diff options
Diffstat (limited to '')
| -rwxr-xr-x | tools/testing/selftests/ntb/ntb_test.sh | 631 |
1 files changed, 631 insertions, 0 deletions
diff --git a/tools/testing/selftests/ntb/ntb_test.sh b/tools/testing/selftests/ntb/ntb_test.sh new file mode 100755 index 000000000..020137b61 --- /dev/null +++ b/tools/testing/selftests/ntb/ntb_test.sh @@ -0,0 +1,631 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0-or-later +# Copyright (c) 2016 Microsemi. All Rights Reserved. +# +# Author: Logan Gunthorpe <logang@deltatee.com> + +REMOTE_HOST= +LIST_DEVS=FALSE + +DEBUGFS=${DEBUGFS-/sys/kernel/debug} + +PERF_RUN_ORDER=32 +MAX_MW_SIZE=0 +RUN_DMA_TESTS= +DONT_CLEANUP= +MW_SIZE=65536 + +function show_help() +{ + echo "Usage: $0 [OPTIONS] LOCAL_DEV REMOTE_DEV" + echo "Run tests on a pair of NTB endpoints." + echo + echo "If the NTB device loops back to the same host then," + echo "just specifying the two PCI ids on the command line is" + echo "sufficient. Otherwise, if the NTB link spans two hosts" + echo "use the -r option to specify the hostname for the remote" + echo "device. SSH will then be used to test the remote side." + echo "An SSH key between the root users of the host would then" + echo "be highly recommended." + echo + echo "Options:" + echo " -C don't cleanup ntb modules on exit" + echo " -h show this help message" + echo " -l list available local and remote PCI ids" + echo " -r REMOTE_HOST specify the remote's hostname to connect" + echo " to for the test (using ssh)" + echo " -m MW_SIZE memory window size for ntb_tool" + echo " (default: $MW_SIZE)" + echo " -d run dma tests for ntb_perf" + echo " -p ORDER total data order for ntb_perf" + echo " (default: $PERF_RUN_ORDER)" + echo " -w MAX_MW_SIZE maxmium memory window size for ntb_perf" + echo +} + +function parse_args() +{ + OPTIND=0 + while getopts "b:Cdhlm:r:p:w:" opt; do + case "$opt" in + C) DONT_CLEANUP=1 ;; + d) RUN_DMA_TESTS=1 ;; + h) show_help; exit 0 ;; + l) LIST_DEVS=TRUE ;; + m) MW_SIZE=${OPTARG} ;; + r) REMOTE_HOST=${OPTARG} ;; + p) PERF_RUN_ORDER=${OPTARG} ;; + w) MAX_MW_SIZE=${OPTARG} ;; + \?) + echo "Invalid option: -$OPTARG" >&2 + exit 1 + ;; + esac + done +} + +parse_args "$@" +shift $((OPTIND-1)) +LOCAL_DEV=$1 +shift +parse_args "$@" +shift $((OPTIND-1)) +REMOTE_DEV=$1 +shift +parse_args "$@" + +set -e + +function _modprobe() +{ + modprobe "$@" || return 1 + + if [[ "$REMOTE_HOST" != "" ]]; then + ssh "$REMOTE_HOST" modprobe "$@" || return 1 + fi +} + +function split_remote() +{ + VPATH=$1 + REMOTE= + + if [[ "$VPATH" == *":/"* ]]; then + REMOTE=${VPATH%%:*} + VPATH=${VPATH#*:} + fi +} + +function read_file() +{ + split_remote $1 + if [[ "$REMOTE" != "" ]]; then + ssh "$REMOTE" cat "$VPATH" + else + cat "$VPATH" + fi +} + +function write_file() +{ + split_remote $2 + VALUE=$1 + + if [[ "$REMOTE" != "" ]]; then + ssh "$REMOTE" "echo \"$VALUE\" > \"$VPATH\"" + else + echo "$VALUE" > "$VPATH" + fi +} + +function check_file() +{ + split_remote $1 + + if [[ "$REMOTE" != "" ]]; then + ssh "$REMOTE" "[[ -e ${VPATH} ]]" + else + [[ -e ${VPATH} ]] + fi +} + +function subdirname() +{ + echo $(basename $(dirname $1)) 2> /dev/null +} + +function find_pidx() +{ + PORT=$1 + PPATH=$2 + + for ((i = 0; i < 64; i++)); do + PEER_DIR="$PPATH/peer$i" + + check_file ${PEER_DIR} || break + + PEER_PORT=$(read_file "${PEER_DIR}/port") + if [[ ${PORT} -eq $PEER_PORT ]]; then + echo $i + return 0 + fi + done + + return 1 +} + +function port_test() +{ + LOC=$1 + REM=$2 + + echo "Running port tests on: $(basename $LOC) / $(basename $REM)" + + LOCAL_PORT=$(read_file "$LOC/port") + REMOTE_PORT=$(read_file "$REM/port") + + LOCAL_PIDX=$(find_pidx ${REMOTE_PORT} "$LOC") + REMOTE_PIDX=$(find_pidx ${LOCAL_PORT} "$REM") + + echo "Local port ${LOCAL_PORT} with index ${REMOTE_PIDX} on remote host" + echo "Peer port ${REMOTE_PORT} with index ${LOCAL_PIDX} on local host" + + echo " Passed" +} + +function link_test() +{ + LOC=$1 + REM=$2 + EXP=0 + + echo "Running link tests on: $(subdirname $LOC) / $(subdirname $REM)" + + if ! write_file "N" "$LOC/../link" 2> /dev/null; then + echo " Unsupported" + return + fi + + write_file "N" "$LOC/link_event" + + if [[ $(read_file "$REM/link") != "N" ]]; then + echo "Expected link to be down in $REM/link" >&2 + exit -1 + fi + + write_file "Y" "$LOC/../link" + + echo " Passed" +} + +function doorbell_test() +{ + LOC=$1 + REM=$2 + EXP=0 + + echo "Running db tests on: $(basename $LOC) / $(basename $REM)" + + DB_VALID_MASK=$(read_file "$LOC/db_valid_mask") + + write_file "c $DB_VALID_MASK" "$REM/db" + + for ((i = 0; i < 64; i++)); do + DB=$(read_file "$REM/db") + if [[ "$DB" -ne "$EXP" ]]; then + echo "Doorbell doesn't match expected value $EXP " \ + "in $REM/db" >&2 + exit -1 + fi + + let "MASK = (1 << $i) & $DB_VALID_MASK" || true + let "EXP = $EXP | $MASK" || true + + write_file "s $MASK" "$LOC/peer_db" + done + + write_file "c $DB_VALID_MASK" "$REM/db_mask" + write_file $DB_VALID_MASK "$REM/db_event" + write_file "s $DB_VALID_MASK" "$REM/db_mask" + + write_file "c $DB_VALID_MASK" "$REM/db" + + echo " Passed" +} + +function get_files_count() +{ + NAME=$1 + LOC=$2 + + split_remote $LOC + + if [[ "$REMOTE" == "" ]]; then + echo $(ls -1 "$VPATH"/${NAME}* 2>/dev/null | wc -l) + else + echo $(ssh "$REMOTE" "ls -1 \"$VPATH\"/${NAME}* | \ + wc -l" 2> /dev/null) + fi +} + +function scratchpad_test() +{ + LOC=$1 + REM=$2 + + echo "Running spad tests on: $(subdirname $LOC) / $(subdirname $REM)" + + CNT=$(get_files_count "spad" "$LOC") + + if [[ $CNT -eq 0 ]]; then + echo " Unsupported" + return + fi + + for ((i = 0; i < $CNT; i++)); do + VAL=$RANDOM + write_file "$VAL" "$LOC/spad$i" + RVAL=$(read_file "$REM/../spad$i") + + if [[ "$VAL" -ne "$RVAL" ]]; then + echo "Scratchpad $i value $RVAL doesn't match $VAL" >&2 + exit -1 + fi + done + + echo " Passed" +} + +function message_test() +{ + LOC=$1 + REM=$2 + + echo "Running msg tests on: $(subdirname $LOC) / $(subdirname $REM)" + + CNT=$(get_files_count "msg" "$LOC") + + if [[ $CNT -eq 0 ]]; then + echo " Unsupported" + return + fi + + MSG_OUTBITS_MASK=$(read_file "$LOC/../msg_inbits") + MSG_INBITS_MASK=$(read_file "$REM/../msg_inbits") + + write_file "c $MSG_OUTBITS_MASK" "$LOC/../msg_sts" + write_file "c $MSG_INBITS_MASK" "$REM/../msg_sts" + + for ((i = 0; i < $CNT; i++)); do + VAL=$RANDOM + write_file "$VAL" "$LOC/msg$i" + RVAL=$(read_file "$REM/../msg$i") + + if [[ "$VAL" -ne "${RVAL%%<-*}" ]]; then + echo "Message $i value $RVAL doesn't match $VAL" >&2 + exit -1 + fi + done + + echo " Passed" +} + +function get_number() +{ + KEY=$1 + + sed -n "s/^\(${KEY}\)[ \t]*\(0x[0-9a-fA-F]*\)\(\[p\]\)\?