From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- Documentation/networking/timestamping.rst | 772 ++++++++++++++++++++++++++++++ 1 file changed, 772 insertions(+) create mode 100644 Documentation/networking/timestamping.rst (limited to 'Documentation/networking/timestamping.rst') diff --git a/Documentation/networking/timestamping.rst b/Documentation/networking/timestamping.rst new file mode 100644 index 000000000..be4eb1242 --- /dev/null +++ b/Documentation/networking/timestamping.rst @@ -0,0 +1,772 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============ +Timestamping +============ + + +1. Control Interfaces +===================== + +The interfaces for receiving network packages timestamps are: + +SO_TIMESTAMP + Generates a timestamp for each incoming packet in (not necessarily + monotonic) system time. Reports the timestamp via recvmsg() in a + control message in usec resolution. + SO_TIMESTAMP is defined as SO_TIMESTAMP_NEW or SO_TIMESTAMP_OLD + based on the architecture type and time_t representation of libc. + Control message format is in struct __kernel_old_timeval for + SO_TIMESTAMP_OLD and in struct __kernel_sock_timeval for + SO_TIMESTAMP_NEW options respectively. + +SO_TIMESTAMPNS + Same timestamping mechanism as SO_TIMESTAMP, but reports the + timestamp as struct timespec in nsec resolution. + SO_TIMESTAMPNS is defined as SO_TIMESTAMPNS_NEW or SO_TIMESTAMPNS_OLD + based on the architecture type and time_t representation of libc. + Control message format is in struct timespec for SO_TIMESTAMPNS_OLD + and in struct __kernel_timespec for SO_TIMESTAMPNS_NEW options + respectively. + +IP_MULTICAST_LOOP + SO_TIMESTAMP[NS] + Only for multicast:approximate transmit timestamp obtained by + reading the looped packet receive timestamp. + +SO_TIMESTAMPING + Generates timestamps on reception, transmission or both. Supports + multiple timestamp sources, including hardware. Supports generating + timestamps for stream sockets. + + +1.1 SO_TIMESTAMP (also SO_TIMESTAMP_OLD and SO_TIMESTAMP_NEW) +------------------------------------------------------------- + +This socket option enables timestamping of datagrams on the reception +path. Because the destination socket, if any, is not known early in +the network stack, the feature has to be enabled for all packets. The +same is true for all early receive timestamp options. + +For interface details, see `man 7 socket`. + +Always use SO_TIMESTAMP_NEW timestamp to always get timestamp in +struct __kernel_sock_timeval format. + +SO_TIMESTAMP_OLD returns incorrect timestamps after the year 2038 +on 32 bit machines. + +1.2 SO_TIMESTAMPNS (also SO_TIMESTAMPNS_OLD and SO_TIMESTAMPNS_NEW) +------------------------------------------------------------------- + +This option is identical to SO_TIMESTAMP except for the returned data type. +Its struct timespec allows for higher resolution (ns) timestamps than the +timeval of SO_TIMESTAMP (ms). + +Always use SO_TIMESTAMPNS_NEW timestamp to always get timestamp in +struct __kernel_timespec format. + +SO_TIMESTAMPNS_OLD returns incorrect timestamps after the year 2038 +on 32 bit machines. + +1.3 SO_TIMESTAMPING (also SO_TIMESTAMPING_OLD and SO_TIMESTAMPING_NEW) +---------------------------------------------------------------------- + +Supports multiple types of timestamp requests. As a result, this +socket option takes a bitmap of flags, not a boolean. In:: + + err = setsockopt(fd, SOL_SOCKET, SO_TIMESTAMPING, &val, sizeof(val)); + +val is an integer with any of the following bits set. Setting other +bit returns EINVAL and does not change the current state. + +The socket option configures timestamp generation for individual +sk_buffs (1.3.1), timestamp reporting to the socket's error +queue (1.3.2) and options (1.3.3). Timestamp generation can also +be enabled for individual sendmsg calls using cmsg (1.3.4). + + +1.3.1 Timestamp Generation +^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Some bits are requests to the stack to try to generate timestamps. Any +combination of them is valid. Changes to these bits apply to newly +created packets, not to packets already in the stack. As a result, it +is possible to selectively request timestamps for a subset of packets +(e.g., for sampling) by embedding an send() call within two setsockopt +calls, one to enable timestamp generation and one to disable it. +Timestamps may also be generated for reasons other than being +requested by a particular socket, such as when receive timestamping is +enabled system wide, as explained earlier. + +SOF_TIMESTAMPING_RX_HARDWARE: + Request rx timestamps generated by the network adapter. + +SOF_TIMESTAMPING_RX_SOFTWARE: + Request rx timestamps when data enters the kernel. These timestamps + are generated just after a device driver hands a packet to the + kernel receive stack. + +SOF_TIMESTAMPING_TX_HARDWARE: + Request tx timestamps generated by the network adapter. This flag + can be enabled via both socket options and control messages. + +SOF_TIMESTAMPING_TX_SOFTWARE: + Request tx timestamps when data leaves the kernel. These timestamps + are generated in the device driver as close as possible, but always + prior to, passing the packet to the network interface. Hence, they + require driver support and may not be available for all devices. + This flag can be enabled via both socket options and control messages. + +SOF_TIMESTAMPING_TX_SCHED: + Request tx timestamps prior to entering the packet scheduler. Kernel + transmit latency is, if long, often dominated by queuing delay. The + difference between this timestamp and one taken at + SOF_TIMESTAMPING_TX_SOFTWARE will expose this latency independent + of protocol processing. The latency incurred in protocol + processing, if any, can be computed by subtracting a userspace + timestamp taken immediately before send() from this timestamp. On + machines with virtual devices where a transmitted packet travels + through multiple devices and, hence, multiple packet schedulers, + a timestamp is generated at each layer. This allows for fine + grained measurement of queuing delay. This flag can be enabled + via both socket options and control messages. + +SOF_TIMESTAMPING_TX_ACK: + Request tx timestamps when all data in the send buffer has been + acknowledged. This only makes sense for reliable protocols. It is + currently only implemented for TCP. For that protocol, it may + over-report measurement, because the timestamp is generated when all + data up to and including the buffer at send() was acknowledged: the + cumulative acknowledgment. The mechanism ignores SACK and FACK. + This flag can be enabled via both socket options and control messages. + + +1.3.2 Timestamp Reporting +^^^^^^^^^^^^^^^^^^^^^^^^^ + +The other three bits control which timestamps will be reported in a +generated control message. Changes to the bits take immediate +effect at the timestamp reporting locations in the stack. Timestamps +are only reported for packets that also have the relevant timestamp +generation request set. + +SOF_TIMESTAMPING_SOFTWARE: + Report any software timestamps when available. + +SOF_TIMESTAMPING_SYS_HARDWARE: + This option is deprecated and ignored. + +SOF_TIMESTAMPING_RAW_HARDWARE: + Report hardware timestamps as generated by + SOF_TIMESTAMPING_TX_HARDWARE when available. + + +1.3.3 Timestamp Options +^^^^^^^^^^^^^^^^^^^^^^^ + +The interface supports the options + +SOF_TIMESTAMPING_OPT_ID: + Generate a unique identifier along with each packet. A process can + have multiple concurrent timestamping requests outstanding. Packets + can be reordered in the transmit path, for instance in the packet + scheduler. In that case timestamps will be queued onto the error + queue out of order from the original send() calls. It is not always + possible to uniquely match timestamps to the original send() calls + based on timestamp order or payload inspection alone, then. + + This option associates each packet at send() with a unique + identifier and returns that along with the timestamp. The identifier + is derived from a per-socket u32 counter (that wraps). For datagram + sockets, the counter increments with each sent packet. For stream + sockets, it increments with every byte. + + The counter starts at zero. It is initialized the first time that + the socket option is enabled. It is reset each time the option is + enabled after having been disabled. Resetting the counter does not + change the identifiers of existing packets in the system. + + This option is implemented only for transmit timestamps. There, the + timestamp is always looped along with a struct sock_extended_err. + The option modifies field ee_data to pass an id that is unique + among all possibly concurrently outstanding timestamp requests for + that socket. + + +SOF_TIMESTAMPING_OPT_CMSG: + Support recv() cmsg for all timestamped packets. Control messages + are already supported unconditionally on all packets with receive + timestamps and on IPv6 packets with transmit timestamp. This option + extends them to IPv4 packets with transmit timestamp. One use case + is to correlate packets with their egress device, by enabling socket + option IP_PKTINFO simultaneously. + + +SOF_TIMESTAMPING_OPT_TSONLY: + Applies to transmit timestamps only. Makes the kernel return the + timestamp as a cmsg alongside an empty packet, as opposed to + alongside the original packet. This reduces the amount of memory + charged to the socket's receive budget (SO_RCVBUF) and delivers + the timestamp even if sysctl net.core.tstamp_allow_data is 0. + This option disables SOF_TIMESTAMPING_OPT_CMSG. + +SOF_TIMESTAMPING_OPT_STATS: + Optional stats that are obtained along with the transmit timestamps. + It must be used together with SOF_TIMESTAMPING_OPT_TSONLY. When the + transmit timestamp is available, the stats are available in a + separate control message of type SCM_TIMESTAMPING_OPT_STATS, as a + list of TLVs (struct nlattr) of types. These stats allow the + application to associate various transport layer stats with + the transmit timestamps, such as how long a certain block of + data was limited by peer's receiver window. + +SOF_TIMESTAMPING_OPT_PKTINFO: + Enable the SCM_TIMESTAMPING_PKTINFO control message for incoming + packets with hardware timestamps. The message contains struct + scm_ts_pktinfo, which supplies the index of the real interface which + received the packet and its length at layer 2. A valid (non-zero) + interface index will be returned only if CONFIG_NET_RX_BUSY_POLL is + enabled and the driver is using NAPI. The struct contains also two + other fields, but they are reserved and undefined. + +SOF_TIMESTAMPING_OPT_TX_SWHW: + Request both hardware and software timestamps for outgoing packets + when SOF_TIMESTAMPING_TX_HARDWARE and SOF_TIMESTAMPING_TX_SOFTWARE + are enabled at the same time. If both timestamps are generated, + two separate messages will be looped to the socket's error queue, + each containing just one timestamp. + +New applications are encouraged to pass SOF_TIMESTAMPING_OPT_ID to +disambiguate timestamps and SOF_TIMESTAMPING_OPT_TSONLY to operate +regardless of the setting of sysctl net.core.tstamp_allow_data. + +An exception is when a process needs additional cmsg data, for +instance SOL_IP/IP_PKTINFO to detect the egress network interface. +Then pass option SOF_TIMESTAMPING_OPT_CMSG. This option depends on +having access to the contents of the original packet, so cannot be +combined with SOF_TIMESTAMPING_OPT_TSONLY. + + +1.3.4. Enabling timestamps via control messages +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +In addition to socket options, timestamp generation can be requested +per write via cmsg, only for SOF_TIMESTAMPING_TX_* (see Section 1.3.1). +Using this feature, applications can sample timestamps per sendmsg() +without paying the overhead of enabling and disabling timestamps via +setsockopt:: + + struct msghdr *msg; + ... + cmsg = CMSG_FIRSTHDR(msg); + cmsg->cmsg_level = SOL_SOCKET; + cmsg->cmsg_type = SO_TIMESTAMPING; + cmsg->cmsg_len = CMSG_LEN(sizeof(__u32)); + *((__u32 *) CMSG_DATA(cmsg)) = SOF_TIMESTAMPING_TX_SCHED | + SOF_TIMESTAMPING_TX_SOFTWARE | + SOF_TIMESTAMPING_TX_ACK; + err = sendmsg(fd, msg, 0); + +The SOF_TIMESTAMPING_TX_* flags set via cmsg will override +the SOF_TIMESTAMPING_TX_* flags set via setsockopt. + +Moreover, applications must still enable timestamp reporting via +setsockopt to receive timestamps:: + + __u32 val = SOF_TIMESTAMPING_SOFTWARE | + SOF_TIMESTAMPING_OPT_ID /* or any other flag */; + err = setsockopt(fd, SOL_SOCKET, SO_TIMESTAMPING, &val, sizeof(val)); + + +1.4 Bytestream Timestamps +------------------------- + +The SO_TIMESTAMPING interface supports timestamping of bytes in a +bytestream. Each request is interpreted as a request for when the +entire contents of the buffer has passed a timestamping point. That +is, for streams option SOF_TIMESTAMPING_TX_SOFTWARE will record +when all bytes have reached the device driver, regardless of how +many packets the data has been converted into. + +In general, bytestreams have no natural delimiters and therefore +correlating a timestamp with data is non-trivial. A range of bytes +may be split across segments, any segments may be merged (possibly +coalescing sections of previously segmented buffers associated with +independent send() calls). Segments can be reordered and the same +byte range can coexist in multiple segments for protocols that +implement retransmissions. + +It is essential that all timestamps implement the same semantics, +regardless of these possible transformations, as otherwise they are +incomparable. Handling "rare" corner cases differently from the +simple case (a 1:1 mapping from buffer to skb) is