succeed + tc filter add dev $swp1 egress protocol ip pref 1 handle 101 \ + flower skip_hw src_ip 192.0.2.3 dst_ip 192.0.2.1 action pass + + rp1_mac=$(mac_get $rp1) + payload=$($payload_get) + ip vrf exec v$rp2 $MZ $rp2 -c 0 -d 1msec -b $rp1_mac \ + -B 192.0.2.17 -t udp sp=12345,dp=$VXPORT,p=$payload -q & + mz_pid=$! + + devlink_trap_exception_test $trap_name + + tc_check_packets "dev $swp1 egress" 101 0 + check_err $? "Packets were not dropped" + + log_test "$desc" + + kill $mz_pid && wait $mz_pid &> /dev/null + tc filter del dev $swp1 egress protocol ip pref 1 handle 101 flower +} + +decap_error_test() +{ + ecn_decap_test "Decap error" "ECT(1)" 01 + ecn_decap_test "Decap error" "ECT(0)" 02 + ecn_decap_test "Decap error" "CE" 03 + + corrupted_packet_test "Decap error: Reserved bits in use" \ + "reserved_bits_payload_get" + corrupted_packet_test "Decap error: Too short inner packet" \ + "short_payload_get" +} + +mc_smac_payload_get() +{ + dest_mac=$(mac_get $h1) + source_mac=01:02:03:04:05:06 + p=$(: + )"08:"$( : VXLAN flags + )"00:00:00:"$( : VXLAN reserved + )"00:03:e8:"$( : VXLAN VNI : 1000 + )"00:"$( : VXLAN reserved + )"$dest_mac:"$( : ETH daddr + )"$source_mac:"$( : ETH saddr + )"08:00:"$( : ETH type + )"45:"$( : IP version + IHL + )"00:"$( : IP TOS + )"00:14:"$( : IP total length + )"00:00:"$( : IP identification + )"20:00:"$( : IP flags + frag off + )"40:"$( : IP TTL + )"00:"$( : IP proto + )"00:00:"$( : IP header csum + )"c0:00:02:03:"$( : IP saddr: 192.0.2.3 + )"c0:00:02:01:"$( : IP daddr: 192.0.2.1 + ) + echo $p +} + +overlay_smac_is_mc_test() +{ + local trap_name="overlay_smac_is_mc" + local mz_pid + + RET=0 + + # The matching will be checked on devlink_trap_drop_test() + # and the filter will be removed on devlink_trap_drop_cleanup() + tc filter add dev $swp1 egress protocol ip pref 1 handle 101 \ + flower src_mac 01:02:03:04:05:06 action pass + + rp1_mac=$(mac_get $rp1) + payload=$(mc_smac_payload_get) + + ip vrf exec v$rp2 $MZ $rp2 -c 0 -d 1msec -b $rp1_mac \ + -B 192.0.2.17 -t udp sp=12345,dp=$VXPORT,p=$payload -q & + mz_pid=$! + + devlink_trap_drop_test $trap_name $swp1 101 + + log_test "Overlay source MAC is multicast" + + devlink_trap_drop_cleanup $mz_pid $swp1 "ip" 1 101 +} + +trap cleanup EXIT + +setup_prepare +setup_wait +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_tunnel_vxlan_ipv6.sh b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_tunnel_vxlan_ipv6.sh new file mode 100755 index 000000000..f6c16cbb6 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_tunnel_vxlan_ipv6.sh @@ -0,0 +1,342 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test devlink-trap tunnel drops and exceptions functionality over mlxsw. +# Check all traps to make sure they are triggered under the right +# conditions. + +# +------------------------+ +# | H1 (vrf) | +# | + $h1 | +# | | 2001:db8:1::1/64 | +# +----|-------------------+ +# | +# +----|----------------------------------------------------------------------+ +# | SW | | +# | +--|--------------------------------------------------------------------+ | +# | | + $swp1 BR1 (802.1d) | | +# | | | | +# | | + vx1 (vxlan) | | +# | | local 2001:db8:3::1 | | +# | | id 1000 dstport $VXPORT | | +# | +-----------------------------------------------------------------------+ | +# | | +# | + $rp1 | +# | | 2001:db8:3::1/64 | +# +----|----------------------------------------------------------------------+ +# | +# +----|--------------------------------------------------------+ +# | | VRF2 | +# | + $rp2 | +# | 2001:db8:3::2/64 | +# | | +# +-------------------------------------------------------------+ + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + decap_error_test + overlay_smac_is_mc_test +" + +NUM_NETIFS=4 +source $lib_dir/lib.sh +source $lib_dir/tc_common.sh +source $lib_dir/devlink_lib.sh + +: ${VXPORT:=4789} +export VXPORT + +h1_create() +{ + simple_if_init $h1 2001:db8:1::1/64 +} + +h1_destroy() +{ + simple_if_fini $h1 2001:db8:1::1/64 +} + +switch_create() +{ + ip link add name br1 type bridge vlan_filtering 0 mcast_snooping 0 + # Make sure the bridge uses the MAC address of the local port and not + # that of the VxLAN's device. + ip link set dev br1 address $(mac_get $swp1) + ip link set dev br1 up + + tc qdisc add dev $swp1 clsact + ip link set dev $swp1 master br1 + ip link set dev $swp1 up + + ip link add name vx1 type vxlan id 1000 local 2001:db8:3::1 \ + dstport "$VXPORT" nolearning udp6zerocsumrx udp6zerocsumtx \ + tos inherit ttl 100 + ip link set dev vx1 master br1 + ip link set dev vx1 up + + ip link set dev $rp1 up + ip address add dev $rp1 2001:db8:3::1/64 +} + +switch_destroy() +{ + ip address del dev $rp1 2001:db8:3::1/64 + ip link set dev $rp1 down + + ip link set dev vx1 down + ip link set dev vx1 nomaster + ip link del dev vx1 + + ip link set dev $swp1 down + ip link set dev $swp1 nomaster + tc qdisc del dev $swp1 clsact + + ip link set dev br1 down + ip link del dev br1 +} + +vrf2_create() +{ + simple_if_init $rp2 2001:db8:3::2/64 +} + +vrf2_destroy() +{ + simple_if_fini $rp2 2001:db8:3::2/64 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + rp1=${NETIFS[p3]} + rp2=${NETIFS[p4]} + + vrf_prepare + forwarding_enable + h1_create + switch_create + vrf2_create +} + +cleanup() +{ + pre_cleanup + + vrf2_destroy + switch_destroy + h1_destroy + forwarding_restore + vrf_cleanup +} + +ecn_payload_get() +{ + local dest_mac=$(mac_get $h1) + local saddr="20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:03" + local daddr="20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:01" + p=$(: + )"08:"$( : VXLAN flags + )"00:00:00:"$( : VXLAN reserved + )"00:03:e8:"$( : VXLAN VNI : 1000 + )"00:"$( : VXLAN reserved + )"$dest_mac:"$( : ETH daddr + )"00:00:00:00:00:00:"$( : ETH saddr + )"86:dd:"$( : ETH type + )"6"$( : IP version + )"0:0"$( : Traffic class + )"0:00:00:"$( : Flow label + )"00:08:"$( : Payload length + )"3a:"$( : Next header + )"04:"$( : Hop limit + )"$saddr:"$( : IP saddr + )"$daddr:"$( : IP daddr + )"80:"$( : ICMPv6.type + )"00:"$( : ICMPv6.code + )"00:"$( : ICMPv6.checksum + ) + echo $p +} + +ecn_decap_test() +{ + local trap_name="decap_error" + local desc=$1; shift + local ecn_desc=$1; shift + local outer_tos=$1; shift + local mz_pid + + RET=0 + + tc filter add dev $swp1 egress protocol ipv6 pref 1 handle 101 \ + flower src_ip 2001:db8:1::3 dst_ip 2001:db8:1::1 action pass + + rp1_mac=$(mac_get $rp1) + payload=$(ecn_payload_get) + + ip vrf exec v$rp2 $MZ -6 $rp2 -c 0 -d 1msec -b $rp1_mac \ + -B 2001:db8:3::1 -t udp \ + sp=12345,dp=$VXPORT,tos=$outer_tos,p=$payload -q & + mz_pid=$! + + devlink_trap_exception_test $trap_name + + tc_check_packets "dev $swp1 egress" 101 0 + check_err $? "Packets were not dropped" + + log_test "$desc: Inner ECN is not ECT and outer is $ecn_desc" + + kill $mz_pid && wait $mz_pid &> /dev/null + tc filter del dev $swp1 egress protocol ipv6 pref 1 handle 101 flower +} + +reserved_bits_payload_get() +{ + local dest_mac=$(mac_get $h1) + local saddr="20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:03" + local daddr="20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:01" + p=$(: + )"08:"$( : VXLAN flags + )"01:00:00:"$( : VXLAN reserved + )"00:03:e8:"$( : VXLAN VNI : 1000 + )"00:"$( : VXLAN reserved + )"$dest_mac:"$( : ETH daddr + )"00:00:00:00:00:00:"$( : ETH saddr + )"86:dd:"$( : ETH type + )"6"$( : IP version + )"0:0"$( : Traffic class + )"0:00:00:"$( : Flow label + )"00:08:"$( : Payload length + )"3a:"$( : Next header + )"04:"$( : Hop limit + )"$saddr:"$( : IP saddr + )"$daddr:"$( : IP daddr + )"80:"$( : ICMPv6.type + )"00:"$( : ICMPv6.code + )"00:"$( : ICMPv6.checksum + ) + echo $p +} + +short_payload_get() +{ + dest_mac=$(mac_get $h1) + p=$(: + )"08:"$( : VXLAN flags + )"00:00:00:"$( : VXLAN reserved + )"00:03:e8:"$( : VXLAN VNI : 1000 + )"00:"$( : VXLAN reserved + )"$dest_mac:"$( : ETH daddr + )"00:00:00:00:00:00:"$( : ETH saddr + ) + echo $p +} + +corrupted_packet_test() +{ + local trap_name="decap_error" + local desc=$1; shift + local payload_get=$1; shift + local mz_pid + + RET=0 + + # In case of too short packet, there is no any inner packet, + # so the matching will always succeed + tc filter add dev $swp1 egress protocol ipv6 pref 1 handle 101 \ + flower skip_hw src_ip 2001:db8:3::1 dst_ip 2001:db8:1::1 \ + action pass + + rp1_mac=$(mac_get $rp1) + payload=$($payload_get) + ip vrf exec v$rp2 $MZ -6 $rp2 -c 0 -d 1msec -b $rp1_mac \ + -B 2001:db8:3::1 -t udp sp=12345,dp=$VXPORT,p=$payload -q & + mz_pid=$! + + devlink_trap_exception_test $trap_name + + tc_check_packets "dev $swp1 egress" 101 0 + check_err $? "Packets were not dropped" + + log_test "$desc" + + kill $mz_pid && wait $mz_pid &> /dev/null + tc filter del dev $swp1 egress protocol ipv6 pref 1 handle 101 flower +} + +decap_error_test() +{ + ecn_decap_test "Decap error" "ECT(1)" 01 + ecn_decap_test "Decap error" "ECT(0)" 02 + ecn_decap_test "Decap error" "CE" 03 + + corrupted_packet_test "Decap error: Reserved bits in use" \ + "reserved_bits_payload_get" + corrupted_packet_test "Decap error: Too short inner packet" \ + "short_payload_get" +} + +mc_smac_payload_get() +{ + local dest_mac=$(mac_get $h1) + local source_mac="01:02:03:04:05:06" + local saddr="20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:03" + local daddr="20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:01" + p=$(: + )"08:"$( : VXLAN flags + )"00:00:00:"$( : VXLAN reserved + )"00:03:e8:"$( : VXLAN VNI : 1000 + )"00:"$( : VXLAN reserved + )"$dest_mac:"$( : ETH daddr + )"$source_mac:"$( : ETH saddr + )"86:dd:"$( : ETH type + )"6"$( : IP version + )"0:0"$( : Traffic class + )"0:00:00:"$( : Flow label + )"00:08:"$( : Payload length + )"3a:"$( : Next header + )"04:"$( : Hop limit + )"$saddr:"$( : IP saddr + )"$daddr:"$( : IP daddr + )"80:"$( : ICMPv6.type + )"00:"$( : ICMPv6.code + )"00:"$( : ICMPv6.checksum + ) + echo $p +} + +overlay_smac_is_mc_test() +{ + local trap_name="overlay_smac_is_mc" + local mz_pid + + RET=0 + + # The matching will be checked on devlink_trap_drop_test() + # and the filter will be removed on devlink_trap_drop_cleanup() + tc filter add dev $swp1 egress protocol ipv6 pref 1 handle 101 \ + flower src_mac 01:02:03:04:05:06 action pass + + rp1_mac=$(mac_get $rp1) + payload=$(mc_smac_payload_get) + + ip vrf exec v$rp2 $MZ -6 $rp2 -c 0 -d 1msec -b $rp1_mac \ + -B 2001:db8:3::1 -t udp sp=12345,dp=$VXPORT,p=$payload -q & + mz_pid=$! + + devlink_trap_drop_test $trap_name $swp1 101 + + log_test "Overlay source MAC is multicast" + + devlink_trap_drop_cleanup $mz_pid $swp1 "ipv6" 1 101 +} + +trap cleanup EXIT + +setup_prepare +setup_wait +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/egress_vid_classification.sh b/tools/testing/selftests/drivers/net/mlxsw/egress_vid_classification.sh new file mode 100755 index 000000000..0cf9e47e3 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/egress_vid_classification.sh @@ -0,0 +1,273 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Test VLAN classification after routing and verify that the order of +# configuration does not impact switch behavior. Verify that {RIF, Port}->VID +# mapping is added correctly for existing {Port, VID}->FID mapping and that +# {RIF, Port}->VID mapping is added correctly for new {Port, VID}->FID mapping. + +# +-------------------+ +--------------------+ +# | H1 | | H2 | +# | | | | +# | $h1.10 + | | + $h2.10 | +# | 192.0.2.1/28 | | | | 192.0.2.3/28 | +# | | | | | | +# | $h1 + | | + $h2 | +# +----------------|--+ +--|-----------------+ +# | | +# +----------------|-------------------------|-----------------+ +# | SW | | | +# | +--------------|-------------------------|---------------+ | +# | | $swp1 + + $swp2 | | +# | | | | | | +# | | $swp1.10 + + $swp2.10 | | +# | | | | +# | | br0 | | +# | | 192.0.2.2/28 | | +# | +--------------------------------------------------------+ | +# | | +# | $swp3.20 + | +# | 192.0.2.17/28 | | +# | | | +# | $swp3 + | +# +---------------|--------------------------------------------+ +# | +# +---------------|--+ +# | $h3 + | +# | | | +# | $h3.20 + | +# | 192.0.2.18/28 | +# | | +# | H3 | +# +------------------+ + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + port_vid_map_rif + rif_port_vid_map +" + +NUM_NETIFS=6 +source $lib_dir/lib.sh +source $lib_dir/tc_common.sh +source $lib_dir/devlink_lib.sh + +h1_create() +{ + simple_if_init $h1 + vlan_create $h1 10 v$h1 192.0.2.1/28 + + ip route add 192.0.2.16/28 vrf v$h1 nexthop via 192.0.2.2 +} + +h1_destroy() +{ + ip route del 192.0.2.16/28 vrf v$h1 nexthop via 192.0.2.2 + + vlan_destroy $h1 10 + simple_if_fini $h1 +} + +h2_create() +{ + simple_if_init $h2 + vlan_create $h2 10 v$h2 192.0.2.3/28 +} + +h2_destroy() +{ + vlan_destroy $h2 10 + simple_if_fini $h2 +} + +h3_create() +{ + simple_if_init $h3 + vlan_create $h3 20 v$h3 192.0.2.18/28 + + ip route add 192.0.2.0/28 vrf v$h3 nexthop via 192.0.2.17 +} + +h3_destroy() +{ + ip route del 192.0.2.0/28 vrf v$h3 nexthop via 192.0.2.17 + + vlan_destroy $h3 20 + simple_if_fini $h3 +} + +switch_create() +{ + ip link set dev $swp1 up + tc qdisc add dev $swp1 clsact + + ip link add dev br0 type bridge mcast_snooping 0 + + # By default, a link-local address is generated when netdevice becomes + # up. Adding an address to the bridge will cause creating a RIF for it. + # Prevent generating link-local address to be able to control when the + # RIF is added. + sysctl_set net.ipv6.conf.br0.addr_gen_mode 1 + ip link set dev br0 up + + ip link set dev $swp2 up + vlan_create $swp2 10 + ip link set dev $swp2.10 master br0 + + ip link set dev $swp3 up + vlan_create $swp3 20 "" 192.0.2.17/28 + + # Replace neighbor to avoid 1 packet which is forwarded in software due + # to "unresolved neigh". + ip neigh replace dev $swp3.20 192.0.2.18 lladdr $(mac_get $h3.20) +} + +switch_destroy() +{ + vlan_destroy $swp3 20 + ip link set dev $swp3 down + + ip link set dev $swp2.10 nomaster + vlan_destroy $swp2 10 + ip link set dev $swp2 down + + ip link set dev br0 down + sysctl_restore net.ipv6.conf.br0.addr_gen_mode + ip link del dev br0 + + tc qdisc del dev $swp1 clsact + ip link set dev $swp1 down +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + swp3=${NETIFS[p5]} + h3=${NETIFS[p6]} + + vrf_prepare + forwarding_enable + + h1_create + h2_create + h3_create + + switch_create +} + +cleanup() +{ + pre_cleanup + + switch_destroy + + h3_destroy + h2_destroy + h1_destroy + + forwarding_restore + vrf_cleanup +} + +bridge_rif_add() +{ + rifs_occ_t0=$(devlink_resource_occ_get rifs) + __addr_add_del br0 add 192.0.2.2/28 + rifs_occ_t1=$(devlink_resource_occ_get rifs) + + expected_rifs=$((rifs_occ_t0 + 1)) + + [[ $expected_rifs -eq $rifs_occ_t1 ]] + check_err $? "Expected $expected_rifs RIFs, $rifs_occ_t1 are used" + + sleep 1 +} + +bridge_rif_del() +{ + __addr_add_del br0 del 192.0.2.2/28 +} + +port_vid_map_rif() +{ + RET=0 + + # First add {port, VID}->FID for swp1.10, then add a RIF and verify that + # packets get the correct VID after routing. + vlan_create $swp1 10 + ip link set dev $swp1.10 master br0 + bridge_rif_add + + # Replace neighbor to avoid 1 packet which is forwarded in software due + # to "unresolved neigh". + ip neigh replace dev br0 192.0.2.1 lladdr $(mac_get $h1.10) + + # The hardware matches on the first ethertype which is not VLAN, + # so the protocol should be IP. + tc filter add dev $swp1 egress protocol ip pref 1 handle 101 \ + flower skip_sw dst_ip 192.0.2.1 action pass + + ping_do $h1.10 192.0.2.18 + check_err $? "Ping failed" + + tc_check_at_least_x_packets "dev $swp1 egress" 101 10 + check_err $? "Packets were not routed in hardware" + + log_test "Add RIF for existing {port, VID}->FID mapping" + + tc filter del dev $swp1 egress + + bridge_rif_del + ip link set dev $swp1.10 nomaster + vlan_destroy $swp1 10 +} + +rif_port_vid_map() +{ + RET=0 + + # First add an address to the bridge, which will create a RIF on top of + # it, then add a new {port, VID}->FID mapping and verify that packets + # get the correct VID after routing. + bridge_rif_add + vlan_create $swp1 10 + ip link set dev $swp1.10 master br0 + + # Replace neighbor to avoid 1 packet which is forwarded in software due + # to "unresolved neigh". + ip neigh replace dev br0 192.0.2.1 lladdr $(mac_get $h1.10) + + # The hardware matches on the first ethertype which is not VLAN, + # so the protocol should be IP. + tc filter add dev $swp1 egress protocol ip pref 1 handle 101 \ + flower skip_sw dst_ip 192.0.2.1 action pass + + ping_do $h1.10 192.0.2.18 + check_err $? "Ping failed" + + tc_check_at_least_x_packets "dev $swp1 egress" 101 10 + check_err $? "Packets were not routed in hardware" + + log_test "Add {port, VID}->FID mapping for FID with a RIF" + + tc filter del dev $swp1 egress + + ip link set dev $swp1.10 nomaster + vlan_destroy $swp1 10 + bridge_rif_del +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/ethtool_lanes.sh b/tools/testing/selftests/drivers/net/mlxsw/ethtool_lanes.sh new file mode 100755 index 000000000..91891b941 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/ethtool_lanes.sh @@ -0,0 +1,187 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + autoneg + autoneg_force_mode +" + +NUM_NETIFS=2 +: ${TIMEOUT:=30000} # ms +source $lib_dir/lib.sh +source $lib_dir/ethtool_lib.sh + +setup_prepare() +{ + swp1=${NETIFS[p1]} + swp2=${NETIFS[p2]} + + ip link set dev $swp1 up + ip link set dev $swp2 up + + busywait "$TIMEOUT" wait_for_port_up ethtool $swp2 + check_err $? "ports did not come up" + + local lanes_exist=$(ethtool $swp1 | grep 'Lanes:') + if [[ -z $lanes_exist ]]; then + log_test "SKIP: driver does not support lanes setting" + exit 1 + fi + + ip link set dev $swp2 down + ip link set dev $swp1 down +} + +check_lanes() +{ + local dev=$1; shift + local lanes=$1; shift + local max_speed=$1; shift + local chosen_lanes + + chosen_lanes=$(ethtool $dev | grep 'Lanes:') + chosen_lanes=${chosen_lanes#*"Lanes: "} + + ((chosen_lanes == lanes)) + check_err $? "swp1 advertise $max_speed and $lanes, devs sync to $chosen_lanes" +} + +check_unsupported_lanes() +{ + local dev=$1; shift + local max_speed=$1; shift + local max_lanes=$1; shift + local autoneg=$1; shift + local autoneg_str="" + + local unsupported_lanes=$((max_lanes *= 2)) + + if [[ $autoneg -eq 0 ]]; then + autoneg_str="autoneg off" + fi + + ethtool -s $swp1 speed $max_speed lanes $unsupported_lanes $autoneg_str &> /dev/null + check_fail $? "Unsuccessful $unsupported_lanes lanes setting was expected" +} + +max_speed_and_lanes_get() +{ + local dev=$1; shift + local arr=("$@") + local max_lanes + local max_speed + local -a lanes_arr + local -a speeds_arr + local -a max_values + + for ((i=0; i<${#arr[@]}; i+=2)); do + speeds_arr+=("${arr[$i]}") + lanes_arr+=("${arr[i+1]}") + done + + max_values+=($(get_max "${speeds_arr[@]}")) + max_values+=($(get_max "${lanes_arr[@]}")) + + echo ${max_values[@]} +} + +search_linkmode() +{ + local speed=$1; shift + local lanes=$1; shift + local arr=("$@") + + for ((i=0; i<${#arr[@]}; i+=2)); do + if [[ $speed -eq ${arr[$i]} && $lanes -eq ${arr[i+1]} ]]; then + return 1 + fi + done + return 0 +} + +autoneg() +{ + RET=0 + + local lanes + local max_speed + local max_lanes + + local -a linkmodes_params=($(dev_linkmodes_params_get $swp1 1)) + local -a max_values=($(max_speed_and_lanes_get $swp1 "${linkmodes_params[@]}")) + max_speed=${max_values[0]} + max_lanes=${max_values[1]} + + lanes=$max_lanes + + while [[ $lanes -ge 1 ]]; do + search_linkmode $max_speed $lanes "${linkmodes_params[@]}" + if [[ $? -eq 1 ]]; then + ethtool_set $swp1 speed $max_speed lanes $lanes + ip link set dev $swp1 up + ip link set dev $swp2 up + busywait "$TIMEOUT" wait_for_port_up ethtool $swp2 + check_err $? "ports did not come up" + + check_lanes $swp1 $lanes $max_speed + log_test "$lanes lanes is autonegotiated" + fi + let $((lanes /= 2)) + done + + check_unsupported_lanes $swp1 $max_speed $max_lanes 1 + log_test "Lanes number larger than max width is not set" + + ip link set dev $swp2 down + ip link set dev $swp1 down +} + +autoneg_force_mode() +{ + RET=0 + + local lanes + local max_speed + local max_lanes + + local -a linkmodes_params=($(dev_linkmodes_params_get $swp1 1)) + local -a max_values=($(max_speed_and_lanes_get $swp1 "${linkmodes_params[@]}")) + max_speed=${max_values[0]} + max_lanes=${max_values[1]} + + lanes=$max_lanes + + while [[ $lanes -ge 1 ]]; do + search_linkmode $max_speed $lanes "${linkmodes_params[@]}" + if [[ $? -eq 1 ]]; then + ethtool_set $swp1 speed $max_speed lanes $lanes autoneg off + ethtool_set $swp2 speed $max_speed lanes $lanes autoneg off + ip link set dev $swp1 up + ip link set dev $swp2 up + busywait "$TIMEOUT" wait_for_port_up ethtool $swp2 + check_err $? "ports did not come up" + + check_lanes $swp1 $lanes $max_speed + log_test "Autoneg off, $lanes lanes detected during force mode" + fi + let $((lanes /= 2)) + done + + check_unsupported_lanes $swp1 $max_speed $max_lanes 0 + log_test "Lanes number larger than max width is not set" + + ip link set dev $swp2 down + ip link set dev $swp1 down + + ethtool -s $swp2 autoneg on + ethtool -s $swp1 autoneg on +} + +check_ethtool_lanes_support +setup_prepare + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/extack.sh b/tools/testing/selftests/drivers/net/mlxsw/extack.sh new file mode 100755 index 000000000..7a0a99c1d --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/extack.sh @@ -0,0 +1,170 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test operations that we expect to report extended ack. + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + netdev_pre_up_test + vxlan_vlan_add_test + vxlan_bridge_create_test + bridge_create_test +" +NUM_NETIFS=2 +source $lib_dir/lib.sh + +setup_prepare() +{ + swp1=${NETIFS[p1]} + swp2=${NETIFS[p2]} + + ip link set dev $swp1 up + ip link set dev $swp2 up +} + +cleanup() +{ + pre_cleanup + + ip link set dev $swp2 down + ip link set dev $swp1 down +} + +netdev_pre_up_test() +{ + RET=0 + + ip link add name br1 up type bridge vlan_filtering 0 mcast_snooping 0 + ip link add name vx1 up type vxlan id 1000 \ + local 192.0.2.17 remote 192.0.2.18 \ + dstport 4789 nolearning noudpcsum tos inherit ttl 100 + + ip link set dev vx1 master br1 + check_err $? + + ip link set dev $swp1 master br1 + check_err $? + + ip link add name br2 up type bridge vlan_filtering 0 mcast_snooping 0 + ip link add name vx2 up type vxlan id 2000 \ + local 192.0.2.17 remote 192.0.2.18 \ + dstport 4789 nolearning noudpcsum tos inherit ttl 100 + + ip link set dev vx2 master br2 + check_err $? + + ip link set dev $swp2 master br2 + check_err $? + + # Unsupported configuration: mlxsw demands that all offloaded VXLAN + # devices have the same TTL. + ip link set dev vx2 down + ip link set dev vx2 type vxlan ttl 200 + + ip link set dev vx2 up &>/dev/null + check_fail $? + + ip link set dev vx2 up 2>&1 >/dev/null | grep -q mlxsw_spectrum + check_err $? + + log_test "extack - NETDEV_PRE_UP" + + ip link del dev vx2 + ip link del dev br2 + + ip link del dev vx1 + ip link del dev br1 +} + +vxlan_vlan_add_test() +{ + RET=0 + + ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 0 + + # Unsupported configuration: mlxsw demands VXLAN with "noudpcsum". + ip link add name vx1 up type vxlan id 1000 \ + local 192.0.2.17 remote 192.0.2.18 \ + dstport 4789 tos inherit ttl 100 + + ip link set dev vx1 master br1 + check_err $? + + bridge vlan add dev vx1 vid 1 + check_err $? + + ip link set dev $swp1 master br1 + check_err $? + + bridge vlan add dev vx1 vid 1 pvid untagged 2>&1 >/dev/null \ + | grep -q mlxsw_spectrum + check_err $? + + log_test "extack - map VLAN at VXLAN device" + + ip link del dev vx1 + ip link del dev br1 +} + +vxlan_bridge_create_test() +{ + RET=0 + + # Unsupported configuration: mlxsw demands VXLAN with "noudpcsum". + ip link add name vx1 up type vxlan id 1000 \ + local 192.0.2.17 remote 192.0.2.18 \ + dstport 4789 tos inherit ttl 100 + + # Test with VLAN-aware bridge. + ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 0 + + ip link set dev vx1 master br1 + + ip link set dev $swp1 master br1 2>&1 > /dev/null \ + | grep -q mlxsw_spectrum + check_err $? + + # Test with VLAN-unaware bridge. + ip link set dev br1 type bridge vlan_filtering 0 + + ip link set dev $swp1 master br1 2>&1 > /dev/null \ + | grep -q mlxsw_spectrum + check_err $? + + log_test "extack - bridge creation with VXLAN" + + ip link del dev br1 + ip link del dev vx1 +} + +bridge_create_test() +{ + RET=0 + + ip link add name br1 up type bridge vlan_filtering 1 + ip link add name br2 up type bridge vlan_filtering 1 + + ip link set dev $swp1 master br1 + check_err $? + + # Only one VLAN-aware bridge is supported, so this should fail with + # an extack. + ip link set dev $swp2 master br2 2>&1 > /dev/null \ + | grep -q mlxsw_spectrum + check_err $? + + log_test "extack - multiple VLAN-aware bridges creation" + + ip link del dev br2 + ip link del dev br1 +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/fib.sh b/tools/testing/selftests/drivers/net/mlxsw/fib.sh new file mode 100755 index 000000000..dcbf32b99 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/fib.sh @@ -0,0 +1,270 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# This test is for checking the FIB offload API on top of mlxsw. + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + ipv4_identical_routes + ipv4_tos + ipv4_metric + ipv4_replace + ipv4_delete + ipv4_plen + ipv4_replay + ipv4_flush + ipv4_local_replace + ipv6_add + ipv6_metric + ipv6_append_single + ipv6_replace_single + ipv6_metric_multipath + ipv6_append_multipath + ipv6_replace_multipath + ipv6_append_multipath_to_single + ipv6_delete_single + ipv6_delete_multipath + ipv6_replay_single + ipv6_replay_multipath + ipv6_local_replace +" +NUM_NETIFS=0 +source $lib_dir/lib.sh +source $lib_dir/devlink_lib.sh +source $lib_dir/fib_offload_lib.sh + +ipv4_identical_routes() +{ + fib_ipv4_identical_routes_test "testns1" +} + +ipv4_tos() +{ + fib_ipv4_tos_test "testns1" +} + +ipv4_metric() +{ + fib_ipv4_metric_test "testns1" +} + +ipv4_replace() +{ + fib_ipv4_replace_test "testns1" +} + +ipv4_delete() +{ + fib_ipv4_delete_test "testns1" +} + +ipv4_plen() +{ + fib_ipv4_plen_test "testns1" +} + +ipv4_replay_metric() +{ + fib_ipv4_replay_metric_test "testns1" "$DEVLINK_DEV" +} + +ipv4_replay_tos() +{ + fib_ipv4_replay_tos_test "testns1" "$DEVLINK_DEV" +} + +ipv4_replay_plen() +{ + fib_ipv4_replay_plen_test "testns1" "$DEVLINK_DEV" +} + +ipv4_replay() +{ + ipv4_replay_metric + ipv4_replay_tos + ipv4_replay_plen +} + +ipv4_flush() +{ + fib_ipv4_flush_test "testns1" +} + +ipv4_local_replace() +{ + local ns="testns1" + + RET=0 + + ip -n $ns link add name dummy1 type dummy + ip -n $ns link set dev dummy1 up + + ip -n $ns route add table local 192.0.2.1/32 dev dummy1 + fib4_trap_check $ns "table local 192.0.2.1/32 dev dummy1" false + check_err $? "Local table route not in hardware when should" + + ip -n $ns route add table main 192.0.2.1/32 dev dummy1 + fib4_trap_check $ns "table main 192.0.2.1/32 dev dummy1" true + check_err $? "Main table route in hardware when should not" + + fib4_trap_check $ns "table local 192.0.2.1/32 dev dummy1" false + check_err $? "Local table route was replaced when should not" + + # Test that local routes can replace routes in main table. + ip -n $ns route add table main 192.0.2.2/32 dev dummy1 + fib4_trap_check $ns "table main 192.0.2.2/32 dev dummy1" false + check_err $? "Main table route not in hardware when should" + + ip -n $ns route add table local 192.0.2.2/32 dev dummy1 + fib4_trap_check $ns "table local 192.0.2.2/32 dev dummy1" false + check_err $? "Local table route did not replace route in main table when should" + + fib4_trap_check $ns "table main 192.0.2.2/32 dev dummy1" true + check_err $? "Main table route was not replaced when should" + + log_test "IPv4 local table route replacement" + + ip -n $ns link del dev dummy1 +} + +ipv6_add() +{ + fib_ipv6_add_test "testns1" +} + +ipv6_metric() +{ + fib_ipv6_metric_test "testns1" +} + +ipv6_append_single() +{ + fib_ipv6_append_single_test "testns1" +} + +ipv6_replace_single() +{ + fib_ipv6_replace_single_test "testns1" +} + +ipv6_metric_multipath() +{ + fib_ipv6_metric_multipath_test "testns1" +} + +ipv6_append_multipath() +{ + fib_ipv6_append_multipath_test "testns1" +} + +ipv6_replace_multipath() +{ + fib_ipv6_replace_multipath_test "testns1" +} + +ipv6_append_multipath_to_single() +{ + fib_ipv6_append_multipath_to_single_test "testns1" +} + +ipv6_delete_single() +{ + fib_ipv6_delete_single_test "testns1" +} + +ipv6_delete_multipath() +{ + fib_ipv6_delete_multipath_test "testns1" +} + +ipv6_replay_single() +{ + fib_ipv6_replay_single_test "testns1" "$DEVLINK_DEV" +} + +ipv6_replay_multipath() +{ + fib_ipv6_replay_multipath_test "testns1" "$DEVLINK_DEV" +} + +ipv6_local_replace() +{ + local ns="testns1" + + RET=0 + + ip -n $ns link add name dummy1 type dummy + ip -n $ns link set dev dummy1 up + + ip -n $ns route add table local 2001:db8:1::1/128 dev dummy1 + fib6_trap_check $ns "table local 2001:db8:1::1/128 dev dummy1" false + check_err $? "Local table route not in hardware when should" + + ip -n $ns route add table main 2001:db8:1::1/128 dev dummy1 + fib6_trap_check $ns "table main 2001:db8:1::1/128 dev dummy1" true + check_err $? "Main table route in hardware when should not" + + fib6_trap_check $ns "table local 2001:db8:1::1/128 dev dummy1" false + check_err $? "Local table route was replaced when should not" + + # Test that local routes can replace routes in main table. + ip -n $ns route add table main 2001:db8:1::2/128 dev dummy1 + fib6_trap_check $ns "table main 2001:db8:1::2/128 dev dummy1" false + check_err $? "Main table route not in hardware when should" + + ip -n $ns route add table local 2001:db8:1::2/128 dev dummy1 + fib6_trap_check $ns "table local 2001:db8:1::2/128 dev dummy1" false + check_err $? "Local route route did not replace route in main table when should" + + fib6_trap_check $ns "table main 2001:db8:1::2/128 dev dummy1" true + check_err $? "Main table route was not replaced when should" + + log_test "IPv6 local table route replacement" + + ip -n $ns link del dev dummy1 +} + +fib_notify_on_flag_change_set() +{ + local notify=$1; shift + + ip netns exec testns1 sysctl -qw net.ipv4.fib_notify_on_flag_change=$notify + ip netns exec testns1 sysctl -qw net.ipv6.fib_notify_on_flag_change=$notify + + log_info "Set fib_notify_on_flag_change to $notify" +} + +setup_prepare() +{ + ip netns add testns1 + if [ $? -ne 0 ]; then + echo "Failed to add netns \"testns1\"" + exit 1 + fi + + devlink dev reload $DEVLINK_DEV netns testns1 + if [ $? -ne 0 ]; then + echo "Failed to reload into netns \"testns1\"" + exit 1 + fi +} + +cleanup() +{ + pre_cleanup + devlink -N testns1 dev reload $DEVLINK_DEV netns $$ + ip netns del testns1 +} + +trap cleanup EXIT + +setup_prepare + +fib_notify_on_flag_change_set 1 +tests_run + +fib_notify_on_flag_change_set 0 +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/fib_offload.sh b/tools/testing/selftests/drivers/net/mlxsw/fib_offload.sh new file mode 100755 index 000000000..e99ae500f --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/fib_offload.sh @@ -0,0 +1,349 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test unicast FIB offload indication. + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + ipv6_route_add + ipv6_route_replace + ipv6_route_nexthop_group_share + ipv6_route_rate +" +NUM_NETIFS=4 +source $lib_dir/lib.sh +source $lib_dir/devlink_lib.sh + +tor1_create() +{ + simple_if_init $tor1_p1 2001:db8:1::2/128 2001:db8:1::3/128 +} + +tor1_destroy() +{ + simple_if_fini $tor1_p1 2001:db8:1::2/128 2001:db8:1::3/128 +} + +tor2_create() +{ + simple_if_init $tor2_p1 2001:db8:2::2/128 2001:db8:2::3/128 +} + +tor2_destroy() +{ + simple_if_fini $tor2_p1 2001:db8:2::2/128 2001:db8:2::3/128 +} + +spine_create() +{ + ip link set dev $spine_p1 up + ip link set dev $spine_p2 up + + __addr_add_del $spine_p1 add 2001:db8:1::1/64 + __addr_add_del $spine_p2 add 2001:db8:2::1/64 +} + +spine_destroy() +{ + __addr_add_del $spine_p2 del 2001:db8:2::1/64 + __addr_add_del $spine_p1 del 2001:db8:1::1/64 + + ip link set dev $spine_p2 down + ip link set dev $spine_p1 down +} + +ipv6_offload_check() +{ + local pfx="$1"; shift + local expected_num=$1; shift + local num + + # Try to avoid races with route offload + sleep .1 + + num=$(ip -6 route show match ${pfx} | grep "offload" | wc -l) + + if [ $num -eq $expected_num ]; then + return 0 + fi + + return 1 +} + +ipv6_route_add_prefix() +{ + RET=0 + + # Add a prefix route and check that it is offloaded. + ip -6 route add 2001:db8:3::/64 dev $spine_p1 metric 100 + ipv6_offload_check "2001:db8:3::/64 dev $spine_p1 metric 100" 1 + check_err $? "prefix route not offloaded" + + # Append an identical prefix route with an higher metric and check that + # offload indication did not change. + ip -6 route append 2001:db8:3::/64 dev $spine_p1 metric 200 + ipv6_offload_check "2001:db8:3::/64 dev $spine_p1 metric 100" 1 + check_err $? "lowest metric not offloaded after append" + ipv6_offload_check "2001:db8:3::/64 dev $spine_p1 metric 200" 0 + check_err $? "highest metric offloaded when should not" + + # Prepend an identical prefix route with lower metric and check that + # it is offloaded and the others are not. + ip -6 route append 2001:db8:3::/64 dev $spine_p1 metric 10 + ipv6_offload_check "2001:db8:3::/64 dev $spine_p1 metric 10" 1 + check_err $? "lowest metric not offloaded after prepend" + ipv6_offload_check "2001:db8:3::/64 dev $spine_p1 metric 100" 0 + check_err $? "mid metric offloaded when should not" + ipv6_offload_check "2001:db8:3::/64 dev $spine_p1 metric 200" 0 + check_err $? "highest metric offloaded when should not" + + # Delete the routes and add the same route with a different nexthop + # device. Check that it is offloaded. + ip -6 route flush 2001:db8:3::/64 dev $spine_p1 + ip -6 route add 2001:db8:3::/64 dev $spine_p2 + ipv6_offload_check "2001:db8:3::/64 dev $spine_p2" 1 + + log_test "IPv6 prefix route add" + + ip -6 route flush 2001:db8:3::/64 +} + +ipv6_route_add_mpath() +{ + RET=0 + + # Add a multipath route and check that it is offloaded. + ip -6 route add 2001:db8:3::/64 metric 100 \ + nexthop via 2001:db8:1::2 dev $spine_p1 \ + nexthop via 2001:db8:2::2 dev $spine_p2 + ipv6_offload_check "2001:db8:3::/64 metric 100" 2 + check_err $? "multipath route not offloaded when should" + + # Append another nexthop and check that it is offloaded as well. + ip -6 route append 2001:db8:3::/64 metric 100 \ + nexthop via 2001:db8:1::3 dev $spine_p1 + ipv6_offload_check "2001:db8:3::/64 metric 100" 3 + check_err $? "appended nexthop not offloaded when should" + + # Mimic route replace by removing the route and adding it back with + # only two nexthops. + ip -6 route del 2001:db8:3::/64 + ip -6 route add 2001:db8:3::/64 metric 100 \ + nexthop via 2001:db8:1::2 dev $spine_p1 \ + nexthop via 2001:db8:2::2 dev $spine_p2 + ipv6_offload_check "2001:db8:3::/64 metric 100" 2 + check_err $? "multipath route not offloaded after delete & add" + + # Append a nexthop with an higher metric and check that the offload + # indication did not change. + ip -6 route append 2001:db8:3::/64 metric 200 \ + nexthop via 2001:db8:1::3 dev $spine_p1 + ipv6_offload_check "2001:db8:3::/64 metric 100" 2 + check_err $? "lowest metric not offloaded after append" + ipv6_offload_check "2001:db8:3::/64 metric 200" 0 + check_err $? "highest metric offloaded when should not" + + # Prepend a nexthop with a lower metric and check that it is offloaded + # and the others are not. + ip -6 route append 2001:db8:3::/64 metric 10 \ + nexthop via 2001:db8:1::3 dev $spine_p1 + ipv6_offload_check "2001:db8:3::/64 metric 10" 1 + check_err $? "lowest metric not offloaded after prepend" + ipv6_offload_check "2001:db8:3::/64 metric 100" 0 + check_err $? "mid metric offloaded when should not" + ipv6_offload_check "2001:db8:3::/64 metric 200" 0 + check_err $? "highest metric offloaded when should not" + + log_test "IPv6 multipath route add" + + ip -6 route flush 2001:db8:3::/64 +} + +ipv6_route_add() +{ + ipv6_route_add_prefix + ipv6_route_add_mpath +} + +ipv6_route_replace() +{ + RET=0 + + # Replace prefix route with prefix route. + ip -6 route add 2001:db8:3::/64 metric 100 dev $spine_p1 + ipv6_offload_check "2001:db8:3::/64 metric 100" 1 + check_err $? "prefix route not offloaded when should" + ip -6 route replace 2001:db8:3::/64 metric 100 dev $spine_p2 + ipv6_offload_check "2001:db8:3::/64 metric 100" 1 + check_err $? "prefix route not offloaded after replace" + + # Replace prefix route with multipath route. + ip -6 route replace 2001:db8:3::/64 metric 100 \ + nexthop via 2001:db8:1::2 dev $spine_p1 \ + nexthop via 2001:db8:2::2 dev $spine_p2 + ipv6_offload_check "2001:db8:3::/64 metric 100" 2 + check_err $? "multipath route not offloaded after replace" + + # Replace multipath route with prefix route. A prefix route cannot + # replace a multipath route, so it is appended. + ip -6 route replace 2001:db8:3::/64 metric 100 dev $spine_p1 + ipv6_offload_check "2001:db8:3::/64 metric 100 dev $spine_p1" 0 + check_err $? "prefix route offloaded after 'replacing' multipath route" + ipv6_offload_check "2001:db8:3::/64 metric 100" 2 + check_err $? "multipath route not offloaded after being 'replaced' by prefix route" + + # Replace multipath route with multipath route. + ip -6 route replace 2001:db8:3::/64 metric 100 \ + nexthop via 2001:db8:1::3 dev $spine_p1 \ + nexthop via 2001:db8:2::3 dev $spine_p2 + ipv6_offload_check "2001:db8:3::/64 metric 100" 2 + check_err $? "multipath route not offloaded after replacing multipath route" + + # Replace a non-existing multipath route with a multipath route and + # check that it is appended and not offloaded. + ip -6 route replace 2001:db8:3::/64 metric 200 \ + nexthop via 2001:db8:1::3 dev $spine_p1 \ + nexthop via 2001:db8:2::3 dev $spine_p2 + ipv6_offload_check "2001:db8:3::/64 metric 100" 2 + check_err $? "multipath route not offloaded after non-existing route was 'replaced'" + ipv6_offload_check "2001:db8:3::/64 metric 200" 0 + check_err $? "multipath route offloaded after 'replacing' non-existing route" + + log_test "IPv6 route replace" + + ip -6 route flush 2001:db8:3::/64 +} + +ipv6_route_nexthop_group_share() +{ + RET=0 + + # The driver consolidates identical nexthop groups in order to reduce + # the resource usage in its adjacency table. Check that the deletion + # of one multipath route using the group does not affect the other. + ip -6 route add 2001:db8:3::/64 \ + nexthop via 2001:db8:1::2 dev $spine_p1 \ + nexthop via 2001:db8:2::2 dev $spine_p2 + ip -6 route add 2001:db8:4::/64 \ + nexthop via 2001:db8:1::2 dev $spine_p1 \ + nexthop via 2001:db8:2::2 dev $spine_p2 + ipv6_offload_check "2001:db8:3::/64" 2 + check_err $? "multipath route not offloaded when should" + ipv6_offload_check "2001:db8:4::/64" 2 + check_err $? "multipath route not offloaded when should" + ip -6 route del 2001:db8:3::/64 + ipv6_offload_check "2001:db8:4::/64" 2 + check_err $? "multipath route not offloaded after deletion of route sharing the nexthop group" + + # Check that after unsharing a nexthop group the routes are still + # marked as offloaded. + ip -6 route add 2001:db8:3::/64 \ + nexthop via 2001:db8:1::2 dev $spine_p1 \ + nexthop via 2001:db8:2::2 dev $spine_p2 + ip -6 route del 2001:db8:4::/64 \ + nexthop via 2001:db8:1::2 dev $spine_p1 + ipv6_offload_check "2001:db8:4::/64" 1 + check_err $? "singlepath route not offloaded after unsharing the nexthop group" + ipv6_offload_check "2001:db8:3::/64" 2 + check_err $? "multipath route not offloaded after unsharing the nexthop group" + + log_test "IPv6 nexthop group sharing" + + ip -6 route flush 2001:db8:3::/64 + ip -6 route flush 2001:db8:4::/64 +} + +ipv6_route_rate() +{ + local batch_dir=$(mktemp -d) + local num_rts=$((40 * 1024)) + local num_nhs=16 + local total + local start + local diff + local end + local nhs + local i + + RET=0 + + # Prepare 40K /64 multipath routes with 16 nexthops each and check how + # long it takes to add them. A limit of 60 seconds is set. It is much + # higher than insertion should take and meant to flag a serious + # regression. + total=$((nums_nhs * num_rts)) + + for i in $(seq 1 $num_nhs); do + ip -6 address add 2001:db8:1::10:$i/128 dev $tor1_p1 + nexthops+=" nexthop via 2001:db8:1::10:$i dev $spine_p1" + done + + for i in $(seq 1 $num_rts); do + echo "route add 2001:db8:8:$(printf "%x" $i)::/64$nexthops" \ + >> $batch_dir/add.batch + echo "route del 2001:db8:8:$(printf "%x" $i)::/64$nexthops" \ + >> $batch_dir/del.batch + done + + start=$(date +%s.%N) + + ip -batch $batch_dir/add.batch + count=$(ip -6 route show | grep offload | wc -l) + while [ $count -lt $total ]; do + sleep .01 + count=$(ip -6 route show | grep offload | wc -l) + done + + end=$(date +%s.%N) + + diff=$(echo "$end - $start" | bc -l) + test "$(echo "$diff > 60" | bc -l)" -eq 0 + check_err $? "route insertion took too long" + log_info "inserted $num_rts routes in $diff seconds" + + log_test "IPv6 routes insertion rate" + + ip -batch $batch_dir/del.batch + for i in $(seq 1 $num_nhs); do + ip -6 address del 2001:db8:1::10:$i/128 dev $tor1_p1 + done + rm -rf $batch_dir +} + +setup_prepare() +{ + spine_p1=${NETIFS[p1]} + tor1_p1=${NETIFS[p2]} + + spine_p2=${NETIFS[p3]} + tor2_p1=${NETIFS[p4]} + + vrf_prepare + forwarding_enable + + tor1_create + tor2_create + spine_create +} + +cleanup() +{ + pre_cleanup + + spine_destroy + tor2_destroy + tor1_destroy + + forwarding_restore + vrf_cleanup +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/hw_stats_l3.sh b/tools/testing/selftests/drivers/net/mlxsw/hw_stats_l3.sh new file mode 100755 index 000000000..941ba4c48 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/hw_stats_l3.sh @@ -0,0 +1,31 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + l3_monitor_test +" +NUM_NETIFS=0 +source $lib_dir/lib.sh + +swp=$NETIF_NO_CABLE + +cleanup() +{ + pre_cleanup +} + +l3_monitor_test() +{ + hw_stats_monitor_test $swp l3 \ + "ip addr add dev $swp 192.0.2.1/28" \ + "ip addr del dev $swp 192.0.2.1/28" +} + +trap cleanup EXIT + +setup_wait +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/ingress_rif_conf_1d.sh b/tools/testing/selftests/drivers/net/mlxsw/ingress_rif_conf_1d.sh new file mode 100755 index 000000000..df2b09966 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/ingress_rif_conf_1d.sh @@ -0,0 +1,264 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Test routing over bridge and verify that the order of configuration does not +# impact switch behavior. Verify that RIF is added correctly for existing +# mappings and that new mappings use the correct RIF. + +# +-------------------+ +--------------------+ +# | H1 | | H2 | +# | | | | +# | $h1.10 + | | + $h2.10 | +# | 192.0.2.1/28 | | | | 192.0.2.3/28 | +# | | | | | | +# | $h1 + | | + $h2 | +# +----------------|--+ +--|-----------------+ +# | | +# +----------------|-------------------------|-----------------+ +# | SW | | | +# | +--------------|-------------------------|---------------+ | +# | | $swp1 + + $swp2 | | +# | | | | | | +# | | $swp1.10 + + $swp2.10 | | +# | | | | +# | | br0 | | +# | | 192.0.2.2/28 | | +# | +--------------------------------------------------------+ | +# | | +# | $swp3.10 + | +# | 192.0.2.17/28 | | +# | | | +# | $swp3 + | +# +---------------|--------------------------------------------+ +# | +# +---------------|--+ +# | $h3 + | +# | | | +# | $h3.10 + | +# | 192.0.2.18/28 | +# | | +# | H3 | +# +------------------+ + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + port_vid_map_rif + rif_port_vid_map +" + +NUM_NETIFS=6 +source $lib_dir/lib.sh +source $lib_dir/tc_common.sh +source $lib_dir/devlink_lib.sh + +h1_create() +{ + simple_if_init $h1 + vlan_create $h1 10 v$h1 192.0.2.1/28 + + ip route add 192.0.2.16/28 vrf v$h1 nexthop via 192.0.2.2 +} + +h1_destroy() +{ + ip route del 192.0.2.16/28 vrf v$h1 nexthop via 192.0.2.2 + + vlan_destroy $h1 10 + simple_if_fini $h1 +} + +h2_create() +{ + simple_if_init $h2 + vlan_create $h2 10 v$h2 192.0.2.3/28 +} + +h2_destroy() +{ + vlan_destroy $h2 10 + simple_if_fini $h2 +} + +h3_create() +{ + simple_if_init $h3 + vlan_create $h3 10 v$h3 192.0.2.18/28 + + ip route add 192.0.2.0/28 vrf v$h3 nexthop via 192.0.2.17 +} + +h3_destroy() +{ + ip route del 192.0.2.0/28 vrf v$h3 nexthop via 192.0.2.17 + + vlan_destroy $h3 10 + simple_if_fini $h3 +} + +switch_create() +{ + ip link set dev $swp1 up + + ip link add dev br0 type bridge mcast_snooping 0 + + # By default, a link-local address is generated when netdevice becomes + # up. Adding an address to the bridge will cause creating a RIF for it. + # Prevent generating link-local address to be able to control when the + # RIF is added. + sysctl_set net.ipv6.conf.br0.addr_gen_mode 1 + ip link set dev br0 up + + ip link set dev $swp2 up + vlan_create $swp2 10 + ip link set dev $swp2.10 master br0 + + ip link set dev $swp3 up + vlan_create $swp3 10 "" 192.0.2.17/28 + tc qdisc add dev $swp3 clsact + + # Replace neighbor to avoid 1 packet which is forwarded in software due + # to "unresolved neigh". + ip neigh replace dev $swp3.10 192.0.2.18 lladdr $(mac_get $h3.10) +} + +switch_destroy() +{ + tc qdisc del dev $swp3 clsact + vlan_destroy $swp3 10 + ip link set dev $swp3 down + + ip link set dev $swp2.10 nomaster + vlan_destroy $swp2 10 + ip link set dev $swp2 down + + ip link set dev br0 down + sysctl_restore net.ipv6.conf.br0.addr_gen_mode + ip link del dev br0 + + ip link set dev $swp1 down +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + swp3=${NETIFS[p5]} + h3=${NETIFS[p6]} + + vrf_prepare + forwarding_enable + + h1_create + h2_create + h3_create + + switch_create +} + +cleanup() +{ + pre_cleanup + + switch_destroy + + h3_destroy + h2_destroy + h1_destroy + + forwarding_restore + vrf_cleanup +} + +bridge_rif_add() +{ + rifs_occ_t0=$(devlink_resource_occ_get rifs) + __addr_add_del br0 add 192.0.2.2/28 + rifs_occ_t1=$(devlink_resource_occ_get rifs) + + expected_rifs=$((rifs_occ_t0 + 1)) + + [[ $expected_rifs -eq $rifs_occ_t1 ]] + check_err $? "Expected $expected_rifs RIFs, $rifs_occ_t1 are used" + + sleep 1 +} + +bridge_rif_del() +{ + __addr_add_del br0 del 192.0.2.2/28 +} + +port_vid_map_rif() +{ + RET=0 + + # First add {port, VID}->FID for $swp1.10, then add a RIF and verify + # that packets can be routed via the existing mapping. + vlan_create $swp1 10 + ip link set dev $swp1.10 master br0 + bridge_rif_add + + # The hardware matches on the first ethertype which is not VLAN, + # so the protocol should be IP. + tc filter add dev $swp3 egress protocol ip pref 1 handle 101 \ + flower skip_sw dst_ip 192.0.2.18 action pass + + ping_do $h1.10 192.0.2.18 + check_err $? "Ping failed" + + tc_check_at_least_x_packets "dev $swp3 egress" 101 10 + check_err $? "Packets were not routed in hardware" + + log_test "Add RIF for existing {port, VID}->FID mapping" + + tc filter del dev $swp3 egress + + bridge_rif_del + ip link set dev $swp1.10 nomaster + vlan_destroy $swp1 10 +} + +rif_port_vid_map() +{ + RET=0 + + # First add an address to the bridge, which will create a RIF on top of + # it, then add a new {port, VID}->FID mapping and verify that packets + # can be routed via the new mapping. + bridge_rif_add + vlan_create $swp1 10 + ip link set dev $swp1.10 master br0 + + # The hardware matches on the first ethertype which is not VLAN, + # so the protocol should be IP. + tc filter add dev $swp3 egress protocol ip pref 1 handle 101 \ + flower skip_sw dst_ip 192.0.2.18 action pass + + ping_do $h1.10 192.0.2.18 + check_err $? "Ping failed" + + tc_check_at_least_x_packets "dev $swp3 egress" 101 10 + check_err $? "Packets were not routed in hardware" + + log_test "Add {port, VID}->FID mapping for FID with a RIF" + + tc filter del dev $swp3 egress + + ip link set dev $swp1.10 nomaster + vlan_destroy $swp1 10 + bridge_rif_del +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/ingress_rif_conf_1q.sh b/tools/testing/selftests/drivers/net/mlxsw/ingress_rif_conf_1q.sh new file mode 100755 index 000000000..577293bab --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/ingress_rif_conf_1q.sh @@ -0,0 +1,264 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Test routing over bridge and verify that the order of configuration does not +# impact switch behavior. Verify that RIF is added correctly for existing +# mapping and that packets can be routed via port which is added after the FID +# already has a RIF. + +# +-------------------+ +--------------------+ +# | H1 | | H2 | +# | | | | +# | $h1.10 + | | + $h2.10 | +# | 192.0.2.1/28 | | | | 192.0.2.3/28 | +# | | | | | | +# | $h1 + | | + $h2 | +# +----------------|--+ +--|-----------------+ +# | | +# +----------------|-------------------------|-----------------+ +# | SW | | | +# | +--------------|-------------------------|---------------+ | +# | | $swp1 + + $swp2 | | +# | | | | +# | | br0 | | +# | +--------------------------------------------------------+ | +# | | | +# | br0.10 | +# | 192.0.2.2/28 | +# | | +# | | +# | $swp3 + | +# | 192.0.2.17/28 | | +# +----------------|-------------------------------------------+ +# | +# +----------------|--+ +# | $h3 + | +# | 192.0.2.18/28 | +# | | +# | H3 | +# +-------------------+ + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + vid_map_rif + rif_vid_map +" + +NUM_NETIFS=6 +source $lib_dir/lib.sh +source $lib_dir/tc_common.sh +source $lib_dir/devlink_lib.sh + +h1_create() +{ + simple_if_init $h1 + vlan_create $h1 10 v$h1 192.0.2.1/28 + + ip route add 192.0.2.16/28 vrf v$h1 nexthop via 192.0.2.2 +} + +h1_destroy() +{ + ip route del 192.0.2.16/28 vrf v$h1 nexthop via 192.0.2.2 + + vlan_destroy $h1 10 + simple_if_fini $h1 +} + +h2_create() +{ + simple_if_init $h2 + vlan_create $h2 10 v$h2 192.0.2.3/28 +} + +h2_destroy() +{ + vlan_destroy $h2 10 + simple_if_fini $h2 +} + +h3_create() +{ + simple_if_init $h3 192.0.2.18/28 + ip route add 192.0.2.0/28 vrf v$h3 nexthop via 192.0.2.17 +} + +h3_destroy() +{ + ip route del 192.0.2.0/28 vrf v$h3 nexthop via 192.0.2.17 + simple_if_fini $h3 192.0.2.18/28 +} + +switch_create() +{ + ip link set dev $swp1 up + + ip link add dev br0 type bridge vlan_filtering 1 mcast_snooping 0 + + # By default, a link-local address is generated when netdevice becomes + # up. Adding an address to the bridge will cause creating a RIF for it. + # Prevent generating link-local address to be able to control when the + # RIF is added. + sysctl_set net.ipv6.conf.br0.addr_gen_mode 1 + ip link set dev br0 up + + ip link set dev $swp2 up + ip link set dev $swp2 master br0 + bridge vlan add vid 10 dev $swp2 + + ip link set dev $swp3 up + __addr_add_del $swp3 add 192.0.2.17/28 + tc qdisc add dev $swp3 clsact + + # Replace neighbor to avoid 1 packet which is forwarded in software due + # to "unresolved neigh". + ip neigh replace dev $swp3 192.0.2.18 lladdr $(mac_get $h3) +} + +switch_destroy() +{ + tc qdisc del dev $swp3 clsact + __addr_add_del $swp3 del 192.0.2.17/28 + ip link set dev $swp3 down + + bridge vlan del vid 10 dev $swp2 + ip link set dev $swp2 nomaster + ip link set dev $swp2 down + + ip link set dev br0 down + sysctl_restore net.ipv6.conf.br0.addr_gen_mode + ip link del dev br0 + + ip link set dev $swp1 down +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + swp3=${NETIFS[p5]} + h3=${NETIFS[p6]} + + vrf_prepare + forwarding_enable + + h1_create + h2_create + h3_create + + switch_create +} + +cleanup() +{ + pre_cleanup + + switch_destroy + + h3_destroy + h2_destroy + h1_destroy + + forwarding_restore + vrf_cleanup +} + +bridge_rif_add() +{ + rifs_occ_t0=$(devlink_resource_occ_get rifs) + vlan_create br0 10 "" 192.0.2.2/28 + rifs_occ_t1=$(devlink_resource_occ_get rifs) + + expected_rifs=$((rifs_occ_t0 + 1)) + + [[ $expected_rifs -eq $rifs_occ_t1 ]] + check_err $? "Expected $expected_rifs RIFs, $rifs_occ_t1 are used" + + sleep 1 +} + +bridge_rif_del() +{ + vlan_destroy br0 10 +} + +vid_map_rif() +{ + RET=0 + + # First add VID->FID for vlan 10, then add a RIF and verify that + # packets can be routed via the existing mapping. + bridge vlan add vid 10 dev br0 self + ip link set dev $swp1 master br0 + bridge vlan add vid 10 dev $swp1 + + bridge_rif_add + + tc filter add dev $swp3 egress protocol ip pref 1 handle 101 \ + flower skip_sw dst_ip 192.0.2.18 action pass + + ping_do $h1.10 192.0.2.18 + check_err $? "Ping failed" + + tc_check_at_least_x_packets "dev $swp3 egress" 101 10 + check_err $? "Packets were not routed in hardware" + + log_test "Add RIF for existing VID->FID mapping" + + tc filter del dev $swp3 egress + + bridge_rif_del + + bridge vlan del vid 10 dev $swp1 + ip link set dev $swp1 nomaster + bridge vlan del vid 10 dev br0 self +} + +rif_vid_map() +{ + RET=0 + + # Using 802.1Q, there is only one VID->FID map for each VID. That means + # that we cannot really check adding a new map for existing FID with a + # RIF. Verify that packets can be routed via port which is added after + # the FID already has a RIF, although in practice there is no new + # mapping in the hardware. + bridge vlan add vid 10 dev br0 self + bridge_rif_add + + ip link set dev $swp1 master br0 + bridge vlan add vid 10 dev $swp1 + + tc filter add dev $swp3 egress protocol ip pref 1 handle 101 \ + flower skip_sw dst_ip 192.0.2.18 action pass + + ping_do $h1.10 192.0.2.18 + check_err $? "Ping failed" + + tc_check_at_least_x_packets "dev $swp3 egress" 101 10 + check_err $? "Packets were not routed in hardware" + + log_test "Add port to VID->FID mapping for FID with a RIF" + + tc filter del dev $swp3 egress + + bridge vlan del vid 10 dev $swp1 + ip link set dev $swp1 nomaster + + bridge_rif_del + bridge vlan del vid 10 dev br0 self +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/ingress_rif_conf_vxlan.sh b/tools/testing/selftests/drivers/net/mlxsw/ingress_rif_conf_vxlan.sh new file mode 100755 index 000000000..90450216a --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/ingress_rif_conf_vxlan.sh @@ -0,0 +1,311 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Test routing after VXLAN decapsulation and verify that the order of +# configuration does not impact switch behavior. Verify that RIF is added +# correctly for existing mapping and that new mapping uses the correct RIF. + +# +---------------------------+ +# | H1 | +# | + $h1 | +# | | 192.0.2.1/28 | +# +----|----------------------+ +# | +# +----|----------------------------------------------------------------------+ +# | SW | | +# | +--|--------------------------------------------------------------------+ | +# | | + $swp1 br1 | | +# | | vid 10 pvid untagged | | +# | | | | +# | | | | +# | | + vx4001 | | +# | | local 192.0.2.17 | | +# | | remote 192.0.2.18 | | +# | | id 104001 | | +# | | dstport $VXPORT | | +# | | vid 4001 pvid untagged | | +# | | | | +# | +----------------------------------+------------------------------------+ | +# | | | +# | +----------------------------------|------------------------------------+ | +# | | | | | +# | | +-------------------------------+---------------------------------+ | | +# | | | | | | +# | | + vlan10 vlan4001 + | | +# | | 192.0.2.2/28 | | +# | | | | +# | | vrf-green | | +# | +-----------------------------------------------------------------------+ | +# | | +# | + $rp1 +lo | +# | | 198.51.100.1/24 192.0.2.17/32 | +# +----|----------------------------------------------------------------------+ +# | +# +----|--------------------------------------------------------+ +# | | v$rp2 | +# | + $rp2 | +# | 198.51.100.2/24 | +# | | +# +-------------------------------------------------------------+ + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + vni_fid_map_rif + rif_vni_fid_map +" + +NUM_NETIFS=4 +source $lib_dir/lib.sh +source $lib_dir/tc_common.sh +source $lib_dir/devlink_lib.sh + +: ${VXPORT:=4789} +export VXPORT + +h1_create() +{ + simple_if_init $h1 192.0.2.1/28 +} + +h1_destroy() +{ + simple_if_fini $h1 192.0.2.1/28 +} + +switch_create() +{ + ip link add name br1 type bridge vlan_filtering 1 vlan_default_pvid 0 \ + mcast_snooping 0 + # Make sure the bridge uses the MAC address of the local port and not + # that of the VxLAN's device. + ip link set dev br1 address $(mac_get $swp1) + ip link set dev br1 up + + ip link set dev $rp1 up + ip address add dev $rp1 198.51.100.1/24 + + ip link set dev $swp1 master br1 + ip link set dev $swp1 up + bridge vlan add vid 10 dev $swp1 pvid untagged + + tc qdisc add dev $swp1 clsact + + ip link add name vx4001 type vxlan id 104001 \ + local 192.0.2.17 dstport $VXPORT \ + nolearning noudpcsum tos inherit ttl 100 + ip link set dev vx4001 up + + ip link set dev vx4001 master br1 + + ip address add 192.0.2.17/32 dev lo + + # Create SVIs. + vrf_create "vrf-green" + ip link set dev vrf-green up + + ip link add link br1 name vlan10 up master vrf-green type vlan id 10 + + # Replace neighbor to avoid 1 packet which is forwarded in software due + # to "unresolved neigh". + ip neigh replace dev vlan10 192.0.2.1 lladdr $(mac_get $h1) + + ip address add 192.0.2.2/28 dev vlan10 + + bridge vlan add vid 10 dev br1 self + bridge vlan add vid 4001 dev br1 self + + sysctl_set net.ipv4.conf.all.rp_filter 0 +} + +switch_destroy() +{ + sysctl_restore net.ipv4.conf.all.rp_filter + + bridge vlan del vid 4001 dev br1 self + bridge vlan del vid 10 dev br1 self + + ip link del dev vlan10 + + vrf_destroy "vrf-green" + + ip address del 192.0.2.17/32 dev lo + + tc qdisc del dev $swp1 clsact + + bridge vlan del vid 10 dev $swp1 + ip link set dev $swp1 down + ip link set dev $swp1 nomaster + + ip link set dev vx4001 nomaster + + ip link set dev vx4001 down + ip link del dev vx4001 + + ip address del dev $rp1 198.51.100.1/24 + ip link set dev $rp1 down + + ip link set dev br1 down + ip link del dev br1 +} + +vrp2_create() +{ + simple_if_init $rp2 198.51.100.2/24 + + ip route add 192.0.2.17/32 vrf v$rp2 nexthop via 198.51.100.1 +} + +vrp2_destroy() +{ + ip route del 192.0.2.17/32 vrf v$rp2 nexthop via 198.51.100.1 + + simple_if_fini $rp2 198.51.100.2/24 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + rp1=${NETIFS[p3]} + rp2=${NETIFS[p4]} + + vrf_prepare + forwarding_enable + + h1_create + switch_create + + vrp2_create +} + +cleanup() +{ + pre_cleanup + + vrp2_destroy + + switch_destroy + h1_destroy + + forwarding_restore + vrf_cleanup +} + +payload_get() +{ + local dest_mac=$(mac_get vlan4001) + local src_mac=$(mac_get $rp1) + + p=$(: + )"08:"$( : VXLAN flags + )"00:00:00:"$( : VXLAN reserved + )"01:96:41:"$( : VXLAN VNI : 104001 + )"00:"$( : VXLAN reserved + )"$dest_mac:"$( : ETH daddr + )"$src_mac:"$( : ETH saddr + )"08:00:"$( : ETH type + )"45:"$( : IP version + IHL + )"00:"$( : IP TOS + )"00:54:"$( : IP total length + )"3f:49:"$( : IP identification + )"00:00:"$( : IP flags + frag off + )"3f:"$( : IP TTL + )"01:"$( : IP proto + )"50:21:"$( : IP header csum + )"c6:33:64:0a:"$( : IP saddr: 198.51.100.10 + )"c0:00:02:01:"$( : IP daddr: 192.0.2.1 + ) + echo $p +} + +vlan_rif_add() +{ + rifs_occ_t0=$(devlink_resource_occ_get rifs) + + ip link add link br1 name vlan4001 up master vrf-green \ + type vlan id 4001 + + rifs_occ_t1=$(devlink_resource_occ_get rifs) + expected_rifs=$((rifs_occ_t0 + 1)) + + [[ $expected_rifs -eq $rifs_occ_t1 ]] + check_err $? "Expected $expected_rifs RIFs, $rifs_occ_t1 are used" +} + +vlan_rif_del() +{ + ip link del dev vlan4001 +} + +vni_fid_map_rif() +{ + local rp1_mac=$(mac_get $rp1) + + RET=0 + + # First add VNI->FID mapping to the FID of VLAN 4001 + bridge vlan add vid 4001 dev vx4001 pvid untagged + + # Add a RIF to the FID with VNI->FID mapping + vlan_rif_add + + tc filter add dev $swp1 egress protocol ip pref 1 handle 101 \ + flower skip_sw dst_ip 192.0.2.1 action pass + + payload=$(payload_get) + ip vrf exec v$rp2 $MZ $rp2 -c 10 -d 1msec -b $rp1_mac \ + -B 192.0.2.17 -A 192.0.2.18 \ + -t udp sp=12345,dp=$VXPORT,p=$payload -q + + tc_check_at_least_x_packets "dev $swp1 egress" 101 10 + check_err $? "Packets were not routed in hardware" + + log_test "Add RIF for existing VNI->FID mapping" + + tc filter del dev $swp1 egress + + bridge vlan del vid 4001 dev vx4001 pvid untagged + vlan_rif_del +} + +rif_vni_fid_map() +{ + local rp1_mac=$(mac_get $rp1) + + RET=0 + + # First add a RIF to the FID of VLAN 4001 + vlan_rif_add + + # Add VNI->FID mapping to FID with a RIF + bridge vlan add vid 4001 dev vx4001 pvid untagged + + tc filter add dev $swp1 egress protocol ip pref 1 handle 101 \ + flower skip_sw dst_ip 192.0.2.1 action pass + + payload=$(payload_get) + ip vrf exec v$rp2 $MZ $rp2 -c 10 -d 1msec -b $rp1_mac \ + -B 192.0.2.17 -A 192.0.2.18 \ + -t udp sp=12345,dp=$VXPORT,p=$payload -q + + tc_check_at_least_x_packets "dev $swp1 egress" 101 10 + check_err $? "Packets were not routed in hardware" + + log_test "Add VNI->FID mapping for FID with a RIF" + + tc filter del dev $swp1 egress + + bridge vlan del vid 4001 dev vx4001 pvid untagged + vlan_rif_del +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/mirror_gre.sh b/tools/testing/selftests/drivers/net/mlxsw/mirror_gre.sh new file mode 100755 index 000000000..76f1ab489 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/mirror_gre.sh @@ -0,0 +1,217 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# This test uses standard topology for testing gretap. See +# ../../../net/forwarding/mirror_gre_topo_lib.sh for more details. +# +# Test offloading various features of offloading gretap mirrors specific to +# mlxsw. + +lib_dir=$(dirname $0)/../../../net/forwarding + +NUM_NETIFS=6 +source $lib_dir/lib.sh +source $lib_dir/mirror_lib.sh +source $lib_dir/mirror_gre_lib.sh +source $lib_dir/mirror_gre_topo_lib.sh + +setup_keyful() +{ + tunnel_create gt6-key ip6gretap 2001:db8:3::1 2001:db8:3::2 \ + ttl 100 tos inherit allow-localremote \ + key 1234 + + tunnel_create h3-gt6-key ip6gretap 2001:db8:3::2 2001:db8:3::1 \ + key 1234 + ip link set h3-gt6-key vrf v$h3 + matchall_sink_create h3-gt6-key + + ip address add dev $swp3 2001:db8:3::1/64 + ip address add dev $h3 2001:db8:3::2/64 +} + +cleanup_keyful() +{ + ip address del dev $h3 2001:db8:3::2/64 + ip address del dev $swp3 2001:db8:3::1/64 + + tunnel_destroy h3-gt6-key + tunnel_destroy gt6-key +} + +setup_soft() +{ + # Set up a topology for testing underlay routes that point at an + # unsupported soft device. + + tunnel_create gt6-soft ip6gretap 2001:db8:4::1 2001:db8:4::2 \ + ttl 100 tos inherit allow-localremote + + tunnel_create h3-gt6-soft ip6gretap 2001:db8:4::2 2001:db8:4::1 + ip link set h3-gt6-soft vrf v$h3 + matchall_sink_create h3-gt6-soft + + ip link add name v1 type veth peer name v2 + ip link set dev v1 up + ip address add dev v1 2001:db8:4::1/64 + + ip link set dev v2 vrf v$h3 + ip link set dev v2 up + ip address add dev v2 2001:db8:4::2/64 +} + +cleanup_soft() +{ + ip link del dev v1 + + tunnel_destroy h3-gt6-soft + tunnel_destroy gt6-soft +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + swp3=${NETIFS[p5]} + h3=${NETIFS[p6]} + + vrf_prepare + mirror_gre_topo_create + + ip address add dev $swp3 2001:db8:2::1/64 + ip address add dev $h3 2001:db8:2::2/64 + + ip address add dev $swp3 192.0.2.129/28 + ip address add dev $h3 192.0.2.130/28 + + setup_keyful + setup_soft +} + +cleanup() +{ + pre_cleanup + + cleanup_soft + cleanup_keyful + + ip address del dev $h3 2001:db8:2::2/64 + ip address del dev $swp3 2001:db8:2::1/64 + + ip address del dev $h3 192.0.2.130/28 + ip address del dev $swp3 192.0.2.129/28 + + mirror_gre_topo_destroy + vrf_cleanup +} + +test_span_gre_ttl_inherit() +{ + local tundev=$1; shift + local type=$1; shift + local what=$1; shift + + RET=0 + + ip link set dev $tundev type $type ttl inherit + mirror_install $swp1 ingress $tundev "matchall $tcflags" + fail_test_span_gre_dir $tundev ingress + + ip link set dev $tundev type $type ttl 100 + + quick_test_span_gre_dir $tundev ingress + mirror_uninstall $swp1 ingress + + log_test "$what: no offload on TTL of inherit ($tcflags)" +} + +test_span_gre_tos_fixed() +{ + local tundev=$1; shift + local type=$1; shift + local what=$1; shift + + RET=0 + + ip link set dev $tundev type $type tos 0x10 + mirror_install $swp1 ingress $tundev "matchall $tcflags" + fail_test_span_gre_dir $tundev ingress + + ip link set dev $tundev type $type tos inherit + quick_test_span_gre_dir $tundev ingress + mirror_uninstall $swp1 ingress + + log_test "$what: no offload on a fixed TOS ($tcflags)" +} + +test_span_failable() +{ + local should_fail=$1; shift + local tundev=$1; shift + local what=$1; shift + + RET=0 + + mirror_install $swp1 ingress $tundev "matchall $tcflags" + if ((should_fail)); then + fail_test_span_gre_dir $tundev ingress + else + quick_test_span_gre_dir $tundev ingress + fi + mirror_uninstall $swp1 ingress + + log_test "$what: should_fail=$should_fail ($tcflags)" +} + +test_failable() +{ + local should_fail=$1; shift + + test_span_failable $should_fail gt6-key "mirror to keyful gretap" + test_span_failable $should_fail gt6-soft "mirror to gretap w/ soft underlay" +} + +test_sw() +{ + slow_path_trap_install $swp1 ingress + slow_path_trap_install $swp1 egress + + test_failable 0 + + slow_path_trap_uninstall $swp1 egress + slow_path_trap_uninstall $swp1 ingress +} + +test_hw() +{ + test_failable 1 + + test_span_gre_tos_fixed gt4 gretap "mirror to gretap" + test_span_gre_tos_fixed gt6 ip6gretap "mirror to ip6gretap" + + test_span_gre_ttl_inherit gt4 gretap "mirror to gretap" + test_span_gre_ttl_inherit gt6 ip6gretap "mirror to ip6gretap" +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +if ! tc_offload_check; then + check_err 1 "Could not test offloaded functionality" + log_test "mlxsw-specific tests for mirror to gretap" + exit +fi + +tcflags="skip_hw" +test_sw + +tcflags="skip_sw" +test_hw + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/mirror_gre_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/mirror_gre_scale.sh new file mode 100644 index 000000000..e00435753 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/mirror_gre_scale.sh @@ -0,0 +1,198 @@ +# SPDX-License-Identifier: GPL-2.0 + +# Test offloading a number of mirrors-to-gretap. The test creates a number of +# tunnels. Then it adds one flower mirror for each of the tunnels, matching a +# given host IP. Then it generates traffic at each of the host IPs and checks +# that the traffic has been mirrored at the appropriate tunnel. +# +# +--------------------------+ +--------------------------+ +# | H1 | | H2 | +# | + $h1 | | $h2 + | +# | | 2001:db8:1:X::1/64 | | 2001:db8:1:X::2/64 | | +# +-----|--------------------+ +--------------------|-----+ +# | | +# +-----|-------------------------------------------------------------|-----+ +# | SW o--> mirrors | | +# | +---|-------------------------------------------------------------|---+ | +# | | + $swp1 BR $swp2 + | | +# | +---------------------------------------------------------------------+ | +# | | +# | + $swp3 + gt6-<X> (ip6gretap) | +# | | 2001:db8:2:X::1/64 : loc=2001:db8:2:X::1 | +# | | : rem=2001:db8:2:X::2 | +# | | : ttl=100 | +# | | : tos=inherit | +# | | : | +# +-----|--------------------------------:----------------------------------+ +# | : +# +-----|--------------------------------:----------------------------------+ +# | H3 + $h3 + h3-gt6-<X> (ip6gretap) | +# | 2001:db8:2:X::2/64 loc=2001:db8:2:X::2 | +# | rem=2001:db8:2:X::1 | +# | ttl=100 | +# | tos=inherit | +# | | +# +-------------------------------------------------------------------------+ + +source ../../../../net/forwarding/mirror_lib.sh + +MIRROR_NUM_NETIFS=6 + +mirror_gre_ipv6_addr() +{ + local net=$1; shift + local num=$1; shift + + printf "2001:db8:%x:%x" $net $num +} + +mirror_gre_tunnels_create() +{ + local count=$1; shift + local should_fail=$1; shift + + MIRROR_GRE_BATCH_FILE="$(mktemp)" + for ((i=0; i < count; ++i)); do + local match_dip=$(mirror_gre_ipv6_addr 1 $i)::2 + local htun=h3-gt6-$i + local tun=gt6-$i + + ((mirror_gre_tunnels++)) + + ip address add dev $h1 $(mirror_gre_ipv6_addr 1 $i)::1/64 + ip address add dev $h2 $(mirror_gre_ipv6_addr 1 $i)::2/64 + + ip address add dev $swp3 $(mirror_gre_ipv6_addr 2 $i)::1/64 + ip address add dev $h3 $(mirror_gre_ipv6_addr 2 $i)::2/64 + + tunnel_create $tun ip6gretap \ + $(mirror_gre_ipv6_addr 2 $i)::1 \ + $(mirror_gre_ipv6_addr 2 $i)::2 \ + ttl 100 tos inherit allow-localremote + + tunnel_create $htun ip6gretap \ + $(mirror_gre_ipv6_addr 2 $i)::2 \ + $(mirror_gre_ipv6_addr 2 $i)::1 + ip link set $htun vrf v$h3 + matchall_sink_create $htun + + cat >> $MIRROR_GRE_BATCH_FILE <<-EOF + filter add dev $swp1 ingress pref 1000 \ + protocol ipv6 \ + flower $tcflags dst_ip $match_dip \ + action mirred egress mirror dev $tun + EOF + done + + tc -b $MIRROR_GRE_BATCH_FILE + check_err_fail $should_fail $? "Mirror rule insertion" +} + +mirror_gre_tunnels_destroy() +{ + local count=$1; shift + + for ((i=0; i < count; ++i)); do + local htun=h3-gt6-$i + local tun=gt6-$i + + ip address del dev $h3 $(mirror_gre_ipv6_addr 2 $i)::2/64 + ip address del dev $swp3 $(mirror_gre_ipv6_addr 2 $i)::1/64 + + ip address del dev $h2 $(mirror_gre_ipv6_addr 1 $i)::2/64 + ip address del dev $h1 $(mirror_gre_ipv6_addr 1 $i)::1/64 + + tunnel_destroy $htun + tunnel_destroy $tun + done +} + +__mirror_gre_test() +{ + local count=$1; shift + local should_fail=$1; shift + + mirror_gre_tunnels_create $count $should_fail + if ((should_fail)); then + return + fi + + sleep 5 + + for ((i = 0; i < count; ++i)); do + local sip=$(mirror_gre_ipv6_addr 1 $i)::1 + local dip=$(mirror_gre_ipv6_addr 1 $i)::2 + local htun=h3-gt6-$i + local message + + icmp6_capture_install $htun + mirror_test v$h1 $sip $dip $htun 100 10 + icmp6_capture_uninstall $htun + done +} + +mirror_gre_test() +{ + local count=$1; shift + local should_fail=$1; shift + + if ! tc_offload_check $TC_FLOWER_NUM_NETIFS; then + check_err 1 "Could not test offloaded functionality" + return + fi + + tcflags="skip_sw" + __mirror_gre_test $count $should_fail +} + +mirror_gre_setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + swp3=${NETIFS[p5]} + h3=${NETIFS[p6]} + + mirror_gre_tunnels=0 + + vrf_prepare + + simple_if_init $h1 + simple_if_init $h2 + simple_if_init $h3 + + ip link add name br1 type bridge vlan_filtering 1 + ip link set dev br1 up + + ip link set dev $swp1 master br1 + ip link set dev $swp1 up + tc qdisc add dev $swp1 clsact + + ip link set dev $swp2 master br1 + ip link set dev $swp2 up + + ip link set dev $swp3 up +} + +mirror_gre_cleanup() +{ + mirror_gre_tunnels_destroy $mirror_gre_tunnels + + ip link set dev $swp3 down + + ip link set dev $swp2 down + + tc qdisc del dev $swp1 clsact + ip link set dev $swp1 down + + ip link del dev br1 + + simple_if_fini $h3 + simple_if_fini $h2 + simple_if_fini $h1 + + vrf_cleanup +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/mlxsw_lib.sh b/tools/testing/selftests/drivers/net/mlxsw/mlxsw_lib.sh new file mode 100644 index 000000000..6369927e9 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/mlxsw_lib.sh @@ -0,0 +1,77 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +############################################################################## +# Defines + +if [[ ! -v MLXSW_CHIP ]]; then + MLXSW_CHIP=$(devlink -j dev info $DEVLINK_DEV | jq -r '.[][]["driver"]') + if [ -z "$MLXSW_CHIP" ]; then + echo "SKIP: Device $DEVLINK_DEV doesn't support devlink info command" + exit 1 + fi +fi + +MLXSW_SPECTRUM_REV=$(case $MLXSW_CHIP in + mlxsw_spectrum) + echo 1 ;; + mlxsw_spectrum*) + echo ${MLXSW_CHIP#mlxsw_spectrum} ;; + *) + echo "Couldn't determine Spectrum chip revision." \ + > /dev/stderr ;; + esac) + +mlxsw_on_spectrum() +{ + local rev=$1; shift + local op="==" + local rev2=${rev%+} + + if [[ $rev2 != $rev ]]; then + op=">=" + fi + + ((MLXSW_SPECTRUM_REV $op rev2)) +} + +__mlxsw_only_on_spectrum() +{ + local rev=$1; shift + local caller=$1; shift + local src=$1; shift + + if ! mlxsw_on_spectrum "$rev"; then + log_test_skip $src:$caller "(Spectrum-$rev only)" + return 1 + fi +} + +mlxsw_only_on_spectrum() +{ + local caller=${FUNCNAME[1]} + local src=${BASH_SOURCE[1]} + local rev + + for rev in "$@"; do + if __mlxsw_only_on_spectrum "$rev" "$caller" "$src"; then + return 0 + fi + done + + return 1 +} + +mlxsw_max_descriptors_get() +{ + local spectrum_rev=$MLXSW_SPECTRUM_REV + + case $spectrum_rev in + 1) echo 81920 ;; + 2) echo 136960 ;; + 3) echo 204800 ;; + 4) echo 220000 ;; + *) echo "Unknown max descriptors for chip revision." > /dev/stderr + return 1 ;; + esac +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/one_armed_router.sh b/tools/testing/selftests/drivers/net/mlxsw/one_armed_router.sh new file mode 100755 index 000000000..f02d83e94 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/one_armed_router.sh @@ -0,0 +1,259 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test a "one-armed router" [1] scenario. Packets forwarded between H1 and H2 +# should be forwarded by the ASIC, but also trapped so that ICMP redirect +# packets could be potentially generated. +# +# 1. https://en.wikipedia.org/wiki/One-armed_router +# +# +---------------------------------+ +# | H1 (vrf) | +# | + $h1 | +# | | 192.0.2.1/24 | +# | | 2001:db8:1::1/64 | +# | | | +# | | default via 192.0.2.2 | +# | | default via 2001:db8:1::2 | +# +----|----------------------------+ +# | +# +----|----------------------------------------------------------------------+ +# | SW | | +# | +--|--------------------------------------------------------------------+ | +# | | + $swp1 BR0 (802.1d) | | +# | | | | +# | | 192.0.2.2/24 | | +# | | 2001:db8:1::2/64 | | +# | | 198.51.100.2/24 | | +# | | 2001:db8:2::2/64 | | +# | | | | +# | | + $swp2 | | +# | +--|--------------------------------------------------------------------+ | +# | | | +# +----|----------------------------------------------------------------------+ +# | +# +----|----------------------------+ +# | | default via 198.51.100.2 | +# | | default via 2001:db8:2::2 | +# | | | +# | | 2001:db8:2::1/64 | +# | | 198.51.100.1/24 | +# | + $h2 | +# | H2 (vrf) | +# +---------------------------------+ + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS="ping_ipv4 ping_ipv6 fwd_mark_ipv4 fwd_mark_ipv6" +NUM_NETIFS=4 +source $lib_dir/tc_common.sh +source $lib_dir/lib.sh + +h1_create() +{ + simple_if_init $h1 192.0.2.1/24 2001:db8:1::1/64 + + ip -4 route add default vrf v$h1 nexthop via 192.0.2.2 + ip -6 route add default vrf v$h1 nexthop via 2001:db8:1::2 +} + +h1_destroy() +{ + ip -6 route del default vrf v$h1 nexthop via 2001:db8:1::2 + ip -4 route del default vrf v$h1 nexthop via 192.0.2.2 + + simple_if_fini $h1 192.0.2.1/24 2001:db8:1::1/64 +} + +h2_create() +{ + simple_if_init $h2 198.51.100.1/24 2001:db8:2::1/64 + + ip -4 route add default vrf v$h2 nexthop via 198.51.100.2 + ip -6 route add default vrf v$h2 nexthop via 2001:db8:2::2 +} + +h2_destroy() +{ + ip -6 route del default vrf v$h2 nexthop via 2001:db8:2::2 + ip -4 route del default vrf v$h2 nexthop via 198.51.100.2 + + simple_if_fini $h2 198.51.100.1/24 2001:db8:2::1/64 +} + +switch_create() +{ + ip link add name br0 type bridge mcast_snooping 0 + ip link set dev br0 up + + ip link set dev $swp1 master br0 + ip link set dev $swp1 up + ip link set dev $swp2 master br0 + ip link set dev $swp2 up + + tc qdisc add dev $swp1 clsact + tc qdisc add dev $swp2 clsact + + __addr_add_del br0 add 192.0.2.2/24 2001:db8:1::2/64 + __addr_add_del br0 add 198.51.100.2/24 2001:db8:2::2/64 +} + +switch_destroy() +{ + __addr_add_del br0 del 198.51.100.2/24 2001:db8:2::2/64 + __addr_add_del br0 del 192.0.2.2/24 2001:db8:1::2/64 + + tc qdisc del dev $swp2 clsact + tc qdisc del dev $swp1 clsact + + ip link set dev $swp2 down + ip link set dev $swp2 nomaster + ip link set dev $swp1 down + ip link set dev $swp1 nomaster + + ip link set dev br0 down + ip link del dev br0 +} + +ping_ipv4() +{ + ping_test $h1 198.51.100.1 ": h1->h2" +} + +ping_ipv6() +{ + ping6_test $h1 2001:db8:2::1 ": h1->h2" +} + +fwd_mark_ipv4() +{ + # Transmit packets from H1 to H2 and make sure they are trapped at + # swp1 due to loopback error, but only forwarded by the ASIC through + # swp2 + + tc filter add dev $swp1 ingress protocol ip pref 1 handle 101 flower \ + skip_hw dst_ip 198.51.100.1 ip_proto udp dst_port 52768 \ + action pass + + tc filter add dev $swp2 egress protocol ip pref 1 handle 101 flower \ + skip_hw dst_ip 198.51.100.1 ip_proto udp dst_port 52768 \ + action pass + + tc filter add dev $swp2 egress protocol ip pref 2 handle 102 flower \ + skip_sw dst_ip 198.51.100.1 ip_proto udp dst_port 52768 \ + action pass + + ip vrf exec v$h1 $MZ $h1 -c 10 -d 100msec -p 64 -A 192.0.2.1 \ + -B 198.51.100.1 -t udp dp=52768,sp=42768 -q + + RET=0 + + tc_check_packets "dev $swp1 ingress" 101 10 + check_err $? + + log_test "fwd mark: trapping IPv4 packets due to LBERROR" + + RET=0 + + tc_check_packets "dev $swp2 egress" 101 0 + check_err $? + + log_test "fwd mark: forwarding IPv4 packets in software" + + RET=0 + + tc_check_packets "dev $swp2 egress" 102 10 + check_err $? + + log_test "fwd mark: forwarding IPv4 packets in hardware" + + tc filter del dev $swp2 egress protocol ip pref 2 handle 102 flower + tc filter del dev $swp2 egress protocol ip pref 1 handle 101 flower + tc filter del dev $swp1 ingress protocol ip pref 1 handle 101 flower +} + +fwd_mark_ipv6() +{ + tc filter add dev $swp1 ingress protocol ipv6 pref 1 handle 101 flower \ + skip_hw dst_ip 2001:db8:2::1 ip_proto udp dst_port 52768 \ + action pass + + tc filter add dev $swp2 egress protocol ipv6 pref 1 handle 101 flower \ + skip_hw dst_ip 2001:db8:2::1 ip_proto udp dst_port 52768 \ + action pass + + tc filter add dev $swp2 egress protocol ipv6 pref 2 handle 102 flower \ + skip_sw dst_ip 2001:db8:2::1 ip_proto udp dst_port 52768 \ + action pass + + ip vrf exec v$h1 $MZ $h1 -6 -c 10 -d 100msec -p 64 -A 2001:db8:1::1 \ + -B 2001:db8:2::1 -t udp dp=52768,sp=42768 -q + + RET=0 + + tc_check_packets "dev $swp1 ingress" 101 10 + check_err $? + + log_test "fwd mark: trapping IPv6 packets due to LBERROR" + + RET=0 + + tc_check_packets "dev $swp2 egress" 101 0 + check_err $? + + log_test "fwd mark: forwarding IPv6 packets in software" + + RET=0 + + tc_check_packets "dev $swp2 egress" 102 10 + check_err $? + + log_test "fwd mark: forwarding IPv6 packets in hardware" + + tc filter del dev $swp2 egress protocol ipv6 pref 2 handle 102 flower + tc filter del dev $swp2 egress protocol ipv6 pref 1 handle 101 flower + tc filter del dev $swp1 ingress protocol ipv6 pref 1 handle 101 flower +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + vrf_prepare + forwarding_enable + + sysctl_set net.ipv4.conf.all.accept_redirects 0 + sysctl_set net.ipv6.conf.all.accept_redirects 0 + + h1_create + h2_create + switch_create +} + +cleanup() +{ + pre_cleanup + + switch_destroy + h2_destroy + h1_destroy + + sysctl_restore net.ipv6.conf.all.accept_redirects + sysctl_restore net.ipv4.conf.all.accept_redirects + + forwarding_restore + vrf_cleanup +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/port_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/port_scale.sh new file mode 100644 index 000000000..1e9a4aff7 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/port_scale.sh @@ -0,0 +1,62 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Test for physical ports resource. The test splits each splittable port +# to its width and checks that eventually the number of physical ports equals +# the maximum number of physical ports. + +PORT_NUM_NETIFS=0 + +declare -a unsplit + +port_setup_prepare() +{ + : +} + +port_cleanup() +{ + pre_cleanup + + for port in "${unsplit[@]}"; do + devlink port unsplit $port + check_err $? "Did not unsplit $netdev" + done + unsplit=() +} + +split_all_ports() +{ + local should_fail=$1; shift + + # Loop over the splittable netdevs and create tuples of netdev along + # with its width. For example: + # '$netdev1 $count1 $netdev2 $count2...', when: + # $netdev1-2 are splittable netdevs in the device, and + # $count1-2 are the netdevs width respectively. + while read netdev count <<<$( + devlink -j port show | + jq -r '.[][] | select(.splittable==true) | "\(.netdev) \(.lanes)"' + ) + [[ ! -z $netdev ]] + do + devlink port split $netdev count $count + check_err $? "Did not split $netdev into $count" + unsplit+=( "${netdev}s0" ) + done +} + +port_test() +{ + local max_ports=$1; shift + local should_fail=$1; shift + + split_all_ports $should_fail + + occ=$(devlink -j resource show $DEVLINK_DEV \ + | jq '.[][][] | select(.name=="physical_ports") |.["occ"]') + + [[ $occ -eq $max_ports ]] + check_err_fail $should_fail $? "Attempt to create $max_ports ports (actual result $occ)" + +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/q_in_q_veto.sh b/tools/testing/selftests/drivers/net/mlxsw/q_in_q_veto.sh new file mode 100755 index 000000000..7edaed8eb --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/q_in_q_veto.sh @@ -0,0 +1,296 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + create_8021ad_vlan_upper_on_top_front_panel_port + create_8021ad_vlan_upper_on_top_bridge_port + create_8021ad_vlan_upper_on_top_lag + create_8021ad_vlan_upper_on_top_bridge + create_8021ad_vlan_upper_on_top_8021ad_bridge + create_vlan_upper_on_top_8021ad_bridge + create_vlan_upper_on_top_front_panel_enslaved_to_8021ad_bridge + create_vlan_upper_on_top_lag_enslaved_to_8021ad_bridge + enslave_front_panel_with_vlan_upper_to_8021ad_bridge + enslave_lag_with_vlan_upper_to_8021ad_bridge + add_ip_address_to_8021ad_bridge + switch_bridge_protocol_from_8021q_to_8021ad +" +NUM_NETIFS=2 +source $lib_dir/lib.sh + +setup_prepare() +{ + swp1=${NETIFS[p1]} + swp2=${NETIFS[p2]} + + ip link set dev $swp1 up + ip link set dev $swp2 up + + sleep 10 +} + +cleanup() +{ + pre_cleanup + + ip link set dev $swp2 down + ip link set dev $swp1 down +} + +create_vlan_upper_on_top_of_bridge() +{ + RET=0 + + local bridge_proto=$1; shift + local netdev_proto=$1; shift + + ip link add dev br0 type bridge vlan_filtering 1 \ + vlan_protocol $bridge_proto vlan_default_pvid 0 mcast_snooping 0 + + ip link set dev br0 up + ip link set dev $swp1 master br0 + + ip link add name br0.100 link br0 type vlan \ + protocol $netdev_proto id 100 2>/dev/null + check_fail $? "$netdev_proto vlan upper creation on top of an $bridge_proto bridge not rejected" + + ip link add name br0.100 link br0 type vlan \ + protocol $netdev_proto id 100 2>&1 >/dev/null \ + | grep -q mlxsw_spectrum + check_err $? "$netdev_proto vlan upper creation on top of an $bridge_proto bridge rejected without extack" + + log_test "create $netdev_proto vlan upper on top $bridge_proto bridge" + + ip link del dev br0 +} + +create_8021ad_vlan_upper_on_top_front_panel_port() +{ + RET=0 + + ip link add name $swp1.100 link $swp1 type vlan \ + protocol 802.1ad id 100 2>/dev/null + check_fail $? "802.1ad vlan upper creation on top of a front panel not rejected" + + ip link add name $swp1.100 link $swp1 type vlan \ + protocol 802.1ad id 100 2>&1 >/dev/null \ + | grep -q mlxsw_spectrum + check_err $? "802.1ad vlan upper creation on top of a front panel rejected without extack" + + log_test "create 802.1ad vlan upper on top of a front panel" +} + +create_8021ad_vlan_upper_on_top_bridge_port() +{ + RET=0 + + ip link add dev br0 type bridge vlan_filtering 1 \ + vlan_default_pvid 0 mcast_snooping 0 + + ip link set dev $swp1 master br0 + ip link set dev br0 up + + ip link add name $swp1.100 link $swp1 type vlan \ + protocol 802.1ad id 100 2>/dev/null + check_fail $? "802.1ad vlan upper creation on top of a bridge port not rejected" + + ip link add name $swp1.100 link $swp1 type vlan \ + protocol 802.1ad id 100 2>&1 >/dev/null \ + | grep -q mlxsw_spectrum + check_err $? "802.1ad vlan upper creation on top of a bridge port rejected without extack" + + log_test "create 802.1ad vlan upper on top of a bridge port" + + ip link del dev br0 +} + +create_8021ad_vlan_upper_on_top_lag() +{ + RET=0 + + ip link add name bond1 type bond mode 802.3ad + ip link set dev $swp1 down + ip link set dev $swp1 master bond1 + + ip link add name bond1.100 link bond1 type vlan \ + protocol 802.1ad id 100 2>/dev/null + check_fail $? "802.1ad vlan upper creation on top of a lag not rejected" + + ip link add name bond1.100 link bond1 type vlan \ + protocol 802.1ad id 100 2>&1 >/dev/null \ + | grep -q mlxsw_spectrum + check_err $? "802.1ad vlan upper creation on top of a lag rejected without extack" + + log_test "create 802.1ad vlan upper on top of a lag" + + ip link del dev bond1 +} + +create_8021ad_vlan_upper_on_top_bridge() +{ + RET=0 + + create_vlan_upper_on_top_of_bridge "802.1q" "802.1ad" +} + +create_8021ad_vlan_upper_on_top_8021ad_bridge() +{ + RET=0 + + create_vlan_upper_on_top_of_bridge "802.1ad" "802.1ad" +} + +create_vlan_upper_on_top_8021ad_bridge() +{ + RET=0 + + create_vlan_upper_on_top_of_bridge "802.1ad" "802.1q" +} + +create_vlan_upper_on_top_front_panel_enslaved_to_8021ad_bridge() +{ + RET=0 + + ip link add dev br0 type bridge vlan_filtering 1 \ + vlan_protocol 802.1ad vlan_default_pvid 0 mcast_snooping 0 + ip link set dev br0 up + + ip link set dev $swp1 master br0 + + ip link add name $swp1.100 link $swp1 type vlan id 100 2>/dev/null + check_fail $? "vlan upper creation on top of front panel enslaved to 802.1ad bridge not rejected" + + ip link add name $swp1.100 link $swp1 type vlan id 100 2>&1 >/dev/null \ + | grep -q mlxsw_spectrum + check_err $? "vlan upper creation on top of front panel enslaved to 802.1ad bridge rejected without extack" + + log_test "create vlan upper on top of front panel enslaved to 802.1ad bridge" + + ip link del dev br0 +} + +create_vlan_upper_on_top_lag_enslaved_to_8021ad_bridge() +{ + RET=0 + + ip link add dev br0 type bridge vlan_filtering 1 \ + vlan_protocol 802.1ad vlan_default_pvid 0 mcast_snooping 0 + ip link set dev br0 up + + ip link add name bond1 type bond mode 802.3ad + ip link set dev $swp1 down + ip link set dev $swp1 master bond1 + ip link set dev bond1 master br0 + + ip link add name bond1.100 link bond1 type vlan id 100 2>/dev/null + check_fail $? "vlan upper creation on top of lag enslaved to 802.1ad bridge not rejected" + + ip link add name bond1.100 link bond1 type vlan id 100 2>&1 >/dev/null \ + | grep -q mlxsw_spectrum + check_err $? "vlan upper creation on top of lag enslaved to 802.1ad bridge rejected without extack" + + log_test "create vlan upper on top of lag enslaved to 802.1ad bridge" + + ip link del dev bond1 + ip link del dev br0 +} + +enslave_front_panel_with_vlan_upper_to_8021ad_bridge() +{ + RET=0 + + ip link add dev br0 type bridge vlan_filtering 1 \ + vlan_protocol 802.1ad vlan_default_pvid 0 mcast_snooping 0 + ip link set dev br0 up + + ip link add name $swp1.100 link $swp1 type vlan id 100 + + ip link set dev $swp1 master br0 2>/dev/null + check_fail $? "front panel with vlan upper enslavemnt to 802.1ad bridge not rejected" + + ip link set dev $swp1 master br0 2>&1 >/dev/null | grep -q mlxsw_spectrum + check_err $? "front panel with vlan upper enslavemnt to 802.1ad bridge rejected without extack" + + log_test "enslave front panel with vlan upper to 802.1ad bridge" + + ip link del dev $swp1.100 + ip link del dev br0 +} + +enslave_lag_with_vlan_upper_to_8021ad_bridge() +{ + RET=0 + + ip link add dev br0 type bridge vlan_filtering 1 \ + vlan_protocol 802.1ad vlan_default_pvid 0 mcast_snooping 0 + ip link set dev br0 up + + ip link add name bond1 type bond mode 802.3ad + ip link set dev $swp1 down + ip link set dev $swp1 master bond1 + ip link add name bond1.100 link bond1 type vlan id 100 + + ip link set dev bond1 master br0 2>/dev/null + check_fail $? "lag with vlan upper enslavemnt to 802.1ad bridge not rejected" + + ip link set dev bond1 master br0 2>&1 >/dev/null \ + | grep -q mlxsw_spectrum + check_err $? "lag with vlan upper enslavemnt to 802.1ad bridge rejected without extack" + + log_test "enslave lag with vlan upper to 802.1ad bridge" + + ip link del dev bond1 + ip link del dev br0 +} + + +add_ip_address_to_8021ad_bridge() +{ + RET=0 + + ip link add dev br0 type bridge vlan_filtering 1 \ + vlan_protocol 802.1ad vlan_default_pvid 0 mcast_snooping 0 + + ip link set dev br0 up + ip link set dev $swp1 master br0 + + ip addr add dev br0 192.0.2.17/28 2>/dev/null + check_fail $? "IP address addition to 802.1ad bridge not rejected" + + ip addr add dev br0 192.0.2.17/28 2>&1 >/dev/null | grep -q mlxsw_spectrum + check_err $? "IP address addition to 802.1ad bridge rejected without extack" + + log_test "IP address addition to 802.1ad bridge" + + ip link del dev br0 +} + +switch_bridge_protocol_from_8021q_to_8021ad() +{ + RET=0 + + ip link add dev br0 type bridge vlan_filtering 1 \ + vlan_protocol 802.1ad vlan_default_pvid 0 mcast_snooping 0 + + ip link set dev br0 up + ip link set dev $swp1 master br0 + + ip link set dev br0 type bridge vlan_protocol 802.1q 2>/dev/null + check_fail $? "switching bridge protocol from 802.1q to 802.1ad not rejected" + + log_test "switch bridge protocol" + + ip link del dev br0 +} + + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/qos_defprio.sh b/tools/testing/selftests/drivers/net/mlxsw/qos_defprio.sh new file mode 100755 index 000000000..71066bc4b --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/qos_defprio.sh @@ -0,0 +1,166 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Test for port-default priority. Non-IP packets ingress $swp1 and are +# prioritized according to the default priority specified at the port. +# rx_octets_prio_* counters are used to verify the prioritization. +# +# +-----------------------+ +# | H1 | +# | + $h1 | +# | | 192.0.2.1/28 | +# +----|------------------+ +# | +# +----|------------------+ +# | SW | | +# | + $swp1 | +# | 192.0.2.2/28 | +# | APP=<prio>,1,0 | +# +-----------------------+ + +ALL_TESTS=" + ping_ipv4 + test_defprio +" + +lib_dir=$(dirname $0)/../../../net/forwarding + +NUM_NETIFS=2 +: ${HIT_TIMEOUT:=1000} # ms +source $lib_dir/lib.sh + +declare -a APP + +defprio_install() +{ + local dev=$1; shift + local prio=$1; shift + local app="app=$prio,1,0" + + lldptool -T -i $dev -V APP $app >/dev/null + lldpad_app_wait_set $dev + APP[$prio]=$app +} + +defprio_uninstall() +{ + local dev=$1; shift + local prio=$1; shift + local app=${APP[$prio]} + + lldptool -T -i $dev -V APP -d $app >/dev/null + lldpad_app_wait_del + unset APP[$prio] +} + +defprio_flush() +{ + local dev=$1; shift + local prio + + if ((${#APP[@]})); then + lldptool -T -i $dev -V APP -d ${APP[@]} >/dev/null + fi + lldpad_app_wait_del + APP=() +} + +h1_create() +{ + simple_if_init $h1 192.0.2.1/28 +} + +h1_destroy() +{ + simple_if_fini $h1 192.0.2.1/28 +} + +switch_create() +{ + ip link set dev $swp1 up + ip addr add dev $swp1 192.0.2.2/28 +} + +switch_destroy() +{ + defprio_flush $swp1 + ip addr del dev $swp1 192.0.2.2/28 + ip link set dev $swp1 down +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + vrf_prepare + + h1_create + switch_create +} + +cleanup() +{ + pre_cleanup + + switch_destroy + h1_destroy + + vrf_cleanup +} + +ping_ipv4() +{ + ping_test $h1 192.0.2.2 +} + +__test_defprio() +{ + local prio_install=$1; shift + local prio_observe=$1; shift + local key + local t1 + local i + + RET=0 + + defprio_install $swp1 $prio_install + + local t0=$(ethtool_stats_get $swp1 rx_frames_prio_$prio_observe) + mausezahn -q $h1 -d 100m -c 10 -t arp reply + t1=$(busywait "$HIT_TIMEOUT" until_counter_is ">= $((t0 + 10))" \ + ethtool_stats_get $swp1 rx_frames_prio_$prio_observe) + + check_err $? "Default priority $prio_install/$prio_observe: Expected to capture 10 packets, got $((t1 - t0))." + log_test "Default priority $prio_install/$prio_observe" + + defprio_uninstall $swp1 $prio_install +} + +test_defprio() +{ + local prio + + for prio in {0..7}; do + __test_defprio $prio $prio + done + + defprio_install $swp1 3 + __test_defprio 0 3 + __test_defprio 1 3 + __test_defprio 2 3 + __test_defprio 4 4 + __test_defprio 5 5 + __test_defprio 6 6 + __test_defprio 7 7 + defprio_uninstall $swp1 3 +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/qos_dscp_bridge.sh b/tools/testing/selftests/drivers/net/mlxsw/qos_dscp_bridge.sh new file mode 100755 index 000000000..28a570006 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/qos_dscp_bridge.sh @@ -0,0 +1,194 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Test for DSCP prioritization and rewrite. Packets ingress $swp1 with a DSCP +# tag and are prioritized according to the map at $swp1. They egress $swp2 and +# the DSCP value is updated to match the map at that interface. The updated DSCP +# tag is verified at $h2. +# +# ICMP responses are produced with the same DSCP tag that arrived at $h2. They +# go through prioritization at $swp2 and DSCP retagging at $swp1. The tag is +# verified at $h1--it should match the original tag. +# +# +----------------------+ +----------------------+ +# | H1 | | H2 | +# | + $h1 | | $h2 + | +# | | 192.0.2.1/28 | | 192.0.2.2/28 | | +# +----|-----------------+ +----------------|-----+ +# | | +# +----|----------------------------------------------------------------|-----+ +# | SW | | | +# | +-|----------------------------------------------------------------|-+ | +# | | + $swp1 BR $swp2 + | | +# | | APP=0,5,10 .. 7,5,17 APP=0,5,20 .. 7,5,27 | | +# | +--------------------------------------------------------------------+ | +# +---------------------------------------------------------------------------+ + +ALL_TESTS=" + ping_ipv4 + test_dscp +" + +lib_dir=$(dirname $0)/../../../net/forwarding + +NUM_NETIFS=4 +source $lib_dir/lib.sh + +h1_create() +{ + simple_if_init $h1 192.0.2.1/28 + tc qdisc add dev $h1 clsact + dscp_capture_install $h1 10 +} + +h1_destroy() +{ + dscp_capture_uninstall $h1 10 + tc qdisc del dev $h1 clsact + simple_if_fini $h1 192.0.2.1/28 +} + +h2_create() +{ + simple_if_init $h2 192.0.2.2/28 + tc qdisc add dev $h2 clsact + dscp_capture_install $h2 20 +} + +h2_destroy() +{ + dscp_capture_uninstall $h2 20 + tc qdisc del dev $h2 clsact + simple_if_fini $h2 192.0.2.2/28 +} + +dscp_map() +{ + local base=$1; shift + local prio + + for prio in {0..7}; do + echo app=$prio,5,$((base + prio)) + done +} + +switch_create() +{ + ip link add name br1 type bridge vlan_filtering 1 + ip link set dev br1 up + ip link set dev $swp1 master br1 + ip link set dev $swp1 up + ip link set dev $swp2 master br1 + ip link set dev $swp2 up + + lldptool -T -i $swp1 -V APP $(dscp_map 10) >/dev/null + lldptool -T -i $swp2 -V APP $(dscp_map 20) >/dev/null + lldpad_app_wait_set $swp1 + lldpad_app_wait_set $swp2 +} + +switch_destroy() +{ + lldptool -T -i $swp2 -V APP -d $(dscp_map 20) >/dev/null + lldptool -T -i $swp1 -V APP -d $(dscp_map 10) >/dev/null + lldpad_app_wait_del + + ip link set dev $swp2 down + ip link set dev $swp2 nomaster + ip link set dev $swp1 down + ip link set dev $swp1 nomaster + ip link del dev br1 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + vrf_prepare + + h1_create + h2_create + switch_create +} + +cleanup() +{ + pre_cleanup + + switch_destroy + h2_destroy + h1_destroy + + vrf_cleanup +} + +ping_ipv4() +{ + ping_test $h1 192.0.2.2 +} + +dscp_ping_test() +{ + local vrf_name=$1; shift + local sip=$1; shift + local dip=$1; shift + local prio=$1; shift + local dev_10=$1; shift + local dev_20=$1; shift + local key + + local dscp_10=$(((prio + 10) << 2)) + local dscp_20=$(((prio + 20) << 2)) + + RET=0 + + local -A t0s + eval "t0s=($(dscp_fetch_stats $dev_10 10) + $(dscp_fetch_stats $dev_20 20))" + + local ping_timeout=$((PING_TIMEOUT * 5)) + ip vrf exec $vrf_name \ + ${PING} -Q $dscp_10 ${sip:+-I $sip} $dip \ + -c 10 -i 0.5 -w $ping_timeout &> /dev/null + + local -A t1s + eval "t1s=($(dscp_fetch_stats $dev_10 10) + $(dscp_fetch_stats $dev_20 20))" + + for key in ${!t0s[@]}; do + local expect + if ((key == prio+10 || key == prio+20)); then + expect=10 + else + expect=0 + fi + + local delta=$((t1s[$key] - t0s[$key])) + ((expect == delta)) + check_err $? "DSCP $key: Expected to capture $expect packets, got $delta." + done + + log_test "DSCP rewrite: $dscp_10-(prio $prio)-$dscp_20" +} + +test_dscp() +{ + local prio + + for prio in {0..7}; do + dscp_ping_test v$h1 192.0.2.1 192.0.2.2 $prio $h1 $h2 + done +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/qos_dscp_router.sh b/tools/testing/selftests/drivers/net/mlxsw/qos_dscp_router.sh new file mode 100755 index 000000000..4cb2aa652 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/qos_dscp_router.sh @@ -0,0 +1,284 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Test for DSCP prioritization in the router. +# +# With ip_forward_update_priority disabled, the packets are expected to keep +# their DSCP (which in this test uses only values 0..7) intact as they are +# forwarded by the switch. That is verified at $h2. ICMP responses are formed +# with the same DSCP as the requests, and likewise pass through the switch +# intact, which is verified at $h1. +# +# With ip_forward_update_priority enabled, router reprioritizes the packets +# according to the table in reprioritize(). Thus, say, DSCP 7 maps to priority +# 4, which on egress maps back to DSCP 4. The response packet then gets +# reprioritized to 6, getting DSCP 6 on egress. +# +# +----------------------+ +----------------------+ +# | H1 | | H2 | +# | + $h1 | | $h2 + | +# | | 192.0.2.1/28 | | 192.0.2.18/28 | | +# +----|-----------------+ +----------------|-----+ +# | | +# +----|----------------------------------------------------------------|-----+ +# | SW | | | +# | + $swp1 $swp2 + | +# | 192.0.2.2/28 192.0.2.17/28 | +# | APP=0,5,0 .. 7,5,7 APP=0,5,0 .. 