From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- Documentation/admin-guide/pnp.rst | 288 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 288 insertions(+) create mode 100644 Documentation/admin-guide/pnp.rst (limited to 'Documentation/admin-guide/pnp.rst') diff --git a/Documentation/admin-guide/pnp.rst b/Documentation/admin-guide/pnp.rst new file mode 100644 index 000000000..3eda08191 --- /dev/null +++ b/Documentation/admin-guide/pnp.rst @@ -0,0 +1,288 @@ +================================= +Linux Plug and Play Documentation +================================= + +:Author: Adam Belay +:Last updated: Oct. 16, 2002 + + +Overview +-------- + +Plug and Play provides a means of detecting and setting resources for legacy or +otherwise unconfigurable devices. The Linux Plug and Play Layer provides these +services to compatible drivers. + + +The User Interface +------------------ + +The Linux Plug and Play user interface provides a means to activate PnP devices +for legacy and user level drivers that do not support Linux Plug and Play. The +user interface is integrated into sysfs. + +In addition to the standard sysfs file the following are created in each +device's directory: +- id - displays a list of support EISA IDs +- options - displays possible resource configurations +- resources - displays currently allocated resources and allows resource changes + +activating a device +^^^^^^^^^^^^^^^^^^^ + +:: + + # echo "auto" > resources + +this will invoke the automatic resource config system to activate the device + +manually activating a device +^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +:: + + # echo "manual " > resources + + - the configuration number + - static or dynamic + static = for next boot + dynamic = now + +disabling a device +^^^^^^^^^^^^^^^^^^ + +:: + + # echo "disable" > resources + + +EXAMPLE: + +Suppose you need to activate the floppy disk controller. + +1. change to the proper directory, in my case it is + /driver/bus/pnp/devices/00:0f:: + + # cd /driver/bus/pnp/devices/00:0f + # cat name + PC standard floppy disk controller + +2. check if the device is already active:: + + # cat resources + DISABLED + + - Notice the string "DISABLED". This means the device is not active. + +3. check the device's possible configurations (optional):: + + # cat options + Dependent: 01 - Priority acceptable + port 0x3f0-0x3f0, align 0x7, size 0x6, 16-bit address decoding + port 0x3f7-0x3f7, align 0x0, size 0x1, 16-bit address decoding + irq 6 + dma 2 8-bit compatible + Dependent: 02 - Priority acceptable + port 0x370-0x370, align 0x7, size 0x6, 16-bit address decoding + port 0x377-0x377, align 0x0, size 0x1, 16-bit address decoding + irq 6 + dma 2 8-bit compatible + +4. now activate the device:: + + # echo "auto" > resources + +5. finally check if the device is active:: + + # cat resources + io 0x3f0-0x3f5 + io 0x3f7-0x3f7 + irq 6 + dma 2 + +also there are a series of kernel parameters:: + + pnp_reserve_irq=irq1[,irq2] .... + pnp_reserve_dma=dma1[,dma2] .... + pnp_reserve_io=io1,size1[,io2,size2] .... + pnp_reserve_mem=mem1,size1[,mem2,size2] .... + + + +The Unified Plug and Play Layer +------------------------------- + +All Plug and Play drivers, protocols, and services meet at a central location +called the Plug and Play Layer. This layer is responsible for the exchange of +information between PnP drivers and PnP protocols. Thus it automatically +forwards commands to the proper protocol. This makes writing PnP drivers +significantly easier. + +The following functions are available from the Plug and Play Layer: + +pnp_get_protocol + increments the number of uses by one + +pnp_put_protocol + deincrements the number of uses by one + +pnp_register_protocol + use this to register a new PnP protocol + +pnp_unregister_protocol + use this function to remove a PnP protocol from the Plug and Play Layer + +pnp_register_driver + adds a PnP driver to the Plug and Play Layer + + this includes driver model integration + returns zero for success or a negative error number for failure; count + calls to the .add() method if you need to know how many devices bind to + the driver + +pnp_unregister_driver + removes a PnP driver from the Plug and Play Layer + + + +Plug and Play Protocols +----------------------- + +This section contains information for PnP protocol developers. + +The following Protocols are currently available in the computing world: + +- PNPBIOS: + used for system devices such as serial and parallel ports. +- ISAPNP: + provides PnP support for the ISA bus +- ACPI: + among its many uses, ACPI provides information about system level + devices. + +It is meant to replace the PNPBIOS. It is not currently supported by Linux +Plug and Play but it is planned to be in the near future. + + +Requirements for a Linux PnP protocol: +1. the protocol must use EISA IDs +2. the protocol must inform the PnP Layer of a device's current configuration + +- the ability to set resources is optional but preferred. + +The following are PnP protocol related functions: + +pnp_add_device + use this function to add a PnP device to the PnP layer + + only call this function when all wanted values are set in the pnp_dev + structure + +pnp_init_device + call this to initialize the PnP structure + +pnp_remove_device + call this to remove a device from the Plug and Play Layer. + it will fail if the device is still in use. + automatically will free mem used by the device and related structures + +pnp_add_id + adds an EISA ID to the list of supported IDs for the specified device + +For more information consult the source of a protocol such as +/drivers/pnp/pnpbios/core.c. + + + +Linux Plug and Play Drivers +--------------------------- + +This section contains information for Linux PnP driver developers. + +The New Way +^^^^^^^^^^^ + +1. first make a list of supported EISA IDS + + ex:: + + static const struct pnp_id pnp_dev_table[] = { + /* Standard LPT Printer Port */ + {.id = "PNP0400", .driver_data = 0}, + /* ECP Printer Port */ + {.id = "PNP0401", .driver_data = 0}, + {.id = ""} + }; + + Please note that the character 'X' can be used as a wild card in the function + portion (last four characters). + + ex:: + + /* Unknown PnP modems */ + { "PNPCXXX", UNKNOWN_DEV }, + + Supported PnP card IDs can optionally be defined. + ex:: + + static const struct pnp_id pnp_card_table[] = { + { "ANYDEVS", 0 }, + { "", 0 } + }; + +2. Optionally define probe and remove functions. It may make sense not to + define these functions if the driver already has a reliable method of detecting + the resources, such as the parport_pc driver. + + ex:: + + static int + serial_pnp_probe(struct pnp_dev * dev, const struct pnp_id *card_id, const + struct pnp_id *dev_id) + { + . . . + + ex:: + + static void serial_pnp_remove(struct pnp_dev * dev) + { + . . . + + consult /drivers/serial/8250_pnp.c for more information. + +3. create a driver structure + + ex:: + + static struct pnp_driver serial_pnp_driver = { + .name = "serial", + .card_id_table = pnp_card_table, + .id_table = pnp_dev_table, + .probe = serial_pnp_probe, + .remove = serial_pnp_remove, + }; + + * name and id_table cannot be NULL. + +4. register the driver + + ex:: + + static int __init serial8250_pnp_init(void) + { + return pnp_register_driver(&serial_pnp_driver); + } + +The Old Way +^^^^^^^^^^^ + +A series of compatibility functions have been created to make it easy to convert +ISAPNP drivers. They should serve as a temporary solution only. + +They are as follows:: + + struct pnp_dev *pnp_find_dev(struct pnp_card *card, + unsigned short vendor, + unsigned short function, + struct pnp_dev *from) + -- cgit v1.2.3