$/\2/p" +} + +function mw_alloc() +{ + IDX=$1 + LOC=$2 + REM=$3 + + write_file $MW_SIZE "$LOC/mw_trans$IDX" + + INB_MW=$(read_file "$LOC/mw_trans$IDX") + MW_ALIGNED_SIZE=$(echo "$INB_MW" | get_number "Window Size") + MW_DMA_ADDR=$(echo "$INB_MW" | get_number "DMA Address") + + write_file "$MW_DMA_ADDR:$(($MW_ALIGNED_SIZE))" "$REM/peer_mw_trans$IDX" + + if [[ $MW_SIZE -ne $MW_ALIGNED_SIZE ]]; then + echo "MW $IDX size aligned to $MW_ALIGNED_SIZE" + fi +} + +function write_mw() +{ + split_remote $2 + + if [[ "$REMOTE" != "" ]]; then + ssh "$REMOTE" \ + dd if=/dev/urandom "of=$VPATH" 2> /dev/null || true + else + dd if=/dev/urandom "of=$VPATH" 2> /dev/null || true + fi +} + +function mw_check() +{ + IDX=$1 + LOC=$2 + REM=$3 + + write_mw "$LOC/mw$IDX" + + split_remote "$LOC/mw$IDX" + if [[ "$REMOTE" == "" ]]; then + A=$VPATH + else + A=/tmp/ntb_test.$$.A + ssh "$REMOTE" cat "$VPATH" > "$A" + fi + + split_remote "$REM/peer_mw$IDX" + if [[ "$REMOTE" == "" ]]; then + B=$VPATH + else + B=/tmp/ntb_test.$$.B + ssh "$REMOTE" cat "$VPATH" > "$B" + fi + + cmp -n $MW_ALIGNED_SIZE "$A" "$B" + if [[ $? != 0 ]]; then + echo "Memory window $MW did not match!" >&2 + fi + + if [[ "$A" == "/tmp/*" ]]; then + rm "$A" + fi + + if [[ "$B" == "/tmp/*" ]]; then + rm "$B" + fi +} + +function mw_free() +{ + IDX=$1 + LOC=$2 + REM=$3 + + write_file "$MW_DMA_ADDR:0" "$REM/peer_mw_trans$IDX" + + write_file 0 "$LOC/mw_trans$IDX" +} + +function mw_test() +{ + LOC=$1 + REM=$2 + + CNT=$(get_files_count "mw_trans" "$LOC") + + for ((i = 0; i < $CNT; i++)); do + echo "Running mw$i tests on: $(subdirname $LOC) / " \ + "$(subdirname $REM)" + + mw_alloc $i $LOC $REM + + mw_check $i $LOC $REM + + mw_free $i $LOC $REM + + echo " Passed" + done + +} + +function pingpong_test() +{ + LOC=$1 + REM=$2 + + echo "Running ping pong tests on: $(basename $LOC) / $(basename $REM)" + + LOC_START=$(read_file "$LOC/count") + REM_START=$(read_file "$REM/count") + + sleep 7 + + LOC_END=$(read_file "$LOC/count") + REM_END=$(read_file "$REM/count") + + if [[ $LOC_START == $LOC_END ]] || [[ $REM_START == $REM_END ]]; then + echo "Ping pong counter not incrementing!" >&2 + exit 1 + fi + + echo " Passed" +} + +function msi_test() +{ + LOC=$1 + REM=$2 + + write_file 1 $LOC/ready + + echo "Running MSI interrupt tests on: $(subdirname $LOC) / $(subdirname $REM)" + + CNT=$(read_file "$LOC/count") + for ((i = 0; i < $CNT; i++)); do + START=$(read_file $REM/../irq${i}_occurrences) + write_file $i $LOC/trigger + END=$(read_file $REM/../irq${i}_occurrences) + + if [[ $(($END - $START)) != 1 ]]; then + echo "MSI did not trigger the interrupt on the remote side!" >&2 + exit 1 + fi + done + + echo " Passed" +} + +function perf_test() +{ + USE_DMA=$1 + + if [[ $USE_DMA == "1" ]]; then + WITH="with" + else + WITH="without" + fi + + _modprobe ntb_perf total_order=$PERF_RUN_ORDER \ + max_mw_size=$MAX_MW_SIZE use_dma=$USE_DMA + + echo "Running local perf test $WITH DMA" + write_file "$LOCAL_PIDX" "$LOCAL_PERF/run" + echo -n " " + read_file "$LOCAL_PERF/run" + echo " Passed" + + echo "Running remote perf test $WITH DMA" + write_file "$REMOTE_PIDX" "$REMOTE_PERF/run" + echo -n " " + read_file "$REMOTE_PERF/run" + echo " Passed" + + _modprobe -r ntb_perf +} + +function ntb_tool_tests() +{ + LOCAL_TOOL="$DEBUGFS/ntb_tool/$LOCAL_DEV" + REMOTE_TOOL="$REMOTE_HOST:$DEBUGFS/ntb_tool/$REMOTE_DEV" + + echo "Starting ntb_tool tests..." + + _modprobe ntb_tool + + port_test "$LOCAL_TOOL" "$REMOTE_TOOL" + + LOCAL_PEER_TOOL="$LOCAL_TOOL/peer$LOCAL_PIDX" + REMOTE_PEER_TOOL="$REMOTE_TOOL/peer$REMOTE_PIDX" + + link_test "$LOCAL_PEER_TOOL" "$REMOTE_PEER_TOOL" + link_test "$REMOTE_PEER_TOOL" "$LOCAL_PEER_TOOL" + + #Ensure the link is up on both sides before continuing + write_file "Y" "$LOCAL_PEER_TOOL/link_event" + write_file "Y" "$REMOTE_PEER_TOOL/link_event" + + doorbell_test "$LOCAL_TOOL" "$REMOTE_TOOL" + doorbell_test "$REMOTE_TOOL" "$LOCAL_TOOL" + + scratchpad_test "$LOCAL_PEER_TOOL" "$REMOTE_PEER_TOOL" + scratchpad_test "$REMOTE_PEER_TOOL" "$LOCAL_PEER_TOOL" + + message_test "$LOCAL_PEER_TOOL" "$REMOTE_PEER_TOOL" + message_test "$REMOTE_PEER_TOOL" "$LOCAL_PEER_TOOL" + + mw_test "$LOCAL_PEER_TOOL" "$REMOTE_PEER_TOOL" + mw_test "$REMOTE_PEER_TOOL" "$LOCAL_PEER_TOOL" + + _modprobe -r ntb_tool +} + +function ntb_pingpong_tests() +{ + LOCAL_PP="$DEBUGFS/ntb_pingpong/$LOCAL_DEV" + REMOTE_PP="$REMOTE_HOST:$DEBUGFS/ntb_pingpong/$REMOTE_DEV" + + echo "Starting ntb_pingpong tests..." + + _modprobe ntb_pingpong + + pingpong_test $LOCAL_PP $REMOTE_PP + + _modprobe -r ntb_pingpong +} + +function ntb_msi_tests() +{ + LOCAL_MSI="$DEBUGFS/ntb_msi_test/$LOCAL_DEV" + REMOTE_MSI="$REMOTE_HOST:$DEBUGFS/ntb_msi_test/$REMOTE_DEV" + + echo "Starting ntb_msi_test tests..." + + if ! _modprobe ntb_msi_test 2> /dev/null; then + echo " Not doing MSI tests seeing the module is not available." + return + fi + + port_test $LOCAL_MSI $REMOTE_MSI + + LOCAL_PEER="$LOCAL_MSI/peer$LOCAL_PIDX" + REMOTE_PEER="$REMOTE_MSI/peer$REMOTE_PIDX" + + msi_test $LOCAL_PEER $REMOTE_PEER + msi_test $REMOTE_PEER $LOCAL_PEER + + _modprobe -r ntb_msi_test +} + +function ntb_perf_tests() +{ + LOCAL_PERF="$DEBUGFS/ntb_perf/$LOCAL_DEV" + REMOTE_PERF="$REMOTE_HOST:$DEBUGFS/ntb_perf/$REMOTE_DEV" + + echo "Starting ntb_perf tests..." + + perf_test 0 + + if [[ $RUN_DMA_TESTS ]]; then + perf_test 1 + fi +} + +function cleanup() +{ + set +e + _modprobe -r ntb_tool 2> /dev/null + _modprobe -r ntb_perf 2> /dev/null + _modprobe -r ntb_pingpong 2> /dev/null + _modprobe -r ntb_transport 2> /dev/null + _modprobe -r ntb_msi_test 2> /dev/null + set -e +} + +cleanup + +if ! [[ $$DONT_CLEANUP ]]; then + trap cleanup EXIT +fi + +if [ "$(id -u)" != "0" ]; then + echo "This script must be run as root" 1>&2 + exit 1 +fi + +if [[ "$LIST_DEVS" == TRUE ]]; then + echo "Local Devices:" + ls -1 /sys/bus/ntb/devices + echo + + if [[ "$REMOTE_HOST" != "" ]]; then + echo "Remote Devices:" + ssh $REMOTE_HOST ls -1 /sys/bus/ntb/devices + fi + + exit 0 +fi + +if [[ "$LOCAL_DEV" == $"" ]] || [[ "$REMOTE_DEV" == $"" ]]; then + show_help + exit 1 +fi + +ntb_tool_tests +echo +ntb_pingpong_tests +echo +ntb_msi_tests +echo +ntb_perf_tests +echo |