insufficient +because performance debugging often needs to focus on such outliers. + +In practice, timestamps can be correlated with segments of a +bytestream consistently, if both semantics of the timestamp and the +timing of measurement are chosen correctly. This challenge is no +different from deciding on a strategy for IP fragmentation. There, the +definition is that only the first fragment is timestamped. For +bytestreams, we chose that a timestamp is generated only when all +bytes have passed a point. SOF_TIMESTAMPING_TX_ACK as defined is easy to +implement and reason about. An implementation that has to take into +account SACK would be more complex due to possible transmission holes +and out of order arrival. + +On the host, TCP can also break the simple 1:1 mapping from buffer to +skbuff as a result of Nagle, cork, autocork, segmentation and GSO. The +implementation ensures correctness in all cases by tracking the +individual last byte passed to send(), even if it is no longer the +last byte after an skbuff extend or merge operation. It stores the +relevant sequence number in skb_shinfo(skb)->tskey. Because an skbuff +has only one such field, only one timestamp can be generated. + +In rare cases, a timestamp request can be missed if two requests are +collapsed onto the same skb. A process can detect this situation by +enabling SOF_TIMESTAMPING_OPT_ID and comparing the byte offset at +send time with the value returned for each timestamp. It can prevent +the situation by always flushing the TCP stack in between requests, +for instance by enabling TCP_NODELAY and disabling TCP_CORK and +autocork. + +These precautions ensure that the timestamp is generated only when all +bytes have passed a timestamp point, assuming that the network stack +itself does not reorder the segments. The stack indeed tries to avoid +reordering. The one exception is under administrator control: it is +possible to construct a packet scheduler configuration that delays +segments from the same stream differently. Such a setup would be +unusual. + + +2 Data Interfaces +================== + +Timestamps are read using the ancillary data feature of recvmsg(). +See `man 3 cmsg` for details of this interface. The socket manual +page (`man 7 socket`) describes how timestamps generated with +SO_TIMESTAMP and SO_TIMESTAMPNS records can be retrieved. + + +2.1 SCM_TIMESTAMPING records +---------------------------- + +These timestamps are returned in a control message with cmsg_level +SOL_SOCKET, cmsg_type SCM_TIMESTAMPING, and payload of type + +For SO_TIMESTAMPING_OLD:: + + struct scm_timestamping { + struct timespec ts[3]; + }; + +For SO_TIMESTAMPING_NEW:: + + struct scm_timestamping64 { + struct __kernel_timespec ts[3]; + +Always use SO_TIMESTAMPING_NEW timestamp to always get timestamp in +struct scm_timestamping64 format. + +SO_TIMESTAMPING_OLD returns incorrect timestamps after the year 2038 +on 32 bit machines. + +The structure can return up to three timestamps. This is a legacy +feature. At least one field is non-zero at any time. Most timestamps +are passed in ts[0]. Hardware timestamps are passed in ts[2]. + +ts[1] used to hold hardware timestamps converted to system time. +Instead, expose the hardware clock device on the NIC directly as +a HW PTP clock source, to allow time conversion in userspace and +optionally synchronize system time with a userspace PTP stack such +as linuxptp. For the PTP clock API, see Documentation/driver-api/ptp.rst. + +Note that if the SO_TIMESTAMP or SO_TIMESTAMPNS option is enabled +together with SO_TIMESTAMPING using SOF_TIMESTAMPING_SOFTWARE, a false +software timestamp will be generated in the recvmsg() call and passed +in ts[0] when a real software timestamp is missing. This happens also +on hardware transmit timestamps. + +2.1.1 Transmit timestamps with MSG_ERRQUEUE +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +For transmit timestamps the outgoing packet is looped back to the +socket's error queue with the send timestamp(s) attached. A process +receives the timestamps by calling recvmsg() with flag MSG_ERRQUEUE +set and with a msg_control buffer sufficiently large to receive the +relevant metadata structures. The recvmsg call returns the original +outgoing data packet with two ancillary messages attached. + +A message of cm_level SOL_IP(V6) and cm_type IP(V6)_RECVERR +embeds a struct sock_extended_err. This defines the error type. For +timestamps, the ee_errno field is ENOMSG. The other ancillary message +will have cm_level SOL_SOCKET and cm_type SCM_TIMESTAMPING. This +embeds the