diff options
Diffstat (limited to '')
| -rw-r--r-- | tools/testing/selftests/powerpc/eeh/eeh-functions.sh | 245 |
1 files changed, 245 insertions, 0 deletions
diff --git a/tools/testing/selftests/powerpc/eeh/eeh-functions.sh b/tools/testing/selftests/powerpc/eeh/eeh-functions.sh new file mode 100644 index 000000000..70daa3925 --- /dev/null +++ b/tools/testing/selftests/powerpc/eeh/eeh-functions.sh @@ -0,0 +1,245 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0-only + +export KSELFTESTS_SKIP=4 + +log() { + echo >/dev/stderr $* +} + +pe_ok() { + local dev="$1" + local path="/sys/bus/pci/devices/$dev/eeh_pe_state" + + # if a driver doesn't support the error handling callbacks then the + # device is recovered by removing and re-probing it. This causes the + # sysfs directory to disappear so read the PE state once and squash + # any potential error messages + local eeh_state="$(cat $path 2>/dev/null)" + if [ -z "$eeh_state" ]; then + return 1; + fi + + local fw_state="$(echo $eeh_state | cut -d' ' -f1)" + local sw_state="$(echo $eeh_state | cut -d' ' -f2)" + + # If EEH_PE_ISOLATED or EEH_PE_RECOVERING are set then the PE is in an + # error state or being recovered. Either way, not ok. + if [ "$((sw_state & 0x3))" -ne 0 ] ; then + return 1 + fi + + # A functioning PE should have the EEH_STATE_MMIO_ACTIVE and + # EEH_STATE_DMA_ACTIVE flags set. For some goddamn stupid reason + # the platform backends set these when the PE is in reset. The + # RECOVERING check above should stop any false positives though. + if [ "$((fw_state & 0x18))" -ne "$((0x18))" ] ; then + return 1 + fi + + return 0; +} + +eeh_supported() { + test -e /proc/powerpc/eeh && \ + grep -q 'EEH Subsystem is enabled' /proc/powerpc/eeh +} + +eeh_test_prep() { + if ! eeh_supported ; then + echo "EEH not supported on this system, skipping" + exit $KSELFTESTS_SKIP; + fi + + if [ ! -e "/sys/kernel/debug/powerpc/eeh_dev_check" ] && \ + [ ! -e "/sys/kernel/debug/powerpc/eeh_dev_break" ] ; then + log "debugfs EEH testing files are missing. Is debugfs mounted?" + exit $KSELFTESTS_SKIP; + fi + + # Bump the max freeze count to something absurd so we don't + # trip over it while breaking things. + echo 5000 > /sys/kernel/debug/powerpc/eeh_max_freezes +} + +eeh_can_break() { + # skip bridges since we can't recover them (yet...) + if [ -e "/sys/bus/pci/devices/$dev/pci_bus" ] ; then + log "$dev, Skipped: bridge" + return 1; + fi + + # The ahci driver doesn't support error recovery. If the ahci device + # happens to be hosting the root filesystem, and then we go and break + # it the system will generally go down. We should probably fix that + # at some point + if [ "ahci" = "$(basename $(realpath /sys/bus/pci/devices/$dev/driver))" ] ; then + log "$dev, Skipped: ahci doesn't support recovery" + return 1; + fi + + # Don't inject errosr into an already-frozen PE. This happens with + # PEs that contain multiple PCI devices (e.g. multi-function cards) + # and injecting new errors during the recovery process will probably + # result in the recovery failing and the device being marked as + # failed. + if ! pe_ok $dev ; then + log "$dev, Skipped: Bad initial PE state" + return 1; + fi + + return 0 +} + +eeh_one_dev() { + local dev="$1" + + # Using this function from the command line is sometimes useful