7,5,7 | +# +---------------------------------------------------------------------------+ + +ALL_TESTS=" + ping_ipv4 + test_update + test_no_update + test_pedit_norewrite + test_dscp_leftover +" + +lib_dir=$(dirname $0)/../../../net/forwarding + +NUM_NETIFS=4 +source $lib_dir/lib.sh + +reprioritize() +{ + local in=$1; shift + + # This is based on rt_tos2priority in include/net/route.h. Assuming 1:1 + # mapping between priorities and TOS, it yields a new priority for a + # packet with ingress priority of $in. + local -a reprio=(0 0 2 2 6 6 4 4) + + echo ${reprio[$in]} +} + +zero() +{ + echo 0 +} + +three() +{ + echo 3 +} + +h1_create() +{ + simple_if_init $h1 192.0.2.1/28 + tc qdisc add dev $h1 clsact + dscp_capture_install $h1 0 + ip route add vrf v$h1 192.0.2.16/28 via 192.0.2.2 +} + +h1_destroy() +{ + ip route del vrf v$h1 192.0.2.16/28 via 192.0.2.2 + dscp_capture_uninstall $h1 0 + tc qdisc del dev $h1 clsact + simple_if_fini $h1 192.0.2.1/28 +} + +h2_create() +{ + simple_if_init $h2 192.0.2.18/28 + tc qdisc add dev $h2 clsact + dscp_capture_install $h2 0 + ip route add vrf v$h2 192.0.2.0/28 via 192.0.2.17 +} + +h2_destroy() +{ + ip route del vrf v$h2 192.0.2.0/28 via 192.0.2.17 + dscp_capture_uninstall $h2 0 + tc qdisc del dev $h2 clsact + simple_if_fini $h2 192.0.2.18/28 +} + +dscp_map() +{ + local base=$1; shift + local prio + + for prio in {0..7}; do + echo app=$prio,5,$((base + prio)) + done +} + +switch_create() +{ + simple_if_init $swp1 192.0.2.2/28 + __simple_if_init $swp2 v$swp1 192.0.2.17/28 + + tc qdisc add dev $swp1 clsact + tc qdisc add dev $swp2 clsact + + lldptool -T -i $swp1 -V APP $(dscp_map 0) >/dev/null + lldptool -T -i $swp2 -V APP $(dscp_map 0) >/dev/null + lldpad_app_wait_set $swp1 + lldpad_app_wait_set $swp2 +} + +switch_destroy() +{ + lldptool -T -i $swp2 -V APP -d $(dscp_map 0) >/dev/null + lldptool -T -i $swp1 -V APP -d $(dscp_map 0) >/dev/null + lldpad_app_wait_del + + tc qdisc del dev $swp2 clsact + tc qdisc del dev $swp1 clsact + + __simple_if_fini $swp2 192.0.2.17/28 + simple_if_fini $swp1 192.0.2.2/28 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + vrf_prepare + + sysctl_set net.ipv4.ip_forward_update_priority 1 + h1_create + h2_create + switch_create +} + +cleanup() +{ + pre_cleanup + + switch_destroy + h2_destroy + h1_destroy + sysctl_restore net.ipv4.ip_forward_update_priority + + vrf_cleanup +} + +ping_ipv4() +{ + ping_test $h1 192.0.2.18 +} + +dscp_ping_test() +{ + local vrf_name=$1; shift + local sip=$1; shift + local dip=$1; shift + local prio=$1; shift + local reprio=$1; shift + local dev1=$1; shift + local dev2=$1; shift + local i + + local prio2=$($reprio $prio) # ICMP Request egress prio + local prio3=$($reprio $prio2) # ICMP Response egress prio + + local dscp=$((prio << 2)) # ICMP Request ingress DSCP + local dscp2=$((prio2 << 2)) # ICMP Request egress DSCP + local dscp3=$((prio3 << 2)) # ICMP Response egress DSCP + + RET=0 + + eval "local -A dev1_t0s=($(dscp_fetch_stats $dev1 0))" + eval "local -A dev2_t0s=($(dscp_fetch_stats $dev2 0))" + + local ping_timeout=$((PING_TIMEOUT * 5)) + ip vrf exec $vrf_name \ + ${PING} -Q $dscp ${sip:+-I $sip} $dip \ + -c 10 -i 0.5 -w $ping_timeout &> /dev/null + + eval "local -A dev1_t1s=($(dscp_fetch_stats $dev1 0))" + eval "local -A dev2_t1s=($(dscp_fetch_stats $dev2 0))" + + for i in {0..7}; do + local dscpi=$((i << 2)) + local expect2=0 + local expect3=0 + + if ((i == prio2)); then + expect2=10 + fi + if ((i == prio3)); then + expect3=10 + fi + + local delta=$((dev2_t1s[$i] - dev2_t0s[$i])) + ((expect2 == delta)) + check_err $? "DSCP $dscpi@$dev2: Expected to capture $expect2 packets, got $delta." + + delta=$((dev1_t1s[$i] - dev1_t0s[$i])) + ((expect3 == delta)) + check_err $? "DSCP $dscpi@$dev1: Expected to capture $expect3 packets, got $delta." + done + + log_test "DSCP rewrite: $dscp-(prio $prio2)-$dscp2-(prio $prio3)-$dscp3" +} + +__test_update() +{ + local update=$1; shift + local reprio=$1; shift + local prio + + sysctl_restore net.ipv4.ip_forward_update_priority + sysctl_set net.ipv4.ip_forward_update_priority $update + + for prio in {0..7}; do + dscp_ping_test v$h1 192.0.2.1 192.0.2.18 $prio $reprio $h1 $h2 + done +} + +test_update() +{ + echo "Test net.ipv4.ip_forward_update_priority=1" + __test_update 1 reprioritize +} + +test_no_update() +{ + echo "Test net.ipv4.ip_forward_update_priority=0" + __test_update 0 echo +} + +# Test that when DSCP is updated in pedit, the DSCP rewrite is turned off. +test_pedit_norewrite() +{ + echo "Test no DSCP rewrite after DSCP is updated by pedit" + + tc filter add dev $swp1 ingress handle 101 pref 1 prot ip flower \ + action pedit ex munge ip dsfield set $((3 << 2)) retain 0xfc \ + action skbedit priority 3 + + __test_update 0 three + + tc filter del dev $swp1 ingress pref 1 +} + +# Test that when the last APP rule is removed, the prio->DSCP map is properly +# set to zeroes, and that the last APP rule does not stay active in the ASIC. +test_dscp_leftover() +{ + echo "Test that last removed DSCP rule is deconfigured correctly" + + lldptool -T -i $swp2 -V APP -d $(dscp_map 0) >/dev/null + lldpad_app_wait_del + + __test_update 0 zero + + lldptool -T -i $swp2 -V APP $(dscp_map 0) >/dev/null + lldpad_app_wait_set $swp2 +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/qos_ets_strict.sh b/tools/testing/selftests/drivers/net/mlxsw/qos_ets_strict.sh new file mode 100755 index 000000000..690d8daa7 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/qos_ets_strict.sh @@ -0,0 +1,321 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# A test for strict prioritization of traffic in the switch. Run two streams of +# traffic, each through a different ingress port, one tagged with PCP of 1, the +# other with PCP of 2. Both streams converge at one egress port, where they are +# assigned TC of, respectively, 1 and 2, with strict priority configured between +# them. In H3, we expect to see (almost) exclusively the high-priority traffic. +# +# Please see qos_mc_aware.sh for an explanation of why we use mausezahn and +# counters instead of just running iperf3. +# +# +---------------------------+ +-----------------------------+ +# | H1 | | H2 | +# | $h1.111 + | | + $h2.222 | +# | 192.0.2.33/28 | | | | 192.0.2.65/28 | +# | e-qos-map 0:1 | | | | e-qos-map 0:2 | +# | | | | | | +# | $h1 + | | + $h2 | +# +-----------------|---------+ +---------|-------------------+ +# | | +# +-----------------|-------------------------------------|-------------------+ +# | $swp1 + + $swp2 | +# | >1Gbps | | >1Gbps | +# | +---------------|-----------+ +----------|----------------+ | +# | | $swp1.111 + | | + $swp2.222 | | +# | | BR111 | SW | BR222 | | +# | | $swp3.111 + | | + $swp3.222 | | +# | +---------------|-----------+ +----------|----------------+ | +# | \_____________________________________/ | +# | | | +# | + $swp3 | +# | | 1Gbps bottleneck | +# | | ETS: (up n->tc n for n in 0..7) | +# | | strict priority | +# +------------------------------------|--------------------------------------+ +# | +# +--------------------|--------------------+ +# | + $h3 H3 | +# | / \ | +# | / \ | +# | $h3.111 + + $h3.222 | +# | 192.0.2.34/28 192.0.2.66/28 | +# +-----------------------------------------+ + +ALL_TESTS=" + ping_ipv4 + test_ets_strict +" + +lib_dir=$(dirname $0)/../../../net/forwarding + +NUM_NETIFS=6 +source $lib_dir/lib.sh +source $lib_dir/devlink_lib.sh +source qos_lib.sh + +h1_create() +{ + simple_if_init $h1 + mtu_set $h1 10000 + + vlan_create $h1 111 v$h1 192.0.2.33/28 + ip link set dev $h1.111 type vlan egress-qos-map 0:1 +} + +h1_destroy() +{ + vlan_destroy $h1 111 + + mtu_restore $h1 + simple_if_fini $h1 +} + +h2_create() +{ + simple_if_init $h2 + mtu_set $h2 10000 + + vlan_create $h2 222 v$h2 192.0.2.65/28 + ip link set dev $h2.222 type vlan egress-qos-map 0:2 +} + +h2_destroy() +{ + vlan_destroy $h2 222 + + mtu_restore $h2 + simple_if_fini $h2 +} + +h3_create() +{ + simple_if_init $h3 + mtu_set $h3 10000 + + vlan_create $h3 111 v$h3 192.0.2.34/28 + vlan_create $h3 222 v$h3 192.0.2.66/28 +} + +h3_destroy() +{ + vlan_destroy $h3 222 + vlan_destroy $h3 111 + + mtu_restore $h3 + simple_if_fini $h3 +} + +switch_create() +{ + ip link set dev $swp1 up + mtu_set $swp1 10000 + + ip link set dev $swp2 up + mtu_set $swp2 10000 + + # prio n -> TC n, strict scheduling + lldptool -T -i $swp3 -V ETS-CFG up2tc=0:0,1:1,2:2,3:3,4:4,5:5,6:6,7:7 + lldptool -T -i $swp3 -V ETS-CFG tsa=$( + )"0:strict,"$( + )"1:strict,"$( + )"2:strict,"$( + )"3:strict,"$( + )"4:strict,"$( + )"5:strict,"$( + )"6:strict,"$( + )"7:strict" + sleep 1 + + ip link set dev $swp3 up + mtu_set $swp3 10000 + tc qdisc replace dev $swp3 root handle 101: tbf rate 1gbit \ + burst 128K limit 1G + + vlan_create $swp1 111 + vlan_create $swp2 222 + vlan_create $swp3 111 + vlan_create $swp3 222 + + ip link add name br111 up type bridge vlan_filtering 0 + ip link set dev $swp1.111 master br111 + ip link set dev $swp3.111 master br111 + + ip link add name br222 up type bridge vlan_filtering 0 + ip link set dev $swp2.222 master br222 + ip link set dev $swp3.222 master br222 + + # Make sure that ingress quotas are smaller than egress so that there is + # room for both streams of traffic to be admitted to shared buffer. + devlink_pool_size_thtype_save 0 + devlink_pool_size_thtype_set 0 dynamic 10000000 + devlink_pool_size_thtype_save 4 + devlink_pool_size_thtype_set 4 dynamic 10000000 + + devlink_port_pool_th_save $swp1 0 + devlink_port_pool_th_set $swp1 0 6 + devlink_tc_bind_pool_th_save $swp1 1 ingress + devlink_tc_bind_pool_th_set $swp1 1 ingress 0 6 + + devlink_port_pool_th_save $swp2 0 + devlink_port_pool_th_set $swp2 0 6 + devlink_tc_bind_pool_th_save $swp2 2 ingress + devlink_tc_bind_pool_th_set $swp2 2 ingress 0 6 + + devlink_tc_bind_pool_th_save $swp3 1 egress + devlink_tc_bind_pool_th_set $swp3 1 egress 4 7 + devlink_tc_bind_pool_th_save $swp3 2 egress + devlink_tc_bind_pool_th_set $swp3 2 egress 4 7 + devlink_port_pool_th_save $swp3 4 + devlink_port_pool_th_set $swp3 4 7 +} + +switch_destroy() +{ + devlink_port_pool_th_restore $swp3 4 + devlink_tc_bind_pool_th_restore $swp3 2 egress + devlink_tc_bind_pool_th_restore $swp3 1 egress + + devlink_tc_bind_pool_th_restore $swp2 2 ingress + devlink_port_pool_th_restore $swp2 0 + + devlink_tc_bind_pool_th_restore $swp1 1 ingress + devlink_port_pool_th_restore $swp1 0 + + devlink_pool_size_thtype_restore 4 + devlink_pool_size_thtype_restore 0 + + ip link del dev br222 + ip link del dev br111 + + vlan_destroy $swp3 222 + vlan_destroy $swp3 111 + vlan_destroy $swp2 222 + vlan_destroy $swp1 111 + + tc qdisc del dev $swp3 root handle 101: + mtu_restore $swp3 + ip link set dev $swp3 down + lldptool -T -i $swp3 -V ETS-CFG up2tc=0:0,1:0,2:0,3:0,4:0,5:0,6:0,7:0 + + mtu_restore $swp2 + ip link set dev $swp2 down + + mtu_restore $swp1 + ip link set dev $swp1 down +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + swp3=${NETIFS[p5]} + h3=${NETIFS[p6]} + + h3mac=$(mac_get $h3) + + vrf_prepare + + h1_create + h2_create + h3_create + switch_create +} + +cleanup() +{ + pre_cleanup + + switch_destroy + h3_destroy + h2_destroy + h1_destroy + + vrf_cleanup +} + +ping_ipv4() +{ + ping_test $h1 192.0.2.34 " from H1" + ping_test $h2 192.0.2.66 " from H2" +} + +rel() +{ + local old=$1; shift + local new=$1; shift + + bc <<< " + scale=2 + ret = 100 * $new / $old + if (ret > 0) { ret } else { 0 } + " +} + +test_ets_strict() +{ + RET=0 + + # Run high-prio traffic on its own. + start_traffic $h2.222 192.0.2.65 192.0.2.66 $h3mac + local -a rate_2 + rate_2=($(measure_rate $swp2 $h3 rx_octets_prio_2 "prio 2")) + check_err $? "Could not get high enough prio-2 ingress rate" + local rate_2_in=${rate_2[0]} + local rate_2_eg=${rate_2[1]} + stop_traffic # $h2.222 + + # Start low-prio stream. + start_traffic $h1.111 192.0.2.33 192.0.2.34 $h3mac + + local -a rate_1 + rate_1=($(measure_rate $swp1 $h3 rx_octets_prio_1 "prio 1")) + check_err $? "Could not get high enough prio-1 ingress rate" + local rate_1_in=${rate_1[0]} + local rate_1_eg=${rate_1[1]} + + # High-prio and low-prio on their own should have about the same + # throughput. + local rel21=$(rel $rate_1_eg $rate_2_eg) + check_err $(bc <<< "$rel21 < 95") + check_err $(bc <<< "$rel21 > 105") + + # Start the high-prio stream--now both streams run. + start_traffic $h2.222 192.0.2.65 192.0.2.66 $h3mac + rate_3=($(measure_rate $swp2 $h3 rx_octets_prio_2 "prio 2 w/ 1")) + check_err $? "Could not get high enough prio-2 ingress rate with prio-1" + local rate_3_in=${rate_3[0]} + local rate_3_eg=${rate_3[1]} + stop_traffic # $h2.222 + + stop_traffic # $h1.111 + + # High-prio should have about the same throughput whether or not + # low-prio is in the system. + local rel32=$(rel $rate_2_eg $rate_3_eg) + check_err $(bc <<< "$rel32 < 95") + + log_test "strict priority" + echo "Ingress to switch:" + echo " p1 in rate $(humanize $rate_1_in)" + echo " p2 in rate $(humanize $rate_2_in)" + echo " p2 in rate w/ p1 $(humanize $rate_3_in)" + echo "Egress from switch:" + echo " p1 eg rate $(humanize $rate_1_eg)" + echo " p2 eg rate $(humanize $rate_2_eg) ($rel21% of p1)" + echo " p2 eg rate w/ p1 $(humanize $rate_3_eg) ($rel32% of p2)" +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/qos_headroom.sh b/tools/testing/selftests/drivers/net/mlxsw/qos_headroom.sh new file mode 100755 index 000000000..3569ff45f --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/qos_headroom.sh @@ -0,0 +1,380 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +ALL_TESTS=" + test_defaults + test_dcb_ets + test_mtu + test_pfc + test_int_buf + test_tc_priomap + test_tc_mtu + test_tc_sizes + test_tc_int_buf +" + +lib_dir=$(dirname $0)/../../../net/forwarding + +NUM_NETIFS=0 +source $lib_dir/lib.sh +source $lib_dir/devlink_lib.sh +source qos_lib.sh + +swp=$NETIF_NO_CABLE + +cleanup() +{ + pre_cleanup +} + +get_prio_pg() +{ + # Produces a string of numbers "<B0> <B1> ... <B7> ", where BX is number + # of buffer that priority X is mapped to. + dcb -j buffer show dev $swp | + jq -r '[.prio_buffer | .[] | tostring + " "] | add' +} + +get_prio_pfc() +{ + # Produces a string of numbers "<P0> <P1> ... <P7> ", where PX denotes + # whether priority X has PFC enabled (the value is 1) or disabled (0). + dcb -j pfc show dev $swp | + jq -r '[.prio_pfc | .[] | if . then "1 " else "0 " end] | add' +} + +get_prio_tc() +{ + # Produces a string of numbers "<T0> <T1> ... <T7> ", where TC is number + # of TC that priority X is mapped to. + dcb -j ets show dev $swp | + jq -r '[.prio_tc | .[] | tostring + " "] | add' +} + +get_buf_size() +{ + local idx=$1; shift + + dcb -j buffer show dev $swp | jq ".buffer_size[$idx]" +} + +get_tot_size() +{ + dcb -j buffer show dev $swp | jq '.total_size' +} + +check_prio_pg() +{ + local expect=$1; shift + + local current=$(get_prio_pg) + test "$current" = "$expect" + check_err $? "prio2buffer is '$current', expected '$expect'" +} + +check_prio_pfc() +{ + local expect=$1; shift + + local current=$(get_prio_pfc) + test "$current" = "$expect" + check_err $? "prio PFC is '$current', expected '$expect'" +} + +check_prio_tc() +{ + local expect=$1; shift + + local current=$(get_prio_tc) + test "$current" = "$expect" + check_err $? "prio_tc is '$current', expected '$expect'" +} + +__check_buf_size() +{ + local idx=$1; shift + local expr=$1; shift + local what=$1; shift + + local current=$(get_buf_size $idx) + ((current $expr)) + check_err $? "${what}buffer $idx size is '$current', expected '$expr'" + echo $current +} + +check_buf_size() +{ + __check_buf_size "$@" > /dev/null +} + +test_defaults() +{ + RET=0 + + check_prio_pg "0 0 0 0 0 0 0 0 " + check_prio_tc "0 0 0 0 0 0 0 0 " + check_prio_pfc "0 0 0 0 0 0 0 0 " + + log_test "Default headroom configuration" +} + +test_dcb_ets() +{ + RET=0 + + dcb ets set dev $swp prio-tc 0:0 1:2 2:4 3:6 4:1 5:3 6:5 7:7 + + check_prio_pg "0 2 4 6 1 3 5 7 " + check_prio_tc "0 2 4 6 1 3 5 7 " + check_prio_pfc "0 0 0 0 0 0 0 0 " + + dcb ets set dev $swp prio-tc all:0 + + check_prio_pg "0 0 0 0 0 0 0 0 " + check_prio_tc "0 0 0 0 0 0 0 0 " + + dcb buffer set dev $swp prio-buffer 0:1 1:3 2:5 3:7 4:0 5:2 6:4 7:6 2>/dev/null + check_fail $? "prio2buffer accepted in DCB mode" + + log_test "Configuring headroom through ETS" +} + +test_mtu() +{ + local what=$1; shift + local buf0size_2 + local buf0size + + RET=0 + buf0size=$(__check_buf_size 0 "> 0") + + mtu_set $swp 3000 + buf0size_2=$(__check_buf_size 0 "> $buf0size" "MTU 3000: ") + mtu_restore $swp + + mtu_set $swp 6000 + check_buf_size 0 "> $buf0size_2" "MTU 6000: " + mtu_restore $swp + + check_buf_size 0 "== $buf0size" + + log_test "${what}MTU impacts buffer size" +} + +test_tc_mtu() +{ + # In TC mode, MTU still impacts the threshold below which a buffer is + # not permitted to go. + + tc qdisc replace dev $swp root handle 1: bfifo limit 1.5M + test_mtu "TC: " + tc qdisc delete dev $swp root +} + +test_pfc() +{ + RET=0 + + dcb ets set dev $swp prio-tc all:0 5:1 6:2 7:3 + + local buf0size=$(get_buf_size 0) + local buf1size=$(get_buf_size 1) + local buf2size=$(get_buf_size 2) + local buf3size=$(get_buf_size 3) + check_buf_size 0 "> 0" + check_buf_size 1 "> 0" + check_buf_size 2 "> 0" + check_buf_size 3 "> 0" + check_buf_size 4 "== 0" + check_buf_size 5 "== 0" + check_buf_size 6 "== 0" + check_buf_size 7 "== 0" + + log_test "Buffer size sans PFC" + + RET=0 + + dcb pfc set dev $swp prio-pfc all:off 5:on 6:on 7:on delay 0 + + check_prio_pg "0 0 0 0 0 1 2 3 " + check_prio_pfc "0 0 0 0 0 1 1 1 " + check_buf_size 0 "== $buf0size" + check_buf_size 1 "> $buf1size" + check_buf_size 2 "> $buf2size" + check_buf_size 3 "> $buf3size" + + local buf1size=$(get_buf_size 1) + check_buf_size 2 "== $buf1size" + check_buf_size 3 "== $buf1size" + + log_test "PFC: Cable length 0" + + RET=0 + + dcb pfc set dev $swp delay 1000 + + check_buf_size 0 "== $buf0size" + check_buf_size 1 "> $buf1size" + check_buf_size 2 "> $buf1size" + check_buf_size 3 "> $buf1size" + + log_test "PFC: Cable length 1000" + + RET=0 + + dcb pfc set dev $swp prio-pfc all:off delay 0 + dcb ets set dev $swp prio-tc all:0 + + check_prio_pg "0 0 0 0 0 0 0 0 " + check_prio_tc "0 0 0 0 0 0 0 0 " + check_buf_size 0 "> 0" + check_buf_size 1 "== 0" + check_buf_size 2 "== 0" + check_buf_size 3 "== 0" + check_buf_size 4 "== 0" + check_buf_size 5 "== 0" + check_buf_size 6 "== 0" + check_buf_size 7 "== 0" + + log_test "PFC: Restore defaults" +} + +test_tc_priomap() +{ + RET=0 + + dcb ets set dev $swp prio-tc 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7 + check_prio_pg "0 1 2 3 4 5 6 7 " + + tc qdisc replace dev $swp root handle 1: bfifo limit 1.5M + check_prio_pg "0 0 0 0 0 0 0 0 " + + dcb buffer set dev $swp prio-buffer 0:1 1:3 2:5 3:7 4:0 5:2 6:4 7:6 + check_prio_pg "1 3 5 7 0 2 4 6 " + + tc qdisc delete dev $swp root + check_prio_pg "0 1 2 3 4 5 6 7 " + + # Clean up. + tc qdisc replace dev $swp root handle 1: bfifo limit 1.5M + dcb buffer set dev $swp prio-buffer all:0 + tc qdisc delete dev $swp root + dcb ets set dev $swp prio-tc all:0 + + log_test "TC: priomap" +} + +test_tc_sizes() +{ + local cell_size=$(devlink_cell_size_get) + local size=$((cell_size * 1000)) + + RET=0 + + dcb buffer set dev $swp buffer-size all:0 0:$size 2>/dev/null + check_fail $? "buffer_size should fail before qdisc is added" + + tc qdisc replace dev $swp root handle 1: bfifo limit 1.5M + + dcb buffer set dev $swp buffer-size all:0 0:$size + check_err $? "buffer_size should pass after qdisc is added" + check_buf_size 0 "== $size" "set size: " + + mtu_set $swp 6000 + check_buf_size 0 "== $size" "set MTU: " + mtu_restore $swp + + dcb buffer set dev $swp buffer-size all:0 + + # After replacing the qdisc for the same kind, buffer_size still has to + # work. + tc qdisc replace dev $swp root handle 1: bfifo limit 1M + + dcb buffer set dev $swp buffer-size all:0 0:$size + check_buf_size 0 "== $size" "post replace, set size: " + + dcb buffer set dev $swp buffer-size all:0 + + # Likewise after replacing for a different kind. + tc qdisc replace dev $swp root handle 2: prio bands 8 + + dcb buffer set dev $swp buffer-size all:0 0:$size + check_buf_size 0 "== $size" "post replace different kind, set size: " + + tc qdisc delete dev $swp root + + dcb buffer set dev $swp buffer-size all:0 0:$size 2>/dev/null + check_fail $? "buffer_size should fail after qdisc is deleted" + + log_test "TC: buffer size" +} + +test_int_buf() +{ + local what=$1; shift + + RET=0 + + local buf0size=$(get_buf_size 0) + local tot_size=$(get_tot_size) + + # Size of internal buffer and buffer 9. + local dsize=$((tot_size - buf0size)) + + tc qdisc add dev $swp clsact + tc filter add dev $swp egress matchall skip_sw action mirred egress mirror dev $swp + + local buf0size_2=$(get_buf_size 0) + local tot_size_2=$(get_tot_size) + local dsize_2=$((tot_size_2 - buf0size_2)) + + # Egress SPAN should have added to the "invisible" buffer configuration. + ((dsize_2 > dsize)) + check_err $? "Invisible buffers account for '$dsize_2', expected '> $dsize'" + + mtu_set $swp 3000 + + local buf0size_3=$(get_buf_size 0) + local tot_size_3=$(get_tot_size) + local dsize_3=$((tot_size_3 - buf0size_3)) + + # MTU change might change buffer 0, which will show at total, but the + # hidden buffers should stay the same size. + ((dsize_3 == dsize_2)) + check_err $? "MTU change: Invisible buffers account for '$dsize_3', expected '== $dsize_2'" + + mtu_restore $swp + tc qdisc del dev $swp clsact + + # After SPAN removal, hidden buffers should be back to the original sizes. + local buf0size_4=$(get_buf_size 0) + local tot_size_4=$(get_tot_size) + local dsize_4=$((tot_size_4 - buf0size_4)) + ((dsize_4 == dsize)) + check_err $? "SPAN removed: Invisible buffers account for '$dsize_4', expected '== $dsize'" + + log_test "${what}internal buffer size" +} + +test_tc_int_buf() +{ + local cell_size=$(devlink_cell_size_get) + local size=$((cell_size * 1000)) + + tc qdisc replace dev $swp root handle 1: bfifo limit 1.5M + test_int_buf "TC: " + + dcb buffer set dev $swp buffer-size all:0 0:$size + test_int_buf "TC+buffsize: " + + dcb buffer set dev $swp buffer-size all:0 + tc qdisc delete dev $swp root +} + +bail_on_lldpad + +trap cleanup EXIT +setup_wait +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/qos_lib.sh b/tools/testing/selftests/drivers/net/mlxsw/qos_lib.sh new file mode 100644 index 000000000..faa51012c --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/qos_lib.sh @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: GPL-2.0 + +check_rate() +{ + local rate=$1; shift + local min=$1; shift + local what=$1; shift + + if ((rate > min)); then + return 0 + fi + + echo "$what $(humanize $ir) < $(humanize $min)" > /dev/stderr + return 1 +} + +measure_rate() +{ + local sw_in=$1; shift # Where the traffic ingresses the switch + local host_in=$1; shift # Where it ingresses another host + local counter=$1; shift # Counter to use for measurement + local what=$1; shift + + local interval=10 + local i + local ret=0 + + # Dips in performance might cause momentary ingress rate to drop below + # 1Gbps. That wouldn't saturate egress and MC would thus get through, + # seemingly winning bandwidth on account of UC. Demand at least 2Gbps + # average ingress rate to somewhat mitigate this. + local min_ingress=2147483648 + + for i in {5..0}; do + local t0=$(ethtool_stats_get $host_in $counter) + local u0=$(ethtool_stats_get $sw_in $counter) + sleep $interval + local t1=$(ethtool_stats_get $host_in $counter) + local u1=$(ethtool_stats_get $sw_in $counter) + + local ir=$(rate $u0 $u1 $interval) + local er=$(rate $t0 $t1 $interval) + + if check_rate $ir $min_ingress "$what ingress rate"; then + break + fi + + # Fail the test if we can't get the throughput. + if ((i == 0)); then + ret=1 + fi + done + + echo $ir $er + return $ret +} + +bail_on_lldpad() +{ + if systemctl is-active --quiet lldpad; then + + cat >/dev/stderr <<-EOF + WARNING: lldpad is running + + lldpad will likely configure DCB, and this test will + configure Qdiscs. mlxsw does not support both at the + same time, one of them is arbitrarily going to overwrite + the other. That will cause spurious failures (or, + unlikely, passes) of this test. + EOF + + if [[ -z $ALLOW_LLDPAD ]]; then + cat >/dev/stderr <<-EOF + + If you want to run the test anyway, please set + an environment variable ALLOW_LLDPAD to a + non-empty string. + EOF + exit 1 + else + return + fi + fi +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/qos_max_descriptors.sh b/tools/testing/selftests/drivers/net/mlxsw/qos_max_descriptors.sh new file mode 100755 index 000000000..5ac4f795e --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/qos_max_descriptors.sh @@ -0,0 +1,282 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# This test sends many small packets (size is less than cell size) through the +# switch. A shaper is used in $swp2, so the traffic is limited there. Packets +# are queued till they will be sent. +# +# The idea is to verify that the switch can handle at least 85% of maximum +# supported descrpitors by hardware. Then, we verify that the driver configures +# firmware to allow infinite size of egress descriptor pool, and does not use a +# lower limitation. Increase the size of the relevant pools such that the pool's +# size does not limit the traffic. + +# +-----------------------+ +# | H1 | +# | + $h1.111 | +# | | 192.0.2.33/28 | +# | | | +# | + $h1 | +# +---|-------------------+ +# | +# +---|-----------------------------+ +# | + $swp1 | +# | | iPOOL1 | +# | | | +# | +-|------------------------+ | +# | | + $swp1.111 | | +# | | | | +# | | BR1 | | +# | | | | +# | | + $swp2.111 | | +# | +-|------------------------+ | +# | | | +# | + $swp2 | +# | | ePOOL6 | +# | | 1mbit | +# +---+-----------------------------+ +# | +# +---|-------------------+ +# | + $h2 H2 | +# | | | +# | + $h2.111 | +# | 192.0.2.34/28 | +# +-----------------------+ +# + +ALL_TESTS=" + ping_ipv4 + max_descriptors +" + +lib_dir=$(dirname $0)/../../../net/forwarding + +NUM_NETIFS=4 +source $lib_dir/lib.sh +source $lib_dir/devlink_lib.sh +source mlxsw_lib.sh + +MAX_POOL_SIZE=$(devlink_pool_size_get) +SHAPER_RATE=1mbit + +# The current TBF qdisc interface does not allow us to configure the shaper to +# flat zero. The ASIC shaper is guaranteed to work with a granularity of +# 200Mbps. On Spectrum-2, writing a value close to zero instead of zero works +# well, but the performance on Spectrum-1 is unpredictable. Thus, do not run the +# test on Spectrum-1. +mlxsw_only_on_spectrum 2+ || exit + +h1_create() +{ + simple_if_init $h1 + + vlan_create $h1 111 v$h1 192.0.2.33/28 + ip link set dev $h1.111 type vlan egress-qos-map 0:1 +} + +h1_destroy() +{ + vlan_destroy $h1 111 + + simple_if_fini $h1 +} + +h2_create() +{ + simple_if_init $h2 + + vlan_create $h2 111 v$h2 192.0.2.34/28 +} + +h2_destroy() +{ + vlan_destroy $h2 111 + + simple_if_fini $h2 +} + +switch_create() +{ + # pools + # ----- + + devlink_pool_size_thtype_save 1 + devlink_pool_size_thtype_save 6 + + devlink_port_pool_th_save $swp1 1 + devlink_port_pool_th_save $swp2 6 + + devlink_tc_bind_pool_th_save $swp1 1 ingress + devlink_tc_bind_pool_th_save $swp2 1 egress + + devlink_pool_size_thtype_set 1 dynamic $MAX_POOL_SIZE + devlink_pool_size_thtype_set 6 static $MAX_POOL_SIZE + + # $swp1 + # ----- + + ip link set dev $swp1 up + vlan_create $swp1 111 + ip link set dev $swp1.111 type vlan ingress-qos-map 0:0 1:1 + + devlink_port_pool_th_set $swp1 1 16 + devlink_tc_bind_pool_th_set $swp1 1 ingress 1 16 + + tc qdisc replace dev $swp1 root handle 1: \ + ets bands 8 strict 8 priomap 7 6 + dcb buffer set dev $swp1 prio-buffer all:0 1:1 + + # $swp2 + # ----- + + ip link set dev $swp2 up + vlan_create $swp2 111 + ip link set dev $swp2.111 type vlan egress-qos-map 0:0 1:1 + + devlink_port_pool_th_set $swp2 6 $MAX_POOL_SIZE + devlink_tc_bind_pool_th_set $swp2 1 egress 6 $MAX_POOL_SIZE + + tc qdisc replace dev $swp2 root handle 1: tbf rate $SHAPER_RATE \ + burst 128K limit 500M + tc qdisc replace dev $swp2 parent 1:1 handle 11: \ + ets bands 8 strict 8 priomap 7 6 + + # bridge + # ------ + + ip link add name br1 type bridge vlan_filtering 0 + ip link set dev $swp1.111 master br1 + ip link set dev br1 up + + ip link set dev $swp2.111 master br1 +} + +switch_destroy() +{ + # Do this first so that we can reset the limits to values that are only + # valid for the original static / dynamic setting. + devlink_pool_size_thtype_restore 6 + devlink_pool_size_thtype_restore 1 + + # bridge + # ------ + + ip link set dev $swp2.111 nomaster + + ip link set dev br1 down + ip link set dev $swp1.111 nomaster + ip link del dev br1 + + # $swp2 + # ----- + + tc qdisc del dev $swp2 parent 1:1 handle 11: + tc qdisc del dev $swp2 root + + devlink_tc_bind_pool_th_restore $swp2 1 egress + devlink_port_pool_th_restore $swp2 6 + + vlan_destroy $swp2 111 + ip link set dev $swp2 down + + # $swp1 + # ----- + + dcb buffer set dev $swp1 prio-buffer all:0 + tc qdisc del dev $swp1 root + + devlink_tc_bind_pool_th_restore $swp1 1 ingress + devlink_port_pool_th_restore $swp1 1 + + vlan_destroy $swp1 111 + ip link set dev $swp1 down +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + h2mac=$(mac_get $h2) + + vrf_prepare + + h1_create + h2_create + switch_create +} + +cleanup() +{ + pre_cleanup + + switch_destroy + h2_destroy + h1_destroy + + vrf_cleanup +} + +ping_ipv4() +{ + ping_test $h1 192.0.2.34 " h1->h2" +} + +percentage_used() +{ + local num_packets=$1; shift + local max_packets=$1; shift + + bc <<< " + scale=2 + 100 * $num_packets / $max_packets + " +} + +max_descriptors() +{ + local cell_size=$(devlink_cell_size_get) + local exp_perc_used=85 + local max_descriptors + local pktsize=30 + + RET=0 + + max_descriptors=$(mlxsw_max_descriptors_get) || exit 1 + + local d0=$(ethtool_stats_get $swp2 tc_no_buffer_discard_uc_tc_1) + + log_info "Send many small packets, packet size = $pktsize bytes" + start_traffic_pktsize $pktsize $h1.111 192.0.2.33 192.0.2.34 $h2mac + + # Sleep to wait for congestion. + sleep 5 + + local d1=$(ethtool_stats_get $swp2 tc_no_buffer_discard_uc_tc_1) + ((d1 == d0)) + check_err $? "Drops seen on egress port: $d0 -> $d1 ($((d1 - d0)))" + + # Check how many packets the switch can handle, the limitation is + # maximum descriptors. + local pkts_bytes=$(ethtool_stats_get $swp2 tc_transmit_queue_tc_1) + local pkts_num=$((pkts_bytes / cell_size)) + local perc_used=$(percentage_used $pkts_num $max_descriptors) + + check_err $(bc <<< "$perc_used < $exp_perc_used") \ + "Expected > $exp_perc_used% of descriptors, handle $perc_used%" + + stop_traffic + sleep 1 + + log_test "Maximum descriptors usage. The percentage used is $perc_used%" +} + +trap cleanup EXIT +setup_prepare +setup_wait +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/qos_mc_aware.sh b/tools/testing/selftests/drivers/net/mlxsw/qos_mc_aware.sh new file mode 100755 index 000000000..c8e55fa91 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/qos_mc_aware.sh @@ -0,0 +1,342 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# A test for switch behavior under MC overload. An issue in Spectrum chips +# causes throughput of UC traffic to drop severely when a switch is under heavy +# MC load. This issue can be overcome by putting the switch to MC-aware mode. +# This test verifies that UC performance stays intact even as the switch is +# under MC flood, and therefore that the MC-aware mode is enabled and correctly +# configured. +# +# Because mlxsw throttles CPU port, the traffic can't actually reach userspace +# at full speed. That makes it impossible to use iperf3 to simply measure the +# throughput, because many packets (that reach $h3) don't get to the kernel at +# all even in UDP mode (the situation is even worse in TCP mode, where one can't +# hope to see more than a couple Mbps). +# +# So instead we send traffic with mausezahn and use RX ethtool counters at $h3. +# Multicast traffic is untagged, unicast traffic is tagged with PCP 1. Therefore +# each gets a different priority and we can use per-prio ethtool counters to +# measure the throughput. In order to avoid prioritizing unicast traffic, prio +# qdisc is installed on $swp3 and maps all priorities to the same band #7 (and +# thus TC 0). +# +# Mausezahn can't actually saturate the links unless it's using large frames. +# Thus we set MTU to 10K on all involved interfaces. Then both unicast and +# multicast traffic uses 8K frames. +# +# +---------------------------+ +----------------------------------+ +# | H1 | | H2 | +# | | | unicast --> + $h2.111 | +# | multicast | | traffic | 192.0.2.129/28 | +# | traffic | | | e-qos-map 0:1 | +# | $h1 + <----- | | | | +# | 192.0.2.65/28 | | | + $h2 | +# +---------------|-----------+ +--------------|-------------------+ +# | | +# +---------------|---------------------------------------|-------------------+ +# | $swp1 + + $swp2 | +# | >1Gbps | | >1Gbps | +# | +-------------|------+ +----------|----------------+ | +# | | $swp1.1 + | | + $swp2.111 | | +# | | BR1 | SW | BR111 | | +# | | $swp3.1 + | | + $swp3.111 | | +# | +-------------|------+ +----------|----------------+ | +# | \_______________________________________/ | +# | | | +# | + $swp3 | +# | | 1Gbps bottleneck | +# | | prio qdisc: {0..7} -> 7 | +# +------------------------------------|--------------------------------------+ +# | +# +--|-----------------+ +# | + $h3 H3 | +# | | 192.0.2.66/28 | +# | | | +# | + $h3.111 | +# | 192.0.2.130/28 | +# +--------------------+ + +ALL_TESTS=" + ping_ipv4 + test_mc_aware + test_uc_aware +" + +lib_dir=$(dirname $0)/../../../net/forwarding + +NUM_NETIFS=6 +source $lib_dir/lib.sh +source $lib_dir/devlink_lib.sh +source qos_lib.sh + +h1_create() +{ + simple_if_init $h1 192.0.2.65/28 + mtu_set $h1 10000 +} + +h1_destroy() +{ + mtu_restore $h1 + simple_if_fini $h1 192.0.2.65/28 +} + +h2_create() +{ + simple_if_init $h2 + mtu_set $h2 10000 + + vlan_create $h2 111 v$h2 192.0.2.129/28 + ip link set dev $h2.111 type vlan egress-qos-map 0:1 +} + +h2_destroy() +{ + vlan_destroy $h2 111 + + mtu_restore $h2 + simple_if_fini $h2 +} + +h3_create() +{ + simple_if_init $h3 192.0.2.66/28 + mtu_set $h3 10000 + + vlan_create $h3 111 v$h3 192.0.2.130/28 +} + +h3_destroy() +{ + vlan_destroy $h3 111 + + mtu_restore $h3 + simple_if_fini $h3 192.0.2.66/28 +} + +switch_create() +{ + ip link set dev $swp1 up + mtu_set $swp1 10000 + + ip link set dev $swp2 up + mtu_set $swp2 10000 + + ip link set dev $swp3 up + mtu_set $swp3 10000 + + vlan_create $swp2 111 + vlan_create $swp3 111 + + tc qdisc replace dev $swp3 root handle 3: tbf rate 1gbit \ + burst 128K limit 1G + tc qdisc replace dev $swp3 parent 3:3 handle 33: \ + prio bands 8 priomap 7 7 7 7 7 7 7 7 + + ip link add name br1 type bridge vlan_filtering 0 + ip link set dev br1 up + ip link set dev $swp1 master br1 + ip link set dev $swp3 master br1 + + ip link add name br111 type bridge vlan_filtering 0 + ip link set dev br111 up + ip link set dev $swp2.111 master br111 + ip link set dev $swp3.111 master br111 + + # Make sure that ingress quotas are smaller than egress so that there is + # room for both streams of traffic to be admitted to shared buffer. + devlink_port_pool_th_save $swp1 0 + devlink_port_pool_th_set $swp1 0 5 + devlink_tc_bind_pool_th_save $swp1 0 ingress + devlink_tc_bind_pool_th_set $swp1 0 ingress 0 5 + + devlink_port_pool_th_save $swp2 0 + devlink_port_pool_th_set $swp2 0 5 + devlink_tc_bind_pool_th_save $swp2 1 ingress + devlink_tc_bind_pool_th_set $swp2 1 ingress 0 5 + + devlink_port_pool_th_save $swp3 4 + devlink_port_pool_th_set $swp3 4 12 +} + +switch_destroy() +{ + devlink_port_pool_th_restore $swp3 4 + + devlink_tc_bind_pool_th_restore $swp2 1 ingress + devlink_port_pool_th_restore $swp2 0 + + devlink_tc_bind_pool_th_restore $swp1 0 ingress + devlink_port_pool_th_restore $swp1 0 + + ip link del dev br111 + ip link del dev br1 + + tc qdisc del dev $swp3 parent 3:3 handle 33: + tc qdisc del dev $swp3 root handle 3: + + vlan_destroy $swp3 111 + vlan_destroy $swp2 111 + + mtu_restore $swp3 + ip link set dev $swp3 down + + mtu_restore $swp2 + ip link set dev $swp2 down + + mtu_restore $swp1 + ip link set dev $swp1 down +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + swp3=${NETIFS[p5]} + h3=${NETIFS[p6]} + + h3mac=$(mac_get $h3) + + vrf_prepare + + h1_create + h2_create + h3_create + switch_create +} + +cleanup() +{ + pre_cleanup + + switch_destroy + h3_destroy + h2_destroy + h1_destroy + + vrf_cleanup +} + +ping_ipv4() +{ + ping_test $h2 192.0.2.130 +} + +test_mc_aware() +{ + RET=0 + + local -a uc_rate + start_traffic $h2.111 192.0.2.129 192.0.2.130 $h3mac + uc_rate=($(measure_rate $swp2 $h3 rx_octets_prio_1 "UC-only")) + check_err $? "Could not get high enough UC-only ingress rate" + stop_traffic + local ucth1=${uc_rate[1]} + + start_traffic $h1 192.0.2.65 bc bc + + local d0=$(date +%s) + local t0=$(ethtool_stats_get $h3 rx_octets_prio_0) + local u0=$(ethtool_stats_get $swp1 rx_octets_prio_0) + + local -a uc_rate_2 + start_traffic $h2.111 192.0.2.129 192.0.2.130 $h3mac + uc_rate_2=($(measure_rate $swp2 $h3 rx_octets_prio_1 "UC+MC")) + check_err $? "Could not get high enough UC+MC ingress rate" + stop_traffic + local ucth2=${uc_rate_2[1]} + + local d1=$(date +%s) + local t1=$(ethtool_stats_get $h3 rx_octets_prio_0) + local u1=$(ethtool_stats_get $swp1 rx_octets_prio_0) + + local deg=$(bc <<< " + scale=2 + ret = 100 * ($ucth1 - $ucth2) / $ucth1 + if (ret > 0) { ret } else { 0 } + ") + + # Minimum shaper of 200Mbps on MC TCs should cause about 20% of + # degradation on 1Gbps link. + check_err $(bc <<< "$deg < 15") "Minimum shaper not in effect" + check_err $(bc <<< "$deg > 25") "MC traffic degrades UC performance too much" + + local interval=$((d1 - d0)) + local mc_ir=$(rate $u0 $u1 $interval) + local mc_er=$(rate $t0 $t1 $interval) + + stop_traffic + + log_test "UC performance under MC overload" + + echo "UC-only throughput $(humanize $ucth1)" + echo "UC+MC throughput $(humanize $ucth2)" + echo "Degradation $deg %" + echo + echo "Full report:" + echo " UC only:" + echo " ingress UC throughput $(humanize ${uc_rate[0]})" + echo " egress UC throughput $(humanize ${uc_rate[1]})" + echo " UC+MC:" + echo " ingress UC throughput $(humanize ${uc_rate_2[0]})" + echo " egress UC throughput $(humanize ${uc_rate_2[1]})" + echo " ingress MC throughput $(humanize $mc_ir)" + echo " egress MC throughput $(humanize $mc_er)" + echo +} + +test_uc_aware() +{ + RET=0 + + start_traffic $h2.111 192.0.2.129 192.0.2.130 $h3mac + + local d0=$(date +%s) + local t0=$(ethtool_stats_get $h3 rx_octets_prio_1) + local u0=$(ethtool_stats_get $swp2 rx_octets_prio_1) + sleep 1 + + local attempts=50 + local passes=0 + local i + + for ((i = 0; i < attempts; ++i)); do + if $ARPING -c 1 -I $h1 -b 192.0.2.66 -q -w 1; then + ((passes++)) + fi + + sleep 0.1 + done + + local d1=$(date +%s) + local t1=$(ethtool_stats_get $h3 rx_octets_prio_1) + local u1=$(ethtool_stats_get $swp2 rx_octets_prio_1) + + local interval=$((d1 - d0)) + local uc_ir=$(rate $u0 $u1 $interval) + local uc_er=$(rate $t0 $t1 $interval) + + ((attempts == passes)) + check_err $? + + stop_traffic + + log_test "MC performance under UC overload" + echo " ingress UC throughput $(humanize ${uc_ir})" + echo " egress UC throughput $(humanize ${uc_er})" + echo " sent $attempts BC ARPs, got $passes responses" +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/qos_pfc.sh b/tools/testing/selftests/drivers/net/mlxsw/qos_pfc.sh new file mode 100755 index 000000000..6a3002fbc --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/qos_pfc.sh @@ -0,0 +1,419 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# This test injects a 10-MB burst of traffic with VLAN tag and 802.1p priority +# of 1. This stream is consistently prioritized as priority 1, is put to PG +# buffer 1, and scheduled at TC 1. +# +# - the stream first ingresses through $swp1, where it is forwarded to $swp3 +# +# - then it ingresses through $swp4. Here it is put to a lossless buffer and put +# to a small pool ("PFC pool"). The traffic is forwarded to $swp2, which is +# shaped, and thus the PFC pool eventually fills, therefore the headroom +# fills, and $swp3 is paused. +# +# - since $swp3 now can't send traffic, the traffic ingressing $swp1 is kept at +# a pool ("overflow pool"). The overflow pool needs to be large enough to +# contain the whole burst. +# +# - eventually the PFC pool gets some traffic out, headroom therefore gets some +# traffic to the pool, and $swp3 is unpaused again. This way the traffic is +# gradually forwarded from the overflow pool, through the PFC pool, out of +# $swp2, and eventually to $h2. +# +# - if PFC works, all lossless flow packets that ingress through $swp1 should +# also be seen ingressing $h2. If it doesn't, there will be drops due to +# discrepancy between the speeds of $swp1 and $h2. +# +# - it should all play out relatively quickly, so that SLL and HLL will not +# cause drops. +# +# +-----------------------+ +# | H1 | +# | + $h1.111 | +# | | 192.0.2.33/28 | +# | | | +# | + $h1 | +# +---|-------------------+ +--------------------+ +# | | | +# +---|----------------------|--------------------|---------------------------+ +# | + $swp1 $swp3 + + $swp4 | +# | | iPOOL1 iPOOL0 | | iPOOL2 | +# | | ePOOL4 ePOOL5 | | ePOOL4 | +# | | 1Gbps | | 1Gbps | +# | | PFC:enabled=1 | | PFC:enabled=1 | +# | +-|----------------------|-+ +-|------------------------+ | +# | | + $swp1.111 $swp3.111 + | | + $swp4.111 | | +# | | | | | | +# | | BR1 | | BR2 | | +# | | | | | | +# | | | | + $swp2.111 | | +# | +--------------------------+ +---------|----------------+ | +# | | | +# | iPOOL0: 500KB dynamic | | +# | iPOOL1: 10MB static | | +# | iPOOL2: 1MB static + $swp2 | +# | ePOOL4: 500KB dynamic | iPOOL0 | +# | ePOOL5: 10MB static | ePOOL6 | +# | ePOOL6: "infinite" static | 200Mbps shaper | +# +-------------------------------------------------------|-------------------+ +# | +# +---|-------------------+ +# | + $h2 H2 | +# | | | +# | + $h2.111 | +# | 192.0.2.34/28 | +# +-----------------------+ +# +# iPOOL0+ePOOL4 is a helper pool for control traffic etc. +# iPOOL1+ePOOL5 are overflow pools. +# iPOOL2+ePOOL6 are PFC pools. + +ALL_TESTS=" + ping_ipv4 + test_qos_pfc +" + +lib_dir=$(dirname $0)/../../../net/forwarding + +NUM_NETIFS=6 +source $lib_dir/lib.sh +source $lib_dir/devlink_lib.sh +source qos_lib.sh + +_1KB=1000 +_100KB=$((100 * _1KB)) +_500KB=$((500 * _1KB)) +_1MB=$((1000 * _1KB)) +_10MB=$((10 * _1MB)) + +h1_create() +{ + simple_if_init $h1 + mtu_set $h1 10000 + + vlan_create $h1 111 v$h1 192.0.2.33/28 +} + +h1_destroy() +{ + vlan_destroy $h1 111 + + mtu_restore $h1 + simple_if_fini $h1 +} + +h2_create() +{ + simple_if_init $h2 + mtu_set $h2 10000 + + vlan_create $h2 111 v$h2 192.0.2.34/28 +} + +h2_destroy() +{ + vlan_destroy $h2 111 + + mtu_restore $h2 + simple_if_fini $h2 +} + +switch_create() +{ + local lanes_swp4 + local pg1_size + + # pools + # ----- + + devlink_pool_size_thtype_save 0 + devlink_pool_size_thtype_save 4 + devlink_pool_size_thtype_save 1 + devlink_pool_size_thtype_save 5 + devlink_pool_size_thtype_save 2 + devlink_pool_size_thtype_save 6 + + devlink_port_pool_th_save $swp1 1 + devlink_port_pool_th_save $swp2 6 + devlink_port_pool_th_save $swp3 5 + devlink_port_pool_th_save $swp4 2 + + devlink_tc_bind_pool_th_save $swp1 1 ingress + devlink_tc_bind_pool_th_save $swp2 1 egress + devlink_tc_bind_pool_th_save $swp3 1 egress + devlink_tc_bind_pool_th_save $swp4 1 ingress + + # Control traffic pools. Just reduce the size. Keep them dynamic so that + # we don't need to change all the uninteresting quotas. + devlink_pool_size_thtype_set 0 dynamic $_500KB + devlink_pool_size_thtype_set 4 dynamic $_500KB + + # Overflow pools. + devlink_pool_size_thtype_set 1 static $_10MB + devlink_pool_size_thtype_set 5 static $_10MB + + # PFC pools. As per the writ, the size of egress PFC pool should be + # infinice, but actually it just needs to be large enough to not matter + # in practice, so reuse the 10MB limit. + devlink_pool_size_thtype_set 2 static $_1MB + devlink_pool_size_thtype_set 6 static $_10MB + + # $swp1 + # ----- + + ip link set dev $swp1 up + mtu_set $swp1 10000 + vlan_create $swp1 111 + ip link set dev $swp1.111 type vlan ingress-qos-map 0:0 1:1 + + devlink_port_pool_th_set $swp1 1 $_10MB + devlink_tc_bind_pool_th_set $swp1 1 ingress 1 $_10MB + + # Configure qdisc so that we can configure PG and therefore pool + # assignment. + tc qdisc replace dev $swp1 root handle 1: \ + ets bands 8 strict 8 priomap 7 6 + dcb buffer set dev $swp1 prio-buffer all:0 1:1 + + # $swp2 + # ----- + + ip link set dev $swp2 up + mtu_set $swp2 10000 + vlan_create $swp2 111 + ip link set dev $swp2.111 type vlan egress-qos-map 0:0 1:1 + + devlink_port_pool_th_set $swp2 6 $_10MB + devlink_tc_bind_pool_th_set $swp2 1 egress 6 $_10MB + + # prio 0->TC0 (band 7), 1->TC1 (band 6). TC1 is shaped. + tc qdisc replace dev $swp2 root handle 1: \ + ets bands 8 strict 8 priomap 7 6 + tc qdisc replace dev $swp2 parent 1:7 handle 17: \ + tbf rate 200Mbit burst 131072 limit 1M + + # $swp3 + # ----- + + ip link set dev $swp3 up + mtu_set $swp3 10000 + vlan_create $swp3 111 + ip link set dev $swp3.111 type vlan egress-qos-map 0:0 1:1 + + devlink_port_pool_th_set $swp3 5 $_10MB + devlink_tc_bind_pool_th_set $swp3 1 egress 5 $_10MB + + # prio 0->TC0 (band 7), 1->TC1 (band 6) + tc qdisc replace dev $swp3 root handle 1: \ + ets bands 8 strict 8 priomap 7 6 + + # Need to enable PFC so that PAUSE takes effect. Therefore need to put + # the lossless prio into a buffer of its own. Don't bother with buffer + # sizes though, there is not going to be any pressure in the "backward" + # direction. + dcb buffer set dev $swp3 prio-buffer all:0 1:1 + dcb pfc set dev $swp3 prio-pfc all:off 1:on + + # $swp4 + # ----- + + ip link set dev $swp4 up + mtu_set $swp4 10000 + vlan_create $swp4 111 + ip link set dev $swp4.111 type vlan ingress-qos-map 0:0 1:1 + + devlink_port_pool_th_set $swp4 2 $_1MB + devlink_tc_bind_pool_th_set $swp4 1 ingress 2 $_1MB + + # Configure qdisc so that we can hand-tune headroom. + tc qdisc replace dev $swp4 root handle 1: \ + ets bands 8 strict 8 priomap 7 6 + dcb buffer set dev $swp4 prio-buffer all:0 1:1 + dcb pfc set dev $swp4 prio-pfc all:off 1:on + # PG0 will get autoconfigured to Xoff, give PG1 arbitrarily 100K, which + # is (-2*MTU) about 80K of delay provision. + pg1_size=$_100KB + + setup_wait_dev_with_timeout $swp4 + + lanes_swp4=$(ethtool $swp4 | grep 'Lanes:') + lanes_swp4=${lanes_swp4#*"Lanes: "} + + # 8-lane ports use two buffers among which the configured buffer + # is split, so double the size to get twice (20K + 80K). + if [[ $lanes_swp4 -eq 8 ]]; then + pg1_size=$((pg1_size * 2)) + fi + + dcb buffer set dev $swp4 buffer-size all:0 1:$pg1_size + + # bridges + # ------- + + ip link add name br1 type bridge vlan_filtering 0 + ip link set dev $swp1.111 master br1 + ip link set dev $swp3.111 master br1 + ip link set dev br1 up + + ip link add name br2 type bridge vlan_filtering 0 + ip link set dev $swp2.111 master br2 + ip link set dev $swp4.111 master br2 + ip link set dev br2 up +} + +switch_destroy() +{ + # Do this first so that we can reset the limits to values that are only + # valid for the original static / dynamic setting. + devlink_pool_size_thtype_restore 6 + devlink_pool_size_thtype_restore 5 + devlink_pool_size_thtype_restore 4 + devlink_pool_size_thtype_restore 2 + devlink_pool_size_thtype_restore 1 + devlink_pool_size_thtype_restore 0 + + # bridges + # ------- + + ip link set dev br2 down + ip link set dev $swp4.111 nomaster + ip link set dev $swp2.111 nomaster + ip link del dev br2 + + ip link set dev br1 down + ip link set dev $swp3.111 nomaster + ip link set dev $swp1.111 nomaster + ip link del dev br1 + + # $swp4 + # ----- + + dcb buffer set dev $swp4 buffer-size all:0 + dcb pfc set dev $swp4 prio-pfc all:off + dcb buffer set dev $swp4 prio-buffer all:0 + tc qdisc del dev $swp4 root + + devlink_tc_bind_pool_th_restore $swp4 1 ingress + devlink_port_pool_th_restore $swp4 2 + + vlan_destroy $swp4 111 + mtu_restore $swp4 + ip link set dev $swp4 down + + # $swp3 + # ----- + + dcb pfc set dev $swp3 prio-pfc all:off + dcb buffer set dev $swp3 prio-buffer all:0 + tc qdisc del dev $swp3 root + + devlink_tc_bind_pool_th_restore $swp3 1 egress + devlink_port_pool_th_restore $swp3 5 + + vlan_destroy $swp3 111 + mtu_restore $swp3 + ip link set dev $swp3 down + + # $swp2 + # ----- + + tc qdisc del dev $swp2 parent 1:7 + tc qdisc del dev $swp2 root + + devlink_tc_bind_pool_th_restore $swp2 1 egress + devlink_port_pool_th_restore $swp2 6 + + vlan_destroy $swp2 111 + mtu_restore $swp2 + ip link set dev $swp2 down + + # $swp1 + # ----- + + dcb buffer set dev $swp1 prio-buffer all:0 + tc qdisc del dev $swp1 root + + devlink_tc_bind_pool_th_restore $swp1 1 ingress + devlink_port_pool_th_restore $swp1 1 + + vlan_destroy $swp1 111 + mtu_restore $swp1 + ip link set dev $swp1 down +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + swp3=${NETIFS[p5]} + swp4=${NETIFS[p6]} + + h2mac=$(mac_get $h2) + + vrf_prepare + + h1_create + h2_create + switch_create +} + +cleanup() +{ + pre_cleanup + + switch_destroy + h2_destroy + h1_destroy + + vrf_cleanup +} + +ping_ipv4() +{ + ping_test $h1 192.0.2.34 +} + +test_qos_pfc() +{ + RET=0 + + # 10M pool, each packet is 8K of payload + headers + local pkts=$((_10MB / 8050)) + local size=$((pkts * 8050)) + local in0=$(ethtool_stats_get $swp1 rx_octets_prio_1) + local out0=$(ethtool_stats_get $swp2 tx_octets_prio_1) + + $MZ $h1 -p 8000 -Q 1:111 -A 192.0.2.33 -B 192.0.2.34 \ + -a own -b $h2mac -c $pkts -t udp -q + sleep 2 + + local in1=$(ethtool_stats_get $swp1 rx_octets_prio_1) + local out1=$(ethtool_stats_get $swp2 tx_octets_prio_1) + + local din=$((in1 - in0)) + local dout=$((out1 - out0)) + + local pct_in=$((din * 100 / size)) + + ((pct_in > 95 && pct_in < 105)) + check_err $? "Relative ingress out of expected bounds, $pct_in% should be 100%" + + ((dout == din)) + check_err $? "$((din - dout)) bytes out of $din ingressed got lost" + + log_test "PFC" +} + +bail_on_lldpad + +trap cleanup EXIT +setup_prepare +setup_wait +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/rif_counter_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/rif_counter_scale.sh new file mode 100644 index 000000000..a43a9926e --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/rif_counter_scale.sh @@ -0,0 +1,107 @@ +# SPDX-License-Identifier: GPL-2.0 + +RIF_COUNTER_NUM_NETIFS=2 + +rif_counter_addr4() +{ + local i=$1; shift + local p=$1; shift + + printf 192.0.%d.%d $((i / 64)) $(((4 * i % 256) + p)) +} + +rif_counter_addr4pfx() +{ + rif_counter_addr4 $@ + printf /30 +} + +rif_counter_h1_create() +{ + simple_if_init $h1 +} + +rif_counter_h1_destroy() +{ + simple_if_fini $h1 +} + +rif_counter_h2_create() +{ + simple_if_init $h2 +} + +rif_counter_h2_destroy() +{ + simple_if_fini $h2 +} + +rif_counter_setup_prepare() +{ + h1=${NETIFS[p1]} + h2=${NETIFS[p2]} + + vrf_prepare + + rif_counter_h1_create + rif_counter_h2_create +} + +rif_counter_cleanup() +{ + local count=$1; shift + + pre_cleanup + + for ((i = 1; i <= count; i++)); do + vlan_destroy $h2 $i + done + + rif_counter_h2_destroy + rif_counter_h1_destroy + + vrf_cleanup + + if [[ -v RIF_COUNTER_BATCH_FILE ]]; then + rm -f $RIF_COUNTER_BATCH_FILE + fi +} + + +rif_counter_test() +{ + local count=$1; shift + local should_fail=$1; shift + + RIF_COUNTER_BATCH_FILE="$(mktemp)" + + for ((i = 1; i <= count; i++)); do + vlan_create $h2 $i v$h2 $(rif_counter_addr4pfx $i 2) + done + for ((i = 1; i <= count; i++)); do + cat >> $RIF_COUNTER_BATCH_FILE <<-EOF + stats set dev $h2.$i l3_stats on + EOF + done + + ip -b $RIF_COUNTER_BATCH_FILE + check_err_fail $should_fail $? "RIF counter enablement" +} + +rif_counter_traffic_test() +{ + local count=$1; shift + local i; + + for ((i = count; i > 0; i /= 2)); do + $MZ $h1 -Q $i -c 1 -d 20msec -p 100 -a own -b $(mac_get $h2) \ + -A $(rif_counter_addr4 $i 1) \ + -B $(rif_counter_addr4 $i 2) \ + -q -t udp sp=54321,dp=12345 + done + for ((i = count; i > 0; i /= 2)); do + busywait "$TC_HIT_TIMEOUT" until_counter_is "== 1" \ + hw_stats_get l3_stats $h2.$i rx packets > /dev/null + check_err $? "Traffic not seen at RIF $h2.