From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- arch/arm64/boot/dts/qcom/Makefile | 161 + arch/arm64/boot/dts/qcom/apq8016-sbc.dts | 862 +++ .../apq8094-sony-xperia-kitakami-karin_windy.dts | 24 + arch/arm64/boot/dts/qcom/apq8096-db820c.dts | 1150 ++++ arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts | 402 ++ arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts | 90 + arch/arm64/boot/dts/qcom/ipq6018.dtsi | 817 +++ arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 115 + arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dts | 11 + arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dts | 10 + arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi | 71 + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 869 +++ .../boot/dts/qcom/msm8916-alcatel-idol347.dts | 318 + arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts | 321 + arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts | 496 ++ .../boot/dts/qcom/msm8916-longcheer-l8150.dts | 433 ++ .../boot/dts/qcom/msm8916-longcheer-l8910.dts | 268 + arch/arm64/boot/dts/qcom/msm8916-mtp.dts | 26 + arch/arm64/boot/dts/qcom/msm8916-pins.dtsi | 578 ++ arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi | 76 + .../dts/qcom/msm8916-samsung-a2015-common.dtsi | 482 ++ .../boot/dts/qcom/msm8916-samsung-a3u-eur.dts | 131 + .../boot/dts/qcom/msm8916-samsung-a5u-eur.dts | 72 + .../dts/qcom/msm8916-samsung-e2015-common.dtsi | 85 + arch/arm64/boot/dts/qcom/msm8916-samsung-e5.dts | 24 + arch/arm64/boot/dts/qcom/msm8916-samsung-e7.dts | 29 + .../boot/dts/qcom/msm8916-samsung-grandmax.dts | 60 + arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts | 209 + .../boot/dts/qcom/msm8916-samsung-serranove.dts | 544 ++ .../boot/dts/qcom/msm8916-wingtech-wt88047.dts | 314 + arch/arm64/boot/dts/qcom/msm8916.dtsi | 2111 +++++++ arch/arm64/boot/dts/qcom/msm8953.dtsi | 1329 +++++ .../boot/dts/qcom/msm8992-lg-bullhead-rev-10.dts | 15 + .../boot/dts/qcom/msm8992-lg-bullhead-rev-101.dts | 15 + arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi | 302 + .../qcom/msm8992-msft-lumia-octagon-talkman.dts | 16 + arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts | 429 ++ arch/arm64/boot/dts/qcom/msm8992.dtsi | 49 + .../dts/qcom/msm8994-huawei-angler-rev-101.dts | 64 + .../qcom/msm8994-msft-lumia-octagon-cityman.dts | 16 + .../boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi | 910 +++ .../dts/qcom/msm8994-sony-xperia-kitakami-ivy.dts | 27 + .../qcom/msm8994-sony-xperia-kitakami-karin.dts | 46 + .../qcom/msm8994-sony-xperia-kitakami-satsuki.dts | 19 + .../qcom/msm8994-sony-xperia-kitakami-sumire.dts | 16 + .../qcom/msm8994-sony-xperia-kitakami-suzuran.dts | 21 + .../dts/qcom/msm8994-sony-xperia-kitakami.dtsi | 492 ++ arch/arm64/boot/dts/qcom/msm8994.dtsi | 1110 ++++ arch/arm64/boot/dts/qcom/msm8996-mtp.dts | 33 + .../dts/qcom/msm8996-sony-xperia-tone-dora.dts | 28 + .../dts/qcom/msm8996-sony-xperia-tone-kagura.dts | 16 + .../dts/qcom/msm8996-sony-xperia-tone-keyaki.dts | 27 + .../boot/dts/qcom/msm8996-sony-xperia-tone.dtsi | 959 +++ arch/arm64/boot/dts/qcom/msm8996-v3.0.dtsi | 63 + .../arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi | 731 +++ arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts | 475 ++ .../arm64/boot/dts/qcom/msm8996-xiaomi-natrium.dts | 414 ++ .../arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts | 498 ++ arch/arm64/boot/dts/qcom/msm8996.dtsi | 3811 ++++++++++++ arch/arm64/boot/dts/qcom/msm8996pro.dtsi | 266 + .../boot/dts/qcom/msm8998-asus-novago-tp370ql.dts | 41 + arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi | 398 ++ arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts | 725 +++ arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dts | 32 + .../boot/dts/qcom/msm8998-lenovo-miix-630.dts | 37 + arch/arm64/boot/dts/qcom/msm8998-mtp.dts | 452 ++ .../boot/dts/qcom/msm8998-oneplus-cheeseburger.dts | 43 + .../boot/dts/qcom/msm8998-oneplus-common.dtsi | 576 ++ .../boot/dts/qcom/msm8998-oneplus-dumpling.dts | 26 + .../dts/qcom/msm8998-sony-xperia-yoshino-lilac.dts | 35 + .../dts/qcom/msm8998-sony-xperia-yoshino-maple.dts | 55 + .../qcom/msm8998-sony-xperia-yoshino-poplar.dts | 38 + .../boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi | 708 +++ arch/arm64/boot/dts/qcom/msm8998.dtsi | 2590 ++++++++ arch/arm64/boot/dts/qcom/pm6150.dtsi | 106 + arch/arm64/boot/dts/qcom/pm6150l.dtsi | 86 + arch/arm64/boot/dts/qcom/pm6350.dtsi | 56 + arch/arm64/boot/dts/qcom/pm660.dtsi | 194 + arch/arm64/boot/dts/qcom/pm660l.dtsi | 90 + arch/arm64/boot/dts/qcom/pm7250b.dtsi | 150 + arch/arm64/boot/dts/qcom/pm7325.dtsi | 53 + arch/arm64/boot/dts/qcom/pm8004.dtsi | 24 + arch/arm64/boot/dts/qcom/pm8005.dtsi | 36 + arch/arm64/boot/dts/qcom/pm8009.dtsi | 38 + arch/arm64/boot/dts/qcom/pm8150.dtsi | 146 + arch/arm64/boot/dts/qcom/pm8150b.dtsi | 141 + arch/arm64/boot/dts/qcom/pm8150l.dtsi | 130 + arch/arm64/boot/dts/qcom/pm8350.dtsi | 57 + arch/arm64/boot/dts/qcom/pm8350b.dtsi | 57 + arch/arm64/boot/dts/qcom/pm8350c.dtsi | 63 + arch/arm64/boot/dts/qcom/pm8450.dtsi | 59 + arch/arm64/boot/dts/qcom/pm8916.dtsi | 182 + arch/arm64/boot/dts/qcom/pm8953.dtsi | 90 + arch/arm64/boot/dts/qcom/pm8994.dtsi | 152 + arch/arm64/boot/dts/qcom/pm8998.dtsi | 122 + arch/arm64/boot/dts/qcom/pmi8994.dtsi | 65 + arch/arm64/boot/dts/qcom/pmi8996.dtsi | 15 + arch/arm64/boot/dts/qcom/pmi8998.dtsi | 66 + arch/arm64/boot/dts/qcom/pmk8350.dtsi | 74 + arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi | 135 + arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi | 108 + arch/arm64/boot/dts/qcom/pmr735a.dtsi | 57 + arch/arm64/boot/dts/qcom/pmr735b.dtsi | 57 + arch/arm64/boot/dts/qcom/pms405.dtsi | 140 + arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts | 12 + arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts | 94 + arch/arm64/boot/dts/qcom/qcs404-evb.dtsi | 396 ++ arch/arm64/boot/dts/qcom/qcs404.dtsi | 1659 ++++++ arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 1334 +++++ arch/arm64/boot/dts/qcom/sa8155p-adp.dts | 611 ++ arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 394 ++ arch/arm64/boot/dts/qcom/sa8540p.dtsi | 133 + arch/arm64/boot/dts/qcom/sc7180-idp.dts | 769 +++ arch/arm64/boot/dts/qcom/sc7180-lite.dtsi | 26 + .../boot/dts/qcom/sc7180-trogdor-coachz-r1-lte.dts | 18 + .../boot/dts/qcom/sc7180-trogdor-coachz-r1.dts | 171 + .../boot/dts/qcom/sc7180-trogdor-coachz-r3-lte.dts | 18 + .../boot/dts/qcom/sc7180-trogdor-coachz-r3.dts | 15 + .../arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi | 342 ++ .../boot/dts/qcom/sc7180-trogdor-homestar-r2.dts | 22 + .../boot/dts/qcom/sc7180-trogdor-homestar-r3.dts | 17 + .../boot/dts/qcom/sc7180-trogdor-homestar-r4.dts | 21 + .../boot/dts/qcom/sc7180-trogdor-homestar.dtsi | 354 ++ .../boot/dts/qcom/sc7180-trogdor-kingoftown-r0.dts | 44 + .../boot/dts/qcom/sc7180-trogdor-kingoftown-r1.dts | 17 + .../boot/dts/qcom/sc7180-trogdor-kingoftown.dtsi | 225 + .../qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dts | 34 + .../qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts | 31 + .../qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts | 28 + .../dts/qcom/sc7180-trogdor-lazor-limozeen-r4.dts | 46 + .../dts/qcom/sc7180-trogdor-lazor-limozeen-r9.dts | 44 + .../boot/dts/qcom/sc7180-trogdor-lazor-r0.dts | 34 + .../boot/dts/qcom/sc7180-trogdor-lazor-r1-kb.dts | 17 + .../boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts | 22 + .../boot/dts/qcom/sc7180-trogdor-lazor-r1.dts | 26 + .../boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts | 25 + .../boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts | 29 + .../boot/dts/qcom/sc7180-trogdor-lazor-r3.dts | 20 + .../boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts | 22 + .../boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts | 26 + .../boot/dts/qcom/sc7180-trogdor-lazor-r9.dts | 18 + arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi | 221 + .../boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi | 30 + .../dts/qcom/sc7180-trogdor-mrbland-rev0-auo.dts | 22 + .../dts/qcom/sc7180-trogdor-mrbland-rev0-boe.dts | 22 + .../boot/dts/qcom/sc7180-trogdor-mrbland-rev0.dtsi | 53 + .../dts/qcom/sc7180-trogdor-mrbland-rev1-auo.dts | 22 + .../dts/qcom/sc7180-trogdor-mrbland-rev1-boe.dts | 24 + .../boot/dts/qcom/sc7180-trogdor-mrbland.dtsi | 350 ++ .../dts/qcom/sc7180-trogdor-parade-ps8640.dtsi | 111 + .../dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts | 22 + .../dts/qcom/sc7180-trogdor-pazquel-lte-ti.dts | 22 + .../dts/qcom/sc7180-trogdor-pazquel-parade.dts | 17 + .../boot/dts/qcom/sc7180-trogdor-pazquel-ti.dts | 17 + .../boot/dts/qcom/sc7180-trogdor-pazquel.dtsi | 222 + .../boot/dts/qcom/sc7180-trogdor-pompom-r1-lte.dts | 14 + .../boot/dts/qcom/sc7180-trogdor-pompom-r1.dts | 43 + .../boot/dts/qcom/sc7180-trogdor-pompom-r2-lte.dts | 14 + .../boot/dts/qcom/sc7180-trogdor-pompom-r2.dts | 32 + .../boot/dts/qcom/sc7180-trogdor-pompom-r3-lte.dts | 14 + .../boot/dts/qcom/sc7180-trogdor-pompom-r3.dts | 15 + .../arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi | 326 + .../qcom/sc7180-trogdor-quackingstick-r0-lte.dts | 38 + .../dts/qcom/sc7180-trogdor-quackingstick-r0.dts | 26 + .../dts/qcom/sc7180-trogdor-quackingstick.dtsi | 324 + arch/arm64/boot/dts/qcom/sc7180-trogdor-r1-lte.dts | 14 + arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts | 201 + .../boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi | 91 + .../qcom/sc7180-trogdor-wormdingler-rev0-boe.dts | 22 + .../qcom/sc7180-trogdor-wormdingler-rev0-inx.dts | 22 + .../dts/qcom/sc7180-trogdor-wormdingler-rev0.dtsi | 53 + ...sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dts | 29 + .../qcom/sc7180-trogdor-wormdingler-rev1-boe.dts | 28 + ...sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dts | 29 + .../qcom/sc7180-trogdor-wormdingler-rev1-inx.dts | 22 + .../boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi | 412 ++ arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 1663 ++++++ arch/arm64/boot/dts/qcom/sc7180.dtsi | 4421 ++++++++++++++ arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi | 126 + arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts | 145 + .../dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi | 239 + arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts | 376 ++ .../boot/dts/qcom/sc7280-herobrine-evoker-r0.dts | 333 ++ .../dts/qcom/sc7280-herobrine-herobrine-r1.dts | 363 ++ .../boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi | 17 + .../boot/dts/qcom/sc7280-herobrine-villager-r0.dts | 16 + .../dts/qcom/sc7280-herobrine-villager-r1-lte.dts | 14 + .../boot/dts/qcom/sc7280-herobrine-villager-r1.dts | 43 + .../boot/dts/qcom/sc7280-herobrine-villager.dtsi | 326 + arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 897 +++ arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi | 105 + arch/arm64/boot/dts/qcom/sc7280-idp.dts | 102 + arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 853 +++ arch/arm64/boot/dts/qcom/sc7280-idp2.dts | 40 + arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi | 684 +++ arch/arm64/boot/dts/qcom/sc7280.dtsi | 6229 ++++++++++++++++++++ arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 440 ++ .../dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 408 ++ arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi | 109 + arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 2137 +++++++ .../arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts | 461 ++ .../dts/qcom/sdm630-sony-xperia-ganges-kirin.dts | 26 + .../dts/qcom/sdm630-sony-xperia-nile-discovery.dts | 15 + .../dts/qcom/sdm630-sony-xperia-nile-pioneer.dts | 15 + .../dts/qcom/sdm630-sony-xperia-nile-voyager.dts | 22 + .../boot/dts/qcom/sdm630-sony-xperia-nile.dtsi | 659 +++ arch/arm64/boot/dts/qcom/sdm630.dtsi | 2544 ++++++++ arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts | 183 + arch/arm64/boot/dts/qcom/sdm632.dtsi | 81 + .../dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts | 25 + arch/arm64/boot/dts/qcom/sdm636.dtsi | 23 + .../arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts | 420 ++ arch/arm64/boot/dts/qcom/sdm660.dtsi | 254 + arch/arm64/boot/dts/qcom/sdm845-cheza-r1.dts | 238 + arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dts | 238 + arch/arm64/boot/dts/qcom/sdm845-cheza-r3.dts | 174 + arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi | 1476 +++++ arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 1302 ++++ arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi | 614 ++ arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts | 68 + arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts | 44 + arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 788 +++ .../arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi | 672 +++ .../boot/dts/qcom/sdm845-oneplus-enchilada.dts | 34 + arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts | 38 + arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts | 765 +++ .../dts/qcom/sdm845-sony-xperia-tama-akari.dts | 13 + .../dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts | 30 + .../dts/qcom/sdm845-sony-xperia-tama-apollo.dts | 13 + .../boot/dts/qcom/sdm845-sony-xperia-tama.dtsi | 447 ++ .../boot/dts/qcom/sdm845-xiaomi-beryllium.dts | 594 ++ arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts | 761 +++ arch/arm64/boot/dts/qcom/sdm845.dtsi | 5671 ++++++++++++++++++ .../boot/dts/qcom/sdm850-lenovo-yoga-c630.dts | 823 +++ arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts | 750 +++ arch/arm64/boot/dts/qcom/sdm850.dtsi | 20 + .../dts/qcom/sm6125-sony-xperia-seine-pdx201.dts | 128 + arch/arm64/boot/dts/qcom/sm6125.dtsi | 658 +++ .../dts/qcom/sm6350-sony-xperia-lena-pdx213.dts | 58 + arch/arm64/boot/dts/qcom/sm6350.dtsi | 1645 ++++++ arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts | 485 ++ arch/arm64/boot/dts/qcom/sm7225.dtsi | 16 + arch/arm64/boot/dts/qcom/sm8150-hdk.dts | 469 ++ .../boot/dts/qcom/sm8150-microsoft-surface-duo.dts | 538 ++ arch/arm64/boot/dts/qcom/sm8150-mtp.dts | 450 ++ .../dts/qcom/sm8150-sony-xperia-kumano-bahamut.dts | 20 + .../dts/qcom/sm8150-sony-xperia-kumano-griffin.dts | 14 + .../boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi | 459 ++ arch/arm64/boot/dts/qcom/sm8150.dtsi | 4946 ++++++++++++++++ arch/arm64/boot/dts/qcom/sm8250-hdk.dts | 459 ++ arch/arm64/boot/dts/qcom/sm8250-mtp.dts | 904 +++ .../dts/qcom/sm8250-sony-xperia-edo-pdx203.dts | 249 + .../dts/qcom/sm8250-sony-xperia-edo-pdx206.dts | 279 + .../boot/dts/qcom/sm8250-sony-xperia-edo.dtsi | 713 +++ arch/arm64/boot/dts/qcom/sm8250.dtsi | 5795 ++++++++++++++++++ arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 332 ++ .../dts/qcom/sm8350-microsoft-surface-duo2.dts | 382 ++ arch/arm64/boot/dts/qcom/sm8350-mtp.dts | 382 ++ .../dts/qcom/sm8350-sony-xperia-sagami-pdx214.dts | 19 + .../dts/qcom/sm8350-sony-xperia-sagami-pdx215.dts | 13 + .../boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi | 259 + arch/arm64/boot/dts/qcom/sm8350.dtsi | 3438 +++++++++++ arch/arm64/boot/dts/qcom/sm8450-hdk.dts | 444 ++ arch/arm64/boot/dts/qcom/sm8450-qrd.dts | 450 ++ .../dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts | 632 ++ arch/arm64/boot/dts/qcom/sm8450.dtsi | 4119 +++++++++++++ 266 files changed, 111041 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/Makefile create mode 100644 arch/arm64/boot/dts/qcom/apq8016-sbc.dts create mode 100644 arch/arm64/boot/dts/qcom/apq8094-sony-xperia-kitakami-karin_windy.dts create mode 100644 arch/arm64/boot/dts/qcom/apq8096-db820c.dts create mode 100644 arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts create mode 100644 arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts create mode 100644 arch/arm64/boot/dts/qcom/ipq6018.dtsi create mode 100644 arch/arm64/boot/dts/qcom/ipq8074-hk01.dts create mode 100644 arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dts create mode 100644 arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dts create mode 100644 arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi create mode 100644 arch/arm64/boot/dts/qcom/ipq8074.dtsi create mode 100644 arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8916-mtp.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8916-pins.dtsi create mode 100644 arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi create mode 100644 arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi create mode 100644 arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi create mode 100644 arch/arm64/boot/dts/qcom/msm8916-samsung-e5.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8916-samsung-e7.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8916.dtsi create mode 100644 arch/arm64/boot/dts/qcom/msm8953.dtsi create mode 100644 arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-10.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-101.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi create mode 100644 arch/arm64/boot/dts/qcom/msm8992-msft-lumia-octagon-talkman.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8992.dtsi create mode 100644 arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi create mode 100644 arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-ivy.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-karin.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-satsuki.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-suzuran.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi create mode 100644 arch/arm64/boot/dts/qcom/msm8994.dtsi create mode 100644 arch/arm64/boot/dts/qcom/msm8996-mtp.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-kagura.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-keyaki.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi create mode 100644 arch/arm64/boot/dts/qcom/msm8996-v3.0.dtsi create mode 100644 arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi create mode 100644 arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8996-xiaomi-natrium.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8996.dtsi create mode 100644 arch/arm64/boot/dts/qcom/msm8996pro.dtsi create mode 100644 arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi create mode 100644 arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8998-mtp.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi create mode 100644 arch/arm64/boot/dts/qcom/msm8998-oneplus-dumpling.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-lilac.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-poplar.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi create mode 100644 arch/arm64/boot/dts/qcom/msm8998.dtsi create mode 100644 arch/arm64/boot/dts/qcom/pm6150.dtsi create mode 100644 arch/arm64/boot/dts/qcom/pm6150l.dtsi create mode 100644 arch/arm64/boot/dts/qcom/pm6350.dtsi create mode 100644 arch/arm64/boot/dts/qcom/pm660.dtsi create mode 100644 arch/arm64/boot/dts/qcom/pm660l.dtsi create mode 100644 arch/arm64/boot/dts/qcom/pm7250b.dtsi create mode 100644 arch/arm64/boot/dts/qcom/pm7325.dtsi create mode 100644 arch/arm64/boot/dts/qcom/pm8004.dtsi create mode 100644 arch/arm64/boot/dts/qcom/pm8005.dtsi create mode 100644 arch/arm64/boot/dts/qcom/pm8009.dtsi create mode 100644 arch/arm64/boot/dts/qcom/pm8150.dtsi create mode 100644 arch/arm64/boot/dts/qcom/pm8150b.dtsi create mode 100644 arch/arm64/boot/dts/qcom/pm8150l.dtsi create mode 100644 arch/arm64/boot/dts/qcom/pm8350.dtsi create mode 100644 arch/arm64/boot/dts/qcom/pm8350b.dtsi create mode 100644 arch/arm64/boot/dts/qcom/pm8350c.dtsi create mode 100644 arch/arm64/boot/dts/qcom/pm8450.dtsi create mode 100644 arch/arm64/boot/dts/qcom/pm8916.dtsi create mode 100644 arch/arm64/boot/dts/qcom/pm8953.dtsi create mode 100644 arch/arm64/boot/dts/qcom/pm8994.dtsi create mode 100644 arch/arm64/boot/dts/qcom/pm8998.dtsi create mode 100644 arch/arm64/boot/dts/qcom/pmi8994.dtsi create mode 100644 arch/arm64/boot/dts/qcom/pmi8996.dtsi create mode 100644 arch/arm64/boot/dts/qcom/pmi8998.dtsi create mode 100644 arch/arm64/boot/dts/qcom/pmk8350.dtsi create mode 100644 arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi create mode 100644 arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi create mode 100644 arch/arm64/boot/dts/qcom/pmr735a.dtsi create mode 100644 arch/arm64/boot/dts/qcom/pmr735b.dtsi create mode 100644 arch/arm64/boot/dts/qcom/pms405.dtsi create mode 100644 arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts create mode 100644 arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts create mode 100644 arch/arm64/boot/dts/qcom/qcs404-evb.dtsi create mode 100644 arch/arm64/boot/dts/qcom/qcs404.dtsi create mode 100644 arch/arm64/boot/dts/qcom/qrb5165-rb5.dts create mode 100644 arch/arm64/boot/dts/qcom/sa8155p-adp.dts create mode 100644 arch/arm64/boot/dts/qcom/sa8295p-adp.dts create mode 100644 arch/arm64/boot/dts/qcom/sa8540p.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sc7180-idp.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-lite.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1-lte.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3-lte.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r2.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r3.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r4.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r0.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r1.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r4.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r9.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-kb.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-auo.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-boe.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-auo.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-boe.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-ti.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-parade.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-ti.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1-lte.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2-lte.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3-lte.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0-lte.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-r1-lte.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-boe.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-inx.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sc7180.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-r0.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sc7280-idp.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7280-idp.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sc7280-idp2.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sc7280.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sc8280xp-crd.dts create mode 100644 arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts create mode 100644 arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sc8280xp.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts create mode 100644 arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts create mode 100644 arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts create mode 100644 arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts create mode 100644 arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts create mode 100644 arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sdm630.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts create mode 100644 arch/arm64/boot/dts/qcom/sdm632.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts create mode 100644 arch/arm64/boot/dts/qcom/sdm636.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts create mode 100644 arch/arm64/boot/dts/qcom/sdm660.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sdm845-cheza-r1.dts create mode 100644 arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dts create mode 100644 arch/arm64/boot/dts/qcom/sdm845-cheza-r3.dts create mode 100644 arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sdm845-db845c.dts create mode 100644 arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts create mode 100644 arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts create mode 100644 arch/arm64/boot/dts/qcom/sdm845-mtp.dts create mode 100644 arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts create mode 100644 arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts create mode 100644 arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts create mode 100644 arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts create mode 100644 arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts create mode 100644 arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts create mode 100644 arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts create mode 100644 arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts create mode 100644 arch/arm64/boot/dts/qcom/sdm845.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts create mode 100644 arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts create mode 100644 arch/arm64/boot/dts/qcom/sdm850.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts create mode 100644 arch/arm64/boot/dts/qcom/sm6125.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts create mode 100644 arch/arm64/boot/dts/qcom/sm6350.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts create mode 100644 arch/arm64/boot/dts/qcom/sm7225.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sm8150-hdk.dts create mode 100644 arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts create mode 100644 arch/arm64/boot/dts/qcom/sm8150-mtp.dts create mode 100644 arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-bahamut.dts create mode 100644 arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-griffin.dts create mode 100644 arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sm8150.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sm8250-hdk.dts create mode 100644 arch/arm64/boot/dts/qcom/sm8250-mtp.dts create mode 100644 arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts create mode 100644 arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts create mode 100644 arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sm8250.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sm8350-hdk.dts create mode 100644 arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts create mode 100644 arch/arm64/boot/dts/qcom/sm8350-mtp.dts create mode 100644 arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx214.dts create mode 100644 arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx215.dts create mode 100644 arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sm8350.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sm8450-hdk.dts create mode 100644 arch/arm64/boot/dts/qcom/sm8450-qrd.dts create mode 100644 arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts create mode 100644 arch/arm64/boot/dts/qcom/sm8450.dtsi (limited to 'arch/arm64/boot/dts/qcom') diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile new file mode 100644 index 000000000..d7669a7ce --- /dev/null +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -0,0 +1,161 @@ +# SPDX-License-Identifier: GPL-2.0 +dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb +dtb-$(CONFIG_ARCH_QCOM) += apq8094-sony-xperia-kitakami-karin_windy.dtb +dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb +dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-huawei-g7.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8150.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8910.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a3u-eur.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a5u-eur.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-e5.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-e7.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-grandmax.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-j5.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-serranove.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8992-lg-bullhead-rev-10.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8992-lg-bullhead-rev-101.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8992-msft-lumia-octagon-talkman.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8992-xiaomi-libra.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8994-huawei-angler-rev-101.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8994-msft-lumia-octagon-cityman.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-ivy.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-karin.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-satsuki.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-sumire.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-suzuran.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-dora.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-kagura.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-keyaki.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8996-xiaomi-gemini.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8996-xiaomi-natrium.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8996-xiaomi-scorpio.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8998-asus-novago-tp370ql.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8998-fxtec-pro1.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8998-hp-envy-x2.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8998-lenovo-miix-630.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8998-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8998-oneplus-cheeseburger.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8998-oneplus-dumpling.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-lilac.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-maple.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-poplar.dtb +dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb +dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb +dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb +dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb +dtb-$(CONFIG_ARCH_QCOM) += sa8295p-adp.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1-lte.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r3.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r3-lte.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-homestar-r2.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-homestar-r3.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-homestar-r4.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-kingoftown-r0.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-kingoftown-r1.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r0.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1-kb.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1-lte.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r3.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r3-kb.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r3-lte.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r9.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r9-kb.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r9-lte.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-r4.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-r9.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots-r4.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots-r5.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots-r9.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev0-auo.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev0-boe.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev1-auo.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev1-boe.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-lte-parade.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-lte-ti.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-parade.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-ti.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r1.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r1-lte.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r2.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r2-lte.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r3.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r3-lte.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-quackingstick-r0.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-quackingstick-r0-lte.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev0-boe.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev0-inx.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev1-boe.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev1-inx.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1-lte.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-crd.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-evoker-r0.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-herobrine-r1.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r0.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r1.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r1-lte.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp2.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7280-crd-r3.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-crd.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-lenovo-thinkpad-x13s.dtb +dtb-$(CONFIG_ARCH_QCOM) += sda660-inforce-ifc6560.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-ganges-kirin.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-discovery.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-pioneer.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-voyager.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm632-fairphone-fp3.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm636-sony-xperia-ganges-mermaid.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm660-xiaomi-lavender.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r1.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r2.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r3.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-db845c.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-lg-judyln.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-lg-judyp.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-oneplus-enchilada.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-oneplus-fajita.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-sony-xperia-tama-akari.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-sony-xperia-tama-akatsuki.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-sony-xperia-tama-apollo.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-polaris.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-shift-axolotl.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm850-samsung-w737.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm6350-sony-xperia-lena-pdx213.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm7225-fairphone-fp4.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8150-hdk.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8150-microsoft-surface-duo.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8150-sony-xperia-kumano-bahamut.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8150-sony-xperia-kumano-griffin.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8250-hdk.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8250-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx203.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx206.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8350-hdk.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8350-microsoft-surface-duo2.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8350-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8350-sony-xperia-sagami-pdx214.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8350-sony-xperia-sagami-pdx215.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8450-hdk.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8450-qrd.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx223.dtb diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts new file mode 100644 index 000000000..9d116e1fb --- /dev/null +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts @@ -0,0 +1,862 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include "msm8916-pm8916.dtsi" +#include +#include +#include +#include +#include +#include + +/ { + model = "Qualcomm Technologies, Inc. APQ 8016 SBC"; + compatible = "qcom,apq8016-sbc", "qcom,apq8016"; + + aliases { + serial0 = &blsp1_uart2; + serial1 = &blsp1_uart1; + usid0 = &pm8916_0; + i2c0 = &blsp_i2c2; + i2c1 = &blsp_i2c6; + i2c3 = &blsp_i2c4; + spi0 = &blsp_spi5; + spi1 = &blsp_spi3; + }; + + chosen { + stdout-path = "serial0"; + }; + + camera_vdddo_1v8: camera-vdddo-1v8 { + compatible = "regulator-fixed"; + regulator-name = "camera_vdddo"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + camera_vdda_2v8: camera-vdda-2v8 { + compatible = "regulator-fixed"; + regulator-name = "camera_vdda"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + camera_vddd_1v5: camera-vddd-1v5 { + compatible = "regulator-fixed"; + regulator-name = "camera_vddd"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + + reserved-memory { + ramoops@bff00000 { + compatible = "ramoops"; + reg = <0x0 0xbff00000 0x0 0x100000>; + + record-size = <0x20000>; + console-size = <0x20000>; + ftrace-size = <0x20000>; + }; + }; + + usb2513 { + compatible = "smsc,usb3503"; + reset-gpios = <&pm8916_gpios 3 GPIO_ACTIVE_LOW>; + initial-mode = <1>; + }; + + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_id_default>; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&adv7533_out>; + }; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&msm_key_volp_n_default>; + + button { + label = "Volume Up"; + linux,code = ; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + pinctrl-names = "default"; + pinctrl-0 = <&msmgpio_leds>, + <&pm8916_gpios_leds>, + <&pm8916_mpps_leds>; + + compatible = "gpio-leds"; + + led@1 { + label = "apq8016-sbc:green:user1"; + function = LED_FUNCTION_HEARTBEAT; + color = ; + gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led@2 { + label = "apq8016-sbc:green:user2"; + function = LED_FUNCTION_DISK_ACTIVITY; + color = ; + gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led@3 { + label = "apq8016-sbc:green:user3"; + function = LED_FUNCTION_DISK_ACTIVITY; + color = ; + gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + default-state = "off"; + }; + + led@4 { + label = "apq8016-sbc:green:user4"; + color = ; + gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + panic-indicator; + default-state = "off"; + }; + + led@5 { + label = "apq8016-sbc:yellow:wlan"; + function = LED_FUNCTION_WLAN; + color = ; + gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + + led@6 { + label = "apq8016-sbc:blue:bt"; + function = LED_FUNCTION_BLUETOOTH; + color = ; + gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "bluetooth-power"; + default-state = "off"; + }; + }; +}; + +&blsp_dma { + status = "okay"; +}; + +&blsp_i2c2 { + /* On Low speed expansion */ + status = "okay"; + label = "LS-I2C0"; +}; + +&blsp_i2c4 { + /* On High speed expansion */ + status = "okay"; + label = "HS-I2C2"; + + adv_bridge: bridge@39 { + status = "okay"; + + compatible = "adi,adv7533"; + reg = <0x39>; + + interrupt-parent = <&msmgpio>; + interrupts = <31 IRQ_TYPE_EDGE_FALLING>; + + adi,dsi-lanes = <4>; + clocks = <&rpmcc RPM_SMD_BB_CLK2>; + clock-names = "cec"; + + pd-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>; + + avdd-supply = <&pm8916_l6>; + a2vdd-supply = <&pm8916_l6>; + dvdd-supply = <&pm8916_l6>; + pvdd-supply = <&pm8916_l6>; + v1p2-supply = <&pm8916_l6>; + v3p3-supply = <&pm8916_l17>; + + pinctrl-names = "default","sleep"; + pinctrl-0 = <&adv7533_int_active &adv7533_switch_active>; + pinctrl-1 = <&adv7533_int_suspend &adv7533_switch_suspend>; + #sound-dai-cells = <1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7533_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + adv7533_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; +}; + +&blsp_i2c6 { + /* On Low speed expansion */ + status = "okay"; + label = "LS-I2C1"; +}; + +&blsp_spi3 { + /* On High speed expansion */ + status = "okay"; + label = "HS-SPI1"; +}; + +&blsp_spi5 { + /* On Low speed expansion */ + status = "okay"; + label = "LS-SPI0"; +}; + +&blsp1_uart1 { + status = "okay"; + label = "LS-UART0"; +}; + +&blsp1_uart2 { + status = "okay"; + label = "LS-UART1"; +}; + +&camss { + status = "okay"; + ports { + port@0 { + reg = <0>; + csiphy0_ep: endpoint { + data-lanes = <0 2>; + remote-endpoint = <&ov5640_ep>; + status = "okay"; + }; + }; + }; +}; + +&cci { + status = "okay"; +}; + +&cci_i2c0 { + camera_rear@3b { + compatible = "ovti,ov5640"; + reg = <0x3b>; + + enable-gpios = <&msmgpio 34 GPIO_ACTIVE_HIGH>; + reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&camera_rear_default>; + + clocks = <&gcc GCC_CAMSS_MCLK0_CLK>; + clock-names = "xclk"; + clock-frequency = <23880000>; + + DOVDD-supply = <&camera_vdddo_1v8>; + AVDD-supply = <&camera_vdda_2v8>; + DVDD-supply = <&camera_vddd_1v5>; + + /* No camera mezzanine by default */ + status = "disabled"; + + port { + ov5640_ep: endpoint { + data-lanes = <0 2>; + remote-endpoint = <&csiphy0_ep>; + }; + }; + }; +}; + +&dsi0_out { + data-lanes = <0 1 2 3>; + remote-endpoint = <&adv7533_in>; +}; + +&lpass { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mpss { + status = "okay"; + + firmware-name = "qcom/apq8016/mba.mbn", "qcom/apq8016/modem.mbn"; +}; + +&pm8916_resin { + status = "okay"; + linux,code = ; +}; + +&pronto { + status = "okay"; + + firmware-name = "qcom/apq8016/wcnss.mbn"; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; +}; + +&sound { + status = "okay"; + + pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>; + pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>; + pinctrl-names = "default", "sleep"; + model = "DB410c"; + audio-routing = + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS External1"; + + quaternary-dai-link { + link-name = "ADV7533"; + cpu { + sound-dai = <&lpass MI2S_QUATERNARY>; + }; + codec { + sound-dai = <&adv_bridge 0>; + }; + }; + + primary-dai-link { + link-name = "WCD"; + cpu { + sound-dai = <&lpass MI2S_PRIMARY>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; + }; + }; + + tertiary-dai-link { + link-name = "WCD-Capture"; + cpu { + sound-dai = <&lpass MI2S_TERTIARY>; + }; + codec { + sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; + }; + }; +}; + +&usb { + status = "okay"; + extcon = <&usb_id>, <&usb_id>; + + pinctrl-names = "default", "device"; + pinctrl-0 = <&usb_sw_sel_pm &usb_hub_reset_pm>; + pinctrl-1 = <&usb_sw_sel_pm_device &usb_hub_reset_pm_device>; +}; + +&usb_hs_phy { + extcon = <&usb_id>; +}; + +&wcd_codec { + clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>; + clock-names = "mclk"; + qcom,mbhc-vthreshold-low = <75 150 237 450 500>; + qcom,mbhc-vthreshold-high = <75 150 237 450 500>; +}; + +&wcnss_ctrl { + firmware-name = "qcom/apq8016/WCNSS_qcom_wlan_nv_sbc.bin"; +}; + +/* Enable CoreSight */ +&cti0 { status = "okay"; }; +&cti1 { status = "okay"; }; +&cti12 { status = "okay"; }; +&cti13 { status = "okay"; }; +&cti14 { status = "okay"; }; +&cti15 { status = "okay"; }; +&debug0 { status = "okay"; }; +&debug1 { status = "okay"; }; +&debug2 { status = "okay"; }; +&debug3 { status = "okay"; }; +&etf { status = "okay"; }; +&etm0 { status = "okay"; }; +&etm1 { status = "okay"; }; +&etm2 { status = "okay"; }; +&etm3 { status = "okay"; }; +&etr { status = "okay"; }; +&funnel0 { status = "okay"; }; +&funnel1 { status = "okay"; }; +&replicator { status = "okay"; }; +&stm { status = "okay"; }; +&tpiu { status = "okay"; }; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s3 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1350000>; + }; + + s4 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <2150000>; + + regulator-always-on; + regulator-boot-on; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + l11 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + /* + * The 96Boards specification expects a 1.8V power rail on the low-speed + * expansion connector that is able to provide at least 0.18W / 100 mA. + * L15/L16 are connected in parallel to provide 55 mA each. A minimum load + * must be specified to ensure the regulators are not put in LPM where they + * would only provide 5 mA. + */ + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-system-load = <50000>; + regulator-allow-set-load; + regulator-always-on; + }; + + l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-system-load = <50000>; + regulator-allow-set-load; + regulator-always-on; + }; + + l17 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +/* + * 2mA drive strength is not enough when connecting multiple + * I2C devices with different pull up resistors. + */ +&i2c2_default { + drive-strength = <16>; +}; + +&i2c4_default { + drive-strength = <16>; +}; + +&i2c6_default { + drive-strength = <16>; +}; + +/* + * GPIO name legend: proper name = the GPIO line is used as GPIO + * NC = not connected (pin out but not routed from the chip to + * anything the board) + * "[PER]" = pin is muxed for [peripheral] (not GPIO) + * LSEC = Low Speed External Connector + * HSEC = High Speed External Connector + * + * Line names are taken from the schematic "DragonBoard410c" + * dated monday, august 31, 2015. Page 5 in particular. + * + * For the lines routed to the external connectors the + * lines are named after the 96Boards CE Specification 1.0, + * Appendix "Expansion Connector Signal Description". + * + * When the 96Board naming of a line and the schematic name of + * the same line are in conflict, the 96Board specification + * takes precedence, which means that the external UART on the + * LSEC is named UART0 while the schematic and SoC names this + * UART3. This is only for the informational lines i.e. "[FOO]", + * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only + * ones actually used for GPIO. + */ + +&msmgpio { + gpio-line-names = + "[UART0_TX]", /* GPIO_0, LSEC pin 5 */ + "[UART0_RX]", /* GPIO_1, LSEC pin 7 */ + "[UART0_CTS_N]", /* GPIO_2, LSEC pin 3 */ + "[UART0_RTS_N]", /* GPIO_3, LSEC pin 9 */ + "[UART1_TX]", /* GPIO_4, LSEC pin 11 */ + "[UART1_RX]", /* GPIO_5, LSEC pin 13 */ + "[I2C0_SDA]", /* GPIO_8, LSEC pin 17 */ + "[I2C0_SCL]", /* GPIO_7, LSEC pin 15 */ + "[SPI1_DOUT]", /* SPI1_MOSI, HSEC pin 1 */ + "[SPI1_DIN]", /* SPI1_MISO, HSEC pin 11 */ + "[SPI1_CS]", /* SPI1_CS_N, HSEC pin 7 */ + "[SPI1_SCLK]", /* SPI1_CLK, HSEC pin 9 */ + "GPIO-B", /* LS_EXP_GPIO_B, LSEC pin 24 */ + "GPIO-C", /* LS_EXP_GPIO_C, LSEC pin 25 */ + "[I2C3_SDA]", /* HSEC pin 38 */ + "[I2C3_SCL]", /* HSEC pin 36 */ + "[SPI0_MOSI]", /* LSEC pin 14 */ + "[SPI0_MISO]", /* LSEC pin 10 */ + "[SPI0_CS_N]", /* LSEC pin 12 */ + "[SPI0_CLK]", /* LSEC pin 8 */ + "HDMI_HPD_N", /* GPIO 20 */ + "USR_LED_1_CTRL", + "[I2C1_SDA]", /* GPIO_22, LSEC pin 21 */ + "[I2C1_SCL]", /* GPIO_23, LSEC pin 19 */ + "GPIO-G", /* LS_EXP_GPIO_G, LSEC pin 29 */ + "GPIO-H", /* LS_EXP_GPIO_H, LSEC pin 30 */ + "[CSI0_MCLK]", /* HSEC pin 15 */ + "[CSI1_MCLK]", /* HSEC pin 17 */ + "GPIO-K", /* LS_EXP_GPIO_K, LSEC pin 33 */ + "[I2C2_SDA]", /* HSEC pin 34 */ + "[I2C2_SCL]", /* HSEC pin 32 */ + "DSI2HDMI_INT_N", + "DSI_SW_SEL_APQ", + "GPIO-L", /* LS_EXP_GPIO_L, LSEC pin 34 */ + "GPIO-J", /* LS_EXP_GPIO_J, LSEC pin 32 */ + "GPIO-I", /* LS_EXP_GPIO_I, LSEC pin 31 */ + "GPIO-A", /* LS_EXP_GPIO_A, LSEC pin 23 */ + "FORCED_USB_BOOT", + "SD_CARD_DET_N", + "[WCSS_BT_SSBI]", + "[WCSS_WLAN_DATA_2]", /* GPIO 40 */ + "[WCSS_WLAN_DATA_1]", + "[WCSS_WLAN_DATA_0]", + "[WCSS_WLAN_SET]", + "[WCSS_WLAN_CLK]", + "[WCSS_FM_SSBI]", + "[WCSS_FM_SDI]", + "[WCSS_BT_DAT_CTL]", + "[WCSS_BT_DAT_STB]", + "NC", + "NC", /* GPIO 50 */ + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", /* GPIO 60 */ + "NC", + "NC", + "[CDC_PDM0_CLK]", + "[CDC_PDM0_SYNC]", + "[CDC_PDM0_TX0]", + "[CDC_PDM0_RX0]", + "[CDC_PDM0_RX1]", + "[CDC_PDM0_RX2]", + "GPIO-D", /* LS_EXP_GPIO_D, LSEC pin 26 */ + "NC", /* GPIO 70 */ + "NC", + "NC", + "NC", + "NC", /* GPIO 74 */ + "NC", + "NC", + "NC", + "NC", + "NC", + "BOOT_CONFIG_0", /* GPIO 80 */ + "BOOT_CONFIG_1", + "BOOT_CONFIG_2", + "BOOT_CONFIG_3", + "NC", + "NC", + "BOOT_CONFIG_5", + "NC", + "NC", + "NC", + "NC", /* GPIO 90 */ + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", /* GPIO 100 */ + "NC", + "NC", + "NC", + "SSBI_GPS", + "NC", + "NC", + "KEY_VOLP_N", + "NC", + "NC", + "[LS_EXP_MI2S_WS]", /* GPIO 110 */ + "NC", + "NC", + "[LS_EXP_MI2S_SCK]", + "[LS_EXP_MI2S_DATA0]", + "GPIO-E", /* LS_EXP_GPIO_E, LSEC pin 27 */ + "NC", + "[DSI2HDMI_MI2S_WS]", + "[DSI2HDMI_MI2S_SCK]", + "[DSI2HDMI_MI2S_DATA0]", + "USR_LED_2_CTRL", /* GPIO 120 */ + "SB_HS_ID"; + + msmgpio_leds: msmgpio-leds { + pins = "gpio21", "gpio120"; + function = "gpio"; + + output-low; + }; + + usb_id_default: usb-id-default { + pins = "gpio121"; + function = "gpio"; + + drive-strength = <8>; + input-enable; + bias-pull-up; + }; + + adv7533_int_active: adv533-int-active { + pins = "gpio31"; + function = "gpio"; + + drive-strength = <16>; + bias-disable; + }; + + adv7533_int_suspend: adv7533-int-suspend { + pins = "gpio31"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + adv7533_switch_active: adv7533-switch-active { + pins = "gpio32"; + function = "gpio"; + + drive-strength = <16>; + bias-disable; + }; + + adv7533_switch_suspend: adv7533-switch-suspend { + pins = "gpio32"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + msm_key_volp_n_default: msm-key-volp-n-default { + pins = "gpio107"; + function = "gpio"; + + drive-strength = <8>; + input-enable; + bias-pull-up; + }; +}; + +&pm8916_gpios { + gpio-line-names = + "USR_LED_3_CTRL", + "USR_LED_4_CTRL", + "USB_HUB_RESET_N_PM", + "USB_SW_SEL_PM"; + + usb_hub_reset_pm: usb-hub-reset-pm-state { + pins = "gpio3"; + function = PMIC_GPIO_FUNC_NORMAL; + + input-disable; + output-high; + }; + + usb_hub_reset_pm_device: usb-hub-reset-pm-device-state { + pins = "gpio3"; + function = PMIC_GPIO_FUNC_NORMAL; + + output-low; + }; + + usb_sw_sel_pm: usb-sw-sel-pm-state { + pins = "gpio4"; + function = PMIC_GPIO_FUNC_NORMAL; + + power-source = ; + input-disable; + output-high; + }; + + usb_sw_sel_pm_device: usb-sw-sel-pm-device-state { + pins = "gpio4"; + function = PMIC_GPIO_FUNC_NORMAL; + + power-source = ; + input-disable; + output-low; + }; + + pm8916_gpios_leds: pm8916-gpios-leds-state { + pins = "gpio1", "gpio2"; + function = PMIC_GPIO_FUNC_NORMAL; + + output-low; + }; +}; + +&pm8916_mpps { + gpio-line-names = + "VDD_PX_BIAS", + "WLAN_LED_CTRL", + "BT_LED_CTRL", + "GPIO-F"; /* LS_EXP_GPIO_F, LSEC pin 28 */ + + pinctrl-names = "default"; + pinctrl-0 = <&ls_exp_gpio_f>; + + ls_exp_gpio_f: pm8916-mpp4-state { + pins = "mpp4"; + function = "digital"; + + output-low; + power-source = ; // 1.8V + }; + + pm8916_mpps_leds: pm8916-mpps-state { + pins = "mpp2", "mpp3"; + function = "digital"; + + output-low; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/apq8094-sony-xperia-kitakami-karin_windy.dts b/arch/arm64/boot/dts/qcom/apq8094-sony-xperia-kitakami-karin_windy.dts new file mode 100644 index 000000000..314d2dc47 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/apq8094-sony-xperia-kitakami-karin_windy.dts @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio + */ + +/dts-v1/; + +/* As the names may imply, there is quite a bunch of duplication there. */ +#include "msm8994-sony-xperia-kitakami-karin.dts" + +/ { + model = "Sony Xperia Z4 Tablet (Wi-Fi)"; + compatible = "sony,karin_windy", "qcom,apq8094"; + chassis-type = "tablet"; + + /* + * This model uses the APQ variant of MSM8994 (APQ8094). + * The v1/v2/v2.1 story (from kitakami.dtsi) also applies here. + */ + qcom,msm-id = <253 0x20000>, <253 0x20001>; +}; + +/delete-node/ &pm8994_l1; +/delete-node/ &pm8994_l19; diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts new file mode 100644 index 000000000..c7de5e3b0 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts @@ -0,0 +1,1150 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2014-2016, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include "msm8996.dtsi" +#include "pm8994.dtsi" +#include "pmi8994.dtsi" +#include +#include +#include +#include +#include +#include +#include + +/* + * GPIO name legend: proper name = the GPIO line is used as GPIO + * NC = not connected (pin out but not routed from the chip to + * anything the board) + * "[PER]" = pin is muxed for [peripheral] (not GPIO) + * LSEC = Low Speed External Connector + * P HSEC = Primary High Speed External Connector + * S HSEC = Secondary High Speed External Connector + * J14 = Camera Connector + * TP = Test Points + * + * Line names are taken from the schematic "DragonBoard 820c", + * drawing no: LM25-P2751-1 + * + * For the lines routed to the external connectors the + * lines are named after the 96Boards CE Specification 1.0, + * Appendix "Expansion Connector Signal Description". + * + * When the 96Board naming of a line and the schematic name of + * the same line are in conflict, the 96Board specification + * takes precedence, which means that the external UART on the + * LSEC is named UART0 while the schematic and SoC names this + * UART3. This is only for the informational lines i.e. "[FOO]", + * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only + * ones actually used for GPIO. + */ + +/ { + model = "Qualcomm Technologies, Inc. DB820c"; + compatible = "arrow,apq8096-db820c", "qcom,apq8096-sbc", "qcom,apq8096"; + + aliases { + serial0 = &blsp2_uart2; + serial1 = &blsp2_uart3; + serial2 = &blsp1_uart2; + i2c0 = &blsp1_i2c3; + i2c1 = &blsp2_i2c1; + i2c2 = &blsp2_i2c1; + spi0 = &blsp1_spi1; + spi1 = &blsp2_spi6; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + clocks { + compatible = "simple-bus"; + divclk4: divclk4 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "divclk4"; + + pinctrl-names = "default"; + pinctrl-0 = <&divclk4_pin_a>; + }; + + div1_mclk: divclk1 { + compatible = "gpio-gate-clock"; + pinctrl-0 = <&audio_mclk>; + pinctrl-names = "default"; + clocks = <&rpmcc RPM_SMD_DIV_CLK1>; + #clock-cells = <0>; + enable-gpios = <&pm8994_gpios 15 0>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&volume_up_gpio>; + + button { + label = "Volume Up"; + linux,code = ; + gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>; + }; + }; + + usb2_id: usb2-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb2_vbus_det_gpio>; + }; + + usb3_id: usb3-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb3_vbus_det_gpio>; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + wlan_en: wlan-en-1-8v { + pinctrl-names = "default"; + pinctrl-0 = <&wlan_en_gpios>; + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&pm8994_gpios 8 0>; + + /* WLAN card specific delay */ + startup-delay-us = <70000>; + enable-active-high; + }; +}; + +&blsp1_i2c3 { + /* On Low speed expansion */ + label = "LS-I2C0"; + status = "okay"; +}; + +&blsp1_spi1 { + /* On Low speed expansion */ + label = "LS-SPI0"; + status = "okay"; +}; + +&blsp1_uart2 { + label = "BT-UART"; + status = "okay"; + + bluetooth { + compatible = "qcom,qca6174-bt"; + + /* bt_disable_n gpio */ + enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; + + clocks = <&divclk4>; + }; +}; + +&adsp_pil { + status = "okay"; + firmware-name = "qcom/apq8096/adsp.mbn"; +}; + +&blsp2_i2c1 { + /* On High speed expansion */ + label = "HS-I2C2"; + status = "okay"; +}; + +&blsp2_i2c1 { + /* On Low speed expansion */ + label = "LS-I2C1"; + status = "okay"; +}; + +&blsp2_spi6 { + /* On High speed expansion */ + label = "HS-SPI1"; + status = "okay"; +}; + +&blsp2_uart2 { + label = "LS-UART1"; + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_uart2_2pins_default>; + pinctrl-1 = <&blsp2_uart2_2pins_sleep>; +}; + +&blsp2_uart3 { + label = "LS-UART0"; + status = "disabled"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_uart3_4pins_default>; + pinctrl-1 = <&blsp2_uart3_4pins_sleep>; +}; + +&camss { + vdda-supply = <&vreg_l2a_1p25>; +}; + +&gpu { + status = "okay"; +}; + +&hdmi { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>; + pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>; + + core-vdda-supply = <&vreg_l12a_1p8>; + core-vcc-supply = <&vreg_s4a_1p8>; +}; + +&hdmi_phy { + status = "okay"; + + vddio-supply = <&vreg_l12a_1p8>; + vcca-supply = <&vreg_l28a_0p925>; + #phy-cells = <0>; +}; + +&hsusb_phy1 { + status = "okay"; + + vdd-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; +}; + +&hsusb_phy2 { + status = "okay"; + + vdd-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; +}; + +&mdp { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mmcc { + vdd-gfx-supply = <&vdd_gfx>; +}; + +&mss_pil { + status = "okay"; + pll-supply = <&vreg_l12a_1p8>; + firmware-name = "qcom/apq8096/mba.mbn", "qcom/apq8096/modem.mbn"; +}; + +&pm8994_resin { + status = "okay"; + linux,code = ; +}; + +&tlmm { + gpio-line-names = + "[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */ + "[SPI0_DIN]", /* GPIO_1, BLSP1_SPI_MISO, LSEC pin 10 */ + "[SPI0_CS]", /* GPIO_2, BLSP1_SPI_CS_N, LSEC pin 12 */ + "[SPI0_SCLK]", /* GPIO_3, BLSP1_SPI_CLK, LSEC pin 8 */ + "[UART1_TxD]", /* GPIO_4, BLSP8_UART_TX, LSEC pin 11 */ + "[UART1_RxD]", /* GPIO_5, BLSP8_UART_RX, LSEC pin 13 */ + "[I2C1_SDA]", /* GPIO_6, BLSP8_I2C_SDA, LSEC pin 21 */ + "[I2C1_SCL]", /* GPIO_7, BLSP8_I2C_SCL, LSEC pin 19 */ + "GPIO-H", /* GPIO_8, LCD0_RESET_N, LSEC pin 30 */ + "TP93", /* GPIO_9 */ + "GPIO-G", /* GPIO_10, MDP_VSYNC_P, LSEC pin 29 */ + "[MDP_VSYNC_S]", /* GPIO_11, S HSEC pin 55 */ + "NC", /* GPIO_12 */ + "[CSI0_MCLK]", /* GPIO_13, CAM_MCLK0, P HSEC pin 15 */ + "[CAM_MCLK1]", /* GPIO_14, J14 pin 11 */ + "[CSI1_MCLK]", /* GPIO_15, CAM_MCLK2, P HSEC pin 17 */ + "TP99", /* GPIO_16 */ + "[I2C2_SDA]", /* GPIO_17, CCI_I2C_SDA0, P HSEC pin 34 */ + "[I2C2_SCL]", /* GPIO_18, CCI_I2C_SCL0, P HSEC pin 32 */ + "[CCI_I2C_SDA1]", /* GPIO_19, S HSEC pin 38 */ + "[CCI_I2C_SCL1]", /* GPIO_20, S HSEC pin 36 */ + "FLASH_STROBE_EN", /* GPIO_21, S HSEC pin 5 */ + "FLASH_STROBE_TRIG", /* GPIO_22, S HSEC pin 1 */ + "GPIO-K", /* GPIO_23, CAM2_RST_N, LSEC pin 33 */ + "GPIO-D", /* GPIO_24, LSEC pin 26 */ + "GPIO-I", /* GPIO_25, CAM0_RST_N, LSEC pin 31 */ + "GPIO-J", /* GPIO_26, CAM0_STANDBY_N, LSEC pin 32 */ + "BLSP6_I2C_SDA", /* GPIO_27 */ + "BLSP6_I2C_SCL", /* GPIO_28 */ + "GPIO-B", /* GPIO_29, TS0_RESET_N, LSEC pin 24 */ + "GPIO30", /* GPIO_30, S HSEC pin 4 */ + "HDMI_CEC", /* GPIO_31 */ + "HDMI_DDC_CLOCK", /* GPIO_32 */ + "HDMI_DDC_DATA", /* GPIO_33 */ + "HDMI_HOT_PLUG_DETECT", /* GPIO_34 */ + "PCIE0_RST_N", /* GPIO_35 */ + "PCIE0_CLKREQ_N", /* GPIO_36 */ + "PCIE0_WAKE", /* GPIO_37 */ + "SD_CARD_DET_N", /* GPIO_38 */ + "TSIF1_SYNC", /* GPIO_39, S HSEC pin 48 */ + "W_DISABLE_N", /* GPIO_40 */ + "[BLSP9_UART_TX]", /* GPIO_41 */ + "[BLSP9_UART_RX]", /* GPIO_42 */ + "[BLSP2_UART_CTS_N]", /* GPIO_43 */ + "[BLSP2_UART_RFR_N]", /* GPIO_44 */ + "[BLSP3_UART_TX]", /* GPIO_45 */ + "[BLSP3_UART_RX]", /* GPIO_46 */ + "[I2C0_SDA]", /* GPIO_47, LS_I2C0_SDA, LSEC pin 17 */ + "[I2C0_SCL]", /* GPIO_48, LS_I2C0_SCL, LSEC pin 15 */ + "[UART0_TxD]", /* GPIO_49, BLSP9_UART_TX, LSEC pin 5 */ + "[UART0_RxD]", /* GPIO_50, BLSP9_UART_RX, LSEC pin 7 */ + "[UART0_CTS]", /* GPIO_51, BLSP9_UART_CTS_N, LSEC pin 3 */ + "[UART0_RTS]", /* GPIO_52, BLSP9_UART_RFR_N, LSEC pin 9 */ + "[CODEC_INT1_N]", /* GPIO_53 */ + "[CODEC_INT2_N]", /* GPIO_54 */ + "[BLSP7_I2C_SDA]", /* GPIO_55 */ + "[BLSP7_I2C_SCL]", /* GPIO_56 */ + "MI2S_MCLK", /* GPIO_57, S HSEC pin 3 */ + "[PCM_CLK]", /* GPIO_58, QUA_MI2S_SCK, LSEC pin 18 */ + "[PCM_FS]", /* GPIO_59, QUA_MI2S_WS, LSEC pin 16 */ + "[PCM_DO]", /* GPIO_60, QUA_MI2S_DATA0, LSEC pin 20 */ + "[PCM_DI]", /* GPIO_61, QUA_MI2S_DATA1, LSEC pin 22 */ + "GPIO-E", /* GPIO_62, LSEC pin 27 */ + "TP87", /* GPIO_63 */ + "[CODEC_RST_N]", /* GPIO_64 */ + "[PCM1_CLK]", /* GPIO_65 */ + "[PCM1_SYNC]", /* GPIO_66 */ + "[PCM1_DIN]", /* GPIO_67 */ + "[PCM1_DOUT]", /* GPIO_68 */ + "AUDIO_REF_CLK", /* GPIO_69 */ + "SLIMBUS_CLK", /* GPIO_70 */ + "SLIMBUS_DATA0", /* GPIO_71 */ + "SLIMBUS_DATA1", /* GPIO_72 */ + "NC", /* GPIO_73 */ + "NC", /* GPIO_74 */ + "NC", /* GPIO_75 */ + "NC", /* GPIO_76 */ + "TP94", /* GPIO_77 */ + "NC", /* GPIO_78 */ + "TP95", /* GPIO_79 */ + "GPIO-A", /* GPIO_80, MEMS_RESET_N, LSEC pin 23 */ + "TP88", /* GPIO_81 */ + "TP89", /* GPIO_82 */ + "TP90", /* GPIO_83 */ + "TP91", /* GPIO_84 */ + "[SD_DAT0]", /* GPIO_85, BLSP12_SPI_MOSI, P HSEC pin 1 */ + "[SD_CMD]", /* GPIO_86, BLSP12_SPI_MISO, P HSEC pin 11 */ + "[SD_DAT3]", /* GPIO_87, BLSP12_SPI_CS_N, P HSEC pin 7 */ + "[SD_SCLK]", /* GPIO_88, BLSP12_SPI_CLK, P HSEC pin 9 */ + "TSIF1_CLK", /* GPIO_89, S HSEC pin 42 */ + "TSIF1_EN", /* GPIO_90, S HSEC pin 46 */ + "TSIF1_DATA", /* GPIO_91, S HSEC pin 44 */ + "NC", /* GPIO_92 */ + "TSIF2_CLK", /* GPIO_93, S HSEC pin 52 */ + "TSIF2_EN", /* GPIO_94, S HSEC pin 56 */ + "TSIF2_DATA", /* GPIO_95, S HSEC pin 54 */ + "TSIF2_SYNC", /* GPIO_96, S HSEC pin 58 */ + "NC", /* GPIO_97 */ + "CAM1_STANDBY_N", /* GPIO_98 */ + "NC", /* GPIO_99 */ + "NC", /* GPIO_100 */ + "[LCD1_RESET_N]", /* GPIO_101, S HSEC pin 51 */ + "BOOT_CONFIG1", /* GPIO_102 */ + "USB_HUB_RESET", /* GPIO_103 */ + "CAM1_RST_N", /* GPIO_104 */ + "NC", /* GPIO_105 */ + "NC", /* GPIO_106 */ + "NC", /* GPIO_107 */ + "NC", /* GPIO_108 */ + "NC", /* GPIO_109 */ + "NC", /* GPIO_110 */ + "NC", /* GPIO_111 */ + "NC", /* GPIO_112 */ + "PMI8994_BUA", /* GPIO_113 */ + "PCIE2_RST_N", /* GPIO_114 */ + "PCIE2_CLKREQ_N", /* GPIO_115 */ + "PCIE2_WAKE", /* GPIO_116 */ + "SSC_IRQ_0", /* GPIO_117 */ + "SSC_IRQ_1", /* GPIO_118 */ + "SSC_IRQ_2", /* GPIO_119 */ + "NC", /* GPIO_120 */ + "GPIO121", /* GPIO_121, S HSEC pin 2 */ + "NC", /* GPIO_122 */ + "SSC_IRQ_6", /* GPIO_123 */ + "SSC_IRQ_7", /* GPIO_124 */ + "GPIO-C", /* GPIO_125, TS_INT0, LSEC pin 25 */ + "BOOT_CONFIG5", /* GPIO_126 */ + "NC", /* GPIO_127 */ + "NC", /* GPIO_128 */ + "BOOT_CONFIG7", /* GPIO_129 */ + "PCIE1_RST_N", /* GPIO_130 */ + "PCIE1_CLKREQ_N", /* GPIO_131 */ + "PCIE1_WAKE", /* GPIO_132 */ + "GPIO-L", /* GPIO_133, CAM2_STANDBY_N, LSEC pin 34 */ + "NC", /* GPIO_134 */ + "NC", /* GPIO_135 */ + "BOOT_CONFIG8", /* GPIO_136 */ + "NC", /* GPIO_137 */ + "NC", /* GPIO_138 */ + "GPS_SSBI2", /* GPIO_139 */ + "GPS_SSBI1", /* GPIO_140 */ + "NC", /* GPIO_141 */ + "NC", /* GPIO_142 */ + "NC", /* GPIO_143 */ + "BOOT_CONFIG6", /* GPIO_144 */ + "NC", /* GPIO_145 */ + "NC", /* GPIO_146 */ + "NC", /* GPIO_147 */ + "NC", /* GPIO_148 */ + "NC"; /* GPIO_149 */ + + sdc2_cd_on: sdc2_cd_on { + mux { + pins = "gpio38"; + function = "gpio"; + }; + + config { + pins = "gpio38"; + bias-pull-up; /* pull up */ + drive-strength = <16>; /* 16 MA */ + }; + }; + + sdc2_cd_off: sdc2_cd_off { + mux { + pins = "gpio38"; + function = "gpio"; + }; + + config { + pins = "gpio38"; + bias-pull-up; /* pull up */ + drive-strength = <2>; /* 2 MA */ + }; + }; + + hdmi_hpd_active: hdmi_hpd_active { + mux { + pins = "gpio34"; + function = "hdmi_hot"; + }; + + config { + pins = "gpio34"; + bias-pull-down; + drive-strength = <16>; + }; + }; + + hdmi_hpd_suspend: hdmi_hpd_suspend { + mux { + pins = "gpio34"; + function = "hdmi_hot"; + }; + + config { + pins = "gpio34"; + bias-pull-down; + drive-strength = <2>; + }; + }; + + hdmi_ddc_active: hdmi_ddc_active { + mux { + pins = "gpio32", "gpio33"; + function = "hdmi_ddc"; + }; + + config { + pins = "gpio32", "gpio33"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + hdmi_ddc_suspend: hdmi_ddc_suspend { + mux { + pins = "gpio32", "gpio33"; + function = "hdmi_ddc"; + }; + + config { + pins = "gpio32", "gpio33"; + drive-strength = <2>; + bias-pull-down; + }; + }; +}; + +&pcie0 { + status = "okay"; + perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; + vddpe-3v3-supply = <&wlan_en>; + vdda-supply = <&vreg_l28a_0p925>; +}; + +&pcie1 { + status = "okay"; + perst-gpios = <&tlmm 130 GPIO_ACTIVE_LOW>; + vdda-supply = <&vreg_l28a_0p925>; +}; + +&pcie2 { + status = "okay"; + perst-gpios = <&tlmm 114 GPIO_ACTIVE_LOW>; + vdda-supply = <&vreg_l28a_0p925>; +}; + +&pcie_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; +}; + +&pm8994_gpios { + gpio-line-names = + "NC", + "KEY_VOLP_N", + "NC", + "BL1_PWM", + "GPIO-F", /* BL0_PWM, LSEC pin 28 */ + "BL1_EN", + "NC", + "WLAN_EN", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "DIVCLK1", + "DIVCLK2", + "DIVCLK3", + "DIVCLK4", + "BT_EN", + "PMIC_SLB", + "PMIC_BUA", + "USB_VBUS_DET"; + + pinctrl-names = "default"; + pinctrl-0 = <&ls_exp_gpio_f &bt_en_gpios>; + + ls_exp_gpio_f: pm8994-gpio5-state { + pinconf { + pins = "gpio5"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + power-source = <2>; // PM8994_GPIO_S4, 1.8V + }; + }; + + bt_en_gpios: bt-en-pios-state { + pinconf { + pins = "gpio19"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + power-source = ; // 1.8V + qcom,drive-strength = ; + bias-pull-down; + }; + }; + + wlan_en_gpios: wlan-en-gpios-state { + pinconf { + pins = "gpio8"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + power-source = ; // 1.8V + qcom,drive-strength = ; + bias-pull-down; + }; + }; + + audio_mclk: clk-div1-state { + pinconf { + pins = "gpio15"; + function = "func1"; + power-source = ; // 1.8V + }; + }; + + volume_up_gpio: pm8996-gpio2-state { + pinconf { + pins = "gpio2"; + function = "normal"; + input-enable; + drive-push-pull; + bias-pull-up; + qcom,drive-strength = ; + power-source = ; // 1.8V + }; + }; + + divclk4_pin_a: divclk4-state { + pinconf { + pins = "gpio18"; + function = PMIC_GPIO_FUNC_FUNC2; + + bias-disable; + power-source = ; + }; + }; + + usb3_vbus_det_gpio: pm8996-gpio22-state { + pinconf { + pins = "gpio22"; + function = PMIC_GPIO_FUNC_NORMAL; + input-enable; + bias-pull-down; + qcom,drive-strength = ; + power-source = ; // 1.8V + }; + }; +}; + +&pm8994_mpps { + gpio-line-names = + "VDDPX_BIAS", + "WIFI_LED", + "NC", + "BT_LED", + "PM_MPP05", + "PM_MPP06", + "PM_MPP07", + "NC"; +}; + +&pm8994_spmi_regulators { + qcom,saw-reg = <&saw3>; + vdd_s11-supply = <&vph_pwr>; + + s9 { + qcom,saw-slave; + }; + s10 { + qcom,saw-slave; + }; + s11 { + qcom,saw-leader; + regulator-name = "VDD_APCC"; + regulator-always-on; + regulator-min-microvolt = <980000>; + regulator-max-microvolt = <980000>; + }; +}; + +&pmi8994_gpios { + gpio-line-names = + "NC", + "SPKR_AMP_EN1", + "SPKR_AMP_EN2", + "TP61", + "NC", + "USB2_VBUS_DET", + "NC", + "NC", + "NC", + "NC"; + + usb2_vbus_det_gpio: pmi8996-gpio6-state { + pinconf { + pins = "gpio6"; + function = PMIC_GPIO_FUNC_NORMAL; + input-enable; + bias-pull-down; + qcom,drive-strength = ; + power-source = ; // 1.8V + }; + }; +}; + +&pmi8994_lpg { + qcom,power-source = <1>; + + pinctrl-names = "default"; + pinctrl-0 = <&pmi8994_mpp2_userled4>; + + qcom,dtest = <0 0>, + <0 0>, + <0 0>, + <4 1>; + + status = "okay"; + + led@1 { + reg = <1>; + color = ; + function = LED_FUNCTION_HEARTBEAT; + function-enumerator = <1>; + + linux,default-trigger = "heartbeat"; + default-state = "on"; + }; + + led@2 { + reg = <2>; + color = ; + function = LED_FUNCTION_HEARTBEAT; + function-enumerator = <0>; + }; + + led@3 { + reg = <3>; + color = ; + function = LED_FUNCTION_HEARTBEAT; + function-enumerator = <2>; + }; + + led@4 { + reg = <4>; + color = ; + function = LED_FUNCTION_HEARTBEAT; + function-enumerator = <3>; + }; +}; + +&pmi8994_mpps { + pmi8994_mpp2_userled4: mpp2-userled4-state { + pins = "mpp2"; + function = "sink"; + + output-low; + qcom,dtest = <4>; + }; +}; + +&pmi8994_spmi_regulators { + vdd_s2-supply = <&vph_pwr>; + + vdd_gfx: s2 { + regulator-name = "VDD_GFX"; + regulator-min-microvolt = <980000>; + regulator-max-microvolt = <980000>; + }; +}; + +&rpm_requests { + pm8994-regulators { + compatible = "qcom,rpm-pm8994-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_s8-supply = <&vph_pwr>; + vdd_s9-supply = <&vph_pwr>; + vdd_s10-supply = <&vph_pwr>; + vdd_s11-supply = <&vph_pwr>; + vdd_s12-supply = <&vph_pwr>; + vdd_l1-supply = <&vreg_s1b_1p025>; + vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>; + vdd_l3_l11-supply = <&vreg_s3a_1p3>; + vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>; + vdd_l5_l7-supply = <&vreg_s5a_2p15>; + vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>; + vdd_l8_l16_l30-supply = <&vph_pwr>; + vdd_l9_l10_l18_l22-supply = <&vph_pwr_bbyp>; + vdd_l13_l19_l23_l24-supply = <&vph_pwr_bbyp>; + vdd_l14_l15-supply = <&vreg_s5a_2p15>; + vdd_l17_l29-supply = <&vph_pwr_bbyp>; + vdd_l20_l21-supply = <&vph_pwr_bbyp>; + vdd_l25-supply = <&vreg_s3a_1p3>; + vdd_lvs1_2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p3: s3 { + regulator-name = "vreg_s3a_1p3"; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + /** + * 1.8v required on LS expansion + * for mezzanine boards + */ + vreg_s4a_1p8: s4 { + regulator-name = "vreg_s4a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + vreg_s5a_2p15: s5 { + regulator-name = "vreg_s5a_2p15"; + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + }; + vreg_s7a_1p0: s7 { + regulator-name = "vreg_s7a_1p0"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + vreg_l1a_1p0: l1 { + regulator-name = "vreg_l1a_1p0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l2a_1p25: l2 { + regulator-name = "vreg_l2a_1p25"; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + }; + vreg_l3a_0p875: l3 { + regulator-name = "vreg_l3a_0p875"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + }; + vreg_l4a_1p225: l4 { + regulator-name = "vreg_l4a_1p225"; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + vreg_l6a_1p2: l6 { + regulator-name = "vreg_l6a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + vreg_l8a_1p8: l8 { + regulator-name = "vreg_l8a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l9a_1p8: l9 { + regulator-name = "vreg_l9a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l10a_1p8: l10 { + regulator-name = "vreg_l10a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l11a_1p15: l11 { + regulator-name = "vreg_l11a_1p15"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + vreg_l12a_1p8: l12 { + regulator-name = "vreg_l12a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l13a_2p95: l13 { + regulator-name = "vreg_l13a_2p95"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + vreg_l14a_1p8: l14 { + regulator-name = "vreg_l14a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l15a_1p8: l15 { + regulator-name = "vreg_l15a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l16a_2p7: l16 { + regulator-name = "vreg_l16a_2p7"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + vreg_l17a_2p8: l17 { + regulator-name = "vreg_l17a_2p8"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + vreg_l18a_2p85: l18 { + regulator-name = "vreg_l18a_2p85"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2900000>; + }; + vreg_l19a_2p8: l19 { + regulator-name = "vreg_l19a_2p8"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + vreg_l20a_2p95: l20 { + regulator-name = "vreg_l20a_2p95"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + vreg_l21a_2p95: l21 { + regulator-name = "vreg_l21a_2p95"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + vreg_l22a_3p0: l22 { + regulator-name = "vreg_l22a_3p0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + vreg_l23a_2p8: l23 { + regulator-name = "vreg_l23a_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + vreg_l24a_3p075: l24 { + regulator-name = "vreg_l24a_3p075"; + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + vreg_l25a_1p2: l25 { + regulator-name = "vreg_l25a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-allow-set-load; + }; + vreg_l26a_0p8: l27 { + regulator-name = "vreg_l26a_0p8"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l28a_0p925: l28 { + regulator-name = "vreg_l28a_0p925"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <925000>; + regulator-allow-set-load; + }; + vreg_l29a_2p8: l29 { + regulator-name = "vreg_l29a_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + vreg_l30a_1p8: l30 { + regulator-name = "vreg_l30a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l32a_1p8: l32 { + regulator-name = "vreg_l32a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_lvs1a_1p8: lvs1 { + regulator-name = "vreg_lvs1a_1p8"; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-name = "vreg_lvs2a_1p8"; + }; + }; + + pmi8994-regulators { + compatible = "qcom,rpm-pmi8994-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_bst_byp-supply = <&vph_pwr>; + + vph_pwr_bbyp: boost-bypass { + regulator-name = "vph_pwr_bbyp"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vreg_s1b_1p025: s1 { + regulator-name = "vreg_s1b_1p025"; + regulator-min-microvolt = <1025000>; + regulator-max-microvolt = <1025000>; + }; + }; +}; + +&sdhc2 { + /* External SD card */ + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_state_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_state_off &sdc2_cd_off>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vreg_l13a_2p95>; + status = "okay"; +}; + +&q6asmdai { + dai@0 { + reg = <0>; + }; + + dai@1 { + reg = <1>; + }; + + dai@2 { + reg = <2>; + }; +}; + +&sound { + compatible = "qcom,apq8096-sndcard"; + model = "DB820c"; + audio-routing = "RX_BIAS", "MCLK", + "MM_DL1", "MultiMedia1 Playback", + "MM_DL2", "MultiMedia2 Playback", + "MultiMedia3 Capture", "MM_UL3"; + + mm1-dai-link { + link-name = "MultiMedia1"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + mm2-dai-link { + link-name = "MultiMedia2"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + mm3-dai-link { + link-name = "MultiMedia3"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + hdmi-dai-link { + link-name = "HDMI"; + cpu { + sound-dai = <&q6afedai HDMI_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&hdmi 0>; + }; + }; + + slim-dai-link { + link-name = "SLIM Playback"; + cpu { + sound-dai = <&q6afedai SLIMBUS_6_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9335 AIF4_PB>; + }; + }; + + slimcap-dai-link { + link-name = "SLIM Capture"; + cpu { + sound-dai = <&q6afedai SLIMBUS_0_TX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9335 AIF1_CAP>; + }; + }; +}; + +&ufsphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; + vddp-ref-clk-supply = <&vreg_l25a_1p2>; +}; + +&ufshc { + status = "okay"; + + vcc-supply = <&vreg_l20a_2p95>; + vccq-supply = <&vreg_l25a_1p2>; + vccq2-supply = <&vreg_s4a_1p8>; + + vcc-max-microamp = <600000>; + vccq-max-microamp = <450000>; + vccq2-max-microamp = <450000>; +}; + +&usb2 { + status = "okay"; + extcon = <&usb2_id>; +}; + +&usb2_dwc3 { + extcon = <&usb2_id>; + dr_mode = "otg"; + maximum-speed = "high-speed"; +}; + +&usb3 { + status = "okay"; + extcon = <&usb3_id>; +}; + +&usb3_dwc3 { + extcon = <&usb3_id>; + dr_mode = "otg"; +}; + +&usb3phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; + +}; + +&venus { + status = "okay"; +}; + +&wcd9335 { + clock-names = "mclk", "slimbus"; + clocks = <&div1_mclk>, + <&rpmcc RPM_SMD_BB_CLK1>; + + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-buck-sido-supply = <&vreg_s4a_1p8>; + vdd-tx-supply = <&vreg_s4a_1p8>; + vdd-rx-supply = <&vreg_s4a_1p8>; + vdd-io-supply = <&vreg_s4a_1p8>; +}; diff --git a/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts b/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts new file mode 100644 index 000000000..9b20c1a47 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts @@ -0,0 +1,402 @@ +// SPDX-License-Identifier: BSD-3-Clause + +/dts-v1/; + +#include "msm8996.dtsi" +#include "pm8994.dtsi" +#include "pmi8994.dtsi" +#include +#include +#include + +/ { + model = "Inforce 6640 Single Board Computer"; + compatible = "inforce,ifc6640", "qcom,apq8096-sbc", "qcom,apq8096"; + + qcom,msm-id = <291 0x00030001>; + qcom,board-id = <0x00010018 0>; + + aliases { + serial0 = &blsp2_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + v1p05: v1p05-regulator { + compatible = "regulator-fixed"; + regulator-name = "v1p05"; + regulator-always-on; + regulator-boot-on; + + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + + vin-supply = <&v5p0>; + }; + + v12_poe: v12-poe-regulator { + compatible = "regulator-fixed"; + regulator-name = "v12_poe"; + regulator-always-on; + regulator-boot-on; + + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + v3p3: v3p3-regulator { + compatible = "regulator-fixed"; + regulator-name = "v3p3"; + regulator-always-on; + regulator-boot-on; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + vin-supply = <&v12_poe>; + }; + + v5p0: v5p0-regulator { + compatible = "regulator-fixed"; + regulator-name = "v5p0"; + regulator-always-on; + regulator-boot-on; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + vin-supply = <&v12_poe>; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + + regulator-min-microvolt = <3800000>; + regulator-max-microvolt = <3800000>; + }; +}; + +&blsp2_uart2 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_uart2_2pins_default>; + pinctrl-1 = <&blsp2_uart2_2pins_sleep>; +}; + +&gpu { + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_phy { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&tlmm { + sdc2_pins_default: sdc2-pins-default { + clk { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + + cd { + pins = "gpio38"; + function = "gpio"; + + bias-pull-up; + drive-strength = <16>; + }; + }; + + sdc2_pins_sleep: sdc2-pins-sleep { + clk { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + + cd { + pins = "gpio38"; + function = "gpio"; + bias-pull-up; + drive-strength = <2>; + }; + }; +}; + +&rpm_requests { + pm8994-regulators { + compatible = "qcom,rpm-pm8994-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_s8-supply = <&vph_pwr>; + vdd_s9-supply = <&vph_pwr>; + vdd_s10-supply = <&vph_pwr>; + vdd_s11-supply = <&vph_pwr>; + vdd_s12-supply = <&vph_pwr>; + vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>; + vdd_l3_l11-supply = <&vreg_s3a_1p3>; + vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>; + vdd_l5_l7-supply = <&vreg_s5a_2p15>; + vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>; + vdd_l8_l16_l30-supply = <&vph_pwr>; + vdd_l25-supply = <&vreg_s3a_1p3>; + vdd_lvs1_2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p3: s3 { + regulator-name = "vreg_s3a_1p3"; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + vreg_s4a_1p8: s4 { + regulator-name = "vreg_s4a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + vreg_s5a_2p15: s5 { + regulator-name = "vreg_s5a_2p15"; + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + }; + vreg_s7a_1p0: s7 { + regulator-name = "vreg_s7a_1p0"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + vreg_l1a_1p0: l1 { + regulator-name = "vreg_l1a_1p0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l2a_1p25: l2 { + regulator-name = "vreg_l2a_1p25"; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + }; + vreg_l3a_0p875: l3 { + regulator-name = "vreg_l3a_0p875"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + }; + vreg_l4a_1p225: l4 { + regulator-name = "vreg_l4a_1p225"; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + vreg_l6a_1p2: l6 { + regulator-name = "vreg_l6a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + vreg_l8a_1p8: l8 { + regulator-name = "vreg_l8a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l9a_1p8: l9 { + regulator-name = "vreg_l9a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l10a_1p8: l10 { + regulator-name = "vreg_l10a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l11a_1p15: l11 { + regulator-name = "vreg_l11a_1p15"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + vreg_l12a_1p8: l12 { + regulator-name = "vreg_l12a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l13a_2p95: l13 { + regulator-name = "vreg_l13a_2p95"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + vreg_l14a_1p8: l14 { + regulator-name = "vreg_l14a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l15a_1p8: l15 { + regulator-name = "vreg_l15a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l16a_2p7: l16 { + regulator-name = "vreg_l16a_2p7"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + vreg_l17a_2p8: l17 { + regulator-name = "vreg_l17a_2p8"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + vreg_l18a_2p85: l18 { + regulator-name = "vreg_l18a_2p85"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2900000>; + }; + vreg_l19a_2p8: l19 { + regulator-name = "vreg_l19a_2p8"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + vreg_l20a_2p95: l20 { + regulator-name = "vreg_l20a_2p95"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + vreg_l21a_2p95: l21 { + regulator-name = "vreg_l21a_2p95"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + vreg_l22a_3p0: l22 { + regulator-name = "vreg_l22a_3p0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + vreg_l23a_2p8: l23 { + regulator-name = "vreg_l23a_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + vreg_l24a_3p075: l24 { + regulator-name = "vreg_l24a_3p075"; + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + vreg_l25a_1p2: l25 { + regulator-name = "vreg_l25a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-allow-set-load; + }; + vreg_l26a_0p8: l27 { + regulator-name = "vreg_l26a_0p8"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l28a_0p925: l28 { + regulator-name = "vreg_l28a_0p925"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <925000>; + regulator-allow-set-load; + }; + vreg_l29a_2p8: l29 { + regulator-name = "vreg_l29a_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + vreg_l30a_1p8: l30 { + regulator-name = "vreg_l30a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l32a_1p8: l32 { + regulator-name = "vreg_l32a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_lvs1a_1p8: lvs1 { + regulator-name = "vreg_lvs1a_1p8"; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-name = "vreg_lvs2a_1p8"; + }; + }; +}; + +&sdhc2 { + status = "okay"; + + bus-width = <4>; + + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; + + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vreg_l13a_2p95>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_pins_default>; + pinctrl-1 = <&sdc2_pins_sleep>; +}; + +&ufshc { + status = "okay"; + + vcc-supply = <&vreg_l20a_2p95>; + vccq-supply = <&vreg_l25a_1p2>; + vccq2-supply = <&vreg_s4a_1p8>; + + vcc-max-microamp = <600000>; + vccq-max-microamp = <450000>; + vccq2-max-microamp = <450000>; +}; + +&ufsphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; +}; + +&venus { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts new file mode 100644 index 000000000..6a716c83e --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts @@ -0,0 +1,90 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * IPQ6018 CP01 board device tree source + * + * Copyright (c) 2019, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include "ipq6018.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ6018/AP-CP01-C1"; + compatible = "qcom,ipq6018-cp01", "qcom,ipq6018"; + + aliases { + serial0 = &blsp1_uart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + bootargs-append = " swiotlb=1"; + }; +}; + +&blsp1_uart3 { + pinctrl-0 = <&serial_3_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&blsp1_i2c3 { + pinctrl-0 = <&i2c_1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&blsp1_spi1 { + cs-select = <0>; + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + compatible = "micron,n25q128a11", "jedec,spi-nor"; + spi-max-frequency = <50000000>; + }; +}; + +&tlmm { + i2c_1_pins: i2c-1-pins { + pins = "gpio42", "gpio43"; + function = "blsp2_i2c"; + drive-strength = <8>; + }; + + spi_0_pins: spi-0-pins { + pins = "gpio38", "gpio39", "gpio40", "gpio41"; + function = "blsp0_spi"; + drive-strength = <8>; + bias-pull-down; + }; +}; + +&qpic_bam { + status = "okay"; +}; + +&qpic_nand { + status = "okay"; + + nand@0 { + reg = <0>; + + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-bus-width = <8>; + }; +}; + +&qusb_phy_1 { + status = "ok"; +}; + +&usb2 { + status = "ok"; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi new file mode 100644 index 000000000..1533c61cb --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi @@ -0,0 +1,817 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * IPQ6018 SoC device tree source + * + * Copyright (c) 2019, The Linux Foundation. All rights reserved. + */ + +#include +#include +#include +#include + +/ { + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&intc>; + + clocks { + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + clock-frequency = <32000>; + #clock-cells = <0>; + }; + + xo: xo { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + #clock-cells = <0>; + }; + }; + + cpus: cpus { + #address-cells = <1>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + clock-names = "cpu"; + operating-points-v2 = <&cpu_opp_table>; + cpu-supply = <&ipq6018_s2>; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + enable-method = "psci"; + reg = <0x1>; + next-level-cache = <&L2_0>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + clock-names = "cpu"; + operating-points-v2 = <&cpu_opp_table>; + cpu-supply = <&ipq6018_s2>; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + enable-method = "psci"; + reg = <0x2>; + next-level-cache = <&L2_0>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + clock-names = "cpu"; + operating-points-v2 = <&cpu_opp_table>; + cpu-supply = <&ipq6018_s2>; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + enable-method = "psci"; + reg = <0x3>; + next-level-cache = <&L2_0>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + clock-names = "cpu"; + operating-points-v2 = <&cpu_opp_table>; + cpu-supply = <&ipq6018_s2>; + }; + + L2_0: l2-cache { + compatible = "cache"; + cache-level = <0x2>; + }; + }; + + cpu_opp_table: opp-table-cpu { + compatible = "operating-points-v2"; + opp-shared; + + opp-864000000 { + opp-hz = /bits/ 64 <864000000>; + opp-microvolt = <725000>; + clock-latency-ns = <200000>; + }; + opp-1056000000 { + opp-hz = /bits/ 64 <1056000000>; + opp-microvolt = <787500>; + clock-latency-ns = <200000>; + }; + opp-1320000000 { + opp-hz = /bits/ 64 <1320000000>; + opp-microvolt = <862500>; + clock-latency-ns = <200000>; + }; + opp-1440000000 { + opp-hz = /bits/ 64 <1440000000>; + opp-microvolt = <925000>; + clock-latency-ns = <200000>; + }; + opp-1608000000 { + opp-hz = /bits/ 64 <1608000000>; + opp-microvolt = <987500>; + clock-latency-ns = <200000>; + }; + opp-1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <1062500>; + clock-latency-ns = <200000>; + }; + }; + + firmware { + scm { + compatible = "qcom,scm-ipq6018", "qcom,scm"; + }; + }; + + pmuv8: pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = ; + }; + + psci: psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + rpm_msg_ram: memory@60000 { + reg = <0x0 0x00060000 0x0 0x6000>; + no-map; + }; + + tz: memory@4a600000 { + reg = <0x0 0x4a600000 0x0 0x00400000>; + no-map; + }; + + smem_region: memory@4aa00000 { + reg = <0x0 0x4aa00000 0x0 0x00100000>; + no-map; + }; + + q6_region: memory@4ab00000 { + reg = <0x0 0x4ab00000 0x0 0x05500000>; + no-map; + }; + }; + + smem { + compatible = "qcom,smem"; + memory-region = <&smem_region>; + hwlocks = <&tcsr_mutex 3>; + }; + + soc: soc { + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x0 0xffffffff>; + dma-ranges; + compatible = "simple-bus"; + + prng: qrng@e1000 { + compatible = "qcom,prng-ee"; + reg = <0x0 0x000e3000 0x0 0x1000>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; + + cryptobam: dma-controller@704000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x0 0x00704000 0x0 0x20000>; + interrupts = ; + clocks = <&gcc GCC_CRYPTO_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <1>; + qcom,controlled-remotely; + }; + + crypto: crypto@73a000 { + compatible = "qcom,crypto-v5.1"; + reg = <0x0 0x0073a000 0x0 0x6000>; + clocks = <&gcc GCC_CRYPTO_AHB_CLK>, + <&gcc GCC_CRYPTO_AXI_CLK>, + <&gcc GCC_CRYPTO_CLK>; + clock-names = "iface", "bus", "core"; + dmas = <&cryptobam 2>, <&cryptobam 3>; + dma-names = "rx", "tx"; + }; + + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq6018-pinctrl"; + reg = <0x0 0x01000000 0x0 0x300000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 80>; + interrupt-controller; + #interrupt-cells = <2>; + + serial_3_pins: serial3-pinmux { + pins = "gpio44", "gpio45"; + function = "blsp2_uart"; + drive-strength = <8>; + bias-pull-down; + }; + + qpic_pins: qpic-pins { + pins = "gpio1", "gpio3", "gpio4", + "gpio5", "gpio6", "gpio7", + "gpio8", "gpio10", "gpio11", + "gpio12", "gpio13", "gpio14", + "gpio15", "gpio17"; + function = "qpic_pad"; + drive-strength = <8>; + bias-disable; + }; + }; + + gcc: gcc@1800000 { + compatible = "qcom,gcc-ipq6018"; + reg = <0x0 0x01800000 0x0 0x80000>; + clocks = <&xo>, <&sleep_clk>; + clock-names = "xo", "sleep_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + tcsr_mutex: hwlock@1905000 { + compatible = "qcom,ipq6018-tcsr-mutex", "qcom,tcsr-mutex"; + reg = <0x0 0x01905000 0x0 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr: syscon@1937000 { + compatible = "qcom,tcsr-ipq6018", "syscon"; + reg = <0x0 0x01937000 0x0 0x21000>; + }; + + blsp_dma: dma-controller@7884000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x0 0x07884000 0x0 0x2b000>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + blsp1_uart3: serial@78b1000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x0 0x078b1000 0x0 0x200>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + blsp1_spi1: spi@78b5000 { + compatible = "qcom,spi-qup-v2.2.1"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x078b5000 0x0 0x600>; + interrupts = ; + spi-max-frequency = <50000000>; + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 12>, <&blsp_dma 13>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + blsp1_spi2: spi@78b6000 { + compatible = "qcom,spi-qup-v2.2.1"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x078b6000 0x0 0x600>; + interrupts = ; + spi-max-frequency = <50000000>; + clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 14>, <&blsp_dma 15>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + blsp1_i2c2: i2c@78b6000 { + compatible = "qcom,i2c-qup-v2.2.1"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x078b6000 0x0 0x600>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + dmas = <&blsp_dma 14>, <&blsp_dma 15>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + blsp1_i2c3: i2c@78b7000 { + compatible = "qcom,i2c-qup-v2.2.1"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x078b7000 0x0 0x600>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + dmas = <&blsp_dma 16>, <&blsp_dma 17>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + qpic_bam: dma-controller@7984000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x0 0x07984000 0x0 0x1a000>; + interrupts = ; + clocks = <&gcc GCC_QPIC_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + status = "disabled"; + }; + + qpic_nand: nand@79b0000 { + compatible = "qcom,ipq6018-nand"; + reg = <0x0 0x079b0000 0x0 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QPIC_CLK>, + <&gcc GCC_QPIC_AHB_CLK>; + clock-names = "core", "aon"; + + dmas = <&qpic_bam 0>, + <&qpic_bam 1>, + <&qpic_bam 2>; + dma-names = "tx", "rx", "cmd"; + pinctrl-0 = <&qpic_pins>; + pinctrl-names = "default"; + status = "disabled"; + }; + + intc: interrupt-controller@b000000 { + compatible = "qcom,msm-qgic2"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-controller; + #interrupt-cells = <0x3>; + reg = <0x0 0x0b000000 0x0 0x1000>, /*GICD*/ + <0x0 0x0b002000 0x0 0x1000>, /*GICC*/ + <0x0 0x0b001000 0x0 0x1000>, /*GICH*/ + <0x0 0x0b004000 0x0 0x1000>; /*GICV*/ + interrupts = ; + ranges = <0 0 0 0xb00a000 0 0xffd>; + + v2m@0 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x0 0x0 0x0 0xffd>; + }; + }; + + pcie_phy: phy@84000 { + compatible = "qcom,ipq6018-qmp-pcie-phy"; + reg = <0x0 0x00084000 0x0 0x1bc>; /* Serdes PLL */ + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_PCIE0_AUX_CLK>, + <&gcc GCC_PCIE0_AHB_CLK>; + clock-names = "aux", "cfg_ahb"; + + resets = <&gcc GCC_PCIE0_PHY_BCR>, + <&gcc GCC_PCIE0PHY_PHY_BCR>; + reset-names = "phy", + "common"; + + pcie_phy0: phy@84200 { + reg = <0x0 0x00084200 0x0 0x16c>, /* Serdes Tx */ + <0x0 0x00084400 0x0 0x200>, /* Serdes Rx */ + <0x0 0x00084800 0x0 0x1f0>, /* PCS: Lane0, COM, PCIE */ + <0x0 0x00084c00 0x0 0xf4>; /* pcs_misc */ + #phy-cells = <0>; + + clocks = <&gcc GCC_PCIE0_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "gcc_pcie0_pipe_clk_src"; + #clock-cells = <0>; + }; + }; + + pcie0: pci@20000000 { + compatible = "qcom,pcie-ipq6018"; + reg = <0x0 0x20000000 0x0 0xf1d>, + <0x0 0x20000f20 0x0 0xa8>, + <0x0 0x20001000 0x0 0x1000>, + <0x0 0x80000 0x0 0x4000>, + <0x0 0x20100000 0x0 0x1000>; + reg-names = "dbi", "elbi", "atu", "parf", "config"; + + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + max-link-speed = <3>; + #address-cells = <3>; + #size-cells = <2>; + + phys = <&pcie_phy0>; + phy-names = "pciephy"; + + ranges = <0x81000000 0x0 0x00000000 0x0 0x20200000 0x0 0x10000>, + <0x82000000 0x0 0x20220000 0x0 0x20220000 0x0 0xfde0000>; + + interrupts = ; + interrupt-names = "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 75 + IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 78 + IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 79 + IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 83 + IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>, + <&gcc GCC_PCIE0_AXI_M_CLK>, + <&gcc GCC_PCIE0_AXI_S_CLK>, + <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>, + <&gcc PCIE0_RCHNG_CLK>; + clock-names = "iface", + "axi_m", + "axi_s", + "axi_bridge", + "rchng"; + + resets = <&gcc GCC_PCIE0_PIPE_ARES>, + <&gcc GCC_PCIE0_SLEEP_ARES>, + <&gcc GCC_PCIE0_CORE_STICKY_ARES>, + <&gcc GCC_PCIE0_AXI_MASTER_ARES>, + <&gcc GCC_PCIE0_AXI_SLAVE_ARES>, + <&gcc GCC_PCIE0_AHB_ARES>, + <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>, + <&gcc GCC_PCIE0_AXI_SLAVE_STICKY_ARES>; + reset-names = "pipe", + "sleep", + "sticky", + "axi_m", + "axi_s", + "ahb", + "axi_m_sticky", + "axi_s_sticky"; + + status = "disabled"; + }; + + watchdog@b017000 { + compatible = "qcom,kpss-wdt"; + interrupts = ; + reg = <0x0 0x0b017000 0x0 0x40>; + clocks = <&sleep_clk>; + timeout-sec = <10>; + }; + + apcs_glb: mailbox@b111000 { + compatible = "qcom,ipq6018-apcs-apps-global"; + reg = <0x0 0x0b111000 0x0 0x1000>; + #clock-cells = <1>; + clocks = <&a53pll>, <&xo>; + clock-names = "pll", "xo"; + #mbox-cells = <1>; + }; + + a53pll: clock@b116000 { + compatible = "qcom,ipq6018-a53pll"; + reg = <0x0 0x0b116000 0x0 0x40>; + #clock-cells = <0>; + clocks = <&xo>; + clock-names = "xo"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; + + timer@b120000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0x10000000>; + compatible = "arm,armv7-timer-mem"; + reg = <0x0 0x0b120000 0x0 0x1000>; + + frame@b120000 { + frame-number = <0>; + interrupts = , + ; + reg = <0x0b121000 0x1000>, + <0x0b122000 0x1000>; + }; + + frame@b123000 { + frame-number = <1>; + interrupts = ; + reg = <0x0b123000 0x1000>; + status = "disabled"; + }; + + frame@b124000 { + frame-number = <2>; + interrupts = ; + reg = <0x0b124000 0x1000>; + status = "disabled"; + }; + + frame@b125000 { + frame-number = <3>; + interrupts = ; + reg = <0x0b125000 0x1000>; + status = "disabled"; + }; + + frame@b126000 { + frame-number = <4>; + interrupts = ; + reg = <0x0b126000 0x1000>; + status = "disabled"; + }; + + frame@b127000 { + frame-number = <5>; + interrupts = ; + reg = <0x0b127000 0x1000>; + status = "disabled"; + }; + + frame@b128000 { + frame-number = <6>; + interrupts = ; + reg = <0x0b128000 0x1000>; + status = "disabled"; + }; + }; + + q6v5_wcss: remoteproc@cd00000 { + compatible = "qcom,ipq6018-wcss-pil"; + reg = <0x0 0x0cd00000 0x0 0x4040>, + <0x0 0x004ab000 0x0 0x20>; + reg-names = "qdsp6", + "rmb"; + interrupts-extended = <&intc GIC_SPI 325 IRQ_TYPE_EDGE_RISING>, + <&wcss_smp2p_in 0 0>, + <&wcss_smp2p_in 1 0>, + <&wcss_smp2p_in 2 0>, + <&wcss_smp2p_in 3 0>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + resets = <&gcc GCC_WCSSAON_RESET>, + <&gcc GCC_WCSS_BCR>, + <&gcc GCC_WCSS_Q6_BCR>; + + reset-names = "wcss_aon_reset", + "wcss_reset", + "wcss_q6_reset"; + + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "prng"; + + qcom,halt-regs = <&tcsr 0x18000 0x1b000 0xe000>; + + qcom,smem-states = <&wcss_smp2p_out 0>, + <&wcss_smp2p_out 1>; + qcom,smem-state-names = "shutdown", + "stop"; + + memory-region = <&q6_region>; + + glink-edge { + interrupts = ; + label = "rtr"; + qcom,remote-pid = <1>; + mboxes = <&apcs_glb 8>; + + qrtr_requests { + qcom,glink-channels = "IPCRTR"; + }; + }; + }; + + mdio: mdio@90000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "qcom,ipq6018-mdio", "qcom,ipq4019-mdio"; + reg = <0x0 0x00090000 0x0 0x64>; + clocks = <&gcc GCC_MDIO_AHB_CLK>; + clock-names = "gcc_mdio_ahb_clk"; + status = "disabled"; + }; + + qusb_phy_1: qusb@59000 { + compatible = "qcom,ipq6018-qusb2-phy"; + reg = <0x0 0x00059000 0x0 0x180>; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB1_PHY_CFG_AHB_CLK>, + <&xo>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2_1_PHY_BCR>; + status = "disabled"; + }; + + usb2: usb@70f8800 { + compatible = "qcom,ipq6018-dwc3", "qcom,dwc3"; + reg = <0x0 0x070F8800 0x0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_USB1_MASTER_CLK>, + <&gcc GCC_USB1_SLEEP_CLK>, + <&gcc GCC_USB1_MOCK_UTMI_CLK>; + clock-names = "core", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB1_MASTER_CLK>, + <&gcc GCC_USB1_MOCK_UTMI_CLK>; + assigned-clock-rates = <133330000>, + <24000000>; + resets = <&gcc GCC_USB1_BCR>; + status = "disabled"; + + dwc_1: usb@7000000 { + compatible = "snps,dwc3"; + reg = <0x0 0x07000000 0x0 0xcd00>; + interrupts = ; + phys = <&qusb_phy_1>; + phy-names = "usb2-phy"; + tx-fifo-resize; + snps,is-utmi-l1-suspend; + snps,hird-threshold = /bits/ 8 <0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; + dr_mode = "host"; + }; + }; + + ssphy_0: ssphy@78000 { + compatible = "qcom,ipq6018-qmp-usb3-phy"; + reg = <0x0 0x00078000 0x0 0x1c4>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB0_AUX_CLK>, + <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, <&xo>; + clock-names = "aux", "cfg_ahb", "ref"; + + resets = <&gcc GCC_USB0_PHY_BCR>, + <&gcc GCC_USB3PHY_0_PHY_BCR>; + reset-names = "phy","common"; + status = "disabled"; + + usb0_ssphy: phy@78200 { + reg = <0x0 0x00078200 0x0 0x130>, /* Tx */ + <0x0 0x00078400 0x0 0x200>, /* Rx */ + <0x0 0x00078800 0x0 0x1f8>, /* PCS */ + <0x0 0x00078600 0x0 0x044>; /* PCS misc */ + #phy-cells = <0>; + #clock-cells = <0>; + clocks = <&gcc GCC_USB0_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "gcc_usb0_pipe_clk_src"; + }; + }; + + qusb_phy_0: qusb@79000 { + compatible = "qcom,ipq6018-qusb2-phy"; + reg = <0x0 0x00079000 0x0 0x180>; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, + <&xo>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2_0_PHY_BCR>; + status = "disabled"; + }; + + usb3: usb@8af8800 { + compatible = "qcom,ipq6018-dwc3", "qcom,dwc3"; + reg = <0x0 0x8af8800 0x0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>, + <&gcc GCC_USB0_MASTER_CLK>, + <&gcc GCC_USB0_SLEEP_CLK>, + <&gcc GCC_USB0_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>, + <&gcc GCC_USB0_MASTER_CLK>, + <&gcc GCC_USB0_MOCK_UTMI_CLK>; + assigned-clock-rates = <133330000>, + <133330000>, + <24000000>; + + resets = <&gcc GCC_USB0_BCR>; + status = "disabled"; + + dwc_0: usb@8a00000 { + compatible = "snps,dwc3"; + reg = <0x0 0x8a00000 0x0 0xcd00>; + interrupts = ; + phys = <&qusb_phy_0>, <&usb0_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + clocks = <&xo>; + clock-names = "ref"; + tx-fifo-resize; + snps,is-utmi-l1-suspend; + snps,hird-threshold = /bits/ 8 <0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; + dr_mode = "host"; + }; + }; + }; + + wcss: wcss-smp2p { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + + interrupt-parent = <&intc>; + interrupts = ; + + mboxes = <&apcs_glb 9>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + wcss_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + wcss_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + rpm-glink { + compatible = "qcom,glink-rpm"; + interrupts = ; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + mboxes = <&apcs_glb 0>; + + rpm_requests: glink-channel { + compatible = "qcom,rpm-ipq6018"; + qcom,glink-channels = "rpm_requests"; + + regulators { + compatible = "qcom,rpm-mp5496-regulators"; + + ipq6018_s2: s2 { + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1062500>; + regulator-always-on; + }; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts new file mode 100644 index 000000000..bb0a83889 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts @@ -0,0 +1,115 @@ +// SPDX-License-Identifier: GPL-2.0-only +/dts-v1/; +/* Copyright (c) 2017, The Linux Foundation. All rights reserved. + */ +#include "ipq8074.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ8074-HK01"; + compatible = "qcom,ipq8074-hk01", "qcom,ipq8074"; + + aliases { + serial0 = &blsp1_uart5; + serial1 = &blsp1_uart3; + }; + + chosen { + stdout-path = "serial0"; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0x0 0x20000000>; + }; + + vreg_dummy: regulator-dummy { }; +}; + +&blsp1_i2c2 { + status = "okay"; +}; + +&blsp1_spi1 { + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + }; +}; + +&blsp1_uart3 { + status = "okay"; +}; + +&blsp1_uart5 { + status = "okay"; +}; + +&pcie0 { + status = "okay"; + perst-gpios = <&tlmm 61 0x1>; +}; + +&pcie1 { + status = "okay"; + perst-gpios = <&tlmm 58 0x1>; +}; + +&pcie_qmp0 { + status = "okay"; +}; + +&pcie_qmp1 { + status = "okay"; +}; + +&qpic_bam { + status = "okay"; +}; + +&qpic_nand { + status = "okay"; + + nand@0 { + reg = <0>; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-bus-width = <8>; + }; +}; + +&sdhc_1 { + status = "okay"; +}; + +&qusb_phy_0 { + status = "okay"; +}; + +&qusb_phy_1 { + status = "okay"; +}; + +&ssphy_0 { + status = "okay"; + vdda-phy-supply = <&vreg_dummy>; + vdda-pll-supply = <&vreg_dummy>; +}; + +&ssphy_1 { + status = "okay"; + vdda-phy-supply = <&vreg_dummy>; + vdda-pll-supply = <&vreg_dummy>; +}; + +&usb_0 { + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dts new file mode 100644 index 000000000..2bfcf42ae --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* Copyright (c) 2020 The Linux Foundation. All rights reserved. + */ +/dts-v1/; + +#include "ipq8074-hk10.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ8074/AP-HK10-C1"; + compatible = "qcom,ipq8074-hk10-c1", "qcom,ipq8074"; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dts new file mode 100644 index 000000000..7da39f1d9 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dts @@ -0,0 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only +/dts-v1/; +/* Copyright (c) 2020 The Linux Foundation. All rights reserved. + */ +#include "ipq8074-hk10.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ8074/AP-HK10-C2"; + compatible = "qcom,ipq8074-hk10-c2", "qcom,ipq8074"; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi new file mode 100644 index 000000000..a695686af --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi @@ -0,0 +1,71 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ +/dts-v1/; + +#include "ipq8074.dtsi" + +/ { + aliases { + serial0 = &blsp1_uart5; + }; + + chosen { + stdout-path = "serial0"; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x40000000 0x0 0x20000000>; + }; +}; + +&blsp1_spi1 { + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + }; +}; + +&blsp1_uart5 { + status = "okay"; +}; + +&pcie0 { + status = "okay"; + perst-gpios = <&tlmm 58 0x1>; +}; + +&pcie1 { + status = "okay"; + perst-gpios = <&tlmm 61 0x1>; +}; + +&pcie_qmp0 { + status = "okay"; +}; + +&pcie_qmp1 { + status = "okay"; +}; + +&qpic_bam { + status = "okay"; +}; + +&qpic_nand { + status = "okay"; + + nand@0 { + reg = <0>; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-bus-width = <8>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi new file mode 100644 index 000000000..3d8e5ba51 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -0,0 +1,869 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2017, The Linux Foundation. All rights reserved. + */ + +#include +#include + +/ { + #address-cells = <2>; + #size-cells = <2>; + + model = "Qualcomm Technologies, Inc. IPQ8074"; + compatible = "qcom,ipq8074"; + interrupt-parent = <&intc>; + + clocks { + sleep_clk: sleep_clk { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; + }; + + xo: xo { + compatible = "fixed-clock"; + clock-frequency = <19200000>; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <0x1>; + #size-cells = <0x0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + enable-method = "psci"; + reg = <0x1>; + next-level-cache = <&L2_0>; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + enable-method = "psci"; + reg = <0x2>; + next-level-cache = <&L2_0>; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + enable-method = "psci"; + reg = <0x3>; + next-level-cache = <&L2_0>; + }; + + L2_0: l2-cache { + compatible = "cache"; + cache-level = <0x2>; + }; + }; + + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = ; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + smem@4ab00000 { + compatible = "qcom,smem"; + reg = <0x0 0x4ab00000 0x0 0x00100000>; + no-map; + + hwlocks = <&tcsr_mutex 3>; + }; + + memory@4ac00000 { + no-map; + reg = <0x0 0x4ac00000 0x0 0x00400000>; + }; + }; + + firmware { + scm { + compatible = "qcom,scm-ipq8074", "qcom,scm"; + }; + }; + + soc: soc { + #address-cells = <0x1>; + #size-cells = <0x1>; + ranges = <0 0 0 0xffffffff>; + compatible = "simple-bus"; + + ssphy_1: phy@58000 { + compatible = "qcom,ipq8074-qmp-usb3-phy"; + reg = <0x00058000 0x1c4>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_USB1_AUX_CLK>, + <&gcc GCC_USB1_PHY_CFG_AHB_CLK>, + <&xo>; + clock-names = "aux", "cfg_ahb", "ref"; + + resets = <&gcc GCC_USB1_PHY_BCR>, + <&gcc GCC_USB3PHY_1_PHY_BCR>; + reset-names = "phy","common"; + status = "disabled"; + + usb1_ssphy: phy@58200 { + reg = <0x00058200 0x130>, /* Tx */ + <0x00058400 0x200>, /* Rx */ + <0x00058800 0x1f8>, /* PCS */ + <0x00058600 0x044>; /* PCS misc*/ + #phy-cells = <0>; + #clock-cells = <0>; + clocks = <&gcc GCC_USB1_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3phy_1_cc_pipe_clk"; + }; + }; + + qusb_phy_1: phy@59000 { + compatible = "qcom,ipq8074-qusb2-phy"; + reg = <0x00059000 0x180>; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB1_PHY_CFG_AHB_CLK>, + <&xo>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2_1_PHY_BCR>; + status = "disabled"; + }; + + ssphy_0: phy@78000 { + compatible = "qcom,ipq8074-qmp-usb3-phy"; + reg = <0x00078000 0x1c4>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_USB0_AUX_CLK>, + <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, + <&xo>; + clock-names = "aux", "cfg_ahb", "ref"; + + resets = <&gcc GCC_USB0_PHY_BCR>, + <&gcc GCC_USB3PHY_0_PHY_BCR>; + reset-names = "phy","common"; + status = "disabled"; + + usb0_ssphy: phy@78200 { + reg = <0x00078200 0x130>, /* Tx */ + <0x00078400 0x200>, /* Rx */ + <0x00078800 0x1f8>, /* PCS */ + <0x00078600 0x044>; /* PCS misc*/ + #phy-cells = <0>; + #clock-cells = <0>; + clocks = <&gcc GCC_USB0_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3phy_0_cc_pipe_clk"; + }; + }; + + qusb_phy_0: phy@79000 { + compatible = "qcom,ipq8074-qusb2-phy"; + reg = <0x00079000 0x180>; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, + <&xo>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2_0_PHY_BCR>; + status = "disabled"; + }; + + pcie_qmp0: phy@84000 { + compatible = "qcom,ipq8074-qmp-gen3-pcie-phy"; + reg = <0x00084000 0x1bc>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_PCIE0_AUX_CLK>, + <&gcc GCC_PCIE0_AHB_CLK>; + clock-names = "aux", "cfg_ahb"; + resets = <&gcc GCC_PCIE0_PHY_BCR>, + <&gcc GCC_PCIE0PHY_PHY_BCR>; + reset-names = "phy", + "common"; + status = "disabled"; + + pcie_phy0: phy@84200 { + reg = <0x84200 0x16c>, + <0x84400 0x200>, + <0x84800 0x1f0>, + <0x84c00 0xf4>; + #phy-cells = <0>; + #clock-cells = <0>; + clocks = <&gcc GCC_PCIE0_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "pcie20_phy0_pipe_clk"; + }; + }; + + pcie_qmp1: phy@8e000 { + compatible = "qcom,ipq8074-qmp-pcie-phy"; + reg = <0x0008e000 0x1c4>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_PCIE1_AUX_CLK>, + <&gcc GCC_PCIE1_AHB_CLK>; + clock-names = "aux", "cfg_ahb"; + resets = <&gcc GCC_PCIE1_PHY_BCR>, + <&gcc GCC_PCIE1PHY_PHY_BCR>; + reset-names = "phy", + "common"; + status = "disabled"; + + pcie_phy1: phy@8e200 { + reg = <0x8e200 0x130>, + <0x8e400 0x200>, + <0x8e800 0x1f8>; + #phy-cells = <0>; + #clock-cells = <0>; + clocks = <&gcc GCC_PCIE1_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "pcie20_phy1_pipe_clk"; + }; + }; + + mdio: mdio@90000 { + compatible = "qcom,ipq4019-mdio"; + reg = <0x00090000 0x64>; + #address-cells = <1>; + #size-cells = <0>; + + clocks = <&gcc GCC_MDIO_AHB_CLK>; + clock-names = "gcc_mdio_ahb_clk"; + + status = "disabled"; + }; + + prng: rng@e3000 { + compatible = "qcom,prng-ee"; + reg = <0x000e3000 0x1000>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + status = "disabled"; + }; + + cryptobam: dma-controller@704000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x00704000 0x20000>; + interrupts = ; + clocks = <&gcc GCC_CRYPTO_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <1>; + qcom,controlled-remotely; + status = "disabled"; + }; + + crypto: crypto@73a000 { + compatible = "qcom,crypto-v5.1"; + reg = <0x0073a000 0x6000>; + clocks = <&gcc GCC_CRYPTO_AHB_CLK>, + <&gcc GCC_CRYPTO_AXI_CLK>, + <&gcc GCC_CRYPTO_CLK>; + clock-names = "iface", "bus", "core"; + dmas = <&cryptobam 2>, <&cryptobam 3>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq8074-pinctrl"; + reg = <0x01000000 0x300000>; + interrupts = ; + gpio-controller; + gpio-ranges = <&tlmm 0 0 70>; + #gpio-cells = <0x2>; + interrupt-controller; + #interrupt-cells = <0x2>; + + serial_4_pins: serial4-pinmux { + pins = "gpio23", "gpio24"; + function = "blsp4_uart1"; + drive-strength = <8>; + bias-disable; + }; + + i2c_0_pins: i2c-0-pinmux { + pins = "gpio42", "gpio43"; + function = "blsp1_i2c"; + drive-strength = <8>; + bias-disable; + }; + + spi_0_pins: spi-0-pins { + pins = "gpio38", "gpio39", "gpio40", "gpio41"; + function = "blsp0_spi"; + drive-strength = <8>; + bias-disable; + }; + + hsuart_pins: hsuart-pins { + pins = "gpio46", "gpio47", "gpio48", "gpio49"; + function = "blsp2_uart"; + drive-strength = <8>; + bias-disable; + }; + + qpic_pins: qpic-pins { + pins = "gpio1", "gpio3", "gpio4", + "gpio5", "gpio6", "gpio7", + "gpio8", "gpio10", "gpio11", + "gpio12", "gpio13", "gpio14", + "gpio15", "gpio16", "gpio17"; + function = "qpic"; + drive-strength = <8>; + bias-disable; + }; + }; + + gcc: gcc@1800000 { + compatible = "qcom,gcc-ipq8074"; + reg = <0x01800000 0x80000>; + #clock-cells = <0x1>; + #power-domain-cells = <1>; + #reset-cells = <0x1>; + }; + + tcsr_mutex: hwlock@1905000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x01905000 0x20000>; + #hwlock-cells = <1>; + }; + + spmi_bus: spmi@200f000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0200f000 0x001000>, + <0x02400000 0x800000>, + <0x02c00000 0x800000>, + <0x03800000 0x200000>, + <0x0200a000 0x000700>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupts = ; + interrupt-names = "periph_irq"; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + cell-index = <0>; + }; + + sdhc_1: mmc@7824900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0x7824900 0x500>, <0x7824000 0x800>; + reg-names = "hc", "core"; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&xo>; + clock-names = "iface", "core", "xo"; + resets = <&gcc GCC_SDCC1_BCR>; + max-frequency = <384000000>; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + bus-width = <8>; + + status = "disabled"; + }; + + blsp_dma: dma-controller@7884000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07884000 0x2b000>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + blsp1_uart1: serial@78af000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078af000 0x200>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + blsp1_uart3: serial@78b1000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b1000 0x200>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 4>, + <&blsp_dma 5>; + dma-names = "tx", "rx"; + pinctrl-0 = <&hsuart_pins>; + pinctrl-names = "default"; + status = "disabled"; + }; + + blsp1_uart5: serial@78b3000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b3000 0x200>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-0 = <&serial_4_pins>; + pinctrl-names = "default"; + status = "disabled"; + }; + + blsp1_spi1: spi@78b5000 { + compatible = "qcom,spi-qup-v2.2.1"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x078b5000 0x600>; + interrupts = ; + spi-max-frequency = <50000000>; + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 12>, <&blsp_dma 13>; + dma-names = "tx", "rx"; + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "disabled"; + }; + + blsp1_i2c2: i2c@78b6000 { + compatible = "qcom,i2c-qup-v2.2.1"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x078b6000 0x600>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + dmas = <&blsp_dma 14>, <&blsp_dma 15>; + dma-names = "tx", "rx"; + pinctrl-0 = <&i2c_0_pins>; + pinctrl-names = "default"; + status = "disabled"; + }; + + blsp1_i2c3: i2c@78b7000 { + compatible = "qcom,i2c-qup-v2.2.1"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x078b7000 0x600>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <100000>; + dmas = <&blsp_dma 16>, <&blsp_dma 17>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + blsp1_i2c5: i2c@78b9000 { + compatible = "qcom,i2c-qup-v2.2.1"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x78b9000 0x600>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + dmas = <&blsp_dma 20>, <&blsp_dma 21>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + blsp1_i2c6: i2c@78ba000 { + compatible = "qcom,i2c-qup-v2.2.1"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x078ba000 0x600>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <100000>; + dmas = <&blsp_dma 22>, <&blsp_dma 23>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + qpic_bam: dma-controller@7984000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07984000 0x1a000>; + interrupts = ; + clocks = <&gcc GCC_QPIC_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + status = "disabled"; + }; + + qpic_nand: nand-controller@79b0000 { + compatible = "qcom,ipq8074-nand"; + reg = <0x079b0000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QPIC_CLK>, + <&gcc GCC_QPIC_AHB_CLK>; + clock-names = "core", "aon"; + + dmas = <&qpic_bam 0>, + <&qpic_bam 1>, + <&qpic_bam 2>; + dma-names = "tx", "rx", "cmd"; + pinctrl-0 = <&qpic_pins>; + pinctrl-names = "default"; + status = "disabled"; + }; + + usb_0: usb@8af8800 { + compatible = "qcom,ipq8074-dwc3", "qcom,dwc3"; + reg = <0x08af8800 0x400>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>, + <&gcc GCC_USB0_MASTER_CLK>, + <&gcc GCC_USB0_SLEEP_CLK>, + <&gcc GCC_USB0_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>, + <&gcc GCC_USB0_MASTER_CLK>, + <&gcc GCC_USB0_MOCK_UTMI_CLK>; + assigned-clock-rates = <133330000>, + <133330000>, + <19200000>; + + power-domains = <&gcc USB0_GDSC>; + + resets = <&gcc GCC_USB0_BCR>; + status = "disabled"; + + dwc_0: usb@8a00000 { + compatible = "snps,dwc3"; + reg = <0x8a00000 0xcd00>; + interrupts = ; + phys = <&qusb_phy_0>, <&usb0_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + snps,is-utmi-l1-suspend; + snps,hird-threshold = /bits/ 8 <0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; + dr_mode = "host"; + }; + }; + + usb_1: usb@8cf8800 { + compatible = "qcom,ipq8074-dwc3", "qcom,dwc3"; + reg = <0x08cf8800 0x400>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_SYS_NOC_USB1_AXI_CLK>, + <&gcc GCC_USB1_MASTER_CLK>, + <&gcc GCC_USB1_SLEEP_CLK>, + <&gcc GCC_USB1_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_SYS_NOC_USB1_AXI_CLK>, + <&gcc GCC_USB1_MASTER_CLK>, + <&gcc GCC_USB1_MOCK_UTMI_CLK>; + assigned-clock-rates = <133330000>, + <133330000>, + <19200000>; + + power-domains = <&gcc USB1_GDSC>; + + resets = <&gcc GCC_USB1_BCR>; + status = "disabled"; + + dwc_1: usb@8c00000 { + compatible = "snps,dwc3"; + reg = <0x8c00000 0xcd00>; + interrupts = ; + phys = <&qusb_phy_1>, <&usb1_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + snps,is-utmi-l1-suspend; + snps,hird-threshold = /bits/ 8 <0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; + dr_mode = "host"; + }; + }; + + intc: interrupt-controller@b000000 { + compatible = "qcom,msm-qgic2"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <0x3>; + reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>; + ranges = <0 0xb00a000 0xffd>; + + v2m@0 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x0 0xffd>; + }; + }; + + watchdog: watchdog@b017000 { + compatible = "qcom,kpss-wdt"; + reg = <0xb017000 0x1000>; + interrupts = ; + clocks = <&sleep_clk>; + timeout-sec = <30>; + }; + + apcs_glb: mailbox@b111000 { + compatible = "qcom,ipq8074-apcs-apps-global"; + reg = <0x0b111000 0x1000>; + + #clock-cells = <1>; + #mbox-cells = <1>; + }; + + timer@b120000 { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0x0b120000 0x1000>; + + frame@b120000 { + frame-number = <0>; + interrupts = , + ; + reg = <0x0b121000 0x1000>, + <0x0b122000 0x1000>; + }; + + frame@b123000 { + frame-number = <1>; + interrupts = ; + reg = <0x0b123000 0x1000>; + status = "disabled"; + }; + + frame@b124000 { + frame-number = <2>; + interrupts = ; + reg = <0x0b124000 0x1000>; + status = "disabled"; + }; + + frame@b125000 { + frame-number = <3>; + interrupts = ; + reg = <0x0b125000 0x1000>; + status = "disabled"; + }; + + frame@b126000 { + frame-number = <4>; + interrupts = ; + reg = <0x0b126000 0x1000>; + status = "disabled"; + }; + + frame@b127000 { + frame-number = <5>; + interrupts = ; + reg = <0x0b127000 0x1000>; + status = "disabled"; + }; + + frame@b128000 { + frame-number = <6>; + interrupts = ; + reg = <0x0b128000 0x1000>; + status = "disabled"; + }; + }; + + pcie1: pci@10000000 { + compatible = "qcom,pcie-ipq8074"; + reg = <0x10000000 0xf1d>, + <0x10000f20 0xa8>, + <0x00088000 0x2000>, + <0x10100000 0x1000>; + reg-names = "dbi", "elbi", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <1>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + + phys = <&pcie_phy1>; + phy-names = "pciephy"; + + ranges = <0x81000000 0x0 0x00000000 0x10200000 0x0 0x10000>, /* I/O */ + <0x82000000 0x0 0x10220000 0x10220000 0x0 0xfde0000>; /* MEM */ + + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 142 + IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 143 + IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 144 + IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 145 + IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_SYS_NOC_PCIE1_AXI_CLK>, + <&gcc GCC_PCIE1_AXI_M_CLK>, + <&gcc GCC_PCIE1_AXI_S_CLK>, + <&gcc GCC_PCIE1_AHB_CLK>, + <&gcc GCC_PCIE1_AUX_CLK>; + clock-names = "iface", + "axi_m", + "axi_s", + "ahb", + "aux"; + resets = <&gcc GCC_PCIE1_PIPE_ARES>, + <&gcc GCC_PCIE1_SLEEP_ARES>, + <&gcc GCC_PCIE1_CORE_STICKY_ARES>, + <&gcc GCC_PCIE1_AXI_MASTER_ARES>, + <&gcc GCC_PCIE1_AXI_SLAVE_ARES>, + <&gcc GCC_PCIE1_AHB_ARES>, + <&gcc GCC_PCIE1_AXI_MASTER_STICKY_ARES>; + reset-names = "pipe", + "sleep", + "sticky", + "axi_m", + "axi_s", + "ahb", + "axi_m_sticky"; + status = "disabled"; + }; + + pcie0: pci@20000000 { + compatible = "qcom,pcie-ipq8074-gen3"; + reg = <0x20000000 0xf1d>, + <0x20000f20 0xa8>, + <0x20001000 0x1000>, + <0x00080000 0x4000>, + <0x20100000 0x1000>; + reg-names = "dbi", "elbi", "atu", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + max-link-speed = <3>; + #address-cells = <3>; + #size-cells = <2>; + + phys = <&pcie_phy0>; + phy-names = "pciephy"; + + ranges = <0x81000000 0x0 0x00000000 0x20200000 0x0 0x10000>, /* I/O */ + <0x82000000 0x0 0x20220000 0x20220000 0x0 0xfde0000>; /* MEM */ + + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 75 + IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 78 + IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 79 + IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 83 + IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>, + <&gcc GCC_PCIE0_AXI_M_CLK>, + <&gcc GCC_PCIE0_AXI_S_CLK>, + <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>, + <&gcc GCC_PCIE0_RCHNG_CLK>; + clock-names = "iface", + "axi_m", + "axi_s", + "axi_bridge", + "rchng"; + + resets = <&gcc GCC_PCIE0_PIPE_ARES>, + <&gcc GCC_PCIE0_SLEEP_ARES>, + <&gcc GCC_PCIE0_CORE_STICKY_ARES>, + <&gcc GCC_PCIE0_AXI_MASTER_ARES>, + <&gcc GCC_PCIE0_AXI_SLAVE_ARES>, + <&gcc GCC_PCIE0_AHB_ARES>, + <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>, + <&gcc GCC_PCIE0_AXI_SLAVE_STICKY_ARES>; + reset-names = "pipe", + "sleep", + "sticky", + "axi_m", + "axi_s", + "ahb", + "axi_m_sticky", + "axi_s_sticky"; + status = "disabled"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts new file mode 100644 index 000000000..3dc9619fd --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts @@ -0,0 +1,318 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-pm8916.dtsi" +#include +#include + +/ { + model = "Alcatel OneTouch Idol 3 (4.7)"; + compatible = "alcatel,idol347", "qcom,msm8916"; + chassis-type = "handset"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default>; + + label = "GPIO Buttons"; + + button-volume-up { + label = "Volume Up"; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&msmgpio 69 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_id_default>; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&blsp_i2c4 { + status = "okay"; + + touchscreen@26 { + compatible = "mstar,msg2638"; + reg = <0x26>; + interrupt-parent = <&msmgpio>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&msmgpio 100 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_reset_default>; + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l5>; + touchscreen-size-x = <2048>; + touchscreen-size-y = <2048>; + }; +}; + +&blsp_i2c5 { + status = "okay"; + + magnetometer@c { + compatible = "asahi-kasei,ak09911"; + reg = <0x0c>; + vdd-supply = <&pm8916_l17>; + vid-supply = <&pm8916_l6>; + reset-gpios = <&msmgpio 8 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&mag_reset_default>; + mount-matrix = "0", "1", "0", + "-1", "0", "0", + "0", "0", "1"; + }; + + accelerometer@f { + compatible = "kionix,kxtj21009"; + reg = <0x0f>; + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + interrupt-parent = <&msmgpio>; + interrupts = <31 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&accel_int_default>; + mount-matrix = "-1", "0", "0", + "0", "1", "0", + "0", "0", "-1"; + }; + + proximity@48 { + compatible = "sensortek,stk3310"; + reg = <0x48>; + interrupt-parent = <&msmgpio>; + interrupts = <12 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&proximity_int_default>; + }; + + gyroscope@68 { + compatible = "bosch,bmg160"; + reg = <0x68>; + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + interrupt-parent = <&msmgpio>; + interrupts = <97 IRQ_TYPE_EDGE_RISING>, + <98 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&gyro_int_default>; + }; +}; + +&pm8916_resin { + status = "okay"; + linux,code = ; +}; + +&pm8916_vib { + status = "okay"; +}; + +&pronto { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; +}; + +&usb { + status = "okay"; + extcon = <&usb_id>, <&usb_id>; +}; + +&usb_hs_phy { + extcon = <&usb_id>; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2800000>; + }; + + l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +&msmgpio { + accel_int_default: accel-int-default { + pins = "gpio31"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + gpio_keys_default: gpio-keys-default { + pins = "gpio107"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + + gyro_int_default: gyro-int-default { + pins = "gpio97", "gpio98"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + mag_reset_default: mag-reset-default { + pins = "gpio8"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + proximity_int_default: proximity-int-default { + pins = "gpio12"; + function = "gpio"; + + drive-strength = <6>; + bias-pull-up; + }; + + ts_int_reset_default: ts-int-reset-default { + pins = "gpio13", "gpio100"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + usb_id_default: usb-id-default { + pins = "gpio69"; + function = "gpio"; + + drive-strength = <8>; + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts new file mode 100644 index 000000000..dd92070a1 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts @@ -0,0 +1,321 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-pm8916.dtsi" +#include +#include +#include + +/ { + model = "Asus Zenfone 2 Laser"; + compatible = "asus,z00l", "qcom,msm8916"; + chassis-type = "handset"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default>; + + label = "GPIO Buttons"; + + button-volume-up { + label = "Volume Up"; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <15>; + }; + + button-volume-down { + label = "Volume Down"; + gpios = <&msmgpio 117 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <15>; + }; + }; + + reg_sd_vmmc: regulator-sdcard-vmmc { + compatible = "regulator-fixed"; + regulator-name = "sdcard-vmmc"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + gpio = <&msmgpio 87 GPIO_ACTIVE_HIGH>; + enable-active-high; + + startup-delay-us = <200>; + + pinctrl-names = "default"; + pinctrl-0 = <&sd_vmmc_en_default>; + }; + + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpios = <&msmgpio 110 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_id_default>; + }; +}; + +&blsp_i2c2 { + status = "okay"; + + magnetometer@c { + compatible = "asahi-kasei,ak09911"; + reg = <0x0c>; + + vdd-supply = <&pm8916_l8>; + vid-supply = <&pm8916_l6>; + + reset-gpios = <&msmgpio 112 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&mag_reset_default>; + }; + + imu@68 { + compatible = "invensense,mpu6515"; + reg = <0x68>; + + interrupt-parent = <&msmgpio>; + interrupts = <36 IRQ_TYPE_EDGE_RISING>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + + pinctrl-names = "default"; + pinctrl-0 = <&imu_default>; + + mount-matrix = "1", "0", "0", + "0", "-1", "0", + "0", "0", "1"; + }; +}; + +&blsp_i2c5 { + status = "okay"; + + touchscreen@38 { + compatible = "edt,edt-ft5306"; + reg = <0x38>; + + interrupt-parent = <&msmgpio>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + + reset-gpios = <&msmgpio 12 GPIO_ACTIVE_LOW>; + + vcc-supply = <&pm8916_l11>; + iovcc-supply = <&pm8916_l6>; + + touchscreen-size-x = <720>; + touchscreen-size-y = <1280>; + + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen_default>; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&pronto { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; +}; + +&sdhc_2 { + status = "okay"; + vmmc-supply = <®_sd_vmmc>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; +}; + +&usb { + status = "okay"; + extcon = <&usb_id>, <&usb_id>; +}; + +&usb_hs_phy { + extcon = <&usb_id>; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2800000>; + }; + + l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +&msmgpio { + gpio_keys_default: gpio-keys-default { + pins = "gpio107", "gpio117"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + + imu_default: imu-default { + pins = "gpio36"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + mag_reset_default: mag-reset-default { + pins = "gpio112"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + sd_vmmc_en_default: sd-vmmc-en-default { + pins = "gpio87"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + touchscreen_default: touchscreen-default { + pins = "gpio13"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + + reset { + pins = "gpio12"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + }; + + usb_id_default: usb-id-default { + pins = "gpio110"; + function = "gpio"; + + drive-strength = <8>; + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts new file mode 100644 index 000000000..9e470c672 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts @@ -0,0 +1,496 @@ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright (C) 2021 Stephan Gerhold + +/dts-v1/; + +#include "msm8916-pm8916.dtsi" +#include +#include +#include +#include +#include + +/* + * Note: The original firmware from Huawei can only boot 32-bit kernels. + * To boot this device tree using arm64 it is necessary to flash 64-bit TZ/HYP + * firmware (e.g. taken from the DragonBoard 410c). + * See https://wiki.postmarketos.org/wiki/Huawei_Ascend_G7_(huawei-g7) + * for suggested installation instructions. + */ + +/ { + model = "Huawei Ascend G7"; + compatible = "huawei,g7", "qcom,msm8916"; + chassis-type = "handset"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default>; + + label = "GPIO Buttons"; + + button-volume-up { + label = "Volume Up"; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_leds_default>; + + led-0 { + gpios = <&msmgpio 8 GPIO_ACTIVE_HIGH>; + color = ; + default-state = "off"; + function = LED_FUNCTION_INDICATOR; + }; + + led-1 { + gpios = <&msmgpio 9 GPIO_ACTIVE_HIGH>; + color = ; + default-state = "off"; + function = LED_FUNCTION_INDICATOR; + }; + + led-2 { + gpios = <&msmgpio 10 GPIO_ACTIVE_HIGH>; + color = ; + default-state = "off"; + function = LED_FUNCTION_INDICATOR; + }; + }; + + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&msmgpio 117 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_id_default>; + }; +}; + +&blsp_i2c2 { + status = "okay"; + + magnetometer@c { + compatible = "asahi-kasei,ak09911"; + reg = <0x0c>; + + vdd-supply = <&pm8916_l17>; + vid-supply = <&pm8916_l6>; + + reset-gpios = <&msmgpio 36 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&mag_reset_default>; + }; + + accelerometer@1e { + compatible = "kionix,kx023-1025"; + reg = <0x1e>; + + interrupt-parent = <&msmgpio>; + interrupts = <115 IRQ_TYPE_EDGE_RISING>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + + pinctrl-names = "default"; + pinctrl-0 = <&accel_irq_default>; + + mount-matrix = "-1", "0", "0", + "0", "1", "0", + "0", "0", "1"; + }; + + proximity@39 { + compatible = "avago,apds9930"; + reg = <0x39>; + + interrupt-parent = <&msmgpio>; + interrupts = <113 IRQ_TYPE_EDGE_FALLING>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + + led-max-microamp = <100000>; + amstaos,proximity-diodes = <1>; + + pinctrl-names = "default"; + pinctrl-0 = <&prox_irq_default>; + }; + + regulator@3e { + compatible = "ti,tps65132"; + reg = <0x3e>; + + pinctrl-names = "default"; + pinctrl-0 = <®_lcd_en_default>; + + reg_lcd_pos: outp { + regulator-name = "outp"; + regulator-min-microvolt = <5400000>; + regulator-max-microvolt = <5400000>; + enable-gpios = <&msmgpio 97 GPIO_ACTIVE_HIGH>; + regulator-active-discharge = <1>; + }; + + reg_lcd_neg: outn { + regulator-name = "outn"; + regulator-min-microvolt = <5400000>; + regulator-max-microvolt = <5400000>; + enable-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>; + regulator-active-discharge = <1>; + }; + }; +}; + +&blsp_i2c5 { + status = "okay"; + + rmi4@70 { + compatible = "syna,rmi4-i2c"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&msmgpio>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + + vdd-supply = <&pm8916_l17>; + vio-supply = <&pm8916_l16>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_irq_default>; + + syna,startup-delay-ms = <100>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; /* Allow sleeping */ + }; + + rmi4-f11@11 { + reg = <0x11>; + syna,sensor-type = <1>; /* Touchscreen */ + }; + }; +}; + +&blsp_i2c6 { + status = "okay"; + + nfc@28 { + compatible = "nxp,pn547", "nxp,nxp-nci-i2c"; + reg = <0x28>; + + interrupt-parent = <&msmgpio>; + interrupts = <21 IRQ_TYPE_EDGE_RISING>; + + enable-gpios = <&msmgpio 20 GPIO_ACTIVE_HIGH>; + firmware-gpios = <&msmgpio 2 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&nfc_default>; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&lpass { + status = "okay"; +}; + +&pm8916_resin { + status = "okay"; + linux,code = ; +}; + +&pm8916_vib { + status = "okay"; +}; + +&pronto { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdhc2_cd_default>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdhc2_cd_default>; + + /* + * The Huawei device tree sets cd-gpios = <&msmgpio 38 GPIO_ACTIVE_HIGH>. + * However, gpio38 does not change its state when inserting/removing the + * SD card, it's just low all the time. The Huawei kernel seems to use + * polling for SD card detection instead. + * + * However, looking closer at the GPIO debug output it turns out that + * gpio56 switches its state when inserting/removing the SD card. + * It behaves just like gpio38 normally does. Usually GPIO56 is used as + * "UIM2_PRESENT", i.e. to check if a second SIM card is inserted. + * Maybe Huawei decided to replace the second SIM card slot with the + * SD card slot and forgot to re-route to gpio38. + */ + cd-gpios = <&msmgpio 56 GPIO_ACTIVE_LOW>; +}; + +&sound { + status = "okay"; + + model = "msm8916"; + audio-routing = + "AMIC1", "MIC BIAS External1", + "AMIC2", "MIC BIAS External2", + "AMIC3", "MIC BIAS External1"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cdc_pdm_lines_act>; + pinctrl-1 = <&cdc_pdm_lines_sus>; + + primary-dai-link { + link-name = "WCD"; + cpu { + sound-dai = <&lpass MI2S_PRIMARY>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; + }; + }; + + tertiary-dai-link { + link-name = "WCD-Capture"; + cpu { + sound-dai = <&lpass MI2S_TERTIARY>; + }; + codec { + sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; + }; + }; +}; + +&usb { + status = "okay"; + extcon = <&usb_id>, <&usb_id>; +}; + +&usb_hs_phy { + extcon = <&usb_id>; +}; + +&wcd_codec { + qcom,micbias-lvl = <2800>; + qcom,mbhc-vthreshold-low = <75 150 237 450 500>; + qcom,mbhc-vthreshold-high = <75 150 237 450 500>; + qcom,hphl-jack-type-normally-open; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2800000>; + }; + + l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +&msmgpio { + accel_irq_default: accel-irq-default { + pins = "gpio115"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + gpio_keys_default: gpio-keys-default { + pins = "gpio107"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + + gpio_leds_default: gpio-leds-default { + pins = "gpio8", "gpio9", "gpio10"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + nfc_default: nfc-default { + pins = "gpio2", "gpio20", "gpio21"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + mag_reset_default: mag-reset-default { + pins = "gpio36"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + prox_irq_default: prox-irq-default { + pins = "gpio113"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + reg_lcd_en_default: reg-lcd-en-default { + pins = "gpio32", "gpio97"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + sdhc2_cd_default: sdhc2-cd-default { + pins = "gpio56"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + ts_irq_default: ts-irq-default { + pins = "gpio13"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + usb_id_default: usb-id-default { + pins = "gpio117"; + function = "gpio"; + + drive-strength = <8>; + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts new file mode 100644 index 000000000..75f7b4f35 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts @@ -0,0 +1,433 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-pm8916.dtsi" +#include +#include +#include +#include + +/ { + model = "Longcheer L8150"; + compatible = "longcheer,l8150", "qcom,msm8916-v1-qrd/9-v1", "qcom,msm8916"; + chassis-type = "handset"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + reserved-memory { + // wcnss.mdt is not relocatable, so it must be loaded at 0x8b600000 + /delete-node/ wcnss@89300000; + + wcnss_mem: wcnss@8b600000 { + reg = <0x0 0x8b600000 0x0 0x600000>; + no-map; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default>; + + label = "GPIO Buttons"; + + button-volume-up { + label = "Volume Up"; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + reg_ctp: regulator-ctp { + compatible = "regulator-fixed"; + regulator-name = "ctp"; + + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + + gpio = <&msmgpio 17 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&ctp_pwr_en_default>; + }; + + flash-led-controller { + compatible = "sgmicro,sgm3140"; + flash-gpios = <&msmgpio 31 GPIO_ACTIVE_HIGH>; + enable-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&camera_flash_default>; + + flash_led: led { + function = LED_FUNCTION_FLASH; + color = ; + flash-max-timeout-us = <250000>; + }; + }; +}; + +&blsp_i2c1 { + status = "okay"; + + led-controller@45 { + compatible = "awinic,aw2013"; + reg = <0x45>; + #address-cells = <1>; + #size-cells = <0>; + + vcc-supply = <&pm8916_l17>; + + led@0 { + reg = <0>; + led-max-microamp = <5000>; + function = LED_FUNCTION_INDICATOR; + color = ; + }; + + led@1 { + reg = <1>; + led-max-microamp = <5000>; + function = LED_FUNCTION_INDICATOR; + color = ; + }; + + led@2 { + reg = <2>; + led-max-microamp = <5000>; + function = LED_FUNCTION_INDICATOR; + color = ; + }; + }; +}; + +&blsp_i2c2 { + status = "okay"; + + accelerometer@10 { + compatible = "bosch,bmc156_accel"; + reg = <0x10>; + + /* + * For some reason the interrupt line is usually not connected + * to the BMC156. However, there are two pads next to the chip + * that can be shorted to make it work if needed. + * + * interrupt-parent = <&msmgpio>; + * interrupts = <116 IRQ_TYPE_EDGE_RISING>; + */ + + pinctrl-names = "default"; + pinctrl-0 = <&accel_int_default>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + + mount-matrix = "0", "1", "0", + "-1", "0", "0", + "0", "0", "1"; + }; + + magnetometer@12 { + compatible = "bosch,bmc156_magn"; + reg = <0x12>; + + interrupt-parent = <&msmgpio>; + interrupts = <113 IRQ_TYPE_EDGE_RISING>; + + pinctrl-names = "default"; + pinctrl-0 = <&magn_int_default>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + }; + + light-sensor@23 { + compatible = "liteon,ltr559"; + reg = <0x23>; + proximity-near-level = <75>; + + interrupt-parent = <&msmgpio>; + interrupts = <115 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&light_int_default>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + }; + + gyroscope@68 { + compatible = "bosch,bmg160"; + reg = <0x68>; + + interrupt-parent = <&msmgpio>; + interrupts = <23 IRQ_TYPE_EDGE_RISING>, + <22 IRQ_TYPE_EDGE_RISING>; + + pinctrl-names = "default"; + pinctrl-0 = <&gyro_int_default>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + }; +}; + +&blsp_i2c5 { + status = "okay"; + + rmi4@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&msmgpio>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + + vdd-supply = <®_ctp>; + vio-supply = <&pm8916_l6>; + + pinctrl-names = "default"; + pinctrl-0 = <&tp_int_default>; + + syna,startup-delay-ms = <10>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; // Allow sleeping + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; // Touchscreen + }; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&pm8916_resin { + status = "okay"; + linux,code = ; +}; + +&pm8916_usbin { + status = "okay"; +}; + +&pm8916_vib { + status = "okay"; +}; + +&pronto { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; + + non-removable; +}; + +&usb { + status = "okay"; + dr_mode = "peripheral"; + extcon = <&pm8916_usbin>; +}; + +&usb_hs_phy { + extcon = <&pm8916_usbin>; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2800000>; + }; + + l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +&msmgpio { + accel_int_default: accel-int-default { + pins = "gpio116"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + camera_flash_default: camera-flash-default { + pins = "gpio31", "gpio32"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + ctp_pwr_en_default: ctp-pwr-en-default { + pins = "gpio17"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + gpio_keys_default: gpio-keys-default { + pins = "gpio107"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + + gyro_int_default: gyro-int-default { + pins = "gpio22", "gpio23"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + light_int_default: light-int-default { + pins = "gpio115"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + magn_int_default: magn-int-default { + pins = "gpio113"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + tp_int_default: tp-int-default { + pins = "gpio13"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts new file mode 100644 index 000000000..b4812f093 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts @@ -0,0 +1,268 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-pm8916.dtsi" +#include +#include +#include + +/ { + model = "BQ Aquaris X5 (Longcheer L8910)"; + compatible = "longcheer,l8910", "qcom,msm8916"; + chassis-type = "handset"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default>; + + label = "GPIO Buttons"; + + button-volume-up { + label = "Volume Up"; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + gpios = <&msmgpio 17 GPIO_ACTIVE_HIGH>; + color = ; + default-state = "off"; + function = LED_FUNCTION_KBD_BACKLIGHT; + + pinctrl-names = "default"; + pinctrl-0 = <&button_backlight_default>; + }; + }; + + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&msmgpio 110 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_id_default>; + }; +}; + +&blsp_i2c3 { + status = "okay"; + + magnetometer@d { + compatible = "asahi-kasei,ak09911"; + reg = <0x0d>; + + vdd-supply = <&pm8916_l17>; + vid-supply = <&pm8916_l6>; + + reset-gpios = <&msmgpio 111 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&mag_reset_default>; + }; + + imu@68 { + compatible = "bosch,bmi160"; + reg = <0x68>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + + mount-matrix = "0", "1", "0", + "-1", "0", "0", + "0", "0", "1"; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&pm8916_resin { + status = "okay"; + linux,code = ; +}; + +&pm8916_vib { + status = "okay"; +}; + +&pronto { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; +}; + +&usb { + status = "okay"; + extcon = <&usb_id>, <&usb_id>; +}; + +&usb_hs_phy { + extcon = <&usb_id>; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2800000>; + }; + + l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +&msmgpio { + button_backlight_default: button-backlight-default { + pins = "gpio17"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + gpio_keys_default: gpio-keys-default { + pins = "gpio107"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + + mag_reset_default: mag-reset-default { + pins = "gpio111"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + usb_id_default: usb-id-default { + pins = "gpio110"; + function = "gpio"; + + drive-strength = <8>; + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-mtp.dts b/arch/arm64/boot/dts/qcom/msm8916-mtp.dts new file mode 100644 index 000000000..7c0ceb3cf --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-mtp.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include "msm8916-pm8916.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. MSM 8916 MTP"; + compatible = "qcom,msm8916-mtp", "qcom,msm8916-mtp/1", "qcom,msm8916"; + + aliases { + serial0 = &blsp1_uart2; + usid0 = &pm8916_0; + }; + + chosen { + stdout-path = "serial0"; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi new file mode 100644 index 000000000..7dedb91b9 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi @@ -0,0 +1,578 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved. + */ + +&msmgpio { + + blsp1_uart1_default: blsp1-uart1-default { + // TX, RX, CTS_N, RTS_N + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "blsp_uart1"; + + drive-strength = <16>; + bias-disable; + }; + + blsp1_uart1_sleep: blsp1-uart1-sleep { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; + }; + + blsp1_uart2_default: blsp1-uart2-default { + pins = "gpio4", "gpio5"; + function = "blsp_uart2"; + + drive-strength = <16>; + bias-disable; + }; + + blsp1_uart2_sleep: blsp1-uart2-sleep { + pins = "gpio4", "gpio5"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; + }; + + spi1_default: spi1-default { + pins = "gpio0", "gpio1", "gpio3"; + function = "blsp_spi1"; + + drive-strength = <12>; + bias-disable; + + cs { + pins = "gpio2"; + function = "gpio"; + + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + spi1_sleep: spi1-sleep { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; + }; + + spi2_default: spi2-default { + pins = "gpio4", "gpio5", "gpio7"; + function = "blsp_spi2"; + + drive-strength = <12>; + bias-disable; + + cs { + pins = "gpio6"; + function = "gpio"; + + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + spi2_sleep: spi2-sleep { + pins = "gpio4", "gpio5", "gpio6", "gpio7"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; + }; + + spi3_default: spi3-default { + pins = "gpio8", "gpio9", "gpio11"; + function = "blsp_spi3"; + + drive-strength = <12>; + bias-disable; + + cs { + pins = "gpio10"; + function = "gpio"; + + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + spi3_sleep: spi3-sleep { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; + }; + + spi4_default: spi4-default { + pins = "gpio12", "gpio13", "gpio15"; + function = "blsp_spi4"; + + drive-strength = <12>; + bias-disable; + + cs { + pins = "gpio14"; + function = "gpio"; + + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + spi4_sleep: spi4-sleep { + pins = "gpio12", "gpio13", "gpio14", "gpio15"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; + }; + + spi5_default: spi5-default { + pins = "gpio16", "gpio17", "gpio19"; + function = "blsp_spi5"; + + drive-strength = <12>; + bias-disable; + + cs { + pins = "gpio18"; + function = "gpio"; + + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + spi5_sleep: spi5-sleep { + pins = "gpio16", "gpio17", "gpio18", "gpio19"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; + }; + + spi6_default: spi6-default { + pins = "gpio20", "gpio21", "gpio23"; + function = "blsp_spi6"; + + drive-strength = <12>; + bias-disable; + + cs { + pins = "gpio22"; + function = "gpio"; + + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + spi6_sleep: spi6-sleep { + pins = "gpio20", "gpio21", "gpio22", "gpio23"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; + }; + + i2c1_default: i2c1-default { + pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; + + drive-strength = <2>; + bias-disable; + }; + + i2c1_sleep: i2c1-sleep { + pins = "gpio2", "gpio3"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + i2c2_default: i2c2-default { + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; + + drive-strength = <2>; + bias-disable; + }; + + i2c2_sleep: i2c2-sleep { + pins = "gpio6", "gpio7"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + i2c3_default: i2c3-default { + pins = "gpio10", "gpio11"; + function = "blsp_i2c3"; + + drive-strength = <2>; + bias-disable; + }; + + i2c3_sleep: i2c3-sleep { + pins = "gpio10", "gpio11"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + i2c4_default: i2c4-default { + pins = "gpio14", "gpio15"; + function = "blsp_i2c4"; + + drive-strength = <2>; + bias-disable; + }; + + i2c4_sleep: i2c4-sleep { + pins = "gpio14", "gpio15"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + i2c5_default: i2c5-default { + pins = "gpio18", "gpio19"; + function = "blsp_i2c5"; + + drive-strength = <2>; + bias-disable; + }; + + i2c5_sleep: i2c5-sleep { + pins = "gpio18", "gpio19"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + i2c6_default: i2c6-default { + pins = "gpio22", "gpio23"; + function = "blsp_i2c6"; + + drive-strength = <2>; + bias-disable; + }; + + i2c6_sleep: i2c6-sleep { + pins = "gpio22", "gpio23"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + pmx-sdc1-clk { + sdc1_clk_on: clk-on { + pins = "sdc1_clk"; + + bias-disable; + drive-strength = <16>; + }; + sdc1_clk_off: clk-off { + pins = "sdc1_clk"; + + bias-disable; + drive-strength = <2>; + }; + }; + + pmx-sdc1-cmd { + sdc1_cmd_on: cmd-on { + pins = "sdc1_cmd"; + + bias-pull-up; + drive-strength = <10>; + }; + sdc1_cmd_off: cmd-off { + pins = "sdc1_cmd"; + + bias-pull-up; + drive-strength = <2>; + }; + }; + + pmx-sdc1-data { + sdc1_data_on: data-on { + pins = "sdc1_data"; + + bias-pull-up; + drive-strength = <10>; + }; + sdc1_data_off: data-off { + pins = "sdc1_data"; + + bias-pull-up; + drive-strength = <2>; + }; + }; + + pmx-sdc2-clk { + sdc2_clk_on: clk-on { + pins = "sdc2_clk"; + + bias-disable; + drive-strength = <16>; + }; + sdc2_clk_off: clk-off { + pins = "sdc2_clk"; + + bias-disable; + drive-strength = <2>; + }; + }; + + pmx-sdc2-cmd { + sdc2_cmd_on: cmd-on { + pins = "sdc2_cmd"; + + bias-pull-up; + drive-strength = <10>; + }; + sdc2_cmd_off: cmd-off { + pins = "sdc2_cmd"; + + bias-pull-up; + drive-strength = <2>; + }; + }; + + pmx-sdc2-data { + sdc2_data_on: data-on { + pins = "sdc2_data"; + + bias-pull-up; + drive-strength = <10>; + }; + sdc2_data_off: data-off { + pins = "sdc2_data"; + + bias-pull-up; + drive-strength = <2>; + }; + }; + + pmx-sdc2-cd-pin { + sdc2_cd_on: cd-on { + pins = "gpio38"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + sdc2_cd_off: cd-off { + pins = "gpio38"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + }; + + cdc-pdm-lines { + cdc_pdm_lines_act: pdm-lines-on { + pins = "gpio63", "gpio64", "gpio65", "gpio66", + "gpio67", "gpio68"; + function = "cdc_pdm0"; + + drive-strength = <8>; + bias-disable; + }; + cdc_pdm_lines_sus: pdm-lines-off { + pins = "gpio63", "gpio64", "gpio65", "gpio66", + "gpio67", "gpio68"; + function = "cdc_pdm0"; + + drive-strength = <2>; + bias-pull-down; + }; + }; + + ext-pri-tlmm-lines { + ext_pri_tlmm_lines_act: ext-pa-on { + pins = "gpio113", "gpio114", "gpio115", "gpio116"; + function = "pri_mi2s"; + + drive-strength = <8>; + bias-disable; + }; + ext_pri_tlmm_lines_sus: ext-pa-off { + pins = "gpio113", "gpio114", "gpio115", "gpio116"; + function = "pri_mi2s"; + + drive-strength = <2>; + bias-disable; + }; + }; + + ext-pri-ws-line { + ext_pri_ws_act: ext-pa-on { + pins = "gpio110"; + function = "pri_mi2s_ws"; + + drive-strength = <8>; + bias-disable; + }; + ext_pri_ws_sus: ext-pa-off { + pins = "gpio110"; + function = "pri_mi2s_ws"; + + drive-strength = <2>; + bias-disable; + }; + }; + + ext-mclk-tlmm-lines { + ext_mclk_tlmm_lines_act: mclk-lines-on { + pins = "gpio116"; + function = "pri_mi2s"; + + drive-strength = <8>; + bias-disable; + }; + ext_mclk_tlmm_lines_sus: mclk-lines-off { + pins = "gpio116"; + function = "pri_mi2s"; + + drive-strength = <2>; + bias-disable; + }; + }; + + /* secondary Mi2S */ + ext-sec-tlmm-lines { + ext_sec_tlmm_lines_act: tlmm-lines-on { + pins = "gpio112", "gpio117", "gpio118", "gpio119"; + function = "sec_mi2s"; + + drive-strength = <8>; + bias-disable; + }; + ext_sec_tlmm_lines_sus: tlmm-lines-off { + pins = "gpio112", "gpio117", "gpio118", "gpio119"; + function = "sec_mi2s"; + + drive-strength = <2>; + bias-disable; + }; + }; + + cdc-dmic-lines { + cdc_dmic_lines_act: dmic-lines-on { + clk { + pins = "gpio0"; + function = "dmic0_clk"; + + drive-strength = <8>; + }; + data { + pins = "gpio1"; + function = "dmic0_data"; + + drive-strength = <8>; + }; + }; + cdc_dmic_lines_sus: dmic-lines-off { + clk { + pins = "gpio0"; + function = "dmic0_clk"; + + drive-strength = <2>; + bias-disable; + }; + data { + pins = "gpio1"; + function = "dmic0_data"; + + drive-strength = <2>; + bias-disable; + }; + }; + }; + + wcnss_pin_a: wcnss-active { + pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44"; + function = "wcss_wlan"; + + drive-strength = <6>; + bias-pull-up; + }; + + cci0_default: cci0-default { + pins = "gpio29", "gpio30"; + function = "cci_i2c"; + + drive-strength = <16>; + bias-disable; + }; + + camera_front_default: camera-front-default { + pwdn { + pins = "gpio33"; + function = "gpio"; + + drive-strength = <16>; + bias-disable; + }; + rst { + pins = "gpio28"; + function = "gpio"; + + drive-strength = <16>; + bias-disable; + }; + mclk1 { + pins = "gpio27"; + function = "cam_mclk1"; + + drive-strength = <16>; + bias-disable; + }; + }; + + camera_rear_default: camera-rear-default { + pwdn { + pins = "gpio34"; + function = "gpio"; + + drive-strength = <16>; + bias-disable; + }; + rst { + pins = "gpio35"; + function = "gpio"; + + drive-strength = <16>; + bias-disable; + }; + mclk0 { + pins = "gpio26"; + function = "cam_mclk0"; + + drive-strength = <16>; + bias-disable; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi new file mode 100644 index 000000000..539823b2c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi @@ -0,0 +1,76 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include "msm8916.dtsi" +#include "pm8916.dtsi" + +&camss { + vdda-supply = <&pm8916_l2>; +}; + +&dsi0 { + vdda-supply = <&pm8916_l2>; + vddio-supply = <&pm8916_l6>; +}; + +&dsi_phy0 { + vddio-supply = <&pm8916_l6>; +}; + +&mpss { + pll-supply = <&pm8916_l7>; +}; + +&pronto { + vddpx-supply = <&pm8916_l7>; + + iris { + vddxo-supply = <&pm8916_l7>; + vddrfa-supply = <&pm8916_s3>; + vddpa-supply = <&pm8916_l9>; + vdddig-supply = <&pm8916_l5>; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8916_l8>; + vqmmc-supply = <&pm8916_l5>; +}; + +&sdhc_2 { + vmmc-supply = <&pm8916_l11>; + vqmmc-supply = <&pm8916_l12>; +}; + +&usb_hs_phy { + v1p8-supply = <&pm8916_l7>; + v3p3-supply = <&pm8916_l13>; +}; + +&rpm_requests { + smd_rpm_regulators: pm8916-regulators { + compatible = "qcom,rpm-pm8916-regulators"; + + /* pm8916_s1 is managed by rpmpd (MSM8916_VDDCX) */ + pm8916_s3: s3 {}; + pm8916_s4: s4 {}; + + pm8916_l1: l1 {}; + pm8916_l2: l2 {}; + /* pm8916_l3 is managed by rpmpd (MSM8916_VDDMX) */ + pm8916_l4: l4 {}; + pm8916_l5: l5 {}; + pm8916_l6: l6 {}; + pm8916_l7: l7 {}; + pm8916_l8: l8 {}; + pm8916_l9: l9 {}; + pm8916_l10: l10 {}; + pm8916_l11: l11 {}; + pm8916_l12: l12 {}; + pm8916_l13: l13 {}; + pm8916_l14: l14 {}; + pm8916_l15: l15 {}; + pm8916_l16: l16 {}; + pm8916_l17: l17 {}; + pm8916_l18: l18 {}; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi new file mode 100644 index 000000000..3255bd3fc --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi @@ -0,0 +1,482 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include "msm8916-pm8916.dtsi" +#include +#include +#include +#include + +/ { + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + reserved-memory { + /* Additional memory used by Samsung firmware modifications */ + tz-apps@85500000 { + reg = <0x0 0x85500000 0x0 0xb00000>; + no-map; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default>; + + label = "GPIO Buttons"; + + button-volume-up { + label = "Volume Up"; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + button-home { + label = "Home"; + gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + gpio-hall-sensor { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_hall_sensor_default>; + + label = "GPIO Hall Effect Sensor"; + + event-hall-sensor { + label = "Hall Effect Sensor"; + gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>; + linux,input-type = ; + linux,code = ; + linux,can-disable; + }; + }; + + reg_vdd_tsp_a: regulator-vdd-tsp-a { + compatible = "regulator-fixed"; + regulator-name = "vdd_tsp_a"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&tsp_en_default>; + }; + + i2c-muic { + compatible = "i2c-gpio"; + sda-gpios = <&msmgpio 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&msmgpio 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + + pinctrl-names = "default"; + pinctrl-0 = <&muic_i2c_default>; + + #address-cells = <1>; + #size-cells = <0>; + + muic: extcon@25 { + compatible = "siliconmitus,sm5502-muic"; + + reg = <0x25>; + interrupt-parent = <&msmgpio>; + interrupts = <12 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&muic_int_default>; + }; + }; + + i2c-tkey { + compatible = "i2c-gpio"; + sda-gpios = <&msmgpio 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&msmgpio 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + + pinctrl-names = "default"; + pinctrl-0 = <&tkey_i2c_default>; + + #address-cells = <1>; + #size-cells = <0>; + + touchkey: touchkey@20 { + /* Note: Actually an ABOV MCU that implements same interface */ + compatible = "coreriver,tc360-touchkey"; + reg = <0x20>; + + interrupt-parent = <&msmgpio>; + interrupts = <98 IRQ_TYPE_EDGE_FALLING>; + + /* vcc/vdd-supply are board-specific */ + vddio-supply = <&pm8916_l6>; + + linux,keycodes = ; + + pinctrl-names = "default"; + pinctrl-0 = <&tkey_default>; + }; + }; + + i2c-nfc { + compatible = "i2c-gpio"; + sda-gpios = <&msmgpio 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&msmgpio 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + + pinctrl-names = "default"; + pinctrl-0 = <&nfc_i2c_default>; + + #address-cells = <1>; + #size-cells = <0>; + + nfc@27 { + compatible = "samsung,s3fwrn5-i2c"; + reg = <0x27>; + + interrupt-parent = <&msmgpio>; + interrupts = <21 IRQ_TYPE_EDGE_RISING>; + + en-gpios = <&msmgpio 20 GPIO_ACTIVE_HIGH>; + wake-gpios = <&msmgpio 49 GPIO_ACTIVE_HIGH>; + + clocks = <&rpmcc RPM_SMD_BB_CLK2_PIN>; + + pinctrl-names = "default"; + pinctrl-0 = <&nfc_default &nfc_clk_req>; + }; + }; +}; + +&blsp_i2c2 { + status = "okay"; + + accelerometer: accelerometer@10 { + compatible = "bosch,bmc150_accel"; + reg = <0x10>; + interrupt-parent = <&msmgpio>; + interrupts = <115 IRQ_TYPE_EDGE_RISING>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l5>; + + pinctrl-names = "default"; + pinctrl-0 = <&accel_int_default>; + }; + + magnetometer@12 { + compatible = "bosch,bmc150_magn"; + reg = <0x12>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l5>; + }; +}; + +&blsp_i2c4 { + status = "okay"; + + battery@35 { + compatible = "richtek,rt5033-battery"; + reg = <0x35>; + interrupt-parent = <&msmgpio>; + interrupts = <121 IRQ_TYPE_EDGE_BOTH>; + + pinctrl-names = "default"; + pinctrl-0 = <&fg_alert_default>; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&dsi0 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mdss_default>; + pinctrl-1 = <&mdss_sleep>; +}; + +&mdss { + status = "okay"; +}; + +&pm8916_resin { + status = "okay"; + linux,code = ; +}; + +&pronto { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; +}; + +&usb { + status = "okay"; + extcon = <&muic>, <&muic>; +}; + +&usb_hs_phy { + extcon = <&muic>; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2800000>; + }; + + l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +&msmgpio { + accel_int_default: accel-int-default { + pins = "gpio115"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + fg_alert_default: fg-alert-default { + pins = "gpio121"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + gpio_keys_default: gpio-keys-default { + pins = "gpio107", "gpio109"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + + gpio_hall_sensor_default: gpio-hall-sensor-default { + pins = "gpio52"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + mdss { + mdss_default: mdss-default { + pins = "gpio25"; + function = "gpio"; + + drive-strength = <8>; + bias-disable; + }; + mdss_sleep: mdss-sleep { + pins = "gpio25"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; + }; + }; + + muic_i2c_default: muic-i2c-default { + pins = "gpio105", "gpio106"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + muic_int_default: muic-int-default { + pins = "gpio12"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + nfc_default: nfc-default { + pins = "gpio20", "gpio49"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + + irq { + pins = "gpio21"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; + }; + }; + + nfc_i2c_default: nfc-i2c-default { + pins = "gpio0", "gpio1"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + tkey_default: tkey-default { + pins = "gpio98"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + tkey_i2c_default: tkey-i2c-default { + pins = "gpio16", "gpio17"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + tsp_en_default: tsp-en-default { + pins = "gpio73"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + ts_int_default: ts-int-default { + pins = "gpio13"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; +}; + +&pm8916_gpios { + nfc_clk_req: nfc-clk-req-state { + pins = "gpio2"; + function = "func1"; + + input-enable; + bias-disable; + power-source = ; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts new file mode 100644 index 000000000..6db5f78ca --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts @@ -0,0 +1,131 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-samsung-a2015-common.dtsi" + +/ { + model = "Samsung Galaxy A3U (EUR)"; + compatible = "samsung,a3u-eur", "qcom,msm8916"; + chassis-type = "handset"; + + reg_panel_vdd3: regulator-panel-vdd3 { + compatible = "regulator-fixed"; + regulator-name = "panel_vdd3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&msmgpio 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&panel_vdd3_default>; + }; + + reg_touch_key: regulator-touch-key { + compatible = "regulator-fixed"; + regulator-name = "touch_key"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + + gpio = <&msmgpio 86 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&tkey_en_default>; + }; + + reg_key_led: regulator-key-led { + compatible = "regulator-fixed"; + regulator-name = "key_led"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&msmgpio 60 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&tkey_led_en_default>; + }; +}; + +&touchkey { + vcc-supply = <®_touch_key>; + vdd-supply = <®_key_led>; +}; + +&accelerometer { + mount-matrix = "0", "1", "0", + "1", "0", "0", + "0", "0", "1"; +}; + +&blsp_i2c5 { + status = "okay"; + + touchscreen@20 { + compatible = "zinitix,bt541"; + + reg = <0x20>; + interrupt-parent = <&msmgpio>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + + touchscreen-size-x = <540>; + touchscreen-size-y = <960>; + + vcca-supply = <®_vdd_tsp_a>; + vdd-supply = <&pm8916_l6>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_default>; + }; +}; + +&dsi0 { + panel@0 { + reg = <0>; + + compatible = "samsung,s6e88a0-ams452ef01"; + + vdd3-supply = <®_panel_vdd3>; + vci-supply = <&pm8916_l17>; + reset-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; +}; + +&dsi0_out { + data-lanes = <0 1>; + remote-endpoint = <&panel_in>; +}; + +&msmgpio { + panel_vdd3_default: panel-vdd3-default { + pins = "gpio9"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + tkey_en_default: tkey-en-default { + pins = "gpio86"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + tkey_led_en_default: tkey-led-en-default { + pins = "gpio60"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts new file mode 100644 index 000000000..5fb8ecd0c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts @@ -0,0 +1,72 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-samsung-a2015-common.dtsi" + +/ { + model = "Samsung Galaxy A5U (EUR)"; + compatible = "samsung,a5u-eur", "qcom,msm8916"; + chassis-type = "handset"; + + reg_touch_key: regulator-touch-key { + compatible = "regulator-fixed"; + regulator-name = "touch_key"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&msmgpio 97 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&tkey_en_default>; + }; +}; + +&accelerometer { + mount-matrix = "-1", "0", "0", + "0", "1", "0", + "0", "0", "1"; +}; + +&blsp_i2c5 { + status = "okay"; + + touchscreen@48 { + compatible = "melfas,mms345l"; + + reg = <0x48>; + interrupt-parent = <&msmgpio>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + + touchscreen-size-x = <720>; + touchscreen-size-y = <1280>; + + avdd-supply = <®_vdd_tsp_a>; + vdd-supply = <&pm8916_l6>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_default>; + }; +}; + +&pronto { + iris { + compatible = "qcom,wcn3660b"; + }; +}; + +&touchkey { + vcc-supply = <®_touch_key>; + vdd-supply = <®_touch_key>; +}; + +&msmgpio { + tkey_en_default: tkey-en-default { + pins = "gpio97"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi new file mode 100644 index 000000000..542010fdf --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi @@ -0,0 +1,85 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include "msm8916-samsung-a2015-common.dtsi" + +/ { + haptic { + compatible = "regulator-haptic"; + haptic-supply = <®_motor_vdd>; + min-microvolt = <3300000>; + max-microvolt = <3300000>; + }; + + i2c-muic { + /* SM5504 MUIC instead of SM5502 */ + /delete-node/ extcon@25; + + muic: extcon@14 { + compatible = "siliconmitus,sm5504-muic"; + reg = <0x14>; + + interrupt-parent = <&msmgpio>; + interrupts = <12 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&muic_int_default>; + }; + }; + + reg_motor_vdd: regulator-motor-vdd { + compatible = "regulator-fixed"; + regulator-name = "motor_vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&msmgpio 76 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&motor_en_default>; + }; + + reg_touch_key: regulator-touch-key { + compatible = "regulator-fixed"; + regulator-name = "touch_key"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&msmgpio 97 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&tkey_en_default>; + }; +}; + +&blsp_i2c2 { + /* lis2hh12 accelerometer instead of BMC150 */ + status = "disabled"; + + /delete-node/ accelerometer@10; + /delete-node/ magnetometer@12; +}; + +&touchkey { + vcc-supply = <®_touch_key>; + vdd-supply = <®_touch_key>; +}; + +&msmgpio { + motor_en_default: motor-en-default { + pins = "gpio76"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + tkey_en_default: tkey-en-default { + pins = "gpio97"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-e5.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-e5.dts new file mode 100644 index 000000000..777eb934e --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-e5.dts @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-samsung-e2015-common.dtsi" + +/* + * NOTE: The original firmware from Samsung can only boot ARM32 kernels on some + * variants. + * Unfortunately, the firmware is signed and cannot be replaced easily. + * There seems to be no way to boot ARM64 kernels on 32-bit devices at the + * moment, even though the hardware would support it. + * + * However, it is possible to use this device tree by compiling an ARM32 kernel + * instead. For clarity and build testing this device tree is maintained next + * to the other MSM8916 device trees. However, it is actually used through + * arch/arm/boot/dts/qcom-msm8916-samsung-e5.dts + */ + +/ { + model = "Samsung Galaxy E5"; + compatible = "samsung,e5", "qcom,msm8916"; + chassis-type = "handset"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-e7.