struct scm_timestamping. + + +2.1.1.2 Timestamp types +~~~~~~~~~~~~~~~~~~~~~~~ + +The semantics of the three struct timespec are defined by field +ee_info in the extended error structure. It contains a value of +type SCM_TSTAMP_* to define the actual timestamp passed in +scm_timestamping. + +The SCM_TSTAMP_* types are 1:1 matches to the SOF_TIMESTAMPING_* +control fields discussed previously, with one exception. For legacy +reasons, SCM_TSTAMP_SND is equal to zero and can be set for both +SOF_TIMESTAMPING_TX_HARDWARE and SOF_TIMESTAMPING_TX_SOFTWARE. It +is the first if ts[2] is non-zero, the second otherwise, in which +case the timestamp is stored in ts[0]. + + +2.1.1.3 Fragmentation +~~~~~~~~~~~~~~~~~~~~~ + +Fragmentation of outgoing datagrams is rare, but is possible, e.g., by +explicitly disabling PMTU discovery. If an outgoing packet is fragmented, +then only the first fragment is timestamped and returned to the sending +socket. + + +2.1.1.4 Packet Payload +~~~~~~~~~~~~~~~~~~~~~~ + +The calling application is often not interested in receiving the whole +packet payload that it passed to the stack originally: the socket +error queue mechanism is just a method to piggyback the timestamp on. +In this case, the application can choose to read datagrams with a +smaller buffer, possibly even of length 0. The payload is truncated +accordingly. Until the process calls recvmsg() on the error queue, +however, the full packet is queued, taking up budget from SO_RCVBUF. + + +2.1.1.5 Blocking Read +~~~~~~~~~~~~~~~~~~~~~ + +Reading from the error queue is always a non-blocking operation. To +block waiting on a timestamp, use poll or select. poll() will return +POLLERR in pollfd.revents if any data is ready on the error queue. +There is no need to pass this flag in pollfd.events. This flag is +ignored on request. See also `man 2 poll`. + + +2.1.2 Receive timestamps +^^^^^^^^^^^^^^^^^^^^^^^^ + +On reception, there is no reason to read from the socket error queue. +The SCM_TIMESTAMPING ancillary data is sent along with the packet data +on a normal recvmsg(). Since this is not a socket error, it is not +accompanied by a message SOL_IP(V6)/IP(V6)_RECVERROR. In this case, +the meaning of the three fields in struct scm_timestamping is +implicitly defined. ts[0] holds a software timestamp if set, ts[1] +is again deprecated and ts[2] holds a hardware timestamp if set. + + +3. Hardware Timestamping configuration: SIOCSHWTSTAMP and SIOCGHWTSTAMP +======================================================================= + +Hardware time stamping must also be initialized for each device driver +that is expected to do hardware time stamping. The parameter is defined in +include/uapi/linux/net_tstamp.h as:: + + struct hwtstamp_config { + int flags; /* no flags defined right now, must be zero */ + int tx_type; /* HWTSTAMP_TX_* */ + int rx_filter; /* HWTSTAMP_FILTER_* */ + }; + +Desired behavior is passed into the kernel and to a specific device by +calling ioctl(SIOCSHWTSTAMP) with a pointer to a struct ifreq whose +ifr_data points to a struct hwtstamp_config. The tx_type and +rx_filter are hints to the driver what it is expected to do. If +the requested fine-grained filtering for incoming packets is not +supported, the driver may time stamp more than just the requested types +of packets. + +Drivers are free to use a more permissive configuration than the requested +configuration. It is expected that drivers should only implement directly the +most generic mode that can be supported. For example if the hardware can +support HWTSTAMP_FILTER_PTP_V2_EVENT, then it should generally always upscale +HWTSTAMP_FILTER_PTP_V2_L2_SYNC, and so forth, as HWTSTAMP_FILTER_PTP_V2_EVENT +is more generic (and more useful to applications). + +A driver which supports hardware time stamping shall update the struct +with the actual, possibly more permissive configuration. If the +requested packets cannot be time stamped, then nothing should be +changed and ERANGE shall be returned (in contrast to EINVAL, which +indicates that SIOCSHWTSTAMP is not supported at all). + +Only a processes with admin rights may change the configuration. User +space is responsible to ensure that multiple processes don't interfere +with each other and that the settings are reset. + +Any process can read the actual configuration by passing this +structure to ioctl(SIOCGHWTSTAMP) in the same way. However, this has +not been implemented in all drivers. + +:: + + /* possible values for hwtstamp_config->tx_type */ + enum { + /* + * no outgoing packet will need hardware time