for + # testing so check that the argument is a well-formed sysfs device + # name. + if ! test -e /sys/bus/pci/devices/$dev/ ; then + log "Error: '$dev' must be a sysfs device name (DDDD:BB:DD.F)" + return 1; + fi + + # Break it + echo $dev >/sys/kernel/debug/powerpc/eeh_dev_break + + # Force an EEH device check. If the kernel has already + # noticed the EEH (due to a driver poll or whatever), this + # is a no-op. + echo $dev >/sys/kernel/debug/powerpc/eeh_dev_check + + # Default to a 60s timeout when waiting for a device to recover. This + # is an arbitrary default which can be overridden by setting the + # EEH_MAX_WAIT environmental variable when required. + + # The current record holder for longest recovery time is: + # "Adaptec Series 8 12G SAS/PCIe 3" at 39 seconds + max_wait=${EEH_MAX_WAIT:=60} + + for i in `seq 0 ${max_wait}` ; do + if pe_ok $dev ; then + break; + fi + log "$dev, waited $i/${max_wait}" + sleep 1 + done + + if ! pe_ok $dev ; then + log "$dev, Failed to recover!" + return 1; + fi + + log "$dev, Recovered after $i seconds" + return 0; +} + +eeh_has_driver() { + test -e /sys/bus/pci/devices/$1/driver; + return $? +} + +eeh_can_recover() { + # we'll get an IO error if the device's current driver doesn't support + # error recovery + echo $1 > '/sys/kernel/debug/powerpc/eeh_dev_can_recover' 2>/dev/null + + return $? +} + +eeh_find_all_pfs() { + devices="" + + # SR-IOV on pseries requires hypervisor support, so check for that + is_pseries="" + if grep -q pSeries /proc/cpuinfo ; then + if [ ! -f /proc/device-tree/rtas/ibm,open-sriov-allow-unfreeze ] || + [ ! -f /proc/device-tree/rtas/ibm,open-sriov-map-pe-number ] ; then + return 1; + fi + + is_pseries="true" + fi + + for dev in `ls -1 /sys/bus/pci/devices/` ; do + sysfs="/sys/bus/pci/devices/$dev" + if [ ! -e "$sysfs/sriov_numvfs" ] ; then + continue + fi + + # skip unsupported PFs on pseries + if [ -z "$is_pseries" ] && + [ ! -f "$sysfs/of_node/ibm,is-open-sriov-pf" ] && + [ ! -f "$sysfs/of_node/ibm,open-sriov-vf-bar-info" ] ; then + continue; + fi + + # no driver, no vfs + if ! eeh_has_driver $dev ; then + continue + fi + + devices="$devices $dev" + done + + if [ -z "$devices" ] ; then + return 1; + fi + + echo $devices + return 0; +} + +# attempts to enable one VF on each PF so we can do VF specific tests. +# stdout: list of enabled VFs, one per line +# return code: 0 if vfs are found, 1 otherwise +eeh_enable_vfs() { + pf_list="$(eeh_find_all_pfs)" + + vfs=0 + for dev in $pf_list ; do + pf_sysfs="/sys/bus/pci/devices/$dev" + + # make sure we have a single VF + echo 0 > "$pf_sysfs/sriov_numvfs" + echo 1 > "$pf_sysfs/sriov_numvfs" + if [ "$?" != 0 ] ; then + log "Unable to enable VFs on $pf, skipping" + continue; + fi + + vf="$(basename $(realpath "$pf_sysfs/virtfn0"))" + if [ $? != 0 ] ; then + log "unable to find enabled vf on $pf" + echo 0 > "$pf_sysfs/sriov_numvfs" + continue; + fi + + if ! eeh_can_break $vf ; then + log "skipping " + + echo 0 > "$pf_sysfs/sriov_numvfs" + continue; + fi + + vfs="$((vfs + 1))" + echo $vf + done + + test "$vfs" != 0 + return $? +} + +eeh_disable_vfs() { + pf_list="$(eeh_find_all_pfs)" + if [ -z "$pf_list" ] ; then + return 1; + fi + + for dev in $pf_list ; do + echo 0 > "/sys/bus/pci/devices/$dev/sriov_numvfs" + done + + return 0; +} |