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-e7.dts new file mode 100644 index 000000000..b412b61ca --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-e7.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-samsung-e2015-common.dtsi" + +/* + * NOTE: The original firmware from Samsung can only boot ARM32 kernels on some + * variants. + * Unfortunately, the firmware is signed and cannot be replaced easily. + * There seems to be no way to boot ARM64 kernels on 32-bit devices at the + * moment, even though the hardware would support it. + * + * However, it is possible to use this device tree by compiling an ARM32 kernel + * instead. For clarity and build testing this device tree is maintained next + * to the other MSM8916 device trees. However, it is actually used through + * arch/arm/boot/dts/qcom-msm8916-samsung-e7.dts + */ + +/ { + model = "Samsung Galaxy E7"; + compatible = "samsung,e7", "qcom,msm8916"; + chassis-type = "handset"; +}; + +&pm8916_l17 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts new file mode 100644 index 000000000..bc7134698 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts @@ -0,0 +1,60 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-samsung-e2015-common.dtsi" +#include + +/* + * NOTE: The original firmware from Samsung can only boot ARM32 kernels on some + * variants. + * Unfortunately, the firmware is signed and cannot be replaced easily. + * There seems to be no way to boot ARM64 kernels on 32-bit devices at the + * moment, even though the hardware would support it. + * + * However, it is possible to use this device tree by compiling an ARM32 kernel + * instead. For clarity and build testing this device tree is maintained next + * to the other MSM8916 device trees. However, it is actually used through + * arch/arm/boot/dts/qcom-msm8916-samsung-grandmax.dts + */ + +/ { + model = "Samsung Galaxy Grand Max"; + compatible = "samsung,grandmax", "qcom,msm8916"; + chassis-type = "handset"; + + /delete-node/ gpio-hall-sensor; + /delete-node/ i2c-nfc; + /delete-node/ i2c-tkey; + + gpio-leds { + compatible = "gpio-leds"; + keyled { + gpios = <&msmgpio 60 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_leds_default>; + }; + }; +}; + +®_motor_vdd { + gpio = <&msmgpio 72 GPIO_ACTIVE_HIGH>; +}; + +®_touch_key { + status = "disabled"; +}; + +&msmgpio { + gpio_leds_default: gpio-led-default { + pins = "gpio60"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; +}; + +&motor_en_default { + pins = "gpio72"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts new file mode 100644 index 000000000..eabeed18c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts @@ -0,0 +1,209 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-pm8916.dtsi" +#include + +/ { + model = "Samsung Galaxy J5 (2015)"; + compatible = "samsung,j5", "qcom,msm8916"; + chassis-type = "handset"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + reserved-memory { + /* Additional memory used by Samsung firmware modifications */ + tz-apps@85500000 { + reg = <0x0 0x85500000 0x0 0xb00000>; + no-map; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default>; + + label = "GPIO Buttons"; + + button-volume-up { + label = "Volume Up"; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + button-home { + label = "Home Key"; + gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&pm8916_resin { + status = "okay"; + linux,code = ; +}; + +/* FIXME: Replace with SM5703 MUIC when driver is available */ +&pm8916_usbin { + status = "okay"; +}; + +&pronto { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; +}; + +&usb { + status = "okay"; + dr_mode = "peripheral"; + extcon = <&pm8916_usbin>; +}; + +&usb_hs_phy { + extcon = <&pm8916_usbin>; + qcom,init-seq = /bits/ 8 <0x1 0x19 0x2 0x0b>; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2800000>; + }; + + l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l17 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +&msmgpio { + gpio_keys_default: gpio-keys-default { + pins = "gpio107", "gpio109"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts new file mode 100644 index 000000000..bbd6bb3f4 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts @@ -0,0 +1,544 @@ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright (C) 2019 Stephan Gerhold + +/dts-v1/; + +#include "msm8916-pm8916.dtsi" +#include +#include +#include + +/* + * NOTE: The original firmware from Samsung can only boot ARM32 kernels. + * Unfortunately, the firmware is signed and cannot be replaced easily. + * There seems to be no way to boot ARM64 kernels on this device at the moment, + * even though the hardware would support it. + * + * However, it is possible to use this device tree by compiling an ARM32 kernel + * instead. For clarity and build testing this device tree is maintained next + * to the other MSM8916 device trees. However, it is actually used through + * arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dts + */ + +/ { + model = "Samsung Galaxy S4 Mini Value Edition"; + compatible = "samsung,serranove", "qcom,msm8916"; + chassis-type = "handset"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + reserved-memory { + /* Additional memory used by Samsung firmware modifications */ + tz-apps@85500000 { + reg = <0x0 0x85500000 0x0 0xb00000>; + no-map; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default>; + + label = "GPIO Buttons"; + + button-volume-up { + label = "Volume Up"; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + button-home { + label = "Home"; + gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + gpio-hall-sensor { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_hall_sensor_default>; + + label = "GPIO Hall Effect Sensor"; + + event-hall-sensor { + label = "Hall Effect Sensor"; + gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>; + linux,input-type = ; + linux,code = ; + linux,can-disable; + }; + }; + + reg_vdd_tsp: regulator-vdd-tsp { + compatible = "regulator-fixed"; + regulator-name = "vdd_tsp"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&tsp_en_default>; + }; + + reg_touch_key: regulator-touch-key { + compatible = "regulator-fixed"; + regulator-name = "touch_key"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + + gpio = <&msmgpio 86 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&tkey_en_default>; + }; + + reg_key_led: regulator-key-led { + compatible = "regulator-fixed"; + regulator-name = "key_led"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&msmgpio 60 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&tkey_led_en_default>; + }; + + i2c-muic { + compatible = "i2c-gpio"; + sda-gpios = <&msmgpio 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&msmgpio 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + + pinctrl-names = "default"; + pinctrl-0 = <&muic_i2c_default>; + + #address-cells = <1>; + #size-cells = <0>; + + muic: extcon@14 { + compatible = "siliconmitus,sm5504-muic"; + reg = <0x14>; + + interrupt-parent = <&msmgpio>; + interrupts = <12 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&muic_irq_default>; + }; + }; + + i2c-tkey { + compatible = "i2c-gpio"; + sda-gpios = <&msmgpio 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&msmgpio 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + + pinctrl-names = "default"; + pinctrl-0 = <&tkey_i2c_default>; + + #address-cells = <1>; + #size-cells = <0>; + + touchkey@20 { + compatible = "coreriver,tc360-touchkey"; + reg = <0x20>; + + interrupt-parent = <&msmgpio>; + interrupts = <98 IRQ_TYPE_EDGE_FALLING>; + + vcc-supply = <®_touch_key>; + vdd-supply = <®_key_led>; + vddio-supply = <&pm8916_l6>; + + linux,keycodes = ; + + pinctrl-names = "default"; + pinctrl-0 = <&tkey_default>; + }; + }; + + i2c-nfc { + compatible = "i2c-gpio"; + sda-gpios = <&msmgpio 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&msmgpio 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + + pinctrl-names = "default"; + pinctrl-0 = <&nfc_i2c_default>; + + #address-cells = <1>; + #size-cells = <0>; + + nfc@2b { + compatible = "nxp,pn547", "nxp,nxp-nci-i2c"; + reg = <0x2b>; + + interrupt-parent = <&msmgpio>; + interrupts = <21 IRQ_TYPE_EDGE_RISING>; + + enable-gpios = <&msmgpio 20 GPIO_ACTIVE_HIGH>; + firmware-gpios = <&msmgpio 49 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&nfc_default>; + }; + }; +}; + +&blsp_i2c2 { + status = "okay"; + + imu@6b { + compatible = "st,lsm6ds3"; + reg = <0x6b>; + + interrupt-parent = <&msmgpio>; + interrupts = <115 IRQ_TYPE_EDGE_RISING>; + + pinctrl-names = "default"; + pinctrl-0 = <&imu_irq_default>; + }; + + magnetometer@2e { + compatible = "yamaha,yas537"; + reg = <0x2e>; + + mount-matrix = "0", "1", "0", + "1", "0", "0", + "0", "0", "-1"; + }; +}; + +&blsp_i2c4 { + status = "okay"; + + battery@35 { + compatible = "richtek,rt5033-battery"; + reg = <0x35>; + + interrupt-parent = <&msmgpio>; + interrupts = <121 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&fg_alert_default>; + }; +}; + +&blsp_i2c5 { + status = "okay"; + + touchscreen@20 { + compatible = "zinitix,bt541"; + reg = <0x20>; + + interrupt-parent = <&msmgpio>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + + touchscreen-size-x = <540>; + touchscreen-size-y = <960>; + + vdd-supply = <®_vdd_tsp>; + vddo-supply = <&pm8916_l6>; + + pinctrl-names = "default"; + pinctrl-0 = <&tsp_irq_default>; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&pm8916_resin { + status = "okay"; + linux,code = ; +}; + +&pm8916_vib { + status = "okay"; +}; + +&pronto { + status = "okay"; + + iris { + compatible = "qcom,wcn3660b"; + }; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; + + non-removable; + + /* + * FIXME: Disable UHS-I modes since tuning fails with: + * + * sdhci_msm 7864900.sdhci: mmc1: No tuning point found + * mmc1: tuning execution failed: -5 + * mmc1: error -5 whilst initialising SD card + * + * This is the quirk used on downstream, which suggests this is + * a hardware limitation. However, probing a card using DDR50 works + * (without tuning), so maybe only tuning is broken? + */ + no-1-8-v; +}; + +&usb { + status = "okay"; + extcon = <&muic>, <&muic>; +}; + +&usb_hs_phy { + extcon = <&muic>; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2800000>; + }; + + l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +&msmgpio { + fg_alert_default: fg-alert-default { + pins = "gpio121"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + gpio_keys_default: gpio-keys-default { + pins = "gpio107", "gpio109"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + + gpio_hall_sensor_default: gpio-hall-sensor-default { + pins = "gpio52"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + imu_irq_default: imu-irq-default { + pins = "gpio115"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + muic_i2c_default: muic-i2c-default { + pins = "gpio105", "gpio106"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + muic_irq_default: muic-irq-default { + pins = "gpio12"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + nfc_default: nfc-default { + pins = "gpio20", "gpio49"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + + irq { + pins = "gpio21"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; + }; + }; + + nfc_i2c_default: nfc-i2c-default { + pins = "gpio0", "gpio1"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + tkey_default: tkey-default { + pins = "gpio98"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + tkey_en_default: tkey-en-default { + pins = "gpio86"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + tkey_i2c_default: tkey-i2c-default { + pins = "gpio16", "gpio17"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + tkey_led_en_default: tkey-led-en-default { + pins = "gpio60"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + tsp_en_default: tsp-en-default { + pins = "gpio73"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + tsp_irq_default: tsp-irq-default { + pins = "gpio13"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts new file mode 100644 index 000000000..84a352dcf --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts @@ -0,0 +1,314 @@ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright (C) 2020 Stephan Gerhold + +/dts-v1/; + +#include "msm8916-pm8916.dtsi" +#include +#include +#include + +/ { + model = "Xiaomi Redmi 2 (Wingtech WT88047)"; + compatible = "wingtech,wt88047", "qcom,msm8916"; + chassis-type = "handset"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default>; + + label = "GPIO Buttons"; + + button-volume-up { + label = "Volume Up"; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&msmgpio 110 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_id_default>; + }; +}; + +&blsp_i2c2 { + status = "okay"; + + imu@68 { + compatible = "invensense,mpu6880"; + reg = <0x68>; + + interrupt-parent = <&msmgpio>; + interrupts = <115 IRQ_TYPE_EDGE_RISING>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + + pinctrl-names = "default"; + pinctrl-0 = <&imu_default>; + + mount-matrix = "1", "0", "0", + "0", "-1", "0", + "0", "0", "1"; + }; +}; + +&blsp_i2c5 { + status = "okay"; + + touchscreen@38 { + /* Likely some other model but works just fine with this one */ + compatible = "edt,edt-ft5506"; + reg = <0x38>; + + interrupt-parent = <&msmgpio>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + + reset-gpios = <&msmgpio 12 GPIO_ACTIVE_LOW>; + + vcc-supply = <&pm8916_l17>; + iovcc-supply = <&pm8916_l6>; + + touchscreen-size-x = <720>; + touchscreen-size-y = <1280>; + + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen_default>; + }; +}; + +&blsp_i2c6 { + status = "okay"; + + led-controller@45 { + compatible = "awinic,aw2013"; + reg = <0x45>; + #address-cells = <1>; + #size-cells = <0>; + + vcc-supply = <&pm8916_l16>; + + led@0 { + reg = <0>; + led-max-microamp = <15000>; + function = LED_FUNCTION_INDICATOR; + color = ; + }; + + led@1 { + reg = <1>; + led-max-microamp = <15000>; + function = LED_FUNCTION_INDICATOR; + color = ; + }; + + led@2 { + reg = <2>; + led-max-microamp = <15000>; + function = LED_FUNCTION_INDICATOR; + color = ; + }; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&pm8916_resin { + status = "okay"; + linux,code = ; +}; + +&pm8916_vib { + status = "okay"; +}; + +&pronto { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; + + non-removable; +}; + +&usb { + status = "okay"; + extcon = <&usb_id>, <&usb_id>; +}; + +&usb_hs_phy { + extcon = <&usb_id>; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2800000>; + }; + + l11 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l16 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3300000>; + }; + + l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +&msmgpio { + gpio_keys_default: gpio-keys-default { + pins = "gpio107"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + + imu_default: imu-default { + pins = "gpio115"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + touchscreen_default: touchscreen-default { + pins = "gpio13"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + + reset { + pins = "gpio12"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + }; + + usb_id_default: usb-id-default { + pins = "gpio110"; + function = "gpio"; + + drive-strength = <8>; + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi new file mode 100644 index 000000000..bafac2cf7 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -0,0 +1,2111 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + aliases { + mmc0 = &sdhc_1; /* SDC1 eMMC slot */ + mmc1 = &sdhc_2; /* SDC2 SD card slot */ + }; + + chosen { }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the reg */ + reg = <0 0x80000000 0 0>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + tz-apps@86000000 { + reg = <0x0 0x86000000 0x0 0x300000>; + no-map; + }; + + smem@86300000 { + compatible = "qcom,smem"; + reg = <0x0 0x86300000 0x0 0x100000>; + no-map; + + hwlocks = <&tcsr_mutex 3>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + }; + + hypervisor@86400000 { + reg = <0x0 0x86400000 0x0 0x100000>; + no-map; + }; + + tz@86500000 { + reg = <0x0 0x86500000 0x0 0x180000>; + no-map; + }; + + reserved@86680000 { + reg = <0x0 0x86680000 0x0 0x80000>; + no-map; + }; + + rmtfs@86700000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x86700000 0x0 0xe0000>; + no-map; + + qcom,client-id = <1>; + }; + + rfsa@867e0000 { + reg = <0x0 0x867e0000 0x0 0x20000>; + no-map; + }; + + mpss_mem: mpss@86800000 { + reg = <0x0 0x86800000 0x0 0x2b00000>; + no-map; + }; + + wcnss_mem: wcnss@89300000 { + reg = <0x0 0x89300000 0x0 0x600000>; + no-map; + }; + + venus_mem: venus@89900000 { + reg = <0x0 0x89900000 0x0 0x600000>; + no-map; + }; + + mba_mem: mba@8ea00000 { + no-map; + reg = <0 0x8ea00000 0 0x100000>; + }; + }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + clocks = <&apcs>; + operating-points-v2 = <&cpu_opp_table>; + #cooling-cells = <2>; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; + qcom,acc = <&cpu0_acc>; + qcom,saw = <&cpu0_saw>; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + clocks = <&apcs>; + operating-points-v2 = <&cpu_opp_table>; + #cooling-cells = <2>; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; + qcom,acc = <&cpu1_acc>; + qcom,saw = <&cpu1_saw>; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x2>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + clocks = <&apcs>; + operating-points-v2 = <&cpu_opp_table>; + #cooling-cells = <2>; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; + qcom,acc = <&cpu2_acc>; + qcom,saw = <&cpu2_saw>; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x3>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + clocks = <&apcs>; + operating-points-v2 = <&cpu_opp_table>; + #cooling-cells = <2>; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; + qcom,acc = <&cpu3_acc>; + qcom,saw = <&cpu3_saw>; + }; + + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + + idle-states { + entry-method = "psci"; + + CPU_SLEEP_0: cpu-sleep-0 { + compatible = "arm,idle-state"; + idle-state-name = "standalone-power-collapse"; + arm,psci-suspend-param = <0x40000002>; + entry-latency-us = <130>; + exit-latency-us = <150>; + min-residency-us = <2000>; + local-timer-stop; + }; + }; + + domain-idle-states { + + CLUSTER_RET: cluster-retention { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41000012>; + entry-latency-us = <500>; + exit-latency-us = <500>; + min-residency-us = <2000>; + }; + + CLUSTER_PWRDN: cluster-gdhs { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41000032>; + entry-latency-us = <2000>; + exit-latency-us = <2000>; + min-residency-us = <6000>; + }; + }; + }; + + cpu_opp_table: opp-table-cpu { + compatible = "operating-points-v2"; + opp-shared; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + }; + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + }; + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + }; + opp-998400000 { + opp-hz = /bits/ 64 <998400000>; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-msm8916", "qcom,scm"; + clocks = <&gcc GCC_CRYPTO_CLK>, + <&gcc GCC_CRYPTO_AXI_CLK>, + <&gcc GCC_CRYPTO_AHB_CLK>; + clock-names = "core", "bus", "iface"; + #reset-cells = <1>; + + qcom,dload-mode = <&tcsr 0x6100>; + }; + }; + + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = ; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + + CPU_PD0: power-domain-cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&CPU_SLEEP_0>; + }; + + CPU_PD1: power-domain-cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&CPU_SLEEP_0>; + }; + + CPU_PD2: power-domain-cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&CPU_SLEEP_0>; + }; + + CPU_PD3: power-domain-cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&CPU_SLEEP_0>; + }; + + CLUSTER_PD: power-domain-cluster { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_RET>, <&CLUSTER_PWRDN>; + }; + }; + + smd { + compatible = "qcom,smd"; + + rpm { + interrupts = ; + qcom,ipc = <&apcs 8 0>; + qcom,smd-edge = <15>; + + rpm_requests: rpm-requests { + compatible = "qcom,rpm-msm8916"; + qcom,smd-channels = "rpm_requests"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc"; + #clock-cells = <1>; + clocks = <&xo_board>; + clock-names = "xo"; + }; + + rpmpd: power-controller { + compatible = "qcom,msm8916-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp_ret: opp1 { + opp-level = <1>; + }; + rpmpd_opp_svs_krait: opp2 { + opp-level = <2>; + }; + rpmpd_opp_svs_soc: opp3 { + opp-level = <3>; + }; + rpmpd_opp_nom: opp4 { + opp-level = <4>; + }; + rpmpd_opp_turbo: opp5 { + opp-level = <5>; + }; + rpmpd_opp_super_turbo: opp6 { + opp-level = <6>; + }; + }; + }; + }; + }; + }; + + smp2p-hexagon { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + + interrupts = ; + + qcom,ipc = <&apcs 8 14>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + hexagon_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + + #qcom,smem-state-cells = <1>; + }; + + hexagon_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-wcnss { + compatible = "qcom,smp2p"; + qcom,smem = <451>, <431>; + + interrupts = ; + + qcom,ipc = <&apcs 8 18>; + + qcom,local-pid = <0>; + qcom,remote-pid = <4>; + + wcnss_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + + #qcom,smem-state-cells = <1>; + }; + + wcnss_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smsm { + compatible = "qcom,smsm"; + + #address-cells = <1>; + #size-cells = <0>; + + qcom,ipc-1 = <&apcs 8 13>; + qcom,ipc-3 = <&apcs 8 19>; + + apps_smsm: apps@0 { + reg = <0>; + + #qcom,smem-state-cells = <1>; + }; + + hexagon_smsm: hexagon@1 { + reg = <1>; + interrupts = ; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + wcnss_smsm: wcnss@6 { + reg = <6>; + interrupts = ; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc@0 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + compatible = "simple-bus"; + + rng@22000 { + compatible = "qcom,prng"; + reg = <0x00022000 0x200>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; + + restart@4ab000 { + compatible = "qcom,pshold"; + reg = <0x004ab000 0x4>; + }; + + qfprom: qfprom@5c000 { + compatible = "qcom,msm8916-qfprom", "qcom,qfprom"; + reg = <0x0005c000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + tsens_caldata: caldata@d0 { + reg = <0xd0 0x8>; + }; + tsens_calsel: calsel@ec { + reg = <0xec 0x4>; + }; + }; + + rpm_msg_ram: sram@60000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0x00060000 0x8000>; + }; + + sram@290000 { + compatible = "qcom,msm8916-rpm-stats"; + reg = <0x00290000 0x10000>; + }; + + bimc: interconnect@400000 { + compatible = "qcom,msm8916-bimc"; + reg = <0x00400000 0x62000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_BIMC_CLK>, + <&rpmcc RPM_SMD_BIMC_A_CLK>; + }; + + tsens: thermal-sensor@4a9000 { + compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1"; + reg = <0x004a9000 0x1000>, /* TM */ + <0x004a8000 0x1000>; /* SROT */ + nvmem-cells = <&tsens_caldata>, <&tsens_calsel>; + nvmem-cell-names = "calib", "calib_sel"; + #qcom,sensors = <5>; + interrupts = ; + interrupt-names = "uplow"; + #thermal-sensor-cells = <1>; + }; + + pcnoc: interconnect@500000 { + compatible = "qcom,msm8916-pcnoc"; + reg = <0x00500000 0x11000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_PCNOC_CLK>, + <&rpmcc RPM_SMD_PCNOC_A_CLK>; + }; + + snoc: interconnect@580000 { + compatible = "qcom,msm8916-snoc"; + reg = <0x00580000 0x14000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_SNOC_CLK>, + <&rpmcc RPM_SMD_SNOC_A_CLK>; + }; + + stm: stm@802000 { + compatible = "arm,coresight-stm", "arm,primecell"; + reg = <0x00802000 0x1000>, + <0x09280000 0x180000>; + reg-names = "stm-base", "stm-stimulus-base"; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + status = "disabled"; + + out-ports { + port { + stm_out: endpoint { + remote-endpoint = <&funnel0_in7>; + }; + }; + }; + }; + + /* System CTIs */ + /* CTI 0 - TMC connections */ + cti0: cti@810000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x00810000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + /* CTI 1 - TPIU connections */ + cti1: cti@811000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x00811000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + /* CTIs 2-11 - no information - not instantiated */ + + tpiu: tpiu@820000 { + compatible = "arm,coresight-tpiu", "arm,primecell"; + reg = <0x00820000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + status = "disabled"; + + in-ports { + port { + tpiu_in: endpoint { + remote-endpoint = <&replicator_out1>; + }; + }; + }; + }; + + funnel0: funnel@821000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x00821000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + status = "disabled"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + /* + * Not described input ports: + * 0 - connected to Resource and Power Manger CPU ETM + * 1 - not-connected + * 2 - connected to Modem CPU ETM + * 3 - not-connected + * 5 - not-connected + * 6 - connected trought funnel to Wireless CPU ETM + * 7 - connected to STM component + */ + + port@4 { + reg = <4>; + funnel0_in4: endpoint { + remote-endpoint = <&funnel1_out>; + }; + }; + + port@7 { + reg = <7>; + funnel0_in7: endpoint { + remote-endpoint = <&stm_out>; + }; + }; + }; + + out-ports { + port { + funnel0_out: endpoint { + remote-endpoint = <&etf_in>; + }; + }; + }; + }; + + replicator: replicator@824000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0x00824000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + status = "disabled"; + + out-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + replicator_out0: endpoint { + remote-endpoint = <&etr_in>; + }; + }; + port@1 { + reg = <1>; + replicator_out1: endpoint { + remote-endpoint = <&tpiu_in>; + }; + }; + }; + + in-ports { + port { + replicator_in: endpoint { + remote-endpoint = <&etf_out>; + }; + }; + }; + }; + + etf: etf@825000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x00825000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + status = "disabled"; + + in-ports { + port { + etf_in: endpoint { + remote-endpoint = <&funnel0_out>; + }; + }; + }; + + out-ports { + port { + etf_out: endpoint { + remote-endpoint = <&replicator_in>; + }; + }; + }; + }; + + etr: etr@826000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x00826000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + status = "disabled"; + + in-ports { + port { + etr_in: endpoint { + remote-endpoint = <&replicator_out0>; + }; + }; + }; + }; + + funnel1: funnel@841000 { /* APSS funnel only 4 inputs are used */ + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x00841000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + status = "disabled"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + funnel1_in0: endpoint { + remote-endpoint = <&etm0_out>; + }; + }; + port@1 { + reg = <1>; + funnel1_in1: endpoint { + remote-endpoint = <&etm1_out>; + }; + }; + port@2 { + reg = <2>; + funnel1_in2: endpoint { + remote-endpoint = <&etm2_out>; + }; + }; + port@3 { + reg = <3>; + funnel1_in3: endpoint { + remote-endpoint = <&etm3_out>; + }; + }; + }; + + out-ports { + port { + funnel1_out: endpoint { + remote-endpoint = <&funnel0_in4>; + }; + }; + }; + }; + + debug0: debug@850000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x00850000 0x1000>; + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + cpu = <&CPU0>; + status = "disabled"; + }; + + debug1: debug@852000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x00852000 0x1000>; + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + cpu = <&CPU1>; + status = "disabled"; + }; + + debug2: debug@854000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x00854000 0x1000>; + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + cpu = <&CPU2>; + status = "disabled"; + }; + + debug3: debug@856000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x00856000 0x1000>; + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + cpu = <&CPU3>; + status = "disabled"; + }; + + /* Core CTIs; CTIs 12-15 */ + /* CTI - CPU-0 */ + cti12: cti@858000 { + compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", + "arm,primecell"; + reg = <0x00858000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU0>; + arm,cs-dev-assoc = <&etm0>; + + status = "disabled"; + }; + + /* CTI - CPU-1 */ + cti13: cti@859000 { + compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", + "arm,primecell"; + reg = <0x00859000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU1>; + arm,cs-dev-assoc = <&etm1>; + + status = "disabled"; + }; + + /* CTI - CPU-2 */ + cti14: cti@85a000 { + compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", + "arm,primecell"; + reg = <0x0085a000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU2>; + arm,cs-dev-assoc = <&etm2>; + + status = "disabled"; + }; + + /* CTI - CPU-3 */ + cti15: cti@85b000 { + compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", + "arm,primecell"; + reg = <0x0085b000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU3>; + arm,cs-dev-assoc = <&etm3>; + + status = "disabled"; + }; + + etm0: etm@85c000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x0085c000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + arm,coresight-loses-context-with-cpu; + + cpu = <&CPU0>; + + status = "disabled"; + + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = <&funnel1_in0>; + }; + }; + }; + }; + + etm1: etm@85d000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x0085d000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + arm,coresight-loses-context-with-cpu; + + cpu = <&CPU1>; + + status = "disabled"; + + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = <&funnel1_in1>; + }; + }; + }; + }; + + etm2: etm@85e000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x0085e000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + arm,coresight-loses-context-with-cpu; + + cpu = <&CPU2>; + + status = "disabled"; + + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = <&funnel1_in2>; + }; + }; + }; + }; + + etm3: etm@85f000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x0085f000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + arm,coresight-loses-context-with-cpu; + + cpu = <&CPU3>; + + status = "disabled"; + + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = <&funnel1_in3>; + }; + }; + }; + }; + + msmgpio: pinctrl@1000000 { + compatible = "qcom,msm8916-pinctrl"; + reg = <0x01000000 0x300000>; + interrupts = ; + gpio-controller; + gpio-ranges = <&msmgpio 0 0 122>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gcc: clock-controller@1800000 { + compatible = "qcom,gcc-msm8916"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0x01800000 0x80000>; + clocks = <&xo_board>, + <&sleep_clk>, + <&dsi_phy0 1>, + <&dsi_phy0 0>, + <0>, + <0>, + <0>; + clock-names = "xo", + "sleep_clk", + "dsi0pll", + "dsi0pllbyte", + "ext_mclk", + "ext_pri_i2s", + "ext_sec_i2s"; + }; + + tcsr_mutex: hwlock@1905000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x01905000 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr: syscon@1937000 { + compatible = "qcom,tcsr-msm8916", "syscon"; + reg = <0x01937000 0x30000>; + }; + + mdss: mdss@1a00000 { + status = "disabled"; + compatible = "qcom,mdss"; + reg = <0x01a00000 0x1000>, + <0x01ac8000 0x3000>; + reg-names = "mdss_phys", "vbif_phys"; + + power-domains = <&gcc MDSS_GDSC>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "vsync"; + + interrupts = ; + + interrupt-controller; + #interrupt-cells = <1>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mdp: mdp@1a01000 { + compatible = "qcom,mdp5"; + reg = <0x01a01000 0x89000>; + reg-names = "mdp_phys"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "core", + "vsync"; + + iommus = <&apps_iommu 4>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdp5_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + }; + }; + + dsi0: dsi@1a98000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0x01a98000 0x25c>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + assigned-clocks = <&gcc BYTE0_CLK_SRC>, + <&gcc PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi_phy0 0>, + <&dsi_phy0 1>; + + clocks = <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_BYTE0_CLK>, + <&gcc GCC_MDSS_PCLK0_CLK>, + <&gcc GCC_MDSS_ESC0_CLK>; + clock-names = "mdp_core", + "iface", + "bus", + "byte", + "pixel", + "core"; + phys = <&dsi_phy0>; + phy-names = "dsi-phy"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&mdp5_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + }; + + dsi_phy0: dsi-phy@1a98300 { + compatible = "qcom,dsi-phy-28nm-lp"; + reg = <0x01a98300 0xd4>, + <0x01a98500 0x280>, + <0x01a98780 0x30>; + reg-names = "dsi_pll", + "dsi_phy", + "dsi_phy_regulator"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&xo_board>; + clock-names = "iface", "ref"; + }; + }; + + camss: camss@1b0ac00 { + compatible = "qcom,msm8916-camss"; + reg = <0x01b0ac00 0x200>, + <0x01b00030 0x4>, + <0x01b0b000 0x200>, + <0x01b00038 0x4>, + <0x01b08000 0x100>, + <0x01b08400 0x100>, + <0x01b0a000 0x500>, + <0x01b00020 0x10>, + <0x01b10000 0x1000>; + reg-names = "csiphy0", + "csiphy0_clk_mux", + "csiphy1", + "csiphy1_clk_mux", + "csid0", + "csid1", + "ispif", + "csi_clk_mux", + "vfe0"; + interrupts = , + , + , + , + , + ; + interrupt-names = "csiphy0", + "csiphy1", + "csid0", + "csid1", + "ispif", + "vfe0"; + power-domains = <&gcc VFE_GDSC>; + clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>, + <&gcc GCC_CAMSS_ISPIF_AHB_CLK>, + <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>, + <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>, + <&gcc GCC_CAMSS_CSI0_AHB_CLK>, + <&gcc GCC_CAMSS_CSI0_CLK>, + <&gcc GCC_CAMSS_CSI0PHY_CLK>, + <&gcc GCC_CAMSS_CSI0PIX_CLK>, + <&gcc GCC_CAMSS_CSI0RDI_CLK>, + <&gcc GCC_CAMSS_CSI1_AHB_CLK>, + <&gcc GCC_CAMSS_CSI1_CLK>, + <&gcc GCC_CAMSS_CSI1PHY_CLK>, + <&gcc GCC_CAMSS_CSI1PIX_CLK>, + <&gcc GCC_CAMSS_CSI1RDI_CLK>, + <&gcc GCC_CAMSS_AHB_CLK>, + <&gcc GCC_CAMSS_VFE0_CLK>, + <&gcc GCC_CAMSS_CSI_VFE0_CLK>, + <&gcc GCC_CAMSS_VFE_AHB_CLK>, + <&gcc GCC_CAMSS_VFE_AXI_CLK>; + clock-names = "top_ahb", + "ispif_ahb", + "csiphy0_timer", + "csiphy1_timer", + "csi0_ahb", + "csi0", + "csi0_phy", + "csi0_pix", + "csi0_rdi", + "csi1_ahb", + "csi1", + "csi1_phy", + "csi1_pix", + "csi1_rdi", + "ahb", + "vfe0", + "csi_vfe0", + "vfe_ahb", + "vfe_axi"; + iommus = <&apps_iommu 3>; + status = "disabled"; + ports { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + cci: cci@1b0c000 { + compatible = "qcom,msm8916-cci"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x01b0c000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>, + <&gcc GCC_CAMSS_CCI_AHB_CLK>, + <&gcc GCC_CAMSS_CCI_CLK>, + <&gcc GCC_CAMSS_AHB_CLK>; + clock-names = "camss_top_ahb", "cci_ahb", + "cci", "camss_ahb"; + assigned-clocks = <&gcc GCC_CAMSS_CCI_AHB_CLK>, + <&gcc GCC_CAMSS_CCI_CLK>; + assigned-clock-rates = <80000000>, <19200000>; + pinctrl-names = "default"; + pinctrl-0 = <&cci0_default>; + status = "disabled"; + + cci_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <400000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + gpu@1c00000 { + compatible = "qcom,adreno-306.0", "qcom,adreno"; + reg = <0x01c00000 0x20000>; + reg-names = "kgsl_3d0_reg_memory"; + interrupts = ; + interrupt-names = "kgsl_3d0_irq"; + clock-names = + "core", + "iface", + "mem", + "mem_iface", + "alt_mem_iface", + "gfx3d"; + clocks = + <&gcc GCC_OXILI_GFX3D_CLK>, + <&gcc GCC_OXILI_AHB_CLK>, + <&gcc GCC_OXILI_GMEM_CLK>, + <&gcc GCC_BIMC_GFX_CLK>, + <&gcc GCC_BIMC_GPU_CLK>, + <&gcc GFX3D_CLK_SRC>; + power-domains = <&gcc OXILI_GDSC>; + operating-points-v2 = <&gpu_opp_table>; + iommus = <&gpu_iommu 1>, <&gpu_iommu 2>; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + }; + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + }; + }; + }; + + venus: video-codec@1d00000 { + compatible = "qcom,msm8916-venus"; + reg = <0x01d00000 0xff000>; + interrupts = ; + power-domains = <&gcc VENUS_GDSC>; + clocks = <&gcc GCC_VENUS0_VCODEC0_CLK>, + <&gcc GCC_VENUS0_AHB_CLK>, + <&gcc GCC_VENUS0_AXI_CLK>; + clock-names = "core", "iface", "bus"; + iommus = <&apps_iommu 5>; + memory-region = <&venus_mem>; + status = "okay"; + + video-decoder { + compatible = "venus-decoder"; + }; + + video-encoder { + compatible = "venus-encoder"; + }; + }; + + apps_iommu: iommu@1ef0000 { + #address-cells = <1>; + #size-cells = <1>; + #iommu-cells = <1>; + compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1"; + ranges = <0 0x01e20000 0x20000>; + reg = <0x01ef0000 0x3000>; + clocks = <&gcc GCC_SMMU_CFG_CLK>, + <&gcc GCC_APSS_TCU_CLK>; + clock-names = "iface", "bus"; + qcom,iommu-secure-id = <17>; + + // vfe: + iommu-ctx@3000 { + compatible = "qcom,msm-iommu-v1-sec"; + reg = <0x3000 0x1000>; + interrupts = ; + }; + + // mdp_0: + iommu-ctx@4000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x4000 0x1000>; + interrupts = ; + }; + + // venus_ns: + iommu-ctx@5000 { + compatible = "qcom,msm-iommu-v1-sec"; + reg = <0x5000 0x1000>; + interrupts = ; + }; + }; + + gpu_iommu: iommu@1f08000 { + #address-cells = <1>; + #size-cells = <1>; + #iommu-cells = <1>; + compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1"; + ranges = <0 0x01f08000 0x10000>; + clocks = <&gcc GCC_SMMU_CFG_CLK>, + <&gcc GCC_GFX_TCU_CLK>; + clock-names = "iface", "bus"; + qcom,iommu-secure-id = <18>; + + // gfx3d_user: + iommu-ctx@1000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x1000 0x1000>; + interrupts = ; + }; + + // gfx3d_priv: + iommu-ctx@2000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x2000 0x1000>; + interrupts = ; + }; + }; + + spmi_bus: spmi@200f000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0200f000 0x001000>, + <0x02400000 0x400000>, + <0x02c00000 0x400000>, + <0x03800000 0x200000>, + <0x0200a000 0x002100>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = ; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + bam_dmux_dma: dma-controller@4044000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x04044000 0x19000>; + interrupts = ; + #dma-cells = <1>; + qcom,ee = <0>; + + num-channels = <6>; + qcom,num-ees = <1>; + qcom,powered-remotely; + + status = "disabled"; + }; + + mpss: remoteproc@4080000 { + compatible = "qcom,msm8916-mss-pil"; + reg = <0x04080000 0x100>, + <0x04020000 0x040>; + + reg-names = "qdsp6", "rmb"; + + interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>, + <&hexagon_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&hexagon_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&hexagon_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&hexagon_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + power-domains = <&rpmpd MSM8916_VDDCX>, + <&rpmpd MSM8916_VDDMX>; + power-domain-names = "cx", "mx"; + + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, + <&gcc GCC_BOOT_ROM_AHB_CLK>, + <&xo_board>; + clock-names = "iface", "bus", "mem", "xo"; + + qcom,smem-states = <&hexagon_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + resets = <&scm 0>; + reset-names = "mss_restart"; + + qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>; + + status = "disabled"; + + mba { + memory-region = <&mba_mem>; + }; + + mpss { + memory-region = <&mpss_mem>; + }; + + bam_dmux: bam-dmux { + compatible = "qcom,bam-dmux"; + + interrupt-parent = <&hexagon_smsm>; + interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "pc", "pc-ack"; + + qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>; + qcom,smem-state-names = "pc", "pc-ack"; + + dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>; + dma-names = "tx", "rx"; + + status = "disabled"; + }; + + smd-edge { + interrupts = ; + + qcom,smd-edge = <0>; + qcom,ipc = <&apcs 8 12>; + qcom,remote-pid = <1>; + + label = "hexagon"; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,smd-channels = "fastrpcsmd-apps-dsp"; + label = "adsp"; + qcom,non-secure-domain; + + #address-cells = <1>; + #size-cells = <0>; + + cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + }; + }; + }; + }; + + sound: sound@7702000 { + status = "disabled"; + compatible = "qcom,apq8016-sbc-sndcard"; + reg = <0x07702000 0x4>, <0x07702004 0x4>; + reg-names = "mic-iomux", "spkr-iomux"; + }; + + lpass: audio-controller@7708000 { + status = "disabled"; + compatible = "qcom,lpass-cpu-apq8016"; + + /* + * Note: Unlike the name would suggest, the SEC_I2S_CLK + * is actually only used by Tertiary MI2S while + * Primary/Secondary MI2S both use the PRI_I2S_CLK. + */ + clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>, + <&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>, + <&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>, + <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>, + <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>, + <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>, + <&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>; + + clock-names = "ahbix-clk", + "pcnoc-mport-clk", + "pcnoc-sway-clk", + "mi2s-bit-clk0", + "mi2s-bit-clk1", + "mi2s-bit-clk2", + "mi2s-bit-clk3"; + #sound-dai-cells = <1>; + + interrupts = ; + interrupt-names = "lpass-irq-lpaif"; + reg = <0x07708000 0x10000>; + reg-names = "lpass-lpaif"; + + #address-cells = <1>; + #size-cells = <0>; + }; + + lpass_codec: audio-codec@771c000 { + compatible = "qcom,msm8916-wcd-digital-codec"; + reg = <0x0771c000 0x400>; + clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>, + <&gcc GCC_CODEC_DIGCODEC_CLK>; + clock-names = "ahbix-clk", "mclk"; + #sound-dai-cells = <1>; + }; + + sdhc_1: mmc@7824900 { + compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"; + reg = <0x07824900 0x11c>, <0x07824000 0x800>; + reg-names = "hc", "core"; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&xo_board>; + clock-names = "iface", "core", "xo"; + mmc-ddr-1_8v; + bus-width = <8>; + non-removable; + status = "disabled"; + }; + + sdhc_2: mmc@7864900 { + compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"; + reg = <0x07864900 0x11c>, <0x07864000 0x800>; + reg-names = "hc", "core"; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&xo_board>; + clock-names = "iface", "core", "xo"; + bus-width = <4>; + status = "disabled"; + }; + + blsp_dma: dma-controller@7884000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07884000 0x23000>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + status = "disabled"; + }; + + blsp1_uart1: serial@78af000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078af000 0x200>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 0>, <&blsp_dma 1>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_uart1_default>; + pinctrl-1 = <&blsp1_uart1_sleep>; + status = "disabled"; + }; + + blsp1_uart2: serial@78b0000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b0000 0x200>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 2>, <&blsp_dma 3>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_uart2_default>; + pinctrl-1 = <&blsp1_uart2_sleep>; + status = "disabled"; + }; + + blsp_i2c1: i2c@78b5000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b5000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c1_default>; + pinctrl-1 = <&i2c1_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi1: spi@78b5000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b5000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 4>, <&blsp_dma 5>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi1_default>; + pinctrl-1 = <&spi1_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c2: i2c@78b6000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b6000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c2_default>; + pinctrl-1 = <&i2c2_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi2: spi@78b6000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b6000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 6>, <&blsp_dma 7>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi2_default>; + pinctrl-1 = <&spi2_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c3: i2c@78b7000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b7000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c3_default>; + pinctrl-1 = <&i2c3_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi3: spi@78b7000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b7000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 8>, <&blsp_dma 9>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi3_default>; + pinctrl-1 = <&spi3_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c4: i2c@78b8000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b8000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c4_default>; + pinctrl-1 = <&i2c4_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi4: spi@78b8000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b8000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 10>, <&blsp_dma 11>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi4_default>; + pinctrl-1 = <&spi4_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c5: i2c@78b9000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b9000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c5_default>; + pinctrl-1 = <&i2c5_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi5: spi@78b9000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b9000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 12>, <&blsp_dma 13>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi5_default>; + pinctrl-1 = <&spi5_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c6: i2c@78ba000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078ba000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c6_default>; + pinctrl-1 = <&i2c6_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi6: spi@78ba000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078ba000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 14>, <&blsp_dma 15>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi6_default>; + pinctrl-1 = <&spi6_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + usb: usb@78d9000 { + compatible = "qcom,ci-hdrc"; + reg = <0x078d9000 0x200>, + <0x078d9200 0x200>; + interrupts = , + ; + clocks = <&gcc GCC_USB_HS_AHB_CLK>, + <&gcc GCC_USB_HS_SYSTEM_CLK>; + clock-names = "iface", "core"; + assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>; + assigned-clock-rates = <80000000>; + resets = <&gcc GCC_USB_HS_BCR>; + reset-names = "core"; + phy_type = "ulpi"; + dr_mode = "otg"; + hnp-disable; + srp-disable; + adp-disable; + ahb-burst-config = <0>; + phy-names = "usb-phy"; + phys = <&usb_hs_phy>; + status = "disabled"; + #reset-cells = <1>; + + ulpi { + usb_hs_phy: phy { + compatible = "qcom,usb-hs-phy-msm8916", + "qcom,usb-hs-phy"; + #phy-cells = <0>; + clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>; + clock-names = "ref", "sleep"; + resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>; + reset-names = "phy", "por"; + qcom,init-seq = /bits/ 8 <0x0 0x44>, + <0x1 0x6b>, + <0x2 0x24>, + <0x3 0x13>; + }; + }; + }; + + pronto: remoteproc@a21b000 { + compatible = "qcom,pronto-v2-pil", "qcom,pronto"; + reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>; + reg-names = "ccu", "dxe", "pmu"; + + memory-region = <&wcnss_mem>; + + interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; + + power-domains = <&rpmpd MSM8916_VDDCX>, + <&rpmpd MSM8916_VDDMX>; + power-domain-names = "cx", "mx"; + + qcom,smem-states = <&wcnss_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + pinctrl-names = "default"; + pinctrl-0 = <&wcnss_pin_a>; + + status = "disabled"; + + iris { + compatible = "qcom,wcn3620"; + + clocks = <&rpmcc RPM_SMD_RF_CLK2>; + clock-names = "xo"; + }; + + smd-edge { + interrupts = ; + + qcom,ipc = <&apcs 8 17>; + qcom,smd-edge = <6>; + qcom,remote-pid = <4>; + + label = "pronto"; + + wcnss_ctrl: wcnss { + compatible = "qcom,wcnss"; + qcom,smd-channels = "WCNSS_CTRL"; + + qcom,mmio = <&pronto>; + + bluetooth { + compatible = "qcom,wcnss-bt"; + }; + + wifi { + compatible = "qcom,wcnss-wlan"; + + interrupts = , + ; + interrupt-names = "tx", "rx"; + + qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>; + qcom,smem-state-names = "tx-enable", "tx-rings-empty"; + }; + }; + }; + }; + + intc: interrupt-controller@b000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x0b000000 0x1000>, <0x0b002000 0x2000>, + <0x0b001000 0x1000>, <0x0b004000 0x2000>; + interrupts = ; + }; + + apcs: mailbox@b011000 { + compatible = "qcom,msm8916-apcs-kpss-global", "syscon"; + reg = <0x0b011000 0x1000>; + #mbox-cells = <1>; + clocks = <&a53pll>, <&gcc GPLL0_VOTE>; + clock-names = "pll", "aux"; + #clock-cells = <0>; + }; + + a53pll: clock@b016000 { + compatible = "qcom,msm8916-a53pll"; + reg = <0x0b016000 0x40>; + #clock-cells = <0>; + clocks = <&xo_board>; + clock-names = "xo"; + }; + + timer@b020000 { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0x0b020000 0x1000>; + clock-frequency = <19200000>; + + frame@b021000 { + frame-number = <0>; + interrupts = , + ; + reg = <0x0b021000 0x1000>, + <0x0b022000 0x1000>; + }; + + frame@b023000 { + frame-number = <1>; + interrupts = ; + reg = <0x0b023000 0x1000>; + status = "disabled"; + }; + + frame@b024000 { + frame-number = <2>; + interrupts = ; + reg = <0x0b024000 0x1000>; + status = "disabled"; + }; + + frame@b025000 { + frame-number = <3>; + interrupts = ; + reg = <0x0b025000 0x1000>; + status = "disabled"; + }; + + frame@b026000 { + frame-number = <4>; + interrupts = ; + reg = <0x0b026000 0x1000>; + status = "disabled"; + }; + + frame@b027000 { + frame-number = <5>; + interrupts = ; + reg = <0x0b027000 0x1000>; + status = "disabled"; + }; + + frame@b028000 { + frame-number = <6>; + interrupts = ; + reg = <0x0b028000 0x1000>; + status = "disabled"; + }; + }; + + cpu0_acc: power-manager@b088000 { + compatible = "qcom,msm8916-acc"; + reg = <0x0b088000 0x1000>; + status = "reserved"; /* Controlled by PSCI firmware */ + }; + + cpu0_saw: power-manager@b089000 { + compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b089000 0x1000>; + status = "reserved"; /* Controlled by PSCI firmware */ + }; + + cpu1_acc: power-manager@b098000 { + compatible = "qcom,msm8916-acc"; + reg = <0x0b098000 0x1000>; + status = "reserved"; /* Controlled by PSCI firmware */ + }; + + cpu1_saw: power-manager@b099000 { + compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b099000 0x1000>; + status = "reserved"; /* Controlled by PSCI firmware */ + }; + + cpu2_acc: power-manager@b0a8000 { + compatible = "qcom,msm8916-acc"; + reg = <0x0b0a8000 0x1000>; + status = "reserved"; /* Controlled by PSCI firmware */ + }; + + cpu2_saw: power-manager@b0a9000 { + compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b0a9000 0x1000>; + status = "reserved"; /* Controlled by PSCI firmware */ + }; + + cpu3_acc: power-manager@b0b8000 { + compatible = "qcom,msm8916-acc"; + reg = <0x0b0b8000 0x1000>; + status = "reserved"; /* Controlled by PSCI firmware */ + }; + + cpu3_saw: power-manager@b0b9000 { + compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b0b9000 0x1000>; + status = "reserved"; /* Controlled by PSCI firmware */ + }; + }; + + thermal-zones { + cpu0-1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 5>; + + trips { + cpu0_1_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu0_1_crit: cpu_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu0_1_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu2-3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 4>; + + trips { + cpu2_3_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu2_3_crit: cpu_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu2_3_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + gpu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 2>; + + trips { + gpu_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + gpu_crit: gpu_crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + camera-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 1>; + + trips { + cam_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + modem-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 0>; + + trips { + modem_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; +}; + +#include "msm8916-pins.dtsi" diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi new file mode 100644 index 000000000..85a87d058 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi @@ -0,0 +1,1329 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* Copyright (c) 2022, The Linux Foundation. All rights reserved. */ + +#include +#include +#include +#include +#include + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + clocks { + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + clock-output-names = "xo"; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_0>; + #cooling-cells = <2>; + + l1-icache { + compatible = "cache"; + }; + l1-dcache { + compatible = "cache"; + }; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_0>; + #cooling-cells = <2>; + + l1-icache { + compatible = "cache"; + }; + l1-dcache { + compatible = "cache"; + }; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x2>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_0>; + #cooling-cells = <2>; + + l1-icache { + compatible = "cache"; + }; + l1-dcache { + compatible = "cache"; + }; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x3>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_0>; + #cooling-cells = <2>; + + l1-icache { + compatible = "cache"; + }; + l1-dcache { + compatible = "cache"; + }; + }; + + CPU4: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x100>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_1>; + #cooling-cells = <2>; + + l1-icache { + compatible = "cache"; + }; + l1-dcache { + compatible = "cache"; + }; + }; + + CPU5: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x101>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_1>; + #cooling-cells = <2>; + + l1-icache { + compatible = "cache"; + }; + l1-dcache { + compatible = "cache"; + }; + }; + + CPU6: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x102>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_1>; + #cooling-cells = <2>; + + l1-icache { + compatible = "cache"; + }; + l1-dcache { + compatible = "cache"; + }; + }; + + CPU7: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x103>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_1>; + #cooling-cells = <2>; + + l1-icache { + compatible = "cache"; + }; + l1-dcache { + compatible = "cache"; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + core1 { + cpu = <&CPU1>; + }; + core2 { + cpu = <&CPU2>; + }; + core3 { + cpu = <&CPU3>; + }; + }; + + cluster1 { + core0 { + cpu = <&CPU4>; + }; + core1 { + cpu = <&CPU5>; + }; + core2 { + cpu = <&CPU6>; + }; + core3 { + cpu = <&CPU7>; + }; + }; + }; + + L2_0: l2-cache_0 { + compatible = "cache"; + cache-level = <2>; + }; + + L2_1: l2-cache_1 { + compatible = "cache"; + cache-level = <2>; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-msm8953", "qcom,scm"; + clocks = <&gcc GCC_CRYPTO_CLK>, + <&gcc GCC_CRYPTO_AXI_CLK>, + <&gcc GCC_CRYPTO_AHB_CLK>; + clock-names = "core", "bus", "iface"; + #reset-cells = <1>; + }; + }; + + memory { + device_type = "memory"; + /* We expect the bootloader to fill in the reg */ + reg = <0 0 0 0>; + }; + + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = ; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + zap_shader_region: memory@81800000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x81800000 0x0 0x2000>; + no-map; + }; + + memory@85b00000 { + reg = <0x0 0x85b00000 0x0 0x800000>; + no-map; + }; + + smem_mem: memory@86300000 { + compatible = "qcom,smem"; + reg = <0x0 0x86300000 0x0 0x100000>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + hwlocks = <&tcsr_mutex 3>; + no-map; + }; + + memory@86400000 { + reg = <0x0 0x86400000 0x0 0x400000>; + no-map; + }; + + mpss_mem: memory@86c00000 { + reg = <0x0 0x86c00000 0x0 0x6a00000>; + no-map; + }; + + adsp_fw_mem: memory@8d600000 { + reg = <0x0 0x8d600000 0x0 0x1100000>; + no-map; + }; + + wcnss_fw_mem: memory@8e700000 { + reg = <0x0 0x8e700000 0x0 0x700000>; + no-map; + }; + + memory@90000000 { + reg = <0 0x90000000 0 0x1000>; + no-map; + }; + + memory@90001000 { + reg = <0x0 0x90001000 0x0 0x13ff000>; + no-map; + }; + + venus_mem: memory@91400000 { + reg = <0x0 0x91400000 0x0 0x700000>; + no-map; + }; + + mba_mem: memory@92000000 { + reg = <0x0 0x92000000 0x0 0x100000>; + no-map; + }; + + memory@f2d00000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0xf2d00000 0x0 0x180000>; + no-map; + + qcom,client-id = <1>; + }; + }; + + smd { + compatible = "qcom,smd"; + + rpm { + interrupts = ; + qcom,ipc = <&apcs 8 0>; + qcom,smd-edge = <15>; + + rpm_requests: rpm-requests { + compatible = "qcom,rpm-msm8953"; + qcom,smd-channels = "rpm_requests"; + + rpmcc: rpmcc { + compatible = "qcom,rpmcc-msm8953", "qcom,rpmcc"; + clocks = <&xo_board>; + clock-names = "xo"; + #clock-cells = <1>; + }; + + rpmpd: power-controller { + compatible = "qcom,msm8953-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + clocks = <&xo_board>; + clock-names = "ref"; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp_ret: opp1 { + opp-level = ; + }; + + rpmpd_opp_ret_plus: opp2 { + opp-level = ; + }; + + rpmpd_opp_min_svs: opp3 { + opp-level = ; + }; + + rpmpd_opp_low_svs: opp4 { + opp-level = ; + }; + + rpmpd_opp_svs: opp5 { + opp-level = ; + }; + + rpmpd_opp_svs_plus: opp6 { + opp-level = ; + }; + + rpmpd_opp_nom: opp7 { + opp-level = ; + }; + + rpmpd_opp_nom_plus: opp8 { + opp-level = ; + }; + + rpmpd_opp_turbo: opp9 { + opp-level = ; + }; + }; + }; + }; + }; + }; + + smsm { + compatible = "qcom,smsm"; + + #address-cells = <1>; + #size-cells = <0>; + + qcom,ipc-1 = <&apcs 8 13>; + qcom,ipc-3 = <&apcs 8 19>; + + apps_smsm: apps@0 { + reg = <0>; + + #qcom,smem-state-cells = <1>; + }; + }; + + soc: soc@0 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + compatible = "simple-bus"; + + rpm_msg_ram: sram@60000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0x60000 0x8000>; + }; + + hsusb_phy: phy@79000 { + compatible = "qcom,msm8953-qusb2-phy"; + reg = <0x79000 0x180>; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB_PHY_CFG_AHB_CLK>, + <&gcc GCC_QUSB_REF_CLK>; + clock-names = "cfg_ahb", "ref"; + + qcom,tcsr-syscon = <&tcsr_phy_clk_scheme_sel>; + + resets = <&gcc GCC_QUSB2_PHY_BCR>; + + status = "disabled"; + }; + + rng@e3000 { + compatible = "qcom,prng"; + reg = <0x000e3000 0x1000>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; + + tsens0: thermal-sensor@4a9000 { + compatible = "qcom,msm8953-tsens", "qcom,tsens-v2"; + reg = <0x4a9000 0x1000>, /* TM */ + <0x4a8000 0x1000>; /* SROT */ + #qcom,sensors = <16>; + interrupts = , + ; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + restart@4ab000 { + compatible = "qcom,pshold"; + reg = <0x4ab000 0x4>; + }; + + tlmm: pinctrl@1000000 { + compatible = "qcom,msm8953-pinctrl"; + reg = <0x1000000 0x300000>; + interrupts = ; + gpio-controller; + gpio-ranges = <&tlmm 0 0 142>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + uart_console_active: uart-console-active-pins { + pins = "gpio4", "gpio5"; + function = "blsp_uart2"; + drive-strength = <2>; + bias-disable; + }; + + uart_console_sleep: uart-console-sleep-pins { + pins = "gpio4", "gpio5"; + function = "blsp_uart2"; + drive-strength = <2>; + bias-pull-down; + }; + + sdc1_clk_on: sdc1-clk-on-pins { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <16>; + }; + + sdc1_clk_off: sdc1-clk-off-pins { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; + + sdc1_cmd_on: sdc1-cmd-on-pins { + pins = "sdc1_cmd"; + bias-disable; + drive-strength = <10>; + }; + + sdc1_cmd_off: sdc1-cmd-off-pins { + pins = "sdc1_cmd"; + bias-disable; + drive-strength = <2>; + }; + + sdc1_data_on: sdc1-data-on-pins { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <10>; + }; + + sdc1_data_off: sdc1-data-off-pins { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + + sdc1_rclk_on: sdc1-rclk-on-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + + sdc1_rclk_off: sdc1-rclk-off-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + + sdc2_clk_on: sdc2-clk-on-pins { + pins = "sdc2_clk"; + drive-strength = <16>; + bias-disable; + }; + + sdc2_clk_off: sdc2-clk-off-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + + sdc2_cmd_on: sdc2-cmd-on-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + sdc2_cmd_off: sdc2-cmd-off-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + sdc2_data_on: sdc2-data-on-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + + sdc2_data_off: sdc2-data-off-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + + sdc2_cd_on: cd-on-pins { + pins = "gpio133"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + sdc2_cd_off: cd-off-pins { + pins = "gpio133"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + gpio_key_default: gpio-key-default-pins { + pins = "gpio85"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + i2c_1_default: i2c-1-default-pins { + pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; + drive-strength = <2>; + bias-disable; + }; + + i2c_1_sleep: i2c-1-sleep-pins { + pins = "gpio2", "gpio3"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + i2c_2_default: i2c-2-default-pins { + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; + drive-strength = <2>; + bias-disable; + }; + + i2c_2_sleep: i2c-2-sleep-pins { + pins = "gpio6", "gpio7"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + i2c_3_default: i2c-3-default-pins { + pins = "gpio10", "gpio11"; + function = "blsp_i2c3"; + drive-strength = <2>; + bias-disable; + }; + + i2c_3_sleep: i2c-3-sleep-pins { + pins = "gpio10", "gpio11"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + i2c_4_default: i2c-4-default-pins { + pins = "gpio14", "gpio15"; + function = "blsp_i2c4"; + drive-strength = <2>; + bias-disable; + }; + + i2c_4_sleep: i2c-4-sleep-pins { + pins = "gpio14", "gpio15"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + i2c_5_default: i2c-5-default-pins { + pins = "gpio18", "gpio19"; + function = "blsp_i2c5"; + drive-strength = <2>; + bias-disable; + }; + + i2c_5_sleep: i2c-5-sleep-pins { + pins = "gpio18", "gpio19"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + i2c_6_default: i2c-6-default-pins { + pins = "gpio22", "gpio23"; + function = "blsp_i2c6"; + drive-strength = <2>; + bias-disable; + }; + + i2c_6_sleep: i2c-6-sleep-pins { + pins = "gpio22", "gpio23"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + i2c_7_default: i2c-7-default-pins { + pins = "gpio135", "gpio136"; + function = "blsp_i2c7"; + drive-strength = <2>; + bias-disable; + }; + + i2c_7_sleep: i2c-7-sleep-pins { + pins = "gpio135", "gpio136"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + i2c_8_default: i2c-8-default-pins { + pins = "gpio98", "gpio99"; + function = "blsp_i2c8"; + drive-strength = <2>; + bias-disable; + }; + + i2c_8_sleep: i2c-8-sleep-pins { + pins = "gpio98", "gpio99"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + + gcc: clock-controller@1800000 { + compatible = "qcom,gcc-msm8953"; + reg = <0x1800000 0x80000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clocks = <&xo_board>, + <&sleep_clk>, + <0>, + <0>, + <0>, + <0>; + clock-names = "xo", + "sleep", + "dsi0pll", + "dsi0pllbyte", + "dsi1pll", + "dsi1pllbyte"; + }; + + tcsr_mutex: hwlock@1905000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x1905000 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr: syscon@1937000 { + compatible = "qcom,tcsr-msm8953", "syscon"; + reg = <0x1937000 0x30000>; + }; + + tcsr_phy_clk_scheme_sel: syscon@193f044 { + compatible = "qcom,tcsr-msm8953", "syscon"; + reg = <0x193f044 0x4>; + }; + + spmi_bus: spmi@200f000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x200f000 0x1000>, + <0x2400000 0x800000>, + <0x2c00000 0x800000>, + <0x3800000 0x200000>, + <0x200a000 0x2100>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = ; + qcom,ee = <0>; + qcom,channel = <0>; + interrupt-controller; + + #interrupt-cells = <4>; + #address-cells = <2>; + #size-cells = <0>; + }; + + usb3: usb@70f8800 { + compatible = "qcom,msm8953-dwc3", "qcom,dwc3"; + reg = <0x70f8800 0x400>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + interrupts = , + ; + interrupt-names = "hs_phy_irq", "ss_phy_irq"; + + clocks = <&gcc GCC_USB_PHY_CFG_AHB_CLK>, + <&gcc GCC_USB30_MASTER_CLK>, + <&gcc GCC_PCNOC_USB3_AXI_CLK>, + <&gcc GCC_USB30_SLEEP_CLK>, + <&gcc GCC_USB30_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_MASTER_CLK>; + assigned-clock-rates = <19200000>, <133330000>; + + power-domains = <&gcc USB30_GDSC>; + + qcom,select-utmi-as-pipe-clk; + + status = "disabled"; + + usb3_dwc3: usb@7000000 { + compatible = "snps,dwc3"; + reg = <0x07000000 0xcc00>; + interrupts = ; + phys = <&hsusb_phy>; + phy-names = "usb2-phy"; + + snps,usb2-gadget-lpm-disable; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; + snps,is-utmi-l1-suspend; + snps,hird-threshold = /bits/ 8 <0x00>; + + maximum-speed = "high-speed"; + phy_mode = "utmi"; + }; + }; + + sdhc_1: mmc@7824900 { + compatible = "qcom,msm8953-sdhci", "qcom,sdhci-msm-v4"; + + reg = <0x7824900 0x500>, <0x7824000 0x800>; + reg-names = "hc", "core"; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&xo_board>; + clock-names = "iface", "core", "xo"; + + power-domains = <&rpmpd MSM8953_VDDCX>; + operating-points-v2 = <&sdhc1_opp_table>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>; + + mmc-hs400-1_8v; + mmc-hs200-1_8v; + mmc-ddr-1_8v; + bus-width = <8>; + non-removable; + + status = "disabled"; + + sdhc1_opp_table: opp-table-sdhc1 { + compatible = "operating-points-v2"; + + opp-25000000 { + opp-hz = /bits/ 64 <25000000>; + required-opps = <&rpmpd_opp_low_svs>; + }; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmpd_opp_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmpd_opp_svs>; + }; + + opp-192000000 { + opp-hz = /bits/ 64 <192000000>; + required-opps = <&rpmpd_opp_nom>; + }; + + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + required-opps = <&rpmpd_opp_nom>; + }; + }; + }; + + sdhc_2: mmc@7864900 { + compatible = "qcom,msm8953-sdhci", "qcom,sdhci-msm-v4"; + + reg = <0x7864900 0x500>, <0x7864000 0x800>; + reg-names = "hc", "core"; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&xo_board>; + clock-names = "iface", "core", "xo"; + + power-domains = <&rpmpd MSM8953_VDDCX>; + operating-points-v2 = <&sdhc2_opp_table>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; + + bus-width = <4>; + + status = "disabled"; + + sdhc2_opp_table: opp-table-sdhc2 { + compatible = "operating-points-v2"; + + opp-25000000 { + opp-hz = /bits/ 64 <25000000>; + required-opps = <&rpmpd_opp_low_svs>; + }; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmpd_opp_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmpd_opp_svs>; + }; + + opp-177770000 { + opp-hz = /bits/ 64 <177770000>; + required-opps = <&rpmpd_opp_nom>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmpd_opp_nom>; + }; + }; + }; + + uart_0: serial@78af000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x78af000 0x200>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + + status = "disabled"; + }; + + i2c_1: i2c@78b5000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x78b5000 0x600>; + interrupts = ; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c_1_default>; + pinctrl-1 = <&i2c_1_sleep>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_2: i2c@78b6000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x78b6000 0x600>; + interrupts = ; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c_2_default>; + pinctrl-1 = <&i2c_2_sleep>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_3: i2c@78b7000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x78b7000 0x600>; + interrupts = ; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c_3_default>; + pinctrl-1 = <&i2c_3_sleep>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_4: i2c@78b8000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x78b8000 0x600>; + interrupts = ; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c_4_default>; + pinctrl-1 = <&i2c_4_sleep>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_5: i2c@7af5000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x7af5000 0x600>; + interrupts = ; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c_5_default>; + pinctrl-1 = <&i2c_5_sleep>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_6: i2c@7af6000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x7af6000 0x600>; + interrupts = ; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c_6_default>; + pinctrl-1 = <&i2c_6_sleep>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_7: i2c@7af7000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x7af7000 0x600>; + interrupts = ; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c_7_default>; + pinctrl-1 = <&i2c_7_sleep>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_8: i2c@7af8000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x7af8000 0x600>; + interrupts = ; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c_8_default>; + pinctrl-1 = <&i2c_8_sleep>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + intc: interrupt-controller@b000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>; + }; + + apcs: mailbox@b011000 { + compatible = "qcom,msm8953-apcs-kpss-global", "syscon"; + reg = <0xb011000 0x1000>; + #mbox-cells = <1>; + }; + + timer@b120000 { + compatible = "arm,armv7-timer-mem"; + reg = <0xb120000 0x1000>; + #address-cells = <0x01>; + #size-cells = <0x01>; + ranges; + + frame@b121000 { + frame-number = <0>; + interrupts = , + ; + reg = <0xb121000 0x1000>, + <0xb122000 0x1000>; + }; + + frame@b123000 { + frame-number = <1>; + interrupts = ; + reg = <0xb123000 0x1000>; + status = "disabled"; + }; + + frame@b124000 { + frame-number = <2>; + interrupts = ; + reg = <0xb124000 0x1000>; + status = "disabled"; + }; + + frame@b125000 { + frame-number = <3>; + interrupts = ; + reg = <0xb125000 0x1000>; + status = "disabled"; + }; + + frame@b126000 { + frame-number = <4>; + interrupts = ; + reg = <0xb126000 0x1000>; + status = "disabled"; + }; + + frame@b127000 { + frame-number = <5>; + interrupts = ; + reg = <0xb127000 0x1000>; + status = "disabled"; + }; + + frame@b128000 { + frame-number = <6>; + interrupts = ; + reg = <0xb128000 0x1000>; + status = "disabled"; + }; + }; + }; + + thermal-zones { + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens0 9>; + trips { + cpu0_alert: trip-point0 { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu0_crit: crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu0_alert>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens0 10>; + trips { + cpu1_alert: trip-point0 { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu1_crit: crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu1_alert>; + cooling-device = <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens0 11>; + trips { + cpu2_alert: trip-point0 { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu2_crit: crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu2_alert>; + cooling-device = <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens0 12>; + trips { + cpu3_alert: trip-point0 { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu3_crit: crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu3_alert>; + cooling-device = <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + cpu4-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens0 4>; + trips { + cpu4_alert: trip-point0 { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu4_crit: crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu4_alert>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + cpu5-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens0 5>; + trips { + cpu5_alert: trip-point0 { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu5_crit: crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu5_alert>; + cooling-device = <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + cpu6-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens0 6>; + trips { + cpu6_alert: trip-point0 { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu6_crit: crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu6_alert>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + cpu7-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens0 7>; + trips { + cpu7_alert: trip-point0 { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu7_crit: crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu7_alert>; + cooling-device = <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-10.dts b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-10.dts new file mode 100644 index 000000000..4159fc355 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-10.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) Jean Thomas + */ + +/dts-v1/; + +#include "msm8992-lg-bullhead.dtsi" + +/ { + model = "LG Nexus 5X rev 1.0"; + + /* required for bootloader to select correct board */ + qcom,board-id = <0xa64 0>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-101.dts new file mode 100644 index 000000000..ad9702dd1 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-101.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) Jean Thomas + */ + +/dts-v1/; + +#include "msm8992-lg-bullhead.dtsi" + +/ { + model = "LG Nexus 5X rev 1.01"; + + /* required for bootloader to select correct board */ + qcom,board-id = <0xb64 0>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi new file mode 100644 index 000000000..13b8823ae --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi @@ -0,0 +1,302 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2015, LGE Inc. All rights reserved. + * Copyright (c) 2016, The Linux Foundation. All rights reserved. + * Copyright (c) 2021-2022, Petr Vorel + * Copyright (c) 2022, Dominik Kobinski + */ + +/dts-v1/; + +#include "msm8992.dtsi" +#include "pm8994.dtsi" +#include "pmi8994.dtsi" + +/* cont_splash_mem has different memory mapping */ +/delete-node/ &cont_splash_mem; + +/* disabled on downstream, conflicts with cont_splash_mem */ +/delete-node/ &dfps_data_mem; + +/ { + model = "LG Nexus 5X"; + compatible = "lg,bullhead", "qcom,msm8992"; + chassis-type = "handset"; + + qcom,msm-id = <251 0>, <252 0>; + qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>; + + /* Bullhead firmware doesn't support PSCI */ + /delete-node/ psci; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ramoops@1ff00000 { + compatible = "ramoops"; + reg = <0x0 0x1ff00000 0x0 0x40000>; + console-size = <0x10000>; + record-size = <0x10000>; + ftrace-size = <0x10000>; + pmsg-size = <0x20000>; + }; + + cont_splash_mem: memory@3400000 { + reg = <0 0x03400000 0 0xc00000>; + no-map; + }; + + reserved@5000000 { + reg = <0x0 0x05000000 0x0 0x1a00000>; + no-map; + }; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&rpm_requests { + pm8994_regulators: pm8994-regulators { + compatible = "qcom,rpm-pm8994-regulators"; + + vdd_l1-supply = <&pm8994_s1>; + vdd_l2_26_28-supply = <&pm8994_s3>; + vdd_l3_11-supply = <&pm8994_s3>; + vdd_l4_27_31-supply = <&pm8994_s3>; + vdd_l5_7-supply = <&pm8994_s3>; + vdd_l6_12_32-supply = <&pm8994_s5>; + vdd_l8_16_30-supply = <&vph_pwr>; + vdd_l9_10_18_22-supply = <&vph_pwr>; + vdd_l13_19_23_24-supply = <&vph_pwr>; + vdd_l14_15-supply = <&pm8994_s5>; + vdd_l17_29-supply = <&vph_pwr>; + vdd_l20_21-supply = <&vph_pwr>; + vdd_l25-supply = <&pm8994_s5>; + vdd_lvs1_2-supply = <&pm8994_s4>; + + /* S1, S2, S6 and S12 are managed by RPMPD */ + + pm8994_s1: s1 { + regulator-min-microvolt = <1025000>; + regulator-max-microvolt = <1025000>; + }; + + pm8994_s2: s2 { + /* TODO */ + }; + + pm8994_s3: s3 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + pm8994_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + regulator-system-load = <325000>; + }; + + pm8994_s5: s5 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + }; + + pm8994_s7: s7 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + /* S8, S9, S10 and S11 - SPMI-managed VDD_APC */ + + pm8994_l1: l1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + pm8994_l2: l2 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + }; + + pm8994_l3: l3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8994_l4: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + /* L5 is inaccessible from RPM */ + + pm8994_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + /* L7 is inaccessible from RPM */ + + pm8994_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l11: l11 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8994_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8994_l14: l14 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8994_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8994_l17: l17 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8994_l18: l18 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8994_l19: l19 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-always-on; + regulator-boot-on; + regulator-allow-set-load; + regulator-system-load = <570000>; + }; + + pm8994_l21: l21 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + pm8994_l22: l22 { + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3100000>; + }; + + pm8994_l23: l23 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8994_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3150000>; + }; + + pm8994_l25: l25 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l26: l26 { + regulator-min-microvolt = <987500>; + regulator-max-microvolt = <987500>; + }; + + pm8994_l27: l27 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + pm8994_l28: l28 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + pm8994_l29: l29 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8994_l30: l30 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l31: l31 { + regulator-min-microvolt = <1262500>; + regulator-max-microvolt = <1262500>; + }; + + pm8994_l32: l32 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + + pmi8994_regulators: pmi8994-regulators { + compatible = "qcom,rpm-pmi8994-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_bst_byp-supply = <&vph_pwr>; + + pmi8994_s1: s1 {}; + + /* S2 & S3 - VDD_GFX */ + + pmi8994_bby: boost-bypass {}; + }; +}; + +&sdhc1 { + status = "okay"; + + mmc-hs400-1_8v; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-octagon-talkman.dts b/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-octagon-talkman.dts new file mode 100644 index 000000000..8933b5369 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-octagon-talkman.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio + * Copyright (c) 2020, Gustave Monce + */ + +/dts-v1/; + +#include "msm8992.dtsi" +#include "msm8994-msft-lumia-octagon.dtsi" + +/ { + model = "Microsoft Lumia 950"; + compatible = "microsoft,talkman", "qcom,msm8992"; + chassis-type = "handset"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts new file mode 100644 index 000000000..95eab1f37 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts @@ -0,0 +1,429 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio + */ + +/dts-v1/; + +#include "msm8992.dtsi" +#include "pm8994.dtsi" +#include "pmi8994.dtsi" +#include +#include + +/delete-node/ &adsp_mem; +/delete-node/ &audio_mem; +/delete-node/ &mpss_mem; +/delete-node/ &peripheral_region; +/delete-node/ &rmtfs_mem; + +/ { + model = "Xiaomi Mi 4C"; + compatible = "xiaomi,libra", "qcom,msm8992"; + chassis-type = "handset"; + + /* required for bootloader to select correct board */ + qcom,msm-id = <251 0>, <252 0>; + qcom,pmic-id = <65545 65546 0 0>; + qcom,board-id = <12 0>; + + /* This enables graphical output via bootloader-enabled display */ + chosen { + bootargs = "earlycon=tty0 console=tty0 maxcpus=1"; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer0: framebuffer@3400000 { + compatible = "simple-framebuffer"; + reg = <0 0x3400000 0 (1080 * 1920 * 3)>; + width = <1080>; + height = <1920>; + stride = <(1080 * 3)>; + format = "r8g8b8"; + /* + * That's a lot of clocks, but it's necessary due + * to unused clk cleanup & no panel driver yet.. + */ + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_VSYNC_CLK>, + <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_BYTE0_CLK>, + <&mmcc MDSS_PCLK0_CLK>, + <&mmcc MDSS_ESC0_CLK>; + power-domains = <&mmcc MDSS_GDSC>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + button { + label = "Volume Up"; + gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + wakeup-source; + debounce-interval = <15>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + memory_hole: hole@6400000 { + reg = <0 0x06400000 0 0x600000>; + no-map; + }; + + memory_hole2: hole2@6c00000 { + reg = <0 0x06c00000 0 0x2400000>; + no-map; + }; + + mpss_mem: mpss@9000000 { + reg = <0 0x09000000 0 0x5a00000>; + no-map; + }; + + tzapp: tzapp@ea00000 { + reg = <0 0x0ea00000 0 0x1900000>; + no-map; + }; + + mdm_rfsa_mem: mdm-rfsa@ca0b0000 { + reg = <0 0xca0b0000 0 0x10000>; + no-map; + }; + + rmtfs_mem: rmtfs@ca100000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0xca100000 0 0x180000>; + no-map; + + qcom,client-id = <1>; + }; + + qseecom_mem: qseecom@cb400000 { + reg = <0 0xcb400000 0 0x1c00000>; + no-mem; + }; + + adsp_rfsa_mem: adsp-rfsa@cd000000 { + reg = <0 0xcd000000 0 0x10000>; + no-map; + }; + + sensor_rfsa_mem: sensor-rfsa@cd010000 { + reg = <0 0xcd010000 0 0x10000>; + no-map; + }; + + ramoops@dfc00000 { + compatible = "ramoops"; + reg = <0 0xdfc00000 0 0x40000>; + console-size = <0x10000>; + record-size = <0x10000>; + ftrace-size = <0x10000>; + pmsg-size = <0x20000>; + }; + }; +}; + +&blsp1_i2c2 { + status = "okay"; + + /* Atmel or Synaptics touchscreen */ +}; + +&blsp1_i2c5 { + status = "okay"; + + /* ST lsm6db0 gyro/accelerometer */ +}; + +&blsp1_i2c6 { + status = "okay"; + + /* + * NXP NCI NFC, + * TI USB320 Type-C controller, + * Pericom 30216a USB (de)mux switch + */ +}; + +&blsp2_i2c1 { + status = "okay"; + + /* cm36686 proximity and ambient light sensor */ +}; + +&blsp2_i2c5 { + status = "okay"; + + /* Silabs si4705 FM transmitter */ +}; + +&blsp2_uart2 { + status = "okay"; +}; + +&pm8994_spmi_regulators { + VDD_APC0: s8 { + regulator-min-microvolt = <680000>; + regulator-max-microvolt = <1180000>; + regulator-always-on; + regulator-boot-on; + }; + + /* APC1 is 3-phase, but quoting downstream, s11 is "the gang leader" */ + VDD_APC1: s11 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1225000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&rpm_requests { + pm8994-regulators { + compatible = "qcom,rpm-pm8994-regulators"; + + vdd_l1-supply = <&pm8994_s7>; + vdd_l2_26_28-supply = <&pm8994_s3>; + vdd_l3_11-supply = <&pm8994_s3>; + vdd_l4_27_31-supply = <&pm8994_s3>; + vdd_l5_7-supply = <&pm8994_s3>; + vdd_l6_12_32-supply = <&pm8994_s5>; + vdd_l8_16_30-supply = <&vph_pwr>; + vdd_l9_10_18_22-supply = <&vph_pwr>; + vdd_l13_19_23_24-supply = <&vph_pwr>; + vdd_l14_15-supply = <&pm8994_s5>; + vdd_l17_29-supply = <&vph_pwr>; + vdd_l20_21-supply = <&vph_pwr>; + vdd_l25-supply = <&pm8994_s5>; + vdd_lvs1_2-supply = <&pm8994_s4>; + + /* S1, S2, S6 and S12 are managed by RPMPD */ + + pm8994_s3: s3 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + pm8994_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + regulator-always-on; + regulator-system-load = <325000>; + }; + + pm8994_s5: s5 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + }; + + pm8994_s7: s7 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + /* S8, S9, S10 and S11 - SPMI-managed VDD_APC */ + + pm8994_l1: l1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + pm8994_l2: l2 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + }; + + pm8994_l3: l3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8994_l4: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + /* L5 is inaccessible from RPM */ + + pm8994_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + /* L7 is inaccessible from RPM */ + + pm8994_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l11: l11 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8994_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8994_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8994_l17: l17 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8994_l18: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + pm8994_l19: l19 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8994_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-always-on; + regulator-boot-on; + regulator-allow-set-load; + regulator-system-load = <570000>; + }; + + pm8994_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-always-on; + }; + + pm8994_l22: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8994_l23: l23 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8994_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3150000>; + }; + + pm8994_l25: l25 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + pm8994_l26: l26 { + regulator-min-microvolt = <987500>; + regulator-max-microvolt = <987500>; + + }; + + pm8994_l27: l27 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + pm8994_l28: l28 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + pm8994_l29: l29 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8994_l30: l30 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l31: l31 { + regulator-min-microvolt = <1262500>; + regulator-max-microvolt = <1262500>; + }; + + pm8994_l32: l32 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_lvs1: lvs1 {}; + pm8994_lvs2: lvs2 {}; + }; + + pmi8994_regulators: pmi8994-regulators { + compatible = "qcom,rpm-pmi8994-regulators"; + vdd_s1-supply = <&vph_pwr>; + vdd_bst_byp-supply = <&vph_pwr>; + + pmi8994_s1: s1 { + regulator-min-microvolt = <1025000>; + regulator-max-microvolt = <1025000>; + }; + + /* S2 & S3 - VDD_GFX */ + + pmi8994_bby: boost-bypass { + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3600000>; + }; + }; +}; + +&sdhc1 { + status = "okay"; + + mmc-hs400-1_8v; + vmmc-supply = <&pm8994_l20>; + vqmmc-supply = <&pm8994_s4>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi new file mode 100644 index 000000000..02fc3795d --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi @@ -0,0 +1,49 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved. + */ + +#include "msm8994.dtsi" + +/* 8992 only features 2 A57 cores. */ +/delete-node/ &CPU6; +/delete-node/ &CPU7; +/delete-node/ &cpu6_map; +/delete-node/ &cpu7_map; + +&gcc { + compatible = "qcom,gcc-msm8992"; +}; + +&mmcc { + compatible = "qcom,mmcc-msm8992"; + + assigned-clock-rates = <800000000>, + <808000000>, + <1020000000>, + <960000000>, + <800000000>; +}; + +&ocmem { + reg = <0xfdd00000 0x2000>, <0xfec00000 0x100000>; + + gmu-sram@0 { + reg = <0x0 0x80000>; + }; +}; + +&rpmcc { + compatible = "qcom,rpmcc-msm8992", "qcom,rpmcc"; +}; + +&timer { + interrupts = , + , + , + ; +}; + +&tlmm { + compatible = "qcom,msm8992-pinctrl"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts new file mode 100644 index 000000000..4801d973f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts @@ -0,0 +1,64 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* Copyright (c) 2015, Huawei Inc. All rights reserved. + * Copyright (c) 2016, The Linux Foundation. All rights reserved. + * Copyright (c) 2021-2023, Petr Vorel + */ + +/dts-v1/; + +#include "msm8994.dtsi" + +/ { + model = "Huawei Nexus 6P"; + compatible = "huawei,angler", "qcom,msm8994"; + chassis-type = "handset"; + /* required for bootloader to select correct board */ + qcom,msm-id = <207 0x20000>; + qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>; + qcom,board-id = <8026 0>; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + cont_splash_mem: memory@3401000 { + reg = <0 0x03401000 0 0x1000000>; + no-map; + }; + + tzapp_mem: tzapp@4800000 { + reg = <0 0x04800000 0 0x1900000>; + no-map; + }; + + reserved@6300000 { + reg = <0 0x06300000 0 0x700000>; + no-map; + }; + }; +}; + +&blsp1_uart2 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_uart2_default>; + pinctrl-1 = <&blsp1_uart2_sleep>; +}; + +&tlmm { + gpio-reserved-ranges = <85 4>; +}; + +&sdhc1 { + status = "okay"; + mmc-hs400-1_8v; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dts b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dts new file mode 100644 index 000000000..c59341820 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio + * Copyright (c) 2020, Gustave Monce + */ + +/dts-v1/; + +#include "msm8994.dtsi" +#include "msm8994-msft-lumia-octagon.dtsi" + +/ { + model = "Microsoft Lumia 950 XL"; + compatible = "microsoft,cityman", "qcom,msm8994"; + chassis-type = "handset"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi new file mode 100644 index 000000000..c6145ee8b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi @@ -0,0 +1,910 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Common Board Device Tree for + * Microsoft Mobile MSM8994 Octagon Platforms + * + * Copyright (c) 2020, Konrad Dybcio + * Copyright (c) 2020, Gustave Monce + */ + +#include "pm8994.dtsi" +#include "pmi8994.dtsi" +#include +#include +#include + +/* + * Delete all generic (msm8994.dtsi) reserved + * memory mappings which are different in this device. + */ +/delete-node/ &adsp_mem; +/delete-node/ &audio_mem; +/delete-node/ &cont_splash_mem; +/delete-node/ &mba_mem; +/delete-node/ &mpss_mem; +/delete-node/ &peripheral_region; +/delete-node/ &rmtfs_mem; +/delete-node/ &smem_mem; + +/ { + /* + * Most Lumia 950/XL users use GRUB to load their kernels, + * hence there is no need for msm-id and friends. + */ + + /* + * This enables graphical output via bootloader-enabled display. + * acpi=no is required due to WP platforms having ACPI support, but + * only for Windows-based OSes. + */ + chosen { + bootargs = "earlycon=efifb console=efifb acpi=no"; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + }; + + clocks { + compatible = "simple-bus"; + + divclk4: divclk4 { + compatible = "fixed-clock"; + #clock-cells = <0>; + + clock-frequency = <32768>; + clock-output-names = "divclk4"; + + pinctrl-names = "default"; + pinctrl-0 = <&divclk4_pin_a>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + volup-key { + label = "Volume Up"; + gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + wakeup-source; + debounce-interval = <15>; + }; + + camsnap-key { + label = "Camera Snapshot"; + gpios = <&pm8994_gpios 4 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + wakeup-source; + debounce-interval = <15>; + }; + + camfocus-key { + label = "Camera Focus"; + gpios = <&pm8994_gpios 5 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + wakeup-source; + debounce-interval = <15>; + }; + }; + + gpio-hall-sensor { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&hall_front_default &hall_back_default>; + + label = "GPIO Hall Effect Sensor"; + + event-hall-front-sensor { + label = "Hall Effect Front Sensor"; + gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>; + linux,input-type = ; + linux,code = ; + linux,can-disable; + }; + + event-hall-back-sensor { + label = "Hall Effect Back Sensor"; + gpios = <&tlmm 75 GPIO_ACTIVE_HIGH>; + linux,input-type = ; + linux,code = ; + linux,can-disable; + }; + }; + + reserved-memory { + /* + * This device being a WP platform has a very different + * memory layout than other Android based devices. + * This memory layout is directly copied from the original + * device UEFI firmware, and adapted based on observations + * using JTAG for the Qualcomm Peripheral Image regions. + */ + + uefi_mem: memory@200000 { + reg = <0 0x200000 0 0x100000>; + no-map; + }; + + mppark_mem: memory@300000 { + reg = <0 0x300000 0 0x80000>; + no-map; + }; + + fbpt_mem: memory@380000 { + reg = <0 0x380000 0 0x1000>; + no-map; + }; + + dbg2_mem: memory@381000 { + reg = <0 0x381000 0 0x4000>; + no-map; + }; + + capsule_mem: memory@385000 { + reg = <0 0x385000 0 0x1000>; + no-map; + }; + + tpmctrl_mem: memory@386000 { + reg = <0 0x386000 0 0x3000>; + no-map; + }; + + uefiinfo_mem: memory@389000 { + reg = <0 0x389000 0 0x1000>; + no-map; + }; + + reset_mem: memory@389000 { + reg = <0 0x389000 0 0x1000>; + no-map; + }; + + resuncached_mem: memory@38e000 { + reg = <0 0x38e000 0 0x72000>; + no-map; + }; + + disp_mem: memory@400000 { + reg = <0 0x400000 0 0x800000>; + no-map; + }; + + uefistack_mem: memory@c00000 { + reg = <0 0xc00000 0 0x40000>; + no-map; + }; + + cpuvect_mem: memory@c40000 { + reg = <0 0xc40000 0 0x10000>; + no-map; + }; + + rescached_mem: memory@400000 { + reg = <0 0xc50000 0 0xb0000>; + no-map; + }; + + tzapps_mem: memory@6500000 { + reg = <0 0x6500000 0 0x500000>; + no-map; + }; + + smem_mem: memory@6a00000 { + reg = <0 0x6a00000 0 0x200000>; + no-map; + }; + + hyp_mem: memory@6c00000 { + reg = <0 0x6c00000 0 0x100000>; + no-map; + }; + + tz_mem: memory@6d00000 { + reg = <0 0x6d00000 0 0x160000>; + no-map; + }; + + rfsa_adsp_mem: memory@6e60000 { + reg = <0 0x6e60000 0 0x10000>; + no-map; + }; + + rfsa_mpss_mem: memory@6e70000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0x6e70000 0 0x10000>; + no-map; + + qcom,client-id = <1>; + }; + + /* + * Value obtained from the device original ACPI DSDT table + * MPSS_EFS / SBL + */ + mba_mem: memory@6e80000 { + reg = <0 0x6e80000 0 0x180000>; + no-map; + }; + + /* + * Peripheral Image loader region begin! + * The region reserved for pil is 0x7000000-0xef00000 + */ + + mpss_mem: memory@7000000 { + reg = <0 0x7000000 0 0x5a00000>; + no-map; + }; + + adsp_mem: memory@ca00000 { + reg = <0 0xca00000 0 0x1800000>; + no-map; + }; + + venus_mem: memory@e200000 { + reg = <0 0xe200000 0 0x500000>; + no-map; + }; + + pil_metadata_mem: memory@e700000 { + reg = <0 0xe700000 0 0x4000>; + no-map; + }; + + memory@e704000 { + reg = <0 0xe704000 0 0x7fc000>; + no-map; + }; + /* Peripheral Image loader region end */ + + cnss_mem: memory@ef00000 { + reg = <0 0xef00000 0 0x300000>; + no-map; + }; + }; +}; + +&blsp1_i2c1 { + status = "okay"; + + rmi4-i2c-dev@4b { + compatible = "syna,rmi4-i2c"; + reg = <0x4b>; + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&tlmm>; + interrupts = <77 IRQ_TYPE_EDGE_FALLING>; + + rmi4-f01@1 { + reg = <0x01>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + syna,clip-x-low = <0>; + syna,clip-x-high = <1440>; + syna,clip-y-low = <0>; + syna,clip-y-high = <2560>; + }; + }; +}; + +&blsp1_i2c2 { + status = "okay"; + + /* + * This device uses the Texas Instruments TAS2553, however the TAS2552 driver + * seems to work here. In the future a proper driver might need to + * be written for this device. + */ + tas2553: tas2553@40 { + compatible = "ti,tas2552"; + reg = <0x40>; + + vbat-supply = <&vph_pwr>; + iovdd-supply = <&vreg_s4a_1p8>; + avdd-supply = <&vreg_s4a_1p8>; + + enable-gpio = <&pm8994_gpios 12 GPIO_ACTIVE_HIGH>; + }; +}; + +&blsp1_i2c5 { + status = "okay"; + + ak09912: magnetometer@c { + compatible = "asahi-kasei,ak09912"; + reg = <0xc>; + + interrupt-parent = <&tlmm>; + interrupts = <26 IRQ_TYPE_EDGE_RISING>; + + vdd-supply = <&vreg_l18a_2p85>; + vid-supply = <&vreg_lvs2a_1p8>; + }; + + zpa2326: barometer@5c { + compatible = "murata,zpa2326"; + reg = <0x5c>; + + interrupt-parent = <&tlmm>; + interrupts = <74 IRQ_TYPE_EDGE_RISING>; + + vdd-supply = <&vreg_lvs2a_1p8>; + }; + + mpu6050: accelerometer@68 { + compatible = "invensense,mpu6500"; + reg = <0x68>; + + interrupt-parent = <&tlmm>; + interrupts = <64 IRQ_TYPE_EDGE_RISING>; + + vdd-supply = <&vreg_lvs2a_1p8>; + vddio-supply = <&vreg_lvs2a_1p8>; + }; +}; + +&blsp1_i2c6 { + status = "okay"; + + pn547: pn547@28 { + compatible = "nxp,pn544-i2c"; + + reg = <0x28>; + + interrupt-parent = <&tlmm>; + interrupts = <29 IRQ_TYPE_EDGE_RISING>; + + enable-gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>; + firmware-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&blsp2_i2c1 { + status = "okay"; + + sideinteraction: ad7147_captouch@2c { + compatible = "ad,ad7147_captouch"; + reg = <0x2c>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&grip_default>; + pinctrl-1 = <&grip_sleep>; + + interrupts = <&tlmm 96 IRQ_TYPE_EDGE_FALLING>; + + button_num = <8>; + touchpad_num = <0>; + wheel_num = <0>; + slider_num = <0>; + + vcc-supply = <&vreg_l18a_2p85>; + }; + + /* + * The QPDS-T900/QPDS-T930 is a customized part built for Nokia + * by Avago. It is very similar to the Avago APDS-9930 with some + * minor differences. In the future a proper driver might need to + * be written for this device. For now this works fine. + */ + qpdst900: qpdst900@39 { + compatible = "avago,apds9930"; + reg = <0x39>; + + interrupt-parent = <&tlmm>; + interrupts = <40 IRQ_TYPE_EDGE_FALLING>; + }; +}; + +&blsp2_i2c5 { + status = "okay"; + + fm_radio: si4705@11 { + compatible = "silabs,si470x"; + reg = <0x11>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&tlmm 93 GPIO_ACTIVE_HIGH>; + }; + + vreg_lpddr_1p1: fan53526a@6c { + compatible = "fcs,fan53526"; + reg = <0x6c>; + + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + vin-supply = <&vph_pwr>; + fcs,suspend-voltage-selector = <1>; + regulator-always-on; /* Turning off DDR power doesn't sound good. */ + }; + + /* ANX7816 HDMI bridge (needs MDSS HDMI) */ +}; + +&blsp2_spi4 { + status = "okay"; + + /* + * This device is a Lattice UC120 USB-C PD PHY. + * It is actually a Lattice iCE40 FPGA pre-programmed by + * the device firmware with a specific bitstream + * enabling USB Type C PHY functionality. + * Communication is done via a proprietary protocol over SPI. + * + * TODO: Once a proper driver is available, replace this. + */ + uc120: ice5lp2k@0 { + compatible = "lattice,ice40-fpga-mgr"; + reg = <0>; + spi-max-frequency = <5000000>; + cdone-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pmi8994_gpios 4 GPIO_ACTIVE_LOW>; + }; +}; + +&blsp2_uart2 { + status = "okay"; + + qca6174_bt: bluetooth { + compatible = "qcom,qca6174-bt"; + + enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; + clocks = <&divclk4>; + }; +}; + +&pm8994_gpios { + bt_en_gpios: bt-en-gpios-state { + pinconf { + pins = "gpio19"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + power-source = ; + qcom,drive-strength = ; + bias-pull-down; + }; + }; + + divclk4_pin_a: divclk4-state { + pinconf { + pins = "gpio18"; + function = PMIC_GPIO_FUNC_FUNC2; + power-source = ; + bias-disable; + }; + }; +}; + +&pm8994_pon { + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0 8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + linux,code = ; + }; + + resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0 8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + linux,code = ; + }; +}; + +&pmi8994_gpios { + pinctrl-0 = <&hd3ss460_pol &hd3ss460_amsel &hd3ss460_en>; + pinctrl-names = "default"; + + /* + * This device uses a TI HD3SS460 Type-C MUX + * As this device has no driver currently, + * the configuration for USB Face Up is set-up here. + * + * TODO: remove once a driver is available + * TODO: add VBUS GPIO 5 + */ + hd3ss460_pol: pol-low-state { + pins = "gpio8"; + function = PMIC_GPIO_FUNC_NORMAL; + qcom,drive-strength = <3>; + bias-pull-down; + }; + + hd3ss460_amsel: amsel-high-state { + pins = "gpio9"; + function = PMIC_GPIO_FUNC_NORMAL; + qcom,drive-strength = <1>; + bias-pull-up; + }; + + hd3ss460_en: en-high-state { + pins = "gpio10"; + function = PMIC_GPIO_FUNC_NORMAL; + qcom,drive-strength = <1>; + bias-pull-up; + }; +}; + +&pmi8994_spmi_regulators { + vdd_gfx: s2 { + regulator-min-microvolt = <980000>; + regulator-max-microvolt = <980000>; + }; +}; + +&rpm_requests { + /* These values were taken from the original firmware ACPI tables */ + pm8994_regulators: pm8994-regulators { + compatible = "qcom,rpm-pm8994-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_s8-supply = <&vph_pwr>; + vdd_s9-supply = <&vph_pwr>; + vdd_s10-supply = <&vph_pwr>; + vdd_s11-supply = <&vph_pwr>; + vdd_s12-supply = <&vph_pwr>; + vdd_l1-supply = <&vreg_s1b_1p0>; + vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>; + vdd_l3_l11-supply = <&vreg_s3a_1p3>; + vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>; + vdd_l5_l7-supply = <&vreg_s5a_2p15>; + vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>; + vdd_l8_l16_l30-supply = <&vph_pwr>; + vdd_l9_l10_l18_l22-supply = <&vph_pwr_bbyp>; + vdd_l13_l19_l23_l24-supply = <&vph_pwr_bbyp>; + vdd_l14_l15-supply = <&vreg_s5a_2p15>; + vdd_l17_l29-supply = <&vph_pwr_bbyp>; + vdd_l20_l21-supply = <&vph_pwr_bbyp>; + vdd_l25-supply = <&vreg_s5a_2p15>; + vdd_lvs1_2-supply = <&vreg_s4a_1p8>; + + /* S1, S2, S6 and S12 are managed by RPMPD */ + + vreg_s3a_1p3: s3 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-allow-set-load; + regulator-system-load = <300000>; + }; + + vreg_s4a_1p8: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + regulator-always-on; + regulator-system-load = <325000>; + }; + + vreg_s5a_2p15: s5 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + regulator-allow-set-load; + regulator-system-load = <325000>; + }; + + vreg_s7a_1p0: s7 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + /* + * S8 - SPMI-managed VDD_APC0 + * S9, S10 and S11 (the main one) - SPMI-managed VDD_APC1 + */ + + vreg_l1a_1p0: l1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_l2a_1p25: l2 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-allow-set-load; + regulator-system-load = <4160>; + }; + + vreg_l3a_1p2: l3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <80000>; + }; + + vreg_l4a_1p225: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + /* L5 is inaccessible from RPM */ + + vreg_l6a_1p8: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + regulator-system-load = <1000>; + }; + + /* L7 is inaccessible from RPM */ + + vreg_l8a_1p8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l9a_1p8: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l10a_1p8: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l11a_1p2: l11 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <35000>; + }; + + vreg_l12a_1p8: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <50000>; + }; + + vreg_l13a_2p95: l13 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <2950000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <22000>; + }; + + vreg_l14a_1p8: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <52000>; + }; + + vreg_l15a_1p8: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l16a_2p7: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + vreg_l17a_2p7: l17 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <300000>; + }; + + vreg_l18a_2p85: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <600000>; + }; + + vreg_l19a_3p3: l19 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <500000>; + }; + + vreg_l20a_2p95: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-always-on; + regulator-boot-on; + regulator-allow-set-load; + regulator-system-load = <570000>; + }; + + vreg_l21a_2p95: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <800000>; + }; + + vreg_l22a_3p0: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <150000>; + }; + + vreg_l23a_2p8: l23 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <80000>; + }; + + vreg_l24a_3p075: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3150000>; + regulator-allow-set-load; + regulator-system-load = <5800>; + }; + + vreg_l25a_1p1: l25 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <80000>; + }; + + vreg_l26a_1p0: l26 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_l27a_1p05: l27 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <500000>; + }; + + vreg_l28a_1p0: l28 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <26000>; + }; + + vreg_l29a_2p8: l29 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <80000>; + }; + + vreg_l30a_1p8: l30 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <2500>; + }; + + vreg_l31a_1p2: l31 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <600000>; + }; + + vreg_l32a_1p8: l32 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_lvs1a_1p8: lvs1 { }; + + vreg_lvs2a_1p8: lvs2 { }; + }; + + pmi8994_regulators: pmi8994-regulators { + compatible = "qcom,rpm-pmi8994-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_bst_byp-supply = <&vph_pwr>; + + vreg_s1b_1p0: s1 { + regulator-min-microvolt = <1025000>; + regulator-max-microvolt = <1025000>; + }; + + /* S2 & S3 - VDD_GFX */ + + vph_pwr_bbyp: boost-bypass { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + }; +}; + +&sdhc1 { + status = "okay"; + + /* + * This device is shipped with HS400 capabable eMMCs + * However various brands have been used in various product batches, + * including a Samsung eMMC (BGND3R) which features a quirk with HS400. + * Set the speed to HS200 as a safety measure. + */ + mmc-hs200-1_8v; +}; + +&sdhc2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; + + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vreg_l13a_2p95>; + + cd-gpios = <&pm8994_gpios 8 GPIO_ACTIVE_LOW>; +}; + +&tlmm { + grip_default: grip-default { + pins = "gpio39"; + function = "gpio"; + drive-strength = <6>; + bias-pull-down; + }; + + grip_sleep: grip-sleep { + pins = "gpio39"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + hall_front_default: hall-front-default { + pins = "gpio42"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + hall_back_default: hall-back-default { + pins = "gpio75"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-ivy.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-ivy.dts new file mode 100644 index 000000000..99388b019 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-ivy.dts @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio + */ + +/dts-v1/; + +#include "msm8994-sony-xperia-kitakami.dtsi" + +/ { + model = "Sony Xperia Z3+/Z4"; + compatible = "sony,ivy-row", "qcom,msm8994"; + chassis-type = "handset"; +}; + +&pm8994_l3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; +}; + +&pm8994_l17 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; +}; + +/delete-node/ &pm8994_l19; +/delete-node/ &pm8994_l32; diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-karin.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-karin.dts new file mode 100644 index 000000000..71758d2cf --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-karin.dts @@ -0,0 +1,46 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio + */ + +/dts-v1/; + +#include "msm8994-sony-xperia-kitakami.dtsi" + +/ { + model = "Sony Xperia Z4 Tablet (LTE)"; + compatible = "sony,karin-row", "qcom,msm8994"; + chassis-type = "tablet"; +}; + +&blsp2_i2c5 { + /* + * TI LP8557 backlight driver @ 2c + * AD AD7146 touch controller @ 2f + * sii8620 HDMI/MHL bridge @ 72 (kitakami-common) + */ +}; + +&pm8994_l3 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; +}; + +&pm8994_l17 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; +}; + +&pm8994_l22 { + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3100000>; +}; + +&pm8994_l25 { + regulator-min-microvolt = <1037500>; + regulator-max-microvolt = <1037500>; +}; + +/delete-node/ &pm8994_l32; +/* Z4 tablets use a different touchscreen. */ +/delete-node/ &touchscreen; diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-satsuki.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-satsuki.dts new file mode 100644 index 000000000..69b7df0ed --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-satsuki.dts @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio + */ + +/dts-v1/; + +#include "msm8994-sony-xperia-kitakami.dtsi" + +/ { + model = "Sony Xperia Z5 Premium"; + compatible = "sony,satsuki-row", "qcom,msm8994"; + chassis-type = "handset"; +}; + +&pm8994_l14 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1850000>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts new file mode 100644 index 000000000..466508cd8 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio + */ + +/dts-v1/; + +#include "msm8994-sony-xperia-kitakami.dtsi" + +/ { + model = "Sony Xperia Z5"; + compatible = "sony,sumire-row", "qcom,msm8994"; + chassis-type = "handset"; +}; + +/delete-node/ &pm8994_l19; diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-suzuran.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-suzuran.dts new file mode 100644 index 000000000..76bf50191 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-suzuran.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio + */ + +/dts-v1/; + +#include "msm8994-sony-xperia-kitakami.dtsi" + +/ { + model = "Sony Xperia Z5 Compact"; + compatible = "sony,suzuran-row", "qcom,msm8994"; + chassis-type = "handset"; +}; + +&pm8994_l14 { + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; +}; + +/delete-node/ &pm8994_l19; diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi new file mode 100644 index 000000000..2ecf455db --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi @@ -0,0 +1,492 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio + */ + +#include "msm8994.dtsi" +#include "pm8994.dtsi" +#include "pmi8994.dtsi" +#include +#include + +/ { + /* required for bootloader to select correct board */ + + /* + * We support MSM8994 v2 (0x20000) and v2.1 (0x20001). + * The V1 chip (0x0 and 0x10000) is significantly different + * and requires driver-side changes (including CPR, be warned!!). + * Besides that, it's very rare. + */ + qcom,msm-id = <207 0x20000>, <207 0x20001>; + /* We only use pm8994+pmi8994. */ + qcom,pmic-id = <0x10009 0x1000a 0x00 0x00>; + /* This property is shared across all kitakami devices. */ + qcom,board-id = <8 0>; + + /* Kitakami firmware doesn't support PSCI */ + /delete-node/ psci; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + button-0 { + label = "Volume Down"; + gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + wakeup-source; + debounce-interval = <15>; + }; + + button-1 { + label = "Volume Up"; + gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + wakeup-source; + debounce-interval = <15>; + }; + + button-2 { + label = "Camera Snapshot"; + gpios = <&pm8994_gpios 4 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + wakeup-source; + debounce-interval = <15>; + }; + + button-3 { + label = "Camera Focus"; + gpios = <&pm8994_gpios 5 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + wakeup-source; + debounce-interval = <15>; + }; + }; + + reserved-memory { + /* This is for getting crash logs using Android downstream kernels */ + ramoops@1fe00000 { + compatible = "ramoops"; + reg = <0 0x1fe00000 0 0x200000>; + console-size = <0x100000>; + record-size = <0x10000>; + ftrace-size = <0x10000>; + pmsg-size = <0x80000>; + }; + + fb_region: fb_region@40000000 { + reg = <0 0x40000000 0 0x1000000>; + no-map; + }; + + tzapp: memory@c7800000 { + reg = <0 0xc7800000 0 0x1900000>; + no-map; + }; + }; +}; + +&blsp1_spi1 { + status = "okay"; + + /* FPC fingerprint reader */ +}; + +/* I2C1 is disabled on this board */ + +&blsp1_i2c2 { + status = "okay"; + clock-frequency = <355000>; + + /* NXP PN547 NFC */ +}; + +&blsp1_i2c6 { + status = "okay"; + clock-frequency = <355000>; + + touchscreen: rmi4-i2c-dev@2c { + compatible = "syna,rmi4-i2c"; + reg = <0x2c>; + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&tlmm>; + interrupts = <42 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_active &ts_reset_active>; + + vdd-supply = <&pm8994_l22>; + vio-supply = <&pm8994_s4>; + + syna,reset-delay-ms = <220>; + syna,startup-delay-ms = <220>; + + rmi4-f01@1 { + reg = <0x01>; + syna,nosleep-mode = <1>; + }; + + rmi4-f11@11 { + reg = <0x11>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&blsp2_i2c5 { + status = "okay"; + clock-frequency = <355000>; + + /* sii8620 HDMI/MHL bridge */ +}; + +&blsp2_uart2 { + status = "okay"; +}; + +/* + * Kitakami bootloader only turns cont_splash on when it detects + * specific downstream MDSS/backlight nodes in the active DTB. + * One way to use that framebuffer is to load a secondary instance of + * LK with the downstream DTB appended and then, only from there, load + * mainline Linux. + */ +&cont_splash_mem { + reg = <0 0x3401000 0 0x2200000>; +}; + +&pmi8994_spmi_regulators { + /* + * Yeah, this one *is* managed by RPMPD, but also needs + * to be hacked up as a-o due to the GPU device only accepting a single + * power domain.. which still isn't enough and forces us to bind + * OXILI_CX and OXILI_GX together! + */ + vdd_gfx: s2 { + regulator-name = "VDD_GFX"; + regulator-min-microvolt = <980000>; + regulator-max-microvolt = <980000>; + + /* hack until we rig up the gpu consumer */ + regulator-always-on; + }; +}; + +&rpm_requests { + /* PMI8994 should probe first, because pmi8994_bby supplies some of PM8994's regulators */ + pmi8994_regulators: pmi8994-regulators { + compatible = "qcom,rpm-pmi8994-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_bst_byp-supply = <&vph_pwr>; + + pmi8994_s1: s1 { + regulator-min-microvolt = <1025000>; + regulator-max-microvolt = <1025000>; + }; + + /* S2 & S3 - VDD_GFX */ + + pmi8994_bby: boost-bypass { + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3600000>; + }; + }; + + pm8994_regulators: pm8994-regulators { + compatible = "qcom,rpm-pm8994-regulators"; + + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_l1-supply = <&pmi8994_s1>; + vdd_l2_l26_l28-supply = <&pm8994_s3>; + vdd_l3_l11-supply = <&pm8994_s3>; + vdd_l4_l27_l31-supply = <&pm8994_s3>; + vdd_l6_l12_l32-supply = <&pm8994_s5>; + vdd_l8_l16_l30-supply = <&vph_pwr>; + vdd_l9_l10_l18_l22-supply = <&pmi8994_bby>; + vdd_l13_l19_l23_l24-supply = <&pmi8994_bby>; + vdd_l14_l15-supply = <&pm8994_s5>; + vdd_l17_l29-supply = <&pmi8994_bby>; + vdd_l20_l21-supply = <&pmi8994_bby>; + vdd_l25-supply = <&pm8994_s3>; + vdd_lvs1_2-supply = <&pm8994_s4>; + + /* S1, S2, S6 and S12 are managed by RPMPD */ + + pm8994_s3: s3 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + pm8994_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-system-load = <325000>; + regulator-allow-set-load; + regulator-always-on; + }; + + pm8994_s5: s5 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + }; + + pm8994_s7: s7 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + /* + * S8 - SPMI-managed VDD_APC0 + * S9, S10 and S11 (the main one) - SPMI-managed VDD_APC1 + */ + + pm8994_l1: l1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + pm8994_l2: l2 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-system-load = <10000>; + regulator-allow-set-load; + }; + + pm8994_l3: l3 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + }; + + pm8994_l4: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + /* L5 is inaccessible from RPM */ + + pm8994_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + /* L7 is inaccessible from RPM */ + + pm8994_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l11: l11 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8994_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-system-load = <10000>; + regulator-allow-set-load; + }; + + pm8994_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8994_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-system-load = <10000>; + regulator-allow-set-load; + regulator-boot-on; + }; + + pm8994_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8994_l17: l17 { + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + regulator-boot-on; + }; + + pm8994_l18: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8994_l19: l19 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-boot-on; + }; + + pm8994_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <570000>; + regulator-allow-set-load; + }; + + pm8994_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <800000>; + regulator-allow-set-load; + }; + + pm8994_l22: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + }; + + pm8994_l23: l23 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8994_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3150000>; + }; + + pm8994_l25: l25 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + }; + + pm8994_l26: l26 { + regulator-min-microvolt = <987500>; + regulator-max-microvolt = <987500>; + }; + + pm8994_l27: l27 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + }; + + pm8994_l28: l28 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-system-load = <10000>; + regulator-allow-set-load; + }; + + pm8994_l29: l29 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + regulator-boot-on; + }; + + pm8994_l30: l30 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + pm8994_l31: l31 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-system-load = <10000>; + regulator-allow-set-load; + }; + + pm8994_l32: l32 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_lvs1: lvs1 { + regulator-boot-on; + }; + pm8994_lvs2: lvs2 { + regulator-boot-on; + }; + }; +}; + +&sdhc1 { + /* + * There is an issue with the eMMC causing permanent + * damage to the card if a quirk isn't addressed. + * Until it's fixed, disable the MMC so as not to brick + * devices. + */ + status = "disabled"; + + /* + * Downstream pushes 2.95V to the sdhci device, + * but upstream driver REALLY wants to make vmmc 1.8v + * cause of the hs400-1_8v mode. MMC works fine without + * that regulator, so let's not use it for now. + * vqmmc is also disabled cause driver stll complains. + * + * vmmc-supply = <&pm8994_l20>; + * vqmmc-supply = <&pm8994_s4>; + */ +}; + +&sdhc2 { + status = "okay"; + + cd-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>; + vmmc-supply = <&pm8994_l21>; + vqmmc-supply = <&pm8994_l13>; +}; + +&tlmm { + ts_int_active: ts-int-active { + pins = "gpio42"; + drive-strength = <2>; + bias-disable; + input-enable; + }; + + ts_reset_active: ts-reset-active { + pins = "gpio109"; + drive-strength = <2>; + bias-disable; + output-low; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi new file mode 100644 index 000000000..3c6c2cf99 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi @@ -0,0 +1,1110 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* Copyright (c) 2013-2016, The Linux Foundation. All rights reserved. + */ + +#include +#include +#include +#include +#include +#include + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + aliases { + mmc1 = &sdhc1; + mmc2 = &sdhc2; + }; + + chosen { }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + clock-output-names = "xo_board"; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "sleep_clk"; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x1>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x2>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x3>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU4: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x100>; + enable-method = "psci"; + next-level-cache = <&L2_1>; + L2_1: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + CPU5: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x101>; + enable-method = "psci"; + next-level-cache = <&L2_1>; + }; + + CPU6: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x102>; + enable-method = "psci"; + next-level-cache = <&L2_1>; + }; + + CPU7: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x103>; + enable-method = "psci"; + next-level-cache = <&L2_1>; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + }; + + cluster1 { + core0 { + cpu = <&CPU4>; + }; + + core1 { + cpu = <&CPU5>; + }; + + cpu6_map: core2 { + cpu = <&CPU6>; + }; + + cpu7_map: core3 { + cpu = <&CPU7>; + }; + }; + }; + }; + + firmware { + scm { + compatible = "qcom,scm-msm8994", "qcom,scm"; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the reg */ + reg = <0 0x80000000 0 0>; + }; + + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = ; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "hvc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + dfps_data_mem: dfps_data_mem@3400000 { + reg = <0 0x03400000 0 0x1000>; + no-map; + }; + + cont_splash_mem: memory@3401000 { + reg = <0 0x03401000 0 0x2200000>; + no-map; + }; + + smem_mem: smem_region@6a00000 { + reg = <0 0x06a00000 0 0x200000>; + no-map; + }; + + mpss_mem: memory@7000000 { + reg = <0 0x07000000 0 0x5a00000>; + no-map; + }; + + peripheral_region: memory@ca00000 { + reg = <0 0x0ca00000 0 0x1f00000>; + no-map; + }; + + rmtfs_mem: memory@c6400000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0xc6400000 0 0x180000>; + no-map; + + qcom,client-id = <1>; + }; + + mba_mem: memory@c6700000 { + reg = <0 0xc6700000 0 0x100000>; + no-map; + }; + + audio_mem: memory@c7000000 { + reg = <0 0xc7000000 0 0x800000>; + no-map; + }; + + adsp_mem: memory@c9400000 { + reg = <0 0xc9400000 0 0x3f00000>; + no-map; + }; + + reserved@6c00000 { + reg = <0 0x06c00000 0 0x400000>; + no-map; + }; + }; + + smd { + compatible = "qcom,smd"; + rpm { + interrupts = ; + qcom,ipc = <&apcs 8 0>; + qcom,smd-edge = <15>; + qcom,remote-pid = <6>; + + rpm_requests: rpm-requests { + compatible = "qcom,rpm-msm8994"; + qcom,smd-channels = "rpm_requests"; + + rpmcc: rpmcc { + compatible = "qcom,rpmcc-msm8994", "qcom,rpmcc"; + #clock-cells = <1>; + }; + + rpmpd: power-controller { + compatible = "qcom,msm8994-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp_ret: opp1 { + opp-level = <1>; + }; + rpmpd_opp_svs_krait: opp2 { + opp-level = <2>; + }; + rpmpd_opp_svs_soc: opp3 { + opp-level = <3>; + }; + rpmpd_opp_nom: opp4 { + opp-level = <4>; + }; + rpmpd_opp_turbo: opp5 { + opp-level = <5>; + }; + rpmpd_opp_super_turbo: opp6 { + opp-level = <6>; + }; + }; + }; + }; + }; + }; + + smem { + compatible = "qcom,smem"; + memory-region = <&smem_mem>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + hwlocks = <&tcsr_mutex 3>; + }; + + smp2p-lpass { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupts = ; + + qcom,ipc = <&apcs 8 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-modem { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + + interrupt-parent = <&intc>; + interrupts = ; + + qcom,ipc = <&apcs 8 14>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc { + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + compatible = "simple-bus"; + + intc: interrupt-controller@f9000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0xf9000000 0x1000>, + <0xf9002000 0x1000>; + }; + + apcs: mailbox@f900d000 { + compatible = "qcom,msm8994-apcs-kpss-global", "syscon"; + reg = <0xf900d000 0x2000>; + #mbox-cells = <1>; + }; + + watchdog@f9017000 { + compatible = "qcom,apss-wdt-msm8994", "qcom,kpss-wdt"; + reg = <0xf9017000 0x1000>; + interrupts = , + ; + clocks = <&sleep_clk>; + timeout-sec = <10>; + }; + + timer@f9020000 { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0xf9020000 0x1000>; + + frame@f9021000 { + frame-number = <0>; + interrupts = , + ; + reg = <0xf9021000 0x1000>, + <0xf9022000 0x1000>; + }; + + frame@f9023000 { + frame-number = <1>; + interrupts = ; + reg = <0xf9023000 0x1000>; + status = "disabled"; + }; + + frame@f9024000 { + frame-number = <2>; + interrupts = ; + reg = <0xf9024000 0x1000>; + status = "disabled"; + }; + + frame@f9025000 { + frame-number = <3>; + interrupts = ; + reg = <0xf9025000 0x1000>; + status = "disabled"; + }; + + frame@f9026000 { + frame-number = <4>; + interrupts = ; + reg = <0xf9026000 0x1000>; + status = "disabled"; + }; + + frame@f9027000 { + frame-number = <5>; + interrupts = ; + reg = <0xf9027000 0x1000>; + status = "disabled"; + }; + + frame@f9028000 { + frame-number = <6>; + interrupts = ; + reg = <0xf9028000 0x1000>; + status = "disabled"; + }; + }; + + usb3: usb@f92f8800 { + compatible = "qcom,msm8994-dwc3", "qcom,dwc3"; + reg = <0xf92f8800 0x400>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_USB30_MASTER_CLK>, + <&gcc GCC_SYS_NOC_USB3_AXI_CLK>, + <&gcc GCC_USB30_SLEEP_CLK>, + <&gcc GCC_USB30_MOCK_UTMI_CLK>; + clock-names = "core", + "iface", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_MASTER_CLK>; + assigned-clock-rates = <19200000>, <120000000>; + + power-domains = <&gcc USB30_GDSC>; + qcom,select-utmi-as-pipe-clk; + + usb@f9200000 { + compatible = "snps,dwc3"; + reg = <0xf9200000 0xcc00>; + interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + maximum-speed = "high-speed"; + dr_mode = "peripheral"; + }; + }; + + sdhc1: mmc@f9824900 { + compatible = "qcom,msm8994-sdhci", "qcom,sdhci-msm-v4"; + reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>; + reg-names = "hc", "core"; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&xo_board>; + clock-names = "iface", "core", "xo"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>; + + bus-width = <8>; + non-removable; + status = "disabled"; + }; + + sdhc2: mmc@f98a4900 { + compatible = "qcom,msm8994-sdhci", "qcom,sdhci-msm-v4"; + reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; + reg-names = "hc", "core"; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&xo_board>; + clock-names = "iface", "core", "xo"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; + + cd-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>; + bus-width = <4>; + status = "disabled"; + }; + + blsp1_dma: dma-controller@f9904000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0xf9904000 0x19000>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + num-channels = <24>; + qcom,num-ees = <4>; + }; + + blsp1_uart2: serial@f991e000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf991e000 0x1000>; + interrupts = ; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_uart2_default>; + pinctrl-1 = <&blsp1_uart2_sleep>; + status = "disabled"; + }; + + blsp1_i2c1: i2c@f9923000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0xf9923000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + dmas = <&blsp1_dma 12>, <&blsp1_dma 13>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c1_default>; + pinctrl-1 = <&i2c1_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp1_spi1: spi@f9923000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0xf9923000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + spi-max-frequency = <19200000>; + dmas = <&blsp1_dma 12>, <&blsp1_dma 13>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_spi1_default>; + pinctrl-1 = <&blsp1_spi1_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp1_i2c2: i2c@f9924000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0xf9924000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + dmas = <&blsp1_dma 14>, <&blsp1_dma 15>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c2_default>; + pinctrl-1 = <&i2c2_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + /* I2C3 doesn't exist */ + + blsp1_i2c4: i2c@f9926000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0xf9926000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + dmas = <&blsp1_dma 18>, <&blsp1_dma 19>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c4_default>; + pinctrl-1 = <&i2c4_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp1_i2c5: i2c@f9927000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0xf9927000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + dmas = <&blsp2_dma 20>, <&blsp2_dma 21>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c5_default>; + pinctrl-1 = <&i2c5_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp1_i2c6: i2c@f9928000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0xf9928000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + dmas = <&blsp1_dma 22>, <&blsp1_dma 23>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c6_default>; + pinctrl-1 = <&i2c6_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp2_dma: dma-controller@f9944000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0xf9944000 0x19000>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + num-channels = <24>; + qcom,num-ees = <4>; + }; + + blsp2_uart2: serial@f995e000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf995e000 0x1000>; + interrupts = ; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + dmas = <&blsp2_dma 2>, <&blsp2_dma 3>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_uart2_default>; + pinctrl-1 = <&blsp2_uart2_sleep>; + status = "disabled"; + }; + + blsp2_i2c1: i2c@f9963000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0xf9963000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + dmas = <&blsp2_dma 12>, <&blsp2_dma 13>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c7_default>; + pinctrl-1 = <&i2c7_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp2_spi4: spi@f9966000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0xf9966000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_QUP4_SPI_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + spi-max-frequency = <19200000>; + dmas = <&blsp2_dma 18>, <&blsp2_dma 19>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_spi10_default>; + pinctrl-1 = <&blsp2_spi10_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp2_i2c5: i2c@f9967000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0xf9967000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <355000>; + dmas = <&blsp2_dma 20>, <&blsp2_dma 21>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c11_default>; + pinctrl-1 = <&i2c11_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + gcc: clock-controller@fc400000 { + compatible = "qcom,gcc-msm8994"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0xfc400000 0x2000>; + + clock-names = "xo", "sleep"; + clocks = <&xo_board>, <&sleep_clk>; + }; + + rpm_msg_ram: sram@fc428000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0xfc428000 0x4000>; + }; + + restart@fc4ab000 { + compatible = "qcom,pshold"; + reg = <0xfc4ab000 0x4>; + }; + + spmi_bus: spmi@fc4cf000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0xfc4cf000 0x1000>, + <0xfc4cb000 0x1000>, + <0xfc4ca000 0x1000>; + reg-names = "core", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = ; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + tcsr_mutex: hwlock@fd484000 { + compatible = "qcom,msm8994-tcsr-mutex", "qcom,tcsr-mutex"; + reg = <0xfd484000 0x1000>; + #hwlock-cells = <1>; + }; + + tlmm: pinctrl@fd510000 { + compatible = "qcom,msm8994-pinctrl"; + reg = <0xfd510000 0x4000>; + interrupts = ; + gpio-controller; + gpio-ranges = <&tlmm 0 0 146>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + blsp1_uart2_default: blsp1-uart2-default { + function = "blsp_uart2"; + pins = "gpio4", "gpio5"; + drive-strength = <16>; + bias-disable; + }; + + blsp1_uart2_sleep: blsp1-uart2-sleep { + function = "gpio"; + pins = "gpio4", "gpio5"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp2_uart2_default: blsp2-uart2-default { + function = "blsp_uart8"; + pins = "gpio45", "gpio46", + "gpio47", "gpio48"; + drive-strength = <16>; + bias-disable; + }; + + blsp2_uart2_sleep: blsp2-uart2-sleep { + function = "gpio"; + pins = "gpio45", "gpio46", + "gpio47", "gpio48"; + drive-strength = <2>; + bias-disable; + }; + + i2c1_default: i2c1-default { + function = "blsp_i2c1"; + pins = "gpio2", "gpio3"; + drive-strength = <2>; + bias-disable; + }; + + i2c1_sleep: i2c1-sleep { + function = "gpio"; + pins = "gpio2", "gpio3"; + drive-strength = <2>; + bias-disable; + }; + + i2c2_default: i2c2-default { + function = "blsp_i2c2"; + pins = "gpio6", "gpio7"; + drive-strength = <2>; + bias-disable; + }; + + i2c2_sleep: i2c2-sleep { + function = "gpio"; + pins = "gpio6", "gpio7"; + drive-strength = <2>; + bias-disable; + }; + + i2c4_default: i2c4-default { + function = "blsp_i2c4"; + pins = "gpio19", "gpio20"; + drive-strength = <2>; + bias-disable; + }; + + i2c4_sleep: i2c4-sleep { + function = "gpio"; + pins = "gpio19", "gpio20"; + drive-strength = <2>; + bias-pull-down; + input-enable; + }; + + i2c5_default: i2c5-default { + function = "blsp_i2c5"; + pins = "gpio23", "gpio24"; + drive-strength = <2>; + bias-disable; + }; + + i2c5_sleep: i2c5-sleep { + function = "gpio"; + pins = "gpio23", "gpio24"; + drive-strength = <2>; + bias-disable; + }; + + i2c6_default: i2c6-default { + function = "blsp_i2c6"; + pins = "gpio28", "gpio27"; + drive-strength = <2>; + bias-disable; + }; + + i2c6_sleep: i2c6-sleep { + function = "gpio"; + pins = "gpio28", "gpio27"; + drive-strength = <2>; + bias-disable; + }; + + i2c7_default: i2c7-default { + function = "blsp_i2c7"; + pins = "gpio44", "gpio43"; + drive-strength = <2>; + bias-disable; + }; + + i2c7_sleep: i2c7-sleep { + function = "gpio"; + pins = "gpio44", "gpio43"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_spi10_default: blsp2-spi10-default { + default { + function = "blsp_spi10"; + pins = "gpio53", "gpio54", "gpio55"; + drive-strength = <10>; + bias-pull-down; + }; + cs { + function = "gpio"; + pins = "gpio55"; + drive-strength = <2>; + bias-disable; + }; + }; + + blsp2_spi10_sleep: blsp2-spi10-sleep { + pins = "gpio53", "gpio54", "gpio55"; + drive-strength = <2>; + bias-disable; + }; + + i2c11_default: i2c11-default { + function = "blsp_i2c11"; + pins = "gpio83", "gpio84"; + drive-strength = <2>; + bias-disable; + }; + + i2c11_sleep: i2c11-sleep { + function = "gpio"; + pins = "gpio83", "gpio84"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_spi1_default: blsp1-spi1-default { + default { + function = "blsp_spi1"; + pins = "gpio0", "gpio1", "gpio3"; + drive-strength = <10>; + bias-pull-down; + }; + cs { + function = "gpio"; + pins = "gpio8"; + drive-strength = <2>; + bias-disable; + }; + }; + + blsp1_spi1_sleep: blsp1-spi1-sleep { + pins = "gpio0", "gpio1", "gpio3"; + drive-strength = <2>; + bias-disable; + }; + + sdc1_clk_on: clk-on { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <16>; + }; + + sdc1_clk_off: clk-off { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; + + sdc1_cmd_on: cmd-on { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <8>; + }; + + sdc1_cmd_off: cmd-off { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + sdc1_data_on: data-on { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <8>; + }; + + sdc1_data_off: data-off { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + + sdc1_rclk_on: rclk-on { + pins = "sdc1_rclk"; + bias-pull-down; + }; + + sdc1_rclk_off: rclk-off { + pins = "sdc1_rclk"; + bias-pull-down; + }; + + sdc2_clk_on: sdc2-clk-on { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <10>; + }; + + sdc2_clk_off: sdc2-clk-off { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + + sdc2_cmd_on: sdc2-cmd-on { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + sdc2_cmd_off: sdc2-cmd-off { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + sdc2_data_on: sdc2-data-on { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + + sdc2_data_off: sdc2-data-off { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + mmcc: clock-controller@fd8c0000 { + compatible = "qcom,mmcc-msm8994"; + reg = <0xfd8c0000 0x5200>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + + clock-names = "xo", + "gpll0", + "mmssnoc_ahb", + "oxili_gfx3d_clk_src", + "dsi0pll", + "dsi0pllbyte", + "dsi1pll", + "dsi1pllbyte", + "hdmipll"; + clocks = <&xo_board>, + <&gcc GPLL0_OUT_MMSSCC>, + <&rpmcc RPM_SMD_MMSSNOC_AHB_CLK>, + <&rpmcc RPM_SMD_GFX3D_CLK_SRC>, + <0>, + <0>, + <0>, + <0>, + <0>; + + assigned-clocks = <&mmcc MMPLL0_PLL>, + <&mmcc MMPLL1_PLL>, + <&mmcc MMPLL3_PLL>, + <&mmcc MMPLL4_PLL>, + <&mmcc MMPLL5_PLL>; + assigned-clock-rates = <800000000>, + <1167000000>, + <1020000000>, + <960000000>, + <600000000>; + }; + + ocmem: sram@fdd00000 { + compatible = "qcom,msm8974-ocmem"; + reg = <0xfdd00000 0x2000>, + <0xfec00000 0x200000>; + reg-names = "ctrl", "mem"; + ranges = <0 0xfec00000 0x200000>; + clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, + <&mmcc OCMEMCX_OCMEMNOC_CLK>; + clock-names = "core", "iface"; + + #address-cells = <1>; + #size-cells = <1>; + + gmu_sram: gmu-sram@0 { + reg = <0x0 0x180000>; + }; + }; + }; + + timer: timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + regulator-always-on; + }; +}; + diff --git a/arch/arm64/boot/dts/qcom/msm8996-mtp.dts b/arch/arm64/boot/dts/qcom/msm8996-mtp.dts new file mode 100644 index 000000000..596ad4c89 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8996-mtp.dts @@ -0,0 +1,33 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include "msm8996.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. MSM 8996 MTP"; + compatible = "qcom,msm8996-mtp", "qcom,msm8996"; + + aliases { + serial0 = &blsp2_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; +}; + +&blsp2_uart2 { + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_phy { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dts b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dts new file mode 100644 index 000000000..4a0645db0 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dts @@ -0,0 +1,28 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, AngeloGioacchino Del Regno + * + * Copyright (c) 2021, Konrad Dybcio + */ + +/dts-v1/; + +#include "msm8996-sony-xperia-tone.dtsi" + +/ { + model = "Sony Xperia X Performance"; + compatible = "sony,dora-row", "qcom,msm8996"; + chassis-type = "handset"; +}; + +/delete-node/ &tof_sensor; +/delete-node/ &pm8994_l11; +/delete-node/ &pm8994_l14; + +&usb_detect { + pins = "gpio24"; +}; + +&usb3_id { + id-gpio = <&tlmm 24 GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-kagura.dts b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-kagura.dts new file mode 100644 index 000000000..d3100ddf9 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-kagura.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, AngeloGioacchino Del Regno + * + * Copyright (c) 2021, Konrad Dybcio + */ + +/dts-v1/; + +#include "msm8996-sony-xperia-tone.dtsi" + +/ { + model = "Sony Xperia XZ"; + compatible = "sony,kagura-row", "qcom,msm8996"; + chassis-type = "handset"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-keyaki.dts b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-keyaki.dts new file mode 100644 index 000000000..3e5bdaba8 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-keyaki.dts @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, AngeloGioacchino Del Regno + * + * Copyright (c) 2021, Konrad Dybcio + */ + +/dts-v1/; + +#include "msm8996-sony-xperia-tone.dtsi" + +/ { + model = "Sony Xperia XZs"; + compatible = "sony,keyaki-row", "qcom,msm8996"; + chassis-type = "handset"; +}; + +&pm8994_l19 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; +}; + +&pm8994_l30 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-pull-down; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi new file mode 100644 index 000000000..a60decd89 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi @@ -0,0 +1,959 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, AngeloGioacchino Del Regno + * + * Copyright (c) 2021, Konrad Dybcio + */ + +#include "msm8996.dtsi" +#include "pm8994.dtsi" +#include "pmi8994.dtsi" +#include "pmi8996.dtsi" +#include +#include +#include +#include + +/delete-node/ &adsp_mem; +/delete-node/ &slpi_mem; +/delete-node/ &venus_mem; +/delete-node/ &gpu_mem; + +/ { + qcom,msm-id = <246 0x30001>; /* MSM8996 V3.1 (Final) */ + qcom,board-id = <8 0>; + + chosen { + /* + * Due to an unknown-for-a-few-years regression, + * SDHCI only works on MSM8996 in PIO (lame) mode. + */ + bootargs = "sdhci.debug_quirks=0x40 sdhci.debug_quirks2=0x4 maxcpus=2"; + }; + + reserved-memory { + ramoops@a7f00000 { + compatible = "ramoops"; + reg = <0 0xa7f00000 0 0x100000>; + record-size = <0x20000>; + console-size = <0x40000>; + ftrace-size = <0x20000>; + pmsg-size = <0x20000>; + ecc-size = <16>; + }; + + adsp_mem: adsp@8ea00000 { + reg = <0x0 0x8ea00000 0x0 0x1a00000>; + no-map; + }; + + gpu_mem: gpu@90400000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x90400000 0x0 0x2000>; + no-map; + }; + + slpi_mem: memory@90500000 { + reg = <0 0x90500000 0 0xa00000>; + no-map; + }; + + venus_mem: memory@90f00000 { + reg = <0 0x90f00000 0 0x500000>; + no-map; + }; + }; + + panel_tvdd: tvdd-regulator { + compatible = "regulator-fixed"; + regulator-name = "panel_tvdd"; + gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&tp_vddio_en>; + pinctrl-names = "default"; + }; + + usb3_id: usb3-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&tlmm 25 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_detect>; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + }; + + wlan_en: wlan-en-1-8v { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&tlmm 84 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&wl_reg_on>; + + /* WLAN card specific delay */ + startup-delay-us = <70000>; + enable-active-high; + }; +}; + +&blsp1_i2c3 { + status = "okay"; + clock-frequency = <355000>; + + tof_sensor: vl53l0x@29 { + compatible = "st,vl53l0x"; + reg = <0x29>; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&blsp2_i2c5 { + status = "okay"; + clock-frequency = <355000>; + + /* FUSB301 USB-C controller */ +}; + +&blsp2_i2c6 { + status = "okay"; + clock-frequency = <355000>; + + synaptics@2c { + compatible = "syna,rmi4-i2c"; + reg = <0x2c>; + interrupt-parent = <&tlmm>; + interrupts = <125 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&panel_tvdd>; + + syna,reset-delay-ms = <220>; + syna,startup-delay-ms = <220>; + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f11@11 { + reg = <0x11>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp2_uart2 { + status = "okay"; +}; + +&camera0_mclk { + drive-strength = <2>; + output-low; +}; + +&camera0_pwdn { + drive-strength = <2>; + output-low; +}; + +&camera0_rst { + pins = "gpio30"; + drive-strength = <2>; + output-low; +}; + +&camera2_mclk { + drive-strength = <2>; + output-low; +}; + +&camera2_rst { + drive-strength = <2>; + output-low; +}; + +&hsusb_phy1 { + status = "okay"; + + vdd-supply = <&pm8994_l28>; + vdda-pll-supply = <&pm8994_l12>; + vdda-phy-dpdm-supply = <&pm8994_l24>; +}; + +&mmcc { + vdd-gfx-supply = <&vdd_gfx>; +}; + +&pcie0 { + status = "okay"; + perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; + vddpe-3v3-supply = <&wlan_en>; + vdda-supply = <&pm8994_l28>; +}; + +&pcie_phy { + status = "okay"; + + vdda-phy-supply = <&pm8994_l28>; + vdda-pll-supply = <&pm8994_l12>; +}; + +&pm8994_gpios { + pinctrl-names = "default"; + pinctrl-0 = <&pm8994_gpios_defaults>; + gpio-line-names = + "NC", + "VOL_DOWN_N", + "VOL_UP_N", + "SNAPSHOT_N", + "FOCUS_N", + "NC", + "NFC_VEN", + "NC", + "NC", + "NC", + "NC", + "NC", + "EAR_EN", + "NC", + "PM_DIVCLK1", + "PMI_CLK", + "NC", + "WL_SLEEP_CLK", + "NC", + "PMIC_SPON", + "UIM_BATT_ALARM", + "PMK_SLEEP_CLK"; + + /* + * We don't yet know for sure which GPIOs are of our interest, but what + * we do know is that if a vendor sets the pins to a non-default state, there's + * probably a reason for it, and just to be on the safe side, we follow suit. + */ + pm8994_gpios_defaults: pm8994-gpios-default-state { + pm8994-gpio1-nc-pins { + pins = "gpio1"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + bias-high-impedance; + }; + + vol-down-n-pins { + pins = "gpio2"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + input-enable; + bias-pull-up; + qcom,drive-strength = ; + power-source = ; + }; + + vol-up-n-pins { + pins = "gpio3"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + input-enable; + bias-pull-up; + power-source = ; + }; + + camera-snapshot-n-pins { + pins = "gpio4"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + input-enable; + bias-pull-up; + qcom,drive-strength = ; + power-source = ; + }; + + camera-focus-n-pins { + pins = "gpio5"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + input-enable; + bias-pull-up; + qcom,drive-strength = ; + power-source = ; + }; + + pm8994-gpio6-nc-pins { + pins = "gpio6"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + bias-high-impedance; + power-source = ; + }; + + nfc-download-pins { + pins = "gpio7"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + drive-push-pull; + bias-disable; + qcom,drive-strength = ; + power-source = ; + }; + + pm8994-gpio8-nc-pins { + pins = "gpio8"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + drive-push-pull; + bias-high-impedance; + qcom,drive-strength = ; + power-source = ; + }; + + pm8994-gpio9-nc-pins { + pins = "gpio9"; + function = PMIC_GPIO_FUNC_NORMAL; + output-high; + drive-push-pull; + bias-high-impedance; + qcom,drive-strength = ; + power-source = ; + }; + + nfc-clock-pins { + pins = "gpio10"; + function = PMIC_GPIO_FUNC_NORMAL; + input-enable; + drive-push-pull; + bias-pull-down; + qcom,drive-strength = ; + power-source = ; + }; + + pm8994-gpio11-nc-pins { + pins = "gpio11"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + bias-high-impedance; + power-source = ; + }; + + pm8994-gpio12-nc-pins { + pins = "gpio12"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + bias-high-impedance; + power-source = ; + }; + + ear-enable-pins { + pins = "gpio13"; + function = PMIC_GPIO_FUNC_NORMAL; + output-high; + drive-push-pull; + bias-disable; + qcom,drive-strength = ; + power-source = ; + }; + + pm8994-gpio14-nc-pins { + pins = "gpio14"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + input-enable; + bias-high-impedance; + qcom,drive-strength = ; + power-source = ; + }; + + pm-divclk1-gpio-pins { + pins = "gpio15"; + function = "func1"; + output-high; + drive-push-pull; + bias-high-impedance; + qcom,drive-strength = ; + power-source = ; + }; + + pmi-clk-gpio-pins { + pins = "gpio16"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + }; + + pm8994-gpio17-nc-pins { + pins = "gpio17"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + bias-high-impedance; + power-source = ; + }; + + rome-sleep-pins { + pins = "gpio18"; + function = PMIC_GPIO_FUNC_FUNC2; + output-low; + drive-push-pull; + bias-disable; + qcom,drive-strength = ; + power-source = ; + }; + + pm8994-gpio19-nc-pins { + pins = "gpio19"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + drive-push-pull; + bias-high-impedance; + qcom,drive-strength = ; + power-source = ; + }; + + pm8994-gpio22-nc-pins { + pins = "gpio22"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + bias-high-impedance; + power-source = ; + }; + }; +}; + +&pm8994_mpps { + pinctrl-names = "default"; + pinctrl-0 = <&pm8994_mpps_defaults>; + + gpio-line-names = + "SDC_UIM_VBIAS", + "LCD_ID_ADC", + "VREF_DACX", + "NC", + "FLASH_THERM", + "NC", + "NC", + "RF_ID"; + + pm8994_mpps_defaults: pm8994-mpps-default-state { + lcd-id_adc-mpp-pins { + pins = "mpp2"; + function = "analog"; + input-enable; + qcom,amux-route = ; + }; + + pm-mpp4-nc-pins { + pins = "mpp4"; + function = "digital"; + bias-high-impedance; + power-source = ; + }; + + flash-therm-mpp-pins { + pins = "mpp5"; + function = "analog"; + input-enable; + qcom,amux-route = ; + }; + + mpp6-nc-pins { + pins = "mpp6"; + function = "digital"; + bias-high-impedance; + }; + + rf-id-mpp-pins { + pins = "mpp8"; + function = "analog"; + input-enable; + qcom,amux-route = ; + }; + }; +}; + +&pm8994_resin { + status = "okay"; + linux,code = ; +}; + +&pmi8994_gpios { + pinctrl-names = "default"; + pinctrl-0 = <&pmi8994_gpios_defaults>; + + gpio-line-names = + "VIB_LDO_EN", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "USB_SWITCH_SEL", + "NC"; + + pmi8994_gpios_defaults: pmi8994-gpios-default-state { + vib-ldo-en-gpio-pins { + pins = "gpio1"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + output-low; + bias-disable; + power-source = ; + }; + + pmi-gpio2-nc-pins { + pins = "gpio2"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + input-enable; + bias-high-impedance; + qcom,drive-strength = ; + power-source = ; + }; + + pmi-gpio3-nc-pins { + pins = "gpio3"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + input-enable; + bias-high-impedance; + qcom,drive-strength = ; + power-source = ; + }; + + pmi-gpio4-nc-pins { + pins = "gpio4"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + output-high; + qcom,drive-strength = ; + power-source = ; + }; + + pmi-gpio5-nc-pins { + pins = "gpio5"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + output-high; + qcom,drive-strength = ; + power-source = ; + }; + + pmi-gpio6-nc-pins { + pins = "gpio6"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + output-high; + qcom,drive-strength = ; + power-source = ; + }; + + pmi-gpio7-nc-pins { + pins = "gpio7"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + output-high; + qcom,drive-strength = ; + power-source = ; + }; + + pmi-gpio8-nc-pins { + pins = "gpio8"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + output-high; + qcom,drive-strength = ; + power-source = ; + }; + + usb-switch-sel-pins { + pins = "gpio9"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + }; + + pmi-gpio10-nc-pins { + pins = "gpio10"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + drive-push-pull; + bias-disable; + qcom,drive-strength = ; + power-source = ; + }; + }; +}; + +&pm8994_spmi_regulators { + qcom,saw-reg = <&saw3>; + + pm8994_s9: s9 { + qcom,saw-slave; + }; + + pm8994_s10: s10 { + qcom,saw-slave; + }; + + pm8994_s11: s11 { + qcom,saw-leader; + regulator-name = "vdd_apcc"; + regulator-always-on; + regulator-min-microvolt = <470000>; + regulator-max-microvolt = <1140000>; + }; +}; + +&pmi8994_spmi_regulators { + vdd_gfx: + pmi8994_s2: s2 { + /* Pinned to a high value for now to avoid random crashes. */ + regulator-min-microvolt = <1015000>; + regulator-max-microvolt = <1015000>; + regulator-name = "vdd_gfx"; + regulator-always-on; + }; +}; + +&pmi8994_wled { + status = "okay"; + default-brightness = <512>; + qcom,num-strings = <3>; +}; + +&rpm_requests { + pm8994-regulators { + compatible = "qcom,rpm-pm8994-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_s8-supply = <&vph_pwr>; + vdd_s9-supply = <&vph_pwr>; + vdd_s10-supply = <&vph_pwr>; + vdd_s11-supply = <&vph_pwr>; + vdd_s12-supply = <&vph_pwr>; + vdd_l1-supply = <&pm8994_s3>; + vdd_l2_l26_l28-supply = <&pm8994_s3>; + vdd_l3_l11-supply = <&pm8994_s3>; + vdd_l4_l27_l31-supply = <&pm8994_s3>; + vdd_l5_l7-supply = <&pm8994_s5>; + vdd_l6_l12_l32-supply = <&pm8994_s5>; + vdd_l8_l16_l30-supply = <&vph_pwr>; + vdd_l14_l15-supply = <&pm8994_s5>; + vdd_l20_l21-supply = <&pm8994_s5>; + vdd_l25-supply = <&pm8994_s3>; + vdd_lvs1_2-supply = <&pm8994_s4>; + + pm8994_s3: s3 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + pm8994_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-system-load = <325000>; + regulator-always-on; + }; + + pm8994_s5: s5 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + }; + + pm8994_s7: s7 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + pm8994_l1: l1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + pm8994_l2: l2 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + }; + + pm8994_l3: l3 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + pm8994_l4: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + /* L6 and L7 seem unused. */ + + pm8994_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l11: l11 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + pm8994_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + }; + + pm8994_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <22000>; + regulator-allow-set-load; + }; + + pm8994_l14: l14 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + }; + + pm8994_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8994_l17: l17 { + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2500000>; + }; + + pm8994_l18: l18 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l19: l19 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8994_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <570000>; + regulator-allow-set-load; + }; + + pm8994_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <800000>; + regulator-allow-set-load; + }; + + pm8994_l22: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8994_l23: l23 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8994_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + regulator-allow-set-load; + }; + + pm8994_l25: l25 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-allow-set-load; + }; + + pm8994_l27: l27 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1200000>; + }; + + pm8994_l28: l28 { + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <925000>; + regulator-allow-set-load; + }; + + pm8994_l29: l29 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8994_l30: l30 { }; + + pm8994_l32: l32 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; +}; + +&sdhc1 { + /* eMMC doesn't seem to cooperate even in PIO mode.. */ + status = "disabled"; + + vmmc-supply = <&pm8994_l20>; + vqmmc-supply = <&pm8994_s4>; + mmc-hs400-1_8v; + mmc-hs200-1_8v; +}; + +&sdhc2 { + status = "okay"; + + cd-gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>; + vmmc-supply = <&pm8994_l21>; + vqmmc-supply = <&pm8994_l13>; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>; + pinctrl-0 = <&sw_service_gpio>; + pinctrl-names = "default"; + + disp_reset_n_gpio: disp-reset-n { + pins = "gpio8"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + mdp_vsync_p_gpio: mdp-vsync-p { + pins = "gpio10"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-disable; + }; + + sw_service_gpio: sw-service-gpio { + pins = "gpio16"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + usb_detect: usb-detect { + pins = "gpio25"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-high; + }; + + uim_detect_en: uim-detect-en { + pins = "gpio29"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-high; + }; + + tray_det_pin: tray-det { + pins = "gpio40"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + tp_vddio_en: tp-vddio-en { + pins = "gpio50"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-high; + }; + + lcd_vddio_en: lcd-vddio-en { + pins = "gpio51"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + wl_host_wake: wl-host-wake { + pins = "gpio79"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + input-high; + }; + + wl_reg_on: wl-reg-on { + pins = "gpio84"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + ts_reset_n: ts-rst-n { + pins = "gpio89"; + function = "gpio"; + drive-strength = <2>; + }; + + touch_int_n: touch-int-n { + pins = "gpio125"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + touch_int_sleep: touch-int-sleep { + pins = "gpio125"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; +}; + +&usb3 { + status = "okay"; + qcom,select-utmi-as-pipe-clk; +}; + +&usb3_dwc3 { + extcon = <&usb3_id>; + dr_mode = "peripheral"; + maximum-speed = "high-speed"; + phys = <&hsusb_phy1>; + phy-names = "usb2-phy"; + snps,hird-threshold = /bits/ 8 <0>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8996-v3.0.dtsi b/arch/arm64/boot/dts/qcom/msm8996-v3.0.dtsi new file mode 100644 index 000000000..5728583af --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8996-v3.0.dtsi @@ -0,0 +1,63 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio + */ + +#include "msm8996.dtsi" + +/ { + qcom,msm-id = <246 0x30000>; +}; + + /* + * This revision seems to have differ GPU CPR + * parameters, GPU frequencies and some differences + * when it comes to voltage delivery to.. once again + * the GPU. Funnily enough, it's simpler to make it an + * overlay on top of 3.1 (the final one) than vice versa. + * The differences will show here as more and more + * features get enabled upstream. + */ + +gpu_opp_table_3_0: gpu-opp-table-30 { + compatible = "operating-points-v2"; + + opp-624000000 { + opp-hz = /bits/ 64 <624000000>; + opp-level = <7>; + }; + + opp-560000000 { + opp-hz = /bits/ 64 <560000000>; + opp-level = <6>; + }; + + opp-510000000 { + opp-hz = /bits/ 64 <510000000>; + opp-level = <5>; + }; + + opp-401800000 { + opp-hz = /bits/ 64 <401800000>; + opp-level = <4>; + }; + + opp-315000000 { + opp-hz = /bits/ 64 <315000000>; + opp-level = <3>; + }; + + opp-214000000 { + opp-hz = /bits/ 64 <214000000>; + opp-level = <3>; + }; + + opp-133000000 { + opp-hz = /bits/ 64 <133000000>; + opp-level = <3>; + }; +}; + +&gpu { + operating-points-v2 = <&gpu_opp_table_3_0>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi new file mode 100644 index 000000000..778191860 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi @@ -0,0 +1,731 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Yassine Oudjana + */ + +/dts-v1/; + +#include "msm8996.dtsi" +#include "pm8994.dtsi" +#include "pmi8994.dtsi" +#include +#include +#include +#include + +/ { + clocks { + compatible = "simple-bus"; + + divclk1_cdc: divclk1 { + compatible = "gpio-gate-clock"; + clocks = <&rpmcc RPM_SMD_DIV_CLK1>; + #clock-cells = <0>; + enable-gpios = <&pm8994_gpios 15 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&divclk1_default>; + }; + + divclk4: divclk4 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "divclk4"; + + pinctrl-names = "default"; + pinctrl-0 = <&divclk4_pin_a>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-vol-up { + label = "Volume Up"; + gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>; + linux,code = ; + wakeup-source; + debounce-interval = <15>; + }; + + key-dome { + label = "Home"; + gpios = <&tlmm 34 GPIO_ACTIVE_LOW>; + linux,code = ; + wakeup-source; + debounce-interval = <15>; + }; + }; + + irled { + compatible = "pwm-ir-tx"; + pwms = <&pm8994_lpg 1 1000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&irled_default>; + }; + + reserved-memory { + memory@88800000 { + reg = <0x0 0x88800000 0x0 0x1400000>; + no-map; + }; + + /* This platform has all PIL regions offset by 0x1400000 */ + /delete-node/ mpss@88800000; + mpss_mem: mpss@89c00000 { + reg = <0x0 0x89c00000 0x0 0x6200000>; + no-map; + }; + + /delete-node/ adsp@8ea00000; + adsp_mem: adsp@8fe00000 { + reg = <0x0 0x8fe00000 0x0 0x1b00000>; + no-map; + }; + + /delete-node/ slpi@90500000; + slpi_mem: slpi@91900000 { + reg = <0x0 0x91900000 0x0 0xa00000>; + no-map; + }; + + /delete-node/ gpu@90f00000; + gpu_mem: gpu@92300000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x92300000 0x0 0x2000>; + no-map; + }; + + /delete-node/ venus@91000000; + venus_mem: venus@92400000 { + reg = <0x0 0x92400000 0x0 0x500000>; + no-map; + }; + + ramoops@92900000 { + compatible = "ramoops"; + reg = <0x0 0x92900000 0x0 0x100000>; + no-map; + + record-size = <0x8000>; + console-size = <0x80000>; + ftrace-size = <0x20000>; + pmsg-size = <0x40000>; + }; + + /delete-node/ rmtfs; + rmtfs@f6c00000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0xf6c00000 0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + + /delete-node/ mba@91500000; + mba_mem: mba@f6f00000 { + reg = <0x0 0xf6f00000 0x0 0x100000>; + no-map; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3800000>; + regulator-max-microvolt = <3800000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_3v2_tp: vdd-3v2-tp { + compatible = "regulator-fixed"; + regulator-name = "vdd_3v2_tp"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + startup-delay-us = <4000>; + vin-supply = <&vph_pwr>; + + gpio = <&tlmm 73 0>; + enable-active-high; + }; + + vdd_3v3: rome-vreg { + compatible = "regulator-fixed"; + regulator-name = "vdd_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <4000>; + vin-supply = <&vph_pwr_bbyp>; + + gpio = <&pm8994_gpios 9 0>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&rome_enable_default>; + + /* Required by QCA6174a - vddpe-3v3 */ + regulator-always-on; + }; + + /* WL_EN pin defined as a fixed regulator */ + wlan_en: wlan-en-1-8v { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&pm8994_gpios 8 0>; + /* WLAN card specific delay */ + startup-delay-us = <70000>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_en_default>; + }; +}; + +&adsp_pil { + status = "okay"; +}; + +&blsp2_i2c2 { + status = "okay"; + label = "NFC_I2C"; + clock-frequency = <400000>; + + nfc: pn548@28 { + compatible = "nxp,nxp-nci-i2c"; + + reg = <0x28>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; + + enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; + firmware-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&nfc_default>; + }; +}; + +&blsp2_i2c3 { + status = "okay"; + label = "TYPEC_I2C"; + + typec: tusb320l@47 { + compatible = "ti,tusb320l"; + reg = <0x47>; + interrupt-parent = <&tlmm>; + interrupts = <63 IRQ_TYPE_EDGE_RISING>; + }; +}; + +&blsp2_i2c6 { + status = "okay"; + label = "MSM_TS_I2C"; +}; + +&blsp1_uart2 { + status = "okay"; + label = "QCA_UART"; + + bluetooth: qca6174a { + compatible = "qcom,qca6174-bt"; + + enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; + clocks = <&divclk4>; + }; +}; + +&dsi0 { + status = "okay"; + + vdd-supply = <&vreg_l2a_1p25>; + vddio-supply = <&vreg_l14a_1p8>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mdss_dsi_default &mdss_te_default>; + pinctrl-1 = <&mdss_dsi_sleep &mdss_te_sleep>; +}; + +&dsi0_out { + status = "okay"; + + data-lanes = <0 1 2 3>; +}; + +&dsi0_phy { + status = "okay"; + + vcca-supply = <&vreg_l28a_0p925>; +}; + +&gpu { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mmcc { + vdd-gfx-supply = <&vdd_gfx>; +}; + +&mss_pil { + status = "okay"; + + pll-supply = <&vreg_l12a_1p8>; +}; + +&pcie0 { + status = "okay"; + + /* Supplied by vdd_3v3, but choose wlan_en to drive enable pin high */ + vddpe-3v3-supply = <&wlan_en>; + vdda-supply = <&vreg_l28a_0p925>; + + perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; +}; + +&pcie_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; +}; + +&pm8994_resin { + status = "okay"; + + linux,code = ; +}; + +&pm8994_lpg { + status = "okay"; + + qcom,power-source = <1>; +}; + +&pmi8994_lpg { + status = "okay"; + + qcom,power-source = <1>; + + multi-led { + color = ; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + color = ; + }; + + led@2 { + reg = <2>; + color = ; + }; + + led@3 { + reg = <3>; + color = ; + }; + }; +}; + +&slpi_pil { + status = "okay"; + + px-supply = <&vreg_lvs2a_1p8>; +}; + +&usb3 { + status = "okay"; + extcon = <&typec>; + + qcom,select-utmi-as-pipe-clk; +}; + +&usb3_dwc3 { + extcon = <&typec>; + + /* usb3-phy is not used on this device */ + phys = <&hsusb_phy1>; + phy-names = "usb2-phy"; + + maximum-speed = "high-speed"; + snps,is-utmi-l1-suspend; + snps,usb2-gadget-lpm-disable; + snps,hird-threshold = /bits/ 8 <0>; +}; + +&hsusb_phy1 { + status = "okay"; + extcon = <&typec>; + + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; +}; + +&ufshc { + status = "okay"; + + vcc-supply = <&vreg_l20a_2p95>; + vccq-supply = <&vreg_l25a_1p2>; + vccq2-supply = <&vreg_s4a_1p8>; + + vcc-max-microamp = <600000>; + vccq-max-microamp = <450000>; + vccq2-max-microamp = <450000>; +}; + +&ufsphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; + vddp-ref-clk-supply = <&vreg_l25a_1p2>; +}; + +&venus { + status = "okay"; +}; + +&wcd9335 { + clock-names = "mclk", "slimbus"; + clocks = <&divclk1_cdc>, + <&rpmcc RPM_SMD_BB_CLK1>; + + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-buck-sido-supply = <&vreg_s4a_1p8>; + vdd-rx-supply = <&vreg_s4a_1p8>; + vdd-tx-supply = <&vreg_s4a_1p8>; + vdd-vbat-supply = <&vph_pwr>; + vdd-micbias-supply = <&vph_pwr_bbyp>; + vdd-io-supply = <&vreg_s4a_1p8>; +}; + +&rpm_requests { + pm8994-regulators { + compatible = "qcom,rpm-pm8994-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_s8-supply = <&vph_pwr>; + vdd_s9-supply = <&vph_pwr>; + vdd_s10-supply = <&vph_pwr>; + vdd_s11-supply = <&vph_pwr>; + vdd_s12-supply = <&vph_pwr>; + vdd_l1-supply = <&vreg_s1b_1p025>; + vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>; + vdd_l3_l11-supply = <&vreg_s3a_1p3>; + vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>; + vdd_l5_l7-supply = <&vreg_s5a_2p15>; + vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>; + vdd_l8_l16_l30-supply = <&vph_pwr>; + vdd_l9_l10_l18_l22-supply = <&vph_pwr_bbyp>; + vdd_l13_l19_l23_l24-supply = <&vph_pwr_bbyp>; + vdd_l14_l15-supply = <&vreg_s5a_2p15>; + vdd_l17_l29-supply = <&vph_pwr_bbyp>; + vdd_l20_l21-supply = <&vph_pwr_bbyp>; + vdd_l25-supply = <&vreg_s3a_1p3>; + vdd_lvs1_2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p3: s3 { + regulator-name = "vreg_s3a_1p3"; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + + /* Required by QCA6174a - vdd-core */ + regulator-always-on; + }; + vreg_s4a_1p8: s4 { + regulator-name = "vreg_s4a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + + /* Required by QCA6174a - vddio */ + regulator-always-on; + }; + vreg_s5a_2p15: s5 { + regulator-name = "vreg_s5a_2p15"; + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + }; + vreg_s7a_0p8: s7 { + regulator-name = "vreg_s7a_0p8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + vreg_l1a_1p0: l1 { + regulator-name = "vreg_l1a_1p0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l2a_1p25: l2 { + regulator-name = "vreg_l2a_1p25"; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + }; + vreg_l4a_1p225: l4 { + regulator-name = "vreg_l4a_1p225"; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + vreg_l6a_1p8: l6 { + regulator-name = "vreg_l6a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l8a_1p8: l8 { + regulator-name = "vreg_l8a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l9a_1p8: l9 { + regulator-name = "vreg_l9a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l10a_1p8: l10 { + regulator-name = "vreg_l10a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l12a_1p8: l12 { + regulator-name = "vreg_l12a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + }; + vreg_l13a_2p95: l13 { + regulator-name = "vreg_l13a_2p95"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + vreg_l14a_1p8: l14 { + regulator-name = "vreg_l14a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l15a_1p8: l15 { + regulator-name = "vreg_l15a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l16a_2p7: l16 { + regulator-name = "vreg_l16a_2p7"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + vreg_l19a_3p3: l19 { + regulator-name = "vreg_l19a_3p3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + vreg_l20a_2p95: l20 { + regulator-name = "vreg_l20a_2p95"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + vreg_l21a_2p95: l21 { + regulator-name = "vreg_l21a_2p95"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + vreg_l23a_2p8: l23 { + regulator-name = "vreg_l23a_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + vreg_l24a_3p075: l24 { + regulator-name = "vreg_l24a_3p075"; + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + vreg_l25a_1p2: l25 { + regulator-name = "vreg_l25a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-allow-set-load; + }; + vreg_l27a_1p2: l27 { + regulator-name = "vreg_l27a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + vreg_l28a_0p925: l28 { + regulator-name = "vreg_l28a_0p925"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <925000>; + regulator-allow-set-load; + }; + vreg_l30a_1p8: l30 { + regulator-name = "vreg_l30a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + /* Required by QCA6174a - vddio-xtal */ + regulator-always-on; + }; + vreg_l32a_1p8: l32 { + regulator-name = "vreg_l32a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_lvs1a_1p8: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_lvs2a_1p8: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + + pmi8994-regulators { + compatible = "qcom,rpm-pmi8994-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_bst_byp-supply = <&vph_pwr>; + + vreg_s1b_1p025: s1 { + regulator-name = "vreg_s1b_1p025"; + regulator-min-microvolt = <1025000>; + regulator-max-microvolt = <1025000>; + }; + + vph_pwr_bbyp: boost-bypass { + regulator-name = "vph_pwr_bbyp"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3600000>; + }; + }; +}; + +&pm8994_spmi_regulators { + qcom,saw-reg = <&saw3>; + s8 { + qcom,saw-slave; + }; + s9 { + qcom,saw-slave; + }; + s10 { + qcom,saw-slave; + }; + vreg_apc_0p8: s11 { + qcom,saw-leader; + regulator-name = "vreg_apc_0p8"; + regulator-min-microvolt = <470000>; + regulator-max-microvolt = <1140000>; + regulator-max-step-microvolt = <150000>; + regulator-always-on; + }; +}; + +&pmi8994_spmi_regulators { + vdd_gfx: s2 { + regulator-name = "vdd_gfx"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1015000>; + regulator-enable-ramp-delay = <500>; + }; +}; + +&pm8994_gpios { + irled_default: irled-default-state { + pins = "gpio5"; + function = PMIC_GPIO_FUNC_FUNC1; + output-low; + qcom,drive-strength = ; + power-source = ; + bias-disable; + }; + + wlan_en_default: wlan-en-state { + pins = "gpio8"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + qcom,drive-strength = ; + power-source = ; + bias-disable; + }; + + rome_enable_default: rome-enable-state { + pins = "gpio9"; + function = PMIC_GPIO_FUNC_NORMAL; + output-high; + qcom,drive-strength = ; + power-source = ; + }; + + divclk1_default: divclk1-state { + pins = "gpio15"; + function = PMIC_GPIO_FUNC_FUNC1; + bias-disable; + power-source = ; + qcom,drive-strength = ; + }; + + divclk4_pin_a: divclk4-state { + pins = "gpio18"; + function = PMIC_GPIO_FUNC_FUNC2; + bias-disable; + power-source = ; + }; +}; + +&tlmm { + mdss_dsi_default: mdss_dsi_default { + pins = "gpio8"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + mdss_dsi_sleep: mdss_dsi_sleep { + pins = "gpio8"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + mdss_te_default: mdss_te_default { + pins = "gpio10"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + mdss_te_sleep: mdss_te_sleep { + pins = "gpio10"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + nfc_default: nfc_default { + pins = "gpio12", "gpio21"; + function = "gpio"; + drive-strength = <16>; + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts new file mode 100644 index 000000000..3bbafb68b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts @@ -0,0 +1,475 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Raffaele Tranquillini + */ + +/dts-v1/; + +#include "msm8996-xiaomi-common.dtsi" +#include +#include +#include +#include + +/ { + model = "Xiaomi Mi 5"; + compatible = "xiaomi,gemini", "qcom,msm8996"; + chassis-type = "handset"; + qcom,msm-id = <246 0x30001>; + qcom,pmic-id = <0x20009 0x2000a 0x00 0x00>; + qcom,board-id = <31 0>; + + clocks { + divclk2_haptics: divclk2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "divclk2"; + + pinctrl-names = "default"; + pinctrl-0 = <&divclk2_pin_a>; + }; + }; +}; + +&adsp_pil { + firmware-name = "qcom/msm8996/gemini/adsp.mbn"; +}; + +&blsp2_i2c3 { + haptics: drv2604@5a { + compatible = "ti,drv2604"; + reg = <0x5a>; + enable-gpio = <&tlmm 93 0x00>; + mode = ; + library-sel = ; + pinctrl-names = "default","sleep"; + pinctrl-0 = <&vibrator_default>; + pinctrl-1 = <&vibrator_sleep>; + }; + + lp5562@30 { + compatible = "ti,lp5562"; + reg = <0x30>; + #address-cells = <1>; + #size-cells = <0>; + enable-gpio = <&pm8994_gpios 7 1>; + clock-mode = /bits/8 <2>; + label = "button-backlight"; + + led@0 { + reg = <0>; + chan-name = "button-backlight"; + led-cur = /bits/ 8 <0x32>; + max-cur = /bits/ 8 <0xC8>; + }; + + led@1 { + reg = <0>; + chan-name = "button-backlight1"; + led-cur = /bits/ 8 <0x32>; + max-cur = /bits/ 8 <0xC8>; + }; + }; +}; + +&blsp2_i2c6 { + synaptics@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&tlmm>; + interrupts = <125 IRQ_TYPE_LEVEL_LOW>; + vio-supply = <&vreg_l6a_1p8>; + vdd-supply = <&vdd_3v2_tp>; + reset-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&touchscreen_default>; + pinctrl-1 = <&touchscreen_sleep>; + }; + +}; + +&dsi0 { + status = "okay"; + + vdd-supply = <&vreg_l2a_1p25>; + vdda-supply = <&vreg_l19a_3p3>; + vddio-supply = <&vreg_l14a_1p8>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mdss_dsi_default &mdss_te_default>; + pinctrl-1 = <&mdss_dsi_sleep &mdss_te_sleep>; + + panel: panel@0 { + compatible = "jdi,fhd-r63452"; + reg = <0>; + reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; + backlight = <&pmi8994_wled>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; +}; + +&dsi0_out { + remote-endpoint = <&panel_in>; +}; + +&gpu { + zap-shader { + firmware-name = "qcom/msm8996/gemini/a530_zap.mbn"; + }; +}; + +&pmi8994_wled { + status = "okay"; +}; + +&mss_pil { + firmware-name = "qcom/msm8996/gemini/mba.mbn", + "qcom/msm8996/gemini/modem.mbn"; +}; + +&q6asmdai { + dai@0 { + reg = <0>; + }; + + dai@1 { + reg = <1>; + }; + + dai@2 { + reg = <2>; + }; +}; + +&slpi_pil { + firmware-name = "qcom/msm8996/gemini/slpi.mbn"; +}; + +&sound { + compatible = "qcom,apq8096-sndcard"; + model = "gemini"; + audio-routing = "RX_BIAS", "MCLK", + "MM_DL1", "MultiMedia1 Playback", + "MM_DL2", "MultiMedia2 Playback", + "MultiMedia3 Capture", "MM_UL3"; + + mm1-dai-link { + link-name = "MultiMedia1"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + mm2-dai-link { + link-name = "MultiMedia2"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + mm3-dai-link { + link-name = "MultiMedia3"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + slim-dai-link { + link-name = "SLIM Playback"; + cpu { + sound-dai = <&q6afedai SLIMBUS_6_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9335 AIF4_PB>; + }; + }; + + slimcap-dai-link { + link-name = "SLIM Capture"; + cpu { + sound-dai = <&q6afedai SLIMBUS_0_TX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9335 AIF1_CAP>; + }; + }; +}; + +&venus { + firmware-name = "qcom/msm8996/gemini/venus.mbn"; +}; + +&rpm_requests { + pm8994-regulators { + vreg_l17a_2p8: l17 { + regulator-name = "vreg_l17a_2p8"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + vreg_l29a_2p7: l29 { + regulator-name = "vreg_l29a_2p7"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + }; +}; + +&pm8994_gpios { + gpio-line-names = + "NC", /* GPIO_1 */ + "VOL_UP_N", /* GPIO_2 */ + "SPKR_ID", /* GPIO_3 */ + "PWM_HAPTICS", /* GPIO_4 */ + "INFARED_DRV", /* GPIO_5 */ + "NC", /* GPIO_6 */ + "KEYPAD_LED_EN", /* GPIO_7 */ + "WL_EN", /* GPIO_8 */ + "3P3_ENABLE", /* GPIO_9 */ + "FP_ID", /* GPIO_10 */ + "NC", /* GPIO_11 */ + "NC", /* GPIO_12 */ + "NC", /* GPIO_13 */ + "NC", /* GPIO_14 */ + "DIVCLK1_CDC", /* GPIO_15 */ + "DIVCLK2_HAPTICS", /* GPIO_16 */ + "NC", /* GPIO_17 */ + "32KHz_CLK_IN", /* GPIO_18 */ + "BT_EN", /* GPIO_19 */ + "PMIC_SLB", /* GPIO_20 */ + "UIM_BATT_ALARM", /* GPIO_21 */ + "NC"; /* GPIO_22 */ + + divclk2_pin_a: divclk2-state { + pins = "gpio16"; + function = PMIC_GPIO_FUNC_FUNC2; + bias-disable; + power-source = ; + }; +}; + +&pm8994_mpps { + gpio-line-names = + "NC", /* MPP_1 */ + "CCI_TIMER1", /* MPP_2 */ + "PMIC_SLB", /* MPP_3 */ + "EXT_FET_WLED_PWR_EN_N",/* MPP_4 */ + "NC", /* MPP_5 */ + "NC", /* MPP_6 */ + "NC", /* MPP_7 */ + "NC"; /* MPP_8 */ +}; + +&pmi8994_gpios { + gpio-line-names = + "NC", /* GPIO_1 */ + "SPKR_PA_RST", /* GPIO_2 */ + "NC", /* GPIO_3 */ + "NC", /* GPIO_4 */ + "NC", /* GPIO_5 */ + "NC", /* GPIO_6 */ + "NC", /* GPIO_7 */ + "NC", /* GPIO_8 */ + "NC", /* GPIO_9 */ + "NC"; /* GPIO_10 */ +}; + +&tlmm { + gpio-line-names = + "ESE_SPI_MOSI", /* GPIO_0 */ + "ESE_SPI_MISO", /* GPIO_1 */ + "ERR_INT_N", /* GPIO_2 */ + "ESE_SPI_CLK", /* GPIO_3 */ + "MSM_UART_TX", /* GPIO_4 */ + "MSM_UART_RX", /* GPIO_5 */ + "NFC_I2C_SDA", /* GPIO_6 */ + "NFC_I2C_SCL", /* GPIO_7 */ + "LCD0_RESET_N", /* GPIO_8 */ + "NFC_IRQ", /* GPIO_9 */ + "LCD_TE", /* GPIO_10 */ + "LCD_ID_DET1", /* GPIO_11 */ + "NFC_DISABLE", /* GPIO_12 */ + "CAM_MCLK0", /* GPIO_13 */ + "NC", /* GPIO_14 */ + "CAM_MCLK2", /* GPIO_15 */ + "ESE_PWR_REQ", /* GPIO_16 */ + "CCI_I2C_SDA0", /* GPIO_17 */ + "CCI_I2C_SCL0", /* GPIO_18 */ + "CCI_I2C_SDA1", /* GPIO_19 */ + "CCI_I2C_SCL1", /* GPIO_20 */ + "NFC_DWL_REQ", /* GPIO_21 */ + "CCI_TIMER1", /* GPIO_22 */ + "WEBCAM1_RESET_N", /* GPIO_23 */ + "ESE_IRQ", /* GPIO_24 */ + "NC", /* GPIO_25 */ + "WEBCAM1_STANDBY", /* GPIO_26 */ + "NC", /* GPIO_27 */ + "NC", /* GPIO_28 */ + "NC", /* GPIO_29 */ + "CAM1_RST_N", /* GPIO_30 */ + "NC", /* GPIO_31 */ + "NC", /* GPIO_32 */ + "NC", /* GPIO_33 */ + "FP_DOME_SW", /* GPIO_34 */ + "PCI_E0_RST_N", /* GPIO_35 */ + "PCI_E0_CLKREQ_N", /* GPIO_36 */ + "PCI_E0_WAKE", /* GPIO_37 */ + "FM_INT_N", /* GPIO_38 */ + "FM_RESET_N", /* GPIO_39 */ + "NC", /* GPIO_40 */ + "QCA_UART_TXD", /* GPIO_41 */ + "QCA_UART_RXD", /* GPIO_42 */ + "QCA_UART_CTS", /* GPIO_43 */ + "QCA_UART_RTS", /* GPIO_44 */ + "MAWC_UART_TX", /* GPIO_45 */ + "MAWC_UART_RX", /* GPIO_46 */ + "NC", /* GPIO_47 */ + "NC", /* GPIO_48 */ + "AUDIO_SWITCH_EN", /* GPIO_49 */ + "FP_SPI_RST", /* GPIO_50 */ + "TYPEC_I2C_SDA", /* GPIO_51 */ + "TYPEC_I2C_SCL", /* GPIO_52 */ + "CODEC_INT2_N", /* GPIO_53 */ + "CODEC_INT1_N", /* GPIO_54 */ + "APPS_I2C7_SDA", /* GPIO_55 */ + "APPS_I2C7_SCL", /* GPIO_56 */ + "FORCE_USB_BOOT", /* GPIO_57 */ + "SPKR_I2S_BCK", /* GPIO_58 */ + "SPKR_I2S_WS", /* GPIO_59 */ + "SPKR_I2S_DOUT", /* GPIO_60 */ + "SPKR_I2S_DIN", /* GPIO_61 */ + "ESE_RSTN", /* GPIO_62 */ + "TYPEC_INT", /* GPIO_63 */ + "CODEC_RESET_N", /* GPIO_64 */ + "PCM_CLK", /* GPIO_65 */ + "PCM_SYNC", /* GPIO_66 */ + "PCM_DIN", /* GPIO_67 */ + "PCM_DOUT", /* GPIO_68 */ + "HIFI_CLK", /* GPIO_69 */ + "SLIMBUS_CLK", /* GPIO_70 */ + "SLIMBUS_DATA0", /* GPIO_71 */ + "SLIMBUS_DATA1", /* GPIO_72 */ + "LDO_5V_IN_EN", /* GPIO_73 */ + "NC", /* GPIO_74 */ + "FM_I2S_CLK", /* GPIO_75 */ + "FM_I2S_SYNC", /* GPIO_76 */ + "FM_I2S_DATA", /* GPIO_77 */ + "FM_STATUS", /* GPIO_78 */ + "NC", /* GPIO_79 */ + "SENSOR_RESET_N", /* GPIO_80 */ + "FP_SPI_MOSI", /* GPIO_81 */ + "FP_SPI_MISO", /* GPIO_82 */ + "FP_SPI_CS_N", /* GPIO_83 */ + "FP_SPI_CLK", /* GPIO_84 */ + "NC", /* GPIO_85 */ + "CAM_VDD_1P05_EN", /* GPIO_86 */ + "MSM_TS_I2C_SDA", /* GPIO_87 */ + "MSM_TS_I2C_SCL", /* GPIO_88 */ + "TS_RESOUT_N", /* GPIO_89 */ + "ESE_SPI_CS_N", /* GPIO_90 */ + "NC", /* GPIO_91 */ + "NC", /* GPIO_92 */ + "HAPTICS_EN", /* GPIO_93 */ + "NC", /* GPIO_94 */ + "NC", /* GPIO_95 */ + "NC", /* GPIO_96 */ + "NC", /* GPIO_97 */ + "GRFC_1", /* GPIO_98 */ + "NC", /* GPIO_99 */ + "GRFC_3", /* GPIO_100 */ + "GRFC_4", /* GPIO_101 */ + "NC", /* GPIO_102 */ + "NC", /* GPIO_103 */ + "GRFC_7", /* GPIO_104 */ + "UIM2_DATA", /* GPIO_105 */ + "UIM2_CLK", /* GPIO_106 */ + "UIM2_RESET", /* GPIO_107 */ + "UIM2_PRESENT", /* GPIO_108 */ + "UIM1_DATA", /* GPIO_109 */ + "UIM1_CLK", /* GPIO_110 */ + "UIM1_RESET", /* GPIO_111 */ + "UIM1_PRESENT", /* GPIO_112 */ + "UIM_BATT_ALARM", /* GPIO_113 */ + "GRFC_8", /* GPIO_114 */ + "GRFC_9", /* GPIO_115 */ + "TX_GTR_THRES", /* GPIO_116 */ + "ACCEL_INT", /* GPIO_117 */ + "GYRO_INT", /* GPIO_118 */ + "COMPASS_INT", /* GPIO_119 */ + "PROXIMITY_INT_N", /* GPIO_120 */ + "FP_IRQ", /* GPIO_121 */ + "NC", /* GPIO_122 */ + "HALL_INTR2", /* GPIO_123 */ + "HALL_INTR1", /* GPIO_124 */ + "TS_INT_N", /* GPIO_125 */ + "NC", /* GPIO_126 */ + "GRFC_11", /* GPIO_127 */ + "NC", /* GPIO_128 */ + "EXT_GPS_LNA_EN", /* GPIO_129 */ + "NC", /* GPIO_130 */ + "NC", /* GPIO_131 */ + "NC", /* GPIO_132 */ + "GRFC_14", /* GPIO_133 */ + "GSM_TX2_PHASE_D", /* GPIO_134 */ + "NC", /* GPIO_135 */ + "NC", /* GPIO_136 */ + "RFFE3_DATA", /* GPIO_137 */ + "RFFE3_CLK", /* GPIO_138 */ + "NC", /* GPIO_139 */ + "NC", /* GPIO_140 */ + "RFFE5_DATA", /* GPIO_141 */ + "RFFE5_CLK", /* GPIO_142 */ + "NC", /* GPIO_143 */ + "COEX_UART_TX", /* GPIO_144 */ + "COEX_UART_RX", /* GPIO_145 */ + "RFFE2_DATA", /* GPIO_146 */ + "RFFE2_CLK", /* GPIO_147 */ + "RFFE1_DATA", /* GPIO_148 */ + "RFFE1_CLK"; /* GPIO_149 */ + + touchscreen_default: touchscreen_default { + pins = "gpio89", "gpio125"; + function = "gpio"; + drive-strength = <10>; + bias-pull-up; + }; + + touchscreen_sleep: touchscreen_sleep { + pins = "gpio89", "gpio125"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + vibrator_default: vibrator_default { + pins = "gpio93"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + vibrator_sleep: vibrator_sleep { + pins = "gpio93"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-natrium.