stamping; + * should a packet arrive which asks for it, no hardware + * time stamping will be done + */ + HWTSTAMP_TX_OFF, + + /* + * enables hardware time stamping for outgoing packets; + * the sender of the packet decides which are to be + * time stamped by setting SOF_TIMESTAMPING_TX_SOFTWARE + * before sending the packet + */ + HWTSTAMP_TX_ON, + }; + + /* possible values for hwtstamp_config->rx_filter */ + enum { + /* time stamp no incoming packet at all */ + HWTSTAMP_FILTER_NONE, + + /* time stamp any incoming packet */ + HWTSTAMP_FILTER_ALL, + + /* return value: time stamp all packets requested plus some others */ + HWTSTAMP_FILTER_SOME, + + /* PTP v1, UDP, any kind of event packet */ + HWTSTAMP_FILTER_PTP_V1_L4_EVENT, + + /* for the complete list of values, please check + * the include file include/uapi/linux/net_tstamp.h + */ + }; + +3.1 Hardware Timestamping Implementation: Device Drivers +-------------------------------------------------------- + +A driver which supports hardware time stamping must support the +SIOCSHWTSTAMP ioctl and update the supplied struct hwtstamp_config with +the actual values as described in the section on SIOCSHWTSTAMP. It +should also support SIOCGHWTSTAMP. + +Time stamps for received packets must be stored in the skb. To get a pointer +to the shared time stamp structure of the skb call skb_hwtstamps(). Then +set the time stamps in the structure:: + + struct skb_shared_hwtstamps { + /* hardware time stamp transformed into duration + * since arbitrary point in time + */ + ktime_t hwtstamp; + }; + +Time stamps for outgoing packets are to be generated as follows: + +- In hard_start_xmit(), check if (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) + is set no-zero. If yes, then the driver is expected to do hardware time + stamping. +- If this is possible for the skb and requested, then declare + that the driver is doing the time stamping by setting the flag + SKBTX_IN_PROGRESS in skb_shinfo(skb)->tx_flags , e.g. with:: + + skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; + + You might want to keep a pointer to the associated skb for the next step + and not free the skb. A driver not supporting hardware time stamping doesn't + do that. A driver must never touch sk_buff::tstamp! It is used to store + software generated time stamps by the network subsystem. +- Driver should call skb_tx_timestamp() as close to passing sk_buff to hardware + as possible. skb_tx_timestamp() provides a software time stamp if requested + and hardware timestamping is not possible (SKBTX_IN_PROGRESS not set). +- As soon as the driver has sent the packet and/or obtained a + hardware time stamp for it, it passes the time stamp back by + calling skb_tstamp_tx() with the original skb, the raw + hardware time stamp. skb_tstamp_tx() clones the original skb and + adds the timestamps, therefore the original skb has to be freed now. + If obtaining the hardware time stamp somehow fails, then the driver + should not fall back to software time stamping. The rationale is that + this would occur at a later time in the processing pipeline than other + software time stamping and therefore could lead to unexpected deltas + between time stamps. + +3.2 Special considerations for stacked PTP Hardware Clocks +---------------------------------------------------------- + +There are situations when there may be more than one PHC (PTP Hardware Clock) +in the data path of a packet. The kernel has no explicit mechanism to allow the +user to select which PHC to use for timestamping Ethernet frames. Instead, the +assumption is that the outermost PHC is always the most preferable, and that +kernel drivers collaborate towards achieving that goal. Currently there are 3 +cases of stacked PHCs, detailed below: + +3.2.1 DSA (Distributed Switch Architecture) switches +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +These are Ethernet switches which have one of their ports connected to an +(otherwise completely unaware) host Ethernet interface, and perform the role of +a port multiplier with optional forwarding acceleration features. Each DSA +switch port is visible to the user as a standalone (virtual) network interface, +and its network I/O is performed, under the hood, indirectly through the host +interface (redirecting to the host port on TX, and intercepting frames on RX). + +When a DSA switch is attached to a host port, PTP synchronization has to +suffer, since the switch's variable queuing delay introduces a path delay +jitter between the host port and its PTP partner. For this reason, some DSA +switches