$i" + done +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/rif_mac_profile_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/rif_mac_profile_scale.sh new file mode 100644 index 000000000..71e7681f1 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/rif_mac_profile_scale.sh @@ -0,0 +1,72 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Test for RIF MAC profiles resource. The test adds VLAN netdevices according to +# the maximum number of RIF MAC profiles, sets each of them with a random +# MAC address, and checks that eventually the number of occupied RIF MAC +# profiles equals the maximum number of RIF MAC profiles. + + +RIF_MAC_PROFILE_NUM_NETIFS=2 + +rif_mac_profiles_create() +{ + local count=$1; shift + local should_fail=$1; shift + local batch_file="$(mktemp)" + + for ((i = 1; i <= count; i++)); do + vlan=$(( i*10 )) + m=$(( i*11 )) + + cat >> $batch_file <<-EOF + link add link $h1 name $h1.$vlan \ + address 00:$m:$m:$m:$m:$m type vlan id $vlan + address add 192.0.$m.1/24 dev $h1.$vlan + EOF + done + + ip -b $batch_file &> /dev/null + check_err_fail $should_fail $? "RIF creation" + + rm -f $batch_file +} + +rif_mac_profile_test() +{ + local count=$1; shift + local should_fail=$1; shift + + rif_mac_profiles_create $count $should_fail + + occ=$(devlink -j resource show $DEVLINK_DEV \ + | jq '.[][][] | select(.name=="rif_mac_profiles") |.["occ"]') + + [[ $occ -eq $count ]] + check_err_fail $should_fail $? "Attempt to use $count profiles (actual result $occ)" +} + +rif_mac_profile_setup_prepare() +{ + h1=${NETIFS[p1]} + h2=${NETIFS[p2]} + + # Disable IPv6 on the two interfaces to avoid IPv6 link-local addresses + # being generated and RIFs being created. + sysctl_set net.ipv6.conf.$h1.disable_ipv6 1 + sysctl_set net.ipv6.conf.$h2.disable_ipv6 1 + + ip link set $h1 up + ip link set $h2 up +} + +rif_mac_profile_cleanup() +{ + pre_cleanup + + ip link set $h2 down + ip link set $h1 down + + sysctl_restore net.ipv6.conf.$h2.disable_ipv6 + sysctl_restore net.ipv6.conf.$h1.disable_ipv6 +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/rif_mac_profiles.sh b/tools/testing/selftests/drivers/net/mlxsw/rif_mac_profiles.sh new file mode 100755 index 000000000..c18340cee --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/rif_mac_profiles.sh @@ -0,0 +1,213 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + mac_profile_test +" +NUM_NETIFS=4 +source $lib_dir/lib.sh +source $lib_dir/tc_common.sh +source $lib_dir/devlink_lib.sh + +h1_create() +{ + simple_if_init $h1 192.0.2.1/24 + ip route add 198.51.100.0/24 vrf v$h1 nexthop via 192.0.2.2 + + tc qdisc add dev $h1 ingress +} + +h1_destroy() +{ + tc qdisc del dev $h1 ingress + + ip route del 198.51.100.0/24 vrf v$h1 + simple_if_fini $h1 192.0.2.1/24 +} + +h2_create() +{ + simple_if_init $h2 198.51.100.1/24 + ip route add 192.0.2.0/24 vrf v$h2 nexthop via 198.51.100.2 + + tc qdisc add dev $h2 ingress +} + +h2_destroy() +{ + tc qdisc del dev $h2 ingress + + ip route del 192.0.2.0/24 vrf v$h2 + simple_if_fini $h2 198.51.100.1/24 +} + +router_create() +{ + ip link set dev $rp1 up + ip link set dev $rp2 up + + tc qdisc add dev $rp1 clsact + tc qdisc add dev $rp2 clsact + ip address add 192.0.2.2/24 dev $rp1 + ip address add 198.51.100.2/24 dev $rp2 +} + +router_destroy() +{ + ip address del 198.51.100.2/24 dev $rp2 + ip address del 192.0.2.2/24 dev $rp1 + tc qdisc del dev $rp2 clsact + tc qdisc del dev $rp1 clsact + + ip link set dev $rp2 down + ip link set dev $rp1 down +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + rp1=${NETIFS[p2]} + + rp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + vrf_prepare + + h1_create + h2_create + + router_create + + forwarding_enable +} + +cleanup() +{ + pre_cleanup + + forwarding_restore + + router_destroy + + h2_destroy + h1_destroy + + vrf_cleanup +} + +h1_to_h2() +{ + local test_name=$@; shift + local smac=$(mac_get $rp2) + + RET=0 + + # Replace neighbour to avoid first packet being forwarded in software + ip neigh replace dev $rp2 198.51.100.1 lladdr $(mac_get $h2) + + # Add a filter to ensure that packets are forwarded in hardware. Cannot + # match on source MAC because it is not set in eACL after routing + tc filter add dev $rp2 egress proto ip pref 1 handle 101 \ + flower skip_sw ip_proto udp src_port 12345 dst_port 54321 \ + action pass + + # Add a filter to ensure that packets are received with the correct + # source MAC + tc filter add dev $h2 ingress proto ip pref 1 handle 101 \ + flower skip_sw src_mac $smac ip_proto udp src_port 12345 \ + dst_port 54321 action pass + + $MZ $h1 -a own -b $(mac_get $rp1) -t udp "sp=12345,dp=54321" \ + -A 192.0.2.1 -B 198.51.100.1 -c 10 -p 100 -d 1msec -q + + tc_check_packets "dev $rp2 egress" 101 10 + check_err $? "packets not forwarded in hardware" + + tc_check_packets "dev $h2 ingress" 101 10 + check_err $? "packets not forwarded with correct source mac" + + log_test "h1->h2: $test_name" + + tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower + tc filter del dev $rp2 egress protocol ip pref 1 handle 101 flower + ip neigh del dev $rp2 198.51.100.1 lladdr $(mac_get $h2) +} + +h2_to_h1() +{ + local test_name=$@; shift + local rp1_mac=$(mac_get $rp1) + + RET=0 + + ip neigh replace dev $rp1 192.0.2.1 lladdr $(mac_get $h1) + + tc filter add dev $rp1 egress proto ip pref 1 handle 101 \ + flower skip_sw ip_proto udp src_port 54321 dst_port 12345 \ + action pass + + tc filter add dev $h1 ingress proto ip pref 1 handle 101 \ + flower skip_sw src_mac $rp1_mac ip_proto udp src_port 54321 \ + dst_port 12345 action pass + + $MZ $h2 -a own -b $(mac_get $rp2) -t udp "sp=54321,dp=12345" \ + -A 198.51.100.1 -B 192.0.2.1 -c 10 -p 100 -d 1msec -q + + tc_check_packets "dev $rp1 egress" 101 10 + check_err $? "packets not forwarded in hardware" + + tc_check_packets "dev $h1 ingress" 101 10 + check_err $? "packets not forwarded with correct source mac" + + log_test "h2->h1: $test_name" + + tc filter del dev $h1 ingress protocol ip pref 1 handle 101 flower + tc filter del dev $rp1 egress protocol ip pref 1 handle 101 flower + ip neigh del dev $rp1 192.0.2.1 lladdr $(mac_get $h1) +} + +smac_test() +{ + local test_name=$@; shift + + # Test that packets forwarded to $h2 via $rp2 are forwarded with the + # current source MAC of $rp2 + h1_to_h2 $test_name + + # Test that packets forwarded to $h1 via $rp1 are forwarded with the + # current source MAC of $rp1. This MAC is never changed during the test, + # but given the shared nature of MAC profile, the point is to see that + # changes to the MAC of $rp2 do not affect that of $rp1 + h2_to_h1 $test_name +} + +mac_profile_test() +{ + local rp2_mac=$(mac_get $rp2) + + # Test behavior when the RIF backing $rp2 is transitioned to use + # a new MAC profile + ip link set dev $rp2 addr 00:11:22:33:44:55 + smac_test "new mac profile" + + # Test behavior when the MAC profile used by the RIF is edited + ip link set dev $rp2 address 00:22:22:22:22:22 + smac_test "edit mac profile" + + # Restore original MAC + ip link set dev $rp2 addr $rp2_mac +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +mac_profiles=$(devlink_resource_size_get rif_mac_profiles) +if [[ $mac_profiles -ne 1 ]]; then + tests_run +fi + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/rif_mac_profiles_occ.sh b/tools/testing/selftests/drivers/net/mlxsw/rif_mac_profiles_occ.sh new file mode 100755 index 000000000..026a126f5 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/rif_mac_profiles_occ.sh @@ -0,0 +1,147 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + rif_mac_profile_edit_test +" +NUM_NETIFS=2 +source $lib_dir/lib.sh +source $lib_dir/devlink_lib.sh + +setup_prepare() +{ + h1=${NETIFS[p1]} + h2=${NETIFS[p2]} + + # Disable IPv6 on the two interfaces to avoid IPv6 link-local addresses + # being generated and RIFs being created + sysctl_set net.ipv6.conf.$h1.disable_ipv6 1 + sysctl_set net.ipv6.conf.$h2.disable_ipv6 1 + + ip link set $h1 up + ip link set $h2 up +} + +cleanup() +{ + pre_cleanup + + ip link set $h2 down + ip link set $h1 down + + sysctl_restore net.ipv6.conf.$h2.disable_ipv6 + sysctl_restore net.ipv6.conf.$h1.disable_ipv6 + + # Reload in order to clean all the RIFs and RIF MAC profiles created + devlink_reload +} + +create_max_rif_mac_profiles() +{ + local count=$1; shift + local batch_file="$(mktemp)" + + for ((i = 1; i <= count; i++)); do + vlan=$(( i*10 )) + m=$(( i*11 )) + + cat >> $batch_file <<-EOF + link add link $h1 name $h1.$vlan \ + address 00:$m:$m:$m:$m:$m type vlan id $vlan + address add 192.0.$m.1/24 dev $h1.$vlan + EOF + done + + ip -b $batch_file &> /dev/null + rm -f $batch_file +} + +rif_mac_profile_replacement_test() +{ + local h1_10_mac=$(mac_get $h1.10) + + RET=0 + + ip link set $h1.10 address 00:12:34:56:78:99 + check_err $? + + log_test "RIF MAC profile replacement" + + ip link set $h1.10 address $h1_10_mac +} + +rif_mac_profile_consolidation_test() +{ + local count=$1; shift + local h1_20_mac + + RET=0 + + if [[ $count -eq 1 ]]; then + return + fi + + h1_20_mac=$(mac_get $h1.20) + + # Set the MAC of $h1.20 to that of $h1.10 and confirm that they are + # using the same MAC profile. + ip link set $h1.20 address 00:11:11:11:11:11 + check_err $? + + occ=$(devlink -j resource show $DEVLINK_DEV \ + | jq '.[][][] | select(.name=="rif_mac_profiles") |.["occ"]') + + [[ $occ -eq $((count - 1)) ]] + check_err $? "MAC profile occupancy did not decrease" + + log_test "RIF MAC profile consolidation" + + ip link set $h1.20 address $h1_20_mac +} + +rif_mac_profile_shared_replacement_test() +{ + local count=$1; shift + local i=$((count + 1)) + local vlan=$(( i*10 )) + local m=11 + + RET=0 + + # Create a VLAN netdevice that has the same MAC as the first one. + ip link add link $h1 name $h1.$vlan address 00:$m:$m:$m:$m:$m \ + type vlan id $vlan + ip address add 192.0.$m.1/24 dev $h1.$vlan + + # MAC replacement should fail because all the MAC profiles are in use + # and the profile is shared between multiple RIFs + m=$(( i*11 )) + ip link set $h1.$vlan address 00:$m:$m:$m:$m:$m &> /dev/null + check_fail $? + + log_test "RIF MAC profile shared replacement" + + ip link del dev $h1.$vlan +} + +rif_mac_profile_edit_test() +{ + local count=$(devlink_resource_size_get rif_mac_profiles) + + create_max_rif_mac_profiles $count + + rif_mac_profile_replacement_test + rif_mac_profile_consolidation_test $count + rif_mac_profile_shared_replacement_test $count +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/router_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/router_scale.sh new file mode 100644 index 000000000..683759d29 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/router_scale.sh @@ -0,0 +1,142 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +ROUTER_NUM_NETIFS=4 +: ${TIMEOUT:=20000} # ms + +router_h1_create() +{ + simple_if_init $h1 192.0.1.1/24 +} + +router_h1_destroy() +{ + simple_if_fini $h1 192.0.1.1/24 +} + +router_h2_create() +{ + simple_if_init $h2 192.0.2.1/24 + tc qdisc add dev $h2 handle ffff: ingress +} + +router_h2_destroy() +{ + tc qdisc del dev $h2 handle ffff: ingress + simple_if_fini $h2 192.0.2.1/24 +} + +router_create() +{ + ip link set dev $rp1 up + ip link set dev $rp2 up + + ip address add 192.0.1.2/24 dev $rp1 + ip address add 192.0.2.2/24 dev $rp2 +} + +router_destroy() +{ + ip address del 192.0.2.2/24 dev $rp2 + ip address del 192.0.1.2/24 dev $rp1 + + ip link set dev $rp2 down + ip link set dev $rp1 down +} + +router_setup_prepare() +{ + h1=${NETIFS[p1]} + rp1=${NETIFS[p2]} + + rp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + h1mac=$(mac_get $h1) + rp1mac=$(mac_get $rp1) + + vrf_prepare + + router_h1_create + router_h2_create + + router_create +} + +wait_for_routes() +{ + local t0=$1; shift + local route_count=$1; shift + + local t1=$(ip route | grep 'offload' | grep -v 'offload_failed' | wc -l) + local delta=$((t1 - t0)) + echo $delta + [[ $delta -ge $route_count ]] +} + +router_routes_create() +{ + local route_count=$1 + local count=0 + + ROUTE_FILE="$(mktemp)" + + for i in {0..255} + do + for j in {0..255} + do + for k in {0..255} + do + if [[ $count -eq $route_count ]]; then + break 3 + fi + + echo route add 193.${i}.${j}.${k}/32 dev $rp2 \ + >> $ROUTE_FILE + ((count++)) + done + done + done + + ip -b $ROUTE_FILE &> /dev/null +} + +router_routes_destroy() +{ + if [[ -v ROUTE_FILE ]]; then + rm -f $ROUTE_FILE + fi +} + +router_test() +{ + local route_count=$1 + local should_fail=$2 + local delta + + RET=0 + + local t0=$(ip route | grep -o 'offload' | wc -l) + router_routes_create $route_count + delta=$(busywait "$TIMEOUT" wait_for_routes $t0 $route_count) + + check_err_fail $should_fail $? "Offload routes: Expected $route_count, got $delta." + if [[ $RET -ne 0 ]] || [[ $should_fail -eq 1 ]]; then + return + fi + + router_routes_destroy +} + +router_cleanup() +{ + pre_cleanup + + router_routes_destroy + router_destroy + + router_h2_destroy + router_h1_destroy + + vrf_cleanup +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh b/tools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh new file mode 100755 index 000000000..04f03ae9d --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh @@ -0,0 +1,941 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test various interface configuration scenarios. Observe that configurations +# deemed valid by mlxsw succeed, invalid configurations fail and that no traces +# are produced. To prevent the test from passing in case traces are produced, +# the user can set the 'kernel.panic_on_warn' and 'kernel.panic_on_oops' +# sysctls in its environment. + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + rif_vrf_set_addr_test + rif_non_inherit_bridge_addr_test + vlan_interface_deletion_test + bridge_deletion_test + bridge_vlan_flags_test + vlan_1_test + lag_bridge_upper_test + duplicate_vlans_test + vlan_rif_refcount_test + subport_rif_refcount_test + subport_rif_lag_join_test + vlan_dev_deletion_test + lag_unlink_slaves_test + lag_dev_deletion_test + vlan_interface_uppers_test + bridge_extern_learn_test + neigh_offload_test + nexthop_offload_test + nexthop_obj_invalid_test + nexthop_obj_offload_test + nexthop_obj_group_offload_test + nexthop_obj_bucket_offload_test + nexthop_obj_blackhole_offload_test + nexthop_obj_route_offload_test + devlink_reload_test +" +NUM_NETIFS=2 +: ${TIMEOUT:=20000} # ms +source $lib_dir/lib.sh +source $lib_dir/devlink_lib.sh + +setup_prepare() +{ + swp1=${NETIFS[p1]} + swp2=${NETIFS[p2]} + + ip link set dev $swp1 up + ip link set dev $swp2 up +} + +cleanup() +{ + pre_cleanup + + ip link set dev $swp2 down + ip link set dev $swp1 down +} + +rif_vrf_set_addr_test() +{ + # Test that it is possible to set an IP address on a VRF upper despite + # its random MAC address. + RET=0 + + ip link add name vrf-test type vrf table 10 + ip link set dev $swp1 master vrf-test + + ip -4 address add 192.0.2.1/24 dev vrf-test + check_err $? "failed to set IPv4 address on VRF" + ip -6 address add 2001:db8:1::1/64 dev vrf-test + check_err $? "failed to set IPv6 address on VRF" + + log_test "RIF - setting IP address on VRF" + + ip link del dev vrf-test +} + +rif_non_inherit_bridge_addr_test() +{ + local swp2_mac=$(mac_get $swp2) + + RET=0 + + # Create first RIF + ip addr add dev $swp1 192.0.2.1/28 + check_err $? + + # Create a FID RIF + ip link add name br1 up type bridge vlan_filtering 0 + ip link set dev br1 addr $swp2_mac + ip link set dev $swp2 master br1 + ip addr add dev br1 192.0.2.17/28 + check_err $? + + # Prepare a device with a low MAC address + ip link add name d up type dummy + ip link set dev d addr 00:11:22:33:44:55 + + # Attach the device to br1. Since the bridge address was set, it should + # work. + ip link set dev d master br1 &>/dev/null + check_err $? "Could not attach a device with low MAC to a bridge with RIF" + + # Port MAC address change should be allowed for a bridge with set MAC. + ip link set dev $swp2 addr 00:11:22:33:44:55 + check_err $? "Changing swp2's MAC address not permitted" + + log_test "RIF - attach port with bad MAC to bridge with set MAC" + + ip link set dev $swp2 addr $swp2_mac + ip link del dev d + ip link del dev br1 + ip addr del dev $swp1 192.0.2.1/28 +} + +vlan_interface_deletion_test() +{ + # Test that when a VLAN interface is deleted, its associated router + # interface (RIF) is correctly deleted and not leaked. See commit + # c360867ec46a ("mlxsw: spectrum: Delete RIF when VLAN device is + # removed") for more details + RET=0 + + ip link add name br0 type bridge vlan_filtering 1 + ip link set dev $swp1 master br0 + + ip link add link br0 name br0.10 type vlan id 10 + ip -6 address add 2001:db8:1::1/64 dev br0.10 + ip link del dev br0.10 + + # If we leaked the previous RIF, then this should produce a trace + ip link add link br0 name br0.20 type vlan id 20 + ip -6 address add 2001:db8:1::1/64 dev br0.20 + ip link del dev br0.20 + + log_test "vlan interface deletion" + + ip link del dev br0 +} + +bridge_deletion_test() +{ + # Test that when a bridge with VLAN interfaces is deleted, we correctly + # delete the associated RIFs. See commit 602b74eda813 ("mlxsw: + # spectrum_switchdev: Do not leak RIFs when removing bridge") for more + # details + RET=0 + + ip link add name br0 type bridge vlan_filtering 1 + ip link set dev $swp1 master br0 + ip -6 address add 2001:db8::1/64 dev br0 + + ip link add link br0 name br0.10 type vlan id 10 + ip -6 address add 2001:db8:1::1/64 dev br0.10 + + ip link add link br0 name br0.20 type vlan id 20 + ip -6 address add 2001:db8:2::1/64 dev br0.20 + + ip link del dev br0 + + # If we leaked previous RIFs, then this should produce a trace + ip -6 address add 2001:db8:1::1/64 dev $swp1 + ip -6 address del 2001:db8:1::1/64 dev $swp1 + + log_test "bridge deletion" +} + +bridge_vlan_flags_test() +{ + # Test that when bridge VLAN flags are toggled, we do not take + # unnecessary references on related structs. See commit 9e25826ffc94 + # ("mlxsw: spectrum_switchdev: Fix port_vlan refcounting") for more + # details + RET=0 + + ip link add name br0 type bridge vlan_filtering 1 + ip link set dev $swp1 master br0 + + bridge vlan add vid 10 dev $swp1 pvid untagged + bridge vlan add vid 10 dev $swp1 untagged + bridge vlan add vid 10 dev $swp1 pvid + bridge vlan add vid 10 dev $swp1 + ip link del dev br0 + + # If we did not handle references correctly, then this should produce a + # trace + devlink dev reload "$DEVLINK_DEV" + + # Allow netdevices to be re-created following the reload + sleep 20 + + log_test "bridge vlan flags" +} + +vlan_1_test() +{ + # Test that VLAN 1 can be configured over mlxsw ports. In the past it + # was used internally for untagged traffic. See commit 47bf9df2e820 + # ("mlxsw: spectrum: Forbid creation of VLAN 1 over port/LAG") for more + # details + RET=0 + + ip link add link $swp1 name $swp1.1 type vlan id 1 + check_err $? "did not manage to create vlan 1 when should" + + log_test "vlan 1" + + ip link del dev $swp1.1 +} + +lag_bridge_upper_test() +{ + # Test that ports cannot be enslaved to LAG devices that have uppers + # and that failure is handled gracefully. See commit b3529af6bb0d + # ("spectrum: Reference count VLAN entries") for more details + RET=0 + + ip link add name bond1 type bond mode 802.3ad + + ip link add name br0 type bridge vlan_filtering 1 + ip link set dev bond1 master br0 + + ip link set dev $swp1 down + ip link set dev $swp1 master bond1 &> /dev/null + check_fail $? "managed to enslave port to lag when should not" + + # This might generate a trace, if we did not handle the failure + # correctly + ip -6 address add 2001:db8:1::1/64 dev $swp1 + ip -6 address del 2001:db8:1::1/64 dev $swp1 + + log_test "lag with bridge upper" + + ip link del dev br0 + ip link del dev bond1 +} + +duplicate_vlans_test() +{ + # Test that on a given port a VLAN is only used once. Either as VLAN + # in a VLAN-aware bridge or as a VLAN device + RET=0 + + ip link add name br0 type bridge vlan_filtering 1 + ip link set dev $swp1 master br0 + bridge vlan add vid 10 dev $swp1 + + ip link add link $swp1 name $swp1.10 type vlan id 10 &> /dev/null + check_fail $? "managed to create vlan device when should not" + + bridge vlan del vid 10 dev $swp1 + ip link add link $swp1 name $swp1.10 type vlan id 10 + check_err $? "did not manage to create vlan device when should" + bridge vlan add vid 10 dev $swp1 &> /dev/null + check_fail $? "managed to add bridge vlan when should not" + + log_test "duplicate vlans" + + ip link del dev $swp1.10 + ip link del dev br0 +} + +vlan_rif_refcount_test() +{ + # Test that RIFs representing VLAN interfaces are not affected from + # ports member in the VLAN. We use the offload indication on routes + # configured on the RIF to understand if it was created / destroyed + RET=0 + + ip link add name br0 type bridge vlan_filtering 1 + ip link set dev $swp1 master br0 + + ip link set dev $swp1 up + ip link set dev br0 up + + ip link add link br0 name br0.10 up type vlan id 10 + ip -6 address add 2001:db8:1::1/64 dev br0.10 + + busywait "$TIMEOUT" wait_for_offload \ + ip -6 route get fibmatch 2001:db8:1::2 dev br0.10 + check_err $? "vlan rif was not created before adding port to vlan" + + bridge vlan add vid 10 dev $swp1 + busywait "$TIMEOUT" wait_for_offload \ + ip -6 route get fibmatch 2001:db8:1::2 dev br0.10 + check_err $? "vlan rif was destroyed after adding port to vlan" + + bridge vlan del vid 10 dev $swp1 + busywait "$TIMEOUT" wait_for_offload \ + ip -6 route get fibmatch 2001:db8:1::2 dev br0.10 + check_err $? "vlan rif was destroyed after removing port from vlan" + + ip link set dev $swp1 nomaster + busywait "$TIMEOUT" not wait_for_offload \ + ip -6 route get fibmatch 2001:db8:1::2 dev br0.10 + check_err $? "vlan rif was not destroyed after unlinking port from bridge" + + log_test "vlan rif refcount" + + ip link del dev br0.10 + ip link set dev $swp1 down + ip link del dev br0 +} + +subport_rif_refcount_test() +{ + # Test that RIFs representing upper devices of physical ports are + # reference counted correctly and destroyed when should. We use the + # offload indication on routes configured on the RIF to understand if + # it was created / destroyed + RET=0 + + ip link add name bond1 type bond mode 802.3ad + ip link set dev $swp1 down + ip link set dev $swp2 down + ip link set dev $swp1 master bond1 + ip link set dev $swp2 master bond1 + + ip link set dev bond1 up + ip link add link bond1 name bond1.10 up type vlan id 10 + ip -6 address add 2001:db8:1::1/64 dev bond1 + ip -6 address add 2001:db8:2::1/64 dev bond1.10 + + busywait "$TIMEOUT" wait_for_offload \ + ip -6 route get fibmatch 2001:db8:1::2 dev bond1 + check_err $? "subport rif was not created on lag device" + busywait "$TIMEOUT" wait_for_offload \ + ip -6 route get fibmatch 2001:db8:2::2 dev bond1.10 + check_err $? "subport rif was not created on vlan device" + + ip link set dev $swp1 nomaster + busywait "$TIMEOUT" wait_for_offload \ + ip -6 route get fibmatch 2001:db8:1::2 dev bond1 + check_err $? "subport rif of lag device was destroyed when should not" + busywait "$TIMEOUT" wait_for_offload \ + ip -6 route get fibmatch 2001:db8:2::2 dev bond1.10 + check_err $? "subport rif of vlan device was destroyed when should not" + + ip link set dev $swp2 nomaster + busywait "$TIMEOUT" not wait_for_offload \ + ip -6 route get fibmatch 2001:db8:1::2 dev bond1 + check_err $? "subport rif of lag device was not destroyed when should" + busywait "$TIMEOUT" not wait_for_offload \ + ip -6 route get fibmatch 2001:db8:2::2 dev bond1.10 + check_err $? "subport rif of vlan device was not destroyed when should" + + log_test "subport rif refcount" + + ip link del dev bond1.10 + ip link del dev bond1 +} + +subport_rif_lag_join_test() +{ + # Test that the reference count of a RIF configured for a LAG is + # incremented / decremented when ports join / leave the LAG. We use the + # offload indication on routes configured on the RIF to understand if + # it was created / destroyed + RET=0 + + ip link add name bond1 type bond mode 802.3ad + ip link set dev $swp1 down + ip link set dev $swp2 down + ip link set dev $swp1 master bond1 + ip link set dev $swp2 master bond1 + + ip link set dev bond1 up + ip -6 address add 2001:db8:1::1/64 dev bond1 + + busywait "$TIMEOUT" wait_for_offload \ + ip -6 route get fibmatch 2001:db8:1::2 dev bond1 + check_err $? "subport rif was not created on lag device" + + ip link set dev $swp1 nomaster + busywait "$TIMEOUT" wait_for_offload \ + ip -6 route get fibmatch 2001:db8:1::2 dev bond1 + check_err $? "subport rif of lag device was destroyed after removing one port" + + ip link set dev $swp1 master bond1 + ip link set dev $swp2 nomaster + busywait "$TIMEOUT" wait_for_offload \ + ip -6 route get fibmatch 2001:db8:1::2 dev bond1 + check_err $? "subport rif of lag device was destroyed after re-adding a port and removing another" + + ip link set dev $swp1 nomaster + busywait "$TIMEOUT" not wait_for_offload \ + ip -6 route get fibmatch 2001:db8:1::2 dev bond1 + check_err $? "subport rif of lag device was not destroyed when should" + + log_test "subport rif lag join" + + ip link del dev bond1 +} + +vlan_dev_deletion_test() +{ + # Test that VLAN devices are correctly deleted / unlinked when enslaved + # to bridge + RET=0 + + ip link add name br10 type bridge + ip link add name br20 type bridge + ip link add name br30 type bridge + ip link add link $swp1 name $swp1.10 type vlan id 10 + ip link add link $swp1 name $swp1.20 type vlan id 20 + ip link add link $swp1 name $swp1.30 type vlan id 30 + ip link set dev $swp1.10 master br10 + ip link set dev $swp1.20 master br20 + ip link set dev $swp1.30 master br30 + + # If we did not handle the situation correctly, then these operations + # might produce a trace + ip link set dev $swp1.30 nomaster + ip link del dev $swp1.20 + # Deletion via ioctl uses different code paths from netlink + vconfig rem $swp1.10 &> /dev/null + + log_test "vlan device deletion" + + ip link del dev $swp1.30 + ip link del dev br30 + ip link del dev br20 + ip link del dev br10 +} + +lag_create() +{ + ip link add name bond1 type bond mode 802.3ad + ip link set dev $swp1 down + ip link set dev $swp2 down + ip link set dev $swp1 master bond1 + ip link set dev $swp2 master bond1 + + ip link add link bond1 name bond1.10 type vlan id 10 + ip link add link bond1 name bond1.20 type vlan id 20 + + ip link add name br0 type bridge vlan_filtering 1 + ip link set dev bond1 master br0 + + ip link add name br10 type bridge + ip link set dev bond1.10 master br10 + + ip link add name br20 type bridge + ip link set dev bond1.20 master br20 +} + +lag_unlink_slaves_test() +{ + # Test that ports are correctly unlinked from their LAG master, when + # the LAG and its VLAN uppers are enslaved to bridges + RET=0 + + lag_create + + ip link set dev $swp1 nomaster + check_err $? "lag slave $swp1 was not unlinked from master" + ip link set dev $swp2 nomaster + check_err $? "lag slave $swp2 was not unlinked from master" + + # Try to configure corresponding VLANs as router interfaces + ip -6 address add 2001:db8:1::1/64 dev $swp1 + check_err $? "failed to configure ip address on $swp1" + + ip link add link $swp1 name $swp1.10 type vlan id 10 + ip -6 address add 2001:db8:10::1/64 dev $swp1.10 + check_err $? "failed to configure ip address on $swp1.10" + + ip link add link $swp1 name $swp1.20 type vlan id 20 + ip -6 address add 2001:db8:20::1/64 dev $swp1.20 + check_err $? "failed to configure ip address on $swp1.20" + + log_test "lag slaves unlinking" + + ip link del dev $swp1.20 + ip link del dev $swp1.10 + ip address flush dev $swp1 + + ip link del dev br20 + ip link del dev br10 + ip link del dev br0 + ip link del dev bond1 +} + +lag_dev_deletion_test() +{ + # Test that LAG device is correctly deleted, when the LAG and its VLAN + # uppers are enslaved to bridges + RET=0 + + lag_create + + ip link del dev bond1 + + log_test "lag device deletion" + + ip link del dev br20 + ip link del dev br10 + ip link del dev br0 +} + +vlan_interface_uppers_test() +{ + # Test that uppers of a VLAN interface are correctly sanitized + RET=0 + + ip link add name br0 type bridge vlan_filtering 1 + ip link set dev $swp1 master br0 + + ip link add link br0 name br0.10 type vlan id 10 + ip link add link br0.10 name macvlan0 \ + type macvlan mode private &> /dev/null + check_fail $? "managed to create a macvlan when should not" + + ip -6 address add 2001:db8:1::1/64 dev br0.10 + ip link add link br0.10 name macvlan0 type macvlan mode private + check_err $? "did not manage to create a macvlan when should" + + ip link del dev macvlan0 + + ip link add name vrf-test type vrf table 10 + ip link set dev br0.10 master vrf-test + check_err $? "did not manage to enslave vlan interface to vrf" + ip link del dev vrf-test + + ip link add name br-test type bridge + ip link set dev br0.10 master br-test &> /dev/null + check_fail $? "managed to enslave vlan interface to bridge when should not" + ip link del dev br-test + + log_test "vlan interface uppers" + + ip link del dev br0 +} + +bridge_extern_learn_test() +{ + # Test that externally learned entries added from user space are + # marked as offloaded + RET=0 + + ip link add name br0 type bridge + ip link set dev $swp1 master br0 + + bridge fdb add de:ad:be:ef:13:37 dev $swp1 master extern_learn + + busywait "$TIMEOUT" wait_for_offload \ + bridge fdb show brport $swp1 de:ad:be:ef:13:37 + check_err $? "fdb entry not marked as offloaded when should" + + log_test "externally learned fdb entry" + + ip link del dev br0 +} + +neigh_offload_test() +{ + # Test that IPv4 and IPv6 neighbour entries are marked as offloaded + RET=0 + + ip -4 address add 192.0.2.1/24 dev $swp1 + ip -6 address add 2001:db8:1::1/64 dev $swp1 + + ip -4 neigh add 192.0.2.2 lladdr de:ad:be:ef:13:37 nud perm dev $swp1 + ip -6 neigh add 2001:db8:1::2 lladdr de:ad:be:ef:13:37 nud perm \ + dev $swp1 + + busywait "$TIMEOUT" wait_for_offload \ + ip -4 neigh show dev $swp1 192.0.2.2 + check_err $? "ipv4 neigh entry not marked as offloaded when should" + busywait "$TIMEOUT" wait_for_offload \ + ip -6 neigh show dev $swp1 2001:db8:1::2 + check_err $? "ipv6 neigh entry not marked as offloaded when should" + + log_test "neighbour offload indication" + + ip -6 neigh del 2001:db8:1::2 dev $swp1 + ip -4 neigh del 192.0.2.2 dev $swp1 + ip -6 address del 2001:db8:1::1/64 dev $swp1 + ip -4 address del 192.0.2.1/24 dev $swp1 +} + +nexthop_offload_test() +{ + # Test that IPv4 and IPv6 nexthops are marked as offloaded + RET=0 + + sysctl_set net.ipv6.conf.$swp2.keep_addr_on_down 1 + simple_if_init $swp1 192.0.2.1/24 2001:db8:1::1/64 + simple_if_init $swp2 192.0.2.2/24 2001:db8:1::2/64 + setup_wait + + ip -4 route add 198.51.100.0/24 vrf v$swp1 \ + nexthop via 192.0.2.2 dev $swp1 + ip -6 route add 2001:db8:2::/64 vrf v$swp1 \ + nexthop via 2001:db8:1::2 dev $swp1 + + busywait "$TIMEOUT" wait_for_offload \ + ip -4 route show 198.51.100.0/24 vrf v$swp1 + check_err $? "ipv4 nexthop not marked as offloaded when should" + busywait "$TIMEOUT" wait_for_offload \ + ip -6 route show 2001:db8:2::/64 vrf v$swp1 + check_err $? "ipv6 nexthop not marked as offloaded when should" + + ip link set dev $swp2 down + sleep 1 + + busywait "$TIMEOUT" not wait_for_offload \ + ip -4 route show 198.51.100.0/24 vrf v$swp1 + check_err $? "ipv4 nexthop marked as offloaded when should not" + busywait "$TIMEOUT" not wait_for_offload \ + ip -6 route show 2001:db8:2::/64 vrf v$swp1 + check_err $? "ipv6 nexthop marked as offloaded when should not" + + ip link set dev $swp2 up + setup_wait + + busywait "$TIMEOUT" wait_for_offload \ + ip -4 route show 198.51.100.0/24 vrf v$swp1 + check_err $? "ipv4 nexthop not marked as offloaded after neigh add" + busywait "$TIMEOUT" wait_for_offload \ + ip -6 route show 2001:db8:2::/64 vrf v$swp1 + check_err $? "ipv6 nexthop not marked as offloaded after neigh add" + + log_test "nexthop offload indication" + + ip -6 route del 2001:db8:2::/64 vrf v$swp1 + ip -4 route del 198.51.100.0/24 vrf v$swp1 + + simple_if_fini $swp2 192.0.2.2/24 2001:db8:1::2/64 + simple_if_fini $swp1 192.0.2.1/24 2001:db8:1::1/64 + sysctl_restore net.ipv6.conf.$swp2.keep_addr_on_down +} + +nexthop_obj_invalid_test() +{ + # Test that invalid nexthop object configurations are rejected + RET=0 + + simple_if_init $swp1 192.0.2.1/24 2001:db8:1::1/64 + simple_if_init $swp2 192.0.2.2/24 2001:db8:1::2/64 + setup_wait + + ip nexthop add id 1 via 192.0.2.3 fdb + check_fail $? "managed to configure an FDB nexthop when should not" + + ip nexthop add id 1 encap mpls 200/300 via 192.0.2.3 dev $swp1 + check_fail $? "managed to configure a nexthop with MPLS encap when should not" + + ip nexthop add id 1 dev $swp1 + ip nexthop add id 2 dev $swp1 + ip nexthop add id 3 via 192.0.2.3 dev $swp1 + ip nexthop add id 10 group 1/2 + check_fail $? "managed to configure a nexthop group with device-only nexthops when should not" + + ip nexthop add id 10 group 3 type resilient buckets 7 + check_fail $? "managed to configure a too small resilient nexthop group when should not" + + ip nexthop add id 10 group 3 type resilient buckets 129 + check_fail $? "managed to configure a resilient nexthop group with invalid number of buckets when should not" + + ip nexthop add id 10 group 1/2 type resilient buckets 32 + check_fail $? "managed to configure a resilient nexthop group with device-only nexthops when should not" + + ip nexthop add id 10 group 3 type resilient buckets 32 + check_err $? "failed to configure a valid resilient nexthop group" + ip nexthop replace id 3 dev $swp1 + check_fail $? "managed to populate a nexthop bucket with a device-only nexthop when should not" + + log_test "nexthop objects - invalid configurations" + + ip nexthop del id 10 + ip nexthop del id 3 + ip nexthop del id 2 + ip nexthop del id 1 + + simple_if_fini $swp2 192.0.2.2/24 2001:db8:1::2/64 + simple_if_fini $swp1 192.0.2.1/24 2001:db8:1::1/64 +} + +nexthop_obj_offload_test() +{ + # Test offload indication of nexthop objects + RET=0 + + simple_if_init $swp1 192.0.2.1/24 2001:db8:1::1/64 + simple_if_init $swp2 + setup_wait + + ip nexthop add id 1 via 192.0.2.2 dev $swp1 + ip neigh replace 192.0.2.2 lladdr 00:11:22:33:44:55 nud perm \ + dev $swp1 + + busywait "$TIMEOUT" wait_for_offload \ + ip nexthop show id 1 + check_err $? "nexthop not marked as offloaded when should" + + ip neigh replace 192.0.2.2 nud failed dev $swp1 + busywait "$TIMEOUT" not wait_for_offload \ + ip nexthop show id 1 + check_err $? "nexthop marked as offloaded after setting neigh to failed state" + + ip neigh replace 192.0.2.2 lladdr 00:11:22:33:44:55 nud perm \ + dev $swp1 + busywait "$TIMEOUT" wait_for_offload \ + ip nexthop show id 1 + check_err $? "nexthop not marked as offloaded after neigh replace" + + ip nexthop replace id 1 via 192.0.2.3 dev $swp1 + busywait "$TIMEOUT" not wait_for_offload \ + ip nexthop show id 1 + check_err $? "nexthop marked as offloaded after replacing to use an invalid address" + + ip nexthop replace id 1 via 192.0.2.2 dev $swp1 + busywait "$TIMEOUT" wait_for_offload \ + ip nexthop show id 1 + check_err $? "nexthop not marked as offloaded after replacing to use a valid address" + + log_test "nexthop objects offload indication" + + ip neigh del 192.0.2.2 dev $swp1 + ip nexthop del id 1 + + simple_if_fini $swp2 + simple_if_fini $swp1 192.0.2.1/24 2001:db8:1::1/64 +} + +nexthop_obj_group_offload_test() +{ + # Test offload indication of nexthop group objects + RET=0 + + simple_if_init $swp1 192.0.2.1/24 2001:db8:1::1/64 + simple_if_init $swp2 + setup_wait + + ip nexthop add id 1 via 192.0.2.2 dev $swp1 + ip nexthop add id 2 via 2001:db8:1::2 dev $swp1 + ip nexthop add id 10 group 1/2 + ip neigh replace 192.0.2.2 lladdr 00:11:22:33:44:55 nud perm \ + dev $swp1 + ip neigh replace 192.0.2.3 lladdr 00:11:22:33:44:55 nud perm \ + dev $swp1 + ip neigh replace 2001:db8:1::2 lladdr 00:11:22:33:44:55 nud perm \ + dev $swp1 + + busywait "$TIMEOUT" wait_for_offload \ + ip nexthop show id 1 + check_err $? "IPv4 nexthop not marked as offloaded when should" + busywait "$TIMEOUT" wait_for_offload \ + ip nexthop show id 2 + check_err $? "IPv6 nexthop not marked as offloaded when should" + busywait "$TIMEOUT" wait_for_offload \ + ip nexthop show id 10 + check_err $? "nexthop group not marked as offloaded when should" + + # Invalidate nexthop id 1 + ip neigh replace 192.0.2.2 nud failed dev $swp1 + busywait "$TIMEOUT" not wait_for_offload \ + ip nexthop show id 10 + check_fail $? "nexthop group not marked as offloaded with one valid nexthop" + + # Invalidate nexthop id 2 + ip neigh replace 2001:db8:1::2 nud failed dev $swp1 + busywait "$TIMEOUT" not wait_for_offload \ + ip nexthop show id 10 + check_err $? "nexthop group marked as offloaded when should not" + + # Revalidate nexthop id 1 + ip nexthop replace id 1 via 192.0.2.3 dev $swp1 + busywait "$TIMEOUT" wait_for_offload \ + ip nexthop show id 10 + check_err $? "nexthop group not marked as offloaded after revalidating nexthop" + + log_test "nexthop group objects offload indication" + + ip neigh del 2001:db8:1::2 dev $swp1 + ip neigh del 192.0.2.3 dev $swp1 + ip neigh del 192.0.2.2 dev $swp1 + ip nexthop del id 10 + ip nexthop del id 2 + ip nexthop del id 1 + + simple_if_fini $swp2 + simple_if_fini $swp1 192.0.2.1/24 2001:db8:1::1/64 +} + +nexthop_obj_bucket_offload_test() +{ + # Test offload indication of nexthop buckets + RET=0 + + simple_if_init $swp1 192.0.2.1/24 2001:db8:1::1/64 + simple_if_init $swp2 + setup_wait + + ip nexthop add id 1 via 192.0.2.2 dev $swp1 + ip nexthop add id 2 via 2001:db8:1::2 dev $swp1 + ip nexthop add id 10 group 1/2 type resilient buckets 32 idle_timer 0 + ip neigh replace 192.0.2.2 lladdr 00:11:22:33:44:55 nud perm \ + dev $swp1 + ip neigh replace 192.0.2.3 lladdr 00:11:22:33:44:55 nud perm \ + dev $swp1 + ip neigh replace 2001:db8:1::2 lladdr 00:11:22:33:44:55 nud perm \ + dev $swp1 + + busywait "$TIMEOUT" wait_for_offload \ + ip nexthop bucket show nhid 1 + check_err $? "IPv4 nexthop buckets not marked as offloaded when should" + busywait "$TIMEOUT" wait_for_offload \ + ip nexthop bucket show nhid 2 + check_err $? "IPv6 nexthop buckets not marked as offloaded when should" + + # Invalidate nexthop id 1 + ip neigh replace 192.0.2.2 nud failed dev $swp1 + busywait "$TIMEOUT" wait_for_trap \ + ip nexthop bucket show nhid 1 + check_err $? "IPv4 nexthop buckets not marked with trap when should" + + # Invalidate nexthop id 2 + ip neigh replace 2001:db8:1::2 nud failed dev $swp1 + busywait "$TIMEOUT" wait_for_trap \ + ip nexthop bucket show nhid 2 + check_err $? "IPv6 nexthop buckets not marked with trap when should" + + # Revalidate nexthop id 1 by changing its configuration + ip nexthop replace id 1 via 192.0.2.3 dev $swp1 + busywait "$TIMEOUT" wait_for_offload \ + ip nexthop bucket show nhid 1 + check_err $? "nexthop bucket not marked as offloaded after revalidating nexthop" + + # Revalidate nexthop id 2 by changing its neighbour + ip neigh replace 2001:db8:1::2 lladdr 00:11:22:33:44:55 nud perm \ + dev $swp1 + busywait "$TIMEOUT" wait_for_offload \ + ip nexthop bucket show nhid 2 + check_err $? "nexthop bucket not marked as offloaded after revalidating neighbour" + + log_test "nexthop bucket offload indication" + + ip neigh del 2001:db8:1::2 dev $swp1 + ip neigh del 192.0.2.3 dev $swp1 + ip neigh del 192.0.2.2 dev $swp1 + ip nexthop del id 10 + ip nexthop del id 2 + ip nexthop del id 1 + + simple_if_fini $swp2 + simple_if_fini $swp1 192.0.2.1/24 2001:db8:1::1/64 +} + +nexthop_obj_blackhole_offload_test() +{ + # Test offload indication of blackhole nexthop objects + RET=0 + + ip nexthop add id 1 blackhole + busywait "$TIMEOUT" wait_for_offload \ + ip nexthop show id 1 + check_err $? "Blackhole nexthop not marked as offloaded when should" + + ip nexthop add id 10 group 1 + busywait "$TIMEOUT" wait_for_offload \ + ip nexthop show id 10 + check_err $? "Nexthop group not marked as offloaded when should" + + log_test "blackhole nexthop objects offload indication" + + ip nexthop del id 10 + ip nexthop del id 1 +} + +nexthop_obj_route_offload_test() +{ + # Test offload indication of routes using nexthop objects + RET=0 + + simple_if_init $swp1 192.0.2.1/24 2001:db8:1::1/64 + simple_if_init $swp2 + setup_wait + + ip nexthop add id 1 via 192.0.2.2 dev $swp1 + ip neigh replace 192.0.2.2 lladdr 00:11:22:33:44:55 nud perm \ + dev $swp1 + ip neigh replace 192.0.2.3 lladdr 00:11:22:33:44:55 nud perm \ + dev $swp1 + + ip route replace 198.51.100.0/24 nhid 1 + busywait "$TIMEOUT" wait_for_offload \ + ip route show 198.51.100.0/24 + check_err $? "route not marked as offloaded when using valid nexthop" + + ip nexthop replace id 1 via 192.0.2.3 dev $swp1 + busywait "$TIMEOUT" wait_for_offload \ + ip route show 198.51.100.0/24 + check_err $? "route not marked as offloaded after replacing valid nexthop with a valid one" + + ip nexthop replace id 1 via 192.0.2.4 dev $swp1 + busywait "$TIMEOUT" not wait_for_offload \ + ip route show 198.51.100.0/24 + check_err $? "route marked as offloaded after replacing valid nexthop with an invalid one" + + ip nexthop replace id 1 via 192.0.2.2 dev $swp1 + busywait "$TIMEOUT" wait_for_offload \ + ip route show 198.51.100.0/24 + check_err $? "route not marked as offloaded after replacing invalid nexthop with a valid one" + + log_test "routes using nexthop objects offload indication" + + ip route del 198.51.100.0/24 + ip neigh del 192.0.2.3 dev $swp1 + ip neigh del 192.0.2.2 dev $swp1 + ip nexthop del id 1 + + simple_if_fini $swp2 + simple_if_fini $swp1 192.0.2.1/24 2001:db8:1::1/64 +} + +devlink_reload_test() +{ + # Test that after executing all the above configuration tests, a + # devlink reload can be performed without errors + RET=0 + + devlink dev reload "$DEVLINK_DEV" + check_err $? "devlink reload failed" + + log_test "devlink reload - last test" + + sleep 20 +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/sch_ets.sh b/tools/testing/selftests/drivers/net/mlxsw/sch_ets.sh new file mode 100755 index 000000000..ceaa76b17 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/sch_ets.sh @@ -0,0 +1,82 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# A driver for the ETS selftest that implements testing in offloaded datapath. +lib_dir=$(dirname $0)/../../../net/forwarding +source $lib_dir/sch_ets_core.sh +source $lib_dir/devlink_lib.sh +source qos_lib.sh + +ALL_TESTS=" + ping_ipv4 + priomap_mode + ets_test_strict + ets_test_mixed + ets_test_dwrr +" + +PARENT="parent 3:3" + +switch_create() +{ + # Create a bottleneck so that the DWRR process can kick in. + tc qdisc replace dev $swp2 root handle 3: tbf rate 1gbit \ + burst 128K limit 1G + + ets_switch_create + + # Set the ingress quota high and use the three egress TCs to limit the + # amount of traffic that is admitted to the shared buffers. This makes + # sure that there is always enough traffic of all types to select from + # for the DWRR process. + devlink_port_pool_th_save $swp1 0 + devlink_port_pool_th_set $swp1 0 12 + devlink_tc_bind_pool_th_save $swp1 0 ingress + devlink_tc_bind_pool_th_set $swp1 0 ingress 0 12 + devlink_port_pool_th_save $swp2 4 + devlink_port_pool_th_set $swp2 4 12 + devlink_tc_bind_pool_th_save $swp2 7 egress + devlink_tc_bind_pool_th_set $swp2 7 egress 4 5 + devlink_tc_bind_pool_th_save $swp2 6 egress + devlink_tc_bind_pool_th_set $swp2 6 egress 4 5 + devlink_tc_bind_pool_th_save $swp2 5 egress + devlink_tc_bind_pool_th_set $swp2 5 egress 4 5 + + # Note: sch_ets_core.sh uses VLAN ingress-qos-map to assign packet + # priorities at $swp1 based on their 802.1p headers. ingress-qos-map is + # not offloaded by mlxsw as of this writing, but the mapping used is + # 1:1, which is the mapping currently hard-coded by the driver. +} + +switch_destroy() +{ + devlink_tc_bind_pool_th_restore $swp2 5 egress + devlink_tc_bind_pool_th_restore $swp2 6 egress + devlink_tc_bind_pool_th_restore $swp2 7 egress + devlink_port_pool_th_restore $swp2 4 + devlink_tc_bind_pool_th_restore $swp1 0 ingress + devlink_port_pool_th_restore $swp1 0 + + ets_switch_destroy + + tc qdisc del dev $swp2 root handle 3: +} + +# Callback from sch_ets_tests.sh +collect_stats() +{ + local -a streams=("$@") + local stream + + # Wait for qdisc counter update so that we don't get it mid-way through. + busywait_for_counter 1000 +1 \ + qdisc_parent_stats_get $swp2 10:$((${streams[0]} + 1)) .bytes \ + > /dev/null + + for stream in ${streams[@]}; do + qdisc_parent_stats_get $swp2 10:$((stream + 1)) .bytes + done +} + +bail_on_lldpad +ets_run diff --git a/tools/testing/selftests/drivers/net/mlxsw/sch_offload.sh b/tools/testing/selftests/drivers/net/mlxsw/sch_offload.sh new file mode 100755 index 000000000..071a33d10 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/sch_offload.sh @@ -0,0 +1,290 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test qdisc offload indication + + +ALL_TESTS=" + test_root + test_port_tbf + test_etsprio + test_etsprio_port_tbf +" +NUM_NETIFS=1 +lib_dir=$(dirname $0)/../../../net/forwarding +source $lib_dir/lib.sh + +check_not_offloaded() +{ + local handle=$1; shift + local h + local offloaded + + h=$(qdisc_stats_get $h1 "$handle" .handle) + [[ $h == '"'$handle'"' ]] + check_err $? "Qdisc with handle $handle does not exist" + + offloaded=$(qdisc_stats_get $h1 "$handle" .offloaded) + [[ $offloaded == true ]] + check_fail $? "Qdisc with handle $handle offloaded, but should not be" +} + +check_all_offloaded() +{ + local handle=$1; shift + + if [[ ! -z $handle ]]; then + local offloaded=$(qdisc_stats_get $h1 "$handle" .offloaded) + [[ $offloaded == true ]] + check_err $? "Qdisc with handle $handle not offloaded" + fi + + local unoffloaded=$(tc q sh dev $h1 invisible | + grep -v offloaded | + sed s/root/parent\ root/ | + cut -d' ' -f 5) + [[ -z $unoffloaded ]] + check_err $? "Qdiscs with following parents not offloaded: $unoffloaded" + + pre_cleanup +} + +with_ets() +{ + local handle=$1; shift + local locus=$1; shift + + tc qdisc add dev $h1 $locus handle $handle \ + ets bands 8 priomap 7 6 5 4 3 2 1 0 + "$@" + tc qdisc del dev $h1 $locus +} + +with_prio() +{ + local handle=$1; shift + local locus=$1; shift + + tc qdisc add dev $h1 $locus handle $handle \ + prio bands 8 priomap 7 6 5 4 3 2 1 0 + "$@" + tc qdisc del dev $h1 $locus +} + +with_red() +{ + local handle=$1; shift + local locus=$1; shift + + tc qdisc add dev $h1 $locus handle $handle \ + red limit 1000000 min 200000 max 300000 probability 0.5 avpkt 1500 + "$@" + tc qdisc del dev $h1 $locus +} + +with_tbf() +{ + local handle=$1; shift + local locus=$1; shift + + tc qdisc add dev $h1 $locus handle $handle \ + tbf rate 400Mbit burst 128K limit 1M + "$@" + tc qdisc del dev $h1 $locus +} + +with_pfifo() +{ + local handle=$1; shift + local locus=$1; shift + + tc qdisc add dev $h1 $locus handle $handle pfifo limit 100K + "$@" + tc qdisc del dev $h1 $locus +} + +with_bfifo() +{ + local handle=$1; shift + local locus=$1; shift + + tc qdisc add dev $h1 $locus handle $handle bfifo limit 100K + "$@" + tc qdisc del dev $h1 $locus +} + +with_drr() +{ + local handle=$1; shift + local locus=$1; shift + + tc qdisc add dev $h1 $locus handle $handle drr + "$@" + tc qdisc del dev $h1 $locus +} + +with_qdiscs() +{ + local handle=$1; shift + local parent=$1; shift + local kind=$1; shift + local next_handle=$((handle * 2)) + local locus; + + if [[ $kind == "--" ]]; then + local cmd=$1; shift + $cmd $(printf %x: $parent) "$@" + else + if ((parent == 0)); then + locus=root + else + locus=$(printf "parent %x:1" $parent) + fi + + with_$kind $(printf %x: $handle) "$locus" \ + with_qdiscs $next_handle $handle "$@" + fi +} + +get_name() +{ + local parent=$1; shift + local name=$(echo "" "${@^^}" | tr ' ' -) + + if ((parent != 0)); then + kind=$(qdisc_stats_get $h1 $parent: .kind) + kind=${kind%\"} + kind=${kind#\"} + name="-${kind^^}$name" + fi + + echo root$name +} + +do_test_offloaded() +{ + local handle=$1; shift + local parent=$1; shift + + RET=0 + with_qdiscs $handle $parent "$@" -- check_all_offloaded + log_test $(get_name $parent "$@")" offloaded" +} + +do_test_nooffload() +{ + local handle=$1; shift + local parent=$1; shift + + local name=$(echo "${@^^}" | tr ' ' -) + local kind + + RET=0 + with_qdiscs $handle $parent "$@" -- check_not_offloaded + log_test $(get_name $parent "$@")" not offloaded" +} + +do_test_combinations() +{ + local handle=$1; shift + local parent=$1; shift + + local cont + local leaf + local fifo + + for cont in "" ets prio; do + for leaf in "" red tbf "red tbf" "tbf red"; do + for fifo in "" pfifo bfifo; do + if [[ -z "$cont$leaf$fifo" ]]; then + continue + fi + do_test_offloaded $handle $parent \ + $cont $leaf $fifo + done + done + done + + for cont in ets prio; do + for leaf in red tbf; do + do_test_nooffload $handle $parent $cont red tbf $leaf + do_test_nooffload $handle $parent $cont tbf red $leaf + done + for leaf in "red red" "tbf tbf"; do + do_test_nooffload $handle $parent $cont $leaf + done + done + + do_test_nooffload $handle $parent drr +} + +test_root() +{ + do_test_combinations 1 0 +} + +test_port_tbf() +{ + with_tbf 1: root \ + do_test_combinations 8 1 +} + +do_test_etsprio() +{ + local parent=$1; shift + local tbfpfx=$1; shift + local cont + + for cont in ets prio; do + RET=0 + with_$cont 8: "$parent" \ + with_red 11: "parent 8:1" \ + with_red 12: "parent 8:2" \ + with_tbf 13: "parent 8:3" \ + with_tbf 14: "parent 8:4" \ + check_all_offloaded + log_test "root$tbfpfx-ETS-{RED,TBF} offloaded" + + RET=0 + with_$cont 8: "$parent" \ + with_red 81: "parent 8:1" \ + with_tbf 811: "parent 81:1" \ + with_tbf 84: "parent 8:4" \ + with_red 841: "parent 84:1" \ + check_all_offloaded + log_test "root$tbfpfx-ETS-{RED-TBF,TBF-RED} offloaded" + + RET=0 + with_$cont 8: "$parent" \ + with_red 81: "parent 8:1" \ + with_tbf 811: "parent 81:1" \ + with_bfifo 8111: "parent 811:1" \ + with_tbf 82: "parent 8:2" \ + with_red 821: "parent 82:1" \ + with_bfifo 8211: "parent 821:1" \ + check_all_offloaded + log_test "root$tbfpfx-ETS-{RED-TBF-bFIFO,TBF-RED-bFIFO} offloaded" + done +} + +test_etsprio() +{ + do_test_etsprio root "" +} + +test_etsprio_port_tbf() +{ + with_tbf 1: root \ + do_test_etsprio "parent 1:1" "-TBF" +} + +cleanup() +{ + tc qdisc del dev $h1 root &>/dev/null +} + +trap cleanup EXIT +h1=${NETIFS[p1]} +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/sch_red_core.sh b/tools/testing/selftests/drivers/net/mlxsw/sch_red_core.sh new file mode 100644 index 000000000..45b41b8f3 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/sch_red_core.sh @@ -0,0 +1,761 @@ +# SPDX-License-Identifier: GPL-2.0 + +# This test sends a >1Gbps stream of traffic from H1, to the switch, which +# forwards it to a 1Gbps port. This 1Gbps stream is then looped back to the +# switch and forwarded to the port under test $swp3, which is also 1Gbps. +# +# This way, $swp3 should be 100% filled with traffic without any of it spilling +# to the backlog. Any extra packets sent should almost 1:1 go to backlog. That +# is what H2 is used for--it sends the extra traffic to create backlog. +# +# A RED Qdisc is installed on $swp3. The configuration is such that the minimum +# and maximum size are 1 byte apart, so there is a very clear border under which +# no marking or dropping takes place, and above which everything is marked or +# dropped. +# +# The test uses the buffer build-up behavior to test the installed RED. +# +# In order to test WRED, $swp3 actually contains RED under PRIO, with two +# different configurations. Traffic is prioritized using 802.1p and relies on +# the implicit mlxsw configuration, where packet priority is taken 1:1 from the +# 802.1p marking. +# +# +--------------------------+ +--------------------------+ +# | H1 | | H2 | +# | + $h1.10 | | + $h2.10 | +# | | 192.0.2.1/28 | | | 192.0.2.2/28 | +# | | | | | | +# | | $h1.11 + | | | $h2.11 + | +# | | 192.0.2.17/28 | | | | 192.0.2.18/28 | | +# | | | | | | | | +# | \______ ______/ | | \______ ______/ | +# | \ / | | \ / | +# | + $h1 | | + $h2 | +# +-------------|------------+ +-------------|------------+ +# | >1Gbps | +# +-------------|------------------------------------------------|------------+ +# | SW + $swp1 + $swp2 | +# | _______/ \___________ ___________/ \_______ | +# | / \ / \ | +# | +-|-----------------+ | +-|-----------------+ | | +# | | + $swp1.10 | | | + $swp2.10 | | | +# | | | | .