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-natrium.dts new file mode 100644 index 000000000..ff4673ee9 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-natrium.dts @@ -0,0 +1,414 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Alec Su + */ + +/dts-v1/; + +#include "msm8996-xiaomi-common.dtsi" +#include "pmi8996.dtsi" +#include +#include + +/ { + model = "Xiaomi Mi 5s Plus"; + compatible = "xiaomi,natrium", "qcom,msm8996"; + chassis-type = "handset"; + qcom,msm-id = <305 0x10000>; + qcom,board-id = <47 0>; +}; + +&adsp_pil { + firmware-name = "qcom/msm8996/natrium/adsp.mbn"; +}; + +&blsp2_i2c6 { + touchscreen@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + interrupt-parent = <&tlmm>; + interrupts = <125 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vdd_3v2_tp>; + syna,reset-delay-ms = <200>; + syna,startup-delay-ms = <5>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&touchscreen_default>; + pinctrl-1 = <&touchscreen_sleep>; + }; +}; + +&dsi0 { + status = "okay"; + + vdda-supply = <&vreg_l2a_1p25>; + vcca-supply = <&vreg_l28a_0p925>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mdss_dsi_default &mdss_te_default>; + pinctrl-1 = <&mdss_dsi_sleep &mdss_te_sleep>; + + panel: panel@0 { + compatible = "jdi,fhd-r63452"; + reg = <0>; + reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; + backlight = <&pmi8994_wled>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; +}; + +&dsi0_out { + remote-endpoint = <&panel_in>; +}; + +&gpu { + zap-shader { + firmware-name = "qcom/msm8996/natrium/a530_zap.mbn"; + }; +}; + +&mss_pil { + firmware-name = "qcom/msm8996/natrium/mba.mbn", + "qcom/msm8996/natrium/modem.mbn"; +}; + +&pmi8994_wled { + status = "okay"; + + qcom,enabled-strings = <0 1>; + qcom,switching-freq = <600>; +}; + +&q6asmdai { + dai@0 { + reg = <0>; + }; + + dai@1 { + reg = <1>; + }; + + dai@2 { + reg = <2>; + }; +}; + +&slpi_pil { + firmware-name = "qcom/msm8996/natrium/slpi.mbn"; +}; + +&sound { + compatible = "qcom,apq8096-sndcard"; + model = "natrium"; + audio-routing = "RX_BIAS", "MCLK"; + + mm1-dai-link { + link-name = "MultiMedia1"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + mm2-dai-link { + link-name = "MultiMedia2"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + mm3-dai-link { + link-name = "MultiMedia3"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + slim-dai-link { + link-name = "SLIM Playback"; + cpu { + sound-dai = <&q6afedai SLIMBUS_6_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9335 6>; + }; + }; + + slimcap-dai-link { + link-name = "SLIM Capture"; + cpu { + sound-dai = <&q6afedai SLIMBUS_0_TX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9335 1>; + }; + }; +}; + +&venus { + firmware-name = "qcom/msm8996/natrium/venus.mbn"; +}; + +&rpm_requests { + pm8994-regulators { + vreg_l3a_0p875: l3 { + regulator-name = "vreg_l3a_0p875"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1300000>; + }; + vreg_l11a_1p1: l11 { + regulator-name = "vreg_l11a_1p1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + vreg_l17a_2p8: l17 { + regulator-name = "vreg_l17a_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + vreg_l18a_2p8: l18 { + regulator-name = "vreg_l18a_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + vreg_l29a_2p8: l29 { + regulator-name = "vreg_l29a_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + }; +}; + +&pm8994_gpios { + gpio-line-names = + "NC", /* GPIO_1 */ + "VOL_UP_N", /* GPIO_2 */ + "SPKR_ID", /* GPIO_3 */ + "PWM_HAPTICS", /* GPIO_4 */ + "INFARED_DRV", /* GPIO_5 */ + "NC", /* GPIO_6 */ + "KEYPAD_LED_EN_A", /* GPIO_7 */ + "WL_EN", /* GPIO_8 */ + "3P3_ENABLE", /* GPIO_9 */ + "NC", /* GPIO_10 */ + "NC", /* GPIO_11 */ + "NC", /* GPIO_12 */ + "NC", /* GPIO_13 */ + "NC", /* GPIO_14 */ + "DIVCLK1_CDC", /* GPIO_15 */ + "DIVCLK2_HAPTICS", /* GPIO_16 */ + "NC", /* GPIO_17 */ + "32KHz_CLK_IN", /* GPIO_18 */ + "BT_EN", /* GPIO_19 */ + "PMIC_SLB", /* GPIO_20 */ + "UIM_BATT_ALARM", /* GPIO_21 */ + "NC"; /* GPIO_22 */ +}; + +&pm8994_mpps { + gpio-line-names = + "NC", /* MPP_1 */ + "CCI_TIMER1", /* MPP_2 */ + "PMIC_SLB", /* MPP_3 */ + "EXT_FET_WLED_PWR_EN_N",/* MPP_4 */ + "NC", /* MPP_5 */ + "NC", /* MPP_6 */ + "NC", /* MPP_7 */ + "NC"; /* MPP_8 */ +}; + +&pmi8994_gpios { + gpio-line-names = + "NC", /* GPIO_1 */ + "SPKR_PA_EN", /* GPIO_2 */ + "NC", /* GPIO_3 */ + "NC", /* GPIO_4 */ + "NC", /* GPIO_5 */ + "NC", /* GPIO_6 */ + "NC", /* GPIO_7 */ + "NC", /* GPIO_8 */ + "NC", /* GPIO_9 */ + "NC"; /* GPIO_10 */ +}; + +&tlmm { + gpio-line-names = + "ESE_SPI_MOSI", /* GPIO_0 */ + "ESE_SPI_MISO", /* GPIO_1 */ + "NC", /* GPIO_2 */ + "ESE_SPI_CLK", /* GPIO_3 */ + "MSM_UART_TX", /* GPIO_4 */ + "MSM_UART_RX", /* GPIO_5 */ + "NFC_I2C_SDA", /* GPIO_6 */ + "NFC_I2C_SCL", /* GPIO_7 */ + "LCD0_RESET_N", /* GPIO_8 */ + "NFC_IRQ", /* GPIO_9 */ + "LCD_TE", /* GPIO_10 */ + "LCD_ID_DET1", /* GPIO_11 */ + "NFC_DISABLE", /* GPIO_12 */ + "CAM_MCLK0", /* GPIO_13 */ + "CAM_MCLK1", /* GPIO_14 */ + "CAM_MCLK2", /* GPIO_15 */ + "ESE_PWR_REQ", /* GPIO_16 */ + "CCI_I2C_SDA0", /* GPIO_17 */ + "CCI_I2C_SCL0", /* GPIO_18 */ + "CCI_I2C_SDA1", /* GPIO_19 */ + "CCI_I2C_SCL1", /* GPIO_20 */ + "NFC_DWL_REQ", /* GPIO_21 */ + "CCI_TIMER1", /* GPIO_22 */ + "WEBCAM1_RESET_N", /* GPIO_23 */ + "ESE_IRQ", /* GPIO_24 */ + "NC", /* GPIO_25 */ + "WEBCAM1_STANDBY", /* GPIO_26 */ + "NC", /* GPIO_27 */ + "NC", /* GPIO_28 */ + "NC", /* GPIO_29 */ + "CAM_VDD_1P2_EN_2", /* GPIO_30 */ + "CAM_RESET_0", /* GPIO_31 */ + "CAM_RESET_1", /* GPIO_32 */ + "NC", /* GPIO_33 */ + "NC", /* GPIO_34 */ + "PCI_E0_RST_N", /* GPIO_35 */ + "PCI_E0_CLKREQ_N", /* GPIO_36 */ + "PCI_E0_WAKE", /* GPIO_37 */ + "CHARGER_INT", /* GPIO_38 */ + "CHARGER_RESET", /* GPIO_39 */ + "NC", /* GPIO_40 */ + "QCA_UART_TXD", /* GPIO_41 */ + "QCA_UART_RXD", /* GPIO_42 */ + "QCA_UART_CTS", /* GPIO_43 */ + "QCA_UART_RTS", /* GPIO_44 */ + "MAWC_UART_TX", /* GPIO_45 */ + "MAWC_UART_RX", /* GPIO_46 */ + "NC", /* GPIO_47 */ + "NC", /* GPIO_48 */ + "NC", /* GPIO_49 */ + "FP_SPI_RST", /* GPIO_50 */ + "TYPEC_I2C_SDA", /* GPIO_51 */ + "TYPEC_I2C_SCL", /* GPIO_52 */ + "CODEC_INT2_N", /* GPIO_53 */ + "CODEC_INT1_N", /* GPIO_54 */ + "APPS_I2C7_SDA", /* GPIO_55 */ + "APPS_I2C7_SCL", /* GPIO_56 */ + "FORCE_USB_BOOT", /* GPIO_57 */ + "NC", /* GPIO_58 */ + "NC", /* GPIO_59 */ + "NC", /* GPIO_60 */ + "NC", /* GPIO_61 */ + "ESE_RSTN", /* GPIO_62 */ + "TYPEC_INT", /* GPIO_63 */ + "CODEC_RESET_N", /* GPIO_64 */ + "PCM_CLK", /* GPIO_65 */ + "PCM_SYNC", /* GPIO_66 */ + "PCM_DIN", /* GPIO_67 */ + "PCM_DOUT", /* GPIO_68 */ + "CDC_44K1_CLK", /* GPIO_69 */ + "SLIMBUS_CLK", /* GPIO_70 */ + "SLIMBUS_DATA0", /* GPIO_71 */ + "SLIMBUS_DATA1", /* GPIO_72 */ + "LDO_5V_IN_EN", /* GPIO_73 */ + "TYPEC_EN_N", /* GPIO_74 */ + "NC", /* GPIO_75 */ + "NC", /* GPIO_76 */ + "NC", /* GPIO_77 */ + "NC", /* GPIO_78 */ + "NC", /* GPIO_79 */ + "SENSOR_RESET_N", /* GPIO_80 */ + "FP_SPI_MOSI", /* GPIO_81 */ + "FP_SPI_MISO", /* GPIO_82 */ + "FP_SPI_CS_N", /* GPIO_83 */ + "FP_SPI_CLK", /* GPIO_84 */ + "NC", /* GPIO_85 */ + "CAM_VDD_1P2_EN", /* GPIO_86 */ + "MSM_TS_I2C_SDA", /* GPIO_87 */ + "MSM_TS_I2C_SCL", /* GPIO_88 */ + "TS_RESOUT_N", /* GPIO_89 */ + "ESE_SPI_CS_N", /* GPIO_90 */ + "NC", /* GPIO_91 */ + "CAM2_AVDD_EN", /* GPIO_92 */ + "CAM2_VCM_EN", /* GPIO_93 */ + "NC", /* GPIO_94 */ + "NC", /* GPIO_95 */ + "NC", /* GPIO_96 */ + "GRFC_0", /* GPIO_97 */ + "GRFC_1", /* GPIO_98 */ + "NC", /* GPIO_99 */ + "GRFC_3", /* GPIO_100 */ + "GRFC_4", /* GPIO_101 */ + "GRFC_5", /* GPIO_102 */ + "NC", /* GPIO_103 */ + "GRFC_7", /* GPIO_104 */ + "UIM2_DATA", /* GPIO_105 */ + "UIM2_CLK", /* GPIO_106 */ + "UIM2_RESET", /* GPIO_107 */ + "UIM2_PRESENT", /* GPIO_108 */ + "UIM1_DATA", /* GPIO_109 */ + "UIM1_CLK", /* GPIO_110 */ + "UIM1_RESET", /* GPIO_111 */ + "UIM1_PRESENT", /* GPIO_112 */ + "UIM_BATT_ALARM", /* GPIO_113 */ + "GRFC_8", /* GPIO_114 */ + "GRFC_9", /* GPIO_115 */ + "TX_GTR_THRES", /* GPIO_116 */ + "ACCEL_INT", /* GPIO_117 */ + "GYRO_INT", /* GPIO_118 */ + "COMPASS_INT", /* GPIO_119 */ + "PROXIMITY_INT_N", /* GPIO_120 */ + "FP_IRQ", /* GPIO_121 */ + "P_SENSE", /* GPIO_122 */ + "HALL_INTR2", /* GPIO_123 */ + "HALL_INTR1", /* GPIO_124 */ + "TS_INT_N", /* GPIO_125 */ + "NC", /* GPIO_126 */ + "GRFC_11", /* GPIO_127 */ + "NC", /* GPIO_128 */ + "EXT_GPS_LNA_EN", /* GPIO_129 */ + "NC", /* GPIO_130 */ + "LCD_ID_DET2", /* GPIO_131 */ + "LCD_TE2", /* GPIO_132 */ + "GRFC_14", /* GPIO_133 */ + "GSM_TX2_PHASE_D", /* GPIO_134 */ + "NC", /* GPIO_135 */ + "GRFC_15", /* GPIO_136 */ + "RFFE3_DATA", /* GPIO_137 */ + "RFFE3_CLK", /* GPIO_138 */ + "NC", /* GPIO_139 */ + "NC", /* GPIO_140 */ + "RFFE5_DATA", /* GPIO_141 */ + "RFFE5_CLK", /* GPIO_142 */ + "NC", /* GPIO_143 */ + "COEX_UART_TX", /* GPIO_144 */ + "COEX_UART_RX", /* GPIO_145 */ + "RFFE2_DATA", /* GPIO_146 */ + "RFFE2_CLK", /* GPIO_147 */ + "RFFE1_DATA", /* GPIO_148 */ + "RFFE1_CLK"; /* GPIO_149 */ + + touchscreen_default: touchscreen-default { + pins = "gpio89", "gpio125"; + function = "gpio"; + drive-strength = <10>; + bias-pull-up; + }; + + touchscreen_sleep: touchscreen-sleep { + pins = "gpio89", "gpio125"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts new file mode 100644 index 000000000..79be5fb12 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts @@ -0,0 +1,498 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Yassine Oudjana + */ + +/dts-v1/; + +#include "msm8996-xiaomi-common.dtsi" +#include "pmi8996.dtsi" +#include +#include +#include + +/ { + model = "Xiaomi Mi Note 2"; + compatible = "xiaomi,scorpio", "qcom,msm8996"; + chassis-type = "handset"; + qcom,msm-id = <305 0x10000>; + qcom,board-id = <34 0>; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer0: framebuffer@83401000 { + compatible = "simple-framebuffer"; + reg = <0x00 0x83401000 0x00 (1080 * 1920 * 3)>; + width = <1080>; + height = <1920>; + stride = <(1080 * 3)>; + format = "r8g8b8"; + + /* DSI0 and MDP SMMU clocks */ + clocks = <&mmcc MDSS_MDP_CLK>, + <&mmcc MMSS_MMAGIC_AHB_CLK>, + <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MMSS_MISC_AHB_CLK>, + <&mmcc MDSS_BYTE0_CLK>, + <&mmcc MDSS_PCLK0_CLK>, + <&mmcc MDSS_ESC0_CLK>, + <&mmcc SMMU_MDP_AHB_CLK>, + <&mmcc SMMU_MDP_AXI_CLK>; + + /* MDSS power domain */ + power-domains = <&mmcc MDSS_GDSC>; + }; + }; + + reserved-memory { + cont_splash_mem: memory@83401000 { + reg = <0x0 0x83401000 0x0 (1080 * 1920 * 3)>; + no-map; + }; + }; +}; + +&adsp_pil { + firmware-name = "qcom/msm8996/scorpio/adsp.mbn"; +}; + +&blsp2_i2c6 { + touchkey: touchkey@28 { + compatible = "cypress,sf3155"; + reg = <0x28>; + interrupt-parent = <&tlmm>; + interrupts = <77 IRQ_TYPE_EDGE_FALLING>; + avdd-supply = <&vreg_l6a_1p8>; + vdd-supply = <&vdd_3v2_tp>; + linux,keycodes = ; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&touchkey_default>; + pinctrl-1 = <&touchkey_sleep>; + }; + + touchscreen: atmel-mxt-ts@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + interrupt-parent = <&tlmm>; + interrupts = <125 IRQ_TYPE_LEVEL_LOW>; + vdda-supply = <&vreg_l6a_1p8>; + vdd-supply = <&vdd_3v2_tp>; + reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&touchscreen_default>; + pinctrl-1 = <&touchscreen_sleep>; + }; +}; + +&gpu { + zap-shader { + firmware-name = "qcom/msm8996/scorpio/a530_zap.mbn"; + }; +}; + +&mdp_smmu { + /* + * Probing this SMMU causes a crash due to writing to some secure + * registers. Disable it for now. + */ + status = "disabled"; +}; + +&mdss { + /* + * MDSS depends on the MDP SMMU, and probing it alters the bootloader + * configured framebuffer used by simplefb. Disable it for now. + */ + status = "disabled"; +}; + +&mss_pil { + firmware-name = "qcom/msm8996/scorpio/mba.mbn", + "qcom/msm8996/scorpio/modem.mbn"; +}; + +&pm8994_lpg { + pinctrl-names = "default"; + pinctrl-0 = <&keypad_default>; + + led@3 { + reg = <3>; + color = ; + function = LED_FUNCTION_KBD_BACKLIGHT; + function-enumerator = <1>; + }; + + led@6 { + reg = <6>; + color = ; + function = LED_FUNCTION_KBD_BACKLIGHT; + function-enumerator = <0>; + }; +}; + +&q6asmdai { + dai@0 { + reg = <0>; + }; + + dai@1 { + reg = <1>; + }; + + dai@2 { + reg = <2>; + }; +}; + +&slpi_pil { + firmware-name = "qcom/msm8996/scorpio/slpi.mbn"; +}; + +&sound { + compatible = "qcom,apq8096-sndcard"; + model = "scorpio"; + audio-routing = "RX_BIAS", "MCLK"; + + mm1-dai-link { + link-name = "MultiMedia1"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + mm2-dai-link { + link-name = "MultiMedia2"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + mm3-dai-link { + link-name = "MultiMedia3"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + slim-dai-link { + link-name = "SLIM Playback"; + cpu { + sound-dai = <&q6afedai SLIMBUS_6_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9335 AIF4_PB>; + }; + }; + + slimcap-dai-link { + link-name = "SLIM Capture"; + cpu { + sound-dai = <&q6afedai SLIMBUS_0_TX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9335 AIF1_CAP>; + }; + }; +}; + +&venus { + firmware-name = "qcom/msm8996/scorpio/venus.mbn"; +}; + +&rpm_requests { + pm8994-regulators { + vreg_l3a_0p875: l3 { + regulator-name = "vreg_l3a_0p875"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1300000>; + }; + vreg_l11a_1p1: l11 { + regulator-name = "vreg_l11a_1p1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + vreg_l17a_2p8: l17 { + regulator-name = "vreg_l17a_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + vreg_l18a_2p8: l18 { + regulator-name = "vreg_l18a_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + vreg_l22a_3p0: l22 { + regulator-name = "vreg_l22a_3p0"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <3500000>; + }; + vreg_l29a_2p7: l29 { + regulator-name = "vreg_l29a_2p7"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + }; +}; + +&vdd_gfx { + regulator-max-microvolt = <1065000>; +}; + +&pm8994_gpios { + gpio-line-names = + "NC", /* GPIO_1 */ + "VOL_UP_N", /* GPIO_2 */ + "SPKR_ID", /* GPIO_3 */ + "PWM_HAPTICS", /* GPIO_4 */ + "INFARED_DRV", /* GPIO_5 */ + "NC", /* GPIO_6 */ + "KEYPAD_LED_EN_A", /* GPIO_7 */ + "WL_EN", /* GPIO_8 */ + "3P3_ENABLE", /* GPIO_9 */ + "KEYPAD_LED_EN_B", /* GPIO_10 */ + "FP_ID", /* GPIO_11 */ + "NC", /* GPIO_12 */ + "NC", /* GPIO_13 */ + "NC", /* GPIO_14 */ + "DIVCLK1_CDC", /* GPIO_15 */ + "DIVCLK2_HAPTICS", /* GPIO_16 */ + "NC", /* GPIO_17 */ + "32KHz_CLK_IN", /* GPIO_18 */ + "BT_EN", /* GPIO_19 */ + "PMIC_SLB", /* GPIO_20 */ + "UIM_BATT_ALARM", /* GPIO_21 */ + "NC"; /* GPIO_22 */ + + keypad_default: keypad-default-state { + pins = "gpio7", "gpio10"; + function = PMIC_GPIO_FUNC_FUNC1; + output-low; + qcom,drive-strength = ; + power-source = ; + bias-disable; + }; +}; + +&pm8994_mpps { + gpio-line-names = + "VREF_SDC_UIM_APC", /* MPP_1 */ + "NC", /* MPP_2 */ + "VREF_DACX", /* MPP_3 */ + "NC", /* MPP_4 */ + "NC", /* MPP_5 */ + "STAT_SMB1351", /* MPP_6 */ + "NC", /* MPP_7 */ + "NC"; /* MPP_8 */ +}; + +&pmi8994_gpios { + gpio-line-names = + "NC", /* GPIO_1 */ + "SPKR_PA_RST", /* GPIO_2 */ + "NC", /* GPIO_3 */ + "NC", /* GPIO_4 */ + "NC", /* GPIO_5 */ + "NC", /* GPIO_6 */ + "NC", /* GPIO_7 */ + "NC", /* GPIO_8 */ + "NC", /* GPIO_9 */ + "NC"; /* GPIO_10 */ +}; + +&tlmm { + gpio-line-names = + "ESE_SPI_MOSI", /* GPIO_0 */ + "ESE_SPI_MISO", /* GPIO_1 */ + "NC", /* GPIO_2 */ + "ESE_SPI_CLK", /* GPIO_3 */ + "MSM_UART_TX", /* GPIO_4 */ + "MSM_UART_RX", /* GPIO_5 */ + "NFC_I2C_SDA", /* GPIO_6 */ + "NFC_I2C_SCL", /* GPIO_7 */ + "OLED_RESET_N", /* GPIO_8 */ + "NFC_IRQ", /* GPIO_9 */ + "OLED_TE", /* GPIO_10 */ + "OLED_ID_DET1", /* GPIO_11 */ + "NFC_DISABLE", /* GPIO_12 */ + "CAM_MCLK0", /* GPIO_13 */ + "OLED_ID_DET2", /* GPIO_14 */ + "CAM_MCLK2", /* GPIO_15 */ + "ESE_PWR_REQ", /* GPIO_16 */ + "CCI_I2C_SDA0", /* GPIO_17 */ + "CCI_I2C_SCL0", /* GPIO_18 */ + "CCI_I2C_SDA1", /* GPIO_19 */ + "CCI_I2C_SCL1", /* GPIO_20 */ + "NFC_DWL_REQ", /* GPIO_21 */ + "CCI_TIMER1", /* GPIO_22 */ + "WEBCAM1_RESET_N", /* GPIO_23 */ + "ESE_IRQ", /* GPIO_24 */ + "NC", /* GPIO_25 */ + "WEBCAM1_STANDBY", /* GPIO_26 */ + "NC", /* GPIO_27 */ + "NC", /* GPIO_28 */ + "OLED_ERR_FG", /* GPIO_29 */ + "CAM1_RST_N", /* GPIO_30 */ + "HIFI_SW_MUTE", /* GPIO_31 */ + "NC", /* GPIO_32 */ + "NC", /* GPIO_33 */ + "FP_DOME_SW", /* GPIO_34 */ + "PCI_E0_RST_N", /* GPIO_35 */ + "PCI_E0_CLKREQ_N", /* GPIO_36 */ + "PCI_E0_WAKE", /* GPIO_37 */ + "OV_PWDN", /* GPIO_38 */ + "NC", /* GPIO_39 */ + "VDDR_1P6_EN", /* GPIO_40 */ + "QCA_UART_TXD", /* GPIO_41 */ + "QCA_UART_RXD", /* GPIO_42 */ + "QCA_UART_CTS", /* GPIO_43 */ + "QCA_UART_RTS", /* GPIO_44 */ + "MAWC_UART_TX", /* GPIO_45 */ + "MAWC_UART_RX", /* GPIO_46 */ + "NC", /* GPIO_47 */ + "NC", /* GPIO_48 */ + "AUDIO_SWITCH_EN", /* GPIO_49 */ + "FP_SPI_RST", /* GPIO_50 */ + "TYPEC_I2C_SDA", /* GPIO_51 */ + "TYPEC_I2C_SCL", /* GPIO_52 */ + "CODEC_INT2_N", /* GPIO_53 */ + "CODEC_INT1_N", /* GPIO_54 */ + "APPS_I2C7_SDA", /* GPIO_55 */ + "APPS_I2C7_SCL", /* GPIO_56 */ + "FORCE_USB_BOOT", /* GPIO_57 */ + "SPKR_I2S_BCK", /* GPIO_58 */ + "SPKR_I2S_WS", /* GPIO_59 */ + "SPKR_I2S_DOUT", /* GPIO_60 */ + "SPKR_I2S_DIN", /* GPIO_61 */ + "ESE_RSTN", /* GPIO_62 */ + "TYPEC_INT", /* GPIO_63 */ + "CODEC_RESET_N", /* GPIO_64 */ + "PCM_CLK", /* GPIO_65 */ + "PCM_SYNC", /* GPIO_66 */ + "PCM_DIN", /* GPIO_67 */ + "PCM_DOUT", /* GPIO_68 */ + "CDC_44K1_CLK", /* GPIO_69 */ + "SLIMBUS_CLK", /* GPIO_70 */ + "SLIMBUS_DATA0", /* GPIO_71 */ + "SLIMBUS_DATA1", /* GPIO_72 */ + "LDO_5V_IN_EN", /* GPIO_73 */ + "NC", /* GPIO_74 */ + "TSP_RST_N", /* GPIO_75 */ + "NC", /* GPIO_76 */ + "TOUCHKEY_INT", /* GPIO_77 */ + "SPKR_I2S_MCLK", /* GPIO_78 */ + "SPKR_PA_INT", /* GPIO_79 */ + "SENSOR_RESET_N", /* GPIO_80 */ + "FP_SPI_MOSI", /* GPIO_81 */ + "FP_SPI_MISO", /* GPIO_82 */ + "FP_SPI_CS_N", /* GPIO_83 */ + "FP_SPI_CLK", /* GPIO_84 */ + "HIFI_SD", /* GPIO_85 */ + "CAM_VDD_1P05_EN", /* GPIO_86 */ + "MSM_TS_I2C_SDA", /* GPIO_87 */ + "MSM_TS_I2C_SCL", /* GPIO_88 */ + "NC", /* GPIO_89 */ + "ESE_SPI_CS_N", /* GPIO_90 */ + "NC", /* GPIO_91 */ + "NC", /* GPIO_92 */ + "NC", /* GPIO_93 */ + "NC", /* GPIO_94 */ + "NC", /* GPIO_95 */ + "NC", /* GPIO_96 */ + "GRFC_0", /* GPIO_97 */ + "GRFC_1", /* GPIO_98 */ + "NC", /* GPIO_99 */ + "GRFC_3", /* GPIO_100 */ + "GRFC_4", /* GPIO_101 */ + "NC", /* GPIO_102 */ + "NC", /* GPIO_103 */ + "GRFC_7", /* GPIO_104 */ + "UIM2_DATA", /* GPIO_105 */ + "UIM2_CLK", /* GPIO_106 */ + "UIM2_RESET", /* GPIO_107 */ + "UIM2_PRESENT", /* GPIO_108 */ + "UIM1_DATA", /* GPIO_109 */ + "UIM1_CLK", /* GPIO_110 */ + "UIM1_RESET", /* GPIO_111 */ + "UIM1_PRESENT", /* GPIO_112 */ + "UIM_BATT_ALARM", /* GPIO_113 */ + "GRFC_8", /* GPIO_114 */ + "GRFC_9", /* GPIO_115 */ + "TX_GTR_THRES", /* GPIO_116 */ + "ACC_INT", /* GPIO_117 */ + "GYRO_INT", /* GPIO_118 */ + "COMPASS_INT", /* GPIO_119 */ + "PROXIMITY_INT_N", /* GPIO_120 */ + "FP_IRQ", /* GPIO_121 */ + "TSP_TA", /* GPIO_122 */ + "HALL_INTR2", /* GPIO_123 */ + "HALL_INTR1", /* GPIO_124 */ + "TS_INT_N", /* GPIO_125 */ + "NC", /* GPIO_126 */ + "GRFC_11", /* GPIO_127 */ + "HIFI_PWR_EN", /* GPIO_128 */ + "EXT_GPS_LNA_EN", /* GPIO_129 */ + "NC", /* GPIO_130 */ + "NC", /* GPIO_131 */ + "NC", /* GPIO_132 */ + "GRFC_14", /* GPIO_133 */ + "GSM_TX2_PHASE_D", /* GPIO_134 */ + "HIFI_SW_SEL", /* GPIO_135 */ + "GRFC_15", /* GPIO_136 */ + "RFFE3_DATA", /* GPIO_137 */ + "RFFE3_CLK", /* GPIO_138 */ + "NC", /* GPIO_139 */ + "NC", /* GPIO_140 */ + "RFFE5_DATA", /* GPIO_141 */ + "RFFE5_CLK", /* GPIO_142 */ + "NC", /* GPIO_143 */ + "COEX_UART_TX", /* GPIO_144 */ + "COEX_UART_RX", /* GPIO_145 */ + "RFFE2_DATA", /* GPIO_146 */ + "RFFE2_CLK", /* GPIO_147 */ + "RFFE1_DATA", /* GPIO_148 */ + "RFFE1_CLK"; /* GPIO_149 */ + + touchkey_default: touchkey_default { + pins = "gpio77"; + function = "gpio"; + drive-strength = <16>; + bias-pull-up; + }; + + touchkey_sleep: touchkey_sleep { + pins = "gpio77"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + touchscreen_default: touchscreen_default { + pins = "gpio75", "gpio125"; + function = "gpio"; + drive-strength = <10>; + bias-pull-up; + }; + + touchscreen_sleep: touchscreen_sleep { + pins = "gpio75", "gpio125"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi new file mode 100644 index 000000000..9de2248a3 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -0,0 +1,3811 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* Copyright (c) 2014-2015, The Linux Foundation. All rights reserved. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + clock-output-names = "xo_board"; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32764>; + clock-output-names = "sleep_clk"; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x0>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + capacity-dmips-mhz = <1024>; + clocks = <&kryocc 0>; + operating-points-v2 = <&cluster0_opp>; + #cooling-cells = <2>; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x1>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + capacity-dmips-mhz = <1024>; + clocks = <&kryocc 0>; + operating-points-v2 = <&cluster0_opp>; + #cooling-cells = <2>; + next-level-cache = <&L2_0>; + }; + + CPU2: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x100>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + capacity-dmips-mhz = <1024>; + clocks = <&kryocc 1>; + operating-points-v2 = <&cluster1_opp>; + #cooling-cells = <2>; + next-level-cache = <&L2_1>; + L2_1: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + CPU3: cpu@101 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x101>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + capacity-dmips-mhz = <1024>; + clocks = <&kryocc 1>; + operating-points-v2 = <&cluster1_opp>; + #cooling-cells = <2>; + next-level-cache = <&L2_1>; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + }; + + cluster1 { + core0 { + cpu = <&CPU2>; + }; + + core1 { + cpu = <&CPU3>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + CPU_SLEEP_0: cpu-sleep-0 { + compatible = "arm,idle-state"; + idle-state-name = "standalone-power-collapse"; + arm,psci-suspend-param = <0x00000004>; + entry-latency-us = <130>; + exit-latency-us = <80>; + min-residency-us = <300>; + }; + }; + }; + + cluster0_opp: opp-table-cluster0 { + compatible = "operating-points-v2-kryo-cpu"; + nvmem-cells = <&speedbin_efuse>; + opp-shared; + + /* Nominal fmax for now */ + opp-307200000 { + opp-hz = /bits/ 64 <307200000>; + opp-supported-hw = <0x7>; + clock-latency-ns = <200000>; + }; + opp-422400000 { + opp-hz = /bits/ 64 <422400000>; + opp-supported-hw = <0x7>; + clock-latency-ns = <200000>; + }; + opp-480000000 { + opp-hz = /bits/ 64 <480000000>; + opp-supported-hw = <0x7>; + clock-latency-ns = <200000>; + }; + opp-556800000 { + opp-hz = /bits/ 64 <556800000>; + opp-supported-hw = <0x7>; + clock-latency-ns = <200000>; + }; + opp-652800000 { + opp-hz = /bits/ 64 <652800000>; + opp-supported-hw = <0x7>; + clock-latency-ns = <200000>; + }; + opp-729600000 { + opp-hz = /bits/ 64 <729600000>; + opp-supported-hw = <0x7>; + clock-latency-ns = <200000>; + }; + opp-844800000 { + opp-hz = /bits/ 64 <844800000>; + opp-supported-hw = <0x7>; + clock-latency-ns = <200000>; + }; + opp-960000000 { + opp-hz = /bits/ 64 <960000000>; + opp-supported-hw = <0x7>; + clock-latency-ns = <200000>; + }; + opp-1036800000 { + opp-hz = /bits/ 64 <1036800000>; + opp-supported-hw = <0x7>; + clock-latency-ns = <200000>; + }; + opp-1113600000 { + opp-hz = /bits/ 64 <1113600000>; + opp-supported-hw = <0x7>; + clock-latency-ns = <200000>; + }; + opp-1190400000 { + opp-hz = /bits/ 64 <1190400000>; + opp-supported-hw = <0x7>; + clock-latency-ns = <200000>; + }; + opp-1228800000 { + opp-hz = /bits/ 64 <1228800000>; + opp-supported-hw = <0x7>; + clock-latency-ns = <200000>; + }; + opp-1324800000 { + opp-hz = /bits/ 64 <1324800000>; + opp-supported-hw = <0x5>; + clock-latency-ns = <200000>; + }; + opp-1363200000 { + opp-hz = /bits/ 64 <1363200000>; + opp-supported-hw = <0x2>; + clock-latency-ns = <200000>; + }; + opp-1401600000 { + opp-hz = /bits/ 64 <1401600000>; + opp-supported-hw = <0x5>; + clock-latency-ns = <200000>; + }; + opp-1478400000 { + opp-hz = /bits/ 64 <1478400000>; + opp-supported-hw = <0x1>; + clock-latency-ns = <200000>; + }; + opp-1497600000 { + opp-hz = /bits/ 64 <1497600000>; + opp-supported-hw = <0x04>; + clock-latency-ns = <200000>; + }; + opp-1593600000 { + opp-hz = /bits/ 64 <1593600000>; + opp-supported-hw = <0x1>; + clock-latency-ns = <200000>; + }; + }; + + cluster1_opp: opp-table-cluster1 { + compatible = "operating-points-v2-kryo-cpu"; + nvmem-cells = <&speedbin_efuse>; + opp-shared; + + /* Nominal fmax for now */ + opp-307200000 { + opp-hz = /bits/ 64 <307200000>; + opp-supported-hw = <0x7>; + clock-latency-ns = <200000>; + }; + opp-403200000 { + opp-hz = /bits/ 64 <403200000>; + opp-supported-hw = <0x7>; + clock-latency-ns = <200000>; + }; + opp-480000000 { + opp-hz = /bits/ 64 <480000000>; + opp-supported-hw = <0x7>; + clock-latency-ns = <200000>; + }; + opp-556800000 { + opp-hz = /bits/ 64 <556800000>; + opp-supported-hw = <0x7>; + clock-latency-ns = <200000>; + }; + opp-652800000 { + opp-hz = /bits/ 64 <652800000>; + opp-supported-hw = <0x7>; + clock-latency-ns = <200000>; + }; + opp-729600000 { + opp-hz = /bits/ 64 <729600000>; + opp-supported-hw = <0x7>; + clock-latency-ns = <200000>; + }; + opp-806400000 { + opp-hz = /bits/ 64 <806400000>; + opp-supported-hw = <0x7>; + clock-latency-ns = <200000>; + }; + opp-883200000 { + opp-hz = /bits/ 64 <883200000>; + opp-supported-hw = <0x7>; + clock-latency-ns = <200000>; + }; + opp-940800000 { + opp-hz = /bits/ 64 <940800000>; + opp-supported-hw = <0x7>; + clock-latency-ns = <200000>; + }; + opp-1036800000 { + opp-hz = /bits/ 64 <1036800000>; + opp-supported-hw = <0x7>; + clock-latency-ns = <200000>; + }; + opp-1113600000 { + opp-hz = /bits/ 64 <1113600000>; + opp-supported-hw = <0x7>; + clock-latency-ns = <200000>; + }; + opp-1190400000 { + opp-hz = /bits/ 64 <1190400000>; + opp-supported-hw = <0x7>; + clock-latency-ns = <200000>; + }; + opp-1248000000 { + opp-hz = /bits/ 64 <1248000000>; + opp-supported-hw = <0x7>; + clock-latency-ns = <200000>; + }; + opp-1324800000 { + opp-hz = /bits/ 64 <1324800000>; + opp-supported-hw = <0x7>; + clock-latency-ns = <200000>; + }; + opp-1401600000 { + opp-hz = /bits/ 64 <1401600000>; + opp-supported-hw = <0x7>; + clock-latency-ns = <200000>; + }; + opp-1478400000 { + opp-hz = /bits/ 64 <1478400000>; + opp-supported-hw = <0x7>; + clock-latency-ns = <200000>; + }; + opp-1555200000 { + opp-hz = /bits/ 64 <1555200000>; + opp-supported-hw = <0x7>; + clock-latency-ns = <200000>; + }; + opp-1632000000 { + opp-hz = /bits/ 64 <1632000000>; + opp-supported-hw = <0x7>; + clock-latency-ns = <200000>; + }; + opp-1708800000 { + opp-hz = /bits/ 64 <1708800000>; + opp-supported-hw = <0x7>; + clock-latency-ns = <200000>; + }; + opp-1785600000 { + opp-hz = /bits/ 64 <1785600000>; + opp-supported-hw = <0x7>; + clock-latency-ns = <200000>; + }; + opp-1804800000 { + opp-hz = /bits/ 64 <1804800000>; + opp-supported-hw = <0x6>; + clock-latency-ns = <200000>; + }; + opp-1824000000 { + opp-hz = /bits/ 64 <1824000000>; + opp-supported-hw = <0x1>; + clock-latency-ns = <200000>; + }; + opp-1900800000 { + opp-hz = /bits/ 64 <1900800000>; + opp-supported-hw = <0x4>; + clock-latency-ns = <200000>; + }; + opp-1920000000 { + opp-hz = /bits/ 64 <1920000000>; + opp-supported-hw = <0x1>; + clock-latency-ns = <200000>; + }; + opp-1996800000 { + opp-hz = /bits/ 64 <1996800000>; + opp-supported-hw = <0x1>; + clock-latency-ns = <200000>; + }; + opp-2073600000 { + opp-hz = /bits/ 64 <2073600000>; + opp-supported-hw = <0x1>; + clock-latency-ns = <200000>; + }; + opp-2150400000 { + opp-hz = /bits/ 64 <2150400000>; + opp-supported-hw = <0x1>; + clock-latency-ns = <200000>; + }; + }; + + firmware { + scm { + compatible = "qcom,scm-msm8996", "qcom,scm"; + qcom,dload-mode = <&tcsr_2 0x13000>; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the reg */ + reg = <0x0 0x80000000 0x0 0x0>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: memory@85800000 { + reg = <0x0 0x85800000 0x0 0x600000>; + no-map; + }; + + xbl_mem: memory@85e00000 { + reg = <0x0 0x85e00000 0x0 0x200000>; + no-map; + }; + + smem_mem: smem-mem@86000000 { + reg = <0x0 0x86000000 0x0 0x200000>; + no-map; + }; + + tz_mem: memory@86200000 { + reg = <0x0 0x86200000 0x0 0x2600000>; + no-map; + }; + + rmtfs_mem: rmtfs { + compatible = "qcom,rmtfs-mem"; + + size = <0x0 0x200000>; + alloc-ranges = <0x0 0xa0000000 0x0 0x2000000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + + mpss_mem: mpss@88800000 { + reg = <0x0 0x88800000 0x0 0x6200000>; + no-map; + }; + + adsp_mem: adsp@8ea00000 { + reg = <0x0 0x8ea00000 0x0 0x1b00000>; + no-map; + }; + + slpi_mem: slpi@90500000 { + reg = <0x0 0x90500000 0x0 0xa00000>; + no-map; + }; + + gpu_mem: gpu@90f00000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x90f00000 0x0 0x100000>; + no-map; + }; + + venus_mem: venus@91000000 { + reg = <0x0 0x91000000 0x0 0x500000>; + no-map; + }; + + mba_mem: mba@91500000 { + reg = <0x0 0x91500000 0x0 0x200000>; + no-map; + }; + }; + + rpm-glink { + compatible = "qcom,glink-rpm"; + + interrupts = ; + + qcom,rpm-msg-ram = <&rpm_msg_ram>; + + mboxes = <&apcs_glb 0>; + + rpm_requests: rpm-requests { + compatible = "qcom,rpm-msm8996"; + qcom,glink-channels = "rpm_requests"; + + rpmcc: qcom,rpmcc { + compatible = "qcom,rpmcc-msm8996", "qcom,rpmcc"; + #clock-cells = <1>; + clocks = <&xo_board>; + clock-names = "xo"; + }; + + rpmpd: power-controller { + compatible = "qcom,msm8996-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp1: opp1 { + opp-level = <1>; + }; + + rpmpd_opp2: opp2 { + opp-level = <2>; + }; + + rpmpd_opp3: opp3 { + opp-level = <3>; + }; + + rpmpd_opp4: opp4 { + opp-level = <4>; + }; + + rpmpd_opp5: opp5 { + opp-level = <5>; + }; + + rpmpd_opp6: opp6 { + opp-level = <6>; + }; + }; + }; + }; + }; + + smem { + compatible = "qcom,smem"; + memory-region = <&smem_mem>; + hwlocks = <&tcsr_mutex 3>; + }; + + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupts = <0 158 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apcs_glb 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-mpss { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + + interrupts = ; + + mboxes = <&apcs_glb 14>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + mpss_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + mpss_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-slpi { + compatible = "qcom,smp2p"; + qcom,smem = <481>, <430>; + + interrupts = ; + + mboxes = <&apcs_glb 26>; + + qcom,local-pid = <0>; + qcom,remote-pid = <3>; + + slpi_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + slpi_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + compatible = "simple-bus"; + + pcie_phy: phy-wrapper@34000 { + compatible = "qcom,msm8996-qmp-pcie-phy"; + reg = <0x00034000 0x488>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x00034000 0x4000>; + + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_PHY_CFG_AHB_CLK>, + <&gcc GCC_PCIE_CLKREF_CLK>; + clock-names = "aux", "cfg_ahb", "ref"; + + resets = <&gcc GCC_PCIE_PHY_BCR>, + <&gcc GCC_PCIE_PHY_COM_BCR>, + <&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>; + reset-names = "phy", "common", "cfg"; + + status = "disabled"; + + pciephy_0: phy@1000 { + reg = <0x1000 0x130>, + <0x1200 0x200>, + <0x1400 0x1dc>; + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "pipe0"; + resets = <&gcc GCC_PCIE_0_PHY_BCR>; + reset-names = "lane0"; + + #clock-cells = <0>; + clock-output-names = "pcie_0_pipe_clk_src"; + + #phy-cells = <0>; + }; + + pciephy_1: phy@2000 { + reg = <0x2000 0x130>, + <0x2200 0x200>, + <0x2400 0x1dc>; + + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; + clock-names = "pipe1"; + resets = <&gcc GCC_PCIE_1_PHY_BCR>; + reset-names = "lane1"; + + #clock-cells = <0>; + clock-output-names = "pcie_1_pipe_clk_src"; + + #phy-cells = <0>; + }; + + pciephy_2: phy@3000 { + reg = <0x3000 0x130>, + <0x3200 0x200>, + <0x3400 0x1dc>; + + clocks = <&gcc GCC_PCIE_2_PIPE_CLK>; + clock-names = "pipe2"; + resets = <&gcc GCC_PCIE_2_PHY_BCR>; + reset-names = "lane2"; + + #clock-cells = <0>; + clock-output-names = "pcie_2_pipe_clk_src"; + + #phy-cells = <0>; + }; + }; + + rpm_msg_ram: sram@68000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0x00068000 0x6000>; + }; + + qfprom@74000 { + compatible = "qcom,msm8996-qfprom", "qcom,qfprom"; + reg = <0x00074000 0x8ff>; + #address-cells = <1>; + #size-cells = <1>; + + qusb2p_hstx_trim: hstx_trim@24e { + reg = <0x24e 0x2>; + bits = <5 4>; + }; + + qusb2s_hstx_trim: hstx_trim@24f { + reg = <0x24f 0x1>; + bits = <1 4>; + }; + + speedbin_efuse: speedbin@133 { + reg = <0x133 0x1>; + bits = <5 3>; + }; + }; + + rng: rng@83000 { + compatible = "qcom,prng-ee"; + reg = <0x00083000 0x1000>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; + + gcc: clock-controller@300000 { + compatible = "qcom,gcc-msm8996"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0x00300000 0x90000>; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&rpmcc RPM_SMD_LN_BB_CLK>, + <&sleep_clk>, + <&pciephy_0>, + <&pciephy_1>, + <&pciephy_2>, + <&ssusb_phy_0>, + <0>, <0>, <0>; + clock-names = "cxo", + "cxo2", + "sleep_clk", + "pcie_0_pipe_clk_src", + "pcie_1_pipe_clk_src", + "pcie_2_pipe_clk_src", + "usb3_phy_pipe_clk_src", + "ufs_rx_symbol_0_clk_src", + "ufs_rx_symbol_1_clk_src", + "ufs_tx_symbol_0_clk_src"; + }; + + bimc: interconnect@408000 { + compatible = "qcom,msm8996-bimc"; + reg = <0x00408000 0x5a000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_BIMC_CLK>, + <&rpmcc RPM_SMD_BIMC_A_CLK>; + }; + + tsens0: thermal-sensor@4a9000 { + compatible = "qcom,msm8996-tsens", "qcom,tsens-v2"; + reg = <0x004a9000 0x1000>, /* TM */ + <0x004a8000 0x1000>; /* SROT */ + #qcom,sensors = <13>; + interrupts = , + ; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@4ad000 { + compatible = "qcom,msm8996-tsens", "qcom,tsens-v2"; + reg = <0x004ad000 0x1000>, /* TM */ + <0x004ac000 0x1000>; /* SROT */ + #qcom,sensors = <8>; + interrupts = , + ; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + cryptobam: dma-controller@644000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x00644000 0x24000>; + interrupts = ; + clocks = <&gcc GCC_CE1_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + }; + + crypto: crypto@67a000 { + compatible = "qcom,crypto-v5.4"; + reg = <0x0067a000 0x6000>; + clocks = <&gcc GCC_CE1_AHB_CLK>, + <&gcc GCC_CE1_AXI_CLK>, + <&gcc GCC_CE1_CLK>; + clock-names = "iface", "bus", "core"; + dmas = <&cryptobam 6>, <&cryptobam 7>; + dma-names = "rx", "tx"; + }; + + cnoc: interconnect@500000 { + compatible = "qcom,msm8996-cnoc"; + reg = <0x00500000 0x1000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_CNOC_CLK>, + <&rpmcc RPM_SMD_CNOC_A_CLK>; + }; + + snoc: interconnect@524000 { + compatible = "qcom,msm8996-snoc"; + reg = <0x00524000 0x1c000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_SNOC_CLK>, + <&rpmcc RPM_SMD_SNOC_A_CLK>; + }; + + a0noc: interconnect@543000 { + compatible = "qcom,msm8996-a0noc"; + reg = <0x00543000 0x6000>; + #interconnect-cells = <1>; + clock-names = "aggre0_snoc_axi", + "aggre0_cnoc_ahb", + "aggre0_noc_mpu_cfg"; + clocks = <&gcc GCC_AGGRE0_SNOC_AXI_CLK>, + <&gcc GCC_AGGRE0_CNOC_AHB_CLK>, + <&gcc GCC_AGGRE0_NOC_MPU_CFG_AHB_CLK>; + power-domains = <&gcc AGGRE0_NOC_GDSC>; + }; + + a1noc: interconnect@562000 { + compatible = "qcom,msm8996-a1noc"; + reg = <0x00562000 0x5000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_AGGR1_NOC_CLK>, + <&rpmcc RPM_SMD_AGGR1_NOC_A_CLK>; + }; + + a2noc: interconnect@583000 { + compatible = "qcom,msm8996-a2noc"; + reg = <0x00583000 0x7000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a", "aggre2_ufs_axi", "ufs_axi"; + clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>, + <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>, + <&gcc GCC_AGGRE2_UFS_AXI_CLK>, + <&gcc GCC_UFS_AXI_CLK>; + }; + + mnoc: interconnect@5a4000 { + compatible = "qcom,msm8996-mnoc"; + reg = <0x005a4000 0x1c000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a", "iface"; + clocks = <&rpmcc RPM_SMD_MMAXI_CLK>, + <&rpmcc RPM_SMD_MMAXI_A_CLK>, + <&mmcc AHB_CLK_SRC>; + }; + + pnoc: interconnect@5c0000 { + compatible = "qcom,msm8996-pnoc"; + reg = <0x005c0000 0x3000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_PCNOC_CLK>, + <&rpmcc RPM_SMD_PCNOC_A_CLK>; + }; + + tcsr_mutex: hwlock@740000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x00740000 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr_1: syscon@760000 { + compatible = "qcom,tcsr-msm8996", "syscon"; + reg = <0x00760000 0x20000>; + }; + + tcsr_2: syscon@7a0000 { + compatible = "qcom,tcsr-msm8996", "syscon"; + reg = <0x007a0000 0x18000>; + }; + + mmcc: clock-controller@8c0000 { + compatible = "qcom,mmcc-msm8996"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0x008c0000 0x40000>; + clocks = <&xo_board>, + <&gcc GCC_MMSS_NOC_CFG_AHB_CLK>, + <&gcc GPLL0>, + <&dsi0_phy 1>, + <&dsi0_phy 0>, + <0>, + <0>, + <0>; + clock-names = "xo", + "gcc_mmss_noc_cfg_ahb_clk", + "gpll0", + "dsi0pll", + "dsi0pllbyte", + "dsi1pll", + "dsi1pllbyte", + "hdmipll"; + assigned-clocks = <&mmcc MMPLL9_PLL>, + <&mmcc MMPLL1_PLL>, + <&mmcc MMPLL3_PLL>, + <&mmcc MMPLL4_PLL>, + <&mmcc MMPLL5_PLL>; + assigned-clock-rates = <624000000>, + <810000000>, + <980000000>, + <960000000>, + <825000000>; + }; + + mdss: mdss@900000 { + compatible = "qcom,mdss"; + + reg = <0x00900000 0x1000>, + <0x009b0000 0x1040>, + <0x009b8000 0x1040>; + reg-names = "mdss_phys", + "vbif_phys", + "vbif_nrt_phys"; + + power-domains = <&mmcc MDSS_GDSC>; + interrupts = ; + + interrupt-controller; + #interrupt-cells = <1>; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_MDP_CLK>; + clock-names = "iface", "core"; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + status = "disabled"; + + mdp: mdp@901000 { + compatible = "qcom,mdp5"; + reg = <0x00901000 0x90000>; + reg-names = "mdp_phys"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_MDP_CLK>, + <&mmcc SMMU_MDP_AXI_CLK>, + <&mmcc MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "core", + "iommu", + "vsync"; + + iommus = <&mdp_smmu 0>; + + assigned-clocks = <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_VSYNC_CLK>; + assigned-clock-rates = <300000000>, + <19200000>; + + interconnects = <&mnoc MASTER_MDP_PORT0 &bimc SLAVE_EBI_CH0>, + <&mnoc MASTER_MDP_PORT1 &bimc SLAVE_EBI_CH0>, + <&mnoc MASTER_ROTATOR &bimc SLAVE_EBI_CH0>; + interconnect-names = "mdp0-mem", "mdp1-mem", "rotator-mem"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdp5_intf3_out: endpoint { + remote-endpoint = <&hdmi_in>; + }; + }; + + port@1 { + reg = <1>; + mdp5_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@2 { + reg = <2>; + mdp5_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + }; + + dsi0: dsi@994000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0x00994000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_BYTE0_CLK>, + <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MMSS_MISC_AHB_CLK>, + <&mmcc MDSS_PCLK0_CLK>, + <&mmcc MDSS_ESC0_CLK>; + clock-names = "mdp_core", + "byte", + "iface", + "bus", + "core_mmss", + "pixel", + "core"; + assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + + phys = <&dsi0_phy>; + phy-names = "dsi"; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&mdp5_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + }; + + dsi0_phy: dsi-phy@994400 { + compatible = "qcom,dsi-phy-14nm"; + reg = <0x00994400 0x100>, + <0x00994500 0x300>, + <0x00994800 0x188>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "ref"; + status = "disabled"; + }; + + dsi1: dsi@996000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0x00996000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5>; + + clocks = <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_BYTE1_CLK>, + <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MMSS_MISC_AHB_CLK>, + <&mmcc MDSS_PCLK1_CLK>, + <&mmcc MDSS_ESC1_CLK>; + clock-names = "mdp_core", + "byte", + "iface", + "bus", + "core_mmss", + "pixel", + "core"; + assigned-clocks = <&mmcc BYTE1_CLK_SRC>, <&mmcc PCLK1_CLK_SRC>; + assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>; + + phys = <&dsi1_phy>; + phy-names = "dsi"; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi1_in: endpoint { + remote-endpoint = <&mdp5_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + dsi1_out: endpoint { + }; + }; + }; + }; + + dsi1_phy: dsi-phy@996400 { + compatible = "qcom,dsi-phy-14nm"; + reg = <0x00996400 0x100>, + <0x00996500 0x300>, + <0x00996800 0x188>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "ref"; + status = "disabled"; + }; + + hdmi: hdmi-tx@9a0000 { + compatible = "qcom,hdmi-tx-8996"; + reg = <0x009a0000 0x50c>, + <0x00070000 0x6158>, + <0x009e0000 0xfff>; + reg-names = "core_physical", + "qfprom_physical", + "hdcp_physical"; + + interrupt-parent = <&mdss>; + interrupts = <8>; + + clocks = <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_HDMI_CLK>, + <&mmcc MDSS_HDMI_AHB_CLK>, + <&mmcc MDSS_EXTPCLK_CLK>; + clock-names = + "mdp_core", + "iface", + "core", + "alt_iface", + "extp"; + + phys = <&hdmi_phy>; + #sound-dai-cells = <1>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + hdmi_in: endpoint { + remote-endpoint = <&mdp5_intf3_out>; + }; + }; + }; + }; + + hdmi_phy: hdmi-phy@9a0600 { + #phy-cells = <0>; + compatible = "qcom,hdmi-phy-8996"; + reg = <0x009a0600 0x1c4>, + <0x009a0a00 0x124>, + <0x009a0c00 0x124>, + <0x009a0e00 0x124>, + <0x009a1000 0x124>, + <0x009a1200 0x0c8>; + reg-names = "hdmi_pll", + "hdmi_tx_l0", + "hdmi_tx_l1", + "hdmi_tx_l2", + "hdmi_tx_l3", + "hdmi_phy"; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&gcc GCC_HDMI_CLKREF_CLK>, + <&xo_board>; + clock-names = "iface", + "ref", + "xo"; + + #clock-cells = <0>; + + status = "disabled"; + }; + }; + + gpu: gpu@b00000 { + compatible = "qcom,adreno-530.2", "qcom,adreno"; + + reg = <0x00b00000 0x3f000>; + reg-names = "kgsl_3d0_reg_memory"; + + interrupts = <0 300 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&mmcc GPU_GX_GFX3D_CLK>, + <&mmcc GPU_AHB_CLK>, + <&mmcc GPU_GX_RBBMTIMER_CLK>, + <&gcc GCC_BIMC_GFX_CLK>, + <&gcc GCC_MMSS_BIMC_GFX_CLK>; + + clock-names = "core", + "iface", + "rbbmtimer", + "mem", + "mem_iface"; + + interconnects = <&bimc MASTER_GRAPHICS_3D &bimc SLAVE_EBI_CH0>; + interconnect-names = "gfx-mem"; + + power-domains = <&mmcc GPU_GX_GDSC>; + iommus = <&adreno_smmu 0>; + + nvmem-cells = <&speedbin_efuse>; + nvmem-cell-names = "speed_bin"; + + operating-points-v2 = <&gpu_opp_table>; + + status = "disabled"; + + #cooling-cells = <2>; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + /* + * 624Mhz is only available on speed bins 0 and 3. + * 560Mhz is only available on speed bins 0, 2 and 3. + * All the rest are available on all bins of the hardware. + */ + opp-624000000 { + opp-hz = /bits/ 64 <624000000>; + opp-supported-hw = <0x09>; + }; + opp-560000000 { + opp-hz = /bits/ 64 <560000000>; + opp-supported-hw = <0x0d>; + }; + opp-510000000 { + opp-hz = /bits/ 64 <510000000>; + opp-supported-hw = <0xFF>; + }; + opp-401800000 { + opp-hz = /bits/ 64 <401800000>; + opp-supported-hw = <0xFF>; + }; + opp-315000000 { + opp-hz = /bits/ 64 <315000000>; + opp-supported-hw = <0xFF>; + }; + opp-214000000 { + opp-hz = /bits/ 64 <214000000>; + opp-supported-hw = <0xFF>; + }; + opp-133000000 { + opp-hz = /bits/ 64 <133000000>; + opp-supported-hw = <0xFF>; + }; + }; + + zap-shader { + memory-region = <&gpu_mem>; + }; + }; + + tlmm: pinctrl@1010000 { + compatible = "qcom,msm8996-pinctrl"; + reg = <0x01010000 0x300000>; + interrupts = ; + gpio-controller; + gpio-ranges = <&tlmm 0 0 150>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + blsp1_spi1_default: blsp1-spi1-default { + spi { + pins = "gpio0", "gpio1", "gpio3"; + function = "blsp_spi1"; + drive-strength = <12>; + bias-disable; + }; + + cs { + pins = "gpio2"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + blsp1_spi1_sleep: blsp1-spi1-sleep { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp2_uart2_2pins_default: blsp2-uart1-2pins { + pins = "gpio4", "gpio5"; + function = "blsp_uart8"; + drive-strength = <16>; + bias-disable; + }; + + blsp2_uart2_2pins_sleep: blsp2-uart1-2pins-sleep { + pins = "gpio4", "gpio5"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c2_default: blsp2-i2c2 { + pins = "gpio6", "gpio7"; + function = "blsp_i2c8"; + drive-strength = <16>; + bias-disable; + }; + + blsp2_i2c2_sleep: blsp2-i2c2-sleep { + pins = "gpio6", "gpio7"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + cci0_default: cci0-default { + pins = "gpio17", "gpio18"; + function = "cci_i2c"; + drive-strength = <16>; + bias-disable; + }; + + camera0_state_on: + camera_rear_default: camera-rear-default { + camera0_mclk: mclk0 { + pins = "gpio13"; + function = "cam_mclk"; + drive-strength = <16>; + bias-disable; + }; + + camera0_rst: rst { + pins = "gpio25"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + camera0_pwdn: pwdn { + pins = "gpio26"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + }; + + cci1_default: cci1-default { + pins = "gpio19", "gpio20"; + function = "cci_i2c"; + drive-strength = <16>; + bias-disable; + }; + + camera1_state_on: + camera_board_default: camera-board-default { + mclk1 { + pins = "gpio14"; + function = "cam_mclk"; + drive-strength = <16>; + bias-disable; + }; + + pwdn { + pins = "gpio98"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + rst { + pins = "gpio104"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + }; + + camera2_state_on: + camera_front_default: camera-front-default { + camera2_mclk: mclk2 { + pins = "gpio15"; + function = "cam_mclk"; + drive-strength = <16>; + bias-disable; + }; + + camera2_rst: rst { + pins = "gpio23"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + pwdn { + pins = "gpio133"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + }; + + pcie0_state_on: pcie0-state-on { + perst { + pins = "gpio35"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq { + pins = "gpio36"; + function = "pci_e0"; + drive-strength = <2>; + bias-pull-up; + }; + + wake { + pins = "gpio37"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie0_state_off: pcie0-state-off { + perst { + pins = "gpio35"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq { + pins = "gpio36"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wake { + pins = "gpio37"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + + blsp1_uart2_default: blsp1-uart2-default { + pins = "gpio41", "gpio42", "gpio43", "gpio44"; + function = "blsp_uart2"; + drive-strength = <16>; + bias-disable; + }; + + blsp1_uart2_sleep: blsp1-uart2-sleep { + pins = "gpio41", "gpio42", "gpio43", "gpio44"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c3_default: blsp1-i2c2-default { + pins = "gpio47", "gpio48"; + function = "blsp_i2c3"; + drive-strength = <16>; + bias-disable; + }; + + blsp1_i2c3_sleep: blsp1-i2c2-sleep { + pins = "gpio47", "gpio48"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_uart3_4pins_default: blsp2-uart2-4pins { + pins = "gpio49", "gpio50", "gpio51", "gpio52"; + function = "blsp_uart9"; + drive-strength = <16>; + bias-disable; + }; + + blsp2_uart3_4pins_sleep: blsp2-uart2-4pins-sleep { + pins = "gpio49", "gpio50", "gpio51", "gpio52"; + function = "blsp_uart9"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c3_default: blsp2-i2c3 { + pins = "gpio51", "gpio52"; + function = "blsp_i2c9"; + drive-strength = <16>; + bias-disable; + }; + + blsp2_i2c3_sleep: blsp2-i2c3-sleep { + pins = "gpio51", "gpio52"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wcd_intr_default: wcd-intr-default{ + pins = "gpio54"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + input-enable; + }; + + blsp2_i2c1_default: blsp2-i2c1 { + pins = "gpio55", "gpio56"; + function = "blsp_i2c7"; + drive-strength = <16>; + bias-disable; + }; + + blsp2_i2c1_sleep: blsp2-i2c0-sleep { + pins = "gpio55", "gpio56"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c5_default: blsp2-i2c5 { + pins = "gpio60", "gpio61"; + function = "blsp_i2c11"; + drive-strength = <2>; + bias-disable; + }; + + /* Sleep state for BLSP2_I2C5 is missing.. */ + + cdc_reset_active: cdc-reset-active { + pins = "gpio64"; + function = "gpio"; + drive-strength = <16>; + bias-pull-down; + output-high; + }; + + cdc_reset_sleep: cdc-reset-sleep { + pins = "gpio64"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; + + blsp2_spi6_default: blsp2-spi5-default { + spi { + pins = "gpio85", "gpio86", "gpio88"; + function = "blsp_spi12"; + drive-strength = <12>; + bias-disable; + }; + + cs { + pins = "gpio87"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + blsp2_spi6_sleep: blsp2-spi5-sleep { + pins = "gpio85", "gpio86", "gpio87", "gpio88"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp2_i2c6_default: blsp2-i2c6 { + pins = "gpio87", "gpio88"; + function = "blsp_i2c12"; + drive-strength = <16>; + bias-disable; + }; + + blsp2_i2c6_sleep: blsp2-i2c6-sleep { + pins = "gpio87", "gpio88"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + pcie1_state_on: pcie1-state-on { + perst { + pins = "gpio130"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq { + pins = "gpio131"; + function = "pci_e1"; + drive-strength = <2>; + bias-pull-up; + }; + + wake { + pins = "gpio132"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + pcie1_state_off: pcie1-state-off { + /* Perst is missing? */ + clkreq { + pins = "gpio131"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wake { + pins = "gpio132"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + + pcie2_state_on: pcie2-state-on { + perst { + pins = "gpio114"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq { + pins = "gpio115"; + function = "pci_e2"; + drive-strength = <2>; + bias-pull-up; + }; + + wake { + pins = "gpio116"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + pcie2_state_off: pcie2-state-off { + /* Perst is missing? */ + clkreq { + pins = "gpio115"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wake { + pins = "gpio116"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + + sdc1_state_on: sdc1-state-on { + clk { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <10>; + }; + + rclk { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc1_state_off: sdc1-state-off { + clk { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + + rclk { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc2_state_on: sdc2-clk-on { + clk { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + }; + + sdc2_state_off: sdc2-clk-off { + clk { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + }; + }; + + sram@290000 { + compatible = "qcom,rpm-stats"; + reg = <0x00290000 0x10000>; + }; + + spmi_bus: spmi@400f000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0400f000 0x1000>, + <0x04400000 0x800000>, + <0x04c00000 0x800000>, + <0x05800000 0x200000>, + <0x0400a000 0x002100>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = ; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + agnoc@0 { + power-domains = <&gcc AGGRE0_NOC_GDSC>; + compatible = "simple-pm-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pcie0: pcie@600000 { + compatible = "qcom,pcie-msm8996"; + status = "disabled"; + power-domains = <&gcc PCIE0_GDSC>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + + reg = <0x00600000 0x2000>, + <0x0c000000 0xf1d>, + <0x0c000f20 0xa8>, + <0x0c100000 0x100000>; + reg-names = "parf", "dbi", "elbi","config"; + + phys = <&pciephy_0>; + phy-names = "pciephy"; + + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x00000000 0x0c200000 0x0 0x100000>, + <0x02000000 0x0 0x0c300000 0x0c300000 0x0 0xd00000>; + + device_type = "pci"; + + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pcie0_state_on>; + pinctrl-1 = <&pcie0_state_off>; + + linux,pci-domain = <0>; + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>; + + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave"; + + }; + + pcie1: pcie@608000 { + compatible = "qcom,pcie-msm8996"; + power-domains = <&gcc PCIE1_GDSC>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + + status = "disabled"; + + reg = <0x00608000 0x2000>, + <0x0d000000 0xf1d>, + <0x0d000f20 0xa8>, + <0x0d100000 0x100000>; + + reg-names = "parf", "dbi", "elbi","config"; + + phys = <&pciephy_1>; + phy-names = "pciephy"; + + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x00000000 0x0d200000 0x0 0x100000>, + <0x02000000 0x0 0x0d300000 0x0d300000 0x0 0xd00000>; + + device_type = "pci"; + + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 272 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 273 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 274 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 275 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pcie1_state_on>; + pinctrl-1 = <&pcie1_state_off>; + + linux,pci-domain = <1>; + + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, + <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_AXI_CLK>; + + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave"; + }; + + pcie2: pcie@610000 { + compatible = "qcom,pcie-msm8996"; + power-domains = <&gcc PCIE2_GDSC>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + status = "disabled"; + reg = <0x00610000 0x2000>, + <0x0e000000 0xf1d>, + <0x0e000f20 0xa8>, + <0x0e100000 0x100000>; + + reg-names = "parf", "dbi", "elbi","config"; + + phys = <&pciephy_2>; + phy-names = "pciephy"; + + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x00000000 0x0e200000 0x0 0x100000>, + <0x02000000 0x0 0x0e300000 0x0e300000 0x0 0x1d00000>; + + device_type = "pci"; + + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pcie2_state_on>; + pinctrl-1 = <&pcie2_state_off>; + + linux,pci-domain = <2>; + clocks = <&gcc GCC_PCIE_2_PIPE_CLK>, + <&gcc GCC_PCIE_2_AUX_CLK>, + <&gcc GCC_PCIE_2_CFG_AHB_CLK>, + <&gcc GCC_PCIE_2_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_2_SLV_AXI_CLK>; + + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave"; + }; + }; + + ufshc: ufshc@624000 { + compatible = "qcom,msm8996-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0x00624000 0x2500>; + interrupts = ; + + phys = <&ufsphy_lane>; + phy-names = "ufsphy"; + + power-domains = <&gcc UFS_GDSC>; + + clock-names = + "core_clk_src", + "core_clk", + "bus_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro_src", + "core_clk_unipro", + "core_clk_ice", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk"; + clocks = + <&gcc UFS_AXI_CLK_SRC>, + <&gcc GCC_UFS_AXI_CLK>, + <&gcc GCC_SYS_NOC_UFS_AXI_CLK>, + <&gcc GCC_AGGRE2_UFS_AXI_CLK>, + <&gcc GCC_UFS_AHB_CLK>, + <&gcc UFS_ICE_CORE_CLK_SRC>, + <&gcc GCC_UFS_UNIPRO_CORE_CLK>, + <&gcc GCC_UFS_ICE_CORE_CLK>, + <&rpmcc RPM_SMD_LN_BB_CLK>, + <&gcc GCC_UFS_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_RX_SYMBOL_0_CLK>; + freq-table-hz = + <100000000 200000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>, + <150000000 300000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>, + <0 0>; + + lanes-per-direction = <1>; + #reset-cells = <1>; + status = "disabled"; + + ufs_variant { + compatible = "qcom,ufs_variant"; + }; + }; + + ufsphy: phy@627000 { + compatible = "qcom,msm8996-qmp-ufs-phy"; + reg = <0x00627000 0x1c4>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_UFS_CLKREF_CLK>; + clock-names = "ref"; + + resets = <&ufshc 0>; + reset-names = "ufsphy"; + status = "disabled"; + + ufsphy_lane: phy@627400 { + reg = <0x627400 0x12c>, + <0x627600 0x200>, + <0x627c00 0x1b4>; + #phy-cells = <0>; + }; + }; + + camss: camss@a34000 { + compatible = "qcom,msm8996-camss"; + reg = <0x00a34000 0x1000>, + <0x00a00030 0x4>, + <0x00a35000 0x1000>, + <0x00a00038 0x4>, + <0x00a36000 0x1000>, + <0x00a00040 0x4>, + <0x00a30000 0x100>, + <0x00a30400 0x100>, + <0x00a30800 0x100>, + <0x00a30c00 0x100>, + <0x00a31000 0x500>, + <0x00a00020 0x10>, + <0x00a10000 0x1000>, + <0x00a14000 0x1000>; + reg-names = "csiphy0", + "csiphy0_clk_mux", + "csiphy1", + "csiphy1_clk_mux", + "csiphy2", + "csiphy2_clk_mux", + "csid0", + "csid1", + "csid2", + "csid3", + "ispif", + "csi_clk_mux", + "vfe0", + "vfe1"; + interrupts = , + , + , + , + , + , + , + , + , + ; + interrupt-names = "csiphy0", + "csiphy1", + "csiphy2", + "csid0", + "csid1", + "csid2", + "csid3", + "ispif", + "vfe0", + "vfe1"; + power-domains = <&mmcc VFE0_GDSC>, + <&mmcc VFE1_GDSC>; + clocks = <&mmcc CAMSS_TOP_AHB_CLK>, + <&mmcc CAMSS_ISPIF_AHB_CLK>, + <&mmcc CAMSS_CSI0PHYTIMER_CLK>, + <&mmcc CAMSS_CSI1PHYTIMER_CLK>, + <&mmcc CAMSS_CSI2PHYTIMER_CLK>, + <&mmcc CAMSS_CSI0_AHB_CLK>, + <&mmcc CAMSS_CSI0_CLK>, + <&mmcc CAMSS_CSI0PHY_CLK>, + <&mmcc CAMSS_CSI0PIX_CLK>, + <&mmcc CAMSS_CSI0RDI_CLK>, + <&mmcc CAMSS_CSI1_AHB_CLK>, + <&mmcc CAMSS_CSI1_CLK>, + <&mmcc CAMSS_CSI1PHY_CLK>, + <&mmcc CAMSS_CSI1PIX_CLK>, + <&mmcc CAMSS_CSI1RDI_CLK>, + <&mmcc CAMSS_CSI2_AHB_CLK>, + <&mmcc CAMSS_CSI2_CLK>, + <&mmcc CAMSS_CSI2PHY_CLK>, + <&mmcc CAMSS_CSI2PIX_CLK>, + <&mmcc CAMSS_CSI2RDI_CLK>, + <&mmcc CAMSS_CSI3_AHB_CLK>, + <&mmcc CAMSS_CSI3_CLK>, + <&mmcc CAMSS_CSI3PHY_CLK>, + <&mmcc CAMSS_CSI3PIX_CLK>, + <&mmcc CAMSS_CSI3RDI_CLK>, + <&mmcc CAMSS_AHB_CLK>, + <&mmcc CAMSS_VFE0_CLK>, + <&mmcc CAMSS_CSI_VFE0_CLK>, + <&mmcc CAMSS_VFE0_AHB_CLK>, + <&mmcc CAMSS_VFE0_STREAM_CLK>, + <&mmcc CAMSS_VFE1_CLK>, + <&mmcc CAMSS_CSI_VFE1_CLK>, + <&mmcc CAMSS_VFE1_AHB_CLK>, + <&mmcc CAMSS_VFE1_STREAM_CLK>, + <&mmcc CAMSS_VFE_AHB_CLK>, + <&mmcc CAMSS_VFE_AXI_CLK>; + clock-names = "top_ahb", + "ispif_ahb", + "csiphy0_timer", + "csiphy1_timer", + "csiphy2_timer", + "csi0_ahb", + "csi0", + "csi0_phy", + "csi0_pix", + "csi0_rdi", + "csi1_ahb", + "csi1", + "csi1_phy", + "csi1_pix", + "csi1_rdi", + "csi2_ahb", + "csi2", + "csi2_phy", + "csi2_pix", + "csi2_rdi", + "csi3_ahb", + "csi3", + "csi3_phy", + "csi3_pix", + "csi3_rdi", + "ahb", + "vfe0", + "csi_vfe0", + "vfe0_ahb", + "vfe0_stream", + "vfe1", + "csi_vfe1", + "vfe1_ahb", + "vfe1_stream", + "vfe_ahb", + "vfe_axi"; + iommus = <&vfe_smmu 0>, + <&vfe_smmu 1>, + <&vfe_smmu 2>, + <&vfe_smmu 3>; + status = "disabled"; + ports { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + cci: cci@a0c000 { + compatible = "qcom,msm8996-cci"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xa0c000 0x1000>; + interrupts = ; + power-domains = <&mmcc CAMSS_GDSC>; + clocks = <&mmcc CAMSS_TOP_AHB_CLK>, + <&mmcc CAMSS_CCI_AHB_CLK>, + <&mmcc CAMSS_CCI_CLK>, + <&mmcc CAMSS_AHB_CLK>; + clock-names = "camss_top_ahb", + "cci_ahb", + "cci", + "camss_ahb"; + assigned-clocks = <&mmcc CAMSS_CCI_AHB_CLK>, + <&mmcc CAMSS_CCI_CLK>; + assigned-clock-rates = <80000000>, <37500000>; + pinctrl-names = "default"; + pinctrl-0 = <&cci0_default &cci1_default>; + status = "disabled"; + + cci_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <400000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <400000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + adreno_smmu: iommu@b40000 { + compatible = "qcom,msm8996-smmu-v2", "qcom,adreno-smmu", "qcom,smmu-v2"; + reg = <0x00b40000 0x10000>; + + #global-interrupts = <1>; + interrupts = , + , + ; + #iommu-cells = <1>; + + clocks = <&mmcc GPU_AHB_CLK>, + <&gcc GCC_MMSS_BIMC_GFX_CLK>; + clock-names = "iface", "bus"; + + power-domains = <&mmcc GPU_GDSC>; + }; + + venus: video-codec@c00000 { + compatible = "qcom,msm8996-venus"; + reg = <0x00c00000 0xff000>; + interrupts = ; + power-domains = <&mmcc VENUS_GDSC>; + clocks = <&mmcc VIDEO_CORE_CLK>, + <&mmcc VIDEO_AHB_CLK>, + <&mmcc VIDEO_AXI_CLK>, + <&mmcc VIDEO_MAXI_CLK>; + clock-names = "core", "iface", "bus", "mbus"; + interconnects = <&mnoc MASTER_VIDEO_P0 &bimc SLAVE_EBI_CH0>, + <&bimc MASTER_AMPSS_M0 &mnoc SLAVE_VENUS_CFG>; + interconnect-names = "video-mem", "cpu-cfg"; + iommus = <&venus_smmu 0x00>, + <&venus_smmu 0x01>, + <&venus_smmu 0x0a>, + <&venus_smmu 0x07>, + <&venus_smmu 0x0e>, + <&venus_smmu 0x0f>, + <&venus_smmu 0x08>, + <&venus_smmu 0x09>, + <&venus_smmu 0x0b>, + <&venus_smmu 0x0c>, + <&venus_smmu 0x0d>, + <&venus_smmu 0x10>, + <&venus_smmu 0x11>, + <&venus_smmu 0x21>, + <&venus_smmu 0x28>, + <&venus_smmu 0x29>, + <&venus_smmu 0x2b>, + <&venus_smmu 0x2c>, + <&venus_smmu 0x2d>, + <&venus_smmu 0x31>; + memory-region = <&venus_mem>; + status = "disabled"; + + video-decoder { + compatible = "venus-decoder"; + clocks = <&mmcc VIDEO_SUBCORE0_CLK>; + clock-names = "core"; + power-domains = <&mmcc VENUS_CORE0_GDSC>; + }; + + video-encoder { + compatible = "venus-encoder"; + clocks = <&mmcc VIDEO_SUBCORE1_CLK>; + clock-names = "core"; + power-domains = <&mmcc VENUS_CORE1_GDSC>; + }; + }; + + mdp_smmu: iommu@d00000 { + compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; + reg = <0x00d00000 0x10000>; + + #global-interrupts = <1>; + interrupts = , + , + ; + #iommu-cells = <1>; + clocks = <&mmcc SMMU_MDP_AHB_CLK>, + <&mmcc SMMU_MDP_AXI_CLK>; + clock-names = "iface", "bus"; + + power-domains = <&mmcc MDSS_GDSC>; + }; + + venus_smmu: iommu@d40000 { + compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; + reg = <0x00d40000 0x20000>; + #global-interrupts = <1>; + interrupts = , + , + , + , + , + , + , + ; + power-domains = <&mmcc MMAGIC_VIDEO_GDSC>; + clocks = <&mmcc SMMU_VIDEO_AHB_CLK>, + <&mmcc SMMU_VIDEO_AXI_CLK>; + clock-names = "iface", "bus"; + #iommu-cells = <1>; + status = "okay"; + }; + + vfe_smmu: iommu@da0000 { + compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; + reg = <0x00da0000 0x10000>; + + #global-interrupts = <1>; + interrupts = , + , + ; + power-domains = <&mmcc MMAGIC_CAMSS_GDSC>; + clocks = <&mmcc SMMU_VFE_AHB_CLK>, + <&mmcc SMMU_VFE_AXI_CLK>; + clock-names = "iface", + "bus"; + #iommu-cells = <1>; + }; + + lpass_q6_smmu: iommu@1600000 { + compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; + reg = <0x01600000 0x20000>; + #iommu-cells = <1>; + power-domains = <&gcc HLOS1_VOTE_LPASS_CORE_GDSC>; + + #global-interrupts = <1>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + ; + + clocks = <&gcc GCC_HLOS1_VOTE_LPASS_CORE_SMMU_CLK>, + <&gcc GCC_HLOS1_VOTE_LPASS_ADSP_SMMU_CLK>; + clock-names = "iface", "bus"; + }; + + slpi_pil: remoteproc@1c00000 { + compatible = "qcom,msm8996-slpi-pil"; + reg = <0x01c00000 0x4000>; + + interrupts-extended = <&intc 0 390 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + clocks = <&xo_board>, + <&rpmcc RPM_SMD_AGGR2_NOC_CLK>; + clock-names = "xo", "aggre2"; + + memory-region = <&slpi_mem>; + + qcom,smem-states = <&slpi_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + power-domains = <&rpmpd MSM8996_VDDSSCX>; + power-domain-names = "ssc_cx"; + + status = "disabled"; + + smd-edge { + interrupts = ; + + label = "dsps"; + mboxes = <&apcs_glb 25>; + qcom,smd-edge = <3>; + qcom,remote-pid = <3>; + }; + }; + + mss_pil: remoteproc@2080000 { + compatible = "qcom,msm8996-mss-pil"; + reg = <0x2080000 0x100>, + <0x2180000 0x020>; + reg-names = "qdsp6", "rmb"; + + interrupts-extended = <&intc 0 448 IRQ_TYPE_EDGE_RISING>, + <&mpss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&mpss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&mpss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&mpss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&mpss_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack", + "shutdown-ack"; + + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, + <&gcc GCC_BOOT_ROM_AHB_CLK>, + <&xo_board>, + <&gcc GCC_MSS_GPLL0_DIV_CLK>, + <&gcc GCC_MSS_SNOC_AXI_CLK>, + <&gcc GCC_MSS_MNOC_BIMC_AXI_CLK>, + <&rpmcc RPM_SMD_PCNOC_CLK>, + <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "iface", "bus", "mem", "xo", "gpll0_mss", + "snoc_axi", "mnoc_axi", "pnoc", "qdss"; + + resets = <&gcc GCC_MSS_RESTART>; + reset-names = "mss_restart"; + + power-domains = <&rpmpd MSM8996_VDDCX>, + <&rpmpd MSM8996_VDDMX>; + power-domain-names = "cx", "mx"; + + qcom,smem-states = <&mpss_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + qcom,halt-regs = <&tcsr_1 0x3000 0x5000 0x4000>; + + status = "disabled"; + + mba { + memory-region = <&mba_mem>; + }; + + mpss { + memory-region = <&mpss_mem>; + }; + + smd-edge { + interrupts = ; + + label = "mpss"; + mboxes = <&apcs_glb 12>; + qcom,smd-edge = <0>; + qcom,remote-pid = <1>; + }; + }; + + stm@3002000 { + compatible = "arm,coresight-stm", "arm,primecell"; + reg = <0x3002000 0x1000>, + <0x8280000 0x180000>; + reg-names = "stm-base", "stm-stimulus-base"; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + out-ports { + port { + stm_out: endpoint { + remote-endpoint = + <&funnel0_in>; + }; + }; + }; + }; + + tpiu@3020000 { + compatible = "arm,coresight-tpiu", "arm,primecell"; + reg = <0x3020000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + in-ports { + port { + tpiu_in: endpoint { + remote-endpoint = + <&replicator_out1>; + }; + }; + }; + }; + + funnel@3021000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x3021000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@7 { + reg = <7>; + funnel0_in: endpoint { + remote-endpoint = + <&stm_out>; + }; + }; + }; + + out-ports { + port { + funnel0_out: endpoint { + remote-endpoint = + <&merge_funnel_in0>; + }; + }; + }; + }; + + funnel@3022000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x3022000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@6 { + reg = <6>; + funnel1_in: endpoint { + remote-endpoint = + <&apss_merge_funnel_out>; + }; + }; + }; + + out-ports { + port { + funnel1_out: endpoint { + remote-endpoint = + <&merge_funnel_in1>; + }; + }; + }; + }; + + funnel@3023000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x3023000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + + out-ports { + port { + funnel2_out: endpoint { + remote-endpoint = + <&merge_funnel_in2>; + }; + }; + }; + }; + + funnel@3025000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x3025000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + merge_funnel_in0: endpoint { + remote-endpoint = + <&funnel0_out>; + }; + }; + + port@1 { + reg = <1>; + merge_funnel_in1: endpoint { + remote-endpoint = + <&funnel1_out>; + }; + }; + + port@2 { + reg = <2>; + merge_funnel_in2: endpoint { + remote-endpoint = + <&funnel2_out>; + }; + }; + }; + + out-ports { + port { + merge_funnel_out: endpoint { + remote-endpoint = + <&etf_in>; + }; + }; + }; + }; + + replicator@3026000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0x3026000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + in-ports { + port { + replicator_in: endpoint { + remote-endpoint = + <&etf_out>; + }; + }; + }; + + out-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + replicator_out0: endpoint { + remote-endpoint = + <&etr_in>; + }; + }; + + port@1 { + reg = <1>; + replicator_out1: endpoint { + remote-endpoint = + <&tpiu_in>; + }; + }; + }; + }; + + etf@3027000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x3027000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + in-ports { + port { + etf_in: endpoint { + remote-endpoint = + <&merge_funnel_out>; + }; + }; + }; + + out-ports { + port { + etf_out: endpoint { + remote-endpoint = + <&replicator_in>; + }; + }; + }; + }; + + etr@3028000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x3028000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + arm,scatter-gather; + + in-ports { + port { + etr_in: endpoint { + remote-endpoint = + <&replicator_out0>; + }; + }; + }; + }; + + debug@3810000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x3810000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU0>; + }; + + etm@3840000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x3840000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU0>; + + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = + <&apss_funnel0_in0>; + }; + }; + }; + }; + + debug@3910000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x3910000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU1>; + }; + + etm@3940000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x3940000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU1>; + + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = + <&apss_funnel0_in1>; + }; + }; + }; + }; + + funnel@39b0000 { /* APSS Funnel 0 */ + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x39b0000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + apss_funnel0_in0: endpoint { + remote-endpoint = <&etm0_out>; + }; + }; + + port@1 { + reg = <1>; + apss_funnel0_in1: endpoint { + remote-endpoint = <&etm1_out>; + }; + }; + }; + + out-ports { + port { + apss_funnel0_out: endpoint { + remote-endpoint = + <&apss_merge_funnel_in0>; + }; + }; + }; + }; + + debug@3a10000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x3a10000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU2>; + }; + + etm@3a40000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x3a40000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU2>; + + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = + <&apss_funnel1_in0>; + }; + }; + }; + }; + + debug@3b10000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x3b10000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU3>; + }; + + etm@3b40000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x3b40000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU3>; + + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = + <&apss_funnel1_in1>; + }; + }; + }; + }; + + funnel@3bb0000 { /* APSS Funnel 1 */ + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x3bb0000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + apss_funnel1_in0: endpoint { + remote-endpoint = <&etm2_out>; + }; + }; + + port@1 { + reg = <1>; + apss_funnel1_in1: endpoint { + remote-endpoint = <&etm3_out>; + }; + }; + }; + + out-ports { + port { + apss_funnel1_out: endpoint { + remote-endpoint = + <&apss_merge_funnel_in1>; + }; + }; + }; + }; + + funnel@3bc0000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x3bc0000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + apss_merge_funnel_in0: endpoint { + remote-endpoint = + <&apss_funnel0_out>; + }; + }; + + port@1 { + reg = <1>; + apss_merge_funnel_in1: endpoint { + remote-endpoint = + <&apss_funnel1_out>; + }; + }; + }; + + out-ports { + port { + apss_merge_funnel_out: endpoint { + remote-endpoint = + <&funnel1_in>; + }; + }; + }; + }; + + kryocc: clock-controller@6400000 { + compatible = "qcom,msm8996-apcc"; + reg = <0x06400000 0x90000>; + + clock-names = "xo", "sys_apcs_aux"; + clocks = <&rpmcc RPM_SMD_XO_A_CLK_SRC>, <&apcs_glb>; + + #clock-cells = <1>; + }; + + usb3: usb@6af8800 { + compatible = "qcom,msm8996-dwc3", "qcom,dwc3"; + reg = <0x06af8800 0x400>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + interrupts = , + ; + interrupt-names = "hs_phy_irq", "ss_phy_irq"; + + clocks = <&gcc GCC_SYS_NOC_USB3_AXI_CLK>, + <&gcc GCC_USB30_MASTER_CLK>, + <&gcc GCC_AGGRE2_USB3_AXI_CLK>, + <&gcc GCC_USB30_SLEEP_CLK>, + <&gcc GCC_USB30_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_MASTER_CLK>; + assigned-clock-rates = <19200000>, <120000000>; + + interconnects = <&a2noc MASTER_USB3 &bimc SLAVE_EBI_CH0>, + <&bimc MASTER_AMPSS_M0 &snoc SLAVE_USB3>; + interconnect-names = "usb-ddr", "apps-usb"; + + power-domains = <&gcc USB30_GDSC>; + status = "disabled"; + + usb3_dwc3: usb@6a00000 { + compatible = "snps,dwc3"; + reg = <0x06a00000 0xcc00>; + interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>; + phys = <&hsusb_phy1>, <&ssusb_phy_0>; + phy-names = "usb2-phy", "usb3-phy"; + snps,hird-threshold = /bits/ 8 <0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,is-utmi-l1-suspend; + tx-fifo-resize; + }; + }; + + usb3phy: phy@7410000 { + compatible = "qcom,msm8996-qmp-usb3-phy"; + reg = <0x07410000 0x1c4>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_USB3_PHY_AUX_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_USB3_CLKREF_CLK>; + clock-names = "aux", "cfg_ahb", "ref"; + + resets = <&gcc GCC_USB3_PHY_BCR>, + <&gcc GCC_USB3PHY_PHY_BCR>; + reset-names = "phy", "common"; + status = "disabled"; + + ssusb_phy_0: phy@7410200 { + reg = <0x07410200 0x200>, + <0x07410400 0x130>, + <0x07410600 0x1a8>; + #phy-cells = <0>; + + #clock-cells = <0>; + clock-output-names = "usb3_phy_pipe_clk_src"; + clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>; + clock-names = "pipe0"; + }; + }; + + hsusb_phy1: phy@7411000 { + compatible = "qcom,msm8996-qusb2-phy"; + reg = <0x07411000 0x180>; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_RX1_USB2_CLKREF_CLK>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + nvmem-cells = <&qusb2p_hstx_trim>; + status = "disabled"; + }; + + hsusb_phy2: phy@7412000 { + compatible = "qcom,msm8996-qusb2-phy"; + reg = <0x07412000 0x180>; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_RX2_USB2_CLKREF_CLK>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; + nvmem-cells = <&qusb2s_hstx_trim>; + status = "disabled"; + }; + + sdhc1: mmc@7464900 { + compatible = "qcom,msm8996-sdhci", "qcom,sdhci-msm-v4"; + reg = <0x07464900 0x11c>, <0x07464000 0x800>; + reg-names = "hc", "core"; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + clock-names = "iface", "core", "xo"; + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + resets = <&gcc GCC_SDCC1_BCR>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_state_on>; + pinctrl-1 = <&sdc1_state_off>; + + bus-width = <8>; + non-removable; + status = "disabled"; + }; + + sdhc2: mmc@74a4900 { + compatible = "qcom,msm8996-sdhci", "qcom,sdhci-msm-v4"; + reg = <0x074a4900 0x314>, <0x074a4000 0x800>; + reg-names = "hc", "core"; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + clock-names = "iface", "core", "xo"; + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + resets = <&gcc GCC_SDCC2_BCR>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_state_on>; + pinctrl-1 = <&sdc2_state_off>; + + bus-width = <4>; + status = "disabled"; + }; + + blsp1_dma: dma-controller@7544000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07544000 0x2b000>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + qcom,controlled-remotely; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + blsp1_uart2: serial@7570000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x07570000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_uart2_default>; + pinctrl-1 = <&blsp1_uart2_sleep>; + dmas = <&blsp1_dma 2>, <&blsp1_dma 3>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + blsp1_spi1: spi@7575000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x07575000 0x600>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_spi1_default>; + pinctrl-1 = <&blsp1_spi1_sleep>; + dmas = <&blsp1_dma 12>, <&blsp1_dma 13>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp1_i2c3: i2c@7577000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x07577000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c3_default>; + pinctrl-1 = <&blsp1_i2c3_sleep>; + dmas = <&blsp1_dma 16>, <&blsp1_dma 17>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp2_dma: dma-controller@7584000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07584000 0x2b000>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "bam_clk"; + qcom,controlled-remotely; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + blsp2_uart2: serial@75b0000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x075b0000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + blsp2_uart3: serial@75b1000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x075b1000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_UART3_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + blsp2_i2c1: i2c@75b5000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x075b5000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c1_default>; + pinctrl-1 = <&blsp2_i2c1_sleep>; + dmas = <&blsp2_dma 12>, <&blsp2_dma 13>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp2_i2c2: i2c@75b6000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x075b6000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c2_default>; + pinctrl-1 = <&blsp2_i2c2_sleep>; + dmas = <&blsp2_dma 14>, <&blsp2_dma 15>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp2_i2c3: i2c@75b7000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x075b7000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c3_default>; + pinctrl-1 = <&blsp2_i2c3_sleep>; + dmas = <&blsp2_dma 16>, <&blsp2_dma 17>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp2_i2c5: i2c@75b9000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x75b9000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp2_i2c5_default>; + dmas = <&blsp2_dma 20>, <&blsp2_dma 21>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp2_i2c6: i2c@75ba000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x75ba000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c6_default>; + pinctrl-1 = <&blsp2_i2c6_sleep>; + dmas = <&blsp2_dma 22>, <&blsp2_dma 23>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp2_spi6: spi@75ba000{ + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x075ba000 0x600>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_QUP6_SPI_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_spi6_default>; + pinctrl-1 = <&blsp2_spi6_sleep>; + dmas = <&blsp2_dma 22>, <&blsp2_dma 23>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + usb2: usb@76f8800 { + compatible = "qcom,msm8996-dwc3", "qcom,dwc3"; + reg = <0x076f8800 0x400>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + interrupts = ; + interrupt-names = "hs_phy_irq"; + + clocks = <&gcc GCC_PERIPH_NOC_USB20_AHB_CLK>, + <&gcc GCC_USB20_MASTER_CLK>, + <&gcc GCC_USB20_MOCK_UTMI_CLK>, + <&gcc GCC_USB20_SLEEP_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>, + <&gcc GCC_USB20_MASTER_CLK>; + assigned-clock-rates = <19200000>, <60000000>; + + power-domains = <&gcc USB30_GDSC>; + qcom,select-utmi-as-pipe-clk; + status = "disabled"; + + usb2_dwc3: usb@7600000 { + compatible = "snps,dwc3"; + reg = <0x07600000 0xcc00>; + interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>; + phys = <&hsusb_phy2>; + phy-names = "usb2-phy"; + maximum-speed = "high-speed"; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + }; + }; + + slimbam: dma-controller@9184000 { + compatible = "qcom,bam-v1.7.0"; + qcom,controlled-remotely; + reg = <0x09184000 0x32000>; + num-channels = <31>; + interrupts = <0 164 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + qcom,ee = <1>; + qcom,num-ees = <2>; + }; + + slim_msm: slim@91c0000 { + compatible = "qcom,slim-ngd-v1.5.0"; + reg = <0x091c0000 0x2C000>; + reg-names = "ctrl"; + interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&slimbam 3>, <&slimbam 4>, + <&slimbam 5>, <&slimbam 6>; + dma-names = "rx", "tx", "tx2", "rx2"; + #address-cells = <1>; + #size-cells = <0>; + ngd@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <1>; + + tasha_ifd: tas-ifd { + compatible = "slim217,1a0"; + reg = <0 0>; + }; + + wcd9335: codec@1{ + pinctrl-0 = <&cdc_reset_active &wcd_intr_default>; + pinctrl-names = "default"; + + compatible = "slim217,1a0"; + reg = <1 0>; + + interrupt-parent = <&tlmm>; + interrupts = <54 IRQ_TYPE_LEVEL_HIGH>, + <53 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "intr1", "intr2"; + interrupt-controller; + #interrupt-cells = <1>; + reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; + + slim-ifc-dev = <&tasha_ifd>; + + #sound-dai-cells = <1>; + }; + }; + }; + + adsp_pil: remoteproc@9300000 { + compatible = "qcom,msm8996-adsp-pil"; + reg = <0x09300000 0x80000>; + + interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "xo"; + + memory-region = <&adsp_mem>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + power-domains = <&rpmpd MSM8996_VDDCX>; + power-domain-names = "cx"; + + status = "disabled"; + + smd-edge { + interrupts = ; + + label = "lpass"; + mboxes = <&apcs_glb 8>; + qcom,smd-edge = <1>; + qcom,remote-pid = <2>; + #address-cells = <1>; + #size-cells = <0>; + apr { + power-domains = <&gcc HLOS1_VOTE_LPASS_ADSP_GDSC>; + compatible = "qcom,apr-v2"; + qcom,smd-channels = "apr_audio_svc"; + qcom,domain = ; + #address-cells = <1>; + #size-cells = <0>; + + q6core { + reg = ; + compatible = "qcom,q6core"; + }; + + q6afe: q6afe { + compatible = "qcom,q6afe"; + reg = ; + q6afedai: dais { + compatible = "qcom,q6afe-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + hdmi@1 { + reg = <1>; + }; + }; + }; + + q6asm: q6asm { + compatible = "qcom,q6asm"; + reg = ; + q6asmdai: dais { + compatible = "qcom,q6asm-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + iommus = <&lpass_q6_smmu 1>; + }; + }; + + q6adm: q6adm { + compatible = "qcom,q6adm"; + reg = ; + q6routing: routing { + compatible = "qcom,q6adm-routing"; + #sound-dai-cells = <0>; + }; + }; + }; + + }; + }; + + apcs_glb: mailbox@9820000 { + compatible = "qcom,msm8996-apcs-hmss-global"; + reg = <0x09820000 0x1000>; + + #mbox-cells = <1>; + }; + + timer@9840000 { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0x09840000 0x1000>; + clock-frequency = <19200000>; + + frame@9850000 { + frame-number = <0>; + interrupts = , + ; + reg = <0x09850000 0x1000>, + <0x09860000 0x1000>; + }; + + frame@9870000 { + frame-number = <1>; + interrupts = ; + reg = <0x09870000 0x1000>; + status = "disabled"; + }; + + frame@9880000 { + frame-number = <2>; + interrupts = ; + reg = <0x09880000 0x1000>; + status = "disabled"; + }; + + frame@9890000 { + frame-number = <3>; + interrupts = ; + reg = <0x09890000 0x1000>; + status = "disabled"; + }; + + frame@98a0000 { + frame-number = <4>; + interrupts = ; + reg = <0x098a0000 0x1000>; + status = "disabled"; + }; + + frame@98b0000 { + frame-number = <5>; + interrupts = ; + reg = <0x098b0000 0x1000>; + status = "disabled"; + }; + + frame@98c0000 { + frame-number = <6>; + interrupts = ; + reg = <0x098c0000 0x1000>; + status = "disabled"; + }; + }; + + saw3: syscon@9a10000 { + compatible = "syscon"; + reg = <0x09a10000 0x1000>; + }; + + intc: interrupt-controller@9bc0000 { + compatible = "qcom,msm8996-gic-v3", "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-controller; + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x40000>; + reg = <0x09bc0000 0x10000>, + <0x09c00000 0x100000>; + interrupts = ; + }; + }; + + sound: sound { + }; + + thermal-zones { + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 3>; + + trips { + cpu0_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_crit: cpu_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 5>; + + trips { + cpu1_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_crit: cpu_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 8>; + + trips { + cpu2_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_crit: cpu_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 10>; + + trips { + cpu3_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_crit: cpu_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + gpu-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 6>; + + trips { + gpu1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + map0 { + trip = <&gpu1_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + gpu-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 7>; + + trips { + gpu2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + map0 { + trip = <&gpu2_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + m4m-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 1>; + + trips { + m4m_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + l3-or-venus-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 2>; + + trips { + l3_or_venus_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + cluster0-l2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 7>; + + trips { + cluster0_l2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + cluster1-l2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 12>; + + trips { + cluster1_l2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + camera-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 1>; + + trips { + camera_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + q6-dsp-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 2>; + + trips { + q6_dsp_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + mem-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 3>; + + trips { + mem_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + modemtx-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 4>; + + trips { + modemtx_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8996pro.dtsi b/arch/arm64/boot/dts/qcom/msm8996pro.dtsi new file mode 100644 index 000000000..63e1b4ec7 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8996pro.dtsi @@ -0,0 +1,266 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Linaro Limited + */ + +#include "msm8996.dtsi" + +/ { + /delete-node/ opp-table-cluster0; + /delete-node/ opp-table-cluster1; + + /* + * On MSM8996 Pro the cpufreq driver shifts speed bins into the high + * nibble of supported hw, so speed bin 0 becomes 0x10, speed bin 1 + * becomes 0x20, speed 2 becomes 0x40. + */ + + cluster0_opp: opp-table-cluster0 { + compatible = "operating-points-v2-kryo-cpu"; + nvmem-cells = <&speedbin_efuse>; + opp-shared; + + opp-307200000 { + opp-hz = /bits/ 64 <307200000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-460800000 { + opp-hz = /bits/ 64 <460800000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-537600000 { + opp-hz = /bits/ 64 <537600000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-614400000 { + opp-hz = /bits/ 64 <614400000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-691200000 { + opp-hz = /bits/ 64 <691200000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-768000000 { + opp-hz = /bits/ 64 <768000000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-844800000 { + opp-hz = /bits/ 64 <844800000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-902400000 { + opp-hz = /bits/ 64 <902400000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-979200000 { + opp-hz = /bits/ 64 <979200000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1056000000 { + opp-hz = /bits/ 64 <1056000000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1132800000 { + opp-hz = /bits/ 64 <1132800000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1209600000 { + opp-hz = /bits/ 64 <1209600000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1286400000 { + opp-hz = /bits/ 64 <1286400000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1363200000 { + opp-hz = /bits/ 64 <1363200000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1440000000 { + opp-hz = /bits/ 64 <1440000000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1516800000 { + opp-hz = /bits/ 64 <1516800000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1593600000 { + opp-hz = /bits/ 64 <1593600000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1996800000 { + opp-hz = /bits/ 64 <1996800000>; + opp-supported-hw = <0x20>; + clock-latency-ns = <200000>; + }; + opp-2188800000 { + opp-hz = /bits/ 64 <2188800000>; + opp-supported-hw = <0x10>; + clock-latency-ns = <200000>; + }; + }; + + cluster1_opp: opp-table-cluster1 { + compatible = "operating-points-v2-kryo-cpu"; + nvmem-cells = <&speedbin_efuse>; + opp-shared; + + opp-307200000 { + opp-hz = /bits/ 64 <307200000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-460800000 { + opp-hz = /bits/ 64 <460800000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-537600000 { + opp-hz = /bits/ 64 <537600000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-614400000 { + opp-hz = /bits/ 64 <614400000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-691200000 { + opp-hz = /bits/ 64 <691200000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-748800000 { + opp-hz = /bits/ 64 <748800000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-825600000 { + opp-hz = /bits/ 64 <825600000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-902400000 { + opp-hz = /bits/ 64 <902400000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-979200000 { + opp-hz = /bits/ 64 <979200000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1056000000 { + opp-hz = /bits/ 64 <1056000000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1132800000 { + opp-hz = /bits/ 64 <1132800000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1209600000 { + opp-hz = /bits/ 64 <1209600000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1286400000 { + opp-hz = /bits/ 64 <1286400000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1363200000 { + opp-hz = /bits/ 64 <1363200000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1440000000 { + opp-hz = /bits/ 64 <1440000000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1516800000 { + opp-hz = /bits/ 64 <1516800000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1593600000 { + opp-hz = /bits/ 64 <1593600000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1670400000 { + opp-hz = /bits/ 64 <1670400000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1747200000 { + opp-hz = /bits/ 64 <1747200000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1824000000 { + opp-hz = /bits/ 64 <1824000000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1900800000 { + opp-hz = /bits/ 64 <1900800000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1977600000 { + opp-hz = /bits/ 64 <1977600000>; + opp-supported-hw = <0x30>; + clock-latency-ns = <200000>; + }; + opp-2054400000 { + opp-hz = /bits/ 64 <2054400000>; + opp-supported-hw = <0x30>; + clock-latency-ns = <200000>; + }; + opp-2150400000 { + opp-hz = /bits/ 64 <2150400000>; + opp-supported-hw = <0x30>; + clock-latency-ns = <200000>; + }; + opp-2246400000 { + opp-hz = /bits/ 64 <2246400000>; + opp-supported-hw = <0x10>; + clock-latency-ns = <200000>; + }; + opp-2342400000 { + opp-hz = /bits/ 64 <2342400000>; + opp-supported-hw = <0x10>; + clock-latency-ns = <200000>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dts b/arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dts new file mode 100644 index 000000000..102f3e9a7 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dts @@ -0,0 +1,41 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2019, Jeffrey Hugo. All rights reserved. */ + +/dts-v1/; + +#include "msm8998-clamshell.dtsi" + +/ { + model = "Asus NovaGo TP370QL"; + compatible = "asus,novago-tp370ql", "qcom,msm8998"; + chassis-type = "convertible"; +}; + +&blsp1_i2c6 { + status = "okay"; + + touchpad@15 { + compatible = "hid-over-i2c"; + reg = <0x15>; + pinctrl-names = "default"; + pinctrl-0 = <&touchpad>; + + interrupt-parent = <&tlmm>; + interrupts = <123 IRQ_TYPE_LEVEL_LOW>; + + hid-descr-addr = <0x0001>; + }; + + keyboard@3a { + compatible = "hid-over-i2c"; + reg = <0x3a>; + interrupt-parent = <&tlmm>; + interrupts = <37 IRQ_TYPE_LEVEL_LOW>; + + hid-descr-addr = <0x0001>; + }; +}; + +&sdhc2 { + cd-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi new file mode 100644 index 000000000..7928b8197 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi @@ -0,0 +1,398 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2019, Jeffrey Hugo. All rights reserved. */ + +/* + * Common include for MSM8998 clamshell devices, ie the Lenovo Miix 630, + * Asus NovaGo TP370QL, and HP Envy x2. All three devices are basically the + * same, with differences in peripherals. + */ + +#include "msm8998.dtsi" +#include "pm8005.dtsi" +#include "pm8998.dtsi" + +/ { + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + }; +}; + +&blsp1_uart3 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + max-speed = <3200000>; + }; +}; + +&blsp1_uart3_on { + rx { + /delete-property/ bias-disable; + /* + * Configure a pull-up on 45 (RX). This is needed to + * avoid garbage data when the TX pin of the Bluetooth + * module is in tri-state (module powered off or not + * driving the signal yet). + */ + bias-pull-up; + }; + + cts { + /delete-property/ bias-disable; + /* + * Configure a pull-down on 47 (CTS) to match the pull + * of the Bluetooth module. + */ + bias-pull-down; + }; +}; + +/* + * The laptop FW does not appear to support the retention state as it is + * not advertised as enabled in ACPI, and enabling it in DT can cause boot + * hangs. + */ +&CPU0 { + cpu-idle-states = <&LITTLE_CPU_SLEEP_1>; +}; + +&CPU1 { + cpu-idle-states = <&LITTLE_CPU_SLEEP_1>; +}; + +&CPU2 { + cpu-idle-states = <&LITTLE_CPU_SLEEP_1>; +}; + +&CPU3 { + cpu-idle-states = <&LITTLE_CPU_SLEEP_1>; +}; + +&CPU4 { + cpu-idle-states = <&BIG_CPU_SLEEP_1>; +}; + +&CPU5 { + cpu-idle-states = <&BIG_CPU_SLEEP_1>; +}; + +&CPU6 { + cpu-idle-states = <&BIG_CPU_SLEEP_1>; +}; + +&CPU7 { + cpu-idle-states = <&BIG_CPU_SLEEP_1>; +}; + +/* + * If EFIFB is used, enabling MMCC will cause important MMSS clocks to be cleaned + * up, because as far as Linux is concerned - they are unused. Disable it by default + * on clamshell devices, as it will break them, unless either simplefb is configured to + * hold a vote for these clocks, or panels are brought up properly, using drm/msm. + */ +&mmcc { + status = "disabled"; +}; + +&mmss_smmu { + status = "disabled"; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie_phy { + status = "okay"; +}; + +&pm8005_regulators { + vdd_s1-supply = <&vph_pwr>; + + pm8005_s1: s1 { /* VDD_GFX supply */ + regulator-min-microvolt = <524000>; + regulator-max-microvolt = <1100000>; + regulator-enable-ramp-delay = <500>; + + /* hack until we rig up the gpu consumer */ + regulator-always-on; + }; +}; + +&qusb2phy { + status = "okay"; + + vdd-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; +}; + +&rpm_requests { + pm8998-regulators { + compatible = "qcom,rpm-pm8998-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_s8-supply = <&vph_pwr>; + vdd_s9-supply = <&vph_pwr>; + vdd_s10-supply = <&vph_pwr>; + vdd_s11-supply = <&vph_pwr>; + vdd_s12-supply = <&vph_pwr>; + vdd_s13-supply = <&vph_pwr>; + vdd_l1_l27-supply = <&vreg_s7a_1p025>; + vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>; + vdd_l3_l11-supply = <&vreg_s7a_1p025>; + vdd_l4_l5-supply = <&vreg_s7a_1p025>; + vdd_l6-supply = <&vreg_s5a_2p04>; + vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>; + vdd_l9-supply = <&vph_pwr>; + vdd_l10_l23_l25-supply = <&vph_pwr>; + vdd_l13_l19_l21-supply = <&vph_pwr>; + vdd_l16_l28-supply = <&vph_pwr>; + vdd_l18_l22-supply = <&vph_pwr>; + vdd_l20_l24-supply = <&vph_pwr>; + vdd_l26-supply = <&vreg_s3a_1p35>; + vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p35: s3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_s4a_1p8: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + }; + + vreg_s5a_2p04: s5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7a_1p025: s7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + + vreg_l1a_0p875: l1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-allow-set-load; + }; + + vreg_l2a_1p2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-allow-set-load; + }; + + vreg_l3a_1p0: l3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_l5a_0p8: l5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + vreg_l6a_1p8: l6 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <1808000>; + }; + + vreg_l7a_1p8: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + }; + + vreg_l8a_1p2: l8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l9a_1p8: l9 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + + vreg_l10a_1p8: l10 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + + vreg_l11a_1p0: l11 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_l12a_1p8: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l13a_2p95: l13 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + + vreg_l14a_1p88: l14 { + regulator-min-microvolt = <1880000>; + regulator-max-microvolt = <1880000>; + }; + + vreg_l15a_1p8: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l16a_2p7: l16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + }; + + vreg_l17a_1p3: l17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-allow-set-load; + }; + + vreg_l18a_2p7: l18 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + }; + + vreg_l19a_3p0: l19 { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + }; + + vreg_l20a_2p95: l20 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-allow-set-load; + }; + + vreg_l21a_2p95: l21 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-allow-set-load; + regulator-system-load = <800000>; + }; + + vreg_l22a_2p85: l22 { + regulator-min-microvolt = <2864000>; + regulator-max-microvolt = <2864000>; + }; + + vreg_l23a_3p3: l23 { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3312000>; + }; + + vreg_l24a_3p075: l24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + }; + + vreg_l25a_3p3: l25 { + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3312000>; + regulator-allow-set-load; + }; + + vreg_l26a_1p2: l26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l28_3p0: l28 { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + }; + + vreg_lvs1a_1p8: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; +}; + +&remoteproc_mss { + status = "okay"; +}; + +&sdhc2 { + status = "okay"; + + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vreg_l13a_2p95>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on &sdc2_cd>; + pinctrl-1 = <&sdc2_off &sdc2_cd>; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <81 4>; + + touchpad: touchpad-pin { + pins = "gpio123"; + bias-pull-up; + }; +}; + +&ufshc { + status = "okay"; +}; + +&ufsphy { + status = "okay"; + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l2a_1p2>; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + dr_mode = "host"; /* Force to host until we have Type-C hooked up */ +}; + +&usb3phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l2a_1p2>; +}; + +&wifi { + status = "okay"; + + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts new file mode 100644 index 000000000..429ba57e2 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts @@ -0,0 +1,725 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, AngeloGioacchino Del Regno + * + */ + +/dts-v1/; + +#include +#include +#include +#include "msm8998.dtsi" +#include "pm8005.dtsi" +#include "pm8998.dtsi" +#include "pmi8998.dtsi" + +/ { + model = "F(x)tec Pro1 (QX1000)"; + compatible = "fxtec,pro1", "qcom,msm8998"; + chassis-type = "handset"; + qcom,board-id = <0x02000b 0x10>; + + aliases { + serial0 = &blsp2_uart1; + serial1 = &blsp1_uart3; + }; + + /* + * Until we hook up type-c detection, we + * have to stick with this. But it works. + */ + extcon_usb: extcon-usb { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&tlmm 38 GPIO_ACTIVE_HIGH>; + }; + + gpio-hall-sensors { + compatible = "gpio-keys"; + label = "Hall sensors"; + pinctrl-names = "default"; + pinctrl-0 = <&hall_sensor1_default>; + + event-hall-sensor1 { + label = "Keyboard Hall Sensor"; + gpios = <&tlmm 124 GPIO_ACTIVE_HIGH>; + debounce-interval = <15>; + gpio-key,wakeup; + linux,input-type = ; + linux,code = ; + }; + }; + + gpio-kb-extra-keys { + compatible = "gpio-keys"; + label = "Keyboard extra keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_kb_pins_extra>; + + key-home { + label = "Home"; + gpios = <&tlmm 21 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <15>; + linux,can-disable; + }; + + key-super-l { + label = "Super Left"; + gpios = <&tlmm 32 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <15>; + linux,can-disable; + }; + + key-super-r { + label = "Super Right"; + gpios = <&tlmm 33 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <15>; + linux,can-disable; + }; + + key-shift { + label = "Shift"; + gpios = <&tlmm 114 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <15>; + linux,can-disable; + }; + + key-ctrl { + label = "Ctrl"; + gpios = <&tlmm 128 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <15>; + linux,can-disable; + }; + + key-alt { + label = "Alt"; + gpios = <&tlmm 129 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <15>; + linux,can-disable; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + label = "Side buttons"; + pinctrl-names = "default"; + pinctrl-0 = <&vol_up_pin_a>, <&cam_focus_pin_a>, + <&cam_snapshot_pin_a>; + button-vol-up { + label = "Volume Up"; + gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + linux,input-type = ; + linux,code = ; + gpio-key,wakeup; + debounce-interval = <15>; + }; + + button-camera-snapshot { + label = "Camera Snapshot"; + gpios = <&pm8998_gpio 7 GPIO_ACTIVE_LOW>; + linux,input-type = ; + linux,code = ; + debounce-interval = <15>; + }; + + button-camera-focus { + label = "Camera Focus"; + gpios = <&pm8998_gpio 8 GPIO_ACTIVE_LOW>; + linux,input-type = ; + linux,code = ; + debounce-interval = <15>; + }; + }; + + keyboard-leds { + compatible = "gpio-leds"; + + led-0 { + color = ; + default-state = "off"; + function = LED_FUNCTION_KBD_BACKLIGHT; + gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>; + label = "white:kbd_backlight"; + retain-state-suspended; + }; + + led-1 { + color = ; + default-state = "off"; + function = LED_FUNCTION_CAPSLOCK; + gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>; + label = "yellow:capslock"; + linux,default-trigger = "kbd-capslock"; + }; + }; + + reserved-memory { + cont_splash_mem: memory@9d400000 { + reg = <0x0 0x9d400000 0x0 0x2000000>; + no-map; + }; + + zap_shader_region: memory@f6400000 { + compatible = "shared-dma-pool"; + reg = <0x0 0xf6400000 0x0 0x2000>; + no-map; + }; + + ramoops@ffc00000 { + compatible = "ramoops"; + reg = <0x0 0xffc00000 0x0 0x100000>; + console-size = <0x60000>; + ecc-size = <16>; + ftrace-size = <0x10000>; + pmsg-size = <0x20000>; + record-size = <0x10000>; + }; + }; + + ts_vio_vreg: ts-vio-vreg { + compatible = "regulator-fixed"; + regulator-name = "ts_vio_reg"; + startup-delay-us = <2>; + enable-active-high; + gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_vio_default>; + regulator-always-on; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + }; +}; + +&blsp1_uart3 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + max-speed = <3200000>; + }; +}; + +&blsp1_uart3_on { + rx { + /delete-property/ bias-disable; + /* + * Configure a pull-up on 45 (RX). This is needed to + * avoid garbage data when the TX pin of the Bluetooth + * module is in tri-state (module powered off or not + * driving the signal yet). + */ + bias-pull-up; + }; + + cts { + /delete-property/ bias-disable; + /* + * Configure a pull-down on 47 (CTS) to match the pull + * of the Bluetooth module. + */ + bias-pull-down; + }; +}; + +&blsp2_uart1 { + status = "okay"; +}; + +&blsp2_i2c1 { + status = "okay"; + + touchscreen@14 { + compatible = "goodix,gt9286"; + reg = <0x14>; + interrupt-parent = <&tlmm>; + interrupts = <125 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 89 GPIO_ACTIVE_HIGH>; + AVDD28-supply = <&vreg_l28_3p0>; + VDDIO-supply = <&ts_vio_vreg>; + pinctrl-names = "active"; + pinctrl-0 = <&ts_rst_n>, <&ts_int_n>; + }; +}; + +&etf { + status = "okay"; +}; + +&etm1 { + status = "okay"; +}; + +&etm2 { + status = "okay"; +}; + +&etm3 { + status = "okay"; +}; + +&etm4 { + status = "okay"; +}; + +&etm5 { + status = "okay"; +}; + +&etm6 { + status = "okay"; +}; + +&etm7 { + status = "okay"; +}; + +&etm8 { + status = "okay"; +}; + +&etr { + status = "okay"; +}; + +&funnel1 { + status = "okay"; +}; + +&funnel2 { + status = "okay"; +}; + +&funnel3 { + status = "okay"; +}; + +&funnel4 { + // FIXME: Figure out why clock late_initcall crashes the board with + // this enabled. + // status = "okay"; +}; + +&funnel5 { + // FIXME: Figure out why clock late_initcall crashes the board with + // this enabled. + // status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie_phy { + status = "okay"; +}; + +&pm8005_regulators { + vdd_s1-supply = <&vph_pwr>; + + pm8005_s1: s1 { /* VDD_GFX supply */ + regulator-min-microvolt = <524000>; + regulator-max-microvolt = <1100000>; + regulator-enable-ramp-delay = <500>; + + /* Hack until we rig up the gpu consumer */ + regulator-always-on; + }; +}; + +&pm8998_gpio { + vol_up_pin_a: vol-up-active-state { + pins = "gpio6"; + function = "normal"; + bias-pull-up; + input-enable; + qcom,drive-strength = ; + }; + + cam_focus_pin_a: cam-focus-btn-active-state { + pins = "gpio7"; + function = "normal"; + bias-pull-up; + input-enable; + qcom,drive-strength = ; + }; + + cam_snapshot_pin_a: cam-snapshot-btn-active-state { + pins = "gpio8"; + function = "normal"; + bias-pull-up; + input-enable; + qcom,drive-strength = ; + }; +}; + +&pm8998_pon { + resin { + compatible = "qcom,pm8941-resin"; + interrupts = ; + bias-pull-up; + debounce = <15625>; + linux,code = ; + }; +}; + +&qusb2phy { + status = "okay"; + + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; +}; + +&replicator1 { + status = "okay"; +}; + +&rpm_requests { + pm8998-regulators { + compatible = "qcom,rpm-pm8998-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_s8-supply = <&vph_pwr>; + vdd_s9-supply = <&vph_pwr>; + vdd_s10-supply = <&vph_pwr>; + vdd_s11-supply = <&vph_pwr>; + vdd_s12-supply = <&vph_pwr>; + vdd_s13-supply = <&vph_pwr>; + vdd_l1_l27-supply = <&vreg_s7a_1p025>; + vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>; + vdd_l3_l11-supply = <&vreg_s7a_1p025>; + vdd_l4_l5-supply = <&vreg_s7a_1p025>; + vdd_l6-supply = <&vreg_s5a_2p04>; + vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>; + vdd_l9-supply = <&vreg_bob>; + vdd_l10_l23_l25-supply = <&vreg_bob>; + vdd_l13_l19_l21-supply = <&vreg_bob>; + vdd_l16_l28-supply = <&vreg_bob>; + vdd_l18_l22-supply = <&vreg_bob>; + vdd_l20_l24-supply = <&vreg_bob>; + vdd_l26-supply = <&vreg_s3a_1p35>; + vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p35: s3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_s4a_1p8: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + }; + + vreg_s5a_2p04: s5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7a_1p025: s7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + + vreg_l1a_0p875: l1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + }; + + vreg_l2a_1p2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l3a_1p0: l3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_l5a_0p8: l5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + vreg_l6a_1p8: l6 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <1808000>; + }; + + vreg_l7a_1p8: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l8a_1p2: l8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l9a_1p8: l9 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + + vreg_l10a_1p8: l10 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + + vreg_l11a_1p0: l11 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_l12a_1p8: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l13a_2p95: l13 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + + vreg_l14a_1p88: l14 { + regulator-min-microvolt = <1880000>; + regulator-max-microvolt = <1880000>; + }; + + vreg_l15a_1p8: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l16a_2p7: l16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + }; + + vreg_l17a_1p3: l17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + }; + + vreg_l18a_2p7: l18 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + }; + + vreg_l19a_3p0: l19 { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + }; + + vreg_l20a_2p95: l20 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-allow-set-load; + }; + + vreg_l21a_2p95: l21 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-system-load = <800000>; + regulator-allow-set-load; + }; + + vreg_l22a_2p85: l22 { + regulator-min-microvolt = <2864000>; + regulator-max-microvolt = <2864000>; + }; + + vreg_l23a_3p3: l23 { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3312000>; + }; + + vreg_l24a_3p075: l24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + }; + + vreg_l25a_3p3: l25 { + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3312000>; + }; + + vreg_l26a_1p2: l26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-allow-set-load; + }; + + vreg_l28_3p0: l28 { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + }; + + vreg_lvs1a_1p8: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + }; + + pmi8998-regulators { + compatible = "qcom,rpm-pmi8998-regulators"; + + vdd_bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3600000>; + }; + }; +}; + +&remoteproc_adsp { + status = "okay"; +}; + +&remoteproc_mss { + status = "okay"; +}; + +&remoteproc_slpi { + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>; + + mdp_vsync_n: mdp-vsync-n { + pins = "gpio10"; + function = "mdp_vsync_a"; + bias-pull-down; + drive-strength = <2>; + }; + + gpio_kb_pins_extra: gpio-kb-pins-extra { + pins = "gpio21", "gpio32", "gpio33", "gpio114", + "gpio128", "gpio129"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + ts_vio_default: ts-vio-def { + pins = "gpio81"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + + ts_rst_n: ts-rst-n { + pins = "gpio89"; + function = "gpio"; + bias-pull-up; + drive-strength = <8>; + }; + + hall_sensor1_default: hall-sensor1-def { + pins = "gpio124"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + input-enable; + }; + + ts_int_n: ts-int-n { + pins = "gpio125"; + function = "gpio"; + bias-disable; + drive-strength = <8>; + }; +}; + +&sdhc2 { + status = "okay"; + cd-gpios = <&tlmm 95 GPIO_ACTIVE_LOW>; + + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vreg_l13a_2p95>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on &sdc2_cd>; + pinctrl-1 = <&sdc2_off &sdc2_cd>; +}; + +&stm { + status = "okay"; +}; + +&ufshc { + status = "okay"; + vcc-supply = <&vreg_l20a_2p95>; + vccq-supply = <&vreg_l26a_1p2>; + vccq2-supply = <&vreg_s4a_1p8>; + vcc-max-microamp = <750000>; + vccq-max-microamp = <560000>; + vccq2-max-microamp = <750000>; +}; + +&ufsphy { + status = "okay"; + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l2a_1p2>; + vddp-ref-clk-supply = <&vreg_l26a_1p2>; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + dr_mode = "peripheral"; + extcon = <&extcon_usb>; +}; + +&usb3phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l2a_1p2>; +}; + +/* GT9286 analog supply */ +&vreg_l28_3p0 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; +}; + +&wifi { + status = "okay"; + + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dts b/arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dts new file mode 100644 index 000000000..38389c6a3 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dts @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2019, Jeffrey Hugo. All rights reserved. */ + +/dts-v1/; + +#include "msm8998-clamshell.dtsi" + +/ { + model = "HP Envy x2"; + compatible = "hp,envy-x2", "qcom,msm8998"; + chassis-type = "convertible"; +}; + +&blsp1_i2c6 { + status = "okay"; + + keyboard@3a { + compatible = "hid-over-i2c"; + reg = <0x3a>; + pinctrl-names = "default"; + pinctrl-0 = <&touchpad>; + + interrupt-parent = <&tlmm>; + interrupts = <121 IRQ_TYPE_LEVEL_LOW>; + + hid-descr-addr = <0x0001>; + }; +}; + +&sdhc2 { + cd-gpios = <&tlmm 95 GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts b/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts new file mode 100644 index 000000000..cf81c33a9 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2019, Jeffrey Hugo. All rights reserved. */ + +/dts-v1/; + +#include "msm8998-clamshell.dtsi" + +/ { + model = "Lenovo Miix 630"; + compatible = "lenovo,miix-630", "qcom,msm8998"; + chassis-type = "convertible"; +}; + +&blsp1_i2c6 { + status = "okay"; + + keyboard@3a { + compatible = "hid-over-i2c"; + reg = <0x3a>; + pinctrl-names = "default"; + pinctrl-0 = <&touchpad>; + + interrupt-parent = <&tlmm>; + interrupts = <121 IRQ_TYPE_LEVEL_LOW>; + + hid-descr-addr = <0x0001>; + }; +}; + +&remoteproc_mss { + firmware-name = "qcom/LENOVO/81F1/qcdsp1v28998.mbn", + "qcom/LENOVO/81F1/qcdsp28998.mbn"; +}; + +&sdhc2 { + cd-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dts b/arch/arm64/boot/dts/qcom/msm8998-mtp.dts new file mode 100644 index 000000000..a3ca58100 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dts @@ -0,0 +1,452 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2016, The Linux Foundation. All rights reserved. */ + +/dts-v1/; + +#include "msm8998.dtsi" +#include "pm8005.dtsi" +#include "pm8998.dtsi" +#include "pmi8998.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. MSM8998 v1 MTP"; + compatible = "qcom,msm8998-mtp", "qcom,msm8998"; + + qcom,board-id = <8 0>; + + aliases { + serial0 = &blsp2_uart1; + serial1 = &blsp1_uart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + }; +}; + +&blsp1_uart3 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + max-speed = <3200000>; + }; +}; + +&blsp1_uart3_on { + rx { + /delete-property/ bias-disable; + /* + * Configure a pull-up on 45 (RX). This is needed to + * avoid garbage data when the TX pin of the Bluetooth + * module is in tri-state (module powered off or not + * driving the signal yet). + */ + bias-pull-up; + }; + + cts { + /delete-property/ bias-disable; + /* + * Configure a pull-down on 47 (CTS) to match the pull + * of the Bluetooth module. + */ + bias-pull-down; + }; +}; + +&blsp2_uart1 { + status = "okay"; +}; + +&etf { + status = "okay"; +}; + +&etm1 { + status = "okay"; +}; + +&etm2 { + status = "okay"; +}; + +&etm3 { + status = "okay"; +}; + +&etm4 { + status = "okay"; +}; + +&etm5 { + status = "okay"; +}; + +&etm6 { + status = "okay"; +}; + +&etm7 { + status = "okay"; +}; + +&etm8 { + status = "okay"; +}; + +&etr { + status = "okay"; +}; + +&funnel1 { + status = "okay"; +}; + +&funnel2 { + status = "okay"; +}; + +&funnel3 { + status = "okay"; +}; + +&funnel4 { + // FIXME: Figure out why clock late_initcall crashes the board with + // this enabled. + // status = "okay"; +}; + +&funnel5 { + // FIXME: Figure out why clock late_initcall crashes the board with + // this enabled. + // status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie_phy { + status = "okay"; +}; + +&pm8005_regulators { + vdd_s1-supply = <&vph_pwr>; + + pm8005_s1: s1 { /* VDD_GFX supply */ + regulator-min-microvolt = <524000>; + regulator-max-microvolt = <1100000>; + regulator-enable-ramp-delay = <500>; + + /* Hack until we rig up the gpu consumer */ + regulator-always-on; + }; +}; + +&qusb2phy { + status = "okay"; + + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; +}; + +&replicator1 { + status = "okay"; +}; + +&rpm_requests { + pm8998-regulators { + compatible = "qcom,rpm-pm8998-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_s8-supply = <&vph_pwr>; + vdd_s9-supply = <&vph_pwr>; + vdd_s10-supply = <&vph_pwr>; + vdd_s11-supply = <&vph_pwr>; + vdd_s12-supply = <&vph_pwr>; + vdd_s13-supply = <&vph_pwr>; + vdd_l1_l27-supply = <&vreg_s7a_1p025>; + vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>; + vdd_l3_l11-supply = <&vreg_s7a_1p025>; + vdd_l4_l5-supply = <&vreg_s7a_1p025>; + vdd_l6-supply = <&vreg_s5a_2p04>; + vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>; + vdd_l9-supply = <&vreg_bob>; + vdd_l10_l23_l25-supply = <&vreg_bob>; + vdd_l13_l19_l21-supply = <&vreg_bob>; + vdd_l16_l28-supply = <&vreg_bob>; + vdd_l18_l22-supply = <&vreg_bob>; + vdd_l20_l24-supply = <&vreg_bob>; + vdd_l26-supply = <&vreg_s3a_1p35>; + vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p35: s3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_s4a_1p8: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + }; + + vreg_s5a_2p04: s5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7a_1p025: s7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + + vreg_l1a_0p875: l1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + }; + + vreg_l2a_1p2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l3a_1p0: l3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_l5a_0p8: l5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + vreg_l6a_1p8: l6 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <1808000>; + }; + + vreg_l7a_1p8: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l8a_1p2: l8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l9a_1p8: l9 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + + vreg_l10a_1p8: l10 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + + vreg_l11a_1p0: l11 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_l12a_1p8: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l13a_2p95: l13 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + + vreg_l14a_1p88: l14 { + regulator-min-microvolt = <1880000>; + regulator-max-microvolt = <1880000>; + }; + + vreg_l15a_1p8: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l16a_2p7: l16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + }; + + vreg_l17a_1p3: l17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + }; + + vreg_l18a_2p7: l18 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + }; + + vreg_l19a_3p0: l19 { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + }; + + vreg_l20a_2p95: l20 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-allow-set-load; + }; + + vreg_l21a_2p95: l21 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-system-load = <800000>; + regulator-allow-set-load; + }; + + vreg_l22a_2p85: l22 { + regulator-min-microvolt = <2864000>; + regulator-max-microvolt = <2864000>; + }; + + vreg_l23a_3p3: l23 { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3312000>; + }; + + vreg_l24a_3p075: l24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + }; + + vreg_l25a_3p3: l25 { + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3312000>; + }; + + vreg_l26a_1p2: l26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-allow-set-load; + }; + + vreg_l28_3p0: l28 { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + }; + + vreg_lvs1a_1p8: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + }; + + pmi8998-regulators { + compatible = "qcom,rpm-pmi8998-regulators"; + + vdd_bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3600000>; + }; + }; +}; + +&remoteproc_adsp { + status = "okay"; +}; + +&remoteproc_mss { + status = "okay"; +}; + +&remoteproc_slpi { + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <81 4>; +}; + +&sdhc2 { + status = "okay"; + cd-gpios = <&tlmm 95 GPIO_ACTIVE_LOW>; + + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vreg_l13a_2p95>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on &sdc2_cd>; + pinctrl-1 = <&sdc2_off &sdc2_cd>; +}; + +&stm { + status = "okay"; +}; + +&ufshc { + status = "okay"; + vcc-supply = <&vreg_l20a_2p95>; + vccq-supply = <&vreg_l26a_1p2>; + vccq2-supply = <&vreg_s4a_1p8>; + vcc-max-microamp = <750000>; + vccq-max-microamp = <560000>; + vccq2-max-microamp = <750000>; +}; + +&ufsphy { + status = "okay"; + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l2a_1p2>; + vddp-ref-clk-supply = <&vreg_l26a_1p2>; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + dr_mode = "host"; /* Force to host until we have Type-C hooked up */ +}; + +&usb3phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l2a_1p2>; +}; + +&wifi { + status = "okay"; + + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts b/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts new file mode 100644 index 000000000..ef2a88a64 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts @@ -0,0 +1,43 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * OnePlus 5 (cheeseburger) device tree + * + * Copyright (c) 2021, Jami Kettunen + */ + +#include +#include "msm8998-oneplus-common.dtsi" + +/ { + model = "OnePlus 5"; + compatible = "oneplus,cheeseburger", "qcom,msm8998"; + chassis-type = "handset"; + /* Required for bootloader to select correct board */ + qcom,board-id = <8 0 16859 23>; + + /* Capacitive keypad button backlight */ + leds { + compatible = "gpio-leds"; + + pinctrl-names = "default"; + pinctrl-0 = <&button_backlight_default>; + + button-backlight { + gpios = <&pmi8998_gpio 5 GPIO_ACTIVE_HIGH>; + color = ; + function = LED_FUNCTION_KBD_BACKLIGHT; + default-state = "off"; + }; + }; +}; + +&pmi8998_gpio { + button_backlight_default: button-backlight-state { + pinconf { + pins = "gpio5"; + function = "normal"; + bias-pull-down; + qcom,drive-strength = ; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi new file mode 100644 index 000000000..62bda2379 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi @@ -0,0 +1,576 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * OnePlus 5(T) (cheeseburger / dumpling) common device tree source based on msm8998-mtp.dtsi + * + * Copyright (c) 2021, Jami Kettunen + * Copyright (c) 2016, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include +#include +#include "msm8998.dtsi" +#include "pm8005.dtsi" +#include "pm8998.dtsi" +#include "pmi8998.dtsi" + +/ { + /* Required for bootloader to select correct board */ + qcom,msm-id = <292 0x20001>; /* 8998 v2.1 */ + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* Use display framebuffer setup by the UEFI XBL bootloader for simplefb */ + framebuffer0: framebuffer@9d400000 { + compatible = "simple-framebuffer"; + reg = <0x0 0x9d400000 0x0 0x2400000>; + width = <1080>; + height = <1920>; + stride = <(1080 * 4)>; + format = "a8r8g8b8"; + /* + * That's a lot of clocks, but it's necessary due + * to unused clk cleanup & no panel driver yet.. + */ + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_VSYNC_CLK>, + <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_BYTE0_CLK>, + <&mmcc MDSS_BYTE0_INTF_CLK>, + <&mmcc MDSS_PCLK0_CLK>, + <&mmcc MDSS_ESC0_CLK>; + power-domains = <&mmcc MDSS_GDSC>; + }; + }; + + reserved-memory { + /* Bootloader display framebuffer region */ + cont_splash_mem: memory@9d400000 { + reg = <0x0 0x9d400000 0x0 0x2400000>; + no-map; + }; + + /* For getting crash logs using Android downstream kernels */ + ramoops@ac000000 { + compatible = "ramoops"; + reg = <0x0 0xac000000 0x0 0x200000>; + console-size = <0x80000>; + pmsg-size = <0x40000>; + record-size = <0x8000>; + ftrace-size = <0x20000>; + }; + + /* + * The following memory regions on downstream are "dynamically allocated" + * but given the same addresses every time. Hard code them as these addresses + * are where the OnePlus signed firmware expects them to be. + */ + ipa_fws_region: ipa@f6800000 { + compatible = "shared-dma-pool"; + reg = <0x0 0xf6800000 0x0 0x5000>; + no-map; + }; + zap_shader_region: gpu@f6900000 { + compatible = "shared-dma-pool"; + reg = <0x0 0xf6900000 0x0 0x2000>; + no-map; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + label = "Volume buttons"; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&vol_keys_default>; + + button-vol-down { + label = "Volume down"; + gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <15>; + wakeup-source; + }; + + button-vol-up { + label = "Volume up"; + gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <15>; + wakeup-source; + }; + }; + + gpio-hall-sensor { + compatible = "gpio-keys"; + label = "Hall effect sensor"; + + pinctrl-names = "default"; + pinctrl-0 = <&hall_sensor_default>; + + event-hall-sensor { + label = "Hall Effect Sensor"; + gpios = <&tlmm 124 GPIO_ACTIVE_LOW>; + linux,input-type = ; + linux,code = ; + linux,can-disable; + wakeup-source; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + }; +}; + +/* + * OnePlus' ADSP firmware requires 30 MiB in total, so increase the adsp_mem + * region by 4 MiB to account for this while relocating the other now + * conflicting memory nodes accordingly. + */ +&adsp_mem { + reg = <0x0 0x8b200000 0x0 0x1e00000>; +}; +&mpss_mem { + reg = <0x0 0x8d000000 0x0 0x7000000>; +}; +&venus_mem { + reg = <0x0 0x94000000 0x0 0x500000>; +}; +&mba_mem { + reg = <0x0 0x94500000 0x0 0x200000>; +}; +&slpi_mem { + reg = <0x0 0x94700000 0x0 0xf00000>; +}; +&ipa_fw_mem { + reg = <0x0 0x95600000 0x0 0x10000>; +}; +&ipa_gsi_mem { + reg = <0x0 0x95610000 0x0 0x5000>; +}; +&gpu_mem { + reg = <0x0 0x95615000 0x0 0x100000>; +}; +&wlan_msa_mem { + reg = <0x0 0x95715000 0x0 0x100000>; +}; + +&blsp1_i2c5 { + status = "okay"; + + touchscreen@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&tlmm>; + interrupts = <125 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_active &ts_reset_active>; + + vdd-supply = <&vreg_l28_3p0>; + vio-supply = <&vreg_l6a_1p8>; + + syna,reset-delay-ms = <20>; + syna,startup-delay-ms = <20>; + + rmi4-f01@1 { + reg = <0x01>; + syna,nosleep-mode = <1>; + }; + + rmi4_f12: rmi4-f12@12 { + reg = <0x12>; + syna,rezero-wait-ms = <20>; + syna,sensor-type = <1>; + touchscreen-x-mm = <68>; + touchscreen-y-mm = <122>; + }; + }; +}; + +&blsp1_i2c6 { + status = "okay"; + + nfc@28 { + compatible = "nxp,nxp-nci-i2c"; + reg = <0x28>; + + interrupt-parent = <&tlmm>; + interrupts = <92 IRQ_TYPE_LEVEL_HIGH>; + + enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&nfc_int_active &nfc_enable_active>; + }; +}; + +&blsp1_uart3 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + max-speed = <3200000>; + }; +}; + +&blsp1_uart3_on { + rx { + /delete-property/ bias-disable; + /* + * Configure a pull-up on 46 (RX). This is needed to + * avoid garbage data when the TX pin of the Bluetooth + * module is in tri-state (module powered off or not + * driving the signal yet). + */ + bias-pull-up; + }; + + cts { + /delete-property/ bias-disable; + /* + * Configure a pull-down on 47 (CTS) to match the pull + * of the Bluetooth module. + */ + bias-pull-down; + }; +}; + +&blsp2_uart1 { + status = "okay"; +}; + +&pm8005_regulators { + /* VDD_GFX supply */ + pm8005_s1: s1 { + regulator-min-microvolt = <524000>; + regulator-max-microvolt = <1100000>; + regulator-enable-ramp-delay = <500>; + /* Hack until we rig up the gpu consumer */ + regulator-always-on; + }; +}; + +&pm8998_gpio { + vol_keys_default: vol-keys-state { + pins = "gpio5", "gpio6"; + function = "normal"; + bias-pull-up; + input-enable; + qcom,drive-strength = ; + }; +}; + +&qusb2phy { + status = "okay"; + + vdd-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; +}; + +&rpm_requests { + pm8998-regulators { + compatible = "qcom,rpm-pm8998-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_s8-supply = <&vph_pwr>; + vdd_s9-supply = <&vph_pwr>; + vdd_s10-supply = <&vph_pwr>; + vdd_s11-supply = <&vph_pwr>; + vdd_s12-supply = <&vph_pwr>; + vdd_s13-supply = <&vph_pwr>; + vdd_l1_l27-supply = <&vreg_s7a_1p025>; + vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>; + vdd_l3_l11-supply = <&vreg_s7a_1p025>; + vdd_l4_l5-supply = <&vreg_s7a_1p025>; + vdd_l6-supply = <&vreg_s5a_2p04>; + vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>; + vdd_l9-supply = <&vreg_bob>; + vdd_l10_l23_l25-supply = <&vreg_bob>; + vdd_l13_l19_l21-supply = <&vreg_bob>; + vdd_l16_l28-supply = <&vreg_bob>; + vdd_l18_l22-supply = <&vreg_bob>; + vdd_l20_l24-supply = <&vreg_bob>; + vdd_l26-supply = <&vreg_s3a_1p35>; + vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p35: s3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_s4a_1p8: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + }; + + vreg_s5a_2p04: s5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7a_1p025: s7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + + vreg_l1a_0p875: l1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + }; + + vreg_l2a_1p2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l3a_1p0: l3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_l5a_0p8: l5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + vreg_l6a_1p8: l6 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <1808000>; + }; + + vreg_l7a_1p8: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l8a_1p2: l8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l9a_1p8: l9 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + + vreg_l10a_1p8: l10 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + + vreg_l11a_1p0: l11 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_l12a_1p8: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l13a_2p95: l13 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + + vreg_l14a_1p88: l14 { + regulator-min-microvolt = <1880000>; + regulator-max-microvolt = <1880000>; + }; + + vreg_l15a_1p8: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l16a_2p7: l16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + }; + + vreg_l17a_1p3: l17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + }; + + vreg_l18a_2p7: l18 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + }; + + vreg_l19a_3p0: l19 { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + }; + + vreg_l20a_2p95: l20 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-allow-set-load; + }; + vreg_l21a_2p95: l21 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-system-load = <800000>; + regulator-allow-set-load; + }; + + vreg_l22a_2p85: l22 { + regulator-min-microvolt = <2864000>; + regulator-max-microvolt = <2864000>; + }; + + vreg_l23a_3p3: l23 { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3312000>; + }; + + vreg_l24a_3p075: l24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + }; + + vreg_l25a_3p3: l25 { + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3312000>; + }; + + vreg_l26a_1p2: l26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-allow-set-load; + }; + + vreg_l28_3p0: l28 { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + }; + + vreg_lvs1a_1p8: lvs1 { }; + vreg_lvs2a_1p8: lvs2 { }; + }; + + pmi8998-regulators { + compatible = "qcom,rpm-pmi8998-regulators"; + + vdd_bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3600000>; + }; + }; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <81 4>; + + hall_sensor_default: hall-sensor-default { + pins = "gpio124"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + input-enable; + }; + + ts_int_active: ts-int-active { + pins = "gpio125"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + ts_reset_active: ts-reset-active { + pins = "gpio89"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + nfc_int_active: nfc-int-active { + pins = "gpio92"; + function = "gpio"; + drive-strength = <6>; + bias-pull-up; + }; + + nfc_enable_active: nfc-enable-active { + pins = "gpio12", "gpio116"; + function = "gpio"; + drive-strength = <6>; + bias-pull-up; + }; +}; + +&ufshc { + status = "okay"; + + vcc-supply = <&vreg_l20a_2p95>; + vccq-supply = <&vreg_l26a_1p2>; + vccq2-supply = <&vreg_s4a_1p8>; + vcc-max-microamp = <750000>; + vccq-max-microamp = <560000>; + vccq2-max-microamp = <750000>; +}; + +&ufsphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l2a_1p2>; + vddp-ref-clk-supply = <&vreg_l26a_1p2>; +}; + +&usb3 { + status = "okay"; + + /* Disable USB3 clock requirement as the device only supports USB2 */ + qcom,select-utmi-as-pipe-clk; +}; + +&usb3_dwc3 { + /* Drop the unused USB 3 PHY */ + phys = <&qusb2phy>; + phy-names = "usb2-phy"; + + /* Fastest mode for USB 2 */ + maximum-speed = "high-speed"; + + /* Force to peripheral until we can switch modes */ + dr_mode = "peripheral"; +}; + +&wifi { + /* Leave disabled until MSS is functional */ + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-dumpling.dts b/arch/arm64/boot/dts/qcom/msm8998-oneplus-dumpling.dts new file mode 100644 index 000000000..5d0dabbae --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-dumpling.