diff options
Diffstat (limited to '')
| -rw-r--r-- | tools/testing/selftests/ftrace/test.d/functions | 189 |
1 files changed, 189 insertions, 0 deletions
diff --git a/tools/testing/selftests/ftrace/test.d/functions b/tools/testing/selftests/ftrace/test.d/functions new file mode 100644 index 000000000..5f6cbec84 --- /dev/null +++ b/tools/testing/selftests/ftrace/test.d/functions @@ -0,0 +1,189 @@ +clear_trace() { # reset trace output + echo > trace +} + +disable_tracing() { # stop trace recording + echo 0 > tracing_on +} + +enable_tracing() { # start trace recording + echo 1 > tracing_on +} + +reset_tracer() { # reset the current tracer + echo nop > current_tracer +} + +reset_trigger_file() { + # remove action triggers first + grep -H ':on[^:]*(' $@ | + while read line; do + cmd=`echo $line | cut -f2- -d: | cut -f1 -d"["` + file=`echo $line | cut -f1 -d:` + echo "!$cmd" >> $file + done + grep -Hv ^# $@ | + while read line; do + cmd=`echo $line | cut -f2- -d: | cut -f1 -d"["` + file=`echo $line | cut -f1 -d:` + echo "!$cmd" > $file + done +} + +reset_trigger() { # reset all current setting triggers + if [ -d events/synthetic ]; then + reset_trigger_file events/synthetic/*/trigger + fi + reset_trigger_file events/*/*/trigger +} + +reset_events_filter() { # reset all current setting filters + grep -v ^none events/*/*/filter | + while read line; do + echo 0 > `echo $line | cut -f1 -d:` + done +} + +reset_ftrace_filter() { # reset all triggers in set_ftrace_filter + if [ ! -f set_ftrace_filter ]; then + return 0 + fi + echo > set_ftrace_filter + grep -v '^#' set_ftrace_filter | while read t; do + tr=`echo $t | cut -d: -f2` + if [ "$tr" = "" ]; then + continue + fi + if ! grep -q "$t" set_ftrace_filter; then + continue; + fi + name=`echo $t | cut -d: -f1 | cut -d' ' -f1` + if [ $tr = "enable_event" -o $tr = "disable_event" ]; then + tr=`echo $t | cut -d: -f2-4` + limit=`echo $t | cut -d: -f5` + else + tr=`echo $t | cut -d: -f2` + limit=`echo $t | cut -d: -f3` + fi + if [ "$limit" != "unlimited" ]; then + tr="$tr:$limit" + fi + echo "!$name:$tr" > set_ftrace_filter + done +} + +disable_events() { + echo 0 > events/enable +} + +clear_synthetic_events() { # reset all current synthetic events + grep -v ^# synthetic_events | + while read line; do + echo "!$line" >> synthetic_events + done +} + +clear_dynamic_events() { # reset all current dynamic events + again=1 + stop=1 + # loop mulitple times as some events require other to be removed first + while [ $again -eq 1 ]; do + stop=$((stop+1)) + # Prevent infinite loops + if [ $stop -gt 10 ]; then + break; + fi + again=2 + grep -v '^#' dynamic_events| + while read line; do + del=`echo $line | sed -e 's/^.\([^ ]*\).*/-\1/'` + if ! echo "$del" >> dynamic_events; then + again=1 + fi + done + done +} + +initialize_ftrace() { # Reset ftrace to initial-state +# As the initial state, ftrace will be set to nop tracer, +# no events, no triggers, no filters, no function filters, +# no probes, and tracing on. + disable_tracing + reset_tracer + reset_trigger + reset_events_filter + reset_ftrace_filter + disable_events + clear_dynamic_events + [ -f set_event_pid ] && echo > set_event_pid + [ -f set_ftrace_pid ] && echo > set_ftrace_pid + [ -f set_ftrace_notrace ] && echo > set_ftrace_notrace + [ -f set_graph_function ] && echo | tee set_graph_* + [ -f stack_trace_filter ] && echo > stack_trace_filter + [ -f kprobe_events ] && echo > kprobe_events + [ -f uprobe_events ] && echo > uprobe_events + [ -f synthetic_events ] && echo > synthetic_events + [ -f snapshot ] && echo 0 > snapshot + +# Stop tracing while reading the trace file by default, to prevent +# the test results while checking it and to avoid taking a long time +# to check the result. + [ -f options/pause-on-trace ] && echo 1 > options/pause-on-trace + + clear_trace + enable_tracing +} + +finish_ftrace() { + initialize_ftrace +# And recover it to default. + [ -f options/pause-on-trace ] && echo 0 > options/pause-on-trace +} + +check_requires() { # Check required files and tracers + for i in "$@" ; do + r=${i%:README} + t=${i%:tracer} + if [ $t != $i ]; then + if ! grep -wq $t available_tracers ; then + echo "Required tracer $t is not configured." + exit_unsupported + fi + elif [ "$r" != "$i" ]; then + if ! grep -Fq "$r" README ; then + echo "Required feature pattern \"$r\" is not in README." + exit_unsupported + fi + elif [ ! -e $i ]; then + echo "Required feature interface $i doesn't exist." + exit_unsupported + fi + done +} + +LOCALHOST=127.0.0.1 + +yield() { + ping $LOCALHOST -c 1 || sleep .001 || usleep 1 || sleep 1 +} + +# The fork function in the kernel was renamed from "_do_fork" to +# "kernel_fork". As older tests should still work with older kernels +# as well as newer kernels, check which version of fork is used on this +# kernel so that the tests can use the fork function for the running kernel. +FUNCTION_FORK=`(if grep '\bkernel_clone\b' /proc/kallsyms > /dev/null; then + echo kernel_clone; else echo '_do_fork'; fi)` + +# Since probe event command may include backslash, explicitly use printf "%s" +# to NOT interpret it. +ftrace_errlog_check() { # err-prefix command-with-error-pos-by-^ command-file + pos=$(printf "%s" "${2%^*}" | wc -c) # error position + command=$(printf "%s" "$2" | tr -d ^) + echo "Test command: $command" + echo > error_log + (! printf "%s" "$command" >> "$3" ) 2> /dev/null + grep "$1: error:" -A 3 error_log + N=$(tail -n 1 error_log | wc -c) + # " Command: " and "^\n" => 13 + test $(expr 13 + $pos) -eq $N +} |