-------------+ $swp5.10 | | | +# | | BR1_10 | | | | | | | +# | | | | | | BR2_10 | | | +# | | + $swp2.10 | | | | | | | +# | +-|-----------------+ | | | + $swp3.10 | | | +# | | | | +-|-----------------+ | | +# | | +-----------------|-+ | | +-----------------|-+ | +# | | | $swp1.11 + | | | | $swp2.11 + | | +# | | | | | .-----------------+ $swp5.11 | | +# | | | BR1_11 | | | | | | | +# | | | | | | | | BR2_11 | | +# | | | $swp2.11 + | | | | | | | +# | | +-----------------|-+ | | | | $swp3.11 + | | +# | | | | | | +-----------------|-+ | +# | \_______ ___________/ | | \___________ _______/ | +# | \ / \ / \ / | +# | + $swp4 + $swp5 + $swp3 | +# +-------------|----------------------|-------------------------|------------+ +# | | | 1Gbps +# \________1Gbps_________/ | +# +----------------------------|------------+ +# | H3 + $h3 | +# | _____________________/ \_______ | +# | / \ | +# | | | | +# | + $h3.10 $h3.11 + | +# | 192.0.2.3/28 192.0.2.19/28 | +# +-----------------------------------------+ + +NUM_NETIFS=8 +CHECK_TC="yes" +lib_dir=$(dirname $0)/../../../net/forwarding +source $lib_dir/lib.sh +source $lib_dir/devlink_lib.sh +source mlxsw_lib.sh +source qos_lib.sh + +ipaddr() +{ + local host=$1; shift + local vlan=$1; shift + + echo 192.0.2.$((16 * (vlan - 10) + host)) +} + +host_create() +{ + local dev=$1; shift + local host=$1; shift + + simple_if_init $dev + mtu_set $dev 10000 + + vlan_create $dev 10 v$dev $(ipaddr $host 10)/28 + ip link set dev $dev.10 type vlan egress 0:0 + + vlan_create $dev 11 v$dev $(ipaddr $host 11)/28 + ip link set dev $dev.11 type vlan egress 0:1 +} + +host_destroy() +{ + local dev=$1; shift + + vlan_destroy $dev 11 + vlan_destroy $dev 10 + mtu_restore $dev + simple_if_fini $dev +} + +h1_create() +{ + host_create $h1 1 +} + +h1_destroy() +{ + host_destroy $h1 +} + +h2_create() +{ + host_create $h2 2 + tc qdisc add dev $h2 clsact + + # Some of the tests in this suite use multicast traffic. As this traffic + # enters BR2_10 resp. BR2_11, it is flooded to all other ports. Thus + # e.g. traffic ingressing through $swp2 is flooded to $swp3 (the + # intended destination) and $swp5 (which is intended as ingress for + # another stream of traffic). + # + # This is generally not a problem, but if the $swp5 throughput is lower + # than $swp2 throughput, there will be a build-up at $swp5. That may + # cause packets to fail to queue up at $swp3 due to shared buffer + # quotas, and the test to spuriously fail. + # + # Prevent this by adding a shaper which limits the traffic in $h2 to + # 1Gbps. + + tc qdisc replace dev $h2 root handle 10: tbf rate 1gbit \ + burst 128K limit 1G +} + +h2_destroy() +{ + tc qdisc del dev $h2 root handle 10: + tc qdisc del dev $h2 clsact + host_destroy $h2 +} + +h3_create() +{ + host_create $h3 3 +} + +h3_destroy() +{ + host_destroy $h3 +} + +switch_create() +{ + local intf + local vlan + + ip link add dev br1_10 type bridge + ip link add dev br1_11 type bridge + + ip link add dev br2_10 type bridge + ip link add dev br2_11 type bridge + + for intf in $swp1 $swp2 $swp3 $swp4 $swp5; do + ip link set dev $intf up + mtu_set $intf 10000 + done + + for intf in $swp1 $swp4; do + for vlan in 10 11; do + vlan_create $intf $vlan + ip link set dev $intf.$vlan master br1_$vlan + ip link set dev $intf.$vlan up + done + done + + for intf in $swp2 $swp3 $swp5; do + for vlan in 10 11; do + vlan_create $intf $vlan + ip link set dev $intf.$vlan master br2_$vlan + ip link set dev $intf.$vlan up + done + done + + ip link set dev $swp4.10 type vlan egress 0:0 + ip link set dev $swp4.11 type vlan egress 0:1 + for intf in $swp1 $swp2 $swp5; do + for vlan in 10 11; do + ip link set dev $intf.$vlan type vlan ingress 0:0 1:1 + done + done + + for intf in $swp3 $swp4; do + tc qdisc replace dev $intf root handle 1: tbf rate 1gbit \ + burst 128K limit 1G + done + + ip link set dev br1_10 up + ip link set dev br1_11 up + ip link set dev br2_10 up + ip link set dev br2_11 up + + local size=$(devlink_pool_size_thtype 0 | cut -d' ' -f 1) + devlink_port_pool_th_save $swp3 8 + devlink_port_pool_th_set $swp3 8 $size +} + +switch_destroy() +{ + local intf + local vlan + + devlink_port_pool_th_restore $swp3 8 + + ip link set dev br2_11 down + ip link set dev br2_10 down + ip link set dev br1_11 down + ip link set dev br1_10 down + + for intf in $swp4 $swp3; do + tc qdisc del dev $intf root handle 1: + done + + for intf in $swp5 $swp3 $swp2 $swp4 $swp1; do + for vlan in 11 10; do + ip link set dev $intf.$vlan down + ip link set dev $intf.$vlan nomaster + vlan_destroy $intf $vlan + done + + mtu_restore $intf + ip link set dev $intf down + done + + ip link del dev br2_11 + ip link del dev br2_10 + ip link del dev br1_11 + ip link del dev br1_10 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + swp3=${NETIFS[p5]} + h3=${NETIFS[p6]} + + swp4=${NETIFS[p7]} + swp5=${NETIFS[p8]} + + h3_mac=$(mac_get $h3) + + vrf_prepare + + h1_create + h2_create + h3_create + switch_create +} + +cleanup() +{ + pre_cleanup + + switch_destroy + h3_destroy + h2_destroy + h1_destroy + + vrf_cleanup +} + +ping_ipv4() +{ + ping_test $h1.10 $(ipaddr 3 10) " from host 1, vlan 10" + ping_test $h1.11 $(ipaddr 3 11) " from host 1, vlan 11" + ping_test $h2.10 $(ipaddr 3 10) " from host 2, vlan 10" + ping_test $h2.11 $(ipaddr 3 11) " from host 2, vlan 11" +} + +get_tc() +{ + local vlan=$1; shift + + echo $((vlan - 10)) +} + +get_qdisc_handle() +{ + local vlan=$1; shift + + local tc=$(get_tc $vlan) + local band=$((8 - tc)) + + # Handle is 107: for TC1, 108: for TC0. + echo "10$band:" +} + +get_qdisc_backlog() +{ + local vlan=$1; shift + + qdisc_stats_get $swp3 $(get_qdisc_handle $vlan) .backlog +} + +get_mc_transmit_queue() +{ + local vlan=$1; shift + + local tc=$(($(get_tc $vlan) + 8)) + ethtool_stats_get $swp3 tc_transmit_queue_tc_$tc +} + +get_nmarked() +{ + local vlan=$1; shift + + ethtool_stats_get $swp3 ecn_marked +} + +get_qdisc_nmarked() +{ + local vlan=$1; shift + + busywait_for_counter 1100 +1 \ + qdisc_stats_get $swp3 $(get_qdisc_handle $vlan) .marked +} + +get_qdisc_npackets() +{ + local vlan=$1; shift + + busywait_for_counter 1100 +1 \ + qdisc_stats_get $swp3 $(get_qdisc_handle $vlan) .packets +} + +send_packets() +{ + local vlan=$1; shift + local proto=$1; shift + local pkts=$1; shift + + $MZ $h2.$vlan -p 8000 -a own -b $h3_mac \ + -A $(ipaddr 2 $vlan) -B $(ipaddr 3 $vlan) \ + -t $proto -q -c $pkts "$@" +} + +# This sends traffic in an attempt to build a backlog of $size. Returns 0 on +# success. After 10 failed attempts it bails out and returns 1. It dumps the +# backlog size to stdout. +build_backlog() +{ + local vlan=$1; shift + local size=$1; shift + local proto=$1; shift + + local tc=$((vlan - 10)) + local band=$((8 - tc)) + local cur=-1 + local i=0 + + while :; do + local cur=$(busywait 1100 until_counter_is "> $cur" \ + get_qdisc_backlog $vlan) + local diff=$((size - cur)) + local pkts=$(((diff + 7999) / 8000)) + + if ((cur >= size)); then + echo $cur + return 0 + elif ((i++ > 10)); then + echo $cur + return 1 + fi + + send_packets $vlan $proto $pkts "$@" + done +} + +check_marking() +{ + local get_nmarked=$1; shift + local vlan=$1; shift + local cond=$1; shift + + local npackets_0=$(get_qdisc_npackets $vlan) + local nmarked_0=$($get_nmarked $vlan) + sleep 5 + local npackets_1=$(get_qdisc_npackets $vlan) + local nmarked_1=$($get_nmarked $vlan) + + local nmarked_d=$((nmarked_1 - nmarked_0)) + local npackets_d=$((npackets_1 - npackets_0)) + local pct=$((100 * nmarked_d / npackets_d)) + + echo $pct + ((pct $cond)) +} + +ecn_test_common() +{ + local name=$1; shift + local get_nmarked=$1; shift + local vlan=$1; shift + local limit=$1; shift + local backlog + local pct + + # Build the below-the-limit backlog using UDP. We could use TCP just + # fine, but this way we get a proof that UDP is accepted when queue + # length is below the limit. The main stream is using TCP, and if the + # limit is misconfigured, we would see this traffic being ECN marked. + RET=0 + backlog=$(build_backlog $vlan $((2 * limit / 3)) udp) + check_err $? "Could not build the requested backlog" + pct=$(check_marking "$get_nmarked" $vlan "== 0") + check_err $? "backlog $backlog / $limit Got $pct% marked packets, expected == 0." + log_test "TC $((vlan - 10)): $name backlog < limit" + + # Now push TCP, because non-TCP traffic would be early-dropped after the + # backlog crosses the limit, and we want to make sure that the backlog + # is above the limit. + RET=0 + backlog=$(build_backlog $vlan $((3 * limit / 2)) tcp tos=0x01) + check_err $? "Could not build the requested backlog" + pct=$(check_marking "$get_nmarked" $vlan ">= 95") + check_err $? "backlog $backlog / $limit Got $pct% marked packets, expected >= 95." + log_test "TC $((vlan - 10)): $name backlog > limit" +} + +__do_ecn_test() +{ + local get_nmarked=$1; shift + local vlan=$1; shift + local limit=$1; shift + local name=${1-ECN}; shift + + start_tcp_traffic $h1.$vlan $(ipaddr 1 $vlan) $(ipaddr 3 $vlan) \ + $h3_mac tos=0x01 + sleep 1 + + ecn_test_common "$name" "$get_nmarked" $vlan $limit + + # Up there we saw that UDP gets accepted when backlog is below the + # limit. Now that it is above, it should all get dropped, and backlog + # building should fail. + RET=0 + build_backlog $vlan $((2 * limit)) udp >/dev/null + check_fail $? "UDP traffic went into backlog instead of being early-dropped" + log_test "TC $((vlan - 10)): $name backlog > limit: UDP early-dropped" + + stop_traffic + sleep 1 +} + +do_ecn_test() +{ + local vlan=$1; shift + local limit=$1; shift + + __do_ecn_test get_nmarked "$vlan" "$limit" +} + +do_ecn_test_perband() +{ + local vlan=$1; shift + local limit=$1; shift + + mlxsw_only_on_spectrum 3+ || return + __do_ecn_test get_qdisc_nmarked "$vlan" "$limit" "per-band ECN" +} + +do_ecn_nodrop_test() +{ + local vlan=$1; shift + local limit=$1; shift + local name="ECN nodrop" + + start_tcp_traffic $h1.$vlan $(ipaddr 1 $vlan) $(ipaddr 3 $vlan) \ + $h3_mac tos=0x01 + sleep 1 + + ecn_test_common "$name" get_nmarked $vlan $limit + + # Up there we saw that UDP gets accepted when backlog is below the + # limit. Now that it is above, in nodrop mode, make sure it goes to + # backlog as well. + RET=0 + build_backlog $vlan $((2 * limit)) udp >/dev/null + check_err $? "UDP traffic was early-dropped instead of getting into backlog" + log_test "TC $((vlan - 10)): $name backlog > limit: UDP not dropped" + + stop_traffic + sleep 1 +} + +do_red_test() +{ + local vlan=$1; shift + local limit=$1; shift + local backlog + local pct + + # Use ECN-capable TCP to verify there's no marking even though the queue + # is above limit. + start_tcp_traffic $h1.$vlan $(ipaddr 1 $vlan) $(ipaddr 3 $vlan) \ + $h3_mac tos=0x01 + + # Pushing below the queue limit should work. + RET=0 + backlog=$(build_backlog $vlan $((2 * limit / 3)) tcp tos=0x01) + check_err $? "Could not build the requested backlog" + pct=$(check_marking get_nmarked $vlan "== 0") + check_err $? "backlog $backlog / $limit Got $pct% marked packets, expected == 0." + log_test "TC $((vlan - 10)): RED backlog < limit" + + # Pushing above should not. + RET=0 + backlog=$(build_backlog $vlan $((3 * limit / 2)) tcp tos=0x01) + check_fail $? "Traffic went into backlog instead of being early-dropped" + pct=$(check_marking get_nmarked $vlan "== 0") + check_err $? "backlog $backlog / $limit Got $pct% marked packets, expected == 0." + local diff=$((limit - backlog)) + pct=$((100 * diff / limit)) + ((-10 <= pct && pct <= 10)) + check_err $? "backlog $backlog / $limit expected <= 10% distance" + log_test "TC $((vlan - 10)): RED backlog > limit" + + stop_traffic + sleep 1 +} + +do_mc_backlog_test() +{ + local vlan=$1; shift + local limit=$1; shift + local backlog + local pct + + RET=0 + + start_tcp_traffic $h1.$vlan $(ipaddr 1 $vlan) $(ipaddr 3 $vlan) bc + start_tcp_traffic $h2.$vlan $(ipaddr 2 $vlan) $(ipaddr 3 $vlan) bc + + qbl=$(busywait 5000 until_counter_is ">= 500000" \ + get_qdisc_backlog $vlan) + check_err $? "Could not build MC backlog" + + # Verify that we actually see the backlog on BUM TC. Do a busywait as + # well, performance blips might cause false fail. + local ebl + ebl=$(busywait 5000 until_counter_is ">= 500000" \ + get_mc_transmit_queue $vlan) + check_err $? "MC backlog reported by qdisc not visible in ethtool" + + stop_traffic + stop_traffic + + log_test "TC $((vlan - 10)): Qdisc reports MC backlog" +} + +do_mark_test() +{ + local vlan=$1; shift + local limit=$1; shift + local subtest=$1; shift + local fetch_counter=$1; shift + local should_fail=$1; shift + local base + + mlxsw_only_on_spectrum 2+ || return + + RET=0 + + start_tcp_traffic $h1.$vlan $(ipaddr 1 $vlan) $(ipaddr 3 $vlan) \ + $h3_mac tos=0x01 + + # Create a bit of a backlog and observe no mirroring due to marks. + qevent_rule_install_$subtest + + build_backlog $vlan $((2 * limit / 3)) tcp tos=0x01 >/dev/null + + base=$($fetch_counter) + count=$(busywait 1100 until_counter_is ">= $((base + 1))" \ + $fetch_counter) + check_fail $? "Spurious packets ($base -> $count) observed without buffer pressure" + + # Above limit, everything should be mirrored, we should see lots of + # packets. + build_backlog $vlan $((3 * limit / 2)) tcp tos=0x01 >/dev/null + busywait_for_counter 1100 +10000 \ + $fetch_counter > /dev/null + check_err_fail "$should_fail" $? "ECN-marked packets $subtest'd" + + # When the rule is uninstalled, there should be no mirroring. + qevent_rule_uninstall_$subtest + busywait_for_counter 1100 +10 \ + $fetch_counter > /dev/null + check_fail $? "Spurious packets observed after uninstall" + + if ((should_fail)); then + log_test "TC $((vlan - 10)): marked packets not $subtest'd" + else + log_test "TC $((vlan - 10)): marked packets $subtest'd" + fi + + stop_traffic + sleep 1 +} + +do_drop_test() +{ + local vlan=$1; shift + local limit=$1; shift + local trigger=$1; shift + local subtest=$1; shift + local fetch_counter=$1; shift + local base + local now + + mlxsw_only_on_spectrum 2+ || return + + RET=0 + + start_traffic $h1.$vlan $(ipaddr 1 $vlan) $(ipaddr 3 $vlan) $h3_mac + + # Create a bit of a backlog and observe no mirroring due to drops. + qevent_rule_install_$subtest + base=$($fetch_counter) + + build_backlog $vlan $((2 * limit / 3)) udp >/dev/null + + busywait 1100 until_counter_is ">= $((base + 1))" $fetch_counter >/dev/null + check_fail $? "Spurious packets observed without buffer pressure" + + # Push to the queue until it's at the limit. The configured limit is + # rounded by the qdisc and then by the driver, so this is the best we + # can do to get to the real limit of the system. + build_backlog $vlan $((3 * limit / 2)) udp >/dev/null + + base=$($fetch_counter) + send_packets $vlan udp 11 + + now=$(busywait 1100 until_counter_is ">= $((base + 10))" $fetch_counter) + check_err $? "Dropped packets not observed: 11 expected, $((now - base)) seen" + + # When no extra traffic is injected, there should be no mirroring. + busywait 1100 until_counter_is ">= $((base + 20))" $fetch_counter >/dev/null + check_fail $? "Spurious packets observed" + + # When the rule is uninstalled, there should be no mirroring. + qevent_rule_uninstall_$subtest + send_packets $vlan udp 11 + busywait 1100 until_counter_is ">= $((base + 20))" $fetch_counter >/dev/null + check_fail $? "Spurious packets observed after uninstall" + + log_test "TC $((vlan - 10)): ${trigger}ped packets $subtest'd" + + stop_traffic + sleep 1 +} + +qevent_rule_install_mirror() +{ + tc filter add block 10 pref 1234 handle 102 matchall skip_sw \ + action mirred egress mirror dev $swp2 hw_stats disabled +} + +qevent_rule_uninstall_mirror() +{ + tc filter del block 10 pref 1234 handle 102 matchall +} + +qevent_counter_fetch_mirror() +{ + tc_rule_handle_stats_get "dev $h2 ingress" 101 +} + +do_drop_mirror_test() +{ + local vlan=$1; shift + local limit=$1; shift + local qevent_name=$1; shift + + tc filter add dev $h2 ingress pref 1 handle 101 prot ip \ + flower skip_sw ip_proto udp \ + action drop + + do_drop_test "$vlan" "$limit" "$qevent_name" mirror \ + qevent_counter_fetch_mirror + + tc filter del dev $h2 ingress pref 1 handle 101 flower +} + +do_mark_mirror_test() +{ + local vlan=$1; shift + local limit=$1; shift + + tc filter add dev $h2 ingress pref 1 handle 101 prot ip \ + flower skip_sw ip_proto tcp \ + action drop + + do_mark_test "$vlan" "$limit" mirror \ + qevent_counter_fetch_mirror \ + $(: should_fail=)0 + + tc filter del dev $h2 ingress pref 1 handle 101 flower +} + +qevent_rule_install_trap() +{ + tc filter add block 10 pref 1234 handle 102 matchall skip_sw \ + action trap hw_stats disabled +} + +qevent_rule_uninstall_trap() +{ + tc filter del block 10 pref 1234 handle 102 matchall +} + +qevent_counter_fetch_trap() +{ + local trap_name=$1; shift + + devlink_trap_rx_packets_get "$trap_name" +} + +do_drop_trap_test() +{ + local vlan=$1; shift + local limit=$1; shift + local trap_name=$1; shift + + do_drop_test "$vlan" "$limit" "$trap_name" trap \ + "qevent_counter_fetch_trap $trap_name" +} + +qevent_rule_install_trap_fwd() +{ + tc filter add block 10 pref 1234 handle 102 matchall skip_sw \ + action trap_fwd hw_stats disabled +} + +qevent_rule_uninstall_trap_fwd() +{ + tc filter del block 10 pref 1234 handle 102 matchall +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/sch_red_ets.sh b/tools/testing/selftests/drivers/net/mlxsw/sch_red_ets.sh new file mode 100755 index 000000000..0d01c7cd8 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/sch_red_ets.sh @@ -0,0 +1,176 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +ALL_TESTS=" + ping_ipv4 + ecn_test + ecn_test_perband + ecn_nodrop_test + red_test + mc_backlog_test + red_mirror_test + red_trap_test + ecn_mirror_test +" +: ${QDISC:=ets} +source sch_red_core.sh + +# do_ecn_test first build 2/3 of the requested backlog and expects no marking, +# and then builds 3/2 of it and does expect marking. The values of $BACKLOG1 and +# $BACKLOG2 are far enough not to overlap, so that we can assume that if we do +# see (do not see) marking, it is actually due to the configuration of that one +# TC, and not due to configuration of the other TC leaking over. +BACKLOG1=200000 +BACKLOG2=500000 + +install_root_qdisc() +{ + tc qdisc add dev $swp3 parent 1: handle 10: $QDISC \ + bands 8 priomap 7 6 5 4 3 2 1 0 +} + +install_qdisc_tc0() +{ + local -a args=("$@") + + tc qdisc add dev $swp3 parent 10:8 handle 108: red \ + limit 1000000 min $BACKLOG1 max $((BACKLOG1 + 1)) \ + probability 1.0 avpkt 8000 burst 38 "${args[@]}" +} + +install_qdisc_tc1() +{ + local -a args=("$@") + + tc qdisc add dev $swp3 parent 10:7 handle 107: red \ + limit 1000000 min $BACKLOG2 max $((BACKLOG2 + 1)) \ + probability 1.0 avpkt 8000 burst 63 "${args[@]}" +} + +install_qdisc() +{ + install_root_qdisc + install_qdisc_tc0 "$@" + install_qdisc_tc1 "$@" + sleep 1 +} + +uninstall_qdisc_tc0() +{ + tc qdisc del dev $swp3 parent 10:8 +} + +uninstall_qdisc_tc1() +{ + tc qdisc del dev $swp3 parent 10:7 +} + +uninstall_root_qdisc() +{ + tc qdisc del dev $swp3 parent 1: +} + +uninstall_qdisc() +{ + uninstall_qdisc_tc0 + uninstall_qdisc_tc1 + uninstall_root_qdisc +} + +ecn_test() +{ + install_qdisc ecn + + do_ecn_test 10 $BACKLOG1 + do_ecn_test 11 $BACKLOG2 + + uninstall_qdisc +} + +ecn_test_perband() +{ + install_qdisc ecn + + do_ecn_test_perband 10 $BACKLOG1 + do_ecn_test_perband 11 $BACKLOG2 + + uninstall_qdisc +} + +ecn_nodrop_test() +{ + install_qdisc ecn nodrop + + do_ecn_nodrop_test 10 $BACKLOG1 + do_ecn_nodrop_test 11 $BACKLOG2 + + uninstall_qdisc +} + +red_test() +{ + install_qdisc + + # Make sure that we get the non-zero value if there is any. + local cur=$(busywait 1100 until_counter_is "> 0" \ + qdisc_stats_get $swp3 10: .backlog) + (( cur == 0 )) + check_err $? "backlog of $cur observed on non-busy qdisc" + log_test "$QDISC backlog properly cleaned" + + do_red_test 10 $BACKLOG1 + do_red_test 11 $BACKLOG2 + + uninstall_qdisc +} + +mc_backlog_test() +{ + install_qdisc + + # Note that the backlog numbers here do not correspond to RED + # configuration, but are arbitrary. + do_mc_backlog_test 10 $BACKLOG1 + do_mc_backlog_test 11 $BACKLOG2 + + uninstall_qdisc +} + +red_mirror_test() +{ + install_qdisc qevent early_drop block 10 + + do_drop_mirror_test 10 $BACKLOG1 early_drop + do_drop_mirror_test 11 $BACKLOG2 early_drop + + uninstall_qdisc +} + +red_trap_test() +{ + install_qdisc qevent early_drop block 10 + + do_drop_trap_test 10 $BACKLOG1 early_drop + do_drop_trap_test 11 $BACKLOG2 early_drop + + uninstall_qdisc +} + +ecn_mirror_test() +{ + install_qdisc ecn qevent mark block 10 + + do_mark_mirror_test 10 $BACKLOG1 + do_mark_mirror_test 11 $BACKLOG2 + + uninstall_qdisc +} + +bail_on_lldpad + +trap cleanup EXIT +setup_prepare +setup_wait +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/sch_red_prio.sh b/tools/testing/selftests/drivers/net/mlxsw/sch_red_prio.sh new file mode 100755 index 000000000..76820a0e9 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/sch_red_prio.sh @@ -0,0 +1,5 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +QDISC=prio +source sch_red_ets.sh diff --git a/tools/testing/selftests/drivers/net/mlxsw/sch_red_root.sh b/tools/testing/selftests/drivers/net/mlxsw/sch_red_root.sh new file mode 100755 index 000000000..860205338 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/sch_red_root.sh @@ -0,0 +1,83 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +ALL_TESTS=" + ping_ipv4 + ecn_test + ecn_test_perband + ecn_nodrop_test + red_test + mc_backlog_test + red_mirror_test +" +source sch_red_core.sh + +BACKLOG=300000 + +install_qdisc() +{ + local -a args=("$@") + + tc qdisc add dev $swp3 parent 1: handle 108: red \ + limit 1000000 min $BACKLOG max $((BACKLOG + 1)) \ + probability 1.0 avpkt 8000 burst 38 "${args[@]}" + sleep 1 +} + +uninstall_qdisc() +{ + tc qdisc del dev $swp3 parent 1: +} + +ecn_test() +{ + install_qdisc ecn + do_ecn_test 10 $BACKLOG + uninstall_qdisc +} + +ecn_test_perband() +{ + install_qdisc ecn + do_ecn_test_perband 10 $BACKLOG + uninstall_qdisc +} + +ecn_nodrop_test() +{ + install_qdisc ecn nodrop + do_ecn_nodrop_test 10 $BACKLOG + uninstall_qdisc +} + +red_test() +{ + install_qdisc + do_red_test 10 $BACKLOG + uninstall_qdisc +} + +mc_backlog_test() +{ + install_qdisc + # Note that the backlog value here does not correspond to RED + # configuration, but is arbitrary. + do_mc_backlog_test 10 $BACKLOG + uninstall_qdisc +} + +red_mirror_test() +{ + install_qdisc qevent early_drop block 10 + do_drop_mirror_test 10 $BACKLOG + uninstall_qdisc +} + +bail_on_lldpad + +trap cleanup EXIT +setup_prepare +setup_wait +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/sch_tbf_ets.sh b/tools/testing/selftests/drivers/net/mlxsw/sch_tbf_ets.sh new file mode 100755 index 000000000..c6ce0b448 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/sch_tbf_ets.sh @@ -0,0 +1,9 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +source qos_lib.sh +bail_on_lldpad + +lib_dir=$(dirname $0)/../../../net/forwarding +TCFLAGS=skip_sw +source $lib_dir/sch_tbf_ets.sh diff --git a/tools/testing/selftests/drivers/net/mlxsw/sch_tbf_prio.sh b/tools/testing/selftests/drivers/net/mlxsw/sch_tbf_prio.sh new file mode 100755 index 000000000..8d245f331 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/sch_tbf_prio.sh @@ -0,0 +1,9 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +source qos_lib.sh +bail_on_lldpad + +lib_dir=$(dirname $0)/../../../net/forwarding +TCFLAGS=skip_sw +source $lib_dir/sch_tbf_prio.sh diff --git a/tools/testing/selftests/drivers/net/mlxsw/sch_tbf_root.sh b/tools/testing/selftests/drivers/net/mlxsw/sch_tbf_root.sh new file mode 100755 index 000000000..013886061 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/sch_tbf_root.sh @@ -0,0 +1,9 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +source qos_lib.sh +bail_on_lldpad + +lib_dir=$(dirname $0)/../../../net/forwarding +TCFLAGS=skip_sw +source $lib_dir/sch_tbf_root.sh diff --git a/tools/testing/selftests/drivers/net/mlxsw/sharedbuffer.sh b/tools/testing/selftests/drivers/net/mlxsw/sharedbuffer.sh new file mode 100755 index 000000000..0c47faff9 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/sharedbuffer.sh @@ -0,0 +1,218 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +ALL_TESTS=" + port_pool_test + port_tc_ip_test + port_tc_arp_test +" + +NUM_NETIFS=2 +source ../../../net/forwarding/lib.sh +source ../../../net/forwarding/devlink_lib.sh +source mlxsw_lib.sh + +SB_POOL_ING=0 +SB_POOL_EGR_CPU=10 + +SB_ITC_CPU_IP=2 +SB_ITC_CPU_ARP=2 +SB_ITC=0 + +h1_create() +{ + simple_if_init $h1 192.0.1.1/24 +} + +h1_destroy() +{ + simple_if_fini $h1 192.0.1.1/24 +} + +h2_create() +{ + simple_if_init $h2 192.0.1.2/24 +} + +h2_destroy() +{ + simple_if_fini $h2 192.0.1.2/24 +} + +sb_occ_pool_check() +{ + local dl_port=$1; shift + local pool=$1; shift + local exp_max_occ=$1 + local max_occ + local err=0 + + max_occ=$(devlink sb -j occupancy show $dl_port \ + | jq -e ".[][][\"pool\"][\"$pool\"][\"max\"]") + + if [[ "$max_occ" -ne "$exp_max_occ" ]]; then + err=1 + fi + + echo $max_occ + return $err +} + +sb_occ_itc_check() +{ + local dl_port=$1; shift + local itc=$1; shift + local exp_max_occ=$1 + local max_occ + local err=0 + + max_occ=$(devlink sb -j occupancy show $dl_port \ + | jq -e ".[][][\"itc\"][\"$itc\"][\"max\"]") + + if [[ "$max_occ" -ne "$exp_max_occ" ]]; then + err=1 + fi + + echo $max_occ + return $err +} + +sb_occ_etc_check() +{ + local dl_port=$1; shift + local etc=$1; shift + local exp_max_occ=$1; shift + local max_occ + local err=0 + + max_occ=$(devlink sb -j occupancy show $dl_port \ + | jq -e ".[][][\"etc\"][\"$etc\"][\"max\"]") + + if [[ "$max_occ" -ne "$exp_max_occ" ]]; then + err=1 + fi + + echo $max_occ + return $err +} + +port_pool_test() +{ + local exp_max_occ=$(devlink_cell_size_get) + local max_occ + + devlink sb occupancy clearmax $DEVLINK_DEV + + $MZ $h1 -c 1 -p 10 -a $h1mac -b $h2mac -A 192.0.1.1 -B 192.0.1.2 \ + -t ip -q + + devlink sb occupancy snapshot $DEVLINK_DEV + + RET=0 + max_occ=$(sb_occ_pool_check $dl_port1 $SB_POOL_ING $exp_max_occ) + check_err $? "Expected iPool($SB_POOL_ING) max occupancy to be $exp_max_occ, but got $max_occ" + log_test "physical port's($h1) ingress pool" + + RET=0 + max_occ=$(sb_occ_pool_check $dl_port2 $SB_POOL_ING $exp_max_occ) + check_err $? "Expected iPool($SB_POOL_ING) max occupancy to be $exp_max_occ, but got $max_occ" + log_test "physical port's($h2) ingress pool" + + RET=0 + max_occ=$(sb_occ_pool_check $cpu_dl_port $SB_POOL_EGR_CPU $exp_max_occ) + check_err $? "Expected ePool($SB_POOL_EGR_CPU) max occupancy to be $exp_max_occ, but got $max_occ" + log_test "CPU port's egress pool" +} + +port_tc_ip_test() +{ + local exp_max_occ=$(devlink_cell_size_get) + local max_occ + + devlink sb occupancy clearmax $DEVLINK_DEV + + $MZ $h1 -c 1 -p 10 -a $h1mac -b $h2mac -A 192.0.1.1 -B 192.0.1.2 \ + -t ip -q + + devlink sb occupancy snapshot $DEVLINK_DEV + + RET=0 + max_occ=$(sb_occ_itc_check $dl_port2 $SB_ITC $exp_max_occ) + check_err $? "Expected ingress TC($SB_ITC) max occupancy to be $exp_max_occ, but got $max_occ" + log_test "physical port's($h1) ingress TC - IP packet" + + RET=0 + max_occ=$(sb_occ_itc_check $dl_port2 $SB_ITC $exp_max_occ) + check_err $? "Expected ingress TC($SB_ITC) max occupancy to be $exp_max_occ, but got $max_occ" + log_test "physical port's($h2) ingress TC - IP packet" + + RET=0 + max_occ=$(sb_occ_etc_check $cpu_dl_port $SB_ITC_CPU_IP $exp_max_occ) + check_err $? "Expected egress TC($SB_ITC_CPU_IP) max occupancy to be $exp_max_occ, but got $max_occ" + log_test "CPU port's egress TC - IP packet" +} + +port_tc_arp_test() +{ + local exp_max_occ=$(devlink_cell_size_get) + local max_occ + + devlink sb occupancy clearmax $DEVLINK_DEV + + $MZ $h1 -c 1 -p 10 -a $h1mac -A 192.0.1.1 -t arp -q + + devlink sb occupancy snapshot $DEVLINK_DEV + + RET=0 + max_occ=$(sb_occ_itc_check $dl_port2 $SB_ITC $exp_max_occ) + check_err $? "Expected ingress TC($SB_ITC) max occupancy to be $exp_max_occ, but got $max_occ" + log_test "physical port's($h1) ingress TC - ARP packet" + + RET=0 + max_occ=$(sb_occ_itc_check $dl_port2 $SB_ITC $exp_max_occ) + check_err $? "Expected ingress TC($SB_ITC) max occupancy to be $exp_max_occ, but got $max_occ" + log_test "physical port's($h2) ingress TC - ARP packet" + + RET=0 + max_occ=$(sb_occ_etc_check $cpu_dl_port $SB_ITC_CPU_ARP $exp_max_occ) + check_err $? "Expected egress TC($SB_ITC_IP2ME) max occupancy to be $exp_max_occ, but got $max_occ" + log_test "CPU port's egress TC - ARP packet" +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + h2=${NETIFS[p2]} + + h1mac=$(mac_get $h1) + h2mac=$(mac_get $h2) + + dl_port1=$(devlink_port_by_netdev $h1) + dl_port2=$(devlink_port_by_netdev $h2) + + cpu_dl_port=$(devlink_cpu_port_get) + + vrf_prepare + + h1_create + h2_create +} + +cleanup() +{ + pre_cleanup + + h2_destroy + h1_destroy + + vrf_cleanup +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/sharedbuffer_configuration.py b/tools/testing/selftests/drivers/net/mlxsw/sharedbuffer_configuration.py new file mode 100755 index 000000000..2223337ee --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/sharedbuffer_configuration.py @@ -0,0 +1,416 @@ +#!/usr/bin/env python +# SPDX-License-Identifier: GPL-2.0 + +import subprocess +import json as j +import random + + +class SkipTest(Exception): + pass + + +class RandomValuePicker: + """ + Class for storing shared buffer configuration. Can handle 3 different + objects, pool, tcbind and portpool. Provide an interface to get random + values for a specific object type as the follow: + 1. Pool: + - random size + + 2. TcBind: + - random pool number + - random threshold + + 3. PortPool: + - random threshold + """ + def __init__(self, pools): + self._pools = [] + for pool in pools: + self._pools.append(pool) + + def _cell_size(self): + return self._pools[0]["cell_size"] + + def _get_static_size(self, th): + # For threshold of 16, this works out to be about 12MB on Spectrum-1, + # and about 17MB on Spectrum-2. + return th * 8000 * self._cell_size() + + def _get_size(self): + return self._get_static_size(16) + + def _get_thtype(self): + return "static" + + def _get_th(self, pool): + # Threshold value could be any integer between 3 to 16 + th = random.randint(3, 16) + if pool["thtype"] == "dynamic": + return th + else: + return self._get_static_size(th) + + def _get_pool(self, direction): + ing_pools = [] + egr_pools = [] + for pool in self._pools: + if pool["type"] == "ingress": + ing_pools.append(pool) + else: + egr_pools.append(pool) + if direction == "ingress": + arr = ing_pools + else: + arr = egr_pools + return arr[random.randint(0, len(arr) - 1)] + + def get_value(self, objid): + if isinstance(objid, Pool): + if objid["pool"] in [4, 8, 9, 10]: + # The threshold type of pools 4, 8, 9 and 10 cannot be changed + raise SkipTest() + else: + return (self._get_size(), self._get_thtype()) + if isinstance(objid, TcBind): + if objid["tc"] >= 8: + # Multicast TCs cannot be changed + raise SkipTest() + else: + pool = self._get_pool(objid["type"]) + th = self._get_th(pool) + pool_n = pool["pool"] + return (pool_n, th) + if isinstance(objid, PortPool): + pool_n = objid["pool"] + pool = self._pools[pool_n] + assert pool["pool"] == pool_n + th = self._get_th(pool) + return (th,) + + +class RecordValuePickerException(Exception): + pass + + +class RecordValuePicker: + """ + Class for storing shared buffer configuration. Can handle 2 different + objects, pool and tcbind. Provide an interface to get the stored values per + object type. + """ + def __init__(self, objlist): + self._recs = [] + for item in objlist: + self._recs.append({"objid": item, "value": item.var_tuple()}) + + def get_value(self, objid): + if isinstance(objid, Pool) and objid["pool"] in [4, 8, 9, 10]: + # The threshold type of pools 4, 8, 9 and 10 cannot be changed + raise SkipTest() + if isinstance(objid, TcBind) and objid["tc"] >= 8: + # Multicast TCs cannot be changed + raise SkipTest() + for rec in self._recs: + if rec["objid"].weak_eq(objid): + return rec["value"] + raise RecordValuePickerException() + + +def run_cmd(cmd, json=False): + out = subprocess.check_output(cmd, shell=True) + if json: + return j.loads(out) + return out + + +def run_json_cmd(cmd): + return run_cmd(cmd, json=True) + + +def log_test(test_name, err_msg=None): + if err_msg: + print("\t%s" % err_msg) + print("TEST: %-80s [FAIL]" % test_name) + else: + print("TEST: %-80s [ OK ]" % test_name) + + +class CommonItem(dict): + varitems = [] + + def var_tuple(self): + ret = [] + self.varitems.sort() + for key in self.varitems: + ret.append(self[key]) + return tuple(ret) + + def weak_eq(self, other): + for key in self: + if key in self.varitems: + continue + if self[key] != other[key]: + return False + return True + + +class CommonList(list): + def get_by(self, by_obj): + for item in self: + if item.weak_eq(by_obj): + return item + return None + + def del_by(self, by_obj): + for item in self: + if item.weak_eq(by_obj): + self.remove(item) + + +class Pool(CommonItem): + varitems = ["size", "thtype"] + + def dl_set(self, dlname, size, thtype): + run_cmd("devlink sb pool set {} sb {} pool {} size {} thtype {}".format(dlname, self["sb"], + self["pool"], + size, thtype)) + + +class PoolList(CommonList): + pass + + +def get_pools(dlname, direction=None): + d = run_json_cmd("devlink sb pool show -j") + pools = PoolList() + for pooldict in d["pool"][dlname]: + if not direction or direction == pooldict["type"]: + pools.append(Pool(pooldict)) + return pools + + +def do_check_pools(dlname, pools, vp): + for pool in pools: + pre_pools = get_pools(dlname) + try: + (size, thtype) = vp.get_value(pool) + except SkipTest: + continue + pool.dl_set(dlname, size, thtype) + post_pools = get_pools(dlname) + pool = post_pools.get_by(pool) + + err_msg = None + if pool["size"] != size: + err_msg = "Incorrect pool size (got {}, expected {})".format(pool["size"], size) + if pool["thtype"] != thtype: + err_msg = "Incorrect pool threshold type (got {}, expected {})".format(pool["thtype"], thtype) + + pre_pools.del_by(pool) + post_pools.del_by(pool) + if pre_pools != post_pools: + err_msg = "Other pool setup changed as well" + log_test("pool {} of sb {} set verification".format(pool["pool"], + pool["sb"]), err_msg) + + +def check_pools(dlname, pools): + # Save defaults + record_vp = RecordValuePicker(pools) + + # For each pool, set random size and static threshold type + do_check_pools(dlname, pools, RandomValuePicker(pools)) + + # Restore defaults + do_check_pools(dlname, pools, record_vp) + + +class TcBind(CommonItem): + varitems = ["pool", "threshold"] + + def __init__(self, port, d): + super(TcBind, self).__init__(d) + self["dlportname"] = port.name + + def dl_set(self, pool, th): + run_cmd("devlink sb tc bind set {} sb {} tc {} type {} pool {} th {}".format(self["dlportname"], + self["sb"], + self["tc"], + self["type"], + pool, th)) + + +class TcBindList(CommonList): + pass + + +def get_tcbinds(ports, verify_existence=False): + d = run_json_cmd("devlink sb tc bind show -j -n") + tcbinds = TcBindList() + for port in ports: + err_msg = None + if port.name not in d["tc_bind"] or len(d["tc_bind"][port.name]) == 0: + err_msg = "No tc bind for port" + else: + for tcbinddict in d["tc_bind"][port.name]: + tcbinds.append(TcBind(port, tcbinddict)) + if verify_existence: + log_test("tc bind existence for port {} verification".format(port.name), err_msg) + return tcbinds + + +def do_check_tcbind(ports, tcbinds, vp): + for tcbind in tcbinds: + pre_tcbinds = get_tcbinds(ports) + try: + (pool, th) = vp.get_value(tcbind) + except SkipTest: + continue + tcbind.dl_set(pool, th) + post_tcbinds = get_tcbinds(ports) + tcbind = post_tcbinds.get_by(tcbind) + + err_msg = None + if tcbind["pool"] != pool: + err_msg = "Incorrect pool (got {}, expected {})".format(tcbind["pool"], pool) + if tcbind["threshold"] != th: + err_msg = "Incorrect threshold (got {}, expected {})".format(tcbind["threshold"], th) + + pre_tcbinds.del_by(tcbind) + post_tcbinds.del_by(tcbind) + if pre_tcbinds != post_tcbinds: + err_msg = "Other tc bind setup changed as well" + log_test("tc bind {}-{} of sb {} set verification".format(tcbind["dlportname"], + tcbind["tc"], + tcbind["sb"]), err_msg) + + +def check_tcbind(dlname, ports, pools): + tcbinds = get_tcbinds(ports, verify_existence=True) + + # Save defaults + record_vp = RecordValuePicker(tcbinds) + + # Bind each port and unicast TC (TCs < 8) to a random pool and a random + # threshold + do_check_tcbind(ports, tcbinds, RandomValuePicker(pools)) + + # Restore defaults + do_check_tcbind(ports, tcbinds, record_vp) + + +class PortPool(CommonItem): + varitems = ["threshold"] + + def __init__(self, port, d): + super(PortPool, self).__init__(d) + self["dlportname"] = port.name + + def dl_set(self, th): + run_cmd("devlink sb port pool set {} sb {} pool {} th {}".format(self["dlportname"], + self["sb"], + self["pool"], th)) + + +class PortPoolList(CommonList): + pass + + +def get_portpools(ports, verify_existence=False): + d = run_json_cmd("devlink sb port pool -j -n") + portpools = PortPoolList() + for port in ports: + err_msg = None + if port.name not in d["port_pool"] or len(d["port_pool"][port.name]) == 0: + err_msg = "No port pool for port" + else: + for portpooldict in d["port_pool"][port.name]: + portpools.append(PortPool(port, portpooldict)) + if verify_existence: + log_test("port pool existence for port {} verification".format(port.name), err_msg) + return portpools + + +def do_check_portpool(ports, portpools, vp): + for portpool in portpools: + pre_portpools = get_portpools(ports) + (th,) = vp.get_value(portpool) + portpool.dl_set(th) + post_portpools = get_portpools(ports) + portpool = post_portpools.get_by(portpool) + + err_msg = None + if portpool["threshold"] != th: + err_msg = "Incorrect threshold (got {}, expected {})".format(portpool["threshold"], th) + + pre_portpools.del_by(portpool) + post_portpools.del_by(portpool) + if pre_portpools != post_portpools: + err_msg = "Other port pool setup changed as well" + log_test("port pool {}-{} of sb {} set verification".format(portpool["dlportname"], + portpool["pool"], + portpool["sb"]), err_msg) + + +def check_portpool(dlname, ports, pools): + portpools = get_portpools(ports, verify_existence=True) + + # Save defaults + record_vp = RecordValuePicker(portpools) + + # For each port pool, set a random threshold + do_check_portpool(ports, portpools, RandomValuePicker(pools)) + + # Restore defaults + do_check_portpool(ports, portpools, record_vp) + + +class Port: + def __init__(self, name): + self.name = name + + +class PortList(list): + pass + + +def get_ports(dlname): + d = run_json_cmd("devlink port show -j") + ports = PortList() + for name in d["port"]: + if name.find(dlname) == 0 and d["port"][name]["flavour"] == "physical": + ports.append(Port(name)) + return ports + + +def get_device(): + devices_info = run_json_cmd("devlink -j dev info")["info"] + for d in devices_info: + if "mlxsw_spectrum" in devices_info[d]["driver"]: + return d + return None + + +class UnavailableDevlinkNameException(Exception): + pass + + +def test_sb_configuration(): + # Use static seed + random.seed(0) + + dlname = get_device() + if not dlname: + raise UnavailableDevlinkNameException() + + ports = get_ports(dlname) + pools = get_pools(dlname) + + check_pools(dlname, pools) + check_tcbind(dlname, ports, pools) + check_portpool(dlname, ports, pools) + + +test_sb_configuration() diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/devlink_trap_tunnel_ipip6.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/devlink_trap_tunnel_ipip6.sh new file mode 100755 index 000000000..f62ce479c --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/devlink_trap_tunnel_ipip6.sh @@ -0,0 +1,250 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test devlink-trap tunnel exceptions functionality over mlxsw. +# Check all exception traps to make sure they are triggered under the right +# conditions. + +# +-------------------------+ +# | H1 | +# | $h1 + | +# | 2001:db8:1::1/64 | | +# +-------------------|-----+ +# | +# +-------------------|-----+ +# | SW1 | | +# | $swp1 + | +# | 2001:db8:1::2/64 | +# | | +# | + g1 (ip6gre) | +# | loc=2001:db8:3::1 | +# | rem=2001:db8:3::2 | +# | tos=inherit | +# | | +# | + $rp1 | +# | | 2001:db8:10::1/64 | +# +--|----------------------+ +# | +# +--|----------------------+ +# | | VRF2 | +# | + $rp2 | +# | 2001:db8:10::2/64 | +# +-------------------------+ + +lib_dir=$(dirname $0)/../../../../net/forwarding + +ALL_TESTS=" + decap_error_test +" + +NUM_NETIFS=4 +source $lib_dir/lib.sh +source $lib_dir/tc_common.sh +source $lib_dir/devlink_lib.sh + +h1_create() +{ + simple_if_init $h1 2001:db8:1::1/64 +} + +h1_destroy() +{ + simple_if_fini $h1 2001:db8:1::1/64 +} + +vrf2_create() +{ + simple_if_init $rp2 2001:db8:10::2/64 +} + +vrf2_destroy() +{ + simple_if_fini $rp2 2001:db8:10::2/64 +} + +switch_create() +{ + ip link set dev $swp1 up + __addr_add_del $swp1 add 2001:db8:1::2/64 + tc qdisc add dev $swp1 clsact + + tunnel_create g1 ip6gre 2001:db8:3::1 2001:db8:3::2 tos inherit \ + ttl inherit + ip link set dev g1 up + __addr_add_del g1 add 2001:db8:3::1/128 + + ip link set dev $rp1 up + __addr_add_del $rp1 add 2001:db8:10::1/64 +} + +switch_destroy() +{ + __addr_add_del $rp1 del 2001:db8:10::1/64 + ip link set dev $rp1 down + + __addr_add_del g1 del 2001:db8:3::1/128 + ip link set dev g1 down + tunnel_destroy g1 + + tc qdisc del dev $swp1 clsact + __addr_add_del $swp1 del 2001:db8:1::2/64 + ip link set dev $swp1 down +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + rp1=${NETIFS[p3]} + rp2=${NETIFS[p4]} + + forwarding_enable + vrf_prepare + h1_create + switch_create + vrf2_create +} + +cleanup() +{ + pre_cleanup + + vrf2_destroy + switch_destroy + h1_destroy + vrf_cleanup + forwarding_restore +} + +ipip_payload_get() +{ + local saddr="20:01:0d:b8:00:02:00:00:00:00:00:00:00:00:00:01" + local daddr="20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:01" + local flags=$1; shift + local key=$1; shift + + p=$(: + )"$flags"$( : GRE flags + )"0:00:"$( : Reserved + version + )"86:dd:"$( : ETH protocol type + )"$key"$( : Key + )"6"$( : IP version + )"0:0"$( : Traffic class + )"0:00:00:"$( : Flow label + )"00:00:"$( : Payload length + )"3a:"$( : Next header + )"04:"$( : Hop limit + )"$saddr:"$( : IP saddr + )"$daddr:"$( : IP daddr + ) + echo $p +} + +ecn_payload_get() +{ + echo $(ipip_payload_get "0") +} + +ecn_decap_test() +{ + local trap_name="decap_error" + local desc=$1; shift + local ecn_desc=$1; shift + local outer_tos=$1; shift + local mz_pid + + RET=0 + + tc filter add dev $swp1 egress protocol ipv6 pref 1 handle 101 \ + flower src_ip 2001:db8:2::1 dst_ip 2001:db8:1::1 skip_sw \ + action pass + + rp1_mac=$(mac_get $rp1) + rp2_mac=$(mac_get $rp2) + payload=$(ecn_payload_get) + + ip vrf exec v$rp2 $MZ -6 $rp2 -c 0 -d 1msec -a $rp2_mac -b $rp1_mac \ + -A 2001:db8:3::2 -B 2001:db8:3::1 -t ip \ + tos=$outer_tos,next=47,p=$payload -q & + mz_pid=$! + + devlink_trap_exception_test $trap_name + + tc_check_packets "dev $swp1 egress" 101 0 + check_err $? "Packets were not dropped" + + log_test "$desc: Inner ECN is not ECT and outer is $ecn_desc" + + kill $mz_pid && wait $mz_pid &> /dev/null + tc filter del dev $swp1 egress protocol ipv6 pref 1 handle 101 flower +} + +no_matching_tunnel_test() +{ + local trap_name="decap_error" + local desc=$1; shift + local sip=$1; shift + local mz_pid + + RET=0 + + tc filter add dev $swp1 egress protocol ipv6 pref 1 handle 101 \ + flower src_ip 2001:db8:2::1 dst_ip 2001:db8:1::1 action pass + + rp1_mac=$(mac_get $rp1) + rp2_mac=$(mac_get $rp2) + payload=$(ipip_payload_get "$@") + + ip vrf exec v$rp2 $MZ -6 $rp2 -c 0 -d 1msec -a $rp2_mac -b $rp1_mac \ + -A $sip -B 2001:db8:3::1 -t ip next=47,p=$payload -q & + mz_pid=$! + + devlink_trap_exception_test $trap_name + + tc_check_packets "dev $swp1 egress" 101 0 + check_err $? "Packets were not dropped" + + log_test "$desc" + + kill $mz_pid && wait $mz_pid &> /dev/null + tc filter del dev $swp1 egress protocol ipv6 pref 1 handle 101 flower +} + +decap_error_test() +{ + # Correct source IP - the remote address + local sip=2001:db8:3::2 + + ecn_decap_test "Decap error" "ECT(1)" 01 + ecn_decap_test "Decap error" "ECT(0)" 02 + ecn_decap_test "Decap error" "CE" 03 + + no_matching_tunnel_test "Decap error: Source IP check failed" \ + 2001:db8:4::2 "0" + no_matching_tunnel_test \ + "Decap error: Key exists but was not expected" $sip "2" \ + "00:00:00:E9:" + + # Destroy the tunnel and create new one with key + __addr_add_del g1 del 2001:db8:3::1/128 + tunnel_destroy g1 + + tunnel_create g1 ip6gre 2001:db8:3::1 2001:db8:3::2 tos inherit \ + ttl inherit key 233 + __addr_add_del g1 add 2001:db8:3::1/128 + + no_matching_tunnel_test \ + "Decap error: Key does not exist but was expected" $sip "0" + no_matching_tunnel_test \ + "Decap error: Packet has a wrong key field" $sip "2" \ + "00:00:00:E8:" +} + +trap cleanup EXIT + +setup_prepare +setup_wait +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/mirror_gre_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/mirror_gre_scale.sh new file mode 100644 index 000000000..f7c168dec --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/mirror_gre_scale.sh @@ -0,0 +1,16 @@ +# SPDX-License-Identifier: GPL-2.0 +source ../mirror_gre_scale.sh + +mirror_gre_get_target() +{ + local should_fail=$1; shift + local target + + target=$(devlink_resource_size_get span_agents) + + if ((! should_fail)); then + echo $target + else + echo $((target + 1)) + fi +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/port_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/port_scale.sh new file mode 100644 index 000000000..0b71dfbbb --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/port_scale.sh @@ -0,0 +1,16 @@ +# SPDX-License-Identifier: GPL-2.0 +source ../port_scale.sh + +port_get_target() +{ + local should_fail=$1 + local target + + target=$(devlink_resource_size_get physical_ports) + + if ((! should_fail)); then + echo $target + else + echo $((target + 1)) + fi +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/resource_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/resource_scale.sh new file mode 100755 index 000000000..688338bbe --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/resource_scale.sh @@ -0,0 +1,79 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +lib_dir=$(dirname $0)/../../../../net/forwarding + +NUM_NETIFS=6 +source $lib_dir/lib.sh +source $lib_dir/tc_common.sh +source $lib_dir/devlink_lib.sh +source ../mlxsw_lib.sh + +mlxsw_only_on_spectrum 2+ || exit 1 + +current_test="" + +cleanup() +{ + pre_cleanup + if [ ! -z $current_test ]; then + ${current_test}_cleanup + fi + # Need to reload in order to avoid router abort. + devlink_reload +} + +trap cleanup EXIT + +ALL_TESTS=" + router + tc_flower + mirror_gre + tc_police + port + rif_mac_profile + rif_counter +" + +for current_test in ${TESTS:-$ALL_TESTS}; do + RET_FIN=0 + source ${current_test}_scale.sh + + num_netifs_var=${current_test^^}_NUM_NETIFS + num_netifs=${!num_netifs_var:-$NUM_NETIFS} + + for should_fail in 0 1; do + RET=0 + target=$(${current_test}_get_target "$should_fail") + if ((target == 0)); then + log_test_skip "'$current_test' should_fail=$should_fail test" + continue + fi + + ${current_test}_setup_prepare + setup_wait $num_netifs + # Update target in case occupancy of a certain resource changed + # following the test setup. + target=$(${current_test}_get_target "$should_fail") + ${current_test}_test "$target" "$should_fail" + if [[ "$should_fail" -eq 0 ]]; then + log_test "'$current_test' $target" + + if ((!RET)); then + tt=${current_test}_traffic_test + if [[ $(type -t $tt) == "function" ]]; then + $tt "$target" + log_test "'$current_test' $target traffic test" + fi + fi + else + log_test "'$current_test' overflow $target" + fi + ${current_test}_cleanup $target + devlink_reload + RET_FIN=$(( RET_FIN || RET )) + done +done +current_test="" + +exit "$RET_FIN" diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/rif_counter_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/rif_counter_scale.sh new file mode 120000 index 000000000..1f5752e8f --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/rif_counter_scale.sh @@ -0,0 +1 @@ +../spectrum/rif_counter_scale.sh