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * OnePlus 5T (dumpling) device tree + * + * Copyright (c) 2021, Jami Kettunen + */ + +#include "msm8998-oneplus-common.dtsi" + +/ { + model = "OnePlus 5T"; + compatible = "oneplus,dumpling", "qcom,msm8998"; + chassis-type = "handset"; + /* Required for bootloader to select correct board */ + qcom,board-id = <8 0 17801 43>; +}; + +/* Update the screen height values from 1920 to 2160 on the 5T */ +&framebuffer0 { + height = <2160>; +}; + +/* Adjust digitizer area height to match the 5T's taller panel */ +&rmi4_f12 { + touchscreen-y-mm = <137>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-lilac.dts b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-lilac.dts new file mode 100644 index 000000000..fcaefc1b1 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-lilac.dts @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, AngeloGioacchino Del Regno + * + */ + +/dts-v1/; + +#include "msm8998-sony-xperia-yoshino.dtsi" + +/ { + model = "Sony Xperia XZ1 Compact"; + compatible = "sony,xperia-lilac", "qcom,msm8998"; + chassis-type = "handset"; +}; + +&ibb { + regulator-min-microvolt = <5500000>; + regulator-max-microvolt = <5500000>; +}; + +&lab { + regulator-min-microvolt = <5500000>; + regulator-max-microvolt = <5500000>; + qcom,soft-start-us = <800>; +}; + +&vreg_l22a_2p85 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; +}; + +&vreg_lvs1a_1p8 { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts new file mode 100644 index 000000000..20fe0394a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts @@ -0,0 +1,55 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, AngeloGioacchino Del Regno + * + */ + +/dts-v1/; + +#include "msm8998-sony-xperia-yoshino.dtsi" + +/ { + model = "Sony Xperia XZ Premium"; + compatible = "sony,xperia-maple", "qcom,msm8998"; + chassis-type = "handset"; + + disp_dvdd_vreg: disp-dvdd-vreg { + compatible = "regulator-fixed"; + regulator-name = "disp_dvdd_en"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + startup-delay-us = <0>; + enable-active-high; + gpio = <&pmi8998_gpio 10 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&disp_dvdd_en>; + }; +}; + +&ibb { + regulator-min-microvolt = <5600000>; + regulator-max-microvolt = <5600000>; +}; + +&lab { + regulator-min-microvolt = <5800000>; + regulator-max-microvolt = <5800000>; + qcom,soft-start-us = <200>; +}; + +&pmi8998_gpio { + disp_dvdd_en: disp-dvdd-en-active-state { + pins = "gpio10"; + function = "normal"; + bias-disable; + drive-push-pull; + output-high; + power-source = <0>; + qcom,drive-strength = <1>; + }; +}; + +&vreg_l22a_2p85 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-poplar.dts b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-poplar.dts new file mode 100644 index 000000000..c21333aa7 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-poplar.dts @@ -0,0 +1,38 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, AngeloGioacchino Del Regno + * + */ + +/dts-v1/; + +#include "msm8998-sony-xperia-yoshino.dtsi" + +/ { + model = "Sony Xperia XZ1"; + compatible = "sony,xperia-poplar", "qcom,msm8998"; + chassis-type = "handset"; +}; + +&ibb { + regulator-min-microvolt = <5600000>; + regulator-max-microvolt = <5600000>; +}; + +&lab { + regulator-min-microvolt = <5600000>; + regulator-max-microvolt = <5600000>; + qcom,soft-start-us = <800>; +}; + +&vreg_l18a_2p85 { + /* Note: Round-down from 2850000 to be a multiple of PLDO step-size 8000 */ + regulator-min-microvolt = <2848000>; + regulator-max-microvolt = <2848000>; +}; + +&vreg_l22a_2p85 { + /* Note: Round-down from 2700000 to be a multiple of PLDO step-size 8000 */ + regulator-min-microvolt = <2696000>; + regulator-max-microvolt = <2696000>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi new file mode 100644 index 000000000..d08639082 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi @@ -0,0 +1,708 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, AngeloGioacchino Del Regno + * + * Copyright (c) 2021, Konrad Dybcio + */ + +#include +#include +#include +#include "msm8998.dtsi" +#include "pm8005.dtsi" +#include "pm8998.dtsi" +#include "pmi8998.dtsi" + +/ { + /* required for bootloader to select correct board */ + qcom,msm-id = <0x124 0x20000>, <0x124 0x20001>; /* 8998v2, v2.1 */ + qcom,board-id = <8 0>; + + clocks { + div1_mclk: divclk1 { + compatible = "gpio-gate-clock"; + pinctrl-0 = <&audio_mclk_pin>; + pinctrl-names = "default"; + clocks = <&rpmcc RPM_SMD_DIV_CLK1>; + #clock-cells = <0>; + enable-gpios = <&pm8998_gpio 13 GPIO_ACTIVE_HIGH>; + }; + }; + + board_vbat: vbat-regulator { + compatible = "regulator-fixed"; + regulator-name = "VBAT"; + + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <4000000>; + regulator-always-on; + regulator-boot-on; + }; + + cam0_vdig_vreg: cam0-vdig { + compatible = "regulator-fixed"; + regulator-name = "cam0_vdig"; + startup-delay-us = <0>; + enable-active-high; + gpio = <&tlmm 21 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cam0_vdig_default>; + }; + + cam1_vdig_vreg: cam1-vdig { + compatible = "regulator-fixed"; + regulator-name = "cam1_vdig"; + startup-delay-us = <0>; + enable-active-high; + gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cam1_vdig_default>; + vin-supply = <&vreg_s3a_1p35>; + }; + + cam_vio_vreg: cam-vio-vreg { + compatible = "regulator-fixed"; + regulator-name = "cam_vio_vreg"; + startup-delay-us = <0>; + enable-active-high; + gpio = <&pmi8998_gpio 1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cam_vio_default>; + vin-supply = <&vreg_lvs1a_1p8>; + }; + + touch_vddio_vreg: touch-vddio-vreg { + compatible = "regulator-fixed"; + regulator-name = "touch_vddio_vreg"; + startup-delay-us = <10000>; + gpio = <&tlmm 133 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_vddio_en>; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + }; + + extcon_usb: extcon-usb { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&tlmm 38 GPIO_ACTIVE_HIGH>; + vbus-gpio = <&tlmm 128 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_extcon_active &usb_vbus_active>; + }; + + gpio-keys { + compatible = "gpio-keys"; + label = "Side buttons"; + pinctrl-names = "default"; + pinctrl-0 = <&vol_down_pin_a>, <&cam_focus_pin_a>, + <&cam_snapshot_pin_a>; + button-vol-down { + label = "Volume Down"; + gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>; + linux,input-type = ; + linux,code = ; + gpio-key,wakeup; + debounce-interval = <15>; + }; + + button-camera-snapshot { + label = "Camera Snapshot"; + gpios = <&pm8998_gpio 7 GPIO_ACTIVE_LOW>; + linux,input-type = ; + linux,code = ; + debounce-interval = <15>; + }; + + button-camera-focus { + label = "Camera Focus"; + gpios = <&pm8998_gpio 8 GPIO_ACTIVE_LOW>; + linux,input-type = ; + linux,code = ; + debounce-interval = <15>; + }; + }; + + gpio-hall-sensor { + compatible = "gpio-keys"; + label = "Hall sensors"; + pinctrl-names = "default"; + pinctrl-0 = <&hall_sensor0_default>; + + event-hall-sensor0 { + label = "Cover Hall Sensor"; + gpios = <&tlmm 124 GPIO_ACTIVE_LOW>; + linux,input-type = ; + linux,code = ; + gpio-key,wakeup; + debounce-interval = <30>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: memory@85800000 { + reg = <0x0 0x85800000 0x0 0x3700000>; + no-map; + }; + + cont_splash_mem: memory@9d400000 { + reg = <0x0 0x9d400000 0x0 0x2400000>; + no-map; + }; + + zap_shader_region: memory@f6400000 { + compatible = "shared-dma-pool"; + reg = <0x0 0xf6400000 0x0 0x2000>; + no-map; + }; + + adsp_region: memory@fe000000 { + reg = <0x0 0xfe000000 0x0 0x800000>; + no-map; + }; + + qseecom_region: memory@fe800000 { + reg = <0x0 0xfe800000 0x0 0x1400000>; + no-map; + }; + + ramoops@ffc00000 { + compatible = "ramoops"; + reg = <0x0 0xffc00000 0x0 0x100000>; + record-size = <0x10000>; + console-size = <0x60000>; + ftrace-size = <0x10000>; + pmsg-size = <0x20000>; + ecc-size = <16>; + }; + }; + + vibrator { + compatible = "gpio-vibrator"; + enable-gpios = <&pmi8998_gpio 5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vib_default>; + }; +}; + +&blsp1_i2c5 { + status = "okay"; + clock-frequency = <355000>; + + touchscreen@2c { + compatible = "syna,rmi4-i2c"; + reg = <0x2c>; + #address-cells = <1>; + #size-cells = <0>; + interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_n>; + + vdd-supply = <&vreg_l28_3p0>; + vio-supply = <&touch_vddio_vreg>; + + syna,reset-delay-ms = <220>; + syna,startup-delay-ms = <1000>; + + rmi4-f01@1 { + reg = <0x01>; + syna,nosleep-mode = <1>; + }; + + rmi4-f11@11 { + reg = <0x11>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp1_i2c5_sleep { + bias-disable; +}; + +&blsp1_uart3 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + max-speed = <3200000>; + + clocks = <&rpmcc RPM_SMD_RF_CLK2_PIN>; + }; +}; + +&blsp2_uart1 { + status = "okay"; +}; + +&blsp2_i2c2 { + status = "okay"; + + proximity@29 { + compatible = "st,vl53l0x"; + reg = <0x29>; + + interrupt-parent = <&tlmm>; + interrupts = <22 IRQ_TYPE_EDGE_FALLING>; + + reset-gpios = <&tlmm 27 GPIO_ACTIVE_LOW>; + vdd-supply = <&cam_vio_vreg>; + + pinctrl-names = "default"; + pinctrl-0 = <&tof_int &tof_reset>; + }; +}; + +&ibb { + regulator-min-microamp = <800000>; + regulator-max-microamp = <800000>; + regulator-enable-ramp-delay = <200>; + regulator-over-current-protection; + regulator-pull-down; + regulator-ramp-delay = <1>; + regulator-settling-time-up-us = <600>; + regulator-settling-time-down-us = <1000>; + regulator-soft-start; + qcom,discharge-resistor-kohms = <300>; +}; + +&lab { + regulator-min-microamp = <200000>; + regulator-max-microamp = <200000>; + regulator-enable-ramp-delay = <500>; + regulator-over-current-protection; + regulator-pull-down; + regulator-ramp-delay = <1>; + regulator-settling-time-up-us = <50000>; + regulator-settling-time-down-us = <3000>; + regulator-soft-start; +}; + +&pm8005_regulators { + /* VDD_GFX supply */ + pm8005_s1: s1 { + regulator-min-microvolt = <524000>; + regulator-max-microvolt = <1088000>; + regulator-enable-ramp-delay = <500>; + /* Hack until we rig up the gpu consumer */ + regulator-always-on; + }; +}; + +&pm8998_gpio { + vol_down_pin_a: vol-down-active-state { + pins = "gpio5"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-pull-up; + input-enable; + qcom,drive-strength = ; + }; + + cam_focus_pin_a: cam-focus-btn-active-state { + pins = "gpio7"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-pull-up; + input-enable; + qcom,drive-strength = ; + }; + + cam_snapshot_pin_a: cam-snapshot-btn-active-state { + pins = "gpio8"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-pull-up; + input-enable; + qcom,drive-strength = ; + }; + + audio_mclk_pin: audio-mclk-pin-active-state { + pins = "gpio13"; + function = "func2"; + power-source = <0>; + }; +}; + +&pmi8998_gpio { + cam_vio_default: cam-vio-active-state { + pins = "gpio1"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-disable; + drive-push-pull; + output-low; + qcom,drive-strength = ; + power-source = <1>; + }; + + vib_default: vib-en-state { + pins = "gpio5"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-disable; + drive-push-pull; + output-low; + qcom,drive-strength = ; + power-source = <0>; + }; +}; + +&pm8998_pon { + resin { + compatible = "qcom,pm8941-resin"; + interrupts = ; + debounce = <15625>; + bias-pull-up; + linux,code = ; + }; +}; + +&qusb2phy { + status = "okay"; + + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; +}; + +&rpm_requests { + pm8998-regulators { + compatible = "qcom,rpm-pm8998-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_s8-supply = <&vph_pwr>; + vdd_s9-supply = <&vph_pwr>; + vdd_s10-supply = <&vph_pwr>; + vdd_s11-supply = <&vph_pwr>; + vdd_s12-supply = <&vph_pwr>; + vdd_s13-supply = <&vph_pwr>; + vdd_l1_l27-supply = <&vreg_s7a_1p025>; + vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>; + vdd_l3_l11-supply = <&vreg_s7a_1p025>; + vdd_l4_l5-supply = <&vreg_s7a_1p025>; + vdd_l6-supply = <&vreg_s5a_2p04>; + vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>; + vdd_l9-supply = <&vreg_bob>; + vdd_l10_l23_l25-supply = <&vreg_bob>; + vdd_l13_l19_l21-supply = <&vreg_bob>; + vdd_l16_l28-supply = <&vreg_bob>; + vdd_l18_l22-supply = <&vreg_bob>; + vdd_l20_l24-supply = <&vreg_bob>; + vdd_l26-supply = <&vreg_s3a_1p35>; + vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p35: s3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + vreg_s4a_1p8: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-system-load = <100000>; + regulator-allow-set-load; + }; + vreg_s5a_2p04: s5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2032000>; + }; + vreg_s7a_1p025: s7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + vreg_l1a_0p875: l1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-system-load = <73400>; + regulator-allow-set-load; + }; + vreg_l2a_1p2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-system-load = <12560>; + regulator-allow-set-load; + }; + vreg_l3a_1p0: l3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l5a_0p8: l5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + vreg_l6a_1p8: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l7a_1p8: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l8a_1p2: l8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + vreg_l9a_1p8: l9 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + vreg_l10a_1p8: l10 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + vreg_l11a_1p0: l11 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l12a_1p8: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l13a_2p95: l13 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + regulator-allow-set-load; + }; + vreg_l14a_1p85: l14 { + regulator-min-microvolt = <1848000>; + regulator-max-microvolt = <1856000>; + regulator-system-load = <32000>; + regulator-allow-set-load; + }; + vreg_l15a_1p8: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l16a_2p7: l16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + }; + vreg_l17a_1p3: l17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + }; + vreg_l18a_2p85: l18 {}; + vreg_l19a_2p7: l19 { + regulator-min-microvolt = <2696000>; + regulator-max-microvolt = <2704000>; + }; + vreg_l20a_2p95: l20 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-system-load = <10000>; + regulator-allow-set-load; + }; + vreg_l21a_2p95: l21 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-system-load = <800000>; + regulator-allow-set-load; + }; + vreg_l22a_2p85: l22 { }; + vreg_l23a_3p3: l23 { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3312000>; + }; + vreg_l24a_3p075: l24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + }; + vreg_l25a_3p3: l25 { + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3312000>; + }; + vreg_l26a_1p2: l26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-allow-set-load; + }; + vreg_l28_3p0: l28 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + vreg_lvs1a_1p8: lvs1 { }; + vreg_lvs2a_1p8: lvs2 { }; + }; + + pmi8998-regulators { + compatible = "qcom,rpm-pmi8998-regulators"; + + vdd_bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3600000>; + }; + }; +}; + +&sdhc2 { + status = "okay"; + cd-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>; + + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vreg_l13a_2p95>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on &sdc2_cd>; + pinctrl-1 = <&sdc2_off &sdc2_cd>; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <81 4>; + + mdp_vsync_n: mdp-vsync-n { + pins = "gpio10"; + function = "mdp_vsync_a"; + drive-strength = <2>; + bias-pull-down; + }; + + nfc_ven: nfc-ven { + pins = "gpio12"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + output-low; + }; + + msm_mclk0_default: msm-mclk0-active { + pins = "gpio13"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + + msm_mclk1_default: msm-mclk1-active { + pins = "gpio14"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + + cci0_default: cci0-default { + pins = "gpio18", "gpio19"; + function = "cci_i2c"; + bias-disable; + drive-strength = <2>; + }; + + cci1_default: cci1-default { + pins = "gpio19", "gpio20"; + function = "cci_i2c"; + bias-disable; + drive-strength = <2>; + }; + + cam0_vdig_default: cam0-vdig-default { + pins = "gpio21"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + + tof_int: tof-int { + pins = "gpio22"; + function = "gpio"; + bias-pull-up; + drive-strength = <2>; + input-enable; + }; + + cam1_vdig_default: cam1-vdig-default { + pins = "gpio25"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + + usb_extcon_active: usb-extcon-active { + pins = "gpio38"; + function = "gpio"; + bias-disable; + drive-strength = <16>; + }; + + tof_reset: tof-reset { + pins = "gpio27"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + + hall_sensor0_default: acc-cover-open { + pins = "gpio124"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + input-enable; + }; + + ts_int_n: ts-int-n { + pins = "gpio125"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + usb_vbus_active: usb-vbus-active { + pins = "gpio128"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + output-low; + }; + + ts_vddio_en: ts-vddio-en-default { + pins = "gpio133"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + output-low; + }; +}; + +/* + * WARNING: + * Disable UFS until card quirks are in to avoid unrecoverable hard-brick + * that would happen as soon as the UFS card gets probed as, without the + * required quirks, the bootloader will be erased right after card probe. + */ +&ufshc { + status = "disabled"; +}; + +&ufsphy { + status = "disabled"; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + /* Force to peripheral until we have Type-C hooked up */ + dr_mode = "peripheral"; + extcon = <&extcon_usb>; +}; + +&usb3phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l2a_1p2>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi new file mode 100644 index 000000000..b00b8164c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -0,0 +1,2590 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2016, The Linux Foundation. All rights reserved. */ + +#include +#include +#include +#include +#include +#include +#include + +/ { + interrupt-parent = <&intc>; + + qcom,msm-id = <292 0x0>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the reg */ + reg = <0x0 0x80000000 0x0 0x0>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: memory@85800000 { + reg = <0x0 0x85800000 0x0 0x600000>; + no-map; + }; + + xbl_mem: memory@85e00000 { + reg = <0x0 0x85e00000 0x0 0x100000>; + no-map; + }; + + smem_mem: smem-mem@86000000 { + reg = <0x0 0x86000000 0x0 0x200000>; + no-map; + }; + + tz_mem: memory@86200000 { + reg = <0x0 0x86200000 0x0 0x2d00000>; + no-map; + }; + + rmtfs_mem: memory@88f00000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x88f00000 0x0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + + spss_mem: memory@8ab00000 { + reg = <0x0 0x8ab00000 0x0 0x700000>; + no-map; + }; + + adsp_mem: memory@8b200000 { + reg = <0x0 0x8b200000 0x0 0x1a00000>; + no-map; + }; + + mpss_mem: memory@8cc00000 { + reg = <0x0 0x8cc00000 0x0 0x7000000>; + no-map; + }; + + venus_mem: memory@93c00000 { + reg = <0x0 0x93c00000 0x0 0x500000>; + no-map; + }; + + mba_mem: memory@94100000 { + reg = <0x0 0x94100000 0x0 0x200000>; + no-map; + }; + + slpi_mem: memory@94300000 { + reg = <0x0 0x94300000 0x0 0xf00000>; + no-map; + }; + + ipa_fw_mem: memory@95200000 { + reg = <0x0 0x95200000 0x0 0x10000>; + no-map; + }; + + ipa_gsi_mem: memory@95210000 { + reg = <0x0 0x95210000 0x0 0x5000>; + no-map; + }; + + gpu_mem: memory@95600000 { + reg = <0x0 0x95600000 0x0 0x100000>; + no-map; + }; + + wlan_msa_mem: memory@95700000 { + reg = <0x0 0x95700000 0x0 0x100000>; + no-map; + }; + }; + + clocks { + xo: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + clock-output-names = "xo_board"; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32764>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo280"; + reg = <0x0 0x0>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "qcom,kryo280"; + reg = <0x0 0x1>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; + next-level-cache = <&L2_0>; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "qcom,kryo280"; + reg = <0x0 0x2>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; + next-level-cache = <&L2_0>; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "qcom,kryo280"; + reg = <0x0 0x3>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; + next-level-cache = <&L2_0>; + }; + + CPU4: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo280"; + reg = <0x0 0x100>; + enable-method = "psci"; + capacity-dmips-mhz = <1536>; + cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; + next-level-cache = <&L2_1>; + L2_1: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + CPU5: cpu@101 { + device_type = "cpu"; + compatible = "qcom,kryo280"; + reg = <0x0 0x101>; + enable-method = "psci"; + capacity-dmips-mhz = <1536>; + cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; + next-level-cache = <&L2_1>; + }; + + CPU6: cpu@102 { + device_type = "cpu"; + compatible = "qcom,kryo280"; + reg = <0x0 0x102>; + enable-method = "psci"; + capacity-dmips-mhz = <1536>; + cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; + next-level-cache = <&L2_1>; + }; + + CPU7: cpu@103 { + device_type = "cpu"; + compatible = "qcom,kryo280"; + reg = <0x0 0x103>; + enable-method = "psci"; + capacity-dmips-mhz = <1536>; + cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; + next-level-cache = <&L2_1>; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + }; + + cluster1 { + core0 { + cpu = <&CPU4>; + }; + + core1 { + cpu = <&CPU5>; + }; + + core2 { + cpu = <&CPU6>; + }; + + core3 { + cpu = <&CPU7>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "little-retention"; + /* CPU Retention (C2D), L2 Active */ + arm,psci-suspend-param = <0x00000002>; + entry-latency-us = <81>; + exit-latency-us = <86>; + min-residency-us = <504>; + }; + + LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 { + compatible = "arm,idle-state"; + idle-state-name = "little-power-collapse"; + /* CPU + L2 Power Collapse (C3, D4) */ + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <814>; + exit-latency-us = <4562>; + min-residency-us = <9183>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "big-retention"; + /* CPU Retention (C2D), L2 Active */ + arm,psci-suspend-param = <0x00000002>; + entry-latency-us = <79>; + exit-latency-us = <82>; + min-residency-us = <1302>; + }; + + BIG_CPU_SLEEP_1: cpu-sleep-1-1 { + compatible = "arm,idle-state"; + idle-state-name = "big-power-collapse"; + /* CPU + L2 Power Collapse (C3, D4) */ + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <724>; + exit-latency-us = <2027>; + min-residency-us = <9419>; + local-timer-stop; + }; + }; + }; + + firmware { + scm { + compatible = "qcom,scm-msm8998", "qcom,scm"; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + rpm-glink { + compatible = "qcom,glink-rpm"; + + interrupts = ; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + mboxes = <&apcs_glb 0>; + + rpm_requests: rpm-requests { + compatible = "qcom,rpm-msm8998"; + qcom,glink-channels = "rpm_requests"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-msm8998", "qcom,rpmcc"; + #clock-cells = <1>; + }; + + rpmpd: power-controller { + compatible = "qcom,msm8998-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp_ret: opp1 { + opp-level = ; + }; + + rpmpd_opp_ret_plus: opp2 { + opp-level = ; + }; + + rpmpd_opp_min_svs: opp3 { + opp-level = ; + }; + + rpmpd_opp_low_svs: opp4 { + opp-level = ; + }; + + rpmpd_opp_svs: opp5 { + opp-level = ; + }; + + rpmpd_opp_svs_plus: opp6 { + opp-level = ; + }; + + rpmpd_opp_nom: opp7 { + opp-level = ; + }; + + rpmpd_opp_nom_plus: opp8 { + opp-level = ; + }; + + rpmpd_opp_turbo: opp9 { + opp-level = ; + }; + + rpmpd_opp_turbo_plus: opp10 { + opp-level = ; + }; + }; + }; + }; + }; + + smem { + compatible = "qcom,smem"; + memory-region = <&smem_mem>; + hwlocks = <&tcsr_mutex 3>; + }; + + smp2p-lpass { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupts = ; + + mboxes = <&apcs_glb 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-mpss { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + interrupts = ; + mboxes = <&apcs_glb 14>; + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-slpi { + compatible = "qcom,smp2p"; + qcom,smem = <481>, <430>; + interrupts = ; + mboxes = <&apcs_glb 26>; + qcom,local-pid = <0>; + qcom,remote-pid = <3>; + + slpi_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + slpi_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + thermal-zones { + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 1>; + + trips { + cpu0_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_crit: cpu_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 2>; + + trips { + cpu1_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_crit: cpu_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 3>; + + trips { + cpu2_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_crit: cpu_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 4>; + + trips { + cpu3_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_crit: cpu_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu4-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 7>; + + trips { + cpu4_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_crit: cpu_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu5-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 8>; + + trips { + cpu5_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_crit: cpu_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu6-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 9>; + + trips { + cpu6_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_crit: cpu_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu7-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 10>; + + trips { + cpu7_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_crit: cpu_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + gpu-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 12>; + + trips { + gpu1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + gpu-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 13>; + + trips { + gpu2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + clust0-mhm-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 5>; + + trips { + cluster0_mhm_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + clust1-mhm-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 6>; + + trips { + cluster1_mhm_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + cluster1-l2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 11>; + + trips { + cluster1_l2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + modem-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 1>; + + trips { + modem_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + mem-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 2>; + + trips { + mem_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + wlan-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 3>; + + trips { + wlan_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + q6-dsp-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 4>; + + trips { + q6_dsp_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + camera-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 5>; + + trips { + camera_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + multimedia-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 6>; + + trips { + multimedia_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; + + soc: soc { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + compatible = "simple-bus"; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-msm8998"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0x00100000 0xb0000>; + + clock-names = "xo", "sleep_clk"; + clocks = <&xo>, <&sleep_clk>; + + /* + * The hypervisor typically configures the memory region where these clocks + * reside as read-only for the HLOS. If the HLOS tried to enable or disable + * these clocks on a device with such configuration (e.g. because they are + * enabled but unused during boot-up), the device will most likely decide + * to reboot. + * In light of that, we are conservative here and we list all such clocks + * as protected. The board dts (or a user-supplied dts) can override the + * list of protected clocks if it differs from the norm, and it is in fact + * desired for the HLOS to manage these clocks + */ + protected-clocks = , + , + ; + }; + + rpm_msg_ram: sram@778000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0x00778000 0x7000>; + }; + + qfprom: qfprom@784000 { + compatible = "qcom,msm8998-qfprom", "qcom,qfprom"; + reg = <0x00784000 0x621c>; + #address-cells = <1>; + #size-cells = <1>; + + qusb2_hstx_trim: hstx-trim@23a { + reg = <0x23a 0x1>; + bits = <0 4>; + }; + }; + + tsens0: thermal@10ab000 { + compatible = "qcom,msm8998-tsens", "qcom,tsens-v2"; + reg = <0x010ab000 0x1000>, /* TM */ + <0x010aa000 0x1000>; /* SROT */ + #qcom,sensors = <14>; + interrupts = , + ; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal@10ae000 { + compatible = "qcom,msm8998-tsens", "qcom,tsens-v2"; + reg = <0x010ae000 0x1000>, /* TM */ + <0x010ad000 0x1000>; /* SROT */ + #qcom,sensors = <8>; + interrupts = , + ; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + anoc1_smmu: iommu@1680000 { + compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2"; + reg = <0x01680000 0x10000>; + #iommu-cells = <1>; + + #global-interrupts = <0>; + interrupts = + , + , + , + , + , + ; + }; + + anoc2_smmu: iommu@16c0000 { + compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2"; + reg = <0x016c0000 0x40000>; + #iommu-cells = <1>; + + #global-interrupts = <0>; + interrupts = + , + , + , + , + , + , + , + , + , + ; + }; + + pcie0: pci@1c00000 { + compatible = "qcom,pcie-msm8996"; + reg = <0x01c00000 0x2000>, + <0x1b000000 0xf1d>, + <0x1b000f20 0xa8>, + <0x1b100000 0x100000>; + reg-names = "parf", "dbi", "elbi", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + #address-cells = <3>; + #size-cells = <2>; + num-lanes = <1>; + phys = <&pciephy>; + phy-names = "pciephy"; + status = "disabled"; + + ranges = <0x01000000 0x0 0x00000000 0x1b200000 0x0 0x100000>, + <0x02000000 0x0 0x1b300000 0x1b300000 0x0 0xd00000>; + + #interrupt-cells = <1>; + interrupts = ; + interrupt-names = "msi"; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 135 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 136 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 138 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 139 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>; + clock-names = "pipe", "bus_master", "bus_slave", "cfg", "aux"; + + power-domains = <&gcc PCIE_0_GDSC>; + iommu-map = <0x100 &anoc1_smmu 0x1480 1>; + perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; + }; + + pcie_phy: phy@1c06000 { + compatible = "qcom,msm8998-qmp-pcie-phy"; + reg = <0x01c06000 0x18c>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + ranges; + + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_CLKREF_CLK>; + clock-names = "aux", "cfg_ahb", "ref"; + + resets = <&gcc GCC_PCIE_0_PHY_BCR>, <&gcc GCC_PCIE_PHY_BCR>; + reset-names = "phy", "common"; + + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l2a_1p2>; + + pciephy: phy@1c06800 { + reg = <0x01c06200 0x128>, <0x01c06400 0x1fc>, <0x01c06800 0x20c>; + #phy-cells = <0>; + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "pcie_0_pipe_clk_src"; + #clock-cells = <0>; + }; + }; + + ufshc: ufshc@1da4000 { + compatible = "qcom,msm8998-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; + reg = <0x01da4000 0x2500>; + interrupts = ; + phys = <&ufsphy_lanes>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + power-domains = <&gcc UFS_GDSC>; + status = "disabled"; + #reset-cells = <1>; + + clock-names = + "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + clocks = + <&gcc GCC_UFS_AXI_CLK>, + <&gcc GCC_AGGRE1_UFS_AXI_CLK>, + <&gcc GCC_UFS_AHB_CLK>, + <&gcc GCC_UFS_UNIPRO_CORE_CLK>, + <&rpmcc RPM_SMD_LN_BB_CLK1>, + <&gcc GCC_UFS_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_RX_SYMBOL_1_CLK>; + freq-table-hz = + <50000000 200000000>, + <0 0>, + <0 0>, + <37500000 150000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>; + + resets = <&gcc GCC_UFS_BCR>; + reset-names = "rst"; + }; + + ufsphy: phy@1da7000 { + compatible = "qcom,msm8998-qmp-ufs-phy"; + reg = <0x01da7000 0x18c>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + ranges; + + clock-names = + "ref", + "ref_aux"; + clocks = + <&gcc GCC_UFS_CLKREF_CLK>, + <&gcc GCC_UFS_PHY_AUX_CLK>; + + reset-names = "ufsphy"; + resets = <&ufshc 0>; + + ufsphy_lanes: phy@1da7400 { + reg = <0x01da7400 0x128>, + <0x01da7600 0x1fc>, + <0x01da7c00 0x1dc>, + <0x01da7800 0x128>, + <0x01da7a00 0x1fc>; + #phy-cells = <0>; + }; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x01f40000 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr_regs_1: syscon@1f60000 { + compatible = "qcom,msm8998-tcsr", "syscon"; + reg = <0x01f60000 0x20000>; + }; + + tlmm: pinctrl@3400000 { + compatible = "qcom,msm8998-pinctrl"; + reg = <0x03400000 0xc00000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + sdc2_on: sdc2-on { + clk { + pins = "sdc2_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd { + pins = "sdc2_cmd"; + drive-strength = <10>; + bias-pull-up; + }; + + data { + pins = "sdc2_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + sdc2_off: sdc2-off { + clk { + pins = "sdc2_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd { + pins = "sdc2_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data { + pins = "sdc2_data"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + sdc2_cd: sdc2-cd { + pins = "gpio95"; + function = "gpio"; + bias-pull-up; + drive-strength = <2>; + }; + + blsp1_uart3_on: blsp1-uart3-on { + tx { + pins = "gpio45"; + function = "blsp_uart3_a"; + drive-strength = <2>; + bias-disable; + }; + + rx { + pins = "gpio46"; + function = "blsp_uart3_a"; + drive-strength = <2>; + bias-disable; + }; + + cts { + pins = "gpio47"; + function = "blsp_uart3_a"; + drive-strength = <2>; + bias-disable; + }; + + rfr { + pins = "gpio48"; + function = "blsp_uart3_a"; + drive-strength = <2>; + bias-disable; + }; + }; + + blsp1_i2c1_default: blsp1-i2c1-default { + pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c1_sleep: blsp1-i2c1-sleep { + pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp1_i2c2_default: blsp1-i2c2-default { + pins = "gpio32", "gpio33"; + function = "blsp_i2c2"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c2_sleep: blsp1-i2c2-sleep { + pins = "gpio32", "gpio33"; + function = "blsp_i2c2"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp1_i2c3_default: blsp1-i2c3-default { + pins = "gpio47", "gpio48"; + function = "blsp_i2c3"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c3_sleep: blsp1-i2c3-sleep { + pins = "gpio47", "gpio48"; + function = "blsp_i2c3"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp1_i2c4_default: blsp1-i2c4-default { + pins = "gpio10", "gpio11"; + function = "blsp_i2c4"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c4_sleep: blsp1-i2c4-sleep { + pins = "gpio10", "gpio11"; + function = "blsp_i2c4"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp1_i2c5_default: blsp1-i2c5-default { + pins = "gpio87", "gpio88"; + function = "blsp_i2c5"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c5_sleep: blsp1-i2c5-sleep { + pins = "gpio87", "gpio88"; + function = "blsp_i2c5"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp1_i2c6_default: blsp1-i2c6-default { + pins = "gpio43", "gpio44"; + function = "blsp_i2c6"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c6_sleep: blsp1-i2c6-sleep { + pins = "gpio43", "gpio44"; + function = "blsp_i2c6"; + drive-strength = <2>; + bias-pull-up; + }; + /* 6 interfaces per QUP, BLSP2 indexes are numbered (n)+6 */ + blsp2_i2c1_default: blsp2-i2c1-default { + pins = "gpio55", "gpio56"; + function = "blsp_i2c7"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c1_sleep: blsp2-i2c1-sleep { + pins = "gpio55", "gpio56"; + function = "blsp_i2c7"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp2_i2c2_default: blsp2-i2c2-default { + pins = "gpio6", "gpio7"; + function = "blsp_i2c8"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c2_sleep: blsp2-i2c2-sleep { + pins = "gpio6", "gpio7"; + function = "blsp_i2c8"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp2_i2c3_default: blsp2-i2c3-default { + pins = "gpio51", "gpio52"; + function = "blsp_i2c9"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c3_sleep: blsp2-i2c3-sleep { + pins = "gpio51", "gpio52"; + function = "blsp_i2c9"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp2_i2c4_default: blsp2-i2c4-default { + pins = "gpio67", "gpio68"; + function = "blsp_i2c10"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c4_sleep: blsp2-i2c4-sleep { + pins = "gpio67", "gpio68"; + function = "blsp_i2c10"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp2_i2c5_default: blsp2-i2c5-default { + pins = "gpio60", "gpio61"; + function = "blsp_i2c11"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c5_sleep: blsp2-i2c5-sleep { + pins = "gpio60", "gpio61"; + function = "blsp_i2c11"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp2_i2c6_default: blsp2-i2c6-default { + pins = "gpio83", "gpio84"; + function = "blsp_i2c12"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c6_sleep: blsp2-i2c6-sleep { + pins = "gpio83", "gpio84"; + function = "blsp_i2c12"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + remoteproc_mss: remoteproc@4080000 { + compatible = "qcom,msm8998-mss-pil"; + reg = <0x04080000 0x100>, <0x04180000 0x20>; + reg-names = "qdsp6", "rmb"; + + interrupts-extended = + <&intc GIC_SPI 448 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack", + "shutdown-ack"; + + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_BIMC_MSS_Q6_AXI_CLK>, + <&gcc GCC_BOOT_ROM_AHB_CLK>, + <&gcc GCC_MSS_GPLL0_DIV_CLK_SRC>, + <&gcc GCC_MSS_SNOC_AXI_CLK>, + <&gcc GCC_MSS_MNOC_BIMC_AXI_CLK>, + <&rpmcc RPM_SMD_QDSS_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "bus", "mem", "gpll0_mss", + "snoc_axi", "mnoc_axi", "qdss", "xo"; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + resets = <&gcc GCC_MSS_RESTART>; + reset-names = "mss_restart"; + + qcom,halt-regs = <&tcsr_regs_1 0x3000 0x5000 0x4000>; + + power-domains = <&rpmpd MSM8998_VDDCX>, + <&rpmpd MSM8998_VDDMX>; + power-domain-names = "cx", "mx"; + + status = "disabled"; + + mba { + memory-region = <&mba_mem>; + }; + + mpss { + memory-region = <&mpss_mem>; + }; + + glink-edge { + interrupts = ; + label = "modem"; + qcom,remote-pid = <1>; + mboxes = <&apcs_glb 15>; + }; + }; + + adreno_gpu: gpu@5000000 { + compatible = "qcom,adreno-540.1", "qcom,adreno"; + reg = <0x05000000 0x40000>; + reg-names = "kgsl_3d0_reg_memory"; + + clocks = <&gcc GCC_GPU_CFG_AHB_CLK>, + <&gpucc RBBMTIMER_CLK>, + <&gcc GCC_BIMC_GFX_CLK>, + <&gcc GCC_GPU_BIMC_GFX_CLK>, + <&gpucc RBCPR_CLK>, + <&gpucc GFX3D_CLK>; + clock-names = "iface", + "rbbmtimer", + "mem", + "mem_iface", + "rbcpr", + "core"; + + interrupts = <0 300 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&adreno_smmu 0>; + operating-points-v2 = <&gpu_opp_table>; + power-domains = <&rpmpd MSM8998_VDDMX>; + status = "disabled"; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-710000097 { + opp-hz = /bits/ 64 <710000097>; + opp-level = ; + opp-supported-hw = <0xFF>; + }; + + opp-670000048 { + opp-hz = /bits/ 64 <670000048>; + opp-level = ; + opp-supported-hw = <0xFF>; + }; + + opp-596000097 { + opp-hz = /bits/ 64 <596000097>; + opp-level = ; + opp-supported-hw = <0xFF>; + }; + + opp-515000097 { + opp-hz = /bits/ 64 <515000097>; + opp-level = ; + opp-supported-hw = <0xFF>; + }; + + opp-414000000 { + opp-hz = /bits/ 64 <414000000>; + opp-level = ; + opp-supported-hw = <0xFF>; + }; + + opp-342000000 { + opp-hz = /bits/ 64 <342000000>; + opp-level = ; + opp-supported-hw = <0xFF>; + }; + + opp-257000000 { + opp-hz = /bits/ 64 <257000000>; + opp-level = ; + opp-supported-hw = <0xFF>; + }; + }; + }; + + adreno_smmu: iommu@5040000 { + compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2"; + reg = <0x05040000 0x10000>; + clocks = <&gcc GCC_GPU_CFG_AHB_CLK>, + <&gcc GCC_BIMC_GFX_CLK>, + <&gcc GCC_GPU_BIMC_GFX_CLK>; + clock-names = "iface", "mem", "mem_iface"; + + #global-interrupts = <0>; + #iommu-cells = <1>; + interrupts = + , + , + ; + /* + * GPU-GX GDSC's parent is GPU-CX. We need to bring up the + * GPU-CX for SMMU but we need both of them up for Adreno. + * Contemporarily, we also need to manage the VDDMX rpmpd + * domain in the Adreno driver. + * Enable GPU CX/GX GDSCs here so that we can manage the + * SoC VDDMX RPM Power Domain in the Adreno driver. + */ + power-domains = <&gpucc GPU_GX_GDSC>; + status = "disabled"; + }; + + gpucc: clock-controller@5065000 { + compatible = "qcom,msm8998-gpucc"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0x05065000 0x9000>; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&gcc GPLL0_OUT_MAIN>; + clock-names = "xo", + "gpll0"; + }; + + remoteproc_slpi: remoteproc@5800000 { + compatible = "qcom,msm8998-slpi-pas"; + reg = <0x05800000 0x4040>; + + interrupts-extended = <&intc GIC_SPI 390 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + px-supply = <&vreg_lvs2a_1p8>; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&rpmcc RPM_SMD_AGGR2_NOC_CLK>; + clock-names = "xo", "aggre2"; + + memory-region = <&slpi_mem>; + + qcom,smem-states = <&slpi_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + power-domains = <&rpmpd MSM8998_SSCCX>; + power-domain-names = "ssc_cx"; + + status = "disabled"; + + glink-edge { + interrupts = ; + label = "dsps"; + qcom,remote-pid = <3>; + mboxes = <&apcs_glb 27>; + }; + }; + + stm: stm@6002000 { + compatible = "arm,coresight-stm", "arm,primecell"; + reg = <0x06002000 0x1000>, + <0x16280000 0x180000>; + reg-names = "stm-base", "stm-stimulus-base"; + status = "disabled"; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + out-ports { + port { + stm_out: endpoint { + remote-endpoint = <&funnel0_in7>; + }; + }; + }; + }; + + funnel1: funnel@6041000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x06041000 0x1000>; + status = "disabled"; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + out-ports { + port { + funnel0_out: endpoint { + remote-endpoint = + <&merge_funnel_in0>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@7 { + reg = <7>; + funnel0_in7: endpoint { + remote-endpoint = <&stm_out>; + }; + }; + }; + }; + + funnel2: funnel@6042000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x06042000 0x1000>; + status = "disabled"; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + out-ports { + port { + funnel1_out: endpoint { + remote-endpoint = + <&merge_funnel_in1>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@6 { + reg = <6>; + funnel1_in6: endpoint { + remote-endpoint = + <&apss_merge_funnel_out>; + }; + }; + }; + }; + + funnel3: funnel@6045000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x06045000 0x1000>; + status = "disabled"; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + out-ports { + port { + merge_funnel_out: endpoint { + remote-endpoint = + <&etf_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + merge_funnel_in0: endpoint { + remote-endpoint = + <&funnel0_out>; + }; + }; + + port@1 { + reg = <1>; + merge_funnel_in1: endpoint { + remote-endpoint = + <&funnel1_out>; + }; + }; + }; + }; + + replicator1: replicator@6046000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0x06046000 0x1000>; + status = "disabled"; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + out-ports { + port { + replicator_out: endpoint { + remote-endpoint = <&etr_in>; + }; + }; + }; + + in-ports { + port { + replicator_in: endpoint { + remote-endpoint = <&etf_out>; + }; + }; + }; + }; + + etf: etf@6047000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x06047000 0x1000>; + status = "disabled"; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + out-ports { + port { + etf_out: endpoint { + remote-endpoint = + <&replicator_in>; + }; + }; + }; + + in-ports { + port { + etf_in: endpoint { + remote-endpoint = + <&merge_funnel_out>; + }; + }; + }; + }; + + etr: etr@6048000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x06048000 0x1000>; + status = "disabled"; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + arm,scatter-gather; + + in-ports { + port { + etr_in: endpoint { + remote-endpoint = + <&replicator_out>; + }; + }; + }; + }; + + etm1: etm@7840000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x07840000 0x1000>; + status = "disabled"; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU0>; + + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = + <&apss_funnel_in0>; + }; + }; + }; + }; + + etm2: etm@7940000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x07940000 0x1000>; + status = "disabled"; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU1>; + + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = + <&apss_funnel_in1>; + }; + }; + }; + }; + + etm3: etm@7a40000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x07a40000 0x1000>; + status = "disabled"; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU2>; + + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = + <&apss_funnel_in2>; + }; + }; + }; + }; + + etm4: etm@7b40000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x07b40000 0x1000>; + status = "disabled"; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU3>; + + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = + <&apss_funnel_in3>; + }; + }; + }; + }; + + funnel4: funnel@7b60000 { /* APSS Funnel */ + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x07b60000 0x1000>; + status = "disabled"; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + out-ports { + port { + apss_funnel_out: endpoint { + remote-endpoint = + <&apss_merge_funnel_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + apss_funnel_in0: endpoint { + remote-endpoint = + <&etm0_out>; + }; + }; + + port@1 { + reg = <1>; + apss_funnel_in1: endpoint { + remote-endpoint = + <&etm1_out>; + }; + }; + + port@2 { + reg = <2>; + apss_funnel_in2: endpoint { + remote-endpoint = + <&etm2_out>; + }; + }; + + port@3 { + reg = <3>; + apss_funnel_in3: endpoint { + remote-endpoint = + <&etm3_out>; + }; + }; + + port@4 { + reg = <4>; + apss_funnel_in4: endpoint { + remote-endpoint = + <&etm4_out>; + }; + }; + + port@5 { + reg = <5>; + apss_funnel_in5: endpoint { + remote-endpoint = + <&etm5_out>; + }; + }; + + port@6 { + reg = <6>; + apss_funnel_in6: endpoint { + remote-endpoint = + <&etm6_out>; + }; + }; + + port@7 { + reg = <7>; + apss_funnel_in7: endpoint { + remote-endpoint = + <&etm7_out>; + }; + }; + }; + }; + + funnel5: funnel@7b70000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x07b70000 0x1000>; + status = "disabled"; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + out-ports { + port { + apss_merge_funnel_out: endpoint { + remote-endpoint = + <&funnel1_in6>; + }; + }; + }; + + in-ports { + port { + apss_merge_funnel_in: endpoint { + remote-endpoint = + <&apss_funnel_out>; + }; + }; + }; + }; + + etm5: etm@7c40000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x07c40000 0x1000>; + status = "disabled"; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU4>; + + port{ + etm4_out: endpoint { + remote-endpoint = <&apss_funnel_in4>; + }; + }; + }; + + etm6: etm@7d40000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x07d40000 0x1000>; + status = "disabled"; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU5>; + + port{ + etm5_out: endpoint { + remote-endpoint = <&apss_funnel_in5>; + }; + }; + }; + + etm7: etm@7e40000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x07e40000 0x1000>; + status = "disabled"; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU6>; + + port{ + etm6_out: endpoint { + remote-endpoint = <&apss_funnel_in6>; + }; + }; + }; + + etm8: etm@7f40000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x07f40000 0x1000>; + status = "disabled"; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU7>; + + port{ + etm7_out: endpoint { + remote-endpoint = <&apss_funnel_in7>; + }; + }; + }; + + sram@290000 { + compatible = "qcom,rpm-stats"; + reg = <0x00290000 0x10000>; + }; + + spmi_bus: spmi@800f000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0800f000 0x1000>, + <0x08400000 0x1000000>, + <0x09400000 0x1000000>, + <0x0a400000 0x220000>, + <0x0800a000 0x3000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = ; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + cell-index = <0>; + }; + + usb3: usb@a8f8800 { + compatible = "qcom,msm8998-dwc3", "qcom,dwc3"; + reg = <0x0a8f8800 0x400>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_AXI_CLK>, + <&gcc GCC_USB30_MASTER_CLK>, + <&gcc GCC_AGGRE1_USB3_AXI_CLK>, + <&gcc GCC_USB30_SLEEP_CLK>, + <&gcc GCC_USB30_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_MASTER_CLK>; + assigned-clock-rates = <19200000>, <120000000>; + + interrupts = , + ; + interrupt-names = "hs_phy_irq", "ss_phy_irq"; + + power-domains = <&gcc USB_30_GDSC>; + + resets = <&gcc GCC_USB_30_BCR>; + + usb3_dwc3: usb@a800000 { + compatible = "snps,dwc3"; + reg = <0x0a800000 0xcd00>; + interrupts = ; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&qusb2phy>, <&usb1_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + snps,has-lpm-erratum; + snps,hird-threshold = /bits/ 8 <0x10>; + }; + }; + + usb3phy: phy@c010000 { + compatible = "qcom,msm8998-qmp-usb3-phy"; + reg = <0x0c010000 0x18c>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_USB3_PHY_AUX_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_USB3_CLKREF_CLK>; + clock-names = "aux", "cfg_ahb", "ref"; + + resets = <&gcc GCC_USB3_PHY_BCR>, + <&gcc GCC_USB3PHY_PHY_BCR>; + reset-names = "phy", "common"; + + usb1_ssphy: phy@c010200 { + reg = <0xc010200 0x128>, + <0xc010400 0x200>, + <0xc010c00 0x20c>, + <0xc010600 0x128>, + <0xc010800 0x200>; + #phy-cells = <0>; + #clock-cells = <0>; + clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_phy_pipe_clk_src"; + }; + }; + + qusb2phy: phy@c012000 { + compatible = "qcom,msm8998-qusb2-phy"; + reg = <0x0c012000 0x2a8>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_RX1_USB2_CLKREF_CLK>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + + nvmem-cells = <&qusb2_hstx_trim>; + }; + + sdhc2: mmc@c0a4900 { + compatible = "qcom,msm8998-sdhci", "qcom,sdhci-msm-v4"; + reg = <0x0c0a4900 0x314>, <0x0c0a4000 0x800>; + reg-names = "hc", "core"; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + clock-names = "iface", "core", "xo"; + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&xo>; + bus-width = <4>; + status = "disabled"; + }; + + blsp1_dma: dma-controller@c144000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x0c144000 0x25000>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + num-channels = <18>; + qcom,num-ees = <4>; + }; + + blsp1_uart3: serial@c171000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x0c171000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 4>, <&blsp1_dma 5>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_uart3_on>; + status = "disabled"; + }; + + blsp1_i2c1: i2c@c175000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c175000 0x600>; + interrupts = ; + + clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 6>, <&blsp1_dma 7>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c1_default>; + pinctrl-1 = <&blsp1_i2c1_sleep>; + clock-frequency = <400000>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_i2c2: i2c@c176000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c176000 0x600>; + interrupts = ; + + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 8>, <&blsp1_dma 9>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c2_default>; + pinctrl-1 = <&blsp1_i2c2_sleep>; + clock-frequency = <400000>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_i2c3: i2c@c177000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c177000 0x600>; + interrupts = ; + + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 10>, <&blsp1_dma 11>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c3_default>; + pinctrl-1 = <&blsp1_i2c3_sleep>; + clock-frequency = <400000>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_i2c4: i2c@c178000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c178000 0x600>; + interrupts = ; + + clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 12>, <&blsp1_dma 13>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c4_default>; + pinctrl-1 = <&blsp1_i2c4_sleep>; + clock-frequency = <400000>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_i2c5: i2c@c179000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c179000 0x600>; + interrupts = ; + + clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 14>, <&blsp1_dma 15>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c5_default>; + pinctrl-1 = <&blsp1_i2c5_sleep>; + clock-frequency = <400000>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_i2c6: i2c@c17a000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c17a000 0x600>; + interrupts = ; + + clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 16>, <&blsp1_dma 17>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c6_default>; + pinctrl-1 = <&blsp1_i2c6_sleep>; + clock-frequency = <400000>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp2_dma: dma-controller@c184000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x0c184000 0x25000>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + num-channels = <18>; + qcom,num-ees = <4>; + }; + + blsp2_uart1: serial@c1b0000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x0c1b0000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + blsp2_i2c1: i2c@c1b5000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c1b5000 0x600>; + interrupts = ; + + clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp2_dma 6>, <&blsp2_dma 7>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c1_default>; + pinctrl-1 = <&blsp2_i2c1_sleep>; + clock-frequency = <400000>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp2_i2c2: i2c@c1b6000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c1b6000 0x600>; + interrupts = ; + + clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp2_dma 8>, <&blsp2_dma 9>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c2_default>; + pinctrl-1 = <&blsp2_i2c2_sleep>; + clock-frequency = <400000>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp2_i2c3: i2c@c1b7000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c1b7000 0x600>; + interrupts = ; + + clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp2_dma 10>, <&blsp2_dma 11>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c3_default>; + pinctrl-1 = <&blsp2_i2c3_sleep>; + clock-frequency = <400000>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp2_i2c4: i2c@c1b8000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c1b8000 0x600>; + interrupts = ; + + clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp2_dma 12>, <&blsp2_dma 13>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c4_default>; + pinctrl-1 = <&blsp2_i2c4_sleep>; + clock-frequency = <400000>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp2_i2c5: i2c@c1b9000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c1b9000 0x600>; + interrupts = ; + + clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp2_dma 14>, <&blsp2_dma 15>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c5_default>; + pinctrl-1 = <&blsp2_i2c5_sleep>; + clock-frequency = <400000>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp2_i2c6: i2c@c1ba000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c1ba000 0x600>; + interrupts = ; + + clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp2_dma 16>, <&blsp2_dma 17>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c6_default>; + pinctrl-1 = <&blsp2_i2c6_sleep>; + clock-frequency = <400000>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmcc: clock-controller@c8c0000 { + compatible = "qcom,mmcc-msm8998"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0xc8c0000 0x40000>; + + clock-names = "xo", + "gpll0", + "dsi0dsi", + "dsi0byte", + "dsi1dsi", + "dsi1byte", + "hdmipll", + "dplink", + "dpvco", + "core_bi_pll_test_se"; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&gcc GCC_MMSS_GPLL0_CLK>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>; + }; + + mmss_smmu: iommu@cd00000 { + compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2"; + reg = <0x0cd00000 0x40000>; + #iommu-cells = <1>; + + clocks = <&mmcc MNOC_AHB_CLK>, + <&mmcc BIMC_SMMU_AHB_CLK>, + <&mmcc BIMC_SMMU_AXI_CLK>; + clock-names = "iface-mm", + "iface-smmu", + "bus-smmu"; + + #global-interrupts = <0>; + interrupts = + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + + power-domains = <&mmcc BIMC_SMMU_GDSC>; + }; + + remoteproc_adsp: remoteproc@17300000 { + compatible = "qcom,msm8998-adsp-pas"; + reg = <0x17300000 0x4040>; + + interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "xo"; + + memory-region = <&adsp_mem>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + power-domains = <&rpmpd MSM8998_VDDCX>; + power-domain-names = "cx"; + + status = "disabled"; + + glink-edge { + interrupts = ; + label = "lpass"; + qcom,remote-pid = <2>; + mboxes = <&apcs_glb 9>; + }; + }; + + apcs_glb: mailbox@17911000 { + compatible = "qcom,msm8998-apcs-hmss-global"; + reg = <0x17911000 0x1000>; + + #mbox-cells = <1>; + }; + + timer@17920000 { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0x17920000 0x1000>; + + frame@17921000 { + frame-number = <0>; + interrupts = , + ; + reg = <0x17921000 0x1000>, + <0x17922000 0x1000>; + }; + + frame@17923000 { + frame-number = <1>; + interrupts = ; + reg = <0x17923000 0x1000>; + status = "disabled"; + }; + + frame@17924000 { + frame-number = <2>; + interrupts = ; + reg = <0x17924000 0x1000>; + status = "disabled"; + }; + + frame@17925000 { + frame-number = <3>; + interrupts = ; + reg = <0x17925000 0x1000>; + status = "disabled"; + }; + + frame@17926000 { + frame-number = <4>; + interrupts = ; + reg = <0x17926000 0x1000>; + status = "disabled"; + }; + + frame@17927000 { + frame-number = <5>; + interrupts = ; + reg = <0x17927000 0x1000>; + status = "disabled"; + }; + + frame@17928000 { + frame-number = <6>; + interrupts = ; + reg = <0x17928000 0x1000>; + status = "disabled"; + }; + }; + + intc: interrupt-controller@17a00000 { + compatible = "arm,gic-v3"; + reg = <0x17a00000 0x10000>, /* GICD */ + <0x17b00000 0x100000>; /* GICR * 8 */ + #interrupt-cells = <3>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + interrupt-controller; + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x20000>; + interrupts = ; + }; + + wifi: wifi@18800000 { + compatible = "qcom,wcn3990-wifi"; + status = "disabled"; + reg = <0x18800000 0x800000>; + reg-names = "membase"; + memory-region = <&wlan_msa_mem>; + clocks = <&rpmcc RPM_SMD_RF_CLK2_PIN>; + clock-names = "cxo_ref_clk_pin"; + interrupts = + , + , + , + , + , + , + , + , + , + , + , + ; + iommus = <&anoc2_smmu 0x1900>, + <&anoc2_smmu 0x1901>; + qcom,snoc-host-cap-8bit-quirk; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm6150.dtsi b/arch/arm64/boot/dts/qcom/pm6150.dtsi new file mode 100644 index 000000000..8a4972e6a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm6150.dtsi @@ -0,0 +1,106 @@ +// SPDX-License-Identifier: BSD-3-Clause +// Copyright (c) 2019, The Linux Foundation. All rights reserved. + +#include +#include +#include +#include +#include + +/ { + thermal-zones { + pm6150_thermal: pm6150-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pm6150_temp>; + + trips { + pm6150_trip0: trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + pm6150_crit: crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus { + pm6150_lsid0: pmic@0 { + compatible = "qcom,pm6150", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm6150_pon: pon@800 { + compatible = "qcom,pm8998-pon"; + reg = <0x800>; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; + + pm6150_pwrkey: pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = ; + }; + }; + + pm6150_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>; + io-channels = <&pm6150_adc ADC5_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pm6150_adc: adc@3100 { + compatible = "qcom,spmi-adc5"; + reg = <0x3100>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + adc-chan@6 { + reg = ; + label = "die_temp"; + }; + }; + + pm6150_adc_tm: adc-tm@3500 { + compatible = "qcom,spmi-adc-tm5"; + reg = <0x3500>; + interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pm6150_gpio: gpios@c000 { + compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pm6150_gpio 0 0 10>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pm6150_lsid1: pmic@1 { + compatible = "qcom,pm6150", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm6150l.dtsi b/arch/arm64/boot/dts/qcom/pm6150l.dtsi new file mode 100644 index 000000000..06d729ff6 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm6150l.dtsi @@ -0,0 +1,86 @@ +// SPDX-License-Identifier: BSD-3-Clause +// Copyright (c) 2019, The Linux Foundation. All rights reserved. + +#include +#include +#include + +&spmi_bus { + pm6150l_lsid4: pmic@4 { + compatible = "qcom,pm6150l", "qcom,spmi-pmic"; + reg = <0x4 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm6150l_adc: adc@3100 { + compatible = "qcom,spmi-adc5"; + reg = <0x3100>; + interrupts = <0x4 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + adc-chan@0 { + reg = ; + qcom,pre-scaling = <1 1>; + label = "ref_gnd"; + }; + + adc-chan@1 { + reg = ; + qcom,pre-scaling = <1 1>; + label = "vref_1p25"; + }; + + adc-chan@6 { + reg = ; + qcom,pre-scaling = <1 1>; + label = "die_temp"; + }; + + adc-chan@83 { + reg = ; + qcom,pre-scaling = <1 3>; + label = "vph_pwr"; + }; + }; + + pm6150l_adc_tm: adc-tm@3500 { + compatible = "qcom,spmi-adc-tm5"; + reg = <0x3500>; + interrupts = <0x4 0x35 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pm6150l_gpio: gpios@c000 { + compatible = "qcom,pm6150l-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pm6150l_gpio 0 0 12>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pm6150l_lsid5: pmic@5 { + compatible = "qcom,pm6150l", "qcom,spmi-pmic"; + reg = <0x5 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm6150l_wled: leds@d800 { + compatible = "qcom,pm6150l-wled"; + reg = <0xd800>, <0xd900>; + interrupts = <0x5 0xd8 0x1 IRQ_TYPE_EDGE_RISING>, + <0x5 0xd8 0x2 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ovp", "short"; + label = "backlight"; + + status = "disabled"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm6350.dtsi b/arch/arm64/boot/dts/qcom/pm6350.dtsi new file mode 100644 index 000000000..68245d78d --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm6350.dtsi @@ -0,0 +1,56 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Luca Weiss + */ + +#include +#include + +&spmi_bus { + pmic@0 { + compatible = "qcom,pm6350", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm6350_pon: pon@800 { + compatible = "qcom,pm8998-pon"; + reg = <0x800>; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; + + pm6350_pwrkey: pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0x0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = ; + }; + + pm6350_resin: resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 0x1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + status = "disabled"; + }; + }; + + pm6350_gpios: gpios@c000 { + compatible = "qcom,pm6350-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pm6350_gpios 0 0 9>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmic@1 { + compatible = "qcom,pm6350", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm660.dtsi b/arch/arm64/boot/dts/qcom/pm660.dtsi new file mode 100644 index 000000000..02a69ac01 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm660.dtsi @@ -0,0 +1,194 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio + */ + +#include +#include +#include +#include +#include + +/ { + thermal-zones { + pm660 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&pm660_temp>; + + trips { + pm660_alert0: pm660-alert0 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + pm660_crit: pm660-crit { + temperature = <125000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus { + + pmic@0 { + compatible = "qcom,pm660", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>, <0x6100>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; + }; + + pon: pon@800 { + compatible = "qcom,pm8998-pon"; + reg = <0x800>; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; + + pon_pwrkey: pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = ; + + status = "disabled"; + }; + + pon_resin: resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + + status = "disabled"; + }; + }; + + pm660_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>; + io-channels = <&pm660_adc ADC5_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pm660_adc: adc@3100 { + compatible = "qcom,spmi-adc-rev2"; + reg = <0x3100>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + ref_gnd: ref_gnd@0 { + reg = ; + qcom,decimation = <1024>; + qcom,pre-scaling = <1 1>; + }; + + vref_1p25: vref_1p25@1 { + reg = ; + qcom,decimation = <1024>; + qcom,pre-scaling = <1 1>; + }; + + die_temp: die_temp@6 { + reg = ; + qcom,decimation = <1024>; + qcom,pre-scaling = <1 1>; + }; + + xo_therm: xo_therm@4c { + reg = ; + qcom,pre-scaling = <1 1>; + qcom,decimation = <1024>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + }; + + msm_therm: msm_therm@4d { + reg = ; + qcom,pre-scaling = <1 1>; + qcom,decimation = <1024>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + }; + + emmc_therm: emmc_therm@4e { + reg = ; + qcom,pre-scaling = <1 1>; + qcom,decimation = <1024>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + }; + + pa_therm0: thermistor0@4f { + reg = ; + qcom,pre-scaling = <1 1>; + qcom,decimation = <1024>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + }; + + pa_therm1: thermistor1@50 { + reg = ; + qcom,pre-scaling = <1 1>; + qcom,decimation = <1024>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + }; + + quiet_therm: quiet_therm@51 { + reg = ; + qcom,pre-scaling = <1 1>; + qcom,decimation = <1024>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + }; + + vadc_vph_pwr: vph_pwr@83 { + reg = ; + qcom,decimation = <1024>; + qcom,pre-scaling = <1 3>; + }; + + vcoin: vcoin@85 { + reg = ; + qcom,decimation = <1024>; + qcom,pre-scaling = <1 3>; + }; + }; + + pm660_gpios: gpios@c000 { + compatible = "qcom,pm660-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pm660_gpios 0 0 13>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmic@1 { + compatible = "qcom,pm660", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm660_spmi_regulators: regulators { + compatible = "qcom,pm660-regulators"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm660l.dtsi b/arch/arm64/boot/dts/qcom/pm660l.dtsi new file mode 100644 index 000000000..88606b996 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm660l.dtsi @@ -0,0 +1,90 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio + */ + +#include +#include +#include +#include +#include + +/ { + thermal-zones { + pm660l { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&pm660l_temp>; + + trips { + pm660l_alert0: pm660l-alert0 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + pm660l_crit: pm660l-crit { + temperature = <125000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus { + + pmic@2 { + compatible = "qcom,pm660l", "qcom,spmi-pmic"; + reg = <0x2 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm660l_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x2 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pm660l_gpios: gpios@c000 { + compatible = "qcom,pm660l-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pm660l_gpios 0 0 12>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmic@3 { + compatible = "qcom,pm660l", "qcom,spmi-pmic"; + reg = <0x3 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm660l_lpg: pwm { + compatible = "qcom,pm660l-lpg"; + + status = "disabled"; + }; + + pm660l_wled: leds@d800 { + compatible = "qcom,pm660l-wled"; + reg = <0xd800>, <0xd900>; + interrupts = <0x3 0xd8 0x1 IRQ_TYPE_EDGE_RISING>, + <0x3 0xd8 0x2 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ovp", "short"; + label = "backlight"; + + status = "disabled"; + }; + + pm660l_spmi_regulators: regulators { + compatible = "qcom,pm660l-regulators"; + }; + }; +}; + diff --git a/arch/arm64/boot/dts/qcom/pm7250b.dtsi b/arch/arm64/boot/dts/qcom/pm7250b.dtsi new file mode 100644 index 000000000..694fe9125 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm7250b.dtsi @@ -0,0 +1,150 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (C) 2022 Luca Weiss + */ + +#include +#include +#include + +/ { + thermal-zones { + pm7250b-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pm7250b_temp>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + + trip2 { + temperature = <145000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus { + pmic@2 { + compatible = "qcom,pm7250b", "qcom,spmi-pmic"; + reg = <0x2 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm7250b_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x2 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + io-channels = <&pm7250b_adc ADC5_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pm7250b_adc: adc@3100 { + compatible = "qcom,spmi-adc5"; + reg = <0x3100>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + + adc-chan@0 { + reg = ; + qcom,pre-scaling = <1 1>; + label = "ref_gnd"; + }; + + adc-chan@1 { + reg = ; + qcom,pre-scaling = <1 1>; + label = "vref_1p25"; + }; + + adc-chan@2 { + reg = ; + qcom,pre-scaling = <1 1>; + label = "die_temp"; + }; + + adc-chan@7 { + reg = ; + qcom,pre-scaling = <1 1>; + label = "usb_in_i_uv"; + }; + + adc-chan@8 { + reg = ; + qcom,pre-scaling = <1 16>; + label = "usb_in_v_div_16"; + }; + + adc-chan@9 { + reg = ; + qcom,pre-scaling = <1 1>; + label = "chg_temp"; + }; + + adc-chan@e { + reg = ; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "smb1390_therm"; + }; + + adc-chan@1e { + reg = ; + qcom,pre-scaling = <1 6>; + label = "chg_mid"; + }; + + adc-chan@83 { + reg = ; + qcom,pre-scaling = <1 3>; + label = "vph_pwr"; + }; + + adc-chan@84 { + reg = ; + qcom,pre-scaling = <1 3>; + label = "vbat_sns"; + }; + + adc-chan@99 { + reg = ; + qcom,pre-scaling = <1 3>; + label = "chg_sbux"; + }; + }; + + pm7250b_adc_tm: adc-tm@3500 { + compatible = "qcom,spmi-adc-tm5"; + reg = <0x3500>; + interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + pmic@3 { + compatible = "qcom,pm7250b", "qcom,spmi-pmic"; + reg = <0x3 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm7325.dtsi b/arch/arm64/boot/dts/qcom/pm7325.dtsi new file mode 100644 index 000000000..e7f64a9dd --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm7325.dtsi @@ -0,0 +1,53 @@ +// SPDX-License-Identifier: BSD-3-Clause +// Copyright (c) 2021, The Linux Foundation. All rights reserved. + +#include +#include + +&spmi_bus { + pm7325: pmic@1 { + compatible = "qcom,pm7325", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm7325_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pm7325_gpios: gpios@8800 { + compatible = "qcom,pm7325-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pm7325_gpios 0 0 10>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; + +&thermal_zones { + pm7325_thermal: pm7325-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pm7325_temp_alarm>; + + trips { + pm7325_trip0: trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + pm7325_crit: pm7325-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm8004.dtsi b/arch/arm64/boot/dts/qcom/pm8004.dtsi new file mode 100644 index 000000000..532b79acf --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm8004.dtsi @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: GPL-2.0 +#include +#include + +&spmi_bus { + + pm8004_lsid4: pmic@4 { + compatible = "qcom,pm8004", "qcom,spmi-pmic"; + reg = <0x4 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; + + pm8004_lsid5: pmic@5 { + compatible = "qcom,pm8004", "qcom,spmi-pmic"; + reg = <0x5 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8004_spmi_regulators: regulators { + compatible = "qcom,pm8004-regulators"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm8005.dtsi b/arch/arm64/boot/dts/qcom/pm8005.dtsi new file mode 100644 index 000000000..50fb6c753 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm8005.dtsi @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* Copyright 2018 Google LLC. */ + +#include +#include + +&spmi_bus { + pm8005_lsid0: pmic@4 { + compatible = "qcom,pm8005", "qcom,spmi-pmic"; + reg = <0x4 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8005_gpio: gpios@c000 { + compatible = "qcom,pm8005-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pm8005_gpio 0 0 4>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + }; + + pm8005_lsid1: pmic@5 { + compatible = "qcom,pm8005", "qcom,spmi-pmic"; + reg = <0x5 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8005_regulators: regulators { + compatible = "qcom,pm8005-regulators"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm8009.dtsi b/arch/arm64/boot/dts/qcom/pm8009.dtsi new file mode 100644 index 000000000..0c2c424be --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm8009.dtsi @@ -0,0 +1,38 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2020, Linaro Limited + */ + +#include + +&spmi_bus { + pmic@a { + compatible = "qcom,pm8009", "qcom,spmi-pmic"; + reg = <0xa SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8009_pon: pon@800 { + compatible = "qcom,pm8916-pon"; + reg = <0x0800>; + }; + + pm8009_gpios: gpio@c000 { + compatible = "qcom,pm8005-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pm8009_gpios 0 0 4>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmic@b { + compatible = "qcom,pm8009", "qcom,spmi-pmic"; + reg = <0xb SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi new file mode 100644 index 000000000..574fa95a2 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi @@ -0,0 +1,146 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2019, Linaro Limited + */ + +#include +#include +#include +#include + +/ { + thermal-zones { + pm8150-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pm8150_temp>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + + trip2 { + temperature = <145000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus { + pm8150_0: pmic@0 { + compatible = "qcom,pm8150", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pon: pon@800 { + compatible = "qcom,pm8998-pon"; + reg = <0x0800>; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; + + pon_pwrkey: pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0x0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = ; + + status = "disabled"; + }; + + pon_resin: resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 0x1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + + status = "disabled"; + }; + }; + + pm8150_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + io-channels = <&pm8150_adc ADC5_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pm8150_adc: adc@3100 { + compatible = "qcom,spmi-adc5"; + reg = <0x3100>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + + ref-gnd@0 { + reg = ; + qcom,pre-scaling = <1 1>; + label = "ref_gnd"; + }; + + vref-1p25@1 { + reg = ; + qcom,pre-scaling = <1 1>; + label = "vref_1p25"; + }; + + die-temp@6 { + reg = ; + qcom,pre-scaling = <1 1>; + label = "die_temp"; + }; + }; + + pm8150_adc_tm: adc-tm@3500 { + compatible = "qcom,spmi-adc-tm5"; + reg = <0x3500>; + interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; + }; + + pm8150_gpios: gpio@c000 { + compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pm8150_gpios 0 0 10>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmic@1 { + compatible = "qcom,pm8150", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi new file mode 100644 index 000000000..cdded791d --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi @@ -0,0 +1,141 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2019, Linaro Limited + */ + +#include +#include +#include + +/ { + thermal-zones { + pm8150b-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pm8150b_temp>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + + trip2 { + temperature = <145000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus { + pmic@2 { + compatible = "qcom,pm8150b", "qcom,spmi-pmic"; + reg = <0x2 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pon@800 { + compatible = "qcom,pm8916-pon"; + reg = <0x0800>; + + status = "disabled"; + }; + + pm8150b_vbus: dcdc@1100 { + compatible = "qcom,pm8150b-vbus-reg"; + status = "disabled"; + reg = <0x1100>; + }; + + pm8150b_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x2 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + io-channels = <&pm8150b_adc ADC5_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pm8150b_adc: adc@3100 { + compatible = "qcom,spmi-adc5"; + reg = <0x3100>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + + ref-gnd@0 { + reg = ; + qcom,pre-scaling = <1 1>; + label = "ref_gnd"; + }; + + vref-1p25@1 { + reg = ; + qcom,pre-scaling = <1 1>; + label = "vref_1p25"; + }; + + die-temp@6 { + reg = ; + qcom,pre-scaling = <1 1>; + label = "die_temp"; + }; + + chg-temp@9 { + reg = ; + qcom,pre-scaling = <1 1>; + label = "chg_temp"; + }; + }; + + pm8150b_adc_tm: adc-tm@3500 { + compatible = "qcom,spmi-adc-tm5"; + reg = <0x3500>; + interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pm8150b_gpios: gpio@c000 { + compatible = "qcom,pm8150b-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pm8150b_gpios 0 0 12>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmic@3 { + compatible = "qcom,pm8150b", "qcom,spmi-pmic"; + reg = <0x3 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8150b_lpg: pwm { + compatible = "qcom,pm8150b-lpg"; + + #address-cells = <1>; + #size-cells = <0>; + #pwm-cells = <2>; + + status = "disabled"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi new file mode 100644 index 000000000..135bfb8d6 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi @@ -0,0 +1,130 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2019, Linaro Limited + */ + +#include +#include +#include + +/ { + thermal-zones { + pm8150l-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pm8150l_temp>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + + trip2 { + temperature = <145000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus { + pmic@4 { + compatible = "qcom,pm8150l", "qcom,spmi-pmic"; + reg = <0x4 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pon@800 { + compatible = "qcom,pm8916-pon"; + reg = <0x0800>; + + status = "disabled"; + }; + + pm8150l_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x4 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + io-channels = <&pm8150l_adc ADC5_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pm8150l_adc: adc@3100 { + compatible = "qcom,spmi-adc5"; + reg = <0x3100>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + interrupts = <0x4 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + + ref-gnd@0 { + reg = ; + qcom,pre-scaling = <1 1>; + label = "ref_gnd"; + }; + + vref-1p25@1 { + reg = ; + qcom,pre-scaling = <1 1>; + label = "vref_1p25"; + }; + + die-temp@6 { + reg = ; + qcom,pre-scaling = <1 1>; + label = "die_temp"; + }; + }; + + pm8150l_adc_tm: adc-tm@3500 { + compatible = "qcom,spmi-adc-tm5"; + reg = <0x3500>; + interrupts = <0x4 0x35 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pm8150l_gpios: gpio@c000 { + compatible = "qcom,pm8150l-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pm8150l_gpios 0 0 12>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmic@5 { + compatible = "qcom,pm8150l", "qcom,spmi-pmic"; + reg = <0x5 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8150l_lpg: pwm { + compatible = "qcom,pm8150l-lpg"; + + #address-cells = <1>; + #size-cells = <0>; + #pwm-cells = <2>; + + status = "disabled"; + }; + + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm8350.dtsi b/arch/arm64/boot/dts/qcom/pm8350.dtsi new file mode 100644 index 000000000..9ed9ba23e --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm8350.dtsi @@ -0,0 +1,57 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Linaro Limited + */ + +#include +#include + +/ { + thermal-zones { + pm8350_thermal: pm8350-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pm8350_temp_alarm>; + + trips { + pm8350_trip0: trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + pm8350_crit: pm8350c-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus { + pm8350: pmic@1 { + compatible = "qcom,pm8350", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8350_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pm8350_gpios: gpio@8800 { + compatible = "qcom,pm8350-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pm8350_gpios 0 0 10>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm8350b.dtsi b/arch/arm64/boot/dts/qcom/pm8350b.dtsi new file mode 100644 index 000000000..05c105898 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm8350b.dtsi @@ -0,0 +1,57 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Linaro Limited + */ + +#include +#include + +/ { + thermal-zones { + pm8350b_thermal: pm8350b-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pm8350b_temp_alarm>; + + trips { + pm8350b_trip0: trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + pm8350b_crit: pm8350c-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus { + pm8350b: pmic@3 { + compatible = "qcom,pm8350b", "qcom,spmi-pmic"; + reg = <0x3 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8350b_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x3 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pm8350b_gpios: gpio@8800 { + compatible = "qcom,pm8350b-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pm8350b_gpios 0 0 8>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm8350c.dtsi b/arch/arm64/boot/dts/qcom/pm8350c.dtsi new file mode 100644 index 000000000..f28e71487 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm8350c.dtsi @@ -0,0 +1,63 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Linaro Limited + */ + +#include +#include + +&spmi_bus { + pm8350c: pmic@2 { + compatible = "qcom,pm8350c", "qcom,spmi-pmic"; + reg = <0x2 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8350c_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pm8350c_gpios: gpio@8800 { + compatible = "qcom,pm8350c-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pm8350c_gpios 0 0 9>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pm8350c_pwm: pwm { + compatible = "qcom,pm8350c-pwm"; + #pwm-cells = <2>; + status = "disabled"; + }; + }; +}; + +/ { + thermal-zones { + pm8350c_thermal: pm8350c-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pm8350c_temp_alarm>; + + trips { + pm8350c_trip0: trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + pm8350c_crit: pm8350c-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm8450.dtsi b/arch/arm64/boot/dts/qcom/pm8450.dtsi new file mode 100644 index 000000000..ae5bce3cf --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm8450.dtsi @@ -0,0 +1,59 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Linaro Limited + */ + +#include +#include + +/ { + thermal-zones { + pm8450-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pm8450_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + }; +}; + + +&spmi_bus { + pm8450: pmic@7 { + compatible = "qcom,pm8450", "qcom,spmi-pmic"; + reg = <0x7 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8450_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x7 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pm8450_gpios: gpio@8800 { + compatible = "qcom,pm8450-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pm8450_gpios 0 0 4>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi new file mode 100644 index 000000000..606c2a6d1 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi @@ -0,0 +1,182 @@ +// SPDX-License-Identifier: GPL-2.0 +#include +#include +#include +#include + +&spmi_bus { + + pm8916_0: pmic@0 { + compatible = "qcom,pm8916", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pon@800 { + compatible = "qcom,pm8916-pon"; + reg = <0x800>; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; + + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = ; + }; + + pm8916_resin: resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + status = "disabled"; + }; + + watchdog { + compatible = "qcom,pm8916-wdt"; + interrupts = <0x0 0x8 6 IRQ_TYPE_EDGE_RISING>; + timeout-sec = <60>; + }; + }; + + pm8916_usbin: extcon@1300 { + compatible = "qcom,pm8941-misc"; + reg = <0x1300>; + interrupts = <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "usb_vbus"; + status = "disabled"; + }; + + pm8916_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>; + io-channels = <&pm8916_vadc VADC_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pm8916_vadc: adc@3100 { + compatible = "qcom,spmi-vadc"; + reg = <0x3100>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + adc-chan@0 { + reg = ; + qcom,pre-scaling = <1 10>; + }; + adc-chan@7 { + reg = ; + qcom,pre-scaling = <1 3>; + }; + adc-chan@8 { + reg = ; + }; + adc-chan@9 { + reg = ; + }; + adc-chan@a { + reg = ; + }; + adc-chan@e { + reg = ; + }; + adc-chan@f { + reg = ; + }; + }; + + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; + }; + + pm8916_mpps: mpps@a000 { + compatible = "qcom,pm8916-mpp", "qcom,spmi-mpp"; + reg = <0xa000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pm8916_mpps 0 0 4>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pm8916_gpios: gpios@c000 { + compatible = "qcom,pm8916-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pm8916_gpios 0 0 4>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pm8916_1: pmic@1 { + compatible = "qcom,pm8916", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8916_pwm: pwm { + compatible = "qcom,pm8916-pwm"; + + #pwm-cells = <2>; + + status = "disabled"; + }; + + pm8916_vib: vibrator@c000 { + compatible = "qcom,pm8916-vib"; + reg = <0xc000>; + status = "disabled"; + }; + + wcd_codec: audio-codec@f000 { + compatible = "qcom,pm8916-wcd-analog-codec"; + reg = <0xf000>; + reg-names = "pmic-codec-core"; + clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>; + clock-names = "mclk"; + interrupt-parent = <&spmi_bus>; + interrupts = <0x1 0xf0 0x0 IRQ_TYPE_NONE>, + <0x1 0xf0 0x1 IRQ_TYPE_NONE>, + <0x1 0xf0 0x2 IRQ_TYPE_NONE>, + <0x1 0xf0 0x3 IRQ_TYPE_NONE>, + <0x1 0xf0 0x4 IRQ_TYPE_NONE>, + <0x1 0xf0 0x5 IRQ_TYPE_NONE>, + <0x1 0xf0 0x6 IRQ_TYPE_NONE>, + <0x1 0xf0 0x7 IRQ_TYPE_NONE>, + <0x1 0xf1 0x0 IRQ_TYPE_NONE>, + <0x1 0xf1 0x1 IRQ_TYPE_NONE>, + <0x1 0xf1 0x2 IRQ_TYPE_NONE>, + <0x1 0xf1 0x3 IRQ_TYPE_NONE>, + <0x1 0xf1 0x4 IRQ_TYPE_NONE>, + <0x1 0xf1 0x5 IRQ_TYPE_NONE>; + interrupt-names = "cdc_spk_cnp_int", + "cdc_spk_clip_int", + "cdc_spk_ocp_int", + "mbhc_ins_rem_det1", + "mbhc_but_rel_det", + "mbhc_but_press_det", + "mbhc_ins_rem_det", + "mbhc_switch_int", + "cdc_ear_ocp_int", + "cdc_hphr_ocp_int", + "cdc_hphl_ocp_det", + "cdc_ear_cnp_int", + "cdc_hphr_cnp_int", + "cdc_hphl_cnp_int"; + vdd-cdc-io-supply = <&pm8916_l5>; + vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>; + vdd-micbias-supply = <&pm8916_l13>; + #sound-dai-cells = <1>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm8953.dtsi b/arch/arm64/boot/dts/qcom/pm8953.dtsi new file mode 100644 index 000000000..a1d36f9eb --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm8953.dtsi @@ -0,0 +1,90 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* Copyright (c) 2022, The Linux Foundation. All rights reserved. */ + +#include +#include +#include +#include + +&spmi_bus { + pmic@0 { + compatible = "qcom,pm8953", "qcom,spmi-pmic"; + reg = <0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8953_pon: pon@800 { + compatible = "qcom,pm8916-pon"; + reg = <0x800>; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; + + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x00 0x08 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = ; + }; + + pm8953_resin: resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x00 0x08 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + status = "disabled"; + }; + }; + + temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>; + io-channels = <&pm8953_vadc VADC_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pm8953_vadc: adc@3100 { + compatible = "qcom,spmi-vadc"; + reg = <0x3100>; + interrupts = <0x00 0x31 0x00 0x01>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + adc-chan@8 { + reg = ; + }; + adc-chan@9 { + reg = ; + }; + adc-chan@a { + reg = ; + }; + adc-chan@c { + reg = ; + }; + adc-chan@e { + reg = ; + }; + adc-chan@f { + reg = ; + }; + }; + + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>, <0x6100>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; + }; + }; + + pmic@1 { + compatible = "qcom,pm8953", "qcom,spmi-pmic"; + reg = <1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm8994.dtsi b/arch/arm64/boot/dts/qcom/pm8994.dtsi new file mode 100644 index 000000000..e92e5ac41 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm8994.dtsi @@ -0,0 +1,152 @@ +// SPDX-License-Identifier: GPL-2.0 +#include +#include +#include +#include + +/ { + thermal-zones { + pm8994-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&pm8994_temp>; + + trips { + pm8994_alert0: pm8994-alert0 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + pm8994_crit: pm8994-crit { + temperature = <125000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus { + + pmic@0 { + compatible = "qcom,pm8994", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>, <0x6100>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; + }; + + pm8994_pon: pon@800 { + compatible = "qcom,pm8916-pon"; + reg = <0x800>; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; + + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = ; + }; + + pm8994_resin: resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + status = "disabled"; + }; + }; + + pm8994_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>; + io-channels = <&pm8994_vadc VADC_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pm8994_vadc: adc@3100 { + compatible = "qcom,spmi-vadc"; + reg = <0x3100>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + adc-chan@7 { + reg = ; + qcom,pre-scaling = <1 3>; + label = "vph_pwr"; + }; + adc-chan@8 { + reg = ; + label = "die_temp"; + }; + adc-chan@9 { + reg = ; + label = "ref_625mv"; + }; + adc-chan@a { + reg = ; + label = "ref_1250mv"; + }; + adc-chan@e { + reg = ; + }; + adc-chan@f { + reg = ; + }; + }; + + pm8994_gpios: gpios@c000 { + compatible = "qcom,pm8994-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pm8994_gpios 0 0 22>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pm8994_mpps: mpps@a000 { + compatible = "qcom,pm8994-mpp", "qcom,spmi-mpp"; + reg = <0xa000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pm8994_mpps 0 0 8>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmic@1 { + compatible = "qcom,pm8994", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8994_lpg: pwm { + compatible = "qcom,pm8994-lpg"; + + #address-cells = <1>; + #size-cells = <0>; + #pwm-cells = <2>; + + status = "disabled"; + }; + + pm8994_spmi_regulators: regulators { + compatible = "qcom,pm8994-regulators"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi new file mode 100644 index 000000000..d09f2954b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi @@ -0,0 +1,122 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* Copyright 2018 Google LLC. */ + +#include +#include +#include +#include +#include + +/ { + thermal-zones { + pm8998-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&pm8998_temp>; + + trips { + pm8998_alert0: pm8998-alert0 { + temperature = <105000>; + hysteresis = <2000>; + type = "passive"; + }; + pm8998_crit: pm8998-crit { + temperature = <125000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus { + pm8998_lsid0: pmic@0 { + compatible = "qcom,pm8998", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8998_pon: pon@800 { + compatible = "qcom,pm8998-pon"; + + reg = <0x800>; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; + + pm8998_pwrkey: pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = ; + }; + }; + + pm8998_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>; + io-channels = <&pm8998_adc ADC5_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pm8998_coincell: coincell@2800 { + compatible = "qcom,pm8941-coincell"; + reg = <0x2800>; + + status = "disabled"; + }; + + pm8998_adc: adc@3100 { + compatible = "qcom,spmi-adc-rev2"; + reg = <0x3100>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + adc-chan@6 { + reg = ; + label = "die_temp"; + }; + }; + + pm8998_adc_tm: adc-tm@3400 { + compatible = "qcom,spmi-adc-tm-hc"; + reg = <0x3400>; + interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>, <0x6100>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; + }; + + pm8998_gpio: gpios@c000 { + compatible = "qcom,pm8998-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pm8998_gpio 0 0 26>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + }; + + pm8998_lsid1: pmic@1 { + compatible = "qcom,pm8998", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pmi8994.dtsi b/arch/arm64/boot/dts/qcom/pmi8994.dtsi new file mode 100644 index 000000000..49902a3e1 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pmi8994.dtsi @@ -0,0 +1,65 @@ +// SPDX-License-Identifier: GPL-2.0 +#include +#include + +&spmi_bus { + + pmic@2 { + compatible = "qcom,pmi8994", "qcom,spmi-pmic"; + reg = <0x2 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmi8994_gpios: gpios@c000 { + compatible = "qcom,pmi8994-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pmi8994_gpios 0 0 10>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pmi8994_mpps: mpps@a000 { + compatible = "qcom,pmi8994-mpp", "qcom,spmi-mpp"; + reg = <0xa000>; + gpio-controller; + gpio-ranges = <&pmi8994_mpps 0 0 4>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmic@3 { + compatible = "qcom,pmi8994", "qcom,spmi-pmic"; + reg = <0x3 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmi8994_lpg: pwm { + compatible = "qcom,pmi8994-lpg"; + + #address-cells = <1>; + #size-cells = <0>; + #pwm-cells = <2>; + + status = "disabled"; + }; + + pmi8994_spmi_regulators: regulators { + compatible = "qcom,pmi8994-regulators"; + }; + + pmi8994_wled: wled@d800 { + compatible = "qcom,pmi8994-wled"; + reg = <0xd800>, <0xd900>; + interrupts = <0x3 0xd8 0x1 IRQ_TYPE_EDGE_RISING>, + <0x3 0xd8 0x2 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ovp", "short"; + qcom,cabc; + qcom,external-pfet; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pmi8996.dtsi b/arch/arm64/boot/dts/qcom/pmi8996.dtsi new file mode 100644 index 000000000..31b47209e --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pmi8996.dtsi @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2021, Konrad Dybcio + */ + + /* + * PMI8996 is a slight modification of PMI8994 with + * some notable changes, like being the first PMIC + * whose the bootloader has to check to continue booting + * and a change to a LABIBB parameter. + */ + +/ { + qcom,pmic-id = <0x20009 0x10013 0 0>; +}; diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi new file mode 100644 index 000000000..3852a012b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi @@ -0,0 +1,66 @@ +// SPDX-License-Identifier: GPL-2.0 +#include +#include + +&spmi_bus { + pmi8998_lsid0: pmic@2 { + compatible = "qcom,pmi8998", "qcom,spmi-pmic"; + reg = <0x2 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmi8998_gpio: gpios@c000 { + compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pmi8998_gpio 0 0 14>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmi8998_lsid1: pmic@3 { + compatible = "qcom,pmi8998", "qcom,spmi-pmic"; + reg = <0x3 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + labibb { + compatible = "qcom,pmi8998-lab-ibb"; + + ibb: ibb { + interrupts = <0x3 0xdc 0x2 IRQ_TYPE_EDGE_RISING>, + <0x3 0xdc 0x0 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "sc-err", "ocp"; + }; + + lab: lab { + interrupts = <0x3 0xde 0x1 IRQ_TYPE_EDGE_RISING>, + <0x3 0xde 0x0 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "sc-err", "ocp"; + }; + }; + + pmi8998_lpg: pwm { + compatible = "qcom,pmi8998-lpg"; + + #address-cells = <1>; + #size-cells = <0>; + #pwm-cells = <2>; + + status = "disabled"; + }; + + pmi8998_wled: leds@d800 { + compatible = "qcom,pmi8998-wled"; + reg = <0xd800>, <0xd900>; + interrupts = <0x3 0xd8 0x1 IRQ_TYPE_EDGE_RISING>, + <0x3 0xd8 0x2 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ovp", "short"; + label = "backlight"; + + status = "disabled"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pmk8350.dtsi b/arch/arm64/boot/dts/qcom/pmk8350.dtsi new file mode 100644 index 000000000..29cfb6fca --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pmk8350.dtsi @@ -0,0 +1,74 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Linaro Limited + */ + +#include +#include +#include +#include + +&spmi_bus { + pmk8350: pmic@0 { + compatible = "qcom,pmk8350", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmk8350_pon: pon@1300 { + compatible = "qcom,pmk8350-pon"; + reg = <0x1300>, <0x800>; + reg-names = "hlos", "pbs"; + + pon_pwrkey: pwrkey { + compatible = "qcom,pmk8350-pwrkey"; + interrupts = <0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>; + linux,code = ; + status = "disabled"; + }; + + pon_resin: resin { + compatible = "qcom,pmk8350-resin"; + interrupts = <0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>; + status = "disabled"; + }; + }; + + pmk8350_vadc: adc@3100 { + compatible = "qcom,spmi-adc7"; + reg = <0x3100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #io-channel-cells = <1>; + }; + + pmk8350_adc_tm: adc-tm@3400 { + compatible = "qcom,spmi-adc-tm5-gen2"; + reg = <0x3400>; + interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #thermal-sensor-cells = <1>; + status = "disabled"; + }; + + pmk8350_rtc: rtc@6100 { + compatible = "qcom,pmk8350-rtc"; + reg = <0x6100>, <0x6200>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + + pmk8350_gpios: gpio@b000 { + compatible = "qcom,pmk8350-gpio", "qcom,spmi-gpio"; + reg = <0xb000>; + gpio-controller; + gpio-ranges = <&pmk8350_gpios 0 0 4>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi b/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi new file mode 100644 index 000000000..20c5d60c8 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi @@ -0,0 +1,135 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Linaro Limited + */ + +#include +#include +#include +#include + +/ { + thermal-zones { + pmm8155au-1-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pmm8155au_1_temp>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + + trip2 { + temperature = <145000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus { + pmic@0 { + compatible = "qcom,pmm8155au", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pon: pon@800 { + compatible = "qcom,pm8916-pon"; + reg = <0x0800>; + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0x0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = ; + + status = "disabled"; + }; + }; + + pmm8155au_1_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + io-channels = <&pmm8155au_1_adc ADC5_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pmm8155au_1_adc: adc@3100 { + compatible = "qcom,spmi-adc5"; + reg = <0x3100>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + + ref-gnd@0 { + reg = ; + qcom,pre-scaling = <1 1>; + label = "ref_gnd"; + }; + + vref-1p25@1 { + reg = ; + qcom,pre-scaling = <1 1>; + label = "vref_1p25"; + }; + + die-temp@6 { + reg = ; + qcom,pre-scaling = <1 1>; + label = "die_temp"; + }; + }; + + pmm8155au_1_adc_tm: adc-tm@3500 { + compatible = "qcom,spmi-adc-tm5"; + reg = <0x3500>; + interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pmm8155au_1_rtc: rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; + + status = "disabled"; + }; + + pmm8155au_1_gpios: gpio@c000 { + compatible = "qcom,pmm8155au-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmm8155au_1_gpios 0 0 10>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmic@1 { + compatible = "qcom,pmm8155au", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi b/arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi new file mode 100644 index 000000000..1da4606e8 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi @@ -0,0 +1,108 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Linaro Limited + */ + +#include +#include +#include + +/ { + thermal-zones { + pmm8155au-2-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pmm8155au_2_temp>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + + trip2 { + temperature = <145000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus { + pmic@4 { + compatible = "qcom,pmm8155au", "qcom,spmi-pmic"; + reg = <0x4 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pon@800 { + compatible = "qcom,pm8916-pon"; + reg = <0x0800>; + + status = "disabled"; + }; + + pmm8155au_2_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x4 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + io-channels = <&pmm8155au_2_adc ADC5_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pmm8155au_2_adc: adc@3100 { + compatible = "qcom,spmi-adc5"; + reg = <0x3100>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + interrupts = <0x4 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + + ref-gnd@0 { + reg = ; + qcom,pre-scaling = <1 1>; + label = "ref_gnd"; + }; + + vref-1p25@1 { + reg = ; + qcom,pre-scaling = <1 1>; + label = "vref_1p25"; + }; + + die-temp@6 { + reg = ; + qcom,pre-scaling = <1 1>; + label = "die_temp"; + }; + }; + + pmm8155au_2_gpios: gpio@c000 { + compatible = "qcom,pmm8155au-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmm8155au_2_gpios 0 0 10>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmic@5 { + compatible = "qcom,pmm8155au", "qcom,spmi-pmic"; + reg = <0x5 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pmr735a.dtsi b/arch/arm64/boot/dts/qcom/pmr735a.dtsi new file mode 100644 index 000000000..febda5077 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pmr735a.dtsi @@ -0,0 +1,57 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Linaro Limited + */ + +#include +#include + +&spmi_bus { + pmr735a: pmic@4 { + compatible = "qcom,pmr735a", "qcom,spmi-pmic"; + reg = <0x4 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmr735a_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x4 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmr735a_gpios: gpio@8800 { + compatible = "qcom,pmr735a-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmr735a_gpios 0 0 4>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; + +/ { + thermal-zones { + pmr735a_thermal: pmr735a-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pmr735a_temp_alarm>; + + trips { + pmr735a_trip0: trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + pmr735a_crit: pmr735a-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pmr735b.dtsi b/arch/arm64/boot/dts/qcom/pmr735b.dtsi new file mode 100644 index 000000000..f7473e247 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pmr735b.dtsi @@ -0,0 +1,57 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Linaro Limited + */ + +#include +#include + +/ { + thermal-zones { + pmr735b_thermal: pmr735b-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pmr735b_temp_alarm>; + + trips { + pmr735b_trip0: trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + pmr735b_crit: pmr735a-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus { + pmr735b: pmic@5 { + compatible = "qcom,pmr735b", "qcom,spmi-pmic"; + reg = <0x5 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmr735b_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x5 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmr735b_gpios: gpio@8800 { + compatible = "qcom,pmr735b-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmr735b_gpios 0 0 4>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pms405.dtsi b/arch/arm64/boot/dts/qcom/pms405.dtsi new file mode 100644 index 000000000..634b0681d --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pms405.dtsi @@ -0,0 +1,140 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2018, Linaro Limited + +#include +#include +#include +#include + +/ { + thermal-zones { + pms405-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&pms405_temp>; + + trips { + pms405_alert0: pms405-alert0 { + temperature = <105000>; + hysteresis = <2000>; + type = "passive"; + }; + pms405_crit: pms405-crit { + temperature = <125000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus { + pms405_0: pms405@0 { + compatible = "qcom,pms405", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pms405_gpios: gpio@c000 { + compatible = "qcom,pms405-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pms405_gpios 0 0 12>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pon@800 { + compatible = "qcom,pms405-pon"; + reg = <0x0800>; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; + + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = ; + }; + }; + + pms405_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>; + io-channels = <&pms405_adc ADC5_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pms405_adc: adc@3100 { + compatible = "qcom,pms405-adc", "qcom,spmi-adc-rev2"; + reg = <0x3100>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + ref_gnd@0 { + reg = ; + qcom,pre-scaling = <1 1>; + }; + + vref_1p25@1 { + reg = ; + qcom,pre-scaling = <1 1>; + }; + + pon_1: vph_pwr@131 { + reg = ; + qcom,pre-scaling = <1 3>; + }; + + die_temp@6 { + reg = ; + qcom,pre-scaling = <1 1>; + }; + + pa_therm1: thermistor1@77 { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + }; + + pa_therm3: thermistor3@79 { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + }; + + xo_therm: xo_temp@76 { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + }; + }; + + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; + }; + }; + + pms405_1: pms405@1 { + compatible = "qcom,pms405", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + + pms405_spmi_regulators: regulators { + compatible = "qcom,pms405-regulators"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts b/arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts new file mode 100644 index 000000000..937eb4555 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2018, Linaro Limited + +/dts-v1/; + +#include "qcs404-evb.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. QCS404 EVB 1000"; + compatible = "qcom,qcs404-evb-1000", "qcom,qcs404-evb", + "qcom,qcs404"; +}; diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts b/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts new file mode 100644 index 000000000..08d5d5122 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts @@ -0,0 +1,94 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2018, Linaro Limited + +/dts-v1/; + +#include +#include "qcs404-evb.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. QCS404 EVB 4000"; + compatible = "qcom,qcs404-evb-4000", "qcom,qcs404-evb", + "qcom,qcs404"; +}; + +ðernet { + status = "okay"; + + snps,reset-gpio = <&tlmm 60 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 10000>; + + pinctrl-names = "default"; + pinctrl-0 = <ðernet_defaults>; + + phy-handle = <&phy1>; + phy-mode = "rgmii"; + mdio { + #address-cells = <0x1>; + #size-cells = <0x0>; + compatible = "snps,dwmac-mdio"; + phy1: phy@4 { + compatible = "ethernet-phy-ieee802.3-c22"; + device_type = "ethernet-phy"; + reg = <0x4>; + }; + }; +}; + +&tlmm { + ethernet_defaults: ethernet-defaults { + int { + pins = "gpio61"; + function = "rgmii_int"; + bias-disable; + drive-strength = <2>; + }; + mdc { + pins = "gpio76"; + function = "rgmii_mdc"; + bias-pull-up; + }; + mdio { + pins = "gpio75"; + function = "rgmii_mdio"; + bias-pull-up; + }; + tx { + pins = "gpio67", "gpio66", "gpio65", "gpio64"; + function = "rgmii_tx"; + bias-pull-up; + drive-strength = <16>; + }; + rx { + pins = "gpio73", "gpio72", "gpio71", "gpio70"; + function = "rgmii_rx"; + bias-disable; + drive-strength = <2>; + }; + tx-ctl { + pins = "gpio68"; + function = "rgmii_ctl"; + bias-pull-up; + drive-strength = <16>; + }; + rx-ctl { + pins = "gpio74"; + function = "rgmii_ctl"; + bias-disable; + drive-strength = <2>; + }; + tx-ck { + pins = "gpio63"; + function = "rgmii_ck"; + bias-pull-up; + drive-strength = <16>; + }; + rx-ck { + pins = "gpio69"; + function = "rgmii_ck"; + bias-disable; + drive-strength = <2>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi new file mode 100644 index 000000000..1678ef0f8 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi @@ -0,0 +1,396 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2018, Linaro Limited + +#include +#include "qcs404.dtsi" +#include "pms405.dtsi" +#include +#include + +/ { + aliases { + serial0 = &blsp1_uart2; + serial1 = &blsp1_uart3; + }; + + chosen { + stdout-path = "serial0"; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + }; + + vdd_ch0_3p3: + vdd_esmps3_3p3: vdd-esmps3-3p3-regulator { + compatible = "regulator-fixed"; + regulator-name = "eSMPS3_3P3"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + usb3_vbus_reg: regulator-usb3-vbus { + compatible = "regulator-fixed"; + regulator-name = "VBUS_BOOST_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&pms405_gpios 3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_vbus_boost_pin>; + vin-supply = <&vph_pwr>; + enable-active-high; + + /* TODO: Drop this when introducing role switching */ + regulator-always-on; + }; +}; + +&blsp1_uart3 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + vddio-supply = <&vreg_l6_1p8>; + vddxo-supply = <&vreg_l5_1p8>; + vddrf-supply = <&vreg_l1_1p3>; + vddch0-supply = <&vdd_ch0_3p3>; + + local-bd-address = [ 02 00 00 00 5a ad ]; + + max-speed = <3200000>; + }; +}; + +&blsp1_dma { + qcom,controlled-remotely; +}; + +&blsp2_dma { + qcom,controlled-remotely; +}; + +&gcc { + protected-clocks = , + , + , + , + <141>, /* GCC_WCSS_Q6_AHB_CLK */ + <142>; /* GCC_WCSS_Q6_AXIM_CLK */ +}; + +&pms405_spmi_regulators { + vdd_s3-supply = <&vph_pwr>; + + pms405_s3: s3 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vdd_apc"; + regulator-initial-mode = <1>; + regulator-min-microvolt = <1048000>; + regulator-max-microvolt = <1384000>; + }; +}; + +&pcie { + status = "okay"; + + perst-gpios = <&tlmm 43 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&perst_state>; +}; + +&pcie_phy { + status = "okay"; + + vdda-vp-supply = <&vreg_l3_1p05>; + vdda-vph-supply = <&vreg_l5_1p8>; +}; + +&remoteproc_adsp { + status = "okay"; +}; + +&remoteproc_cdsp { + status = "okay"; +}; + +&remoteproc_wcss { + status = "okay"; +}; + +&rpm_requests { + pms405-regulators { + compatible = "qcom,rpm-pms405-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_l1_l2-supply = <&vreg_s5_1p35>; + vdd_l3_l8-supply = <&vreg_s5_1p35>; + vdd_l4-supply = <&vreg_s5_1p35>; + vdd_l5_l6-supply = <&vreg_s4_1p8>; + vdd_l7-supply = <&vph_pwr>; + vdd_l9-supply = <&vreg_s5_1p35>; + vdd_l10_l11_l12_l13-supply = <&vph_pwr>; + + vreg_s4_1p8: s4 { + regulator-min-microvolt = <1728000>; + regulator-max-microvolt = <1920000>; + }; + + vreg_s5_1p35: s5 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_l1_1p3: l1 { + regulator-min-microvolt = <1240000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_l2_1p275: l2 { + regulator-min-microvolt = <1048000>; + regulator-max-microvolt = <1280000>; + }; + + vreg_l3_1p05: l3 { + regulator-min-microvolt = <1048000>; + regulator-max-microvolt = <1160000>; + }; + + vreg_l4_1p2: l4 { + regulator-min-microvolt = <1144000>; + regulator-max-microvolt = <1256000>; + }; + + vreg_l5_1p8: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l6_1p8: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vreg_l7_1p8: l7 { + regulator-min-microvolt = <1616000>; + regulator-max-microvolt = <3000000>; + }; + + vreg_l8_1p2: l8 { + regulator-min-microvolt = <1136000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_l10_3p3: l10 { + regulator-min-microvolt = <2936000>; + regulator-max-microvolt = <3088000>; + }; + + vreg_l11_sdc2: l11 { + regulator-min-microvolt = <2696000>; + regulator-max-microvolt = <3304000>; + }; + + vreg_l12_3p3: l12 { + regulator-min-microvolt = <3050000>; + regulator-max-microvolt = <3300000>; + }; + + vreg_l13_3p3: l13 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + }; +}; + +&sdcc1 { + status = "okay"; + + supports-cqe; + mmc-ddr-1_8v; + mmc-hs400-1_8v; + bus-width = <8>; + non-removable; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; +}; + +&tlmm { + perst_state: perst { + pins = "gpio43"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + output-low; + }; + + sdc1_on: sdc1-on { + clk { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <10>; + }; + + rclk { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc1_off: sdc1-off { + clk { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + + rclk { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + usb3_id_pin: usb3-id-pin { + pinmux { + pins = "gpio116"; + function = "gpio"; + }; + + pinconf { + pins = "gpio116"; + drive-strength = <2>; + bias-pull-up; + input-enable; + }; + }; +}; + +&pms405_gpios { + usb_vbus_boost_pin: usb-vbus-boost-state { + pinconf { + pins = "gpio3"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + power-source = <1>; + }; + }; + usb3_vbus_pin: usb3-vbus-state { + pinconf { + pins = "gpio12"; + function = PMIC_GPIO_FUNC_NORMAL; + input-enable; + bias-pull-down; + power-source = <1>; + }; + }; +}; + +&usb2 { + status = "okay"; +}; + +&usb2_phy_sec { + vdd-supply = <&vreg_l4_1p2>; + vdda1p8-supply = <&vreg_l5_1p8>; + vdda3p3-supply = <&vreg_l12_3p3>; + status = "okay"; +}; + +&usb3 { + status = "okay"; + +}; + +&usb3_dwc3 { + dr_mode = "host"; +}; + +&usb2_phy_prim { + vdd-supply = <&vreg_l4_1p2>; + vdda1p8-supply = <&vreg_l5_1p8>; + vdda3p3-supply = <&vreg_l12_3p3>; + status = "okay"; +}; + +&usb3_phy { + vdd-supply = <&vreg_l3_1p05>; + vdda1p8-supply = <&vreg_l5_1p8>; + status = "okay"; +}; + +&wifi { + status = "okay"; + vdd-0.8-cx-mx-supply = <&vreg_l2_1p275>; + vdd-1.8-xo-supply = <&vreg_l5_1p8>; + vdd-1.3-rfa-supply = <&vreg_l1_1p3>; +}; + +/* PINCTRL - additions to nodes defined in qcs404.dtsi */ + +&blsp1_uart2_default { + rx { + drive-strength = <2>; + bias-disable; + }; + + tx { + drive-strength = <2>; + bias-disable; + }; +}; + +&blsp1_uart3_default { + cts { + pins = "gpio84"; + bias-disable; + }; + + rts-tx { + pins = "gpio85", "gpio82"; + drive-strength = <2>; + bias-disable; + }; + + rx { + pins = "gpio83"; + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi new file mode 100644 index 000000000..bec1b6e5a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -0,0 +1,1659 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2018, Linaro Limited + +#include +#include +#include +#include +#include +#include + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CPU0: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x100>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + next-level-cache = <&L2_0>; + #cooling-cells = <2>; + clocks = <&apcs_glb>; + operating-points-v2 = <&cpu_opp_table>; + power-domains = <&cpr>; + power-domain-names = "cpr"; + }; + + CPU1: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x101>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + next-level-cache = <&L2_0>; + #cooling-cells = <2>; + clocks = <&apcs_glb>; + operating-points-v2 = <&cpu_opp_table>; + power-domains = <&cpr>; + power-domain-names = "cpr"; + }; + + CPU2: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x102>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + next-level-cache = <&L2_0>; + #cooling-cells = <2>; + clocks = <&apcs_glb>; + operating-points-v2 = <&cpu_opp_table>; + power-domains = <&cpr>; + power-domain-names = "cpr"; + }; + + CPU3: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x103>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + next-level-cache = <&L2_0>; + #cooling-cells = <2>; + clocks = <&apcs_glb>; + operating-points-v2 = <&cpu_opp_table>; + power-domains = <&cpr>; + power-domain-names = "cpr"; + }; + + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + + idle-states { + entry-method = "psci"; + + CPU_SLEEP_0: cpu-sleep-0 { + compatible = "arm,idle-state"; + idle-state-name = "standalone-power-collapse"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <125>; + exit-latency-us = <180>; + min-residency-us = <595>; + local-timer-stop; + }; + }; + }; + + cpu_opp_table: opp-table-cpu { + compatible = "operating-points-v2-kryo-cpu"; + opp-shared; + + opp-1094400000 { + opp-hz = /bits/ 64 <1094400000>; + required-opps = <&cpr_opp1>; + }; + opp-1248000000 { + opp-hz = /bits/ 64 <1248000000>; + required-opps = <&cpr_opp2>; + }; + opp-1401600000 { + opp-hz = /bits/ 64 <1401600000>; + required-opps = <&cpr_opp3>; + }; + }; + + cpr_opp_table: opp-table-cpr { + compatible = "operating-points-v2-qcom-level"; + + cpr_opp1: opp1 { + opp-level = <1>; + qcom,opp-fuse-level = <1>; + }; + cpr_opp2: opp2 { + opp-level = <2>; + qcom,opp-fuse-level = <2>; + }; + cpr_opp3: opp3 { + opp-level = <3>; + qcom,opp-fuse-level = <3>; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-qcs404", "qcom,scm"; + #reset-cells = <1>; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0 0x80000000 0 0>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + tz_apps_mem: memory@85900000 { + reg = <0 0x85900000 0 0x500000>; + no-map; + }; + + xbl_mem: memory@85e00000 { + reg = <0 0x85e00000 0 0x100000>; + no-map; + }; + + smem_region: memory@85f00000 { + reg = <0 0x85f00000 0 0x200000>; + no-map; + }; + + tz_mem: memory@86100000 { + reg = <0 0x86100000 0 0x300000>; + no-map; + }; + + wlan_fw_mem: memory@86400000 { + reg = <0 0x86400000 0 0x1100000>; + no-map; + }; + + adsp_fw_mem: memory@87500000 { + reg = <0 0x87500000 0 0x1a00000>; + no-map; + }; + + cdsp_fw_mem: memory@88f00000 { + reg = <0 0x88f00000 0 0x600000>; + no-map; + }; + + wlan_msa_mem: memory@89500000 { + reg = <0 0x89500000 0 0x100000>; + no-map; + }; + + uefi_mem: memory@9f800000 { + reg = <0 0x9f800000 0 0x800000>; + no-map; + }; + }; + + rpm-glink { + compatible = "qcom,glink-rpm"; + + interrupts = ; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + mboxes = <&apcs_glb 0>; + + rpm_requests: glink-channel { + compatible = "qcom,rpm-qcs404"; + qcom,glink-channels = "rpm_requests"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-qcs404", "qcom,rpmcc"; + #clock-cells = <1>; + }; + + rpmpd: power-controller { + compatible = "qcom,qcs404-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp_ret: opp1 { + opp-level = <16>; + }; + + rpmpd_opp_ret_plus: opp2 { + opp-level = <32>; + }; + + rpmpd_opp_min_svs: opp3 { + opp-level = <48>; + }; + + rpmpd_opp_low_svs: opp4 { + opp-level = <64>; + }; + + rpmpd_opp_svs: opp5 { + opp-level = <128>; + }; + + rpmpd_opp_svs_plus: opp6 { + opp-level = <192>; + }; + + rpmpd_opp_nom: opp7 { + opp-level = <256>; + }; + + rpmpd_opp_nom_plus: opp8 { + opp-level = <320>; + }; + + rpmpd_opp_turbo: opp9 { + opp-level = <384>; + }; + + rpmpd_opp_turbo_no_cpr: opp10 { + opp-level = <416>; + }; + + rpmpd_opp_turbo_plus: opp11 { + opp-level = <512>; + }; + }; + }; + }; + }; + + smem { + compatible = "qcom,smem"; + + memory-region = <&smem_region>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + + hwlocks = <&tcsr_mutex 3>; + }; + + soc: soc@0 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + compatible = "simple-bus"; + + turingcc: clock-controller@800000 { + compatible = "qcom,qcs404-turingcc"; + reg = <0x00800000 0x30000>; + clocks = <&gcc GCC_CDSP_CFG_AHB_CLK>; + + #clock-cells = <1>; + #reset-cells = <1>; + + status = "disabled"; + }; + + rpm_msg_ram: sram@60000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0x00060000 0x6000>; + }; + + usb3_phy: phy@78000 { + compatible = "qcom,usb-ss-28nm-phy"; + reg = <0x00078000 0x400>; + #phy-cells = <0>; + clocks = <&rpmcc RPM_SMD_LN_BB_CLK>, + <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>, + <&gcc GCC_USB3_PHY_PIPE_CLK>; + clock-names = "ref", "ahb", "pipe"; + resets = <&gcc GCC_USB3_PHY_BCR>, + <&gcc GCC_USB3PHY_PHY_BCR>; + reset-names = "com", "phy"; + status = "disabled"; + }; + + usb2_phy_prim: phy@7a000 { + compatible = "qcom,usb-hs-28nm-femtophy"; + reg = <0x0007a000 0x200>; + #phy-cells = <0>; + clocks = <&rpmcc RPM_SMD_LN_BB_CLK>, + <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>, + <&gcc GCC_USB2A_PHY_SLEEP_CLK>; + clock-names = "ref", "ahb", "sleep"; + resets = <&gcc GCC_USB_HS_PHY_CFG_AHB_BCR>, + <&gcc GCC_USB2A_PHY_BCR>; + reset-names = "phy", "por"; + status = "disabled"; + }; + + usb2_phy_sec: phy@7c000 { + compatible = "qcom,usb-hs-28nm-femtophy"; + reg = <0x0007c000 0x200>; + #phy-cells = <0>; + clocks = <&rpmcc RPM_SMD_LN_BB_CLK>, + <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>, + <&gcc GCC_USB2A_PHY_SLEEP_CLK>; + clock-names = "ref", "ahb", "sleep"; + resets = <&gcc GCC_QUSB2_PHY_BCR>, + <&gcc GCC_USB2_HS_PHY_ONLY_BCR>; + reset-names = "phy", "por"; + status = "disabled"; + }; + + qfprom: qfprom@a4000 { + compatible = "qcom,qcs404-qfprom", "qcom,qfprom"; + reg = <0x000a4000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + tsens_caldata: caldata@d0 { + reg = <0x1f8 0x14>; + }; + cpr_efuse_speedbin: speedbin@13c { + reg = <0x13c 0x4>; + bits = <2 3>; + }; + cpr_efuse_quot_offset1: qoffset1@231 { + reg = <0x231 0x4>; + bits = <4 7>; + }; + cpr_efuse_quot_offset2: qoffset2@232 { + reg = <0x232 0x4>; + bits = <3 7>; + }; + cpr_efuse_quot_offset3: qoffset3@233 { + reg = <0x233 0x4>; + bits = <2 7>; + }; + cpr_efuse_init_voltage1: ivoltage1@229 { + reg = <0x229 0x4>; + bits = <4 6>; + }; + cpr_efuse_init_voltage2: ivoltage2@22a { + reg = <0x22a 0x4>; + bits = <2 6>; + }; + cpr_efuse_init_voltage3: ivoltage3@22b { + reg = <0x22b 0x4>; + bits = <0 6>; + }; + cpr_efuse_quot1: quot1@22b { + reg = <0x22b 0x4>; + bits = <6 12>; + }; + cpr_efuse_quot2: quot2@22d { + reg = <0x22d 0x4>; + bits = <2 12>; + }; + cpr_efuse_quot3: quot3@230 { + reg = <0x230 0x4>; + bits = <0 12>; + }; + cpr_efuse_ring1: ring1@228 { + reg = <0x228 0x4>; + bits = <0 3>; + }; + cpr_efuse_ring2: ring2@228 { + reg = <0x228 0x4>; + bits = <4 3>; + }; + cpr_efuse_ring3: ring3@229 { + reg = <0x229 0x4>; + bits = <0 3>; + }; + cpr_efuse_revision: revision@218 { + reg = <0x218 0x4>; + bits = <3 3>; + }; + }; + + rng: rng@e3000 { + compatible = "qcom,prng-ee"; + reg = <0x000e3000 0x1000>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; + + bimc: interconnect@400000 { + reg = <0x00400000 0x80000>; + compatible = "qcom,qcs404-bimc"; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_BIMC_CLK>, + <&rpmcc RPM_SMD_BIMC_A_CLK>; + }; + + tsens: thermal-sensor@4a9000 { + compatible = "qcom,qcs404-tsens", "qcom,tsens-v1"; + reg = <0x004a9000 0x1000>, /* TM */ + <0x004a8000 0x1000>; /* SROT */ + nvmem-cells = <&tsens_caldata>; + nvmem-cell-names = "calib"; + #qcom,sensors = <10>; + interrupts = ; + interrupt-names = "uplow"; + #thermal-sensor-cells = <1>; + }; + + pcnoc: interconnect@500000 { + reg = <0x00500000 0x15080>; + compatible = "qcom,qcs404-pcnoc"; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_PNOC_CLK>, + <&rpmcc RPM_SMD_PNOC_A_CLK>; + }; + + snoc: interconnect@580000 { + reg = <0x00580000 0x23080>; + compatible = "qcom,qcs404-snoc"; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_SNOC_CLK>, + <&rpmcc RPM_SMD_SNOC_A_CLK>; + }; + + remoteproc_cdsp: remoteproc@b00000 { + compatible = "qcom,qcs404-cdsp-pas"; + reg = <0x00b00000 0x4040>; + + interrupts-extended = <&intc GIC_SPI 229 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&xo_board>, + <&gcc GCC_CDSP_CFG_AHB_CLK>, + <&gcc GCC_CDSP_TBU_CLK>, + <&gcc GCC_BIMC_CDSP_CLK>, + <&turingcc TURING_WRAPPER_AON_CLK>, + <&turingcc TURING_Q6SS_AHBS_AON_CLK>, + <&turingcc TURING_Q6SS_AHBM_AON_CLK>, + <&turingcc TURING_Q6SS_Q6_AXIM_CLK>; + clock-names = "xo", + "sway", + "tbu", + "bimc", + "ahb_aon", + "q6ss_slave", + "q6ss_master", + "q6_axim"; + + resets = <&gcc GCC_CDSP_RESTART>; + reset-names = "restart"; + + qcom,halt-regs = <&tcsr 0x19004>; + + memory-region = <&cdsp_fw_mem>; + + qcom,smem-states = <&cdsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = ; + + qcom,remote-pid = <5>; + mboxes = <&apcs_glb 12>; + + label = "cdsp"; + }; + }; + + usb3: usb@7678800 { + compatible = "qcom,qcs404-dwc3", "qcom,dwc3"; + reg = <0x07678800 0x400>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&gcc GCC_USB30_MASTER_CLK>, + <&gcc GCC_SYS_NOC_USB3_CLK>, + <&gcc GCC_USB30_SLEEP_CLK>, + <&gcc GCC_USB30_MOCK_UTMI_CLK>; + clock-names = "core", "iface", "sleep", "mock_utmi"; + assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + status = "disabled"; + + usb3_dwc3: usb@7580000 { + compatible = "snps,dwc3"; + reg = <0x07580000 0xcd00>; + interrupts = ; + phys = <&usb2_phy_prim>, <&usb3_phy>; + phy-names = "usb2-phy", "usb3-phy"; + snps,has-lpm-erratum; + snps,hird-threshold = /bits/ 8 <0x10>; + snps,usb3_lpm_capable; + dr_mode = "otg"; + }; + }; + + usb2: usb@79b8800 { + compatible = "qcom,qcs404-dwc3", "qcom,dwc3"; + reg = <0x079b8800 0x400>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>, + <&gcc GCC_PCNOC_USB2_CLK>, + <&gcc GCC_USB_HS_INACTIVITY_TIMERS_CLK>, + <&gcc GCC_USB20_MOCK_UTMI_CLK>; + clock-names = "core", "iface", "sleep", "mock_utmi"; + assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>, + <&gcc GCC_USB_HS_SYSTEM_CLK>; + assigned-clock-rates = <19200000>, <133333333>; + status = "disabled"; + + usb@78c0000 { + compatible = "snps,dwc3"; + reg = <0x078c0000 0xcc00>; + interrupts = ; + phys = <&usb2_phy_sec>; + phy-names = "usb2-phy"; + snps,has-lpm-erratum; + snps,hird-threshold = /bits/ 8 <0x10>; + snps,usb3_lpm_capable; + dr_mode = "peripheral"; + }; + }; + + tlmm: pinctrl@1000000 { + compatible = "qcom,qcs404-pinctrl"; + reg = <0x01000000 0x200000>, + <0x01300000 0x200000>, + <0x07b00000 0x200000>; + reg-names = "south", "north", "east"; + interrupts = ; + gpio-ranges = <&tlmm 0 0 120>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + blsp1_i2c0_default: blsp1-i2c0-default { + pins = "gpio32", "gpio33"; + function = "blsp_i2c0"; + }; + + blsp1_i2c1_default: blsp1-i2c1-default { + pins = "gpio24", "gpio25"; + function = "blsp_i2c1"; + }; + + blsp1_i2c2_default: blsp1-i2c2-default { + sda { + pins = "gpio19"; + function = "blsp_i2c_sda_a2"; + }; + + scl { + pins = "gpio20"; + function = "blsp_i2c_scl_a2"; + }; + }; + + blsp1_i2c3_default: blsp1-i2c3-default { + pins = "gpio84", "gpio85"; + function = "blsp_i2c3"; + }; + + blsp1_i2c4_default: blsp1-i2c4-default { + pins = "gpio117", "gpio118"; + function = "blsp_i2c4"; + }; + + blsp1_uart0_default: blsp1-uart0-default { + pins = "gpio30", "gpio31", "gpio32", "gpio33"; + function = "blsp_uart0"; + }; + + blsp1_uart1_default: blsp1-uart1-default { + pins = "gpio22", "gpio23"; + function = "blsp_uart1"; + }; + + blsp1_uart2_default: blsp1-uart2-default { + rx { + pins = "gpio18"; + function = "blsp_uart_rx_a2"; + }; + + tx { + pins = "gpio17"; + function = "blsp_uart_tx_a2"; + }; + }; + + blsp1_uart3_default: blsp1-uart3-default { + pins = "gpio82", "gpio83", "gpio84", "gpio85"; + function = "blsp_uart3"; + }; + + blsp2_i2c0_default: blsp2-i2c0-default { + pins = "gpio28", "gpio29"; + function = "blsp_i2c5"; + }; + + blsp1_spi0_default: blsp1-spi0-default { + pins = "gpio30", "gpio31", "gpio32", "gpio33"; + function = "blsp_spi0"; + }; + + blsp1_spi1_default: blsp1-spi1-default { + mosi { + pins = "gpio22"; + function = "blsp_spi_mosi_a1"; + }; + + miso { + pins = "gpio23"; + function = "blsp_spi_miso_a1"; + }; + + cs_n { + pins = "gpio24"; + function = "blsp_spi_cs_n_a1"; + }; + + clk { + pins = "gpio25"; + function = "blsp_spi_clk_a1"; + }; + }; + + blsp1_spi2_default: blsp1-spi2-default { + pins = "gpio17", "gpio18", "gpio19", "gpio20"; + function = "blsp_spi2"; + }; + + blsp1_spi3_default: blsp1-spi3-default { + pins = "gpio82", "gpio83", "gpio84", "gpio85"; + function = "blsp_spi3"; + }; + + blsp1_spi4_default: blsp1-spi4-default { + pins = "gpio37", "gpio38", "gpio117", "gpio118"; + function = "blsp_spi4"; + }; + + blsp2_spi0_default: blsp2-spi0-default { + pins = "gpio26", "gpio27", "gpio28", "gpio29"; + function = "blsp_spi5"; + }; + + blsp2_uart0_default: blsp2-uart0-default { + pins = "gpio26", "gpio27", "gpio28", "gpio29"; + function = "blsp_uart5"; + }; + }; + + gcc: clock-controller@1800000 { + compatible = "qcom,gcc-qcs404"; + reg = <0x01800000 0x80000>; + #clock-cells = <1>; + #reset-cells = <1>; + + assigned-clocks = <&gcc GCC_APSS_AHB_CLK_SRC>; + assigned-clock-rates = <19200000>; + }; + + tcsr_mutex: hwlock@1905000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x01905000 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr: syscon@1937000 { + compatible = "qcom,qcs404-tcsr", "syscon"; + reg = <0x01937000 0x25000>; + }; + + sram@290000 { + compatible = "qcom,rpm-stats"; + reg = <0x00290000 0x10000>; + }; + + spmi_bus: spmi@200f000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0200f000 0x001000>, + <0x02400000 0x800000>, + <0x02c00000 0x800000>, + <0x03800000 0x200000>, + <0x0200a000 0x002100>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = ; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + remoteproc_wcss: remoteproc@7400000 { + compatible = "qcom,qcs404-wcss-pas"; + reg = <0x07400000 0x4040>; + + interrupts-extended = <&intc GIC_SPI 153 IRQ_TYPE_EDGE_RISING>, + <&wcss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&wcss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&wcss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&wcss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&xo_board>; + clock-names = "xo"; + + memory-region = <&wlan_fw_mem>; + + qcom,smem-states = <&wcss_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = ; + + qcom,remote-pid = <1>; + mboxes = <&apcs_glb 16>; + + label = "wcss"; + }; + }; + + pcie_phy: phy@7786000 { + compatible = "qcom,qcs404-pcie2-phy", "qcom,pcie2-phy"; + reg = <0x07786000 0xb8>; + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; + resets = <&gcc GCC_PCIEPHY_0_PHY_BCR>, + <&gcc GCC_PCIE_0_PIPE_ARES>; + reset-names = "phy", "pipe"; + + clock-output-names = "pcie_0_pipe_clk"; + #phy-cells = <0>; + + status = "disabled"; + }; + + sdcc1: mmc@7804000 { + compatible = "qcom,qcs404-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x07804000 0x1000>, <0x7805000 0x1000>; + reg-names = "hc", "cqhci"; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&xo_board>; + clock-names = "iface", "core", "xo"; + + status = "disabled"; + }; + + blsp1_dma: dma-controller@7884000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07884000 0x25000>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + status = "okay"; + }; + + blsp1_uart0: serial@78af000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078af000 0x200>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_UART0_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 0>, <&blsp1_dma 1>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_uart0_default>; + status = "disabled"; + }; + + blsp1_uart1: serial@78b0000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b0000 0x200>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 2>, <&blsp1_dma 3>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_uart1_default>; + status = "disabled"; + }; + + blsp1_uart2: serial@78b1000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b1000 0x200>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 4>, <&blsp1_dma 5>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_uart2_default>; + status = "okay"; + }; + + ethernet: ethernet@7a80000 { + compatible = "qcom,qcs404-ethqos"; + reg = <0x07a80000 0x10000>, + <0x07a96000 0x100>; + reg-names = "stmmaceth", "rgmii"; + clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii"; + clocks = <&gcc GCC_ETH_AXI_CLK>, + <&gcc GCC_ETH_SLAVE_AHB_CLK>, + <&gcc GCC_ETH_PTP_CLK>, + <&gcc GCC_ETH_RGMII_CLK>; + interrupts = , + ; + interrupt-names = "macirq", "eth_lpi"; + + snps,tso; + rx-fifo-depth = <4096>; + tx-fifo-depth = <4096>; + + status = "disabled"; + }; + + wifi: wifi@a000000 { + compatible = "qcom,wcn3990-wifi"; + reg = <0xa000000 0x800000>; + reg-names = "membase"; + memory-region = <&wlan_msa_mem>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + ; + status = "disabled"; + }; + + blsp1_uart3: serial@78b2000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b2000 0x200>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 6>, <&blsp1_dma 7>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_uart3_default>; + status = "disabled"; + }; + + blsp1_i2c0: i2c@78b5000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b5000 0x600>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP0_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_i2c0_default>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp1_spi0: spi@78b5000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b5000 0x600>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP0_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_spi0_default>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp1_i2c1: i2c@78b6000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b6000 0x600>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_i2c1_default>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp1_spi1: spi@78b6000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b6000 0x600>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_spi1_default>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp1_i2c2: i2c@78b7000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b7000 0x600>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_i2c2_default>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp1_spi2: spi@78b7000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b7000 0x600>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_spi2_default>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp1_i2c3: i2c@78b8000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b8000 0x600>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_i2c3_default>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp1_spi3: spi@78b8000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b8000 0x600>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_spi3_default>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp1_i2c4: i2c@78b9000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b9000 0x600>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_i2c4_default>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp1_spi4: spi@78b9000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b9000 0x600>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_spi4_default>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp2_dma: dma-controller@7ac4000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07ac4000 0x17000>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + status = "disabled"; + }; + + blsp2_uart0: serial@7aef000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x07aef000 0x200>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_UART0_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp2_dma 0>, <&blsp2_dma 1>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp2_uart0_default>; + status = "disabled"; + }; + + blsp2_i2c0: i2c@7af5000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x07af5000 0x600>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_QUP0_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp2_i2c0_default>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp2_spi0: spi@7af5000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x07af5000 0x600>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_QUP0_SPI_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp2_spi0_default>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + sram@8600000 { + compatible = "qcom,qcs404-imem", "syscon", "simple-mfd"; + reg = <0x08600000 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0 0x08600000 0x1000>; + + pil-reloc@94c { + compatible = "qcom,pil-reloc-info"; + reg = <0x94c 0xc8>; + }; + }; + + intc: interrupt-controller@b000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x0b000000 0x1000>, + <0x0b002000 0x1000>; + }; + + apcs_glb: mailbox@b011000 { + compatible = "qcom,qcs404-apcs-apps-global", "syscon"; + reg = <0x0b011000 0x1000>; + #mbox-cells = <1>; + clocks = <&apcs_hfpll>, <&gcc GCC_GPLL0_AO_OUT_MAIN>; + clock-names = "pll", "aux"; + #clock-cells = <0>; + }; + + apcs_hfpll: clock-controller@b016000 { + compatible = "qcom,hfpll"; + reg = <0x0b016000 0x30>; + #clock-cells = <0>; + clock-output-names = "apcs_hfpll"; + clocks = <&xo_board>; + clock-names = "xo"; + }; + + watchdog@b017000 { + compatible = "qcom,apss-wdt-qcs404", "qcom,kpss-wdt"; + reg = <0x0b017000 0x1000>; + clocks = <&sleep_clk>; + }; + + cpr: power-controller@b018000 { + compatible = "qcom,qcs404-cpr", "qcom,cpr"; + reg = <0x0b018000 0x1000>; + interrupts = <0 15 IRQ_TYPE_EDGE_RISING>; + clocks = <&xo_board>; + clock-names = "ref"; + vdd-apc-supply = <&pms405_s3>; + #power-domain-cells = <0>; + operating-points-v2 = <&cpr_opp_table>; + acc-syscon = <&tcsr>; + + nvmem-cells = <&cpr_efuse_quot_offset1>, + <&cpr_efuse_quot_offset2>, + <&cpr_efuse_quot_offset3>, + <&cpr_efuse_init_voltage1>, + <&cpr_efuse_init_voltage2>, + <&cpr_efuse_init_voltage3>, + <&cpr_efuse_quot1>, + <&cpr_efuse_quot2>, + <&cpr_efuse_quot3>, + <&cpr_efuse_ring1>, + <&cpr_efuse_ring2>, + <&cpr_efuse_ring3>, + <&cpr_efuse_revision>; + nvmem-cell-names = "cpr_quotient_offset1", + "cpr_quotient_offset2", + "cpr_quotient_offset3", + "cpr_init_voltage1", + "cpr_init_voltage2", + "cpr_init_voltage3", + "cpr_quotient1", + "cpr_quotient2", + "cpr_quotient3", + "cpr_ring_osc1", + "cpr_ring_osc2", + "cpr_ring_osc3", + "cpr_fuse_revision"; + }; + + timer@b120000 { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0x0b120000 0x1000>; + clock-frequency = <19200000>; + + frame@b121000 { + frame-number = <0>; + interrupts = , + ; + reg = <0x0b121000 0x1000>, + <0x0b122000 0x1000>; + }; + + frame@b123000 { + frame-number = <1>; + interrupts = ; + reg = <0x0b123000 0x1000>; + status = "disabled"; + }; + + frame@b124000 { + frame-number = <2>; + interrupts = ; + reg = <0x0b124000 0x1000>; + status = "disabled"; + }; + + frame@b125000 { + frame-number = <3>; + interrupts = ; + reg = <0x0b125000 0x1000>; + status = "disabled"; + }; + + frame@b126000 { + frame-number = <4>; + interrupts = ; + reg = <0x0b126000 0x1000>; + status = "disabled"; + }; + + frame@b127000 { + frame-number = <5>; + interrupts = ; + reg = <0xb127000 0x1000>; + status = "disabled"; + }; + + frame@b128000 { + frame-number = <6>; + interrupts = ; + reg = <0x0b128000 0x1000>; + status = "disabled"; + }; + }; + + remoteproc_adsp: remoteproc@c700000 { + compatible = "qcom,qcs404-adsp-pas"; + reg = <0x0c700000 0x4040>; + + interrupts-extended = <&intc GIC_SPI 293 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&xo_board>; + clock-names = "xo"; + + memory-region = <&adsp_fw_mem>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = ; + + qcom,remote-pid = <2>; + mboxes = <&apcs_glb 8>; + + label = "adsp"; + }; + }; + + pcie: pci@10000000 { + compatible = "qcom,pcie-qcs404"; + reg = <0x10000000 0xf1d>, + <0x10000f20 0xa8>, + <0x07780000 0x2000>, + <0x10001000 0x2000>; + reg-names = "dbi", "elbi", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x81000000 0 0 0x10003000 0 0x00010000>, /* I/O */ + <0x82000000 0 0x10013000 0x10013000 0 0x007ed000>; /* memory */ + + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + clocks = <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>; + clock-names = "iface", "aux", "master_bus", "slave_bus"; + + resets = <&gcc GCC_PCIE_0_AXI_MASTER_ARES>, + <&gcc GCC_PCIE_0_AXI_SLAVE_ARES>, + <&gcc GCC_PCIE_0_AXI_MASTER_STICKY_ARES>, + <&gcc GCC_PCIE_0_CORE_STICKY_ARES>, + <&gcc GCC_PCIE_0_BCR>, + <&gcc GCC_PCIE_0_AHB_ARES>; + reset-names = "axi_m", + "axi_s", + "axi_m_sticky", + "pipe_sticky", + "pwr", + "ahb"; + + phys = <&pcie_phy>; + phy-names = "pciephy"; + + status = "disabled"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; + + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + interrupts = ; + mboxes = <&apcs_glb 10>; + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-cdsp { + compatible = "qcom,smp2p"; + qcom,smem = <94>, <432>; + interrupts = ; + mboxes = <&apcs_glb 14>; + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + cdsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + cdsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-wcss { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + interrupts = ; + mboxes = <&apcs_glb 18>; + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + wcss_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + wcss_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + thermal-zones { + aoss-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 0>; + + trips { + aoss_alert0: trip-point0 { + temperature = <105000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + q6-hvx-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 1>; + + trips { + q6_hvx_alert0: trip-point0 { + temperature = <105000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + lpass-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 2>; + + trips { + lpass_alert0: trip-point0 { + temperature = <105000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + wlan-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 3>; + + trips { + wlan_alert0: trip-point0 { + temperature = <105000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + cluster-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 4>; + + trips { + cluster_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + cluster_alert1: trip-point1 { + temperature = <105000>; + hysteresis = <2000>; + type = "passive"; + }; + cluster_crit: cluster_crit { + temperature = <120000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cluster_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 5>; + + trips { + cpu0_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + cpu0_alert1: trip-point1 { + temperature = <105000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu0_crit: cpu_crit { + temperature = <120000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu0_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 6>; + + trips { + cpu1_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + cpu1_alert1: trip-point1 { + temperature = <105000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu1_crit: cpu_crit { + temperature = <120000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu1_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 7>; + + trips { + cpu2_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + cpu2_alert1: trip-point1 { + temperature = <105000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu2_crit: cpu_crit { + temperature = <120000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu2_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 8>; + + trips { + cpu3_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + cpu3_alert1: trip-point1 { + temperature = <105000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu3_crit: cpu_crit { + temperature = <120000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu3_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + gpu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 9>; + + trips { + gpu_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts new file mode 100644 index 000000000..1defbe040 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts @@ -0,0 +1,1334 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Linaro Ltd. + */ + +/dts-v1/; + +#include +#include +#include +#include +#include "sm8250.dtsi" +#include "pm8150.dtsi" +#include "pm8150b.dtsi" +#include "pm8150l.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. Robotics RB5"; + compatible = "qcom,qrb5165-rb5", "qcom,sm8250"; + qcom,msm-id = <455 0x20001>; + qcom,board-id = <11 3>; + + aliases { + serial0 = &uart12; + sdhc2 = &sdhc_2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + /* Fixed crystal oscillator dedicated to MCP2518FD */ + clk40M: can-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <40000000>; + }; + + dc12v: dc12v-regulator { + compatible = "regulator-fixed"; + regulator-name = "DC12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <<9611_out>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-user4 { + label = "green:user4"; + function = LED_FUNCTION_INDICATOR; + color = ; + gpios = <&pm8150_gpios 10 GPIO_ACTIVE_HIGH>; + default-state = "off"; + panic-indicator; + }; + + led-wlan { + label = "yellow:wlan"; + function = LED_FUNCTION_WLAN; + color = ; + gpios = <&pm8150_gpios 9 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + + led-bt { + label = "blue:bt"; + function = LED_FUNCTION_BLUETOOTH; + color = ; + gpios = <&pm8150_gpios 7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "bluetooth-power"; + default-state = "off"; + }; + }; + + lt9611_1v2: lt9611-vdd12-regulator { + compatible = "regulator-fixed"; + regulator-name = "LT9611_1V2"; + + vin-supply = <&vdc_3v3>; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + lt9611_3v3: lt9611-3v3 { + compatible = "regulator-fixed"; + regulator-name = "LT9611_3V3"; + + vin-supply = <&vdc_3v3>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + thermal-zones { + conn-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150b_adc_tm 0>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + pm8150l-pcb-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150l_adc_tm 1>; + + trips { + active-config0 { + temperature = <50000>; + hysteresis = <4000>; + type = "passive"; + }; + }; + }; + + skin-msm-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150l_adc_tm 0>; + + trips { + active-config0 { + temperature = <50000>; + hysteresis = <4000>; + type = "passive"; + }; + }; + }; + + wifi-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150_adc_tm 1>; + + trips { + active-config0 { + temperature = <52000>; + hysteresis = <4000>; + type = "passive"; + }; + }; + }; + + xo-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150_adc_tm 0>; + + trips { + active-config0 { + temperature = <50000>; + hysteresis = <4000>; + type = "passive"; + }; + }; + }; + }; + + vbat: vbat-regulator { + compatible = "regulator-fixed"; + regulator-name = "VBAT"; + vin-supply = <&vreg_l11c_3p3>; + regulator-min-microvolt = <4200000>; + regulator-max-microvolt = <4200000>; + regulator-always-on; + }; + + vbat_som: vbat-som-regulator { + compatible = "regulator-fixed"; + regulator-name = "VBAT_SOM"; + vin-supply = <&dc12v>; + regulator-min-microvolt = <4200000>; + regulator-max-microvolt = <4200000>; + regulator-always-on; + }; + + vdc_3v3: vdc-3v3-regulator { + compatible = "regulator-fixed"; + regulator-name = "VDC_3V3"; + vin-supply = <&vreg_l11c_3p3>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdc_5v: vdc-5v-regulator { + compatible = "regulator-fixed"; + regulator-name = "VDC_5V"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <&vreg_l11c_3p3>; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + }; + + vreg_s4a_1p8: vreg-s4a-1p8 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; +}; + +&adsp { + status = "okay"; + firmware-name = "qcom/sm8250/adsp.mbn"; +}; + +&apps_rsc { + pm8009-rpmh-regulators { + compatible = "qcom,pm8009-1-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-l2-supply = <&vreg_s8c_1p3>; + vdd-l5-l6-supply = <&vreg_bob>; + vdd-l7-supply = <&vreg_s4a_1p8>; + + vreg_s2f_0p95: smps2 { + regulator-name = "vreg_s2f_0p95"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <952000>; + regulator-initial-mode = ; + }; + + vreg_l1f_1p1: ldo1 { + regulator-name = "vreg_l1f_1p1"; + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1104000>; + regulator-initial-mode = ; + }; + + vreg_l2f_1p2: ldo2 { + regulator-name = "vreg_l2f_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l6f_2p8: ldo6 { + regulator-name = "vreg_l6f_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = ; + }; + + vreg_l7f_1p8: ldo7 { + regulator-name = "vreg_l7f_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + }; + + pm8150-rpmh-regulators { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-l2-l10-supply = <&vreg_bob>; + vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>; + vdd-l6-l9-supply = <&vreg_s8c_1p3>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>; + vdd-l13-l16-l17-supply = <&vreg_bob>; + + vreg_l2a_3p1: ldo2 { + regulator-name = "vreg_l2a_3p1"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + }; + + vreg_l3a_0p9: ldo3 { + regulator-name = "vreg_l3a_0p9"; + regulator-min-microvolt = <928000>; + regulator-max-microvolt = <932000>; + regulator-initial-mode = ; + }; + + vreg_l5a_0p88: ldo5 { + regulator-name = "vreg_l5a_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + }; + + vreg_l6a_1p2: ldo6 { + regulator-name = "vreg_l6a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l7a_1p7: ldo7 { + regulator-name = "vreg_l7a_1p7"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l9a_1p2: ldo9 { + regulator-name = "vreg_l9a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l10a_1p8: ldo10 { + regulator-name = "vreg_l10a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l12a_1p8: ldo12 { + regulator-name = "vreg_l12a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l13a_ts_3p0: ldo13 { + regulator-name = "vreg_l13a_ts_3p0"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l14a_1p8: ldo14 { + regulator-name = "vreg_l14a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1880000>; + regulator-initial-mode = ; + }; + + vreg_l15a_1p8: ldo15 { + regulator-name = "vreg_l15a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l16a_2p7: ldo16 { + regulator-name = "vreg_l16a_2p7"; + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l17a_3p0: ldo17 { + regulator-name = "vreg_l17a_3p0"; + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l18a_0p92: ldo18 { + regulator-name = "vreg_l18a_0p92"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + }; + + vreg_s5a_1p9: smps5 { + regulator-name = "vreg_s5a_1p9"; + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = ; + }; + + vreg_s6a_0p95: smps6 { + regulator-name = "vreg_s6a_0p95"; + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <1128000>; + regulator-initial-mode = ; + }; + }; + + pm8150l-rpmh-regulators { + compatible = "qcom,pm8150l-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-l1-l8-supply = <&vreg_s4a_1p8>; + vdd-l2-l3-supply = <&vreg_s8c_1p3>; + vdd-l4-l5-l6-supply = <&vreg_bob>; + vdd-l7-l11-supply = <&vreg_bob>; + vdd-l9-l10-supply = <&vreg_bob>; + vdd-bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-name = "vreg_bob"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <4000000>; + regulator-initial-mode = ; + }; + + vreg_l1c_1p8: ldo1 { + regulator-name = "vreg_l1c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l2c_1p2: ldo2 { + regulator-name = "vreg_l2c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l3c_0p8: ldo3 { + regulator-name = "vreg_l3c_0p8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = ; + }; + + vreg_l4c_1p7: ldo4 { + regulator-name = "vreg_l4c_1p7"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = ; + }; + + vreg_l5c_1p8: ldo5 { + regulator-name = "vreg_l5c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = ; + }; + + vreg_l6c_2p96: ldo6 { + regulator-name = "vreg_l6c_2p96"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l7c_cam_vcm0_2p85: ldo7 { + regulator-name = "vreg_l7c_cam_vcm0_2p85"; + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = ; + }; + + vreg_l8c_1p8: ldo8 { + regulator-name = "vreg_l8c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l9c_2p96: ldo9 { + regulator-name = "vreg_l9c_2p96"; + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l10c_3p0: ldo10 { + regulator-name = "vreg_l10c_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = ; + }; + + vreg_l11c_3p3: ldo11 { + regulator-name = "vreg_l11c_3p3"; + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3296000>; + regulator-initial-mode = ; + regulator-always-on; + }; + + vreg_s8c_1p3: smps8 { + regulator-name = "vreg_s8c_1p3"; + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + regulator-initial-mode = ; + }; + }; +}; + +&cdsp { + status = "okay"; + firmware-name = "qcom/sm8250/cdsp.mbn"; +}; + +&dsi0 { + status = "okay"; + vdda-supply = <&vreg_l9a_1p2>; + +#if 0 + qcom,dual-dsi-mode; + qcom,master-dsi; +#endif + + ports { + port@1 { + endpoint { + remote-endpoint = <<9611_a>; + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&dsi0_phy { + status = "okay"; + vdds-supply = <&vreg_l5a_0p88>; +}; + +&gmu { + status = "okay"; +}; + +&gpu { + status = "okay"; + + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sm8250/a650_zap.mbn"; + }; +}; + +/* LS-I2C0 */ +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; + clock-frequency = <400000>; + + lt9611_codec: hdmi-bridge@2b { + compatible = "lontium,lt9611uxc"; + reg = <0x2b>; + #sound-dai-cells = <1>; + + interrupts-extended = <&tlmm 63 IRQ_TYPE_EDGE_FALLING>; + + reset-gpios = <&pm8150l_gpios 5 GPIO_ACTIVE_HIGH>; + + vdd-supply = <<9611_1v2>; + vcc-supply = <<9611_3v3>; + + pinctrl-names = "default"; + pinctrl-0 = <<9611_irq_pin <9611_rst_pin>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lt9611_a: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + +#if 0 + port@1 { + reg = <1>; + + lt9611_b: endpoint { + remote-endpoint = <&dsi1_out>; + }; + }; +#endif + + port@2 { + reg = <2>; + + lt9611_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + + }; + }; +}; + +/* LS-I2C1 */ +&i2c15 { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mdss_mdp { + status = "okay"; +}; + +&pm8150_adc { + xo-therm@4c { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + wifi-therm@4e { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&pm8150_adc_tm { + status = "okay"; + + xo-therm@0 { + reg = <0>; + io-channels = <&pm8150_adc ADC5_XO_THERM_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + wifi-therm@1 { + reg = <1>; + io-channels = <&pm8150_adc ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie0_phy { + status = "okay"; + vdda-phy-supply = <&vreg_l5a_0p88>; + vdda-pll-supply = <&vreg_l9a_1p2>; +}; + +&pcie1 { + status = "okay"; +}; + +&pcie1_phy { + status = "okay"; + vdda-phy-supply = <&vreg_l5a_0p88>; + vdda-pll-supply = <&vreg_l9a_1p2>; +}; + +&pcie2 { + status = "okay"; +}; + +&pcie2_phy { + status = "okay"; + vdda-phy-supply = <&vreg_l5a_0p88>; + vdda-pll-supply = <&vreg_l9a_1p2>; +}; + +&pm8150_gpios { + gpio-reserved-ranges = <1 1>, <3 2>, <7 1>; + gpio-line-names = + "NC", + "OPTION2", + "PM_GPIO-F", + "PM_SLP_CLK_IN", + "OPTION1", + "VOL_UP_N", + "PM8250_GPIO7", /* Blue LED */ + "SP_ARI_PWR_ALARM", + "GPIO_9_P", /* Yellow LED */ + "GPIO_10_P"; /* Green LED */ +}; + +&pm8150b_adc { + conn-therm@4f { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&pm8150b_adc_tm { + status = "okay"; + + conn-therm@0 { + reg = <0>; + io-channels = <&pm8150b_adc ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pm8150b_gpios { + gpio-line-names = + "NC", + "NC", + "NC", + "NC", + "HAP_BOOST_EN", /* SOM */ + "SMB_STAT", /* SOM */ + "NC", + "NC", + "SDM_FORCE_USB_BOOT", + "NC", + "NC", + "NC"; +}; + +&pm8150l_adc { + skin-msm-therm@4e { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + pm8150l-therm@4f { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&pm8150l_adc_tm { + status = "okay"; + + skin-msm-therm@0 { + reg = <0>; + io-channels = <&pm8150l_adc ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + pm8150l-therm@1 { + reg = <1>; + io-channels = <&pm8150l_adc ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pm8150l_gpios { + gpio-line-names = + "NC", + "PM3003A_EN", + "NC", + "NC", + "PM_GPIO5", /* HDMI RST_N */ + "PM_GPIO-A", /* PWM */ + "PM_GPIO7", + "NC", + "NC", + "PM_GPIO-B", + "NC", + "PM3003A_MODE"; + + lt9611_rst_pin: lt9611-rst-state { + pins = "gpio5"; + function = "normal"; + + output-high; + input-disable; + power-source = <0>; + }; +}; + +&pm8150l_lpg { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + color = ; + function = LED_FUNCTION_HEARTBEAT; + function-enumerator = <3>; + + linux,default-trigger = "heartbeat"; + default-state = "on"; + }; + + led@2 { + reg = <2>; + color = ; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <2>; + default-state = "on"; + }; + + led@3 { + reg = <3>; + color = ; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <1>; + }; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + status = "okay"; + + linux,code = ; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&qupv3_id_2 { + status = "okay"; +}; + +&q6afedai { + qi2s@16 { + reg = ; + qcom,sd-lines = <0 1 2 3>; + }; +}; + +/* TERT I2S Uses 1 I2S SD Lines for audio on LT9611 HDMI Bridge */ +&q6afedai { + qi2s@20 { + reg = ; + qcom,sd-lines = <0>; + }; +}; + +&q6asmdai { + dai@0 { + reg = <0>; + }; + + dai@1 { + reg = <1>; + }; + + dai@2 { + reg = <2>; + }; +}; + +&sdhc_2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>; + vmmc-supply = <&vreg_l9c_2p96>; + vqmmc-supply = <&vreg_l6c_2p96>; + cd-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>; + bus-width = <4>; + no-sdio; + no-emmc; +}; + +&sound { + compatible = "qcom,qrb5165-rb5-sndcard"; + pinctrl-0 = <&tert_mi2s_active>; + pinctrl-names = "default"; + model = "Qualcomm-RB5-WSA8815-Speakers-DMIC0"; + audio-routing = + "SpkrLeft IN", "WSA_SPK1 OUT", + "SpkrRight IN", "WSA_SPK2 OUT", + "VA DMIC0", "vdd-micb", + "VA DMIC1", "vdd-micb", + "MM_DL1", "MultiMedia1 Playback", + "MM_DL2", "MultiMedia2 Playback", + "MultiMedia3 Capture", "MM_UL3"; + + mm1-dai-link { + link-name = "MultiMedia1"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + mm2-dai-link { + link-name = "MultiMedia2"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + mm3-dai-link { + link-name = "MultiMedia3"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + hdmi-dai-link { + link-name = "HDMI Playback"; + cpu { + sound-dai = <&q6afedai TERTIARY_MI2S_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <<9611_codec 0>; + }; + }; + + dma-dai-link { + link-name = "WSA Playback"; + cpu { + sound-dai = <&q6afedai WSA_CODEC_DMA_RX_0>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&wsamacro 0>; + }; + }; + + va-dai-link { + link-name = "VA Capture"; + cpu { + sound-dai = <&q6afedai VA_CODEC_DMA_TX_0>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&vamacro 0>; + }; + }; +}; + +/* CAN */ +&spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs_gpio>; + cs-gpios = <&tlmm 31 GPIO_ACTIVE_LOW>; + + can@0 { + compatible = "microchip,mcp2518fd"; + reg = <0>; + clocks = <&clk40M>; + interrupts-extended = <&tlmm 15 IRQ_TYPE_LEVEL_LOW>; + spi-max-frequency = <10000000>; + vdd-supply = <&vdc_5v>; + xceiver-supply = <&vdc_5v>; + }; +}; + +&swr0 { + left_spkr: wsa8810-left{ + compatible = "sdw10217211000"; + reg = <0 3>; + powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_HIGH>; + #thermal-sensor-cells = <0>; + sound-name-prefix = "SpkrLeft"; + #sound-dai-cells = <0>; + }; + + right_spkr: wsa8810-right{ + compatible = "sdw10217211000"; + reg = <0 4>; + powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_HIGH>; + #thermal-sensor-cells = <0>; + sound-name-prefix = "SpkrRight"; + #sound-dai-cells = <0>; + }; +}; + +&tlmm { + gpio-reserved-ranges = <40 4>; + gpio-line-names = + "GPIO-MM", + "GPIO-NN", + "GPIO-OO", + "GPIO-PP", + "GPIO-A", + "GPIO-C", + "GPIO-E", + "GPIO-D", + "I2C0-SDA", + "I2C0-SCL", + "GPIO-TT", /* GPIO_10 */ + "NC", + "GPIO_12_I2C_SDA", + "GPIO_13_I2C_SCL", + "GPIO-X", + "GPIO_15_RGMII_INT", + "HST_BT_UART_CTS", + "HST_BT_UART_RFR", + "HST_BT_UART_TX", + "HST_BT_UART_RX", + "HST_WLAN_EN", /* GPIO_20 */ + "HST_BT_EN", + "GPIO-AAA", + "GPIO-BBB", + "GPIO-CCC", + "GPIO-Z", + "GPIO-DDD", + "GPIO-BB", + "GPIO_28_CAN_SPI_MISO", + "GPIO_29_CAN_SPI_MOSI", + "GPIO_30_CAN_SPI_CLK", /* GPIO_30 */ + "GPIO_31_CAN_SPI_CS", + "GPIO-UU", + "NC", + "UART1_TXD_SOM", + "UART1_RXD_SOM", + "UART0_CTS", + "UART0_RTS", + "UART0_TXD", + "UART0_RXD", + "SPI1_MISO", /* GPIO_40 */ + "SPI1_MOSI", + "SPI1_CLK", + "SPI1_CS", + "I2C1_SDA", + "I2C1_SCL", + "GPIO-F", + "GPIO-JJ", + "Board_ID1", + "Board_ID2", + "NC", /* GPIO_50 */ + "NC", + "SPI0_MISO", + "SPI0_MOSI", + "SPI0_SCLK", + "SPI0_CS", + "GPIO-QQ", + "GPIO-RR", + "USB2LAN_RESET", + "USB2LAN_EXTWAKE", + "NC", /* GPIO_60 */ + "NC", + "NC", + "LT9611_INT", + "GPIO-AA", + "USB_CC_DIR", + "GPIO-G", + "GPIO-LL", + "USB_DP_HPD_1P8", + "NC", + "NC", /* GPIO_70 */ + "SD_CMD", + "SD_DAT3", + "SD_SCLK", + "SD_DAT2", + "SD_DAT1", + "SD_DAT0", /* BOOT_CFG3 */ + "SD_UFS_CARD_DET_N", + "GPIO-II", + "PCIE0_RST_N", + "PCIE0_CLK_REQ_N", /* GPIO_80 */ + "PCIE0_WAKE_N", + "GPIO-CC", + "GPIO-DD", + "GPIO-EE", + "GPIO-FF", + "GPIO-GG", + "GPIO-HH", + "GPIO-VV", + "GPIO-WW", + "NC", /* GPIO_90 */ + "NC", + "GPIO-K", + "GPIO-I", + "CSI0_MCLK", + "CSI1_MCLK", + "CSI2_MCLK", + "CSI3_MCLK", + "GPIO-AA", /* CSI4_MCLK */ + "GPIO-BB", /* CSI5_MCLK */ + "GPIO-KK", /* GPIO_100 */ + "CCI_I2C_SDA0", + "CCI_I2C_SCL0", + "CCI_I2C_SDA1", + "CCI_I2C_SCL1", + "CCI_I2C_SDA2", + "CCI_I2C_SCL2", + "CCI_I2C_SDA3", + "CCI_I2C_SCL3", + "GPIO-L", + "NC", /* GPIO_110 */ + "NC", + "ACCEL_INT", + "GYRO_INT", + "GPIO-J", + "GPIO-YY", + "GPIO-H", + "GPIO-ZZ", + "NC", + "NC", + "NC", /* GPIO_120 */ + "NC", + "MAG_INT", + "MAG_DRDY_INT", + "HST_SW_CTRL", + "GPIO-M", + "GPIO-N", + "GPIO-O", + "GPIO-P", + "PS_INT", + "WSA1_EN", /* GPIO_130 */ + "USB_HUB_RESET", + "SDM_FORCE_USB_BOOT", + "I2S1_CLK_HDMI", + "I2S1_DATA0_HDMI", + "I2S1_WS_HDMI", + "GPIO-B", + "GPIO_137", /* To LT9611_I2S_MCLK_3V3 */ + "PCM_CLK", + "PCM_DI", + "PCM_DO", /* GPIO_140 */ + "PCM_FS", + "HST_SLIM_CLK", + "HST_SLIM_DATA", + "GPIO-U", + "GPIO-Y", + "GPIO-R", + "GPIO-Q", + "GPIO-S", + "GPIO-T", + "GPIO-V", /* GPIO_150 */ + "GPIO-W", + "DMIC_CLK1", + "DMIC_DATA1", + "DMIC_CLK2", + "DMIC_DATA2", + "WSA_SWR_CLK", + "WSA_SWR_DATA", + "DMIC_CLK3", + "DMIC_DATA3", + "I2C4_SDA", /* GPIO_160 */ + "I2C4_SCL", + "SPI3_CS1", + "SPI3_CS2", + "SPI2_MISO_LS3", + "SPI2_MOSI_LS3", + "SPI2_CLK_LS3", + "SPI2_ACCEL_CS_LS3", + "SPI2_CS1", + "NC", + "GPIO-SS", /* GPIO_170 */ + "GPIO-XX", + "SPI3_MISO", + "SPI3_MOSI", + "SPI3_CLK", + "SPI3_CS", + "HST_BLE_SNS_UART_TX", + "HST_BLE_SNS_UART_RX", + "HST_WLAN_UART_TX", + "HST_WLAN_UART_RX"; + + lt9611_irq_pin: lt9611-irq { + pins = "gpio63"; + function = "gpio"; + bias-disable; + }; + + sdc2_default_state: sdc2-default { + clk { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + }; + + sdc2_card_det_n: sd-card-det-n { + pins = "gpio77"; + function = "gpio"; + bias-pull-up; + }; +}; + +&uart12 { + status = "okay"; +}; + +&ufs_mem_hc { + status = "okay"; + + vcc-supply = <&vreg_l17a_3p0>; + vcc-max-microamp = <800000>; + vccq-supply = <&vreg_l6a_1p2>; + vccq-max-microamp = <800000>; + vccq2-supply = <&vreg_s4a_1p8>; + vccq2-max-microamp = <800000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l5a_0p88>; + vdda-pll-supply = <&vreg_l9a_1p2>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdda-pll-supply = <&vreg_l5a_0p88>; + vdda33-supply = <&vreg_l2a_3p1>; + vdda18-supply = <&vreg_l12a_1p8>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l9a_1p2>; + vdda-pll-supply = <&vreg_l18a_0p92>; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; +}; + +&usb_2_hsphy { + status = "okay"; + + vdda-pll-supply = <&vreg_l5a_0p88>; + vdda33-supply = <&vreg_l2a_3p1>; + vdda18-supply = <&vreg_l12a_1p8>; +}; + +&usb_2_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l9a_1p2>; + vdda-pll-supply = <&vreg_l18a_0p92>; +}; + +&vamacro { + pinctrl-0 = <&dmic01_active>; + pinctrl-names = "default"; + vdd-micb-supply = <&vreg_s4a_1p8>; + qcom,dmic-sample-rate = <600000>; +}; + +&venus { + status = "okay"; +}; + +/* PINCTRL - additions to nodes defined in sm8250.dtsi */ +&qup_spi0_cs_gpio { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi0_data_clk { + drive-strength = <6>; + bias-disable; +}; diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts new file mode 100644 index 000000000..4dee790f1 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts @@ -0,0 +1,611 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Linaro Limited + */ + +/dts-v1/; + +#include +#include +#include "sm8150.dtsi" +#include "pmm8155au_1.dtsi" +#include "pmm8155au_2.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SA8155P ADP"; + compatible = "qcom,sa8155p-adp", "qcom,sa8155p"; + + aliases { + serial0 = &uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vreg_3p3: vreg_3p3_regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_3p3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + /* + * S4A is always on and not controllable through RPMh. + * So model it as a fixed regulator. + */ + vreg_s4a_1p8: smps4 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vreg_3p3>; + }; + + mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <1>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + snps,route-up; + snps,priority = <0x1>; + }; + }; + + mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <1>; + snps,tx-sched-wrr; + + queue0 { + snps,weight = <0x10>; + snps,dcb-algorithm; + snps,priority = <0x0>; + }; + }; +}; + +&apps_rsc { + pmm8155au-1-rpmh-regulators { + compatible = "qcom,pmm8155au-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vreg_3p3>; + vdd-s2-supply = <&vreg_3p3>; + vdd-s3-supply = <&vreg_3p3>; + vdd-s4-supply = <&vreg_3p3>; + vdd-s5-supply = <&vreg_3p3>; + vdd-s6-supply = <&vreg_3p3>; + vdd-s7-supply = <&vreg_3p3>; + vdd-s8-supply = <&vreg_3p3>; + vdd-s9-supply = <&vreg_3p3>; + vdd-s10-supply = <&vreg_3p3>; + + vdd-l1-l8-l11-supply = <&vreg_s6a_0p92>; + vdd-l2-l10-supply = <&vreg_3p3>; + vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p92>; + vdd-l6-l9-supply = <&vreg_s6a_0p92>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; + vdd-l13-l16-l17-supply = <&vreg_3p3>; + + vreg_s5a_2p04: smps5 { + regulator-name = "vreg_s5a_2p04"; + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2000000>; + }; + + vreg_s6a_0p92: smps6 { + regulator-name = "vreg_s6a_0p92"; + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <1128000>; + }; + + vreg_l1a_0p752: ldo1 { + regulator-name = "vreg_l1a_0p752"; + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <752000>; + regulator-initial-mode = ; + }; + + vdda_usb_hs_3p1: + vreg_l2a_3p072: ldo2 { + regulator-name = "vreg_l2a_3p072"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + }; + + vreg_l3a_0p8: ldo3 { + regulator-name = "vreg_l3a_0p8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = ; + }; + + vdd_usb_hs_core: + vdda_usb_ss_dp_core_1: + vreg_l5a_0p88: ldo5 { + regulator-name = "vreg_l5a_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = + ; + }; + + vreg_l7a_1p8: ldo7 { + regulator-name = "vreg_l7a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l10a_2p96: ldo10 { + regulator-name = "vreg_l10a_2p96"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = + ; + }; + + vreg_l11a_0p8: ldo11 { + regulator-name = "vreg_l11a_0p8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = ; + }; + + vdda_usb_hs_1p8: + vreg_l12a_1p8: ldo12 { + regulator-name = "vreg_l12a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l13a_2p7: ldo13 { + regulator-name = "vreg_l13a_2p7"; + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + regulator-initial-mode = ; + }; + + vreg_l15a_1p7: ldo15 { + regulator-name = "vreg_l15a_1p7"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1704000>; + regulator-initial-mode = ; + }; + + vreg_l16a_2p7: ldo16 { + regulator-name = "vreg_l16a_2p7"; + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l17a_2p96: ldo17 { + regulator-name = "vreg_l17a_2p96"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + }; + + pmm8155au-2-rpmh-regulators { + compatible = "qcom,pmm8155au-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vreg_3p3>; + vdd-s2-supply = <&vreg_3p3>; + vdd-s3-supply = <&vreg_3p3>; + vdd-s4-supply = <&vreg_3p3>; + vdd-s5-supply = <&vreg_3p3>; + vdd-s6-supply = <&vreg_3p3>; + vdd-s7-supply = <&vreg_3p3>; + vdd-s8-supply = <&vreg_3p3>; + vdd-s9-supply = <&vreg_3p3>; + vdd-s10-supply = <&vreg_3p3>; + + vdd-l1-l8-l11-supply = <&vreg_s4c_1p352>; + vdd-l2-l10-supply = <&vreg_3p3>; + vdd-l3-l4-l5-l18-supply = <&vreg_s4c_1p352>; + vdd-l6-l9-supply = <&vreg_s6c_1p128>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5c_2p04>; + vdd-l13-l16-l17-supply = <&vreg_3p3>; + + vreg_s4c_1p352: smps4 { + regulator-name = "vreg_s4c_1p352"; + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_s5c_2p04: smps5 { + regulator-name = "vreg_s5c_2p04"; + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2000000>; + }; + + vreg_s6c_1p128: smps6 { + regulator-name = "vreg_s6c_1p128"; + regulator-min-microvolt = <1128000>; + regulator-max-microvolt = <1128000>; + }; + + vreg_l1c_1p304: ldo1 { + regulator-name = "vreg_l1c_1p304"; + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = ; + }; + + vreg_l2c_1p808: ldo2 { + regulator-name = "vreg_l2c_1p808"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = ; + }; + + vreg_l5c_1p2: ldo5 { + regulator-name = "vreg_l5c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = + ; + }; + + vreg_l7c_1p8: ldo7 { + regulator-name = "vreg_l7c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l8c_1p2: ldo8 { + regulator-name = "vreg_l8c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = + ; + }; + + vreg_l10c_3p3: ldo10 { + regulator-name = "vreg_l10c_3p3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + }; + + vreg_l11c_0p8: ldo11 { + regulator-name = "vreg_l11c_0p8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = ; + }; + + vreg_l12c_1p808: ldo12 { + regulator-name = "vreg_l12c_1p808"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = ; + }; + + vreg_l13c_2p96: ldo13 { + regulator-name = "vreg_l13c_2p96"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l15c_1p9: ldo15 { + regulator-name = "vreg_l15c_1p9"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = ; + }; + + vreg_l16c_3p008: ldo16 { + regulator-name = "vreg_l16c_3p008"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l18c_0p88: ldo18 { + regulator-name = "vreg_l18c_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + }; + }; +}; + +ðernet { + status = "okay"; + + snps,reset-gpio = <&tlmm 79 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 11000 70000>; + + snps,mtl-rx-config = <&mtl_rx_setup>; + snps,mtl-tx-config = <&mtl_tx_setup>; + + pinctrl-names = "default"; + pinctrl-0 = <ðernet_defaults>; + + phy-handle = <&rgmii_phy>; + phy-mode = "rgmii"; + max-speed = <1000>; + + mdio { + #address-cells = <0x1>; + #size-cells = <0x0>; + + compatible = "snps,dwmac-mdio"; + + /* Micrel KSZ9031RNZ PHY */ + rgmii_phy: phy@7 { + reg = <0x7>; + + interrupt-parent = <&tlmm>; + interrupts-extended = <&tlmm 124 IRQ_TYPE_EDGE_FALLING>; /* phy intr */ + device_type = "ethernet-phy"; + compatible = "ethernet-phy-ieee802.3-c22"; + }; + }; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&remoteproc_adsp { + status = "okay"; + firmware-name = "qcom/sa8155p/adsp.mdt"; +}; + +&remoteproc_cdsp { + status = "okay"; + firmware-name = "qcom/sa8155p/cdsp.mdt"; +}; + +&sdhc_2 { + status = "okay"; + + cd-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; + vqmmc-supply = <&vreg_l13c_2p96>; /* IO line power */ + vmmc-supply = <&vreg_l17a_2p96>; /* Card power line */ + bus-width = <4>; + no-sdio; + no-emmc; +}; + +&uart2 { + status = "okay"; +}; + +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l10a_2p96>; + vcc-max-microamp = <750000>; + vccq-supply = <&vreg_l5c_1p2>; + vccq-max-microamp = <700000>; + vccq2-supply = <&vreg_s4a_1p8>; + vccq2-max-microamp = <750000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l8c_1p2>; + vdda-pll-supply = <&vreg_l5a_0p88>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "host"; + + pinctrl-names = "default"; + pinctrl-0 = <&usb2phy_ac_en1_default>; +}; + +&usb_1_hsphy { + status = "okay"; + vdda-pll-supply = <&vdd_usb_hs_core>; + vdda33-supply = <&vdda_usb_hs_3p1>; + vdda18-supply = <&vdda_usb_hs_1p8>; +}; + +&usb_1_qmpphy { + status = "disabled"; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; + + pinctrl-names = "default"; + pinctrl-0 = <&usb2phy_ac_en2_default>; +}; + +&usb_2_hsphy { + status = "okay"; + vdda-pll-supply = <&vdd_usb_hs_core>; + vdda33-supply = <&vdda_usb_hs_3p1>; + vdda18-supply = <&vdda_usb_hs_1p8>; +}; + +&usb_2_qmpphy { + status = "okay"; + vdda-phy-supply = <&vreg_l8c_1p2>; + vdda-pll-supply = <&vdda_usb_ss_dp_core_1>; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie0_phy { + status = "okay"; + vdda-phy-supply = <&vreg_l18c_0p88>; + vdda-pll-supply = <&vreg_l8c_1p2>; +}; + +&pcie1_phy { + vdda-phy-supply = <&vreg_l18c_0p88>; + vdda-pll-supply = <&vreg_l8c_1p2>; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>; + + sdc2_on: sdc2_on { + clk { + pins = "sdc2_clk"; + bias-disable; /* No pull */ + drive-strength = <16>; /* 16 MA */ + }; + + cmd { + pins = "sdc2_cmd"; + bias-pull-up; /* pull up */ + drive-strength = <16>; /* 16 MA */ + }; + + data { + pins = "sdc2_data"; + bias-pull-up; /* pull up */ + drive-strength = <16>; /* 16 MA */ + }; + + sd-cd { + pins = "gpio96"; + function = "gpio"; + bias-pull-up; /* pull up */ + drive-strength = <2>; /* 2 MA */ + }; + }; + + sdc2_off: sdc2_off { + clk { + pins = "sdc2_clk"; + bias-disable; /* No pull */ + drive-strength = <2>; /* 2 MA */ + }; + + cmd { + pins = "sdc2_cmd"; + bias-pull-up; /* pull up */ + drive-strength = <2>; /* 2 MA */ + }; + + data { + pins = "sdc2_data"; + bias-pull-up; /* pull up */ + drive-strength = <2>; /* 2 MA */ + }; + + sd-cd { + pins = "gpio96"; + function = "gpio"; + bias-pull-up; /* pull up */ + drive-strength = <2>; /* 2 MA */ + }; + }; + + usb2phy_ac_en1_default: usb2phy_ac_en1_default { + mux { + pins = "gpio113"; + function = "usb2phy_ac"; + bias-disable; + drive-strength = <2>; + }; + }; + + usb2phy_ac_en2_default: usb2phy_ac_en2_default { + mux { + pins = "gpio123"; + function = "usb2phy_ac"; + bias-disable; + drive-strength = <2>; + }; + }; + + ethernet_defaults: ethernet-defaults { + mdc { + pins = "gpio7"; + function = "rgmii"; + bias-pull-up; + }; + + mdio { + pins = "gpio59"; + function = "rgmii"; + bias-pull-up; + }; + + rgmii-rx { + pins = "gpio117", "gpio118", "gpio119", "gpio120", "gpio115", "gpio116"; + function = "rgmii"; + bias-disable; + drive-strength = <2>; + }; + + rgmii-tx { + pins = "gpio122", "gpio4", "gpio5", "gpio6", "gpio114", "gpio121"; + function = "rgmii"; + bias-pull-up; + drive-strength = <16>; + }; + + phy-intr { + pins = "gpio124"; + function = "emac_phy"; + bias-disable; + drive-strength = <8>; + }; + + pps { + pins = "gpio81"; + function = "emac_pps"; + bias-disable; + drive-strength = <8>; + }; + + phy-reset { + pins = "gpio79"; + function = "gpio"; + bias-pull-up; + drive-strength = <16>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts new file mode 100644 index 000000000..2c62ba6a4 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts @@ -0,0 +1,394 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + * Copyright (c) 2022, Linaro Limited + */ + +/dts-v1/; + +#include +#include +#include + +#include "sa8540p.dtsi" + +/ { + model = "Qualcomm SA8295P ADP"; + compatible = "qcom,sa8295p-adp", "qcom,sa8540p"; + + aliases { + serial0 = &qup2_uart17; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&apps_rsc { + pmm8540-a-regulators { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vreg_l3a: ldo3 { + regulator-name = "vreg_l3a"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1208000>; + regulator-initial-mode = ; + }; + + vreg_l5a: ldo5 { + regulator-name = "vreg_l5a"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + }; + + vreg_l7a: ldo7 { + regulator-name = "vreg_l7a"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l13a: ldo13 { + regulator-name = "vreg_l13a"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + }; + }; + + pmm8540-c-regulators { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_l1c: ldo1 { + regulator-name = "vreg_l1c"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + }; + + vreg_l2c: ldo2 { + regulator-name = "vreg_l2c"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + }; + + vreg_l3c: ldo3 { + regulator-name = "vreg_l3c"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = + ; + }; + + vreg_l4c: ldo4 { + regulator-name = "vreg_l4c"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1208000>; + regulator-initial-mode = ; + }; + + vreg_l6c: ldo6 { + regulator-name = "vreg_l6c"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = + ; + }; + + vreg_l7c: ldo7 { + regulator-name = "vreg_l7c"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l10c: ldo10 { + regulator-name = "vreg_l10c"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = + ; + }; + + vreg_l17c: ldo17 { + regulator-name = "vreg_l17c"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = + ; + }; + }; + + pmm8540-g-regulators { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "g"; + + vreg_l3g: ldo3 { + regulator-name = "vreg_l3g"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l7g: ldo7 { + regulator-name = "vreg_l7g"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l8g: ldo8 { + regulator-name = "vreg_l8g"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + }; + }; +}; + +&qup2 { + status = "okay"; +}; + +&qup2_uart17 { + compatible = "qcom,geni-debug-uart"; + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/sa8540p/adsp.mbn"; + status = "okay"; +}; + +&remoteproc_nsp0 { + firmware-name = "qcom/sa8540p/cdsp.mbn"; + status = "okay"; +}; + +&remoteproc_nsp1 { + firmware-name = "qcom/sa8540p/cdsp1.mbn"; + status = "okay"; +}; + +&spmi_bus { + pm8450a: pmic@0 { + compatible = "qcom,pm8150", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8450a_gpios: gpio@c000 { + compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pm8450a_gpios 0 0 10>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pm8450c: pmic@4 { + compatible = "qcom,pm8150", "qcom,spmi-pmic"; + reg = <0x4 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8450c_gpios: gpio@c000 { + compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pm8450c_gpios 0 0 10>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pm8450e: pmic@8 { + compatible = "qcom,pm8150", "qcom,spmi-pmic"; + reg = <0x8 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8450e_gpios: gpio@c000 { + compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pm8450e_gpios 0 0 10>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pm8450g: pmic@c { + compatible = "qcom,pm8150", "qcom,spmi-pmic"; + reg = <0xc SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8450g_gpios: gpio@c000 { + compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pm8450g_gpios 0 0 10>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l17c>; + vcc-max-microamp = <800000>; + vccq-supply = <&vreg_l6c>; + vccq-max-microamp = <900000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l8g>; + vdda-pll-supply = <&vreg_l3g>; + + status = "okay"; +}; + +&ufs_card_hc { + reset-gpios = <&tlmm 229 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l10c>; + vcc-max-microamp = <800000>; + vccq-supply = <&vreg_l3c>; + vccq-max-microamp = <900000>; + + status = "okay"; +}; + +&ufs_card_phy { + vdda-phy-supply = <&vreg_l8g>; + vdda-pll-supply = <&vreg_l3g>; + + status = "okay"; +}; + +&usb_0 { + status = "okay"; +}; + +&usb_0_dwc3 { + /* TODO: Define USB-C connector properly */ + dr_mode = "peripheral"; +}; + +&usb_0_hsphy { + vdda-pll-supply = <&vreg_l5a>; + vdda18-supply = <&vreg_l7a>; + vdda33-supply = <&vreg_l13a>; + + status = "okay"; +}; + +&usb_0_qmpphy { + vdda-phy-supply = <&vreg_l3a>; + vdda-pll-supply = <&vreg_l5a>; + + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + /* TODO: Define USB-C connector properly */ + dr_mode = "host"; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&vreg_l1c>; + vdda18-supply = <&vreg_l7c>; + vdda33-supply = <&vreg_l2c>; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vreg_l4c>; + vdda-pll-supply = <&vreg_l1c>; + + status = "okay"; +}; + +&usb_2_hsphy0 { + vdda-pll-supply = <&vreg_l5a>; + vdda18-supply = <&vreg_l7g>; + vdda33-supply = <&vreg_l13a>; + + status = "okay"; +}; + +&usb_2_hsphy1 { + vdda-pll-supply = <&vreg_l5a>; + vdda18-supply = <&vreg_l7g>; + vdda33-supply = <&vreg_l13a>; + + status = "okay"; +}; + +&usb_2_hsphy2 { + vdda-pll-supply = <&vreg_l5a>; + vdda18-supply = <&vreg_l7g>; + vdda33-supply = <&vreg_l13a>; + + status = "okay"; +}; + +&usb_2_hsphy3 { + vdda-pll-supply = <&vreg_l5a>; + vdda18-supply = <&vreg_l7g>; + vdda33-supply = <&vreg_l13a>; + + status = "okay"; +}; + +&usb_2_qmpphy0 { + vdda-phy-supply = <&vreg_l3a>; + vdda-pll-supply = <&vreg_l5a>; + + status = "okay"; +}; + +&usb_2_qmpphy1 { + vdda-phy-supply = <&vreg_l3a>; + vdda-pll-supply = <&vreg_l5a>; + + status = "okay"; +}; + +&xo_board_clk { + clock-frequency = <38400000>; +}; + +/* PINCTRL */ diff --git a/arch/arm64/boot/dts/qcom/sa8540p.dtsi b/arch/arm64/boot/dts/qcom/sa8540p.dtsi new file mode 100644 index 000000000..8ea2886fb --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sa8540p.dtsi @@ -0,0 +1,133 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + * Copyright (c) 2022, Linaro Limited + */ + +#include "sc8280xp.dtsi" + +/delete-node/ &cpu0_opp_table; +/delete-node/ &cpu4_opp_table; + +/ { + cpu0_opp_table: cpu0-opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-403200000 { + opp-hz = /bits/ 64 <403200000>; + }; + opp-499200000 { + opp-hz = /bits/ 64 <499200000>; + }; + opp-595200000 { + opp-hz = /bits/ 64 <595200000>; + }; + opp-710400000 { + opp-hz = /bits/ 64 <710400000>; + }; + opp-806400000 { + opp-hz = /bits/ 64 <806400000>; + }; + opp-902400000 { + opp-hz = /bits/ 64 <902400000>; + }; + opp-1017600000 { + opp-hz = /bits/ 64 <1017600000>; + }; + opp-1113600000 { + opp-hz = /bits/ 64 <1113600000>; + }; + opp-1209600000 { + opp-hz = /bits/ 64 <1209600000>; + }; + opp-1324800000 { + opp-hz = /bits/ 64 <1324800000>; + }; + opp-1440000000 { + opp-hz = /bits/ 64 <1440000000>; + }; + opp-1555200000 { + opp-hz = /bits/ 64 <1555200000>; + }; + opp-1670400000 { + opp-hz = /bits/ 64 <1670400000>; + }; + opp-1785600000 { + opp-hz = /bits/ 64 <1785600000>; + }; + opp-1881600000 { + opp-hz = /bits/ 64 <1881600000>; + }; + opp-2016000000 { + opp-hz = /bits/ 64 <2016000000>; + }; + opp-2131200000 { + opp-hz = /bits/ 64 <2131200000>; + }; + opp-2246400000 { + opp-hz = /bits/ 64 <2246400000>; + }; + }; + + cpu4_opp_table: cpu4-opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-825600000 { + opp-hz = /bits/ 64 <825600000>; + }; + opp-940800000 { + opp-hz = /bits/ 64 <940800000>; + }; + opp-1056000000 { + opp-hz = /bits/ 64 <1056000000>; + }; + opp-1171200000 { + opp-hz = /bits/ 64 <1171200000>; + }; + opp-1286400000 { + opp-hz = /bits/ 64 <1286400000>; + }; + opp-1401600000 { + opp-hz = /bits/ 64 <1401600000>; + }; + opp-1516800000 { + opp-hz = /bits/ 64 <1516800000>; + }; + opp-1632000000 { + opp-hz = /bits/ 64 <1632000000>; + }; + opp-1747200000 { + opp-hz = /bits/ 64 <1747200000>; + }; + opp-1862400000 { + opp-hz = /bits/ 64 <1862400000>; + }; + opp-1977600000 { + opp-hz = /bits/ 64 <1977600000>; + }; + opp-2073600000 { + opp-hz = /bits/ 64 <2073600000>; + }; + opp-2169600000 { + opp-hz = /bits/ 64 <2169600000>; + }; + opp-2284800000 { + opp-hz = /bits/ 64 <2284800000>; + }; + opp-2380800000 { + opp-hz = /bits/ 64 <2380800000>; + }; + opp-2496000000 { + opp-hz = /bits/ 64 <2496000000>; + }; + opp-2592000000 { + opp-hz = /bits/ 64 <2592000000>; + }; + }; +}; + +&rpmhpd { + compatible = "qcom,sa8540p-rpmhpd"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts new file mode 100644 index 000000000..9dee131b1 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts @@ -0,0 +1,769 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * SC7180 IDP board device tree source + * + * Copyright (c) 2019, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include +#include +#include +#include "sc7180.dtsi" +#include "pm6150.dtsi" +#include "pm6150l.