From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- Documentation/admin-guide/media/technisat.rst | 100 ++++++++++++++++++++++++++ 1 file changed, 100 insertions(+) create mode 100644 Documentation/admin-guide/media/technisat.rst (limited to 'Documentation/admin-guide/media/technisat.rst') diff --git a/Documentation/admin-guide/media/technisat.rst b/Documentation/admin-guide/media/technisat.rst new file mode 100644 index 000000000..9eaa12366 --- /dev/null +++ b/Documentation/admin-guide/media/technisat.rst @@ -0,0 +1,100 @@ +.. SPDX-License-Identifier: GPL-2.0 + +How to set up the Technisat/B2C2 Flexcop devices +================================================ + +.. note:: + + This documentation is outdated. + +Author: Uwe Bugla August 2009 + +Find out what device you have +----------------------------- + +Important Notice: The driver does NOT support Technisat USB 2 devices! + +First start your linux box with a shipped kernel: + +.. code-block:: none + + lspci -vvv for a PCI device (lsusb -vvv for an USB device) will show you for example: + 02:0b.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / + Technisat SkyStar2 DVB card (rev 02) + + dmesg | grep frontend may show you for example: + DVB: registering frontend 0 (Conexant CX24123/CX24109)... + +Kernel compilation: +------------------- + +If the Flexcop / Technisat is the only DVB / TV / Radio device in your box +get rid of unnecessary modules and check this one: + +``Multimedia support`` => ``Customise analog and hybrid tuner modules to build`` + +In this directory uncheck every driver which is activated there +(except ``Simple tuner support`` for ATSC 3rd generation only -> see case 9 please). + +Then please activate: + +- Main module part: + + ``Multimedia support`` => ``DVB/ATSC adapters`` => ``Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters`` + + #) => ``Technisat/B2C2 Air/Sky/Cable2PC PCI`` (PCI card) or + #) => ``Technisat/B2C2 Air/Sky/Cable2PC USB`` (USB 1.1 adapter) + and for troubleshooting purposes: + #) => ``Enable debug for the B2C2 FlexCop drivers`` + +- Frontend / Tuner / Demodulator module part: + + ``Multimedia support`` => ``DVB/ATSC adapters`` + => ``Customise the frontend modules to build`` ``Customise DVB frontends`` => + + - SkyStar DVB-S Revision 2.3: + + #) => ``Zarlink VP310/MT312/ZL10313 based`` + #) => ``Generic I2C PLL based tuners`` + + - SkyStar DVB-S Revision 2.6: + + #) => ``ST STV0299 based`` + #) => ``Generic I2C PLL based tuners`` + + - SkyStar DVB-S Revision 2.7: + + #) => ``Samsung S5H1420 based`` + #) => ``Integrant ITD1000 Zero IF tuner for DVB-S/DSS`` + #) => ``ISL6421 SEC controller`` + + - SkyStar DVB-S Revision 2.8: + + #) => ``Conexant CX24123 based`` + #) => ``Conexant CX24113/CX24128 tuner for DVB-S/DSS`` + #) => ``ISL6421 SEC controller`` + + - AirStar DVB-T card: + + #) => ``Zarlink MT352 based`` + #) => ``Generic I2C PLL based tuners`` + + - CableStar DVB-C card: + + #) => ``ST STV0297 based`` + #) => ``Generic I2C PLL based tuners`` + + - AirStar ATSC card 1st generation: + + #) => ``Broadcom BCM3510`` + + - AirStar ATSC card 2nd generation: + + #) => ``NxtWave Communications NXT2002/NXT2004 based`` + #) => ``Generic I2C PLL based tuners`` + + - AirStar ATSC card 3rd generation: + + #) => ``LG Electronics LGDT3302/LGDT3303 based`` + #) ``Multimedia support`` => ``Customise analog and hybrid tuner modules to build`` => ``Simple tuner support`` + -- cgit v1.2.3