\ No newline at end of file diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/rif_mac_profile_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/rif_mac_profile_scale.sh new file mode 100644 index 000000000..303d7cbe3 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/rif_mac_profile_scale.sh @@ -0,0 +1,16 @@ +# SPDX-License-Identifier: GPL-2.0 +source ../rif_mac_profile_scale.sh + +rif_mac_profile_get_target() +{ + local should_fail=$1 + local target + + target=$(devlink_resource_size_get rif_mac_profiles) + + if ((! should_fail)); then + echo $target + else + echo $((target + 1)) + fi +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/router_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/router_scale.sh new file mode 100644 index 000000000..1897e163e --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/router_scale.sh @@ -0,0 +1,18 @@ +# SPDX-License-Identifier: GPL-2.0 +source ../router_scale.sh + +router_get_target() +{ + local should_fail=$1 + local target + + target=$(devlink_resource_size_get kvd) + + if [[ $should_fail -eq 0 ]]; then + target=$((target * 85 / 100)) + else + target=$((target + 1)) + fi + + echo $target +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh new file mode 100755 index 000000000..7bf56ea16 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh @@ -0,0 +1,1075 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# This test is for checking the A-TCAM and C-TCAM operation in Spectrum-2. +# It tries to exercise as many code paths in the eRP state machine as +# possible. + +lib_dir=$(dirname $0)/../../../../net/forwarding + +ALL_TESTS="single_mask_test identical_filters_test two_masks_test \ + multiple_masks_test ctcam_edge_cases_test delta_simple_test \ + delta_two_masks_one_key_test delta_simple_rehash_test \ + bloom_simple_test bloom_complex_test bloom_delta_test \ + max_erp_entries_test" +NUM_NETIFS=2 +source $lib_dir/lib.sh +source $lib_dir/tc_common.sh +source $lib_dir/devlink_lib.sh + +tcflags="skip_hw" + +h1_create() +{ + simple_if_init $h1 192.0.2.1/24 198.51.100.1/24 +} + +h1_destroy() +{ + simple_if_fini $h1 192.0.2.1/24 198.51.100.1/24 +} + +h2_create() +{ + simple_if_init $h2 192.0.2.2/24 198.51.100.2/24 + tc qdisc add dev $h2 clsact +} + +h2_destroy() +{ + tc qdisc del dev $h2 clsact + simple_if_fini $h2 192.0.2.2/24 198.51.100.2/24 +} + +tp_record() +{ + local tracepoint=$1 + local cmd=$2 + + perf record -q -e $tracepoint $cmd + return $? +} + +tp_record_all() +{ + local tracepoint=$1 + local seconds=$2 + + perf record -a -q -e $tracepoint sleep $seconds + return $? +} + +__tp_hit_count() +{ + local tracepoint=$1 + + local perf_output=`perf script -F trace:event,trace` + return `echo $perf_output | grep "$tracepoint:" | wc -l` +} + +tp_check_hits() +{ + local tracepoint=$1 + local count=$2 + + __tp_hit_count $tracepoint + if [[ "$?" -ne "$count" ]]; then + return 1 + fi + return 0 +} + +tp_check_hits_any() +{ + local tracepoint=$1 + + __tp_hit_count $tracepoint + if [[ "$?" -eq "0" ]]; then + return 1 + fi + return 0 +} + +single_mask_test() +{ + # When only a single mask is required, the device uses the master + # mask and not the eRP table. Verify that under this mode the right + # filter is matched + + RET=0 + + tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \ + $tcflags dst_ip 192.0.2.2 action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 101 1 + check_err $? "Single filter - did not match" + + tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \ + $tcflags dst_ip 198.51.100.2 action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 101 2 + check_err $? "Two filters - did not match highest priority" + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 198.51.100.1 -B 198.51.100.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 102 1 + check_err $? "Two filters - did not match lowest priority" + + tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 198.51.100.1 -B 198.51.100.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 102 2 + check_err $? "Single filter - did not match after delete" + + tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower + + log_test "single mask test ($tcflags)" +} + +identical_filters_test() +{ + # When two filters that only differ in their priority are used, + # one needs to be inserted into the C-TCAM. This test verifies + # that filters are correctly spilled to C-TCAM and that the right + # filter is matched + + RET=0 + + tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \ + $tcflags dst_ip 192.0.2.2 action drop + tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \ + $tcflags dst_ip 192.0.2.2 action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 101 1 + check_err $? "Did not match A-TCAM filter" + + tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 102 1 + check_err $? "Did not match C-TCAM filter after A-TCAM delete" + + tc filter add dev $h2 ingress protocol ip pref 3 handle 103 flower \ + $tcflags dst_ip 192.0.2.2 action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 102 2 + check_err $? "Did not match C-TCAM filter after A-TCAM add" + + tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 103 1 + check_err $? "Did not match A-TCAM filter after C-TCAM delete" + + tc filter del dev $h2 ingress protocol ip pref 3 handle 103 flower + + log_test "identical filters test ($tcflags)" +} + +two_masks_test() +{ + # When more than one mask is required, the eRP table is used. This + # test verifies that the eRP table is correctly allocated and used + + RET=0 + + tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \ + $tcflags dst_ip 192.0.2.2 action drop + tc filter add dev $h2 ingress protocol ip pref 3 handle 103 flower \ + $tcflags dst_ip 192.0.0.0/8 action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 101 1 + check_err $? "Two filters - did not match highest priority" + + tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 103 1 + check_err $? "Single filter - did not match" + + tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \ + $tcflags dst_ip 192.0.2.0/24 action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 102 1 + check_err $? "Two filters - did not match highest priority after add" + + tc filter del dev $h2 ingress protocol ip pref 3 handle 103 flower + tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower + + log_test "two masks test ($tcflags)" +} + +multiple_masks_test() +{ + # The number of masks in a region is limited. Once the maximum + # number of masks has been reached filters that require new + # masks are spilled to the C-TCAM. This test verifies that + # spillage is performed correctly and that the right filter is + # matched + + if [[ "$tcflags" != "skip_sw" ]]; then + return 0; + fi + + local index + + RET=0 + + NUM_MASKS=32 + NUM_ERPS=16 + BASE_INDEX=100 + + for i in $(eval echo {1..$NUM_MASKS}); do + index=$((BASE_INDEX - i)) + + if ((i > NUM_ERPS)); then + exp_hits=1 + err_msg="$i filters - C-TCAM spill did not happen when it was expected" + else + exp_hits=0 + err_msg="$i filters - C-TCAM spill happened when it should not" + fi + + tp_record "mlxsw:mlxsw_sp_acl_atcam_entry_add_ctcam_spill" \ + "tc filter add dev $h2 ingress protocol ip pref $index \ + handle $index \ + flower $tcflags \ + dst_ip 192.0.2.2/${i} src_ip 192.0.2.1/${i} \ + action drop" + tp_check_hits "mlxsw:mlxsw_sp_acl_atcam_entry_add_ctcam_spill" \ + $exp_hits + check_err $? "$err_msg" + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 \ + -B 192.0.2.2 -t ip -q + + tc_check_packets "dev $h2 ingress" $index 1 + check_err $? "$i filters - did not match highest priority (add)" + done + + for i in $(eval echo {$NUM_MASKS..1}); do + index=$((BASE_INDEX - i)) + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 \ + -B 192.0.2.2 -t ip -q + + tc_check_packets "dev $h2 ingress" $index 2 + check_err $? "$i filters - did not match highest priority (del)" + + tc filter del dev $h2 ingress protocol ip pref $index \ + handle $index flower + done + + log_test "multiple masks test ($tcflags)" +} + +ctcam_two_atcam_masks_test() +{ + RET=0 + + # First case: C-TCAM is disabled when there are two A-TCAM masks. + # We push a filter into the C-TCAM by using two identical filters + # as in identical_filters_test() + + # Filter goes into A-TCAM + tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \ + $tcflags dst_ip 192.0.2.2 action drop + # Filter goes into C-TCAM + tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \ + $tcflags dst_ip 192.0.2.2 action drop + # Filter goes into A-TCAM + tc filter add dev $h2 ingress protocol ip pref 3 handle 103 flower \ + $tcflags dst_ip 192.0.0.0/16 action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 101 1 + check_err $? "Did not match A-TCAM filter" + + # Delete both A-TCAM and C-TCAM filters and make sure the remaining + # A-TCAM filter still works + tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower + tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 103 1 + check_err $? "Did not match A-TCAM filter" + + tc filter del dev $h2 ingress protocol ip pref 3 handle 103 flower + + log_test "ctcam with two atcam masks test ($tcflags)" +} + +ctcam_one_atcam_mask_test() +{ + RET=0 + + # Second case: C-TCAM is disabled when there is one A-TCAM mask. + # The test is similar to identical_filters_test() + + # Filter goes into A-TCAM + tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \ + $tcflags dst_ip 192.0.2.2 action drop + # Filter goes into C-TCAM + tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \ + $tcflags dst_ip 192.0.2.2 action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 101 1 + check_err $? "Did not match C-TCAM filter" + + tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 102 1 + check_err $? "Did not match A-TCAM filter" + + tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower + + log_test "ctcam with one atcam mask test ($tcflags)" +} + +ctcam_no_atcam_masks_test() +{ + RET=0 + + # Third case: C-TCAM is disabled when there are no A-TCAM masks + # This test exercises the code path that transitions the eRP table + # to its initial state after deleting the last C-TCAM mask + + # Filter goes into A-TCAM + tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \ + $tcflags dst_ip 192.0.2.2 action drop + # Filter goes into C-TCAM + tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \ + $tcflags dst_ip 192.0.2.2 action drop + + tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower + tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower + + log_test "ctcam with no atcam masks test ($tcflags)" +} + +ctcam_edge_cases_test() +{ + # When the C-TCAM is disabled after deleting the last C-TCAM + # mask, we want to make sure the eRP state machine is put in + # the correct state + + ctcam_two_atcam_masks_test + ctcam_one_atcam_mask_test + ctcam_no_atcam_masks_test +} + +delta_simple_test() +{ + # The first filter will create eRP, the second filter will fit into + # the first eRP with delta. Remove the first rule then and check that + # the eRP stays (referenced by the second filter). + + RET=0 + + if [[ "$tcflags" != "skip_sw" ]]; then + return 0; + fi + + tp_record "objagg:*" "tc filter add dev $h2 ingress protocol ip \ + pref 1 handle 101 flower $tcflags dst_ip 192.0.0.0/24 \ + action drop" + tp_check_hits "objagg:objagg_obj_root_create" 1 + check_err $? "eRP was not created" + + tp_record "objagg:*" "tc filter add dev $h2 ingress protocol ip \ + pref 2 handle 102 flower $tcflags dst_ip 192.0.2.2 \ + action drop" + tp_check_hits "objagg:objagg_obj_root_create" 0 + check_err $? "eRP was incorrectly created" + tp_check_hits "objagg:objagg_obj_parent_assign" 1 + check_err $? "delta was not created" + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 101 1 + check_fail $? "Matched a wrong filter" + + tc_check_packets "dev $h2 ingress" 102 1 + check_err $? "Did not match on correct filter" + + tp_record "objagg:*" "tc filter del dev $h2 ingress protocol ip \ + pref 1 handle 101 flower" + tp_check_hits "objagg:objagg_obj_root_destroy" 0 + check_err $? "eRP was incorrectly destroyed" + tp_check_hits "objagg:objagg_obj_parent_unassign" 0 + check_err $? "delta was incorrectly destroyed" + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 102 2 + check_err $? "Did not match on correct filter after the first was removed" + + tp_record "objagg:*" "tc filter del dev $h2 ingress protocol ip \ + pref 2 handle 102 flower" + tp_check_hits "objagg:objagg_obj_parent_unassign" 1 + check_err $? "delta was not destroyed" + tp_check_hits "objagg:objagg_obj_root_destroy" 1 + check_err $? "eRP was not destroyed" + + log_test "delta simple test ($tcflags)" +} + +delta_two_masks_one_key_test() +{ + # If 2 keys are the same and only differ in mask in a way that + # they belong under the same ERP (second is delta of the first), + # there should be no C-TCAM spill. + + RET=0 + + if [[ "$tcflags" != "skip_sw" ]]; then + return 0; + fi + + tp_record "mlxsw:*" "tc filter add dev $h2 ingress protocol ip \ + pref 1 handle 101 flower $tcflags dst_ip 192.0.2.0/24 \ + action drop" + tp_check_hits "mlxsw:mlxsw_sp_acl_atcam_entry_add_ctcam_spill" 0 + check_err $? "incorrect C-TCAM spill while inserting the first rule" + + tp_record "mlxsw:*" "tc filter add dev $h2 ingress protocol ip \ + pref 2 handle 102 flower $tcflags dst_ip 192.0.2.2 \ + action drop" + tp_check_hits "mlxsw:mlxsw_sp_acl_atcam_entry_add_ctcam_spill" 0 + check_err $? "incorrect C-TCAM spill while inserting the second rule" + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 101 1 + check_err $? "Did not match on correct filter" + + tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 102 1 + check_err $? "Did not match on correct filter" + + tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower + + log_test "delta two masks one key test ($tcflags)" +} + +delta_simple_rehash_test() +{ + RET=0 + + if [[ "$tcflags" != "skip_sw" ]]; then + return 0; + fi + + devlink dev param set $DEVLINK_DEV \ + name acl_region_rehash_interval cmode runtime value 0 + check_err $? "Failed to set ACL region rehash interval" + + tp_record_all mlxsw:mlxsw_sp_acl_tcam_vregion_rehash 7 + tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_rehash + check_fail $? "Rehash trace was hit even when rehash should be disabled" + + devlink dev param set $DEVLINK_DEV \ + name acl_region_rehash_interval cmode runtime value 3000 + check_err $? "Failed to set ACL region rehash interval" + + sleep 1 + + tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \ + $tcflags dst_ip 192.0.1.0/25 action drop + tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \ + $tcflags dst_ip 192.0.2.2 action drop + tc filter add dev $h2 ingress protocol ip pref 3 handle 103 flower \ + $tcflags dst_ip 192.0.3.0/24 action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 101 1 + check_fail $? "Matched a wrong filter" + + tc_check_packets "dev $h2 ingress" 103 1 + check_fail $? "Matched a wrong filter" + + tc_check_packets "dev $h2 ingress" 102 1 + check_err $? "Did not match on correct filter" + + tp_record_all mlxsw:* 3 + tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_rehash + check_err $? "Rehash trace was not hit" + tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_migrate + check_err $? "Migrate trace was not hit" + tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_migrate_end + check_err $? "Migrate end trace was not hit" + tp_record_all mlxsw:* 3 + tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_rehash + check_err $? "Rehash trace was not hit" + tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_migrate + check_fail $? "Migrate trace was hit when no migration should happen" + tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_migrate_end + check_fail $? "Migrate end trace was hit when no migration should happen" + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 101 1 + check_fail $? "Matched a wrong filter after rehash" + + tc_check_packets "dev $h2 ingress" 103 1 + check_fail $? "Matched a wrong filter after rehash" + + tc_check_packets "dev $h2 ingress" 102 2 + check_err $? "Did not match on correct filter after rehash" + + tc filter del dev $h2 ingress protocol ip pref 3 handle 103 flower + tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower + tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower + + log_test "delta simple rehash test ($tcflags)" +} + +delta_simple_ipv6_rehash_test() +{ + RET=0 + + if [[ "$tcflags" != "skip_sw" ]]; then + return 0; + fi + + devlink dev param set $DEVLINK_DEV \ + name acl_region_rehash_interval cmode runtime value 0 + check_err $? "Failed to set ACL region rehash interval" + + tp_record_all mlxsw:mlxsw_sp_acl_tcam_vregion_rehash 7 + tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_rehash + check_fail $? "Rehash trace was hit even when rehash should be disabled" + + devlink dev param set $DEVLINK_DEV \ + name acl_region_rehash_interval cmode runtime value 3000 + check_err $? "Failed to set ACL region rehash interval" + + sleep 1 + + tc filter add dev $h2 ingress protocol ipv6 pref 1 handle 101 flower \ + $tcflags dst_ip 2001:db8:1::0/121 action drop + tc filter add dev $h2 ingress protocol ipv6 pref 2 handle 102 flower \ + $tcflags dst_ip 2001:db8:2::2 action drop + tc filter add dev $h2 ingress protocol ipv6 pref 3 handle 103 flower \ + $tcflags dst_ip 2001:db8:3::0/120 action drop + + $MZ $h1 -6 -c 1 -p 64 -a $h1mac -b $h2mac \ + -A 2001:db8:2::1 -B 2001:db8:2::2 -t udp -q + + tc_check_packets "dev $h2 ingress" 101 1 + check_fail $? "Matched a wrong filter" + + tc_check_packets "dev $h2 ingress" 103 1 + check_fail $? "Matched a wrong filter" + + tc_check_packets "dev $h2 ingress" 102 1 + check_err $? "Did not match on correct filter" + + tp_record_all mlxsw:* 3 + tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_rehash + check_err $? "Rehash trace was not hit" + tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_migrate + check_err $? "Migrate trace was not hit" + tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_migrate_end + check_err $? "Migrate end trace was not hit" + tp_record_all mlxsw:* 3 + tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_rehash + check_err $? "Rehash trace was not hit" + tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_migrate + check_fail $? "Migrate trace was hit when no migration should happen" + tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_migrate_end + check_fail $? "Migrate end trace was hit when no migration should happen" + + $MZ $h1 -6 -c 1 -p 64 -a $h1mac -b $h2mac \ + -A 2001:db8:2::1 -B 2001:db8:2::2 -t udp -q + + tc_check_packets "dev $h2 ingress" 101 1 + check_fail $? "Matched a wrong filter after rehash" + + tc_check_packets "dev $h2 ingress" 103 1 + check_fail $? "Matched a wrong filter after rehash" + + tc_check_packets "dev $h2 ingress" 102 2 + check_err $? "Did not match on correct filter after rehash" + + tc filter del dev $h2 ingress protocol ipv6 pref 3 handle 103 flower + tc filter del dev $h2 ingress protocol ipv6 pref 2 handle 102 flower + tc filter del dev $h2 ingress protocol ipv6 pref 1 handle 101 flower + + log_test "delta simple IPv6 rehash test ($tcflags)" +} + +TEST_RULE_BASE=256 +declare -a test_rules_inserted + +test_rule_add() +{ + local iface=$1 + local tcflags=$2 + local index=$3 + + if ! [ ${test_rules_inserted[$index]} ] ; then + test_rules_inserted[$index]=false + fi + if ${test_rules_inserted[$index]} ; then + return + fi + + local number=$(( $index + $TEST_RULE_BASE )) + printf -v hexnumber '%x' $number + + batch="${batch}filter add dev $iface ingress protocol ipv6 pref 1 \ + handle $number flower $tcflags \ + src_ip 2001:db8:1::$hexnumber action drop\n" + test_rules_inserted[$index]=true +} + +test_rule_del() +{ + local iface=$1 + local index=$2 + + if ! [ ${test_rules_inserted[$index]} ] ; then + test_rules_inserted[$index]=false + fi + if ! ${test_rules_inserted[$index]} ; then + return + fi + + local number=$(( $index + $TEST_RULE_BASE )) + printf -v hexnumber '%x' $number + + batch="${batch}filter del dev $iface ingress protocol ipv6 pref 1 \ + handle $number flower\n" + test_rules_inserted[$index]=false +} + +test_rule_add_or_remove() +{ + local iface=$1 + local tcflags=$2 + local index=$3 + + if ! [ ${test_rules_inserted[$index]} ] ; then + test_rules_inserted[$index]=false + fi + if ${test_rules_inserted[$index]} ; then + test_rule_del $iface $index + else + test_rule_add $iface $tcflags $index + fi +} + +test_rule_add_or_remove_random_batch() +{ + local iface=$1 + local tcflags=$2 + local total_count=$3 + local skip=0 + local count=0 + local MAXSKIP=20 + local MAXCOUNT=20 + + for ((i=1;i<=total_count;i++)); do + if (( $skip == 0 )) && (($count == 0)); then + ((skip=$RANDOM % $MAXSKIP + 1)) + ((count=$RANDOM % $MAXCOUNT + 1)) + fi + if (( $skip != 0 )); then + ((skip-=1)) + else + ((count-=1)) + test_rule_add_or_remove $iface $tcflags $i + fi + done +} + +delta_massive_ipv6_rehash_test() +{ + RET=0 + + if [[ "$tcflags" != "skip_sw" ]]; then + return 0; + fi + + devlink dev param set $DEVLINK_DEV \ + name acl_region_rehash_interval cmode runtime value 0 + check_err $? "Failed to set ACL region rehash interval" + + tp_record_all mlxsw:mlxsw_sp_acl_tcam_vregion_rehash 7 + tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_rehash + check_fail $? "Rehash trace was hit even when rehash should be disabled" + + RANDOM=4432897 + declare batch="" + test_rule_add_or_remove_random_batch $h2 $tcflags 5000 + + echo -n -e $batch | tc -b - + + declare batch="" + test_rule_add_or_remove_random_batch $h2 $tcflags 5000 + + devlink dev param set $DEVLINK_DEV \ + name acl_region_rehash_interval cmode runtime value 3000 + check_err $? "Failed to set ACL region rehash interval" + + sleep 1 + + tc filter add dev $h2 ingress protocol ipv6 pref 1 handle 101 flower \ + $tcflags dst_ip 2001:db8:1::0/121 action drop + tc filter add dev $h2 ingress protocol ipv6 pref 2 handle 102 flower \ + $tcflags dst_ip 2001:db8:2::2 action drop + tc filter add dev $h2 ingress protocol ipv6 pref 3 handle 103 flower \ + $tcflags dst_ip 2001:db8:3::0/120 action drop + + $MZ $h1 -6 -c 1 -p 64 -a $h1mac -b $h2mac \ + -A 2001:db8:2::1 -B 2001:db8:2::2 -t udp -q + + tc_check_packets "dev $h2 ingress" 101 1 + check_fail $? "Matched a wrong filter" + + tc_check_packets "dev $h2 ingress" 103 1 + check_fail $? "Matched a wrong filter" + + tc_check_packets "dev $h2 ingress" 102 1 + check_err $? "Did not match on correct filter" + + echo -n -e $batch | tc -b - + + devlink dev param set $DEVLINK_DEV \ + name acl_region_rehash_interval cmode runtime value 0 + check_err $? "Failed to set ACL region rehash interval" + + $MZ $h1 -6 -c 1 -p 64 -a $h1mac -b $h2mac \ + -A 2001:db8:2::1 -B 2001:db8:2::2 -t udp -q + + tc_check_packets "dev $h2 ingress" 101 1 + check_fail $? "Matched a wrong filter after rehash" + + tc_check_packets "dev $h2 ingress" 103 1 + check_fail $? "Matched a wrong filter after rehash" + + tc_check_packets "dev $h2 ingress" 102 2 + check_err $? "Did not match on correct filter after rehash" + + tc filter del dev $h2 ingress protocol ipv6 pref 3 handle 103 flower + tc filter del dev $h2 ingress protocol ipv6 pref 2 handle 102 flower + tc filter del dev $h2 ingress protocol ipv6 pref 1 handle 101 flower + + declare batch="" + for i in {1..5000}; do + test_rule_del $h2 $tcflags $i + done + echo -e $batch | tc -b - + + log_test "delta massive IPv6 rehash test ($tcflags)" +} + +bloom_simple_test() +{ + # Bloom filter requires that the eRP table is used. This test + # verifies that Bloom filter is not harming correctness of ACLs. + # First, make sure that eRP table is used and then set rule patterns + # which are distant enough and will result skipping a lookup after + # consulting the Bloom filter. Although some eRP lookups are skipped, + # the correct filter should be hit. + + RET=0 + + tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \ + $tcflags dst_ip 192.0.2.2 action drop + tc filter add dev $h2 ingress protocol ip pref 5 handle 104 flower \ + $tcflags dst_ip 198.51.100.2 action drop + tc filter add dev $h2 ingress protocol ip pref 3 handle 103 flower \ + $tcflags dst_ip 192.0.0.0/8 action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 101 1 + check_err $? "Two filters - did not match highest priority" + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 198.51.100.1 -B 198.51.100.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 104 1 + check_err $? "Single filter - did not match" + + tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 103 1 + check_err $? "Low prio filter - did not match" + + tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \ + $tcflags dst_ip 198.0.0.0/8 action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 198.51.100.1 -B 198.51.100.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 102 1 + check_err $? "Two filters - did not match highest priority after add" + + tc filter del dev $h2 ingress protocol ip pref 3 handle 103 flower + tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower + tc filter del dev $h2 ingress protocol ip pref 5 handle 104 flower + + log_test "bloom simple test ($tcflags)" +} + +bloom_complex_test() +{ + # Bloom filter index computation is affected from region ID, eRP + # ID and from the region key size. In order to excercise those parts + # of the Bloom filter code, use a series of regions, each with a + # different key size and send packet that should hit all of them. + local index + + RET=0 + NUM_CHAINS=4 + BASE_INDEX=100 + + # Create chain with up to 2 key blocks (ip_proto only) + tc chain add dev $h2 ingress chain 1 protocol ip flower \ + ip_proto tcp &> /dev/null + # Create chain with 2-4 key blocks (ip_proto, src MAC) + tc chain add dev $h2 ingress chain 2 protocol ip flower \ + ip_proto tcp \ + src_mac 00:00:00:00:00:00/FF:FF:FF:FF:FF:FF &> /dev/null + # Create chain with 4-8 key blocks (ip_proto, src & dst MAC, IPv4 dest) + tc chain add dev $h2 ingress chain 3 protocol ip flower \ + ip_proto tcp \ + dst_mac 00:00:00:00:00:00/FF:FF:FF:FF:FF:FF \ + src_mac 00:00:00:00:00:00/FF:FF:FF:FF:FF:FF \ + dst_ip 0.0.0.0/32 &> /dev/null + # Default chain contains all fields and therefore is 8-12 key blocks + tc chain add dev $h2 ingress chain 4 + + # We need at least 2 rules in every region to have eRP table active + # so create a dummy rule per chain using a different pattern + for i in $(eval echo {0..$NUM_CHAINS}); do + index=$((BASE_INDEX - 1 - i)) + tc filter add dev $h2 ingress chain $i protocol ip \ + pref 2 handle $index flower \ + $tcflags ip_proto tcp action drop + done + + # Add rules to test Bloom filter, each in a different chain + index=$BASE_INDEX + tc filter add dev $h2 ingress protocol ip \ + pref 1 handle $((++index)) flower \ + $tcflags dst_ip 192.0.0.0/16 action goto chain 1 + tc filter add dev $h2 ingress chain 1 protocol ip \ + pref 1 handle $((++index)) flower \ + $tcflags action goto chain 2 + tc filter add dev $h2 ingress chain 2 protocol ip \ + pref 1 handle $((++index)) flower \ + $tcflags src_mac $h1mac action goto chain 3 + tc filter add dev $h2 ingress chain 3 protocol ip \ + pref 1 handle $((++index)) flower \ + $tcflags dst_ip 192.0.0.0/8 action goto chain 4 + tc filter add dev $h2 ingress chain 4 protocol ip \ + pref 1 handle $((++index)) flower \ + $tcflags src_ip 192.0.2.0/24 action drop + + # Send a packet that is supposed to hit all chains + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + for i in $(eval echo {0..$NUM_CHAINS}); do + index=$((BASE_INDEX + i + 1)) + tc_check_packets "dev $h2 ingress" $index 1 + check_err $? "Did not match chain $i" + done + + # Rules cleanup + for i in $(eval echo {$NUM_CHAINS..0}); do + index=$((BASE_INDEX - i - 1)) + tc filter del dev $h2 ingress chain $i \ + pref 2 handle $index flower + index=$((BASE_INDEX + i + 1)) + tc filter del dev $h2 ingress chain $i \ + pref 1 handle $index flower + done + + # Chains cleanup + for i in $(eval echo {$NUM_CHAINS..1}); do + tc chain del dev $h2 ingress chain $i + done + + log_test "bloom complex test ($tcflags)" +} + + +bloom_delta_test() +{ + # When multiple masks are used, the eRP table is activated. When + # masks are close enough (delta) the masks reside on the same + # eRP table. This test verifies that the eRP table is correctly + # allocated and used in delta condition and that Bloom filter is + # still functional with delta. + + RET=0 + + tc filter add dev $h2 ingress protocol ip pref 3 handle 103 flower \ + $tcflags dst_ip 192.1.0.0/16 action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.1.2.1 -B 192.1.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 103 1 + check_err $? "Single filter - did not match" + + tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \ + $tcflags dst_ip 192.2.1.0/24 action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.2.1.1 -B 192.2.1.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 102 1 + check_err $? "Delta filters - did not match second filter" + + tc filter del dev $h2 ingress protocol ip pref 3 handle 103 flower + tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower + + log_test "bloom delta test ($tcflags)" +} + +max_erp_entries_test() +{ + # The number of eRP entries is limited. Once the maximum number of eRPs + # has been reached, filters cannot be added. This test verifies that + # when this limit is reached, inserstion fails without crashing. + + RET=0 + + local num_masks=32 + local num_regions=15 + local chain_failed + local mask_failed + local ret + + if [[ "$tcflags" != "skip_sw" ]]; then + return 0; + fi + + for ((i=1; i < $num_regions; i++)); do + for ((j=$num_masks; j >= 0; j--)); do + tc filter add dev $h2 ingress chain $i protocol ip \ + pref $i handle $j flower $tcflags \ + dst_ip 192.1.0.0/$j &> /dev/null + ret=$? + + if [ $ret -ne 0 ]; then + chain_failed=$i + mask_failed=$j + break 2 + fi + done + done + + # We expect to exceed the maximum number of eRP entries, so that + # insertion eventually fails. Otherwise, the test should be adjusted to + # add more filters. + check_fail $ret "expected to exceed number of eRP entries" + + for ((; i >= 1; i--)); do + for ((j=0; j <= $num_masks; j++)); do + tc filter del dev $h2 ingress chain $i protocol ip \ + pref $i handle $j flower &> /dev/null + done + done + + log_test "max eRP entries test ($tcflags). " \ + "max chain $chain_failed, mask $mask_failed" +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + h2=${NETIFS[p2]} + h1mac=$(mac_get $h1) + h2mac=$(mac_get $h2) + + vrf_prepare + + h1_create + h2_create +} + +cleanup() +{ + pre_cleanup + + h2_destroy + h1_destroy + + vrf_cleanup +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +if ! tc_offload_check; then + check_err 1 "Could not test offloaded functionality" + log_test "mlxsw-specific tests for tc flower" + exit +else + tcflags="skip_sw" + tests_run +fi + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower_scale.sh new file mode 100644 index 000000000..4444bbace --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower_scale.sh @@ -0,0 +1,25 @@ +# SPDX-License-Identifier: GPL-2.0 +source ../tc_flower_scale.sh + +tc_flower_get_target() +{ + local should_fail=$1; shift + local max_cnts + + # The driver associates a counter with each tc filter, which means the + # number of supported filters is bounded by the number of available + # counters. + max_cnts=$(devlink_resource_size_get counters flow) + + # Remove already allocated counters. + ((max_cnts -= $(devlink_resource_occ_get counters flow))) + + # Each rule uses two counters, for packets and bytes. + ((max_cnts /= 2)) + + if ((! should_fail)); then + echo $max_cnts + else + echo $((max_cnts + 1)) + fi +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_police_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_police_scale.sh new file mode 100644 index 000000000..e79ac0dad --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_police_scale.sh @@ -0,0 +1,16 @@ +# SPDX-License-Identifier: GPL-2.0 +source ../tc_police_scale.sh + +tc_police_get_target() +{ + local should_fail=$1; shift + local target + + target=$(devlink_resource_size_get global_policers single_rate_policers) + + if ((! should_fail)); then + echo $target + else + echo $((target + 1)) + fi +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/vxlan_flooding_ipv6.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/vxlan_flooding_ipv6.sh new file mode 100755 index 000000000..fd23c80eb --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/vxlan_flooding_ipv6.sh @@ -0,0 +1,339 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test VxLAN flooding. The device stores flood records in a singly linked list +# where each record stores up to four IPv6 addresses of remote VTEPs. The test +# verifies that packets are correctly flooded in various cases such as deletion +# of a record in the middle of the list. +# +# +-----------------------+ +# | H1 (vrf) | +# | + $h1 | +# | | 2001:db8:1::1/64 | +# +----|------------------+ +# | +# +----|----------------------------------------------------------------------+ +# | SW | | +# | +--|--------------------------------------------------------------------+ | +# | | + $swp1 BR0 (802.1d) | | +# | | | | +# | | + vxlan0 (vxlan) | | +# | | local 2001:db8:2::1 | | +# | | remote 2001:db8:2::{2..17} | | +# | | id 10 dstport 4789 | | +# | +-----------------------------------------------------------------------+ | +# | | +# | 2001:db8:2::0/64 via 2001:db8:3::2 | +# | | +# | + $rp1 | +# | | 2001:db8:3::1/64 | +# +----|----------------------------------------------------------------------+ +# | +# +----|--------------------------------------------------------+ +# | | R2 (vrf) | +# | + $rp2 | +# | 2001:db8:3::2/64 | +# | | +# +-------------------------------------------------------------+ + +lib_dir=$(dirname $0)/../../../../net/forwarding + +ALL_TESTS="flooding_test" +NUM_NETIFS=4 +source $lib_dir/tc_common.sh +source $lib_dir/lib.sh + +h1_create() +{ + simple_if_init $h1 2001:db8:1::1/64 +} + +h1_destroy() +{ + simple_if_fini $h1 2001:db8:1::1/64 +} + +switch_create() +{ + # Make sure the bridge uses the MAC address of the local port and + # not that of the VxLAN's device + ip link add dev br0 type bridge mcast_snooping 0 + ip link set dev br0 address $(mac_get $swp1) + + ip link add name vxlan0 type vxlan id 10 nolearning \ + udp6zerocsumrx udp6zerocsumtx ttl 20 tos inherit \ + local 2001:db8:2::1 dstport 4789 + + ip address add 2001:db8:2::1/128 dev lo + + ip link set dev $swp1 master br0 + ip link set dev vxlan0 master br0 + + ip link set dev br0 up + ip link set dev $swp1 up + ip link set dev vxlan0 up +} + +switch_destroy() +{ + ip link set dev vxlan0 down + ip link set dev $swp1 down + ip link set dev br0 down + + ip link set dev vxlan0 nomaster + ip link set dev $swp1 nomaster + + ip address del 2001:db8:2::1/128 dev lo + + ip link del dev vxlan0 + + ip link del dev br0 +} + +router1_create() +{ + # This router is in the default VRF, where the VxLAN device is + # performing the L3 lookup + ip link set dev $rp1 up + ip address add 2001:db8:3::1/64 dev $rp1 + ip route add 2001:db8:2::0/64 via 2001:db8:3::2 +} + +router1_destroy() +{ + ip route del 2001:db8:2::0/64 via 2001:db8:3::2 + ip address del 2001:db8:3::1/64 dev $rp1 + ip link set dev $rp1 down +} + +router2_create() +{ + # This router is not in the default VRF, so use simple_if_init() + simple_if_init $rp2 2001:db8:3::2/64 +} + +router2_destroy() +{ + simple_if_fini $rp2 2001:db8:3::2/64 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + rp1=${NETIFS[p3]} + rp2=${NETIFS[p4]} + + vrf_prepare + + h1_create + + switch_create + + router1_create + router2_create + + forwarding_enable +} + +cleanup() +{ + pre_cleanup + + forwarding_restore + + router2_destroy + router1_destroy + + switch_destroy + + h1_destroy + + vrf_cleanup +} + +flooding_remotes_add() +{ + local num_remotes=$1 + local lsb + local i + + # Prevent unwanted packets from entering the bridge and interfering + # with the test. + tc qdisc add dev br0 clsact + tc filter add dev br0 egress protocol all pref 1 handle 1 \ + matchall skip_hw action drop + tc qdisc add dev $h1 clsact + tc filter add dev $h1 egress protocol all pref 1 handle 1 \ + flower skip_hw dst_mac de:ad:be:ef:13:37 action pass + tc filter add dev $h1 egress protocol all pref 2 handle 2 \ + matchall skip_hw action drop + + for i in $(eval echo {1..$num_remotes}); do + lsb=$((i + 1)) + + bridge fdb append 00:00:00:00:00:00 dev vxlan0 self \ + dst 2001:db8:2::$lsb + done +} + +flooding_filters_add() +{ + local num_remotes=$1 + local lsb + local i + + tc qdisc add dev $rp2 clsact + + for i in $(eval echo {1..$num_remotes}); do + lsb=$((i + 1)) + + tc filter add dev $rp2 ingress protocol ipv6 pref $i handle $i \ + flower ip_proto udp dst_ip 2001:db8:2::$lsb \ + dst_port 4789 skip_sw action drop + done +} + +flooding_filters_del() +{ + local num_remotes=$1 + local i + + for i in $(eval echo {1..$num_remotes}); do + tc filter del dev $rp2 ingress protocol ipv6 pref $i \ + handle $i flower + done + + tc qdisc del dev $rp2 clsact + + tc filter del dev $h1 egress protocol all pref 2 handle 2 matchall + tc filter del dev $h1 egress protocol all pref 1 handle 1 flower + tc qdisc del dev $h1 clsact + tc filter del dev br0 egress protocol all pref 1 handle 1 matchall + tc qdisc del dev br0 clsact +} + +flooding_check_packets() +{ + local packets=("$@") + local num_remotes=${#packets[@]} + local i + + for i in $(eval echo {1..$num_remotes}); do + tc_check_packets "dev $rp2 ingress" $i ${packets[i - 1]} + check_err $? "remote $i - did not get expected number of packets" + done +} + +flooding_test() +{ + # Use 16 remote VTEPs that will be stored in 4 records. The array + # 'packets' will store how many packets are expected to be received + # by each remote VTEP at each stage of the test + declare -a packets=(1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1) + local num_remotes=16 + + RET=0 + + # Add FDB entries for remote VTEPs and corresponding tc filters on the + # ingress of the nexthop router. These filters will count how many + # packets were flooded to each remote VTEP + flooding_remotes_add $num_remotes + flooding_filters_add $num_remotes + + # Send one packet and make sure it is flooded to all the remote VTEPs + $MZ $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1 + flooding_check_packets "${packets[@]}" + log_test "flood after 1 packet" + + # Delete the third record which corresponds to VTEPs with LSB 10..13 + # and check that packet is flooded correctly when we remove a record + # from the middle of the list + RET=0 + + packets=(2 2 2 2 2 2 2 2 1 1 1 1 2 2 2 2) + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::10 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::11 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::12 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::13 + + $MZ $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1 + flooding_check_packets "${packets[@]}" + log_test "flood after 2 packets" + + # Delete the first record and make sure the packet is flooded correctly + RET=0 + + packets=(2 2 2 2 3 3 3 3 1 1 1 1 3 3 3 3) + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::2 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::3 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::4 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::5 + + $MZ $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1 + flooding_check_packets "${packets[@]}" + log_test "flood after 3 packets" + + # Delete the last record and make sure the packet is flooded correctly + RET=0 + + packets=(2 2 2 2 4 4 4 4 1 1 1 1 3 3 3 3) + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::14 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::15 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::16 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::17 + + $MZ -6 $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1 + flooding_check_packets "${packets[@]}" + log_test "flood after 4 packets" + + # Delete the last record, one entry at a time and make sure single + # entries are correctly removed + RET=0 + + packets=(2 2 2 2 4 5 5 5 1 1 1 1 3 3 3 3) + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::6 + + $MZ -6 $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1 + flooding_check_packets "${packets[@]}" + log_test "flood after 5 packets" + + RET=0 + + packets=(2 2 2 2 4 5 6 6 1 1 1 1 3 3 3 3) + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::7 + + $MZ -6 $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1 + flooding_check_packets "${packets[@]}" + log_test "flood after 6 packets" + + RET=0 + + packets=(2 2 2 2 4 5 6 7 1 1 1 1 3 3 3 3) + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::8 + + $MZ -6 $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1 + flooding_check_packets "${packets[@]}" + log_test "flood after 7 packets" + + RET=0 + + packets=(2 2 2 2 4 5 6 7 1 1 1 1 3 3 3 3) + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::9 + + $MZ -6 $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1 + flooding_check_packets "${packets[@]}" + log_test "flood after 8 packets" + + flooding_filters_del $num_remotes +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/devlink_lib_spectrum.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/devlink_lib_spectrum.sh new file mode 100644 index 000000000..06a80f40d --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/devlink_lib_spectrum.sh @@ -0,0 +1,117 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +source "../../../../net/forwarding/devlink_lib.sh" +source ../mlxsw_lib.sh + +mlxsw_only_on_spectrum 1 || exit 1 + +# Needed for returning to default +declare -A KVD_DEFAULTS + +KVD_CHILDREN="linear hash_single hash_double" +KVDL_CHILDREN="singles chunks large_chunks" + +devlink_sp_resource_minimize() +{ + local size + local i + + for i in $KVD_CHILDREN; do + size=$(devlink_resource_get kvd "$i" | jq '.["size_min"]') + devlink_resource_size_set "$size" kvd "$i" + done + + for i in $KVDL_CHILDREN; do + size=$(devlink_resource_get kvd linear "$i" | \ + jq '.["size_min"]') + devlink_resource_size_set "$size" kvd linear "$i" + done +} + +devlink_sp_size_kvd_to_default() +{ + local need_reload=0 + local i + + for i in $KVD_CHILDREN; do + local size=$(echo "${KVD_DEFAULTS[kvd_$i]}" | jq '.["size"]') + current_size=$(devlink_resource_size_get kvd "$i") + + if [ "$size" -ne "$current_size" ]; then + devlink_resource_size_set "$size" kvd "$i" + need_reload=1 + fi + done + + for i in $KVDL_CHILDREN; do + local size=$(echo "${KVD_DEFAULTS[kvd_linear_$i]}" | \ + jq '.["size"]') + current_size=$(devlink_resource_size_get kvd linear "$i") + + if [ "$size" -ne "$current_size" ]; then + devlink_resource_size_set "$size" kvd linear "$i" + need_reload=1 + fi + done + + if [ "$need_reload" -ne "0" ]; then + devlink_reload + fi +} + +devlink_sp_read_kvd_defaults() +{ + local key + local i + + KVD_DEFAULTS[kvd]=$(devlink_resource_get "kvd") + for i in $KVD_CHILDREN; do + key=kvd_$i + KVD_DEFAULTS[$key]=$(devlink_resource_get kvd "$i") + done + + for i in $KVDL_CHILDREN; do + key=kvd_linear_$i + KVD_DEFAULTS[$key]=$(devlink_resource_get kvd linear "$i") + done +} + +KVD_PROFILES="default scale ipv4_max" + +devlink_sp_resource_kvd_profile_set() +{ + local profile=$1 + + case "$profile" in + scale) + devlink_resource_size_set 64000 kvd linear + devlink_resource_size_set 15616 kvd linear singles + devlink_resource_size_set 32000 kvd linear chunks + devlink_resource_size_set 16384 kvd linear large_chunks + devlink_resource_size_set 128000 kvd hash_single + devlink_resource_size_set 48000 kvd hash_double + devlink_reload + ;; + ipv4_max) + devlink_resource_size_set 64000 kvd linear + devlink_resource_size_set 15616 kvd linear singles + devlink_resource_size_set 32000 kvd linear chunks + devlink_resource_size_set 16384 kvd linear large_chunks + devlink_resource_size_set 144000 kvd hash_single + devlink_resource_size_set 32768 kvd hash_double + devlink_reload + ;; + default) + devlink_resource_size_set 98304 kvd linear + devlink_resource_size_set 16384 kvd linear singles + devlink_resource_size_set 49152 kvd linear chunks + devlink_resource_size_set 32768 kvd linear large_chunks + devlink_resource_size_set 87040 kvd hash_single + devlink_resource_size_set 60416 kvd hash_double + devlink_reload + ;; + *) + check_err 1 "Unknown profile $profile" + esac +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/devlink_resources.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/devlink_resources.sh new file mode 100755 index 000000000..6f2683cbc --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/devlink_resources.sh @@ -0,0 +1,120 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +lib_dir=$(dirname $0)/../../../../net/forwarding + +NUM_NETIFS=1 +source $lib_dir/lib.sh +source devlink_lib_spectrum.sh + +setup_prepare() +{ + devlink_sp_read_kvd_defaults +} + +cleanup() +{ + pre_cleanup + devlink_sp_size_kvd_to_default +} + +trap cleanup EXIT + +setup_prepare + +profiles_test() +{ + local i + + log_info "Running profile tests" + + for i in $KVD_PROFILES; do + RET=0 + devlink_sp_resource_kvd_profile_set $i + log_test "'$i' profile" + done + + # Default is explicitly tested at end to ensure it's actually applied + RET=0 + devlink_sp_resource_kvd_profile_set "default" + log_test "'default' profile" +} + +resources_min_test() +{ + local size + local i + local j + + log_info "Running KVD-minimum tests" + + for i in $KVD_CHILDREN; do + RET=0 + size=$(devlink_resource_get kvd "$i" | jq '.["size_min"]') + devlink_resource_size_set "$size" kvd "$i" + + # In case of linear, need to minimize sub-resources as well + if [[ "$i" == "linear" ]]; then + for j in $KVDL_CHILDREN; do + devlink_resource_size_set 0 kvd linear "$j" + done + fi + + devlink_reload + devlink_sp_size_kvd_to_default + log_test "'$i' minimize [$size]" + done +} + +resources_max_test() +{ + local min_size + local size + local i + local j + + log_info "Running KVD-maximum tests" + for i in $KVD_CHILDREN; do + RET=0 + devlink_sp_resource_minimize + + # Calculate the maximum possible size for the given partition + size=$(devlink_resource_size_get kvd) + for j in $KVD_CHILDREN; do + if [ "$i" != "$j" ]; then + min_size=$(devlink_resource_get kvd "$j" | \ + jq '.["size_min"]') + size=$((size - min_size)) + fi + done + + # Test almost maximum size + devlink_resource_size_set "$((size - 128))" kvd "$i" + devlink_reload + log_test "'$i' almost maximize [$((size - 128))]" + + # Test above maximum size + devlink resource set "$DEVLINK_DEV" \ + path "kvd/$i" size $((size + 128)) &> /dev/null + check_fail $? "Set kvd/$i to size $((size + 128)) should fail" + log_test "'$i' Overflow rejection [$((size + 128))]" + + # Test maximum size + if [ "$i" == "hash_single" ] || [ "$i" == "hash_double" ]; then + echo "SKIP: Observed problem with exact max $i" + continue + fi + + devlink_resource_size_set "$size" kvd "$i" + devlink_reload + log_test "'$i' maximize [$size]" + + devlink_sp_size_kvd_to_default + done +} + +profiles_test +resources_min_test +resources_max_test + +exit "$RET" diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/mirror_gre_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/mirror_gre_scale.sh new file mode 100644 index 000000000..f7c168dec --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/mirror_gre_scale.sh @@ -0,0 +1,16 @@ +# SPDX-License-Identifier: GPL-2.0 +source ../mirror_gre_scale.sh + +mirror_gre_get_target() +{ + local should_fail=$1; shift + local target + + target=$(devlink_resource_size_get span_agents) + + if ((! should_fail)); then + echo $target + else + echo $((target + 1)) + fi +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/port_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/port_scale.sh new file mode 100644 index 000000000..0b71dfbbb --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/port_scale.sh @@ -0,0 +1,16 @@ +# SPDX-License-Identifier: GPL-2.0 +source ../port_scale.sh + +port_get_target() +{ + local should_fail=$1 + local target + + target=$(devlink_resource_size_get physical_ports) + + if ((! should_fail)); then + echo $target + else + echo $((target + 1)) + fi +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/q_in_vni_veto.