include a timestamping clock of their own, and have the ability to +perform network timestamping on their own MAC, such that path delays only +measure wire and PHY propagation latencies. Timestamping DSA switches are +supported in Linux and expose the same ABI as any other network interface (save +for the fact that the DSA interfaces are in fact virtual in terms of network +I/O, they do have their own PHC). It is typical, but not mandatory, for all +interfaces of a DSA switch to share the same PHC. + +By design, PTP timestamping with a DSA switch does not need any special +handling in the driver for the host port it is attached to. However, when the +host port also supports PTP timestamping, DSA will take care of intercepting +the ``.ndo_eth_ioctl`` calls towards the host port, and block attempts to enable +hardware timestamping on it. This is because the SO_TIMESTAMPING API does not +allow the delivery of multiple hardware timestamps for the same packet, so +anybody else except for the DSA switch port must be prevented from doing so. + +In the generic layer, DSA provides the following infrastructure for PTP +timestamping: + +- ``.port_txtstamp()``: a hook called prior to the transmission of + packets with a hardware TX timestamping request from user space. + This is required for two-step timestamping, since the hardware + timestamp becomes available after the actual MAC transmission, so the + driver must be prepared to correlate the timestamp with the original + packet so that it can re-enqueue the packet back into the socket's + error queue. To save the packet for when the timestamp becomes + available, the driver can call ``skb_clone_sk`` , save the clone pointer + in skb->cb and enqueue a tx skb queue. Typically, a switch will have a + PTP TX timestamp register (or sometimes a FIFO) where the timestamp + becomes available. In case of a FIFO, the hardware might store + key-value pairs of PTP sequence ID/message type/domain number and the + actual timestamp. To perform the correlation correctly between the + packets in a queue waiting for timestamping and the actual timestamps, + drivers can use a BPF classifier (``ptp_classify_raw``) to identify + the PTP transport type, and ``ptp_parse_header`` to interpret the PTP + header fields. There may be an IRQ that is raised upon this + timestamp's availability, or the driver might have to poll after + invoking ``dev_queue_xmit()`` towards the host interface. + One-step TX timestamping do not require packet cloning, since there is + no follow-up message required by the PTP protocol (because the + TX timestamp is embedded into the packet by the MAC), and therefore + user space does not expect the packet annotated with the TX timestamp + to be re-enqueued into its socket's error queue. + +- ``.port_rxtstamp()``: On RX, the BPF classifier is run by DSA to + identify PTP event messages (any other packets, including PTP general + messages, are not timestamped). The original (and only) timestampable + skb is provided to the driver, for it to annotate it with a timestamp, + if that is immediately available, or defer to later. On reception, + timestamps might either be available in-band (through metadata in the + DSA header, or attached in other ways to the packet), or out-of-band + (through another RX timestamping FIFO). Deferral on RX is typically + necessary when retrieving the timestamp needs a sleepable context. In + that case, it is the responsibility of the DSA driver to call + ``netif_rx()`` on the freshly timestamped skb. + +3.2.2 Ethernet PHYs +^^^^^^^^^^^^^^^^^^^ + +These are devices that typically fulfill a Layer 1 role in the network stack, +hence they do not have a representation in terms of a network interface as DSA +switches do. However, PHYs may be able to detect and timestamp PTP packets, for +performance reasons: timestamps taken as close as possible to the wire have the +potential to yield a more stable and precise synchronization. + +A PHY driver that supports PTP timestamping must create a ``struct +mii_timestamper`` and add a pointer to it in ``phydev->mii_ts``. The presence +of this pointer will be checked by the networking stack. + +Since PHYs do not have network interface representations, the timestamping and +ethtool ioctl operations for them need to be mediated by their respective MAC +driver. Therefore, as opposed to DSA switches, modifications need to be done +to each individual MAC driver for PHY timestamping support. This entails: + +- Checking, in ``.ndo_eth_ioctl``, whether ``phy_has_hwtstamp(netdev->phydev)`` + is true or