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SC7180 IDP"; + compatible = "qcom,sc7180-idp", "qcom,sc7180"; + + aliases { + bluetooth0 = &bluetooth; + hsuart0 = &uart3; + serial0 = &uart8; + wifi0 = &wifi; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +/* + * Reserved memory changes + * + * Delete all unused memory nodes and define the peripheral memory regions + * required by the board dts. + * + */ + +/delete-node/ &hyp_mem; +/delete-node/ &xbl_mem; +/delete-node/ &aop_mem; +/delete-node/ &sec_apps_mem; +/delete-node/ &tz_mem; + +/* Increase the size from 2MB to 8MB */ +&rmtfs_mem { + reg = <0x0 0x94600000 0x0 0x800000>; +}; + +/ { + reserved-memory { + atf_mem: memory@80b00000 { + reg = <0x0 0x80b00000 0x0 0x100000>; + no-map; + }; + + mpss_mem: memory@86000000 { + reg = <0x0 0x86000000 0x0 0x8c00000>; + no-map; + }; + + camera_mem: memory@8ec00000 { + reg = <0x0 0x8ec00000 0x0 0x500000>; + no-map; + }; + + venus_mem: memory@8f600000 { + reg = <0 0x8f600000 0 0x500000>; + no-map; + }; + + wlan_mem: memory@94100000 { + reg = <0x0 0x94100000 0x0 0x200000>; + no-map; + }; + + mba_mem: memory@94400000 { + reg = <0x0 0x94400000 0x0 0x200000>; + no-map; + }; + }; +}; + +&apps_rsc { + pm6150-rpmh-regulators { + compatible = "qcom,pm6150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vreg_s1a_1p1: smps1 { + regulator-min-microvolt = <1128000>; + regulator-max-microvolt = <1128000>; + }; + + vreg_s4a_1p0: smps4 { + regulator-min-microvolt = <824000>; + regulator-max-microvolt = <1120000>; + }; + + vreg_s5a_2p0: smps5 { + regulator-min-microvolt = <1744000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_l1a_1p2: ldo1 { + regulator-min-microvolt = <1178000>; + regulator-max-microvolt = <1256000>; + regulator-initial-mode = ; + }; + + vreg_l2a_1p0: ldo2 { + regulator-min-microvolt = <944000>; + regulator-max-microvolt = <1056000>; + regulator-initial-mode = ; + }; + + vreg_l3a_1p0: ldo3 { + regulator-min-microvolt = <968000>; + regulator-max-microvolt = <1064000>; + regulator-initial-mode = ; + }; + + vreg_l4a_0p8: ldo4 { + regulator-min-microvolt = <824000>; + regulator-max-microvolt = <928000>; + regulator-initial-mode = ; + }; + + vreg_l5a_2p7: ldo5 { + regulator-min-microvolt = <2496000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = ; + }; + + vreg_l6a_0p6: ldo6 { + regulator-min-microvolt = <568000>; + regulator-max-microvolt = <648000>; + regulator-initial-mode = ; + }; + + vreg_l9a_0p6: ldo9 { + regulator-min-microvolt = <488000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = ; + }; + + vreg_l10a_1p8: ldo10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1832000>; + regulator-initial-mode = ; + }; + + vreg_l11a_1p8: ldo11 { + regulator-min-microvolt = <1696000>; + regulator-max-microvolt = <1904000>; + regulator-initial-mode = ; + }; + + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l13a_1p8: ldo13 { + regulator-min-microvolt = <1696000>; + regulator-max-microvolt = <1904000>; + regulator-initial-mode = ; + }; + + vreg_l14a_1p8: ldo14 { + regulator-min-microvolt = <1728000>; + regulator-max-microvolt = <1832000>; + regulator-initial-mode = ; + }; + + vreg_l15a_1p8: ldo15 { + regulator-min-microvolt = <1696000>; + regulator-max-microvolt = <1904000>; + regulator-initial-mode = ; + }; + + vreg_l16a_2p7: ldo16 { + regulator-min-microvolt = <2496000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = ; + }; + + vreg_l17a_3p0: ldo17 { + regulator-min-microvolt = <2920000>; + regulator-max-microvolt = <3232000>; + regulator-initial-mode = ; + }; + + vreg_l18a_2p8: ldo18 { + regulator-min-microvolt = <2496000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = ; + }; + + vreg_l19a_2p9: ldo19 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + }; + + pm6150l-rpmh-regulators { + compatible = "qcom,pm6150l-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_s8c_1p3: smps8 { + regulator-min-microvolt = <1120000>; + regulator-max-microvolt = <1408000>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-min-microvolt = <1616000>; + regulator-max-microvolt = <1984000>; + regulator-initial-mode = ; + }; + + vreg_l2c_1p3: ldo2 { + regulator-min-microvolt = <1168000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = ; + }; + + vreg_l3c_1p2: ldo3 { + regulator-min-microvolt = <1144000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = ; + }; + + vreg_l4c_1p8: ldo4 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = ; + }; + + vreg_l5c_1p8: ldo5 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = ; + }; + + vreg_l6c_2p9: ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-initial-mode = ; + }; + + vreg_l7c_3p0: ldo7 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + }; + + vreg_l8c_1p8: ldo8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1904000>; + regulator-initial-mode = ; + }; + + vreg_l9c_2p9: ldo9 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l10c_3p3: ldo10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3400000>; + regulator-initial-mode = ; + }; + + vreg_l11c_3p3: ldo11 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3400000>; + regulator-initial-mode = ; + }; + + vreg_bob: bob { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = ; + }; + }; +}; + +&dsi0 { + status = "okay"; + + vdda-supply = <&vreg_l3c_1p2>; + + panel@0 { + compatible = "visionox,rm69299-1080p-display"; + reg = <0>; + + vdda-supply = <&vreg_l8c_1p8>; + vdd3p3-supply = <&vreg_l18a_2p8>; + + pinctrl-names = "default"; + pinctrl-0 = <&disp_pins>; + + reset-gpios = <&pm6150l_gpio 3 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + panel0_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; + + ports { + port@1 { + endpoint { + remote-endpoint = <&panel0_in>; + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&dsi_phy { + status = "okay"; + vdds-supply = <&vreg_l4a_0p8>; +}; + +&mdp { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&qfprom { + vcc-supply = <&vreg_l11a_1p8>; +}; + +&qspi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&qspi_clk &qspi_cs0 &qspi_data01>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + spi-tx-bus-width = <2>; + spi-rx-bus-width = <2>; + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&remoteproc_mpss { + status = "okay"; + compatible = "qcom,sc7180-mss-pil"; + iommus = <&apps_smmu 0x461 0x0>, <&apps_smmu 0x444 0x3>; + memory-region = <&mba_mem &mpss_mem>; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; + vmmc-supply = <&vreg_l19a_2p9>; + vqmmc-supply = <&vreg_l12a_1p8>; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default","sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; + vmmc-supply = <&vreg_l9c_2p9>; + vqmmc-supply = <&vreg_l6c_2p9>; + + cd-gpios = <&tlmm 69 GPIO_ACTIVE_LOW>; +}; + +&uart3 { + status = "okay"; + + /delete-property/interrupts; + interrupts-extended = <&intc GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>, + <&tlmm 41 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default", "sleep"; + pinctrl-1 = <&qup_uart3_sleep>; + + bluetooth: wcn3990-bt { + compatible = "qcom,wcn3990-bt"; + vddio-supply = <&vreg_l10a_1p8>; + vddxo-supply = <&vreg_l1c_1p8>; + vddrf-supply = <&vreg_l2c_1p3>; + vddch0-supply = <&vreg_l10c_3p3>; + max-speed = <3200000>; + }; +}; + +&uart8 { + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_hsphy { + status = "okay"; + vdd-supply = <&vreg_l4a_0p8>; + vdda-pll-supply = <&vreg_l11a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l17a_3p0>; + qcom,imp-res-offset-value = <8>; + qcom,preemphasis-level = ; + qcom,preemphasis-width = ; + qcom,bias-ctrl-value = <0x22>; + qcom,charge-ctrl-value = <3>; + qcom,hsdisc-trim-value = <0>; +}; + +&usb_1_qmpphy { + status = "okay"; + vdda-phy-supply = <&vreg_l3c_1p2>; + vdda-pll-supply = <&vreg_l4a_0p8>; +}; + +&venus { + video-firmware { + iommus = <&apps_smmu 0x0c42 0x0>; + }; +}; + +&wifi { + status = "okay"; + vdd-0.8-cx-mx-supply = <&vreg_l9a_0p6>; + vdd-1.8-xo-supply = <&vreg_l1c_1p8>; + vdd-1.3-rfa-supply = <&vreg_l2c_1p3>; + vdd-3.3-ch0-supply = <&vreg_l10c_3p3>; + vdd-3.3-ch1-supply = <&vreg_l11c_3p3>; + wifi-firmware { + iommus = <&apps_smmu 0xc2 0x1>; + }; +}; + +/* PINCTRL - additions to nodes defined in sc7180.dtsi */ + +&pm6150l_gpio { + disp_pins: disp-state { + pinconf { + pins = "gpio3"; + function = PMIC_GPIO_FUNC_FUNC1; + qcom,drive-strength = ; + power-source = <0>; + bias-disable; + output-low; + }; + }; +}; + +&qspi_clk { + pinconf { + pins = "gpio63"; + bias-disable; + }; +}; + +&qspi_cs0 { + pinconf { + pins = "gpio68"; + bias-disable; + }; +}; + +&qspi_data01 { + pinconf { + pins = "gpio64", "gpio65"; + + /* High-Z when no transfers; nice to park the lines */ + bias-pull-up; + }; +}; + +&qup_i2c2_default { + pinconf { + pins = "gpio15", "gpio16"; + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; + }; +}; + +&qup_i2c4_default { + pinconf { + pins = "gpio115", "gpio116"; + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; + }; +}; + +&qup_i2c7_default { + pinconf { + pins = "gpio6", "gpio7"; + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; + }; +}; + +&qup_i2c9_default { + pinconf { + pins = "gpio46", "gpio47"; + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; + }; +}; + +&qup_uart3_default { + pinconf-cts { + /* + * Configure a pull-down on CTS to match the pull of + * the Bluetooth module. + */ + pins = "gpio38"; + bias-pull-down; + }; + + pinconf-rts { + /* We'll drive RTS, so no pull */ + pins = "gpio39"; + drive-strength = <2>; + bias-disable; + }; + + pinconf-tx { + /* We'll drive TX, so no pull */ + pins = "gpio40"; + drive-strength = <2>; + bias-disable; + }; + + pinconf-rx { + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module is + * in tri-state (module powered off or not driving the + * signal yet). + */ + pins = "gpio41"; + bias-pull-up; + }; +}; + +&qup_uart8_default { + pinconf-tx { + pins = "gpio44"; + drive-strength = <2>; + bias-disable; + }; + + pinconf-rx { + pins = "gpio45"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +&qup_spi0_default { + pinconf { + pins = "gpio34", "gpio35", "gpio36", "gpio37"; + drive-strength = <2>; + bias-disable; + }; +}; + +&qup_spi6_default { + pinconf { + pins = "gpio59", "gpio60", "gpio61", "gpio62"; + drive-strength = <2>; + bias-disable; + }; +}; + +&qup_spi10_default { + pinconf { + pins = "gpio86", "gpio87", "gpio88", "gpio89"; + drive-strength = <2>; + bias-disable; + }; +}; + +&tlmm { + qup_uart3_sleep: qup-uart3-sleep { + pinmux { + pins = "gpio38", "gpio39", + "gpio40", "gpio41"; + function = "gpio"; + }; + + pinconf-cts { + /* + * Configure a pull-down on CTS to match the pull of + * the Bluetooth module. + */ + pins = "gpio38"; + bias-pull-down; + }; + + pinconf-rts { + /* + * Configure pull-down on RTS. As RTS is active low + * signal, pull it low to indicate the BT SoC that it + * can wakeup the system anytime from suspend state by + * pulling RX low (by sending wakeup bytes). + */ + pins = "gpio39"; + bias-pull-down; + }; + + pinconf-tx { + /* + * Configure pull-up on TX when it isn't actively driven + * to prevent BT SoC from receiving garbage during sleep. + */ + pins = "gpio40"; + bias-pull-up; + }; + + pinconf-rx { + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module + * is floating which may cause spurious wakeups. + */ + pins = "gpio41"; + bias-pull-up; + }; + }; + + sdc1_on: sdc1-on { + pinconf-clk { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <16>; + }; + + pinconf-cmd { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + pinconf-data { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <10>; + }; + + pinconf-rclk { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc1_off: sdc1-off { + pinconf-clk { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; + + pinconf-cmd { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + pinconf-data { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + + pinconf-rclk { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc2_on: sdc2-on { + pinconf-clk { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + + pinconf-cmd { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + pinconf-data { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + + pinconf-sd-cd { + pins = "gpio69"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + sdc2_off: sdc2-off { + pinconf-clk { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + + pinconf-cmd { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + pinconf-data { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + + pinconf-sd-cd { + pins = "gpio69"; + bias-pull-up; + drive-strength = <2>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-lite.dtsi b/arch/arm64/boot/dts/qcom/sc7180-lite.dtsi new file mode 100644 index 000000000..4b306a59d --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-lite.dtsi @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * SC7180 lite device tree source + * + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +&cpu6_opp10 { + opp-peak-kBps = <7216000 22425600>; +}; + +&cpu6_opp11 { + opp-peak-kBps = <7216000 22425600>; +}; + +&cpu6_opp12 { + opp-peak-kBps = <8532000 23347200>; +}; + +&cpu6_opp13 { + opp-peak-kBps = <8532000 23347200>; +}; + +&cpu6_opp14 { + opp-peak-kBps = <8532000 23347200>; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1-lte.dts new file mode 100644 index 000000000..82dc00cc7 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1-lte.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google CoachZ board device tree source + * + * Copyright 2020 Google LLC. + */ + +#include "sc7180-trogdor-coachz-r1.dts" +#include "sc7180-trogdor-lte-sku.dtsi" + +/ { + model = "Google CoachZ (rev1 - 2) with LTE"; + compatible = "google,coachz-rev1-sku0", "google,coachz-rev2-sku0", "qcom,sc7180"; +}; + +&cros_ec_proximity { + label = "proximity-wifi-lte"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts new file mode 100644 index 000000000..edfcd47e1 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts @@ -0,0 +1,171 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google CoachZ board device tree source + * + * Copyright 2020 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor-coachz.dtsi" + +/ { + model = "Google CoachZ (rev1 - 2)"; + compatible = "google,coachz-rev1", "google,coachz-rev2", "qcom,sc7180"; +}; + +/* + * CoachZ rev1 is stuffed with a 47k NTC as charger thermistor which currently + * is not supported by the PM6150 ADC driver. Disable the charger thermal zone + * to avoid using bogus temperature values. + */ +&charger_thermal { + status = "disabled"; +}; + +&pm6150_adc { + /delete-node/ skin-temp-thermistor@4e; + /delete-node/ charger-thermistor@4f; +}; + +&pm6150_adc_tm { + status = "disabled"; + + /delete-node/ charger-thermistor@0; + /delete-node/ skin-temp-thermistor@1; +}; + +/* + * CoachZ rev1 is stuffed with a 47k NTC as thermistor for skin temperature, + * which currently is not supported by the PM6150 ADC driver. Disable the + * skin temperature thermal zone to avoid using bogus temperature values. + */ +&skin_temp_thermal { + status = "disabled"; +}; + +&tlmm { + gpio-line-names = "HUB_RST_L", + "AP_RAM_ID0", + "AP_SKU_ID2", + "AP_RAM_ID1", + "FP_TO_AP_IRQ_L", + "AP_RAM_ID2", + "UF_CAM_EN", + "WF_CAM_EN", + "TS_RESET_L", + "TS_INT_L", + "FPMCU_BOOT0", + "EDP_BRIJ_IRQ", + "AP_EDP_BKLTEN", + "UF_CAM_MCLK", + "WF_CAM_CLK", + "EDP_BRIJ_I2C_SDA", + "EDP_BRIJ_I2C_SCL", + "UF_CAM_SDA", + "UF_CAM_SCL", + "WF_CAM_SDA", + "WF_CAM_SCL", + "WLC_IRQ", + "FP_RST_L", + "AMP_EN", + "WLC_NRST", + "AP_SAR_SENSOR_SDA", + "AP_SAR_SENSOR_SCL", + "", + "", + "WF_CAM_RST_L", + "UF_CAM_RST_L", + "AP_BRD_ID2", + "BRIJ_SUSPEND", + "AP_BRD_ID0", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + "AP_H1_SPI_CLK", + "AP_H1_SPI_CS_L", + "", + "", + "", + "", + "H1_AP_INT_ODL", + "", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "", + "", + "FORCED_USB_BOOT", + "AMP_BCLK", + "AMP_LRCLK", + "AMP_DIN", + "EN_PP3300_DX_EDP", + "HP_BCLK", + "HP_LRCLK", + "HP_DOUT", + "HP_DIN", + "HP_MCLK", + "AP_SKU_ID0", + "AP_EC_SPI_MISO", + "AP_EC_SPI_MOSI", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "AP_SPI_CLK", + "AP_SPI_MOSI", + "AP_SPI_MISO", + /* + * AP_FLASH_WP_L is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_L. + */ + "AP_FLASH_WP_L", + "", + "AP_SPI_CS0_L", + "SD_CD_ODL", + "", + "", + "", + "", + "FPMCU_SEL", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RST", + "UIM2_PRESENT_L", + "UIM1_DATA", + "UIM1_CLK", + "UIM1_RST", + "", + "DMIC_CLK_EN", + "HUB_EN", + "", + "AP_SPI_FP_MISO", + "AP_SPI_FP_MOSI", + "AP_SPI_FP_CLK", + "AP_SPI_FP_CS_L", + "AP_SKU_ID1", + "AP_RST_REQ", + "", + "AP_BRD_ID1", + "AP_EC_INT_L", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "EDP_BRIJ_EN", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "AP_TS_PEN_I2C_SDA", + "AP_TS_PEN_I2C_SCL", + "DP_HOT_PLUG_DET", + "EC_IN_RW_ODL"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3-lte.dts new file mode 100644 index 000000000..d23409034 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3-lte.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google CoachZ board device tree source + * + * Copyright 2021 Google LLC. + */ + +#include "sc7180-trogdor-coachz-r3.dts" +#include "sc7180-trogdor-lte-sku.dtsi" + +/ { + model = "Google CoachZ (rev3+) with LTE"; + compatible = "google,coachz-sku0", "qcom,sc7180"; +}; + +&cros_ec_proximity { + label = "proximity-wifi-lte"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3.dts new file mode 100644 index 000000000..a02d2d57c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google CoachZ board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor-coachz.dtsi" + +/ { + model = "Google CoachZ (rev3+)"; + compatible = "google,coachz", "qcom,sc7180"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi new file mode 100644 index 000000000..7ee407f7b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi @@ -0,0 +1,342 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google CoachZ board device tree source + * + * Copyright 2020 Google LLC. + */ + +#include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-ti-sn65dsi86.dtsi" + +/* Deleted nodes from sc7180-trogdor.dtsi */ + +/delete-node/ &alc5682; +/delete-node/ &pp3300_codec; + +/ { + /* BOARD-SPECIFIC TOP LEVEL NODES */ + + adau7002: audio-codec-1 { + compatible = "adi,adau7002"; + IOVDD-supply = <&pp1800_l15a>; + wakeup-delay-ms = <80>; + #sound-dai-cells = <0>; + }; + + thermal-zones { + skin_temp_thermal: skin-temp-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&pm6150_adc_tm 1>; + sustainable-power = <965>; + + trips { + skin_temp_alert0: trip-point0 { + temperature = <42000>; + hysteresis = <1000>; + type = "passive"; + }; + + skin_temp_alert1: trip-point1 { + temperature = <45000>; + hysteresis = <1000>; + type = "passive"; + }; + + skin-temp-crit { + temperature = <60000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&skin_temp_alert0>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + + map1 { + trip = <&skin_temp_alert1>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; +}; + +&ap_spi_fp { + status = "okay"; +}; + +&backlight { + pwms = <&cros_ec_pwm 0>; +}; + +&camcc { + status = "okay"; +}; + +&cros_ec { + keyboard-controller { + compatible = "google,cros-ec-keyb-switches"; + }; + + cros_ec_proximity: proximity { + compatible = "google,cros-ec-mkbp-proximity"; + label = "proximity-wifi"; + }; +}; + +ap_ts_pen_1v8: &i2c4 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@5d { + compatible = "goodix,gt7375p"; + reg = <0x5d>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; + + vdd-supply = <&pp3300_ts>; + }; +}; + +&i2c9 { + status = "disabled"; +}; + +&panel { + compatible = "boe,nv110wtm-n61"; +}; + +&pm6150_adc { + skin-temp-thermistor@4e { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&pm6150_adc_tm { + status = "okay"; + + skin-temp-thermistor@1 { + reg = <1>; + io-channels = <&pm6150_adc ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pp1800_uf_cam { + status = "okay"; +}; + +&pp1800_wf_cam { + status = "okay"; +}; + +&pp2800_uf_cam { + status = "okay"; +}; + +&pp2800_wf_cam { + status = "okay"; +}; + +&pp3300_dx_edp { + gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>; +}; + +&sdhc_2 { + status = "okay"; +}; + +&sn65dsi86_out { + data-lanes = <0 1 2 3>; +}; + +&sound { + compatible = "google,sc7180-coachz"; + model = "sc7180-adau7002-max98357a"; + audio-routing = "PDM_DAT", "DMIC"; + + pinctrl-names = "default"; + pinctrl-0 = <&dmic_clk_en>; +}; + +&sound_multimedia0_codec { + sound-dai = <&adau7002>; +}; + +/* PINCTRL - modifications to sc7180-trogdor.dtsi */ + +&en_pp3300_dx_edp { + pinmux { + pins = "gpio67"; + }; + + pinconf { + pins = "gpio67"; + }; +}; + +&ts_reset_l { + pinconf { + /* + * We want reset state by default and it will be up to the + * driver to disable this when it's ready. + */ + output-low; + }; +}; + +/* PINCTRL - board-specific pinctrl */ + +&tlmm { + gpio-line-names = "HUB_RST_L", + "AP_RAM_ID0", + "AP_SKU_ID2", + "AP_RAM_ID1", + "FP_TO_AP_IRQ_L", + "AP_RAM_ID2", + "UF_CAM_EN", + "WF_CAM_EN", + "TS_RESET_L", + "TS_INT_L", + "FPMCU_BOOT0", + "EDP_BRIJ_IRQ", + "AP_EDP_BKLTEN", + "UF_CAM_MCLK", + "WF_CAM_CLK", + "EDP_BRIJ_I2C_SDA", + "EDP_BRIJ_I2C_SCL", + "UF_CAM_SDA", + "UF_CAM_SCL", + "WF_CAM_SDA", + "WF_CAM_SCL", + "WLC_IRQ", + "FP_RST_L", + "AMP_EN", + "WLC_NRST", + "AP_SAR_SENSOR_SDA", + "AP_SAR_SENSOR_SCL", + "", + "", + "WF_CAM_RST_L", + "UF_CAM_RST_L", + "AP_BRD_ID2", + "BRIJ_SUSPEND", + "AP_BRD_ID0", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + "AP_H1_SPI_CLK", + "AP_H1_SPI_CS_L", + "", + "", + "", + "", + "H1_AP_INT_ODL", + "", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "", + "", + "FORCED_USB_BOOT", + "AMP_BCLK", + "AMP_LRCLK", + "AMP_DIN", + "", + "HP_BCLK", + "HP_LRCLK", + "HP_DOUT", + "HP_DIN", + "HP_MCLK", + "AP_SKU_ID0", + "AP_EC_SPI_MISO", + "AP_EC_SPI_MOSI", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "AP_SPI_CLK", + "AP_SPI_MOSI", + "AP_SPI_MISO", + /* + * AP_FLASH_WP_L is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_L. + */ + "AP_FLASH_WP_L", + "EN_PP3300_DX_EDP", + "AP_SPI_CS0_L", + "SD_CD_ODL", + "", + "", + "", + "", + "EN_FP_RAILS", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RST", + "UIM2_PRESENT_L", + "UIM1_DATA", + "UIM1_CLK", + "UIM1_RST", + "", + "", + "HUB_EN", + "", + "AP_SPI_FP_MISO", + "AP_SPI_FP_MOSI", + "AP_SPI_FP_CLK", + "AP_SPI_FP_CS_L", + "AP_SKU_ID1", + "AP_RST_REQ", + "", + "AP_BRD_ID1", + "AP_EC_INT_L", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "EDP_BRIJ_EN", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "AP_TS_PEN_I2C_SDA", + "AP_TS_PEN_I2C_SCL", + "DP_HOT_PLUG_DET", + "EC_IN_RW_ODL"; + + dmic_clk_en: dmic_clk_en { + pinmux { + pins = "gpio83"; + function = "gpio"; + }; + + pinconf { + pins = "gpio83"; + drive-strength = <8>; + bias-pull-up; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r2.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r2.dts new file mode 100644 index 000000000..d9e905ed4 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r2.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Homestar board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-ti-sn65dsi86.dtsi" +#include "sc7180-trogdor-homestar.dtsi" + +/ { + model = "Google Homestar (rev2)"; + compatible = "google,homestar-rev2","google,homestar-rev23", "qcom,sc7180"; +}; + +&panel { + /delete-property/hpd-gpios; + no-hpd; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r3.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r3.dts new file mode 100644 index 000000000..242c178fd --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r3.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Homestar board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-ti-sn65dsi86.dtsi" +#include "sc7180-trogdor-homestar.dtsi" + +/ { + model = "Google Homestar (rev3)"; + compatible = "google,homestar-rev3", "qcom,sc7180"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r4.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r4.dts new file mode 100644 index 000000000..66dd87016 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r4.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Homestar board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-parade-ps8640.dtsi" +#include "sc7180-trogdor-homestar.dtsi" + +/ { + model = "Google Homestar (rev4+)"; + compatible = "google,homestar", "qcom,sc7180"; +}; + +&pp3300_brij_ps8640 { + regulator-enable-ramp-delay = <4000>; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi new file mode 100644 index 000000000..bfab67f4a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi @@ -0,0 +1,354 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Homestar board device tree source + * + * Copyright 2021 Google LLC. + */ + +/* This file must be included after sc7180-trogdor.dtsi */ + +/ { + /* BOARD-SPECIFIC TOP LEVEL NODES */ + + max98360a_1: max98360a_1 { + compatible = "maxim,max98360a"; + #sound-dai-cells = <0>; + }; + + max98360a_2: max98360a_2 { + compatible = "maxim,max98360a"; + #sound-dai-cells = <0>; + }; + + max98360a_3: max98360a_3 { + compatible = "maxim,max98360a"; + #sound-dai-cells = <0>; + }; + + pp3300_touch: pp3300-touch { + compatible = "regulator-fixed"; + regulator-name = "pp3300_touch"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&en_pp3300_touch>; + + vin-supply = <&pp3300_a>; + }; + + thermal-zones { + skin_temp_thermal: skin-temp-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&pm6150_adc_tm 1>; + sustainable-power = <965>; + + trips { + skin_temp_alert0: trip-point0 { + temperature = <55000>; + hysteresis = <1000>; + type = "passive"; + }; + + skin_temp_alert1: trip-point1 { + temperature = <58000>; + hysteresis = <1000>; + type = "passive"; + }; + + skin-temp-crit { + temperature = <73000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&skin_temp_alert0>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + + map1 { + trip = <&skin_temp_alert1>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; +}; + +ap_ts_pen_1v8: &i2c4 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@14 { + compatible = "goodix,gt7375p"; + reg = <0x14>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; + + vdd-supply = <&pp3300_touch>; + }; +}; + +/* Panel controls backlight over aux channel */ + +&backlight { + status = "disabled"; +}; + +&camcc { + status = "okay"; +}; + +&cros_ec { + keyboard-controller { + compatible = "google,cros-ec-keyb-switches"; + }; +}; + +&panel { + compatible = "samsung,atna33xc20"; + enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; + /delete-property/ backlight; +}; + +&pm6150_adc { + skin-temp-thermistor@4d { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&pm6150_adc_tm { + status = "okay"; + + skin-temp-thermistor@1 { + reg = <1>; + io-channels = <&pm6150_adc ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pp1800_uf_cam { + status = "okay"; +}; + +&pp1800_wf_cam { + status = "okay"; +}; + +&pp2800_uf_cam { + status = "okay"; +}; + +&pp2800_wf_cam { + status = "okay"; +}; + +&pp3300_dx_edp { + gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>; +}; + +&secondary_mi2s { + qcom,playback-sd-lines = <0 1>; +}; + +&sound_multimedia1_codec { + sound-dai = <&max98360a>, <&max98360a_1>, <&max98360a_2>, <&max98360a_3> ; +}; + +&wifi { + qcom,ath10k-calibration-variant = "GO_HOMESTAR"; +}; + +/* PINCTRL - modifications to sc7180-trogdor.dtsi */ + +&en_pp3300_dx_edp { + pinmux { + pins = "gpio67"; + }; + + pinconf { + pins = "gpio67"; + }; +}; + +&sec_mi2s_active{ + pinmux { + pins = "gpio49", "gpio50", "gpio51", "gpio52"; + function = "mi2s_1"; + }; + + pinconf { + pins = "gpio49", "gpio50", "gpio51", "gpio52"; + drive-strength = <2>; + bias-pull-down; + }; +}; + +&ts_reset_l { + pinconf { + /* + * We want reset state by default and it will be up to the + * driver to disable this when it's ready. + */ + output-low; + }; +}; + +/* PINCTRL - board-specific pinctrl */ + +&tlmm { + gpio-line-names = "HUB_RST_L", + "AP_RAM_ID0", + "AP_SKU_ID2", + "AP_RAM_ID1", + "", + "AP_RAM_ID2", + "UF_CAM_EN", + "WF_CAM_EN", + "TS_RESET_L", + "TS_INT_L", + "", + "EDP_BRIJ_IRQ", + "AP_EDP_BKLTEN", + "UF_CAM_MCLK", + "WF_CAM_CLK", + "EDP_BRIJ_I2C_SDA", + "EDP_BRIJ_I2C_SCL", + "UF_CAM_SDA", + "UF_CAM_SCL", + "WF_CAM_SDA", + "WF_CAM_SCL", + "AVEE_LCD_EN", + "", + "AMP_EN", + "AMP_EN2", + "AP_SAR_SENSOR_SDA", + "AP_SAR_SENSOR_SCL", + "SEL_LCM", + "HP_IRQ", + "WF_CAM_RST_L", + "UF_CAM_RST_L", + "AP_BRD_ID2", + "BRIJ_SUSPEND", + "AP_BRD_ID0", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + "AP_H1_SPI_CLK", + "AP_H1_SPI_CS_L", + "BT_UART_CTS", + "BT_UART_RTS", + "BT_UART_TXD", + "BT_UART_RXD", + "H1_AP_INT_ODL", + "", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "HP_I2C_SDA", + "HP_I2C_SCL", + "FORCED_USB_BOOT", + "AMP_BCLK", + "AMP_LRCLK", + "AMP_DIN", + "AMP_DIN_2", + "HP_BCLK", + "HP_LRCLK", + "HP_DOUT", + "HP_DIN", + "HP_MCLK", + "AP_SKU_ID0", + "AP_EC_SPI_MISO", + "AP_EC_SPI_MOSI", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "AP_SPI_CLK", + "AP_SPI_MOSI", + "AP_SPI_MISO", + /* + * AP_FLASH_WP_L is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_L. + */ + "AP_FLASH_WP_L", + "EN_PP3300_DX_EDP", + "AP_SPI_CS0_L", + "SD_CD_ODL", + "", + "", + "", + "WLAN_SW_CTRL", + "", + "REPORT_E", + "VDD_RESET_1.8V", + "ID0", + "", + "ID1", + "AVDD_LCD_EN", + "MIPI_1.8V_EN", + "", + "CODEC_PWR_EN", + "HUB_EN", + "", + "PP1800_MIPI_SW_EN", + "EN_PP3300_TOUCH", + "", + "", + "AP_SKU_ID1", + "AP_RST_REQ", + "", + "AP_BRD_ID1", + "AP_EC_INT_L", + "SDM_GRFC_3", + "", + "", + "BOOT_CONFIG_4", + "BOOT_CONFIG_2", + "", + "", + "", + "", + "EDP_BRIJ_EN", + "", + "", + "BOOT_CONFIG_3", + "WCI2_LTE_COEX_TXD", + "WCI2_LTE_COEX_RXD", + "", + "", + "", + "", + "FORCED_USB_BOOT_POL", + "AP_TS_PEN_I2C_SDA", + "AP_TS_PEN_I2C_SCL", + "DP_HOT_PLUG_DET", + "EC_IN_RW_ODL"; + + en_pp3300_touch: en-pp3300-touch { + pinmux { + pins = "gpio87"; + function = "gpio"; + }; + + pinconf { + pins = "gpio87"; + drive-strength = <2>; + bias-disable; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r0.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r0.dts new file mode 100644 index 000000000..1a62e8d43 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r0.dts @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Kingoftown board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-ti-sn65dsi86.dtsi" +#include "sc7180-trogdor-kingoftown.dtsi" + +/ { + model = "Google Kingoftown (rev0)"; + compatible = "google,kingoftown-rev0", "qcom,sc7180"; +}; + +/* + * In rev1+, the enable pin of pp3300_fp_tp will be tied to pp1800_l10a + * power rail instead, since kingoftown does not have FP. + */ +&pp3300_fp_tp { + gpio = <&tlmm 74 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&en_fp_rails>; +}; + +&tlmm { + en_fp_rails: en-fp-rails { + pinmux { + pins = "gpio74"; + function = "gpio"; + }; + + pinconf { + pins = "gpio74"; + drive-strength = <2>; + bias-disable; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r1.dts new file mode 100644 index 000000000..e0752ba7d --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r1.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Kingoftown board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-parade-ps8640.dtsi" +#include "sc7180-trogdor-kingoftown.dtsi" + +/ { + model = "Google Kingoftown (rev1+)"; + compatible = "google,kingoftown", "qcom,sc7180"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dtsi new file mode 100644 index 000000000..74f0e07ea --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dtsi @@ -0,0 +1,225 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Kingoftown board device tree source + * + * Copyright 2021 Google LLC. + */ + +/* This file must be included after sc7180-trogdor.dtsi */ +#include +#include "sc7180-trogdor-lte-sku.dtsi" + +&alc5682 { + compatible = "realtek,rt5682s"; + realtek,dmic1-clk-pin = <2>; + realtek,dmic-clk-rate-hz = <2048000>; +}; + +&ap_tp_i2c { + status = "okay"; +}; + +ap_ts_pen_1v8: &i2c4 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@10 { + compatible = "elan,ekth3500"; + reg = <0x10>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + + vcc33-supply = <&pp3300_ts>; + + reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; + }; +}; + +&keyboard_controller { + function-row-physmap = < + MATRIX_KEY(0x00, 0x02, 0) /* T1 */ + MATRIX_KEY(0x03, 0x02, 0) /* T2 */ + MATRIX_KEY(0x02, 0x02, 0) /* T3 */ + MATRIX_KEY(0x01, 0x02, 0) /* T4 */ + MATRIX_KEY(0x03, 0x04, 0) /* T5 */ + MATRIX_KEY(0x02, 0x04, 0) /* T6 */ + MATRIX_KEY(0x01, 0x04, 0) /* T7 */ + MATRIX_KEY(0x02, 0x09, 0) /* T8 */ + MATRIX_KEY(0x01, 0x09, 0) /* T9 */ + MATRIX_KEY(0x00, 0x04, 0) /* T10 */ + >; + linux,keymap = < + MATRIX_KEY(0x00, 0x02, KEY_BACK) + MATRIX_KEY(0x03, 0x02, KEY_REFRESH) + MATRIX_KEY(0x02, 0x02, KEY_ZOOM) + MATRIX_KEY(0x01, 0x02, KEY_SCALE) + MATRIX_KEY(0x03, 0x04, KEY_SYSRQ) + MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN) + MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP) + MATRIX_KEY(0x02, 0x09, KEY_MUTE) + MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN) + MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP) + + CROS_STD_MAIN_KEYMAP + >; +}; + +&panel { + compatible = "edp-panel"; +}; + +&pp3300_dx_edp { + gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>; +}; + +&sound { + compatible = "google,sc7180-trogdor"; + model = "sc7180-rt5682s-max98357a-1mic"; +}; + +&wifi { + qcom,ath10k-calibration-variant = "GO_KINGOFTOWN"; +}; + +/* PINCTRL - modifications to sc7180-trogdor.dtsi */ + +&en_pp3300_dx_edp { + pinmux { + pins = "gpio67"; + }; + + pinconf { + pins = "gpio67"; + }; +}; + +/* PINCTRL - board-specific pinctrl */ + +&tlmm { + gpio-line-names = "TP_INT_L", /* 0 */ + "AP_RAM_ID0", + "AP_SKU_ID2", + "AP_RAM_ID1", + "", + "AP_RAM_ID2", + "AP_TP_I2C_SDA", + "AP_TP_I2C_SCL", + "TS_RESET_L", + "TS_INT_L", + "", /* 10 */ + "EDP_BRIJ_IRQ", + "AP_EDP_BKLTEN", + "", + "", + "EDP_BRIJ_I2C_SDA", + "EDP_BRIJ_I2C_SCL", + "HUB_RST_L", + "", + "", + "", /* 20 */ + "", + "", + "AMP_EN", + "", + "", + "", + "", + "HP_IRQ", + "", + "", /* 30 */ + "AP_BRD_ID2", + "BRIJ_SUSPEND", + "AP_BRD_ID0", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + "AP_H1_SPI_CLK", + "AP_H1_SPI_CS_L", + "BT_UART_CTS", + "BT_UART_RTS", + "BT_UART_TXD", /* 40 */ + "BT_UART_RXD", + "H1_AP_INT_ODL", + "", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "HP_I2C_SDA", + "HP_I2C_SCL", + "FORCED_USB_BOOT", + "AMP_BCLK", + "AMP_LRCLK", /* 50 */ + "AMP_DIN", + "", + "HP_BCLK", + "HP_LRCLK", + "HP_DOUT", + "HP_DIN", + "HP_MCLK", + "AP_SKU_ID0", + "AP_EC_SPI_MISO", + "AP_EC_SPI_MOSI", /* 60 */ + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "AP_SPI_CLK", + "AP_SPI_MOSI", + "AP_SPI_MISO", + /* + * AP_FLASH_WP_L is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_L. + */ + "AP_FLASH_WP_L", + "EN_PP3300_DX_EDP", + "AP_SPI_CS0_L", + "", + "", /* 70 */ + "", + "", + "", + "EN_FP_RAILS", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RST", + "UIM2_PRESENT_L", + "UIM1_DATA", + "UIM1_CLK", /* 80 */ + "UIM1_RST", + "", + "CODEC_PWR_EN", + "HUB_EN", + "", + "", + "", + "", + "", + "AP_SKU_ID1", /* 90 */ + "AP_RST_REQ", + "", + "AP_BRD_ID1", + "AP_EC_INT_L", + "", + "", + "", + "", + "", + "", /* 100 */ + "", + "", + "", + "EDP_BRIJ_EN", + "", + "", + "", + "", + "", + "", /* 110 */ + "", + "", + "", + "", + "AP_TS_PEN_I2C_SDA", + "AP_TS_PEN_I2C_SCL", + "DP_HOT_PLUG_DET", + "EC_IN_RW_ODL"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dts new file mode 100644 index 000000000..70d5a7aa8 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dts @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Lazor Limozeen board device tree source + * + * Copyright 2020 Google LLC. + */ + +#include "sc7180-trogdor-lazor-limozeen-nots-r5.dts" + +/ { + model = "Google Lazor Limozeen without Touchscreen (rev4)"; + compatible = "google,lazor-rev4-sku5", "qcom,sc7180"; +}; + +/* + * rev4-sku5 was built with a different trackpad. + */ +/delete-node/&trackpad; +&ap_tp_i2c { + trackpad: trackpad@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + pinctrl-names = "default"; + pinctrl-0 = <&tp_int_odl>; + + interrupt-parent = <&tlmm>; + interrupts = <58 IRQ_TYPE_EDGE_FALLING>; + + vdd-supply = <&pp3300_fp_tp>; + hid-descr-addr = <0x20>; + + wakeup-source; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts new file mode 100644 index 000000000..235cda2bb --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Lazor Limozeen board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-ti-sn65dsi86.dtsi" +#include "sc7180-trogdor-lazor.dtsi" +#include "sc7180-trogdor-lte-sku.dtsi" + +/ { + model = "Google Lazor Limozeen without Touchscreen (rev5 - rev8)"; + /* No sku5 post-rev5 */ + compatible = "google,lazor-rev5-sku5", "google,lazor-rev5-sku6", + "google,lazor-rev6-sku6", "google,lazor-rev7-sku6", + "google,lazor-rev8-sku6", "qcom,sc7180"; +}; + +/delete-node/&ap_ts; + +&panel { + compatible = "innolux,n116bca-ea1", "innolux,n116bge"; +}; + +&sdhc_2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts new file mode 100644 index 000000000..913b5fc3b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts @@ -0,0 +1,28 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Lazor Limozeen board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-parade-ps8640.dtsi" +#include "sc7180-trogdor-lazor.dtsi" +#include "sc7180-trogdor-lte-sku.dtsi" + +/ { + model = "Google Lazor Limozeen without Touchscreen (rev9+)"; + compatible = "google,lazor-sku6", "qcom,sc7180"; +}; + +/delete-node/&ap_ts; + +&panel { + compatible = "edp-panel"; +}; + +&sdhc_2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r4.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r4.dts new file mode 100644 index 000000000..d42dcd421 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r4.dts @@ -0,0 +1,46 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Lazor Limozeen board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-ti-sn65dsi86.dtsi" +#include "sc7180-trogdor-lazor.dtsi" +#include "sc7180-trogdor-lte-sku.dtsi" + +/ { + model = "Google Lazor Limozeen (rev4 - rev8)"; + compatible = "google,lazor-rev4-sku4", "google,lazor-rev5-sku4", + "google,lazor-rev6-sku4", "google,lazor-rev7-sku4", + "google,lazor-rev8-sku4", "qcom,sc7180"; +}; + +/delete-node/&ap_ts; + +&ap_ts_pen_1v8 { + ap_ts: touchscreen@10 { + compatible = "elan,ekth3500"; + reg = <0x10>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + + vcc33-supply = <&pp3300_ts>; + + reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; + }; +}; + +&panel { + compatible = "auo,b116xa01"; +}; + +&sdhc_2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r9.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r9.dts new file mode 100644 index 000000000..15d77dc5f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r9.dts @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Lazor Limozeen board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-parade-ps8640.dtsi" +#include "sc7180-trogdor-lazor.dtsi" +#include "sc7180-trogdor-lte-sku.dtsi" + +/ { + model = "Google Lazor Limozeen (rev9+)"; + compatible = "google,lazor-sku4", "qcom,sc7180"; +}; + +/delete-node/&ap_ts; + +&ap_ts_pen_1v8 { + ap_ts: touchscreen@10 { + compatible = "elan,ekth3500"; + reg = <0x10>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + + vcc33-supply = <&pp3300_ts>; + + reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; + }; +}; + +&panel { + compatible = "auo,b116xa01"; +}; + +&sdhc_2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts new file mode 100644 index 000000000..d49de65aa --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Lazor board device tree source + * + * Copyright 2020 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-ti-sn65dsi86.dtsi" +#include "sc7180-trogdor-lazor.dtsi" + +/ { + model = "Google Lazor (rev0)"; + compatible = "google,lazor-rev0", "qcom,sc7180"; +}; + +&sn65dsi86_out { + /* + * Lane 0 was incorrectly mapped on the cable, but we've now decided + * that the cable is canon and in -rev1+ we'll make a board change + * that means we no longer need the swizzle. + */ + lane-polarities = <1 0>; +}; + +&usb_hub_2_x { + vdd-supply = <&pp3300_l7c>; +}; + +&usb_hub_3_x { + vdd-supply = <&pp3300_l7c>; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-kb.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-kb.dts new file mode 100644 index 000000000..919bfaea6 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-kb.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Lazor board device tree source + * + * Copyright 2020 Google LLC. + */ + +#include "sc7180-trogdor-lazor-r1.dts" + +/ { + model = "Google Lazor (rev1 - 2) with KB Backlight"; + compatible = "google,lazor-rev1-sku2", "google,lazor-rev2-sku2", "qcom,sc7180"; +}; + +&keyboard_backlight { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts new file mode 100644 index 000000000..eb20157f6 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Lazor board device tree source + * + * Copyright 2020 Google LLC. + */ + +#include "sc7180-trogdor-lazor-r1.dts" +#include "sc7180-trogdor-lte-sku.dtsi" + +/ { + model = "Google Lazor (rev1 - 2) with LTE"; + compatible = "google,lazor-rev1-sku0", "google,lazor-rev2-sku0", "qcom,sc7180"; +}; + +&ap_sar_sensor_i2c { + status = "okay"; +}; + +&keyboard_backlight { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts new file mode 100644 index 000000000..80c7108bc --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Lazor board device tree source + * + * Copyright 2020 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-ti-sn65dsi86.dtsi" +#include "sc7180-trogdor-lazor.dtsi" + +/ { + model = "Google Lazor (rev1 - 2)"; + compatible = "google,lazor-rev1", "google,lazor-rev2", "qcom,sc7180"; +}; + + +&usb_hub_2_x { + vdd-supply = <&pp3300_l7c>; +}; + +&usb_hub_3_x { + vdd-supply = <&pp3300_l7c>; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts new file mode 100644 index 000000000..6ff81c1f7 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts @@ -0,0 +1,25 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Lazor board device tree source + * + * Copyright 2020 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-ti-sn65dsi86.dtsi" +#include "sc7180-trogdor-lazor.dtsi" +#include "sc7180-lite.dtsi" + +/ { + model = "Google Lazor (rev3 - 8) with KB Backlight"; + compatible = "google,lazor-rev3-sku2", "google,lazor-rev4-sku2", + "google,lazor-rev5-sku2", "google,lazor-rev6-sku2", + "google,lazor-rev7-sku2", "google,lazor-rev8-sku2", + "qcom,sc7180"; +}; + +&keyboard_backlight { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts new file mode 100644 index 000000000..e58e36e35 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Lazor board device tree source + * + * Copyright 2020 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-ti-sn65dsi86.dtsi" +#include "sc7180-trogdor-lazor.dtsi" +#include "sc7180-trogdor-lte-sku.dtsi" + +/ { + model = "Google Lazor (rev3 - 8) with LTE"; + compatible = "google,lazor-rev3-sku0", "google,lazor-rev4-sku0", + "google,lazor-rev5-sku0", "google,lazor-rev6-sku0", + "google,lazor-rev7-sku0", "google,lazor-rev8-sku0", + "qcom,sc7180"; +}; + +&ap_sar_sensor_i2c { + status = "okay"; +}; + +&keyboard_backlight { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts new file mode 100644 index 000000000..76c83f88c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Lazor board device tree source + * + * Copyright 2020 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-ti-sn65dsi86.dtsi" +#include "sc7180-trogdor-lazor.dtsi" +#include "sc7180-lite.dtsi" + +/ { + model = "Google Lazor (rev3 - 8)"; + compatible = "google,lazor-rev3", "google,lazor-rev4", + "google,lazor-rev5", "google,lazor-rev6", "google,lazor-rev7", + "google,lazor-rev8", "qcom,sc7180"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts new file mode 100644 index 000000000..960f7b7ce --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Lazor board device tree source + * + * Copyright 2020 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-parade-ps8640.dtsi" +#include "sc7180-trogdor-lazor.dtsi" +#include "sc7180-lite.dtsi" + +/ { + model = "Google Lazor (rev9+) with KB Backlight"; + compatible = "google,lazor-sku2", "qcom,sc7180"; +}; + +&keyboard_backlight { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts new file mode 100644 index 000000000..38027f13b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Lazor board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-parade-ps8640.dtsi" +#include "sc7180-trogdor-lazor.dtsi" +#include "sc7180-trogdor-lte-sku.dtsi" + +/ { + model = "Google Lazor (rev9+) with LTE"; + compatible = "google,lazor-sku0", "qcom,sc7180"; +}; + +&ap_sar_sensor_i2c { + status = "okay"; +}; + +&keyboard_backlight { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9.dts new file mode 100644 index 000000000..56dd22265 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Lazor board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-parade-ps8640.dtsi" +#include "sc7180-trogdor-lazor.dtsi" +#include "sc7180-lite.dtsi" + +/ { + model = "Google Lazor (rev9+)"; + compatible = "google,lazor", "qcom,sc7180"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi new file mode 100644 index 000000000..002663d75 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi @@ -0,0 +1,221 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Lazor board device tree source + * + * Copyright 2020 Google LLC. + */ + +/* This file must be included after sc7180-trogdor.dtsi */ +#include + +&ap_sar_sensor { + semtech,cs0-ground; + semtech,combined-sensors = <3>; + semtech,resolution = "fine"; + semtech,startup-sensor = <0>; + semtech,proxraw-strength = <8>; + semtech,avg-pos-strength = <64>; +}; + +&ap_tp_i2c { + status = "okay"; +}; + +/* + * Lazor is stuffed with a 47k NTC as charger thermistor which currently is + * not supported by the PM6150 ADC driver. Disable the charger thermal zone + * to avoid using bogus temperature values. + */ +&charger_thermal { + status = "disabled"; +}; + +ap_ts_pen_1v8: &i2c4 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + + post-power-on-delay-ms = <20>; + hid-descr-addr = <0x0001>; + + vdd-supply = <&pp3300_ts>; + }; +}; + +&panel { + compatible = "boe,nv133fhm-n62"; +}; + +&pm6150_adc { + /delete-node/ charger-thermistor@4f; +}; + +&pm6150_adc_tm { + status = "disabled"; + + /delete-node/ charger-thermistor@0; +}; + +&trackpad { + interrupts = <58 IRQ_TYPE_EDGE_FALLING>; +}; + +&wifi { + qcom,ath10k-calibration-variant = "GO_LAZOR"; +}; + +/* PINCTRL - modifications to sc7180-trogdor.dtsi */ + +&trackpad_int_1v8_odl { + pinmux { + pins = "gpio58"; + }; + + pinconf { + pins = "gpio58"; + }; +}; + +&ts_reset_l { + pinconf { + /* This pin is not connected on -rev0, pull up to park. */ + /delete-property/bias-disable; + bias-pull-up; + }; +}; + +/* PINCTRL - board-specific pinctrl */ + +&tlmm { + gpio-line-names = "ESIM_MISO", + "ESIM_MOSI", + "ESIM_CLK", + "ESIM_CS_L", + "", + "", + "AP_TP_I2C_SDA", + "AP_TP_I2C_SCL", + "TS_RESET_L", + "TS_INT_L", + "", + "EDP_BRIJ_IRQ", + "AP_EDP_BKLTEN", + "AP_RAM_ID2", + "", + "EDP_BRIJ_I2C_SDA", + "EDP_BRIJ_I2C_SCL", + "HUB_RST_L", + "", + "AP_RAM_ID1", + "AP_SKU_ID2", + "", + "", + "AMP_EN", + "P_SENSOR_INT_L", + "AP_SAR_SENSOR_SDA", + "AP_SAR_SENSOR_SCL", + "", + "HP_IRQ", + "AP_RAM_ID0", + "EN_PP3300_DX_EDP", + "AP_BRD_ID2", + "BRIJ_SUSPEND", + "AP_BRD_ID0", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + "AP_H1_SPI_CLK", + "AP_H1_SPI_CS_L", + "", + "", + "", + "", + "H1_AP_INT_ODL", + "", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "HP_I2C_SDA", + "HP_I2C_SCL", + "FORCED_USB_BOOT", + "", + "", + "AMP_DIN", + "", + "HP_BCLK", + "HP_LRCLK", + "HP_DOUT", + "HP_DIN", + "HP_MCLK", + "TRACKPAD_INT_1V8_ODL", + "AP_EC_SPI_MISO", + "AP_EC_SPI_MOSI", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "AP_SPI_CLK", + "AP_SPI_MOSI", + "AP_SPI_MISO", + /* + * AP_FLASH_WP_L is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_L. + */ + "AP_FLASH_WP_L", + "DBG_SPI_HOLD_L", + "AP_SPI_CS0_L", + "", + "", + "", + "", + "", + "", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RST", + "UIM2_PRESENT", + "UIM1_DATA", + "UIM1_CLK", + "UIM1_RST", + "", + "EN_PP3300_CODEC", + "EN_PP3300_HUB", + "", + "", + "", + "", + "", + "AP_SKU_ID1", + "AP_RST_REQ", + "", + "AP_BRD_ID1", + "AP_EC_INT_L", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "EDP_BRIJ_EN", + "AP_SKU_ID0", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "AP_TS_PEN_I2C_SDA", + "AP_TS_PEN_I2C_SCL", + "DP_HOT_PLUG_DET", + "EC_IN_RW_ODL"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi new file mode 100644 index 000000000..fd4b71203 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Trogdor dts fragment for LTE SKUs + * + * Copyright 2020 Google LLC. + */ + +&ap_sar_sensor { + label = "proximity-wifi-lte"; +}; + +&mpss_mem { + reg = <0x0 0x86000000 0x0 0x8c00000>; +}; + +&remoteproc_mpss { + firmware-name = "qcom/sc7180-trogdor/modem/mba.mbn", + "qcom/sc7180-trogdor/modem/qdsp6sw.mbn"; +}; + +&ipa { + status = "okay"; + + /* + * Trogdor doesn't have QHEE (Qualcomm's EL2 blob), so the + * modem needs to cover certain init steps (GSI init), and + * the AP needs to wait for it. + */ + modem-init; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-auo.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-auo.dts new file mode 100644 index 000000000..2767817fb --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-auo.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Mrbland board device tree source + * + * Copyright 2021 Google LLC. + * + * SKU: 0x0 => 0 + * - bits 7..4: Panel ID: 0x0 (AUO) + */ + +/dts-v1/; + +#include "sc7180-trogdor-mrbland-rev0.dtsi" + +/ { + model = "Google Mrbland rev0 AUO panel board"; + compatible = "google,mrbland-rev0-sku0", "qcom,sc7180"; +}; + +&panel { + compatible = "auo,b101uan08.3"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-boe.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-boe.dts new file mode 100644 index 000000000..711485574 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-boe.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Mrbland board device tree source + * + * Copyright 2021 Google LLC. + * + * SKU: 0x10 => 16 + * - bits 7..4: Panel ID: 0x1 (BOE) + */ + +/dts-v1/; + +#include "sc7180-trogdor-mrbland-rev0.dtsi" + +/ { + model = "Google Mrbland rev0 BOE panel board"; + compatible = "google,mrbland-rev0-sku16", "qcom,sc7180"; +}; + +&panel { + compatible = "boe,tv101wum-n53"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0.dtsi new file mode 100644 index 000000000..7bc8402c0 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0.dtsi @@ -0,0 +1,53 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Mrbland board device tree source + * + * Copyright 2021 Google LLC. + * + */ + +/dts-v1/; + +#include "sc7180-trogdor-mrbland.dtsi" + +&avdd_lcd { + gpio = <&tlmm 80 GPIO_ACTIVE_HIGH>; +}; + +&panel { + enable-gpios = <&tlmm 76 GPIO_ACTIVE_HIGH>; +}; + +&v1p8_mipi { + gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>; +}; + +/* PINCTRL - modifications to sc7180-trogdor-mrbland.dtsi */ +&avdd_lcd_en { + pinmux { + pins = "gpio80"; + }; + + pinconf { + pins = "gpio80"; + }; +}; + +&mipi_1800_en { + pinmux { + pins = "gpio81"; + }; + + pinconf { + pins = "gpio81"; + }; +}; +&vdd_reset_1800 { + pinmux { + pins = "gpio76"; + }; + + pinconf { + pins = "gpio76"; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-auo.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-auo.dts new file mode 100644 index 000000000..275313ef7 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-auo.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Mrbland board device tree source + * + * Copyright 2021 Google LLC. + * + * SKU: 0x600 => 1536 + * - bits 11..8: Panel ID: 0x6 (AUO) + */ + +/dts-v1/; + +#include "sc7180-trogdor-mrbland.dtsi" + +/ { + model = "Google Mrbland rev1+ AUO panel board"; + compatible = "google,mrbland-sku1536", "qcom,sc7180"; +}; + +&panel { + compatible = "auo,b101uan08.3"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-boe.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-boe.dts new file mode 100644 index 000000000..87c6b6c30 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-boe.dts @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Mrbland board device tree source + * + * Copyright 2021 Google LLC. + * + * SKU: 0x300 => 768 + * - bits 11..8: Panel ID: 0x3 (BOE) + */ + +/dts-v1/; + +#include "sc7180-trogdor-mrbland.dtsi" + +/ { + model = "Google Mrbland (rev1 - 2) BOE panel board"; + /* Uses ID 768 on rev1 and 1024 on rev2+ */ + compatible = "google,mrbland-sku1024", "google,mrbland-sku768", + "qcom,sc7180"; +}; + +&panel { + compatible = "boe,tv101wum-n53"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland.dtsi new file mode 100644 index 000000000..97cba7f80 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland.dtsi @@ -0,0 +1,350 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Mrbland board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" + +/* This board only has 1 USB Type-C port. */ +/delete-node/ &usb_c1; + +/ { + avdd_lcd: avdd-lcd { + compatible = "regulator-fixed"; + regulator-name = "avdd_lcd"; + + gpio = <&tlmm 88 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&avdd_lcd_en>; + + vin-supply = <&pp5000_a>; + }; + + avee_lcd: avee-lcd { + compatible = "regulator-fixed"; + regulator-name = "avee_lcd"; + + gpio = <&tlmm 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&avee_lcd_en>; + + vin-supply = <&pp5000_a>; + }; + + v1p8_mipi: v1p8-mipi { + compatible = "regulator-fixed"; + regulator-name = "v1p8_mipi"; + + gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&mipi_1800_en>; + + vin-supply = <&pp3300_a>; + }; +}; + +&backlight { + pwms = <&cros_ec_pwm 0>; +}; + +&camcc { + status = "okay"; +}; + +&cros_ec { + keyboard-controller { + compatible = "google,cros-ec-keyb-switches"; + }; +}; + +&dsi0 { + + panel: panel@0 { + /* Compatible will be filled in per-board */ + reg = <0>; + enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vdd_reset_1800>; + avdd-supply = <&avdd_lcd>; + avee-supply = <&avee_lcd>; + pp1800-supply = <&v1p8_mipi>; + pp3300-supply = <&pp3300_dx_edp>; + backlight = <&backlight>; + rotation = <270>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; + + ports { + port@1 { + endpoint { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&gpio_keys { + status = "okay"; +}; + +&i2c4 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@5d { + compatible = "goodix,gt7375p"; + reg = <0x5d>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; + + vdd-supply = <&pp3300_ts>; + }; +}; + +&pp1800_uf_cam { + status = "okay"; +}; + +&pp1800_wf_cam { + status = "okay"; +}; + +&pp2800_uf_cam { + status = "okay"; +}; + +&pp2800_wf_cam { + status = "okay"; +}; + +&wifi { + qcom,ath10k-calibration-variant = "GO_MRBLAND"; +}; + +/* + * No eDP on this board but it's logically the same signal so just give it + * a new name and assign the proper GPIO. + */ +pp3300_disp_on: &pp3300_dx_edp { + gpio = <&tlmm 85 GPIO_ACTIVE_HIGH>; +}; + +/* PINCTRL - modifications to sc7180-trogdor.dtsi */ + +/* + * No eDP on this board but it's logically the same signal so just give it + * a new name and assign the proper GPIO. + */ + +tp_en: &en_pp3300_dx_edp { + pinmux { + pins = "gpio85"; + }; + + pinconf { + pins = "gpio85"; + }; +}; + +/* PINCTRL - board-specific pinctrl */ + +&tlmm { + gpio-line-names = "HUB_RST_L", + "AP_RAM_ID0", + "AP_SKU_ID2", + "AP_RAM_ID1", + "", + "AP_RAM_ID2", + "UF_CAM_EN", + "WF_CAM_EN", + "TS_RESET_L", + "TS_INT_L", + "", + "", + "AP_EDP_BKLTEN", + "UF_CAM_MCLK", + "WF_CAM_CLK", + "", + "", + "UF_CAM_SDA", + "UF_CAM_SCL", + "WF_CAM_SDA", + "WF_CAM_SCL", + "AVEE_LCD_EN", + "", + "AMP_EN", + "", + "", + "", + "", + "HP_IRQ", + "WF_CAM_RST_L", + "UF_CAM_RST_L", + "AP_BRD_ID2", + "", + "AP_BRD_ID0", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + "AP_H1_SPI_CLK", + "AP_H1_SPI_CS_L", + "BT_UART_CTS", + "BT_UART_RTS", + "BT_UART_TXD", + "BT_UART_RXD", + "H1_AP_INT_ODL", + "", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "HP_I2C_SDA", + "HP_I2C_SCL", + "FORCED_USB_BOOT", + "AMP_BCLK", + "AMP_LRCLK", + "AMP_DIN", + "PEN_DET_ODL", + "HP_BCLK", + "HP_LRCLK", + "HP_DOUT", + "HP_DIN", + "HP_MCLK", + "AP_SKU_ID0", + "AP_EC_SPI_MISO", + "AP_EC_SPI_MOSI", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "AP_SPI_CLK", + "AP_SPI_MOSI", + "AP_SPI_MISO", + /* + * AP_FLASH_WP_L is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_L. + */ + "AP_FLASH_WP_L", + "", + "AP_SPI_CS0_L", + "", + "", + "", + "", + "WLAN_SW_CTRL", + "", + "REPORT_E", + "", + "ID0", + "", + "ID1", + "", + "", + "", + "CODEC_PWR_EN", + "HUB_EN", + "TP_EN", + "MIPI_1.8V_EN", + "VDD_RESET_1.8V", + "AVDD_LCD_EN", + "", + "AP_SKU_ID1", + "AP_RST_REQ", + "", + "AP_BRD_ID1", + "AP_EC_INT_L", + "SDM_GRFC_3", + "", + "", + "BOOT_CONFIG_4", + "BOOT_CONFIG_2", + "", + "", + "", + "", + "", + "", + "", + "BOOT_CONFIG_3", + "WCI2_LTE_COEX_TXD", + "WCI2_LTE_COEX_RXD", + "", + "", + "", + "", + "FORCED_USB_BOOT_POL", + "AP_TS_PEN_I2C_SDA", + "AP_TS_PEN_I2C_SCL", + "DP_HOT_PLUG_DET", + "EC_IN_RW_ODL"; + + avdd_lcd_en: avdd-lcd-en { + pinmux { + pins = "gpio88"; + function = "gpio"; + }; + + pinconf { + pins = "gpio88"; + drive-strength = <2>; + bias-disable; + }; + }; + + avee_lcd_en: avee-lcd-en { + pinmux { + pins = "gpio21"; + function = "gpio"; + }; + + pinconf { + pins = "gpio21"; + drive-strength = <2>; + bias-disable; + }; + }; + + mipi_1800_en: mipi-1800-en { + pinmux { + pins = "gpio86"; + function = "gpio"; + }; + + pinconf { + pins = "gpio86"; + drive-strength = <2>; + bias-disable; + }; + }; + + vdd_reset_1800: vdd-reset-1800 { + pinmux { + pins = "gpio87"; + function = "gpio"; + }; + + pinconf { + pins = "gpio87"; + drive-strength = <2>; + bias-disable; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi new file mode 100644 index 000000000..6a84fba17 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi @@ -0,0 +1,111 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Trogdor dts fragment for the boards with Parade ps8640 edp bridge + * + * Copyright 2021 Google LLC. + */ + +#include + +/ { + pp3300_brij_ps8640: pp3300-brij-ps8640 { + compatible = "regulator-fixed"; + status = "okay"; + regulator-name = "pp3300_brij_ps8640"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 32 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&en_pp3300_edp_brij_ps8640>; + + vin-supply = <&pp3300_a>; + }; +}; + +&dsi0_out { + remote-endpoint = <&ps8640_in>; +}; + +edp_brij_i2c: &i2c2 { + status = "okay"; + clock-frequency = <400000>; + + ps8640_bridge: bridge@8 { + compatible = "parade,ps8640"; + reg = <0x8>; + + powerdown-gpios = <&tlmm 104 GPIO_ACTIVE_LOW>; + reset-gpios = <&tlmm 11 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&edp_brij_en>, <&edp_brij_ps8640_rst>; + + vdd12-supply = <&pp1200_brij>; + vdd33-supply = <&pp3300_brij_ps8640>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + ps8640_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + ps8640_out: endpoint { + remote-endpoint = <&panel_in_edp>; + }; + }; + }; + + aux-bus { + panel: panel { + /* Compatible will be filled in per-board */ + power-supply = <&pp3300_dx_edp>; + backlight = <&backlight>; + + port { + panel_in_edp: endpoint { + remote-endpoint = <&ps8640_out>; + }; + }; + }; + }; + }; +}; + +&tlmm { + edp_brij_ps8640_rst: edp-brij-ps8640-rst { + pinmux { + pins = "gpio11"; + function = "gpio"; + }; + + pinconf { + pins = "gpio11"; + drive-strength = <2>; + bias-disable; + }; + }; + + en_pp3300_edp_brij_ps8640: en-pp3300-edp-brij-ps8640 { + pinmux { + pins = "gpio32"; + function = "gpio"; + }; + + pinconf { + pins = "gpio32"; + drive-strength = <2>; + bias-disable; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts new file mode 100644 index 000000000..767cb7450 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Pazquel board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-parade-ps8640.dtsi" +#include "sc7180-trogdor-pazquel.dtsi" +#include "sc7180-trogdor-lte-sku.dtsi" + +/ { + model = "Google Pazquel (Parade,LTE)"; + compatible = "google,pazquel-sku6", "google,pazquel-sku4", "qcom,sc7180"; +}; + +&ap_sar_sensor_i2c { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-ti.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-ti.dts new file mode 100644 index 000000000..9145b74e9 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-ti.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Pazquel board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-ti-sn65dsi86.dtsi" +#include "sc7180-trogdor-pazquel.dtsi" +#include "sc7180-trogdor-lte-sku.dtsi" + +/ { + model = "Google Pazquel (TI,LTE)"; + compatible = "google,pazquel-sku0", "google,pazquel-sku2", "qcom,sc7180"; +}; + +&ap_sar_sensor_i2c { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-parade.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-parade.dts new file mode 100644 index 000000000..9a0e6632a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-parade.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Pazquel board device tree source + * + * Copyright 2022 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-parade-ps8640.dtsi" +#include "sc7180-trogdor-pazquel.dtsi" + +/ { + model = "Google Pazquel (Parade)"; + compatible = "google,pazquel-sku5", "qcom,sc7180"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-ti.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-ti.dts new file mode 100644 index 000000000..47c5970d8 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-ti.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Pazquel board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-ti-sn65dsi86.dtsi" +#include "sc7180-trogdor-pazquel.dtsi" + +/ { + model = "Google Pazquel (TI)"; + compatible = "google,pazquel-sku1", "qcom,sc7180"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi new file mode 100644 index 000000000..2e35c69a9 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi @@ -0,0 +1,222 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Pazquel board device tree source + * + * Copyright 2021 Google LLC. + */ + +/* This file must be included after sc7180-trogdor.dtsi */ +#include + +&ap_sar_sensor { + compatible = "semtech,sx9324"; + semtech,ph0-pin = <1 3 3>; + semtech,ph1-pin = <3 1 3>; + semtech,ph2-pin = <1 3 3>; + semtech,ph3-pin = <0 0 0>; + semtech,ph01-resolution = <1024>; + semtech,ph23-resolution = <1024>; + semtech,startup-sensor = <1>; + semtech,ph01-proxraw-strength = <3>; + semtech,ph23-proxraw-strength = <1>; + semtech,avg-pos-strength = <128>; + semtech,input-analog-gain = <0>; + semtech,cs-idle-sleep = "gnd"; + + /delete-property/ svdd-supply; + vdd-supply = <&pp1800_prox>; +}; + +/delete-node/&trackpad; +&ap_tp_i2c { + status = "okay"; + trackpad: trackpad@15 { + compatible = "hid-over-i2c"; + reg = <0x15>; + pinctrl-names = "default"; + pinctrl-0 = <&tp_int_odl>; + + interrupt-parent = <&tlmm>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + + vdd-supply = <&pp3300_fp_tp>; + post-power-on-delay-ms = <100>; + hid-descr-addr = <0x0001>; + + wakeup-source; + }; +}; + +&keyboard_controller { + function-row-physmap = < + MATRIX_KEY(0x00, 0x02, 0) /* T1 */ + MATRIX_KEY(0x03, 0x02, 0) /* T2 */ + MATRIX_KEY(0x02, 0x02, 0) /* T3 */ + MATRIX_KEY(0x01, 0x02, 0) /* T4 */ + MATRIX_KEY(0x03, 0x04, 0) /* T5 */ + MATRIX_KEY(0x02, 0x04, 0) /* T6 */ + MATRIX_KEY(0x01, 0x04, 0) /* T7 */ + MATRIX_KEY(0x02, 0x09, 0) /* T8 */ + MATRIX_KEY(0x01, 0x09, 0) /* T9 */ + MATRIX_KEY(0x00, 0x04, 0) /* T10 */ + >; + linux,keymap = < + MATRIX_KEY(0x00, 0x02, KEY_BACK) + MATRIX_KEY(0x03, 0x02, KEY_REFRESH) + MATRIX_KEY(0x02, 0x02, KEY_ZOOM) + MATRIX_KEY(0x01, 0x02, KEY_SCALE) + MATRIX_KEY(0x03, 0x04, KEY_SYSRQ) + MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN) + MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP) + MATRIX_KEY(0x02, 0x09, KEY_MUTE) + MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN) + MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP) + CROS_STD_MAIN_KEYMAP + >; +}; + +&panel { + compatible = "edp-panel"; +}; + +&pp3300_dx_edp { + gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>; +}; + +&en_pp3300_dx_edp { + pinmux { + pins = "gpio67"; + }; + + pinconf { + pins = "gpio67"; + }; +}; + +/* PINCTRL - board-specific pinctrl */ + +&tlmm { + gpio-line-names = "TP_INT_ODL", + "AP_RAM_ID0", + "AP_SKU_ID2", + "AP_RAM_ID1", + "", + "AP_RAM_ID2", + "AP_TP_I2C_SDA", + "AP_TP_I2C_SCL", + "TS_RESET_L", + "TS_INT_L", + "", + "EDP_BRIJ_IRQ", + "AP_EDP_BKLTEN", + "", + "", + "EDP_BRIJ_I2C_SDA", + "EDP_BRIJ_I2C_SCL", + "HUB_RST_L", + "", + "", + "", + "", + "", + "AMP_EN", + "P_SENSOR_INT_L", + "AP_SAR_SENSOR_SDA", + "AP_SAR_SENSOR_SCL", + "", + "HP_IRQ", + "", + "", + "AP_BRD_ID2", + "BRIJ_SUSPEND", + "AP_BRD_ID0", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + "AP_H1_SPI_CLK", + "AP_H1_SPI_CS_L", + "", + "", + "", + "", + "H1_AP_INT_ODL", + "", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "HP_I2C_SDA", + "HP_I2C_SCL", + "FORCED_USB_BOOT", + "AMP_BCLK", + "AMP_LRCLK", + "AMP_DIN", + "", + "HP_BCLK", + "HP_LRCLK", + "HP_DOUT", + "HP_DIN", + "HP_MCLK", + "AP_SKU_ID0", + "AP_EC_SPI_MISO", + "AP_EC_SPI_MOSI", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "AP_SPI_CLK", + "AP_SPI_MOSI", + "AP_SPI_MISO", + /* + * AP_FLASH_WP_L is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_L. + */ + "AP_FLASH_WP_L", + "EN_PP3300_DX_EDP", + "AP_SPI_CS0_L", + "", + "", + "", + "", + "", + "", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RST", + "UIM2_PRESENT", + "UIM1_DATA", + "UIM1_CLK", + "UIM1_RST", + "", + "CODEC_PWR_EN", + "HUB_EN", + "", + "", + "", + "", + "", + "AP_SKU_ID1", + "AP_RST_REQ", + "", + "AP_BRD_ID1", + "AP_EC_INT_L", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "EDP_BRIJ_EN", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "AP_TS_PEN_I2C_SDA", + "AP_TS_PEN_I2C_SCL", + "DP_HOT_PLUG_DET", + "EC_IN_RW_ODL"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1-lte.dts new file mode 100644 index 000000000..0202f03ea --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1-lte.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Pompom board device tree source + * + * Copyright 2020 Google LLC. + */ + +#include "sc7180-trogdor-pompom-r1.dts" +#include "sc7180-trogdor-lte-sku.dtsi" + +/ { + model = "Google Pompom (rev1) with LTE"; + compatible = "google,pompom-rev1-sku0", "qcom,sc7180"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts new file mode 100644 index 000000000..8467ff41e --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts @@ -0,0 +1,43 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Pompom board device tree source + * + * Copyright 2020 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor-pompom.dtsi" + +/delete-node/ &keyboard_controller; +#include + +/ { + model = "Google Pompom (rev1)"; + compatible = "google,pompom-rev1", "qcom,sc7180"; +}; + +/* + * Pompom rev1 is stuffed with a 47k NTC as charger thermistor which currently + * is not supported by the PM6150 ADC driver. Disable the charger thermal zone + * to avoid using bogus temperature values. + */ +&charger_thermal { + status = "disabled"; +}; + +&pm6150_adc { + /delete-node/ charger-thermistor@4f; +}; + +&pm6150_adc_tm { + /delete-node/ charger-thermistor@0; +}; + +&usb_hub_2_x { + vdd-supply = <&pp3300_l7c>; +}; + +&usb_hub_3_x { + vdd-supply = <&pp3300_l7c>; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2-lte.dts new file mode 100644 index 000000000..00e187c08 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2-lte.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Pompom board device tree source + * + * Copyright 2020 Google LLC. + */ + +#include "sc7180-trogdor-pompom-r2.dts" +#include "sc7180-trogdor-lte-sku.dtsi" + +/ { + model = "Google Pompom (rev2) with LTE"; + compatible = "google,pompom-rev2-sku0", "qcom,sc7180"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dts new file mode 100644 index 000000000..88cf2246c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dts @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Pompom board device tree source + * + * Copyright 2020 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor-pompom.dtsi" + +/ { + model = "Google Pompom (rev2)"; + compatible = "google,pompom-rev2", "qcom,sc7180"; +}; + +/* + * Pompom rev2 is stuffed with a 47k NTC as charger thermistor which currently + * is not supported by the PM6150 ADC driver. Disable the charger thermal zone + * to avoid using bogus temperature values. + */ +&charger_thermal { + status = "disabled"; +}; + +&pm6150_adc { + /delete-node/ charger-thermistor@4f; +}; + +&pm6150_adc_tm { + /delete-node/ charger-thermistor@0; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3-lte.dts new file mode 100644 index 000000000..e90b73c35 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3-lte.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Pompom board device tree source + * + * Copyright 2021 Google LLC. + */ + +#include "sc7180-trogdor-pompom-r3.dts" +#include "sc7180-trogdor-lte-sku.dtsi" + +/ { + model = "Google Pompom (rev3+) with LTE"; + compatible = "google,pompom-sku0", "qcom,sc7180"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3.dts new file mode 100644 index 000000000..f8aac63a5 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Pompom board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor-pompom.dtsi" + +/ { + model = "Google Pompom (rev3+)"; + compatible = "google,pompom", "qcom,sc7180"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi new file mode 100644 index 000000000..a7582fb54 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi @@ -0,0 +1,326 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Pompom board device tree source + * + * Copyright 2020 Google LLC. + */ + +#include "sc7180-trogdor.dtsi" +/* Must come after sc7180-trogdor.dtsi to modify cros_ec */ +#include +#include "sc7180-trogdor-ti-sn65dsi86.dtsi" + +/ { + thermal-zones { + 5v-choke-thermal { + polling-delay-passive = <0>; + polling-delay = <250>; + + thermal-sensors = <&pm6150_adc_tm 1>; + + trips { + 5v-choke-crit { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + }; +}; + +&alc5682 { + realtek,dmic-clk-driving-high; +}; + +&ap_tp_i2c { + status = "okay"; +}; + +&cpu6_alert0 { + temperature = <60000>; +}; + +&cpu6_alert1 { + temperature = <65000>; +}; + +&cpu6_thermal { + sustainable-power = <1124>; +}; + +&cpu7_alert0 { + temperature = <60000>; +}; + +&cpu7_alert1 { + temperature = <65000>; +}; + +&cpu7_thermal { + sustainable-power = <1124>; +}; + +&cpu8_alert0 { + temperature = <60000>; +}; + +&cpu8_alert1 { + temperature = <65000>; +}; + +&cpu8_thermal { + sustainable-power = <1124>; +}; + +&cpu9_alert0 { + temperature = <60000>; +}; + +&cpu9_alert1 { + temperature = <65000>; +}; + +&cpu9_thermal { + sustainable-power = <1124>; +}; + +&gpio_keys { + status = "okay"; +}; + +ap_ts_pen_1v8: &i2c4 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + + post-power-on-delay-ms = <20>; + hid-descr-addr = <0x0001>; + + vdd-supply = <&pp3300_ts>; + }; +}; + +&keyboard_controller { + function-row-physmap = < + MATRIX_KEY(0x00, 0x02, 0) /* T1 */ + MATRIX_KEY(0x03, 0x02, 0) /* T2 */ + MATRIX_KEY(0x02, 0x02, 0) /* T3 */ + MATRIX_KEY(0x01, 0x02, 0) /* T4 */ + MATRIX_KEY(0x03, 0x04, 0) /* T5 */ + MATRIX_KEY(0x02, 0x04, 0) /* T6 */ + MATRIX_KEY(0x01, 0x04, 0) /* T7 */ + MATRIX_KEY(0x02, 0x09, 0) /* T8 */ + MATRIX_KEY(0x01, 0x09, 0) /* T9 */ + MATRIX_KEY(0x00, 0x04, 0) /* T10 */ + >; + linux,keymap = < + MATRIX_KEY(0x00, 0x02, KEY_BACK) + MATRIX_KEY(0x03, 0x02, KEY_REFRESH) + MATRIX_KEY(0x02, 0x02, KEY_ZOOM) + MATRIX_KEY(0x01, 0x02, KEY_SCALE) + MATRIX_KEY(0x03, 0x04, KEY_SYSRQ) + MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN) + MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP) + MATRIX_KEY(0x02, 0x09, KEY_MUTE) + MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN) + MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP) + + CROS_STD_MAIN_KEYMAP + >; +}; + +&panel { + compatible = "kingdisplay,kd116n21-30nv-a010"; +}; + +&pen_insert { + /* Insert = high, eject = low */ + gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>; +}; + +&pm6150_adc { + 5v-choke-thermistor@4e { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&pm6150_adc_tm { + status = "okay"; + + 5v-choke-thermistor@1 { + reg = <1>; + io-channels = <&pm6150_adc ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&sdhc_2 { + status = "okay"; +}; + +&sound { + model = "sc7180-rt5682-max98357a-2mic"; + pinctrl-names = "default"; + pinctrl-0 = <&dmic_sel>; + dmic-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>; +}; + +&usb_c1 { + status = "disabled"; +}; + +&wifi { + qcom,ath10k-calibration-variant = "GO_POMPOM"; +}; + +/* PINCTRL - board-specific pinctrl */ + +&tlmm { + gpio-line-names = "TP_INT_ODL", + "AP_RAM_ID0", + "AP_SKU_ID2", + "AP_RAM_ID1", + "", + "AP_RAM_ID2", + "AP_TP_I2C_SDA", + "AP_TP_I2C_SCL", + "TS_RESET_L", + "TS_INT_L", + "", + "EDP_BRIJ_IRQ", + "AP_EDP_BKLTEN", + "", + "", + "EDP_BRIJ_I2C_SDA", + "EDP_BRIJ_I2C_SCL", + "HUB_RST_L", + "", + "", + "", + "", + "", + "AMP_EN", + "P_SENSOR_INT_L", + "AP_SAR_SENSOR_SDA", + "AP_SAR_SENSOR_SCL", + "", + "HP_IRQ", + "", + "EN_PP3300_DX_EDP", + "AP_BRD_ID2", + "BRIJ_SUSPEND", + "AP_BRD_ID0", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + "AP_H1_SPI_CLK", + "AP_H1_SPI_CS_L", + "", + "", + "", + "", + "H1_AP_INT_ODL", + "", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "HP_I2C_SDA", + "HP_I2C_SCL", + "FORCED_USB_BOOT", + "AMP_BCLK", + "AMP_LRCLK", + "AMP_DIN", + "PEN_PDCT_L", + "HP_BCLK", + "HP_LRCLK", + "HP_DOUT", + "HP_DIN", + "HP_MCLK", + "AP_SKU_ID0", + "AP_EC_SPI_MISO", + "AP_EC_SPI_MOSI", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "AP_SPI_CLK", + "AP_SPI_MOSI", + "AP_SPI_MISO", + /* + * AP_FLASH_WP_L is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_L. + */ + "AP_FLASH_WP_L", + "", + "AP_SPI_CS0_L", + "SD_CD_ODL", + "", + "", + "", + "", + "", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RST", + "UIM2_PRESENT", + "UIM1_DATA", + "UIM1_CLK", + "UIM1_RST", + "", + "EN_PP3300_CODEC", + "EN_PP3300_HUB", + "", + "DMIC_SEL", + "", + "", + "", + "AP_SKU_ID1", + "AP_RST_REQ", + "", + "AP_BRD_ID1", + "AP_EC_INT_R_L", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "EDP_BRIJ_EN", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "AP_TS_PEN_I2C_SDA", + "AP_TS_PEN_I2C_SCL", + "DP_HOT_PLUG_DET", + "EC_IN_RW_ODL"; + + dmic_sel: dmic-sel { + pinmux { + pins = "gpio86"; + function = "gpio"; + }; + + pinconf { + pins = "gpio86"; + bias-pull-down; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0-lte.dts new file mode 100644 index 000000000..35e8945fc --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0-lte.dts @@ -0,0 +1,38 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Quackingstick board device tree source + * + * Copyright 2021 Google LLC. + * + * SKU: 0x600 => 1536 + * - bits 11..8: Panel ID: 0x6 (AUO) + */ + +#include "sc7180-trogdor-quackingstick-r0.dts" +#include "sc7180-trogdor-lte-sku.dtsi" + +/ { + model = "Google Quackingstick (rev0+) with LTE"; + compatible = "google,quackingstick-sku1536", "qcom,sc7180"; +}; + +&ap_sar_sensor { + compatible = "semtech,sx9324"; + semtech,ph0-pin = <3 1 3>; + semtech,ph1-pin = <2 1 2>; + semtech,ph2-pin = <3 3 1>; + semtech,ph3-pin = <1 3 3>; + semtech,ph01-resolution = <1024>; + semtech,ph23-resolution = <1024>; + semtech,startup-sensor = <1>; + semtech,ph01-proxraw-strength = <3>; + semtech,ph23-proxraw-strength = <3>; + semtech,avg-pos-strength = <256>; + + /delete-property/ svdd-supply; + vdd-supply = <&pp1800_prox>; +}; + +&ap_sar_sensor_i2c { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0.dts new file mode 100644 index 000000000..5c81e44ed --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Quackingstick board device tree source + * + * Copyright 2021 Google LLC. + * + * SKU: 0x601 => 1537 + * - bits 11..8: Panel ID: 0x6 (AUO) + */ + +#include "sc7180-trogdor-quackingstick.dtsi" + +/ { + model = "Google Quackingstick (rev0+)"; + compatible = "google,quackingstick-sku1537", "qcom,sc7180"; +}; + +&dsi_phy { + qcom,phy-rescode-offset-top = /bits/ 8 <(-13) (-13) (-13) (-13) (-13)>; + qcom,phy-rescode-offset-bot = /bits/ 8 <(-13) (-13) (-13) (-13) (-13)>; + qcom,phy-drive-ldo-level = <375>; +}; + +&panel { + compatible = "auo,b101uan08.3"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi new file mode 100644 index 000000000..695b04fe7 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi @@ -0,0 +1,324 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Quackingstick board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" + +/* This board only has 1 USB Type-C port. */ +/delete-node/ &usb_c1; + +/ { + ppvar_lcd: ppvar-lcd { + compatible = "regulator-fixed"; + regulator-name = "ppvar_lcd"; + + gpio = <&tlmm 88 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&ppvar_lcd_en>; + + vin-supply = <&pp5000_a>; + }; + + v1p8_disp: v1p8-disp { + compatible = "regulator-fixed"; + regulator-name = "v1p8_disp"; + + gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&pp1800_disp_on>; + + vin-supply = <&pp3300_a>; + }; +}; + +&backlight { + pwms = <&cros_ec_pwm 0>; +}; + +&camcc { + status = "okay"; +}; + +&cros_ec { + keyboard-controller { + compatible = "google,cros-ec-keyb-switches"; + }; +}; + +&dsi0 { + panel: panel@0 { + /* Compatible will be filled in per-board */ + reg = <0>; + enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_rst>; + avdd-supply = <&ppvar_lcd>; + pp1800-supply = <&v1p8_disp>; + pp3300-supply = <&pp3300_dx_edp>; + backlight = <&backlight>; + rotation = <270>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; + + ports { + port@1 { + endpoint { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&gpio_keys { + status = "okay"; +}; + +&i2c4 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + + post-power-on-delay-ms = <20>; + hid-descr-addr = <0x0001>; + + vdd-supply = <&pp3300_ts>; + }; +}; + +&sdhc_2 { + status = "okay"; +}; + +&pp1800_uf_cam { + status = "okay"; +}; + +&pp1800_wf_cam { + status = "okay"; +}; + +&pp2800_uf_cam { + status = "okay"; +}; + +&pp2800_wf_cam { + status = "okay"; +}; + +/* + * No eDP on this board but it's logically the same signal so just give it + * a new name and assign the proper GPIO. + */ +pp3300_disp_on: &pp3300_dx_edp { + gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>; +}; + +/* PINCTRL - modifications to sc7180-trogdor.dtsi */ + +/* + * No eDP on this board but it's logically the same signal so just give it + * a new name and assign the proper GPIO. + */ + +tp_en: &en_pp3300_dx_edp { + pinmux { + pins = "gpio67"; + }; + + pinconf { + pins = "gpio67"; + }; +}; + +/* PINCTRL - board-specific pinctrl */ + +&tlmm { + gpio-line-names = "HUB_RST_L", + "AP_RAM_ID0", + "AP_SKU_ID2", + "AP_RAM_ID1", + "", + "AP_RAM_ID2", + "UF_CAM_EN", + "WF_CAM_EN", + "TS_RESET_L", + "TS_INT_L", + "", + "", + "AP_EDP_BKLTEN", + "UF_CAM_MCLK", + "WF_CAM_CLK", + "EDP_BRIJ_I2C_SDA", + "EDP_BRIJ_I2C_SCL", + "UF_CAM_SDA", + "UF_CAM_SCL", + "WF_CAM_SDA", + "WF_CAM_SCL", + "", + "", + "AMP_EN", + "P_SENSOR_INT_L", + "AP_SAR_SENSOR_SDA", + "AP_SAR_SENSOR_SCL", + "", + "HP_IRQ", + "WF_CAM_RST_L", + "UF_CAM_RST_L", + "AP_BRD_ID2", + "", + "AP_BRD_ID0", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + "AP_H1_SPI_CLK", + "AP_H1_SPI_CS_L", + "", + "", + "", + "", + "H1_AP_INT_ODL", + "", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "HP_I2C_SDA", + "HP_I2C_SCL", + "FORCED_USB_BOOT", + "", + "", + "AMP_DIN", + "PEN_DET_ODL", + "HP_BCLK", + "HP_LRCLK", + "HP_DOUT", + "HP_DIN", + "HP_MCLK", + "AP_SKU_ID0", + "AP_EC_SPI_MISO", + "AP_EC_SPI_MOSI", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "AP_SPI_CLK", + "AP_SPI_MOSI", + "AP_SPI_MISO", + /* + * AP_FLASH_WP_L is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_L. + */ + "AP_FLASH_WP_L", + "EN_PP3300_DX_EDP", + "AP_SPI_CS0_L", + "SD_CD_ODL", + "", + "", + "", + "", + "", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RST", + "UIM2_PRESENT_L", + "UIM1_DATA", + "UIM1_CLK", + "UIM1_RST", + "", + "CODEC_PWR_EN", + "HUB_EN", + "", + "PP1800_DISP_ON", + "LCD_RST", + "PPVAR_LCD_EN", + "", + "AP_SKU_ID1", + "AP_RST_REQ", + "", + "AP_BRD_ID1", + "AP_EC_INT_L", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "AP_TS_I2C_SDA", + "AP_TS_I2C_SCL", + "DP_HOT_PLUG_DET", + "EC_IN_RW_ODL"; + + lcd_rst: lcd-rst { + pinmux { + pins = "gpio87"; + function = "gpio"; + }; + + pinconf { + pins = "gpio87"; + drive-strength = <2>; + bias-disable; + }; + }; + + ppvar_lcd_en: ppvar-lcd-en { + pinmux { + pins = "gpio88"; + function = "gpio"; + }; + + pinconf { + pins = "gpio88"; + drive-strength = <2>; + bias-disable; + }; + }; + + pp1800_disp_on: pp1800-disp-on { + pinmux { + pins = "gpio86"; + function = "gpio"; + }; + + pinconf { + pins = "gpio86"; + drive-strength = <2>; + bias-disable; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1-lte.dts new file mode 100644 index 000000000..1123c02bd --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1-lte.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Trogdor board device tree source + * + * Copyright 2020 Google LLC. + */ + +#include "sc7180-trogdor-r1.dts" +#include "sc7180-trogdor-lte-sku.dtsi" + +/ { + model = "Google Trogdor (rev1+) with LTE"; + compatible = "google,trogdor-sku0", "qcom,sc7180"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts new file mode 100644 index 000000000..bc097d1b1 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts @@ -0,0 +1,201 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Trogdor board device tree source + * + * Copyright 2020 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" +/* Must come after sc7180-trogdor.dtsi to modify cros_ec */ +#include +#include "sc7180-trogdor-ti-sn65dsi86.dtsi" + +/ { + model = "Google Trogdor (rev1+)"; + compatible = "google,trogdor", "qcom,sc7180"; +}; + +&ap_tp_i2c { + status = "okay"; +}; + +ap_ts_pen_1v8: &i2c4 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@10 { + compatible = "elan,ekth3500"; + reg = <0x10>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + + vcc33-supply = <&pp3300_ts>; + + reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; + }; +}; + +&panel { + compatible = "auo,b116xa01"; +}; + +&sdhc_2 { + status = "okay"; +}; + +&trackpad { + interrupts = <58 IRQ_TYPE_EDGE_FALLING>; +}; + +&usb_hub_2_x { + vdd-supply = <&pp3300_l7c>; +}; + +&usb_hub_3_x { + vdd-supply = <&pp3300_l7c>; +}; + +/* PINCTRL - modifications to sc7180-trogdor.dtsi */ + +&trackpad_int_1v8_odl { + pinmux { + pins = "gpio58"; + }; + + pinconf { + pins = "gpio58"; + }; +}; + +/* PINCTRL - board-specific pinctrl */ + +&tlmm { + gpio-line-names = "ESIM_MISO", + "ESIM_MOSI", + "ESIM_CLK", + "ESIM_CS_L", + "FP_TO_AP_IRQ_L", + "FP_RST_L", + "AP_TP_I2C_SDA", + "AP_TP_I2C_SCL", + "TS_RESET_L", + "TS_INT_L", + "FPMCU_BOOT0", + "EDP_BRIJ_IRQ", + "AP_EDP_BKLTEN", + "", + "", + "EDP_BRIJ_I2C_SDA", + "EDP_BRIJ_I2C_SCL", + "HUB_RST_L", + "PEN_RST_ODL", + "AP_RAM_ID1", + "AP_RAM_ID2", + "PEN_IRQ_L", + "FPMCU_SEL", + "AMP_EN", + "P_SENSOR_INT_L", + "AP_SAR_SENSOR_SDA", + "AP_SAR_SENSOR_SCL", + "", + "HP_IRQ", + "AP_RAM_ID0", + "EN_PP3300_DX_EDP", + "AP_BRD_ID2", + "BRIJ_SUSPEND", + "AP_BRD_ID0", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + "AP_H1_SPI_CLK", + "AP_H1_SPI_CS_L", + "", + "", + "", + "", + "H1_AP_INT_ODL", + "", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "HP_I2C_SDA", + "HP_I2C_SCL", + "FORCED_USB_BOOT", + "", + "", + "AMP_DIN", + "PEN_PDCT_L", + "HP_BCLK", + "HP_LRCLK", + "HP_DOUT", + "HP_DIN", + "HP_MCLK", + "TRACKPAD_INT_1V8_ODL", + "AP_EC_SPI_MISO", + "AP_EC_SPI_MOSI", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "AP_SPI_CLK", + "AP_SPI_MOSI", + "AP_SPI_MISO", + /* + * AP_FLASH_WP_L is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_L. + */ + "AP_FLASH_WP_L", + "DBG_SPI_HOLD_L", + "AP_SPI_CS0_L", + "SD_CD_ODL", + "", + "", + "", + "", + "", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RST", + "UIM2_PRESENT", + "UIM1_DATA", + "UIM1_CLK", + "UIM1_RST", + "", + "EN_PP3300_CODEC", + "EN_PP3300_HUB", + "", + "AP_SPI_FP_MISO", + "AP_SPI_FP_MOSI", + "AP_SPI_FP_CLK", + "AP_SPI_FP_CS_L", + "AP_SKU_ID1", + "AP_RST_REQ", + "", + "AP_BRD_ID1", + "AP_EC_INT_L", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "EDP_BRIJ_EN", + "AP_SKU_ID0", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "AP_TS_PEN_I2C_SDA", + "AP_TS_PEN_I2C_SCL", + "DP_HOT_PLUG_DET", + "EC_IN_RW_ODL"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi new file mode 100644 index 000000000..f869e6a34 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi @@ -0,0 +1,91 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Trogdor dts fragment for the boards with TI sn65dsi86 edp bridge + * + * Copyright 2021 Google LLC. + */ + +#include + +&dsi0_out { + remote-endpoint = <&sn65dsi86_in>; +}; + +edp_brij_i2c: &i2c2 { + status = "okay"; + clock-frequency = <400000>; + + sn65dsi86_bridge: bridge@2d { + compatible = "ti,sn65dsi86"; + reg = <0x2d>; + pinctrl-names = "default"; + pinctrl-0 = <&edp_brij_en>, <&edp_brij_irq>; + gpio-controller; + #gpio-cells = <2>; + + interrupt-parent = <&tlmm>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; + + enable-gpios = <&tlmm 104 GPIO_ACTIVE_HIGH>; + + vpll-supply = <&pp1800_edp_vpll>; + vccio-supply = <&pp1800_brij_vccio>; + vcca-supply = <&pp1200_brij>; + vcc-supply = <&pp1200_brij>; + + clocks = <&rpmhcc RPMH_LN_BB_CLK3>; + clock-names = "refclk"; + + no-hpd; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + sn65dsi86_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + sn65dsi86_out: endpoint { + data-lanes = <0 1>; + remote-endpoint = <&panel_in_edp>; + }; + }; + }; + + aux-bus { + panel: panel { + /* Compatible will be filled in per-board */ + power-supply = <&pp3300_dx_edp>; + backlight = <&backlight>; + hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>; + + port { + panel_in_edp: endpoint { + remote-endpoint = <&sn65dsi86_out>; + }; + }; + }; + }; + }; +}; + +&tlmm { + edp_brij_irq: edp-brij-irq { + pinmux { + pins = "gpio11"; + function = "gpio"; + }; + + pinconf { + pins = "gpio11"; + drive-strength = <2>; + bias-pull-down; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-boe.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-boe.dts new file mode 100644 index 000000000..d6ed7d0af --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-boe.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Wormdingler board device tree source + * + * Copyright 2021 Google LLC. + * + * SKU: 0x10 => 16 + * - bits 7..4: Panel ID: 0x1 (BOE) + */ + +/dts-v1/; + +#include "sc7180-trogdor-wormdingler-rev0.dtsi" + +/ { + model = "Google Wormdingler rev0 BOE panel board"; + compatible = "google,wormdingler-rev0-sku16", "qcom,sc7180"; +}; + +&panel { + compatible = "boe,tv110c9m-ll3"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-inx.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-inx.dts new file mode 100644 index 000000000..c03525ea6 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-inx.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Wormdingler board device tree source + * + * Copyright 2021 Google LLC. + * + * SKU: 0x0 => 0 + * - bits 7..4: Panel ID: 0x0 (INX) + */ + +/dts-v1/; + +#include "sc7180-trogdor-wormdingler-rev0.dtsi" + +/ { + model = "Google Wormdingler rev0 INX panel board"; + compatible = "google,wormdingler-rev0-sku0", "qcom,sc7180"; +}; + +&panel { + compatible = "innolux,hj110iz-01a"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0.dtsi new file mode 100644 index 000000000..db29e0cba --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0.dtsi @@ -0,0 +1,53 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Wormdingler board device tree source + * + * Copyright 2021 Google LLC. + * + */ + +/dts-v1/; + +#include "sc7180-trogdor-wormdingler.dtsi" + +&avdd_lcd { + gpio = <&tlmm 80 GPIO_ACTIVE_HIGH>; +}; + +&panel { + enable-gpios = <&tlmm 76 GPIO_ACTIVE_HIGH>; +}; + +&v1p8_mipi { + gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>; +}; + +/* PINCTRL - modifications to sc7180-trogdor-wormdingler.dtsi */ +&avdd_lcd_en { + pinmux { + pins = "gpio80"; + }; + + pinconf { + pins = "gpio80"; + }; +}; + +&mipi_1800_en { + pinmux { + pins = "gpio81"; + }; + + pinconf { + pins = "gpio81"; + }; +}; +&vdd_reset_1800 { + pinmux { + pins = "gpio76"; + }; + + pinconf { + pins = "gpio76"; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dts new file mode 100644 index 000000000..aa605885c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Wormdingler board device tree source + * + * Copyright 2021 Google LLC. + * + * SKU: 0x401 => 1025 + * - bits 11..8: Panel ID: 0x4 (BOE) + */ + +/dts-v1/; + +#include "sc7180-trogdor-wormdingler-rev1-boe.dts" + +/ { + model = "Google Wormdingler rev1+ (BOE, rt5682s)"; + compatible = "google,wormdingler-sku1025", "qcom,sc7180"; +}; + +&alc5682 { + compatible = "realtek,rt5682s"; + realtek,dmic1-clk-pin = <2>; + realtek,dmic-clk-rate-hz = <2048000>; +}; + +&sound { + compatible = "google,sc7180-trogdor"; + model = "sc7180-rt5682s-max98357a-1mic"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe.dts new file mode 100644 index 000000000..c5b0658bd --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe.dts @@ -0,0 +1,28 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Wormdingler board device tree source + * + * Copyright 2021 Google LLC. + * + * SKU: 0x400 => 1024 + * - bits 11..8: Panel ID: 0x4 (BOE) + */ + +/dts-v1/; + +#include "sc7180-trogdor-wormdingler.dtsi" + +/ { + model = "Google Wormdingler rev1+ BOE panel board"; + compatible = "google,wormdingler-sku1024", "qcom,sc7180"; +}; + +&dsi_phy { + qcom,phy-rescode-offset-top = /bits/ 8 <31 31 31 31 (-32)>; + qcom,phy-rescode-offset-bot = /bits/ 8 <31 31 31 31 (-32)>; + qcom,phy-drive-ldo-level = <450>; +}; + +&panel { + compatible = "boe,tv110c9m-ll3"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dts new file mode 100644 index 000000000..7116c44c8 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Wormdingler board device tree source + * + * Copyright 2021 Google LLC. + * + * SKU: 0x0001 => 1 + * - bits 11..8: Panel ID: 0x0 (INX) + */ + +/dts-v1/; + +#include "sc7180-trogdor-wormdingler-rev1-inx.dts" + +/ { + model = "Google Wormdingler rev1+ (INX, rt5682s)"; + compatible = "google,wormdingler-sku1", "qcom,sc7180"; +}; + +&alc5682 { + compatible = "realtek,rt5682s"; + realtek,dmic1-clk-pin = <2>; + realtek,dmic-clk-rate-hz = <2048000>; +}; + +&sound { + compatible = "google,sc7180-trogdor"; + model = "sc7180-rt5682s-max98357a-1mic"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx.dts new file mode 100644 index 000000000..dd34a2297 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Wormdingler board device tree source + * + * Copyright 2021 Google LLC. + * + * SKU: 0x0000 => 0 + * - bits 11..8: Panel ID: 0x0 (INX) + */ + +/dts-v1/; + +#include "sc7180-trogdor-wormdingler.dtsi" + +/ { + model = "Google Wormdingler rev1+ INX panel board"; + compatible = "google,wormdingler-sku0", "qcom,sc7180"; +}; + +&panel { + compatible = "innolux,hj110iz-01a"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi new file mode 100644 index 000000000..6312108e8 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi @@ -0,0 +1,412 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Wormdingler board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" + +/ { + avdd_lcd: avdd-lcd { + compatible = "regulator-fixed"; + regulator-name = "avdd_lcd"; + + gpio = <&tlmm 88 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&avdd_lcd_en>; + + vin-supply = <&pp5000_a>; + }; + + avee_lcd: avee-lcd { + compatible = "regulator-fixed"; + regulator-name = "avee_lcd"; + + gpio = <&tlmm 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&avee_lcd_en>; + + vin-supply = <&pp5000_a>; + }; + + pp1800_ts: + v1p8_mipi: v1p8-mipi { + compatible = "regulator-fixed"; + regulator-name = "v1p8_mipi"; + + gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&mipi_1800_en>; + + vin-supply = <&pp3300_a>; + }; + + thermal-zones { + skin_temp_thermal: skin-temp-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&pm6150_adc_tm 1>; + sustainable-power = <574>; + + trips { + skin_temp_alert0: trip-point0 { + temperature = <58000>; + hysteresis = <1000>; + type = "passive"; + }; + + skin_temp_alert1: trip-point1 { + temperature = <62500>; + hysteresis = <1000>; + type = "passive"; + }; + + skin-temp-crit { + temperature = <68000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&skin_temp_alert0>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + + map1 { + trip = <&skin_temp_alert1>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; +}; + +&backlight { + pwms = <&cros_ec_pwm 0>; +}; + +&camcc { + status = "okay"; +}; + +&cros_ec { + base_detection: cbas { + compatible = "google,cros-cbas"; + }; + + keyboard-controller { + compatible = "google,cros-ec-keyb-switches"; + }; +}; + +&dsi0 { + + panel: panel@0 { + reg = <0>; + enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vdd_reset_1800>; + avdd-supply = <&avdd_lcd>; + avee-supply = <&avee_lcd>; + pp1800-supply = <&v1p8_mipi>; + pp3300-supply = <&pp3300_dx_edp>; + backlight = <&backlight>; + rotation = <270>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; + + ports { + port@1 { + endpoint { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&i2c4 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@1 { + compatible = "hid-over-i2c"; + reg = <0x01>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_l>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + + post-power-on-delay-ms = <70>; + hid-descr-addr = <0x0001>; + + vdd-supply = <&pp3300_ts>; + vddl-supply = <&pp1800_ts>; + }; +}; + +&pm6150_adc { + skin-temp-thermistor@4d { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&pm6150_adc_tm { + status = "okay"; + + skin-temp-thermistor@1 { + reg = <1>; + io-channels = <&pm6150_adc ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pp1800_uf_cam { + status = "okay"; +}; + +&pp1800_wf_cam { + status = "okay"; +}; + +&pp2800_uf_cam { + status = "okay"; +}; + +&pp2800_wf_cam { + status = "okay"; +}; + +&wifi { + qcom,ath10k-calibration-variant = "GO_WORMDINGLER"; +}; + +/* + * No eDP on this board but it's logically the same signal so just give it + * a new name and assign the proper GPIO. + */ +pp3300_disp_on: &pp3300_dx_edp { + gpio = <&tlmm 85 GPIO_ACTIVE_HIGH>; +}; + +/* PINCTRL - modifications to sc7180-trogdor.dtsi */ + +/* + * No eDP on this board but it's logically the same signal so just give it + * a new name and assign the proper GPIO. + */ + +tp_en: &en_pp3300_dx_edp { + pinmux { + pins = "gpio85"; + }; + + pinconf { + pins = "gpio85"; + }; +}; + +/* PINCTRL - board-specific pinctrl */ + +&tlmm { + gpio-line-names = "HUB_RST_L", + "AP_RAM_ID0", + "AP_SKU_ID2", + "AP_RAM_ID1", + "", + "AP_RAM_ID2", + "UF_CAM_EN", + "WF_CAM_EN", + "TS_RESET_L", + "TS_INT_L", + "", + "", + "AP_EDP_BKLTEN", + "UF_CAM_MCLK", + "WF_CAM_CLK", + "", + "", + "UF_CAM_SDA", + "UF_CAM_SCL", + "WF_CAM_SDA", + "WF_CAM_SCL", + "AVEE_LCD_EN", + "", + "AMP_EN", + "", + "", + "", + "", + "HP_IRQ", + "WF_CAM_RST_L", + "UF_CAM_RST_L", + "AP_BRD_ID2", + "", + "AP_BRD_ID0", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + "AP_H1_SPI_CLK", + "AP_H1_SPI_CS_L", + "BT_UART_CTS", + "BT_UART_RTS", + "BT_UART_TXD", + "BT_UART_RXD", + "H1_AP_INT_ODL", + "", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "HP_I2C_SDA", + "HP_I2C_SCL", + "FORCED_USB_BOOT", + "AMP_BCLK", + "AMP_LRCLK", + "AMP_DIN", + "", + "HP_BCLK", + "HP_LRCLK", + "HP_DOUT", + "HP_DIN", + "HP_MCLK", + "AP_SKU_ID0", + "AP_EC_SPI_MISO", + "AP_EC_SPI_MOSI", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "AP_SPI_CLK", + "AP_SPI_MOSI", + "AP_SPI_MISO", + /* + * AP_FLASH_WP_L is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_L. + */ + "AP_FLASH_WP_L", + "", + "AP_SPI_CS0_L", + "", + "", + "", + "", + "WLAN_SW_CTRL", + "", + "REPORT_E", + "", + "ID0", + "", + "ID1", + "", + "", + "", + "CODEC_PWR_EN", + "HUB_EN", + "TP_EN", + "MIPI_1.8V_EN", + "VDD_RESET_1.8V", + "AVDD_LCD_EN", + "", + "AP_SKU_ID1", + "AP_RST_REQ", + "", + "AP_BRD_ID1", + "AP_EC_INT_L", + "SDM_GRFC_3", + "", + "", + "BOOT_CONFIG_4", + "BOOT_CONFIG_2", + "", + "", + "", + "", + "", + "", + "", + "BOOT_CONFIG_3", + "WCI2_LTE_COEX_TXD", + "WCI2_LTE_COEX_RXD", + "", + "", + "", + "", + "FORCED_USB_BOOT_POL", + "AP_TS_PEN_I2C_SDA", + "AP_TS_PEN_I2C_SCL", + "DP_HOT_PLUG_DET", + "EC_IN_RW_ODL"; + + avdd_lcd_en: avdd-lcd-en { + pinmux { + pins = "gpio88"; + function = "gpio"; + }; + + pinconf { + pins = "gpio88"; + drive-strength = <2>; + bias-disable; + }; + }; + + avee_lcd_en: avee-lcd-en { + pinmux { + pins = "gpio21"; + function = "gpio"; + }; + + pinconf { + pins = "gpio21"; + drive-strength = <2>; + bias-disable; + }; + }; + + mipi_1800_en: mipi-1800-en { + pinmux { + pins = "gpio86"; + function = "gpio"; + }; + + pinconf { + pins = "gpio86"; + drive-strength = <2>; + bias-disable; + }; + }; + + vdd_reset_1800: vdd-reset-1800 { + pinmux { + pins = "gpio87"; + function = "gpio"; + }; + + pinconf { + pins = "gpio87"; + drive-strength = <2>; + bias-disable; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi new file mode 100644 index 000000000..eae22e6e9 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi @@ -0,0 +1,1663 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Trogdor device tree source (common between revisions) + * + * Copyright 2019 Google LLC. + */ + +#include +#include +#include +#include +#include +#include + +#include "sc7180.dtsi" +/* PMICs depend on spmi_bus label and so must come after sc7180.dtsi */ +#include "pm6150.dtsi" +#include "pm6150l.dtsi" + +/ { + thermal-zones { + charger_thermal: charger-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&pm6150_adc_tm 0>; + + trips { + charger-crit { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + }; +}; + +/* + * Reserved memory changes + * + * Delete all unused memory nodes and define the peripheral memory regions + * required by the board dts. + */ + +/delete-node/ &hyp_mem; +/delete-node/ &ipa_fw_mem; +/delete-node/ &xbl_mem; +/delete-node/ &aop_mem; +/delete-node/ &sec_apps_mem; +/delete-node/ &tz_mem; + +/* Increase the size from 2MB to 8MB */ +&rmtfs_mem { + reg = <0x0 0x94600000 0x0 0x800000>; +}; + +/ { + reserved-memory { + atf_mem: memory@80b00000 { + reg = <0x0 0x80b00000 0x0 0x100000>; + no-map; + }; + + mpss_mem: memory@86000000 { + reg = <0x0 0x86000000 0x0 0x2000000>; + no-map; + }; + + venus_mem: memory@8f600000 { + reg = <0 0x8f600000 0 0x500000>; + no-map; + }; + + wlan_mem: memory@94100000 { + reg = <0x0 0x94100000 0x0 0x200000>; + no-map; + }; + + mba_mem: memory@94400000 { + reg = <0x0 0x94400000 0x0 0x200000>; + no-map; + }; + }; + + aliases { + bluetooth0 = &bluetooth; + hsuart0 = &uart3; + serial0 = &uart8; + wifi0 = &wifi; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + /* FIXED REGULATORS - parents above children */ + + /* This is the top level supply and variable voltage */ + ppvar_sys: ppvar-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "ppvar_sys"; + regulator-always-on; + regulator-boot-on; + }; + + /* This divides ppvar_sys by 2, so voltage is variable */ + src_vph_pwr: src-vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "src_vph_pwr"; + + /* EC turns on with switchcap_on; always on for AP */ + regulator-always-on; + regulator-boot-on; + + vin-supply = <&ppvar_sys>; + }; + + pp5000_a: pp5000-a-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp5000_a"; + + /* EC turns on with en_pp5000_a; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + vin-supply = <&ppvar_sys>; + }; + + pp3300_a: pp3300-a-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp3300_a"; + + /* EC turns on with en_pp3300_a; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + /* + * Actually should be pp3300 but that's practically an alias for + * pp3300_a so we use pp3300's vin-supply here to avoid one more + * node. + */ + vin-supply = <&ppvar_sys>; + }; + + pp1800_ec: + pp1800_sensors: + pp1800_ldo: pp1800-ldo-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp1800_ldo"; + + /* EC turns on with hibernate_l; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + /* + * Actually should be pp1800_h1 but we don't have any need to + * model that so we use the parent of pp1800_h1. + */ + vin-supply = <&pp3300_a>; + }; + + pp1800_uf_cam: pp1800-uf-cam-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp1800_uf_cam"; + status = "disabled"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&uf_cam_en>; + + vin-supply = <&pp1800_ldo>; + regulator-enable-ramp-delay = <1000>; + }; + + pp1800_wf_cam: pp1800-wf-cam-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp1800_wf_cam"; + status = "disabled"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&wf_cam_en>; + + vin-supply = <&pp1800_ldo>; + regulator-enable-ramp-delay = <1000>; + }; + + pp2800_uf_cam: pp2800-uf-cam-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp2800_uf_cam"; + status = "disabled"; + + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + + gpio = <&tlmm 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + /* + * The pinconf can only be referenced once so we put it on the + * first regulator and comment it out here. + * pinctrl-names = "default"; + * pinctrl-0 = <&uf_cam_en>; + */ + + vin-supply = <&pp3300_a>; + }; + + pp2800_vcm_wf_cam: + pp2800_wf_cam: pp2800-wf-cam-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp2800_wf_cam"; + status = "disabled"; + + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + + gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + /* + * The pinconf can only be referenced once so we put it on the + * first regulator and comment it out here. + * pinctrl-names = "default"; + * pinctrl-0 = <&wf_cam_en>; + */ + + vin-supply = <&pp3300_a>; + }; + + pp3300_audio: + pp3300_codec: pp3300-codec-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp3300_codec"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 83 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&en_pp3300_codec>; + + vin-supply = <&pp3300_a>; + }; + + pp3300_dx_edp: + pp3300_ts: pp3300-dx-edp-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp3300_dx_edp"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 30 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&en_pp3300_dx_edp>; + + vin-supply = <&pp3300_a>; + }; + + pp3300_fp_tp: pp3300-fp-tp-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp3300_fp_tp"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + /* AP turns on with PP1800_VIO_OUT; always on for AP */ + regulator-always-on; + regulator-boot-on; + + vin-supply = <&pp3300_a>; + }; + + pp3300_hub: pp3300-hub-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp3300_hub"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 84 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&en_pp3300_hub>; + + /* The BIOS leaves this regulator on */ + regulator-boot-on; + + vin-supply = <&pp3300_a>; + }; + + /* BOARD-SPECIFIC TOP LEVEL NODES */ + + backlight: backlight { + compatible = "pwm-backlight"; + + /* The panels don't seem to like anything below ~ 5% */ + brightness-levels = < + 196 256 324 400 484 576 676 784 900 1024 1156 1296 + 1444 1600 1764 1936 2116 2304 2500 2704 2916 3136 + 3364 3600 3844 4096 + >; + num-interpolated-steps = <64>; + default-brightness-level = <951>; + + pwms = <&cros_ec_pwm 1>; + enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; + power-supply = <&ppvar_sys>; + pinctrl-names = "default"; + pinctrl-0 = <&ap_edp_bklten>; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&pen_pdct_l>; + + pen_insert: switch-pen-insert { + label = "Pen Insert"; + + /* Insert = low, eject = high */ + gpios = <&tlmm 52 GPIO_ACTIVE_LOW>; + linux,code = ; + linux,input-type = ; + wakeup-event-action = ; + wakeup-source; + }; + }; + + max98360a: audio-codec-0 { + compatible = "maxim,max98360a"; + pinctrl-names = "default"; + pinctrl-0 = <&_en>; + sdmode-gpios = <&tlmm 23 GPIO_ACTIVE_HIGH>; + #sound-dai-cells = <0>; + }; + + pwmleds { + compatible = "pwm-leds"; + keyboard_backlight: keyboard-backlight { + status = "disabled"; + label = "cros_ec::kbd_backlight"; + function = LED_FUNCTION_KBD_BACKLIGHT; + pwms = <&cros_ec_pwm 0>; + max-brightness = <1023>; + }; + }; + + sound: sound { + compatible = "google,sc7180-trogdor"; + model = "sc7180-rt5682-max98357a-1mic"; + + audio-routing = + "Headphone Jack", "HPOL", + "Headphone Jack", "HPOR"; + + #address-cells = <1>; + #size-cells = <0>; + + dai-link@0 { + link-name = "MultiMedia0"; + reg = ; + cpu { + sound-dai = <&lpass_cpu MI2S_PRIMARY>; + }; + + sound_multimedia0_codec: codec { + sound-dai = <&alc5682 0 /* aif1 */>; + }; + }; + + dai-link@1 { + link-name = "MultiMedia1"; + reg = ; + cpu { + sound-dai = <&lpass_cpu MI2S_SECONDARY>; + }; + + sound_multimedia1_codec: codec { + sound-dai = <&max98360a>; + }; + }; + + dai-link@5 { + link-name = "MultiMedia2"; + reg = ; + cpu { + sound-dai = <&lpass_cpu LPASS_DP_RX>; + }; + + codec { + sound-dai = <&mdss_dp>; + }; + }; + }; +}; + +&qfprom { + vcc-supply = <&pp1800_l11a>; +}; + +&qspi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data01>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + + spi-max-frequency = <37500000>; + spi-tx-bus-width = <2>; + spi-rx-bus-width = <2>; + }; +}; + +&apps_rsc { + pm6150-rpmh-regulators { + compatible = "qcom,pm6150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vddpx_1: + vdd2: + pp1125_s1a: smps1 { + regulator-min-microvolt = <1128000>; + regulator-max-microvolt = <1128000>; + }; + + vdd_qlink_lv: + vdd_qlink_lv_ck: + vdd_qusb_hs0_core: + vdd_ufs1_core: + vdda_mipi_csi0_0p9: + vdda_mipi_csi1_0p9: + vdda_mipi_csi2_0p9: + vdda_mipi_csi3_0p9: + vdda_mipi_dsi0_pll: + vdda_pll_cc_ebi01: + vdda_qrefs_0p9: + vdda_usb_ss_dp_core: + pp900_l4a: ldo4 { + regulator-min-microvolt = <824000>; + regulator-max-microvolt = <928000>; + regulator-initial-mode = ; + }; + + vdd_cx_wlan: + pp800_l9a: ldo9 { + regulator-min-microvolt = <488000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = ; + }; + + vdd1: + vddpx_3: + vddpx_7: + vio_in: + pp1800_l10a: ldo10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vdd_qfprom: + vdda_apc1_cs_1p8: + vdda_qrefs_1p8: + vdda_qusb_hs0_1p8: + vddpx_11: + vreg_bb_clk: + pp1800_l11a: ldo11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + mcp_vccq: + pp1800_l12a_r: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + /* + * On trogdor this needs to match l10a since we use it to + * give power to things like SPI flash which communicate back + * on lines powered by l10a. Thus we force to 1.8V. + */ + pp1800_l13a: ldo13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + pp1800_prox: + pp1800_l14a: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + pp1800_alc5682: + pp1800_l15a: ldo15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vdda_qusb_hs0_3p1: + vdd_pdphy: + pp3100_l17a: ldo17 { + regulator-min-microvolt = <2920000>; + regulator-max-microvolt = <3232000>; + regulator-initial-mode = ; + }; + + pp1800_pen: + pp1800_l18a: ldo18 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + mcp_vcc: + pp2850_l19a: ldo19 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + }; + + pm6150l-rpmh-regulators { + compatible = "qcom,pm6150l-rpmh-regulators"; + qcom,pmic-id = "c"; + + pp1300_s8c: smps8 { + regulator-min-microvolt = <1120000>; + regulator-max-microvolt = <1408000>; + }; + + pp1800_l1c: ldo1 { + regulator-min-microvolt = <1616000>; + regulator-max-microvolt = <1984000>; + regulator-initial-mode = ; + }; + + vdd_wcss_adc_dac: + pp1300_l2c: ldo2 { + regulator-min-microvolt = <1168000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = ; + }; + + pp1200_brij: + vdd_ufs1_1p2: + vdda_csi0_1p25: + vdda_csi1_1p25: + vdda_csi2_1p25: + vdda_csi3_1p25: + vdda_hv_ebi0: + vdda_mipi_dsi0_1p2: + vdda_usb_ss_dp_1p2: + vddpx_10: + pp1200_l3c: ldo3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vddpx_2: + ppvar_l6c: ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2952000>; + regulator-initial-mode = ; + }; + + pp3300_l7c: ldo7 { + regulator-min-microvolt = <3304000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = ; + }; + + pp1800_brij_vccio: + pp1800_edp_vpll: + pp1800_l8c: ldo8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + pp2950_l9c: ldo9 { + regulator-min-microvolt = <2952000>; + regulator-max-microvolt = <2952000>; + regulator-initial-mode = ; + }; + + pp3300_l10c: ldo10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3400000>; + regulator-initial-mode = ; + }; + + pp3300_l11c: ldo11 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3400000>; + regulator-initial-mode = ; + }; + + src_vreg_bob: bob { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = ; + }; + }; +}; + +ap_ec_spi: &spi6 { + status = "okay"; + cros_ec: ec@0 { + compatible = "google,cros-ec-spi"; + reg = <0>; + interrupt-parent = <&tlmm>; + interrupts = <94 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ap_ec_int_l>; + spi-max-frequency = <3000000>; + + cros_ec_pwm: pwm { + compatible = "google,cros-ec-pwm"; + #pwm-cells = <1>; + }; + + i2c_tunnel: i2c-tunnel { + compatible = "google,cros-ec-i2c-tunnel"; + google,remote-bus = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + typec { + compatible = "google,cros-ec-typec"; + #address-cells = <1>; + #size-cells = <0>; + + usb_c0: connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + label = "left"; + power-role = "dual"; + data-role = "host"; + try-power-role = "source"; + }; + + usb_c1: connector@1 { + compatible = "usb-c-connector"; + reg = <1>; + label = "right"; + power-role = "dual"; + data-role = "host"; + try-power-role = "source"; + }; + }; + }; +}; + +ap_h1_spi: &spi0 { + status = "okay"; + cr50: tpm@0 { + compatible = "google,cr50"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&h1_ap_int_odl>; + spi-max-frequency = <800000>; + interrupt-parent = <&tlmm>; + interrupts = <42 IRQ_TYPE_EDGE_RISING>; + }; +}; + +&camcc { + status = "disabled"; +}; + +&dsi0 { + status = "okay"; + vdda-supply = <&vdda_mipi_dsi0_1p2>; +}; + +&dsi0_out { + data-lanes = <0 1 2 3>; +}; + +&dsi_phy { + status = "okay"; + vdds-supply = <&vdda_mipi_dsi0_pll>; +}; + +ap_sar_sensor_i2c: &i2c5 { + clock-frequency = <400000>; + + ap_sar_sensor: proximity@28 { + compatible = "semtech,sx9310"; + reg = <0x28>; + #io-channel-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&p_sensor_int_l>; + + interrupt-parent = <&tlmm>; + interrupts = <24 IRQ_TYPE_LEVEL_LOW>; + + vdd-supply = <&pp3300_a>; + svdd-supply = <&pp1800_prox>; + + label = "proximity-wifi"; + }; +}; + +ap_tp_i2c: &i2c7 { + clock-frequency = <400000>; + + trackpad: trackpad@15 { + compatible = "elan,ekth3000"; + reg = <0x15>; + pinctrl-names = "default"; + pinctrl-0 = <&tp_int_odl>; + + interrupt-parent = <&tlmm>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + + vcc-supply = <&pp3300_fp_tp>; + + wakeup-source; + }; +}; + +hp_i2c: &i2c9 { + status = "okay"; + clock-frequency = <400000>; + + alc5682: codec@1a { + compatible = "realtek,rt5682i"; + reg = <0x1a>; + pinctrl-names = "default"; + pinctrl-0 = <&hp_irq>; + + #sound-dai-cells = <1>; + + interrupt-parent = <&tlmm>; + /* + * This will get ignored because the interrupt type + * is set in rt5682.c. + */ + interrupts = <28 IRQ_TYPE_EDGE_BOTH>; + + AVDD-supply = <&pp1800_alc5682>; + MICVDD-supply = <&pp3300_codec>; + VBAT-supply = <&pp3300_audio>; + + realtek,dmic1-data-pin = <1>; + realtek,dmic1-clk-pin = <1>; + realtek,jd-src = <1>; + }; +}; + +&lpass_cpu { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&sec_mi2s_active>, <&pri_mi2s_active>, <&pri_mi2s_mclk_active>; + + #address-cells = <1>; + #size-cells = <0>; + + mi2s@0 { + reg = ; + qcom,playback-sd-lines = <1>; + qcom,capture-sd-lines = <0>; + }; + + secondary_mi2s: mi2s@1 { + reg = ; + qcom,playback-sd-lines = <0>; + }; + + hdmi@5 { + reg = ; + }; +}; + +&mdp { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dp { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dp_hot_plug_det>; + data-lanes = <0 1>; +}; + +&pm6150_adc { + charger-thermistor@4f { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&pm6150_adc_tm { + status = "okay"; + + charger-thermistor@0 { + reg = <0>; + io-channels = <&pm6150_adc ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pm6150_pon { + status = "disabled"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&remoteproc_mpss { + status = "okay"; + compatible = "qcom,sc7180-mss-pil"; + iommus = <&apps_smmu 0x461 0x0>, <&apps_smmu 0x444 0x3>; + memory-region = <&mba_mem &mpss_mem>; + + /* This gets overridden for SKUs with LTE support. */ + firmware-name = "qcom/sc7180-trogdor/modem-nolte/mba.mbn", + "qcom/sc7180-trogdor/modem-nolte/qdsp6sw.mbn"; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; + vmmc-supply = <&mcp_vcc>; + vqmmc-supply = <&mcp_vccq>; +}; + +&sdhc_2 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; + vmmc-supply = <&pp2950_l9c>; + vqmmc-supply = <&ppvar_l6c>; + + cd-gpios = <&tlmm 69 GPIO_ACTIVE_LOW>; +}; + +&spi0 { + pinctrl-0 = <&qup_spi0_cs_gpio_init_high>, <&qup_spi0_cs_gpio>; + cs-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>; +}; + +&spi6 { + pinctrl-0 = <&qup_spi6_cs_gpio_init_high>, <&qup_spi6_cs_gpio>; + cs-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; +}; + +ap_spi_fp: &spi10 { + pinctrl-0 = <&qup_spi10_cs_gpio_init_high>, <&qup_spi10_cs_gpio>; + cs-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>; + + cros_ec_fp: ec@0 { + compatible = "google,cros-ec-spi"; + reg = <0>; + interrupt-parent = <&tlmm>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&fp_to_ap_irq_l>; + spi-max-frequency = <3000000>; + }; +}; + +#include + +&uart3 { + status = "okay"; + + /delete-property/interrupts; + interrupts-extended = <&intc GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>, + <&tlmm 41 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default", "sleep"; + pinctrl-1 = <&qup_uart3_sleep>; + + bluetooth: bluetooth { + compatible = "qcom,wcn3991-bt"; + vddio-supply = <&pp1800_l10a>; + vddxo-supply = <&pp1800_l1c>; + vddrf-supply = <&pp1300_l2c>; + vddch0-supply = <&pp3300_l10c>; + max-speed = <3200000>; + }; +}; + +&uart8 { + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "host"; + #address-cells = <1>; + #size-cells = <0>; + + /* 2.x hub on port 1 */ + usb_hub_2_x: hub@1 { + compatible = "usbbda,5411"; + reg = <1>; + vdd-supply = <&pp3300_hub>; + peer-hub = <&usb_hub_3_x>; + }; + + /* 3.x hub on port 2 */ + usb_hub_3_x: hub@2 { + compatible = "usbbda,411"; + reg = <2>; + vdd-supply = <&pp3300_hub>; + peer-hub = <&usb_hub_2_x>; + }; +}; + +&usb_1_hsphy { + status = "okay"; + vdd-supply = <&vdd_qusb_hs0_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + qcom,imp-res-offset-value = <8>; + qcom,preemphasis-level = ; + qcom,preemphasis-width = ; + qcom,bias-ctrl-value = <0x22>; + qcom,charge-ctrl-value = <3>; + qcom,hsdisc-trim-value = <0>; +}; + +&usb_1_qmpphy { + status = "okay"; + vdda-phy-supply = <&vdda_usb_ss_dp_1p2>; + vdda-pll-supply = <&vdda_usb_ss_dp_core>; +}; + +&venus { + video-firmware { + iommus = <&apps_smmu 0x0c42 0x0>; + }; +}; + +&wifi { + status = "okay"; + vdd-0.8-cx-mx-supply = <&vdd_cx_wlan>; + vdd-1.8-xo-supply = <&pp1800_l1c>; + vdd-1.3-rfa-supply = <&pp1300_l2c>; + vdd-3.3-ch0-supply = <&pp3300_l10c>; + vdd-3.3-ch1-supply = <&pp3300_l11c>; + + wifi-firmware { + iommus = <&apps_smmu 0xc2 0x1>; + }; +}; + +/* PINCTRL - additions to nodes defined in sc7180.dtsi */ + +&dp_hot_plug_det { + pinconf { + pins = "gpio117"; + bias-disable; + }; +}; + +&pri_mi2s_active { + pinconf { + pins = "gpio53", "gpio54", "gpio55", "gpio56"; + drive-strength = <2>; + bias-pull-down; + }; +}; + +&pri_mi2s_mclk_active { + pinconf { + pins = "gpio57"; + drive-strength = <2>; + bias-pull-down; + }; +}; + +&qspi_cs0 { + pinconf { + pins = "gpio68"; + bias-disable; + }; +}; + +&qspi_clk { + pinconf { + pins = "gpio63"; + drive-strength = <8>; + bias-disable; + }; +}; + +&qspi_data01 { + pinconf { + pins = "gpio64", "gpio65"; + + /* High-Z when no transfers; nice to park the lines */ + bias-pull-up; + }; +}; + +&qup_i2c2_default { + pinconf { + pins = "gpio15", "gpio16"; + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; + }; +}; + +&qup_i2c4_default { + pinconf { + pins = "gpio115", "gpio116"; + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; + }; +}; + +&qup_i2c5_default { + pinconf { + pins = "gpio25", "gpio26"; + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; + }; +}; + +&qup_i2c7_default { + pinconf { + pins = "gpio6", "gpio7"; + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; + }; +}; + +&qup_i2c9_default { + pinconf { + pins = "gpio46", "gpio47"; + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; + }; +}; + +&qup_spi0_cs_gpio { + pinconf { + pins = "gpio34", "gpio35", "gpio36", "gpio37"; + drive-strength = <2>; + bias-disable; + }; +}; + +&qup_spi6_cs_gpio { + pinconf { + pins = "gpio59", "gpio60", "gpio61", "gpio62"; + drive-strength = <2>; + bias-disable; + }; +}; + +&qup_spi10_cs_gpio { + pinconf { + pins = "gpio86", "gpio87", "gpio88", "gpio89"; + drive-strength = <2>; + bias-disable; + }; +}; + +&qup_uart3_default { + pinconf-cts { + /* + * Configure a pull-down on CTS to match the pull of + * the Bluetooth module. + */ + pins = "gpio38"; + bias-pull-down; + }; + + pinconf-rts-tx { + /* We'll drive RTS and TX, so no pull */ + pins = "gpio39", "gpio40"; + drive-strength = <2>; + bias-disable; + }; + + pinconf-rx { + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module is + * in tri-state (module powered off or not driving the + * signal yet). + */ + pins = "gpio41"; + bias-pull-up; + }; +}; + +&qup_uart8_default { + pinconf-tx { + pins = "gpio44"; + drive-strength = <2>; + bias-disable; + }; + + pinconf-rx { + pins = "gpio45"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +&sec_mi2s_active { + pinconf { + pins = "gpio49", "gpio50", "gpio51"; + drive-strength = <2>; + bias-pull-down; + }; +}; + +/* PINCTRL - board-specific pinctrl */ + +&pm6150_gpio { + status = "disabled"; /* No GPIOs are connected */ +}; + +&pm6150l_gpio { + gpio-line-names = "AP_SUSPEND", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + ""; +}; + +&tlmm { + /* + * pinctrl settings for pins that have no real owners. + */ + pinctrl-names = "default"; + pinctrl-0 = <&bios_flash_wp_l>, <&ap_suspend_l_neuter>; + + amp_en: amp-en { + pinmux { + pins = "gpio23"; + function = "gpio"; + }; + + pinconf { + pins = "gpio23"; + bias-pull-down; + }; + }; + + ap_ec_int_l: ap-ec-int-l { + pinmux { + pins = "gpio94"; + function = "gpio"; + input-enable; + }; + + pinconf { + pins = "gpio94"; + bias-pull-up; + }; + }; + + ap_edp_bklten: ap-edp-bklten { + pinmux { + pins = "gpio12"; + function = "gpio"; + }; + + pinconf { + pins = "gpio12"; + drive-strength = <2>; + bias-disable; + + /* Force backlight to be disabled to match state at boot. */ + output-low; + }; + }; + + ap_suspend_l_neuter: ap-suspend-l-neuter { + pinmux { + pins = "gpio27"; + function = "gpio"; + }; + + pinconf { + pins = "gpio27"; + bias-disable; + }; + }; + + bios_flash_wp_l: bios-flash-wp-l { + pinmux { + pins = "gpio66"; + function = "gpio"; + input-enable; + }; + + pinconf { + pins = "gpio66"; + bias-disable; + }; + }; + + edp_brij_en: edp-brij-en { + pinmux { + pins = "gpio104"; + function = "gpio"; + }; + + pinconf { + pins = "gpio104"; + drive-strength = <2>; + bias-disable; + }; + }; + + en_pp3300_codec: en-pp3300-codec { + pinmux { + pins = "gpio83"; + function = "gpio"; + }; + + pinconf { + pins = "gpio83"; + drive-strength = <2>; + bias-disable; + }; + }; + + en_pp3300_dx_edp: en-pp3300-dx-edp { + pinmux { + pins = "gpio30"; + function = "gpio"; + }; + + pinconf { + pins = "gpio30"; + drive-strength = <2>; + bias-disable; + }; + }; + + en_pp3300_hub: en-pp3300-hub { + pinmux { + pins = "gpio84"; + function = "gpio"; + }; + + pinconf { + pins = "gpio84"; + drive-strength = <2>; + bias-disable; + }; + }; + + fp_to_ap_irq_l: fp-to-ap-irq-l { + pinmux { + pins = "gpio4"; + function = "gpio"; + input-enable; + }; + + pinconf { + pins = "gpio4"; + + /* Has external pullup */ + bias-disable; + }; + }; + + h1_ap_int_odl: h1-ap-int-odl { + pinmux { + pins = "gpio42"; + function = "gpio"; + input-enable; + }; + + pinconf { + pins = "gpio42"; + bias-pull-up; + }; + }; + + hp_irq: hp-irq { + pinmux { + pins = "gpio28"; + function = "gpio"; + }; + + pinconf { + pins = "gpio28"; + bias-pull-up; + }; + }; + + pen_irq_l: pen-irq-l { + pinmux { + pins = "gpio21"; + function = "gpio"; + }; + + pinconf { + pins = "gpio21"; + + /* Has external pullup */ + bias-disable; + }; + }; + + pen_pdct_l: pen-pdct-l { + pinmux { + pins = "gpio52"; + function = "gpio"; + }; + + pinconf { + pins = "gpio52"; + + /* Has external pullup */ + bias-disable; + }; + }; + + pen_rst_odl: pen-rst-odl { + pinmux { + pins = "gpio18"; + function = "gpio"; + }; + + pinconf { + pins = "gpio18"; + bias-disable; + drive-strength = <2>; + + /* + * The pen driver doesn't currently support + * driving this reset line. By specifying + * output-high here we're relying on the fact + * that this pin has a default pulldown at boot + * (which makes sure the pen was in reset if it + * was powered) and then we set it high here to + * take it out of reset. Better would be if the + * pen driver could control this and we could + * remove "output-high" here. + */ + output-high; /* TODO: Remove this? */ + }; + }; + + p_sensor_int_l: p-sensor-int-l { + pinmux { + pins = "gpio24"; + function = "gpio"; + input-enable; + }; + + pinconf { + pins = "gpio24"; + /* Has external pullup */ + bias-disable; + }; + }; + + qup_spi0_cs_gpio_init_high: qup-spi0-cs-gpio-init-high { + pinconf { + pins = "gpio37"; + output-high; + }; + }; + + qup_spi6_cs_gpio_init_high: qup-spi6-cs-gpio-init-high { + pinconf { + pins = "gpio62"; + output-high; + }; + }; + + qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high { + pinconf { + pins = "gpio89"; + output-high; + }; + }; + + qup_uart3_sleep: qup-uart3-sleep { + pinmux { + pins = "gpio38", "gpio39", + "gpio40", "gpio41"; + function = "gpio"; + }; + + pinconf-cts { + /* + * Configure a pull-down on CTS to match the pull of + * the Bluetooth module. + */ + pins = "gpio38"; + bias-pull-down; + }; + + pinconf-rts { + /* + * Configure pull-down on RTS. As RTS is active low + * signal, pull it low to indicate the BT SoC that it + * can wakeup the system anytime from suspend state by + * pulling RX low (by sending wakeup bytes). + */ + pins = "gpio39"; + bias-pull-down; + }; + + pinconf-tx { + /* + * Configure pull-up on TX when it isn't actively driven + * to prevent BT SoC from receiving garbage during sleep. + */ + pins = "gpio40"; + bias-pull-up; + }; + + pinconf-rx { + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module + * is floating which may cause spurious wakeups. + */ + pins = "gpio41"; + bias-pull-up; + }; + }; + + /* Named trackpad_int_1v8_odl on earlier revision schematics */ + trackpad_int_1v8_odl: + tp_int_odl: tp-int-odl { + pinmux { + pins = "gpio0"; + function = "gpio"; + }; + + pinconf { + pins = "gpio0"; + + /* Has external pullup */ + bias-disable; + }; + }; + + ts_int_l: ts-int-l { + pinmux { + pins = "gpio9"; + function = "gpio"; + }; + + pinconf { + pins = "gpio9"; + bias-pull-up; + }; + }; + + ts_reset_l: ts-reset-l { + pinmux { + pins = "gpio8"; + function = "gpio"; + }; + + pinconf { + pins = "gpio8"; + bias-disable; + drive-strength = <2>; + }; + }; + + sdc1_on: sdc1-on { + pinconf-clk { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <16>; + }; + + pinconf-cmd { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <16>; + }; + + pinconf-data { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <16>; + }; + + pinconf-rclk { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc1_off: sdc1-off { + pinconf-clk { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; + + pinconf-cmd { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + pinconf-data { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + + pinconf-rclk { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc2_on: sdc2-on { + pinconf-clk { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + + pinconf-cmd { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + pinconf-data { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + + pinconf-sd-cd { + pins = "gpio69"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + sdc2_off: sdc2-off { + pinconf-clk { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + + pinconf-cmd { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + pinconf-data { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + + pinconf-sd-cd { + pins = "gpio69"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + uf_cam_en: uf-cam-en { + pinmux { + pins = "gpio6"; + function = "gpio"; + }; + + pinconf { + pins = "gpio6"; + drive-strength = <2>; + /* External pull down */ + bias-disable; + }; + }; + + wf_cam_en: wf-cam-en { + pinmux { + pins = "gpio7"; + function = "gpio"; + }; + + pinconf { + pins = "gpio7"; + drive-strength = <2>; + /* External pull down */ + bias-disable; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi new file mode 100644 index 000000000..13fe1c92b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -0,0 +1,4421 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * SC7180 SoC device tree source + * + * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + aliases { + mmc1 = &sdhc_1; + mmc2 = &sdhc_2; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; + i2c9 = &i2c9; + i2c10 = &i2c10; + i2c11 = &i2c11; + spi0 = &spi0; + spi1 = &spi1; + spi3 = &spi3; + spi5 = &spi5; + spi6 = &spi6; + spi8 = &spi8; + spi10 = &spi10; + spi11 = &spi11; + }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + clock-frequency = <38400000>; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + clock-frequency = <32764>; + #clock-cells = <0>; + }; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: memory@80000000 { + reg = <0x0 0x80000000 0x0 0x600000>; + no-map; + }; + + xbl_mem: memory@80600000 { + reg = <0x0 0x80600000 0x0 0x200000>; + no-map; + }; + + aop_mem: memory@80800000 { + reg = <0x0 0x80800000 0x0 0x20000>; + no-map; + }; + + aop_cmd_db_mem: memory@80820000 { + reg = <0x0 0x80820000 0x0 0x20000>; + compatible = "qcom,cmd-db"; + no-map; + }; + + sec_apps_mem: memory@808ff000 { + reg = <0x0 0x808ff000 0x0 0x1000>; + no-map; + }; + + smem_mem: memory@80900000 { + reg = <0x0 0x80900000 0x0 0x200000>; + no-map; + }; + + tz_mem: memory@80b00000 { + reg = <0x0 0x80b00000 0x0 0x3900000>; + no-map; + }; + + ipa_fw_mem: memory@8b700000 { + reg = <0 0x8b700000 0 0x10000>; + no-map; + }; + + rmtfs_mem: memory@94600000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x94600000 0x0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo468"; + reg = <0x0 0x0>; + enable-method = "psci"; + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 + &LITTLE_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <415>; + dynamic-power-coefficient = <137>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + next-level-cache = <&L2_0>; + #cooling-cells = <2>; + qcom,freq-domain = <&cpufreq_hw 0>; + L2_0: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo468"; + reg = <0x0 0x100>; + enable-method = "psci"; + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 + &LITTLE_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <415>; + dynamic-power-coefficient = <137>; + next-level-cache = <&L2_100>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + #cooling-cells = <2>; + qcom,freq-domain = <&cpufreq_hw 0>; + L2_100: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "qcom,kryo468"; + reg = <0x0 0x200>; + enable-method = "psci"; + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 + &LITTLE_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <415>; + dynamic-power-coefficient = <137>; + next-level-cache = <&L2_200>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + #cooling-cells = <2>; + qcom,freq-domain = <&cpufreq_hw 0>; + L2_200: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "qcom,kryo468"; + reg = <0x0 0x300>; + enable-method = "psci"; + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 + &LITTLE_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <415>; + dynamic-power-coefficient = <137>; + next-level-cache = <&L2_300>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + #cooling-cells = <2>; + qcom,freq-domain = <&cpufreq_hw 0>; + L2_300: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "qcom,kryo468"; + reg = <0x0 0x400>; + enable-method = "psci"; + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 + &LITTLE_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <415>; + dynamic-power-coefficient = <137>; + next-level-cache = <&L2_400>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + #cooling-cells = <2>; + qcom,freq-domain = <&cpufreq_hw 0>; + L2_400: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "qcom,kryo468"; + reg = <0x0 0x500>; + enable-method = "psci"; + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 + &LITTLE_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <415>; + dynamic-power-coefficient = <137>; + next-level-cache = <&L2_500>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + #cooling-cells = <2>; + qcom,freq-domain = <&cpufreq_hw 0>; + L2_500: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "qcom,kryo468"; + reg = <0x0 0x600>; + enable-method = "psci"; + cpu-idle-states = <&BIG_CPU_SLEEP_0 + &BIG_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <480>; + next-level-cache = <&L2_600>; + operating-points-v2 = <&cpu6_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + #cooling-cells = <2>; + qcom,freq-domain = <&cpufreq_hw 1>; + L2_600: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "qcom,kryo468"; + reg = <0x0 0x700>; + enable-method = "psci"; + cpu-idle-states = <&BIG_CPU_SLEEP_0 + &BIG_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <480>; + next-level-cache = <&L2_700>; + operating-points-v2 = <&cpu6_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + #cooling-cells = <2>; + qcom,freq-domain = <&cpufreq_hw 1>; + L2_700: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + + core4 { + cpu = <&CPU4>; + }; + + core5 { + cpu = <&CPU5>; + }; + + core6 { + cpu = <&CPU6>; + }; + + core7 { + cpu = <&CPU7>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "little-power-down"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <549>; + exit-latency-us = <901>; + min-residency-us = <1774>; + local-timer-stop; + }; + + LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 { + compatible = "arm,idle-state"; + idle-state-name = "little-rail-power-down"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <702>; + exit-latency-us = <915>; + min-residency-us = <4001>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "big-power-down"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <523>; + exit-latency-us = <1244>; + min-residency-us = <2207>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_1: cpu-sleep-1-1 { + compatible = "arm,idle-state"; + idle-state-name = "big-rail-power-down"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <526>; + exit-latency-us = <1854>; + min-residency-us = <5555>; + local-timer-stop; + }; + + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "arm,idle-state"; + idle-state-name = "cluster-power-down"; + arm,psci-suspend-param = <0x40003444>; + entry-latency-us = <3263>; + exit-latency-us = <6562>; + min-residency-us = <9926>; + local-timer-stop; + }; + }; + }; + + cpu0_opp_table: opp-table-cpu0 { + compatible = "operating-points-v2"; + opp-shared; + + cpu0_opp1: opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-peak-kBps = <1200000 4800000>; + }; + + cpu0_opp2: opp-576000000 { + opp-hz = /bits/ 64 <576000000>; + opp-peak-kBps = <1200000 4800000>; + }; + + cpu0_opp3: opp-768000000 { + opp-hz = /bits/ 64 <768000000>; + opp-peak-kBps = <1200000 4800000>; + }; + + cpu0_opp4: opp-1017600000 { + opp-hz = /bits/ 64 <1017600000>; + opp-peak-kBps = <1804000 8908800>; + }; + + cpu0_opp5: opp-1248000000 { + opp-hz = /bits/ 64 <1248000000>; + opp-peak-kBps = <2188000 12902400>; + }; + + cpu0_opp6: opp-1324800000 { + opp-hz = /bits/ 64 <1324800000>; + opp-peak-kBps = <2188000 12902400>; + }; + + cpu0_opp7: opp-1516800000 { + opp-hz = /bits/ 64 <1516800000>; + opp-peak-kBps = <3072000 15052800>; + }; + + cpu0_opp8: opp-1612800000 { + opp-hz = /bits/ 64 <1612800000>; + opp-peak-kBps = <3072000 15052800>; + }; + + cpu0_opp9: opp-1708800000 { + opp-hz = /bits/ 64 <1708800000>; + opp-peak-kBps = <3072000 15052800>; + }; + + cpu0_opp10: opp-1804800000 { + opp-hz = /bits/ 64 <1804800000>; + opp-peak-kBps = <4068000 22425600>; + }; + }; + + cpu6_opp_table: opp-table-cpu6 { + compatible = "operating-points-v2"; + opp-shared; + + cpu6_opp1: opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-peak-kBps = <2188000 8908800>; + }; + + cpu6_opp2: opp-652800000 { + opp-hz = /bits/ 64 <652800000>; + opp-peak-kBps = <2188000 8908800>; + }; + + cpu6_opp3: opp-825600000 { + opp-hz = /bits/ 64 <825600000>; + opp-peak-kBps = <2188000 8908800>; + }; + + cpu6_opp4: opp-979200000 { + opp-hz = /bits/ 64 <979200000>; + opp-peak-kBps = <2188000 8908800>; + }; + + cpu6_opp5: opp-1113600000 { + opp-hz = /bits/ 64 <1113600000>; + opp-peak-kBps = <2188000 8908800>; + }; + + cpu6_opp6: opp-1267200000 { + opp-hz = /bits/ 64 <1267200000>; + opp-peak-kBps = <4068000 12902400>; + }; + + cpu6_opp7: opp-1555200000 { + opp-hz = /bits/ 64 <1555200000>; + opp-peak-kBps = <4068000 15052800>; + }; + + cpu6_opp8: opp-1708800000 { + opp-hz = /bits/ 64 <1708800000>; + opp-peak-kBps = <6220000 19353600>; + }; + + cpu6_opp9: opp-1843200000 { + opp-hz = /bits/ 64 <1843200000>; + opp-peak-kBps = <6220000 19353600>; + }; + + cpu6_opp10: opp-1900800000 { + opp-hz = /bits/ 64 <1900800000>; + opp-peak-kBps = <6220000 22425600>; + }; + + cpu6_opp11: opp-1996800000 { + opp-hz = /bits/ 64 <1996800000>; + opp-peak-kBps = <6220000 22425600>; + }; + + cpu6_opp12: opp-2112000000 { + opp-hz = /bits/ 64 <2112000000>; + opp-peak-kBps = <6220000 22425600>; + }; + + cpu6_opp13: opp-2208000000 { + opp-hz = /bits/ 64 <2208000000>; + opp-peak-kBps = <7216000 22425600>; + }; + + cpu6_opp14: opp-2323200000 { + opp-hz = /bits/ 64 <2323200000>; + opp-peak-kBps = <7216000 22425600>; + }; + + cpu6_opp15: opp-2400000000 { + opp-hz = /bits/ 64 <2400000000>; + opp-peak-kBps = <8532000 23347200>; + }; + + cpu6_opp16: opp-2553600000 { + opp-hz = /bits/ 64 <2553600000>; + opp-peak-kBps = <8532000 23347200>; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0 0x80000000 0 0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = ; + }; + + firmware { + scm { + compatible = "qcom,scm-sc7180", "qcom,scm"; + }; + }; + + smem { + compatible = "qcom,smem"; + memory-region = <&smem_mem>; + hwlocks = <&tcsr_mutex 3>; + }; + + smp2p-cdsp { + compatible = "qcom,smp2p"; + qcom,smem = <94>, <432>; + + interrupts = ; + + mboxes = <&apss_shared 6>; + + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + cdsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + cdsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-lpass { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupts = ; + + mboxes = <&apss_shared 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-mpss { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + interrupts = ; + mboxes = <&apss_shared 14>; + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + ipa_smp2p_out: ipa-ap-to-modem { + qcom,entry-name = "ipa"; + #qcom,smem-state-cells = <1>; + }; + + ipa_smp2p_in: ipa-modem-to-ap { + qcom,entry-name = "ipa"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + soc: soc@0 { + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + compatible = "simple-bus"; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-sc7180"; + reg = <0 0x00100000 0 0x1f0000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>; + clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + qfprom: efuse@784000 { + compatible = "qcom,sc7180-qfprom", "qcom,qfprom"; + reg = <0 0x00784000 0 0x7a0>, + <0 0x00780000 0 0x7a0>, + <0 0x00782000 0 0x100>, + <0 0x00786000 0 0x1fff>; + + clocks = <&gcc GCC_SEC_CTRL_CLK_SRC>; + clock-names = "core"; + #address-cells = <1>; + #size-cells = <1>; + + qusb2p_hstx_trim: hstx-trim-primary@25b { + reg = <0x25b 0x1>; + bits = <1 3>; + }; + + gpu_speed_bin: gpu_speed_bin@1d2 { + reg = <0x1d2 0x2>; + bits = <5 8>; + }; + }; + + sdhc_1: mmc@7c4000 { + compatible = "qcom,sc7180-sdhci", "qcom,sdhci-msm-v5"; + reg = <0 0x7c4000 0 0x1000>, + <0 0x07c5000 0 0x1000>; + reg-names = "hc", "cqhci"; + + iommus = <&apps_smmu 0x60 0x0>; + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "core", "xo"; + interconnects = <&aggre1_noc MASTER_EMMC 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_EMMC_CFG 0>; + interconnect-names = "sdhc-ddr","cpu-sdhc"; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&sdhc1_opp_table>; + + bus-width = <8>; + non-removable; + supports-cqe; + + mmc-ddr-1_8v; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + + status = "disabled"; + + sdhc1_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <1800000 600000>; + opp-avg-kBps = <100000 0>; + }; + + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <5400000 1600000>; + opp-avg-kBps = <390000 0>; + }; + }; + }; + + qup_opp_table: opp-table-qup { + compatible = "operating-points-v2"; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-128000000 { + opp-hz = /bits/ 64 <128000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + + qupv3_id_0: geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x008c0000 0 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + iommus = <&apps_smmu 0x43 0x0>; + status = "disabled"; + + i2c0: i2c@880000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00880000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c0_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SC7180_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + status = "disabled"; + }; + + spi0: spi@880000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00880000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi0_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart0: serial@880000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00880000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart0_default>; + interrupts = ; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c1: i2c@884000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00884000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c1_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SC7180_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + status = "disabled"; + }; + + spi1: spi@884000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00884000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi1_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart1: serial@884000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00884000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart1_default>; + interrupts = ; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c2: i2c@888000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00888000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c2_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SC7180_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + status = "disabled"; + }; + + uart2: serial@888000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00888000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart2_default>; + interrupts = ; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c3: i2c@88c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0088c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c3_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SC7180_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + status = "disabled"; + }; + + spi3: spi@88c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0088c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi3_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart3: serial@88c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x0088c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart3_default>; + interrupts = ; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c4: i2c@890000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00890000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c4_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SC7180_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + status = "disabled"; + }; + + uart4: serial@890000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00890000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart4_default>; + interrupts = ; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c5: i2c@894000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00894000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c5_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SC7180_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + status = "disabled"; + }; + + spi5: spi@894000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00894000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi5_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart5: serial@894000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00894000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart5_default>; + interrupts = ; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + }; + + qupv3_id_1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x00ac0000 0 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + iommus = <&apps_smmu 0x4c3 0x0>; + status = "disabled"; + + i2c6: i2c@a80000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a80000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c6_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SC7180_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + status = "disabled"; + }; + + spi6: spi@a80000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a80000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi6_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart6: serial@a80000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a80000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart6_default>; + interrupts = ; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c7: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a84000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c7_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SC7180_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + status = "disabled"; + }; + + uart7: serial@a84000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a84000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart7_default>; + interrupts = ; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c8: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a88000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c8_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SC7180_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + status = "disabled"; + }; + + spi8: spi@a88000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a88000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi8_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart8: serial@a88000 { + compatible = "qcom,geni-debug-uart"; + reg = <0 0x00a88000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart8_default>; + interrupts = ; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c9: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a8c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c9_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SC7180_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + status = "disabled"; + }; + + uart9: serial@a8c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a8c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart9_default>; + interrupts = ; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c10: i2c@a90000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a90000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c10_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SC7180_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + status = "disabled"; + }; + + spi10: spi@a90000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a90000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi10_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart10: serial@a90000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a90000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart10_default>; + interrupts = ; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c11: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a94000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c11_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SC7180_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + status = "disabled"; + }; + + spi11: spi@a94000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a94000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi11_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart11: serial@a94000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a94000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart11_default>; + interrupts = ; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + }; + + config_noc: interconnect@1500000 { + compatible = "qcom,sc7180-config-noc"; + reg = <0 0x01500000 0 0x28000>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect@1620000 { + compatible = "qcom,sc7180-system-noc"; + reg = <0 0x01620000 0 0x17080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mc_virt: interconnect@1638000 { + compatible = "qcom,sc7180-mc-virt"; + reg = <0 0x01638000 0 0x1000>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + qup_virt: interconnect@1650000 { + compatible = "qcom,sc7180-qup-virt"; + reg = <0 0x01650000 0 0x1000>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre1_noc: interconnect@16e0000 { + compatible = "qcom,sc7180-aggre1-noc"; + reg = <0 0x016e0000 0 0x15080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre2_noc: interconnect@1705000 { + compatible = "qcom,sc7180-aggre2-noc"; + reg = <0 0x01705000 0 0x9000>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + compute_noc: interconnect@170e000 { + compatible = "qcom,sc7180-compute-noc"; + reg = <0 0x0170e000 0 0x6000>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mmss_noc: interconnect@1740000 { + compatible = "qcom,sc7180-mmss-noc"; + reg = <0 0x01740000 0 0x1c100>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + ipa: ipa@1e40000 { + compatible = "qcom,sc7180-ipa"; + + iommus = <&apps_smmu 0x440 0x0>, + <&apps_smmu 0x442 0x0>; + reg = <0 0x1e40000 0 0x7000>, + <0 0x1e47000 0 0x2000>, + <0 0x1e04000 0 0x2c000>; + reg-names = "ipa-reg", + "ipa-shared", + "gsi"; + + interrupts-extended = <&intc GIC_SPI 311 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>, + <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ipa", + "gsi", + "ipa-clock-query", + "ipa-setup-ready"; + + clocks = <&rpmhcc RPMH_IPA_CLK>; + clock-names = "core"; + + interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>, + <&aggre2_noc MASTER_IPA 0 &system_noc SLAVE_IMEM 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>; + interconnect-names = "memory", + "imem", + "config"; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&ipa_smp2p_out 0>, + <&ipa_smp2p_out 1>; + qcom,smem-state-names = "ipa-clock-enabled-valid", + "ipa-clock-enabled"; + + status = "disabled"; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0 0x01f40000 0 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr_regs_1: syscon@1f60000 { + compatible = "qcom,sc7180-tcsr", "syscon"; + reg = <0 0x01f60000 0 0x20000>; + }; + + tcsr_regs_2: syscon@1fc0000 { + compatible = "qcom,sc7180-tcsr", "syscon"; + reg = <0 0x01fc0000 0 0x40000>; + }; + + tlmm: pinctrl@3500000 { + compatible = "qcom,sc7180-pinctrl"; + reg = <0 0x03500000 0 0x300000>, + <0 0x03900000 0 0x300000>, + <0 0x03d00000 0 0x300000>; + reg-names = "west", "north", "south"; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 120>; + wakeup-parent = <&pdc>; + + dp_hot_plug_det: dp-hot-plug-det { + pinmux { + pins = "gpio117"; + function = "dp_hot"; + }; + }; + + qspi_clk: qspi-clk { + pinmux { + pins = "gpio63"; + function = "qspi_clk"; + }; + }; + + qspi_cs0: qspi-cs0 { + pinmux { + pins = "gpio68"; + function = "qspi_cs"; + }; + }; + + qspi_cs1: qspi-cs1 { + pinmux { + pins = "gpio72"; + function = "qspi_cs"; + }; + }; + + qspi_data01: qspi-data01 { + pinmux-data { + pins = "gpio64", "gpio65"; + function = "qspi_data"; + }; + }; + + qspi_data23: qspi-data23 { + pinmux-data { + pins = "gpio66", "gpio67"; + function = "qspi_data"; + }; + }; + + qup_i2c0_default: qup-i2c0-default { + pinmux { + pins = "gpio34", "gpio35"; + function = "qup00"; + }; + }; + + qup_i2c1_default: qup-i2c1-default { + pinmux { + pins = "gpio0", "gpio1"; + function = "qup01"; + }; + }; + + qup_i2c2_default: qup-i2c2-default { + pinmux { + pins = "gpio15", "gpio16"; + function = "qup02_i2c"; + }; + }; + + qup_i2c3_default: qup-i2c3-default { + pinmux { + pins = "gpio38", "gpio39"; + function = "qup03"; + }; + }; + + qup_i2c4_default: qup-i2c4-default { + pinmux { + pins = "gpio115", "gpio116"; + function = "qup04_i2c"; + }; + }; + + qup_i2c5_default: qup-i2c5-default { + pinmux { + pins = "gpio25", "gpio26"; + function = "qup05"; + }; + }; + + qup_i2c6_default: qup-i2c6-default { + pinmux { + pins = "gpio59", "gpio60"; + function = "qup10"; + }; + }; + + qup_i2c7_default: qup-i2c7-default { + pinmux { + pins = "gpio6", "gpio7"; + function = "qup11_i2c"; + }; + }; + + qup_i2c8_default: qup-i2c8-default { + pinmux { + pins = "gpio42", "gpio43"; + function = "qup12"; + }; + }; + + qup_i2c9_default: qup-i2c9-default { + pinmux { + pins = "gpio46", "gpio47"; + function = "qup13_i2c"; + }; + }; + + qup_i2c10_default: qup-i2c10-default { + pinmux { + pins = "gpio86", "gpio87"; + function = "qup14"; + }; + }; + + qup_i2c11_default: qup-i2c11-default { + pinmux { + pins = "gpio53", "gpio54"; + function = "qup15"; + }; + }; + + qup_spi0_default: qup-spi0-default { + pinmux { + pins = "gpio34", "gpio35", + "gpio36", "gpio37"; + function = "qup00"; + }; + }; + + qup_spi0_cs_gpio: qup-spi0-cs-gpio { + pinmux { + pins = "gpio34", "gpio35", + "gpio36"; + function = "qup00"; + }; + + pinmux-cs { + pins = "gpio37"; + function = "gpio"; + }; + }; + + qup_spi1_default: qup-spi1-default { + pinmux { + pins = "gpio0", "gpio1", + "gpio2", "gpio3"; + function = "qup01"; + }; + }; + + qup_spi1_cs_gpio: qup-spi1-cs-gpio { + pinmux { + pins = "gpio0", "gpio1", + "gpio2"; + function = "qup01"; + }; + + pinmux-cs { + pins = "gpio3"; + function = "gpio"; + }; + }; + + qup_spi3_default: qup-spi3-default { + pinmux { + pins = "gpio38", "gpio39", + "gpio40", "gpio41"; + function = "qup03"; + }; + }; + + qup_spi3_cs_gpio: qup-spi3-cs-gpio { + pinmux { + pins = "gpio38", "gpio39", + "gpio40"; + function = "qup03"; + }; + + pinmux-cs { + pins = "gpio41"; + function = "gpio"; + }; + }; + + qup_spi5_default: qup-spi5-default { + pinmux { + pins = "gpio25", "gpio26", + "gpio27", "gpio28"; + function = "qup05"; + }; + }; + + qup_spi5_cs_gpio: qup-spi5-cs-gpio { + pinmux { + pins = "gpio25", "gpio26", + "gpio27"; + function = "qup05"; + }; + + pinmux-cs { + pins = "gpio28"; + function = "gpio"; + }; + }; + + qup_spi6_default: qup-spi6-default { + pinmux { + pins = "gpio59", "gpio60", + "gpio61", "gpio62"; + function = "qup10"; + }; + }; + + qup_spi6_cs_gpio: qup-spi6-cs-gpio { + pinmux { + pins = "gpio59", "gpio60", + "gpio61"; + function = "qup10"; + }; + + pinmux-cs { + pins = "gpio62"; + function = "gpio"; + }; + }; + + qup_spi8_default: qup-spi8-default { + pinmux { + pins = "gpio42", "gpio43", + "gpio44", "gpio45"; + function = "qup12"; + }; + }; + + qup_spi8_cs_gpio: qup-spi8-cs-gpio { + pinmux { + pins = "gpio42", "gpio43", + "gpio44"; + function = "qup12"; + }; + + pinmux-cs { + pins = "gpio45"; + function = "gpio"; + }; + }; + + qup_spi10_default: qup-spi10-default { + pinmux { + pins = "gpio86", "gpio87", + "gpio88", "gpio89"; + function = "qup14"; + }; + }; + + qup_spi10_cs_gpio: qup-spi10-cs-gpio { + pinmux { + pins = "gpio86", "gpio87", + "gpio88"; + function = "qup14"; + }; + + pinmux-cs { + pins = "gpio89"; + function = "gpio"; + }; + }; + + qup_spi11_default: qup-spi11-default { + pinmux { + pins = "gpio53", "gpio54", + "gpio55", "gpio56"; + function = "qup15"; + }; + }; + + qup_spi11_cs_gpio: qup-spi11-cs-gpio { + pinmux { + pins = "gpio53", "gpio54", + "gpio55"; + function = "qup15"; + }; + + pinmux-cs { + pins = "gpio56"; + function = "gpio"; + }; + }; + + qup_uart0_default: qup-uart0-default { + pinmux { + pins = "gpio34", "gpio35", + "gpio36", "gpio37"; + function = "qup00"; + }; + }; + + qup_uart1_default: qup-uart1-default { + pinmux { + pins = "gpio0", "gpio1", + "gpio2", "gpio3"; + function = "qup01"; + }; + }; + + qup_uart2_default: qup-uart2-default { + pinmux { + pins = "gpio15", "gpio16"; + function = "qup02_uart"; + }; + }; + + qup_uart3_default: qup-uart3-default { + pinmux { + pins = "gpio38", "gpio39", + "gpio40", "gpio41"; + function = "qup03"; + }; + }; + + qup_uart4_default: qup-uart4-default { + pinmux { + pins = "gpio115", "gpio116"; + function = "qup04_uart"; + }; + }; + + qup_uart5_default: qup-uart5-default { + pinmux { + pins = "gpio25", "gpio26", + "gpio27", "gpio28"; + function = "qup05"; + }; + }; + + qup_uart6_default: qup-uart6-default { + pinmux { + pins = "gpio59", "gpio60", + "gpio61", "gpio62"; + function = "qup10"; + }; + }; + + qup_uart7_default: qup-uart7-default { + pinmux { + pins = "gpio6", "gpio7"; + function = "qup11_uart"; + }; + }; + + qup_uart8_default: qup-uart8-default { + pinmux { + pins = "gpio44", "gpio45"; + function = "qup12"; + }; + }; + + qup_uart9_default: qup-uart9-default { + pinmux { + pins = "gpio46", "gpio47"; + function = "qup13_uart"; + }; + }; + + qup_uart10_default: qup-uart10-default { + pinmux { + pins = "gpio86", "gpio87", + "gpio88", "gpio89"; + function = "qup14"; + }; + }; + + qup_uart11_default: qup-uart11-default { + pinmux { + pins = "gpio53", "gpio54", + "gpio55", "gpio56"; + function = "qup15"; + }; + }; + + sec_mi2s_active: sec-mi2s-active { + pinmux { + pins = "gpio49", "gpio50", "gpio51"; + function = "mi2s_1"; + }; + }; + + pri_mi2s_active: pri-mi2s-active { + pinmux { + pins = "gpio53", "gpio54", "gpio55", "gpio56"; + function = "mi2s_0"; + }; + }; + + pri_mi2s_mclk_active: pri-mi2s-mclk-active { + pinmux { + pins = "gpio57"; + function = "lpass_ext"; + }; + }; + }; + + remoteproc_mpss: remoteproc@4080000 { + compatible = "qcom,sc7180-mpss-pas"; + reg = <0 0x04080000 0 0x4040>, <0 0x04180000 0 0x48>; + reg-names = "qdsp6", "rmb"; + + interrupts-extended = <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>, + <&gcc GCC_MSS_NAV_AXI_CLK>, + <&gcc GCC_MSS_SNOC_AXI_CLK>, + <&gcc GCC_MSS_MFAB_AXIS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "bus", "nav", "snoc_axi", + "mnoc_axi", "xo"; + + power-domains = <&rpmhpd SC7180_CX>, + <&rpmhpd SC7180_MX>, + <&rpmhpd SC7180_MSS>; + power-domain-names = "cx", "mx", "mss"; + + memory-region = <&mpss_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + resets = <&aoss_reset AOSS_CC_MSS_RESTART>, + <&pdc_reset PDC_MODEM_SYNC_RESET>; + reset-names = "mss_restart", "pdc_reset"; + + qcom,halt-regs = <&tcsr_regs_1 0x3000 0x5000 0x4000>; + qcom,spare-regs = <&tcsr_regs_2 0xb3e4>; + + status = "disabled"; + + glink-edge { + interrupts = ; + label = "modem"; + qcom,remote-pid = <1>; + mboxes = <&apss_shared 12>; + }; + }; + + gpu: gpu@5000000 { + compatible = "qcom,adreno-618.0", "qcom,adreno"; + reg = <0 0x05000000 0 0x40000>, <0 0x0509e000 0 0x1000>, + <0 0x05061000 0 0x800>; + reg-names = "kgsl_3d0_reg_memory", "cx_mem", "cx_dbgc"; + interrupts = ; + iommus = <&adreno_smmu 0>; + operating-points-v2 = <&gpu_opp_table>; + qcom,gmu = <&gmu>; + + #cooling-cells = <2>; + + nvmem-cells = <&gpu_speed_bin>; + nvmem-cell-names = "speed_bin"; + + interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "gfx-mem"; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-825000000 { + opp-hz = /bits/ 64 <825000000>; + opp-level = ; + opp-peak-kBps = <8532000>; + opp-supported-hw = <0x04>; + }; + + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-level = ; + opp-peak-kBps = <8532000>; + opp-supported-hw = <0x07>; + }; + + opp-650000000 { + opp-hz = /bits/ 64 <650000000>; + opp-level = ; + opp-peak-kBps = <7216000>; + opp-supported-hw = <0x07>; + }; + + opp-565000000 { + opp-hz = /bits/ 64 <565000000>; + opp-level = ; + opp-peak-kBps = <5412000>; + opp-supported-hw = <0x07>; + }; + + opp-430000000 { + opp-hz = /bits/ 64 <430000000>; + opp-level = ; + opp-peak-kBps = <5412000>; + opp-supported-hw = <0x07>; + }; + + opp-355000000 { + opp-hz = /bits/ 64 <355000000>; + opp-level = ; + opp-peak-kBps = <3072000>; + opp-supported-hw = <0x07>; + }; + + opp-267000000 { + opp-hz = /bits/ 64 <267000000>; + opp-level = ; + opp-peak-kBps = <3072000>; + opp-supported-hw = <0x07>; + }; + + opp-180000000 { + opp-hz = /bits/ 64 <180000000>; + opp-level = ; + opp-peak-kBps = <1804000>; + opp-supported-hw = <0x07>; + }; + }; + }; + + adreno_smmu: iommu@5040000 { + compatible = "qcom,sc7180-smmu-v2", "qcom,adreno-smmu", "qcom,smmu-v2"; + reg = <0 0x05040000 0 0x10000>; + #iommu-cells = <1>; + #global-interrupts = <2>; + interrupts = , + , + , + , + , + , + , + , + , + ; + + clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gcc GCC_GPU_CFG_AHB_CLK>; + clock-names = "bus", "iface"; + + power-domains = <&gpucc CX_GDSC>; + }; + + gmu: gmu@506a000 { + compatible = "qcom,adreno-gmu-618.0", "qcom,adreno-gmu"; + reg = <0 0x0506a000 0 0x31000>, <0 0x0b290000 0 0x10000>, + <0 0x0b490000 0 0x10000>; + reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq"; + interrupts = , + ; + interrupt-names = "hfi", "gmu"; + clocks = <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_CXO_CLK>, + <&gcc GCC_DDRSS_GPU_AXI_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>; + clock-names = "gmu", "cxo", "axi", "memnoc"; + power-domains = <&gpucc CX_GDSC>, <&gpucc GX_GDSC>; + power-domain-names = "cx", "gx"; + iommus = <&adreno_smmu 5>; + operating-points-v2 = <&gmu_opp_table>; + + gmu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-level = ; + }; + }; + }; + + gpucc: clock-controller@5090000 { + compatible = "qcom,sc7180-gpucc"; + reg = <0 0x05090000 0 0x9000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + clock-names = "bi_tcxo", + "gcc_gpu_gpll0_clk_src", + "gcc_gpu_gpll0_div_clk_src"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + stm@6002000 { + compatible = "arm,coresight-stm", "arm,primecell"; + reg = <0 0x06002000 0 0x1000>, + <0 0x16280000 0 0x180000>; + reg-names = "stm-base", "stm-stimulus-base"; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + stm_out: endpoint { + remote-endpoint = <&funnel0_in7>; + }; + }; + }; + }; + + funnel@6041000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06041000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel0_out: endpoint { + remote-endpoint = <&merge_funnel_in0>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@7 { + reg = <7>; + funnel0_in7: endpoint { + remote-endpoint = <&stm_out>; + }; + }; + }; + }; + + funnel@6042000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06042000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel1_out: endpoint { + remote-endpoint = <&merge_funnel_in1>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@4 { + reg = <4>; + funnel1_in4: endpoint { + remote-endpoint = <&apss_merge_funnel_out>; + }; + }; + }; + }; + + funnel@6045000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06045000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + merge_funnel_out: endpoint { + remote-endpoint = <&swao_funnel_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + merge_funnel_in0: endpoint { + remote-endpoint = <&funnel0_out>; + }; + }; + + port@1 { + reg = <1>; + merge_funnel_in1: endpoint { + remote-endpoint = <&funnel1_out>; + }; + }; + }; + }; + + replicator@6046000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0 0x06046000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + replicator_out: endpoint { + remote-endpoint = <&etr_in>; + }; + }; + }; + + in-ports { + port { + replicator_in: endpoint { + remote-endpoint = <&swao_replicator_out>; + }; + }; + }; + }; + + etr@6048000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x06048000 0 0x1000>; + iommus = <&apps_smmu 0x04a0 0x20>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,scatter-gather; + + in-ports { + port { + etr_in: endpoint { + remote-endpoint = <&replicator_out>; + }; + }; + }; + }; + + funnel@6b04000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06b04000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + swao_funnel_out: endpoint { + remote-endpoint = <&etf_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@7 { + reg = <7>; + swao_funnel_in: endpoint { + remote-endpoint = <&merge_funnel_out>; + }; + }; + }; + }; + + etf@6b05000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x06b05000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + etf_out: endpoint { + remote-endpoint = <&swao_replicator_in>; + }; + }; + }; + + in-ports { + port { + etf_in: endpoint { + remote-endpoint = <&swao_funnel_out>; + }; + }; + }; + }; + + replicator@6b06000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0 0x06b06000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + qcom,replicator-loses-context; + + out-ports { + port { + swao_replicator_out: endpoint { + remote-endpoint = <&replicator_in>; + }; + }; + }; + + in-ports { + port { + swao_replicator_in: endpoint { + remote-endpoint = <&etf_out>; + }; + }; + }; + }; + + etm@7040000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07040000 0 0x1000>; + + cpu = <&CPU0>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = <&apss_funnel_in0>; + }; + }; + }; + }; + + etm@7140000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07140000 0 0x1000>; + + cpu = <&CPU1>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = <&apss_funnel_in1>; + }; + }; + }; + }; + + etm@7240000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07240000 0 0x1000>; + + cpu = <&CPU2>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = <&apss_funnel_in2>; + }; + }; + }; + }; + + etm@7340000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07340000 0 0x1000>; + + cpu = <&CPU3>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = <&apss_funnel_in3>; + }; + }; + }; + }; + + etm@7440000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07440000 0 0x1000>; + + cpu = <&CPU4>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm4_out: endpoint { + remote-endpoint = <&apss_funnel_in4>; + }; + }; + }; + }; + + etm@7540000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07540000 0 0x1000>; + + cpu = <&CPU5>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm5_out: endpoint { + remote-endpoint = <&apss_funnel_in5>; + }; + }; + }; + }; + + etm@7640000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07640000 0 0x1000>; + + cpu = <&CPU6>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm6_out: endpoint { + remote-endpoint = <&apss_funnel_in6>; + }; + }; + }; + }; + + etm@7740000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07740000 0 0x1000>; + + cpu = <&CPU7>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm7_out: endpoint { + remote-endpoint = <&apss_funnel_in7>; + }; + }; + }; + }; + + funnel@7800000 { /* APSS Funnel */ + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x07800000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + apss_funnel_out: endpoint { + remote-endpoint = <&apss_merge_funnel_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + apss_funnel_in0: endpoint { + remote-endpoint = <&etm0_out>; + }; + }; + + port@1 { + reg = <1>; + apss_funnel_in1: endpoint { + remote-endpoint = <&etm1_out>; + }; + }; + + port@2 { + reg = <2>; + apss_funnel_in2: endpoint { + remote-endpoint = <&etm2_out>; + }; + }; + + port@3 { + reg = <3>; + apss_funnel_in3: endpoint { + remote-endpoint = <&etm3_out>; + }; + }; + + port@4 { + reg = <4>; + apss_funnel_in4: endpoint { + remote-endpoint = <&etm4_out>; + }; + }; + + port@5 { + reg = <5>; + apss_funnel_in5: endpoint { + remote-endpoint = <&etm5_out>; + }; + }; + + port@6 { + reg = <6>; + apss_funnel_in6: endpoint { + remote-endpoint = <&etm6_out>; + }; + }; + + port@7 { + reg = <7>; + apss_funnel_in7: endpoint { + remote-endpoint = <&etm7_out>; + }; + }; + }; + }; + + funnel@7810000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x07810000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + apss_merge_funnel_out: endpoint { + remote-endpoint = <&funnel1_in4>; + }; + }; + }; + + in-ports { + port { + apss_merge_funnel_in: endpoint { + remote-endpoint = <&apss_funnel_out>; + }; + }; + }; + }; + + sdhc_2: mmc@8804000 { + compatible = "qcom,sc7180-sdhci", "qcom,sdhci-msm-v5"; + reg = <0 0x08804000 0 0x1000>; + + iommus = <&apps_smmu 0x80 0>; + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "core", "xo"; + + interconnects = <&aggre1_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>; + interconnect-names = "sdhc-ddr","cpu-sdhc"; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&sdhc2_opp_table>; + + bus-width = <4>; + + status = "disabled"; + + sdhc2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <1800000 600000>; + opp-avg-kBps = <100000 0>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <5400000 1600000>; + opp-avg-kBps = <200000 0>; + }; + }; + }; + + qspi_opp_table: opp-table-qspi { + compatible = "operating-points-v2"; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-150000000 { + opp-hz = /bits/ 64 <150000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + + qspi: spi@88dc000 { + compatible = "qcom,sc7180-qspi", "qcom,qspi-v1"; + reg = <0 0x088dc000 0 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>, + <&gcc GCC_QSPI_CORE_CLK>; + clock-names = "iface", "core"; + interconnects = <&gem_noc MASTER_APPSS_PROC 0 + &config_noc SLAVE_QSPI_0 0>; + interconnect-names = "qspi-config"; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qspi_opp_table>; + status = "disabled"; + }; + + usb_1_hsphy: phy@88e3000 { + compatible = "qcom,sc7180-qusb2-phy", "qcom,qusb2-v2-phy"; + reg = <0 0x088e3000 0 0x400>; + status = "disabled"; + #phy-cells = <0>; + clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "cfg_ahb", "ref"; + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + + nvmem-cells = <&qusb2p_hstx_trim>; + }; + + usb_1_qmpphy: phy-wrapper@88e9000 { + compatible = "qcom,sc7180-qmp-usb3-dp-phy"; + reg = <0 0x088e9000 0 0x18c>, + <0 0x088e8000 0 0x3c>, + <0 0x088ea000 0 0x18c>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "com_aux"; + + resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, + <&gcc GCC_USB3_DP_PHY_PRIM_BCR>; + reset-names = "phy", "common"; + + usb_1_ssphy: usb3-phy@88e9200 { + reg = <0 0x088e9200 0 0x128>, + <0 0x088e9400 0 0x200>, + <0 0x088e9c00 0 0x218>, + <0 0x088e9600 0 0x128>, + <0 0x088e9800 0 0x200>, + <0 0x088e9a00 0 0x18>; + #clock-cells = <0>; + #phy-cells = <0>; + clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_phy_pipe_clk_src"; + }; + + dp_phy: dp-phy@88ea200 { + reg = <0 0x088ea200 0 0x200>, + <0 0x088ea400 0 0x200>, + <0 0x088eaa00 0 0x200>, + <0 0x088ea600 0 0x200>, + <0 0x088ea800 0 0x200>; + #clock-cells = <1>; + #phy-cells = <0>; + }; + }; + + dc_noc: interconnect@9160000 { + compatible = "qcom,sc7180-dc-noc"; + reg = <0 0x09160000 0 0x03200>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system-cache-controller@9200000 { + compatible = "qcom,sc7180-llcc"; + reg = <0 0x09200000 0 0x50000>, <0 0x09600000 0 0x50000>; + reg-names = "llcc_base", "llcc_broadcast_base"; + interrupts = ; + }; + + gem_noc: interconnect@9680000 { + compatible = "qcom,sc7180-gem-noc"; + reg = <0 0x09680000 0 0x3e200>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + npu_noc: interconnect@9990000 { + compatible = "qcom,sc7180-npu-noc"; + reg = <0 0x09990000 0 0x1600>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + usb_1: usb@a6f8800 { + compatible = "qcom,sc7180-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + dma-ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <150000000>; + + interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 6 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 8 IRQ_TYPE_EDGE_BOTH>, + <&pdc 9 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "hs_phy_irq", "ss_phy_irq", + "dm_hs_phy_irq", "dp_hs_phy_irq"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + interconnects = <&aggre2_noc MASTER_USB3 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3 0>; + interconnect-names = "usb-ddr", "apps-usb"; + + usb_1_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xe000>; + interrupts = ; + iommus = <&apps_smmu 0x540 0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + maximum-speed = "super-speed"; + }; + }; + + venus: video-codec@aa00000 { + compatible = "qcom,sc7180-venus"; + reg = <0 0x0aa00000 0 0xff000>; + interrupts = ; + power-domains = <&videocc VENUS_GDSC>, + <&videocc VCODEC0_GDSC>, + <&rpmhpd SC7180_CX>; + power-domain-names = "venus", "vcodec0", "cx"; + operating-points-v2 = <&venus_opp_table>; + clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>, + <&videocc VIDEO_CC_VENUS_AHB_CLK>, + <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>, + <&videocc VIDEO_CC_VCODEC0_CORE_CLK>, + <&videocc VIDEO_CC_VCODEC0_AXI_CLK>; + clock-names = "core", "iface", "bus", + "vcodec0_core", "vcodec0_bus"; + iommus = <&apps_smmu 0x0c00 0x60>; + memory-region = <&venus_mem>; + interconnects = <&mmss_noc MASTER_VIDEO_P0 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_VENUS_CFG 0>; + interconnect-names = "video-mem", "cpu-cfg"; + + video-decoder { + compatible = "venus-decoder"; + }; + + video-encoder { + compatible = "venus-encoder"; + }; + + venus_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-150000000 { + opp-hz = /bits/ 64 <150000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-340000000 { + opp-hz = /bits/ 64 <340000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-434000000 { + opp-hz = /bits/ 64 <434000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + + opp-500000097 { + opp-hz = /bits/ 64 <500000097>; + required-opps = <&rpmhpd_opp_turbo>; + }; + }; + }; + + videocc: clock-controller@ab00000 { + compatible = "qcom,sc7180-videocc"; + reg = <0 0x0ab00000 0 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "bi_tcxo"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + camnoc_virt: interconnect@ac00000 { + compatible = "qcom,sc7180-camnoc-virt"; + reg = <0 0x0ac00000 0 0x1000>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + camcc: clock-controller@ad00000 { + compatible = "qcom,sc7180-camcc"; + reg = <0 0x0ad00000 0 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_CAMERA_AHB_CLK>, + <&gcc GCC_CAMERA_XO_CLK>; + clock-names = "bi_tcxo", "iface", "xo"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + mdss: mdss@ae00000 { + compatible = "qcom,sc7180-mdss"; + reg = <0 0x0ae00000 0 0x1000>; + reg-names = "mdss"; + + power-domains = <&dispcc MDSS_GDSC>; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "ahb", "core"; + + interrupts = ; + interrupt-controller; + #interrupt-cells = <1>; + + interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "mdp0-mem"; + + iommus = <&apps_smmu 0x800 0x2>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + mdp: display-controller@ae01000 { + compatible = "qcom,sc7180-dpu"; + reg = <0 0x0ae01000 0 0x8f000>, + <0 0x0aeb0000 0 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_ROT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", "iface", "rot", "lut", "core", + "vsync"; + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>, + <&dispcc DISP_CC_MDSS_ROT_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>; + assigned-clock-rates = <19200000>, + <19200000>, + <19200000>; + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd SC7180_CX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@2 { + reg = <2>; + dpu_intf0_out: endpoint { + remote-endpoint = <&dp_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-345000000 { + opp-hz = /bits/ 64 <345000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-460000000 { + opp-hz = /bits/ 64 <460000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + + }; + + dsi0: dsi@ae94000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae94000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi_phy 0>, <&dsi_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SC7180_CX>; + + phys = <&dsi_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + + dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + dsi_phy: dsi-phy@ae94400 { + compatible = "qcom,dsi-phy-10nm"; + reg = <0 0x0ae94400 0 0x200>, + <0 0x0ae94600 0 0x280>, + <0 0x0ae94a00 0 0x1e0>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + + mdss_dp: displayport-controller@ae90000 { + compatible = "qcom,sc7180-dp"; + status = "disabled"; + + reg = <0 0xae90000 0 0x200>, + <0 0xae90200 0 0x200>, + <0 0xae90400 0 0xc00>, + <0 0xae91000 0 0x400>, + <0 0xae91400 0 0x400>; + + interrupt-parent = <&mdss>; + interrupts = <12>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DP_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>; + clock-names = "core_iface", "core_aux", "ctrl_link", + "ctrl_link_iface", "stream_pixel"; + assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>; + assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>; + phys = <&dp_phy>; + phy-names = "dp"; + + operating-points-v2 = <&dp_opp_table>; + power-domains = <&rpmhpd SC7180_CX>; + + #sound-dai-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + dp_in: endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + dp_out: endpoint { }; + }; + }; + + dp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + }; + + dispcc: clock-controller@af00000 { + compatible = "qcom,sc7180-dispcc"; + reg = <0 0x0af00000 0 0x200000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_DISP_GPLL0_CLK_SRC>, + <&dsi_phy 0>, + <&dsi_phy 1>, + <&dp_phy 0>, + <&dp_phy 1>; + clock-names = "bi_tcxo", + "gcc_disp_gpll0_clk_src", + "dsi0_phy_pll_out_byteclk", + "dsi0_phy_pll_out_dsiclk", + "dp_phy_pll_link_clk", + "dp_phy_pll_vco_div_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,sc7180-pdc", "qcom,pdc"; + reg = <0 0x0b220000 0 0x30000>; + qcom,pdc-ranges = <0 480 94>, <94 609 31>, <125 63 1>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + pdc_reset: reset-controller@b2e0000 { + compatible = "qcom,sc7180-pdc-global", "qcom,sdm845-pdc-global"; + reg = <0 0x0b2e0000 0 0x20000>; + #reset-cells = <1>; + }; + + tsens0: thermal-sensor@c263000 { + compatible = "qcom,sc7180-tsens","qcom,tsens-v2"; + reg = <0 0x0c263000 0 0x1ff>, /* TM */ + <0 0x0c222000 0 0x1ff>; /* SROT */ + #qcom,sensors = <15>; + interrupts = , + ; + interrupt-names = "uplow","critical"; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c265000 { + compatible = "qcom,sc7180-tsens","qcom,tsens-v2"; + reg = <0 0x0c265000 0 0x1ff>, /* TM */ + <0 0x0c223000 0 0x1ff>; /* SROT */ + #qcom,sensors = <10>; + interrupts = , + ; + interrupt-names = "uplow","critical"; + #thermal-sensor-cells = <1>; + }; + + aoss_reset: reset-controller@c2a0000 { + compatible = "qcom,sc7180-aoss-cc", "qcom,sdm845-aoss-cc"; + reg = <0 0x0c2a0000 0 0x31000>; + #reset-cells = <1>; + }; + + aoss_qmp: power-controller@c300000 { + compatible = "qcom,sc7180-aoss-qmp", "qcom,aoss-qmp"; + reg = <0 0x0c300000 0 0x400>; + interrupts = ; + mboxes = <&apss_shared 0>; + + #clock-cells = <0>; + }; + + sram@c3f0000 { + compatible = "qcom,rpmh-stats"; + reg = <0 0x0c3f0000 0 0x400>; + }; + + spmi_bus: spmi@c440000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0 0x0c440000 0 0x1100>, + <0 0x0c600000 0 0x2000000>, + <0 0x0e600000 0 0x100000>, + <0 0x0e700000 0 0xa0000>, + <0 0x0c40a000 0 0x26000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + cell-index = <0>; + }; + + sram@146aa000 { + compatible = "qcom,sc7180-imem", "syscon", "simple-mfd"; + reg = <0 0x146aa000 0 0x2000>; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0 0 0x146aa000 0x2000>; + + pil-reloc@94c { + compatible = "qcom,pil-reloc-info"; + reg = <0x94c 0xc8>; + }; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,sc7180-smmu-500", "arm,mmu-500"; + reg = <0 0x15000000 0 0x100000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + }; + + intc: interrupt-controller@17a00000 { + compatible = "arm,gic-v3"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0 0x17a00000 0 0x10000>, /* GICD */ + <0 0x17a60000 0 0x100000>; /* GICR * 8 */ + interrupts = ; + + msi-controller@17a40000 { + compatible = "arm,gic-v3-its"; + msi-controller; + #msi-cells = <1>; + reg = <0 0x17a40000 0 0x20000>; + status = "disabled"; + }; + }; + + apss_shared: mailbox@17c00000 { + compatible = "qcom,sc7180-apss-shared"; + reg = <0 0x17c00000 0 0x10000>; + #mbox-cells = <1>; + }; + + watchdog@17c10000 { + compatible = "qcom,apss-wdt-sc7180", "qcom,kpss-wdt"; + reg = <0 0x17c10000 0 0x1000>; + clocks = <&sleep_clk>; + interrupts = ; + }; + + timer@17c20000{ + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0x20000000>; + compatible = "arm,armv7-timer-mem"; + reg = <0 0x17c20000 0 0x1000>; + + frame@17c21000 { + frame-number = <0>; + interrupts = , + ; + reg = <0x17c21000 0x1000>, + <0x17c22000 0x1000>; + }; + + frame@17c23000 { + frame-number = <1>; + interrupts = ; + reg = <0x17c23000 0x1000>; + status = "disabled"; + }; + + frame@17c25000 { + frame-number = <2>; + interrupts = ; + reg = <0x17c25000 0x1000>; + status = "disabled"; + }; + + frame@17c27000 { + frame-number = <3>; + interrupts = ; + reg = <0x17c27000 0x1000>; + status = "disabled"; + }; + + frame@17c29000 { + frame-number = <4>; + interrupts = ; + reg = <0x17c29000 0x1000>; + status = "disabled"; + }; + + frame@17c2b000 { + frame-number = <5>; + interrupts = ; + reg = <0x17c2b000 0x1000>; + status = "disabled"; + }; + + frame@17c2d000 { + frame-number = <6>; + interrupts = ; + reg = <0x17c2d000 0x1000>; + status = "disabled"; + }; + }; + + apps_rsc: rsc@18200000 { + compatible = "qcom,rpmh-rsc"; + reg = <0 0x18200000 0 0x10000>, + <0 0x18210000 0 0x10000>, + <0 0x18220000 0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = , + , + ; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = , + , + , + ; + + rpmhcc: clock-controller { + compatible = "qcom,sc7180-rpmh-clk"; + clocks = <&xo_board>; + clock-names = "xo"; + #clock-cells = <1>; + }; + + rpmhpd: power-controller { + compatible = "qcom,sc7180-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = ; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = ; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = ; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = ; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = ; + }; + + rpmhpd_opp_svs_l2: opp6 { + opp-level = <224>; + }; + + rpmhpd_opp_nom: opp7 { + opp-level = ; + }; + + rpmhpd_opp_nom_l1: opp8 { + opp-level = ; + }; + + rpmhpd_opp_nom_l2: opp9 { + opp-level = ; + }; + + rpmhpd_opp_turbo: opp10 { + opp-level = ; + }; + + rpmhpd_opp_turbo_l1: opp11 { + opp-level = ; + }; + }; + }; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + }; + + osm_l3: interconnect@18321000 { + compatible = "qcom,sc7180-osm-l3"; + reg = <0 0x18321000 0 0x1400>; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + + #interconnect-cells = <1>; + }; + + cpufreq_hw: cpufreq@18323000 { + compatible = "qcom,cpufreq-hw"; + reg = <0 0x18323000 0 0x1400>, <0 0x18325800 0 0x1400>; + reg-names = "freq-domain0", "freq-domain1"; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + + #freq-domain-cells = <1>; + }; + + wifi: wifi@18800000 { + compatible = "qcom,wcn3990-wifi"; + reg = <0 0x18800000 0 0x800000>; + reg-names = "membase"; + iommus = <&apps_smmu 0xc0 0x1>; + interrupts = + , + , + , + , + , + , + , + , + , + , + , + ; + memory-region = <&wlan_mem>; + qcom,msa-fixed-perm; + status = "disabled"; + }; + + lpasscc: clock-controller@62d00000 { + compatible = "qcom,sc7180-lpasscorecc"; + reg = <0 0x62d00000 0 0x50000>, + <0 0x62780000 0 0x30000>; + reg-names = "lpass_core_cc", "lpass_audio_cc"; + clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "bi_tcxo"; + power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>; + #clock-cells = <1>; + #power-domain-cells = <1>; + }; + + lpass_cpu: lpass@62d87000 { + compatible = "qcom,sc7180-lpass-cpu"; + + reg = <0 0x62d87000 0 0x68000>, <0 0x62f00000 0 0x29000>; + reg-names = "lpass-hdmiif", "lpass-lpaif"; + + iommus = <&apps_smmu 0x1020 0>, + <&apps_smmu 0x1021 0>, + <&apps_smmu 0x1032 0>; + + power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>; + + status = "disabled"; + + clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>, + <&lpasscc LPASS_AUDIO_CORE_CORE_CLK>, + <&lpasscc LPASS_AUDIO_CORE_EXT_MCLK0_CLK>, + <&lpasscc LPASS_AUDIO_CORE_SYSNOC_MPORT_CORE_CLK>, + <&lpasscc LPASS_AUDIO_CORE_LPAIF_PRI_IBIT_CLK>, + <&lpasscc LPASS_AUDIO_CORE_LPAIF_SEC_IBIT_CLK>; + + clock-names = "pcnoc-sway-clk", "audio-core", + "mclk0", "pcnoc-mport-clk", + "mi2s-bit-clk0", "mi2s-bit-clk1"; + + + #sound-dai-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + interrupts = , + ; + interrupt-names = "lpass-irq-lpaif", "lpass-irq-hdmi"; + }; + + lpass_hm: clock-controller@63000000 { + compatible = "qcom,sc7180-lpasshm"; + reg = <0 0x63000000 0 0x28>; + clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "bi_tcxo"; + #clock-cells = <1>; + #power-domain-cells = <1>; + }; + }; + + thermal-zones { + cpu0_thermal: cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 1>; + sustainable-power = <1052>; + + trips { + cpu0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu0_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu0_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu1_thermal: cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 2>; + sustainable-power = <1052>; + + trips { + cpu1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu1_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu1_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu2_thermal: cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 3>; + sustainable-power = <1052>; + + trips { + cpu2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu2_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu2_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu3_thermal: cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 4>; + sustainable-power = <1052>; + + trips { + cpu3_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu3_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu3_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu4_thermal: cpu4-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 5>; + sustainable-power = <1052>; + + trips { + cpu4_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu4_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu4_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu5_thermal: cpu5-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 6>; + sustainable-power = <1052>; + + trips { + cpu5_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu5_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu5_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu6_thermal: cpu6-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 9>; + sustainable-power = <1425>; + + trips { + cpu6_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu6_alert0>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu6_alert1>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu7_thermal: cpu7-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 10>; + sustainable-power = <1425>; + + trips { + cpu7_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu7_alert0>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu7_alert1>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu8_thermal: cpu8-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 11>; + sustainable-power = <1425>; + + trips { + cpu8_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu8_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu8_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu8_alert0>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu8_alert1>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu9_thermal: cpu9-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 12>; + sustainable-power = <1425>; + + trips { + cpu9_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu9_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu9_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu9_alert0>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu9_alert1>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + aoss0-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 0>; + + trips { + aoss0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + aoss0_crit: aoss0_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpuss0-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 7>; + + trips { + cpuss0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + cpuss0_crit: cluster0_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpuss1-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 8>; + + trips { + cpuss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + cpuss1_crit: cluster0_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + gpuss0-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 13>; + + trips { + gpuss0_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpuss0_crit: gpuss0_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&gpuss0_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + gpuss1-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 14>; + + trips { + gpuss1_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpuss1_crit: gpuss1_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&gpuss1_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + aoss1-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 0>; + + trips { + aoss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + aoss1_crit: aoss1_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cwlan-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 1>; + + trips { + cwlan_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + cwlan_crit: cwlan_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + audio-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 2>; + + trips { + audio_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + audio_crit: audio_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + ddr-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 3>; + + trips { + ddr_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + ddr_crit: ddr_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + q6-hvx-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 4>; + + trips { + q6_hvx_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + q6_hvx_crit: q6_hvx_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + camera-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 5>; + + trips { + camera_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + camera_crit: camera_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + mdm-core-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 6>; + + trips { + mdm_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + mdm_crit: mdm_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + mdm-dsp-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 7>; + + trips { + mdm_dsp_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + mdm_dsp_crit: mdm_dsp_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + npu-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 8>; + + trips { + npu_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + npu_crit: npu_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 9>; + + trips { + video_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + video_crit: video_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi new file mode 100644 index 000000000..efe6ea538 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi @@ -0,0 +1,126 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * sc7280 fragment for devices with Chrome bootloader + * + * This file mainly tries to abstract out the memory protections put into + * place by the Chrome bootloader which are different than what's put into + * place by Qualcomm's typical bootloader. It also has a smattering of other + * things that will hold true for any conceivable Chrome design + * + * Copyright 2022 Google LLC. + */ + +/* + * Reserved memory changes + * + * Delete all unused memory nodes and define the peripheral memory regions + * required by the setup for Chrome boards. + */ + +/delete-node/ &hyp_mem; +/delete-node/ &xbl_mem; +/delete-node/ &reserved_xbl_uefi_log; +/delete-node/ &sec_apps_mem; + +/ { + reserved-memory { + adsp_mem: memory@86700000 { + reg = <0x0 0x86700000 0x0 0x2800000>; + no-map; + }; + + camera_mem: memory@8ad00000 { + reg = <0x0 0x8ad00000 0x0 0x500000>; + no-map; + }; + + venus_mem: memory@8b200000 { + reg = <0x0 0x8b200000 0x0 0x500000>; + no-map; + }; + + mpss_mem: memory@8b800000 { + reg = <0x0 0x8b800000 0x0 0xf600000>; + no-map; + }; + + wpss_mem: memory@9ae00000 { + reg = <0x0 0x9ae00000 0x0 0x1900000>; + no-map; + }; + + mba_mem: memory@9c700000 { + reg = <0x0 0x9c700000 0x0 0x200000>; + no-map; + }; + }; +}; + +&lpass_aon { + status = "okay"; +}; + +&lpass_core { + status = "okay"; +}; + +&lpass_hm { + status = "okay"; +}; + +&lpasscc { + status = "okay"; +}; + +&pdc_reset { + status = "okay"; +}; + +/* The PMIC PON code isn't compatible w/ how Chrome EC/BIOS handle things. */ +&pmk8350_pon { + status = "disabled"; +}; + +/* + * Chrome designs always boot from SPI flash hooked up to the qspi. + * + * It's expected that all boards will support "dual SPI" at 37.5 MHz. + * If some boards need a different speed or have a package that allows + * Quad SPI together with WP then those boards can easily override. + */ +&qspi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data01>; + + spi_flash: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + + spi-max-frequency = <37500000>; + spi-tx-bus-width = <2>; + spi-rx-bus-width = <2>; + }; +}; + +&remoteproc_wpss { + status = "okay"; + firmware-name = "ath11k/WCN6750/hw1.0/wpss.mdt"; +}; + +/* Increase the size from 2.5MB to 8MB */ +&rmtfs_mem { + reg = <0x0 0x9c900000 0x0 0x800000>; +}; + +&watchdog { + status = "okay"; +}; + +&wifi { + status = "okay"; + + wifi-firmware { + iommus = <&apps_smmu 0x1c02 0x1>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts new file mode 100644 index 000000000..dddb505e2 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts @@ -0,0 +1,145 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * sc7280 CRD board device tree source + * + * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "sc7280-idp.dtsi" +#include "sc7280-idp-ec-h1.