From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- .../arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi | 322 +++++++++++++++++++++ 1 file changed, 322 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi (limited to 'arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi') diff --git a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi new file mode 100644 index 000000000..9ea289410 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi @@ -0,0 +1,322 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2020-2021 TQ-Systems GmbH + */ + +#include "imx8mn.dtsi" + +/ { + model = "TQ-Systems i.MX8MN TQMa8MxNL"; + compatible = "tq,imx8mn-tqma8mqnl", "fsl,imx8mn"; + + memory@40000000 { + device_type = "memory"; + /* our minimum RAM config will be 1024 MiB */ + reg = <0x00000000 0x40000000 0 0x40000000>; + }; + + /* e-MMC IO, needed for HS modes */ + reg_vcc1v8: regulator-vcc1v8 { + compatible = "regulator-fixed"; + regulator-name = "TQMA8MXNL_VCC1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_vcc3v3: regulator-vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "TQMA8MXNL_VCC3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* global autoconfigured region for contiguous allocations */ + linux,cma { + compatible = "shared-dma-pool"; + reusable; + /* 640 MiB */ + size = <0 0x28000000>; + /* 1024 - 128 MiB, our minimum RAM config will be 1024 MiB */ + alloc-ranges = <0 0x40000000 0 0x78000000>; + linux,cma-default; + }; + }; +}; + +&A53_0 { + cpu-supply = <&buck2_reg>; +}; + +&flexspi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexspi>; + status = "okay"; + + flash0: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <84000000>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + sensor0: temperature-sensor-eeprom@1b { + compatible = "nxp,se97", "jedec,jc-42.4-temp"; + reg = <0x1b>; + }; + + pca9450: pmic@25 { + compatible = "nxp,pca9450a"; + reg = <0x25>; + + /* PMIC PCA9450 PMIC_nINT GPIO1_IO08 */ + pinctrl-0 = <&pinctrl_pmic>; + pinctrl-names = "default"; + interrupt-parent = <&gpio1>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + + regulators { + /* V_0V85_SOC: 0.85 .. 0.95 */ + buck1_reg: BUCK1 { + regulator-name = "BUCK1"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <950000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + /* VDD_ARM */ + buck2_reg: BUCK2 { + regulator-name = "BUCK2"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + nxp,dvs-run-voltage = <950000>; + nxp,dvs-standby-voltage = <850000>; + regulator-ramp-delay = <3125>; + }; + + /* V_0V85_GPU / DRAM: shall be equal to BUCK1 for i.MX8MN */ + buck3_reg: BUCK3 { + regulator-name = "BUCK3"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <950000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + /* VCC3V3 -> VMMC, ... must not be changed */ + buck4_reg: BUCK4 { + regulator-name = "BUCK4"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + /* V_1V8 -> VQMMC, SPI-NOR, ... must not be changed */ + buck5_reg: BUCK5 { + regulator-name = "BUCK5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + /* V_1V1 -> RAM, ... must not be changed */ + buck6_reg: BUCK6 { + regulator-name = "BUCK6"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + /* V_1V8_SNVS */ + ldo1_reg: LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + /* V_0V8_SNVS */ + ldo2_reg: LDO2 { + regulator-name = "LDO2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + /* V_1V8_ANA */ + ldo3_reg: LDO3 { + regulator-name = "LDO3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + /* V_0V9_MIPI */ + ldo4_reg: LDO4 { + regulator-name = "LDO4"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VCC SD IO - switched using SD2 VSELECT */ + ldo5_reg: LDO5 { + regulator-name = "LDO5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; + + pcf85063: rtc@51 { + compatible = "nxp,pcf85063a"; + reg = <0x51>; + quartz-load-femtofarads = <7000>; + }; + + eeprom1: eeprom@53 { + compatible = "nxp,se97b", "atmel,24c02"; + read-only; + reg = <0x53>; + pagesize = <16>; + }; + + eeprom0: eeprom@57 { + compatible = "atmel,24c64"; + reg = <0x57>; + pagesize = <32>; + }; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + no-sd; + no-sdio; + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc1v8>; + status = "okay"; +}; + +/* + * Attention: + * wdog reset is routed to PMIC, PMIC must be preconfigured to force POR + * without LDO for SNVS. GPIO1_IO02 must not be used as GPIO. + */ +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_flexspi: flexspigrp { + fsl,pins = , + , + , + , + , + ; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = , + ; + }; + + pinctrl_i2c1_gpio: i2c1gpiogrp { + fsl,pins = , + ; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = ; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { + fsl,pins = ; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = , + , + , + , + , + , + , + , + , + , + , + ; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = , + , + , + , + , + , + , + , + , + , + , + ; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = , + , + , + , + , + , + , + , + , + , + , + ; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = ; + }; +}; -- cgit v1.2.3