not. If it is, then the MAC driver should not process this request + but instead pass it on to the PHY using ``phy_mii_ioctl()``. + +- On RX, special intervention may or may not be needed, depending on the + function used to deliver skb's up the network stack. In the case of plain + ``netif_rx()`` and similar, MAC drivers must check whether + ``skb_defer_rx_timestamp(skb)`` is necessary or not - and if it is, don't + call ``netif_rx()`` at all. If ``CONFIG_NETWORK_PHY_TIMESTAMPING`` is + enabled, and ``skb->dev->phydev->mii_ts`` exists, its ``.rxtstamp()`` hook + will be called now, to determine, using logic very similar to DSA, whether + deferral for RX timestamping is necessary. Again like DSA, it becomes the + responsibility of the PHY driver to send the packet up the stack when the + timestamp is available. + + For other skb receive functions, such as ``napi_gro_receive`` and + ``netif_receive_skb``, the stack automatically checks whether + ``skb_defer_rx_timestamp()`` is necessary, so this check is not needed inside + the driver. + +- On TX, again, special intervention might or might not be needed. The + function that calls the ``mii_ts->txtstamp()`` hook is named + ``skb_clone_tx_timestamp()``. This function can either be called directly + (case in which explicit MAC driver support is indeed needed), but the + function also piggybacks from the ``skb_tx_timestamp()`` call, which many MAC + drivers already perform for software timestamping purposes. Therefore, if a + MAC supports software timestamping, it does not need to do anything further + at this stage. + +3.2.3 MII bus snooping devices +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +These perform the same role as timestamping Ethernet PHYs, save for the fact +that they are discrete devices and can therefore be used in conjunction with +any PHY even if it doesn't support timestamping. In Linux, they are +discoverable and attachable to a ``struct phy_device`` through Device Tree, and +for the rest, they use the same mii_ts infrastructure as those. See +Documentation/devicetree/bindings/ptp/timestamper.txt for more details. + +3.2.4 Other caveats for MAC drivers +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Stacked PHCs, especially DSA (but not only) - since that doesn't require any +modification to MAC drivers, so it is more difficult to ensure correctness of +all possible code paths - is that they uncover bugs which were impossible to +trigger before the existence of stacked PTP clocks. One example has to do with +this line of code, already presented earlier:: + + skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; + +Any TX timestamping logic, be it a plain MAC driver, a DSA switch driver, a PHY +driver or a MII bus snooping device driver, should set this flag. +But a MAC driver that is unaware of PHC stacking might get tripped up by +somebody other than itself setting this flag, and deliver a duplicate +timestamp. +For example, a typical driver design for TX timestamping might be to split the +transmission part into 2 portions: + +1. "TX": checks whether PTP timestamping has been previously enabled through + the ``.ndo_eth_ioctl`` ("``priv->hwtstamp_tx_enabled == true``") and the + current skb requires a TX timestamp ("``skb_shinfo(skb)->tx_flags & + SKBTX_HW_TSTAMP``"). If this is true, it sets the + "``skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS``" flag. Note: as + described above, in the case of a stacked PHC system, this condition should + never trigger, as this MAC is certainly not the outermost PHC. But this is + not where the typical issue is. Transmission proceeds with this packet. + +2. "TX confirmation": Transmission has finished. The driver checks whether it + is necessary to collect any TX timestamp for it. Here is where the typical + issues are: the MAC driver takes a shortcut and only checks whether + "``skb_shinfo(skb)->tx_flags & SKBTX_IN_PROGRESS``" was set. With a stacked + PHC system, this is incorrect because this MAC driver is not the only entity + in the TX data path who could have enabled SKBTX_IN_PROGRESS in the first + place. + +The correct solution for this problem is for MAC drivers to have a compound +check in their "TX confirmation" portion, not only for +"``skb_shinfo(skb)->tx_flags & SKBTX_IN_PROGRESS``", but also for +"``priv->hwtstamp_tx_enabled == true``". Because the rest of the system ensures +that PTP timestamping is not enabled for anything other than the outermost PHC, +this enhanced check will avoid delivering a duplicated TX timestamp to user +space. -- cgit v1.2.3