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/q_in_vni_veto.sh new file mode 100755 index 000000000..f0443b1b0 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/q_in_vni_veto.sh @@ -0,0 +1,66 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +lib_dir=$(dirname $0)/../../../../net/forwarding + +VXPORT=4789 + +ALL_TESTS=" + create_vxlan_on_top_of_8021ad_bridge +" +NUM_NETIFS=2 +source $lib_dir/lib.sh + +setup_prepare() +{ + swp1=${NETIFS[p1]} + swp2=${NETIFS[p2]} + + ip link set dev $swp1 up + ip link set dev $swp2 up +} + +cleanup() +{ + pre_cleanup + + ip link set dev $swp2 down + ip link set dev $swp1 down +} + +create_vxlan_on_top_of_8021ad_bridge() +{ + RET=0 + + ip link add dev br0 type bridge vlan_filtering 1 vlan_protocol 802.1ad \ + vlan_default_pvid 0 mcast_snooping 0 + ip link set dev br0 up + + ip link add name vx100 type vxlan id 1000 local 192.0.2.17 dstport \ + "$VXPORT" nolearning noudpcsum tos inherit ttl 100 + ip link set dev vx100 up + + ip link set dev $swp1 master br0 + ip link set dev vx100 master br0 + + bridge vlan add vid 100 dev vx100 pvid untagged 2>/dev/null + check_fail $? "802.1ad bridge with VxLAN in Spectrum-1 not rejected" + + bridge vlan add vid 100 dev vx100 pvid untagged 2>&1 >/dev/null \ + | grep -q mlxsw_spectrum + check_err $? "802.1ad bridge with VxLAN in Spectrum-1 rejected without extack" + + log_test "create VxLAN on top of 802.1ad bridge" + + ip link del dev vx100 + ip link del dev br0 +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh new file mode 100755 index 000000000..95d9f710a --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh @@ -0,0 +1,84 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +lib_dir=$(dirname $0)/../../../../net/forwarding + +NUM_NETIFS=6 +source $lib_dir/lib.sh +source $lib_dir/tc_common.sh +source devlink_lib_spectrum.sh + +current_test="" + +cleanup() +{ + pre_cleanup + if [ ! -z $current_test ]; then + ${current_test}_cleanup + fi + devlink_sp_size_kvd_to_default +} + +devlink_sp_read_kvd_defaults +trap cleanup EXIT + +ALL_TESTS=" + router + tc_flower + mirror_gre + tc_police + port + rif_mac_profile + rif_counter +" + +for current_test in ${TESTS:-$ALL_TESTS}; do + RET_FIN=0 + source ${current_test}_scale.sh + + num_netifs_var=${current_test^^}_NUM_NETIFS + num_netifs=${!num_netifs_var:-$NUM_NETIFS} + + for profile in $KVD_PROFILES; do + RET=0 + devlink_sp_resource_kvd_profile_set $profile + if [[ $RET -gt 0 ]]; then + log_test "'$current_test' [$profile] setting" + continue + fi + + for should_fail in 0 1; do + RET=0 + target=$(${current_test}_get_target "$should_fail") + if ((target == 0)); then + log_test_skip "'$current_test' [$profile] should_fail=$should_fail test" + continue + fi + ${current_test}_setup_prepare + setup_wait $num_netifs + # Update target in case occupancy of a certain resource + # changed following the test setup. + target=$(${current_test}_get_target "$should_fail") + ${current_test}_test "$target" "$should_fail" + if [[ "$should_fail" -eq 0 ]]; then + log_test "'$current_test' [$profile] $target" + + if ((!RET)); then + tt=${current_test}_traffic_test + if [[ $(type -t $tt) == "function" ]] + then + $tt "$target" + log_test "'$current_test' [$profile] $target traffic test" + fi + fi + else + log_test "'$current_test' [$profile] overflow $target" + fi + ${current_test}_cleanup $target + RET_FIN=$(( RET_FIN || RET )) + done + done +done +current_test="" + +exit "$RET_FIN" diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/rif_counter_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/rif_counter_scale.sh new file mode 100644 index 000000000..d44536276 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/rif_counter_scale.sh @@ -0,0 +1,34 @@ +# SPDX-License-Identifier: GPL-2.0 +source ../rif_counter_scale.sh + +rif_counter_get_target() +{ + local should_fail=$1; shift + local max_cnts + local max_rifs + local target + + max_rifs=$(devlink_resource_size_get rifs) + max_cnts=$(devlink_resource_size_get counters rif) + + # Remove already allocated RIFs. + ((max_rifs -= $(devlink_resource_occ_get rifs))) + + # 10 KVD slots per counter, ingress+egress counters per RIF + ((max_cnts /= 20)) + + # Pointless to run the overflow test if we don't have enough RIFs to + # host all the counters. + if ((max_cnts > max_rifs && should_fail)); then + echo 0 + return + fi + + target=$((max_rifs < max_cnts ? max_rifs : max_cnts)) + + if ((! should_fail)); then + echo $target + else + echo $((target + 1)) + fi +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/rif_mac_profile_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/rif_mac_profile_scale.sh new file mode 100644 index 000000000..303d7cbe3 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/rif_mac_profile_scale.sh @@ -0,0 +1,16 @@ +# SPDX-License-Identifier: GPL-2.0 +source ../rif_mac_profile_scale.sh + +rif_mac_profile_get_target() +{ + local should_fail=$1 + local target + + target=$(devlink_resource_size_get rif_mac_profiles) + + if ((! should_fail)); then + echo $target + else + echo $((target + 1)) + fi +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/router_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/router_scale.sh new file mode 100644 index 000000000..21c4697d5 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/router_scale.sh @@ -0,0 +1,18 @@ +# SPDX-License-Identifier: GPL-2.0 +source ../router_scale.sh + +router_get_target() +{ + local should_fail=$1 + local target + + target=$(devlink_resource_size_get kvd hash_single) + + if [[ $should_fail -eq 0 ]]; then + target=$((target * 85 / 100)) + else + target=$((target + 1)) + fi + + echo $target +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/tc_flower_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/tc_flower_scale.sh new file mode 100644 index 000000000..f9bfd8937 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/tc_flower_scale.sh @@ -0,0 +1,19 @@ +# SPDX-License-Identifier: GPL-2.0 +source ../tc_flower_scale.sh + +tc_flower_get_target() +{ + local should_fail=$1; shift + + # 6144 (6x1024) is the theoretical maximum. + # One bank of 512 rules is taken by the 18-byte MC router rule. + # One rule is the ACL catch-all. + # 6144 - 512 - 1 = 5631 + local target=5631 + + if ((! should_fail)); then + echo $target + else + echo $((target + 1)) + fi +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/tc_police_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/tc_police_scale.sh new file mode 100644 index 000000000..e79ac0dad --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/tc_police_scale.sh @@ -0,0 +1,16 @@ +# SPDX-License-Identifier: GPL-2.0 +source ../tc_police_scale.sh + +tc_police_get_target() +{ + local should_fail=$1; shift + local target + + target=$(devlink_resource_size_get global_policers single_rate_policers) + + if ((! should_fail)); then + echo $target + else + echo $((target + 1)) + fi +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/vxlan_flooding_ipv6.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/vxlan_flooding_ipv6.sh new file mode 100755 index 000000000..d8fd875ad --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/vxlan_flooding_ipv6.sh @@ -0,0 +1,334 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test VxLAN flooding. The device stores flood records in a singly linked list +# where each record stores up to five IPv6 addresses of remote VTEPs. The test +# verifies that packets are correctly flooded in various cases such as deletion +# of a record in the middle of the list. +# +# +-----------------------+ +# | H1 (vrf) | +# | + $h1 | +# | | 2001:db8:1::1/64 | +# +----|------------------+ +# | +# +----|----------------------------------------------------------------------+ +# | SW | | +# | +--|--------------------------------------------------------------------+ | +# | | + $swp1 BR0 (802.1d) | | +# | | | | +# | | + vxlan0 (vxlan) | | +# | | local 2001:db8:2::1 | | +# | | remote 2001:db8:2::{2..21} | | +# | | id 10 dstport 4789 | | +# | +-----------------------------------------------------------------------+ | +# | | +# | 2001:db8:2::0/64 via 2001:db8:3::2 | +# | | +# | + $rp1 | +# | | 2001:db8:3::1/64 | +# +----|----------------------------------------------------------------------+ +# | +# +----|--------------------------------------------------------+ +# | | R2 (vrf) | +# | + $rp2 | +# | 2001:db8:3::2/64 | +# | | +# +-------------------------------------------------------------+ + +lib_dir=$(dirname $0)/../../../../net/forwarding + +ALL_TESTS="flooding_test" +NUM_NETIFS=4 +source $lib_dir/tc_common.sh +source $lib_dir/lib.sh + +h1_create() +{ + simple_if_init $h1 2001:db8:1::1/64 +} + +h1_destroy() +{ + simple_if_fini $h1 2001:db8:1::1/64 +} + +switch_create() +{ + # Make sure the bridge uses the MAC address of the local port and + # not that of the VxLAN's device + ip link add dev br0 type bridge mcast_snooping 0 + ip link set dev br0 address $(mac_get $swp1) + + ip link add name vxlan0 type vxlan id 10 nolearning \ + udp6zerocsumrx udp6zerocsumtx ttl 20 tos inherit \ + local 2001:db8:2::1 dstport 4789 + + ip address add 2001:db8:2::1/128 dev lo + + ip link set dev $swp1 master br0 + ip link set dev vxlan0 master br0 + + ip link set dev br0 up + ip link set dev $swp1 up + ip link set dev vxlan0 up +} + +switch_destroy() +{ + ip link set dev vxlan0 down + ip link set dev $swp1 down + ip link set dev br0 down + + ip link set dev vxlan0 nomaster + ip link set dev $swp1 nomaster + + ip address del 2001:db8:2::1/128 dev lo + + ip link del dev vxlan0 + + ip link del dev br0 +} + +router1_create() +{ + # This router is in the default VRF, where the VxLAN device is + # performing the L3 lookup + ip link set dev $rp1 up + ip address add 2001:db8:3::1/64 dev $rp1 + ip route add 2001:db8:2::0/64 via 2001:db8:3::2 +} + +router1_destroy() +{ + ip route del 2001:db8:2::0/64 via 2001:db8:3::2 + ip address del 2001:db8:3::1/64 dev $rp1 + ip link set dev $rp1 down +} + +router2_create() +{ + # This router is not in the default VRF, so use simple_if_init() + simple_if_init $rp2 2001:db8:3::2/64 +} + +router2_destroy() +{ + simple_if_fini $rp2 2001:db8:3::2/64 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + rp1=${NETIFS[p3]} + rp2=${NETIFS[p4]} + + vrf_prepare + + h1_create + + switch_create + + router1_create + router2_create + + forwarding_enable +} + +cleanup() +{ + pre_cleanup + + forwarding_restore + + router2_destroy + router1_destroy + + switch_destroy + + h1_destroy + + vrf_cleanup +} + +flooding_remotes_add() +{ + local num_remotes=$1 + local lsb + local i + + for i in $(eval echo {1..$num_remotes}); do + lsb=$((i + 1)) + + bridge fdb append 00:00:00:00:00:00 dev vxlan0 self \ + dst 2001:db8:2::$lsb + done +} + +flooding_filters_add() +{ + local num_remotes=$1 + local lsb + local i + + tc qdisc add dev $rp2 clsact + + for i in $(eval echo {1..$num_remotes}); do + lsb=$((i + 1)) + + tc filter add dev $rp2 ingress protocol ipv6 pref $i handle $i \ + flower ip_proto udp dst_ip 2001:db8:2::$lsb \ + dst_port 4789 skip_sw action drop + done +} + +flooding_filters_del() +{ + local num_remotes=$1 + local i + + for i in $(eval echo {1..$num_remotes}); do + tc filter del dev $rp2 ingress protocol ipv6 pref $i \ + handle $i flower + done + + tc qdisc del dev $rp2 clsact +} + +flooding_check_packets() +{ + local packets=("$@") + local num_remotes=${#packets[@]} + local i + + for i in $(eval echo {1..$num_remotes}); do + tc_check_packets "dev $rp2 ingress" $i ${packets[i - 1]} + check_err $? "remote $i - did not get expected number of packets" + done +} + +flooding_test() +{ + # Use 20 remote VTEPs that will be stored in 4 records. The array + # 'packets' will store how many packets are expected to be received + # by each remote VTEP at each stage of the test + declare -a packets=(1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1) + local num_remotes=20 + + RET=0 + + # Add FDB entries for remote VTEPs and corresponding tc filters on the + # ingress of the nexthop router. These filters will count how many + # packets were flooded to each remote VTEP + flooding_remotes_add $num_remotes + flooding_filters_add $num_remotes + + # Send one packet and make sure it is flooded to all the remote VTEPs + $MZ -6 $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1 + flooding_check_packets "${packets[@]}" + log_test "flood after 1 packet" + + # Delete the third record which corresponds to VTEPs with LSB 12..16 + # and check that packet is flooded correctly when we remove a record + # from the middle of the list + RET=0 + + packets=(2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 2 2 2 2 2) + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::12 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::13 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::14 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::15 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::16 + + $MZ -6 $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1 + flooding_check_packets "${packets[@]}" + log_test "flood after 2 packets" + + # Delete the first record and make sure the packet is flooded correctly + RET=0 + + packets=(2 2 2 2 2 3 3 3 3 3 1 1 1 1 1 3 3 3 3 3) + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::2 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::3 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::4 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::5 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::6 + + $MZ -6 $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1 + flooding_check_packets "${packets[@]}" + log_test "flood after 3 packets" + + # Delete the last record and make sure the packet is flooded correctly + RET=0 + + packets=(2 2 2 2 2 4 4 4 4 4 1 1 1 1 1 3 3 3 3 3) + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::17 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::18 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::19 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::20 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::21 + + $MZ -6 $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1 + flooding_check_packets "${packets[@]}" + log_test "flood after 4 packets" + + # Delete the last record, one entry at a time and make sure single + # entries are correctly removed + RET=0 + + packets=(2 2 2 2 2 4 5 5 5 5 1 1 1 1 1 3 3 3 3 3) + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::7 + + $MZ -6 $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1 + flooding_check_packets "${packets[@]}" + log_test "flood after 5 packets" + + RET=0 + + packets=(2 2 2 2 2 4 5 6 6 6 1 1 1 1 1 3 3 3 3 3) + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::8 + + $MZ -6 $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1 + flooding_check_packets "${packets[@]}" + log_test "flood after 6 packets" + + RET=0 + + packets=(2 2 2 2 2 4 5 6 7 7 1 1 1 1 1 3 3 3 3 3) + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::9 + + $MZ -6 $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1 + flooding_check_packets "${packets[@]}" + log_test "flood after 7 packets" + + RET=0 + + packets=(2 2 2 2 2 4 5 6 7 8 1 1 1 1 1 3 3 3 3 3) + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::10 + + $MZ -6 $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1 + flooding_check_packets "${packets[@]}" + log_test "flood after 8 packets" + + RET=0 + + packets=(2 2 2 2 2 4 5 6 7 8 1 1 1 1 1 3 3 3 3 3) + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::11 + + $MZ -6 $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1 + flooding_check_packets "${packets[@]}" + log_test "flood after 9 packets" + + flooding_filters_del $num_remotes +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/tc_action_hw_stats.sh b/tools/testing/selftests/drivers/net/mlxsw/tc_action_hw_stats.sh new file mode 100755 index 000000000..20ed98fe5 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/tc_action_hw_stats.sh @@ -0,0 +1,130 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + default_hw_stats_test + immediate_hw_stats_test + delayed_hw_stats_test + disabled_hw_stats_test +" +NUM_NETIFS=2 + +source $lib_dir/tc_common.sh +source $lib_dir/lib.sh +source $lib_dir/devlink_lib.sh + +h1_create() +{ + simple_if_init $h1 192.0.2.1/24 +} + +h1_destroy() +{ + simple_if_fini $h1 192.0.2.1/24 +} + +switch_create() +{ + simple_if_init $swp1 192.0.2.2/24 + tc qdisc add dev $swp1 clsact +} + +switch_destroy() +{ + tc qdisc del dev $swp1 clsact + simple_if_fini $swp1 192.0.2.2/24 +} + +hw_stats_test() +{ + RET=0 + + local name=$1 + local action_hw_stats=$2 + local occ_delta=$3 + local expected_packet_count=$4 + + local orig_occ=$(devlink_resource_get "counters" "flow" | jq '.["occ"]') + + tc filter add dev $swp1 ingress protocol ip pref 1 handle 101 flower \ + skip_sw dst_ip 192.0.2.2 action drop $action_hw_stats + check_err $? "Failed to add rule with $name hw_stats" + + local new_occ=$(devlink_resource_get "counters" "flow" | jq '.["occ"]') + local expected_occ=$((orig_occ + occ_delta)) + [ "$new_occ" == "$expected_occ" ] + check_err $? "Expected occupancy of $expected_occ, got $new_occ" + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $swp1mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $swp1 ingress" 101 $expected_packet_count + check_err $? "Did not match incoming packet" + + tc filter del dev $swp1 ingress protocol ip pref 1 handle 101 flower + + log_test "$name hw_stats" +} + +default_hw_stats_test() +{ + hw_stats_test "default" "" 2 1 +} + +immediate_hw_stats_test() +{ + hw_stats_test "immediate" "hw_stats immediate" 2 1 +} + +delayed_hw_stats_test() +{ + RET=0 + + tc filter add dev $swp1 ingress protocol ip pref 1 handle 101 flower \ + skip_sw dst_ip 192.0.2.2 action drop hw_stats delayed + check_fail $? "Unexpected success in adding rule with delayed hw_stats" + + log_test "delayed hw_stats" +} + +disabled_hw_stats_test() +{ + hw_stats_test "disabled" "hw_stats disabled" 0 0 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + h1mac=$(mac_get $h1) + swp1mac=$(mac_get $swp1) + + vrf_prepare + + h1_create + switch_create +} + +cleanup() +{ + pre_cleanup + + switch_destroy + h1_destroy + + vrf_cleanup +} + +check_tc_action_hw_stats_support + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/tc_flower_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/tc_flower_scale.sh new file mode 100644 index 000000000..d3d9e60d6 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/tc_flower_scale.sh @@ -0,0 +1,140 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Test for resource limit of offloaded flower rules. The test adds a given +# number of flower matches for different IPv6 addresses, then check the offload +# indication for all of the tc flower rules. This file contains functions to set +# up a testing topology and run the test, and is meant to be sourced from a test +# script that calls the testing routine with a given number of rules. + +TC_FLOWER_NUM_NETIFS=2 + +tc_flower_h1_create() +{ + simple_if_init $h1 + tc qdisc add dev $h1 clsact +} + +tc_flower_h1_destroy() +{ + tc qdisc del dev $h1 clsact + simple_if_fini $h1 +} + +tc_flower_h2_create() +{ + simple_if_init $h2 + tc qdisc add dev $h2 clsact +} + +tc_flower_h2_destroy() +{ + tc qdisc del dev $h2 clsact + simple_if_fini $h2 +} + +tc_flower_setup_prepare() +{ + h1=${NETIFS[p1]} + h2=${NETIFS[p2]} + + vrf_prepare + + tc_flower_h1_create + tc_flower_h2_create +} + +tc_flower_cleanup() +{ + pre_cleanup + + tc_flower_h2_destroy + tc_flower_h1_destroy + + vrf_cleanup + + if [[ -v TC_FLOWER_BATCH_FILE ]]; then + rm -f $TC_FLOWER_BATCH_FILE + fi +} + +tc_flower_addr() +{ + local num=$1; shift + + printf "2001:db8:1::%x" $num +} + +tc_flower_rules_create() +{ + local count=$1; shift + local should_fail=$1; shift + + TC_FLOWER_BATCH_FILE="$(mktemp)" + + for ((i = 0; i < count; ++i)); do + cat >> $TC_FLOWER_BATCH_FILE <<-EOF + filter add dev $h2 ingress \ + prot ipv6 \ + pref 1000 \ + handle 42$i \ + flower $tcflags dst_ip $(tc_flower_addr $i) \ + action drop + EOF + done + + tc -b $TC_FLOWER_BATCH_FILE + check_err_fail $should_fail $? "Rule insertion" +} + +__tc_flower_test() +{ + local count=$1; shift + local should_fail=$1; shift + local last=$((count - 1)) + + tc_flower_rules_create $count $should_fail + + offload_count=$(tc -j -s filter show dev $h2 ingress | + jq -r '[ .[] | select(.kind == "flower") | + .options | .in_hw ]' | jq .[] | wc -l) + [[ $((offload_count - 1)) -eq $count ]] + check_err_fail $should_fail $? "Attempt to offload $count rules (actual result $((offload_count - 1)))" +} + +tc_flower_test() +{ + local count=$1; shift + local should_fail=$1; shift + + # We use lower 16 bits of IPv6 address for match. Also there are only 16 + # bits of rule priority space. + if ((count > 65536)); then + check_err 1 "Invalid count of $count. At most 65536 rules supported" + return + fi + + if ! tc_offload_check $TC_FLOWER_NUM_NETIFS; then + check_err 1 "Could not test offloaded functionality" + return + fi + + tcflags="skip_sw" + __tc_flower_test $count $should_fail +} + +tc_flower_traffic_test() +{ + local count=$1; shift + local i; + + for ((i = count - 1; i > 0; i /= 2)); do + $MZ -6 $h1 -c 1 -d 20msec -p 100 -a own -b $(mac_get $h2) \ + -A $(tc_flower_addr 0) -B $(tc_flower_addr $i) \ + -q -t udp sp=54321,dp=12345 + done + for ((i = count - 1; i > 0; i /= 2)); do + tc_check_packets "dev $h2 ingress" 42$i 1 + check_err $? "Traffic not seen at rule #$i" + done +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/tc_police_occ.sh b/tools/testing/selftests/drivers/net/mlxsw/tc_police_occ.sh new file mode 100755 index 000000000..448b75c15 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/tc_police_occ.sh @@ -0,0 +1,108 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test that policers shared by different tc filters are correctly reference +# counted by observing policers' occupancy via devlink-resource. + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + tc_police_occ_test +" +NUM_NETIFS=2 +source $lib_dir/lib.sh +source $lib_dir/devlink_lib.sh + +h1_create() +{ + simple_if_init $h1 +} + +h1_destroy() +{ + simple_if_fini $h1 +} + +switch_create() +{ + simple_if_init $swp1 + tc qdisc add dev $swp1 clsact +} + +switch_destroy() +{ + tc qdisc del dev $swp1 clsact + simple_if_fini $swp1 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + vrf_prepare + + h1_create + switch_create +} + +cleanup() +{ + pre_cleanup + + switch_destroy + h1_destroy + + vrf_cleanup +} + +tc_police_occ_get() +{ + devlink_resource_occ_get global_policers single_rate_policers +} + +tc_police_occ_test() +{ + RET=0 + + local occ=$(tc_police_occ_get) + + tc filter add dev $swp1 ingress pref 1 handle 101 proto ip \ + flower skip_sw \ + action police rate 100mbit burst 100k conform-exceed drop/ok + (( occ + 1 == $(tc_police_occ_get) )) + check_err $? "Got occupancy $(tc_police_occ_get), expected $((occ + 1))" + + tc filter del dev $swp1 ingress pref 1 handle 101 flower + (( occ == $(tc_police_occ_get) )) + check_err $? "Got occupancy $(tc_police_occ_get), expected $occ" + + tc filter add dev $swp1 ingress pref 1 handle 101 proto ip \ + flower skip_sw \ + action police rate 100mbit burst 100k conform-exceed drop/ok \ + index 10 + tc filter add dev $swp1 ingress pref 2 handle 102 proto ip \ + flower skip_sw action police index 10 + + (( occ + 1 == $(tc_police_occ_get) )) + check_err $? "Got occupancy $(tc_police_occ_get), expected $((occ + 1))" + + tc filter del dev $swp1 ingress pref 2 handle 102 flower + (( occ + 1 == $(tc_police_occ_get) )) + check_err $? "Got occupancy $(tc_police_occ_get), expected $((occ + 1))" + + tc filter del dev $swp1 ingress pref 1 handle 101 flower + (( occ == $(tc_police_occ_get) )) + check_err $? "Got occupancy $(tc_police_occ_get), expected $occ" + + log_test "tc police occupancy" +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/tc_police_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/tc_police_scale.sh new file mode 100644 index 000000000..86e787895 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/tc_police_scale.sh @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: GPL-2.0 + +TC_POLICE_NUM_NETIFS=2 + +tc_police_h1_create() +{ + simple_if_init $h1 +} + +tc_police_h1_destroy() +{ + simple_if_fini $h1 +} + +tc_police_switch_create() +{ + simple_if_init $swp1 + tc qdisc add dev $swp1 clsact +} + +tc_police_switch_destroy() +{ + tc qdisc del dev $swp1 clsact + simple_if_fini $swp1 +} + +tc_police_addr() +{ + local num=$1; shift + + printf "2001:db8:1::%x" $num +} + +tc_police_rules_create() +{ + local count=$1; shift + local should_fail=$1; shift + + TC_POLICE_BATCH_FILE="$(mktemp)" + + for ((i = 0; i < count; ++i)); do + cat >> $TC_POLICE_BATCH_FILE <<-EOF + filter add dev $swp1 ingress \ + prot ipv6 \ + pref 1000 \ + flower skip_sw dst_ip $(tc_police_addr $i) \ + action police rate 10mbit burst 100k \ + conform-exceed drop/ok + EOF + done + + tc -b $TC_POLICE_BATCH_FILE + check_err_fail $should_fail $? "Rule insertion" +} + +__tc_police_test() +{ + local count=$1; shift + local should_fail=$1; shift + + tc_police_rules_create $count $should_fail + + offload_count=$(tc -j filter show dev $swp1 ingress | + jq "[.[] | select(.options.in_hw == true)] | length") + ((offload_count == count)) + check_err_fail $should_fail $? "tc police offload count" +} + +tc_police_test() +{ + local count=$1; shift + local should_fail=$1; shift + + if ! tc_offload_check $TC_POLICE_NUM_NETIFS; then + check_err 1 "Could not test offloaded functionality" + return + fi + + __tc_police_test $count $should_fail +} + +tc_police_setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + vrf_prepare + + tc_police_h1_create + tc_police_switch_create +} + +tc_police_cleanup() +{ + pre_cleanup + + tc_police_switch_destroy + tc_police_h1_destroy + + vrf_cleanup +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/tc_restrictions.sh b/tools/testing/selftests/drivers/net/mlxsw/tc_restrictions.sh new file mode 100755 index 000000000..0441a18f0 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/tc_restrictions.sh @@ -0,0 +1,414 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + shared_block_drop_test + egress_redirect_test + multi_mirror_test + matchall_sample_egress_test + matchall_mirror_behind_flower_ingress_test + matchall_sample_behind_flower_ingress_test + matchall_mirror_behind_flower_egress_test + matchall_proto_match_test + police_limits_test + multi_police_test +" +NUM_NETIFS=2 + +source $lib_dir/tc_common.sh +source $lib_dir/lib.sh +source $lib_dir/devlink_lib.sh +source mlxsw_lib.sh + +switch_create() +{ + simple_if_init $swp1 192.0.2.1/24 + simple_if_init $swp2 192.0.2.2/24 +} + +switch_destroy() +{ + simple_if_fini $swp2 192.0.2.2/24 + simple_if_fini $swp1 192.0.2.1/24 +} + +shared_block_drop_test() +{ + RET=0 + + # It is forbidden in mlxsw driver to have mixed-bound + # shared block with a drop rule. + + tc qdisc add dev $swp1 ingress_block 22 clsact + check_err $? "Failed to create clsact with ingress block" + + tc filter add block 22 protocol ip pref 1 handle 101 flower \ + skip_sw dst_ip 192.0.2.2 action drop + check_err $? "Failed to add drop rule to ingress bound block" + + tc qdisc add dev $swp2 ingress_block 22 clsact + check_err $? "Failed to create another clsact with ingress shared block" + + tc qdisc del dev $swp2 clsact + + tc qdisc add dev $swp2 egress_block 22 clsact + check_fail $? "Incorrect success to create another clsact with egress shared block" + + tc filter del block 22 protocol ip pref 1 handle 101 flower + + tc qdisc add dev $swp2 egress_block 22 clsact + check_err $? "Failed to create another clsact with egress shared block after blocker drop rule removed" + + tc filter add block 22 protocol ip pref 1 handle 101 flower \ + skip_sw dst_ip 192.0.2.2 action drop + check_fail $? "Incorrect success to add drop rule to mixed bound block" + + tc qdisc del dev $swp1 clsact + + tc qdisc add dev $swp1 egress_block 22 clsact + check_err $? "Failed to create another clsact with egress shared block" + + tc filter add block 22 protocol ip pref 1 handle 101 flower \ + skip_sw dst_ip 192.0.2.2 action drop + check_err $? "Failed to add drop rule to egress bound shared block" + + tc filter del block 22 protocol ip pref 1 handle 101 flower + + tc qdisc del dev $swp2 clsact + tc qdisc del dev $swp1 clsact + + log_test "shared block drop" +} + +egress_redirect_test() +{ + RET=0 + + # It is forbidden in mlxsw driver to have mirred redirect on + # egress-bound block. + + tc qdisc add dev $swp1 ingress_block 22 clsact + check_err $? "Failed to create clsact with ingress block" + + tc filter add block 22 protocol ip pref 1 handle 101 flower \ + skip_sw dst_ip 192.0.2.2 \ + action mirred egress redirect dev $swp2 + check_err $? "Failed to add redirect rule to ingress bound block" + + tc qdisc add dev $swp2 ingress_block 22 clsact + check_err $? "Failed to create another clsact with ingress shared block" + + tc qdisc del dev $swp2 clsact + + tc qdisc add dev $swp2 egress_block 22 clsact + check_fail $? "Incorrect success to create another clsact with egress shared block" + + tc filter del block 22 protocol ip pref 1 handle 101 flower + + tc qdisc add dev $swp2 egress_block 22 clsact + check_err $? "Failed to create another clsact with egress shared block after blocker redirect rule removed" + + tc filter add block 22 protocol ip pref 1 handle 101 flower \ + skip_sw dst_ip 192.0.2.2 \ + action mirred egress redirect dev $swp2 + check_fail $? "Incorrect success to add redirect rule to mixed bound block" + + tc qdisc del dev $swp1 clsact + + tc qdisc add dev $swp1 egress_block 22 clsact + check_err $? "Failed to create another clsact with egress shared block" + + tc filter add block 22 protocol ip pref 1 handle 101 flower \ + skip_sw dst_ip 192.0.2.2 \ + action mirred egress redirect dev $swp2 + check_fail $? "Incorrect success to add redirect rule to egress bound shared block" + + tc qdisc del dev $swp2 clsact + + tc filter add block 22 protocol ip pref 1 handle 101 flower \ + skip_sw dst_ip 192.0.2.2 \ + action mirred egress redirect dev $swp2 + check_fail $? "Incorrect success to add redirect rule to egress bound block" + + tc qdisc del dev $swp1 clsact + + log_test "shared block drop" +} + +multi_mirror_test() +{ + RET=0 + + # It is forbidden in mlxsw driver to have multiple mirror + # actions in a single rule. + + tc qdisc add dev $swp1 clsact + + tc filter add dev $swp1 ingress protocol ip pref 1 handle 101 flower \ + skip_sw dst_ip 192.0.2.2 \ + action mirred egress mirror dev $swp2 + check_err $? "Failed to add rule with single mirror action" + + tc filter del dev $swp1 ingress protocol ip pref 1 handle 101 flower + + tc filter add dev $swp1 ingress protocol ip pref 1 handle 101 flower \ + skip_sw dst_ip 192.0.2.2 \ + action mirred egress mirror dev $swp2 \ + action mirred egress mirror dev $swp1 + check_fail $? "Incorrect success to add rule with two mirror actions" + + tc qdisc del dev $swp1 clsact + + log_test "multi mirror" +} + +matchall_sample_egress_test() +{ + RET=0 + + # It is forbidden in mlxsw driver to have matchall with sample action + # bound on egress. Spectrum-1 specific restriction + mlxsw_only_on_spectrum 1 || return + + tc qdisc add dev $swp1 clsact + + tc filter add dev $swp1 ingress protocol all pref 1 handle 101 \ + matchall skip_sw action sample rate 100 group 1 + check_err $? "Failed to add rule with sample action on ingress" + + tc filter del dev $swp1 ingress protocol all pref 1 handle 101 matchall + + tc filter add dev $swp1 egress protocol all pref 1 handle 101 \ + matchall skip_sw action sample rate 100 group 1 + check_fail $? "Incorrect success to add rule with sample action on egress" + + tc qdisc del dev $swp1 clsact + + log_test "matchall sample egress" +} + +matchall_behind_flower_ingress_test() +{ + local action=$1 + local action_args=$2 + + RET=0 + + # On ingress, all matchall-mirror and matchall-sample + # rules have to be in front of the flower rules + + tc qdisc add dev $swp1 clsact + + tc filter add dev $swp1 ingress protocol ip pref 10 handle 101 flower \ + skip_sw dst_ip 192.0.2.2 action drop + + tc filter add dev $swp1 ingress protocol all pref 9 handle 102 \ + matchall skip_sw action $action_args + check_err $? "Failed to add matchall rule in front of a flower rule" + + tc filter del dev $swp1 ingress protocol all pref 9 handle 102 matchall + + tc filter add dev $swp1 ingress protocol all pref 11 handle 102 \ + matchall skip_sw action $action_args + check_fail $? "Incorrect success to add matchall rule behind a flower rule" + + tc filter del dev $swp1 ingress protocol ip pref 10 handle 101 flower + + tc filter add dev $swp1 ingress protocol all pref 9 handle 102 \ + matchall skip_sw action $action_args + + tc filter add dev $swp1 ingress protocol ip pref 10 handle 101 flower \ + skip_sw dst_ip 192.0.2.2 action drop + check_err $? "Failed to add flower rule behind a matchall rule" + + tc filter del dev $swp1 ingress protocol ip pref 10 handle 101 flower + + tc filter add dev $swp1 ingress protocol ip pref 8 handle 101 flower \ + skip_sw dst_ip 192.0.2.2 action drop + check_fail $? "Incorrect success to add flower rule in front of a matchall rule" + + tc qdisc del dev $swp1 clsact + + log_test "matchall $action flower ingress" +} + +matchall_mirror_behind_flower_ingress_test() +{ + matchall_behind_flower_ingress_test "mirror" "mirred egress mirror dev $swp2" +} + +matchall_sample_behind_flower_ingress_test() +{ + matchall_behind_flower_ingress_test "sample" "sample rate 100 group 1" +} + +matchall_behind_flower_egress_test() +{ + local action=$1 + local action_args=$2 + + RET=0 + + # On egress, all matchall-mirror rules have to be behind the flower rules + + tc qdisc add dev $swp1 clsact + + tc filter add dev $swp1 egress protocol ip pref 10 handle 101 flower \ + skip_sw dst_ip 192.0.2.2 action drop + + tc filter add dev $swp1 egress protocol all pref 11 handle 102 \ + matchall skip_sw action $action_args + check_err $? "Failed to add matchall rule in front of a flower rule" + + tc filter del dev $swp1 egress protocol all pref 11 handle 102 matchall + + tc filter add dev $swp1 egress protocol all pref 9 handle 102 \ + matchall skip_sw action $action_args + check_fail $? "Incorrect success to add matchall rule behind a flower rule" + + tc filter del dev $swp1 egress protocol ip pref 10 handle 101 flower + + tc filter add dev $swp1 egress protocol all pref 11 handle 102 \ + matchall skip_sw action $action_args + + tc filter add dev $swp1 egress protocol ip pref 10 handle 101 flower \ + skip_sw dst_ip 192.0.2.2 action drop + check_err $? "Failed to add flower rule behind a matchall rule" + + tc filter del dev $swp1 egress protocol ip pref 10 handle 101 flower + + tc filter add dev $swp1 egress protocol ip pref 12 handle 101 flower \ + skip_sw dst_ip 192.0.2.2 action drop + check_fail $? "Incorrect success to add flower rule in front of a matchall rule" + + tc qdisc del dev $swp1 clsact + + log_test "matchall $action flower egress" +} + +matchall_mirror_behind_flower_egress_test() +{ + matchall_behind_flower_egress_test "mirror" "mirred egress mirror dev $swp2" +} + +matchall_proto_match_test() +{ + RET=0 + + tc qdisc add dev $swp1 clsact + + tc filter add dev $swp1 ingress pref 1 proto ip handle 101 \ + matchall skip_sw \ + action sample group 1 rate 100 + check_fail $? "Incorrect success to add matchall rule with protocol match" + + tc qdisc del dev $swp1 clsact + + log_test "matchall protocol match" +} + +police_limits_test() +{ + RET=0 + + tc qdisc add dev $swp1 clsact + + tc filter add dev $swp1 ingress pref 1 proto ip handle 101 \ + flower skip_sw \ + action police rate 0.5kbit burst 1m conform-exceed drop/ok + check_fail $? "Incorrect success to add police action with too low rate" + + tc filter add dev $swp1 ingress pref 1 proto ip handle 101 \ + flower skip_sw \ + action police rate 2.5tbit burst 1g conform-exceed drop/ok + check_fail $? "Incorrect success to add police action with too high rate" + + tc filter add dev $swp1 ingress pref 1 proto ip handle 101 \ + flower skip_sw \ + action police rate 1.5kbit burst 1m conform-exceed drop/ok + check_err $? "Failed to add police action with low rate" + + tc filter del dev $swp1 ingress protocol ip pref 1 handle 101 flower + + tc filter add dev $swp1 ingress pref 1 proto ip handle 101 \ + flower skip_sw \ + action police rate 1.9tbit burst 1g conform-exceed drop/ok + check_err $? "Failed to add police action with high rate" + + tc filter del dev $swp1 ingress protocol ip pref 1 handle 101 flower + + tc filter add dev $swp1 ingress pref 1 proto ip handle 101 \ + flower skip_sw \ + action police rate 1.5kbit burst 512b conform-exceed drop/ok + check_fail $? "Incorrect success to add police action with too low burst size" + + tc filter add dev $swp1 ingress pref 1 proto ip handle 101 \ + flower skip_sw \ + action police rate 1.5kbit burst 2k conform-exceed drop/ok + check_err $? "Failed to add police action with low burst size" + + tc filter del dev $swp1 ingress protocol ip pref 1 handle 101 flower + + tc qdisc del dev $swp1 clsact + + log_test "police rate and burst limits" +} + +multi_police_test() +{ + RET=0 + + # It is forbidden in mlxsw driver to have multiple police + # actions in a single rule. + + tc qdisc add dev $swp1 clsact + + tc filter add dev $swp1 ingress protocol ip pref 1 handle 101 \ + flower skip_sw \ + action police rate 100mbit burst 100k conform-exceed drop/ok + check_err $? "Failed to add rule with single police action" + + tc filter del dev $swp1 ingress protocol ip pref 1 handle 101 flower + + tc filter add dev $swp1 ingress protocol ip pref 1 handle 101 \ + flower skip_sw \ + action police rate 100mbit burst 100k conform-exceed drop/pipe \ + action police rate 200mbit burst 200k conform-exceed drop/ok + check_fail $? "Incorrect success to add rule with two police actions" + + tc qdisc del dev $swp1 clsact + + log_test "multi police" +} + +setup_prepare() +{ + swp1=${NETIFS[p1]} + swp2=${NETIFS[p2]} + + vrf_prepare + + switch_create +} + +cleanup() +{ + pre_cleanup + + switch_destroy + + vrf_cleanup +} + +check_tc_shblock_support + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/tc_sample.sh b/tools/testing/selftests/drivers/net/mlxsw/tc_sample.sh new file mode 100755 index 000000000..83a0210e7 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/tc_sample.sh @@ -0,0 +1,658 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test that packets are sampled when tc-sample is used and that reported +# metadata is correct. Two sets of hosts (with and without LAG) are used, since +# metadata extraction in mlxsw is a bit different when LAG is involved. +# +# +---------------------------------+ +---------------------------------+ +# | H1 (vrf) | | H3 (vrf) | +# | + $h1 | | + $h3_lag | +# | | 192.0.2.1/28 | | | 192.0.2.17/28 | +# | | | | | | +# | | default via 192.0.2.2 | | | default via 192.0.2.18 | +# +----|----------------------------+ +----|----------------------------+ +# | | +# +----|-----------------------------------------|----------------------------+ +# | | 192.0.2.2/28 | 192.0.2.18/28 | +# | + $rp1 + $rp3_lag | +# | | +# | + $rp2 + $rp4_lag | +# | | 198.51.100.2/28 | 198.51.100.18/28 | +# +----|-----------------------------------------|----------------------------+ +# | | +# +----|----------------------------+ +----|----------------------------+ +# | | default via 198.51.100.2 | | | default via 198.51.100.18 | +# | | | | | | +# | | 198.51.100.1/28 | | | 198.51.100.17/28 | +# | + $h2 | | + $h4_lag | +# | H2 (vrf) | | H4 (vrf) | +# +---------------------------------+ +---------------------------------+ + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + tc_sample_rate_test + tc_sample_max_rate_test + tc_sample_conflict_test + tc_sample_group_conflict_test + tc_sample_md_iif_test + tc_sample_md_lag_iif_test + tc_sample_md_oif_test + tc_sample_md_lag_oif_test + tc_sample_md_out_tc_test + tc_sample_md_out_tc_occ_test + tc_sample_md_latency_test + tc_sample_acl_group_conflict_test + tc_sample_acl_rate_test + tc_sample_acl_max_rate_test +" +NUM_NETIFS=8 +CAPTURE_FILE=$(mktemp) +source $lib_dir/lib.sh +source $lib_dir/devlink_lib.sh +source mlxsw_lib.sh + +# Available at https://github.com/Mellanox/libpsample +require_command psample + +h1_create() +{ + simple_if_init $h1 192.0.2.1/28 + + ip -4 route add default vrf v$h1 nexthop via 192.0.2.2 +} + +h1_destroy() +{ + ip -4 route del default vrf v$h1 nexthop via 192.0.2.2 + + simple_if_fini $h1 192.0.2.1/28 +} + +h2_create() +{ + simple_if_init $h2 198.51.100.1/28 + + ip -4 route add default vrf v$h2 nexthop via 198.51.100.2 +} + +h2_destroy() +{ + ip -4 route del default vrf v$h2 nexthop via 198.51.100.2 + + simple_if_fini $h2 198.51.100.1/28 +} + +h3_create() +{ + ip link set dev $h3 down + ip link add name ${h3}_bond type bond mode 802.3ad + ip link set dev $h3 master ${h3}_bond + + simple_if_init ${h3}_bond 192.0.2.17/28 + + ip -4 route add default vrf v${h3}_bond nexthop via 192.0.2.18 +} + +h3_destroy() +{ + ip -4 route del default vrf v${h3}_bond nexthop via 192.0.2.18 + + simple_if_fini ${h3}_bond 192.0.2.17/28 + + ip link set dev $h3 nomaster + ip link del dev ${h3}_bond +} + +h4_create() +{ + ip link set dev $h4 down + ip link add name ${h4}_bond type bond mode 802.3ad + ip link set dev $h4 master ${h4}_bond + + simple_if_init ${h4}_bond 198.51.100.17/28 + + ip -4 route add default vrf v${h4}_bond nexthop via 198.51.100.18 +} + +h4_destroy() +{ + ip -4 route del default vrf v${h4}_bond nexthop via 198.51.100.18 + + simple_if_fini ${h4}_bond 198.51.100.17/28 + + ip link set dev $h4 nomaster + ip link del dev ${h4}_bond +} + +router_create() +{ + ip link set dev $rp1 up + __addr_add_del $rp1 add 192.0.2.2/28 + tc qdisc add dev $rp1 clsact + + ip link set dev $rp2 up + __addr_add_del $rp2 add 198.51.100.2/28 + tc qdisc add dev $rp2 clsact + + ip link add name ${rp3}_bond type bond mode 802.3ad + ip link set dev $rp3 master ${rp3}_bond + __addr_add_del ${rp3}_bond add 192.0.2.18/28 + tc qdisc add dev $rp3 clsact + ip link set dev ${rp3}_bond up + + ip link add name ${rp4}_bond type bond mode 802.3ad + ip link set dev $rp4 master ${rp4}_bond + __addr_add_del ${rp4}_bond add 198.51.100.18/28 + tc qdisc add dev $rp4 clsact + ip link set dev ${rp4}_bond up +} + +router_destroy() +{ + ip link set dev ${rp4}_bond down + tc qdisc del dev $rp4 clsact + __addr_add_del ${rp4}_bond del 198.51.100.18/28 + ip link set dev $rp4 nomaster + ip link del dev ${rp4}_bond + + ip link set dev ${rp3}_bond down + tc qdisc del dev $rp3 clsact + __addr_add_del ${rp3}_bond del 192.0.2.18/28 + ip link set dev $rp3 nomaster + ip link del dev ${rp3}_bond + + tc qdisc del dev $rp2 clsact + __addr_add_del $rp2 del 198.51.100.2/28 + ip link set dev $rp2 down + + tc qdisc del dev $rp1 clsact + __addr_add_del $rp1 del 192.0.2.2/28 + ip link set dev $rp1 down +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + rp1=${NETIFS[p2]} + rp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + h3=${NETIFS[p5]} + rp3=${NETIFS[p6]} + h4=${NETIFS[p7]} + rp4=${NETIFS[p8]} + + vrf_prepare + + h1_create + h2_create + h3_create + h4_create + router_create +} + +cleanup() +{ + pre_cleanup + + rm -f $CAPTURE_FILE + + router_destroy + h4_destroy + h3_destroy + h2_destroy + h1_destroy + + vrf_cleanup +} + +psample_capture_start() +{ + rm -f $CAPTURE_FILE + + psample &> $CAPTURE_FILE & + + sleep 1 +} + +psample_capture_stop() +{ + { kill %% && wait %%; } 2>/dev/null +} + +__tc_sample_rate_test() +{ + local desc=$1; shift + local dip=$1; shift + local pkts pct + + RET=0 + + tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \ + skip_sw action sample rate 32 group 1 + check_err $? "Failed to configure sampling rule" + + psample_capture_start + + ip vrf exec v$h1 $MZ $h1 -c 320000 -d 100usec -p 64 -A 192.0.2.1 \ + -B $dip -t udp dp=52768,sp=42768 -q + + psample_capture_stop + + pkts=$(grep -e "group 1 " $CAPTURE_FILE | wc -l) + pct=$((100 * (pkts - 10000) / 10000)) + (( -25 <= pct && pct <= 25)) + check_err $? "Expected 10000 packets, got $pkts packets, which is $pct% off. Required accuracy is +-25%" + + log_test "tc sample rate ($desc)" + + tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall +} + +tc_sample_rate_test() +{ + __tc_sample_rate_test "forward" 198.51.100.1 + __tc_sample_rate_test "local receive" 192.0.2.2 +} + +tc_sample_max_rate_test() +{ + RET=0 + + tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \ + skip_sw action sample rate $((35 * 10 ** 8)) group 1 + check_err $? "Failed to configure sampling rule with max rate" + + tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall + + tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \ + skip_sw action sample rate $((35 * 10 ** 8 + 1)) \ + group 1 &> /dev/null + check_fail $? "Managed to configure sampling rate above maximum" + + log_test "tc sample maximum rate" +} + +tc_sample_conflict_test() +{ + RET=0 + + # Test that two sampling rules cannot be configured on the same port, + # even when they share the same parameters. + + tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \ + skip_sw action sample rate 1024 group 1 + check_err $? "Failed to configure sampling rule" + + tc filter add dev $rp1 ingress protocol all pref 2 handle 102 matchall \ + skip_sw action sample rate 1024 group 1 &> /dev/null + check_fail $? "Managed to configure second sampling rule" + + # Delete the first rule and make sure the second rule can now be + # configured. + + tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall + + tc filter add dev $rp1 ingress protocol all pref 2 handle 102 matchall \ + skip_sw action sample rate 1024 group 1 + check_err $? "Failed to configure sampling rule after deletion" + + log_test "tc sample conflict test" + + tc filter del dev $rp1 ingress protocol all pref 2 handle 102 matchall +} + +tc_sample_group_conflict_test() +{ + RET=0 + + # Test that two sampling rules cannot be configured on the same port + # with different groups. + + tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \ + skip_sw action sample rate 1024 group 1 + check_err $? "Failed to configure sampling rule" + + tc filter add dev $rp1 ingress protocol all pref 2 handle 102 matchall \ + skip_sw action sample rate 1024 group 2 &> /dev/null + check_fail $? "Managed to configure sampling rule with conflicting group" + + log_test "tc sample group conflict test" + + tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall +} + +tc_sample_md_iif_test() +{ + local rp1_ifindex + + RET=0 + + tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \ + skip_sw action sample rate 5 group 1 + check_err $? "Failed to configure sampling rule" + + psample_capture_start + + ip vrf exec v$h1 $MZ $h1 -c 3200 -d 1msec -p 64 -A 192.0.2.1 \ + -B 198.51.100.1 -t udp dp=52768,sp=42768 -q + + psample_capture_stop + + rp1_ifindex=$(ip -j -p link show dev $rp1 | jq '.[]["ifindex"]') + grep -q -e "in-ifindex $rp1_ifindex " $CAPTURE_FILE + check_err $? "Sampled packets do not have expected in-ifindex" + + log_test "tc sample iif" + + tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall +} + +tc_sample_md_lag_iif_test() +{ + local rp3_ifindex + + RET=0 + + tc filter add dev $rp3 ingress protocol all pref 1 handle 101 matchall \ + skip_sw action sample rate 5 group 1 + check_err $? "Failed to configure sampling rule" + + psample_capture_start + + ip vrf exec v${h3}_bond $MZ ${h3}_bond -c 3200 -d 1msec -p 64 \ + -A 192.0.2.17 -B 198.51.100.17 -t udp dp=52768,sp=42768 -q + + psample_capture_stop + + rp3_ifindex=$(ip -j -p link show dev $rp3 | jq '.[]["ifindex"]') + grep -q -e "in-ifindex $rp3_ifindex " $CAPTURE_FILE + check_err $? "Sampled packets do not have expected in-ifindex" + + log_test "tc sample lag iif" + + tc filter del dev $rp3 ingress protocol all pref 1 handle 101 matchall +} + +tc_sample_md_oif_test() +{ + local rp2_ifindex + + RET=0 + + tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \ + skip_sw action sample rate 5 group 1 + check_err $? "Failed to configure sampling rule" + + psample_capture_start + + ip vrf exec v$h1 $MZ $h1 -c 3200 -d 1msec -p 64 -A 192.0.2.1 \ + -B 198.51.100.1 -t udp dp=52768,sp=42768 -q + + psample_capture_stop + + rp2_ifindex=$(ip -j -p link show dev $rp2 | jq '.[]["ifindex"]') + grep -q -e "out-ifindex $rp2_ifindex " $CAPTURE_FILE + check_err $? "Sampled packets do not have expected out-ifindex" + + log_test "tc sample oif" + + tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall +} + +tc_sample_md_lag_oif_test() +{ + local rp4_ifindex + + RET=0 + + tc filter add dev $rp3 ingress protocol all pref 1 handle 101 matchall \ + skip_sw action sample rate 5 group 1 + check_err $? "Failed to configure sampling rule" + + psample_capture_start + + ip vrf exec v${h3}_bond $MZ ${h3}_bond -c 3200 -d 1msec -p 64 \ + -A 192.0.2.17 -B 198.51.100.17 -t udp dp=52768,sp=42768 -q + + psample_capture_stop + + rp4_ifindex=$(ip -j -p link show dev $rp4 | jq '.[]["ifindex"]') + grep -q -e "out-ifindex $rp4_ifindex " $CAPTURE_FILE + check_err $? "Sampled packets do not have expected out-ifindex" + + log_test "tc sample lag oif" + + tc filter del dev $rp3 ingress protocol all pref 1 handle 101 matchall +} + +tc_sample_md_out_tc_test() +{ + RET=0 + + # Output traffic class is not supported on Spectrum-1. + mlxsw_only_on_spectrum 2+ || return + + tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \ + skip_sw action sample rate 5 group 1 + check_err $? "Failed to configure sampling rule" + + # By default, all the packets should go to the same traffic class (0). + + psample_capture_start + + ip vrf exec v$h1 $MZ $h1 -c 3200 -d 1msec -p 64 -A 192.0.2.1 \ + -B 198.51.100.1 -t udp dp=52768,sp=42768 -q + + psample_capture_stop + + grep -q -e "out-tc 0 " $CAPTURE_FILE + check_err $? "Sampled packets do not have expected out-tc (0)" + + # Map all priorities to highest traffic class (7) and check reported + # out-tc. + tc qdisc replace dev $rp2 root handle 1: \ + prio bands 3 priomap 0 0 0 0 0 0 0 0 + + psample_capture_start + + ip vrf exec v$h1 $MZ $h1 -c 3200 -d 1msec -p 64 -A 192.0.2.1 \ + -B 198.51.100.1 -t udp dp=52768,sp=42768 -q + + psample_capture_stop + + grep -q -e "out-tc 7 " $CAPTURE_FILE + check_err $? "Sampled packets do not have expected out-tc (7)" + + log_test "tc sample out-tc" + + tc qdisc del dev $rp2 root handle 1: + tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall +} + +tc_sample_md_out_tc_occ_test() +{ + local backlog pct occ + + RET=0 + + # Output traffic class occupancy is not supported on Spectrum-1. + mlxsw_only_on_spectrum 2+ || return + + tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \ + skip_sw action sample rate 1024 group 1 + check_err $? "Failed to configure sampling rule" + + # Configure a shaper on egress to create congestion. + tc qdisc replace dev $rp2 root handle 1: \ + tbf rate 1Mbit burst 256k limit 1M + + psample_capture_start + + ip vrf exec v$h1 $MZ $h1 -c 0 -d 1usec -p 1400 -A 192.0.2.1 \ + -B 198.51.100.1 -t udp dp=52768,sp=42768 -q & + + # Allow congestion to reach steady state. + sleep 10 + + backlog=$(tc -j -p -s qdisc show dev $rp2 | jq '.[0]["backlog"]') + + # Kill mausezahn. + { kill %% && wait %%; } 2>/dev/null + + psample_capture_stop + + # Record last congestion sample. + occ=$(grep -e "out-tc-occ " $CAPTURE_FILE | tail -n 1 | \ + cut -d ' ' -f 16) + + pct=$((100 * (occ - backlog) / backlog)) + (( -1 <= pct && pct <= 1)) + check_err $? "Recorded a congestion of $backlog bytes, but sampled congestion is $occ bytes, which is $pct% off. Required accuracy is +-5%" + + log_test "tc sample out-tc-occ" + + tc qdisc del dev $rp2 root handle 1: + tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall +} + +tc_sample_md_latency_test() +{ + RET=0 + + # Egress sampling not supported on Spectrum-1. + mlxsw_only_on_spectrum 2+ || return + + tc filter add dev $rp2 egress protocol all pref 1 handle 101 matchall \ + skip_sw action sample rate 5 group 1 + check_err $? "Failed to configure sampling rule" + + psample_capture_start + + ip vrf exec v$h1 $MZ $h1 -c 3200 -d 1msec -p 64 -A 192.0.2.1 \ + -B 198.51.100.1 -t udp dp=52768,sp=42768 -q + + psample_capture_stop + + grep -q -e "latency " $CAPTURE_FILE + check_err $? "Sampled packets do not have latency attribute" + + log_test "tc sample latency" + + tc filter del dev $rp2 egress protocol all pref 1 handle 101 matchall +} + +tc_sample_acl_group_conflict_test() +{ + RET=0 + + # Test that two flower sampling rules cannot be configured on the same + # port with different groups. + + # Policy-based sampling is not supported on Spectrum-1. + mlxsw_only_on_spectrum 2+ || return + + tc filter add dev $rp1 ingress protocol ip pref 1 handle 101 flower \ + skip_sw action sample rate 1024 group 1 + check_err $? "Failed to configure sampling rule" + + tc filter add dev $rp1 ingress protocol ip pref 2 handle 102 flower \ + skip_sw action sample rate 1024 group 1 + check_err $? "Failed to configure sampling rule with same group" + + tc filter add dev $rp1 ingress protocol ip pref 3 handle 103 flower \ + skip_sw action sample rate 1024 group 2 &> /dev/null + check_fail $? "Managed to configure sampling rule with conflicting group" + + log_test "tc sample (w/ flower) group conflict test" + + tc filter del dev $rp1 ingress protocol ip pref 2 handle 102 flower + tc filter del dev $rp1 ingress protocol ip pref 1 handle 101 flower +} + +__tc_sample_acl_rate_test() +{ + local bind=$1; shift + local port=$1; shift + local pkts pct + + RET=0 + + # Policy-based sampling is not supported on Spectrum-1. + mlxsw_only_on_spectrum 2+ || return + + tc filter add dev $port $bind protocol ip pref 1 handle 101 flower \ + skip_sw dst_ip 198.51.100.1 action sample rate 32 group 1 + check_err $? "Failed to configure sampling rule" + + psample_capture_start + + ip vrf exec v$h1 $MZ $h1 -c 320000 -d 100usec -p 64 -A 192.0.2.1 \ + -B 198.51.100.1 -t udp dp=52768,sp=42768 -q + + psample_capture_stop + + pkts=$(grep -e "group 1 " $CAPTURE_FILE | wc -l) + pct=$((100 * (pkts - 10000) / 10000)) + (( -25 <= pct && pct <= 25)) + check_err $? "Expected 10000 packets, got $pkts packets, which is $pct% off. Required accuracy is +-25%" + + # Setup a filter that should not match any packet and make sure packets + # are not sampled. + tc filter del dev $port $bind protocol ip pref 1 handle 101 flower + + tc filter add dev $port $bind protocol ip pref 1 handle 101 flower \ + skip_sw dst_ip 198.51.100.10 action sample rate 32 group 1 + check_err $? "Failed to configure sampling rule" + + psample_capture_start + + ip vrf exec v$h1 $MZ $h1 -c 3200 -d 1msec -p 64 -A 192.0.2.1 \ + -B 198.51.100.1 -t udp dp=52768,sp=42768 -q + + psample_capture_stop + + grep -q -e "group 1 " $CAPTURE_FILE + check_fail $? "Sampled packets when should not" + + log_test "tc sample (w/ flower) rate ($bind)" + + tc filter del dev $port $bind protocol ip pref 1 handle 101 flower +} + +tc_sample_acl_rate_test() +{ + __tc_sample_acl_rate_test ingress $rp1 + __tc_sample_acl_rate_test egress $rp2 +} + +tc_sample_acl_max_rate_test() +{ + RET=0 + + # Policy-based sampling is not supported on Spectrum-1. + mlxsw_only_on_spectrum 2+ || return + + tc filter add dev $rp1 ingress protocol ip pref 1 handle 101 flower \ + skip_sw action sample rate $((2 ** 24 - 1)) group 1 + check_err $? "Failed to configure sampling rule with max rate" + + tc filter del dev $rp1 ingress protocol ip pref 1 handle 101 flower + + tc filter add dev $rp1 ingress protocol ip pref 1 handle 101 flower \ + skip_sw action sample rate $((2 ** 24)) \ + group 1 &> /dev/null + check_fail $? "Managed to configure sampling rate above maximum" + + log_test "tc sample (w/ flower) maximum rate" +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/vxlan.sh b/tools/testing/selftests/drivers/net/mlxsw/vxlan.sh new file mode 100755 index 000000000..99a332b71 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/vxlan.sh @@ -0,0 +1,1164 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test various aspects of VxLAN offloading which are specific to mlxsw, such +# as sanitization of invalid configurations and offload indication. + +: ${ADDR_FAMILY:=ipv4} +export ADDR_FAMILY + +: ${LOCAL_IP_1:=198.51.100.1} +export LOCAL_IP_1 + +: ${LOCAL_IP_2:=198.51.100.2} +export LOCAL_IP_2 + +: ${PREFIX_LEN:=32} +export PREFIX_LEN + +: ${UDPCSUM_FLAFS:=noudpcsum} +export UDPCSUM_FLAFS + +: ${MC_IP:=239.0.0.1} +export MC_IP + +: ${IP_FLAG:=""} +export IP_FLAG + +: ${ALL_TESTS:=" + sanitization_test + offload_indication_test + sanitization_vlan_aware_test + offload_indication_vlan_aware_test +"} + +lib_dir=$(dirname $0)/../../../net/forwarding +NUM_NETIFS=2 +: ${TIMEOUT:=20000} # ms +source $lib_dir/lib.sh + +setup_prepare() +{ + swp1=${NETIFS[p1]} + swp2=${NETIFS[p2]} + + ip link set dev $swp1 up + ip link set dev $swp2 up +} + +cleanup() +{ + pre_cleanup + + ip link set dev $swp2 down + ip link set dev $swp1 down +} + +sanitization_single_dev_test_pass() +{ + ip link set dev $swp1 master br0 + check_err $? + ip link set dev vxlan0 master br0 + check_err $? + + ip link set dev $swp1 nomaster + + ip link set dev $swp1 master br0 + check_err $? +} + +sanitization_single_dev_test_fail() +{ + ip link set dev $swp1 master br0 + check_err $? + ip link set dev vxlan0 master br0 &> /dev/null + check_fail $? + + ip link set dev $swp1 nomaster + + ip link set dev vxlan0 master br0 + check_err $? + ip link set dev $swp1 master br0 &> /dev/null + check_fail $? +} + +sanitization_single_dev_valid_test() +{ + RET=0 + + ip link add dev br0 type bridge mcast_snooping 0 + + ip link add name vxlan0 up type vxlan id 10 nolearning $UDPCSUM_FLAFS \ + ttl 20 tos inherit local $LOCAL_IP_1 dstport 4789 + + sanitization_single_dev_test_pass + + ip link del dev vxlan0 + ip link del dev br0 + + log_test "vxlan device - valid configuration" +} + +sanitization_single_dev_vlan_aware_test() +{ + RET=0 + + ip link add dev br0 type bridge mcast_snooping 0 vlan_filtering 1 + + ip link add name vxlan0 up type vxlan id 10 nolearning $UDPCSUM_FLAFS \ + ttl 20 tos inherit local $LOCAL_IP_1 dstport 4789 + + sanitization_single_dev_test_pass + + ip link del dev vxlan0 + ip link del dev br0 + + log_test "vxlan device with a vlan-aware bridge" +} + +sanitization_single_dev_mcast_enabled_test() +{ + RET=0 + + ip link add dev br0 type bridge + + ip link add name vxlan0 up type vxlan id 10 nolearning $UDPCSUM_FLAFS \ + ttl 20 tos inherit local $LOCAL_IP_1 dstport 4789 + + sanitization_single_dev_test_fail + + ip link del dev vxlan0 + ip link del dev br0 + + log_test "vxlan device with a multicast enabled bridge" +} + +sanitization_single_dev_mcast_group_test() +{ + RET=0 + + ip link add dev br0 type bridge mcast_snooping 0 + ip link add name dummy1 up type dummy + + ip link add name vxlan0 up type vxlan id 10 nolearning $UDPCSUM_FLAFS \ + ttl 20 tos inherit local $LOCAL_IP_1 dstport 4789 \ + dev dummy1 group $MC_IP + + sanitization_single_dev_test_fail + + ip link del dev vxlan0 + ip link del dev dummy1 + ip link del dev br0 + + log_test "vxlan device with a multicast group" +} + +sanitization_single_dev_no_local_ip_test() +{ + RET=0 + + ip link add dev br0 type bridge mcast_snooping 0 + + ip link add name vxlan0 up type vxlan id 10 nolearning $UDPCSUM_FLAFS \ + ttl 20 tos inherit dstport 4789 + + sanitization_single_dev_test_fail + + ip link del dev vxlan0 + ip link del dev br0 + + log_test "vxlan device with no local ip" +} + +sanitization_single_dev_learning_enabled_ipv4_test() +{ + RET=0 + + ip link add dev br0 type bridge mcast_snooping 0 + + ip link add name vxlan0 up type vxlan id 10 learning $UDPCSUM_FLAFS \ + ttl 20 tos inherit local $LOCAL_IP_1 dstport 4789 + + sanitization_single_dev_test_pass + + ip link del dev vxlan0 + ip link del dev br0 + + log_test "vxlan device with learning enabled" +} + +sanitization_single_dev_local_interface_test() +{ + RET=0 + + ip link add dev br0 type bridge mcast_snooping 0 + ip link add name dummy1 up type dummy + + ip link add name vxlan0 up type vxlan id 10 nolearning $UDPCSUM_FLAFS \ + ttl 20 tos inherit local $LOCAL_IP_1 dstport 4789 dev dummy1 + + sanitization_single_dev_test_fail + + ip link del dev vxlan0 + ip link del dev dummy1 + ip link del dev br0 + + log_test "vxlan device with local interface" +} + +sanitization_single_dev_port_range_test() +{ + RET=0 + + ip link add dev br0 type bridge mcast_snooping 0 + + ip link add name vxlan0 up type vxlan id 10 nolearning $UDPCSUM_FLAFS \ + ttl 20 tos inherit local $LOCAL_IP_1 dstport 4789 \ + srcport 4000 5000 + + sanitization_single_dev_test_fail + + ip link del dev vxlan0 + ip link del dev br0 + + log_test "vxlan device with udp source port range" +} + +sanitization_single_dev_tos_static_test() +{ + RET=0 + + ip link add dev br0 type bridge mcast_snooping 0 + + ip link add name vxlan0 up type vxlan id 10 nolearning $UDPCSUM_FLAFS \ + ttl 20 tos 20 local $LOCAL_IP_1 dstport 4789 + + sanitization_single_dev_test_fail + + ip link del dev vxlan0 + ip link del dev br0 + + log_test "vxlan device with static tos" +} + +sanitization_single_dev_ttl_inherit_test() +{ + RET=0 + + ip link add dev br0 type bridge mcast_snooping 0 + + ip link add name vxlan0 up type vxlan id 10 nolearning $UDPCSUM_FLAFS \ + ttl inherit tos inherit local $LOCAL_IP_1 dstport 4789 + + sanitization_single_dev_test_fail + + ip link del dev vxlan0 + ip link del dev br0 + + log_test "vxlan device with inherit ttl" +} + +sanitization_single_dev_udp_checksum_ipv4_test() +{ + RET=0 + + ip link add dev br0 type bridge mcast_snooping 0 + + ip link add name vxlan0 up type vxlan id 10 nolearning udpcsum \ + ttl 20 tos inherit local $LOCAL_IP_1 dstport 4789 + + sanitization_single_dev_test_fail + + ip link del dev vxlan0 + ip link del dev br0 + + log_test "vxlan device with udp checksum" +} + +sanitization_single_dev_test() +{ + # These tests make sure that we correctly sanitize VxLAN device + # configurations we do not support + sanitization_single_dev_valid_test + sanitization_single_dev_vlan_aware_test + sanitization_single_dev_mcast_enabled_test + sanitization_single_dev_mcast_group_test + sanitization_single_dev_no_local_ip_test + sanitization_single_dev_learning_enabled_"$ADDR_FAMILY"_test + sanitization_single_dev_local_interface_test + sanitization_single_dev_port_range_test + sanitization_single_dev_tos_static_test + sanitization_single_dev_ttl_inherit_test + sanitization_single_dev_udp_checksum_"$ADDR_FAMILY"_test +} + +sanitization_multi_devs_test_pass() +{ + ip link set dev $swp1 master br0 + check_err $? + ip link set dev vxlan0 master br0 + check_err $? + ip link set dev $swp2 master br1 + check_err $? + ip link set dev vxlan1 master br1 + check_err $? + + ip link set dev $swp2 nomaster + ip link set dev $swp1 nomaster + + ip link set dev $swp1 master br0 + check_err $? + ip link set dev $swp2 master br1 + check_err $? +} + +sanitization_multi_devs_test_fail() +{ + ip link set dev $swp1 master br0 + check_err $? + ip link set dev vxlan0 master br0 + check_err $? + ip link set dev $swp2 master br1 + check_err $? + ip link set dev vxlan1 master br1 &> /dev/null + check_fail $? + + ip link set dev $swp2 nomaster + ip link set dev $swp1 nomaster + + ip link set dev vxlan1 master br1 + check_err $? + ip link set dev $swp1 master br0 + check_err $? + ip link set dev $swp2 master br1 &> /dev/null + check_fail $? +} + +sanitization_multi_devs_valid_test() +{ + RET=0 + + ip link add dev br0 type bridge mcast_snooping 0 + ip link add dev br1 type bridge mcast_snooping 0 + + ip link add name vxlan0 up type vxlan id 10 nolearning $UDPCSUM_FLAFS \ + ttl 20 tos inherit local $LOCAL_IP_1 dstport 4789 + ip link add name vxlan1 up type vxlan id 20 nolearning $UDPCSUM_FLAFS \ + ttl 20 tos inherit local $LOCAL_IP_1 dstport 4789 + + sanitization_multi_devs_test_pass + + ip link del dev vxlan1 + ip link del dev vxlan0 + ip link del dev br1 + ip link del dev br0 + + log_test "multiple vxlan devices - valid configuration" +} + +sanitization_multi_devs_ttl_test() +{ + RET=0 + + ip link add dev br0 type bridge mcast_snooping 0 + ip link add dev br1 type bridge mcast_snooping 0 + + ip link add name vxlan0 up type vxlan id 10 nolearning $UDPCSUM_FLAFS \ + ttl 20 tos inherit local $LOCAL_IP_1 dstport 4789 + ip link add name vxlan1 up type vxlan id 20 nolearning $UDPCSUM_FLAFS \ + ttl 40 tos inherit local $LOCAL_IP_1 dstport 4789 + + sanitization_multi_devs_test_fail + + ip link del dev vxlan1 + ip link del dev vxlan0 + ip link del dev br1 + ip link del dev br0 + + log_test "multiple vxlan devices with different ttl" +} + +sanitization_multi_devs_udp_dstport_test() +{ + RET=0 + + ip link add dev br0 type bridge mcast_snooping 0 + ip link add dev br1 type bridge mcast_snooping 0 + + ip link add name vxlan0 up type vxlan id 10 nolearning $UDPCSUM_FLAFS \ + ttl 20 tos inherit local $LOCAL_IP_1 dstport 4789 + ip link add name vxlan1 up type vxlan id 20 nolearning $UDPCSUM_FLAFS \ + ttl 20 tos inherit local $LOCAL_IP_1 dstport 5789 + + sanitization_multi_devs_test_fail + + ip link del dev vxlan1 + ip link del dev vxlan0 + ip link del dev br1 + ip link del dev br0 + + log_test "multiple vxlan devices with different udp destination port" +} + +sanitization_multi_devs_local_ip_test() +{ + RET=0 + + ip link add dev br0 type bridge mcast_snooping 0 + ip link add dev br1 type bridge mcast_snooping 0 + + ip link add name vxlan0 up type vxlan id 10 nolearning $UDPCSUM_FLAFS \ + ttl 20 tos inherit local $LOCAL_IP_1 dstport 4789 + ip link add name vxlan1 up type vxlan id 20 nolearning $UDPCSUM_FLAFS \ + ttl 20 tos inherit local $LOCAL_IP_2 dstport 4789 + + sanitization_multi_devs_test_fail + + ip link del dev vxlan1 + ip link del dev vxlan0 + ip link del dev br1 + ip link del dev br0 + + log_test "multiple vxlan devices with different local ip" +} + +sanitization_multi_devs_test() +{ + # The device has a single VTEP, which means all the VxLAN devices + # we offload must share certain properties such as source IP and + # UDP destination port. These tests make sure that we forbid + # configurations that violate this limitation + sanitization_multi_devs_valid_test + sanitization_multi_devs_ttl_test + sanitization_multi_devs_udp_dstport_test + sanitization_multi_devs_local_ip_test +} + +sanitization_test() +{ + sanitization_single_dev_test + sanitization_multi_devs_test +} + +offload_indication_setup_create() +{ + # Create a simple setup with two bridges, each with a VxLAN device + # and one local port + ip link add name br0 up type bridge mcast_snooping 0 + ip link add name br1 up type bridge mcast_snooping 0 + + ip link set dev $swp1 master br0 + ip link set dev $swp2 master br1 + + ip address add $LOCAL_IP_1/$PREFIX_LEN dev lo + + ip link add name vxlan0 up master br0 type vxlan id 10 nolearning \ + $UDPCSUM_FLAFS ttl 20 tos inherit local $LOCAL_IP_1 dstport 4789 + ip link add name vxlan1 up master br1 type vxlan id 20 nolearning \ + $UDPCSUM_FLAFS ttl 20 tos inherit local $LOCAL_IP_1 dstport 4789 +} + +offload_indication_setup_destroy() +{ + ip link del dev vxlan1 + ip link del dev vxlan0 + + ip address del $LOCAL_IP_1/$PREFIX_LEN dev lo + + ip link set dev $swp2 nomaster + ip link set dev $swp1 nomaster + + ip link del dev br1 + ip link del dev br0 +} + +offload_indication_fdb_flood_test() +{ + RET=0 + + bridge fdb append 00:00:00:00:00:00 dev vxlan0 self dst $LOCAL_IP_2 + + busywait "$TIMEOUT" wait_for_offload grep_bridge_fdb 00:00:00:00:00:00 \ + bridge fdb show brport vxlan0 + check_err $? + + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self + + log_test "vxlan flood entry offload indication" +} + +offload_indication_fdb_bridge_test() +{ + RET=0 + + bridge fdb add de:ad:be:ef:13:37 dev vxlan0 self master static \ + dst $LOCAL_IP_2 + + busywait "$TIMEOUT" wait_for_offload grep_bridge_fdb \ + de:ad:be:ef:13:37 self bridge fdb show brport vxlan0 + check_err $? + busywait "$TIMEOUT" wait_for_offload grep_bridge_fdb \ + de:ad:be:ef:13:37 self -v bridge fdb show brport vxlan0 + check_err $? + + log_test "vxlan entry offload indication - initial state" + + # Remove FDB entry from the bridge driver and check that corresponding + # entry in the VxLAN driver is not marked as offloaded + RET=0 + + bridge fdb del de:ad:be:ef:13:37 dev vxlan0 master + busywait "$TIMEOUT" not wait_for_offload grep_bridge_fdb \ + de:ad:be:ef:13:37 self bridge fdb show brport vxlan0 + check_err $? + + log_test "vxlan entry offload indication - after removal from bridge" + + # Add the FDB entry back to the bridge driver and make sure it is + # marked as offloaded in both drivers + RET=0 + + bridge fdb add de:ad:be:ef:13:37 dev vxlan0 master static + busywait "$TIMEOUT" wait_for_offload grep_bridge_fdb \ + de:ad:be:ef:13:37 self bridge fdb show brport vxlan0 + check_err $? + busywait "$TIMEOUT" wait_for_offload grep_bridge_fdb \ + de:ad:be:ef:13:37 self -v bridge fdb show brport vxlan0 + check_err $? + + log_test "vxlan entry offload indication - after re-add to bridge" + + # Remove FDB entry from the VxLAN driver and check that corresponding + # entry in the bridge driver is not marked as offloaded + RET=0 + + bridge fdb del de:ad:be:ef:13:37 dev vxlan0 self + busywait "$TIMEOUT" not wait_for_offload grep_bridge_fdb \ + de:ad:be:ef:13:37 self -v bridge fdb show brport vxlan0 + check_err $? + + log_test "vxlan entry offload indication - after removal from vxlan" + + # Add the FDB entry back to the VxLAN driver and make sure it is + # marked as offloaded in both drivers + RET=0 + + bridge fdb add de:ad:be:ef:13:37 dev vxlan0 self dst $LOCAL_IP_2 + busywait "$TIMEOUT" wait_for_offload grep_bridge_fdb \ + de:ad:be:ef:13:37 self bridge fdb show brport vxlan0 + check_err $? + busywait "$TIMEOUT" wait_for_offload grep_bridge_fdb \ + de:ad:be:ef:13:37 self -v bridge fdb show brport vxlan0 + check_err $? + + log_test "vxlan entry offload indication - after re-add to vxlan" + + bridge fdb del de:ad:be:ef:13:37 dev vxlan0 self master +} + +offload_indication_fdb_test() +{ + offload_indication_fdb_flood_test + offload_indication_fdb_bridge_test +} + +offload_indication_decap_route_test() +{ + RET=0 + + busywait "$TIMEOUT" wait_for_offload \ + ip $IP_FLAG route show table local $LOCAL_IP_1 + check_err $? + + ip link set dev vxlan0 down + busywait "$TIMEOUT" wait_for_offload \ + ip $IP_FLAG route show table local $LOCAL_IP_1 + check_err $? + + ip link set dev vxlan1 down + busywait "$TIMEOUT" not wait_for_offload \ + ip $IP_FLAG route show table local $LOCAL_IP_1 + check_err $? + + log_test "vxlan decap route - vxlan device down" + + RET=0 + + ip link set dev vxlan1 up + busywait "$TIMEOUT" wait_for_offload \ + ip $IP_FLAG route show table local $LOCAL_IP_1 + check_err $? + + ip link set dev vxlan0 up + busywait "$TIMEOUT" wait_for_offload \ + ip $IP_FLAG route show table local $LOCAL_IP_1 + check_err $? + + log_test "vxlan decap route - vxlan device up" + + RET=0 + + ip address delete $LOCAL_IP_1/$PREFIX_LEN dev lo + busywait "$TIMEOUT" not wait_for_offload \ + ip $IP_FLAG route show table local $LOCAL_IP_1 + check_err $? + + ip address add $LOCAL_IP_1/$PREFIX_LEN dev lo + busywait "$TIMEOUT" wait_for_offload \ + ip $IP_FLAG route show table local $LOCAL_IP_1 + check_err $? + + log_test "vxlan decap route - add local route" + + RET=0 + + ip link set dev $swp1 nomaster + busywait "$TIMEOUT" wait_for_offload \ + ip $IP_FLAG route show table local $LOCAL_IP_1 + check_err $? + + ip link set dev $swp2 nomaster + busywait "$TIMEOUT" not wait_for_offload \ + ip $IP_FLAG route show table local $LOCAL_IP_1 + check_err $? + + ip link set dev $swp1 master br0 + ip link set dev $swp2 master br1 + busywait "$TIMEOUT" wait_for_offload \ + ip $IP_FLAG route show table local $LOCAL_IP_1 + check_err $? + + log_test "vxlan decap route - local ports enslavement" + + RET=0 + + ip link del dev br0 + busywait "$TIMEOUT" wait_for_offload \ + ip $IP_FLAG route show table local $LOCAL_IP_1 + check_err $? + + ip link del dev br1 + busywait "$TIMEOUT" not wait_for_offload \ + ip $IP_FLAG route show table local $LOCAL_IP_1 + check_err $? + + log_test "vxlan decap route - bridge device deletion" + + RET=0 + + ip link add name br0 up type bridge mcast_snooping 0 + ip link add name br1 up type bridge mcast_snooping 0 + ip link set dev $swp1 master br0 + ip link set dev $swp2 master br1 + ip link set dev vxlan0 master br0 + ip link set dev vxlan1 master br1 + busywait "$TIMEOUT" wait_for_offload \ + ip $IP_FLAG route show table local $LOCAL_IP_1 + check_err $? + + ip link del dev vxlan0 + busywait "$TIMEOUT" wait_for_offload \ + ip $IP_FLAG route show table local $LOCAL_IP_1 + check_err $? + + ip link del dev vxlan1 + busywait "$TIMEOUT" not wait_for_offload \ + ip $IP_FLAG route show table local $LOCAL_IP_1 + check_err $? + + log_test "vxlan decap route - vxlan device deletion" + + ip link add name vxlan0 up master br0 type vxlan id 10 nolearning \ + $UDPCSUM_FLAFS ttl 20 tos inherit local $LOCAL_IP_1 dstport 4789 + ip link add name vxlan1 up master br1 type vxlan id 20 nolearning \ + $UDPCSUM_FLAFS ttl 20 tos inherit local $LOCAL_IP_1 dstport 4789 +} + +check_fdb_offloaded() +{ + local mac=00:11:22:33:44:55 + local zmac=00:00:00:00:00:00 + + busywait "$TIMEOUT" wait_for_offload grep_bridge_fdb $mac self \ + bridge fdb show dev vxlan0 + check_err $? + busywait "$TIMEOUT" wait_for_offload grep_bridge_fdb $mac master \ + bridge fdb show dev vxlan0 + check_err $? + + busywait "$TIMEOUT" wait_for_offload grep_bridge_fdb $zmac self \ + bridge fdb show dev vxlan0 + check_err $? +} + +check_vxlan_fdb_not_offloaded() +{ + local mac=00:11:22:33:44:55 + local zmac=00:00:00:00:00:00 + + bridge fdb show dev vxlan0 | grep $mac | grep -q self + check_err $? + busywait "$TIMEOUT" not wait_for_offload grep_bridge_fdb $mac self \ + bridge fdb show dev vxlan0 + check_err $? + + bridge fdb show dev vxlan0 | grep $zmac | grep -q self + check_err $? + busywait "$TIMEOUT" not wait_for_offload grep_bridge_fdb $zmac self \ + bridge fdb show dev vxlan0 + check_err $? +} + +check_bridge_fdb_not_offloaded() +{ + local mac=00:11:22:33:44:55 + local zmac=00:00:00:00:00:00 + + bridge fdb show dev vxlan0 | grep $mac | grep -q master + check_err $? + busywait "$TIMEOUT" not wait_for_offload grep_bridge_fdb $mac master \ + bridge fdb show dev vxlan0 + check_err $? +} + +__offload_indication_join_vxlan_first() +{ + local vid=$1; shift + + local mac=00:11:22:33:44:55 + local zmac=00:00:00:00:00:00 + + bridge fdb append $zmac dev vxlan0 self dst $LOCAL_IP_2 + + ip link set dev vxlan0 master br0 + bridge fdb add dev vxlan0 $mac self master static dst $LOCAL_IP_2 + + RET=0 + check_vxlan_fdb_not_offloaded + ip link set dev $swp1 master br0 + sleep .1 + check_fdb_offloaded + log_test "offload indication - attach vxlan first" + + RET=0 + ip link set dev vxlan0 down + check_vxlan_fdb_not_offloaded + check_bridge_fdb_not_offloaded + log_test "offload indication - set vxlan down" + + RET=0 + ip link set dev vxlan0 up + sleep .1 + check_fdb_offloaded + log_test "offload indication - set vxlan up" + + if [[ ! -z $vid ]]; then + RET=0 + bridge vlan del dev vxlan0 vid $vid + check_vxlan_fdb_not_offloaded + check_bridge_fdb_not_offloaded + log_test "offload indication - delete VLAN" + + RET=0 + bridge vlan add dev vxlan0 vid $vid + check_vxlan_fdb_not_offloaded + check_bridge_fdb_not_offloaded + log_test "offload indication - add tagged VLAN" + + RET=0 + bridge vlan add dev vxlan0 vid $vid pvid untagged + sleep .1 + check_fdb_offloaded + log_test "offload indication - add pvid/untagged VLAN" + fi + + RET=0 + ip link set dev $swp1 nomaster + check_vxlan_fdb_not_offloaded + log_test "offload indication - detach port" +} + +offload_indication_join_vxlan_first() +{ + ip link add dev br0 up type bridge mcast_snooping 0 + ip link add name vxlan0 up type vxlan id 10 nolearning $UDPCSUM_FLAFS \ + ttl 20 tos inherit local $LOCAL_IP_1 dstport 4789 + + __offload_indication_join_vxlan_first + + ip link del dev vxlan0 + ip link del dev br0 +} + +__offload_indication_join_vxlan_last() +{ + local zmac=00:00:00:00:00:00 + + RET=0 + + bridge fdb append $zmac dev vxlan0 self dst $LOCAL_IP_2 + + ip link set dev $swp1 master br0 + + busywait "$TIMEOUT" not wait_for_offload grep_bridge_fdb $zmac self \ + bridge fdb show dev vxlan0 + check_err $? + + ip link set dev vxlan0 master br0 + + busywait "$TIMEOUT" wait_for_offload grep_bridge_fdb $zmac self \ + bridge fdb show dev vxlan0 + check_err $? + + log_test "offload indication - attach vxlan last" +} + +offload_indication_join_vxlan_last() +{ + ip link add dev br0 up type bridge mcast_snooping 0 + ip link add name vxlan0 up type vxlan id 10 nolearning $UDPCSUM_FLAFS \ + ttl 20 tos inherit local $LOCAL_IP_1 dstport 4789 + + __offload_indication_join_vxlan_last + + ip link del dev vxlan0 + ip link del dev br0 +} + +offload_indication_test() +{ + offload_indication_setup_create + offload_indication_fdb_test + offload_indication_decap_route_test + offload_indication_setup_destroy + + log_info "offload indication - replay & cleanup" + offload_indication_join_vxlan_first + offload_indication_join_vxlan_last +} + +sanitization_vlan_aware_test() +{ + RET=0 + + ip link add dev br0 type bridge mcast_snooping 0 vlan_filtering 1 + + ip link add name vxlan10 up master br0 type vxlan id 10 nolearning \ + $UDPCSUM_FLAFS ttl 20 tos inherit local $LOCAL_IP_1 dstport 4789 + + ip link add name vxlan20 up master br0 type vxlan id 20 nolearning \ + $UDPCSUM_FLAFS ttl 20 tos inherit local $LOCAL_IP_1 dstport 4789 + + # Test that when each VNI is mapped to a different VLAN we can enslave + # a port to the bridge + bridge vlan add vid 10 dev vxlan10 pvid untagged + bridge vlan add vid 20 dev vxlan20 pvid untagged + + ip link set dev $swp1 master br0 + check_err $? + + log_test "vlan-aware - enslavement to vlan-aware bridge" + + # Try to map both VNIs to the same VLAN and make sure configuration + # fails + RET=0 + + bridge vlan add vid 10 dev vxlan20 pvid untagged &> /dev/null + check_fail $? + + log_test "vlan-aware - two vnis mapped to the same vlan" + + # Test that enslavement of a port to a bridge fails when two VNIs + # are mapped to the same VLAN + RET=0 + + ip link set dev $swp1 nomaster + + bridge vlan del vid 20 dev vxlan20 pvid untagged + bridge vlan add vid 10 dev vxlan20 pvid untagged + + ip link set dev $swp1 master br0 &> /dev/null + check_fail $? + + log_test "vlan-aware - failed enslavement to vlan-aware bridge" + + bridge vlan del vid 10 dev vxlan20 + bridge vlan add vid 20 dev vxlan20 pvid untagged + + # Test that when two VXLAN tunnels with conflicting configurations + # (i.e., different TTL) are enslaved to the same VLAN-aware bridge, + # then the enslavement of a port to the bridge is denied. + + # Use the offload indication of the local route to ensure the VXLAN + # configuration was correctly rollbacked. + ip address add $LOCAL_IP_1/$PREFIX_LEN dev lo + + ip link set dev vxlan10 type vxlan ttl 10 + ip link set dev $swp1 master br0 &> /dev/null + check_fail $? + + busywait "$TIMEOUT" not wait_for_offload \ + ip $IP_FLAG route show table local $LOCAL_IP_1 + check_err $? + + log_test "vlan-aware - failed enslavement to bridge due to conflict" + + ip link set dev vxlan10 type vxlan ttl 20 + ip address del $LOCAL_IP_1/$PREFIX_LEN dev lo + + ip link del dev vxlan20 + ip link del dev vxlan10 + ip link del dev br0 +} + +offload_indication_vlan_aware_setup_create() +{ + # Create a simple setup with two VxLAN devices and a single VLAN-aware + # bridge + ip link add name br0 up type bridge mcast_snooping 0 vlan_filtering 1 \ + vlan_default_pvid 0 + + ip link set dev $swp1 master br0 + + bridge vlan add vid 10 dev $swp1 + bridge vlan add vid 20 dev $swp1 + + ip address add $LOCAL_IP_1/$PREFIX_LEN dev lo + + ip link add name vxlan10 up master br0 type vxlan id 10 nolearning \ + $UDPCSUM_FLAFS ttl 20 tos inherit local $LOCAL_IP_1 dstport 4789 + ip link add name vxlan20 up master br0 type vxlan id 20 nolearning \ + $UDPCSUM_FLAFS ttl 20 tos inherit local $LOCAL_IP_1 dstport 4789 + + bridge vlan add vid 10 dev vxlan10 pvid untagged + bridge vlan add vid 20 dev vxlan20 pvid untagged +} + +offload_indication_vlan_aware_setup_destroy() +{ + bridge vlan del vid 20 dev vxlan20 + bridge vlan del vid 10 dev vxlan10 + + ip link del dev vxlan20 + ip link del dev vxlan10 + + ip address del $LOCAL_IP_1/$PREFIX_LEN dev lo + + bridge vlan del vid 20 dev $swp1 + bridge vlan del vid 10 dev $swp1 + + ip link set dev $swp1 nomaster + + ip link del dev br0 +} + +offload_indication_vlan_aware_fdb_test() +{ + RET=0 + + log_info "vxlan entry offload indication - vlan-aware" + + bridge fdb add de:ad:be:ef:13:37 dev vxlan10 self master static \ + dst $LOCAL_IP_2 vlan 10 + + busywait "$TIMEOUT" wait_for_offload grep_bridge_fdb \ + de:ad:be:ef:13:37 self bridge fdb show brport vxlan10 + check_err $? + busywait "$TIMEOUT" wait_for_offload grep_bridge_fdb \ + de:ad:be:ef:13:37 self -v bridge fdb show brport vxlan10 + check_err $? + + log_test "vxlan entry offload indication - initial state" + + # Remove FDB entry from the bridge driver and check that corresponding + # entry in the VxLAN driver is not marked as offloaded + RET=0 + + bridge fdb del de:ad:be:ef:13:37 dev vxlan10 master vlan 10 + busywait "$TIMEOUT" not wait_for_offload grep_bridge_fdb \ + de:ad:be:ef:13:37 self bridge fdb show brport vxlan10 + check_err $? + + log_test "vxlan entry offload indication - after removal from bridge" + + # Add the FDB entry back to the bridge driver and make sure it is + # marked as offloaded in both drivers + RET=0 + + bridge fdb add de:ad:be:ef:13:37 dev vxlan10 master static vlan 10 + busywait "$TIMEOUT" wait_for_offload grep_bridge_fdb \ + de:ad:be:ef:13:37 self bridge fdb show brport vxlan10 + check_err $? + busywait "$TIMEOUT" wait_for_offload grep_bridge_fdb \ + de:ad:be:ef:13:37 self -v bridge fdb show brport vxlan10 + check_err $? + + log_test "vxlan entry offload indication - after re-add to bridge" + + # Remove FDB entry from the VxLAN driver and check that corresponding + # entry in the bridge driver is not marked as offloaded + RET=0 + + bridge fdb del de:ad:be:ef:13:37 dev vxlan10 self + busywait "$TIMEOUT" not wait_for_offload grep_bridge_fdb \ + de:ad:be:ef:13:37 self -v bridge fdb show brport vxlan10 + check_err $? + + log_test "vxlan entry offload indication - after removal from vxlan" + + # Add the FDB entry back to the VxLAN driver and make sure it is + # marked as offloaded in both drivers + RET=0 + + bridge fdb add de:ad:be:ef:13:37 dev vxlan10 self dst $LOCAL_IP_2 + busywait "$TIMEOUT" wait_for_offload grep_bridge_fdb \ + de:ad:be:ef:13:37 self bridge fdb show brport vxlan10 + check_err $? + busywait "$TIMEOUT" wait_for_offload grep_bridge_fdb \ + de:ad:be:ef:13:37 self -v bridge fdb show brport vxlan10 + check_err $? + + log_test "vxlan entry offload indication - after re-add to vxlan" + + bridge fdb del de:ad:be:ef:13:37 dev vxlan10 self master vlan 10 +} + +offload_indication_vlan_aware_decap_route_test() +{ + RET=0 + + busywait "$TIMEOUT" wait_for_offload \ + ip $IP_FLAG route show table local $LOCAL_IP_1 + check_err $? + + # Toggle PVID flag on one VxLAN device and make sure route is still + # marked as offloaded + bridge vlan add vid 10 dev vxlan10 untagged + + busywait "$TIMEOUT" wait_for_offload \ + ip $IP_FLAG route show table local $LOCAL_IP_1 + check_err $? + + # Toggle PVID flag on second VxLAN device and make sure route is no + # longer marked as offloaded + bridge vlan add vid 20 dev vxlan20 untagged + + busywait "$TIMEOUT" not wait_for_offload \ + ip $IP_FLAG route show table local $LOCAL_IP_1 + check_err $? + + # Toggle PVID flag back and make sure route is marked as offloaded + bridge vlan add vid 10 dev vxlan10 pvid untagged + bridge vlan add vid 20 dev vxlan20 pvid untagged + + busywait "$TIMEOUT" wait_for_offload ip $IP_FLAG route show table local \ + $LOCAL_IP_1 + check_err $? + + log_test "vxlan decap route - vni map/unmap" +} + +offload_indication_vlan_aware_join_vxlan_first() +{ + ip link add dev br0 up type bridge mcast_snooping 0 \ + vlan_filtering 1 vlan_default_pvid 1 + ip link add name vxlan0 up type vxlan id 10 nolearning $UDPCSUM_FLAFS \ + ttl 20 tos inherit local $LOCAL_IP_1 dstport 4789 + + __offload_indication_join_vxlan_first 1 + + ip link del dev vxlan0 + ip link del dev br0 +} + +offload_indication_vlan_aware_join_vxlan_last() +{ + ip link add dev br0 up type bridge mcast_snooping 0 \ + vlan_filtering 1 vlan_default_pvid 1 + ip link add name vxlan0 up type vxlan id 10 nolearning $UDPCSUM_FLAFS \ + ttl 20 tos inherit local $LOCAL_IP_1 dstport 4789 + + __offload_indication_join_vxlan_last + + ip link del dev vxlan0 + ip link del dev br0 +} + +offload_indication_vlan_aware_l3vni_test() +{ + local zmac=00:00:00:00:00:00 + + RET=0 + + sysctl_set net.ipv6.conf.default.disable_ipv6 1 + ip link add dev br0 up type bridge mcast_snooping 0 \ + vlan_filtering 1 vlan_default_pvid 0 + ip link add name vxlan0 up type vxlan id 10 nolearning $UDPCSUM_FLAFS \ + ttl 20 tos inherit local $LOCAL_IP_1 dstport 4789 + + ip link set dev $swp1 master br0 + + # The test will use the offload indication on the FDB entry to + # understand if the tunnel is offloaded or not + bridge fdb append $zmac dev vxlan0 self dst $LOCAL_IP_2 + + ip link set dev vxlan0 master br0 + bridge vlan add dev vxlan0 vid 10 pvid untagged + + busywait "$TIMEOUT" wait_for_offload grep_bridge_fdb $zmac self \ + bridge fdb show brport vxlan0 + check_err $? "vxlan tunnel not offloaded when should" + + # Configure a VLAN interface and make sure tunnel is offloaded + ip link add link br0 name br10 up type vlan id 10 + sysctl_set net.ipv6.conf.br10.disable_ipv6 0 + ip -6 address add 2001:db8:1::1/64 dev br10 + busywait "$TIMEOUT" wait_for_offload grep_bridge_fdb $zmac self \ + bridge fdb show brport vxlan0 + check_err $? "vxlan tunnel not offloaded when should" + + # Unlink the VXLAN device, make sure tunnel is no longer offloaded, + # then add it back to the bridge and make sure it is offloaded + ip link set dev vxlan0 nomaster + busywait "$TIMEOUT" not wait_for_offload grep_bridge_fdb $zmac self \ + bridge fdb show brport vxlan0 + check_err $? "vxlan tunnel offloaded after unlinked from bridge" + + ip link set dev vxlan0 master br0 + busywait "$TIMEOUT" not wait_for_offload grep_bridge_fdb $zmac self \ + bridge fdb show brport vxlan0 + check_err $? "vxlan tunnel offloaded despite no matching vid" + + bridge vlan add dev vxlan0 vid 10 pvid untagged + busywait "$TIMEOUT" wait_for_offload grep_bridge_fdb $zmac self \ + bridge fdb show brport vxlan0 + check_err $? "vxlan tunnel not offloaded after adding vid" + + log_test "vxlan - l3 vni" + + ip link del dev vxlan0 + ip link del dev br0 + sysctl_restore net.ipv6.conf.default.disable_ipv6 +} + +offload_indication_vlan_aware_test() +{ + offload_indication_vlan_aware_setup_create + offload_indication_vlan_aware_fdb_test + offload_indication_vlan_aware_decap_route_test + offload_indication_vlan_aware_setup_destroy + + log_info "offload indication - replay & cleanup - vlan aware" + offload_indication_vlan_aware_join_vxlan_first + offload_indication_vlan_aware_join_vxlan_last + offload_indication_vlan_aware_l3vni_test +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/vxlan_fdb_veto.sh b/tools/testing/selftests/drivers/net/mlxsw/vxlan_fdb_veto.sh new file mode 100755 index 000000000..38148f518 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/vxlan_fdb_veto.sh @@ -0,0 +1,141 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test vetoing of FDB entries that mlxsw can not offload. This exercises several +# different veto vectors to test various rollback scenarios in the vxlan driver. + +: ${LOCAL_IP:=198.51.100.1} +export LOCAL_IP + +: ${REMOTE_IP_1:=198.51.100.2} +export REMOTE_IP_1 + +: ${REMOTE_IP_2:=198.51.100.3} +export REMOTE_IP_2 + +: ${UDPCSUM_FLAFS:=noudpcsum} +export UDPCSUM_FLAFS + +: ${MC_IP:=224.0.0.1} +export MC_IP + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + fdb_create_veto_test + fdb_replace_veto_test + fdb_append_veto_test + fdb_changelink_veto_test +" +NUM_NETIFS=2 +source $lib_dir/lib.sh + +setup_prepare() +{ + swp1=${NETIFS[p1]} + swp2=${NETIFS[p2]} + + ip link add dev br0 type bridge mcast_snooping 0 + + ip link set dev $swp1 up + ip link set dev $swp1 master br0 + ip link set dev $swp2 up + + ip link add name vxlan0 up type vxlan id 10 nolearning $UDPCSUM_FLAFS \ + ttl 20 tos inherit local $LOCAL_IP dstport 4789 + ip link set dev vxlan0 master br0 +} + +cleanup() +{ + pre_cleanup + + ip link set dev vxlan0 nomaster + ip link del dev vxlan0 + + ip link set dev $swp2 down + ip link set dev $swp1 nomaster + ip link set dev $swp1 down + + ip link del dev br0 +} + +fdb_create_veto_test() +{ + RET=0 + + bridge fdb add 01:02:03:04:05:06 dev vxlan0 self static \ + dst $REMOTE_IP_1 2>/dev/null + check_fail $? "multicast MAC not rejected" + + bridge fdb add 01:02:03:04:05:06 dev vxlan0 self static \ + dst $REMOTE_IP_1 2>&1 >/dev/null | grep -q mlxsw_spectrum + check_err $? "multicast MAC rejected without extack" + + log_test "vxlan FDB veto - create" +} + +fdb_replace_veto_test() +{ + RET=0 + + bridge fdb add 00:01:02:03:04:05 dev vxlan0 self static \ + dst $REMOTE_IP_1 + check_err $? "valid FDB rejected" + + bridge fdb replace 00:01:02:03:04:05 dev vxlan0 self static \ + dst $REMOTE_IP_1 port 1234 2>/dev/null + check_fail $? "FDB with an explicit port not rejected" + + bridge fdb replace 00:01:02:03:04:05 dev vxlan0 self static \ + dst $REMOTE_IP_1 port 1234 2>&1 >/dev/null \ + | grep -q mlxsw_spectrum + check_err $? "FDB with an explicit port rejected without extack" + + log_test "vxlan FDB veto - replace" +} + +fdb_append_veto_test() +{ + RET=0 + + bridge fdb add 00:00:00:00:00:00 dev vxlan0 self static \ + dst $REMOTE_IP_1 + check_err $? "valid FDB rejected" + + bridge fdb append 00:00:00:00:00:00 dev vxlan0 self static \ + dst $REMOTE_IP_2 port 1234 2>/dev/null + check_fail $? "FDB with an explicit port not rejected" + + bridge fdb append 00:00:00:00:00:00 dev vxlan0 self static \ + dst $REMOTE_IP_2 port 1234 2>&1 >/dev/null \ + | grep -q mlxsw_spectrum + check_err $? "FDB with an explicit port rejected without extack" + + log_test "vxlan FDB veto - append" +} + +fdb_changelink_veto_test() +{ + RET=0 + + ip link set dev vxlan0 type vxlan \ + group $MC_IP dev lo 2>/dev/null + check_fail $? "FDB with a multicast IP not rejected" + + ip link set dev vxlan0 type vxlan \ + group $MC_IP dev lo 2>&1 >/dev/null \ + | grep -q mlxsw_spectrum + check_err $? "FDB with a multicast IP rejected without extack" + + log_test "vxlan FDB veto - changelink" +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/vxlan_fdb_veto_ipv6.sh b/tools/testing/selftests/drivers/net/mlxsw/vxlan_fdb_veto_ipv6.sh new file mode 100755 index 000000000..66c87aab8 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/vxlan_fdb_veto_ipv6.sh @@ -0,0 +1,12 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# A wrapper to run VXLAN test for IPv6. + +LOCAL_IP=2001:db8:1::1 +REMOTE_IP_1=2001:db8:2::1 +REMOTE_IP_2=2001:db8:3::1 +UDPCSUM_FLAFS="udp6zerocsumrx udp6zerocsumtx" +MC_IP=FF02::2 + +source vxlan_fdb_veto.sh diff --git a/tools/testing/selftests/drivers/net/mlxsw/vxlan_flooding.sh b/tools/testing/selftests/drivers/net/mlxsw/vxlan_flooding.sh new file mode 100755 index 000000000..af5ea50ed --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/vxlan_flooding.sh @@ -0,0 +1,326 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test VxLAN flooding. The device stores flood records in a singly linked list +# where each record stores up to three IPv4 addresses of remote VTEPs. The test +# verifies that packets are correctly flooded in various cases such as deletion +# of a record in the middle of the list. +# +# +--------------------+ +# | H1 (vrf) | +# | + $h1 | +# | | 203.0.113.1/24| +# +----|---------------+ +# | +# +----|----------------------------------------------------------------------+ +# | SW | | +# | +--|--------------------------------------------------------------------+ | +# | | + $swp1 BR0 (802.1d) | | +# | | | | +# | | + vxlan0 (vxlan) | | +# | | local 198.51.100.1 | | +# | | remote 198.51.100.{2..13} | | +# | | id 10 dstport 4789 | | +# | +-----------------------------------------------------------------------+ | +# | | +# | 198.51.100.0/24 via 192.0.2.2 | +# | | +# | + $rp1 | +# | | 192.0.2.1/24 | +# +----|----------------------------------------------------------------------+ +# | +# +----|--------------------------------------------------------+ +# | | R2 (vrf) | +# | + $rp2 | +# | 192.0.2.2/24 | +# | | +# +-------------------------------------------------------------+ + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS="flooding_test" +NUM_NETIFS=4 +source $lib_dir/tc_common.sh +source $lib_dir/lib.sh + +h1_create() +{ + simple_if_init $h1 203.0.113.1/24 +} + +h1_destroy() +{ + simple_if_fini $h1 203.0.113.1/24 +} + +switch_create() +{ + # Make sure the bridge uses the MAC address of the local port and + # not that of the VxLAN's device + ip link add dev br0 type bridge mcast_snooping 0 + ip link set dev br0 address $(mac_get $swp1) + + ip link add name vxlan0 type vxlan id 10 nolearning noudpcsum \ + ttl 20 tos inherit local 198.51.100.1 dstport 4789 + + ip address add 198.51.100.1/32 dev lo + + ip link set dev $swp1 master br0 + ip link set dev vxlan0 master br0 + + ip link set dev br0 up + ip link set dev $swp1 up + ip link set dev vxlan0 up +} + +switch_destroy() +{ + ip link set dev vxlan0 down + ip link set dev $swp1 down + ip link set dev br0 down + + ip link set dev vxlan0 nomaster + ip link set dev $swp1 nomaster + + ip address del 198.51.100.1/32 dev lo + + ip link del dev vxlan0 + + ip link del dev br0 +} + +router1_create() +{ + # This router is in the default VRF, where the VxLAN device is + # performing the L3 lookup + ip link set dev $rp1 up + ip address add 192.0.2.1/24 dev $rp1 + ip route add 198.51.100.0/24 via 192.0.2.2 +} + +router1_destroy() +{ + ip route del 198.51.100.0/24 via 192.0.2.2 + ip address del 192.0.2.1/24 dev $rp1 + ip link set dev $rp1 down +} + +router2_create() +{ + # This router is not in the default VRF, so use simple_if_init() + simple_if_init $rp2 192.0.2.2/24 +} + +router2_destroy() +{ + simple_if_fini $rp2 192.0.2.2/24 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + rp1=${NETIFS[p3]} + rp2=${NETIFS[p4]} + + vrf_prepare + + h1_create + + switch_create + + router1_create + router2_create + + forwarding_enable +} + +cleanup() +{ + pre_cleanup + + forwarding_restore + + router2_destroy + router1_destroy + + switch_destroy + + h1_destroy + + vrf_cleanup +} + +flooding_remotes_add() +{ + local num_remotes=$1 + local lsb + local i + + for i in $(eval echo {1..$num_remotes}); do + lsb=$((i + 1)) + + bridge fdb append 00:00:00:00:00:00 dev vxlan0 self \ + dst 198.51.100.$lsb + done +} + +flooding_filters_add() +{ + local num_remotes=$1 + local lsb + local i + + # Prevent unwanted packets from entering the bridge and interfering + # with the test. + tc qdisc add dev br0 clsact + tc filter add dev br0 egress protocol all pref 1 handle 1 \ + matchall skip_hw action drop + tc qdisc add dev $h1 clsact + tc filter add dev $h1 egress protocol all pref 1 handle 1 \ + flower skip_hw dst_mac de:ad:be:ef:13:37 action pass + tc filter add dev $h1 egress protocol all pref 2 handle 2 \ + matchall skip_hw action drop + + tc qdisc add dev $rp2 clsact + + for i in $(eval echo {1..$num_remotes}); do + lsb=$((i + 1)) + + tc filter add dev $rp2 ingress protocol ip pref $i handle $i \ + flower ip_proto udp dst_ip 198.51.100.$lsb \ + dst_port 4789 skip_sw action drop + done +} + +flooding_filters_del() +{ + local num_remotes=$1 + local i + + for i in $(eval echo {1..$num_remotes}); do + tc filter del dev $rp2 ingress protocol ip pref $i \ + handle $i flower + done + + tc qdisc del dev $rp2 clsact + + tc filter del dev $h1 egress protocol all pref 2 handle 2 matchall + tc filter del dev $h1 egress protocol all pref 1 handle 1 flower + tc qdisc del dev $h1 clsact + tc filter del dev br0 egress protocol all pref 1 handle 1 matchall + tc qdisc del dev br0 clsact +} + +flooding_check_packets() +{ + local packets=("$@") + local num_remotes=${#packets[@]} + local i + + for i in $(eval echo {1..$num_remotes}); do + tc_check_packets "dev $rp2 ingress" $i ${packets[i - 1]} + check_err $? "remote $i - did not get expected number of packets" + done +} + +flooding_test() +{ + # Use 12 remote VTEPs that will be stored in 4 records. The array + # 'packets' will store how many packets are expected to be received + # by each remote VTEP at each stage of the test + declare -a packets=(1 1 1 1 1 1 1 1 1 1 1 1) + local num_remotes=12 + + RET=0 + + # Add FDB entries for remote VTEPs and corresponding tc filters on the + # ingress of the nexthop router. These filters will count how many + # packets were flooded to each remote VTEP + flooding_remotes_add $num_remotes + flooding_filters_add $num_remotes + + # Send one packet and make sure it is flooded to all the remote VTEPs + $MZ $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1 + flooding_check_packets "${packets[@]}" + log_test "flood after 1 packet" + + # Delete the third record which corresponds to VTEPs with LSB 8..10 + # and check that packet is flooded correctly when we remove a record + # from the middle of the list + RET=0 + + packets=(2 2 2 2 2 2 1 1 1 2 2 2) + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 198.51.100.8 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 198.51.100.9 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 198.51.100.10 + + $MZ $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1 + flooding_check_packets "${packets[@]}" + log_test "flood after 2 packets" + + # Delete the first record and make sure the packet is flooded correctly + RET=0 + + packets=(2 2 2 3 3 3 1 1 1 3 3 3) + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 198.51.100.2 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 198.51.100.3 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 198.51.100.4 + + $MZ $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1 + flooding_check_packets "${packets[@]}" + log_test "flood after 3 packets" + + # Delete the last record and make sure the packet is flooded correctly + RET=0 + + packets=(2 2 2 4 4 4 1 1 1 3 3 3) + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 198.51.100.11 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 198.51.100.12 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 198.51.100.13 + + $MZ $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1 + flooding_check_packets "${packets[@]}" + log_test "flood after 4 packets" + + # Delete the last record, one entry at a time and make sure single + # entries are correctly removed + RET=0 + + packets=(2 2 2 4 5 5 1 1 1 3 3 3) + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 198.51.100.5 + + $MZ $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1 + flooding_check_packets "${packets[@]}" + log_test "flood after 5 packets" + + RET=0 + + packets=(2 2 2 4 5 6 1 1 1 3 3 3) + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 198.51.100.6 + + $MZ $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1 + flooding_check_packets "${packets[@]}" + log_test "flood after 6 packets" + + RET=0 + + packets=(2 2 2 4 5 6 1 1 1 3 3 3) + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 198.51.100.7 + + $MZ $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1 + flooding_check_packets "${packets[@]}" + log_test "flood after 7 packets" + + flooding_filters_del $num_remotes +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/vxlan_ipv6.sh b/tools/testing/selftests/drivers/net/mlxsw/vxlan_ipv6.sh new file mode 100755 index 000000000..f2ea0163d --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/vxlan_ipv6.sh @@ -0,0 +1,65 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# A wrapper to run VXLAN test for IPv6. + +ADDR_FAMILY=ipv6 +LOCAL_IP_1=2001:db8:1::1 +LOCAL_IP_2=2001:db8:1::2 +PREFIX_LEN=128 +UDPCSUM_FLAFS="udp6zerocsumrx udp6zerocsumtx" +MC_IP=FF02::2 +IP_FLAG="-6" + +ALL_TESTS=" + sanitization_test + offload_indication_test + sanitization_vlan_aware_test + offload_indication_vlan_aware_test +" + +sanitization_single_dev_learning_enabled_ipv6_test() +{ + RET=0 + + ip link add dev br0 type bridge mcast_snooping 0 + + ip link add name vxlan0 up type vxlan id 10 learning $UDPCSUM_FLAFS \ + ttl 20 tos inherit local $LOCAL_IP_1 dstport 4789 + + sanitization_single_dev_test_fail + + ip link del dev vxlan0 + ip link del dev br0 + + log_test "vxlan device with learning enabled" +} + +sanitization_single_dev_udp_checksum_ipv6_test() +{ + RET=0 + + ip link add dev br0 type bridge mcast_snooping 0 + + ip link add name vxlan0 up type vxlan id 10 nolearning \ + noudp6zerocsumrx udp6zerocsumtx ttl 20 tos inherit \ + local $LOCAL_IP_1 dstport 4789 + + sanitization_single_dev_test_fail + log_test "vxlan device without zero udp checksum at RX" + + ip link del dev vxlan0 + + ip link add name vxlan0 up type vxlan id 10 nolearning \ + udp6zerocsumrx noudp6zerocsumtx ttl 20 tos inherit \ + local $LOCAL_IP_1 dstport 4789 + + sanitization_single_dev_test_fail + log_test "vxlan device without zero udp checksum at TX" + + ip link del dev vxlan0 + ip link del dev br0 + +} + +source vxlan.sh |