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. sc7280 CRD platform (rev3 - 4)"; + compatible = "qcom,sc7280-crd", + "google,hoglin-rev3", "google,hoglin-rev4", + "google,piglin-rev3", "google,piglin-rev4", + "qcom,sc7280"; + + aliases { + serial0 = &uart5; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&apps_rsc { + pmg1110-regulators { + compatible = "qcom,pmg1110-rpmh-regulators"; + qcom,pmic-id = "k"; + + vreg_s1k_1p0: smps1 { + regulator-min-microvolt = <1010000>; + regulator-max-microvolt = <1170000>; + }; + }; +}; + +ap_tp_i2c: &i2c0 { + status = "okay"; + clock-frequency = <400000>; + + trackpad: trackpad@15 { + compatible = "hid-over-i2c"; + reg = <0x15>; + pinctrl-names = "default"; + pinctrl-0 = <&tp_int_odl>; + + interrupt-parent = <&tlmm>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + + post-power-on-delay-ms = <20>; + hid-descr-addr = <0x0001>; + vdd-supply = <&vreg_l18b_1p8>; + + wakeup-source; + }; +}; + +ap_ts_pen_1v8: &i2c13 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@5c { + compatible = "hid-over-i2c"; + reg = <0x5c>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; + + interrupt-parent = <&tlmm>; + interrupts = <55 IRQ_TYPE_LEVEL_LOW>; + + post-power-on-delay-ms = <500>; + hid-descr-addr = <0x0000>; + + vdd-supply = <&vreg_l19b_1p8>; + }; +}; + +&nvme_3v3_regulator { + gpio = <&tlmm 51 GPIO_ACTIVE_HIGH>; +}; + +&nvme_pwren { + pins = "gpio51"; +}; + +&sound { + audio-routing = + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC1", "MIC BIAS1", + "AMIC2", "MIC BIAS2", + "VA DMIC0", "MIC BIAS1", + "VA DMIC1", "MIC BIAS1", + "VA DMIC2", "MIC BIAS3", + "VA DMIC3", "MIC BIAS3", + "TX SWR_ADC0", "ADC1_OUTPUT", + "TX SWR_ADC1", "ADC2_OUTPUT", + "TX SWR_ADC2", "ADC3_OUTPUT", + "TX SWR_DMIC0", "DMIC1_OUTPUT", + "TX SWR_DMIC1", "DMIC2_OUTPUT", + "TX SWR_DMIC2", "DMIC3_OUTPUT", + "TX SWR_DMIC3", "DMIC4_OUTPUT", + "TX SWR_DMIC4", "DMIC5_OUTPUT", + "TX SWR_DMIC5", "DMIC6_OUTPUT", + "TX SWR_DMIC6", "DMIC7_OUTPUT", + "TX SWR_DMIC7", "DMIC8_OUTPUT"; +}; + +&wcd9385 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&wcd_reset_n>, <&us_euro_hs_sel>; + pinctrl-1 = <&wcd_reset_n_sleep>, <&us_euro_hs_sel>; + us-euro-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>; +}; + +&tlmm { + tp_int_odl: tp-int-odl { + pins = "gpio7"; + function = "gpio"; + bias-disable; + }; + + ts_int_l: ts-int-l { + pins = "gpio55"; + function = "gpio"; + bias-pull-up; + }; + + ts_reset_l: ts-reset-l { + pins = "gpio54"; + function = "gpio"; + bias-disable; + }; + + us_euro_hs_sel: us-euro-hs-sel { + pins = "gpio81"; + function = "gpio"; + bias-pull-down; + drive-strength = <2>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi new file mode 100644 index 000000000..c72e53aaf --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi @@ -0,0 +1,239 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * sc7280 device tree source for boards using Max98360 and wcd9385 codec + * + * Copyright (c) 2022, The Linux Foundation. All rights reserved. + */ + +/ { + /* BOARD-SPECIFIC TOP LEVEL NODES */ + sound: sound { + compatible = "google,sc7280-herobrine"; + model = "sc7280-wcd938x-max98360a-1mic"; + + audio-routing = + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC1", "MIC BIAS1", + "AMIC2", "MIC BIAS2", + "VA DMIC0", "MIC BIAS1", + "VA DMIC1", "MIC BIAS1", + "VA DMIC2", "MIC BIAS3", + "VA DMIC3", "MIC BIAS3", + "TX SWR_ADC0", "ADC1_OUTPUT", + "TX SWR_ADC1", "ADC2_OUTPUT", + "TX SWR_ADC2", "ADC3_OUTPUT", + "TX SWR_DMIC0", "DMIC1_OUTPUT", + "TX SWR_DMIC1", "DMIC2_OUTPUT", + "TX SWR_DMIC2", "DMIC3_OUTPUT", + "TX SWR_DMIC3", "DMIC4_OUTPUT", + "TX SWR_DMIC4", "DMIC5_OUTPUT", + "TX SWR_DMIC5", "DMIC6_OUTPUT", + "TX SWR_DMIC6", "DMIC7_OUTPUT", + "TX SWR_DMIC7", "DMIC8_OUTPUT"; + + qcom,msm-mbhc-hphl-swh = <1>; + qcom,msm-mbhc-gnd-swh = <1>; + + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <0>; + + dai-link@0 { + link-name = "MAX98360A"; + reg = <0>; + + cpu { + sound-dai = <&lpass_cpu MI2S_SECONDARY>; + }; + + codec { + sound-dai = <&max98360a>; + }; + }; + + dai-link@1 { + link-name = "DisplayPort"; + reg = <1>; + + cpu { + sound-dai = <&lpass_cpu LPASS_DP_RX>; + }; + + codec { + sound-dai = <&mdss_dp>; + }; + }; + + dai-link@2 { + link-name = "WCD9385 Playback"; + reg = <2>; + + cpu { + sound-dai = <&lpass_cpu LPASS_CDC_DMA_RX0>; + }; + + codec { + sound-dai = <&wcd9385 0>, <&swr0 0>, <&lpass_rx_macro 0>; + }; + }; + + dai-link@3 { + link-name = "WCD9385 Capture"; + reg = <3>; + + cpu { + sound-dai = <&lpass_cpu LPASS_CDC_DMA_TX3>; + }; + + codec { + sound-dai = <&wcd9385 1>, <&swr1 0>, <&lpass_tx_macro 0>; + }; + }; + + dai-link@4 { + link-name = "DMIC"; + reg = <4>; + + cpu { + sound-dai = <&lpass_cpu LPASS_CDC_DMA_VA_TX0>; + }; + + codec { + sound-dai = <&lpass_va_macro 0>; + }; + }; + }; +}; + +/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ + +&lpass_cpu { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&mi2s1_data0>, <&mi2s1_sclk>, <&mi2s1_ws>; + + dai-link@1 { + reg = ; + qcom,playback-sd-lines = <0>; + }; + + dai-link@5 { + reg = ; + }; + + dai-link@6 { + reg = ; + }; + + dai-link@19 { + reg = ; + }; + + dai-link@25 { + reg = ; + }; +}; + +&lpass_rx_macro { + status = "okay"; +}; + +&lpass_tx_macro { + status = "okay"; +}; + +&lpass_va_macro { + status = "okay"; +}; + +&swr0 { + status = "okay"; +}; + +&swr1 { + status = "okay"; +}; + +&wcd9385 { + status = "okay"; +}; + +/* PINCTRL */ + +&lpass_dmic01_clk { + drive-strength = <8>; + bias-disable; +}; + +&lpass_dmic01_clk_sleep { + drive-strength = <2>; +}; + +&lpass_dmic01_data { + bias-pull-down; +}; + +&lpass_dmic23_clk { + drive-strength = <8>; + bias-disable; +}; + +&lpass_dmic23_clk_sleep { + drive-strength = <2>; +}; + +&lpass_dmic23_data { + bias-pull-down; +}; + +&lpass_rx_swr_clk { + drive-strength = <2>; + slew-rate = <1>; + bias-disable; +}; + +&lpass_rx_swr_clk_sleep { + bias-pull-down; +}; + +&lpass_rx_swr_data { + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; +}; + +&lpass_rx_swr_data_sleep { + bias-pull-down; +}; + +&lpass_tx_swr_clk { + drive-strength = <2>; + slew-rate = <1>; + bias-disable; +}; + +&lpass_tx_swr_clk_sleep { + bias-pull-down; +}; + +&lpass_tx_swr_data { + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; +}; + +&mi2s1_data0 { + drive-strength = <6>; + bias-disable; +}; + +&mi2s1_sclk { + drive-strength = <6>; + bias-disable; +}; + +&mi2s1_ws { + drive-strength = <6>; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts new file mode 100644 index 000000000..f0f26af1e --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts @@ -0,0 +1,376 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * sc7280 CRD 3+ board device tree source + * + * Copyright 2022 Google LLC. + */ + +/dts-v1/; + +#include "sc7280-herobrine.dtsi" +#include "sc7280-herobrine-audio-wcd9385.dtsi" +#include "sc7280-herobrine-lte-sku.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. sc7280 CRD platform (rev5+)"; + compatible = "google,zoglin", "google,hoglin", "qcom,sc7280"; + + /* FIXED REGULATORS */ + + /* + * On most herobrine boards PPVAR_SYS directly provides VREG_EDP_BL. + * However, on CRD there's an extra regulator in the way. Since this + * is expected to be uncommon, we'll leave the "vreg_edp_bl" label + * in the baseboard herobrine.dtsi point at "ppvar_sys" and then + * make a "_crd" specific version here. + */ + vreg_edp_bl_crd: vreg-edp-bl-crd-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_edp_bl_crd"; + + gpio = <&pm8350c_gpios 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&edp_bl_reg_en>; + + vin-supply = <&ppvar_sys>; + }; +}; + +/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ + +&apps_rsc { + pmg1110-regulators { + compatible = "qcom,pmg1110-rpmh-regulators"; + qcom,pmic-id = "k"; + + vreg_s1k_1p0: smps1 { + regulator-min-microvolt = <1010000>; + regulator-max-microvolt = <1170000>; + }; + }; +}; + +ap_tp_i2c: &i2c0 { + status = "okay"; + clock-frequency = <400000>; + + trackpad: trackpad@15 { + compatible = "hid-over-i2c"; + reg = <0x15>; + pinctrl-names = "default"; + pinctrl-0 = <&tp_int_odl>; + + interrupt-parent = <&tlmm>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + + post-power-on-delay-ms = <20>; + hid-descr-addr = <0x0001>; + vdd-supply = <&pp3300_z1>; + + wakeup-source; + }; +}; + +&ap_sar_sensor_i2c { + status = "okay"; +}; + +&ap_sar_sensor0 { + status = "okay"; +}; + +&ap_sar_sensor1 { + status = "okay"; +}; + +ap_ts_pen_1v8: &i2c13 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@5c { + compatible = "hid-over-i2c"; + reg = <0x5c>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_conn>, <&ts_rst_conn>; + + interrupt-parent = <&tlmm>; + interrupts = <55 IRQ_TYPE_LEVEL_LOW>; + + post-power-on-delay-ms = <500>; + hid-descr-addr = <0x0000>; + + vdd-supply = <&pp3300_left_in_mlb>; + }; +}; + +&mdss_edp { + status = "okay"; +}; + +&mdss_edp_phy { + status = "okay"; +}; + +/* For nvme */ +&pcie1 { + status = "okay"; +}; + +/* For nvme */ +&pcie1_phy { + status = "okay"; +}; + +&pm8350c_pwm_backlight { + power-supply = <&vreg_edp_bl_crd>; +}; + +/* For eMMC */ +&sdhc_1 { + status = "okay"; +}; + +/* For SD Card */ +&sdhc_2 { + status = "okay"; +}; + +/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */ + +/* + * This pin goes to the display panel but then doesn't actually do anything + * on the panel itself (it doesn't connect to the touchscreen controller). + * We'll set a pullup here just to park the line. + */ +&ts_rst_conn { + bias-pull-up; +}; + +/* PINCTRL - BOARD-SPECIFIC */ + +/* + * Methodology for gpio-line-names: + * - If a pin goes to CRD board and is named it gets that name. + * - If a pin goes to CRD board and is not named, it gets no name. + * - If a pin is totally internal to Qcard then it gets Qcard name. + * - If a pin is not hooked up on Qcard, it gets no name. + */ + +&pm8350c_gpios { + gpio-line-names = "FLASH_STROBE_1", /* 1 */ + "AP_SUSPEND", + "PM8008_1_RST_N", + "", + "", + "EDP_BL_REG_EN", + "PMIC_EDP_BL_EN", + "PMIC_EDP_BL_PWM", + ""; + + edp_bl_reg_en: edp-bl-reg-en-state { + pins = "gpio6"; + function = "normal"; + bias-disable; + qcom,drive-strength = ; + }; +}; + +&tlmm { + gpio-line-names = "AP_TP_I2C_SDA", /* 0 */ + "AP_TP_I2C_SCL", + "PCIE1_RESET_N", + "PCIE1_WAKE_N", + "APPS_I2C_SDA", + "APPS_I2C_SCL", + "", + "TPAD_INT_N", + "", + "", + + "GNSS_L1_EN", /* 10 */ + "GNSS_L5_EN", + "QSPI_DATA_0", + "QSPI_DATA_1", + "QSPI_CLK", + "QSPI_CS_N_1", + /* + * AP_FLASH_WP is crossystem ABI. Schematics call it + * BIOS_FLASH_WP_L (the '_L' suffix is misleading, the + * signal is active high). + */ + "AP_FLASH_WP", + "", + "AP_EC_INT_N", + "", + + "CAM0_RST_N", /* 20 */ + "CAM1_RST_N", + "SM_DBG_UART_TX", + "SM_DBG_UART_RX", + "", + "PM8008_IRQ_1", + "HOST2WLAN_SOL", + "WLAN2HOST_SOL", + "MOS_BT_UART_CTS", + "MOS_BT_UART_RFR", + + "MOS_BT_UART_TX", /* 30 */ + "MOS_BT_UART_RX", + "", + "HUB_RST", + "", + "", + "", + "", + "", + "", + + "EC_SPI_MISO_GPIO40", /* 40 */ + "EC_SPI_MOSI_GPIO41", + "EC_SPI_CLK_GPIO42", + "EC_SPI_CS_GPIO43", + "", + "EARLY_EUD_EN", + "", + "DP_HOT_PLUG_DETECT", + "AP_BRD_ID_0", + "AP_BRD_ID_1", + + "AP_BRD_ID_2", /* 50 */ + "NVME_PWR_REG_EN", + "TS_I2C_SDA_CONN", + "TS_I2C_CLK_CONN", + "TS_RST_CONN", + "TS_INT_CONN", + "AP_I2C_TPM_SDA", + "AP_I2C_TPM_SCL", + "", + "", + + "EDP_HOT_PLUG_DET_N", /* 60 */ + "", + "", + "AMP_EN", + "CAM0_MCLK_GPIO_64", + "CAM1_MCLK_GPIO_65", + "", + "", + "", + "CCI_I2C_SDA0", + + "CCI_I2C_SCL0", /* 70 */ + "", + "", + "", + "", + "", + "", + "", + "", + "PCIE1_CLK_REQ_N", + + "EN_PP3300_DX_EDP", /* 80 */ + "US_EURO_HS_SEL", + "FORCED_USB_BOOT", + "WCD_RESET_N", + "MOS_WLAN_EN", + "MOS_BT_EN", + "MOS_SW_CTRL", + "MOS_PCIE0_RST", + "MOS_PCIE0_CLKREQ_N", + "MOS_PCIE0_WAKE_N", + + "MOS_LAA_AS_EN", /* 90 */ + "SD_CARD_DET_CONN", + "", + "", + "MOS_BT_WLAN_SLIMBUS_CLK", + "MOS_BT_WLAN_SLIMBUS_DAT0", + "", + "", + "", + "", + + "", /* 100 */ + "", + "", + "", + "H1_AP_INT_N", + "", + "AMP_BCLK", + "AMP_DIN", + "AMP_LRCLK", + "UIM1_DATA_GPIO_109", + + "UIM1_CLK_GPIO_110", /* 110 */ + "UIM1_RESET_GPIO_111", + "", + "UIM1_DATA", + "UIM1_CLK", + "UIM1_RESET", + "UIM1_PRESENT", + "SDM_RFFE0_CLK", + "SDM_RFFE0_DATA", + "", + + "SDM_RFFE1_DATA", /* 120 */ + "SC_GPIO_121", + "FASTBOOT_SEL_1", + "SC_GPIO_123", + "FASTBOOT_SEL_2", + "SM_RFFE4_CLK_GRFC_8", + "SM_RFFE4_DATA_GRFC_9", + "WLAN_COEX_UART1_RX", + "WLAN_COEX_UART1_TX", + "", + + "", /* 130 */ + "", + "", + "SDR_QLINK_REQ", + "SDR_QLINK_EN", + "QLINK0_WMSS_RESET_N", + "SMR526_QLINK1_REQ", + "SMR526_QLINK1_EN", + "SMR526_QLINK1_WMSS_RESET_N", + "", + + "SAR1_INT_N", /* 140 */ + "SAR0_INT_N", + "", + "", + "WCD_SWR_TX_CLK", + "WCD_SWR_TX_DATA0", + "WCD_SWR_TX_DATA1", + "WCD_SWR_RX_CLK", + "WCD_SWR_RX_DATA0", + "WCD_SWR_RX_DATA1", + + "DMIC01_CLK", /* 150 */ + "DMIC01_DATA", + "DMIC23_CLK", + "DMIC23_DATA", + "", + "", + "EC_IN_RW_N", + "EN_PP3300_HUB", + "WCD_SWR_TX_DATA2", + "", + + "", /* 160 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + + "", /* 170 */ + "MOS_BLE_UART_TX", + "MOS_BLE_UART_RX", + ""; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-r0.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-r0.dts new file mode 100644 index 000000000..ccbe50b62 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-r0.dts @@ -0,0 +1,333 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Evoker board device tree source + * + * Copyright 2022 Google LLC. + */ + +/dts-v1/; + +#include "sc7280-herobrine.dtsi" + +/ { + model = "Google Evoker"; + compatible = "google,evoker", "qcom,sc7280"; +}; + +/* + * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES + * + * Sort order matches the order in the parent files (parents before children). + */ + +&pp3300_codec { + status = "okay"; +}; + +/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ + +ap_tp_i2c: &i2c0 { + status = "okay"; + clock-frequency = <400000>; + + trackpad: trackpad@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + pinctrl-names = "default"; + pinctrl-0 = <&tp_int_odl>; + + interrupt-parent = <&tlmm>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + + hid-descr-addr = <0x20>; + vcc-supply = <&pp3300_z1>; + + wakeup-source; + }; +}; + +ts_i2c: &i2c13 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@10 { + compatible = "elan,ekth6915"; + reg = <0x10>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_conn>, <&ts_rst_conn>; + + interrupt-parent = <&tlmm>; + interrupts = <55 IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>; + + vcc33-supply = <&ts_avdd>; + }; +}; + +&ap_sar_sensor_i2c { + status = "okay"; +}; + +&ap_sar_sensor0 { + status = "okay"; +}; + +&ap_sar_sensor1 { + status = "okay"; +}; + +&mdss_edp { + status = "okay"; +}; + +&mdss_edp_phy { + status = "okay"; +}; + +/* For nvme */ +&pcie1 { + status = "okay"; +}; + +/* For nvme */ +&pcie1_phy { + status = "okay"; +}; + +&pwmleds { + status = "okay"; +}; + +/* For eMMC */ +&sdhc_1 { + status = "okay"; +}; + +/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */ + +&ts_rst_conn { + bias-disable; +}; + +/* PINCTRL - BOARD-SPECIFIC */ + +/* + * Methodology for gpio-line-names: + * - If a pin goes to herobrine board and is named it gets that name. + * - If a pin goes to herobrine board and is not named, it gets no name. + * - If a pin is totally internal to Qcard then it gets Qcard name. + * - If a pin is not hooked up on Qcard, it gets no name. + */ + +&pm8350c_gpios { + gpio-line-names = "FLASH_STROBE_1", /* 1 */ + "AP_SUSPEND", + "PM8008_1_RST_N", + "", + "", + "", + "PMIC_EDP_BL_EN", + "PMIC_EDP_BL_PWM", + ""; +}; + +&tlmm { + gpio-line-names = "AP_TP_I2C_SDA", /* 0 */ + "AP_TP_I2C_SCL", + "SSD_RST_L", + "PE_WAKE_ODL", + "AP_SAR_SDA", + "AP_SAR_SCL", + "PRB_SC_GPIO_6", + "TP_INT_ODL", + "HP_I2C_SDA", + "HP_I2C_SCL", + + "GNSS_L1_EN", /* 10 */ + "GNSS_L5_EN", + "SPI_AP_MOSI", + "SPI_AP_MISO", + "SPI_AP_CLK", + "SPI_AP_CS0_L", + /* + * AP_FLASH_WP is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_OD. + */ + "AP_FLASH_WP", + "", + "AP_EC_INT_L", + "", + + "UF_CAM_RST_L", /* 20 */ + "WF_CAM_RST_L", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "", + "PM8008_IRQ_1", + "HOST2WLAN_SOL", + "WLAN2HOST_SOL", + "MOS_BT_UART_CTS", + "MOS_BT_UART_RFR", + + "MOS_BT_UART_TX", /* 30 */ + "MOS_BT_UART_RX", + "PRB_SC_GPIO_32", + "HUB_RST_L", + "", + "", + "AP_SPI_FP_MISO", + "AP_SPI_FP_MOSI", + "AP_SPI_FP_CLK", + "AP_SPI_FP_CS_L", + + "AP_EC_SPI_MISO", /* 40 */ + "AP_EC_SPI_MOSI", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "LCM_RST_L", + "EARLY_EUD_N", + "", + "DP_HOT_PLUG_DET", + "IO_BRD_MLB_ID0", + "IO_BRD_MLB_ID1", + + "IO_BRD_MLB_ID2", /* 50 */ + "SSD_EN", + "TS_I2C_SDA_CONN", + "TS_I2C_CLK_CONN", + "TS_RST_CONN", + "TS_INT_CONN", + "AP_I2C_TPM_SDA", + "AP_I2C_TPM_SCL", + "PRB_SC_GPIO_58", + "PRB_SC_GPIO_59", + + "EDP_HOT_PLUG_DET_N", /* 60 */ + "FP_TO_AP_IRQ_L", + "", + "AMP_EN", + "CAM0_MCLK_GPIO_64", + "CAM1_MCLK_GPIO_65", + "WF_CAM_MCLK", + "PRB_SC_GPIO_67", + "FPMCU_BOOT0", + "UF_CAM_SDA", + + "UF_CAM_SCL", /* 70 */ + "", + "", + "WF_CAM_SDA", + "WF_CAM_SCL", + "", + "", + "EN_FP_RAILS", + "FP_RST_L", + "PCIE1_CLKREQ_ODL", + + "EN_PP3300_DX_EDP", /* 80 */ + "SC_GPIO_81", + "FORCED_USB_BOOT", + "WCD_RESET_N", + "MOS_WLAN_EN", + "MOS_BT_EN", + "MOS_SW_CTRL", + "MOS_PCIE0_RST", + "MOS_PCIE0_CLKREQ_N", + "MOS_PCIE0_WAKE_N", + + "MOS_LAA_AS_EN", /* 90 */ + "SD_CD_ODL", + "", + "", + "MOS_BT_WLAN_SLIMBUS_CLK", + "MOS_BT_WLAN_SLIMBUS_DAT0", + "HP_MCLK", + "HP_BCLK", + "HP_DOUT", + "HP_DIN", + + "HP_LRCLK", /* 100 */ + "HP_IRQ", + "", + "", + "GSC_AP_INT_ODL", + "EN_PP3300_CODEC", + "AMP_BCLK", + "AMP_DIN", + "AMP_LRCLK", + "UIM1_DATA_GPIO_109", + + "UIM1_CLK_GPIO_110", /* 110 */ + "UIM1_RESET_GPIO_111", + "PRB_SC_GPIO_112", + "UIM0_DATA", + "UIM0_CLK", + "UIM0_RST", + "UIM0_PRESENT_ODL", + "SDM_RFFE0_CLK", + "SDM_RFFE0_DATA", + "WF_CAM_EN", + + "FASTBOOT_SEL_0", /* 120 */ + "SC_GPIO_121", + "FASTBOOT_SEL_1", + "SC_GPIO_123", + "FASTBOOT_SEL_2", + "SM_RFFE4_CLK_GRFC_8", + "SM_RFFE4_DATA_GRFC_9", + "WLAN_COEX_UART1_RX", + "WLAN_COEX_UART1_TX", + "PRB_SC_GPIO_129", + + "LCM_ID0", /* 130 */ + "LCM_ID1", + "", + "SDR_QLINK_REQ", + "SDR_QLINK_EN", + "QLINK0_WMSS_RESET_N", + "SMR526_QLINK1_REQ", + "SMR526_QLINK1_EN", + "SMR526_QLINK1_WMSS_RESET_N", + "PRB_SC_GPIO_139", + + "SAR1_IRQ_ODL", /* 140 */ + "SAR0_IRQ_ODL", + "PRB_SC_GPIO_142", + "", + "WCD_SWR_TX_CLK", + "WCD_SWR_TX_DATA0", + "WCD_SWR_TX_DATA1", + "WCD_SWR_RX_CLK", + "WCD_SWR_RX_DATA0", + "WCD_SWR_RX_DATA1", + + "DMIC01_CLK", /* 150 */ + "DMIC01_DATA", + "DMIC23_CLK", + "DMIC23_DATA", + "", + "", + "EC_IN_RW_ODL", + "HUB_EN", + "WCD_SWR_TX_DATA2", + "", + + "", /* 160 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + + "", /* 170 */ + "MOS_BLE_UART_TX", + "MOS_BLE_UART_RX", + "", + "", + ""; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts new file mode 100644 index 000000000..c1a671968 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts @@ -0,0 +1,363 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Herobrine board device tree source + * + * Copyright 2022 Google LLC. + */ + +/dts-v1/; + +#include "sc7280-herobrine.dtsi" +#include "sc7280-herobrine-lte-sku.dtsi" + +/ { + model = "Google Herobrine (rev1+)"; + compatible = "google,herobrine", "qcom,sc7280"; +}; + +/* + * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES + * + * Sort order matches the order in the parent files (parents before children). + */ + +&pp3300_codec { + status = "okay"; +}; + +&pp3300_fp_mcu { + status = "okay"; +}; + +&pp2850_vcm_wf_cam { + status = "okay"; +}; + +&pp2850_wf_cam { + status = "okay"; +}; + +&pp1800_wf_cam { + status = "okay"; +}; + +&pp1200_wf_cam { + status = "okay"; +}; + +/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ + +&ap_spi_fp { + status = "okay"; +}; + +/* + * Although the trackpad is really part of the herobrine baseboard, we'll + * put the actual definition in the board device tree since different boards + * might hook up different trackpads (or no i2c trackpad at all in the case + * of tablets / detachables). + */ +ap_tp_i2c: &i2c0 { + status = "okay"; + clock-frequency = <400000>; + + trackpad: trackpad@15 { + compatible = "elan,ekth3000"; + reg = <0x15>; + pinctrl-names = "default"; + pinctrl-0 = <&tp_int_odl>; + + interrupt-parent = <&tlmm>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + + vcc-supply = <&pp3300_z1>; + + wakeup-source; + }; +}; + +/* + * The touchscreen connector might come off the Qcard, at least in the case of + * eDP. Like the trackpad, we'll put it in the board device tree file since + * different boards have different touchscreens. + */ +ts_i2c: &i2c13 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@5c { + compatible = "hid-over-i2c"; + reg = <0x5c>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_conn>, <&ts_rst_conn>; + + interrupt-parent = <&tlmm>; + interrupts = <55 IRQ_TYPE_LEVEL_LOW>; + + post-power-on-delay-ms = <500>; + hid-descr-addr = <0x0000>; + + vdd-supply = <&ts_avdd>; + }; +}; + +&mdss_edp { + status = "okay"; +}; + +&mdss_edp_phy { + status = "okay"; +}; + +/* For nvme */ +&pcie1 { + status = "okay"; +}; + +/* For nvme */ +&pcie1_phy { + status = "okay"; +}; + +/* For eMMC */ +&sdhc_1 { + status = "okay"; +}; + +/* For SD Card */ +&sdhc_2 { + status = "okay"; +}; + +/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */ + +/* + * This pin goes to the display panel but then doesn't actually do anything + * on the panel itself (it doesn't connect to the touchscreen controller). + * We'll set a pullup here just to park the line. + */ +&ts_rst_conn { + bias-pull-up; +}; + +/* PINCTRL - BOARD-SPECIFIC */ + +/* + * Methodology for gpio-line-names: + * - If a pin goes to herobrine board and is named it gets that name. + * - If a pin goes to herobrine board and is not named, it gets no name. + * - If a pin is totally internal to Qcard then it gets Qcard name. + * - If a pin is not hooked up on Qcard, it gets no name. + */ + +&pm8350c_gpios { + gpio-line-names = "FLASH_STROBE_1", /* 1 */ + "AP_SUSPEND", + "PM8008_1_RST_N", + "", + "", + "", + "PMIC_EDP_BL_EN", + "PMIC_EDP_BL_PWM", + ""; +}; + +&tlmm { + gpio-line-names = "AP_TP_I2C_SDA", /* 0 */ + "AP_TP_I2C_SCL", + "SSD_RST_L", + "PE_WAKE_ODL", + "AP_SAR_SDA", + "AP_SAR_SCL", + "PRB_SC_GPIO_6", + "TP_INT_ODL", + "HP_I2C_SDA", + "HP_I2C_SCL", + + "GNSS_L1_EN", /* 10 */ + "GNSS_L5_EN", + "SPI_AP_MOSI", + "SPI_AP_MISO", + "SPI_AP_CLK", + "SPI_AP_CS0_L", + /* + * AP_FLASH_WP is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_OD. + */ + "AP_FLASH_WP", + "", + "AP_EC_INT_L", + "", + + "UF_CAM_RST_L", /* 20 */ + "WF_CAM_RST_L", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "", + "PM8008_IRQ_1", + "HOST2WLAN_SOL", + "WLAN2HOST_SOL", + "MOS_BT_UART_CTS", + "MOS_BT_UART_RFR", + + "MOS_BT_UART_TX", /* 30 */ + "MOS_BT_UART_RX", + "PRB_SC_GPIO_32", + "HUB_RST_L", + "", + "", + "AP_SPI_FP_MISO", + "AP_SPI_FP_MOSI", + "AP_SPI_FP_CLK", + "AP_SPI_FP_CS_L", + + "AP_EC_SPI_MISO", /* 40 */ + "AP_EC_SPI_MOSI", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "LCM_RST_L", + "EARLY_EUD_N", + "", + "DP_HOT_PLUG_DET", + "IO_BRD_MLB_ID0", + "IO_BRD_MLB_ID1", + + "IO_BRD_MLB_ID2", /* 50 */ + "SSD_EN", + "TS_I2C_SDA_CONN", + "TS_I2C_CLK_CONN", + "TS_RST_CONN", + "TS_INT_CONN", + "AP_I2C_TPM_SDA", + "AP_I2C_TPM_SCL", + "PRB_SC_GPIO_58", + "PRB_SC_GPIO_59", + + "EDP_HOT_PLUG_DET_N", /* 60 */ + "FP_TO_AP_IRQ_L", + "", + "AMP_EN", + "CAM0_MCLK_GPIO_64", + "CAM1_MCLK_GPIO_65", + "WF_CAM_MCLK", + "PRB_SC_GPIO_67", + "FPMCU_BOOT0", + "UF_CAM_SDA", + + "UF_CAM_SCL", /* 70 */ + "", + "", + "WF_CAM_SDA", + "WF_CAM_SCL", + "", + "", + "EN_FP_RAILS", + "FP_RST_L", + "PCIE1_CLKREQ_ODL", + + "EN_PP3300_DX_EDP", /* 80 */ + "SC_GPIO_81", + "FORCED_USB_BOOT", + "WCD_RESET_N", + "MOS_WLAN_EN", + "MOS_BT_EN", + "MOS_SW_CTRL", + "MOS_PCIE0_RST", + "MOS_PCIE0_CLKREQ_N", + "MOS_PCIE0_WAKE_N", + + "MOS_LAA_AS_EN", /* 90 */ + "SD_CD_ODL", + "", + "", + "MOS_BT_WLAN_SLIMBUS_CLK", + "MOS_BT_WLAN_SLIMBUS_DAT0", + "HP_MCLK", + "HP_BCLK", + "HP_DOUT", + "HP_DIN", + + "HP_LRCLK", /* 100 */ + "HP_IRQ", + "", + "", + "GSC_AP_INT_ODL", + "EN_PP3300_CODEC", + "AMP_BCLK", + "AMP_DIN", + "AMP_LRCLK", + "UIM1_DATA_GPIO_109", + + "UIM1_CLK_GPIO_110", /* 110 */ + "UIM1_RESET_GPIO_111", + "PRB_SC_GPIO_112", + "UIM0_DATA", + "UIM0_CLK", + "UIM0_RST", + "UIM0_PRESENT_ODL", + "SDM_RFFE0_CLK", + "SDM_RFFE0_DATA", + "WF_CAM_EN", + + "FASTBOOT_SEL_0", /* 120 */ + "SC_GPIO_121", + "FASTBOOT_SEL_1", + "SC_GPIO_123", + "FASTBOOT_SEL_2", + "SM_RFFE4_CLK_GRFC_8", + "SM_RFFE4_DATA_GRFC_9", + "WLAN_COEX_UART1_RX", + "WLAN_COEX_UART1_TX", + "PRB_SC_GPIO_129", + + "LCM_ID0", /* 130 */ + "LCM_ID1", + "", + "SDR_QLINK_REQ", + "SDR_QLINK_EN", + "QLINK0_WMSS_RESET_N", + "SMR526_QLINK1_REQ", + "SMR526_QLINK1_EN", + "SMR526_QLINK1_WMSS_RESET_N", + "PRB_SC_GPIO_139", + + "SAR1_IRQ_ODL", /* 140 */ + "SAR0_IRQ_ODL", + "PRB_SC_GPIO_142", + "", + "WCD_SWR_TX_CLK", + "WCD_SWR_TX_DATA0", + "WCD_SWR_TX_DATA1", + "WCD_SWR_RX_CLK", + "WCD_SWR_RX_DATA0", + "WCD_SWR_RX_DATA1", + + "DMIC01_CLK", /* 150 */ + "DMIC01_DATA", + "DMIC23_CLK", + "DMIC23_DATA", + "", + "", + "EC_IN_RW_ODL", + "HUB_EN", + "WCD_SWR_TX_DATA2", + "", + + "", /* 160 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + + "", /* 170 */ + "MOS_BLE_UART_TX", + "MOS_BLE_UART_RX", + "", + "", + ""; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi new file mode 100644 index 000000000..a92eeccd2 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Herobrine dts fragment for LTE SKUs + * + * Copyright 2022 Google LLC. + */ +/* Modem setup is different on Chrome setups than typical Qualcomm setup */ + +&remoteproc_mpss { + compatible = "qcom,sc7280-mss-pil"; + iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>; + interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>; + memory-region = <&mba_mem>, <&mpss_mem>; + firmware-name = "qcom/sc7280-herobrine/modem/mba.mbn", + "qcom/sc7280-herobrine/modem/qdsp6sw.mbn"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts new file mode 100644 index 000000000..73e24cc55 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Villager board device tree source + * + * Copyright 2022 Google LLC. + */ + +/dts-v1/; + +#include "sc7280-herobrine-villager.dtsi" +#include "sc7280-herobrine-lte-sku.dtsi" + +/ { + model = "Google Villager (rev0)"; + compatible = "google,villager-rev0", "qcom,sc7280"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts new file mode 100644 index 000000000..f1017809e --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Villager board device tree source + * + * Copyright 2022 Google LLC. + */ + +#include "sc7280-herobrine-villager-r1.dts" +#include "sc7280-herobrine-lte-sku.dtsi" + +/ { + model = "Google Villager (rev1+) with LTE"; + compatible = "google,villager-sku512", "qcom,sc7280"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts new file mode 100644 index 000000000..cfc648726 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts @@ -0,0 +1,43 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Villager board device tree source + * + * Copyright 2022 Google LLC. + */ + +/dts-v1/; + +#include "sc7280-herobrine-villager.dtsi" +#include "sc7280-herobrine-audio-wcd9385.dtsi" + +/ { + model = "Google Villager (rev1+)"; + compatible = "google,villager", "qcom,sc7280"; +}; + +&lpass_va_macro { + vdd-micb-supply = <&pp1800_l2c>; +}; + +&sound { + audio-routing = + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC1", "MIC BIAS1", + "AMIC2", "MIC BIAS2", + "VA DMIC0", "vdd-micb", + "VA DMIC1", "vdd-micb", + "VA DMIC2", "vdd-micb", + "VA DMIC3", "vdd-micb", + "TX SWR_ADC0", "ADC1_OUTPUT", + "TX SWR_ADC1", "ADC2_OUTPUT", + "TX SWR_ADC2", "ADC3_OUTPUT", + "TX SWR_DMIC0", "DMIC1_OUTPUT", + "TX SWR_DMIC1", "DMIC2_OUTPUT", + "TX SWR_DMIC2", "DMIC3_OUTPUT", + "TX SWR_DMIC3", "DMIC4_OUTPUT", + "TX SWR_DMIC4", "DMIC5_OUTPUT", + "TX SWR_DMIC5", "DMIC6_OUTPUT", + "TX SWR_DMIC6", "DMIC7_OUTPUT", + "TX SWR_DMIC7", "DMIC8_OUTPUT"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi new file mode 100644 index 000000000..8f5d82885 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi @@ -0,0 +1,326 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Villager board device tree source + * + * Copyright 2022 Google LLC. + */ + +#include "sc7280-herobrine.dtsi" + +/* + * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES + * + * Sort order matches the order in the parent files (parents before children). + */ + +&pp3300_codec { + status = "okay"; +}; + +/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ + +ap_tp_i2c: &i2c0 { + status = "okay"; + clock-frequency = <400000>; + + trackpad: trackpad@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + pinctrl-names = "default"; + pinctrl-0 = <&tp_int_odl>; + + interrupt-parent = <&tlmm>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + + hid-descr-addr = <0x20>; + vdd-supply = <&pp3300_z1>; + + wakeup-source; + }; +}; + +ts_i2c: &i2c13 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@10 { + compatible = "elan,ekth6915"; + reg = <0x10>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_conn>, <&ts_rst_conn>; + + interrupt-parent = <&tlmm>; + interrupts = <55 IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>; + + vcc33-supply = <&ts_avdd>; + }; +}; + +&ap_sar_sensor_i2c { + status = "okay"; +}; + +&ap_sar_sensor0 { + status = "okay"; +}; + +&ap_sar_sensor1 { + status = "okay"; +}; + +&mdss_edp { + status = "okay"; +}; + +&mdss_edp_phy { + status = "okay"; +}; + +/* For nvme */ +&pcie1 { + status = "okay"; +}; + +/* For nvme */ +&pcie1_phy { + status = "okay"; +}; + +&pwmleds { + status = "okay"; +}; + +/* For eMMC */ +&sdhc_1 { + status = "okay"; +}; + +/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */ + +&ts_rst_conn { + bias-disable; +}; + +/* PINCTRL - BOARD-SPECIFIC */ + +/* + * Methodology for gpio-line-names: + * - If a pin goes to herobrine board and is named it gets that name. + * - If a pin goes to herobrine board and is not named, it gets no name. + * - If a pin is totally internal to Qcard then it gets Qcard name. + * - If a pin is not hooked up on Qcard, it gets no name. + */ + +&pm8350c_gpios { + gpio-line-names = "FLASH_STROBE_1", /* 1 */ + "AP_SUSPEND", + "PM8008_1_RST_N", + "", + "", + "", + "PMIC_EDP_BL_EN", + "PMIC_EDP_BL_PWM", + ""; +}; + +&tlmm { + gpio-line-names = "AP_TP_I2C_SDA", /* 0 */ + "AP_TP_I2C_SCL", + "SSD_RST_L", + "PE_WAKE_ODL", + "AP_SAR_SDA", + "AP_SAR_SCL", + "PRB_SC_GPIO_6", + "TP_INT_ODL", + "HP_I2C_SDA", + "HP_I2C_SCL", + + "GNSS_L1_EN", /* 10 */ + "GNSS_L5_EN", + "SPI_AP_MOSI", + "SPI_AP_MISO", + "SPI_AP_CLK", + "SPI_AP_CS0_L", + /* + * AP_FLASH_WP is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_OD. + */ + "AP_FLASH_WP", + "", + "AP_EC_INT_L", + "", + + "UF_CAM_RST_L", /* 20 */ + "WF_CAM_RST_L", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "", + "PM8008_IRQ_1", + "HOST2WLAN_SOL", + "WLAN2HOST_SOL", + "MOS_BT_UART_CTS", + "MOS_BT_UART_RFR", + + "MOS_BT_UART_TX", /* 30 */ + "MOS_BT_UART_RX", + "PRB_SC_GPIO_32", + "HUB_RST_L", + "", + "", + "AP_SPI_FP_MISO", + "AP_SPI_FP_MOSI", + "AP_SPI_FP_CLK", + "AP_SPI_FP_CS_L", + + "AP_EC_SPI_MISO", /* 40 */ + "AP_EC_SPI_MOSI", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "LCM_RST_L", + "EARLY_EUD_N", + "", + "DP_HOT_PLUG_DET", + "IO_BRD_MLB_ID0", + "IO_BRD_MLB_ID1", + + "IO_BRD_MLB_ID2", /* 50 */ + "SSD_EN", + "TS_I2C_SDA_CONN", + "TS_I2C_CLK_CONN", + "TS_RST_CONN", + "TS_INT_CONN", + "AP_I2C_TPM_SDA", + "AP_I2C_TPM_SCL", + "PRB_SC_GPIO_58", + "PRB_SC_GPIO_59", + + "EDP_HOT_PLUG_DET_N", /* 60 */ + "FP_TO_AP_IRQ_L", + "", + "AMP_EN", + "CAM0_MCLK_GPIO_64", + "CAM1_MCLK_GPIO_65", + "WF_CAM_MCLK", + "PRB_SC_GPIO_67", + "FPMCU_BOOT0", + "UF_CAM_SDA", + + "UF_CAM_SCL", /* 70 */ + "", + "", + "WF_CAM_SDA", + "WF_CAM_SCL", + "", + "", + "EN_FP_RAILS", + "FP_RST_L", + "PCIE1_CLKREQ_ODL", + + "EN_PP3300_DX_EDP", /* 80 */ + "SC_GPIO_81", + "FORCED_USB_BOOT", + "WCD_RESET_N", + "MOS_WLAN_EN", + "MOS_BT_EN", + "MOS_SW_CTRL", + "MOS_PCIE0_RST", + "MOS_PCIE0_CLKREQ_N", + "MOS_PCIE0_WAKE_N", + + "MOS_LAA_AS_EN", /* 90 */ + "SD_CD_ODL", + "", + "", + "MOS_BT_WLAN_SLIMBUS_CLK", + "MOS_BT_WLAN_SLIMBUS_DAT0", + "HP_MCLK", + "HP_BCLK", + "HP_DOUT", + "HP_DIN", + + "HP_LRCLK", /* 100 */ + "HP_IRQ", + "", + "", + "GSC_AP_INT_ODL", + "EN_PP3300_CODEC", + "AMP_BCLK", + "AMP_DIN", + "AMP_LRCLK", + "UIM1_DATA_GPIO_109", + + "UIM1_CLK_GPIO_110", /* 110 */ + "UIM1_RESET_GPIO_111", + "PRB_SC_GPIO_112", + "UIM0_DATA", + "UIM0_CLK", + "UIM0_RST", + "UIM0_PRESENT_ODL", + "SDM_RFFE0_CLK", + "SDM_RFFE0_DATA", + "WF_CAM_EN", + + "FASTBOOT_SEL_0", /* 120 */ + "SC_GPIO_121", + "FASTBOOT_SEL_1", + "SC_GPIO_123", + "FASTBOOT_SEL_2", + "SM_RFFE4_CLK_GRFC_8", + "SM_RFFE4_DATA_GRFC_9", + "WLAN_COEX_UART1_RX", + "WLAN_COEX_UART1_TX", + "PRB_SC_GPIO_129", + + "LCM_ID0", /* 130 */ + "LCM_ID1", + "", + "SDR_QLINK_REQ", + "SDR_QLINK_EN", + "QLINK0_WMSS_RESET_N", + "SMR526_QLINK1_REQ", + "SMR526_QLINK1_EN", + "SMR526_QLINK1_WMSS_RESET_N", + "PRB_SC_GPIO_139", + + "SAR1_IRQ_ODL", /* 140 */ + "SAR0_IRQ_ODL", + "PRB_SC_GPIO_142", + "", + "WCD_SWR_TX_CLK", + "WCD_SWR_TX_DATA0", + "WCD_SWR_TX_DATA1", + "WCD_SWR_RX_CLK", + "WCD_SWR_RX_DATA0", + "WCD_SWR_RX_DATA1", + + "DMIC01_CLK", /* 150 */ + "DMIC01_DATA", + "DMIC23_CLK", + "DMIC23_DATA", + "", + "", + "EC_IN_RW_ODL", + "HUB_EN", + "WCD_SWR_TX_DATA2", + "", + + "", /* 160 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + + "", /* 170 */ + "MOS_BLE_UART_TX", + "MOS_BLE_UART_RX", + "", + "", + ""; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi new file mode 100644 index 000000000..c11e37160 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi @@ -0,0 +1,897 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Herobrine baseboard device tree source + * + * The set of things in this file is a bit loosely defined. It's roughly + * defined as the set of things that the child boards happen to have in + * common. Since all of the child boards started from the same original + * design this is hopefully a large set of things but as more derivatives + * appear things may "bubble down" out of this file. For things that are + * part of the reference design but might not exist on child nodes we will + * follow the lead of the SoC dtsi files and leave their status as "disabled". + * + * Copyright 2022 Google LLC. + */ + +#include +#include +#include + +#include "sc7280-qcard.dtsi" +#include "sc7280-chrome-common.dtsi" + +/ { + chosen { + stdout-path = "serial0:115200n8"; + }; + + /* + * FIXED REGULATORS + * + * Sort order: + * 1. parents above children. + * 2. higher voltage above lower voltage. + * 3. alphabetically by node name. + */ + + /* This is the top level supply and variable voltage */ + ppvar_sys: ppvar-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "ppvar_sys"; + regulator-always-on; + regulator-boot-on; + }; + + /* This divides ppvar_sys by 2, so voltage is variable */ + src_vph_pwr: src-vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "src_vph_pwr"; + + /* EC turns on with switchcap_on; always on for AP */ + regulator-always-on; + regulator-boot-on; + + vin-supply = <&ppvar_sys>; + }; + + pp5000_s5: pp5000-s5-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp5000_s5"; + + /* EC turns on with en_pp5000_s5; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + vin-supply = <&ppvar_sys>; + }; + + pp3300_z1: pp3300-z1-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp3300_z1"; + + /* EC turns on with en_pp3300_z1; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + vin-supply = <&ppvar_sys>; + }; + + pp3300_codec: pp3300-codec-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp3300_codec"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 105 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&en_pp3300_codec>; + + vin-supply = <&pp3300_z1>; + status = "disabled"; + }; + + pp3300_left_in_mlb: pp3300-left-in-mlb-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp3300_left_in_mlb"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 80 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&en_pp3300_dx_edp>; + + vin-supply = <&pp3300_z1>; + }; + + pp3300_mcu_fp: + pp3300_fp_ls: + pp3300_fp_mcu: pp3300-fp-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp3300_fp"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-boot-on; + regulator-always-on; + + /* + * WARNING: it is intentional that GPIO 77 isn't listed here. + * The userspace script for updating the fingerprint firmware + * needs to control the FP regulators during a FW update, + * hence the signal can't be owned by the kernel regulator. + */ + + pinctrl-names = "default"; + pinctrl-0 = <&en_fp_rails>; + + vin-supply = <&pp3300_z1>; + status = "disabled"; + }; + + pp3300_hub: pp3300-hub-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp3300_hub"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + /* The BIOS leaves this regulator on */ + regulator-boot-on; + + gpio = <&tlmm 157 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&hub_en>; + + vin-supply = <&pp3300_z1>; + }; + + pp3300_tp: pp3300-tp-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp3300_tp"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + /* AP turns on with PP1800_L18B_S0; always on for AP */ + regulator-always-on; + regulator-boot-on; + + vin-supply = <&pp3300_z1>; + }; + + pp3300_ssd: pp3300-ssd-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp3300_ssd"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 51 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&ssd_en>; + + /* + * The bootloaer may have left PCIe configured. Powering this + * off while the PCIe clocks are still running isn't great, + * so it's better to default to this regulator being on. + */ + regulator-boot-on; + + vin-supply = <&pp3300_z1>; + }; + + pp2850_vcm_wf_cam: pp2850-vcm-wf-cam-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp2850_vcm_wf_cam"; + + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + + gpio = <&tlmm 119 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&wf_cam_en>; + + vin-supply = <&pp3300_z1>; + status = "disabled"; + }; + + pp2850_wf_cam: pp2850-wf-cam-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp2850_wf_cam"; + + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + + gpio = <&tlmm 119 GPIO_ACTIVE_HIGH>; + enable-active-high; + /* + * The pinconf can only be referenced once so we put it on the + * first regulator and comment it out here. + * + * pinctrl-names = "default"; + * pinctrl-0 = <&wf_cam_en>; + */ + + vin-supply = <&pp3300_z1>; + status = "disabled"; + }; + + pp1800_fp: pp1800-fp-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp1800_fp"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-boot-on; + regulator-always-on; + + /* + * WARNING: it is intentional that GPIO 77 isn't listed here. + * The userspace script for updating the fingerprint firmware + * needs to control the FP regulators during a FW update, + * hence the signal can't be owned by the kernel regulator. + */ + + pinctrl-names = "default"; + pinctrl-0 = <&en_fp_rails>; + + vin-supply = <&pp1800_l18b_s0>; + status = "disabled"; + }; + + pp1800_wf_cam: pp1800-wf-cam-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp1800_wf_cam"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 119 GPIO_ACTIVE_HIGH>; + enable-active-high; + /* + * The pinconf can only be referenced once so we put it on the + * first regulator and comment it out here. + * + * pinctrl-names = "default"; + * pinctrl-0 = <&wf_cam_en>; + */ + + vin-supply = <&vreg_l19b_s0>; + status = "disabled"; + }; + + pp1200_wf_cam: pp1200-wf-cam-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp1200_wf_cam"; + + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + gpio = <&tlmm 119 GPIO_ACTIVE_HIGH>; + enable-active-high; + /* + * The pinconf can only be referenced once so we put it on the + * first regulator and comment it out here. + * + * pinctrl-names = "default"; + * pinctrl-0 = <&wf_cam_en>; + */ + + vin-supply = <&pp3300_z1>; + status = "disabled"; + }; + + /* BOARD-SPECIFIC TOP LEVEL NODES */ + + max98360a: audio-codec-0 { + compatible = "maxim,max98360a"; + pinctrl-names = "default"; + pinctrl-0 = <&_en>; + sdmode-gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>; + #sound-dai-cells = <0>; + }; + + pwmleds: pwmleds { + compatible = "pwm-leds"; + status = "disabled"; + keyboard_backlight: keyboard-backlight { + label = "cros_ec::kbd_backlight"; + function = LED_FUNCTION_KBD_BACKLIGHT; + pwms = <&cros_ec_pwm 0>; + max-brightness = <1023>; + }; + }; +}; + +/* + * ADJUSTMENTS TO QCARD REGULATORS + * + * Mostly this is just board-local names for regulators that come from + * Qcard, but this also has some minor regulator overrides. + * + * Names are only listed here if regulators go somewhere other than a + * testpoint. + */ + +/* From Qcard to our board; ordered by PMIC-ID / rail number */ + +pp1256_s8b: &vreg_s8b_1p256 {}; + +pp1800_l18b_s0: &vreg_l18b_1p8 {}; +pp1800_l18b: &vreg_l18b_1p8 {}; + +vreg_l19b_s0: &vreg_l19b_1p8 {}; + +pp1800_alc5682: &vreg_l2c_1p8 {}; +pp1800_l2c: &vreg_l2c_1p8 {}; + +vreg_l4c: &vreg_l4c_1p8_3p0 {}; + +ppvar_l6c: &vreg_l6c_2p96 {}; + +pp3000_l7c: &vreg_l7c_3p0 {}; + +pp1800_prox: &vreg_l8c_1p8 {}; +pp1800_l8c: &vreg_l8c_1p8 {}; + +pp2950_l9c: &vreg_l9c_2p96 {}; + +pp1800_lcm: &vreg_l12c_1p8 {}; +pp1800_mipi: &vreg_l12c_1p8 {}; +pp1800_l12c: &vreg_l12c_1p8 {}; + +pp3300_lcm: &vreg_l13c_3p0 {}; +pp3300_mipi: &vreg_l13c_3p0 {}; +pp3300_l13c: &vreg_l13c_3p0 {}; + +/* From our board to Qcard; ordered same as node definition above */ + +vreg_edp_bl: &ppvar_sys {}; + +ts_avdd: &pp3300_left_in_mlb {}; +vreg_edp_3p3: &pp3300_left_in_mlb {}; + +/* Regulator overrides from Qcard */ + +/* + * Herobrine boards only use l2c to power an external audio codec (like + * alc5682) and we want that to be at 1.8V, not at some slightly lower voltage. + */ +&vreg_l2c_1p8 { + regulator-min-microvolt = <1800000>; +}; + +/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ + +&edp_panel { + /* Our board provides power to the qcard for the eDP panel. */ + power-supply = <&vreg_edp_3p3>; +}; + +ap_sar_sensor_i2c: &i2c1 { + clock-frequency = <400000>; + status = "disabled"; + + ap_sar_sensor0: proximity@28 { + compatible = "semtech,sx9324"; + reg = <0x28>; + #io-channel-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sar0_irq_odl>; + + interrupt-parent = <&tlmm>; + interrupts = <141 IRQ_TYPE_LEVEL_LOW>; + + vdd-supply = <&pp1800_prox>; + + label = "proximity-wifi_cellular-0"; + status = "disabled"; + }; + + ap_sar_sensor1: proximity@2c { + compatible = "semtech,sx9324"; + reg = <0x2c>; + #io-channel-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sar1_irq_odl>; + + interrupt-parent = <&tlmm>; + interrupts = <140 IRQ_TYPE_LEVEL_LOW>; + + vdd-supply = <&pp1800_prox>; + + label = "proximity-wifi_cellular-1"; + status = "disabled"; + }; +}; + +ap_i2c_tpm: &i2c14 { + status = "okay"; + clock-frequency = <400000>; + + tpm@50 { + compatible = "google,cr50"; + reg = <0x50>; + + pinctrl-names = "default"; + pinctrl-0 = <&gsc_ap_int_odl>; + + interrupt-parent = <&tlmm>; + interrupts = <104 IRQ_TYPE_EDGE_RISING>; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dp { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dp_hot_plug_det>; + data-lanes = <0 1>; +}; + +&mdss_mdp { + status = "okay"; +}; + +/* NVMe drive, enabled on a per-board basis */ +&pcie1 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_clkreq_n>, <&ssd_rst_l>, <&pe_wake_odl>; + + perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; + vddpe-3v3-supply = <&pp3300_ssd>; +}; + +&pm8350c_pwm { + status = "okay"; +}; + +&pm8350c_pwm_backlight { + status = "okay"; + + /* Our board provides power to the qcard for the backlight */ + power-supply = <&vreg_edp_bl>; +}; + +&pmk8350_rtc { + status = "disabled"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +/* SD Card, enabled on a per-board basis */ +&sdhc_2 { + pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>, <&sd_cd_odl>; + pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>, <&sd_cd_odl>; + + vmmc-supply = <&pp2950_l9c>; + vqmmc-supply = <&ppvar_l6c>; + + cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>; +}; + +&spi_flash { + spi-max-frequency = <50000000>; +}; + +/* Fingerprint, enabled on a per-board basis */ +ap_spi_fp: &spi9 { + pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs_gpio_init_high>, <&qup_spi9_cs_gpio>; + + cs-gpios = <&tlmm 39 GPIO_ACTIVE_LOW>; + + cros_ec_fp: ec@0 { + compatible = "google,cros-ec-spi"; + reg = <0>; + interrupt-parent = <&tlmm>; + interrupts = <61 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&fp_to_ap_irq_l>, <&fp_rst_l>, <&fpmcu_boot0>; + spi-max-frequency = <3000000>; + }; +}; + +ap_ec_spi: &spi10 { + status = "okay"; + pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs_gpio_init_high>, <&qup_spi10_cs_gpio>; + + cs-gpios = <&tlmm 43 GPIO_ACTIVE_LOW>; + + cros_ec: ec@0 { + compatible = "google,cros-ec-spi"; + reg = <0>; + interrupt-parent = <&tlmm>; + interrupts = <18 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ap_ec_int_l>; + spi-max-frequency = <3000000>; + + cros_ec_pwm: pwm { + compatible = "google,cros-ec-pwm"; + #pwm-cells = <1>; + }; + + i2c_tunnel: i2c-tunnel { + compatible = "google,cros-ec-i2c-tunnel"; + google,remote-bus = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + typec { + compatible = "google,cros-ec-typec"; + #address-cells = <1>; + #size-cells = <0>; + + usb_c0: connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + label = "left"; + power-role = "dual"; + data-role = "host"; + try-power-role = "source"; + }; + + usb_c1: connector@1 { + compatible = "usb-c-connector"; + reg = <1>; + label = "right"; + power-role = "dual"; + data-role = "host"; + try-power-role = "source"; + }; + }; + }; +}; + +#include +#include + +&keyboard_controller { + function-row-physmap = < + MATRIX_KEY(0x00, 0x02, 0) /* T1 */ + MATRIX_KEY(0x03, 0x02, 0) /* T2 */ + MATRIX_KEY(0x02, 0x02, 0) /* T3 */ + MATRIX_KEY(0x01, 0x02, 0) /* T4 */ + MATRIX_KEY(0x03, 0x04, 0) /* T5 */ + MATRIX_KEY(0x02, 0x04, 0) /* T6 */ + MATRIX_KEY(0x01, 0x04, 0) /* T7 */ + MATRIX_KEY(0x02, 0x09, 0) /* T8 */ + MATRIX_KEY(0x01, 0x09, 0) /* T9 */ + MATRIX_KEY(0x00, 0x04, 0) /* T10 */ + >; + linux,keymap = < + MATRIX_KEY(0x00, 0x02, KEY_BACK) + MATRIX_KEY(0x03, 0x02, KEY_REFRESH) + MATRIX_KEY(0x02, 0x02, KEY_ZOOM) + MATRIX_KEY(0x01, 0x02, KEY_SCALE) + MATRIX_KEY(0x03, 0x04, KEY_SYSRQ) + MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN) + MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP) + MATRIX_KEY(0x02, 0x09, KEY_MUTE) + MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN) + MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP) + + CROS_STD_MAIN_KEYMAP + >; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "host"; + + #address-cells = <1>; + #size-cells = <0>; + + /* 2.x hub on port 1 */ + usb_hub_2_x: hub@1 { + compatible = "usbbda,5411"; + reg = <1>; + vdd-supply = <&pp3300_hub>; + peer-hub = <&usb_hub_3_x>; + }; + + /* 3.x hub on port 2 */ + usb_hub_3_x: hub@2 { + compatible = "usbbda,411"; + reg = <2>; + vdd-supply = <&pp3300_hub>; + peer-hub = <&usb_hub_2_x>; + }; +}; + +&usb_1_hsphy { + status = "okay"; +}; + +&usb_1_qmpphy { + status = "okay"; +}; + +/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */ + +&dp_hot_plug_det { + bias-disable; +}; + +&pcie1_clkreq_n { + bias-pull-up; + drive-strength = <2>; +}; + +&qspi_cs0 { + bias-disable; + drive-strength = <8>; +}; + +&qspi_clk { + bias-disable; + drive-strength = <8>; +}; + +&qspi_data01 { + /* High-Z when no transfers; nice to park the lines */ + bias-pull-up; + drive-strength = <8>; +}; + +/* For ap_tp_i2c */ +&qup_i2c0_data_clk { + /* Has external pull */ + bias-disable; + drive-strength = <2>; +}; + +/* For ap_i2c_tpm */ +&qup_i2c14_data_clk { + /* Has external pull */ + bias-disable; + drive-strength = <2>; +}; + +/* For ap_spi_fp */ +&qup_spi9_data_clk { + bias-disable; + drive-strength = <2>; +}; + +/* For ap_spi_fp */ +&qup_spi9_cs_gpio { + bias-disable; + drive-strength = <2>; +}; + +/* For ap_ec_spi */ +&qup_spi10_data_clk { + bias-disable; + drive-strength = <2>; +}; + +/* For ap_ec_spi */ +&qup_spi10_cs_gpio { + bias-disable; + drive-strength = <2>; +}; + +/* For uart_dbg */ +&qup_uart5_rx { + bias-pull-up; +}; + +/* For uart_dbg */ +&qup_uart5_tx { + bias-disable; + drive-strength = <2>; +}; + +&sdc2_clk { + bias-disable; + drive-strength = <16>; +}; + +&sdc2_cmd { + bias-pull-up; + drive-strength = <10>; +}; + +&sdc2_data { + bias-pull-up; + drive-strength = <10>; +}; + +/* PINCTRL - board-specific pinctrl */ + +&pm7325_gpios { + /* + * On a quick glance it might look like KYPD_VOL_UP_N is used, but + * that only passes through to a debug connector and not to the actual + * volume up key. + */ + status = "disabled"; /* No GPIOs are connected */ +}; + +&pmk8350_gpios { + status = "disabled"; /* No GPIOs are connected */ +}; + +&tlmm { + /* pinctrl settings for pins that have no real owners. */ + pinctrl-names = "default"; + pinctrl-0 = <&bios_flash_wp_od>; + + amp_en: amp-en-pins { + pins = "gpio63"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + + ap_ec_int_l: ap-ec-int-l-pins { + pins = "gpio18"; + function = "gpio"; + bias-pull-up; + }; + + bios_flash_wp_od: bios-flash-wp-od-pins { + pins = "gpio16"; + function = "gpio"; + /* Has external pull */ + bias-disable; + }; + + en_fp_rails: en-fp-rails-pins { + pins = "gpio77"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + output-high; + }; + + en_pp3300_codec: en-pp3300-codec-pins { + pins = "gpio105"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + + en_pp3300_dx_edp: en-pp3300-dx-edp-pins { + pins = "gpio80"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + + fp_rst_l: fp-rst-l-pins { + pins = "gpio78"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + + fp_to_ap_irq_l: fp-to-ap-irq-l-pins { + pins = "gpio61"; + function = "gpio"; + /* Has external pullup */ + bias-disable; + }; + + fpmcu_boot0: fpmcu-boot0-pins { + pins = "gpio68"; + function = "gpio"; + bias-disable; + }; + + gsc_ap_int_odl: gsc-ap-int-odl-pins { + pins = "gpio104"; + function = "gpio"; + bias-pull-up; + }; + + hp_irq: hp-irq-pins { + pins = "gpio101"; + function = "gpio"; + bias-pull-up; + }; + + hub_en: hub-en-pins { + pins = "gpio157"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + + pe_wake_odl: pe-wake-odl-pins { + pins = "gpio3"; + function = "gpio"; + /* Has external pull */ + bias-disable; + drive-strength = <2>; + }; + + /* For ap_spi_fp */ + qup_spi9_cs_gpio_init_high: qup-spi9-cs-gpio-init-high-pins { + pins = "gpio39"; + function = "gpio"; + output-high; + }; + + /* For ap_ec_spi */ + qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high-pins { + pins = "gpio43"; + function = "gpio"; + output-high; + }; + + sar0_irq_odl: sar0-irq-odl-pins { + pins = "gpio141"; + function = "gpio"; + bias-pull-up; + }; + + sar1_irq_odl: sar1-irq-odl-pins { + pins = "gpio140"; + function = "gpio"; + bias-pull-up; + }; + + sd_cd_odl: sd-cd-odl-pins { + pins = "gpio91"; + function = "gpio"; + bias-pull-up; + }; + + ssd_en: ssd-en-pins { + pins = "gpio51"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + + ssd_rst_l: ssd-rst-l-pins { + pins = "gpio2"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + output-low; + }; + + tp_int_odl: tp-int-odl-pins { + pins = "gpio7"; + function = "gpio"; + /* Has external pullup */ + bias-disable; + }; + + wf_cam_en: wf-cam-en-pins { + pins = "gpio119"; + function = "gpio"; + /* Has external pulldown */ + bias-disable; + drive-strength = <2>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi new file mode 100644 index 000000000..7f5143e9b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi @@ -0,0 +1,105 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * sc7280 EC/H1 over SPI (common between IDP2 and CRD) + * + * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +ap_ec_spi: &spi10 { + status = "okay"; + + pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs_gpio_init_high>, <&qup_spi10_cs_gpio>; + cs-gpios = <&tlmm 43 GPIO_ACTIVE_LOW>; + + cros_ec: ec@0 { + compatible = "google,cros-ec-spi"; + reg = <0>; + interrupt-parent = <&tlmm>; + interrupts = <18 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ap_ec_int_l>; + spi-max-frequency = <3000000>; + + cros_ec_pwm: pwm { + compatible = "google,cros-ec-pwm"; + #pwm-cells = <1>; + }; + + i2c_tunnel: i2c-tunnel { + compatible = "google,cros-ec-i2c-tunnel"; + google,remote-bus = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + typec { + compatible = "google,cros-ec-typec"; + #address-cells = <1>; + #size-cells = <0>; + + usb_c0: connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + label = "left"; + power-role = "dual"; + data-role = "host"; + try-power-role = "source"; + }; + + usb_c1: connector@1 { + compatible = "usb-c-connector"; + reg = <1>; + label = "right"; + power-role = "dual"; + data-role = "host"; + try-power-role = "source"; + }; + }; + }; +}; + +#include +#include + +ap_h1_spi: &spi14 { + status = "okay"; + + pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs_gpio_init_high>, <&qup_spi14_cs_gpio>; + cs-gpios = <&tlmm 59 GPIO_ACTIVE_LOW>; + + cr50: tpm@0 { + compatible = "google,cr50"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&h1_ap_int_odl>; + spi-max-frequency = <800000>; + interrupt-parent = <&tlmm>; + interrupts = <104 IRQ_TYPE_EDGE_RISING>; + }; +}; + +&tlmm { + ap_ec_int_l: ap-ec-int-l-pins { + pins = "gpio18"; + function = "gpio"; + input-enable; + bias-pull-up; + }; + + h1_ap_int_odl: h1-ap-int-odl-pins { + pins = "gpio104"; + function = "gpio"; + input-enable; + bias-pull-up; + }; + + qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high-pins { + pins = "gpio43"; + output-high; + }; + + qup_spi14_cs_gpio_init_high: qup-spi14-cs-gpio-init-high-pins { + pins = "gpio59"; + output-high; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts new file mode 100644 index 000000000..e2e37a029 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts @@ -0,0 +1,102 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * sc7280 IDP board device tree source + * + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include +#include "sc7280-idp.dtsi" +#include "pmr735a.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. sc7280 IDP SKU1 platform"; + compatible = "qcom,sc7280-idp", "google,senor", "qcom,sc7280"; + + aliases { + serial0 = &uart5; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&apps_rsc { + pmr735a-regulators { + compatible = "qcom,pmr735a-rpmh-regulators"; + qcom,pmic-id = "e"; + + vreg_l2e_1p2: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l3e_0p9: ldo3 { + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <1020000>; + }; + + vreg_l4e_1p7: ldo4 { + regulator-min-microvolt = <1776000>; + regulator-max-microvolt = <1890000>; + }; + + vreg_l5e_0p8: ldo5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + vreg_l6e_0p8: ldo6 { + regulator-min-microvolt = <480000>; + regulator-max-microvolt = <904000>; + }; + }; +}; + +&bluetooth { + vddio-supply = <&vreg_l19b_1p8>; +}; + +&ipa { + status = "okay"; + modem-init; +}; + +&pmk8350_rtc { + status = "okay"; +}; + +&nvme_pwren { + pins = "gpio19"; +}; + +&nvme_3v3_regulator { + gpio = <&tlmm 19 GPIO_ACTIVE_HIGH>; +}; + +&pmk8350_vadc { + pmr735a-die-temp@403 { + reg = ; + label = "pmr735a_die_temp"; + qcom,pre-scaling = <1 1>; + }; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "otg"; +}; + +&usb_2_hsphy { + status = "okay"; + + vdda-pll-supply = <&vreg_l10c_0p8>; + vdda33-supply = <&vreg_l2b_3p0>; + vdda18-supply = <&vreg_l1c_1p8>; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi new file mode 100644 index 000000000..1c370dcfe --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi @@ -0,0 +1,853 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * sc7280 IDP board device tree source (common between SKU1 and SKU2) + * + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + */ + +#include +#include +#include "sc7280.dtsi" +#include "pm7325.dtsi" +#include "pm8350c.dtsi" +#include "pmk8350.dtsi" + +#include "sc7280-chrome-common.dtsi" +#include "sc7280-herobrine-lte-sku.dtsi" + +/ { + aliases { + bluetooth0 = &bluetooth; + serial1 = &uart7; + }; + + max98360a: audio-codec-0 { + compatible = "maxim,max98360a"; + pinctrl-names = "default"; + pinctrl-0 = <&_en>; + sdmode-gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>; + #sound-dai-cells = <0>; + }; + + wcd9385: audio-codec-1 { + compatible = "qcom,wcd9385-codec"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&wcd_reset_n>; + pinctrl-1 = <&wcd_reset_n_sleep>; + + reset-gpios = <&tlmm 83 GPIO_ACTIVE_LOW>; + + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + + vdd-rxtx-supply = <&vreg_l18b_1p8>; + vdd-io-supply = <&vreg_l18b_1p8>; + vdd-buck-supply = <&vreg_l17b_1p8>; + vdd-mic-bias-supply = <&vreg_bob>; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 + 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + #sound-dai-cells = <1>; + }; + + gpio-keys { + compatible = "gpio-keys"; + label = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&key_vol_up_default>; + + key-volume-up { + label = "volume_up"; + gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + gpio-key,wakeup; + debounce-interval = <15>; + linux,can-disable; + }; + }; + + nvme_3v3_regulator: nvme-3v3-regulator { + compatible = "regulator-fixed"; + regulator-name = "VLDO_3V3"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&nvme_pwren>; + }; + + sound: sound { + compatible = "google,sc7280-herobrine"; + model = "sc7280-wcd938x-max98360a-1mic"; + + audio-routing = + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC1", "MIC BIAS1", + "AMIC2", "MIC BIAS2", + "VA DMIC0", "MIC BIAS3", + "VA DMIC1", "MIC BIAS3", + "VA DMIC2", "MIC BIAS1", + "VA DMIC3", "MIC BIAS1", + "TX SWR_ADC0", "ADC1_OUTPUT", + "TX SWR_ADC1", "ADC2_OUTPUT", + "TX SWR_ADC2", "ADC3_OUTPUT", + "TX SWR_DMIC0", "DMIC1_OUTPUT", + "TX SWR_DMIC1", "DMIC2_OUTPUT", + "TX SWR_DMIC2", "DMIC3_OUTPUT", + "TX SWR_DMIC3", "DMIC4_OUTPUT", + "TX SWR_DMIC4", "DMIC5_OUTPUT", + "TX SWR_DMIC5", "DMIC6_OUTPUT", + "TX SWR_DMIC6", "DMIC7_OUTPUT", + "TX SWR_DMIC7", "DMIC8_OUTPUT"; + + qcom,msm-mbhc-hphl-swh = <1>; + qcom,msm-mbhc-gnd-swh = <1>; + + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <0>; + + dai-link@0 { + link-name = "MAX98360A"; + reg = <0>; + + cpu { + sound-dai = <&lpass_cpu MI2S_SECONDARY>; + }; + + codec { + sound-dai = <&max98360a>; + }; + }; + + dai-link@1 { + link-name = "DisplayPort"; + reg = <1>; + + cpu { + sound-dai = <&lpass_cpu LPASS_DP_RX>; + }; + + codec { + sound-dai = <&mdss_dp>; + }; + }; + + dai-link@2 { + link-name = "WCD9385 Playback"; + reg = <2>; + + cpu { + sound-dai = <&lpass_cpu LPASS_CDC_DMA_RX0>; + }; + + codec { + sound-dai = <&wcd9385 0>, <&swr0 0>, <&lpass_rx_macro 0>; + }; + }; + + dai-link@3 { + link-name = "WCD9385 Capture"; + reg = <3>; + + cpu { + sound-dai = <&lpass_cpu LPASS_CDC_DMA_TX3>; + }; + + codec { + sound-dai = <&wcd9385 1>, <&swr1 0>, <&lpass_tx_macro 0>; + }; + }; + + dai-link@4 { + link-name = "DMIC"; + reg = <4>; + + cpu { + sound-dai = <&lpass_cpu LPASS_CDC_DMA_VA_TX0>; + }; + + codec { + sound-dai = <&lpass_va_macro 0>; + }; + }; + }; +}; + +&apps_rsc { + pm7325-regulators { + compatible = "qcom,pm7325-rpmh-regulators"; + qcom,pmic-id = "b"; + + vreg_s1b_1p8: smps1 { + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7b_0p9: smps7 { + regulator-min-microvolt = <535000>; + regulator-max-microvolt = <1120000>; + }; + + vreg_s8b_1p2: smps8 { + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1500000>; + }; + + vreg_l1b_0p8: ldo1 { + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <925000>; + }; + + vreg_l2b_3p0: ldo2 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + }; + + vreg_l6b_1p2: ldo6 { + regulator-min-microvolt = <1140000>; + regulator-max-microvolt = <1260000>; + }; + + vreg_l7b_2p9: ldo7 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + }; + + vreg_l8b_0p9: ldo8 { + regulator-min-microvolt = <870000>; + regulator-max-microvolt = <970000>; + }; + + vreg_l9b_1p2: ldo9 { + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1304000>; + }; + + vreg_l11b_1p7: ldo11 { + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <2000000>; + }; + + vreg_l12b_0p8: ldo12 { + regulator-min-microvolt = <751000>; + regulator-max-microvolt = <824000>; + }; + + vreg_l13b_0p8: ldo13 { + regulator-min-microvolt = <530000>; + regulator-max-microvolt = <824000>; + }; + + vreg_l14b_1p2: ldo14 { + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1304000>; + }; + + vreg_l15b_0p8: ldo15 { + regulator-min-microvolt = <765000>; + regulator-max-microvolt = <1020000>; + }; + + vreg_l16b_1p2: ldo16 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + }; + + vreg_l17b_1p8: ldo17 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + }; + + vreg_l18b_1p8: ldo18 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + }; + + vreg_l19b_1p8: ldo19 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + + pm8350c-regulators { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_s1c_2p2: smps1 { + regulator-min-microvolt = <2190000>; + regulator-max-microvolt = <2210000>; + }; + + vreg_s9c_1p0: smps9 { + regulator-min-microvolt = <1010000>; + regulator-max-microvolt = <1170000>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1980000>; + }; + + vreg_l2c_1p8: ldo2 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + }; + + vreg_l3c_3p0: ldo3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3540000>; + }; + + vreg_l4c_1p8: ldo4 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + }; + + vreg_l5c_1p8: ldo5 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + }; + + vreg_l6c_2p9: ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + vreg_l7c_3p0: ldo7 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3544000>; + }; + + vreg_l8c_1p8: ldo8 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <2000000>; + }; + + vreg_l9c_2p9: ldo9 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + }; + + vreg_l10c_0p8: ldo10 { + regulator-min-microvolt = <720000>; + regulator-max-microvolt = <1050000>; + }; + + vreg_l11c_2p8: ldo11 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3544000>; + }; + + vreg_l12c_1p8: ldo12 { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <2000000>; + }; + + vreg_l13c_3p0: ldo13 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + }; + + vreg_bob: bob { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + }; + }; +}; + +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&ipa { + status = "okay"; + modem-init; +}; + +&lpass_cpu { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&mi2s1_data0>, <&mi2s1_sclk>, <&mi2s1_ws>; + + dai-link@1 { + reg = ; + qcom,playback-sd-lines = <0>; + }; + + dai-link@5 { + reg = ; + }; + + dai-link@6 { + reg = ; + }; + + dai-link@19 { + reg = ; + }; + + dai-link@25 { + reg = ; + }; +}; + +&lpass_rx_macro { + status = "okay"; +}; + +&lpass_tx_macro { + status = "okay"; +}; + +&lpass_va_macro { + status = "okay"; + vdd-micb-supply = <&vreg_bob>; +}; + +&pcie1 { + status = "okay"; + perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; + + vddpe-3v3-supply = <&nvme_3v3_regulator>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_reset_n>, <&pcie1_wake_n>; +}; + +&pcie1_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l10c_0p8>; + vdda-pll-supply = <&vreg_l6b_1p2>; +}; + +&pmk8350_vadc { + pmk8350-die-temp@3 { + reg = ; + label = "pmk8350_die_temp"; + qcom,pre-scaling = <1 1>; + }; +}; + +&qfprom { + vcc-supply = <&vreg_l1c_1p8>; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; + + non-removable; + no-sd; + no-sdio; + + vmmc-supply = <&vreg_l7b_2p9>; + vqmmc-supply = <&vreg_l19b_1p8>; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>, <&sd_cd>; + pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>, <&sd_cd>; + + vmmc-supply = <&vreg_l9c_2p9>; + vqmmc-supply = <&vreg_l6c_2p9>; + + cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>; +}; + +&swr0 { + status = "okay"; + + wcd_rx: codec@0,4 { + compatible = "sdw20217010d00"; + reg = <0 4>; + qcom,rx-port-mapping = <1 2 3 4 5>; + }; +}; + +&swr1 { + status = "okay"; + + wcd_tx: codec@0,3 { + compatible = "sdw20217010d00"; + reg = <0 3>; + qcom,tx-port-mapping = <1 2 3 4>; + }; +}; + +&uart5 { + compatible = "qcom,geni-debug-uart"; + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdda-pll-supply = <&vreg_l10c_0p8>; + vdda33-supply = <&vreg_l2b_3p0>; + vdda18-supply = <&vreg_l1c_1p8>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l6b_1p2>; + vdda-pll-supply = <&vreg_l1b_0p8>; +}; + +&uart7 { + status = "okay"; + + /delete-property/interrupts; + interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>, + <&tlmm 31 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default", "sleep"; + pinctrl-1 = <&qup_uart7_sleep_cts>, <&qup_uart7_sleep_rts>, <&qup_uart7_sleep_tx>, <&qup_uart7_sleep_rx>; + + bluetooth: bluetooth { + compatible = "qcom,wcn6750-bt"; + pinctrl-names = "default"; + pinctrl-0 = <&bt_en>, <&sw_ctrl>; + enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>; + swctrl-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>; + vddaon-supply = <&vreg_s7b_0p9>; + vddbtcxmx-supply = <&vreg_s7b_0p9>; + vddrfacmn-supply = <&vreg_s7b_0p9>; + vddrfa0p8-supply = <&vreg_s7b_0p9>; + vddrfa1p7-supply = <&vreg_s1b_1p8>; + vddrfa1p2-supply = <&vreg_s8b_1p2>; + vddrfa2p2-supply = <&vreg_s1c_2p2>; + vddasd-supply = <&vreg_l11c_2p8>; + max-speed = <3200000>; + }; +}; + +/* PINCTRL - additions to nodes defined in sc7280.dtsi */ + +&dp_hot_plug_det { + bias-disable; +}; + +&lpass_dmic01_clk { + drive-strength = <8>; + bias-disable; +}; + +&lpass_dmic01_clk_sleep { + drive-strength = <2>; +}; + +&lpass_dmic01_data { + bias-pull-down; +}; + +&lpass_dmic23_clk { + drive-strength = <8>; + bias-disable; +}; + +&lpass_dmic23_clk_sleep { + drive-strength = <2>; +}; + +&lpass_dmic23_data { + bias-pull-down; +}; + +&lpass_rx_swr_clk { + drive-strength = <2>; + slew-rate = <1>; + bias-disable; +}; + +&lpass_rx_swr_clk_sleep { + bias-pull-down; +}; + +&lpass_rx_swr_data { + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; +}; + +&lpass_rx_swr_data_sleep { + bias-pull-down; +}; + +&lpass_tx_swr_clk { + drive-strength = <2>; + slew-rate = <1>; + bias-disable; +}; + +&lpass_tx_swr_clk_sleep { + bias-pull-down; +}; + +&lpass_tx_swr_data { + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; +}; + +&mi2s1_data0 { + drive-strength = <6>; + bias-disable; +}; + +&mi2s1_sclk { + drive-strength = <6>; + bias-disable; +}; + +&mi2s1_ws { + drive-strength = <6>; +}; + +&pm7325_gpios { + key_vol_up_default: key-vol-up-state { + pins = "gpio6"; + function = "normal"; + input-enable; + bias-pull-up; + power-source = <0>; + qcom,drive-strength = <3>; + }; +}; + +&pcie1_clkreq_n { + bias-pull-up; + drive-strength = <2>; +}; + +&qspi_cs0 { + bias-disable; +}; + +&qspi_clk { + bias-disable; +}; + +&qspi_data01 { + /* High-Z when no transfers; nice to park the lines */ + bias-pull-up; +}; + +&qup_uart5_tx { + drive-strength = <2>; + bias-disable; +}; + +&qup_uart5_rx { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_uart7_cts { + /* + * Configure a bias-bus-hold on CTS to lower power + * usage when Bluetooth is turned off. Bus hold will + * maintain a low power state regardless of whether + * the Bluetooth module drives the pin in either + * direction or leaves the pin fully unpowered. + */ + bias-bus-hold; +}; + +&qup_uart7_rts { + /* We'll drive RTS, so no pull */ + drive-strength = <2>; + bias-disable; +}; + +&qup_uart7_tx { + /* We'll drive TX, so no pull */ + drive-strength = <2>; + bias-disable; +}; + +&qup_uart7_rx { + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module is + * in tri-state (module powered off or not driving the + * signal yet). + */ + bias-pull-up; +}; + +&sdc1_clk { + bias-disable; + drive-strength = <16>; +}; + +&sdc1_cmd { + bias-pull-up; + drive-strength = <10>; +}; + +&sdc1_data { + bias-pull-up; + drive-strength = <10>; +}; + +&sdc1_rclk { + bias-pull-down; +}; + +&sdc2_clk { + bias-disable; + drive-strength = <16>; +}; + +&sdc2_cmd { + bias-pull-up; + drive-strength = <10>; +}; + +&sdc2_data { + bias-pull-up; + drive-strength = <10>; +}; + +&tlmm { + amp_en: amp-en { + pins = "gpio63"; + bias-pull-down; + drive-strength = <2>; + }; + + bt_en: bt-en-pins { + pins = "gpio85"; + function = "gpio"; + output-low; + bias-disable; + }; + + nvme_pwren: nvme-pwren-pins { + function = "gpio"; + }; + + pcie1_reset_n: pcie1-reset-n-pins { + pins = "gpio2"; + function = "gpio"; + + drive-strength = <16>; + output-low; + bias-disable; + }; + + pcie1_wake_n: pcie1-wake-n-pins { + pins = "gpio3"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + + qup_uart7_sleep_cts: qup-uart7-sleep-cts-pins { + pins = "gpio28"; + function = "gpio"; + /* + * Configure a bias-bus-hold on CTS to lower power + * usage when Bluetooth is turned off. Bus hold will + * maintain a low power state regardless of whether + * the Bluetooth module drives the pin in either + * direction or leaves the pin fully unpowered. + */ + bias-bus-hold; + }; + + qup_uart7_sleep_rts: qup-uart7-sleep-rts-pins { + pins = "gpio29"; + function = "gpio"; + /* + * Configure pull-down on RTS. As RTS is active low + * signal, pull it low to indicate the BT SoC that it + * can wakeup the system anytime from suspend state by + * pulling RX low (by sending wakeup bytes). + */ + bias-pull-down; + }; + + qup_uart7_sleep_tx: qup-uart7-sleep-tx-pins { + pins = "gpio30"; + function = "gpio"; + /* + * Configure pull-up on TX when it isn't actively driven + * to prevent BT SoC from receiving garbage during sleep. + */ + bias-pull-up; + }; + + qup_uart7_sleep_rx: qup-uart7-sleep-rx-pins { + pins = "gpio31"; + function = "gpio"; + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module + * is floating which may cause spurious wakeups. + */ + bias-pull-up; + }; + + sd_cd: sd-cd-pins { + pins = "gpio91"; + function = "gpio"; + bias-pull-up; + }; + + sw_ctrl: sw-ctrl-pins { + pins = "gpio86"; + function = "gpio"; + bias-pull-down; + }; + + wcd_reset_n: wcd-reset-n { + pins = "gpio83"; + function = "gpio"; + drive-strength = <8>; + }; + + wcd_reset_n_sleep: wcd-reset-n-sleep { + pins = "gpio83"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp2.dts b/arch/arm64/boot/dts/qcom/sc7280-idp2.dts new file mode 100644 index 000000000..d4f7cab17 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-idp2.dts @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * sc7280 IDP2 board device tree source + * + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include "sc7280-idp.dtsi" +#include "sc7280-idp-ec-h1.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. sc7280 IDP SKU2 platform"; + compatible = "qcom,sc7280-idp2", "google,piglin", "qcom,sc7280"; + + aliases { + serial0 = &uart5; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&bluetooth { + vddio-supply = <&vreg_l18b_1p8>; +}; + +&nvme_pwren { + pins = "gpio51"; +}; + +&nvme_3v3_regulator { + gpio = <&tlmm 51 GPIO_ACTIVE_HIGH>; +}; + +&pm8350c_pwm { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi new file mode 100644 index 000000000..c358abc05 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi @@ -0,0 +1,684 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * sc7280 Qcard device tree source + * + * Qcard PCB has the processor, RAM, eMMC (if stuffed), and eDP connector (if + * stuffed) on it. This device tree tries to encapsulate all the things that + * all boards using Qcard will have in common. Given that there are stuffing + * options, some things may be left with status "disabled" and enabled in + * the actual board device tree files. + * + * Copyright 2022 Google LLC. + */ + +#include +#include +#include +#include + +#include "sc7280.dtsi" + +/* PMICs depend on spmi_bus label and so must come after SoC */ +#include "pm7325.dtsi" +#include "pm8350c.dtsi" +#include "pmk8350.dtsi" + +/ { + aliases { + bluetooth0 = &bluetooth; + serial0 = &uart5; + serial1 = &uart7; + wifi0 = &wifi; + }; + + wcd9385: audio-codec-1 { + compatible = "qcom,wcd9385-codec"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&wcd_reset_n>, <&us_euro_hs_sel>; + pinctrl-1 = <&wcd_reset_n_sleep>, <&us_euro_hs_sel>; + + reset-gpios = <&tlmm 83 GPIO_ACTIVE_LOW>; + us-euro-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>; + + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + + vdd-rxtx-supply = <&vreg_l18b_1p8>; + vdd-io-supply = <&vreg_l18b_1p8>; + vdd-buck-supply = <&vreg_l17b_1p8>; + vdd-mic-bias-supply = <&vreg_bob>; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 + 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + #sound-dai-cells = <1>; + + status = "disabled"; + }; + + pm8350c_pwm_backlight: backlight { + compatible = "pwm-backlight"; + status = "disabled"; + + enable-gpios = <&pm8350c_gpios 7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_edp_bl_en>; + pwms = <&pm8350c_pwm 3 65535>; + }; +}; + +&apps_rsc { + /* + * Regulators are given labels corresponding to the various names + * they are referred to on schematics. They are also given labels + * corresponding to named voltage inputs on the SoC or components + * bundled with the SoC (like radio companion chips). We totally + * ignore it when one regulator is the input to another regulator. + * That's handled automatically by the initial config given to + * RPMH by the firmware. + * + * Regulators that the HLOS (High Level OS) doesn't touch at all + * are left out of here since they are managed elsewhere. + */ + + pm7325-regulators { + compatible = "qcom,pm7325-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd19_pmu_pcie_i: + vdd19_pmu_rfa_i: + vreg_s1b_1p856: smps1 { + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <2040000>; + }; + + vdd_pmu_aon_i: + vdd09_pmu_rfa_i: + vdd095_mx_pmu: + vdd095_pmu: + vreg_s7b_0p952: smps7 { + regulator-min-microvolt = <535000>; + regulator-max-microvolt = <1120000>; + }; + + vdd13_pmu_rfa_i: + vdd13_pmu_pcie_i: + vreg_s8b_1p256: smps8 { + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1500000>; + }; + + vdd_a_usbssdp_0_core: + vreg_l1b_0p912: ldo1 { + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <925000>; + regulator-initial-mode = ; + }; + + vdd_a_usbhs_3p1: + vreg_l2b_3p072: ldo2 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = ; + }; + + vdd_a_csi_0_1_1p2: + vdd_a_csi_2_3_1p2: + vdd_a_csi_4_1p2: + vdd_a_dsi_0_1p2: + vdd_a_edp_0_1p2: + vdd_a_qlink_0_1p2: + vdd_a_qlink_1_1p2: + vdd_a_pcie_0_1p2: + vdd_a_pcie_1_1p2: + vdd_a_ufs_0_1p2: + vdd_a_usbssdp_0_1p2: + vreg_l6b_1p2: ldo6 { + regulator-min-microvolt = <1140000>; + regulator-max-microvolt = <1260000>; + regulator-initial-mode = ; + }; + + /* + * Despite the fact that this is named to be 2.5V on the + * schematic, it powers eMMC which doesn't accept 2.5V + */ + vreg_l7b_2p5: ldo7 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l17b_1p8: ldo17 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + regulator-initial-mode = ; + }; + + vdd_px_wcd9385: + vdd_txrx: + vddpx_0: + vddpx_3: + vddpx_7: + vreg_l18b_1p8: ldo18 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = ; + }; + + vdd_1p8: + vdd_px_sdr735: + vdd_pxm: + vdd18_io: + vddio_px_1: + vddio_px_2: + vddio_px_3: + vddpx_ts: + vddpx_wl4otp: + vreg_l19b_1p8: ldo19 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + }; + + pm8350c-regulators { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd22_wlbtpa_ch0: + vdd22_wlbtpa_ch1: + vdd22_wlbtppa_ch0: + vdd22_wlbtppa_ch1: + vdd22_wlpa5g_ch0: + vdd22_wlpa5g_ch1: + vdd22_wlppa5g_ch0: + vdd22_wlppa5g_ch1: + vreg_s1c_2p2: smps1 { + regulator-min-microvolt = <2190000>; + regulator-max-microvolt = <2210000>; + }; + + lp4_vdd2_1p052: + vreg_s9c_0p676: smps9 { + regulator-min-microvolt = <1010000>; + regulator-max-microvolt = <1170000>; + }; + + vdda_apc_cs_1p8: + vdda_gfx_cs_1p8: + vdda_turing_q6_cs_1p8: + vdd_a_cxo_1p8: + vdd_a_qrefs_1p8: + vdd_a_usbhs_1p8: + vdd_qfprom: + vreg_l1c_1p8: ldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = ; + }; + + vreg_l2c_1p8: ldo2 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = ; + }; + + vreg_l3c_3p0: ldo3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3540000>; + regulator-initial-mode = ; + }; + + vddpx_5: + vreg_l4c_1p8_3p0: ldo4 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = ; + }; + + vddpx_6: + vreg_l5c_1p8_3p0: ldo5 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = ; + }; + + vddpx_2: + vreg_l6c_2p96: ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-initial-mode = ; + }; + + vreg_l7c_3p0: ldo7 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = ; + }; + + vreg_l8c_1p8: ldo8 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = ; + }; + + vreg_l9c_2p96: ldo9 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vdd_a_csi_0_1_0p9: + vdd_a_csi_2_3_0p9: + vdd_a_csi_4_0p9: + vdd_a_dsi_0_0p9: + vdd_a_dsi_0_pll_0p9: + vdd_a_edp_0_0p9: + vdd_a_gnss_0p9: + vdd_a_pcie_0_core: + vdd_a_pcie_1_core: + vdd_a_qlink_0_0p9: + vdd_a_qlink_0_0p9_ck: + vdd_a_qlink_1_0p9: + vdd_a_qlink_1_0p9_ck: + vdd_a_qrefs_0p875_0: + vdd_a_qrefs_0p875_1: + vdd_a_qrefs_0p875_2: + vdd_a_qrefs_0p875_3: + vdd_a_qrefs_0p875_4_5: + vdd_a_qrefs_0p875_6: + vdd_a_qrefs_0p875_7: + vdd_a_qrefs_0p875_8: + vdd_a_qrefs_0p875_9: + vdd_a_ufs_0_core: + vdd_a_usbhs_core: + vreg_l10c_0p88: ldo10 { + regulator-min-microvolt = <720000>; + regulator-max-microvolt = <1050000>; + regulator-initial-mode = ; + }; + + vreg_l11c_2p8: ldo11 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = ; + }; + + vreg_l12c_1p8: ldo12 { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = ; + }; + + vreg_l13c_3p0: ldo13 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = ; + }; + + vdd_flash: + vdd_iris_rgb: + vdd_mic_bias: + vreg_bob: bob { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = ; + }; + }; +}; + +/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ + +&ipa { + status = "okay"; + modem-init; +}; + +&lpass_va_macro { + vdd-micb-supply = <&vreg_bob>; +}; + +/* NOTE: Not all Qcards have eDP connector stuffed */ +&mdss_edp { + aux-bus { + edp_panel: panel { + compatible = "edp-panel"; + + backlight = <&pm8350c_pwm_backlight>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + edp_panel_in: endpoint { + remote-endpoint = <&mdss_edp_out>; + }; + }; + }; + }; + }; +}; + +&mdss_edp_out { + remote-endpoint = <&edp_panel_in>; +}; + +&mdss_edp_phy { + vdda-pll-supply = <&vdd_a_edp_0_0p9>; + vdda-phy-supply = <&vdd_a_edp_0_1p2>; +}; + +&pcie1_phy { + vdda-phy-supply = <&vreg_l10c_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; +}; + +&pm8350c_pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pmic_edp_bl_pwm>; +}; + +&pmk8350_vadc { + pmk8350-die-temp@3 { + reg = ; + label = "pmk8350_die_temp"; + qcom,pre-scaling = <1 1>; + }; + + pmr735a-die-temp@403 { + reg = ; + label = "pmr735a_die_temp"; + qcom,pre-scaling = <1 1>; + }; +}; + +&qfprom { + vcc-supply = <&vdd_qfprom>; +}; + +/* For eMMC. NOTE: not all Qcards have eMMC stuffed */ +&sdhc_1 { + vmmc-supply = <&vreg_l7b_2p5>; + vqmmc-supply = <&vreg_l19b_1p8>; + + non-removable; + no-sd; + no-sdio; +}; + +&swr0 { + wcd_rx: codec@0,4 { + compatible = "sdw20217010d00"; + reg = <0 4>; + qcom,rx-port-mapping = <1 2 3 4 5>; + }; +}; + +&swr1 { + wcd_tx: codec@0,3 { + compatible = "sdw20217010d00"; + reg = <0 3>; + qcom,tx-port-mapping = <1 2 3 4>; + }; +}; + +uart_dbg: &uart5 { + compatible = "qcom,geni-debug-uart"; + status = "okay"; +}; + +mos_bt_uart: &uart7 { + status = "okay"; + + /delete-property/ interrupts; + interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>, + <&tlmm 31 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default", "sleep"; + pinctrl-1 = <&qup_uart7_sleep_cts>, <&qup_uart7_sleep_rts>, <&qup_uart7_sleep_tx>, <&qup_uart7_sleep_rx>; + + bluetooth: bluetooth { + compatible = "qcom,wcn6750-bt"; + pinctrl-names = "default"; + pinctrl-0 = <&mos_bt_en>; + enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>; + swctrl-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>; + vddaon-supply = <&vreg_s7b_0p952>; + vddbtcxmx-supply = <&vreg_s7b_0p952>; + vddrfacmn-supply = <&vreg_s7b_0p952>; + vddrfa0p8-supply = <&vreg_s7b_0p952>; + vddrfa1p7-supply = <&vdd19_pmu_rfa_i>; + vddrfa1p2-supply = <&vdd13_pmu_rfa_i>; + vddrfa2p2-supply = <&vreg_s1c_2p2>; + vddasd-supply = <&vreg_l11c_2p8>; + vddio-supply = <&vreg_l18b_1p8>; + max-speed = <3200000>; + }; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&vdd_a_usbhs_core>; + vdda33-supply = <&vdd_a_usbhs_3p1>; + vdda18-supply = <&vdd_a_usbhs_1p8>; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vdd_a_usbssdp_0_1p2>; + vdda-pll-supply = <&vdd_a_usbssdp_0_core>; +}; + +&usb_2_hsphy { + vdda-pll-supply = <&vdd_a_usbhs_core>; + vdda33-supply = <&vdd_a_usbhs_3p1>; + vdda18-supply = <&vdd_a_usbhs_1p8>; +}; + +/* + * PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES + * + * NOTE: In general if pins leave the Qcard then the pinctrl goes in the + * baseboard or board device tree, not here. + */ + +/* No external pull for eDP HPD, so set the internal one. */ +&edp_hot_plug_det { + bias-pull-down; +}; + +/* + * For ts_i2c + * + * Technically this i2c bus actually leaves the Qcard, but it leaves directly + * via the eDP connector (it doesn't hit the baseboard). The external pulls + * are on Qcard. + */ +&qup_i2c13_data_clk { + /* Has external pull */ + bias-disable; + drive-strength = <2>; +}; + +/* For mos_bt_uart */ +&qup_uart7_cts { + /* + * Configure a bias-bus-hold on CTS to lower power + * usage when Bluetooth is turned off. Bus hold will + * maintain a low power state regardless of whether + * the Bluetooth module drives the pin in either + * direction or leaves the pin fully unpowered. + */ + bias-bus-hold; +}; + +/* For mos_bt_uart */ +&qup_uart7_rts { + /* We'll drive RTS, so no pull */ + bias-disable; + drive-strength = <2>; +}; + +/* For mos_bt_uart */ +&qup_uart7_tx { + /* We'll drive TX, so no pull */ + bias-disable; + drive-strength = <2>; +}; + +/* For mos_bt_uart */ +&qup_uart7_rx { + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module is + * in tri-state (module powered off or not driving the + * signal yet). + */ + bias-pull-up; +}; + +/* eMMC, if stuffed, is straight on the Qcard */ +&sdc1_clk { + bias-disable; + drive-strength = <16>; +}; + +&sdc1_cmd { + bias-pull-up; + drive-strength = <10>; +}; + +&sdc1_data { + bias-pull-up; + drive-strength = <10>; +}; + +&sdc1_rclk { + bias-pull-down; +}; + +/* + * PINCTRL - QCARD + * + * This has entries that are defined by Qcard even if they go to the main + * board. In cases where the pulls may be board dependent we defer those + * settings to the board device tree. Drive strengths tend to be assinged here + * but could conceivably be overwridden by board device trees. + */ + +&pm8350c_gpios { + pmic_edp_bl_en: pmic-edp-bl-en-state { + pins = "gpio7"; + function = "normal"; + bias-disable; + qcom,drive-strength = ; + + /* Force backlight to be disabled to match state at boot. */ + output-low; + }; + + pmic_edp_bl_pwm: pmic-edp-bl-pwm-state { + pins = "gpio8"; + function = "func1"; + bias-disable; + qcom,drive-strength = ; + output-low; + power-source = <0>; + }; +}; + +&tlmm { + mos_bt_en: mos-bt-en-pins { + pins = "gpio85"; + function = "gpio"; + drive-strength = <2>; + output-low; + }; + + /* For mos_bt_uart */ + qup_uart7_sleep_cts: qup-uart7-sleep-cts-pins { + pins = "gpio28"; + function = "gpio"; + /* + * Configure a bias-bus-hold on CTS to lower power + * usage when Bluetooth is turned off. Bus hold will + * maintain a low power state regardless of whether + * the Bluetooth module drives the pin in either + * direction or leaves the pin fully unpowered. + */ + bias-bus-hold; + }; + + /* For mos_bt_uart */ + qup_uart7_sleep_rts: qup-uart7-sleep-rts-pins { + pins = "gpio29"; + function = "gpio"; + /* + * Configure pull-down on RTS. As RTS is active low + * signal, pull it low to indicate the BT SoC that it + * can wakeup the system anytime from suspend state by + * pulling RX low (by sending wakeup bytes). + */ + bias-pull-down; + }; + + /* For mos_bt_uart */ + qup_uart7_sleep_rx: qup-uart7-sleep-rx-pins { + pins = "gpio31"; + function = "gpio"; + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module + * is floating which may cause spurious wakeups. + */ + bias-pull-up; + }; + + /* For mos_bt_uart */ + qup_uart7_sleep_tx: qup-uart7-sleep-tx-pins { + pins = "gpio30"; + function = "gpio"; + /* + * Configure pull-up on TX when it isn't actively driven + * to prevent BT SoC from receiving garbage during sleep. + */ + bias-pull-up; + }; + + ts_int_conn: ts-int-conn-pins { + pins = "gpio55"; + function = "gpio"; + bias-pull-up; + }; + + ts_rst_conn: ts-rst-conn-pins { + pins = "gpio54"; + function = "gpio"; + drive-strength = <2>; + }; + + us_euro_hs_sel: us-euro-hs-sel { + pins = "gpio81"; + function = "gpio"; + bias-pull-down; + drive-strength = <2>; + }; + + wcd_reset_n: wcd-reset-n { + pins = "gpio83"; + function = "gpio"; + drive-strength = <8>; + }; + + wcd_reset_n_sleep: wcd-reset-n-sleep { + pins = "gpio83"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi new file mode 100644 index 000000000..04106d725 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -0,0 +1,6229 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * sc7280 SoC device tree source + * + * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; + i2c9 = &i2c9; + i2c10 = &i2c10; + i2c11 = &i2c11; + i2c12 = &i2c12; + i2c13 = &i2c13; + i2c14 = &i2c14; + i2c15 = &i2c15; + mmc1 = &sdhc_1; + mmc2 = &sdhc_2; + spi0 = &spi0; + spi1 = &spi1; + spi2 = &spi2; + spi3 = &spi3; + spi4 = &spi4; + spi5 = &spi5; + spi6 = &spi6; + spi7 = &spi7; + spi8 = &spi8; + spi9 = &spi9; + spi10 = &spi10; + spi11 = &spi11; + spi12 = &spi12; + spi13 = &spi13; + spi14 = &spi14; + spi15 = &spi15; + }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + clock-frequency = <76800000>; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + clock-frequency = <32000>; + #clock-cells = <0>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + wlan_ce_mem: memory@4cd000 { + no-map; + reg = <0x0 0x004cd000 0x0 0x1000>; + }; + + hyp_mem: memory@80000000 { + reg = <0x0 0x80000000 0x0 0x600000>; + no-map; + }; + + xbl_mem: memory@80600000 { + reg = <0x0 0x80600000 0x0 0x200000>; + no-map; + }; + + aop_mem: memory@80800000 { + reg = <0x0 0x80800000 0x0 0x60000>; + no-map; + }; + + aop_cmd_db_mem: memory@80860000 { + reg = <0x0 0x80860000 0x0 0x20000>; + compatible = "qcom,cmd-db"; + no-map; + }; + + reserved_xbl_uefi_log: memory@80880000 { + reg = <0x0 0x80884000 0x0 0x10000>; + no-map; + }; + + sec_apps_mem: memory@808ff000 { + reg = <0x0 0x808ff000 0x0 0x1000>; + no-map; + }; + + smem_mem: memory@80900000 { + reg = <0x0 0x80900000 0x0 0x200000>; + no-map; + }; + + cpucp_mem: memory@80b00000 { + no-map; + reg = <0x0 0x80b00000 0x0 0x100000>; + }; + + wlan_fw_mem: memory@80c00000 { + reg = <0x0 0x80c00000 0x0 0xc00000>; + no-map; + }; + + video_mem: memory@8b200000 { + reg = <0x0 0x8b200000 0x0 0x500000>; + no-map; + }; + + ipa_fw_mem: memory@8b700000 { + reg = <0 0x8b700000 0 0x10000>; + no-map; + }; + + rmtfs_mem: memory@9c900000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x9c900000 0x0 0x280000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,kryo"; + reg = <0x0 0x0>; + enable-method = "psci"; + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 + &LITTLE_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; + next-level-cache = <&L2_0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, + <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; + L2_0: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "arm,kryo"; + reg = <0x0 0x100>; + enable-method = "psci"; + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 + &LITTLE_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; + next-level-cache = <&L2_100>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, + <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; + L2_100: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "arm,kryo"; + reg = <0x0 0x200>; + enable-method = "psci"; + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 + &LITTLE_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; + next-level-cache = <&L2_200>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, + <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; + L2_200: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "arm,kryo"; + reg = <0x0 0x300>; + enable-method = "psci"; + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 + &LITTLE_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; + next-level-cache = <&L2_300>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, + <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; + L2_300: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "arm,kryo"; + reg = <0x0 0x400>; + enable-method = "psci"; + cpu-idle-states = <&BIG_CPU_SLEEP_0 + &BIG_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; + next-level-cache = <&L2_400>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, + <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; + qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; + L2_400: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "arm,kryo"; + reg = <0x0 0x500>; + enable-method = "psci"; + cpu-idle-states = <&BIG_CPU_SLEEP_0 + &BIG_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; + next-level-cache = <&L2_500>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, + <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; + qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; + L2_500: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "arm,kryo"; + reg = <0x0 0x600>; + enable-method = "psci"; + cpu-idle-states = <&BIG_CPU_SLEEP_0 + &BIG_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; + next-level-cache = <&L2_600>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, + <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; + qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; + L2_600: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "arm,kryo"; + reg = <0x0 0x700>; + enable-method = "psci"; + cpu-idle-states = <&BIG_CPU_SLEEP_0 + &BIG_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; + next-level-cache = <&L2_700>; + operating-points-v2 = <&cpu7_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, + <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; + qcom,freq-domain = <&cpufreq_hw 2>; + #cooling-cells = <2>; + L2_700: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + + core4 { + cpu = <&CPU4>; + }; + + core5 { + cpu = <&CPU5>; + }; + + core6 { + cpu = <&CPU6>; + }; + + core7 { + cpu = <&CPU7>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "little-power-down"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <549>; + exit-latency-us = <901>; + min-residency-us = <1774>; + local-timer-stop; + }; + + LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 { + compatible = "arm,idle-state"; + idle-state-name = "little-rail-power-down"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <702>; + exit-latency-us = <915>; + min-residency-us = <4001>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "big-power-down"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <523>; + exit-latency-us = <1244>; + min-residency-us = <2207>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_1: cpu-sleep-1-1 { + compatible = "arm,idle-state"; + idle-state-name = "big-rail-power-down"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <526>; + exit-latency-us = <1854>; + min-residency-us = <5555>; + local-timer-stop; + }; + + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "arm,idle-state"; + idle-state-name = "cluster-power-down"; + arm,psci-suspend-param = <0x40003444>; + entry-latency-us = <3263>; + exit-latency-us = <6562>; + min-residency-us = <9926>; + local-timer-stop; + }; + }; + }; + + cpu0_opp_table: opp-table-cpu0 { + compatible = "operating-points-v2"; + opp-shared; + + cpu0_opp_300mhz: opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-peak-kBps = <800000 9600000>; + }; + + cpu0_opp_691mhz: opp-691200000 { + opp-hz = /bits/ 64 <691200000>; + opp-peak-kBps = <800000 17817600>; + }; + + cpu0_opp_806mhz: opp-806400000 { + opp-hz = /bits/ 64 <806400000>; + opp-peak-kBps = <800000 20889600>; + }; + + cpu0_opp_941mhz: opp-940800000 { + opp-hz = /bits/ 64 <940800000>; + opp-peak-kBps = <1804000 24576000>; + }; + + cpu0_opp_1152mhz: opp-1152000000 { + opp-hz = /bits/ 64 <1152000000>; + opp-peak-kBps = <2188000 27033600>; + }; + + cpu0_opp_1325mhz: opp-1324800000 { + opp-hz = /bits/ 64 <1324800000>; + opp-peak-kBps = <2188000 33792000>; + }; + + cpu0_opp_1517mhz: opp-1516800000 { + opp-hz = /bits/ 64 <1516800000>; + opp-peak-kBps = <3072000 38092800>; + }; + + cpu0_opp_1651mhz: opp-1651200000 { + opp-hz = /bits/ 64 <1651200000>; + opp-peak-kBps = <3072000 41779200>; + }; + + cpu0_opp_1805mhz: opp-1804800000 { + opp-hz = /bits/ 64 <1804800000>; + opp-peak-kBps = <4068000 48537600>; + }; + + cpu0_opp_1958mhz: opp-1958400000 { + opp-hz = /bits/ 64 <1958400000>; + opp-peak-kBps = <4068000 48537600>; + }; + + cpu0_opp_2016mhz: opp-2016000000 { + opp-hz = /bits/ 64 <2016000000>; + opp-peak-kBps = <6220000 48537600>; + }; + }; + + cpu4_opp_table: opp-table-cpu4 { + compatible = "operating-points-v2"; + opp-shared; + + cpu4_opp_691mhz: opp-691200000 { + opp-hz = /bits/ 64 <691200000>; + opp-peak-kBps = <1804000 9600000>; + }; + + cpu4_opp_941mhz: opp-940800000 { + opp-hz = /bits/ 64 <940800000>; + opp-peak-kBps = <2188000 17817600>; + }; + + cpu4_opp_1229mhz: opp-1228800000 { + opp-hz = /bits/ 64 <1228800000>; + opp-peak-kBps = <4068000 24576000>; + }; + + cpu4_opp_1344mhz: opp-1344000000 { + opp-hz = /bits/ 64 <1344000000>; + opp-peak-kBps = <4068000 24576000>; + }; + + cpu4_opp_1517mhz: opp-1516800000 { + opp-hz = /bits/ 64 <1516800000>; + opp-peak-kBps = <4068000 24576000>; + }; + + cpu4_opp_1651mhz: opp-1651200000 { + opp-hz = /bits/ 64 <1651200000>; + opp-peak-kBps = <6220000 38092800>; + }; + + cpu4_opp_1901mhz: opp-1900800000 { + opp-hz = /bits/ 64 <1900800000>; + opp-peak-kBps = <6220000 44851200>; + }; + + cpu4_opp_2054mhz: opp-2054400000 { + opp-hz = /bits/ 64 <2054400000>; + opp-peak-kBps = <6220000 44851200>; + }; + + cpu4_opp_2112mhz: opp-2112000000 { + opp-hz = /bits/ 64 <2112000000>; + opp-peak-kBps = <6220000 44851200>; + }; + + cpu4_opp_2131mhz: opp-2131200000 { + opp-hz = /bits/ 64 <2131200000>; + opp-peak-kBps = <6220000 44851200>; + }; + + cpu4_opp_2208mhz: opp-2208000000 { + opp-hz = /bits/ 64 <2208000000>; + opp-peak-kBps = <6220000 44851200>; + }; + + cpu4_opp_2400mhz: opp-2400000000 { + opp-hz = /bits/ 64 <2400000000>; + opp-peak-kBps = <8532000 48537600>; + }; + + cpu4_opp_2611mhz: opp-2611200000 { + opp-hz = /bits/ 64 <2611200000>; + opp-peak-kBps = <8532000 48537600>; + }; + }; + + cpu7_opp_table: opp-table-cpu7 { + compatible = "operating-points-v2"; + opp-shared; + + cpu7_opp_806mhz: opp-806400000 { + opp-hz = /bits/ 64 <806400000>; + opp-peak-kBps = <1804000 9600000>; + }; + + cpu7_opp_1056mhz: opp-1056000000 { + opp-hz = /bits/ 64 <1056000000>; + opp-peak-kBps = <2188000 17817600>; + }; + + cpu7_opp_1325mhz: opp-1324800000 { + opp-hz = /bits/ 64 <1324800000>; + opp-peak-kBps = <4068000 24576000>; + }; + + cpu7_opp_1517mhz: opp-1516800000 { + opp-hz = /bits/ 64 <1516800000>; + opp-peak-kBps = <4068000 24576000>; + }; + + cpu7_opp_1766mhz: opp-1766400000 { + opp-hz = /bits/ 64 <1766400000>; + opp-peak-kBps = <6220000 38092800>; + }; + + cpu7_opp_1862mhz: opp-1862400000 { + opp-hz = /bits/ 64 <1862400000>; + opp-peak-kBps = <6220000 38092800>; + }; + + cpu7_opp_2035mhz: opp-2035200000 { + opp-hz = /bits/ 64 <2035200000>; + opp-peak-kBps = <6220000 38092800>; + }; + + cpu7_opp_2112mhz: opp-2112000000 { + opp-hz = /bits/ 64 <2112000000>; + opp-peak-kBps = <6220000 44851200>; + }; + + cpu7_opp_2208mhz: opp-2208000000 { + opp-hz = /bits/ 64 <2208000000>; + opp-peak-kBps = <6220000 44851200>; + }; + + cpu7_opp_2381mhz: opp-2380800000 { + opp-hz = /bits/ 64 <2380800000>; + opp-peak-kBps = <6832000 44851200>; + }; + + cpu7_opp_2400mhz: opp-2400000000 { + opp-hz = /bits/ 64 <2400000000>; + opp-peak-kBps = <8532000 48537600>; + }; + + cpu7_opp_2515mhz: opp-2515200000 { + opp-hz = /bits/ 64 <2515200000>; + opp-peak-kBps = <8532000 48537600>; + }; + + cpu7_opp_2707mhz: opp-2707200000 { + opp-hz = /bits/ 64 <2707200000>; + opp-peak-kBps = <8532000 48537600>; + }; + + cpu7_opp_3014mhz: opp-3014400000 { + opp-hz = /bits/ 64 <3014400000>; + opp-peak-kBps = <8532000 48537600>; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0 0x80000000 0 0>; + }; + + firmware { + scm { + compatible = "qcom,scm-sc7280", "qcom,scm"; + }; + }; + + clk_virt: interconnect { + compatible = "qcom,sc7280-clk-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + smem { + compatible = "qcom,smem"; + memory-region = <&smem_mem>; + hwlocks = <&tcsr_mutex 3>; + }; + + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-cdsp { + compatible = "qcom,smp2p"; + qcom,smem = <94>, <432>; + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + cdsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + cdsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-mpss { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + ipa_smp2p_out: ipa-ap-to-modem { + qcom,entry-name = "ipa"; + #qcom,smem-state-cells = <1>; + }; + + ipa_smp2p_in: ipa-modem-to-ap { + qcom,entry-name = "ipa"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-wpss { + compatible = "qcom,smp2p"; + qcom,smem = <617>, <616>; + interrupts-extended = <&ipcc IPCC_CLIENT_WPSS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_WPSS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <13>; + + wpss_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + wpss_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = ; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + qspi_opp_table: opp-table-qspi { + compatible = "operating-points-v2"; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-150000000 { + opp-hz = /bits/ 64 <150000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + + qup_opp_table: opp-table-qup { + compatible = "operating-points-v2"; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-128000000 { + opp-hz = /bits/ 64 <128000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + + soc: soc@0 { + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + compatible = "simple-bus"; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-sc7280"; + reg = <0 0x00100000 0 0x1f0000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>, + <0>, <&pcie1_lane>, + <0>, <0>, <0>, + <&usb_1_ssphy>; + clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk", + "pcie_0_pipe_clk", "pcie_1_pipe_clk", + "ufs_phy_rx_symbol_0_clk", "ufs_phy_rx_symbol_1_clk", + "ufs_phy_tx_symbol_0_clk", + "usb3_phy_wrapper_gcc_usb30_pipe_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + power-domains = <&rpmhpd SC7280_CX>; + }; + + ipcc: mailbox@408000 { + compatible = "qcom,sc7280-ipcc", "qcom,ipcc"; + reg = <0 0x00408000 0 0x1000>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <3>; + #mbox-cells = <2>; + }; + + qfprom: efuse@784000 { + compatible = "qcom,sc7280-qfprom", "qcom,qfprom"; + reg = <0 0x00784000 0 0xa20>, + <0 0x00780000 0 0xa20>, + <0 0x00782000 0 0x120>, + <0 0x00786000 0 0x1fff>; + clocks = <&gcc GCC_SEC_CTRL_CLK_SRC>; + clock-names = "core"; + power-domains = <&rpmhpd SC7280_MX>; + #address-cells = <1>; + #size-cells = <1>; + + gpu_speed_bin: gpu_speed_bin@1e9 { + reg = <0x1e9 0x2>; + bits = <5 8>; + }; + }; + + sdhc_1: mmc@7c4000 { + compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk>, <&sdc1_cmd>, <&sdc1_data>, <&sdc1_rclk>; + pinctrl-1 = <&sdc1_clk_sleep>, <&sdc1_cmd_sleep>, <&sdc1_data_sleep>, <&sdc1_rclk_sleep>; + status = "disabled"; + + reg = <0 0x007c4000 0 0x1000>, + <0 0x007c5000 0 0x1000>; + reg-names = "hc", "cqhci"; + + iommus = <&apps_smmu 0xc0 0x0>; + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "core", "xo"; + interconnects = <&aggre1_noc MASTER_SDCC_1 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_SDCC_1 0>; + interconnect-names = "sdhc-ddr","cpu-sdhc"; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&sdhc1_opp_table>; + + bus-width = <8>; + supports-cqe; + dma-coherent; + + qcom,dll-config = <0x0007642c>; + qcom,ddr-config = <0x80040868>; + + mmc-ddr-1_8v; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + + resets = <&gcc GCC_SDCC1_BCR>; + + sdhc1_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <1800000 400000>; + opp-avg-kBps = <100000 0>; + }; + + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <5400000 1600000>; + opp-avg-kBps = <390000 0>; + }; + }; + + }; + + gpi_dma0: dma-controller@900000 { + #dma-cells = <3>; + compatible = "qcom,sc7280-gpi-dma"; + reg = <0 0x00900000 0 0x60000>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + ; + dma-channels = <12>; + dma-channel-mask = <0x7f>; + iommus = <&apps_smmu 0x0136 0x0>; + status = "disabled"; + }; + + qupv3_id_0: geniqup@9c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x009c0000 0 0x2000>; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + iommus = <&apps_smmu 0x123 0x0>; + status = "disabled"; + + i2c0: i2c@980000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00980000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c0_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, + <&gpi_dma0 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi0: spi@980000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00980000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, + <&gpi_dma0 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart0: serial@980000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00980000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart0_cts>, <&qup_uart0_rts>, <&qup_uart0_tx>, <&qup_uart0_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c1: i2c@984000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00984000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c1_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, + <&gpi_dma0 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi1: spi@984000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00984000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, + <&gpi_dma0 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart1: serial@984000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00984000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart1_cts>, <&qup_uart1_rts>, <&qup_uart1_tx>, <&qup_uart1_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c2: i2c@988000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00988000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c2_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, + <&gpi_dma0 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi2: spi@988000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00988000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, + <&gpi_dma0 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart2: serial@988000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00988000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart2_cts>, <&qup_uart2_rts>, <&qup_uart2_tx>, <&qup_uart2_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c3: i2c@98c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0098c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c3_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, + <&gpi_dma0 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi3: spi@98c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0098c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, + <&gpi_dma0 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart3: serial@98c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x0098c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart3_cts>, <&qup_uart3_rts>, <&qup_uart3_tx>, <&qup_uart3_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c4: i2c@990000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00990000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c4_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, + <&gpi_dma0 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi4: spi@990000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00990000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, + <&gpi_dma0 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart4: serial@990000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00990000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart4_cts>, <&qup_uart4_rts>, <&qup_uart4_tx>, <&qup_uart4_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c5: i2c@994000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00994000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c5_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, + <&gpi_dma0 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi5: spi@994000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00994000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, + <&gpi_dma0 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart5: serial@994000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00994000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart5_cts>, <&qup_uart5_rts>, <&qup_uart5_tx>, <&qup_uart5_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c6: i2c@998000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00998000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c6_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>, + <&gpi_dma0 1 6 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi6: spi@998000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00998000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>, + <&gpi_dma0 1 6 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart6: serial@998000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00998000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart6_cts>, <&qup_uart6_rts>, <&qup_uart6_tx>, <&qup_uart6_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c7: i2c@99c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0099c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c7_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>, + <&gpi_dma0 1 7 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi7: spi@99c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0099c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>, + <&gpi_dma0 1 7 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart7: serial@99c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x0099c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart7_cts>, <&qup_uart7_rts>, <&qup_uart7_tx>, <&qup_uart7_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + }; + + gpi_dma1: dma-controller@a00000 { + #dma-cells = <3>; + compatible = "qcom,sc7280-gpi-dma"; + reg = <0 0x00a00000 0 0x60000>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + ; + dma-channels = <12>; + dma-channel-mask = <0x1e>; + iommus = <&apps_smmu 0x56 0x0>; + status = "disabled"; + }; + + qupv3_id_1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x00ac0000 0 0x2000>; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + iommus = <&apps_smmu 0x43 0x0>; + status = "disabled"; + + i2c8: i2c@a80000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a80000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c8_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, + <&gpi_dma1 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi8: spi@a80000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a80000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, + <&gpi_dma1 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart8: serial@a80000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a80000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart8_cts>, <&qup_uart8_rts>, <&qup_uart8_tx>, <&qup_uart8_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c9: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a84000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c9_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, + <&gpi_dma1 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi9: spi@a84000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a84000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, + <&gpi_dma1 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart9: serial@a84000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a84000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart9_cts>, <&qup_uart9_rts>, <&qup_uart9_tx>, <&qup_uart9_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c10: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a88000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c10_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, + <&gpi_dma1 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi10: spi@a88000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a88000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, + <&gpi_dma1 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart10: serial@a88000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a88000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart10_cts>, <&qup_uart10_rts>, <&qup_uart10_tx>, <&qup_uart10_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c11: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a8c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c11_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, + <&gpi_dma1 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi11: spi@a8c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a8c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, + <&gpi_dma1 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart11: serial@a8c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a8c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart11_cts>, <&qup_uart11_rts>, <&qup_uart11_tx>, <&qup_uart11_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c12: i2c@a90000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a90000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c12_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, + <&gpi_dma1 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi12: spi@a90000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a90000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, + <&gpi_dma1 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart12: serial@a90000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a90000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart12_cts>, <&qup_uart12_rts>, <&qup_uart12_tx>, <&qup_uart12_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c13: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a94000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c13_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, + <&gpi_dma1 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi13: spi@a94000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a94000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>, + <&gpi_dma1 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart13: serial@a94000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a94000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart13_cts>, <&qup_uart13_rts>, <&qup_uart13_tx>, <&qup_uart13_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c14: i2c@a98000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a98000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c14_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>, + <&gpi_dma1 1 6 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi14: spi@a98000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a98000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>, + <&gpi_dma1 1 6 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart14: serial@a98000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a98000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart14_cts>, <&qup_uart14_rts>, <&qup_uart14_tx>, <&qup_uart14_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c15: i2c@a9c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a9c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c15_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>, + <&gpi_dma1 1 7 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi15: spi@a9c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a9c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>, + <&gpi_dma1 1 7 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart15: serial@a9c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a9c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart15_cts>, <&qup_uart15_rts>, <&qup_uart15_tx>, <&qup_uart15_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + }; + + cnoc2: interconnect@1500000 { + reg = <0 0x01500000 0 0x1000>; + compatible = "qcom,sc7280-cnoc2"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + cnoc3: interconnect@1502000 { + reg = <0 0x01502000 0 0x1000>; + compatible = "qcom,sc7280-cnoc3"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mc_virt: interconnect@1580000 { + reg = <0 0x01580000 0 0x4>; + compatible = "qcom,sc7280-mc-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect@1680000 { + reg = <0 0x01680000 0 0x15480>; + compatible = "qcom,sc7280-system-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre1_noc: interconnect@16e0000 { + compatible = "qcom,sc7280-aggre1-noc"; + reg = <0 0x016e0000 0 0x1c080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre2_noc: interconnect@1700000 { + reg = <0 0x01700000 0 0x2b080>; + compatible = "qcom,sc7280-aggre2-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mmss_noc: interconnect@1740000 { + reg = <0 0x01740000 0 0x1e080>; + compatible = "qcom,sc7280-mmss-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + wifi: wifi@17a10040 { + compatible = "qcom,wcn6750-wifi"; + reg = <0 0x17a10040 0 0x0>; + iommus = <&apps_smmu 0x1c00 0x1>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + qcom,rproc = <&remoteproc_wpss>; + memory-region = <&wlan_fw_mem>, <&wlan_ce_mem>; + status = "disabled"; + }; + + pcie1: pci@1c08000 { + compatible = "qcom,pcie-sc7280"; + reg = <0 0x01c08000 0 0x3000>, + <0 0x40000000 0 0xf1d>, + <0 0x40000f20 0 0xa8>, + <0 0x40001000 0 0x1000>, + <0 0x40100000 0 0x100000>; + + reg-names = "parf", "dbi", "elbi", "atu", "config"; + device_type = "pci"; + linux,pci-domain = <1>; + bus-range = <0x00 0xff>; + num-lanes = <2>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; + + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, + <&gcc GCC_PCIE_1_PIPE_CLK_SRC>, + <&pcie1_lane>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_CENTER_SF_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>; + + clock-names = "pipe", + "pipe_mux", + "phy_pipe", + "ref", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "tbu", + "ddrss_sf_tbu", + "aggre0", + "aggre1"; + + assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; + assigned-clock-rates = <19200000>; + + resets = <&gcc GCC_PCIE_1_BCR>; + reset-names = "pci"; + + power-domains = <&gcc GCC_PCIE_1_GDSC>; + + phys = <&pcie1_lane>; + phy-names = "pciephy"; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_clkreq_n>; + + dma-coherent; + + iommus = <&apps_smmu 0x1c80 0x1>; + + iommu-map = <0x0 &apps_smmu 0x1c80 0x1>, + <0x100 &apps_smmu 0x1c81 0x1>; + + status = "disabled"; + }; + + pcie1_phy: phy@1c0e000 { + compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy"; + reg = <0 0x01c0e000 0 0x1c0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_CLKREF_EN>, + <&gcc GCC_PCIE1_PHY_RCHNG_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "refgen"; + + resets = <&gcc GCC_PCIE_1_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE1_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie1_lane: phy@1c0e200 { + reg = <0 0x01c0e200 0 0x170>, + <0 0x01c0e400 0 0x200>, + <0 0x01c0ea00 0 0x1f0>, + <0 0x01c0e600 0 0x170>, + <0 0x01c0e800 0 0x200>, + <0 0x01c0ee00 0 0xf4>; + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; + clock-names = "pipe0"; + + #phy-cells = <0>; + #clock-cells = <0>; + clock-output-names = "pcie_1_pipe_clk"; + }; + }; + + ipa: ipa@1e40000 { + compatible = "qcom,sc7280-ipa"; + + iommus = <&apps_smmu 0x480 0x0>, + <&apps_smmu 0x482 0x0>; + reg = <0 0x1e40000 0 0x8000>, + <0 0x1e50000 0 0x4ad0>, + <0 0x1e04000 0 0x23000>; + reg-names = "ipa-reg", + "ipa-shared", + "gsi"; + + interrupts-extended = <&intc GIC_SPI 654 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>, + <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ipa", + "gsi", + "ipa-clock-query", + "ipa-setup-ready"; + + clocks = <&rpmhcc RPMH_IPA_CLK>; + clock-names = "core"; + + interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_IPA_CFG 0>; + interconnect-names = "memory", + "config"; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&ipa_smp2p_out 0>, + <&ipa_smp2p_out 1>; + qcom,smem-state-names = "ipa-clock-enabled-valid", + "ipa-clock-enabled"; + + status = "disabled"; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0 0x01f40000 0 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr_1: syscon@1f60000 { + compatible = "qcom,sc7280-tcsr", "syscon"; + reg = <0 0x01f60000 0 0x20000>; + }; + + tcsr_2: syscon@1fc0000 { + compatible = "qcom,sc7280-tcsr", "syscon"; + reg = <0 0x01fc0000 0 0x30000>; + }; + + lpasscc: lpasscc@3000000 { + compatible = "qcom,sc7280-lpasscc"; + reg = <0 0x03000000 0 0x40>, + <0 0x03c04000 0 0x4>; + reg-names = "qdsp6ss", "top_cc"; + clocks = <&gcc GCC_CFG_NOC_LPASS_CLK>; + clock-names = "iface"; + #clock-cells = <1>; + status = "reserved"; /* Owned by ADSP firmware */ + }; + + lpass_rx_macro: codec@3200000 { + compatible = "qcom,sc7280-lpass-rx-macro"; + reg = <0 0x03200000 0 0x1000>; + + pinctrl-names = "default"; + pinctrl-0 = <&lpass_rx_swr_clk>, <&lpass_rx_swr_data>; + + clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>, + <&lpass_aon LPASS_AON_CC_TX_MCLK_2X_CLK>, + <&lpass_va_macro>; + clock-names = "mclk", "npl", "fsgen"; + + power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>, + <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>; + power-domain-names = "macro", "dcodec"; + + #clock-cells = <0>; + #sound-dai-cells = <1>; + + status = "disabled"; + }; + + swr0: soundwire@3210000 { + compatible = "qcom,soundwire-v1.6.0"; + reg = <0 0x03210000 0 0x2000>; + + interrupts = ; + clocks = <&lpass_rx_macro>; + clock-names = "iface"; + + qcom,din-ports = <0>; + qcom,dout-ports = <5>; + + resets = <&lpass_audiocc LPASS_AUDIO_SWR_RX_CGCR>; + reset-names = "swr_audio_cgcr"; + + qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff>; + qcom,ports-sinterval-low = /bits/ 8 <0x03 0x3f 0x1f 0x03 0x03>; + qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x01 0x01>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00>; + qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0x00>; + + #sound-dai-cells = <1>; + #address-cells = <2>; + #size-cells = <0>; + + status = "disabled"; + }; + + lpass_tx_macro: codec@3220000 { + compatible = "qcom,sc7280-lpass-tx-macro"; + reg = <0 0x03220000 0 0x1000>; + + pinctrl-names = "default"; + pinctrl-0 = <&lpass_tx_swr_clk>, <&lpass_tx_swr_data>; + + clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>, + <&lpass_aon LPASS_AON_CC_TX_MCLK_2X_CLK>, + <&lpass_va_macro>; + clock-names = "mclk", "npl", "fsgen"; + + power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>, + <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>; + power-domain-names = "macro", "dcodec"; + + #clock-cells = <0>; + #sound-dai-cells = <1>; + + status = "disabled"; + }; + + swr1: soundwire@3230000 { + compatible = "qcom,soundwire-v1.6.0"; + reg = <0 0x03230000 0 0x2000>; + + interrupts-extended = <&intc GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 130 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&lpass_tx_macro>; + clock-names = "iface"; + + qcom,din-ports = <3>; + qcom,dout-ports = <0>; + + resets = <&lpass_audiocc LPASS_AUDIO_SWR_TX_CGCR>; + reset-names = "swr_audio_cgcr"; + + qcom,ports-sinterval-low = /bits/ 8 <0x01 0x03 0x03>; + qcom,ports-offset1 = /bits/ 8 <0x01 0x00 0x02>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x00>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff>; + qcom,ports-word-length = /bits/ 8 <0xff 0x00 0xff>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0xff>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0x00 0x01 0x00>; + qcom,port-offset = <1>; + + #sound-dai-cells = <1>; + #address-cells = <2>; + #size-cells = <0>; + + status = "disabled"; + }; + + lpass_audiocc: clock-controller@3300000 { + compatible = "qcom,sc7280-lpassaudiocc"; + reg = <0 0x03300000 0 0x30000>, + <0 0x032a9000 0 0x1000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&lpass_aon LPASS_AON_CC_MAIN_RCG_CLK_SRC>; + clock-names = "bi_tcxo", "lpass_aon_cc_main_rcg_clk_src"; + power-domains = <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>; + #clock-cells = <1>; + #power-domain-cells = <1>; + #reset-cells = <1>; + }; + + lpass_va_macro: codec@3370000 { + compatible = "qcom,sc7280-lpass-va-macro"; + reg = <0 0x03370000 0 0x1000>; + + pinctrl-names = "default"; + pinctrl-0 = <&lpass_dmic01_clk>, <&lpass_dmic01_data>; + + clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>; + clock-names = "mclk"; + + power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>, + <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>; + power-domain-names = "macro", "dcodec"; + + #clock-cells = <0>; + #sound-dai-cells = <1>; + + status = "disabled"; + }; + + lpass_aon: clock-controller@3380000 { + compatible = "qcom,sc7280-lpassaoncc"; + reg = <0 0x03380000 0 0x30000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&lpass_core LPASS_CORE_CC_CORE_CLK>; + clock-names = "bi_tcxo", "bi_tcxo_ao", "iface"; + #clock-cells = <1>; + #power-domain-cells = <1>; + status = "reserved"; /* Owned by ADSP firmware */ + }; + + lpass_core: clock-controller@3900000 { + compatible = "qcom,sc7280-lpasscorecc"; + reg = <0 0x03900000 0 0x50000>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "bi_tcxo"; + power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>; + #clock-cells = <1>; + #power-domain-cells = <1>; + status = "reserved"; /* Owned by ADSP firmware */ + }; + + lpass_cpu: audio@3987000 { + compatible = "qcom,sc7280-lpass-cpu"; + + reg = <0 0x03987000 0 0x68000>, + <0 0x03b00000 0 0x29000>, + <0 0x03260000 0 0xc000>, + <0 0x03280000 0 0x29000>, + <0 0x03340000 0 0x29000>, + <0 0x0336c000 0 0x3000>; + reg-names = "lpass-hdmiif", + "lpass-lpaif", + "lpass-rxtx-cdc-dma-lpm", + "lpass-rxtx-lpaif", + "lpass-va-lpaif", + "lpass-va-cdc-dma-lpm"; + + iommus = <&apps_smmu 0x1820 0>, + <&apps_smmu 0x1821 0>, + <&apps_smmu 0x1832 0>; + + power-domains = <&rpmhpd SC7280_LCX>; + power-domain-names = "lcx"; + required-opps = <&rpmhpd_opp_nom>; + + clocks = <&lpass_aon LPASS_AON_CC_AUDIO_HM_H_CLK>, + <&lpass_core LPASS_CORE_CC_EXT_MCLK0_CLK>, + <&lpass_core LPASS_CORE_CC_SYSNOC_MPORT_CORE_CLK>, + <&lpass_core LPASS_CORE_CC_EXT_IF0_IBIT_CLK>, + <&lpass_core LPASS_CORE_CC_EXT_IF1_IBIT_CLK>, + <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM_CLK>, + <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM0_CLK>, + <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM1_CLK>, + <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM2_CLK>, + <&lpass_aon LPASS_AON_CC_VA_MEM0_CLK>; + clock-names = "aon_cc_audio_hm_h", + "audio_cc_ext_mclk0", + "core_cc_sysnoc_mport_core", + "core_cc_ext_if0_ibit", + "core_cc_ext_if1_ibit", + "audio_cc_codec_mem", + "audio_cc_codec_mem0", + "audio_cc_codec_mem1", + "audio_cc_codec_mem2", + "aon_cc_va_mem0"; + + #sound-dai-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + interrupts = , + , + , + ; + interrupt-names = "lpass-irq-lpaif", + "lpass-irq-hdmi", + "lpass-irq-vaif", + "lpass-irq-rxtxif"; + + status = "disabled"; + }; + + lpass_hm: clock-controller@3c00000 { + compatible = "qcom,sc7280-lpasshm"; + reg = <0 0x3c00000 0 0x28>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "bi_tcxo"; + #clock-cells = <1>; + #power-domain-cells = <1>; + status = "reserved"; /* Owned by ADSP firmware */ + }; + + lpass_ag_noc: interconnect@3c40000 { + reg = <0 0x03c40000 0 0xf080>; + compatible = "qcom,sc7280-lpass-ag-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + lpass_tlmm: pinctrl@33c0000 { + compatible = "qcom,sc7280-lpass-lpi-pinctrl"; + reg = <0 0x033c0000 0x0 0x20000>, + <0 0x03550000 0x0 0x10000>; + qcom,adsp-bypass-mode; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 15>; + + #clock-cells = <1>; + + lpass_dmic01_clk: dmic01-clk { + pins = "gpio6"; + function = "dmic1_clk"; + }; + + lpass_dmic01_clk_sleep: dmic01-clk-sleep { + pins = "gpio6"; + function = "dmic1_clk"; + }; + + lpass_dmic01_data: dmic01-data { + pins = "gpio7"; + function = "dmic1_data"; + }; + + lpass_dmic01_data_sleep: dmic01-data-sleep { + pins = "gpio7"; + function = "dmic1_data"; + }; + + lpass_dmic23_clk: dmic23-clk { + pins = "gpio8"; + function = "dmic2_clk"; + }; + + lpass_dmic23_clk_sleep: dmic23-clk-sleep { + pins = "gpio8"; + function = "dmic2_clk"; + }; + + lpass_dmic23_data: dmic23-data { + pins = "gpio9"; + function = "dmic2_data"; + }; + + lpass_dmic23_data_sleep: dmic23-data-sleep { + pins = "gpio9"; + function = "dmic2_data"; + }; + + lpass_rx_swr_clk: rx-swr-clk { + pins = "gpio3"; + function = "swr_rx_clk"; + }; + + lpass_rx_swr_clk_sleep: rx-swr-clk-sleep { + pins = "gpio3"; + function = "swr_rx_clk"; + }; + + lpass_rx_swr_data: rx-swr-data { + pins = "gpio4", "gpio5"; + function = "swr_rx_data"; + }; + + lpass_rx_swr_data_sleep: rx-swr-data-sleep { + pins = "gpio4", "gpio5"; + function = "swr_rx_data"; + }; + + lpass_tx_swr_clk: tx-swr-clk { + pins = "gpio0"; + function = "swr_tx_clk"; + }; + + lpass_tx_swr_clk_sleep: tx-swr-clk-sleep { + pins = "gpio0"; + function = "swr_tx_clk"; + }; + + lpass_tx_swr_data: tx-swr-data { + pins = "gpio1", "gpio2", "gpio14"; + function = "swr_tx_data"; + }; + + lpass_tx_swr_data_sleep: tx-swr-data-sleep { + pins = "gpio1", "gpio2", "gpio14"; + function = "swr_tx_data"; + }; + }; + + gpu: gpu@3d00000 { + compatible = "qcom,adreno-635.0", "qcom,adreno"; + reg = <0 0x03d00000 0 0x40000>, + <0 0x03d9e000 0 0x1000>, + <0 0x03d61000 0 0x800>; + reg-names = "kgsl_3d0_reg_memory", + "cx_mem", + "cx_dbgc"; + interrupts = ; + iommus = <&adreno_smmu 0 0x400>, + <&adreno_smmu 1 0x400>; + operating-points-v2 = <&gpu_opp_table>; + qcom,gmu = <&gmu>; + interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "gfx-mem"; + #cooling-cells = <2>; + + nvmem-cells = <&gpu_speed_bin>; + nvmem-cell-names = "speed_bin"; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-315000000 { + opp-hz = /bits/ 64 <315000000>; + opp-level = ; + opp-peak-kBps = <1804000>; + opp-supported-hw = <0x03>; + }; + + opp-450000000 { + opp-hz = /bits/ 64 <450000000>; + opp-level = ; + opp-peak-kBps = <4068000>; + opp-supported-hw = <0x03>; + }; + + /* Only applicable for SKUs which has 550Mhz as Fmax */ + opp-550000000-0 { + opp-hz = /bits/ 64 <550000000>; + opp-level = ; + opp-peak-kBps = <8368000>; + opp-supported-hw = <0x01>; + }; + + opp-550000000-1 { + opp-hz = /bits/ 64 <550000000>; + opp-level = ; + opp-peak-kBps = <6832000>; + opp-supported-hw = <0x02>; + }; + + opp-608000000 { + opp-hz = /bits/ 64 <608000000>; + opp-level = ; + opp-peak-kBps = <8368000>; + opp-supported-hw = <0x02>; + }; + + opp-700000000 { + opp-hz = /bits/ 64 <700000000>; + opp-level = ; + opp-peak-kBps = <8532000>; + opp-supported-hw = <0x02>; + }; + + opp-812000000 { + opp-hz = /bits/ 64 <812000000>; + opp-level = ; + opp-peak-kBps = <8532000>; + opp-supported-hw = <0x02>; + }; + + opp-840000000 { + opp-hz = /bits/ 64 <840000000>; + opp-level = ; + opp-peak-kBps = <8532000>; + opp-supported-hw = <0x02>; + }; + + opp-900000000 { + opp-hz = /bits/ 64 <900000000>; + opp-level = ; + opp-peak-kBps = <8532000>; + opp-supported-hw = <0x02>; + }; + }; + }; + + gmu: gmu@3d6a000 { + compatible = "qcom,adreno-gmu-635.0", "qcom,adreno-gmu"; + reg = <0 0x03d6a000 0 0x34000>, + <0 0x3de0000 0 0x10000>, + <0 0x0b290000 0 0x10000>; + reg-names = "gmu", "rscc", "gmu_pdc"; + interrupts = , + ; + interrupt-names = "hfi", "gmu"; + clocks = <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_CXO_CLK>, + <&gcc GCC_DDRSS_GPU_AXI_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gpucc GPU_CC_AHB_CLK>, + <&gpucc GPU_CC_HUB_CX_INT_CLK>, + <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>; + clock-names = "gmu", + "cxo", + "axi", + "memnoc", + "ahb", + "hub", + "smmu_vote"; + power-domains = <&gpucc GPU_CC_CX_GDSC>, + <&gpucc GPU_CC_GX_GDSC>; + power-domain-names = "cx", + "gx"; + iommus = <&adreno_smmu 5 0x400>; + operating-points-v2 = <&gmu_opp_table>; + + gmu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-level = ; + }; + }; + }; + + gpucc: clock-controller@3d90000 { + compatible = "qcom,sc7280-gpucc"; + reg = <0 0x03d90000 0 0x9000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + clock-names = "bi_tcxo", + "gcc_gpu_gpll0_clk_src", + "gcc_gpu_gpll0_div_clk_src"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + adreno_smmu: iommu@3da0000 { + compatible = "qcom,sc7280-smmu-500", "qcom,adreno-smmu", "arm,mmu-500"; + reg = <0 0x03da0000 0 0x20000>; + #iommu-cells = <2>; + #global-interrupts = <2>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + ; + + clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>, + <&gpucc GPU_CC_AHB_CLK>, + <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>, + <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_HUB_CX_INT_CLK>, + <&gpucc GPU_CC_HUB_AON_CLK>; + clock-names = "gcc_gpu_memnoc_gfx_clk", + "gcc_gpu_snoc_dvm_gfx_clk", + "gpu_cc_ahb_clk", + "gpu_cc_hlos1_vote_gpu_smmu_clk", + "gpu_cc_cx_gmu_clk", + "gpu_cc_hub_cx_int_clk", + "gpu_cc_hub_aon_clk"; + + power-domains = <&gpucc GPU_CC_CX_GDSC>; + dma-coherent; + }; + + remoteproc_mpss: remoteproc@4080000 { + compatible = "qcom,sc7280-mpss-pas"; + reg = <0 0x04080000 0 0x10000>, <0 0x04180000 0 0x48>; + reg-names = "qdsp6", "rmb"; + + interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_MSS_OFFLINE_AXI_CLK>, + <&gcc GCC_MSS_SNOC_AXI_CLK>, + <&rpmhcc RPMH_PKA_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "offline", "snoc_axi", "pka", "xo"; + + power-domains = <&rpmhpd SC7280_CX>, + <&rpmhpd SC7280_MSS>; + power-domain-names = "cx", "mss"; + + memory-region = <&mpss_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + resets = <&aoss_reset AOSS_CC_MSS_RESTART>, + <&pdc_reset PDC_MODEM_SYNC_RESET>; + reset-names = "mss_restart", "pdc_reset"; + + qcom,halt-regs = <&tcsr_1 0x3000 0x5000 0x8000 0x13000>; + qcom,ext-regs = <&tcsr_2 0x10000 0x10004 &tcsr_1 0x6004 0x6008>; + qcom,qaccept-regs = <&tcsr_1 0x3030 0x3040 0x3020>; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + label = "modem"; + qcom,remote-pid = <1>; + }; + }; + + stm@6002000 { + compatible = "arm,coresight-stm", "arm,primecell"; + reg = <0 0x06002000 0 0x1000>, + <0 0x16280000 0 0x180000>; + reg-names = "stm-base", "stm-stimulus-base"; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + stm_out: endpoint { + remote-endpoint = <&funnel0_in7>; + }; + }; + }; + }; + + funnel@6041000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06041000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel0_out: endpoint { + remote-endpoint = <&merge_funnel_in0>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@7 { + reg = <7>; + funnel0_in7: endpoint { + remote-endpoint = <&stm_out>; + }; + }; + }; + }; + + funnel@6042000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06042000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel1_out: endpoint { + remote-endpoint = <&merge_funnel_in1>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@4 { + reg = <4>; + funnel1_in4: endpoint { + remote-endpoint = <&apss_merge_funnel_out>; + }; + }; + }; + }; + + funnel@6045000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06045000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + merge_funnel_out: endpoint { + remote-endpoint = <&swao_funnel_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + merge_funnel_in0: endpoint { + remote-endpoint = <&funnel0_out>; + }; + }; + + port@1 { + reg = <1>; + merge_funnel_in1: endpoint { + remote-endpoint = <&funnel1_out>; + }; + }; + }; + }; + + replicator@6046000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0 0x06046000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + replicator_out: endpoint { + remote-endpoint = <&etr_in>; + }; + }; + }; + + in-ports { + port { + replicator_in: endpoint { + remote-endpoint = <&swao_replicator_out>; + }; + }; + }; + }; + + etr@6048000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x06048000 0 0x1000>; + iommus = <&apps_smmu 0x04c0 0>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,scatter-gather; + + in-ports { + port { + etr_in: endpoint { + remote-endpoint = <&replicator_out>; + }; + }; + }; + }; + + funnel@6b04000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06b04000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + swao_funnel_out: endpoint { + remote-endpoint = <&etf_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@7 { + reg = <7>; + swao_funnel_in: endpoint { + remote-endpoint = <&merge_funnel_out>; + }; + }; + }; + }; + + etf@6b05000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x06b05000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + etf_out: endpoint { + remote-endpoint = <&swao_replicator_in>; + }; + }; + }; + + in-ports { + port { + etf_in: endpoint { + remote-endpoint = <&swao_funnel_out>; + }; + }; + }; + }; + + replicator@6b06000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0 0x06b06000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + qcom,replicator-loses-context; + + out-ports { + port { + swao_replicator_out: endpoint { + remote-endpoint = <&replicator_in>; + }; + }; + }; + + in-ports { + port { + swao_replicator_in: endpoint { + remote-endpoint = <&etf_out>; + }; + }; + }; + }; + + etm@7040000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07040000 0 0x1000>; + + cpu = <&CPU0>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = <&apss_funnel_in0>; + }; + }; + }; + }; + + etm@7140000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07140000 0 0x1000>; + + cpu = <&CPU1>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = <&apss_funnel_in1>; + }; + }; + }; + }; + + etm@7240000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07240000 0 0x1000>; + + cpu = <&CPU2>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = <&apss_funnel_in2>; + }; + }; + }; + }; + + etm@7340000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07340000 0 0x1000>; + + cpu = <&CPU3>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = <&apss_funnel_in3>; + }; + }; + }; + }; + + etm@7440000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07440000 0 0x1000>; + + cpu = <&CPU4>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm4_out: endpoint { + remote-endpoint = <&apss_funnel_in4>; + }; + }; + }; + }; + + etm@7540000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07540000 0 0x1000>; + + cpu = <&CPU5>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm5_out: endpoint { + remote-endpoint = <&apss_funnel_in5>; + }; + }; + }; + }; + + etm@7640000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07640000 0 0x1000>; + + cpu = <&CPU6>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm6_out: endpoint { + remote-endpoint = <&apss_funnel_in6>; + }; + }; + }; + }; + + etm@7740000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07740000 0 0x1000>; + + cpu = <&CPU7>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm7_out: endpoint { + remote-endpoint = <&apss_funnel_in7>; + }; + }; + }; + }; + + funnel@7800000 { /* APSS Funnel */ + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x07800000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + apss_funnel_out: endpoint { + remote-endpoint = <&apss_merge_funnel_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + apss_funnel_in0: endpoint { + remote-endpoint = <&etm0_out>; + }; + }; + + port@1 { + reg = <1>; + apss_funnel_in1: endpoint { + remote-endpoint = <&etm1_out>; + }; + }; + + port@2 { + reg = <2>; + apss_funnel_in2: endpoint { + remote-endpoint = <&etm2_out>; + }; + }; + + port@3 { + reg = <3>; + apss_funnel_in3: endpoint { + remote-endpoint = <&etm3_out>; + }; + }; + + port@4 { + reg = <4>; + apss_funnel_in4: endpoint { + remote-endpoint = <&etm4_out>; + }; + }; + + port@5 { + reg = <5>; + apss_funnel_in5: endpoint { + remote-endpoint = <&etm5_out>; + }; + }; + + port@6 { + reg = <6>; + apss_funnel_in6: endpoint { + remote-endpoint = <&etm6_out>; + }; + }; + + port@7 { + reg = <7>; + apss_funnel_in7: endpoint { + remote-endpoint = <&etm7_out>; + }; + }; + }; + }; + + funnel@7810000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x07810000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + apss_merge_funnel_out: endpoint { + remote-endpoint = <&funnel1_in4>; + }; + }; + }; + + in-ports { + port { + apss_merge_funnel_in: endpoint { + remote-endpoint = <&apss_funnel_out>; + }; + }; + }; + }; + + sdhc_2: mmc@8804000 { + compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>; + pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>; + status = "disabled"; + + reg = <0 0x08804000 0 0x1000>; + + iommus = <&apps_smmu 0x100 0x0>; + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "core", "xo"; + interconnects = <&aggre1_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_SDCC_2 0>; + interconnect-names = "sdhc-ddr","cpu-sdhc"; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&sdhc2_opp_table>; + + bus-width = <4>; + dma-coherent; + + qcom,dll-config = <0x0007642c>; + + resets = <&gcc GCC_SDCC2_BCR>; + + sdhc2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <1800000 400000>; + opp-avg-kBps = <100000 0>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <5400000 1600000>; + opp-avg-kBps = <200000 0>; + }; + }; + + }; + + usb_1_hsphy: phy@88e3000 { + compatible = "qcom,sc7280-usb-hs-phy", + "qcom,usb-snps-hs-7nm-phy"; + reg = <0 0x088e3000 0 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + }; + + usb_2_hsphy: phy@88e4000 { + compatible = "qcom,sc7280-usb-hs-phy", + "qcom,usb-snps-hs-7nm-phy"; + reg = <0 0x088e4000 0 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; + }; + + usb_1_qmpphy: phy-wrapper@88e9000 { + compatible = "qcom,sc7280-qmp-usb3-dp-phy", + "qcom,sm8250-qmp-usb3-dp-phy"; + reg = <0 0x088e9000 0 0x200>, + <0 0x088e8000 0 0x40>, + <0 0x088ea000 0 0x200>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; + clock-names = "aux", "ref_clk_src", "com_aux"; + + resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, + <&gcc GCC_USB3_PHY_PRIM_BCR>; + reset-names = "phy", "common"; + + usb_1_ssphy: usb3-phy@88e9200 { + reg = <0 0x088e9200 0 0x200>, + <0 0x088e9400 0 0x200>, + <0 0x088e9c00 0 0x400>, + <0 0x088e9600 0 0x200>, + <0 0x088e9800 0 0x200>, + <0 0x088e9a00 0 0x100>; + #clock-cells = <0>; + #phy-cells = <0>; + clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_phy_pipe_clk_src"; + }; + + dp_phy: dp-phy@88ea200 { + reg = <0 0x088ea200 0 0x200>, + <0 0x088ea400 0 0x200>, + <0 0x088eaa00 0 0x200>, + <0 0x088ea600 0 0x200>, + <0 0x088ea800 0 0x200>; + #phy-cells = <0>; + #clock-cells = <1>; + }; + }; + + usb_2: usb@8cf8800 { + compatible = "qcom,sc7280-dwc3", "qcom,dwc3"; + reg = <0 0x08cf8800 0 0x400>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + dma-ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_SLEEP_CLK>, + <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 12 IRQ_TYPE_EDGE_BOTH>, + <&pdc 13 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "hs_phy_irq", + "dp_hs_phy_irq", + "dm_hs_phy_irq"; + + power-domains = <&gcc GCC_USB30_SEC_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + resets = <&gcc GCC_USB30_SEC_BCR>; + + interconnects = <&aggre1_noc MASTER_USB2 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_USB2 0>; + interconnect-names = "usb-ddr", "apps-usb"; + + usb_2_dwc3: usb@8c00000 { + compatible = "snps,dwc3"; + reg = <0 0x08c00000 0 0xe000>; + interrupts = ; + iommus = <&apps_smmu 0xa0 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_2_hsphy>; + phy-names = "usb2-phy"; + maximum-speed = "high-speed"; + usb-role-switch; + port { + usb2_role_switch: endpoint { + remote-endpoint = <&eud_ep>; + }; + }; + }; + }; + + qspi: spi@88dc000 { + compatible = "qcom,sc7280-qspi", "qcom,qspi-v1"; + reg = <0 0x088dc000 0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>, + <&gcc GCC_QSPI_CORE_CLK>; + clock-names = "iface", "core"; + interconnects = <&gem_noc MASTER_APPSS_PROC 0 + &cnoc2 SLAVE_QSPI_0 0>; + interconnect-names = "qspi-config"; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qspi_opp_table>; + status = "disabled"; + }; + + remoteproc_wpss: remoteproc@8a00000 { + compatible = "qcom,sc7280-wpss-pil"; + reg = <0 0x08a00000 0 0x10000>; + + interrupts-extended = <&intc GIC_SPI 587 IRQ_TYPE_EDGE_RISING>, + <&wpss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&wpss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&wpss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&wpss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&wpss_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + clocks = <&gcc GCC_WPSS_AHB_BDG_MST_CLK>, + <&gcc GCC_WPSS_AHB_CLK>, + <&gcc GCC_WPSS_RSCP_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ahb_bdg", "ahb", + "rscp", "xo"; + + power-domains = <&rpmhpd SC7280_CX>, + <&rpmhpd SC7280_MX>; + power-domain-names = "cx", "mx"; + + memory-region = <&wpss_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&wpss_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + resets = <&aoss_reset AOSS_CC_WCSS_RESTART>, + <&pdc_reset PDC_WPSS_SYNC_RESET>; + reset-names = "restart", "pdc_sync"; + + qcom,halt-regs = <&tcsr_1 0x17000>; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_WPSS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_WPSS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "wpss"; + qcom,remote-pid = <13>; + }; + }; + + pmu@9091000 { + compatible = "qcom,sc7280-llcc-bwmon"; + reg = <0 0x9091000 0 0x1000>; + + interrupts = ; + + interconnects = <&mc_virt MASTER_LLCC 3 &mc_virt SLAVE_EBI1 3>; + + operating-points-v2 = <&llcc_bwmon_opp_table>; + + llcc_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-0 { + opp-peak-kBps = <800000>; + }; + opp-1 { + opp-peak-kBps = <1804000>; + }; + opp-2 { + opp-peak-kBps = <2188000>; + }; + opp-3 { + opp-peak-kBps = <3072000>; + }; + opp-4 { + opp-peak-kBps = <4068000>; + }; + opp-5 { + opp-peak-kBps = <6220000>; + }; + opp-6 { + opp-peak-kBps = <6832000>; + }; + opp-7 { + opp-peak-kBps = <8532000>; + }; + }; + }; + + pmu@90b6400 { + compatible = "qcom,sc7280-cpu-bwmon", "qcom,msm8998-bwmon"; + reg = <0 0x090b6400 0 0x600>; + + interrupts = ; + + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &gem_noc SLAVE_LLCC 3>; + operating-points-v2 = <&cpu_bwmon_opp_table>; + + cpu_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-0 { + opp-peak-kBps = <2400000>; + }; + opp-1 { + opp-peak-kBps = <4800000>; + }; + opp-2 { + opp-peak-kBps = <7456000>; + }; + opp-3 { + opp-peak-kBps = <9600000>; + }; + opp-4 { + opp-peak-kBps = <12896000>; + }; + opp-5 { + opp-peak-kBps = <14928000>; + }; + opp-6 { + opp-peak-kBps = <17056000>; + }; + }; + }; + + dc_noc: interconnect@90e0000 { + reg = <0 0x090e0000 0 0x5080>; + compatible = "qcom,sc7280-dc-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + gem_noc: interconnect@9100000 { + reg = <0 0x9100000 0 0xe2200>; + compatible = "qcom,sc7280-gem-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system-cache-controller@9200000 { + compatible = "qcom,sc7280-llcc"; + reg = <0 0x09200000 0 0xd0000>, <0 0x09600000 0 0x50000>; + reg-names = "llcc_base", "llcc_broadcast_base"; + interrupts = ; + }; + + eud: eud@88e0000 { + compatible = "qcom,sc7280-eud","qcom,eud"; + reg = <0 0x88e0000 0 0x2000>, + <0 0x88e2000 0 0x1000>; + interrupts-extended = <&pdc 11 IRQ_TYPE_LEVEL_HIGH>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + eud_ep: endpoint { + remote-endpoint = <&usb2_role_switch>; + }; + }; + port@1 { + reg = <1>; + eud_con: endpoint { + remote-endpoint = <&con_eud>; + }; + }; + }; + }; + + eud_typec: connector { + compatible = "usb-c-connector"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + con_eud: endpoint { + remote-endpoint = <&eud_con>; + }; + }; + }; + }; + + nsp_noc: interconnect@a0c0000 { + reg = <0 0x0a0c0000 0 0x10000>; + compatible = "qcom,sc7280-nsp-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + usb_1: usb@a6f8800 { + compatible = "qcom,sc7280-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + dma-ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 14 IRQ_TYPE_EDGE_BOTH>, + <&pdc 15 IRQ_TYPE_EDGE_BOTH>, + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; + + power-domains = <&gcc GCC_USB30_PRIM_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_USB3_0 0>; + interconnect-names = "usb-ddr", "apps-usb"; + + wakeup-source; + + usb_1_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xe000>; + interrupts = ; + iommus = <&apps_smmu 0xe0 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + maximum-speed = "super-speed"; + }; + }; + + venus: video-codec@aa00000 { + compatible = "qcom,sc7280-venus"; + reg = <0 0x0aa00000 0 0xd0600>; + interrupts = ; + + clocks = <&videocc VIDEO_CC_MVSC_CORE_CLK>, + <&videocc VIDEO_CC_MVSC_CTL_AXI_CLK>, + <&videocc VIDEO_CC_VENUS_AHB_CLK>, + <&videocc VIDEO_CC_MVS0_CORE_CLK>, + <&videocc VIDEO_CC_MVS0_AXI_CLK>; + clock-names = "core", "bus", "iface", + "vcodec_core", "vcodec_bus"; + + power-domains = <&videocc MVSC_GDSC>, + <&videocc MVS0_GDSC>, + <&rpmhpd SC7280_CX>; + power-domain-names = "venus", "vcodec0", "cx"; + operating-points-v2 = <&venus_opp_table>; + + interconnects = <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_VENUS_CFG 0>, + <&mmss_noc MASTER_VIDEO_P0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "cpu-cfg", "video-mem"; + + iommus = <&apps_smmu 0x2180 0x20>, + <&apps_smmu 0x2184 0x20>; + memory-region = <&video_mem>; + + video-decoder { + compatible = "venus-decoder"; + }; + + video-encoder { + compatible = "venus-encoder"; + }; + + video-firmware { + iommus = <&apps_smmu 0x21a2 0x0>; + }; + + venus_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-133330000 { + opp-hz = /bits/ 64 <133330000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-240000000 { + opp-hz = /bits/ 64 <240000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-335000000 { + opp-hz = /bits/ 64 <335000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-424000000 { + opp-hz = /bits/ 64 <424000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + + opp-460000048 { + opp-hz = /bits/ 64 <460000048>; + required-opps = <&rpmhpd_opp_turbo>; + }; + }; + + }; + + videocc: clock-controller@aaf0000 { + compatible = "qcom,sc7280-videocc"; + reg = <0 0xaaf0000 0 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>; + clock-names = "bi_tcxo", "bi_tcxo_ao"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + camcc: clock-controller@ad00000 { + compatible = "qcom,sc7280-camcc"; + reg = <0 0x0ad00000 0 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>; + clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + dispcc: clock-controller@af00000 { + compatible = "qcom,sc7280-dispcc"; + reg = <0 0xaf00000 0 0x20000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_DISP_GPLL0_CLK_SRC>, + <&mdss_dsi_phy 0>, + <&mdss_dsi_phy 1>, + <&dp_phy 0>, + <&dp_phy 1>, + <&mdss_edp_phy 0>, + <&mdss_edp_phy 1>; + clock-names = "bi_tcxo", + "gcc_disp_gpll0_clk", + "dsi0_phy_pll_out_byteclk", + "dsi0_phy_pll_out_dsiclk", + "dp_phy_pll_link_clk", + "dp_phy_pll_vco_div_clk", + "edp_phy_pll_link_clk", + "edp_phy_pll_vco_div_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + mdss: display-subsystem@ae00000 { + compatible = "qcom,sc7280-mdss"; + reg = <0 0x0ae00000 0 0x1000>; + reg-names = "mdss"; + + power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", + "ahb", + "core"; + + interrupts = ; + interrupt-controller; + #interrupt-cells = <1>; + + interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "mdp0-mem"; + + iommus = <&apps_smmu 0x900 0x402>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + mdss_mdp: display-controller@ae01000 { + compatible = "qcom,sc7280-dpu"; + reg = <0 0x0ae01000 0 0x8f030>, + <0 0x0aeb0000 0 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", + "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>; + assigned-clock-rates = <19200000>, + <19200000>; + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd SC7280_CX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf5_out: endpoint { + remote-endpoint = <&edp_in>; + }; + }; + + port@2 { + reg = <2>; + dpu_intf0_out: endpoint { + remote-endpoint = <&dp_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-380000000 { + opp-hz = /bits/ 64 <380000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-506666667 { + opp-hz = /bits/ 64 <506666667>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss_dsi: dsi@ae94000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae94000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SC7280_CX>; + + phys = <&mdss_dsi_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + + dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + mdss_dsi_phy: phy@ae94400 { + compatible = "qcom,sc7280-dsi-phy-7nm"; + reg = <0 0x0ae94400 0 0x200>, + <0 0x0ae94600 0 0x280>, + <0 0x0ae94900 0 0x280>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + + mdss_edp: edp@aea0000 { + compatible = "qcom,sc7280-edp"; + pinctrl-names = "default"; + pinctrl-0 = <&edp_hot_plug_det>; + + reg = <0 0xaea0000 0 0x200>, + <0 0xaea0200 0 0x200>, + <0 0xaea0400 0 0xc00>, + <0 0xaea1000 0 0x400>; + + interrupt-parent = <&mdss>; + interrupts = <14>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_EDP_AUX_CLK>, + <&dispcc DISP_CC_MDSS_EDP_LINK_CLK>, + <&dispcc DISP_CC_MDSS_EDP_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + assigned-clocks = <&dispcc DISP_CC_MDSS_EDP_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK_SRC>; + assigned-clock-parents = <&mdss_edp_phy 0>, <&mdss_edp_phy 1>; + + phys = <&mdss_edp_phy>; + phy-names = "dp"; + + operating-points-v2 = <&edp_opp_table>; + power-domains = <&rpmhpd SC7280_CX>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + edp_in: endpoint { + remote-endpoint = <&dpu_intf5_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_edp_out: endpoint { }; + }; + }; + + edp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss_edp_phy: phy@aec2a00 { + compatible = "qcom,sc7280-edp-phy"; + + reg = <0 0xaec2a00 0 0x19c>, + <0 0xaec2200 0 0xa0>, + <0 0xaec2600 0 0xa0>, + <0 0xaec2000 0 0x1c0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_EDP_CLKREF_EN>; + clock-names = "aux", + "cfg_ahb"; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + mdss_dp: displayport-controller@ae90000 { + compatible = "qcom,sc7280-dp"; + + reg = <0 0xae90000 0 0x200>, + <0 0xae90200 0 0x200>, + <0 0xae90400 0 0xc00>, + <0 0xae91000 0 0x400>, + <0 0xae91400 0 0x400>; + + interrupt-parent = <&mdss>; + interrupts = <12>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DP_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>; + assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>; + phys = <&dp_phy>; + phy-names = "dp"; + + operating-points-v2 = <&dp_opp_table>; + power-domains = <&rpmhpd SC7280_CX>; + + #sound-dai-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dp_in: endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + dp_out: endpoint { }; + }; + }; + + dp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,sc7280-pdc", "qcom,pdc"; + reg = <0 0x0b220000 0 0x30000>; + qcom,pdc-ranges = <0 480 40>, <40 140 14>, <54 263 1>, + <55 306 4>, <59 312 3>, <62 374 2>, + <64 434 2>, <66 438 3>, <69 86 1>, + <70 520 54>, <124 609 31>, <155 63 1>, + <156 716 12>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + pdc_reset: reset-controller@b5e0000 { + compatible = "qcom,sc7280-pdc-global"; + reg = <0 0x0b5e0000 0 0x20000>; + #reset-cells = <1>; + status = "reserved"; /* Owned by firmware */ + }; + + tsens0: thermal-sensor@c263000 { + compatible = "qcom,sc7280-tsens","qcom,tsens-v2"; + reg = <0 0x0c263000 0 0x1ff>, /* TM */ + <0 0x0c222000 0 0x1ff>; /* SROT */ + #qcom,sensors = <15>; + interrupts = , + ; + interrupt-names = "uplow","critical"; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c265000 { + compatible = "qcom,sc7280-tsens","qcom,tsens-v2"; + reg = <0 0x0c265000 0 0x1ff>, /* TM */ + <0 0x0c223000 0 0x1ff>; /* SROT */ + #qcom,sensors = <12>; + interrupts = , + ; + interrupt-names = "uplow","critical"; + #thermal-sensor-cells = <1>; + }; + + aoss_reset: reset-controller@c2a0000 { + compatible = "qcom,sc7280-aoss-cc", "qcom,sdm845-aoss-cc"; + reg = <0 0x0c2a0000 0 0x31000>; + #reset-cells = <1>; + }; + + aoss_qmp: power-controller@c300000 { + compatible = "qcom,sc7280-aoss-qmp", "qcom,aoss-qmp"; + reg = <0 0x0c300000 0 0x400>; + interrupts-extended = <&ipcc IPCC_CLIENT_AOP + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_AOP + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + #clock-cells = <0>; + }; + + sram@c3f0000 { + compatible = "qcom,rpmh-stats"; + reg = <0 0x0c3f0000 0 0x400>; + }; + + spmi_bus: spmi@c440000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0 0x0c440000 0 0x1100>, + <0 0x0c600000 0 0x2000000>, + <0 0x0e600000 0 0x100000>, + <0 0x0e700000 0 0xa0000>, + <0 0x0c40a000 0 0x26000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + tlmm: pinctrl@f100000 { + compatible = "qcom,sc7280-pinctrl"; + reg = <0 0x0f100000 0 0x300000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 175>; + wakeup-parent = <&pdc>; + + dp_hot_plug_det: dp-hot-plug-det-pins { + pins = "gpio47"; + function = "dp_hot"; + }; + + edp_hot_plug_det: edp-hot-plug-det-pins { + pins = "gpio60"; + function = "edp_hot"; + }; + + mi2s0_data0: mi2s0-data0-pins { + pins = "gpio98"; + function = "mi2s0_data0"; + }; + + mi2s0_data1: mi2s0-data1-pins { + pins = "gpio99"; + function = "mi2s0_data1"; + }; + + mi2s0_mclk: mi2s0-mclk-pins { + pins = "gpio96"; + function = "pri_mi2s"; + }; + + mi2s0_sclk: mi2s0-sclk-pins { + pins = "gpio97"; + function = "mi2s0_sck"; + }; + + mi2s0_ws: mi2s0-ws-pins { + pins = "gpio100"; + function = "mi2s0_ws"; + }; + + mi2s1_data0: mi2s1-data0-pins { + pins = "gpio107"; + function = "mi2s1_data0"; + }; + + mi2s1_sclk: mi2s1-sclk-pins { + pins = "gpio106"; + function = "mi2s1_sck"; + }; + + mi2s1_ws: mi2s1-ws-pins { + pins = "gpio108"; + function = "mi2s1_ws"; + }; + + pcie1_clkreq_n: pcie1-clkreq-n-pins { + pins = "gpio79"; + function = "pcie1_clkreqn"; + }; + + qspi_clk: qspi-clk-pins { + pins = "gpio14"; + function = "qspi_clk"; + }; + + qspi_cs0: qspi-cs0-pins { + pins = "gpio15"; + function = "qspi_cs"; + }; + + qspi_cs1: qspi-cs1-pins { + pins = "gpio19"; + function = "qspi_cs"; + }; + + qspi_data01: qspi-data01-pins { + pins = "gpio12", "gpio13"; + function = "qspi_data"; + }; + + qspi_data23: qspi-data23-pins { + pins = "gpio16", "gpio17"; + function = "qspi_data"; + }; + + qup_i2c0_data_clk: qup-i2c0-data-clk-pins { + pins = "gpio0", "gpio1"; + function = "qup00"; + }; + + qup_i2c1_data_clk: qup-i2c1-data-clk-pins { + pins = "gpio4", "gpio5"; + function = "qup01"; + }; + + qup_i2c2_data_clk: qup-i2c2-data-clk-pins { + pins = "gpio8", "gpio9"; + function = "qup02"; + }; + + qup_i2c3_data_clk: qup-i2c3-data-clk-pins { + pins = "gpio12", "gpio13"; + function = "qup03"; + }; + + qup_i2c4_data_clk: qup-i2c4-data-clk-pins { + pins = "gpio16", "gpio17"; + function = "qup04"; + }; + + qup_i2c5_data_clk: qup-i2c5-data-clk-pins { + pins = "gpio20", "gpio21"; + function = "qup05"; + }; + + qup_i2c6_data_clk: qup-i2c6-data-clk-pins { + pins = "gpio24", "gpio25"; + function = "qup06"; + }; + + qup_i2c7_data_clk: qup-i2c7-data-clk-pins { + pins = "gpio28", "gpio29"; + function = "qup07"; + }; + + qup_i2c8_data_clk: qup-i2c8-data-clk-pins { + pins = "gpio32", "gpio33"; + function = "qup10"; + }; + + qup_i2c9_data_clk: qup-i2c9-data-clk-pins { + pins = "gpio36", "gpio37"; + function = "qup11"; + }; + + qup_i2c10_data_clk: qup-i2c10-data-clk-pins { + pins = "gpio40", "gpio41"; + function = "qup12"; + }; + + qup_i2c11_data_clk: qup-i2c11-data-clk-pins { + pins = "gpio44", "gpio45"; + function = "qup13"; + }; + + qup_i2c12_data_clk: qup-i2c12-data-clk-pins { + pins = "gpio48", "gpio49"; + function = "qup14"; + }; + + qup_i2c13_data_clk: qup-i2c13-data-clk-pins { + pins = "gpio52", "gpio53"; + function = "qup15"; + }; + + qup_i2c14_data_clk: qup-i2c14-data-clk-pins { + pins = "gpio56", "gpio57"; + function = "qup16"; + }; + + qup_i2c15_data_clk: qup-i2c15-data-clk-pins { + pins = "gpio60", "gpio61"; + function = "qup17"; + }; + + qup_spi0_data_clk: qup-spi0-data-clk-pins { + pins = "gpio0", "gpio1", "gpio2"; + function = "qup00"; + }; + + qup_spi0_cs: qup-spi0-cs-pins { + pins = "gpio3"; + function = "qup00"; + }; + + qup_spi0_cs_gpio: qup-spi0-cs-gpio-pins { + pins = "gpio3"; + function = "gpio"; + }; + + qup_spi1_data_clk: qup-spi1-data-clk-pins { + pins = "gpio4", "gpio5", "gpio6"; + function = "qup01"; + }; + + qup_spi1_cs: qup-spi1-cs-pins { + pins = "gpio7"; + function = "qup01"; + }; + + qup_spi1_cs_gpio: qup-spi1-cs-gpio-pins { + pins = "gpio7"; + function = "gpio"; + }; + + qup_spi2_data_clk: qup-spi2-data-clk-pins { + pins = "gpio8", "gpio9", "gpio10"; + function = "qup02"; + }; + + qup_spi2_cs: qup-spi2-cs-pins { + pins = "gpio11"; + function = "qup02"; + }; + + qup_spi2_cs_gpio: qup-spi2-cs-gpio-pins { + pins = "gpio11"; + function = "gpio"; + }; + + qup_spi3_data_clk: qup-spi3-data-clk-pins { + pins = "gpio12", "gpio13", "gpio14"; + function = "qup03"; + }; + + qup_spi3_cs: qup-spi3-cs-pins { + pins = "gpio15"; + function = "qup03"; + }; + + qup_spi3_cs_gpio: qup-spi3-cs-gpio-pins { + pins = "gpio15"; + function = "gpio"; + }; + + qup_spi4_data_clk: qup-spi4-data-clk-pins { + pins = "gpio16", "gpio17", "gpio18"; + function = "qup04"; + }; + + qup_spi4_cs: qup-spi4-cs-pins { + pins = "gpio19"; + function = "qup04"; + }; + + qup_spi4_cs_gpio: qup-spi4-cs-gpio-pins { + pins = "gpio19"; + function = "gpio"; + }; + + qup_spi5_data_clk: qup-spi5-data-clk-pins { + pins = "gpio20", "gpio21", "gpio22"; + function = "qup05"; + }; + + qup_spi5_cs: qup-spi5-cs-pins { + pins = "gpio23"; + function = "qup05"; + }; + + qup_spi5_cs_gpio: qup-spi5-cs-gpio-pins { + pins = "gpio23"; + function = "gpio"; + }; + + qup_spi6_data_clk: qup-spi6-data-clk-pins { + pins = "gpio24", "gpio25", "gpio26"; + function = "qup06"; + }; + + qup_spi6_cs: qup-spi6-cs-pins { + pins = "gpio27"; + function = "qup06"; + }; + + qup_spi6_cs_gpio: qup-spi6-cs-gpio-pins { + pins = "gpio27"; + function = "gpio"; + }; + + qup_spi7_data_clk: qup-spi7-data-clk-pins { + pins = "gpio28", "gpio29", "gpio30"; + function = "qup07"; + }; + + qup_spi7_cs: qup-spi7-cs-pins { + pins = "gpio31"; + function = "qup07"; + }; + + qup_spi7_cs_gpio: qup-spi7-cs-gpio-pins { + pins = "gpio31"; + function = "gpio"; + }; + + qup_spi8_data_clk: qup-spi8-data-clk-pins { + pins = "gpio32", "gpio33", "gpio34"; + function = "qup10"; + }; + + qup_spi8_cs: qup-spi8-cs-pins { + pins = "gpio35"; + function = "qup10"; + }; + + qup_spi8_cs_gpio: qup-spi8-cs-gpio-pins { + pins = "gpio35"; + function = "gpio"; + }; + + qup_spi9_data_clk: qup-spi9-data-clk-pins { + pins = "gpio36", "gpio37", "gpio38"; + function = "qup11"; + }; + + qup_spi9_cs: qup-spi9-cs-pins { + pins = "gpio39"; + function = "qup11"; + }; + + qup_spi9_cs_gpio: qup-spi9-cs-gpio-pins { + pins = "gpio39"; + function = "gpio"; + }; + + qup_spi10_data_clk: qup-spi10-data-clk-pins { + pins = "gpio40", "gpio41", "gpio42"; + function = "qup12"; + }; + + qup_spi10_cs: qup-spi10-cs-pins { + pins = "gpio43"; + function = "qup12"; + }; + + qup_spi10_cs_gpio: qup-spi10-cs-gpio-pins { + pins = "gpio43"; + function = "gpio"; + }; + + qup_spi11_data_clk: qup-spi11-data-clk-pins { + pins = "gpio44", "gpio45", "gpio46"; + function = "qup13"; + }; + + qup_spi11_cs: qup-spi11-cs-pins { + pins = "gpio47"; + function = "qup13"; + }; + + qup_spi11_cs_gpio: qup-spi11-cs-gpio-pins { + pins = "gpio47"; + function = "gpio"; + }; + + qup_spi12_data_clk: qup-spi12-data-clk-pins { + pins = "gpio48", "gpio49", "gpio50"; + function = "qup14"; + }; + + qup_spi12_cs: qup-spi12-cs-pins { + pins = "gpio51"; + function = "qup14"; + }; + + qup_spi12_cs_gpio: qup-spi12-cs-gpio-pins { + pins = "gpio51"; + function = "gpio"; + }; + + qup_spi13_data_clk: qup-spi13-data-clk-pins { + pins = "gpio52", "gpio53", "gpio54"; + function = "qup15"; + }; + + qup_spi13_cs: qup-spi13-cs-pins { + pins = "gpio55"; + function = "qup15"; + }; + + qup_spi13_cs_gpio: qup-spi13-cs-gpio-pins { + pins = "gpio55"; + function = "gpio"; + }; + + qup_spi14_data_clk: qup-spi14-data-clk-pins { + pins = "gpio56", "gpio57", "gpio58"; + function = "qup16"; + }; + + qup_spi14_cs: qup-spi14-cs-pins { + pins = "gpio59"; + function = "qup16"; + }; + + qup_spi14_cs_gpio: qup-spi14-cs-gpio-pins { + pins = "gpio59"; + function = "gpio"; + }; + + qup_spi15_data_clk: qup-spi15-data-clk-pins { + pins = "gpio60", "gpio61", "gpio62"; + function = "qup17"; + }; + + qup_spi15_cs: qup-spi15-cs-pins { + pins = "gpio63"; + function = "qup17"; + }; + + qup_spi15_cs_gpio: qup-spi15-cs-gpio-pins { + pins = "gpio63"; + function = "gpio"; + }; + + qup_uart0_cts: qup-uart0-cts-pins { + pins = "gpio0"; + function = "qup00"; + }; + + qup_uart0_rts: qup-uart0-rts-pins { + pins = "gpio1"; + function = "qup00"; + }; + + qup_uart0_tx: qup-uart0-tx-pins { + pins = "gpio2"; + function = "qup00"; + }; + + qup_uart0_rx: qup-uart0-rx-pins { + pins = "gpio3"; + function = "qup00"; + }; + + qup_uart1_cts: qup-uart1-cts-pins { + pins = "gpio4"; + function = "qup01"; + }; + + qup_uart1_rts: qup-uart1-rts-pins { + pins = "gpio5"; + function = "qup01"; + }; + + qup_uart1_tx: qup-uart1-tx-pins { + pins = "gpio6"; + function = "qup01"; + }; + + qup_uart1_rx: qup-uart1-rx-pins { + pins = "gpio7"; + function = "qup01"; + }; + + qup_uart2_cts: qup-uart2-cts-pins { + pins = "gpio8"; + function = "qup02"; + }; + + qup_uart2_rts: qup-uart2-rts-pins { + pins = "gpio9"; + function = "qup02"; + }; + + qup_uart2_tx: qup-uart2-tx-pins { + pins = "gpio10"; + function = "qup02"; + }; + + qup_uart2_rx: qup-uart2-rx-pins { + pins = "gpio11"; + function = "qup02"; + }; + + qup_uart3_cts: qup-uart3-cts-pins { + pins = "gpio12"; + function = "qup03"; + }; + + qup_uart3_rts: qup-uart3-rts-pins { + pins = "gpio13"; + function = "qup03"; + }; + + qup_uart3_tx: qup-uart3-tx-pins { + pins = "gpio14"; + function = "qup03"; + }; + + qup_uart3_rx: qup-uart3-rx-pins { + pins = "gpio15"; + function = "qup03"; + }; + + qup_uart4_cts: qup-uart4-cts-pins { + pins = "gpio16"; + function = "qup04"; + }; + + qup_uart4_rts: qup-uart4-rts-pins { + pins = "gpio17"; + function = "qup04"; + }; + + qup_uart4_tx: qup-uart4-tx-pins { + pins = "gpio18"; + function = "qup04"; + }; + + qup_uart4_rx: qup-uart4-rx-pins { + pins = "gpio19"; + function = "qup04"; + }; + + qup_uart5_cts: qup-uart5-cts-pins { + pins = "gpio20"; + function = "qup05"; + }; + + qup_uart5_rts: qup-uart5-rts-pins { + pins = "gpio21"; + function = "qup05"; + }; + + qup_uart5_tx: qup-uart5-tx-pins { + pins = "gpio22"; + function = "qup05"; + }; + + qup_uart5_rx: qup-uart5-rx-pins { + pins = "gpio23"; + function = "qup05"; + }; + + qup_uart6_cts: qup-uart6-cts-pins { + pins = "gpio24"; + function = "qup06"; + }; + + qup_uart6_rts: qup-uart6-rts-pins { + pins = "gpio25"; + function = "qup06"; + }; + + qup_uart6_tx: qup-uart6-tx-pins { + pins = "gpio26"; + function = "qup06"; + }; + + qup_uart6_rx: qup-uart6-rx-pins { + pins = "gpio27"; + function = "qup06"; + }; + + qup_uart7_cts: qup-uart7-cts-pins { + pins = "gpio28"; + function = "qup07"; + }; + + qup_uart7_rts: qup-uart7-rts-pins { + pins = "gpio29"; + function = "qup07"; + }; + + qup_uart7_tx: qup-uart7-tx-pins { + pins = "gpio30"; + function = "qup07"; + }; + + qup_uart7_rx: qup-uart7-rx-pins { + pins = "gpio31"; + function = "qup07"; + }; + + qup_uart8_cts: qup-uart8-cts-pins { + pins = "gpio32"; + function = "qup10"; + }; + + qup_uart8_rts: qup-uart8-rts-pins { + pins = "gpio33"; + function = "qup10"; + }; + + qup_uart8_tx: qup-uart8-tx-pins { + pins = "gpio34"; + function = "qup10"; + }; + + qup_uart8_rx: qup-uart8-rx-pins { + pins = "gpio35"; + function = "qup10"; + }; + + qup_uart9_cts: qup-uart9-cts-pins { + pins = "gpio36"; + function = "qup11"; + }; + + qup_uart9_rts: qup-uart9-rts-pins { + pins = "gpio37"; + function = "qup11"; + }; + + qup_uart9_tx: qup-uart9-tx-pins { + pins = "gpio38"; + function = "qup11"; + }; + + qup_uart9_rx: qup-uart9-rx-pins { + pins = "gpio39"; + function = "qup11"; + }; + + qup_uart10_cts: qup-uart10-cts-pins { + pins = "gpio40"; + function = "qup12"; + }; + + qup_uart10_rts: qup-uart10-rts-pins { + pins = "gpio41"; + function = "qup12"; + }; + + qup_uart10_tx: qup-uart10-tx-pins { + pins = "gpio42"; + function = "qup12"; + }; + + qup_uart10_rx: qup-uart10-rx-pins { + pins = "gpio43"; + function = "qup12"; + }; + + qup_uart11_cts: qup-uart11-cts-pins { + pins = "gpio44"; + function = "qup13"; + }; + + qup_uart11_rts: qup-uart11-rts-pins { + pins = "gpio45"; + function = "qup13"; + }; + + qup_uart11_tx: qup-uart11-tx-pins { + pins = "gpio46"; + function = "qup13"; + }; + + qup_uart11_rx: qup-uart11-rx-pins { + pins = "gpio47"; + function = "qup13"; + }; + + qup_uart12_cts: qup-uart12-cts-pins { + pins = "gpio48"; + function = "qup14"; + }; + + qup_uart12_rts: qup-uart12-rts-pins { + pins = "gpio49"; + function = "qup14"; + }; + + qup_uart12_tx: qup-uart12-tx-pins { + pins = "gpio50"; + function = "qup14"; + }; + + qup_uart12_rx: qup-uart12-rx-pins { + pins = "gpio51"; + function = "qup14"; + }; + + qup_uart13_cts: qup-uart13-cts-pins { + pins = "gpio52"; + function = "qup15"; + }; + + qup_uart13_rts: qup-uart13-rts-pins { + pins = "gpio53"; + function = "qup15"; + }; + + qup_uart13_tx: qup-uart13-tx-pins { + pins = "gpio54"; + function = "qup15"; + }; + + qup_uart13_rx: qup-uart13-rx-pins { + pins = "gpio55"; + function = "qup15"; + }; + + qup_uart14_cts: qup-uart14-cts-pins { + pins = "gpio56"; + function = "qup16"; + }; + + qup_uart14_rts: qup-uart14-rts-pins { + pins = "gpio57"; + function = "qup16"; + }; + + qup_uart14_tx: qup-uart14-tx-pins { + pins = "gpio58"; + function = "qup16"; + }; + + qup_uart14_rx: qup-uart14-rx-pins { + pins = "gpio59"; + function = "qup16"; + }; + + qup_uart15_cts: qup-uart15-cts-pins { + pins = "gpio60"; + function = "qup17"; + }; + + qup_uart15_rts: qup-uart15-rts-pins { + pins = "gpio61"; + function = "qup17"; + }; + + qup_uart15_tx: qup-uart15-tx-pins { + pins = "gpio62"; + function = "qup17"; + }; + + qup_uart15_rx: qup-uart15-rx-pins { + pins = "gpio63"; + function = "qup17"; + }; + + sdc1_clk: sdc1-clk-pins { + pins = "sdc1_clk"; + }; + + sdc1_cmd: sdc1-cmd-pins { + pins = "sdc1_cmd"; + }; + + sdc1_data: sdc1-data-pins { + pins = "sdc1_data"; + }; + + sdc1_rclk: sdc1-rclk-pins { + pins = "sdc1_rclk"; + }; + + sdc1_clk_sleep: sdc1-clk-sleep-pins { + pins = "sdc1_clk"; + drive-strength = <2>; + bias-bus-hold; + }; + + sdc1_cmd_sleep: sdc1-cmd-sleep-pins { + pins = "sdc1_cmd"; + drive-strength = <2>; + bias-bus-hold; + }; + + sdc1_data_sleep: sdc1-data-sleep-pins { + pins = "sdc1_data"; + drive-strength = <2>; + bias-bus-hold; + }; + + sdc1_rclk_sleep: sdc1-rclk-sleep-pins { + pins = "sdc1_rclk"; + drive-strength = <2>; + bias-bus-hold; + }; + + sdc2_clk: sdc2-clk-pins { + pins = "sdc2_clk"; + }; + + sdc2_cmd: sdc2-cmd-pins { + pins = "sdc2_cmd"; + }; + + sdc2_data: sdc2-data-pins { + pins = "sdc2_data"; + }; + + sdc2_clk_sleep: sdc2-clk-sleep-pins { + pins = "sdc2_clk"; + drive-strength = <2>; + bias-bus-hold; + }; + + sdc2_cmd_sleep: sdc2-cmd-sleep-pins { + pins = "sdc2_cmd"; + drive-strength = <2>; + bias-bus-hold; + }; + + sdc2_data_sleep: sdc2-data-sleep-pins { + pins = "sdc2_data"; + drive-strength = <2>; + bias-bus-hold; + }; + }; + + sram@146a5000 { + compatible = "qcom,sc7280-imem", "syscon", "simple-mfd"; + reg = <0 0x146a5000 0 0x6000>; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0 0 0x146a5000 0x6000>; + + pil-reloc@594c { + compatible = "qcom,pil-reloc-info"; + reg = <0x594c 0xc8>; + }; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,sc7280-smmu-500", "arm,mmu-500"; + reg = <0 0x15000000 0 0x100000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + dma-coherent; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + }; + + intc: interrupt-controller@17a00000 { + compatible = "arm,gic-v3"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0 0x17a00000 0 0x10000>, /* GICD */ + <0 0x17a60000 0 0x100000>; /* GICR * 8 */ + interrupts = ; + + gic-its@17a40000 { + compatible = "arm,gic-v3-its"; + msi-controller; + #msi-cells = <1>; + reg = <0 0x17a40000 0 0x20000>; + status = "disabled"; + }; + }; + + watchdog: watchdog@17c10000 { + compatible = "qcom,apss-wdt-sc7280", "qcom,kpss-wdt"; + reg = <0 0x17c10000 0 0x1000>; + clocks = <&sleep_clk>; + interrupts = ; + status = "reserved"; /* Owned by Gunyah hyp */ + }; + + timer@17c20000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0x20000000>; + compatible = "arm,armv7-timer-mem"; + reg = <0 0x17c20000 0 0x1000>; + + frame@17c21000 { + frame-number = <0>; + interrupts = , + ; + reg = <0x17c21000 0x1000>, + <0x17c22000 0x1000>; + }; + + frame@17c23000 { + frame-number = <1>; + interrupts = ; + reg = <0x17c23000 0x1000>; + status = "disabled"; + }; + + frame@17c25000 { + frame-number = <2>; + interrupts = ; + reg = <0x17c25000 0x1000>; + status = "disabled"; + }; + + frame@17c27000 { + frame-number = <3>; + interrupts = ; + reg = <0x17c27000 0x1000>; + status = "disabled"; + }; + + frame@17c29000 { + frame-number = <4>; + interrupts = ; + reg = <0x17c29000 0x1000>; + status = "disabled"; + }; + + frame@17c2b000 { + frame-number = <5>; + interrupts = ; + reg = <0x17c2b000 0x1000>; + status = "disabled"; + }; + + frame@17c2d000 { + frame-number = <6>; + interrupts = ; + reg = <0x17c2d000 0x1000>; + status = "disabled"; + }; + }; + + apps_rsc: rsc@18200000 { + compatible = "qcom,rpmh-rsc"; + reg = <0 0x18200000 0 0x10000>, + <0 0x18210000 0 0x10000>, + <0 0x18220000 0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = , + , + ; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = , + , + , + ; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + + rpmhpd: power-controller { + compatible = "qcom,sc7280-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = ; + }; + + rpmhpd_opp_low_svs: opp2 { + opp-level = ; + }; + + rpmhpd_opp_svs: opp3 { + opp-level = ; + }; + + rpmhpd_opp_svs_l1: opp4 { + opp-level = ; + }; + + rpmhpd_opp_svs_l2: opp5 { + opp-level = ; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = ; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = ; + }; + + rpmhpd_opp_turbo: opp8 { + opp-level = ; + }; + + rpmhpd_opp_turbo_l1: opp9 { + opp-level = ; + }; + }; + }; + + rpmhcc: clock-controller { + compatible = "qcom,sc7280-rpmh-clk"; + clocks = <&xo_board>; + clock-names = "xo"; + #clock-cells = <1>; + }; + }; + + epss_l3: interconnect@18590000 { + compatible = "qcom,sc7280-epss-l3"; + reg = <0 0x18590000 0 0x1000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; + clock-names = "xo", "alternate"; + #interconnect-cells = <1>; + }; + + cpufreq_hw: cpufreq@18591000 { + compatible = "qcom,cpufreq-epss"; + reg = <0 0x18591000 0 0x1000>, + <0 0x18592000 0 0x1000>, + <0 0x18593000 0 0x1000>; + + interrupts = , + , + ; + interrupt-names = "dcvsh-irq-0", + "dcvsh-irq-1", + "dcvsh-irq-2"; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; + clock-names = "xo", "alternate"; + #freq-domain-cells = <1>; + }; + }; + + thermal_zones: thermal-zones { + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 1>; + + trips { + cpu0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_crit: cpu-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu0_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu0_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 2>; + + trips { + cpu1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_crit: cpu-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu1_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu1_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 3>; + + trips { + cpu2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_crit: cpu-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu2_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu2_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 4>; + + trips { + cpu3_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_crit: cpu-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu3_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu3_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu4-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 7>; + + trips { + cpu4_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_crit: cpu-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu4_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu4_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu5-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 8>; + + trips { + cpu5_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_crit: cpu-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu5_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu5_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu6-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 9>; + + trips { + cpu6_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_crit: cpu-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu6_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu6_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu7-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 10>; + + trips { + cpu7_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_crit: cpu-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu7_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu7_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu8-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 11>; + + trips { + cpu8_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu8_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu8_crit: cpu-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu8_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu8_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu9-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 12>; + + trips { + cpu9_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu9_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu9_crit: cpu-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu9_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu9_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu10-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 13>; + + trips { + cpu10_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu10_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu10_crit: cpu-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu10_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu10_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu11-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 14>; + + trips { + cpu11_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu11_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu11_crit: cpu-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu11_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu11_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + aoss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 0>; + + trips { + aoss0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + aoss0_crit: aoss0-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + aoss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 0>; + + trips { + aoss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + aoss1_crit: aoss1-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpuss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 5>; + + trips { + cpuss0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + cpuss0_crit: cluster0-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpuss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 6>; + + trips { + cpuss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + cpuss1_crit: cluster0-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpuss0-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 1>; + + trips { + gpuss0_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpuss0_crit: gpuss0-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&gpuss0_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + gpuss1-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 2>; + + trips { + gpuss1_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpuss1_crit: gpuss1-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&gpuss1_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + nspss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 3>; + + trips { + nspss0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + nspss0_crit: nspss0-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + nspss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 4>; + + trips { + nspss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + nspss1_crit: nspss1-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 5>; + + trips { + video_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + video_crit: video-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + ddr-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 6>; + + trips { + ddr_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + ddr_crit: ddr-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + mdmss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 7>; + + trips { + mdmss0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + mdmss0_crit: mdmss0-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + mdmss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 8>; + + trips { + mdmss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + mdmss1_crit: mdmss1-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + mdmss2-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 9>; + + trips { + mdmss2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + mdmss2_crit: mdmss2-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + mdmss3-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 10>; + + trips { + mdmss3_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + mdmss3_crit: mdmss3-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + camera0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 11>; + + trips { + camera0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + camera0_crit: camera0-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts new file mode 100644 index 000000000..38ec8acb7 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts @@ -0,0 +1,440 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + * Copyright (c) 2022, Linaro Limited + */ + +/dts-v1/; + +#include +#include + +#include "sc8280xp.dtsi" +#include "sc8280xp-pmics.dtsi" + +/ { + model = "Qualcomm SC8280XP CRD"; + compatible = "qcom,sc8280xp-crd", "qcom,sc8280xp"; + + aliases { + serial0 = &qup2_uart17; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pmc8280c_lpg 3 1000000>; + enable-gpios = <&pmc8280_1_gpios 8 GPIO_ACTIVE_HIGH>; + power-supply = <&vreg_edp_bl>; + + pinctrl-names = "default"; + pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vreg_edp_bl: regulator-edp-bl { + compatible = "regulator-fixed"; + + regulator-name = "VREG_EDP_BL"; + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + gpio = <&pmc8280_1_gpios 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&edp_bl_reg_en>; + + regulator-boot-on; + }; + + vreg_misc_3p3: regulator-misc-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_MISC_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pmc8280_1_gpios 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&misc_3p3_reg_en>; + + regulator-boot-on; + regulator-always-on; + }; +}; + +&apps_rsc { + pmc8280-1-rpmh-regulators { + compatible = "qcom,pm8350-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-l3-l5-supply = <&vreg_s11b>; + + vreg_s11b: smps11 { + regulator-name = "vreg_s11b"; + regulator-min-microvolt = <1272000>; + regulator-max-microvolt = <1272000>; + regulator-initial-mode = ; + }; + + vreg_l3b: ldo3 { + regulator-name = "vreg_l3b"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + regulator-boot-on; + regulator-always-on; + }; + + vreg_l4b: ldo4 { + regulator-name = "vreg_l4b"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + }; + + vreg_l6b: ldo6 { + regulator-name = "vreg_l6b"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + regulator-boot-on; + }; + }; + + pmc8280c-rpmh-regulators { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_l1c: ldo1 { + regulator-name = "vreg_l1c"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l7c: ldo7 { + regulator-name = "vreg_l7c"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = + ; + }; + + vreg_l13c: ldo13 { + regulator-name = "vreg_l13c"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + }; + }; + + pmc8280-2-rpmh-regulators { + compatible = "qcom,pm8350-rpmh-regulators"; + qcom,pmic-id = "d"; + + vdd-l1-l4-supply = <&vreg_s11b>; + + vreg_l3d: ldo3 { + regulator-name = "vreg_l3d"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = + ; + }; + + vreg_l4d: ldo4 { + regulator-name = "vreg_l4d"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l6d: ldo6 { + regulator-name = "vreg_l6d"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + }; + + vreg_l7d: ldo7 { + regulator-name = "vreg_l7d"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + }; + + vreg_l9d: ldo9 { + regulator-name = "vreg_l9d"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + }; + }; +}; + +&pmc8280c_lpg { + status = "okay"; +}; + +&pmk8280_pon_pwrkey { + status = "okay"; +}; + +&qup0 { + status = "okay"; +}; + +&qup0_i2c4 { + clock-frequency = <400000>; + + pinctrl-names = "default"; + pinctrl-0 = <&qup0_i2c4_default>; + + status = "okay"; + + touchscreen@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts0_default>; + }; +}; + +&qup1 { + status = "okay"; +}; + +&qup2 { + status = "okay"; +}; + +&qup2_i2c5 { + clock-frequency = <400000>; + + pinctrl-names = "default"; + pinctrl-0 = <&qup2_i2c5_default>; + + status = "okay"; + + touchpad@15 { + compatible = "hid-over-i2c"; + reg = <0x15>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + + pinctrl-names = "default"; + pinctrl-0 = <&tpad_default>; + + wakeup-source; + }; + + keyboard@68 { + compatible = "hid-over-i2c"; + reg = <0x68>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + + pinctrl-names = "default"; + pinctrl-0 = <&kybd_default>; + + wakeup-source; + }; +}; + +&qup2_uart17 { + compatible = "qcom,geni-debug-uart"; + + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/sc8280xp/qcadsp8280.mbn"; + + status = "okay"; +}; + +&remoteproc_nsp0 { + firmware-name = "qcom/sc8280xp/qccdsp8280.mbn"; + + status = "okay"; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l7c>; + vcc-max-microamp = <800000>; + vccq-supply = <&vreg_l3d>; + vccq-max-microamp = <900000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l6b>; + vdda-pll-supply = <&vreg_l3b>; + + status = "okay"; +}; + +&usb_0 { + status = "okay"; +}; + +&usb_0_dwc3 { + /* TODO: Define USB-C connector properly */ + dr_mode = "host"; +}; + +&usb_0_hsphy { + vdda-pll-supply = <&vreg_l9d>; + vdda18-supply = <&vreg_l1c>; + vdda33-supply = <&vreg_l7d>; + + status = "okay"; +}; + +&usb_0_qmpphy { + vdda-phy-supply = <&vreg_l9d>; + vdda-pll-supply = <&vreg_l4d>; + + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + /* TODO: Define USB-C connector properly */ + dr_mode = "host"; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&vreg_l4b>; + vdda18-supply = <&vreg_l1c>; + vdda33-supply = <&vreg_l13c>; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vreg_l4b>; + vdda-pll-supply = <&vreg_l3b>; + + status = "okay"; +}; + +&xo_board_clk { + clock-frequency = <38400000>; +}; + +/* PINCTRL - additions to nodes defined in sc8280xp.dtsi */ + +&pmc8280_1_gpios { + edp_bl_en: edp-bl-en-state { + pins = "gpio8"; + function = "normal"; + }; + + edp_bl_reg_en: edp-bl-reg-en-state { + pins = "gpio9"; + function = "normal"; + }; + + misc_3p3_reg_en: misc-3p3-reg-en-state { + pins = "gpio2"; + function = "normal"; + }; +}; + +&pmc8280c_gpios { + edp_bl_pwm: edp-bl-pwm-state { + pins = "gpio8"; + function = "func1"; + }; +}; + +&tlmm { + gpio-reserved-ranges = <74 6>, <83 4>, <125 2>, <128 2>, <154 7>; + + kybd_default: kybd-default-state { + disable { + pins = "gpio102"; + function = "gpio"; + output-low; + }; + + int-n { + pins = "gpio104"; + function = "gpio"; + bias-disable; + }; + + reset { + pins = "gpio105"; + function = "gpio"; + bias-disable; + }; + }; + + qup0_i2c4_default: qup0-i2c4-default-state { + pins = "gpio171", "gpio172"; + function = "qup4"; + + bias-disable; + drive-strength = <16>; + }; + + qup2_i2c5_default: qup2-i2c5-default-state { + pins = "gpio81", "gpio82"; + function = "qup21"; + + bias-disable; + drive-strength = <16>; + }; + + tpad_default: tpad-default-state { + int-n { + pins = "gpio182"; + function = "gpio"; + bias-disable; + }; + }; + + ts0_default: ts0-default-state { + int-n { + pins = "gpio175"; + function = "gpio"; + bias-disable; + }; + + reset-n { + pins = "gpio99"; + function = "gpio"; + output-high; + drive-strength = <16>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts new file mode 100644 index 000000000..49d15432a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts @@ -0,0 +1,408 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + * Copyright (c) 2022, Linaro Limited + */ + +/dts-v1/; + +#include +#include + +#include "sc8280xp.dtsi" +#include "sc8280xp-pmics.dtsi" + +/ { + model = "Lenovo ThinkPad X13s"; + compatible = "lenovo,thinkpad-x13s", "qcom,sc8280xp"; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pmc8280c_lpg 3 1000000>; + enable-gpios = <&pmc8280_1_gpios 8 GPIO_ACTIVE_HIGH>; + power-supply = <&vreg_edp_bl>; + + pinctrl-names = "default"; + pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>; + }; + + vreg_edp_bl: regulator-edp-bl { + compatible = "regulator-fixed"; + + regulator-name = "VBL9"; + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + gpio = <&pmc8280_1_gpios 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&edp_bl_reg_en>; + + regulator-boot-on; + }; + + vreg_misc_3p3: regulator-misc-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VCC3B"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pmc8280_1_gpios 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&misc_3p3_reg_en>; + + regulator-boot-on; + regulator-always-on; + }; +}; + +&apps_rsc { + pmc8280-1-rpmh-regulators { + compatible = "qcom,pm8350-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-l3-l5-supply = <&vreg_s11b>; + + vreg_s11b: smps11 { + regulator-name = "vreg_s11b"; + regulator-min-microvolt = <1272000>; + regulator-max-microvolt = <1272000>; + regulator-initial-mode = ; + }; + + vreg_l3b: ldo3 { + regulator-name = "vreg_l3b"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + regulator-boot-on; + }; + + vreg_l4b: ldo4 { + regulator-name = "vreg_l4b"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + }; + + vreg_l6b: ldo6 { + regulator-name = "vreg_l6b"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + regulator-boot-on; + regulator-always-on; // FIXME: VDD_A_EDP_0_0P9 + }; + }; + + pmc8280c-rpmh-regulators { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_l1c: ldo1 { + regulator-name = "vreg_l1c"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l12c: ldo12 { + regulator-name = "vreg_l12c"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l13c: ldo13 { + regulator-name = "vreg_l13c"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + }; + }; + + pmc8280-2-rpmh-regulators { + compatible = "qcom,pm8350-rpmh-regulators"; + qcom,pmic-id = "d"; + + vdd-l1-l4-supply = <&vreg_s11b>; + + vreg_l3d: ldo3 { + regulator-name = "vreg_l3d"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l4d: ldo4 { + regulator-name = "vreg_l4d"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l7d: ldo7 { + regulator-name = "vreg_l7d"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + }; + + vreg_l9d: ldo9 { + regulator-name = "vreg_l9d"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + }; + }; +}; + +&pmc8280c_lpg { + status = "okay"; +}; + +&pmk8280_pon_pwrkey { + status = "okay"; +}; + +&qup0 { + status = "okay"; +}; + +&qup0_i2c4 { + clock-frequency = <400000>; + + pinctrl-names = "default"; + pinctrl-0 = <&qup0_i2c4_default>; + + status = "okay"; + + /* FIXME: verify */ + touchscreen@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts0_default>; + }; +}; + +&qup1 { + status = "okay"; +}; + +&qup2 { + status = "okay"; +}; + +&qup2_i2c5 { + clock-frequency = <400000>; + + pinctrl-names = "default"; + pinctrl-0 = <&qup2_i2c5_default>; + + status = "okay"; + + touchpad@15 { + compatible = "hid-over-i2c"; + reg = <0x15>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + + pinctrl-names = "default"; + pinctrl-0 = <&tpad_default>; + + wakeup-source; + + status = "disabled"; + }; + + touchpad@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + + hid-descr-addr = <0x20>; + interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + + pinctrl-names = "default"; + pinctrl-0 = <&tpad_default>; + + wakeup-source; + }; + + keyboard@68 { + compatible = "hid-over-i2c"; + reg = <0x68>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + + pinctrl-names = "default"; + pinctrl-0 = <&kybd_default>; + + wakeup-source; + }; +}; + +&remoteproc_adsp { + firmware-name = "qcom/sc8280xp/LENOVO/21BX/qcadsp8280.mbn"; + + status = "okay"; +}; + +&remoteproc_nsp0 { + firmware-name = "qcom/sc8280xp/LENOVO/21BX/qccdsp8280.mbn"; + + status = "okay"; +}; + +&usb_0 { + status = "okay"; +}; + +&usb_0_dwc3 { + /* TODO: Define USB-C connector properly */ + dr_mode = "host"; +}; + +&usb_0_hsphy { + vdda-pll-supply = <&vreg_l9d>; + vdda18-supply = <&vreg_l1c>; + vdda33-supply = <&vreg_l7d>; + + status = "okay"; +}; + +&usb_0_qmpphy { + vdda-phy-supply = <&vreg_l9d>; + vdda-pll-supply = <&vreg_l4d>; + + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + /* TODO: Define USB-C connector properly */ + dr_mode = "host"; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&vreg_l4b>; + vdda18-supply = <&vreg_l1c>; + vdda33-supply = <&vreg_l13c>; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vreg_l4b>; + vdda-pll-supply = <&vreg_l3b>; + + status = "okay"; +}; + +&xo_board_clk { + clock-frequency = <38400000>; +}; + +/* PINCTRL */ + +&pmc8280_1_gpios { + edp_bl_en: edp-bl-en-state { + pins = "gpio8"; + function = "normal"; + }; + + edp_bl_reg_en: edp-bl-reg-en-state { + pins = "gpio9"; + function = "normal"; + }; + + misc_3p3_reg_en: misc-3p3-reg-en-state { + pins = "gpio1"; + function = "normal"; + }; +}; + +&pmc8280c_gpios { + edp_bl_pwm: edp-bl-pwm-state { + pins = "gpio8"; + function = "func1"; + }; +}; + +&tlmm { + gpio-reserved-ranges = <70 2>, <74 6>, <125 2>, <128 2>, <154 4>; + + kybd_default: kybd-default-state { + disable { + pins = "gpio102"; + function = "gpio"; + output-low; + }; + + int-n { + pins = "gpio104"; + function = "gpio"; + bias-disable; + }; + + reset { + pins = "gpio105"; + function = "gpio"; + bias-disable; + }; + }; + + qup0_i2c4_default: qup0-i2c4-default-state { + pins = "gpio171", "gpio172"; + function = "qup4"; + bias-disable; + drive-strength = <16>; + }; + + qup2_i2c5_default: qup2-i2c5-default-state { + pins = "gpio81", "gpio82"; + function = "qup21"; + bias-disable; + drive-strength = <16>; + }; + + tpad_default: tpad-default-state { + int-n { + pins = "gpio182"; + function = "gpio"; + bias-disable; + }; + }; + + ts0_default: ts0-default-state { + int-n { + pins = "gpio175"; + function = "gpio"; + bias-disable; + }; + + reset-n { + pins = "gpio99"; + function = "gpio"; + output-high; + drive-strength = <16>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi new file mode 100644 index 000000000..be0df0856 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi @@ -0,0 +1,109 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Linaro Limited + */ + +#include +#include +#include + +&spmi_bus { + pmk8280: pmic@0 { + compatible = "qcom,pmk8350", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmk8280_pon: pon@1300 { + compatible = "qcom,pmk8350-pon"; + reg = <0x1300>, <0x800>; + reg-names = "hlos", "pbs"; + + pmk8280_pon_pwrkey: pwrkey { + compatible = "qcom,pmk8350-pwrkey"; + interrupts = <0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>; + linux,code = ; + status = "disabled"; + }; + }; + }; + + pmc8280_1: pmic@1 { + compatible = "qcom,pm8350", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmc8280_1_gpios: gpio@8800 { + compatible = "qcom,pm8350-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmc8280_1_gpios 0 0 10>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmc8280c: pmic@2 { + compatible = "qcom,pm8350c", "qcom,spmi-pmic"; + reg = <0x2 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmc8280c_gpios: gpio@8800 { + compatible = "qcom,pm8350c-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmc8280c_gpios 0 0 9>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pmc8280c_lpg: pwm { + compatible = "qcom,pm8350c-pwm"; + + #address-cells = <1>; + #size-cells = <0>; + + #pwm-cells = <2>; + + status = "disabled"; + }; + }; + + pmc8280_2: pmic@3 { + compatible = "qcom,pm8350", "qcom,spmi-pmic"; + reg = <0x3 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmc8280_2_gpios: gpio@8800 { + compatible = "qcom,pm8350-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmc8280_2_gpios 0 0 10>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmr735a: pmic@4 { + compatible = "qcom,pmr735a", "qcom,spmi-pmic"; + reg = <0x4 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmr735a_gpios: gpio@8800 { + compatible = "qcom,pmr735a-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmr735a_gpios 0 0 4>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi new file mode 100644 index 000000000..7e3aaf5de --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi @@ -0,0 +1,2137 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + * Copyright (c) 2022, Linaro Limited + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + clocks { + xo_board_clk: xo-board-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32764>; + }; + }; + + cpu0_opp_table: cpu0-opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + }; + opp-403200000 { + opp-hz = /bits/ 64 <403200000>; + }; + opp-499200000 { + opp-hz = /bits/ 64 <499200000>; + }; + opp-595200000 { + opp-hz = /bits/ 64 <595200000>; + }; + opp-691200000 { + opp-hz = /bits/ 64 <691200000>; + }; + opp-806400000 { + opp-hz = /bits/ 64 <806400000>; + }; + opp-902400000 { + opp-hz = /bits/ 64 <902400000>; + }; + opp-1017600000 { + opp-hz = /bits/ 64 <1017600000>; + }; + opp-1113600000 { + opp-hz = /bits/ 64 <1113600000>; + }; + opp-1209600000 { + opp-hz = /bits/ 64 <1209600000>; + }; + opp-1324800000 { + opp-hz = /bits/ 64 <1324800000>; + }; + opp-1440000000 { + opp-hz = /bits/ 64 <1440000000>; + }; + opp-1555200000 { + opp-hz = /bits/ 64 <1555200000>; + }; + opp-1670400000 { + opp-hz = /bits/ 64 <1670400000>; + }; + opp-1785600000 { + opp-hz = /bits/ 64 <1785600000>; + }; + opp-1881600000 { + opp-hz = /bits/ 64 <1881600000>; + }; + opp-1996800000 { + opp-hz = /bits/ 64 <1996800000>; + }; + opp-2112000000 { + opp-hz = /bits/ 64 <2112000000>; + }; + opp-2227200000 { + opp-hz = /bits/ 64 <2227200000>; + }; + opp-2342400000 { + opp-hz = /bits/ 64 <2342400000>; + }; + opp-2438400000 { + opp-hz = /bits/ 64 <2438400000>; + }; + }; + + cpu4_opp_table: cpu4-opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-825600000 { + opp-hz = /bits/ 64 <825600000>; + }; + opp-940800000 { + opp-hz = /bits/ 64 <940800000>; + }; + opp-1056000000 { + opp-hz = /bits/ 64 <1056000000>; + }; + opp-1171200000 { + opp-hz = /bits/ 64 <1171200000>; + }; + opp-1286400000 { + opp-hz = /bits/ 64 <1286400000>; + }; + opp-1401600000 { + opp-hz = /bits/ 64 <1401600000>; + }; + opp-1516800000 { + opp-hz = /bits/ 64 <1516800000>; + }; + opp-1632000000 { + opp-hz = /bits/ 64 <1632000000>; + }; + opp-1747200000 { + opp-hz = /bits/ 64 <1747200000>; + }; + opp-1862400000 { + opp-hz = /bits/ 64 <1862400000>; + }; + opp-1977600000 { + opp-hz = /bits/ 64 <1977600000>; + }; + opp-2073600000 { + opp-hz = /bits/ 64 <2073600000>; + }; + opp-2169600000 { + opp-hz = /bits/ 64 <2169600000>; + }; + opp-2284800000 { + opp-hz = /bits/ 64 <2284800000>; + }; + opp-2400000000 { + opp-hz = /bits/ 64 <2400000000>; + }; + opp-2496000000 { + opp-hz = /bits/ 64 <2496000000>; + }; + opp-2592000000 { + opp-hz = /bits/ 64 <2592000000>; + }; + opp-2688000000 { + opp-hz = /bits/ 64 <2688000000>; + }; + opp-2803200000 { + opp-hz = /bits/ 64 <2803200000>; + }; + opp-2899200000 { + opp-hz = /bits/ 64 <2899200000>; + }; + opp-2995200000 { + opp-hz = /bits/ 64 <2995200000>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x0>; + enable-method = "psci"; + capacity-dmips-mhz = <602>; + next-level-cache = <&L2_0>; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; + L2_0: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x100>; + enable-method = "psci"; + capacity-dmips-mhz = <602>; + next-level-cache = <&L2_100>; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; + L2_100: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x200>; + enable-method = "psci"; + capacity-dmips-mhz = <602>; + next-level-cache = <&L2_200>; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; + L2_200: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x300>; + enable-method = "psci"; + capacity-dmips-mhz = <602>; + next-level-cache = <&L2_300>; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; + L2_300: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x400>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_400>; + power-domains = <&CPU_PD4>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + #cooling-cells = <2>; + L2_400: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x500>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_500>; + power-domains = <&CPU_PD5>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + #cooling-cells = <2>; + L2_500: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x600>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_600>; + power-domains = <&CPU_PD6>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + #cooling-cells = <2>; + L2_600: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x700>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_700>; + power-domains = <&CPU_PD7>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + #cooling-cells = <2>; + L2_700: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + + core4 { + cpu = <&CPU4>; + }; + + core5 { + cpu = <&CPU5>; + }; + + core6 { + cpu = <&CPU6>; + }; + + core7 { + cpu = <&CPU7>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "little-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <355>; + exit-latency-us = <909>; + min-residency-us = <3934>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "big-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <241>; + exit-latency-us = <1461>; + min-residency-us = <4488>; + local-timer-stop; + }; + }; + + domain-idle-states { + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "domain-idle-state"; + idle-state-name = "cluster-power-collapse"; + arm,psci-suspend-param = <0x4100c344>; + entry-latency-us = <3263>; + exit-latency-us = <6562>; + min-residency-us = <9987>; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-sc8280xp", "qcom,scm"; + interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>; + }; + }; + + aggre1_noc: interconnect-aggre1-noc { + compatible = "qcom,sc8280xp-aggre1-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre2_noc: interconnect-aggre2-noc { + compatible = "qcom,sc8280xp-aggre2-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + clk_virt: interconnect-clk-virt { + compatible = "qcom,sc8280xp-clk-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + config_noc: interconnect-config-noc { + compatible = "qcom,sc8280xp-config-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + dc_noc: interconnect-dc-noc { + compatible = "qcom,sc8280xp-dc-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + gem_noc: interconnect-gem-noc { + compatible = "qcom,sc8280xp-gem-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + lpass_noc: interconnect-lpass-ag-noc { + compatible = "qcom,sc8280xp-lpass-ag-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mc_virt: interconnect-mc-virt { + compatible = "qcom,sc8280xp-mc-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mmss_noc: interconnect-mmss-noc { + compatible = "qcom,sc8280xp-mmss-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + nspa_noc: interconnect-nspa-noc { + compatible = "qcom,sc8280xp-nspa-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + nspb_noc: interconnect-nspb-noc { + compatible = "qcom,sc8280xp-nspb-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect-system-noc { + compatible = "qcom,sc8280xp-system-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x80000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = ; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + + CPU_PD0: cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD1: cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD2: cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD3: cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD4: cpu4 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD5: cpu5 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD6: cpu6 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD7: cpu7 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CLUSTER_PD: cpu-cluster0 { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP_0>; + }; + }; + + qup_opp_table_100mhz: qup-100mhz-opp-table { + compatible = "operating-points-v2"; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + reserved-region@80000000 { + reg = <0 0x80000000 0 0x860000>; + no-map; + }; + + cmd_db: cmd-db-region@80860000 { + compatible = "qcom,cmd-db"; + reg = <0 0x80860000 0 0x20000>; + no-map; + }; + + reserved-region@80880000 { + reg = <0 0x80880000 0 0x80000>; + no-map; + }; + + smem_mem: smem-region@80900000 { + compatible = "qcom,smem"; + reg = <0 0x80900000 0 0x200000>; + no-map; + hwlocks = <&tcsr_mutex 3>; + }; + + reserved-region@80b00000 { + reg = <0 0x80b00000 0 0x100000>; + no-map; + }; + + reserved-region@83b00000 { + reg = <0 0x83b00000 0 0x1700000>; + no-map; + }; + + reserved-region@85b00000 { + reg = <0 0x85b00000 0 0xc00000>; + no-map; + }; + + pil_adsp_mem: adsp-region@86c00000 { + reg = <0 0x86c00000 0 0x2000000>; + no-map; + }; + + pil_nsp0_mem: cdsp0-region@8a100000 { + reg = <0 0x8a100000 0 0x1e00000>; + no-map; + }; + + pil_nsp1_mem: cdsp1-region@8c600000 { + reg = <0 0x8c600000 0 0x1e00000>; + no-map; + }; + + reserved-region@aeb00000 { + reg = <0 0xaeb00000 0 0x16600000>; + no-map; + }; + }; + + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + smp2p_adsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_adsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-nsp0 { + compatible = "qcom,smp2p"; + qcom,smem = <94>, <432>; + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + smp2p_nsp0_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_nsp0_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-nsp1 { + compatible = "qcom,smp2p"; + qcom,smem = <617>, <616>; + interrupts-extended = <&ipcc IPCC_CLIENT_NSP1 + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_NSP1 + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <12>; + + smp2p_nsp1_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_nsp1_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-sc8280xp"; + reg = <0x0 0x00100000 0x0 0x1f0000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <&usb_0_ssphy>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <&usb_1_ssphy>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>; + power-domains = <&rpmhpd SC8280XP_CX>; + }; + + ipcc: mailbox@408000 { + compatible = "qcom,sc8280xp-ipcc", "qcom,ipcc"; + reg = <0 0x00408000 0 0x1000>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <3>; + #mbox-cells = <2>; + }; + + qup2: geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x008c0000 0 0x2000>; + clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; + iommus = <&apps_smmu 0xa3 0>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + qup2_uart17: serial@884000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00884000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + clock-names = "se"; + interrupts = ; + operating-points-v2 = <&qup_opp_table_100mhz>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + qup2_i2c5: i2c@894000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00894000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + }; + + qup0: geniqup@9c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x009c0000 0 0x6000>; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; + iommus = <&apps_smmu 0x563 0>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + qup0_i2c4: i2c@990000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00990000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + }; + + qup1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x00ac0000 0 0x6000>; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; + iommus = <&apps_smmu 0x83 0>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + }; + + ufs_mem_hc: ufs@1d84000 { + compatible = "qcom,sc8280xp-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0 0x01d84000 0 0x3000>; + interrupts = ; + phys = <&ufs_mem_phy_lanes>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + power-domains = <&gcc UFS_PHY_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + iommus = <&apps_smmu 0xe0 0x0>; + dma-coherent; + + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&gcc GCC_UFS_REF_CLKREF_CLK>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + clock-names = "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + freq-table-hz = <75000000 300000000>, + <0 0>, + <0 0>, + <75000000 300000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>; + status = "disabled"; + }; + + ufs_mem_phy: phy@1d87000 { + compatible = "qcom,sc8280xp-qmp-ufs-phy"; + reg = <0 0x01d87000 0 0x1c8>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clock-names = "ref", + "ref_aux"; + clocks = <&gcc GCC_UFS_CARD_CLKREF_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + status = "disabled"; + + ufs_mem_phy_lanes: phy@1d87400 { + reg = <0 0x01d87400 0 0x108>, + <0 0x01d87600 0 0x1e0>, + <0 0x01d87c00 0 0x1dc>, + <0 0x01d87800 0 0x108>, + <0 0x01d87a00 0 0x1e0>; + #phy-cells = <0>; + }; + }; + + ufs_card_hc: ufs@1da4000 { + compatible = "qcom,sc8280xp-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0 0x01da4000 0 0x3000>; + interrupts = ; + phys = <&ufs_card_phy_lanes>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_CARD_BCR>; + reset-names = "rst"; + + power-domains = <&gcc UFS_CARD_GDSC>; + + iommus = <&apps_smmu 0x4a0 0x0>; + dma-coherent; + + clocks = <&gcc GCC_UFS_CARD_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_CARD_AXI_CLK>, + <&gcc GCC_UFS_CARD_AHB_CLK>, + <&gcc GCC_UFS_CARD_UNIPRO_CORE_CLK>, + <&gcc GCC_UFS_REF_CLKREF_CLK>, + <&gcc GCC_UFS_CARD_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_CARD_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_CARD_RX_SYMBOL_1_CLK>; + clock-names = "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + freq-table-hz = <75000000 300000000>, + <0 0>, + <0 0>, + <75000000 300000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>; + status = "disabled"; + }; + + ufs_card_phy: phy@1da7000 { + compatible = "qcom,sc8280xp-qmp-ufs-phy"; + reg = <0 0x01da7000 0 0x1c8>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clock-names = "ref", + "ref_aux"; + clocks = <&gcc GCC_UFS_1_CARD_CLKREF_CLK>, + <&gcc GCC_UFS_CARD_PHY_AUX_CLK>; + + resets = <&ufs_card_hc 0>; + reset-names = "ufsphy"; + + status = "disabled"; + + ufs_card_phy_lanes: phy@1da7400 { + reg = <0 0x01da7400 0 0x108>, + <0 0x01da7600 0 0x1e0>, + <0 0x01da7c00 0 0x1dc>, + <0 0x01da7800 0 0x108>, + <0 0x01da7a00 0 0x1e0>; + #phy-cells = <0>; + }; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x01f40000 0x0 0x20000>; + #hwlock-cells = <1>; + }; + + usb_0_hsphy: phy@88e5000 { + compatible = "qcom,sc8280xp-usb-hs-phy", + "qcom,usb-snps-hs-5nm-phy"; + reg = <0 0x088e5000 0 0x400>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_2_hsphy0: phy@88e7000 { + compatible = "qcom,sc8280xp-usb-hs-phy", + "qcom,usb-snps-hs-5nm-phy"; + reg = <0 0x088e7000 0 0x400>; + clocks = <&gcc GCC_USB2_HS0_CLKREF_CLK>; + clock-names = "ref"; + resets = <&gcc GCC_QUSB2PHY_HS0_MP_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_2_hsphy1: phy@88e8000 { + compatible = "qcom,sc8280xp-usb-hs-phy", + "qcom,usb-snps-hs-5nm-phy"; + reg = <0 0x088e8000 0 0x400>; + clocks = <&gcc GCC_USB2_HS1_CLKREF_CLK>; + clock-names = "ref"; + resets = <&gcc GCC_QUSB2PHY_HS1_MP_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_2_hsphy2: phy@88e9000 { + compatible = "qcom,sc8280xp-usb-hs-phy", + "qcom,usb-snps-hs-5nm-phy"; + reg = <0 0x088e9000 0 0x400>; + clocks = <&gcc GCC_USB2_HS2_CLKREF_CLK>; + clock-names = "ref"; + resets = <&gcc GCC_QUSB2PHY_HS2_MP_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_2_hsphy3: phy@88ea000 { + compatible = "qcom,sc8280xp-usb-hs-phy", + "qcom,usb-snps-hs-5nm-phy"; + reg = <0 0x088ea000 0 0x400>; + clocks = <&gcc GCC_USB2_HS3_CLKREF_CLK>; + clock-names = "ref"; + resets = <&gcc GCC_QUSB2PHY_HS3_MP_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_2_qmpphy0: phy-wrapper@88ef000 { + compatible = "qcom,sc8280xp-qmp-usb3-uni-phy"; + reg = <0 0x088ef000 0 0x1c8>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_MP0_CLKREF_CLK>, + <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>; + clock-names = "aux", "ref_clk_src", "ref", "com_aux"; + + resets = <&gcc GCC_USB3_UNIPHY_MP0_BCR>, + <&gcc GCC_USB3UNIPHY_PHY_MP0_BCR>; + reset-names = "phy", "common"; + + power-domains = <&gcc USB30_MP_GDSC>; + + status = "disabled"; + + usb_2_ssphy0: phy@88efe00 { + reg = <0 0x088efe00 0 0x160>, + <0 0x088f0000 0 0x1ec>, + <0 0x088ef200 0 0x1f0>; + #phy-cells = <0>; + #clock-cells = <0>; + clocks = <&gcc GCC_USB3_MP_PHY_PIPE_0_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb2_phy0_pipe_clk"; + }; + }; + + usb_2_qmpphy1: phy-wrapper@88f1000 { + compatible = "qcom,sc8280xp-qmp-usb3-uni-phy"; + reg = <0 0x088f1000 0 0x1c8>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_MP1_CLKREF_CLK>, + <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>; + clock-names = "aux", "ref_clk_src", "ref", "com_aux"; + + resets = <&gcc GCC_USB3_UNIPHY_MP1_BCR>, + <&gcc GCC_USB3UNIPHY_PHY_MP1_BCR>; + reset-names = "phy", "common"; + + power-domains = <&gcc USB30_MP_GDSC>; + + status = "disabled"; + + usb_2_ssphy1: phy@88f1e00 { + reg = <0 0x088f1e00 0 0x160>, + <0 0x088f2000 0 0x1ec>, + <0 0x088f1200 0 0x1f0>; + #phy-cells = <0>; + #clock-cells = <0>; + clocks = <&gcc GCC_USB3_MP_PHY_PIPE_1_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb2_phy1_pipe_clk"; + }; + }; + + remoteproc_adsp: remoteproc@3000000 { + compatible = "qcom,sc8280xp-adsp-pas"; + reg = <0 0x03000000 0 0x100>; + + interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack", "shutdown-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SC8280XP_LCX>, + <&rpmhpd SC8280XP_LMX>; + power-domain-names = "lcx", "lmx"; + + memory-region = <&pil_adsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + remoteproc_adsp_glink: glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "lpass"; + qcom,remote-pid = <2>; + }; + }; + + usb_0_qmpphy: phy-wrapper@88ec000 { + compatible = "qcom,sc8280xp-qmp-usb43dp-phy"; + reg = <0 0x088ec000 0 0x1e4>, + <0 0x088eb000 0 0x40>, + <0 0x088ed000 0 0x1c8>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB4_EUD_CLKREF_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; + clock-names = "aux", "ref_clk_src", "ref", "com_aux"; + + resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, + <&gcc GCC_USB4_DP_PHY_PRIM_BCR>; + reset-names = "phy", "common"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + + status = "disabled"; + + usb_0_ssphy: usb3-phy@88eb400 { + reg = <0 0x088eb400 0 0x100>, + <0 0x088eb600 0 0x3ec>, + <0 0x088ec400 0 0x364>, + <0 0x088eba00 0 0x100>, + <0 0x088ebc00 0 0x3ec>, + <0 0x088ec200 0 0x18>; + #phy-cells = <0>; + #clock-cells = <0>; + clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb0_phy_pipe_clk_src"; + }; + }; + + usb_1_hsphy: phy@8902000 { + compatible = "qcom,sc8280xp-usb-hs-phy", + "qcom,usb-snps-hs-5nm-phy"; + reg = <0 0x08902000 0 0x400>; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; + + status = "disabled"; + }; + + usb_1_qmpphy: phy-wrapper@8904000 { + compatible = "qcom,sc8280xp-qmp-usb43dp-phy"; + reg = <0 0x08904000 0 0x1e4>, + <0 0x08903000 0 0x40>, + <0 0x08905000 0 0x1c8>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB4_CLKREF_CLK>, + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>; + clock-names = "aux", "ref_clk_src", "ref", "com_aux"; + + resets = <&gcc GCC_USB3_PHY_SEC_BCR>, + <&gcc GCC_USB4_1_DP_PHY_PRIM_BCR>; + reset-names = "phy", "common"; + + power-domains = <&gcc USB30_SEC_GDSC>; + + status = "disabled"; + + usb_1_ssphy: usb3-phy@8903400 { + reg = <0 0x08903400 0 0x100>, + <0 0x08903600 0 0x3ec>, + <0 0x08904400 0 0x364>, + <0 0x08903a00 0 0x100>, + <0 0x08903c00 0 0x3ec>, + <0 0x08904200 0 0x18>; + #phy-cells = <0>; + #clock-cells = <0>; + clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb1_phy_pipe_clk_src"; + }; + }; + + system-cache-controller@9200000 { + compatible = "qcom,sc8280xp-llcc"; + reg = <0 0x09200000 0 0x58000>, <0 0x09600000 0 0x58000>; + reg-names = "llcc_base", "llcc_broadcast_base"; + interrupts = ; + }; + + usb_0: usb@a6f8800 { + compatible = "qcom,sc8280xp-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_NORTH_AXI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_SOUTH_AXI_CLK>, + <&gcc GCC_SYS_NOC_USB_AXI_CLK>; + clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi", + "noc_aggr", "noc_aggr_north", "noc_aggr_south", "noc_sys"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 804 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 14 IRQ_TYPE_EDGE_BOTH>, + <&pdc 15 IRQ_TYPE_EDGE_BOTH>, + <&pdc 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>; + interconnect-names = "usb-ddr", "apps-usb"; + + wakeup-source; + + status = "disabled"; + + usb_0_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xcd00>; + interrupts = ; + iommus = <&apps_smmu 0x820 0x0>; + phys = <&usb_0_hsphy>, <&usb_0_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + usb_1: usb@a8f8800 { + compatible = "qcom,sc8280xp-dwc3", "qcom,dwc3"; + reg = <0 0x0a8f8800 0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_SLEEP_CLK>, + <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_NORTH_AXI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_SOUTH_AXI_CLK>, + <&gcc GCC_SYS_NOC_USB_AXI_CLK>; + clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi", + "noc_aggr", "noc_aggr_north", "noc_aggr_south", "noc_sys"; + + assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 12 IRQ_TYPE_EDGE_BOTH>, + <&pdc 13 IRQ_TYPE_EDGE_BOTH>, + <&pdc 136 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; + + power-domains = <&gcc USB30_SEC_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + resets = <&gcc GCC_USB30_SEC_BCR>; + + interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>; + interconnect-names = "usb-ddr", "apps-usb"; + + wakeup-source; + + status = "disabled"; + + usb_1_dwc3: usb@a800000 { + compatible = "snps,dwc3"; + reg = <0 0x0a800000 0 0xcd00>; + interrupts = ; + iommus = <&apps_smmu 0x860 0x0>; + phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,sc8280xp-pdc", "qcom,pdc"; + reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>; + qcom,pdc-ranges = <0 480 40>, + <40 140 14>, + <54 263 1>, + <55 306 4>, + <59 312 3>, + <62 374 2>, + <64 434 2>, + <66 438 3>, + <69 86 1>, + <70 520 54>, + <124 609 28>, + <159 638 1>, + <160 720 8>, + <168 801 1>, + <169 728 30>, + <199 416 2>, + <201 449 1>, + <202 89 1>, + <203 451 1>, + <204 462 1>, + <205 264 1>, + <206 579 1>, + <207 653 1>, + <208 656 1>, + <209 659 1>, + <210 122 1>, + <211 699 1>, + <212 705 1>, + <213 450 1>, + <214 643 1>, + <216 646 5>, + <221 390 5>, + <226 700 3>, + <229 240 3>, + <232 269 1>, + <233 377 1>, + <234 372 1>, + <235 138 1>, + <236 857 1>, + <237 860 1>, + <238 137 1>, + <239 668 1>, + <240 366 1>, + <241 949 1>, + <242 815 5>, + <247 769 1>, + <248 768 1>, + <249 663 1>, + <250 799 2>, + <252 798 1>, + <253 765 1>, + <254 763 1>, + <255 454 1>, + <258 139 1>, + <259 786 2>, + <261 370 2>, + <263 158 2>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + tsens0: thermal-sensor@c263000 { + compatible = "qcom,sc8280xp-tsens", "qcom,tsens-v2"; + reg = <0 0x0c263000 0 0x1ff>, /* TM */ + <0 0x0c222000 0 0x8>; /* SROT */ + #qcom,sensors = <14>; + interrupts-extended = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 28 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c265000 { + compatible = "qcom,sc8280xp-tsens", "qcom,tsens-v2"; + reg = <0 0x0c265000 0 0x1ff>, /* TM */ + <0 0x0c223000 0 0x8>; /* SROT */ + #qcom,sensors = <16>; + interrupts-extended = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 29 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + aoss_qmp: power-controller@c300000 { + compatible = "qcom,sc8280xp-aoss-qmp", "qcom,aoss-qmp"; + reg = <0 0x0c300000 0 0x400>; + interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; + + #clock-cells = <0>; + }; + + spmi_bus: spmi@c440000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0 0x0c440000 0 0x1100>, + <0 0x0c600000 0 0x2000000>, + <0 0x0e600000 0 0x100000>, + <0 0x0e700000 0 0xa0000>, + <0 0x0c40a000 0 0x26000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + tlmm: pinctrl@f100000 { + compatible = "qcom,sc8280xp-tlmm"; + reg = <0 0x0f100000 0 0x300000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 230>; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,sc8280xp-smmu-500", "arm,mmu-500"; + reg = <0 0x15000000 0 0x100000>; + #iommu-cells = <2>; + #global-interrupts = <2>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + }; + + intc: interrupt-controller@17a00000 { + compatible = "arm,gic-v3"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */ + <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */ + interrupts = ; + #redistributor-regions = <1>; + redistributor-stride = <0 0x20000>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gic-its@17a40000 { + compatible = "arm,gic-v3-its"; + reg = <0 0x17a40000 0 0x20000>; + msi-controller; + #msi-cells = <1>; + }; + }; + + watchdog@17c10000 { + compatible = "qcom,apss-wdt-sc8280xp", "qcom,kpss-wdt"; + reg = <0 0x17c10000 0 0x1000>; + clocks = <&sleep_clk>; + interrupts = ; + }; + + timer@17c20000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0 0x17c20000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x0 0x20000000>; + + frame@17c21000 { + frame-number = <0>; + interrupts = , + ; + reg = <0x17c21000 0x1000>, + <0x17c22000 0x1000>; + }; + + frame@17c23000 { + frame-number = <1>; + interrupts = ; + reg = <0x17c23000 0x1000>; + status = "disabled"; + }; + + frame@17c25000 { + frame-number = <2>; + interrupts = ; + reg = <0x17c25000 0x1000>; + status = "disabled"; + }; + + frame@17c27000 { + frame-number = <3>; + interrupts = ; + reg = <0x17c26000 0x1000>; + status = "disabled"; + }; + + frame@17c29000 { + frame-number = <4>; + interrupts = ; + reg = <0x17c29000 0x1000>; + status = "disabled"; + }; + + frame@17c2b000 { + frame-number = <5>; + interrupts = ; + reg = <0x17c2b000 0x1000>; + status = "disabled"; + }; + + frame@17c2d000 { + frame-number = <6>; + interrupts = ; + reg = <0x17c2d000 0x1000>; + status = "disabled"; + }; + }; + + apps_rsc: rsc@18200000 { + compatible = "qcom,rpmh-rsc"; + reg = <0x0 0x18200000 0x0 0x10000>, + <0x0 0x18210000 0x0 0x10000>, + <0x0 0x18220000 0x0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = , + , + ; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = , , + , ; + label = "apps_rsc"; + power-domains = <&CLUSTER_PD>; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + + rpmhcc: clock-controller { + compatible = "qcom,sc8280xp-rpmh-clk"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board_clk>; + }; + + rpmhpd: power-controller { + compatible = "qcom,sc8280xp-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = ; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = ; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = ; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = ; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = ; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = ; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = ; + }; + + rpmhpd_opp_nom_l2: opp8 { + opp-level = ; + }; + + rpmhpd_opp_turbo: opp9 { + opp-level = ; + }; + + rpmhpd_opp_turbo_l1: opp10 { + opp-level = ; + }; + }; + }; + }; + + cpufreq_hw: cpufreq@18591000 { + compatible = "qcom,sc8280xp-cpufreq-epss", "qcom,cpufreq-epss"; + reg = <0 0x18591000 0 0x1000>, + <0 0x18592000 0 0x1000>; + reg-names = "freq-domain0", "freq-domain1"; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; + clock-names = "xo", "alternate"; + + #freq-domain-cells = <1>; + }; + + remoteproc_nsp0: remoteproc@1b300000 { + compatible = "qcom,sc8280xp-nsp0-pas"; + reg = <0 0x1b300000 0 0x100>; + + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_nsp0_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_nsp0_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_nsp0_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_nsp0_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SC8280XP_NSP>; + power-domain-names = "nsp"; + + memory-region = <&pil_nsp0_mem>; + + qcom,smem-states = <&smp2p_nsp0_out 0>; + qcom,smem-state-names = "stop"; + + interconnects = <&nspa_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "nsp0"; + qcom,remote-pid = <5>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "cdsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x3181 0x0420>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x3182 0x0420>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x3183 0x0420>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x3184 0x0420>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x3185 0x0420>; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x3186 0x0420>; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x3187 0x0420>; + }; + + compute-cb@8 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <8>; + iommus = <&apps_smmu 0x3188 0x0420>; + }; + + compute-cb@9 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <9>; + iommus = <&apps_smmu 0x318b 0x0420>; + }; + + compute-cb@10 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <10>; + iommus = <&apps_smmu 0x318b 0x0420>; + }; + + compute-cb@11 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <11>; + iommus = <&apps_smmu 0x318c 0x0420>; + }; + + compute-cb@12 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <12>; + iommus = <&apps_smmu 0x318d 0x0420>; + }; + + compute-cb@13 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <13>; + iommus = <&apps_smmu 0x318e 0x0420>; + }; + + compute-cb@14 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <14>; + iommus = <&apps_smmu 0x318f 0x0420>; + }; + }; + }; + }; + + remoteproc_nsp1: remoteproc@21300000 { + compatible = "qcom,sc8280xp-nsp1-pas"; + reg = <0 0x21300000 0 0x100>; + + interrupts-extended = <&intc GIC_SPI 887 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_nsp1_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_nsp1_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_nsp1_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_nsp1_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SC8280XP_NSP>; + power-domain-names = "nsp"; + + memory-region = <&pil_nsp1_mem>; + + qcom,smem-states = <&smp2p_nsp1_out 0>; + qcom,smem-state-names = "stop"; + + interconnects = <&nspb_noc MASTER_CDSP_PROC_B 0 &mc_virt SLAVE_EBI1 0>; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_NSP1 + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_NSP1 + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "nsp1"; + qcom,remote-pid = <12>; + }; + }; + }; + + thermal-zones { + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 1>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 2>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 3>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 4>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu4-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 5>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu5-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 6>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu6-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 7>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu7-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 8>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cluster0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 9>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + mem-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 15>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts new file mode 100644 index 000000000..28050bc5f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts @@ -0,0 +1,461 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Linaro Ltd. + * Copyright (c) 2020, Konrad Dybcio + * Copyright (c) 2020, AngeloGioacchino Del Regno + * + */ + +/dts-v1/; + +#include "sdm660.dtsi" +#include "pm660.dtsi" +#include "pm660l.dtsi" + +/ { + model = "Inforce 6560 Single Board Computer"; + compatible = "inforce,ifc6560", "qcom,sda660"; + chassis-type = "embedded"; /* SBC */ + + aliases { + serial0 = &blsp1_uart2; + serial1 = &blsp2_uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + volup { + label = "Volume Up"; + gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <15>; + }; + }; + + /* + * Until we hook up type-c detection, we + * have to stick with this. But it works. + */ + extcon_usb: extcon-usb { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&tlmm 58 GPIO_ACTIVE_HIGH>; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&adv7533_out>; + }; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3800000>; + regulator-max-microvolt = <3800000>; + + regulator-always-on; + regulator-boot-on; + }; + + v3p3_bck_bst: v3p3-bck-bst-regulator { + compatible = "regulator-fixed"; + regulator-name = "v3p3_bck_bst"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + vin-supply = <&vph_pwr>; + }; + + v1p2_ldo: v1p2-ldo-regulator { + compatible = "regulator-fixed"; + regulator-name = "v1p2_ldo"; + + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + vin-supply = <&vph_pwr>; + }; + + v5p0_boost: v5p0-boost-regulator { + compatible = "regulator-fixed"; + regulator-name = "v5p0_boost"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + vin-supply = <&vph_pwr>; + }; +}; + +&adsp_pil { + firmware-name = "qcom/ifc6560/adsp.mbn"; +}; + +&blsp_i2c6 { + status = "okay"; + + adv7533: hdmi@39 { + compatible = "adi,adv7535"; + reg = <0x39>, <0x66>; + reg-names = "main", "edid"; + + interrupt-parent = <&pm660l_gpios>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + + clocks = <&rpmcc RPM_SMD_BB_CLK2>; + clock-names = "cec"; + /* + * Limit to 3 lanes to prevent the bridge from changing amount + * of lanes in the fly. MSM DSI host doesn't like that. + */ + adi,dsi-lanes = <3>; + avdd-supply = <&vreg_l13a_1p8>; + dvdd-supply = <&vreg_l13a_1p8>; + pvdd-supply = <&vreg_l13a_1p8>; + a2vdd-supply = <&vreg_l13a_1p8>; + v3p3-supply = <&v3p3_bck_bst>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adv7533_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + + adv7533_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; +}; + +&blsp1_dma { + /* + * The board will lock up if we toggle the BLSP clock, unless the + * BAM DMA interconnects support is in place. + */ + /delete-property/ clocks; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&blsp2_dma { + /* + * The board will lock up if we toggle the BLSP clock, unless the + * BAM DMA interconnects support is in place. + */ + /delete-property/ clocks; +}; + +&blsp2_uart1 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + vddio-supply = <&vreg_l13a_1p8>; + vddxo-supply = <&vreg_l9a_1p8>; + vddrf-supply = <&vreg_l6a_1p3>; + vddch0-supply = <&vreg_l19a_3p3>; + max-speed = <3200000>; + }; +}; + +&dsi0 { + status = "okay"; + vdda-supply = <&vreg_l1a_1p225>; +}; + +&dsi0_out { + remote-endpoint = <&adv7533_in>; + data-lanes = <0 1 2 3>; +}; + +&dsi0_phy { + status = "okay"; + vcca-supply = <&vreg_l1b_0p925>; +}; + +&mdss { + status = "okay"; +}; + +&mmss_smmu { + status = "okay"; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + status = "okay"; + + linux,code = ; +}; + +&qusb2phy0 { + status = "okay"; + + vdd-supply = <&vreg_l1b_0p925>; + vdda-phy-dpdm-supply = <&vreg_l7b_3p125>; +}; + +&qusb2phy1 { + status = "okay"; + + vdd-supply = <&vreg_l1b_0p925>; + vdda-phy-dpdm-supply = <&vreg_l7b_3p125>; +}; + +&rpm_requests { + pm660-regulators { + compatible = "qcom,rpm-pm660-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + + vdd_l1_l6_l7-supply = <&vreg_s5a_1p35>; + vdd_l2_l3-supply = <&vreg_s2b_1p05>; + vdd_l5-supply = <&vreg_s2b_1p05>; + vdd_l8_l9_l10_l11_l12_l13_l14-supply = <&vreg_s4a_2p04>; + vdd_l15_l16_l17_l18_l19-supply = <&vreg_bob>; + + vreg_s4a_2p04: s4 { + regulator-min-microvolt = <1805000>; + regulator-max-microvolt = <2040000>; + regulator-enable-ramp-delay = <200>; + regulator-ramp-delay = <0>; + regulator-always-on; + }; + + vreg_s5a_1p35: s5 { + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1350000>; + regulator-enable-ramp-delay = <200>; + regulator-ramp-delay = <0>; + }; + + vreg_l1a_1p225: l1 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1250000>; + regulator-enable-ramp-delay = <250>; + regulator-allow-set-load; + }; + + vreg_l6a_1p3: l6 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1368000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + regulator-allow-set-load; + }; + + vreg_l8a_1p8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + regulator-system-load = <325000>; + regulator-allow-set-load; + }; + + vreg_l9a_1p8: l9 { + regulator-min-microvolt = <1804000>; + regulator-max-microvolt = <1896000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + regulator-allow-set-load; + }; + + vreg_l13a_1p8: l13 { + /* This gives power to the LPDDR4: never turn it off! */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1944000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + regulator-always-on; + regulator-boot-on; + }; + + vreg_l19a_3p3: l19 { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3400000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + regulator-allow-set-load; + }; + }; + + pm660l-regulators { + compatible = "qcom,rpm-pm660l-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + + vdd_l1_l9_l10-supply = <&vreg_s2b_1p05>; + vdd_l2-supply = <&vreg_bob>; + vdd_l3_l5_l7_l8-supply = <&vreg_bob>; + vdd_l4_l6-supply = <&vreg_bob>; + vdd_bob-supply = <&vph_pwr>; + + vreg_s2b_1p05: s2 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-enable-ramp-delay = <200>; + regulator-ramp-delay = <0>; + }; + + vreg_l1b_0p925: l1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <925000>; + regulator-enable-ramp-delay = <250>; + regulator-allow-set-load; + }; + + vreg_l2b_2p95: l2 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <3100000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + regulator-allow-set-load; + }; + + vreg_l4b_2p95: l4 { + regulator-min-microvolt = <2944000>; + regulator-max-microvolt = <2952000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + + regulator-min-microamp = <200>; + regulator-max-microamp = <600000>; + regulator-system-load = <570000>; + regulator-allow-set-load; + }; + + /* + * Downstream specifies a range of 1721-3600mV, + * but the only assigned consumers are SDHCI2 VMMC + * and Coresight QPDI that both request pinned 2.95V. + * Tighten the range to 1.8-3.328 (closest to 3.3) to + * make the mmc driver happy. + */ + vreg_l5b_2p95: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3328000>; + regulator-enable-ramp-delay = <250>; + regulator-system-load = <800000>; + regulator-ramp-delay = <0>; + regulator-allow-set-load; + }; + + vreg_l7b_3p125: l7 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3125000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l8b_3p3: l8 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3400000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + }; + + vreg_bob: bob { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3624000>; + regulator-enable-ramp-delay = <500>; + regulator-ramp-delay = <0>; + }; + }; +}; + +&sdc2_state_on { + sd-cd { + pins = "gpio54"; + bias-pull-up; + drive-strength = <2>; + }; +}; + +&sdc2_state_off { + sd-cd { + pins = "gpio54"; + bias-disable; + drive-strength = <2>; + }; +}; + +&sdhc_1 { + status = "okay"; + supports-cqe; + + vmmc-supply = <&vreg_l4b_2p95>; + vqmmc-supply = <&vreg_l8a_1p8>; + + mmc-ddr-1_8v; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; +}; + +&sdhc_2 { + status = "okay"; + + vmmc-supply = <&vreg_l5b_2p95>; + vqmmc-supply = <&vreg_l2b_2p95>; + + cd-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>; + no-sdio; + no-emmc; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <8 4>; +}; + +&usb2 { + status = "okay"; +}; + +&usb2_dwc3 { + dr_mode = "host"; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + dr_mode = "peripheral"; + extcon = <&extcon_usb>; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts new file mode 100644 index 000000000..71b448978 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Martin Botka + */ + +/dts-v1/; + +#include "sdm630.dtsi" +#include "sdm630-sony-xperia-nile.dtsi" + +/ { + model = "Sony Xperia 10"; + compatible = "sony,kirin-row", "qcom,sdm630"; + chassis-type = "handset"; + + chosen { + framebuffer@9d400000 { + reg = <0 0x9d400000 0 (2520 * 1080 * 4)>; + height = <2520>; + }; + }; +}; + +/* Ganges devices feature a Novatek touchscreen instead. */ +/delete-node/ &touchscreen; +/delete-node/ &vreg_l18a_1v8; diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts new file mode 100644 index 000000000..dd484a9bc --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio + */ + +/dts-v1/; + +#include "sdm630.dtsi" +#include "sdm630-sony-xperia-nile.dtsi" + +/ { + model = "Sony Xperia XA2 Ultra"; + compatible = "sony,discovery-row", "qcom,sdm630"; + chassis-type = "handset"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts new file mode 100644 index 000000000..2da83cd41 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio + */ + +/dts-v1/; + +#include "sdm630.dtsi" +#include "sdm630-sony-xperia-nile.dtsi" + +/ { + model = "Sony Xperia XA2"; + compatible = "sony,pioneer-row", "qcom,sdm630"; + chassis-type = "handset"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts new file mode 100644 index 000000000..a679d4ace --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio + */ + +/dts-v1/; + +#include "sdm630.dtsi" +#include "sdm630-sony-xperia-nile.dtsi" + +/ { + model = "Sony Xperia XA2 Plus"; + compatible = "sony,voyager-row", "qcom,sdm630"; + chassis-type = "handset"; + + chosen { + framebuffer@9d400000 { + reg = <0 0x9d400000 0 (2160 * 1080 * 4)>; + height = <2160>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi new file mode 100644 index 000000000..09c078007 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi @@ -0,0 +1,659 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio + * Copyright (c) 2020, AngeloGioacchino Del Regno + * + */ + +#include "pm660.dtsi" +#include "pm660l.dtsi" +#include +#include +#include +#include + +/ { + /* required for bootloader to select correct board */ + qcom,msm-id = <318 0>; + qcom,board-id = <8 1>; + qcom,pmic-id = <0x1001b 0x101011a 0x00 0x00 0x1001b 0x201011a 0x00 0x00>; + + /* This part enables graphical output via bootloader-enabled display */ + chosen { + bootargs = "earlycon=tty0 console=tty0"; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + stdout-path = "framebuffer0"; + + framebuffer0: framebuffer@9d400000 { + compatible = "simple-framebuffer"; + reg = <0 0x9d400000 0 (1920 * 1080 * 4)>; + width = <1080>; + height = <1920>; + stride = <(1080 * 4)>; + format = "a8r8g8b8"; + status = "okay"; + }; + }; + + board_vbat: vbat-regulator { + compatible = "regulator-fixed"; + regulator-name = "VBAT"; + + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <4000000>; + regulator-always-on; + regulator-boot-on; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + + regulator-always-on; + regulator-boot-on; + }; + + cam_vdig_imx300_219_vreg: cam_vdig_imx300_219_vreg { + compatible = "regulator-fixed"; + regulator-name = "cam_vdig_imx300_219_vreg"; + startup-delay-us = <0>; + enable-active-high; + gpio = <&tlmm 52 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cam_vdig_default>; + }; + + cam_vana_front_vreg: cam_vana_front_vreg { + compatible = "regulator-fixed"; + regulator-name = "cam_vana_front_vreg"; + startup-delay-us = <0>; + enable-active-high; + gpio = <&tlmm 51 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&imx219_vana_default>; + }; + + cam_vana_rear_vreg: cam_vana_rear_vreg { + compatible = "regulator-fixed"; + regulator-name = "cam_vana_rear_vreg"; + startup-delay-us = <0>; + enable-active-high; + gpio = <&tlmm 50 GPIO_ACTIVE_HIGH>; + regulator-always-on; + pinctrl-names = "default"; + pinctrl-0 = <&imx300_vana_default>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-camera-focus { + label = "Camera Focus"; + gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + debounce-interval = <15>; + }; + + key-camera-snapshot { + label = "Camera Snapshot"; + gpios = <&tlmm 113 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + debounce-interval = <15>; + }; + + key-vol-down { + label = "Volume Down"; + gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + gpio-key,wakeup; + debounce-interval = <15>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ramoops@ffc00000 { + compatible = "ramoops"; + reg = <0x0 0xffc00000 0x0 0x100000>; + record-size = <0x10000>; + console-size = <0x60000>; + ftrace-size = <0x10000>; + pmsg-size = <0x20000>; + ecc-size = <16>; + status = "okay"; + }; + + debug_region@ffb00000 { + reg = <0x00 0xffb00000 0x00 0x100000>; + no-map; + }; + + removed_region@85800000 { + reg = <0x00 0x85800000 0x00 0x3700000>; + no-map; + }; + }; + + /* + * Until we hook up type-c detection, we + * have to stick with this. But it works. + */ + extcon_usb: extcon-usb { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&tlmm 58 GPIO_ACTIVE_HIGH>; + }; +}; + +&adsp_pil { + firmware-name = "adsp.mdt"; +}; + +&blsp_i2c1 { + status = "okay"; + + touchscreen: synaptics-rmi4-i2c@70 { + compatible = "syna,rmi4-i2c"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + interrupts-extended = <&tlmm 45 0x2008>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_active &ts_lcd_id_active>; + + syna,reset-delay-ms = <200>; + syna,startup-delay-ms = <220>; + + rmi4-f01@1 { + reg = <0x01>; + syna,nosleep-mode = <1>; + }; + + rmi4-f11@11 { + reg = <0x11>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp_i2c2 { + status = "okay"; + + /* SMB1351 charger */ +}; + +/* I2C3, 4, 5, 7 and 8 are disabled on this board. */ + +&blsp_i2c6 { + status = "okay"; + + /* NXP NFC */ +}; + +&blsp1_uart2 { + status = "okay"; + + /* MSM serial console */ +}; + +&blsp2_uart1 { + status = "okay"; + + /* HCI Bluetooth */ +}; + +&pm660l_lpg { + qcom,power-source = <1>; + + status = "okay"; + + multi-led { + color = ; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + color = ; + }; + + led@2 { + reg = <2>; + color = ; + }; + + led@3 { + reg = <3>; + color = ; + }; + }; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + status = "okay"; + + linux,code = ; +}; + +&qusb2phy0 { + status = "okay"; + + vdd-supply = <&vreg_l1b_0p925>; + vdda-pll-supply = <&vreg_l10a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l7b_3p125>; +}; + +&rpm_requests { + pm660l-regulators { + compatible = "qcom,rpm-pm660l-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + + vdd_l1_l9_l10-supply = <&vreg_s2b_1p05>; + vdd_l2-supply = <&vreg_bob>; + vdd_l3_l5_l7_l8-supply = <&vreg_bob>; + vdd_l4_l6-supply = <&vreg_bob>; + vdd_bob-supply = <&vph_pwr>; + + vreg_s1b_1p125: s1 { + regulator-min-microvolt = <1125000>; + regulator-max-microvolt = <1125000>; + regulator-enable-ramp-delay = <200>; + regulator-ramp-delay = <0>; + }; + + vreg_s2b_1p05: s2 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-enable-ramp-delay = <200>; + regulator-ramp-delay = <0>; + }; + + /* + * At least on Nile's configuration, S3B/S4B (VDD_CX) and + * S5B (VDD_MX) are managed only through RPM Power Domains. + * Trying to set a voltage on the main supply will create + * havoc and freeze the SoC. + * In any case, reference voltages for these regulators are: + * S3B/S4B: 0.870V + * S5B: 0.915V + */ + + /* LDOs */ + vreg_l1b_0p925: l1 { + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <928000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + regulator-allow-set-load; + }; + + vreg_l2b_2p95: l2 { + /* + * This regulator supports 1.648 - 3.104V on this board + * but we set a max voltage of anything less than 2.7V + * to satisfy a condition in sdhci.c that will disable + * 3.3V SDHCI signaling, which happens to be not really + * supported on the Xperia Nile/Ganges platform. + */ + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <2696000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + regulator-allow-set-load; + }; + + vreg_l3b_3p0: l3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + regulator-min-microamp = <200>; + regulator-max-microamp = <600000>; + regulator-system-load = <100000>; + regulator-allow-set-load; + }; + + vreg_l4b_2p95: l4 { + regulator-min-microvolt = <2944000>; + regulator-max-microvolt = <2952000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + + regulator-min-microamp = <200>; + regulator-max-microamp = <600000>; + regulator-system-load = <570000>; + regulator-allow-set-load; + }; + + /* + * Downstream specifies a range of 1721-3600mV, + * but the only assigned consumers are SDHCI2 VMMC + * and Coresight QPDI that both request pinned 2.95V. + * Tighten the range to 1.8-3.328 (closest to 3.3) to + * make the mmc driver happy. + */ + vreg_l5b_2p95: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3328000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + regulator-allow-set-load; + regulator-system-load = <800000>; + }; + + vreg_l6b_3p3: l6 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <3312000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + }; + + vreg_l7b_3p125: l7 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <3128000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + }; + + vreg_l8b_3p3: l8 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3400000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + }; + + /* L9B (870mV) is currently unused */ + /* L10B (915mV) is currently unused */ + + vreg_bob: bob { + regulator-min-microvolt = <3304000>; + regulator-max-microvolt = <3624000>; + regulator-enable-ramp-delay = <500>; + regulator-ramp-delay = <0>; + }; + }; + + pm660-regulators { + compatible = "qcom,rpm-pm660-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + + vdd_l1_l6_l7-supply = <&vreg_s5a_1p35>; + vdd_l2_l3-supply = <&vreg_s2b_1p05>; + vdd_l5-supply = <&vreg_s2b_1p05>; + vdd_l8_l9_l10_l11_l12_l13_l14-supply = <&vreg_s4a_2p04>; + vdd_l15_l16_l17_l18_l19-supply = <&vreg_bob>; + + /* + * S1A (FTAPC0), S2A (FTAPC1), S3A (HFAPC1) are managed + * by the Core Power Reduction hardened (CPRh) and the + * Operating State Manager (OSM) HW automatically. + */ + + vreg_s4a_2p04: s4 { + regulator-min-microvolt = <2040000>; + regulator-max-microvolt = <2040000>; + regulator-enable-ramp-delay = <200>; + regulator-ramp-delay = <0>; + regulator-always-on; + }; + + vreg_s5a_1p35: s5 { + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1350000>; + regulator-enable-ramp-delay = <200>; + regulator-ramp-delay = <0>; + }; + + vreg_s6a_0p87: s6 { + regulator-min-microvolt = <504000>; + regulator-max-microvolt = <992000>; + regulator-enable-ramp-delay = <150>; + regulator-ramp-delay = <0>; + }; + + /* LDOs */ + vreg_l1a_1p225: l1 { + regulator-min-microvolt = <1226000>; + regulator-max-microvolt = <1250000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + regulator-allow-set-load; + }; + + vreg_l2a_1p0: l2 { + regulator-min-microvolt = <944000>; + regulator-max-microvolt = <1008000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + }; + + vreg_l3a_1p0: l3 { + regulator-min-microvolt = <944000>; + regulator-max-microvolt = <1008000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + }; + + vreg_l5a_0p848: l5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <952000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + }; + + vreg_l6a_1p3: l6 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1368000>; + regulator-allow-set-load; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + }; + + vreg_l7a_1p2: l7 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + }; + + vreg_l8a_1p8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + regulator-system-load = <325000>; + regulator-allow-set-load; + }; + + vreg_l9a_1p8: l9 { + regulator-min-microvolt = <1804000>; + regulator-max-microvolt = <1896000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + regulator-allow-set-load; + }; + + vreg_l10a_1p8: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1944000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + regulator-allow-set-load; + }; + + vreg_l11a_1p8: l11 { + regulator-min-microvolt = <1784000>; + regulator-max-microvolt = <1944000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + }; + + vreg_l12a_1p8: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1944000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + }; + + /* This gives power to the LPDDR4: never turn it off! */ + vreg_l13a_1p8: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1944000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + regulator-boot-on; + regulator-always-on; + }; + + vreg_l14a_1p8: l14 { + regulator-min-microvolt = <1710000>; + regulator-max-microvolt = <1904000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + }; + + vreg_l15a_1p8: l15 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <2952000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + }; + + /* L16A (2.70V) is unused */ + + vreg_l17a_1p8: l17 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <2952000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + }; + + vreg_l18a_1v8: l18 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <10>; + regulator-min-microamp = <200>; + regulator-max-microamp = <50000>; + regulator-system-load = <10000>; + regulator-allow-set-load; + }; + + vreg_l19a_3p3: l19 { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3400000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + regulator-allow-set-load; + }; + }; +}; + +&sdc2_state_on { + sd-cd { + pins = "gpio54"; + bias-pull-up; + drive-strength = <2>; + }; +}; + +&sdc2_state_off { + sd-cd { + pins = "gpio54"; + bias-disable; + drive-strength = <2>; + }; +}; + +&sdhc_1 { + status = "okay"; + supports-cqe; + + /* SoMC Nile platform's eMMC doesn't support HS200 mode */ + mmc-ddr-1_8v; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + + vmmc-supply = <&vreg_l4b_2p95>; + vqmmc-supply = <&vreg_l8a_1p8>; +}; + +&sdhc_2 { + status = "okay"; + + vmmc-supply = <&vreg_l5b_2p95>; + vqmmc-supply = <&vreg_l2b_2p95>; +}; + +&tlmm { + gpio-reserved-ranges = <8 4>; + + ts_int_active: ts-int-active { + pins = "gpio45"; + drive-strength = <8>; + bias-pull-up; + }; + + ts_lcd_id_active: ts-lcd-id-active { + pins = "gpio56"; + drive-strength = <8>; + bias-disable; + }; + + imx300_vana_default: imx300-vana-default { + pins = "gpio50"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + + imx219_vana_default: imx219-vana-default { + pins = "gpio51"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + + cam_vdig_default: cam-vdig-default { + pins = "gpio52"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + dr_mode = "peripheral"; + extcon = <&extcon_usb>; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi new file mode 100644 index 000000000..243054926 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -0,0 +1,2544 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio + * Copyright (c) 2020, AngeloGioacchino Del Regno + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + aliases { + mmc1 = &sdhc_1; + mmc2 = &sdhc_2; + }; + + chosen { }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + clock-output-names = "xo_board"; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32764>; + clock-output-names = "sleep_clk"; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x100>; + enable-method = "psci"; + cpu-idle-states = <&PERF_CPU_SLEEP_0 + &PERF_CPU_SLEEP_1 + &PERF_CLUSTER_SLEEP_0 + &PERF_CLUSTER_SLEEP_1 + &PERF_CLUSTER_SLEEP_2>; + capacity-dmips-mhz = <1126>; + #cooling-cells = <2>; + next-level-cache = <&L2_1>; + L2_1: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + CPU1: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x101>; + enable-method = "psci"; + cpu-idle-states = <&PERF_CPU_SLEEP_0 + &PERF_CPU_SLEEP_1 + &PERF_CLUSTER_SLEEP_0 + &PERF_CLUSTER_SLEEP_1 + &PERF_CLUSTER_SLEEP_2>; + capacity-dmips-mhz = <1126>; + #cooling-cells = <2>; + next-level-cache = <&L2_1>; + }; + + CPU2: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x102>; + enable-method = "psci"; + cpu-idle-states = <&PERF_CPU_SLEEP_0 + &PERF_CPU_SLEEP_1 + &PERF_CLUSTER_SLEEP_0 + &PERF_CLUSTER_SLEEP_1 + &PERF_CLUSTER_SLEEP_2>; + capacity-dmips-mhz = <1126>; + #cooling-cells = <2>; + next-level-cache = <&L2_1>; + }; + + CPU3: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x103>; + enable-method = "psci"; + cpu-idle-states = <&PERF_CPU_SLEEP_0 + &PERF_CPU_SLEEP_1 + &PERF_CLUSTER_SLEEP_0 + &PERF_CLUSTER_SLEEP_1 + &PERF_CLUSTER_SLEEP_2>; + capacity-dmips-mhz = <1126>; + #cooling-cells = <2>; + next-level-cache = <&L2_1>; + }; + + CPU4: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x0>; + enable-method = "psci"; + cpu-idle-states = <&PWR_CPU_SLEEP_0 + &PWR_CPU_SLEEP_1 + &PWR_CLUSTER_SLEEP_0 + &PWR_CLUSTER_SLEEP_1 + &PWR_CLUSTER_SLEEP_2>; + capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + CPU5: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x1>; + enable-method = "psci"; + cpu-idle-states = <&PWR_CPU_SLEEP_0 + &PWR_CPU_SLEEP_1 + &PWR_CLUSTER_SLEEP_0 + &PWR_CLUSTER_SLEEP_1 + &PWR_CLUSTER_SLEEP_2>; + capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; + next-level-cache = <&L2_0>; + }; + + CPU6: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x2>; + enable-method = "psci"; + cpu-idle-states = <&PWR_CPU_SLEEP_0 + &PWR_CPU_SLEEP_1 + &PWR_CLUSTER_SLEEP_0 + &PWR_CLUSTER_SLEEP_1 + &PWR_CLUSTER_SLEEP_2>; + capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; + next-level-cache = <&L2_0>; + }; + + CPU7: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x3>; + enable-method = "psci"; + cpu-idle-states = <&PWR_CPU_SLEEP_0 + &PWR_CPU_SLEEP_1 + &PWR_CLUSTER_SLEEP_0 + &PWR_CLUSTER_SLEEP_1 + &PWR_CLUSTER_SLEEP_2>; + capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; + next-level-cache = <&L2_0>; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU4>; + }; + + core1 { + cpu = <&CPU5>; + }; + + core2 { + cpu = <&CPU6>; + }; + + core3 { + cpu = <&CPU7>; + }; + }; + + cluster1 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + PWR_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "pwr-retention"; + arm,psci-suspend-param = <0x40000002>; + entry-latency-us = <338>; + exit-latency-us = <423>; + min-residency-us = <200>; + }; + + PWR_CPU_SLEEP_1: cpu-sleep-0-1 { + compatible = "arm,idle-state"; + idle-state-name = "pwr-power-collapse"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <515>; + exit-latency-us = <1821>; + min-residency-us = <1000>; + local-timer-stop; + }; + + PERF_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "perf-retention"; + arm,psci-suspend-param = <0x40000002>; + entry-latency-us = <154>; + exit-latency-us = <87>; + min-residency-us = <200>; + }; + + PERF_CPU_SLEEP_1: cpu-sleep-1-1 { + compatible = "arm,idle-state"; + idle-state-name = "perf-power-collapse"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <262>; + exit-latency-us = <301>; + min-residency-us = <1000>; + local-timer-stop; + }; + + PWR_CLUSTER_SLEEP_0: cluster-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "pwr-cluster-dynamic-retention"; + arm,psci-suspend-param = <0x400000F2>; + entry-latency-us = <284>; + exit-latency-us = <384>; + min-residency-us = <9987>; + local-timer-stop; + }; + + PWR_CLUSTER_SLEEP_1: cluster-sleep-0-1 { + compatible = "arm,idle-state"; + idle-state-name = "pwr-cluster-retention"; + arm,psci-suspend-param = <0x400000F3>; + entry-latency-us = <338>; + exit-latency-us = <423>; + min-residency-us = <9987>; + local-timer-stop; + }; + + PWR_CLUSTER_SLEEP_2: cluster-sleep-0-2 { + compatible = "arm,idle-state"; + idle-state-name = "pwr-cluster-retention"; + arm,psci-suspend-param = <0x400000F4>; + entry-latency-us = <515>; + exit-latency-us = <1821>; + min-residency-us = <9987>; + local-timer-stop; + }; + + PERF_CLUSTER_SLEEP_0: cluster-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "perf-cluster-dynamic-retention"; + arm,psci-suspend-param = <0x400000F2>; + entry-latency-us = <272>; + exit-latency-us = <329>; + min-residency-us = <9987>; + local-timer-stop; + }; + + PERF_CLUSTER_SLEEP_1: cluster-sleep-1-1 { + compatible = "arm,idle-state"; + idle-state-name = "perf-cluster-retention"; + arm,psci-suspend-param = <0x400000F3>; + entry-latency-us = <332>; + exit-latency-us = <368>; + min-residency-us = <9987>; + local-timer-stop; + }; + + PERF_CLUSTER_SLEEP_2: cluster-sleep-1-2 { + compatible = "arm,idle-state"; + idle-state-name = "perf-cluster-retention"; + arm,psci-suspend-param = <0x400000F4>; + entry-latency-us = <545>; + exit-latency-us = <1609>; + min-residency-us = <9987>; + local-timer-stop; + }; + }; + }; + + firmware { + scm { + compatible = "qcom,scm-msm8998", "qcom,scm"; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the reg */ + reg = <0x0 0x80000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = ; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + wlan_msa_guard: wlan-msa-guard@85600000 { + reg = <0x0 0x85600000 0x0 0x100000>; + no-map; + }; + + wlan_msa_mem: wlan-msa-mem@85700000 { + reg = <0x0 0x85700000 0x0 0x100000>; + no-map; + }; + + qhee_code: qhee-code@85800000 { + reg = <0x0 0x85800000 0x0 0x600000>; + no-map; + }; + + rmtfs_mem: memory@85e00000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x85e00000 0x0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + + smem_region: smem-mem@86000000 { + reg = <0 0x86000000 0 0x200000>; + no-map; + }; + + tz_mem: memory@86200000 { + reg = <0x0 0x86200000 0x0 0x3300000>; + no-map; + }; + + mpss_region: mpss@8ac00000 { + reg = <0x0 0x8ac00000 0x0 0x7e00000>; + no-map; + }; + + adsp_region: adsp@92a00000 { + reg = <0x0 0x92a00000 0x0 0x1e00000>; + no-map; + }; + + mba_region: mba@94800000 { + reg = <0x0 0x94800000 0x0 0x200000>; + no-map; + }; + + buffer_mem: tzbuffer@94a00000 { + reg = <0x0 0x94a00000 0x0 0x100000>; + no-map; + }; + + venus_region: venus@9f800000 { + reg = <0x0 0x9f800000 0x0 0x800000>; + no-map; + }; + + adsp_mem: adsp-region@f6000000 { + reg = <0x0 0xf6000000 0x0 0x800000>; + no-map; + }; + + qseecom_mem: qseecom-region@f6800000 { + reg = <0x0 0xf6800000 0x0 0x1400000>; + no-map; + }; + + zap_shader_region: gpu@fed00000 { + compatible = "shared-dma-pool"; + reg = <0x0 0xfed00000 0x0 0xa00000>; + no-map; + }; + }; + + rpm-glink { + compatible = "qcom,glink-rpm"; + + interrupts = ; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + mboxes = <&apcs_glb 0>; + + rpm_requests: rpm-requests { + compatible = "qcom,rpm-sdm660"; + qcom,glink-channels = "rpm_requests"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-sdm660", "qcom,rpmcc"; + #clock-cells = <1>; + }; + + rpmpd: power-controller { + compatible = "qcom,sdm660-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp_ret: opp1 { + opp-level = ; + }; + + rpmpd_opp_ret_plus: opp2 { + opp-level = ; + }; + + rpmpd_opp_min_svs: opp3 { + opp-level = ; + }; + + rpmpd_opp_low_svs: opp4 { + opp-level = ; + }; + + rpmpd_opp_svs: opp5 { + opp-level = ; + }; + + rpmpd_opp_svs_plus: opp6 { + opp-level = ; + }; + + rpmpd_opp_nom: opp7 { + opp-level = ; + }; + + rpmpd_opp_nom_plus: opp8 { + opp-level = ; + }; + + rpmpd_opp_turbo: opp9 { + opp-level = ; + }; + }; + }; + }; + }; + + smem: smem { + compatible = "qcom,smem"; + memory-region = <&smem_region>; + hwlocks = <&tcsr_mutex 3>; + }; + + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + interrupts = ; + mboxes = <&apcs_glb 10>; + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-mpss { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + interrupts = ; + mboxes = <&apcs_glb 14>; + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + compatible = "simple-bus"; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-sdm630"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0x00100000 0x94000>; + + clock-names = "xo", "sleep_clk"; + clocks = <&xo_board>, + <&sleep_clk>; + }; + + rpm_msg_ram: sram@778000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0x00778000 0x7000>; + }; + + qfprom: qfprom@780000 { + compatible = "qcom,sdm630-qfprom", "qcom,qfprom"; + reg = <0x00780000 0x621c>; + #address-cells = <1>; + #size-cells = <1>; + + qusb2_hstx_trim: hstx-trim@240 { + reg = <0x243 0x1>; + bits = <1 3>; + }; + + gpu_speed_bin: gpu-speed-bin@41a0 { + reg = <0x41a2 0x1>; + bits = <5 7>; + }; + }; + + rng: rng@793000 { + compatible = "qcom,prng-ee"; + reg = <0x00793000 0x1000>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; + + bimc: interconnect@1008000 { + compatible = "qcom,sdm660-bimc"; + reg = <0x01008000 0x78000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_BIMC_CLK>, + <&rpmcc RPM_SMD_BIMC_A_CLK>; + }; + + restart@10ac000 { + compatible = "qcom,pshold"; + reg = <0x010ac000 0x4>; + }; + + cnoc: interconnect@1500000 { + compatible = "qcom,sdm660-cnoc"; + reg = <0x01500000 0x10000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_CNOC_CLK>, + <&rpmcc RPM_SMD_CNOC_A_CLK>; + }; + + snoc: interconnect@1626000 { + compatible = "qcom,sdm660-snoc"; + reg = <0x01626000 0x7090>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_SNOC_CLK>, + <&rpmcc RPM_SMD_SNOC_A_CLK>; + }; + + anoc2_smmu: iommu@16c0000 { + compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2"; + reg = <0x016c0000 0x40000>; + + assigned-clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>; + assigned-clock-rates = <1000>; + clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>; + clock-names = "bus"; + #global-interrupts = <2>; + #iommu-cells = <1>; + + interrupts = + , + , + + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + + status = "disabled"; + }; + + a2noc: interconnect@1704000 { + compatible = "qcom,sdm660-a2noc"; + reg = <0x01704000 0xc100>; + #interconnect-cells = <1>; + clock-names = "bus", + "bus_a", + "ipa", + "ufs_axi", + "aggre2_ufs_axi", + "aggre2_usb3_axi", + "cfg_noc_usb2_axi"; + clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>, + <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>, + <&rpmcc RPM_SMD_IPA_CLK>, + <&gcc GCC_UFS_AXI_CLK>, + <&gcc GCC_AGGRE2_UFS_AXI_CLK>, + <&gcc GCC_AGGRE2_USB3_AXI_CLK>, + <&gcc GCC_CFG_NOC_USB2_AXI_CLK>; + }; + + mnoc: interconnect@1745000 { + compatible = "qcom,sdm660-mnoc"; + reg = <0x01745000 0xA010>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a", "iface"; + clocks = <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK>, + <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK_A>, + <&mmcc AHB_CLK_SRC>; + }; + + tsens: thermal-sensor@10ae000 { + compatible = "qcom,sdm630-tsens", "qcom,tsens-v2"; + reg = <0x010ae000 0x1000>, /* TM */ + <0x010ad000 0x1000>; /* SROT */ + #qcom,sensors = <12>; + interrupts = , + ; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x01f40000 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr_regs_1: syscon@1f60000 { + compatible = "qcom,sdm630-tcsr", "syscon"; + reg = <0x01f60000 0x20000>; + }; + + tlmm: pinctrl@3100000 { + compatible = "qcom,sdm630-pinctrl"; + reg = <0x03100000 0x400000>, + <0x03500000 0x400000>, + <0x03900000 0x400000>; + reg-names = "south", "center", "north"; + interrupts = ; + gpio-controller; + gpio-ranges = <&tlmm 0 0 114>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + blsp1_uart1_default: blsp1-uart1-default { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_uart1_sleep: blsp1-uart1-sleep { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_uart2_default: blsp1-uart2-default { + pins = "gpio4", "gpio5"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_uart1_default: blsp2-uart1-active { + tx-rts { + pins = "gpio16", "gpio19"; + function = "blsp_uart5"; + drive-strength = <2>; + bias-disable; + }; + + rx { + /* + * Avoid garbage data while BT module + * is powered off or not driving signal + */ + pins = "gpio17"; + function = "blsp_uart5"; + drive-strength = <2>; + bias-pull-up; + }; + + cts { + /* Match the pull of the BT module */ + pins = "gpio18"; + function = "blsp_uart5"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + blsp2_uart1_sleep: blsp2-uart1-sleep { + tx { + pins = "gpio16"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + rx-cts-rts { + pins = "gpio17", "gpio18", "gpio19"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + + i2c1_default: i2c1-default { + pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; + drive-strength = <2>; + bias-disable; + }; + + i2c1_sleep: i2c1-sleep { + pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; + drive-strength = <2>; + bias-pull-up; + }; + + i2c2_default: i2c2-default { + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; + drive-strength = <2>; + bias-disable; + }; + + i2c2_sleep: i2c2-sleep { + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; + drive-strength = <2>; + bias-pull-up; + }; + + i2c3_default: i2c3-default { + pins = "gpio10", "gpio11"; + function = "blsp_i2c3"; + drive-strength = <2>; + bias-disable; + }; + + i2c3_sleep: i2c3-sleep { + pins = "gpio10", "gpio11"; + function = "blsp_i2c3"; + drive-strength = <2>; + bias-pull-up; + }; + + i2c4_default: i2c4-default { + pins = "gpio14", "gpio15"; + function = "blsp_i2c4"; + drive-strength = <2>; + bias-disable; + }; + + i2c4_sleep: i2c4-sleep { + pins = "gpio14", "gpio15"; + function = "blsp_i2c4"; + drive-strength = <2>; + bias-pull-up; + }; + + i2c5_default: i2c5-default { + pins = "gpio18", "gpio19"; + function = "blsp_i2c5"; + drive-strength = <2>; + bias-disable; + }; + + i2c5_sleep: i2c5-sleep { + pins = "gpio18", "gpio19"; + function = "blsp_i2c5"; + drive-strength = <2>; + bias-pull-up; + }; + + i2c6_default: i2c6-default { + pins = "gpio22", "gpio23"; + function = "blsp_i2c6"; + drive-strength = <2>; + bias-disable; + }; + + i2c6_sleep: i2c6-sleep { + pins = "gpio22", "gpio23"; + function = "blsp_i2c6"; + drive-strength = <2>; + bias-pull-up; + }; + + i2c7_default: i2c7-default { + pins = "gpio26", "gpio27"; + function = "blsp_i2c7"; + drive-strength = <2>; + bias-disable; + }; + + i2c7_sleep: i2c7-sleep { + pins = "gpio26", "gpio27"; + function = "blsp_i2c7"; + drive-strength = <2>; + bias-pull-up; + }; + + i2c8_default: i2c8-default { + pins = "gpio30", "gpio31"; + function = "blsp_i2c8"; + drive-strength = <2>; + bias-disable; + }; + + i2c8_sleep: i2c8-sleep { + pins = "gpio30", "gpio31"; + function = "blsp_i2c8"; + drive-strength = <2>; + bias-pull-up; + }; + + cci0_default: cci0_default { + pinmux { + pins = "gpio36","gpio37"; + function = "cci_i2c"; + }; + + pinconf { + pins = "gpio36","gpio37"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + cci1_default: cci1_default { + pinmux { + pins = "gpio38","gpio39"; + function = "cci_i2c"; + }; + + pinconf { + pins = "gpio38","gpio39"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + sdc1_state_on: sdc1-on { + clk { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <10>; + }; + + rclk { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc1_state_off: sdc1-off { + clk { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + + rclk { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc2_state_on: sdc2-on { + clk { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + }; + + sdc2_state_off: sdc2-off { + clk { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + }; + }; + + adreno_gpu: gpu@5000000 { + compatible = "qcom,adreno-508.0", "qcom,adreno"; + + reg = <0x05000000 0x40000>; + reg-names = "kgsl_3d0_reg_memory"; + + interrupts = <0 300 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_GPU_CFG_AHB_CLK>, + <&gpucc GPUCC_RBBMTIMER_CLK>, + <&gcc GCC_BIMC_GFX_CLK>, + <&gcc GCC_GPU_BIMC_GFX_CLK>, + <&gpucc GPUCC_RBCPR_CLK>, + <&gpucc GPUCC_GFX3D_CLK>; + + clock-names = "iface", + "rbbmtimer", + "mem", + "mem_iface", + "rbcpr", + "core"; + + power-domains = <&rpmpd SDM660_VDDMX>; + iommus = <&kgsl_smmu 0>; + + nvmem-cells = <&gpu_speed_bin>; + nvmem-cell-names = "speed_bin"; + + interconnects = <&bimc MASTER_OXILI &bimc SLAVE_EBI>; + interconnect-names = "gfx-mem"; + + operating-points-v2 = <&gpu_sdm630_opp_table>; + + status = "disabled"; + + gpu_sdm630_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-775000000 { + opp-hz = /bits/ 64 <775000000>; + opp-level = ; + opp-peak-kBps = <5412000>; + opp-supported-hw = <0xA2>; + }; + opp-647000000 { + opp-hz = /bits/ 64 <647000000>; + opp-level = ; + opp-peak-kBps = <4068000>; + opp-supported-hw = <0xFF>; + }; + opp-588000000 { + opp-hz = /bits/ 64 <588000000>; + opp-level = ; + opp-peak-kBps = <3072000>; + opp-supported-hw = <0xFF>; + }; + opp-465000000 { + opp-hz = /bits/ 64 <465000000>; + opp-level = ; + opp-peak-kBps = <2724000>; + opp-supported-hw = <0xFF>; + }; + opp-370000000 { + opp-hz = /bits/ 64 <370000000>; + opp-level = ; + opp-peak-kBps = <2188000>; + opp-supported-hw = <0xFF>; + }; + opp-240000000 { + opp-hz = /bits/ 64 <240000000>; + opp-level = ; + opp-peak-kBps = <1648000>; + opp-supported-hw = <0xFF>; + }; + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + opp-level = ; + opp-peak-kBps = <1200000>; + opp-supported-hw = <0xFF>; + }; + }; + }; + + kgsl_smmu: iommu@5040000 { + compatible = "qcom,sdm630-smmu-v2", + "qcom,adreno-smmu", "qcom,smmu-v2"; + reg = <0x05040000 0x10000>; + + /* + * GX GDSC parent is CX. We need to bring up CX for SMMU + * but we need both up for Adreno. On the other hand, we + * need to manage the GX rpmpd domain in the adreno driver. + * Enable CX/GX GDSCs here so that we can manage just the GX + * RPM Power Domain in the Adreno driver. + */ + power-domains = <&gpucc GPU_GX_GDSC>; + clocks = <&gcc GCC_GPU_CFG_AHB_CLK>, + <&gcc GCC_BIMC_GFX_CLK>, + <&gcc GCC_GPU_BIMC_GFX_CLK>; + clock-names = "iface", "mem", "mem_iface"; + #global-interrupts = <2>; + #iommu-cells = <1>; + + interrupts = + , + , + + , + , + , + , + , + , + , + ; + + status = "disabled"; + }; + + gpucc: clock-controller@5065000 { + compatible = "qcom,gpucc-sdm630"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0x05065000 0x9038>; + + clocks = <&xo_board>, + <&gcc GCC_GPU_GPLL0_CLK>, + <&gcc GCC_GPU_GPLL0_DIV_CLK>; + clock-names = "xo", + "gcc_gpu_gpll0_clk", + "gcc_gpu_gpll0_div_clk"; + status = "disabled"; + }; + + lpass_smmu: iommu@5100000 { + compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2"; + reg = <0x05100000 0x40000>; + #iommu-cells = <1>; + + #global-interrupts = <2>; + interrupts = + , + , + + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + + status = "disabled"; + }; + + sram@290000 { + compatible = "qcom,rpm-stats"; + reg = <0x00290000 0x10000>; + }; + + spmi_bus: spmi@800f000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0800f000 0x1000>, + <0x08400000 0x1000000>, + <0x09400000 0x1000000>, + <0x0a400000 0x220000>, + <0x0800a000 0x3000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = ; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + cell-index = <0>; + }; + + usb3: usb@a8f8800 { + compatible = "qcom,sdm660-dwc3", "qcom,dwc3"; + reg = <0x0a8f8800 0x400>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_AXI_CLK>, + <&gcc GCC_USB30_MASTER_CLK>, + <&gcc GCC_AGGRE2_USB3_AXI_CLK>, + <&gcc GCC_USB30_SLEEP_CLK>, + <&gcc GCC_USB30_MOCK_UTMI_CLK>, + <&rpmcc RPM_SMD_AGGR2_NOC_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "bus"; + + assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_MASTER_CLK>, + <&rpmcc RPM_SMD_AGGR2_NOC_CLK>; + assigned-clock-rates = <19200000>, <120000000>, + <19200000>; + + interrupts = , + ; + interrupt-names = "hs_phy_irq", "ss_phy_irq"; + + power-domains = <&gcc USB_30_GDSC>; + qcom,select-utmi-as-pipe-clk; + + resets = <&gcc GCC_USB_30_BCR>; + + usb3_dwc3: usb@a800000 { + compatible = "snps,dwc3"; + reg = <0x0a800000 0xc8d0>; + interrupts = ; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + + /* + * SDM630 technically supports USB3 but I + * haven't seen any devices making use of it. + */ + maximum-speed = "high-speed"; + phys = <&qusb2phy0>; + phy-names = "usb2-phy"; + snps,hird-threshold = /bits/ 8 <0>; + }; + }; + + qusb2phy0: phy@c012000 { + compatible = "qcom,sdm660-qusb2-phy"; + reg = <0x0c012000 0x180>; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_RX0_USB2_CLKREF_CLK>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + nvmem-cells = <&qusb2_hstx_trim>; + status = "disabled"; + }; + + qusb2phy1: phy@c014000 { + compatible = "qcom,sdm660-qusb2-phy"; + reg = <0x0c014000 0x180>; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_RX1_USB2_CLKREF_CLK>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; + nvmem-cells = <&qusb2_hstx_trim>; + status = "disabled"; + }; + + sdhc_2: mmc@c084000 { + compatible = "qcom,sdm630-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x0c084000 0x1000>; + reg-names = "hc"; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + bus-width = <4>; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&xo_board>; + clock-names = "iface", "core", "xo"; + + + interconnects = <&a2noc 3 &a2noc 10>, + <&gnoc 0 &cnoc 28>; + interconnect-names = "sdhc-ddr","cpu-sdhc"; + operating-points-v2 = <&sdhc2_opp_table>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_state_on>; + pinctrl-1 = <&sdc2_state_off>; + power-domains = <&rpmpd SDM660_VDDCX>; + + status = "disabled"; + + sdhc2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmpd_opp_low_svs>; + opp-peak-kBps = <200000 140000>; + opp-avg-kBps = <130718 133320>; + }; + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmpd_opp_svs>; + opp-peak-kBps = <250000 160000>; + opp-avg-kBps = <196078 150000>; + }; + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmpd_opp_nom>; + opp-peak-kBps = <4096000 4096000>; + opp-avg-kBps = <1338562 1338562>; + }; + }; + }; + + sdhc_1: mmc@c0c4000 { + compatible = "qcom,sdm630-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x0c0c4000 0x1000>, + <0x0c0c5000 0x1000>, + <0x0c0c8000 0x8000>; + reg-names = "hc", "cqhci", "ice"; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&xo_board>, + <&gcc GCC_SDCC1_ICE_CORE_CLK>; + clock-names = "iface", "core", "xo", "ice"; + + interconnects = <&a2noc 2 &a2noc 10>, + <&gnoc 0 &cnoc 27>; + interconnect-names = "sdhc-ddr", "cpu-sdhc"; + operating-points-v2 = <&sdhc1_opp_table>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_state_on>; + pinctrl-1 = <&sdc1_state_off>; + power-domains = <&rpmpd SDM660_VDDCX>; + + bus-width = <8>; + non-removable; + + status = "disabled"; + + sdhc1_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmpd_opp_low_svs>; + opp-peak-kBps = <200000 140000>; + opp-avg-kBps = <130718 133320>; + }; + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmpd_opp_svs>; + opp-peak-kBps = <250000 160000>; + opp-avg-kBps = <196078 150000>; + }; + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + required-opps = <&rpmpd_opp_nom>; + opp-peak-kBps = <4096000 4096000>; + opp-avg-kBps = <1338562 1338562>; + }; + }; + }; + + usb2: usb@c2f8800 { + compatible = "qcom,sdm660-dwc3", "qcom,dwc3"; + reg = <0x0c2f8800 0x400>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB2_AXI_CLK>, + <&gcc GCC_USB20_MASTER_CLK>, + <&gcc GCC_USB20_MOCK_UTMI_CLK>, + <&gcc GCC_USB20_SLEEP_CLK>; + clock-names = "cfg_noc", "core", + "mock_utmi", "sleep"; + + assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>, + <&gcc GCC_USB20_MASTER_CLK>; + assigned-clock-rates = <19200000>, <60000000>; + + interrupts = ; + interrupt-names = "hs_phy_irq"; + + qcom,select-utmi-as-pipe-clk; + + resets = <&gcc GCC_USB_20_BCR>; + + usb2_dwc3: usb@c200000 { + compatible = "snps,dwc3"; + reg = <0x0c200000 0xc8d0>; + interrupts = ; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + + /* This is the HS-only host */ + maximum-speed = "high-speed"; + phys = <&qusb2phy1>; + phy-names = "usb2-phy"; + snps,hird-threshold = /bits/ 8 <0>; + }; + }; + + mmcc: clock-controller@c8c0000 { + compatible = "qcom,mmcc-sdm630"; + reg = <0x0c8c0000 0x40000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clock-names = "xo", + "sleep_clk", + "gpll0", + "gpll0_div", + "dsi0pll", + "dsi0pllbyte", + "dsi1pll", + "dsi1pllbyte", + "dp_link_2x_clk_divsel_five", + "dp_vco_divided_clk_src_mux"; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&sleep_clk>, + <&gcc GCC_MMSS_GPLL0_CLK>, + <&gcc GCC_MMSS_GPLL0_DIV_CLK>, + <&dsi0_phy 1>, + <&dsi0_phy 0>, + <0>, + <0>, + <0>, + <0>; + }; + + dsi_opp_table: opp-table-dsi { + compatible = "operating-points-v2"; + + opp-131250000 { + opp-hz = /bits/ 64 <131250000>; + required-opps = <&rpmpd_opp_svs>; + }; + + opp-210000000 { + opp-hz = /bits/ 64 <210000000>; + required-opps = <&rpmpd_opp_svs_plus>; + }; + + opp-262500000 { + opp-hz = /bits/ 64 <262500000>; + required-opps = <&rpmpd_opp_nom>; + }; + }; + + mdss: mdss@c900000 { + compatible = "qcom,mdss"; + reg = <0x0c900000 0x1000>, + <0x0c9b0000 0x1040>; + reg-names = "mdss_phys", "vbif_phys"; + + power-domains = <&mmcc MDSS_GDSC>; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_VSYNC_CLK>, + <&mmcc MDSS_MDP_CLK>; + clock-names = "iface", + "bus", + "vsync", + "core"; + + interrupts = ; + + interrupt-controller; + #interrupt-cells = <1>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + mdp: mdp@c901000 { + compatible = "qcom,mdp5"; + reg = <0x0c901000 0x89000>; + reg-names = "mdp_phys"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + assigned-clocks = <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_VSYNC_CLK>; + assigned-clock-rates = <300000000>, + <19200000>; + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "core", + "vsync"; + + interconnects = <&mnoc 2 &bimc 5>, + <&mnoc 3 &bimc 5>, + <&gnoc 0 &mnoc 17>; + interconnect-names = "mdp0-mem", + "mdp1-mem", + "rotator-mem"; + iommus = <&mmss_smmu 0>; + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmpd SDM660_VDDCX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdp5_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-150000000 { + opp-hz = /bits/ 64 <150000000>; + opp-peak-kBps = <320000 320000 76800>; + required-opps = <&rpmpd_opp_low_svs>; + }; + opp-275000000 { + opp-hz = /bits/ 64 <275000000>; + opp-peak-kBps = <6400000 6400000 160000>; + required-opps = <&rpmpd_opp_svs>; + }; + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-peak-kBps = <6400000 6400000 190000>; + required-opps = <&rpmpd_opp_svs_plus>; + }; + opp-330000000 { + opp-hz = /bits/ 64 <330000000>; + opp-peak-kBps = <6400000 6400000 240000>; + required-opps = <&rpmpd_opp_nom>; + }; + opp-412500000 { + opp-hz = /bits/ 64 <412500000>; + opp-peak-kBps = <6400000 6400000 320000>; + required-opps = <&rpmpd_opp_turbo>; + }; + }; + }; + + dsi0: dsi@c994000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0x0c994000 0x400>; + reg-names = "dsi_ctrl"; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmpd SDM660_VDDCX>; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + assigned-clocks = <&mmcc BYTE0_CLK_SRC>, + <&mmcc PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi0_phy 0>, + <&dsi0_phy 1>; + + clocks = <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_BYTE0_CLK>, + <&mmcc MDSS_BYTE0_INTF_CLK>, + <&mmcc MNOC_AHB_CLK>, + <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MISC_AHB_CLK>, + <&mmcc MDSS_PCLK0_CLK>, + <&mmcc MDSS_ESC0_CLK>; + clock-names = "mdp_core", + "byte", + "byte_intf", + "mnoc", + "iface", + "bus", + "core_mmss", + "pixel", + "core"; + + phys = <&dsi0_phy>; + phy-names = "dsi"; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&mdp5_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + }; + + dsi0_phy: dsi-phy@c994400 { + compatible = "qcom,dsi-phy-14nm-660"; + reg = <0x0c994400 0x100>, + <0x0c994500 0x300>, + <0x0c994800 0x188>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>; + clock-names = "iface", "ref"; + status = "disabled"; + }; + }; + + blsp1_dma: dma-controller@c144000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x0c144000 0x1f000>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + num-channels = <18>; + qcom,num-ees = <4>; + }; + + blsp1_uart1: serial@c16f000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x0c16f000 0x200>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 0>, <&blsp1_dma 1>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_uart1_default>; + pinctrl-1 = <&blsp1_uart1_sleep>; + status = "disabled"; + }; + + blsp1_uart2: serial@c170000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x0c170000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 2>, <&blsp1_dma 3>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_uart2_default>; + status = "disabled"; + }; + + blsp_i2c1: i2c@c175000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c175000 0x600>; + interrupts = ; + + clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + dmas = <&blsp1_dma 4>, <&blsp1_dma 5>; + dma-names = "tx", "rx"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c1_default>; + pinctrl-1 = <&i2c1_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c2: i2c@c176000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c176000 0x600>; + interrupts = ; + + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + dmas = <&blsp1_dma 6>, <&blsp1_dma 7>; + dma-names = "tx", "rx"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c2_default>; + pinctrl-1 = <&i2c2_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c3: i2c@c177000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c177000 0x600>; + interrupts = ; + + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + dmas = <&blsp1_dma 8>, <&blsp1_dma 9>; + dma-names = "tx", "rx"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c3_default>; + pinctrl-1 = <&i2c3_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c4: i2c@c178000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c178000 0x600>; + interrupts = ; + + clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + dmas = <&blsp1_dma 10>, <&blsp1_dma 11>; + dma-names = "tx", "rx"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c4_default>; + pinctrl-1 = <&i2c4_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp2_dma: dma-controller@c184000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x0c184000 0x1f000>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + num-channels = <18>; + qcom,num-ees = <4>; + }; + + blsp2_uart1: serial@c1af000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x0c1af000 0x200>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_UART1_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp2_dma 0>, <&blsp2_dma 1>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_uart1_default>; + pinctrl-1 = <&blsp2_uart1_sleep>; + status = "disabled"; + }; + + blsp_i2c5: i2c@c1b5000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c1b5000 0x600>; + interrupts = ; + + clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + dmas = <&blsp2_dma 4>, <&blsp2_dma 5>; + dma-names = "tx", "rx"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c5_default>; + pinctrl-1 = <&i2c5_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c6: i2c@c1b6000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c1b6000 0x600>; + interrupts = ; + + clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + dmas = <&blsp2_dma 6>, <&blsp2_dma 7>; + dma-names = "tx", "rx"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c6_default>; + pinctrl-1 = <&i2c6_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c7: i2c@c1b7000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c1b7000 0x600>; + interrupts = ; + + clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + dmas = <&blsp2_dma 8>, <&blsp2_dma 9>; + dma-names = "tx", "rx"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c7_default>; + pinctrl-1 = <&i2c7_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c8: i2c@c1b8000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c1b8000 0x600>; + interrupts = ; + + clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + dmas = <&blsp2_dma 10>, <&blsp2_dma 11>; + dma-names = "tx", "rx"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c8_default>; + pinctrl-1 = <&i2c8_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + sram@146bf000 { + compatible = "qcom,sdm630-imem", "syscon", "simple-mfd"; + reg = <0x146bf000 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0 0x146bf000 0x1000>; + + pil-reloc@94c { + compatible = "qcom,pil-reloc-info"; + reg = <0x94c 0xc8>; + }; + }; + + camss: camss@ca00020 { + compatible = "qcom,sdm660-camss"; + reg = <0x0ca00020 0x10>, + <0x0ca30000 0x100>, + <0x0ca30400 0x100>, + <0x0ca30800 0x100>, + <0x0ca30c00 0x100>, + <0x0c824000 0x1000>, + <0x0ca00120 0x4>, + <0x0c825000 0x1000>, + <0x0ca00124 0x4>, + <0x0c826000 0x1000>, + <0x0ca00128 0x4>, + <0x0ca31000 0x500>, + <0x0ca10000 0x1000>, + <0x0ca14000 0x1000>; + reg-names = "csi_clk_mux", + "csid0", + "csid1", + "csid2", + "csid3", + "csiphy0", + "csiphy0_clk_mux", + "csiphy1", + "csiphy1_clk_mux", + "csiphy2", + "csiphy2_clk_mux", + "ispif", + "vfe0", + "vfe1"; + interrupts = , + , + , + , + , + , + , + , + , + ; + interrupt-names = "csid0", + "csid1", + "csid2", + "csid3", + "csiphy0", + "csiphy1", + "csiphy2", + "ispif", + "vfe0", + "vfe1"; + clocks = <&mmcc CAMSS_AHB_CLK>, + <&mmcc CAMSS_CPHY_CSID0_CLK>, + <&mmcc CAMSS_CPHY_CSID1_CLK>, + <&mmcc CAMSS_CPHY_CSID2_CLK>, + <&mmcc CAMSS_CPHY_CSID3_CLK>, + <&mmcc CAMSS_CSI0_AHB_CLK>, + <&mmcc CAMSS_CSI0_CLK>, + <&mmcc CAMSS_CPHY_CSID0_CLK>, + <&mmcc CAMSS_CSI0PIX_CLK>, + <&mmcc CAMSS_CSI0RDI_CLK>, + <&mmcc CAMSS_CSI1_AHB_CLK>, + <&mmcc CAMSS_CSI1_CLK>, + <&mmcc CAMSS_CPHY_CSID1_CLK>, + <&mmcc CAMSS_CSI1PIX_CLK>, + <&mmcc CAMSS_CSI1RDI_CLK>, + <&mmcc CAMSS_CSI2_AHB_CLK>, + <&mmcc CAMSS_CSI2_CLK>, + <&mmcc CAMSS_CPHY_CSID2_CLK>, + <&mmcc CAMSS_CSI2PIX_CLK>, + <&mmcc CAMSS_CSI2RDI_CLK>, + <&mmcc CAMSS_CSI3_AHB_CLK>, + <&mmcc CAMSS_CSI3_CLK>, + <&mmcc CAMSS_CPHY_CSID3_CLK>, + <&mmcc CAMSS_CSI3PIX_CLK>, + <&mmcc CAMSS_CSI3RDI_CLK>, + <&mmcc CAMSS_CSI0PHYTIMER_CLK>, + <&mmcc CAMSS_CSI1PHYTIMER_CLK>, + <&mmcc CAMSS_CSI2PHYTIMER_CLK>, + <&mmcc CSIPHY_AHB2CRIF_CLK>, + <&mmcc CAMSS_CSI_VFE0_CLK>, + <&mmcc CAMSS_CSI_VFE1_CLK>, + <&mmcc CAMSS_ISPIF_AHB_CLK>, + <&mmcc THROTTLE_CAMSS_AXI_CLK>, + <&mmcc CAMSS_TOP_AHB_CLK>, + <&mmcc CAMSS_VFE0_AHB_CLK>, + <&mmcc CAMSS_VFE0_CLK>, + <&mmcc CAMSS_VFE0_STREAM_CLK>, + <&mmcc CAMSS_VFE1_AHB_CLK>, + <&mmcc CAMSS_VFE1_CLK>, + <&mmcc CAMSS_VFE1_STREAM_CLK>, + <&mmcc CAMSS_VFE_VBIF_AHB_CLK>, + <&mmcc CAMSS_VFE_VBIF_AXI_CLK>; + clock-names = "ahb", + "cphy_csid0", + "cphy_csid1", + "cphy_csid2", + "cphy_csid3", + "csi0_ahb", + "csi0", + "csi0_phy", + "csi0_pix", + "csi0_rdi", + "csi1_ahb", + "csi1", + "csi1_phy", + "csi1_pix", + "csi1_rdi", + "csi2_ahb", + "csi2", + "csi2_phy", + "csi2_pix", + "csi2_rdi", + "csi3_ahb", + "csi3", + "csi3_phy", + "csi3_pix", + "csi3_rdi", + "csiphy0_timer", + "csiphy1_timer", + "csiphy2_timer", + "csiphy_ahb2crif", + "csi_vfe0", + "csi_vfe1", + "ispif_ahb", + "throttle_axi", + "top_ahb", + "vfe0_ahb", + "vfe0", + "vfe0_stream", + "vfe1_ahb", + "vfe1", + "vfe1_stream", + "vfe_ahb", + "vfe_axi"; + interconnects = <&mnoc 5 &bimc 5>; + interconnect-names = "vfe-mem"; + iommus = <&mmss_smmu 0xc00>, + <&mmss_smmu 0xc01>, + <&mmss_smmu 0xc02>, + <&mmss_smmu 0xc03>; + power-domains = <&mmcc CAMSS_VFE0_GDSC>, + <&mmcc CAMSS_VFE1_GDSC>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + cci: cci@ca0c000 { + compatible = "qcom,msm8996-cci"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0ca0c000 0x1000>; + interrupts = ; + + assigned-clocks = <&mmcc CAMSS_CCI_AHB_CLK>, + <&mmcc CAMSS_CCI_CLK>; + assigned-clock-rates = <80800000>, <37500000>; + clocks = <&mmcc CAMSS_TOP_AHB_CLK>, + <&mmcc CAMSS_CCI_AHB_CLK>, + <&mmcc CAMSS_CCI_CLK>, + <&mmcc CAMSS_AHB_CLK>; + clock-names = "camss_top_ahb", + "cci_ahb", + "cci", + "camss_ahb"; + + pinctrl-names = "default"; + pinctrl-0 = <&cci0_default &cci1_default>; + power-domains = <&mmcc CAMSS_TOP_GDSC>; + status = "disabled"; + + cci_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <400000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <400000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + venus: video-codec@cc00000 { + compatible = "qcom,sdm660-venus"; + reg = <0x0cc00000 0xff000>; + clocks = <&mmcc VIDEO_CORE_CLK>, + <&mmcc VIDEO_AHB_CLK>, + <&mmcc VIDEO_AXI_CLK>, + <&mmcc THROTTLE_VIDEO_AXI_CLK>; + clock-names = "core", "iface", "bus", "bus_throttle"; + interconnects = <&gnoc 0 &mnoc 13>, + <&mnoc 4 &bimc 5>; + interconnect-names = "cpu-cfg", "video-mem"; + interrupts = ; + iommus = <&mmss_smmu 0x400>, + <&mmss_smmu 0x401>, + <&mmss_smmu 0x40a>, + <&mmss_smmu 0x407>, + <&mmss_smmu 0x40e>, + <&mmss_smmu 0x40f>, + <&mmss_smmu 0x408>, + <&mmss_smmu 0x409>, + <&mmss_smmu 0x40b>, + <&mmss_smmu 0x40c>, + <&mmss_smmu 0x40d>, + <&mmss_smmu 0x410>, + <&mmss_smmu 0x421>, + <&mmss_smmu 0x428>, + <&mmss_smmu 0x429>, + <&mmss_smmu 0x42b>, + <&mmss_smmu 0x42c>, + <&mmss_smmu 0x42d>, + <&mmss_smmu 0x411>, + <&mmss_smmu 0x431>; + memory-region = <&venus_region>; + power-domains = <&mmcc VENUS_GDSC>; + status = "disabled"; + + video-decoder { + compatible = "venus-decoder"; + clocks = <&mmcc VIDEO_SUBCORE0_CLK>; + clock-names = "vcodec0_core"; + power-domains = <&mmcc VENUS_CORE0_GDSC>; + }; + + video-encoder { + compatible = "venus-encoder"; + clocks = <&mmcc VIDEO_SUBCORE0_CLK>; + clock-names = "vcodec0_core"; + power-domains = <&mmcc VENUS_CORE0_GDSC>; + }; + }; + + mmss_smmu: iommu@cd00000 { + compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2"; + reg = <0x0cd00000 0x40000>; + + clocks = <&mmcc MNOC_AHB_CLK>, + <&mmcc BIMC_SMMU_AHB_CLK>, + <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK>, + <&mmcc BIMC_SMMU_AXI_CLK>; + clock-names = "iface-mm", "iface-smmu", + "bus-mm", "bus-smmu"; + #global-interrupts = <2>; + #iommu-cells = <1>; + + interrupts = + , + , + + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + + status = "disabled"; + }; + + adsp_pil: remoteproc@15700000 { + compatible = "qcom,sdm660-adsp-pas"; + reg = <0x15700000 0x4040>; + + interrupts-extended = + <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "xo"; + + memory-region = <&adsp_region>; + power-domains = <&rpmpd SDM660_VDDCX>; + power-domain-names = "cx"; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + glink-edge { + interrupts = ; + + label = "lpass"; + mboxes = <&apcs_glb 9>; + qcom,remote-pid = <2>; + + apr { + compatible = "qcom,apr-v2"; + qcom,glink-channels = "apr_audio_svc"; + qcom,domain = ; + #address-cells = <1>; + #size-cells = <0>; + + q6core { + reg = ; + compatible = "qcom,q6core"; + }; + + q6afe: apr-service@4 { + compatible = "qcom,q6afe"; + reg = ; + q6afedai: dais { + compatible = "qcom,q6afe-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + }; + }; + + q6asm: apr-service@7 { + compatible = "qcom,q6asm"; + reg = ; + q6asmdai: dais { + compatible = "qcom,q6asm-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + iommus = <&lpass_smmu 1>; + }; + }; + + q6adm: apr-service@8 { + compatible = "qcom,q6adm"; + reg = ; + q6routing: routing { + compatible = "qcom,q6adm-routing"; + #sound-dai-cells = <0>; + }; + }; + }; + }; + }; + + gnoc: interconnect@17900000 { + compatible = "qcom,sdm660-gnoc"; + reg = <0x17900000 0xe000>; + #interconnect-cells = <1>; + /* + * This one apparently features no clocks, + * so let's not mess with the driver needlessly + */ + clock-names = "bus", "bus_a"; + clocks = <&xo_board>, <&xo_board>; + }; + + apcs_glb: mailbox@17911000 { + compatible = "qcom,sdm660-apcs-hmss-global"; + reg = <0x17911000 0x1000>; + + #mbox-cells = <1>; + }; + + timer@17920000 { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0x17920000 0x1000>; + clock-frequency = <19200000>; + + frame@17921000 { + frame-number = <0>; + interrupts = <0 8 0x4>, + <0 7 0x4>; + reg = <0x17921000 0x1000>, + <0x17922000 0x1000>; + }; + + frame@17923000 { + frame-number = <1>; + interrupts = <0 9 0x4>; + reg = <0x17923000 0x1000>; + status = "disabled"; + }; + + frame@17924000 { + frame-number = <2>; + interrupts = <0 10 0x4>; + reg = <0x17924000 0x1000>; + status = "disabled"; + }; + + frame@17925000 { + frame-number = <3>; + interrupts = <0 11 0x4>; + reg = <0x17925000 0x1000>; + status = "disabled"; + }; + + frame@17926000 { + frame-number = <4>; + interrupts = <0 12 0x4>; + reg = <0x17926000 0x1000>; + status = "disabled"; + }; + + frame@17927000 { + frame-number = <5>; + interrupts = <0 13 0x4>; + reg = <0x17927000 0x1000>; + status = "disabled"; + }; + + frame@17928000 { + frame-number = <6>; + interrupts = <0 14 0x4>; + reg = <0x17928000 0x1000>; + status = "disabled"; + }; + }; + + intc: interrupt-controller@17a00000 { + compatible = "arm,gic-v3"; + reg = <0x17a00000 0x10000>, /* GICD */ + <0x17b00000 0x100000>; /* GICR * 8 */ + #interrupt-cells = <3>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + interrupt-controller; + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x20000>; + interrupts = ; + }; + }; + + sound: sound { + }; + + thermal-zones { + aoss-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 0>; + + trips { + aoss_alert0: trip-point0 { + temperature = <105000>; + hysteresis = <1000>; + type = "hot"; + }; + }; + }; + + cpuss0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 1>; + + trips { + cpuss0_alert0: trip-point0 { + temperature = <125000>; + hysteresis = <1000>; + type = "hot"; + }; + }; + }; + + cpuss1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 2>; + + trips { + cpuss1_alert0: trip-point0 { + temperature = <125000>; + hysteresis = <1000>; + type = "hot"; + }; + }; + }; + + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 3>; + + trips { + cpu0_alert0: trip-point0 { + temperature = <70000>; + hysteresis = <1000>; + type = "passive"; + }; + + cpu0_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 4>; + + trips { + cpu1_alert0: trip-point0 { + temperature = <70000>; + hysteresis = <1000>; + type = "passive"; + }; + + cpu1_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 5>; + + trips { + cpu2_alert0: trip-point0 { + temperature = <70000>; + hysteresis = <1000>; + type = "passive"; + }; + + cpu2_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 6>; + + trips { + cpu3_alert0: trip-point0 { + temperature = <70000>; + hysteresis = <1000>; + type = "passive"; + }; + + cpu3_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + /* + * According to what downstream DTS says, + * the entire power efficient cluster has + * only a single thermal sensor. + */ + + pwr-cluster-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 7>; + + trips { + pwr_cluster_alert0: trip-point0 { + temperature = <70000>; + hysteresis = <1000>; + type = "passive"; + }; + + pwr_cluster_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 8>; + + trips { + gpu_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <1000>; + type = "hot"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; +}; + diff --git a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts new file mode 100644 index 000000000..891e314bc --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts @@ -0,0 +1,183 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Luca Weiss + */ +/dts-v1/; + +#include "sdm632.dtsi" +#include "pm8953.dtsi" + +/ { + model = "Fairphone 3"; + compatible = "fairphone,fp3", "qcom,sdm632"; + chassis-type = "handset"; + qcom,msm-id = <349 0>; + qcom,board-id = <8 0x10000>; + + aliases { + mmc0 = &sdhc_1; + mmc1 = &sdhc_2; + serial0 = &uart_0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-volume-up { + label = "volume_up"; + linux,code = ; + gpios = <&tlmm 85 GPIO_ACTIVE_LOW>; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + }; +}; + +&hsusb_phy { + status = "okay"; + vdd-supply = <&pm8953_l3>; + vdda-pll-supply = <&pm8953_l7>; + vdda-phy-dpdm-supply = <&pm8953_l13>; +}; + +&pm8953_resin { + status = "okay"; + linux,code = ; +}; + +&sdhc_1 { + status = "okay"; + vmmc-supply = <&pm8953_l8>; + vqmmc-supply = <&pm8953_l5>; +}; + +&sdhc_2 { + status = "okay"; + vmmc-supply = <&pm8953_l11>; + vqmmc-supply = <&pm8953_l12>; + + cd-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; +}; + +&rpm_requests { + pm8953-regulators { + compatible = "qcom,rpm-pm8953-regulators"; + + vdd_l1-supply = <&pm8953_s3>; + vdd_l2_l3-supply = <&pm8953_s3>; + vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>; + vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>; + vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>; + + pm8953_s3: s3 { + regulator-min-microvolt = <984000>; + regulator-max-microvolt = <1240000>; + }; + pm8953_s4: s4 { + regulator-min-microvolt = <1036000>; + regulator-max-microvolt = <2040000>; + }; + pm8953_s5: s5 { + regulator-min-microvolt = <1036000>; + regulator-max-microvolt = <2040000>; + }; + + pm8953_l1: l1 { + regulator-min-microvolt = <975000>; + regulator-max-microvolt = <1050000>; + }; + pm8953_l2: l2 { + regulator-min-microvolt = <975000>; + regulator-max-microvolt = <1175000>; + }; + pm8953_l3: l3 { + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <925000>; + }; + pm8953_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8953_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8953_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1900000>; + }; + pm8953_l8: l8 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + }; + pm8953_l9: l9 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + pm8953_l10: l10 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + }; + pm8953_l11: l11 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + pm8953_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + pm8953_l13: l13 { + regulator-min-microvolt = <3125000>; + regulator-max-microvolt = <3125000>; + }; + pm8953_l16: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8953_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + pm8953_l19: l19 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + }; + pm8953_l22: l22 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + pm8953_l23: l23 { + regulator-min-microvolt = <975000>; + regulator-max-microvolt = <1225000>; + }; + }; +}; + +&tlmm { + /* + * 0-3: unused but protected by TZ + * 135-138: fingerprint reader (SPI) + */ + gpio-reserved-ranges = <0 4>, <135 4>; +}; + +&uart_0 { + status = "okay"; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + dr_mode = "peripheral"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm632.dtsi b/arch/arm64/boot/dts/qcom/sdm632.dtsi new file mode 100644 index 000000000..645b9f6a8 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm632.dtsi @@ -0,0 +1,81 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* Copyright (c) 2022, The Linux Foundation. All rights reserved. */ + +#include "msm8953.dtsi" + +/ { + thermal-zones { + /delete-node/cpu1-thermal; + /delete-node/cpu2-thermal; + /delete-node/cpu3-thermal; + + cpu0-thermal { + thermal-sensors = <&tsens0 13>; + + cooling-maps { + map0 { + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu4-thermal { + thermal-sensors = <&tsens0 5>; + }; + + cpu5-thermal { + thermal-sensors = <&tsens0 6>; + }; + + cpu6-thermal { + thermal-sensors = <&tsens0 7>; + }; + + cpu7-thermal { + thermal-sensors = <&tsens0 8>; + }; + }; +}; + +/* + * SDM632 uses Kryo 250 instead of Cortex A53 + * CPU0-3 are efficiency cores, CPU4-7 are performance cores + */ +&CPU0 { + compatible = "qcom,kryo250"; +}; + +&CPU1 { + compatible = "qcom,kryo250"; +}; + +&CPU2 { + compatible = "qcom,kryo250"; +}; + +&CPU3 { + compatible = "qcom,kryo250"; +}; + +&CPU4 { + compatible = "qcom,kryo250"; + capacity-dmips-mhz = <1980>; +}; + +&CPU5 { + compatible = "qcom,kryo250"; + capacity-dmips-mhz = <1980>; +}; + +&CPU6 { + compatible = "qcom,kryo250"; + capacity-dmips-mhz = <1980>; +}; + +&CPU7 { + compatible = "qcom,kryo250"; + capacity-dmips-mhz = <1980>; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts b/arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts new file mode 100644 index 000000000..58f687fc4 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts @@ -0,0 +1,25 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Martin Botka + */ + +/dts-v1/; + +#include "sdm630-sony-xperia-ganges-kirin.dts" +#include "sdm636.dtsi" + +/ { + model = "Sony Xperia 10 Plus"; + compatible = "sony,mermaid-row", "qcom,sdm636"; + chassis-type = "handset"; + + /* SDM636 v1 */ + qcom,msm-id = <345 0>; + qcom,pmic-id = <0x1001b 0x101011a 0x00 0x00 0x1001b 0x201011a 0x00 0x00 0x1001b 0x102001a 0x00 0x00>; +}; + +&sdc2_state_on { + clk { + drive-strength = <14>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm636.dtsi b/arch/arm64/boot/dts/qcom/sdm636.dtsi new file mode 100644 index 000000000..ae15d81fa --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm636.dtsi @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, AngeloGioacchino Del Regno + * Copyright (c) 2020, Konrad Dybcio + * Copyright (c) 2020, Martin Botka + */ + +#include "sdm660.dtsi" + +/* + * According to the downstream DTS, + * 636 is basically a 660 except for + * different CPU frequencies, Adreno + * 509 instead of 512 and lack of + * turing IP. These differences will + * be addressed when the aforementioned + * peripherals will be enabled upstream. + */ + +&adreno_gpu { + compatible = "qcom,adreno-509.0", "qcom,adreno"; + /* Adreno 509 shares the frequency table with 512 */ +}; diff --git a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts new file mode 100644 index 000000000..a3559f6e3 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts @@ -0,0 +1,420 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2020, Alexey Minnekhanov + * Copyright (c) 2021, Dang Huynh + */ + +/dts-v1/; + +#include "sdm660.dtsi" +#include "pm660.dtsi" +#include "pm660l.dtsi" +#include +#include + +/ { + model = "Xiaomi Redmi Note 7"; + compatible = "xiaomi,lavender", "qcom,sdm660"; + chassis-type = "handset"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + stdout-path = "serial0:115200n8"; + + framebuffer0: framebuffer@9d400000 { + compatible = "simple-framebuffer"; + reg = <0 0x9d400000 0 (1080 * 2340 * 4)>; + width = <1080>; + height = <2340>; + stride = <(1080 * 4)>; + format = "a8r8g8b8"; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-volup { + label = "Volume Up"; + gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <15>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ramoops@a0000000 { + compatible = "ramoops"; + reg = <0x0 0xa0000000 0x0 0x400000>; + console-size = <0x20000>; + record-size = <0x20000>; + ftrace-size = <0x0>; + pmsg-size = <0x20000>; + }; + + framebuffer_mem: memory@9d400000 { + reg = <0x0 0x9d400000 0x0 0x23ff000>; + no-map; + }; + }; + + /* + * Until we hook up type-c detection, we + * have to stick with this. But it works. + */ + extcon_usb: extcon-usb { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&tlmm 58 GPIO_ACTIVE_HIGH>; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + status = "okay"; + + linux,code = ; +}; + +&qusb2phy0 { + status = "okay"; + + vdd-supply = <&vreg_l1b_0p925>; + vdda-phy-dpdm-supply = <&vreg_l7b_3p125>; +}; + +&rpm_requests { + pm660l-regulators { + compatible = "qcom,rpm-pm660l-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + + vdd_l1_l9_l10-supply = <&vreg_s2b_1p05>; + vdd_l2-supply = <&vreg_bob>; + vdd_l3_l5_l7_l8-supply = <&vreg_bob>; + vdd_l4_l6-supply = <&vreg_bob>; + vdd_bob-supply = <&vph_pwr>; + + vreg_s1b_1p125: s1 { + regulator-min-microvolt = <1125000>; + regulator-max-microvolt = <1125000>; + regulator-enable-ramp-delay = <200>; + }; + + vreg_s2b_1p05: s2 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-enable-ramp-delay = <200>; + }; + + /* LDOs */ + vreg_l1b_0p925: l1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <925000>; + regulator-enable-ramp-delay = <250>; + regulator-allow-set-load; + }; + + /* SDHCI 3.3V signal doesn't seem to be supported. */ + vreg_l2b_2p95: l2 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <2696000>; + regulator-enable-ramp-delay = <250>; + regulator-allow-set-load; + }; + + vreg_l3b_3p3: l3 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <250>; + regulator-allow-set-load; + }; + + vreg_l4b_2p95: l4 { + regulator-min-microvolt = <2944000>; + regulator-max-microvolt = <2952000>; + regulator-enable-ramp-delay = <250>; + + regulator-min-microamp = <200>; + regulator-max-microamp = <600000>; + regulator-system-load = <570000>; + regulator-allow-set-load; + }; + + /* + * Downstream specifies a range of 1721-3600mV, + * but the only assigned consumers are SDHCI2 VMMC + * and Coresight QPDI that both request pinned 2.95V. + * Tighten the range to 1.8-3.328 (closest to 3.3) to + * make the mmc driver happy. + */ + vreg_l5b_2p95: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3328000>; + regulator-enable-ramp-delay = <250>; + regulator-allow-set-load; + regulator-system-load = <800000>; + }; + + vreg_l7b_3p125: l7 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3125000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l8b_3p3: l8 { + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3400000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_bob: bob { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3600000>; + regulator-enable-ramp-delay = <500>; + }; + }; + + pm660-regulators { + compatible = "qcom,rpm-pm660-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + + vdd_l1_l6_l7-supply = <&vreg_s5a_1p35>; + vdd_l2_l3-supply = <&vreg_s2b_1p05>; + vdd_l5-supply = <&vreg_s2b_1p05>; + vdd_l8_l9_l10_l11_l12_l13_l14-supply = <&vreg_s4a_2p04>; + vdd_l15_l16_l17_l18_l19-supply = <&vreg_bob>; + + /* + * S1A (FTAPC0), S2A (FTAPC1), S3A (HFAPC1) are managed + * by the Core Power Reduction hardened (CPRh) and the + * Operating State Manager (OSM) HW automatically. + */ + + vreg_s4a_2p04: s4 { + regulator-min-microvolt = <1805000>; + regulator-max-microvolt = <2040000>; + regulator-enable-ramp-delay = <200>; + regulator-always-on; + }; + + vreg_s5a_1p35: s5 { + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1350000>; + regulator-enable-ramp-delay = <200>; + }; + + vreg_s6a_0p87: s6 { + regulator-min-microvolt = <504000>; + regulator-max-microvolt = <992000>; + regulator-enable-ramp-delay = <150>; + }; + + /* LDOs */ + vreg_l1a_1p225: l1 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1250000>; + regulator-enable-ramp-delay = <250>; + regulator-allow-set-load; + }; + + vreg_l2a_1p0: l2 { + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1010000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l3a_1p0: l3 { + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1010000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l5a_0p848: l5 { + regulator-min-microvolt = <525000>; + regulator-max-microvolt = <950000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l6a_1p3: l6 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1370000>; + regulator-allow-set-load; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l7a_1p2: l7 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l8a_1p8: l8 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <250>; + regulator-system-load = <325000>; + regulator-allow-set-load; + }; + + vreg_l9a_1p8: l9 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <1900000>; + regulator-enable-ramp-delay = <250>; + regulator-allow-set-load; + }; + + vreg_l10a_1p8: l10 { + regulator-min-microvolt = <1780000>; + regulator-max-microvolt = <1950000>; + regulator-enable-ramp-delay = <250>; + regulator-allow-set-load; + }; + + vreg_l11a_1p8: l11 { + regulator-min-microvolt = <1780000>; + regulator-max-microvolt = <1950000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l12a_1p8: l12 { + regulator-min-microvolt = <1780000>; + regulator-max-microvolt = <1950000>; + regulator-enable-ramp-delay = <250>; + }; + + /* This gives power to the LPDDR4: never turn it off! */ + vreg_l13a_1p8: l13 { + regulator-min-microvolt = <1780000>; + regulator-max-microvolt = <1950000>; + regulator-enable-ramp-delay = <250>; + regulator-boot-on; + regulator-always-on; + }; + + vreg_l14a_1p8: l14 { + regulator-min-microvolt = <1710000>; + regulator-max-microvolt = <1900000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l15a_1p8: l15 { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <2950000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l16a_2p7: l16 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <250>; + regulator-always-on; + }; + + vreg_l17a_1p8: l17 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <2952000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l19a_3p3: l19 { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3400000>; + regulator-enable-ramp-delay = <250>; + regulator-allow-set-load; + }; + }; +}; + +&pm660l_wled { + status = "okay"; + + qcom,switching-freq = <800>; + qcom,current-limit-microamp = <20000>; + qcom,num-strings = <2>; +}; + +&sdc2_state_on { + sd-cd { + pins = "gpio54"; + bias-pull-up; + drive-strength = <2>; + }; +}; + +&sdc2_state_off { + sd-cd { + pins = "gpio54"; + bias-disable; + drive-strength = <2>; + }; +}; + +&sdhc_1 { + status = "okay"; + supports-cqe; + + mmc-hs200-1_8v; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + + vmmc-supply = <&vreg_l4b_2p95>; + vqmmc-supply = <&vreg_l8a_1p8>; +}; + +&sdhc_2 { + status = "okay"; + + vmmc-supply = <&vreg_l5b_2p95>; + vqmmc-supply = <&vreg_l2b_2p95>; +}; + +&tlmm { + gpio-reserved-ranges = <8 4>; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + dr_mode = "peripheral"; + extcon = <&extcon_usb>; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm660.dtsi b/arch/arm64/boot/dts/qcom/sdm660.dtsi new file mode 100644 index 000000000..43220af1b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm660.dtsi @@ -0,0 +1,254 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2018, Craig Tatlor. + * Copyright (c) 2020, Alexey Minnekhanov + * Copyright (c) 2020, AngeloGioacchino Del Regno + * Copyright (c) 2020, Konrad Dybcio + * Copyright (c) 2020, Martin Botka + */ + +#include "sdm630.dtsi" + +&adreno_gpu { + compatible = "qcom,adreno-512.0", "qcom,adreno"; + operating-points-v2 = <&gpu_sdm660_opp_table>; + + gpu_sdm660_opp_table: opp-table { + compatible = "operating-points-v2"; + + /* + * 775MHz is only available on the highest speed bin + * Though it cannot be used for now due to interconnect + * framework not supporting multiple frequencies + * at the same opp-level + + opp-750000000 { + opp-hz = /bits/ 64 <750000000>; + opp-level = ; + opp-peak-kBps = <5412000>; + opp-supported-hw = <0xCHECKME>; + }; + + * These OPPs are correct, but we are lacking support for the + * GPU regulator. Hence, disable them for now to prevent the + * platform from hanging on high graphics loads. + + opp-700000000 { + opp-hz = /bits/ 64 <700000000>; + opp-level = ; + opp-peak-kBps = <5184000>; + opp-supported-hw = <0xFF>; + }; + + opp-647000000 { + opp-hz = /bits/ 64 <647000000>; + opp-level = ; + opp-peak-kBps = <4068000>; + opp-supported-hw = <0xFF>; + }; + + opp-588000000 { + opp-hz = /bits/ 64 <588000000>; + opp-level = ; + opp-peak-kBps = <3072000>; + opp-supported-hw = <0xFF>; + }; + + opp-465000000 { + opp-hz = /bits/ 64 <465000000>; + opp-level = ; + opp-peak-kBps = <2724000>; + opp-supported-hw = <0xFF>; + }; + + opp-370000000 { + opp-hz = /bits/ 64 <370000000>; + opp-level = ; + opp-peak-kBps = <2188000>; + opp-supported-hw = <0xFF>; + }; + */ + + opp-266000000 { + opp-hz = /bits/ 64 <266000000>; + opp-level = ; + opp-peak-kBps = <1648000>; + opp-supported-hw = <0xFF>; + }; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + opp-level = ; + opp-peak-kBps = <1200000>; + opp-supported-hw = <0xFF>; + }; + }; +}; + +&CPU0 { + compatible = "qcom,kryo260"; + capacity-dmips-mhz = <1024>; + /delete-property/ operating-points-v2; +}; + +&CPU1 { + compatible = "qcom,kryo260"; + capacity-dmips-mhz = <1024>; + /delete-property/ operating-points-v2; +}; + +&CPU2 { + compatible = "qcom,kryo260"; + capacity-dmips-mhz = <1024>; + /delete-property/ operating-points-v2; +}; + +&CPU3 { + compatible = "qcom,kryo260"; + capacity-dmips-mhz = <1024>; + /delete-property/ operating-points-v2; +}; + +&CPU4 { + compatible = "qcom,kryo260"; + capacity-dmips-mhz = <640>; + /delete-property/ operating-points-v2; +}; + +&CPU5 { + compatible = "qcom,kryo260"; + capacity-dmips-mhz = <640>; + /delete-property/ operating-points-v2; +}; + +&CPU6 { + compatible = "qcom,kryo260"; + capacity-dmips-mhz = <640>; + /delete-property/ operating-points-v2; +}; + +&CPU7 { + compatible = "qcom,kryo260"; + capacity-dmips-mhz = <640>; + /delete-property/ operating-points-v2; +}; + +&gcc { + compatible = "qcom,gcc-sdm660"; +}; + +&gpucc { + compatible = "qcom,gpucc-sdm660"; +}; + +&mdp { + ports { + port@1 { + reg = <1>; + mdp5_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; +}; + +&mdss { + dsi1: dsi@c996000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0x0c996000 0x400>; + reg-names = "dsi_ctrl"; + + /* DSI1 shares the OPP table with DSI0 */ + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmpd SDM660_VDDCX>; + + interrupt-parent = <&mdss>; + interrupts = <5>; + + assigned-clocks = <&mmcc BYTE1_CLK_SRC>, + <&mmcc PCLK1_CLK_SRC>; + assigned-clock-parents = <&dsi1_phy 0>, + <&dsi1_phy 1>; + + clocks = <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_BYTE1_CLK>, + <&mmcc MDSS_BYTE1_INTF_CLK>, + <&mmcc MNOC_AHB_CLK>, + <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MISC_AHB_CLK>, + <&mmcc MDSS_PCLK1_CLK>, + <&mmcc MDSS_ESC1_CLK>; + clock-names = "mdp_core", + "byte", + "byte_intf", + "mnoc", + "iface", + "bus", + "core_mmss", + "pixel", + "core"; + + phys = <&dsi1_phy>; + phy-names = "dsi"; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi1_in: endpoint { + remote-endpoint = <&mdp5_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + dsi1_out: endpoint { + }; + }; + }; + }; + + dsi1_phy: dsi-phy@c996400 { + compatible = "qcom,dsi-phy-14nm-660"; + reg = <0x0c996400 0x100>, + <0x0c996500 0x300>, + <0x0c996800 0x188>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "ref"; + status = "disabled"; + }; +}; + +&mmcc { + compatible = "qcom,mmcc-sdm660"; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&sleep_clk>, + <&gcc GCC_MMSS_GPLL0_CLK>, + <&gcc GCC_MMSS_GPLL0_DIV_CLK>, + <&dsi0_phy 1>, + <&dsi0_phy 0>, + <&dsi1_phy 1>, + <&dsi1_phy 0>, + <0>, + <0>; +}; + +&tlmm { + compatible = "qcom,sdm660-pinctrl"; +}; + +&tsens { + #qcom,sensors = <14>; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza-r1.dts b/arch/arm64/boot/dts/qcom/sdm845-cheza-r1.dts new file mode 100644 index 000000000..bd7c25bb8 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-cheza-r1.dts @@ -0,0 +1,238 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Cheza board device tree source + * + * Copyright 2018 Google LLC. + */ + +/dts-v1/; + +#include "sdm845-cheza.dtsi" + +/ { + model = "Google Cheza (rev1)"; + compatible = "google,cheza-rev1", "qcom,sdm845"; + + /* + * FIXED REGULATORS (not in sdm845-cheza.dtsi) - parents above children + */ + + /* + * NOTE: Technically pp3500_a is not the exact same signal as + * pp3500_a_vbob (there's a load switch between them and the EC can + * control pp3500_a via "en_pp3300_a"), but from the AP's point of + * view they are the same. + */ + pp3500_a: + pp3500_a_vbob: pp3500-a-vbob-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_bob"; + + /* + * Comes on automatically when pp5000_ldo comes on, which + * comes on automatically when ppvar_sys comes on + */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3500000>; + regulator-max-microvolt = <3500000>; + + vin-supply = <&ppvar_sys>; + }; + + pp3300_dx_edp: pp3300-dx-edp-regulator { + /* Yes, it's really 3.5 despite the name of the signal */ + regulator-min-microvolt = <3500000>; + regulator-max-microvolt = <3500000>; + + vin-supply = <&pp3500_a>; + }; +}; + +/* FIXED REGULATOR OVERRIDES (modifications to sdm845-cheza.dtsi) */ + +/* + * L19 and L28 technically go to 3.3V, but most boards have old AOP firmware + * that limits them to 3.0, and trying to run at 3.3V with that old firmware + * prevents the system from booting. + */ +&src_pp3000_l19a { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; +}; + +&src_pp3300_l22a { + /delete-property/regulator-boot-on; + /delete-property/regulator-always-on; +}; + +&src_pp3300_l28a { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; +}; + +&src_vreg_bob { + regulator-min-microvolt = <3500000>; + regulator-max-microvolt = <3500000>; + vin-supply = <&pp3500_a_vbob>; +}; + +/* + * NON-REGULATOR OVERRIDES + * (modifications to sdm845-cheza.dtsi) - alphabetized by dtsi label + */ + +/* PINCTRL - board-specific pinctrl */ + +&tlmm { + gpio-line-names = "AP_SPI_FP_MISO", + "AP_SPI_FP_MOSI", + "AP_SPI_FP_CLK", + "AP_SPI_FP_CS_L", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "", + "FP_RST_L", + "FCAM_EN", + "", + "EDP_BRIJ_IRQ", + "EC_IN_RW_ODL", + "", + "RCAM_MCLK", + "FCAM_MCLK", + "", + "RCAM_EN", + "CCI0_SDA", + "CCI0_SCL", + "CCI1_SDA", + "CCI1_SCL", + "FCAM_RST_L", + "", + "PEN_RST_L", + "PEN_IRQ_L", + "", + "RCAM_VSYNC", + "ESIM_MISO", + "ESIM_MOSI", + "ESIM_CLK", + "ESIM_CS_L", + "AP_PEN_1V8_SDA", + "AP_PEN_1V8_SCL", + "AP_TS_I2C_SDA", + "AP_TS_I2C_SCL", + "RCAM_RST_L", + "", + "AP_EDP_BKLTEN", + "AP_BRD_ID1", + "BOOT_CONFIG_4", + "AMP_IRQ_L", + "EDP_BRIJ_I2C_SDA", + "EDP_BRIJ_I2C_SCL", + "EN_PP3300_DX_EDP", + "SD_CD_ODL", + "BT_UART_RTS", + "BT_UART_CTS", + "BT_UART_RXD", + "BT_UART_TXD", + "AMP_I2C_SDA", + "AMP_I2C_SCL", + "AP_BRD_ID3", + "", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "AP_EC_SPI_MISO", + "AP_EC_SPI_MOSI", + "FORCED_USB_BOOT", + "AMP_BCLK", + "AMP_LRCLK", + "AMP_DOUT", + "AMP_DIN", + "AP_BRD_ID2", + "PEN_PDCT_L", + "HP_MCLK", + "HP_BCLK", + "HP_LRCLK", + "HP_DOUT", + "HP_DIN", + "", + "", + "", + "", + "BT_SLIMBUS_DATA", + "BT_SLIMBUS_CLK", + "AMP_RESET_L", + "", + "FCAM_VSYNC", + "", + "AP_SKU_ID1", + "EC_WOV_BCLK", + "EC_WOV_LRCLK", + "EC_WOV_DOUT", + "", + "", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + "AP_H1_SPI_CLK", + "AP_H1_SPI_CS_L", + "", + "AP_SPI_CS0_L", + "AP_SPI_MOSI", + "AP_SPI_MISO", + "", + "", + "AP_SPI_CLK", + "", + "RFFE6_CLK", + "RFFE6_DATA", + "BOOT_CONFIG_1", + "BOOT_CONFIG_2", + "BOOT_CONFIG_0", + "EDP_BRIJ_EN", + "", + "USB_HS_TX_EN", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RST", + "UIM2_PRESENT", + "UIM1_DATA", + "UIM1_CLK", + "UIM1_RST", + "", + "AP_SKU_ID2", + "SDM_GRFC_8", + "SDM_GRFC_9", + "AP_RST_REQ", + "HP_IRQ", + "TS_RESET_L", + "PEN_EJECT_ODL", + "HUB_RST_L", + "FP_TO_AP_IRQ", + "AP_EC_INT_L", + "", + "", + "TS_INT_L", + "AP_SUSPEND_L", + "SDM_GRFC_3", + "", + "H1_AP_INT_ODL", + "QLINK_REQ", + "QLINK_EN", + "SDM_GRFC_2", + "BOOT_CONFIG_3", + "WMSS_RESET_L", + "SDM_GRFC_0", + "SDM_GRFC_1", + "RFFE3_DATA", + "RFFE3_CLK", + "RFFE4_DATA", + "RFFE4_CLK", + "RFFE5_DATA", + "RFFE5_CLK", + "GNSS_EN", + "WCI2_LTE_COEX_RXD", + "WCI2_LTE_COEX_TXD", + "AP_RAM_ID1", + "AP_RAM_ID2", + "RFFE1_DATA", + "RFFE1_CLK"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dts b/arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dts new file mode 100644 index 000000000..2b7230594 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dts @@ -0,0 +1,238 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Cheza board device tree source + * + * Copyright 2018 Google LLC. + */ + +/dts-v1/; + +#include "sdm845-cheza.dtsi" + +/ { + model = "Google Cheza (rev2)"; + compatible = "google,cheza-rev2", "qcom,sdm845"; + + /* + * FIXED REGULATORS (not in sdm845-cheza.dtsi) - parents above children + */ + + /* + * NOTE: Technically pp3500_a is not the exact same signal as + * pp3500_a_vbob (there's a load switch between them and the EC can + * control pp3500_a via "en_pp3300_a"), but from the AP's point of + * view they are the same. + */ + pp3500_a: + pp3500_a_vbob: pp3500-a-vbob-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_bob"; + + /* + * Comes on automatically when pp5000_ldo comes on, which + * comes on automatically when ppvar_sys comes on + */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3500000>; + regulator-max-microvolt = <3500000>; + + vin-supply = <&ppvar_sys>; + }; + + pp3300_dx_edp: pp3300-dx-edp-regulator { + /* Yes, it's really 3.5 despite the name of the signal */ + regulator-min-microvolt = <3500000>; + regulator-max-microvolt = <3500000>; + + vin-supply = <&pp3500_a>; + }; +}; + +/* FIXED REGULATOR OVERRIDES (modifications to sdm845-cheza.dtsi) */ + +/* + * L19 and L28 technically go to 3.3V, but most boards have old AOP firmware + * that limits them to 3.0, and trying to run at 3.3V with that old firmware + * prevents the system from booting. + */ +&src_pp3000_l19a { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; +}; + +&src_pp3300_l22a { + /delete-property/regulator-boot-on; + /delete-property/regulator-always-on; +}; + +&src_pp3300_l28a { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; +}; + +&src_vreg_bob { + regulator-min-microvolt = <3500000>; + regulator-max-microvolt = <3500000>; + vin-supply = <&pp3500_a_vbob>; +}; + +/* + * NON-REGULATOR OVERRIDES + * (modifications to sdm845-cheza.dtsi) - alphabetized by dtsi label + */ + +/* PINCTRL - board-specific pinctrl */ + +&tlmm { + gpio-line-names = "AP_SPI_FP_MISO", + "AP_SPI_FP_MOSI", + "AP_SPI_FP_CLK", + "AP_SPI_FP_CS_L", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "BRIJ_SUSPEND", + "FP_RST_L", + "FCAM_EN", + "", + "EDP_BRIJ_IRQ", + "EC_IN_RW_ODL", + "", + "RCAM_MCLK", + "FCAM_MCLK", + "", + "RCAM_EN", + "CCI0_SDA", + "CCI0_SCL", + "CCI1_SDA", + "CCI1_SCL", + "FCAM_RST_L", + "FPMCU_BOOT0", + "PEN_RST_L", + "PEN_IRQ_L", + "FPMCU_SEL_OD", + "RCAM_VSYNC", + "ESIM_MISO", + "ESIM_MOSI", + "ESIM_CLK", + "ESIM_CS_L", + "AP_PEN_1V8_SDA", + "AP_PEN_1V8_SCL", + "AP_TS_I2C_SDA", + "AP_TS_I2C_SCL", + "RCAM_RST_L", + "", + "AP_EDP_BKLTEN", + "AP_BRD_ID1", + "BOOT_CONFIG_4", + "AMP_IRQ_L", + "EDP_BRIJ_I2C_SDA", + "EDP_BRIJ_I2C_SCL", + "EN_PP3300_DX_EDP", + "SD_CD_ODL", + "BT_UART_RTS", + "BT_UART_CTS", + "BT_UART_RXD", + "BT_UART_TXD", + "AMP_I2C_SDA", + "AMP_I2C_SCL", + "AP_BRD_ID3", + "", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "AP_EC_SPI_MISO", + "AP_EC_SPI_MOSI", + "FORCED_USB_BOOT", + "AMP_BCLK", + "AMP_LRCLK", + "AMP_DOUT", + "AMP_DIN", + "AP_BRD_ID2", + "PEN_PDCT_L", + "HP_MCLK", + "HP_BCLK", + "HP_LRCLK", + "HP_DOUT", + "HP_DIN", + "", + "", + "", + "", + "BT_SLIMBUS_DATA", + "BT_SLIMBUS_CLK", + "AMP_RESET_L", + "", + "FCAM_VSYNC", + "", + "AP_SKU_ID1", + "EC_WOV_BCLK", + "EC_WOV_LRCLK", + "EC_WOV_DOUT", + "", + "", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + "AP_H1_SPI_CLK", + "AP_H1_SPI_CS_L", + "", + "AP_SPI_CS0_L", + "AP_SPI_MOSI", + "AP_SPI_MISO", + "", + "", + "AP_SPI_CLK", + "", + "RFFE6_CLK", + "RFFE6_DATA", + "BOOT_CONFIG_1", + "BOOT_CONFIG_2", + "BOOT_CONFIG_0", + "EDP_BRIJ_EN", + "", + "USB_HS_TX_EN", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RST", + "UIM2_PRESENT", + "UIM1_DATA", + "UIM1_CLK", + "UIM1_RST", + "", + "AP_SKU_ID2", + "SDM_GRFC_8", + "SDM_GRFC_9", + "AP_RST_REQ", + "HP_IRQ", + "TS_RESET_L", + "PEN_EJECT_ODL", + "HUB_RST_L", + "FP_TO_AP_IRQ", + "AP_EC_INT_L", + "", + "", + "TS_INT_L", + "AP_SUSPEND_L", + "SDM_GRFC_3", + "", + "H1_AP_INT_ODL", + "QLINK_REQ", + "QLINK_EN", + "SDM_GRFC_2", + "BOOT_CONFIG_3", + "WMSS_RESET_L", + "SDM_GRFC_0", + "SDM_GRFC_1", + "RFFE3_DATA", + "RFFE3_CLK", + "RFFE4_DATA", + "RFFE4_CLK", + "RFFE5_DATA", + "RFFE5_CLK", + "GNSS_EN", + "WCI2_LTE_COEX_RXD", + "WCI2_LTE_COEX_TXD", + "AP_RAM_ID1", + "AP_RAM_ID2", + "RFFE1_DATA", + "RFFE1_CLK"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza-r3.dts b/arch/arm64/boot/dts/qcom/sdm845-cheza-r3.dts new file mode 100644 index 000000000..1ba67be08 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-cheza-r3.dts @@ -0,0 +1,174 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Cheza board device tree source + * + * Copyright 2018 Google LLC. + */ + +/dts-v1/; + +#include "sdm845-cheza.dtsi" + +/ { + model = "Google Cheza (rev3+)"; + compatible = "google,cheza", "qcom,sdm845"; +}; + +/* PINCTRL - board-specific pinctrl */ + +&tlmm { + gpio-line-names = "AP_SPI_FP_MISO", + "AP_SPI_FP_MOSI", + "AP_SPI_FP_CLK", + "AP_SPI_FP_CS_L", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "BRIJ_SUSPEND", + "FP_RST_L", + "FCAM_EN", + "", + "EDP_BRIJ_IRQ", + "EC_IN_RW_ODL", + "", + "RCAM_MCLK", + "FCAM_MCLK", + "", + "RCAM_EN", + "CCI0_SDA", + "CCI0_SCL", + "CCI1_SDA", + "CCI1_SCL", + "FCAM_RST_L", + "FPMCU_BOOT0", + "PEN_RST_L", + "PEN_IRQ_L", + "FPMCU_SEL_OD", + "RCAM_VSYNC", + "ESIM_MISO", + "ESIM_MOSI", + "ESIM_CLK", + "ESIM_CS_L", + "AP_PEN_1V8_SDA", + "AP_PEN_1V8_SCL", + "AP_TS_I2C_SDA", + "AP_TS_I2C_SCL", + "RCAM_RST_L", + "", + "AP_EDP_BKLTEN", + "AP_BRD_ID0", + "BOOT_CONFIG_4", + "AMP_IRQ_L", + "EDP_BRIJ_I2C_SDA", + "EDP_BRIJ_I2C_SCL", + "EN_PP3300_DX_EDP", + "SD_CD_ODL", + "BT_UART_RTS", + "BT_UART_CTS", + "BT_UART_RXD", + "BT_UART_TXD", + "AMP_I2C_SDA", + "AMP_I2C_SCL", + "AP_BRD_ID2", + "", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "AP_EC_SPI_MISO", + "AP_EC_SPI_MOSI", + "FORCED_USB_BOOT", + "AMP_BCLK", + "AMP_LRCLK", + "AMP_DOUT", + "AMP_DIN", + "AP_BRD_ID1", + "PEN_PDCT_L", + "HP_MCLK", + "HP_BCLK", + "HP_LRCLK", + "HP_DOUT", + "HP_DIN", + "", + "", + "", + "", + "BT_SLIMBUS_DATA", + "BT_SLIMBUS_CLK", + "AMP_RESET_L", + "", + "FCAM_VSYNC", + "", + "AP_SKU_ID0", + "EC_WOV_BCLK", + "EC_WOV_LRCLK", + "EC_WOV_DOUT", + "", + "", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + "AP_H1_SPI_CLK", + "AP_H1_SPI_CS_L", + "", + "AP_SPI_CS0_L", + "AP_SPI_MOSI", + "AP_SPI_MISO", + "", + "", + "AP_SPI_CLK", + "", + "RFFE6_CLK", + "RFFE6_DATA", + "BOOT_CONFIG_1", + "BOOT_CONFIG_2", + "BOOT_CONFIG_0", + "EDP_BRIJ_EN", + "", + "USB_HS_TX_EN", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RST", + "UIM2_PRESENT", + "UIM1_DATA", + "UIM1_CLK", + "UIM1_RST", + "", + "AP_SKU_ID1", + "SDM_GRFC_8", + "SDM_GRFC_9", + "AP_RST_REQ", + "HP_IRQ", + "TS_RESET_L", + "PEN_EJECT_ODL", + "HUB_RST_L", + "FP_TO_AP_IRQ", + "AP_EC_INT_L", + "", + "", + "TS_INT_L", + "AP_SUSPEND_L", + "SDM_GRFC_3", + /* + * AP_FLASH_WP_L is crossystem ABI. Rev3 schematics + * call it BIOS_FLASH_WP_R_L. + */ + "AP_FLASH_WP_L", + "H1_AP_INT_ODL", + "QLINK_REQ", + "QLINK_EN", + "SDM_GRFC_2", + "BOOT_CONFIG_3", + "WMSS_RESET_L", + "SDM_GRFC_0", + "SDM_GRFC_1", + "RFFE3_DATA", + "RFFE3_CLK", + "RFFE4_DATA", + "RFFE4_CLK", + "RFFE5_DATA", + "RFFE5_CLK", + "GNSS_EN", + "WCI2_LTE_COEX_RXD", + "WCI2_LTE_COEX_TXD", + "AP_RAM_ID0", + "AP_RAM_ID1", + "RFFE1_DATA", + "RFFE1_CLK"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi new file mode 100644 index 000000000..43ee28db6 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi @@ -0,0 +1,1476 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Cheza device tree source (common between revisions) + * + * Copyright 2018 Google LLC. + */ + +#include +#include +#include "sdm845.dtsi" + +/* PMICs depend on spmi_bus label and so must come after SoC */ +#include "pm8005.dtsi" +#include "pm8998.dtsi" + +/ { + aliases { + bluetooth0 = &bluetooth; + hsuart0 = &uart6; + serial0 = &uart9; + wifi0 = &wifi; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&cros_ec_pwm 0>; + enable-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; + power-supply = <&ppvar_sys>; + pinctrl-names = "default"; + pinctrl-0 = <&ap_edp_bklten>; + }; + + /* FIXED REGULATORS - parents above children */ + + /* This is the top level supply and variable voltage */ + ppvar_sys: ppvar-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "ppvar_sys"; + regulator-always-on; + regulator-boot-on; + }; + + /* This divides ppvar_sys by 2, so voltage is variable */ + src_vph_pwr: src-vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "src_vph_pwr"; + + /* EC turns on with switchcap_on_l; always on for AP */ + regulator-always-on; + regulator-boot-on; + + vin-supply = <&ppvar_sys>; + }; + + pp5000_a: pp5000-a-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp5000_a"; + + /* EC turns on with en_pp5000_a; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + vin-supply = <&ppvar_sys>; + }; + + src_vreg_bob: src-vreg-bob-regulator { + compatible = "regulator-fixed"; + regulator-name = "src_vreg_bob"; + + /* EC turns on with vbob_en; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + vin-supply = <&ppvar_sys>; + }; + + pp3300_dx_edp: pp3300-dx-edp-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp3300_dx_edp"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 43 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&en_pp3300_dx_edp>; + }; + + /* + * Apparently RPMh does not provide support for PM8998 S4 because it + * is always-on; model it as a fixed regulator. + */ + src_pp1800_s4a: pm8998-smps4 { + compatible = "regulator-fixed"; + regulator-name = "src_pp1800_s4a"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&src_vph_pwr>; + }; + + /* BOARD-SPECIFIC TOP LEVEL NODES */ + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pen_eject_odl>; + + switch-pen-insert { + label = "Pen Insert"; + /* Insert = low, eject = high */ + gpios = <&tlmm 119 GPIO_ACTIVE_LOW>; + linux,code = ; + linux,input-type = ; + wakeup-source; + }; + }; + + panel: panel { + compatible = "innolux,p120zdg-bf1"; + power-supply = <&pp3300_dx_edp>; + backlight = <&backlight>; + no-hpd; + + ports { + panel_in: port { + panel_in_edp: endpoint { + remote-endpoint = <&sn65dsi86_out>; + }; + }; + }; + }; +}; + +&cpufreq_hw { + /delete-property/ interrupts-extended; /* reference to lmh_cluster[01] */ +}; + +&psci { + /delete-node/ power-domain-cpu0; + /delete-node/ power-domain-cpu1; + /delete-node/ power-domain-cpu2; + /delete-node/ power-domain-cpu3; + /delete-node/ power-domain-cpu4; + /delete-node/ power-domain-cpu5; + /delete-node/ power-domain-cpu6; + /delete-node/ power-domain-cpu7; + /delete-node/ power-domain-cluster; +}; + +&cpus { + /delete-node/ domain-idle-states; +}; + +&cpu_idle_states { + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "little-power-down"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <350>; + exit-latency-us = <461>; + min-residency-us = <1890>; + local-timer-stop; + }; + + LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 { + compatible = "arm,idle-state"; + idle-state-name = "little-rail-power-down"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <360>; + exit-latency-us = <531>; + min-residency-us = <3934>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "big-power-down"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <264>; + exit-latency-us = <621>; + min-residency-us = <952>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_1: cpu-sleep-1-1 { + compatible = "arm,idle-state"; + idle-state-name = "big-rail-power-down"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <702>; + exit-latency-us = <1061>; + min-residency-us = <4488>; + local-timer-stop; + }; + + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "arm,idle-state"; + idle-state-name = "cluster-power-down"; + arm,psci-suspend-param = <0x400000F4>; + entry-latency-us = <3263>; + exit-latency-us = <6562>; + min-residency-us = <9987>; + local-timer-stop; + }; +}; + +&CPU0 { + /delete-property/ power-domains; + /delete-property/ power-domain-names; + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 + &LITTLE_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; +}; + +&CPU1 { + /delete-property/ power-domains; + /delete-property/ power-domain-names; + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 + &LITTLE_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; +}; + +&CPU2 { + /delete-property/ power-domains; + /delete-property/ power-domain-names; + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 + &LITTLE_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; +}; + +&CPU3 { + /delete-property/ power-domains; + /delete-property/ power-domain-names; + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 + &LITTLE_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; +}; + +&CPU4 { + /delete-property/ power-domains; + /delete-property/ power-domain-names; + cpu-idle-states = <&BIG_CPU_SLEEP_0 + &BIG_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; +}; + +&CPU5 { + /delete-property/ power-domains; + /delete-property/ power-domain-names; + cpu-idle-states = <&BIG_CPU_SLEEP_0 + &BIG_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; +}; + +&CPU6 { + /delete-property/ power-domains; + /delete-property/ power-domain-names; + cpu-idle-states = <&BIG_CPU_SLEEP_0 + &BIG_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; +}; + +&CPU7 { + /delete-property/ power-domains; + /delete-property/ power-domain-names; + cpu-idle-states = <&BIG_CPU_SLEEP_0 + &BIG_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; +}; + +&lmh_cluster0 { + status = "disabled"; +}; + +&lmh_cluster1 { + status = "disabled"; +}; + +/* + * Reserved memory changes + * + * Putting this all together (out of order with the rest of the file) to keep + * all modifications to the memory map (from sdm845.dtsi) in one place. + */ + +/* + * Our mpss_region is 8MB bigger than the default one and that conflicts + * with venus_mem and cdsp_mem. + * + * For venus_mem we'll delete and re-create at a different address. + * + * cdsp_mem isn't used on cheza right now so we won't bother re-creating it; but + * that also means we need to delete cdsp_pas. + */ +/delete-node/ &venus_mem; +/delete-node/ &cdsp_mem; +/delete-node/ &cdsp_pas; +/delete-node/ &gpu_mem; + +/* Increase the size from 120 MB to 128 MB */ +&mpss_region { + reg = <0 0x8e000000 0 0x8000000>; +}; + +/* Increase the size from 2MB to 8MB */ +&rmtfs_mem { + reg = <0 0x88f00000 0 0x800000>; +}; + +/ { + reserved-memory { + venus_mem: memory@96000000 { + reg = <0 0x96000000 0 0x500000>; + no-map; + }; + }; +}; + +&qspi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&qspi_clk &qspi_cs0 &qspi_data01>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + + /* + * In theory chip supports up to 104 MHz and controller up + * to 80 MHz, but above 25 MHz wasn't reliable so we'll use + * that for now. b:117440651 + */ + spi-max-frequency = <25000000>; + spi-tx-bus-width = <2>; + spi-rx-bus-width = <2>; + }; +}; + + +&apps_rsc { + /delete-property/ power-domains; + + regulators-0 { + compatible = "qcom,pm8998-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&src_vph_pwr>; + vdd-s2-supply = <&src_vph_pwr>; + vdd-s3-supply = <&src_vph_pwr>; + vdd-s4-supply = <&src_vph_pwr>; + vdd-s5-supply = <&src_vph_pwr>; + vdd-s6-supply = <&src_vph_pwr>; + vdd-s7-supply = <&src_vph_pwr>; + vdd-s8-supply = <&src_vph_pwr>; + vdd-s9-supply = <&src_vph_pwr>; + vdd-s10-supply = <&src_vph_pwr>; + vdd-s11-supply = <&src_vph_pwr>; + vdd-s12-supply = <&src_vph_pwr>; + vdd-s13-supply = <&src_vph_pwr>; + vdd-l1-l27-supply = <&src_pp1025_s7a>; + vdd-l2-l8-l17-supply = <&src_pp1350_s3a>; + vdd-l3-l11-supply = <&src_pp1025_s7a>; + vdd-l4-l5-supply = <&src_pp1025_s7a>; + vdd-l6-supply = <&src_vph_pwr>; + vdd-l7-l12-l14-l15-supply = <&src_pp2040_s5a>; + vdd-l9-supply = <&src_pp2040_s5a>; + vdd-l10-l23-l25-supply = <&src_vreg_bob>; + vdd-l13-l19-l21-supply = <&src_vreg_bob>; + vdd-l16-l28-supply = <&src_vreg_bob>; + vdd-l18-l22-supply = <&src_vreg_bob>; + vdd-l20-l24-supply = <&src_vreg_bob>; + vdd-l26-supply = <&src_pp1350_s3a>; + vin-lvs-1-2-supply = <&src_pp1800_s4a>; + + src_pp1125_s2a: smps2 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + src_pp1350_s3a: smps3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + src_pp2040_s5a: smps5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + + src_pp1025_s7a: smps7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + + vdd_qusb_hs0: + vdda_hp_pcie_core: + vdda_mipi_csi0_0p9: + vdda_mipi_csi1_0p9: + vdda_mipi_csi2_0p9: + vdda_mipi_dsi0_pll: + vdda_mipi_dsi1_pll: + vdda_qlink_lv: + vdda_qlink_lv_ck: + vdda_qrefs_0p875: + vdda_pcie_core: + vdda_pll_cc_ebi01: + vdda_pll_cc_ebi23: + vdda_sp_sensor: + vdda_ufs1_core: + vdda_ufs2_core: + vdda_usb1_ss_core: + vdda_usb2_ss_core: + src_pp875_l1a: ldo1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + }; + + vddpx_10: + src_pp1200_l2a: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + + /* TODO: why??? */ + regulator-always-on; + }; + + pp1000_l3a_sdr845: ldo3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = ; + }; + + vdd_wcss_cx: + vdd_wcss_mx: + vdda_wcss_pll: + src_pp800_l5a: ldo5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = ; + }; + + vddpx_13: + src_pp1800_l6a: ldo6 { + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <1856000>; + regulator-initial-mode = ; + }; + + pp1800_l7a_wcn3990: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + src_pp1200_l8a: ldo8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1248000>; + regulator-initial-mode = ; + }; + + pp1800_dx_pen: + src_pp1800_l9a: ldo9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + src_pp1800_l10a: ldo10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + pp1000_l11a_sdr845: ldo11 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1048000>; + regulator-initial-mode = ; + }; + + vdd_qfprom: + vdd_qfprom_sp: + vdda_apc1_cs_1p8: + vdda_gfx_cs_1p8: + vdda_qrefs_1p8: + vdda_qusb_hs0_1p8: + vddpx_11: + src_pp1800_l12a: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vddpx_2: + src_pp2950_l13a: ldo13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + src_pp1800_l14a: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + src_pp1800_l15a: ldo15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + pp2700_l16a: ldo16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + regulator-initial-mode = ; + }; + + src_pp1300_l17a: ldo17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = ; + }; + + pp2700_l18a: ldo18 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + /* + * NOTE: this rail should have been called + * src_pp3300_l19a in the schematic + */ + src_pp3000_l19a: ldo19 { + regulator-min-microvolt = <3304000>; + regulator-max-microvolt = <3304000>; + + regulator-initial-mode = ; + }; + + src_pp2950_l20a: ldo20 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + src_pp2950_l21a: ldo21 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + pp3300_hub: + src_pp3300_l22a: ldo22 { + regulator-min-microvolt = <3304000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = ; + /* + * HACK: Should add a usb hub node and driver + * to turn this on and off at suspend/resume time + */ + regulator-boot-on; + regulator-always-on; + }; + + pp3300_l23a_ch1_wcn3990: ldo23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + }; + + vdda_qusb_hs0_3p1: + src_pp3075_l24a: ldo24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = ; + }; + + pp3300_l25a_ch0_wcn3990: ldo25 { + regulator-min-microvolt = <3304000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = ; + }; + + pp1200_hub: + vdda_hp_pcie_1p2: + vdda_hv_ebi0: + vdda_hv_ebi1: + vdda_hv_ebi2: + vdda_hv_ebi3: + vdda_mipi_csi_1p25: + vdda_mipi_dsi0_1p2: + vdda_mipi_dsi1_1p2: + vdda_pcie_1p2: + vdda_ufs1_1p2: + vdda_ufs2_1p2: + vdda_usb1_ss_1p2: + vdda_usb2_ss_1p2: + src_pp1200_l26a: ldo26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + pp3300_dx_pen: + src_pp3300_l28a: ldo28 { + regulator-min-microvolt = <3304000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = ; + }; + + src_pp1800_lvs1: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + src_pp1800_lvs2: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8005-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&src_vph_pwr>; + vdd-s2-supply = <&src_vph_pwr>; + vdd-s3-supply = <&src_vph_pwr>; + vdd-s4-supply = <&src_vph_pwr>; + + src_pp600_s3c: smps3 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <600000>; + }; + }; +}; + +&dsi0 { + status = "okay"; + vdda-supply = <&vdda_mipi_dsi0_1p2>; + + ports { + port@1 { + endpoint { + remote-endpoint = <&sn65dsi86_in>; + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&dsi0_phy { + status = "okay"; + vdds-supply = <&vdda_mipi_dsi0_pll>; +}; + +edp_brij_i2c: &i2c3 { + status = "okay"; + clock-frequency = <400000>; + + sn65dsi86_bridge: bridge@2d { + compatible = "ti,sn65dsi86"; + reg = <0x2d>; + pinctrl-names = "default"; + pinctrl-0 = <&edp_brij_en &edp_brij_irq>; + + interrupt-parent = <&tlmm>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; + + enable-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>; + + vpll-supply = <&src_pp1800_s4a>; + vccio-supply = <&src_pp1800_s4a>; + vcca-supply = <&src_pp1200_l2a>; + vcc-supply = <&src_pp1200_l2a>; + + clocks = <&rpmhcc RPMH_LN_BB_CLK2>; + clock-names = "refclk"; + + no-hpd; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + sn65dsi86_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + sn65dsi86_out: endpoint { + remote-endpoint = <&panel_in_edp>; + }; + }; + }; + }; +}; + +ap_pen_1v8: &i2c11 { + status = "okay"; + clock-frequency = <400000>; + + digitizer@9 { + compatible = "wacom,w9013", "hid-over-i2c"; + reg = <0x9>; + pinctrl-names = "default"; + pinctrl-0 = <&pen_irq_l>, <&pen_pdct_l>, <&pen_rst_l>; + + vdd-supply = <&pp3300_dx_pen>; + vddl-supply = <&pp1800_dx_pen>; + post-power-on-delay-ms = <100>; + + interrupt-parent = <&tlmm>; + interrupts = <24 IRQ_TYPE_LEVEL_LOW>; + + hid-descr-addr = <0x1>; + }; +}; + +amp_i2c: &i2c12 { + status = "okay"; + clock-frequency = <400000>; +}; + +ap_ts_i2c: &i2c14 { + status = "okay"; + clock-frequency = <400000>; + + touchscreen@10 { + compatible = "elan,ekth3500"; + reg = <0x10>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_l &ts_reset_l>; + + interrupt-parent = <&tlmm>; + interrupts = <125 IRQ_TYPE_LEVEL_LOW>; + + vcc33-supply = <&src_pp3300_l28a>; + + reset-gpios = <&tlmm 118 GPIO_ACTIVE_LOW>; + }; +}; + +&gmu { + status = "okay"; +}; + +&gpu { + status = "okay"; +}; + +&ipa { + status = "okay"; + modem-init; +}; + +&lpasscc { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +/* + * Cheza fw does not properly program the GPU aperture to allow the + * GPU to update the SMMU pagetables for context switches. Work + * around this by dropping the "qcom,adreno-smmu" compat string. + */ +&adreno_smmu { + compatible = "qcom,sdm845-smmu-v2", "qcom,smmu-v2"; +}; + +&mss_pil { + status = "okay"; + + iommus = <&apps_smmu 0x781 0x0>, + <&apps_smmu 0x724 0x3>; +}; + +&pm8998_pwrkey { + status = "disabled"; +}; + +&qupv3_id_0 { + status = "okay"; + iommus = <&apps_smmu 0x0 0x3>; +}; + +&qupv3_id_1 { + status = "okay"; + iommus = <&apps_smmu 0x6c0 0x3>; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data &sd_cd_odl>; + + vmmc-supply = <&src_pp2950_l21a>; + vqmmc-supply = <&vddpx_2>; + + cd-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>; +}; + +&spi0 { + status = "okay"; +}; + +&spi5 { + status = "okay"; + + tpm@0 { + compatible = "google,cr50"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&h1_ap_int_odl>; + spi-max-frequency = <800000>; + interrupt-parent = <&tlmm>; + interrupts = <129 IRQ_TYPE_EDGE_RISING>; + }; +}; + +&spi10 { + status = "okay"; + + cros_ec: ec@0 { + compatible = "google,cros-ec-spi"; + reg = <0>; + interrupt-parent = <&tlmm>; + interrupts = <122 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ec_ap_int_l>; + spi-max-frequency = <3000000>; + + cros_ec_pwm: pwm { + compatible = "google,cros-ec-pwm"; + #pwm-cells = <1>; + }; + + i2c_tunnel: i2c-tunnel { + compatible = "google,cros-ec-i2c-tunnel"; + google,remote-bus = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +#include +#include + +&uart6 { + status = "okay"; + + bluetooth: wcn3990-bt { + compatible = "qcom,wcn3990-bt"; + vddio-supply = <&src_pp1800_s4a>; + vddxo-supply = <&pp1800_l7a_wcn3990>; + vddrf-supply = <&src_pp1300_l17a>; + vddch0-supply = <&pp3300_l25a_ch0_wcn3990>; + max-speed = <3200000>; + }; +}; + +&uart9 { + status = "okay"; +}; + +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; + + vcc-supply = <&src_pp2950_l20a>; + vcc-max-microamp = <600000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vdda_ufs1_core>; + vdda-pll-supply = <&vdda_ufs1_1p2>; +}; + +&usb_1 { + status = "okay"; + + /* We'll use this as USB 2.0 only */ + qcom,select-utmi-as-pipe-clk; +}; + +&usb_1_dwc3 { + /* + * The hardware design intends this port to be hooked up in peripheral + * mode, so we'll hardcode it here. Some details: + * - SDM845 expects only a single Type C connector so it has only one + * native Type C port but cheza has two Type C connectors. + * - The only source of DP is the single native Type C port. + * - On cheza we want to be able to hook DP up to _either_ of the + * two Type C connectors and want to be able to achieve 4 lanes of DP. + * - When you configure a Type C port for 4 lanes of DP you lose USB3. + * - In order to make everything work, the native Type C port is always + * configured as 4-lanes DP so it's always available. + * - The extra USB3 port on SDM845 goes to a USB 3 hub which is then + * sent to the two Type C connectors. + * - The extra USB2 lines from the native Type C port are always + * setup as "peripheral" so that we can mux them over to one connector + * or the other if someone needs the connector configured as a gadget + * (but they only get USB2 speeds). + * + * All the hardware muxes would allow us to hook things up in different + * ways to some potential benefit for static configurations (you could + * achieve extra USB2 bandwidth by using two different ports for the + * two connectors or possibly even get USB3 peripheral mode), but in + * each case you end up forcing to disconnect/reconnect an in-use + * USB session in some cases depending on what you hotplug into the + * other connector. Thus hardcoding this as peripheral makes sense. + */ + dr_mode = "peripheral"; + + /* + * We always need the high speed pins as 4-lanes DP in case someone + * hotplugs a DP peripheral. Thus limit this port to a max of high + * speed. + */ + maximum-speed = "high-speed"; + + /* + * We don't need the usb3-phy since we run in highspeed mode always, so + * re-define these properties removing the superspeed USB PHY reference. + */ + phys = <&usb_1_hsphy>; + phy-names = "usb2-phy"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdd-supply = <&vdda_usb1_ss_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = ; + qcom,preemphasis-level = ; + qcom,preemphasis-width = ; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3 { + /* We have this hooked up to a hub and we always use in host mode */ + dr_mode = "host"; +}; + +&usb_2_hsphy { + status = "okay"; + + vdd-supply = <&vdda_usb2_ss_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = ; +}; + +&usb_2_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vdda_usb2_ss_1p2>; + vdda-pll-supply = <&vdda_usb2_ss_core>; +}; + +&wifi { + status = "okay"; + + vdd-0.8-cx-mx-supply = <&src_pp800_l5a >; + vdd-1.8-xo-supply = <&pp1800_l7a_wcn3990>; + vdd-1.3-rfa-supply = <&src_pp1300_l17a>; + vdd-3.3-ch0-supply = <&pp3300_l25a_ch0_wcn3990>; +}; + +/* PINCTRL - additions to nodes defined in sdm845.dtsi */ + +&qspi_cs0 { + pinconf { + pins = "gpio90"; + bias-disable; + }; +}; + +&qspi_clk { + pinconf { + pins = "gpio95"; + bias-disable; + }; +}; + +&qspi_data01 { + pinconf { + pins = "gpio91", "gpio92"; + + /* High-Z when no transfers; nice to park the lines */ + bias-pull-up; + }; +}; + +&qup_i2c3_default { + pinconf { + pins = "gpio41", "gpio42"; + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; + }; +}; + +&qup_i2c11_default { + pinconf { + pins = "gpio31", "gpio32"; + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; + }; +}; + +&qup_i2c12_default { + pinconf { + pins = "gpio49", "gpio50"; + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; + }; +}; + +&qup_i2c14_default { + pinconf { + pins = "gpio33", "gpio34"; + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; + }; +}; + +&qup_spi0_default { + pinconf { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + drive-strength = <2>; + bias-disable; + }; +}; + +&qup_spi5_default { + pinconf { + pins = "gpio85", "gpio86", "gpio87", "gpio88"; + drive-strength = <2>; + bias-disable; + }; +}; + +&qup_spi10_default { + pinconf { + pins = "gpio53", "gpio54", "gpio55", "gpio56"; + drive-strength = <2>; + bias-disable; + }; +}; + +&qup_uart6_default { + /* Change pinmux to all 4 pins since CTS and RTS are connected */ + pinmux { + pins = "gpio45", "gpio46", + "gpio47", "gpio48"; + }; + + pinconf-cts { + /* + * Configure a pull-down on 45 (CTS) to match the pull of + * the Bluetooth module. + */ + pins = "gpio45"; + bias-pull-down; + }; + + pinconf-rts-tx { + /* We'll drive 46 (RTS) and 47 (TX), so no pull */ + pins = "gpio46", "gpio47"; + drive-strength = <2>; + bias-disable; + }; + + pinconf-rx { + /* + * Configure a pull-up on 48 (RX). This is needed to avoid + * garbage data when the TX pin of the Bluetooth module is + * in tri-state (module powered off or not driving the + * signal yet). + */ + pins = "gpio48"; + bias-pull-up; + }; +}; + +&qup_uart9_default { + pinconf-tx { + pins = "gpio4"; + drive-strength = <2>; + bias-disable; + }; + + pinconf-rx { + pins = "gpio5"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +/* PINCTRL - board-specific pinctrl */ +&pm8005_gpio { + gpio-line-names = "", + "", + "SLB", + ""; +}; + +&pm8998_adc { + adc-chan@4d { + reg = ; + label = "sdm_temp"; + }; + + adc-chan@4e { + reg = ; + label = "quiet_temp"; + }; + + adc-chan@4f { + reg = ; + label = "lte_temp_1"; + }; + + adc-chan@50 { + reg = ; + label = "lte_temp_2"; + }; + + adc-chan@51 { + reg = ; + label = "charger_temp"; + }; +}; + +&pm8998_gpio { + gpio-line-names = "", + "", + "SW_CTRL", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "CFG_OPT1", + "WCSS_PWR_REQ", + "", + "CFG_OPT2", + "SLB"; +}; + +&tlmm { + /* + * pinctrl settings for pins that have no real owners. + */ + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&bios_flash_wp_r_l>, + <&ap_suspend_l_deassert>; + + pinctrl-1 = <&bios_flash_wp_r_l>, + <&ap_suspend_l_assert>; + + /* + * Hogs prevent usermode from changing the value. A GPIO can be both + * here and in the pinctrl section. + */ + ap-suspend-l-hog { + gpio-hog; + gpios = <126 GPIO_ACTIVE_LOW>; + output-low; + }; + + ap_edp_bklten: ap-edp-bklten { + pinmux { + pins = "gpio37"; + function = "gpio"; + }; + + pinconf { + pins = "gpio37"; + drive-strength = <2>; + bias-disable; + }; + }; + + bios_flash_wp_r_l: bios-flash-wp-r-l { + pinmux { + pins = "gpio128"; + function = "gpio"; + input-enable; + }; + + pinconf { + pins = "gpio128"; + bias-disable; + }; + }; + + ec_ap_int_l: ec-ap-int-l { + pinmux { + pins = "gpio122"; + function = "gpio"; + input-enable; + }; + + pinconf { + pins = "gpio122"; + bias-pull-up; + }; + }; + + edp_brij_en: edp-brij-en { + pinmux { + pins = "gpio102"; + function = "gpio"; + }; + + pinconf { + pins = "gpio102"; + drive-strength = <2>; + bias-disable; + }; + }; + + edp_brij_irq: edp-brij-irq { + pinmux { + pins = "gpio10"; + function = "gpio"; + }; + + pinconf { + pins = "gpio10"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + en_pp3300_dx_edp: en-pp3300-dx-edp { + pinmux { + pins = "gpio43"; + function = "gpio"; + }; + + pinconf { + pins = "gpio43"; + drive-strength = <2>; + bias-disable; + }; + }; + + h1_ap_int_odl: h1-ap-int-odl { + pinmux { + pins = "gpio129"; + function = "gpio"; + input-enable; + }; + + pinconf { + pins = "gpio129"; + bias-pull-up; + }; + }; + + pen_eject_odl: pen-eject-odl { + pinmux { + pins = "gpio119"; + function = "gpio"; + bias-pull-up; + }; + }; + + pen_irq_l: pen-irq-l { + pinmux { + pins = "gpio24"; + function = "gpio"; + }; + + pinconf { + pins = "gpio24"; + + /* Has external pullup */ + bias-disable; + }; + }; + + pen_pdct_l: pen-pdct-l { + pinmux { + pins = "gpio63"; + function = "gpio"; + }; + + pinconf { + pins = "gpio63"; + + /* Has external pullup */ + bias-disable; + }; + }; + + pen_rst_l: pen-rst-l { + pinmux { + pins = "gpio23"; + function = "gpio"; + }; + + pinconf { + pins = "gpio23"; + bias-disable; + drive-strength = <2>; + + /* + * The pen driver doesn't currently support + * driving this reset line. By specifying + * output-high here we're relying on the fact + * that this pin has a default pulldown at boot + * (which makes sure the pen was in reset if it + * was powered) and then we set it high here to + * take it out of reset. Better would be if the + * pen driver could control this and we could + * remove "output-high" here. + */ + output-high; + }; + }; + + sdc2_clk: sdc2-clk { + pinconf { + pins = "sdc2_clk"; + bias-disable; + + /* + * It seems that mmc_test reports errors if drive + * strength is not 16. + */ + drive-strength = <16>; + }; + }; + + sdc2_cmd: sdc2-cmd { + pinconf { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <16>; + }; + }; + + sdc2_data: sdc2-data { + pinconf { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <16>; + }; + }; + + sd_cd_odl: sd-cd-odl { + pinmux { + pins = "gpio44"; + function = "gpio"; + }; + + pinconf { + pins = "gpio44"; + bias-pull-up; + }; + }; + + ts_int_l: ts-int-l { + pinmux { + pins = "gpio125"; + function = "gpio"; + }; + + pinconf { + pins = "gpio125"; + bias-pull-up; + }; + }; + + ts_reset_l: ts-reset-l { + pinmux { + pins = "gpio118"; + function = "gpio"; + }; + + pinconf { + pins = "gpio118"; + bias-disable; + drive-strength = <2>; + }; + }; + + ap_suspend_l_assert: ap_suspend_l_assert { + config { + pins = "gpio126"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + output-low; + }; + }; + + ap_suspend_l_deassert: ap_suspend_l_deassert { + config { + pins = "gpio126"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + output-high; + }; + }; +}; + +&venus { + status = "okay"; + + video-firmware { + iommus = <&apps_smmu 0x10b2 0x0>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts new file mode 100644 index 000000000..135ff4368 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -0,0 +1,1302 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2019, Linaro Ltd. + */ + +/dts-v1/; + +#include +#include +#include +#include +#include +#include "sdm845.dtsi" +#include "pm8998.dtsi" +#include "pmi8998.dtsi" + +/ { + model = "Thundercomm Dragonboard 845c"; + compatible = "thundercomm,db845c", "qcom,sdm845"; + qcom,msm-id = <341 0x20001>; + qcom,board-id = <8 0>; + + aliases { + serial0 = &uart9; + hsuart0 = &uart6; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + /* Fixed crystal oscillator dedicated to MCP2517FD */ + clk40M: can-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <40000000>; + }; + + dc12v: dc12v-regulator { + compatible = "regulator-fixed"; + regulator-name = "DC12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&vol_up_pin_a>; + + key-vol-up { + label = "Volume Up"; + linux,code = ; + gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + label = "green:user4"; + function = LED_FUNCTION_INDICATOR; + color = ; + gpios = <&pm8998_gpio 13 GPIO_ACTIVE_HIGH>; + default-state = "off"; + panic-indicator; + }; + + led-1 { + label = "yellow:wlan"; + function = LED_FUNCTION_WLAN; + color = ; + gpios = <&pm8998_gpio 9 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + + led-2 { + label = "blue:bt"; + function = LED_FUNCTION_BLUETOOTH; + color = ; + gpios = <&pm8998_gpio 5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "bluetooth-power"; + default-state = "off"; + }; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <<9611_out>; + }; + }; + }; + + reserved-memory { + /* Cont splash region set up by the bootloader */ + cont_splash_mem: framebuffer@9d400000 { + reg = <0x0 0x9d400000 0x0 0x2400000>; + no-map; + }; + }; + + lt9611_1v8: lt9611-vdd18-regulator { + compatible = "regulator-fixed"; + regulator-name = "LT9611_1V8"; + + vin-supply = <&vdc_5v>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + lt9611_3v3: lt9611-3v3 { + compatible = "regulator-fixed"; + regulator-name = "LT9611_3V3"; + + vin-supply = <&vdc_3v3>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + // TODO: make it possible to drive same GPIO from two clients + // gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>; + // enable-active-high; + }; + + pcie0_1p05v: pcie-0-1p05v-regulator { + compatible = "regulator-fixed"; + regulator-name = "PCIE0_1.05V"; + + vin-supply = <&vbat>; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + + // TODO: make it possible to drive same GPIO from two clients + // gpio = <&tlmm 90 GPIO_ACTIVE_HIGH>; + // enable-active-high; + }; + + cam0_dvdd_1v2: reg_cam0_dvdd_1v2 { + compatible = "regulator-fixed"; + regulator-name = "CAM0_DVDD_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + enable-active-high; + gpio = <&pm8998_gpio 12 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cam0_dvdd_1v2_en_default>; + vin-supply = <&vbat>; + }; + + cam0_avdd_2v8: reg_cam0_avdd_2v8 { + compatible = "regulator-fixed"; + regulator-name = "CAM0_AVDD_2V8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + enable-active-high; + gpio = <&pm8998_gpio 10 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cam0_avdd_2v8_en_default>; + vin-supply = <&vbat>; + }; + + /* This regulator is enabled when the VREG_LVS1A_1P8 trace is enabled */ + cam3_avdd_2v8: reg_cam3_avdd_2v8 { + compatible = "regulator-fixed"; + regulator-name = "CAM3_AVDD_2V8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + vin-supply = <&vbat>; + }; + + pcie0_3p3v_dual: vldo-3v3-regulator { + compatible = "regulator-fixed"; + regulator-name = "VLDO_3V3"; + + vin-supply = <&vbat>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 90 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_pwren_state>; + }; + + v5p0_hdmiout: v5p0-hdmiout-regulator { + compatible = "regulator-fixed"; + regulator-name = "V5P0_HDMIOUT"; + + vin-supply = <&vdc_5v>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <500000>; + + // TODO: make it possible to drive same GPIO from two clients + // gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>; + // enable-active-high; + }; + + vbat: vbat-regulator { + compatible = "regulator-fixed"; + regulator-name = "VBAT"; + + vin-supply = <&dc12v>; + regulator-min-microvolt = <4200000>; + regulator-max-microvolt = <4200000>; + regulator-always-on; + }; + + vbat_som: vbat-som-regulator { + compatible = "regulator-fixed"; + regulator-name = "VBAT_SOM"; + + vin-supply = <&dc12v>; + regulator-min-microvolt = <4200000>; + regulator-max-microvolt = <4200000>; + regulator-always-on; + }; + + vdc_3v3: vdc-3v3-regulator { + compatible = "regulator-fixed"; + regulator-name = "VDC_3V3"; + vin-supply = <&dc12v>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdc_5v: vdc-5v-regulator { + compatible = "regulator-fixed"; + regulator-name = "VDC_5V"; + + vin-supply = <&dc12v>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <500000>; + regulator-always-on; + }; + + vreg_s4a_1p8: vreg-s4a-1p8 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + + vin-supply = <&vbat_som>; + }; +}; + +&adsp_pas { + status = "okay"; + + firmware-name = "qcom/sdm845/adsp.mbn"; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8998-rpmh-regulators"; + qcom,pmic-id = "a"; + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + vdd-s13-supply = <&vph_pwr>; + vdd-l1-l27-supply = <&vreg_s7a_1p025>; + vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>; + vdd-l3-l11-supply = <&vreg_s7a_1p025>; + vdd-l4-l5-supply = <&vreg_s7a_1p025>; + vdd-l6-supply = <&vph_pwr>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; + vdd-l9-supply = <&vreg_bob>; + vdd-l10-l23-l25-supply = <&vreg_bob>; + vdd-l13-l19-l21-supply = <&vreg_bob>; + vdd-l16-l28-supply = <&vreg_bob>; + vdd-l18-l22-supply = <&vreg_bob>; + vdd-l20-l24-supply = <&vreg_bob>; + vdd-l26-supply = <&vreg_s3a_1p35>; + vin-lvs-1-2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p35: smps3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_s5a_2p04: smps5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7a_1p025: smps7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + + vreg_l1a_0p875: ldo1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + }; + + vreg_l5a_0p8: ldo5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = ; + }; + + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l13a_2p95: ldo13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l17a_1p3: ldo17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = ; + }; + + vreg_l20a_2p95: ldo20 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2968000>; + regulator-initial-mode = ; + }; + + vreg_l21a_2p95: ldo21 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2968000>; + regulator-initial-mode = ; + }; + + vreg_l24a_3p075: ldo24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = ; + }; + + vreg_l25a_3p3: ldo25 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + }; + + vreg_l26a_1p2: ldo26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_lvs1a_1p8: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + }; + + regulators-1 { + compatible = "qcom,pmi8998-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3600000>; + regulator-initial-mode = ; + regulator-allow-bypass; + }; + }; +}; + +&cdsp_pas { + status = "okay"; + firmware-name = "qcom/sdm845/cdsp.mbn"; +}; + +&dsi0 { + status = "okay"; + vdda-supply = <&vreg_l26a_1p2>; + + ports { + port@1 { + endpoint { + remote-endpoint = <<9611_a>; + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&dsi0_phy { + status = "okay"; + vdds-supply = <&vreg_l1a_0p875>; +}; + +&gcc { + protected-clocks = , + , + , + , + ; +}; + +&gmu { + status = "okay"; +}; + +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&gpu { + status = "okay"; + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sdm845/a630_zap.mbn"; + }; +}; + +&i2c10 { + status = "okay"; + clock-frequency = <400000>; + + lt9611_codec: hdmi-bridge@3b { + compatible = "lontium,lt9611"; + reg = <0x3b>; + #sound-dai-cells = <1>; + + interrupts-extended = <&tlmm 84 IRQ_TYPE_EDGE_FALLING>; + + reset-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>; + + vdd-supply = <<9611_1v8>; + vcc-supply = <<9611_3v3>; + + pinctrl-names = "default"; + pinctrl-0 = <<9611_irq_pin>, <&dsi_sw_sel>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lt9611_a: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@2 { + reg = <2>; + + lt9611_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; +}; + +&i2c11 { + /* On Low speed expansion */ + clock-frequency = <100000>; + label = "LS-I2C1"; + status = "okay"; +}; + +&i2c14 { + /* On Low speed expansion */ + clock-frequency = <100000>; + label = "LS-I2C0"; + status = "okay"; +}; + +&mdss { + memory-region = <&cont_splash_mem>; + status = "okay"; +}; + +&mss_pil { + status = "okay"; + firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn"; +}; + +&pcie0 { + status = "okay"; + perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; + enable-gpio = <&tlmm 134 GPIO_ACTIVE_HIGH>; + + vddpe-3v3-supply = <&pcie0_3p3v_dual>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_default_state>; +}; + +&pcie0_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l26a_1p2>; +}; + +&pcie1 { + status = "okay"; + perst-gpios = <&tlmm 102 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_default_state>; +}; + +&pcie1_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l26a_1p2>; +}; + +&pm8998_gpio { + gpio-line-names = + "NC", + "NC", + "WLAN_SW_CTRL", + "NC", + "PM_GPIO5_BLUE_BT_LED", + "VOL_UP_N", + "NC", + "ADC_IN1", + "PM_GPIO9_YEL_WIFI_LED", + "CAM0_AVDD_EN", + "NC", + "CAM0_DVDD_EN", + "PM_GPIO13_GREEN_U4_LED", + "DIV_CLK2", + "NC", + "NC", + "NC", + "SMB_STAT", + "NC", + "NC", + "ADC_IN2", + "OPTION1", + "WCSS_PWR_REQ", + "PM845_GPIO24", + "OPTION2", + "PM845_SLB"; + + cam0_dvdd_1v2_en_default: cam0-dvdd-1v2-en-state { + pins = "gpio12"; + function = "normal"; + + bias-pull-up; + drive-push-pull; + qcom,drive-strength = ; + }; + + cam0_avdd_2v8_en_default: cam0-avdd-2v8-en-state { + pins = "gpio10"; + function = "normal"; + + bias-pull-up; + drive-push-pull; + qcom,drive-strength = ; + }; + + vol_up_pin_a: vol-up-active-state { + pins = "gpio6"; + function = "normal"; + input-enable; + bias-pull-up; + qcom,drive-strength = ; + }; +}; + +&pm8998_pon { + resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = ; + }; +}; + +&pmi8998_lpg { + status = "okay"; + + qcom,power-source = <1>; + + led@3 { + reg = <3>; + color = ; + function = LED_FUNCTION_HEARTBEAT; + function-enumerator = <3>; + + linux,default-trigger = "heartbeat"; + default-state = "on"; + }; + + led@4 { + reg = <4>; + color = ; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <2>; + }; + + led@5 { + reg = <5>; + color = ; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <1>; + }; +}; + +/* QUAT I2S Uses 4 I2S SD Lines for audio on LT9611 HDMI Bridge */ +&q6afedai { + qi2s@22 { + reg = ; + qcom,sd-lines = <0 1 2 3>; + }; +}; + +&q6asmdai { + dai@0 { + reg = <0>; + }; + + dai@1 { + reg = <1>; + }; + + dai@2 { + reg = <2>; + }; + + dai@3 { + reg = <3>; + direction = <2>; + is-compress-dai; + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>; + + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vreg_l13a_2p95>; + + bus-width = <4>; + cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>; +}; + +&sound { + compatible = "qcom,db845c-sndcard"; + pinctrl-0 = <&quat_mi2s_active + &quat_mi2s_sd0_active + &quat_mi2s_sd1_active + &quat_mi2s_sd2_active + &quat_mi2s_sd3_active>; + pinctrl-names = "default"; + model = "DB845c"; + audio-routing = + "RX_BIAS", "MCLK", + "AMIC1", "MIC BIAS1", + "AMIC2", "MIC BIAS2", + "DMIC0", "MIC BIAS1", + "DMIC1", "MIC BIAS1", + "DMIC2", "MIC BIAS3", + "DMIC3", "MIC BIAS3", + "SpkrLeft IN", "SPK1 OUT", + "SpkrRight IN", "SPK2 OUT", + "MM_DL1", "MultiMedia1 Playback", + "MM_DL2", "MultiMedia2 Playback", + "MM_DL4", "MultiMedia4 Playback", + "MultiMedia3 Capture", "MM_UL3"; + + mm1-dai-link { + link-name = "MultiMedia1"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + mm2-dai-link { + link-name = "MultiMedia2"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + mm3-dai-link { + link-name = "MultiMedia3"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + mm4-dai-link { + link-name = "MultiMedia4"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>; + }; + }; + + hdmi-dai-link { + link-name = "HDMI Playback"; + cpu { + sound-dai = <&q6afedai QUATERNARY_MI2S_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <<9611_codec 0>; + }; + }; + + slim-dai-link { + link-name = "SLIM Playback"; + cpu { + sound-dai = <&q6afedai SLIMBUS_0_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>; + }; + }; + + slimcap-dai-link { + link-name = "SLIM Capture"; + cpu { + sound-dai = <&q6afedai SLIMBUS_0_TX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9340 1>; + }; + }; +}; + +&spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi0_default>; + cs-gpios = <&tlmm 3 GPIO_ACTIVE_LOW>; + + can@0 { + compatible = "microchip,mcp2517fd"; + reg = <0>; + clocks = <&clk40M>; + interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>; + spi-max-frequency = <10000000>; + vdd-supply = <&vdc_5v>; + xceiver-supply = <&vdc_5v>; + }; +}; + +&spi2 { + /* On Low speed expansion */ + label = "LS-SPI0"; + status = "okay"; +}; + +&tlmm { + cam0_default: cam0_default { + rst { + pins = "gpio9"; + function = "gpio"; + + drive-strength = <16>; + bias-disable; + }; + + mclk0 { + pins = "gpio13"; + function = "cam_mclk"; + + drive-strength = <16>; + bias-disable; + }; + }; + + cam3_default: cam3_default { + rst { + function = "gpio"; + pins = "gpio21"; + + drive-strength = <16>; + bias-disable; + }; + + mclk3 { + function = "cam_mclk"; + pins = "gpio16"; + + drive-strength = <16>; + bias-disable; + }; + }; + + dsi_sw_sel: dsi-sw-sel { + pins = "gpio120"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + output-high; + }; + + lt9611_irq_pin: lt9611-irq { + pins = "gpio84"; + function = "gpio"; + bias-disable; + }; + + pcie0_default_state: pcie0-default { + clkreq { + pins = "gpio36"; + function = "pci_e0"; + bias-pull-up; + }; + + reset-n { + pins = "gpio35"; + function = "gpio"; + + drive-strength = <2>; + output-low; + bias-pull-down; + }; + + wake-n { + pins = "gpio37"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie0_pwren_state: pcie0-pwren { + pins = "gpio90"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + pcie1_default_state: pcie1-default { + perst-n { + pins = "gpio102"; + function = "gpio"; + + drive-strength = <16>; + bias-disable; + }; + + clkreq { + pins = "gpio103"; + function = "pci_e1"; + bias-pull-up; + }; + + wake-n { + pins = "gpio11"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + + reset-n { + pins = "gpio75"; + function = "gpio"; + + drive-strength = <16>; + bias-pull-up; + output-high; + }; + }; + + sdc2_default_state: sdc2-default { + clk { + pins = "sdc2_clk"; + bias-disable; + + /* + * It seems that mmc_test reports errors if drive + * strength is not 16 on clk, cmd, and data pins. + */ + drive-strength = <16>; + }; + + cmd { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + }; + + sdc2_card_det_n: sd-card-det-n { + pins = "gpio126"; + function = "gpio"; + bias-pull-up; + }; + + wcd_intr_default: wcd_intr_default { + pins = "gpio54"; + function = "gpio"; + + input-enable; + bias-pull-down; + drive-strength = <2>; + }; +}; + +&uart3 { + label = "LS-UART0"; + status = "disabled"; +}; + +&uart6 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + max-speed = <3200000>; + }; +}; + +&uart9 { + label = "LS-UART1"; + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdd-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = ; + qcom,preemphasis-level = ; + qcom,preemphasis-width = ; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l26a_1p2>; + vdda-pll-supply = <&vreg_l1a_0p875>; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; +}; + +&usb_2_hsphy { + status = "okay"; + + vdd-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = ; +}; + +&usb_2_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l26a_1p2>; + vdda-pll-supply = <&vreg_l1a_0p875>; +}; + +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l20a_2p95>; + vcc-max-microamp = <800000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l26a_1p2>; +}; + +&venus { + status = "okay"; +}; + +&wcd9340{ + pinctrl-0 = <&wcd_intr_default>; + pinctrl-names = "default"; + clock-names = "extclk"; + clocks = <&rpmhcc RPMH_LN_BB_CLK2>; + reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-buck-sido-supply = <&vreg_s4a_1p8>; + vdd-tx-supply = <&vreg_s4a_1p8>; + vdd-rx-supply = <&vreg_s4a_1p8>; + vdd-io-supply = <&vreg_s4a_1p8>; + + swm: swm@c85 { + left_spkr: wsa8810-left{ + compatible = "sdw10217201000"; + reg = <0 1>; + powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>; + #thermal-sensor-cells = <0>; + sound-name-prefix = "SpkrLeft"; + #sound-dai-cells = <0>; + }; + + right_spkr: wsa8810-right{ + compatible = "sdw10217201000"; + powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>; + reg = <0 2>; + #thermal-sensor-cells = <0>; + sound-name-prefix = "SpkrRight"; + #sound-dai-cells = <0>; + }; + }; +}; + +&wifi { + status = "okay"; + + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; + + qcom,snoc-host-cap-8bit-quirk; + qcom,ath10k-calibration-variant = "Thundercomm_DB845C"; +}; + +/* PINCTRL - additions to nodes defined in sdm845.dtsi */ +&qup_spi2_default { + pinconf { + pins = "gpio27", "gpio28", "gpio29", "gpio30"; + drive-strength = <16>; + }; +}; + +&qup_uart3_default{ + pinmux { + pins = "gpio41", "gpio42", "gpio43", "gpio44"; + function = "qup3"; + }; +}; + +&qup_i2c10_default { + pinconf { + pins = "gpio55", "gpio56"; + drive-strength = <2>; + bias-disable; + }; +}; + +&qup_uart6_default { + pinmux { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + function = "qup6"; + }; + + cts { + pins = "gpio45"; + bias-disable; + }; + + rts-tx { + pins = "gpio46", "gpio47"; + drive-strength = <2>; + bias-disable; + }; + + rx { + pins = "gpio48"; + bias-pull-up; + }; +}; + +&qup_uart9_default { + pinconf-tx { + pins = "gpio4"; + drive-strength = <2>; + bias-disable; + }; + + pinconf-rx { + pins = "gpio5"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +&pm8998_gpio { + +}; + +&cci { + status = "okay"; +}; + +&camss { + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l26a_1p2>; + + status = "ok"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + csiphy0_ep: endpoint { + data-lanes = <0 1 2 3>; + remote-endpoint = <&ov8856_ep>; + }; + }; + }; +}; + +&cci_i2c0 { + camera@10 { + compatible = "ovti,ov8856"; + reg = <0x10>; + + // CAM0_RST_N + reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&cam0_default>; + + clocks = <&clock_camcc CAM_CC_MCLK0_CLK>; + clock-names = "xvclk"; + clock-frequency = <19200000>; + + /* The &vreg_s4a_1p8 trace is powered on as a, + * so it is represented by a fixed regulator. + * + * The 2.8V vdda-supply and 1.2V vddd-supply regulators + * both have to be enabled through the power management + * gpios. + */ + dovdd-supply = <&vreg_lvs1a_1p8>; + avdd-supply = <&cam0_avdd_2v8>; + dvdd-supply = <&cam0_dvdd_1v2>; + + status = "ok"; + + port { + ov8856_ep: endpoint { + link-frequencies = /bits/ 64 + <360000000 180000000>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&csiphy0_ep>; + }; + }; + }; +}; + +&cci_i2c1 { + camera@60 { + compatible = "ovti,ov7251"; + + // I2C address as per ov7251.txt linux documentation + reg = <0x60>; + + // CAM3_RST_N + enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cam3_default>; + + clocks = <&clock_camcc CAM_CC_MCLK3_CLK>; + clock-names = "xclk"; + clock-frequency = <24000000>; + + /* The &vreg_s4a_1p8 trace always powered on. + * + * The 2.8V vdda-supply regulator is enabled when the + * vreg_s4a_1p8 trace is pulled high. + * It too is represented by a fixed regulator. + * + * No 1.2V vddd-supply regulator is used. + */ + vdddo-supply = <&vreg_lvs1a_1p8>; + vdda-supply = <&cam3_avdd_2v8>; + + status = "disable"; + + port { + ov7251_ep: endpoint { + data-lanes = <0 1>; +// remote-endpoint = <&csiphy3_ep>; + }; + }; + }; +}; + +/* PINCTRL - additions to nodes defined in sdm845.dtsi */ +&qup_spi0_default { + config { + drive-strength = <6>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi new file mode 100644 index 000000000..e29216408 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi @@ -0,0 +1,614 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SDM845 LG G7 / V35 (judyln / judyp) common device tree + * + * Copyright (c) 2022, The Linux Foundation. All rights reserved. + */ + +#include +#include +#include + +#include "sdm845.dtsi" +#include "pm8998.dtsi" +#include "pmi8998.dtsi" + +/delete-node/ &adsp_mem; +/delete-node/ &cdsp_mem; +/delete-node/ &gpu_mem; +/delete-node/ &ipa_fw_mem; +/delete-node/ &mba_region; +/delete-node/ &mpss_region; +/delete-node/ &qseecom_mem; +/delete-node/ &rmtfs_mem; +/delete-node/ &slpi_mem; +/delete-node/ &spss_mem; +/delete-node/ &venus_mem; +/delete-node/ &wlan_msa_mem; + +/ { + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + qseecom_mem: memory@b2000000 { + reg = <0 0xb2000000 0 0x1800000>; + no-map; + }; + + gpu_mem: memory@8c415000 { + reg = <0 0x8c415000 0 0x2000>; + no-map; + }; + + ipa_fw_mem: memory@8c400000 { + reg = <0 0x8c400000 0 0x10000>; + no-map; + }; + + adsp_mem: memory@8c500000 { + reg = <0 0x8c500000 0 0x1e00000>; + no-map; + }; + + wlan_msa_mem: memory@8e300000 { + reg = <0 0x8e300000 0 0x100000>; + no-map; + }; + + mpss_region: memory@8e400000 { + reg = <0 0x8e400000 0 0x8900000>; + no-map; + }; + + venus_mem: memory@96d00000 { + reg = <0 0x96d00000 0 0x500000>; + no-map; + }; + + cdsp_mem: memory@97200000 { + reg = <0 0x97200000 0 0x800000>; + no-map; + }; + + mba_region: memory@97a00000 { + reg = <0 0x97a00000 0 0x200000>; + no-map; + }; + + slpi_mem: memory@97c00000 { + reg = <0 0x97c00000 0 0x1400000>; + no-map; + }; + + spss_mem: memory@99000000 { + reg = <0 0x99000000 0 0x100000>; + no-map; + }; + + /* Framebuffer region */ + memory@9d400000 { + reg = <0x0 0x9d400000 0x0 0x2400000>; + no-map; + }; + + /* rmtfs lower guard */ + memory@f0800000 { + reg = <0 0xf0800000 0 0x1000>; + no-map; + }; + + rmtfs_mem: memory@f0801000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0xf0801000 0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + + /* rmtfs upper guard */ + memory@f0a01000 { + reg = <0 0xf0a01000 0 0x1000>; + no-map; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&vol_up_pin_a>; + + label = "GPIO Buttons"; + + key-vol-up { + label = "Volume up"; + linux,code = ; + gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + /* + * Apparently RPMh does not provide support for PM8998 S4 because it + * is always-on; model it as a fixed regulator. + */ + vreg_s4a_1p8: pm8998-smps4-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; +}; + +&adsp_pas { + status = "okay"; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8998-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + vdd-s13-supply = <&vph_pwr>; + vdd-l1-l27-supply = <&vreg_s7a_1p025>; + vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>; + vdd-l3-l11-supply = <&vreg_s7a_1p025>; + vdd-l4-l5-supply = <&vreg_s7a_1p025>; + vdd-l6-supply = <&vph_pwr>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; + vdd-l9-supply = <&vreg_bob>; + vdd-l10-l23-l25-supply = <&vreg_bob>; + vdd-l13-l19-l21-supply = <&vreg_bob>; + vdd-l16-l28-supply = <&vreg_bob>; + vdd-l18-l22-supply = <&vreg_bob>; + vdd-l20-l24-supply = <&vreg_bob>; + vdd-l26-supply = <&vreg_s3a_1p35>; + vin-lvs-1-2-supply = <&vreg_s4a_1p8>; + + vreg_s2a_1p125: smps2 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + vreg_s3a_1p35: smps3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_s5a_2p04: smps5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7a_1p025: smps7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + + vdd_qusb_hs0: + vdda_hp_pcie_core: + vdda_mipi_csi0_0p9: + vdda_mipi_csi1_0p9: + vdda_mipi_csi2_0p9: + vdda_mipi_dsi0_pll: + vdda_mipi_dsi1_pll: + vdda_qlink_lv: + vdda_qlink_lv_ck: + vdda_qrefs_0p875: + vdda_pcie_core: + vdda_pll_cc_ebi01: + vdda_pll_cc_ebi23: + vdda_sp_sensor: + vdda_ufs1_core: + vdda_ufs2_core: + vdda_usb1_ss_core: + vdda_usb2_ss_core: + vreg_l1a_0p875: ldo1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + }; + + vddpx_10: + vreg_l2a_1p2: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + regulator-always-on; + }; + + vreg_l3a_1p0: ldo3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = ; + }; + + vdd_wcss_cx: + vdd_wcss_mx: + vdda_wcss_pll: + vreg_l5a_0p8: ldo5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = ; + }; + + vddpx_13: + vreg_l6a_1p8: ldo6 { + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <1856000>; + regulator-initial-mode = ; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l8a_1p2: ldo8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1248000>; + regulator-initial-mode = ; + }; + + vreg_l9a_1p8: ldo9 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = ; + }; + + vreg_l10a_1p8: ldo10 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = ; + }; + + vreg_l11a_1p0: ldo11 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1048000>; + regulator-initial-mode = ; + }; + + vdd_qfprom: + vdd_qfprom_sp: + vdda_apc1_cs_1p8: + vdda_gfx_cs_1p8: + vdda_qrefs_1p8: + vdda_qusb_hs0_1p8: + vddpx_11: + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vddpx_2: + vreg_l13a_2p95: ldo13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l14a_1p88: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1880000>; + regulator-initial-mode = ; + }; + + vreg_l15a_1p8: ldo15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l17a_1p3: ldo17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = ; + }; + + vreg_l18a_2p7: ldo18 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l20a_2p95: ldo20 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l21a_2p95: ldo21 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l22a_2p85: ldo22 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = ; + }; + + vreg_l23a_3p3: ldo23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + }; + + vdda_qusb_hs0_3p1: + vreg_l24a_3p075: ldo24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = ; + }; + + vreg_l25a_3p3: ldo25 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + }; + + vdda_hp_pcie_1p2: + vdda_hv_ebi0: + vdda_hv_ebi1: + vdda_hv_ebi2: + vdda_hv_ebi3: + vdda_mipi_csi_1p25: + vdda_mipi_dsi0_1p2: + vdda_mipi_dsi1_1p2: + vdda_pcie_1p2: + vdda_ufs1_1p2: + vdda_ufs2_1p2: + vdda_usb1_ss_1p2: + vdda_usb2_ss_1p2: + vreg_l26a_1p2: ldo26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l28a_3p0: ldo28 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_lvs1a_1p8: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + + regulators-1 { + compatible = "qcom,pmi8998-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3600000>; + regulator-initial-mode = ; + regulator-allow-bypass; + }; + }; + + regulators-2 { + compatible = "qcom,pm8005-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + + vreg_s3c_0p6: smps3 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <600000>; + }; + }; +}; + +&cdsp_pas { + status = "okay"; +}; + +&dispcc { + status = "disabled"; +}; + +&gcc { + protected-clocks = , + , + , + , + ; +}; + +&gpu { + status = "okay"; + + zap-shader { + memory-region = <&gpu_mem>; + }; +}; + +&ipa { + status = "okay"; + modem-init; +}; + +&mss_pil { + status = "okay"; +}; + +&pm8998_pon { + resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = ; + }; +}; + +&sdhc_2 { + status = "okay"; + + cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data &sd_card_det_n>; + + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vddpx_2>; +}; + +/* + * UFS works partially and only with clk_ignore_unused. + * Sometimes it crashes with I/O errors. + */ +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l20a_2p95>; + vcc-max-microamp = <600000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vdda_ufs1_core>; + vdda-pll-supply = <&vdda_ufs1_1p2>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + /* TODO: these devices have usb id pin */ + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdd-supply = <&vdda_usb1_ss_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = ; + qcom,preemphasis-level = ; + qcom,preemphasis-width = ; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vdda_usb1_ss_1p2>; + vdda-pll-supply = <&vdda_usb1_ss_core>; +}; + +/* PINCTRL - additions to nodes defined in sdm845.dtsi */ + +&tlmm { + gpio-reserved-ranges = <28 4>, <81 4>; + + sdc2_clk: sdc2-clk { + pinconf { + pins = "sdc2_clk"; + bias-disable; + + /* + * It seems that mmc_test reports errors if drive + * strength is not 16 on clk, cmd, and data pins. + * + * TODO: copy-pasted from mtp, try other values + * on these devices. + */ + drive-strength = <16>; + }; + }; + + sdc2_cmd: sdc2-cmd { + pinconf { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <16>; + }; + }; + + sdc2_data: sdc2-data { + pinconf { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <16>; + }; + }; + + sd_card_det_n: sd-card-det-n { + pinmux { + pins = "gpio126"; + function = "gpio"; + }; + + pinconf { + pins = "gpio126"; + bias-pull-up; + }; + }; +}; + +&pm8998_gpio { + vol_up_pin_a: vol-up-active-pins { + pins = "gpio6"; + function = "normal"; + input-enable; + bias-pull-up; + qcom,drive-strength = ; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts b/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts new file mode 100644 index 000000000..7d967a104 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts @@ -0,0 +1,68 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SDM845 LG G7 (judyln) device tree. + * + * Copyright (c) 2022, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include "sdm845-lg-common.dtsi" + +/ { + model = "LG G7 ThinQ"; + compatible = "lg,judyln", "qcom,sdm845"; + + chosen { + framebuffer@9d400000 { + compatible = "simple-framebuffer"; + reg = <0x0 0x9d400000 0x0 (1440 * 3120 * 4)>; + width = <1440>; + height = <3120>; + stride = <(1440 * 4)>; + format = "a8r8g8b8"; + lab-supply = <&lab>; + ibb-supply = <&ibb>; + }; + }; + + /* Additional ThinQ key */ + gpio-keys { + pinctrl-0 = <&vol_up_pin_a &thinq_key_default>; + + key-thinq { + label = "ThinQ"; + linux,code = ; + interrupt-parent = <&tlmm>; + interrupts = <89 IRQ_TYPE_LEVEL_LOW>; + }; + }; +}; + +&adsp_pas { + firmware-name = "qcom/sdm845/judyln/adsp.mbn"; +}; + +&cdsp_pas { + firmware-name = "qcom/sdm845/judyln/cdsp.mbn"; +}; + +&gpu { + zap-shader { + firmware-name = "qcom/sdm845/judyln/a630_zap.mbn"; + }; +}; + +&mss_pil { + firmware-name = "qcom/sdm845/judyln/mba.mbn", "qcom/sdm845/judyln/modem.mbn"; +}; + +&tlmm { + thinq_key_default: thinq-key-default { + pins = "gpio89"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts b/arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts new file mode 100644 index 000000000..d17d4d4d5 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SDM845 LG V35 (judyp) device tree. + * + * Copyright (c) 2022, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include "sdm845-lg-common.dtsi" + +/ { + model = "LG V35 ThinQ"; + compatible = "lg,judyp", "qcom,sdm845"; + + chosen { + framebuffer@9d400000 { + compatible = "simple-framebuffer"; + reg = <0x0 0x9d400000 0x0 (1440 * 2880 * 4)>; + width = <1440>; + height = <2880>; + stride = <(1440 * 4)>; + format = "a8r8g8b8"; + }; + }; +}; + +&adsp_pas { + firmware-name = "qcom/sdm845/judyp/adsp.mbn"; +}; + +&cdsp_pas { + firmware-name = "qcom/sdm845/judyp/cdsp.mbn"; +}; + +&gpu { + zap-shader { + firmware-name = "qcom/sdm845/judyp/a630_zap.mbn"; + }; +}; + +&mss_pil { + firmware-name = "qcom/sdm845/judyp/mba.mbn", "qcom/sdm845/judyp/modem.mbn"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts new file mode 100644 index 000000000..b47e333aa --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts @@ -0,0 +1,788 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SDM845 MTP board device tree source + * + * Copyright (c) 2018, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include +#include "sdm845.dtsi" +#include "pm8998.dtsi" +#include "pmi8998.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SDM845 MTP"; + compatible = "qcom,sdm845-mtp", "qcom,sdm845"; + + aliases { + serial0 = &uart9; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + /* + * Apparently RPMh does not provide support for PM8998 S4 because it + * is always-on; model it as a fixed regulator. + */ + vreg_s4a_1p8: pm8998-smps4 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; + + thermal-zones { + xo_thermal: xo-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&pm8998_adc_tm 1>; + + trips { + trip-point { + temperature = <125000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + }; + + msm_thermal: msm-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&pm8998_adc_tm 2>; + + trips { + trip-point { + temperature = <125000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + }; + + pa_thermal: pa-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&pm8998_adc_tm 3>; + + trips { + trip-point { + temperature = <125000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + }; + + quiet_thermal: quiet-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&pm8998_adc_tm 4>; + + trips { + trip-point { + temperature = <125000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + }; + }; +}; + +&adsp_pas { + status = "okay"; + firmware-name = "qcom/sdm845/adsp.mdt"; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8998-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + vdd-s13-supply = <&vph_pwr>; + vdd-l1-l27-supply = <&vreg_s7a_1p025>; + vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>; + vdd-l3-l11-supply = <&vreg_s7a_1p025>; + vdd-l4-l5-supply = <&vreg_s7a_1p025>; + vdd-l6-supply = <&vph_pwr>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; + vdd-l9-supply = <&vreg_bob>; + vdd-l10-l23-l25-supply = <&vreg_bob>; + vdd-l13-l19-l21-supply = <&vreg_bob>; + vdd-l16-l28-supply = <&vreg_bob>; + vdd-l18-l22-supply = <&vreg_bob>; + vdd-l20-l24-supply = <&vreg_bob>; + vdd-l26-supply = <&vreg_s3a_1p35>; + vin-lvs-1-2-supply = <&vreg_s4a_1p8>; + + vreg_s2a_1p125: smps2 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + vreg_s3a_1p35: smps3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_s5a_2p04: smps5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7a_1p025: smps7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + + vdd_qusb_hs0: + vdda_hp_pcie_core: + vdda_mipi_csi0_0p9: + vdda_mipi_csi1_0p9: + vdda_mipi_csi2_0p9: + vdda_mipi_dsi0_pll: + vdda_mipi_dsi1_pll: + vdda_qlink_lv: + vdda_qlink_lv_ck: + vdda_qrefs_0p875: + vdda_pcie_core: + vdda_pll_cc_ebi01: + vdda_pll_cc_ebi23: + vdda_sp_sensor: + vdda_ufs1_core: + vdda_ufs2_core: + vdda_usb1_ss_core: + vdda_usb2_ss_core: + vreg_l1a_0p875: ldo1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + }; + + vddpx_10: + vreg_l2a_1p2: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + regulator-always-on; + }; + + vreg_l3a_1p0: ldo3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = ; + }; + + vdd_wcss_cx: + vdd_wcss_mx: + vdda_wcss_pll: + vreg_l5a_0p8: ldo5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = ; + }; + + vddpx_13: + vreg_l6a_1p8: ldo6 { + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <1856000>; + regulator-initial-mode = ; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l8a_1p2: ldo8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1248000>; + regulator-initial-mode = ; + }; + + vreg_l9a_1p8: ldo9 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = ; + }; + + vreg_l10a_1p8: ldo10 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = ; + }; + + vreg_l11a_1p0: ldo11 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1048000>; + regulator-initial-mode = ; + }; + + vdd_qfprom: + vdd_qfprom_sp: + vdda_apc1_cs_1p8: + vdda_gfx_cs_1p8: + vdda_qrefs_1p8: + vdda_qusb_hs0_1p8: + vddpx_11: + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vddpx_2: + vreg_l13a_2p95: ldo13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l14a_1p88: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l15a_1p8: ldo15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l16a_2p7: ldo16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + regulator-initial-mode = ; + }; + + vreg_l17a_1p3: ldo17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = ; + }; + + vreg_l18a_2p7: ldo18 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l19a_3p0: ldo19 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = ; + }; + + vreg_l20a_2p95: ldo20 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l21a_2p95: ldo21 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l22a_2p85: ldo22 { + regulator-min-microvolt = <2864000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + }; + + vreg_l23a_3p3: ldo23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + }; + + vdda_qusb_hs0_3p1: + vreg_l24a_3p075: ldo24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = ; + }; + + vreg_l25a_3p3: ldo25 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + }; + + vdda_hp_pcie_1p2: + vdda_hv_ebi0: + vdda_hv_ebi1: + vdda_hv_ebi2: + vdda_hv_ebi3: + vdda_mipi_csi_1p25: + vdda_mipi_dsi0_1p2: + vdda_mipi_dsi1_1p2: + vdda_pcie_1p2: + vdda_ufs1_1p2: + vdda_ufs2_1p2: + vdda_usb1_ss_1p2: + vdda_usb2_ss_1p2: + vreg_l26a_1p2: ldo26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l28a_3p0: ldo28 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_lvs1a_1p8: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + + regulators-1 { + compatible = "qcom,pmi8998-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3600000>; + regulator-initial-mode = ; + regulator-allow-bypass; + }; + }; + + regulators-2 { + compatible = "qcom,pm8005-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + + vreg_s3c_0p6: smps3 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <600000>; + }; + }; +}; + +&cdsp_pas { + status = "okay"; + firmware-name = "qcom/sdm845/cdsp.mdt"; +}; + +&dsi0 { + status = "okay"; + vdda-supply = <&vdda_mipi_dsi0_1p2>; + + qcom,dual-dsi-mode; + qcom,master-dsi; + + ports { + port@1 { + endpoint { + remote-endpoint = <&truly_in_0>; + data-lanes = <0 1 2 3>; + }; + }; + }; + + panel@0 { + compatible = "truly,nt35597-2K-display"; + reg = <0>; + vdda-supply = <&vreg_l14a_1p88>; + + reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; + mode-gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + truly_in_0: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + truly_in_1: endpoint { + remote-endpoint = <&dsi1_out>; + }; + }; + }; + }; +}; + +&dsi0_phy { + status = "okay"; + vdds-supply = <&vdda_mipi_dsi0_pll>; +}; + +&dsi1 { + status = "okay"; + vdda-supply = <&vdda_mipi_dsi1_1p2>; + + qcom,dual-dsi-mode; + + /* DSI1 is slave, so use DSI0 clocks */ + assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + + ports { + port@1 { + endpoint { + remote-endpoint = <&truly_in_1>; + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&dsi1_phy { + status = "okay"; + vdds-supply = <&vdda_mipi_dsi1_pll>; +}; + +&gcc { + protected-clocks = , + , + , + , + ; +}; + +&gmu { + status = "okay"; +}; + +&gpu { + status = "okay"; + + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sdm845/a630_zap.mbn"; + }; +}; + +&i2c10 { + status = "okay"; + clock-frequency = <400000>; +}; + +&ipa { + status = "okay"; + memory-region = <&ipa_fw_mem>; +}; + +&mdss { + status = "okay"; +}; + +&mss_pil { + status = "okay"; + firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn"; +}; + +&pm8998_adc { + adc-chan@4c { + reg = ; + label = "xo_therm"; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + adc-chan@4d { + reg = ; + label = "msm_therm"; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + adc-chan@4f { + reg = ; + label = "pa_therm1"; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + adc-chan@51 { + reg = ; + label = "quiet_therm"; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + adc-chan@83 { + reg = ; + label = "vph_pwr"; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + adc-chan@85 { + reg = ; + label = "vcoin"; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&pm8998_adc_tm { + status = "okay"; + + xo-thermistor@1 { + reg = <1>; + io-channels = <&pm8998_adc ADC5_XO_THERM_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + msm-thermistor@2 { + reg = <2>; + io-channels = <&pm8998_adc ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + pa-thermistor@3 { + reg = <3>; + io-channels = <&pm8998_adc ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + quiet-thermistor@4 { + reg = <4>; + io-channels = <&pm8998_adc ADC5_AMUX_THM5_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data &sd_card_det_n>; + + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vddpx_2>; + + cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>; +}; + +&uart9 { + status = "okay"; +}; + +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l20a_2p95>; + vcc-max-microamp = <600000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vdda_ufs1_core>; + vdda-pll-supply = <&vdda_ufs1_1p2>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + /* Until we have Type C hooked up we'll force this as peripheral. */ + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdd-supply = <&vdda_usb1_ss_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = ; + qcom,preemphasis-level = ; + qcom,preemphasis-width = ; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vdda_usb1_ss_1p2>; + vdda-pll-supply = <&vdda_usb1_ss_core>; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3 { + /* + * Though the USB block on SDM845 can support host, there's no vbus + * signal for this port on MTP. Thus (unless you have a non-compliant + * hub that works without vbus) the only sensible thing is to force + * peripheral mode. + */ + dr_mode = "peripheral"; +}; + +&usb_2_hsphy { + status = "okay"; + + vdd-supply = <&vdda_usb2_ss_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = ; +}; + +&usb_2_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vdda_usb2_ss_1p2>; + vdda-pll-supply = <&vdda_usb2_ss_core>; +}; + +&venus { + status = "okay"; +}; + +&wifi { + status = "okay"; + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; + + qcom,snoc-host-cap-8bit-quirk; +}; + +/* PINCTRL - additions to nodes defined in sdm845.dtsi */ + +&qup_i2c10_default { + pinconf { + pins = "gpio55", "gpio56"; + drive-strength = <2>; + bias-disable; + }; +}; + +&qup_uart9_default { + pinconf-tx { + pins = "gpio4"; + drive-strength = <2>; + bias-disable; + }; + + pinconf-rx { + pins = "gpio5"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <81 4>; + + sdc2_clk: sdc2-clk { + pinconf { + pins = "sdc2_clk"; + bias-disable; + + /* + * It seems that mmc_test reports errors if drive + * strength is not 16 on clk, cmd, and data pins. + */ + drive-strength = <16>; + }; + }; + + sdc2_cmd: sdc2-cmd { + pinconf { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <16>; + }; + }; + + sdc2_data: sdc2-data { + pinconf { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <16>; + }; + }; + + sd_card_det_n: sd-card-det-n { + pinmux { + pins = "gpio126"; + function = "gpio"; + }; + + pinconf { + pins = "gpio126"; + bias-pull-up; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi new file mode 100644 index 000000000..0713b774a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi @@ -0,0 +1,672 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SDM845 OnePlus 6(T) (enchilada / fajita) common device tree source + * + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include +#include + +#include "sdm845.dtsi" +#include "pm8998.dtsi" +#include "pmi8998.dtsi" + +/delete-node/ &rmtfs_mem; + +/ { + aliases { + serial0 = &uart9; + hsuart0 = &uart6; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + label = "Volume keys"; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&volume_down_gpio &volume_up_gpio>; + + key-vol-down { + label = "Volume down"; + linux,code = ; + gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + }; + + key-vol-up { + label = "Volume up"; + linux,code = ; + gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + }; + }; + + reserved-memory { + /* The rmtfs_mem needs to be guarded due to "XPU limitations" + * it is otherwise possible for an allocation adjacent to the + * rmtfs_mem region to trigger an XPU violation, causing a crash. + */ + rmtfs_lower_guard: rmtfs-lower-guard@f5b00000 { + no-map; + reg = <0 0xf5b00000 0 0x1000>; + }; + /* + * The rmtfs memory region in downstream is 'dynamically allocated' + * but given the same address every time. Hard code it as this address is + * where the modem firmware expects it to be. + */ + rmtfs_mem: rmtfs-mem@f5b01000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0xf5b01000 0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + rmtfs_upper_guard: rmtfs-upper-guard@f5d01000 { + no-map; + reg = <0 0xf5d01000 0 0x1000>; + }; + + /* + * It seems like reserving the old rmtfs_mem region is also needed to prevent + * random crashes which are most likely modem related, more testing needed. + */ + removed_region: removed-region@88f00000 { + no-map; + reg = <0 0x88f00000 0 0x1c00000>; + }; + + ramoops: ramoops@ac300000 { + compatible = "ramoops"; + reg = <0 0xac300000 0 0x400000>; + record-size = <0x40000>; + console-size = <0x40000>; + ftrace-size = <0x40000>; + pmsg-size = <0x200000>; + ecc-size = <16>; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + /* + * Apparently RPMh does not provide support for PM8998 S4 because it + * is always-on; model it as a fixed regulator. + */ + vreg_s4a_1p8: pm8998-smps4 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; + + /* + * The touchscreen regulator seems to be controlled somehow by a gpio. + * Model it as a fixed regulator and keep it on. Without schematics we + * don't know how this is actually wired up... + */ + ts_1p8_supply: ts-1p8-regulator { + compatible = "regulator-fixed"; + regulator-name = "ts_1p8_supply"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 88 0>; + enable-active-high; + regulator-boot-on; + }; +}; + +&adsp_pas { + status = "okay"; + firmware-name = "qcom/sdm845/oneplus6/adsp.mbn"; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8998-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + vdd-s13-supply = <&vph_pwr>; + vdd-l1-l27-supply = <&vreg_s7a_1p025>; + vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>; + vdd-l3-l11-supply = <&vreg_s7a_1p025>; + vdd-l4-l5-supply = <&vreg_s7a_1p025>; + vdd-l6-supply = <&vph_pwr>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; + vdd-l9-supply = <&vreg_bob>; + vdd-l10-l23-l25-supply = <&vreg_bob>; + vdd-l13-l19-l21-supply = <&vreg_bob>; + vdd-l16-l28-supply = <&vreg_bob>; + vdd-l18-l22-supply = <&vreg_bob>; + vdd-l20-l24-supply = <&vreg_bob>; + vdd-l26-supply = <&vreg_s3a_1p35>; + vin-lvs-1-2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p35: smps3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_s5a_2p04: smps5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7a_1p025: smps7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + + vdda_mipi_dsi0_pll: + vdda_qlink_lv: + vdda_ufs1_core: + vdda_usb1_ss_core: + vreg_l1a_0p875: ldo1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + }; + + vreg_l2a_1p2: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + regulator-always-on; + }; + + vreg_l5a_0p8: ldo5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = ; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vdda_qusb_hs0_1p8: + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l14a_1p88: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + regulator-always-on; + }; + + vreg_l17a_1p3: ldo17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = ; + }; + + vreg_l20a_2p95: ldo20 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l23a_3p3: ldo23 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + }; + + vdda_qusb_hs0_3p1: + vreg_l24a_3p075: ldo24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = ; + }; + + vreg_l25a_3p3: ldo25 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + }; + + vdda_mipi_dsi0_1p2: + vdda_ufs1_1p2: + vreg_l26a_1p2: ldo26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l28a_3p0: ldo28 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + }; + + regulators-1 { + compatible = "qcom,pmi8998-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3600000>; + regulator-initial-mode = ; + regulator-allow-bypass; + }; + }; + + regulators-2 { + compatible = "qcom,pm8005-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + + vreg_s3c_0p6: smps3 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <600000>; + }; + }; +}; + +&cdsp_pas { + status = "okay"; + firmware-name = "qcom/sdm845/oneplus6/cdsp.mbn"; +}; + +&dsi0 { + status = "okay"; + vdda-supply = <&vdda_mipi_dsi0_1p2>; + + /* + * Both devices use different panels but all other properties + * are common. Compatible line is declared in device dts. + */ + display_panel: panel@0 { + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + vddio-supply = <&vreg_l14a_1p88>; + + reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&panel_reset_pins &panel_te_pin &panel_esd_pin>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; +}; + +&dsi0_out { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; +}; + +&dsi0_phy { + status = "okay"; + vdds-supply = <&vdda_mipi_dsi0_pll>; +}; + +&gcc { + protected-clocks = , + , + , + , + ; +}; + +&gmu { + status = "okay"; +}; + +&gpu { + status = "okay"; + + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sdm845/oneplus6/a630_zap.mbn"; + }; +}; + +&i2c10 { + status = "okay"; + clock-frequency = <100000>; + + bq27441_fg: bq27441-battery@55 { + compatible = "ti,bq27411"; + status = "okay"; + reg = <0x55>; + }; +}; + +&i2c12 { + status = "okay"; + clock-frequency = <400000>; + + synaptics-rmi4-i2c@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_default_pins>; + + vdd-supply = <&vreg_l28a_3p0>; + vio-supply = <&ts_1p8_supply>; + + syna,reset-delay-ms = <200>; + syna,startup-delay-ms = <200>; + + rmi4-f01@1 { + reg = <0x01>; + syna,nosleep-mode = <1>; + }; + + rmi4_f12: rmi4-f12@12 { + reg = <0x12>; + touchscreen-x-mm = <68>; + touchscreen-y-mm = <144>; + syna,sensor-type = <1>; + syna,rezero-wait-ms = <200>; + }; + }; +}; + +&ipa { + status = "okay"; + + memory-region = <&ipa_fw_mem>; + firmware-name = "qcom/sdm845/oneplus6/ipa_fws.mbn"; +}; + +&mdss { + status = "okay"; +}; + +/* Modem/wifi*/ +&mss_pil { + status = "okay"; + firmware-name = "qcom/sdm845/oneplus6/mba.mbn", "qcom/sdm845/oneplus6/modem.mbn"; +}; + +&pm8998_gpio { + volume_down_gpio: pm8998-gpio5-state { + pinconf { + pins = "gpio5"; + function = "normal"; + input-enable; + bias-pull-up; + qcom,drive-strength = <0>; + }; + }; + + volume_up_gpio: pm8998-gpio6-state { + pinconf { + pins = "gpio6"; + function = "normal"; + input-enable; + bias-pull-up; + qcom,drive-strength = <0>; + }; + }; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qup_i2c12_default { + mux { + pins = "gpio49", "gpio50"; + function = "qup12"; + drive-strength = <2>; + bias-disable; + }; +}; + +&qup_i2c10_default { + pinconf { + pins = "gpio55", "gpio56"; + drive-strength = <2>; + bias-disable; + }; +}; + +&qup_uart9_default { + pinconf-tx { + pins = "gpio4"; + drive-strength = <2>; + bias-disable; + }; + + pinconf-rx { + pins = "gpio5"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +/* + * Prevent garbage data on bluetooth UART lines + */ +&qup_uart6_default { + pinmux { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + function = "qup6"; + }; + + cts { + pins = "gpio45"; + bias-pull-down; + }; + + rts-tx { + pins = "gpio46", "gpio47"; + drive-strength = <2>; + bias-disable; + }; + + rx { + pins = "gpio48"; + bias-pull-up; + }; +}; + +&uart6 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + /* + * This path is relative to the qca/ + * subdir under lib/firmware. + */ + firmware-name = "oneplus6/crnv21.bin"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + max-speed = <3200000>; + }; +}; + +&uart9 { + label = "LS-UART1"; + status = "okay"; +}; + +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l20a_2p95>; + vcc-max-microamp = <600000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vdda_ufs1_core>; + vdda-pll-supply = <&vdda_ufs1_1p2>; +}; + +&usb_1 { + status = "okay"; + + /* + * disable USB3 clock requirement as the device only supports + * USB2. + */ + qcom,select-utmi-as-pipe-clk; +}; + +&usb_1_dwc3 { + /* + * We don't have the capability to switch modes yet. + */ + dr_mode = "peripheral"; + + /* fastest mode for USB 2 */ + maximum-speed = "high-speed"; + + /* Remove USB3 phy as it's unused on this device. */ + phys = <&usb_1_hsphy>; + phy-names = "usb2-phy"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdd-supply = <&vdda_usb1_ss_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = ; + qcom,preemphasis-level = ; + qcom,preemphasis-width = ; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <81 4>; + + tri_state_key_default: tri_state_key_default { + mux { + pins = "gpio40", "gpio42", "gpio26"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + + ts_default_pins: ts-int { + mux { + pins = "gpio99", "gpio125"; + function = "gpio"; + drive-strength = <16>; + bias-pull-up; + }; + }; + + panel_reset_pins: panel-reset { + mux { + pins = "gpio6", "gpio25", "gpio26"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + }; + + panel_te_pin: panel-te { + mux { + pins = "gpio10"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-disable; + input-enable; + }; + }; + + panel_esd_pin: panel-esd { + mux { + pins = "gpio30"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + input-enable; + }; + }; +}; + +&venus { + status = "okay"; + firmware-name = "qcom/sdm845/oneplus6/venus.mbn"; +}; + +&wifi { + status = "okay"; + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; + vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; + + qcom,snoc-host-cap-8bit-quirk; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts new file mode 100644 index 000000000..bf2cf92e8 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SDM845 OnePlus 6 (enchilada) device tree. + * + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +#include "sdm845-oneplus-common.dtsi" + +/ { + model = "OnePlus 6"; + compatible = "oneplus,enchilada", "qcom,sdm845"; + chassis-type = "handset"; + qcom,msm-id = <0x141 0x20001>; + qcom,board-id = <8 0 17819 22>; + + battery: battery { + compatible = "simple-battery"; + + charge-full-design-microamp-hours = <3300000>; + voltage-min-design-microvolt = <3400000>; + voltage-max-design-microvolt = <4400000>; + }; +}; + +&display_panel { + status = "okay"; + + compatible = "samsung,sofef00"; +}; + +&bq27441_fg { + monitored-battery = <&battery>; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts new file mode 100644 index 000000000..1b6b5bf36 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts @@ -0,0 +1,38 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SDM845 OnePlus 6T (fajita) device tree. + * + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +#include "sdm845-oneplus-common.dtsi" + +/ { + model = "OnePlus 6T"; + compatible = "oneplus,fajita", "qcom,sdm845"; + chassis-type = "handset"; + qcom,msm-id = <0x141 0x20001>; + qcom,board-id = <8 0 18801 41>; + + battery: battery { + compatible = "simple-battery"; + + charge-full-design-microamp-hours = <3700000>; + voltage-min-design-microvolt = <3400000>; + voltage-max-design-microvolt = <4400000>; + }; +}; + +&display_panel { + status = "okay"; + + compatible = "samsung,s6e3fc2x01"; +}; + +&bq27441_fg { + monitored-battery = <&battery>; +}; + +&rmi4_f12 { + touchscreen-y-mm = <148>; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts new file mode 100644 index 000000000..b65c35865 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts @@ -0,0 +1,765 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2022, Alexander Martinz + * Copyright (c) 2022, Caleb Connolly + * Copyright (c) 2022, Dylan Van Assche + */ + +/dts-v1/; + +#include +#include +#include +#include "sdm845.dtsi" +#include "pm8998.dtsi" +#include "pmi8998.dtsi" + +/ { + model = "SHIFT SHIFT6mq"; + compatible = "shift,axolotl", "qcom,sdm845"; + qcom,msm-id = <321 0x20001>; + qcom,board-id = <11 0>; + + aliases { + display0 = &framebuffer0; + serial0 = &uart9; + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + stdout-path = "serial0"; + + /* Use framebuffer setup by the bootloader. */ + framebuffer0: framebuffer@9d400000 { + compatible = "simple-framebuffer"; + reg = <0x0 0x9d400000 0x0 (1080 * 2160 * 4)>; + width = <1080>; + height = <2160>; + stride = <(1080 * 4)>; + format = "a8r8g8b8"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&volume_up_gpio>; + + key-vol-up { + label = "volume_up"; + linux,code = ; + gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + }; + }; + + reserved-memory { + framebuffer_region@9d400000 { + reg = <0x0 0x9d400000 0x0 (1080 * 2160 * 4)>; + no-map; + }; + + ramoops: ramoops@b0000000 { + compatible = "ramoops"; + reg = <0 0xb0000000 0 0x00400000>; + record-size = <0x40000>; + console-size = <0x40000>; + ftrace-size = <0x40000>; + pmsg-size = <0x200000>; + ecc-size = <0x0>; + }; + }; + + battery: battery { + compatible = "simple-battery"; + + charge-full-design-microamp-hours = <3850000>; + voltage-min-design-microvolt = <3600000>; + voltage-max-design-microvolt = <4400000>; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + vreg_s4a_1p8: pm8998-smps4 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; +}; + +&adsp_pas { + status = "okay"; + firmware-name = "qcom/sdm845/axolotl/adsp.mbn"; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8998-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + vdd-s13-supply = <&vph_pwr>; + vdd-l1-l27-supply = <&vreg_s7a_1p025>; + vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>; + vdd-l3-l11-supply = <&vreg_s7a_1p025>; + vdd-l4-l5-supply = <&vreg_s7a_1p025>; + vdd-l6-supply = <&vph_pwr>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; + vdd-l9-supply = <&vreg_bob>; + vdd-l10-l23-l25-supply = <&vreg_bob>; + vdd-l13-l19-l21-supply = <&vreg_bob>; + vdd-l16-l28-supply = <&vreg_bob>; + vdd-l18-l22-supply = <&vreg_bob>; + vdd-l20-l24-supply = <&vreg_bob>; + vdd-l26-supply = <&vreg_s3a_1p35>; + vin-lvs-1-2-supply = <&vreg_s4a_1p8>; + + vreg_s2a_1p125: smps2 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + vreg_s3a_1p35: smps3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_s5a_2p04: smps5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7a_1p025: smps7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + + vdd_qusb_hs0: + vdda_hp_pcie_core: + vdda_mipi_csi0_0p9: + vdda_mipi_csi1_0p9: + vdda_mipi_csi2_0p9: + vdda_mipi_dsi0_pll: + vdda_mipi_dsi1_pll: + vdda_qlink_lv: + vdda_qlink_lv_ck: + vdda_qrefs_0p875: + vdda_pcie_core: + vdda_pll_cc_ebi01: + vdda_pll_cc_ebi23: + vdda_sp_sensor: + vdda_ufs1_core: + vdda_ufs2_core: + vdda_usb1_ss_core: + vdda_usb2_ss_core: + vreg_l1a_0p875: ldo1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + }; + + vddpx_10: + vreg_l2a_1p2: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + regulator-always-on; + }; + + vreg_l3a_1p0: ldo3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = ; + }; + + vdd_wcss_cx: + vdd_wcss_mx: + vdda_wcss_pll: + vreg_l5a_0p8: ldo5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = ; + }; + + vddpx_13: + vreg_l6a_1p8: ldo6 { + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <1856000>; + regulator-initial-mode = ; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l8a_1p2: ldo8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1248000>; + regulator-initial-mode = ; + }; + + vreg_l9a_1p8: ldo9 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = ; + }; + + vreg_l10a_1p8: ldo10 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = ; + }; + + vreg_l11a_1p0: ldo11 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1048000>; + regulator-initial-mode = ; + }; + + vdd_qfprom: + vdd_qfprom_sp: + vdda_apc1_cs_1p8: + vdda_gfx_cs_1p8: + vdda_qrefs_1p8: + vdda_qusb_hs0_1p8: + vddpx_11: + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vddpx_2: + vreg_l13a_2p95: ldo13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l14a_1p88: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l15a_1p8: ldo15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l16a_2p7: ldo16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + regulator-initial-mode = ; + }; + + vreg_l17a_1p3: ldo17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = ; + }; + + vreg_l18a_2p7: ldo18 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l19a_3p0: ldo19 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = ; + }; + + vreg_l20a_2p95: ldo20 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l21a_2p95: ldo21 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l22a_2p85: ldo22 { + regulator-min-microvolt = <2864000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + }; + + vreg_l23a_3p3: ldo23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + }; + + vdda_qusb_hs0_3p1: + vreg_l24a_3p075: ldo24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = ; + }; + + vreg_l25a_3p3: ldo25 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + }; + + vdda_hp_pcie_1p2: + vdda_hv_ebi0: + vdda_hv_ebi1: + vdda_hv_ebi2: + vdda_hv_ebi3: + vdda_mipi_csi_1p25: + vdda_mipi_dsi0_1p2: + vdda_mipi_dsi1_1p2: + vdda_pcie_1p2: + vdda_ufs1_1p2: + vdda_ufs2_1p2: + vdda_usb1_ss_1p2: + vdda_usb2_ss_1p2: + vreg_l26a_1p2: ldo26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l28a_3p0: ldo28 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_lvs1a_1p8: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + + regulators-1 { + compatible = "qcom,pmi8998-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3600000>; + regulator-initial-mode = ; + regulator-allow-bypass; + }; + }; + + regulators-2 { + compatible = "qcom,pm8005-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + + vreg_s3c_0p6: smps3 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <600000>; + }; + }; +}; + +&cdsp_pas { + status = "okay"; + firmware-name = "qcom/sdm845/axolotl/cdsp.mbn"; +}; + +&dsi0 { + status = "okay"; + vdda-supply = <&vdda_mipi_dsi0_1p2>; + + panel@0 { + compatible = "visionox,rm69299-shift"; + status = "okay"; + reg = <0>; + vdda-supply = <&vreg_l14a_1p88>; + vdd3p3-supply = <&vreg_l28a_3p0>; + + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sde_dsi_active &sde_te_active>; + pinctrl-1 = <&sde_dsi_suspend &sde_te_suspend>; + + port { + panel_in_0: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; +}; + +&dsi0_out { + remote-endpoint = <&panel_in_0>; + data-lanes = <0 1 2 3>; +}; + +&dsi0_phy { + status = "okay"; + vdds-supply = <&vdda_mipi_dsi0_pll>; +}; + +&gcc { + protected-clocks = , + , + , + , + ; +}; + +&gmu { + status = "okay"; +}; + +&gpu { + status = "okay"; + + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sdm845/axolotl/a630_zap.mbn"; + }; +}; + +&i2c5 { + status = "okay"; + + touchscreen@38 { + compatible = "focaltech,fts8719"; + reg = <0x38>; + wakeup-source; + interrupt-parent = <&tlmm>; + interrupts = <125 0x2>; + vdd-supply = <&vreg_l28a_3p0>; + vcc-i2c-supply = <&vreg_l14a_1p88>; + + pinctrl-names = "default", "suspend"; + pinctrl-0 = <&ts_int_active &ts_reset_active>; + pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>; + + reset-gpio = <&tlmm 99 GPIO_ACTIVE_HIGH>; + irq-gpio = <&tlmm 125 GPIO_TRANSITORY>; + touchscreen-size-x = <1080>; + touchscreen-size-y = <2160>; + focaltech,max-touch-number = <5>; + }; +}; + +&ipa { + status = "okay"; + + memory-region = <&ipa_fw_mem>; + firmware-name = "qcom/sdm845/axolotl/ipa_fws.mbn"; +}; + +&mdss { + status = "okay"; +}; + +&mss_pil { + status = "okay"; + firmware-name = "qcom/sdm845/axolotl/mba.mbn", "qcom/sdm845/axolotl/modem.mbn"; +}; + +&pm8998_gpio { + volume_up_gpio: pm8998-gpio6-state { + pinconf { + pins = "gpio6"; + function = "normal"; + input-enable; + bias-pull-up; + qcom,drive-strength = <0>; + }; + }; +}; + +&pm8998_pon { + volume_down_resin: resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = ; + }; +}; + +&pmi8998_lpg { + status = "okay"; + + multi-led { + color = ; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@3 { + reg = <3>; + color = ; + }; + + led@4 { + reg = <4>; + color = ; + }; + + led@5 { + reg = <5>; + color = ; + }; + }; +}; + +&qup_uart9_default { + pinconf-rx { + pins = "gpio5"; + drive-strength = <2>; + bias-pull-up; + }; + + pinconf-tx { + pins = "gpio4"; + drive-strength = <2>; + bias-disable; + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <81 4>; + + sde_dsi_active: sde-dsi-active { + mux { + pins = "gpio6", "gpio11"; + function = "gpio"; + }; + + config { + pins = "gpio6", "gpio11"; + drive-strength = <8>; + bias-disable; + }; + }; + + sde_dsi_suspend: sde-dsi-suspend { + mux { + pins = "gpio6", "gpio11"; + function = "gpio"; + }; + + config { + pins = "gpio6", "gpio11"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + sde_te_active: sde-te-active { + mux { + pins = "gpio10"; + function = "mdp_vsync"; + }; + + config { + pins = "gpio10"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + sde_te_suspend: sde-te-suspend { + mux { + pins = "gpio10"; + function = "mdp_vsync"; + }; + + config { + pins = "gpio10"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + ts_int_active: ts-int-active { + mux { + pins = "gpio125"; + function = "gpio"; + }; + + config { + pins = "gpio125"; + drive-strength = <8>; + bias-pull-up; + input-enable; + }; + }; + + ts_int_suspend: ts-int-suspend { + mux { + pins = "gpio125"; + function = "gpio"; + }; + + config { + pins = "gpio125"; + drive-strength = <2>; + bias-pull-down; + input-enable; + }; + }; + + ts_reset_active: ts-reset-active { + mux { + pins = "gpio99"; + function = "gpio"; + }; + + config { + pins = "gpio99"; + drive-strength = <8>; + bias-pull-up; + }; + }; + + ts_reset_suspend: ts-reset-suspend { + mux { + pins = "gpio99"; + function = "gpio"; + }; + + config { + pins = "gpio99"; + drive-strength = <2>; + bias-pull-down; + }; + }; +}; + +&uart6 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + max-speed = <3200000>; + }; +}; + +&uart9 { + status = "okay"; +}; + +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l20a_2p95>; + vcc-max-microamp = <600000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vdda_ufs1_core>; + vdda-pll-supply = <&vdda_ufs1_1p2>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdd-supply = <&vreg_l1a_0p875>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; + vdda-pll-supply = <&vreg_l12a_1p8>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l26a_1p2>; + vdda-pll-supply = <&vreg_l1a_0p875>; +}; + +&venus { + status = "okay"; + firmware-name = "qcom/sdm845/axolotl/venus.mbn"; +}; + +&wifi { + status = "okay"; + + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; + vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; + + qcom,snoc-host-cap-8bit-quirk; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts new file mode 100644 index 000000000..34f84f1f1 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio + */ + +/dts-v1/; + +#include "sdm845-sony-xperia-tama.dtsi" + +/ { + model = "Sony Xperia XZ2"; + compatible = "sony,akari-row", "qcom,sdm845"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts new file mode 100644 index 000000000..2f5e12dea --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio + */ + +/dts-v1/; + +#include "sdm845-sony-xperia-tama.dtsi" + +/ { + model = "Sony Xperia XZ3"; + compatible = "sony,akatsuki-row", "qcom,sdm845"; +}; + +/* For the future: WLED + LAB/IBB/OLEDB are not used on Akatsuki */ +&vreg_l14a_1p8 { + regulator-min-microvolt = <1840000>; + regulator-max-microvolt = <1840000>; +}; + +&vreg_l22a_2p8 { + /* Note: Round-down from 2700000 to be a multiple of PLDO step-size 8000 */ + regulator-min-microvolt = <2696000>; + regulator-max-microvolt = <2696000>; +}; + +&vreg_l28a_2p8 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts new file mode 100644 index 000000000..c9e62c72f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio + */ + +/dts-v1/; + +#include "sdm845-sony-xperia-tama.dtsi" + +/ { + model = "Sony Xperia XZ2 Compact"; + compatible = "sony,apollo-row", "qcom,sdm845"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi new file mode 100644 index 000000000..249a715d5 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi @@ -0,0 +1,447 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio + */ + +#include +#include +#include "sdm845.dtsi" +#include "pm8005.dtsi" +#include "pm8998.dtsi" +#include "pmi8998.dtsi" + +/ { + qcom,msm-id = <321 0x20001>; /* SDM845 v2.1 */ + qcom,board-id = <8 0>; + + aliases { + serial0 = &uart6; + serial1 = &uart9; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + /* Neither Camera Focus, nor Camera Shutter seem to work... */ + + key-vol-down { + label = "volume_down"; + gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <15>; + gpio-key,wakeup; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + vreg_s4a_1p8: pm8998-smps4 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; + + reserved-memory { + /* SONY was cool and didn't diverge from MTP this time, yay! */ + cont_splash_mem: memory@9d400000 { + reg = <0x0 0x9d400000 0x0 0x2400000>; + no-map; + }; + + ramoops@ffc00000 { + compatible = "ramoops"; + reg = <0x0 0xffc00000 0x0 0x100000>; + record-size = <0x10000>; + console-size = <0x60000>; + ftrace-size = <0x10000>; + pmsg-size = <0x20000>; + ecc-size = <16>; + no-map; + }; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8998-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + vdd-s13-supply = <&vph_pwr>; + vdd-l1-l27-supply = <&vreg_s7a_0p9>; + vdd-l2-l8-l17-supply = <&vreg_s3a_1p3>; + vdd-l3-l11-supply = <&vreg_s7a_0p9>; + vdd-l4-l5-supply = <&vreg_s7a_0p9>; + vdd-l6-supply = <&vph_pwr>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>; + vdd-l9-supply = <&vreg_s5a_1p9>; + vdd-l10-l23-l25-supply = <&src_vreg_bob>; + vdd-l13-l19-l21-supply = <&src_vreg_bob>; + vdd-l16-l28-supply = <&src_vreg_bob>; + vdd-l18-l22-supply = <&src_vreg_bob>; + vdd-l20-l24-supply = <&src_vreg_bob>; + vdd-l26-supply = <&vreg_s3a_1p3>; + vin-lvs-1-2-supply = <&vreg_s4a_1p8>; + + vreg_s2a_1p1: smps2 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + vreg_s3a_1p3: smps3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_s5a_1p9: smps5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7a_0p9: smps7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + + vreg_l1a_0p9: ldo1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + }; + + vreg_l2a_1p2: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + regulator-always-on; + }; + + vreg_l3a_1p0: ldo3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = ; + }; + + vreg_l5a_0p8: ldo5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = ; + }; + + vreg_l6a_1p8: ldo6 { + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <1856000>; + regulator-initial-mode = ; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l8a_1p2: ldo8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1248000>; + regulator-initial-mode = ; + }; + + vreg_l9a_1p7: ldo9 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = ; + }; + + vreg_l10a_1p7: ldo10 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = ; + }; + + vreg_l11a_1p0: ldo11 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1048000>; + regulator-initial-mode = ; + }; + + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l13a_1p8: ldo13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l14a_1p8: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l15a_1p8: ldo15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l16a_2p7: ldo16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + regulator-initial-mode = ; + }; + + vreg_l17a_1p3: ldo17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = ; + }; + + vreg_l18a_2p7: ldo18 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l19a_2p7: ldo19 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + regulator-initial-mode = ; + + /* + * The driver *really* doesn't want this regualtor to exist, + * saying that it could not get the current voltage (-ENOTRECOVERABLE) + * even though it surely is used on these devices (as a voltage + * source for camera autofocus) + */ + status = "disabled"; + }; + + vreg_l20a_2p7: ldo20 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l21a_2p7: ldo21 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l22a_2p8: ldo22 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = ; + }; + + vreg_l23a_3p0: ldo23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + }; + + vreg_l24a_3p1: ldo24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = ; + }; + + vreg_l25a_3p0: ldo25 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + }; + + vreg_l26a_1p2: ldo26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l28a_2p8: ldo28 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_lvs1a_1p8: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + }; + + regulators-1 { + compatible = "qcom,pmi8998-rpmh-regulators"; + qcom,pmic-id = "b"; + + src_vreg_bob: bob { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3600000>; + regulator-initial-mode = ; + }; + }; + + regulators-2 { + compatible = "qcom,pm8005-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + + vreg_s3c_0p6: smps3 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <600000>; + }; + }; +}; + +&gcc { + protected-clocks = , + , + , + , + ; +}; + +&i2c5 { + status = "okay"; + clock-frequency = <400000>; + + /* Synaptics touchscreen @ 2c, 3c */ +}; + +&i2c10 { + status = "okay"; + clock-frequency = <400000>; + + /* Qcom SMB1355 @ 8, c */ + /* NXP PN547 NFC @ 28 */ + /* Renesas IDTP9221 Qi charger @ 61 */ +}; + +&i2c14 { + status = "okay"; + clock-frequency = <400000>; + + /* SONY ToF sensor @ 52 */ + /* AMS TCS3490 RGB+IR color sensor @ 72 */ +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&sdhc_2 { + status = "okay"; + + vmmc-supply = <&vreg_l21a_2p7>; + vqmmc-supply = <&vreg_l13a_1p8>; + cd-gpios = <&tlmm 126 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&sdc2_default_state>; + pinctrl-names = "default"; + bus-width = <4>; + no-sdio; + no-emmc; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <81 4>; + + sdc2_default_state: sdc2-default-state { + clk { + pins = "sdc2_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd { + pins = "sdc2_cmd"; + drive-strength = <10>; + bias-pull-up; + }; + + data { + pins = "sdc2_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; +}; + +&uart6 { + status = "okay"; +}; + +&uart9 { + status = "okay"; +}; + +/* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE WILL DIE! */ +&ufs_mem_hc { status = "disabled"; }; +&ufs_mem_phy { status = "disabled"; }; + +&usb_1 { + status = "okay"; + + qcom,select-utmi-as-pipe-clk; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; + + maximum-speed = "high-speed"; + phys = <&usb_1_hsphy>; + phy-names = "usb2-phy"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdd-supply = <&vreg_l1a_0p9>; + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p1>; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts new file mode 100644 index 000000000..6d6b3dd69 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts @@ -0,0 +1,594 @@ +// SPDX-License-Identifier: GPL-2.0 + +/dts-v1/; + +#include +#include +#include +#include +#include "sdm845.dtsi" +#include "pm8998.dtsi" +#include "pmi8998.dtsi" + +/* + * Delete following upstream (sdm845.dtsi) reserved + * memory mappings which are different in this device. + */ +/delete-node/ &tz_mem; +/delete-node/ &adsp_mem; +/delete-node/ &wlan_msa_mem; +/delete-node/ &mpss_region; +/delete-node/ &venus_mem; +/delete-node/ &cdsp_mem; +/delete-node/ &mba_region; +/delete-node/ &slpi_mem; +/delete-node/ &spss_mem; +/delete-node/ &rmtfs_mem; + +/ { + model = "Xiaomi Pocophone F1"; + compatible = "xiaomi,beryllium", "qcom,sdm845"; + chassis-type = "handset"; + + /* required for bootloader to select correct board */ + qcom,board-id = <69 0>; + qcom,msm-id = <321 0x20001>; + + aliases { + hsuart0 = &uart6; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&vol_up_pin_a>; + + key-vol-up { + label = "Volume Up"; + linux,code = ; + gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + }; + }; + + /* Reserved memory changes from downstream */ + reserved-memory { + tz_mem: memory@86200000 { + reg = <0 0x86200000 0 0x4900000>; + no-map; + }; + + adsp_mem: memory@8c500000 { + reg = <0 0x8c500000 0 0x1e00000>; + no-map; + }; + + wlan_msa_mem: memory@8e300000 { + reg = <0 0x8e300000 0 0x100000>; + no-map; + }; + + mpss_region: memory@8e400000 { + reg = <0 0x8e400000 0 0x7800000>; + no-map; + }; + + venus_mem: memory@95c00000 { + reg = <0 0x95c00000 0 0x500000>; + no-map; + }; + + cdsp_mem: memory@96100000 { + reg = <0 0x96100000 0 0x800000>; + no-map; + }; + + mba_region: memory@96900000 { + reg = <0 0x96900000 0 0x200000>; + no-map; + }; + + slpi_mem: memory@96b00000 { + reg = <0 0x96b00000 0 0x1400000>; + no-map; + }; + + spss_mem: memory@97f00000 { + reg = <0 0x97f00000 0 0x100000>; + no-map; + }; + + rmtfs_mem: memory@f6301000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0xf6301000 0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + }; + + vreg_s4a_1p8: vreg-s4a-1p8 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; +}; + +&adsp_pas { + status = "okay"; + firmware-name = "qcom/sdm845/beryllium/adsp.mbn"; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8998-rpmh-regulators"; + qcom,pmic-id = "a"; + + vreg_l1a_0p875: ldo1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + }; + + vreg_l5a_0p8: ldo5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = ; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l13a_2p95: ldo13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l14a_1p8: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + regulator-boot-on; + regulator-always-on; + }; + + vreg_l17a_1p3: ldo17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = ; + }; + + vreg_l20a_2p95: ldo20 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2968000>; + regulator-initial-mode = ; + }; + + vreg_l21a_2p95: ldo21 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2968000>; + regulator-initial-mode = ; + }; + + vreg_l23a_3p3: ldo23 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + }; + + vreg_l24a_3p075: ldo24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = ; + }; + + vreg_l25a_3p3: ldo25 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + }; + + vreg_l26a_1p2: ldo26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + regulator-boot-on; + }; + }; +}; + +&cdsp_pas { + status = "okay"; + firmware-name = "qcom/sdm845/beryllium/cdsp.mbn"; +}; + +&dsi0 { + status = "okay"; + vdda-supply = <&vreg_l26a_1p2>; + + panel@0 { + compatible = "tianma,fhd-video"; + reg = <0>; + vddio-supply = <&vreg_l14a_1p8>; + vddpos-supply = <&lab>; + vddneg-supply = <&ibb>; + + #address-cells = <1>; + #size-cells = <0>; + + backlight = <&pmi8998_wled>; + reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; + + port { + tianma_nt36672a_in_0: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; +}; + +&dsi0_out { + remote-endpoint = <&tianma_nt36672a_in_0>; + data-lanes = <0 1 2 3>; +}; + +&dsi0_phy { + status = "okay"; + vdds-supply = <&vreg_l1a_0p875>; +}; + +&gcc { + protected-clocks = , + , + , + , + ; +}; + +&gmu { + status = "okay"; +}; + +&gpu { + status = "okay"; + + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sdm845/beryllium/a630_zap.mbn"; + }; +}; + +&ibb { + regulator-min-microvolt = <4600000>; + regulator-max-microvolt = <6000000>; + regulator-over-current-protection; + regulator-pull-down; + regulator-soft-start; + qcom,discharge-resistor-kohms = <300>; +}; + +&lab { + regulator-min-microvolt = <4600000>; + regulator-max-microvolt = <6000000>; + regulator-over-current-protection; + regulator-pull-down; + regulator-soft-start; +}; + +&mdss { + status = "okay"; +}; + +&mss_pil { + status = "okay"; + firmware-name = "qcom/sdm845/beryllium/mba.mbn", "qcom/sdm845/beryllium/modem.mbn"; +}; + +&ipa { + status = "okay"; + memory-region = <&ipa_fw_mem>; + firmware-name = "qcom/sdm845/beryllium/ipa_fws.mbn"; +}; + +&pm8998_gpio { + vol_up_pin_a: vol-up-active-state { + pins = "gpio6"; + function = "normal"; + input-enable; + bias-pull-up; + qcom,drive-strength = ; + }; +}; + +&pmi8998_wled { + status = "okay"; + qcom,current-boost-limit = <970>; + qcom,ovp-millivolt = <29600>; + qcom,current-limit-microamp = <20000>; + qcom,num-strings = <2>; + qcom,switching-freq = <600>; + qcom,external-pfet; + qcom,cabc; +}; + +&pm8998_pon { + resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = ; + }; +}; + +/* QUAT I2S Uses 1 I2S SD Line for audio on TAS2559/60 amplifiers */ +&q6afedai { + qi2s@22 { + reg = ; + qcom,sd-lines = <0>; + }; +}; + +&q6asmdai { + dai@0 { + reg = <0>; + }; + + dai@1 { + reg = <1>; + }; + + dai@2 { + reg = <2>; + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>; + + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vreg_l13a_2p95>; + + bus-width = <4>; + cd-gpios = <&tlmm 126 GPIO_ACTIVE_HIGH>; +}; + +&sound { + compatible = "qcom,db845c-sndcard"; + pinctrl-0 = <&quat_mi2s_active + &quat_mi2s_sd0_active>; + pinctrl-names = "default"; + model = "Xiaomi Poco F1"; + audio-routing = + "RX_BIAS", "MCLK", + "AMIC1", "MIC BIAS1", + "AMIC2", "MIC BIAS2", + "AMIC3", "MIC BIAS3"; + + mm1-dai-link { + link-name = "MultiMedia1"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + mm2-dai-link { + link-name = "MultiMedia2"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + mm3-dai-link { + link-name = "MultiMedia3"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + slim-dai-link { + link-name = "SLIM Playback"; + cpu { + sound-dai = <&q6afedai SLIMBUS_0_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9340 0>; + }; + }; + + slimcap-dai-link { + link-name = "SLIM Capture"; + cpu { + sound-dai = <&q6afedai SLIMBUS_0_TX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9340 1>; + }; + }; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <81 4>; + + sdc2_default_state: sdc2-default { + clk { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + }; + + sdc2_card_det_n: sd-card-det-n { + pins = "gpio126"; + function = "gpio"; + bias-pull-up; + }; + + wcd_intr_default: wcd_intr_default { + pins = <54>; + function = "gpio"; + + input-enable; + bias-pull-down; + drive-strength = <2>; + }; +}; + +&uart6 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + max-speed = <3200000>; + }; +}; + +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l20a_2p95>; + vcc-max-microamp = <800000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l26a_1p2>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdd-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = ; + qcom,preemphasis-level = ; + qcom,preemphasis-width = ; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l26a_1p2>; + vdda-pll-supply = <&vreg_l1a_0p875>; +}; + +&venus { + status = "okay"; + firmware-name = "qcom/sdm845/beryllium/venus.mbn"; +}; + +&wcd9340{ + pinctrl-0 = <&wcd_intr_default>; + pinctrl-names = "default"; + clock-names = "extclk"; + clocks = <&rpmhcc RPMH_LN_BB_CLK2>; + reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-buck-sido-supply = <&vreg_s4a_1p8>; + vdd-tx-supply = <&vreg_s4a_1p8>; + vdd-rx-supply = <&vreg_s4a_1p8>; + vdd-io-supply = <&vreg_s4a_1p8>; + qcom,micbias1-microvolt = <2700000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <2700000>; + qcom,micbias4-microvolt = <2700000>; +}; + +&wifi { + status = "okay"; + + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; + vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; +}; + +/* PINCTRL - additions to nodes defined in sdm845.dtsi */ + +&qup_uart6_default { + pinmux { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + function = "qup6"; + }; + + cts { + pins = "gpio45"; + bias-disable; + }; + + rts-tx { + pins = "gpio46", "gpio47"; + drive-strength = <2>; + bias-disable; + }; + + rx { + pins = "gpio48"; + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts new file mode 100644 index 000000000..ffbe45a99 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts @@ -0,0 +1,761 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Xilin Wu + * Copyright (c) 2022, Molly Sophia + */ + +/dts-v1/; + +#include +#include +#include +#include +#include +#include +#include "sdm845.dtsi" +#include "pm8998.dtsi" +#include "pmi8998.dtsi" +#include "pm8005.dtsi" + +/* + * Delete following upstream (sdm845.dtsi) reserved + * memory mappings which are different in this device. + */ +/delete-node/ &rmtfs_mem; +/delete-node/ &adsp_mem; +/delete-node/ &wlan_msa_mem; +/delete-node/ &mpss_region; +/delete-node/ &venus_mem; +/delete-node/ &cdsp_mem; +/delete-node/ &mba_region; +/delete-node/ &slpi_mem; +/delete-node/ &spss_mem; + +/ { + model = "Xiaomi Mi MIX 2S"; + compatible = "xiaomi,polaris", "qcom,sdm845"; + chassis-type = "handset"; + + /* required for bootloader to select correct board */ + qcom,msm-id = <0x141 0x20001>; + qcom,board-id = <0x2a 0x0>; + + aliases { + serial0 = &uart9; + serial1 = &uart6; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&volume_up_gpio>; + + key-vol-up { + label = "Volume Up"; + linux,code = ; + gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + }; + }; + + reserved-memory { + adsp_mem: memory@8c500000 { + reg = <0 0x8c500000 0 0x1e00000>; + no-map; + }; + + wlan_msa_mem: memory@8e300000 { + reg = <0 0x8e300000 0 0x100000>; + no-map; + }; + + mpss_region: memory@8e400000 { + reg = <0 0x8e400000 0 0x7800000>; + no-map; + }; + + venus_mem: memory@95c00000 { + reg = <0 0x95c00000 0 0x500000>; + no-map; + }; + + cdsp_mem: memory@96100000 { + reg = <0 0x96100000 0 0x800000>; + no-map; + }; + + mba_region: memory@96900000 { + reg = <0 0x96900000 0 0x200000>; + no-map; + }; + + slpi_mem: memory@96b00000 { + reg = <0 0x96b00000 0 0x1400000>; + no-map; + }; + + spss_mem: memory@97f00000 { + reg = <0 0x97f00000 0 0x100000>; + no-map; + }; + + rmtfs_mem: memory@f6301000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0xf6301000 0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + }; + + battery: battery { + compatible = "simple-battery"; + + charge-full-design-microamp-hours = <3400000>; + voltage-min-design-microvolt = <3400000>; + voltage-max-design-microvolt = <4400000>; + }; + + vreg_tp_vddio: vreg-tp-vddio { + compatible = "regulator-fixed"; + regulator-name = "vreg_tp_vddio"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 23 GPIO_ACTIVE_HIGH>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + }; + + vreg_s4a_1p8: vreg-s4a-1p8 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8998-rpmh-regulators"; + qcom,pmic-id = "a"; + + vreg_s2a_1p1: smps2 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + vreg_s3a_1p35: smps3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_s5a_2p04: smps5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7a_1p025: smps7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + + vdda_mipi_dsi0_pll: + vdda_ufs1_core: + vreg_l1a_0p875: ldo1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + }; + + vreg_l2a_1p2: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + regulator-always-on; + }; + + vreg_l3a_1p0: ldo3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = ; + }; + + vreg_l5a_0p8: ldo5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = ; + }; + + vreg_l6a_1p8: ldo6 { + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <1856000>; + regulator-initial-mode = ; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l8a_1p2: ldo8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1248000>; + regulator-initial-mode = ; + }; + + vreg_l9a_1p8: ldo9 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = ; + }; + + vreg_l10a_2p95: ldo10 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = ; + }; + + vreg_l11a_1p05: ldo11 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1048000>; + regulator-initial-mode = ; + }; + + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l13a_2p95: ldo13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l14a_1p8: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1880000>; + regulator-initial-mode = ; + regulator-always-on; + }; + + vreg_l15a_1p8: ldo15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l16a_2p7: ldo16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + regulator-initial-mode = ; + }; + + vreg_l17a_1p3: ldo17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = ; + regulator-always-on; + }; + + vreg_l18a_2p9: ldo18 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l19a_3p1: ldo19 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = ; + }; + + vreg_l20a_2p95: ldo20 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l21a_2p95: ldo21 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l22a_3p3: ldo22 { + regulator-min-microvolt = <2864000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + }; + + vreg_l23a_3p3: ldo23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + }; + + vreg_l24a_3p075: ldo24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = ; + }; + + vreg_l25a_3p3: ldo25 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + regulator-always-on; + }; + + vdda_mipi_dsi0_1p2: + vdda_ufs1_1p2: + vreg_l26a_1p2: ldo26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l28a_3p0: ldo28 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + regulator-always-on; + }; + + vreg_lvs1a_1p8: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + + regulators-1 { + compatible = "qcom,pmi8998-rpmh-regulators"; + qcom,pmic-id = "b"; + + vreg_bob: bob { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3600000>; + regulator-initial-mode = ; + regulator-allow-bypass; + }; + }; + + regulators-2 { + compatible = "qcom,pm8005-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_smp3c_0p6: smps3 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <600000>; + regulator-always-on; + }; + }; +}; + +&cdsp_pas { + firmware-name = "qcom/sdm845/polaris/cdsp.mbn"; + status = "okay"; +}; + +&dsi0 { + vdda-supply = <&vdda_mipi_dsi0_1p2>; + status = "okay"; + + display_panel: panel@0 { + compatible = "jdi,fhd-nt35596s"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; + vddio-supply = <&vreg_l14a_1p8>; + backlight = <&pmi8998_wled>; + vddpos-supply = <&lab>; + vddneg-supply = <&ibb>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sde_dsi_active>; + pinctrl-1 = <&sde_dsi_suspend>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; +}; + +&dsi0_out { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; +}; + +&dsi0_phy { + vdds-supply = <&vdda_mipi_dsi0_pll>; + status = "okay"; +}; + +&gcc { + protected-clocks = , + , + , + , + ; +}; + +&gmu { + status = "okay"; +}; + +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&gpu { + status = "okay"; + + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sdm845/polaris/a630_zap.mbn"; + }; +}; + +&ibb { + regulator-min-microvolt = <4600000>; + regulator-max-microvolt = <6000000>; + regulator-over-current-protection; + regulator-pull-down; + regulator-soft-start; + qcom,discharge-resistor-kohms = <300>; +}; + +&ipa { + memory-region = <&ipa_fw_mem>; + firmware-name = "qcom/sdm845/polaris/ipa_fws.mbn"; + status = "okay"; +}; + +&i2c14 { + clock-frequency = <400000>; + dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>, + <&gpi_dma1 1 6 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "okay"; + + touchscreen@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts-extended = <&tlmm 125 0x2008>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&ts_int_default &ts_reset_default>; + pinctrl-1 = <&ts_int_sleep &ts_reset_sleep>; + + vdd-supply = <&vreg_l28a_3p0>; + vio-supply = <&vreg_tp_vddio>; + + syna,startup-delay-ms = <0xc8>; + syna,reset-delay-ms = <0xc8>; + + rmi4-f01@1 { + syna,nosleep-mode = <0x1>; + reg = <0x1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,rezero-wait-ms = <0xc8>; + syna,clip-x-high = <0x438>; + syna,clip-y-high = <0x870>; + syna,sensor-type = <0x1>; + syna,clip-x-low = <0x0>; + syna,clip-y-low = <0x0>; + }; + }; +}; + +&lab { + regulator-min-microvolt = <4600000>; + regulator-max-microvolt = <6000000>; + regulator-soft-start; + regulator-pull-down; +}; + +&mdss { + status = "okay"; +}; + +&mss_pil { + firmware-name = "qcom/sdm845/polaris/mba.mbn", "qcom/sdm845/polaris/modem.mbn"; + status = "okay"; +}; + +&pmi8998_wled { + qcom,current-limit-microamp = <20000>; + qcom,current-boost-limit = <970>; + qcom,ovp-millivolt = <19600>; + qcom,switching-freq = <600>; + qcom,num-strings = <4>; + qcom,cabc; + + status = "okay"; +}; + +&pm8998_gpio { + volume_up_gpio: pm8998-gpio6-state { + pinconf { + qcom,drive-strength = ; + function = "normal"; + pins = "gpio6"; + input-enable; + bias-pull-up; + }; + }; +}; + +&pm8998_pon { + resin { + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + compatible = "qcom,pm8941-resin"; + linux,code = ; + debounce = <15625>; + bias-pull-up; + }; +}; + +&q6afedai { + qi2s@22 { + reg = <22>; + qcom,sd-lines = <0>; + }; +}; + +&q6asmdai { + dai@0 { + reg = <0>; + }; + + dai@1 { + reg = <1>; + }; + + dai@2 { + reg = <2>; + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&qup_i2c14_default { + pinconf { + pins = "gpio33", "gpio34"; + drive-strength = <2>; + bias-disable; + }; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <81 4>; + + ts_reset_default: ts-reset-default { + pins = "gpio99"; + function = "gpio"; + drive-strength = <16>; + output-high; + }; + + ts_int_default: ts-int-default { + pins = "gpio125"; + function = "gpio"; + bias-pull-down; + drive-strength = <16>; + input-enable; + }; + + ts_reset_sleep: ts-reset-sleep { + pins = "gpio99"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + + ts_int_sleep: ts-int-sleep { + pins = "gpio125"; + function = "gpio"; + bias-pull-down; + drive-strength = <2>; + input-enable; + }; + + sde_dsi_active: sde-dsi-active { + pins = "gpio6", "gpio10"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + sde_dsi_suspend: sde-dsi-suspend { + pins = "gpio6", "gpio10"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + wcd_intr_default: wcd-intr-default { + pins = "gpio54"; + function = "gpio"; + input-enable; + bias-pull-down; + drive-strength = <2>; + }; +}; + +&uart6 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + /* This path is relative to the qca/ subdir under lib/firmware. */ + firmware-name = "polaris/crnv21.bin"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + max-speed = <3200000>; + }; +}; + +&usb_1 { + /* We'll use this as USB 2.0 only */ + qcom,select-utmi-as-pipe-clk; + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; + + /* Fastest mode for USB 2 */ + maximum-speed = "high-speed"; + + /* Remove USB3 phy */ + phys = <&usb_1_hsphy>; + phy-names = "usb2-phy"; +}; + +&usb_1_hsphy { + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; + vdda-pll-supply = <&vreg_l12a_1p8>; + vdd-supply = <&vreg_l1a_0p875>; + + qcom,preemphasis-width = ; + qcom,preemphasis-level = ; + qcom,hstx-trim-value = ; + qcom,imp-res-offset-value = <8>; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-pll-supply = <&vreg_l1a_0p875>; + vdda-phy-supply = <&vreg_l26a_1p2>; + status = "okay"; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; + vcc-supply = <&vreg_l20a_2p95>; + vcc-max-microamp = <800000>; + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vdda_ufs1_core>; + vdda-pll-supply = <&vdda_ufs1_1p2>; + status = "okay"; +}; + +&venus { + firmware-name = "qcom/sdm845/polaris/venus.mbn"; + status = "okay"; +}; + +&wcd9340 { + pinctrl-0 = <&wcd_intr_default>; + pinctrl-names = "default"; + clock-names = "extclk"; + clocks = <&rpmhcc RPMH_LN_BB_CLK2>; + reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; + vdd-buck-sido-supply = <&vreg_s4a_1p8>; + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-tx-supply = <&vreg_s4a_1p8>; + vdd-rx-supply = <&vreg_s4a_1p8>; + vdd-io-supply = <&vreg_s4a_1p8>; + + qcom,micbias1-microvolt = <2700000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <2700000>; + qcom,micbias4-microvolt = <2700000>; +}; + +&wifi { + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; + vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; + status = "okay"; +}; + +/* PINCTRL - additions to nodes defined in sdm845.dtsi */ + +&qup_uart6_default { + pinmux { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + function = "qup6"; + }; + + cts { + pins = "gpio45"; + bias-disable; + }; + + rts-tx { + pins = "gpio46", "gpio47"; + drive-strength = <2>; + bias-disable; + }; + + rx { + pins = "gpio48"; + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi new file mode 100644 index 000000000..4d5905ef0 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -0,0 +1,5671 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SDM845 SoC device tree source + * + * Copyright (c) 2018, The Linux Foundation. All rights reserved. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; + i2c9 = &i2c9; + i2c10 = &i2c10; + i2c11 = &i2c11; + i2c12 = &i2c12; + i2c13 = &i2c13; + i2c14 = &i2c14; + i2c15 = &i2c15; + spi0 = &spi0; + spi1 = &spi1; + spi2 = &spi2; + spi3 = &spi3; + spi4 = &spi4; + spi5 = &spi5; + spi6 = &spi6; + spi7 = &spi7; + spi8 = &spi8; + spi9 = &spi9; + spi10 = &spi10; + spi11 = &spi11; + spi12 = &spi12; + spi13 = &spi13; + spi14 = &spi14; + spi15 = &spi15; + }; + + chosen { }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0 0x80000000 0 0>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: hyp-mem@85700000 { + reg = <0 0x85700000 0 0x600000>; + no-map; + }; + + xbl_mem: xbl-mem@85e00000 { + reg = <0 0x85e00000 0 0x100000>; + no-map; + }; + + aop_mem: aop-mem@85fc0000 { + reg = <0 0x85fc0000 0 0x20000>; + no-map; + }; + + aop_cmd_db_mem: aop-cmd-db-mem@85fe0000 { + compatible = "qcom,cmd-db"; + reg = <0x0 0x85fe0000 0 0x20000>; + no-map; + }; + + smem@86000000 { + compatible = "qcom,smem"; + reg = <0x0 0x86000000 0 0x200000>; + no-map; + hwlocks = <&tcsr_mutex 3>; + }; + + tz_mem: tz@86200000 { + reg = <0 0x86200000 0 0x2d00000>; + no-map; + }; + + rmtfs_mem: rmtfs@88f00000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0x88f00000 0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + + qseecom_mem: qseecom@8ab00000 { + reg = <0 0x8ab00000 0 0x1400000>; + no-map; + }; + + camera_mem: camera-mem@8bf00000 { + reg = <0 0x8bf00000 0 0x500000>; + no-map; + }; + + ipa_fw_mem: ipa-fw@8c400000 { + reg = <0 0x8c400000 0 0x10000>; + no-map; + }; + + ipa_gsi_mem: ipa-gsi@8c410000 { + reg = <0 0x8c410000 0 0x5000>; + no-map; + }; + + gpu_mem: gpu@8c415000 { + reg = <0 0x8c415000 0 0x2000>; + no-map; + }; + + adsp_mem: adsp@8c500000 { + reg = <0 0x8c500000 0 0x1a00000>; + no-map; + }; + + wlan_msa_mem: wlan-msa@8df00000 { + reg = <0 0x8df00000 0 0x100000>; + no-map; + }; + + mpss_region: mpss@8e000000 { + reg = <0 0x8e000000 0 0x7800000>; + no-map; + }; + + venus_mem: venus@95800000 { + reg = <0 0x95800000 0 0x500000>; + no-map; + }; + + cdsp_mem: cdsp@95d00000 { + reg = <0 0x95d00000 0 0x800000>; + no-map; + }; + + mba_region: mba@96500000 { + reg = <0 0x96500000 0 0x200000>; + no-map; + }; + + slpi_mem: slpi@96700000 { + reg = <0 0x96700000 0 0x1400000>; + no-map; + }; + + spss_mem: spss@97b00000 { + reg = <0 0x97b00000 0 0x100000>; + no-map; + }; + }; + + cpus: cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x0>; + enable-method = "psci"; + capacity-dmips-mhz = <611>; + dynamic-power-coefficient = <154>; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; + #cooling-cells = <2>; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x100>; + enable-method = "psci"; + capacity-dmips-mhz = <611>; + dynamic-power-coefficient = <154>; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; + #cooling-cells = <2>; + next-level-cache = <&L2_100>; + L2_100: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x200>; + enable-method = "psci"; + capacity-dmips-mhz = <611>; + dynamic-power-coefficient = <154>; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; + #cooling-cells = <2>; + next-level-cache = <&L2_200>; + L2_200: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x300>; + enable-method = "psci"; + capacity-dmips-mhz = <611>; + dynamic-power-coefficient = <154>; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + #cooling-cells = <2>; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; + next-level-cache = <&L2_300>; + L2_300: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x400>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <442>; + qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD4>; + power-domain-names = "psci"; + #cooling-cells = <2>; + next-level-cache = <&L2_400>; + L2_400: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x500>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <442>; + qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD5>; + power-domain-names = "psci"; + #cooling-cells = <2>; + next-level-cache = <&L2_500>; + L2_500: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x600>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <442>; + qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD6>; + power-domain-names = "psci"; + #cooling-cells = <2>; + next-level-cache = <&L2_600>; + L2_600: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x700>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <442>; + qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD7>; + power-domain-names = "psci"; + #cooling-cells = <2>; + next-level-cache = <&L2_700>; + L2_700: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + + core4 { + cpu = <&CPU4>; + }; + + core5 { + cpu = <&CPU5>; + }; + + core6 { + cpu = <&CPU6>; + }; + + core7 { + cpu = <&CPU7>; + }; + }; + }; + + cpu_idle_states: idle-states { + entry-method = "psci"; + + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "little-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <350>; + exit-latency-us = <461>; + min-residency-us = <1890>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "big-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <264>; + exit-latency-us = <621>; + min-residency-us = <952>; + local-timer-stop; + }; + }; + + domain-idle-states { + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "domain-idle-state"; + idle-state-name = "cluster-power-collapse"; + arm,psci-suspend-param = <0x4100c244>; + entry-latency-us = <3263>; + exit-latency-us = <6562>; + min-residency-us = <9987>; + local-timer-stop; + }; + }; + }; + + cpu0_opp_table: opp-table-cpu0 { + compatible = "operating-points-v2"; + opp-shared; + + cpu0_opp1: opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-peak-kBps = <800000 4800000>; + }; + + cpu0_opp2: opp-403200000 { + opp-hz = /bits/ 64 <403200000>; + opp-peak-kBps = <800000 4800000>; + }; + + cpu0_opp3: opp-480000000 { + opp-hz = /bits/ 64 <480000000>; + opp-peak-kBps = <800000 6451200>; + }; + + cpu0_opp4: opp-576000000 { + opp-hz = /bits/ 64 <576000000>; + opp-peak-kBps = <800000 6451200>; + }; + + cpu0_opp5: opp-652800000 { + opp-hz = /bits/ 64 <652800000>; + opp-peak-kBps = <800000 7680000>; + }; + + cpu0_opp6: opp-748800000 { + opp-hz = /bits/ 64 <748800000>; + opp-peak-kBps = <1804000 9216000>; + }; + + cpu0_opp7: opp-825600000 { + opp-hz = /bits/ 64 <825600000>; + opp-peak-kBps = <1804000 9216000>; + }; + + cpu0_opp8: opp-902400000 { + opp-hz = /bits/ 64 <902400000>; + opp-peak-kBps = <1804000 10444800>; + }; + + cpu0_opp9: opp-979200000 { + opp-hz = /bits/ 64 <979200000>; + opp-peak-kBps = <1804000 11980800>; + }; + + cpu0_opp10: opp-1056000000 { + opp-hz = /bits/ 64 <1056000000>; + opp-peak-kBps = <1804000 11980800>; + }; + + cpu0_opp11: opp-1132800000 { + opp-hz = /bits/ 64 <1132800000>; + opp-peak-kBps = <2188000 13516800>; + }; + + cpu0_opp12: opp-1228800000 { + opp-hz = /bits/ 64 <1228800000>; + opp-peak-kBps = <2188000 15052800>; + }; + + cpu0_opp13: opp-1324800000 { + opp-hz = /bits/ 64 <1324800000>; + opp-peak-kBps = <2188000 16588800>; + }; + + cpu0_opp14: opp-1420800000 { + opp-hz = /bits/ 64 <1420800000>; + opp-peak-kBps = <3072000 18124800>; + }; + + cpu0_opp15: opp-1516800000 { + opp-hz = /bits/ 64 <1516800000>; + opp-peak-kBps = <3072000 19353600>; + }; + + cpu0_opp16: opp-1612800000 { + opp-hz = /bits/ 64 <1612800000>; + opp-peak-kBps = <4068000 19353600>; + }; + + cpu0_opp17: opp-1689600000 { + opp-hz = /bits/ 64 <1689600000>; + opp-peak-kBps = <4068000 20889600>; + }; + + cpu0_opp18: opp-1766400000 { + opp-hz = /bits/ 64 <1766400000>; + opp-peak-kBps = <4068000 22425600>; + }; + }; + + cpu4_opp_table: opp-table-cpu4 { + compatible = "operating-points-v2"; + opp-shared; + + cpu4_opp1: opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-peak-kBps = <800000 4800000>; + }; + + cpu4_opp2: opp-403200000 { + opp-hz = /bits/ 64 <403200000>; + opp-peak-kBps = <800000 4800000>; + }; + + cpu4_opp3: opp-480000000 { + opp-hz = /bits/ 64 <480000000>; + opp-peak-kBps = <1804000 4800000>; + }; + + cpu4_opp4: opp-576000000 { + opp-hz = /bits/ 64 <576000000>; + opp-peak-kBps = <1804000 4800000>; + }; + + cpu4_opp5: opp-652800000 { + opp-hz = /bits/ 64 <652800000>; + opp-peak-kBps = <1804000 4800000>; + }; + + cpu4_opp6: opp-748800000 { + opp-hz = /bits/ 64 <748800000>; + opp-peak-kBps = <1804000 4800000>; + }; + + cpu4_opp7: opp-825600000 { + opp-hz = /bits/ 64 <825600000>; + opp-peak-kBps = <2188000 9216000>; + }; + + cpu4_opp8: opp-902400000 { + opp-hz = /bits/ 64 <902400000>; + opp-peak-kBps = <2188000 9216000>; + }; + + cpu4_opp9: opp-979200000 { + opp-hz = /bits/ 64 <979200000>; + opp-peak-kBps = <2188000 9216000>; + }; + + cpu4_opp10: opp-1056000000 { + opp-hz = /bits/ 64 <1056000000>; + opp-peak-kBps = <3072000 9216000>; + }; + + cpu4_opp11: opp-1132800000 { + opp-hz = /bits/ 64 <1132800000>; + opp-peak-kBps = <3072000 11980800>; + }; + + cpu4_opp12: opp-1209600000 { + opp-hz = /bits/ 64 <1209600000>; + opp-peak-kBps = <4068000 11980800>; + }; + + cpu4_opp13: opp-1286400000 { + opp-hz = /bits/ 64 <1286400000>; + opp-peak-kBps = <4068000 11980800>; + }; + + cpu4_opp14: opp-1363200000 { + opp-hz = /bits/ 64 <1363200000>; + opp-peak-kBps = <4068000 15052800>; + }; + + cpu4_opp15: opp-1459200000 { + opp-hz = /bits/ 64 <1459200000>; + opp-peak-kBps = <4068000 15052800>; + }; + + cpu4_opp16: opp-1536000000 { + opp-hz = /bits/ 64 <1536000000>; + opp-peak-kBps = <5412000 15052800>; + }; + + cpu4_opp17: opp-1612800000 { + opp-hz = /bits/ 64 <1612800000>; + opp-peak-kBps = <5412000 15052800>; + }; + + cpu4_opp18: opp-1689600000 { + opp-hz = /bits/ 64 <1689600000>; + opp-peak-kBps = <5412000 19353600>; + }; + + cpu4_opp19: opp-1766400000 { + opp-hz = /bits/ 64 <1766400000>; + opp-peak-kBps = <6220000 19353600>; + }; + + cpu4_opp20: opp-1843200000 { + opp-hz = /bits/ 64 <1843200000>; + opp-peak-kBps = <6220000 19353600>; + }; + + cpu4_opp21: opp-1920000000 { + opp-hz = /bits/ 64 <1920000000>; + opp-peak-kBps = <7216000 19353600>; + }; + + cpu4_opp22: opp-1996800000 { + opp-hz = /bits/ 64 <1996800000>; + opp-peak-kBps = <7216000 20889600>; + }; + + cpu4_opp23: opp-2092800000 { + opp-hz = /bits/ 64 <2092800000>; + opp-peak-kBps = <7216000 20889600>; + }; + + cpu4_opp24: opp-2169600000 { + opp-hz = /bits/ 64 <2169600000>; + opp-peak-kBps = <7216000 20889600>; + }; + + cpu4_opp25: opp-2246400000 { + opp-hz = /bits/ 64 <2246400000>; + opp-peak-kBps = <7216000 20889600>; + }; + + cpu4_opp26: opp-2323200000 { + opp-hz = /bits/ 64 <2323200000>; + opp-peak-kBps = <7216000 20889600>; + }; + + cpu4_opp27: opp-2400000000 { + opp-hz = /bits/ 64 <2400000000>; + opp-peak-kBps = <7216000 22425600>; + }; + + cpu4_opp28: opp-2476800000 { + opp-hz = /bits/ 64 <2476800000>; + opp-peak-kBps = <7216000 22425600>; + }; + + cpu4_opp29: opp-2553600000 { + opp-hz = /bits/ 64 <2553600000>; + opp-peak-kBps = <7216000 22425600>; + }; + + cpu4_opp30: opp-2649600000 { + opp-hz = /bits/ 64 <2649600000>; + opp-peak-kBps = <7216000 22425600>; + }; + + cpu4_opp31: opp-2745600000 { + opp-hz = /bits/ 64 <2745600000>; + opp-peak-kBps = <7216000 25497600>; + }; + + cpu4_opp32: opp-2803200000 { + opp-hz = /bits/ 64 <2803200000>; + opp-peak-kBps = <7216000 25497600>; + }; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = ; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <38400000>; + clock-output-names = "xo_board"; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32764>; + }; + }; + + firmware { + scm { + compatible = "qcom,scm-sdm845", "qcom,scm"; + }; + }; + + adsp_pas: remoteproc-adsp { + compatible = "qcom,sdm845-adsp-pas"; + + interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + memory-region = <&adsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = ; + label = "lpass"; + qcom,remote-pid = <2>; + mboxes = <&apss_shared 8>; + + apr { + compatible = "qcom,apr-v2"; + qcom,glink-channels = "apr_audio_svc"; + qcom,domain = ; + #address-cells = <1>; + #size-cells = <0>; + qcom,intents = <512 20>; + + apr-service@3 { + reg = ; + compatible = "qcom,q6core"; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + }; + + q6afe: apr-service@4 { + compatible = "qcom,q6afe"; + reg = ; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + q6afedai: dais { + compatible = "qcom,q6afe-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + }; + }; + + q6asm: apr-service@7 { + compatible = "qcom,q6asm"; + reg = ; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + q6asmdai: dais { + compatible = "qcom,q6asm-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + iommus = <&apps_smmu 0x1821 0x0>; + }; + }; + + q6adm: apr-service@8 { + compatible = "qcom,q6adm"; + reg = ; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + q6routing: routing { + compatible = "qcom,q6adm-routing"; + #sound-dai-cells = <0>; + }; + }; + }; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "adsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1823 0x0>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1824 0x0>; + }; + }; + }; + }; + + cdsp_pas: remoteproc-cdsp { + compatible = "qcom,sdm845-cdsp-pas"; + + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + memory-region = <&cdsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&cdsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = ; + label = "turing"; + qcom,remote-pid = <5>; + mboxes = <&apss_shared 4>; + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "cdsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x1401 0x30>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x1402 0x30>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1403 0x30>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1404 0x30>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x1405 0x30>; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x1406 0x30>; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x1407 0x30>; + }; + + compute-cb@8 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <8>; + iommus = <&apps_smmu 0x1408 0x30>; + }; + }; + }; + }; + + smp2p-cdsp { + compatible = "qcom,smp2p"; + qcom,smem = <94>, <432>; + + interrupts = ; + + mboxes = <&apss_shared 6>; + + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + cdsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + cdsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-lpass { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupts = ; + + mboxes = <&apss_shared 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-mpss { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + interrupts = ; + mboxes = <&apss_shared 14>; + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + ipa_smp2p_out: ipa-ap-to-modem { + qcom,entry-name = "ipa"; + #qcom,smem-state-cells = <1>; + }; + + ipa_smp2p_in: ipa-modem-to-ap { + qcom,entry-name = "ipa"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-slpi { + compatible = "qcom,smp2p"; + qcom,smem = <481>, <430>; + interrupts = ; + mboxes = <&apss_shared 26>; + qcom,local-pid = <0>; + qcom,remote-pid = <3>; + + slpi_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + slpi_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + psci: psci { + compatible = "arm,psci-1.0"; + method = "smc"; + + CPU_PD0: power-domain-cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD1: power-domain-cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD2: power-domain-cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD3: power-domain-cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD4: power-domain-cpu4 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD5: power-domain-cpu5 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD6: power-domain-cpu6 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD7: power-domain-cpu7 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CLUSTER_PD: power-domain-cluster { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP_0>; + }; + }; + + soc: soc@0 { + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + compatible = "simple-bus"; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-sdm845"; + reg = <0 0x00100000 0 0x1f0000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>, + <&pcie0_lane>, + <&pcie1_lane>; + clock-names = "bi_tcxo", + "bi_tcxo_ao", + "sleep_clk", + "pcie_0_pipe_clk", + "pcie_1_pipe_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + power-domains = <&rpmhpd SDM845_CX>; + }; + + qfprom@784000 { + compatible = "qcom,sdm845-qfprom", "qcom,qfprom"; + reg = <0 0x00784000 0 0x8ff>; + #address-cells = <1>; + #size-cells = <1>; + + qusb2p_hstx_trim: hstx-trim-primary@1eb { + reg = <0x1eb 0x1>; + bits = <1 4>; + }; + + qusb2s_hstx_trim: hstx-trim-secondary@1eb { + reg = <0x1eb 0x2>; + bits = <6 4>; + }; + }; + + rng: rng@793000 { + compatible = "qcom,prng-ee"; + reg = <0 0x00793000 0 0x1000>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; + + qup_opp_table: opp-table-qup { + compatible = "operating-points-v2"; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-128000000 { + opp-hz = /bits/ 64 <128000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + + gpi_dma0: dma-controller@800000 { + #dma-cells = <3>; + compatible = "qcom,sdm845-gpi-dma"; + reg = <0 0x00800000 0 0x60000>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + ; + dma-channels = <13>; + dma-channel-mask = <0xfa>; + iommus = <&apps_smmu 0x0016 0x0>; + status = "disabled"; + }; + + qupv3_id_0: geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x008c0000 0 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + iommus = <&apps_smmu 0x3 0x0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core"; + status = "disabled"; + + i2c0: i2c@880000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00880000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c0_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, + <&gpi_dma0 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi0: spi@880000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00880000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi0_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, + <&gpi_dma0 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart0: serial@880000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00880000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart0_default>; + interrupts = ; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c1: i2c@884000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00884000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c1_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, + <&gpi_dma0 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi1: spi@884000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00884000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi1_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, + <&gpi_dma0 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart1: serial@884000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00884000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart1_default>; + interrupts = ; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c2: i2c@888000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00888000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c2_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, + <&gpi_dma0 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi2: spi@888000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00888000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi2_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, + <&gpi_dma0 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart2: serial@888000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00888000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart2_default>; + interrupts = ; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c3: i2c@88c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0088c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c3_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, + <&gpi_dma0 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi3: spi@88c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0088c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi3_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, + <&gpi_dma0 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart3: serial@88c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x0088c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart3_default>; + interrupts = ; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c4: i2c@890000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00890000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c4_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, + <&gpi_dma0 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi4: spi@890000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00890000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi4_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, + <&gpi_dma0 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart4: serial@890000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00890000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart4_default>; + interrupts = ; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c5: i2c@894000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00894000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c5_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, + <&gpi_dma0 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi5: spi@894000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00894000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi5_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, + <&gpi_dma0 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart5: serial@894000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00894000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart5_default>; + interrupts = ; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c6: i2c@898000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00898000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c6_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>, + <&gpi_dma0 1 6 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi6: spi@898000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00898000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi6_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>, + <&gpi_dma0 1 6 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart6: serial@898000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00898000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart6_default>; + interrupts = ; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c7: i2c@89c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0089c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c7_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + status = "disabled"; + }; + + spi7: spi@89c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0089c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi7_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>, + <&gpi_dma0 1 7 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart7: serial@89c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x0089c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart7_default>; + interrupts = ; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + }; + + gpi_dma1: dma-controller@0xa00000 { + #dma-cells = <3>; + compatible = "qcom,sdm845-gpi-dma"; + reg = <0 0x00a00000 0 0x60000>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + ; + dma-channels = <13>; + dma-channel-mask = <0xfa>; + iommus = <&apps_smmu 0x06d6 0x0>; + status = "disabled"; + }; + + qupv3_id_1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x00ac0000 0 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + iommus = <&apps_smmu 0x6c3 0x0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core"; + status = "disabled"; + + i2c8: i2c@a80000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a80000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c8_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, + <&gpi_dma1 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi8: spi@a80000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a80000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi8_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, + <&gpi_dma1 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart8: serial@a80000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a80000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart8_default>; + interrupts = ; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c9: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a84000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c9_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, + <&gpi_dma1 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi9: spi@a84000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a84000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi9_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, + <&gpi_dma1 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart9: serial@a84000 { + compatible = "qcom,geni-debug-uart"; + reg = <0 0x00a84000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart9_default>; + interrupts = ; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c10: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a88000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c10_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, + <&gpi_dma1 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi10: spi@a88000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a88000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi10_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, + <&gpi_dma1 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart10: serial@a88000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a88000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart10_default>; + interrupts = ; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c11: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a8c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c11_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, + <&gpi_dma1 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi11: spi@a8c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a8c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi11_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, + <&gpi_dma1 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart11: serial@a8c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a8c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart11_default>; + interrupts = ; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c12: i2c@a90000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a90000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c12_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, + <&gpi_dma1 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi12: spi@a90000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a90000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi12_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, + <&gpi_dma1 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart12: serial@a90000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a90000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart12_default>; + interrupts = ; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c13: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a94000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c13_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, + <&gpi_dma1 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi13: spi@a94000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a94000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi13_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>, + <&gpi_dma1 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart13: serial@a94000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a94000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart13_default>; + interrupts = ; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c14: i2c@a98000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a98000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c14_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>, + <&gpi_dma1 1 6 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi14: spi@a98000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a98000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi14_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>, + <&gpi_dma1 1 6 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart14: serial@a98000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a98000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart14_default>; + interrupts = ; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c15: i2c@a9c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a9c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c15_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + status = "disabled"; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>, + <&gpi_dma1 1 7 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + }; + + spi15: spi@a9c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a9c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi15_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>, + <&gpi_dma1 1 7 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart15: serial@a9c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a9c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart15_default>; + interrupts = ; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + }; + + llcc: system-cache-controller@1100000 { + compatible = "qcom,sdm845-llcc"; + reg = <0 0x01100000 0 0x31000>, <0 0x01300000 0 0x50000>; + reg-names = "llcc_base", "llcc_broadcast_base"; + interrupts = ; + }; + + pmu@114a000 { + compatible = "qcom,sdm845-llcc-bwmon"; + reg = <0 0x0114a000 0 0x1000>; + interrupts = ; + interconnects = <&mem_noc MASTER_LLCC 3 &mem_noc SLAVE_EBI1 3>; + + operating-points-v2 = <&llcc_bwmon_opp_table>; + + llcc_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + /* + * The interconnect path bandwidth taken from + * cpu4_opp_table bandwidth for gladiator_noc-mem_noc + * interconnect. This also matches the + * bandwidth table of qcom,llccbw (qcom,bw-tbl, + * bus width: 4 bytes) from msm-4.9 downstream + * kernel. + */ + opp-0 { + opp-peak-kBps = <800000>; + }; + opp-1 { + opp-peak-kBps = <1804000>; + }; + opp-2 { + opp-peak-kBps = <3072000>; + }; + opp-3 { + opp-peak-kBps = <5412000>; + }; + opp-4 { + opp-peak-kBps = <7216000>; + }; + }; + }; + + pmu@1436400 { + compatible = "qcom,sdm845-bwmon", "qcom,msm8998-bwmon"; + reg = <0 0x01436400 0 0x600>; + interrupts = ; + interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_LLCC 3>; + + operating-points-v2 = <&cpu_bwmon_opp_table>; + + cpu_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + /* + * The interconnect path bandwidth taken from + * cpu4_opp_table bandwidth for OSM L3 + * interconnect. This also matches the OSM L3 + * from bandwidth table of qcom,cpu4-l3lat-mon + * (qcom,core-dev-table, bus width: 16 bytes) + * from msm-4.9 downstream kernel. + */ + opp-0 { + opp-peak-kBps = <4800000>; + }; + opp-1 { + opp-peak-kBps = <9216000>; + }; + opp-2 { + opp-peak-kBps = <15052800>; + }; + opp-3 { + opp-peak-kBps = <20889600>; + }; + opp-4 { + opp-peak-kBps = <25497600>; + }; + }; + }; + + pcie0: pci@1c00000 { + compatible = "qcom,pcie-sdm845"; + reg = <0 0x01c00000 0 0x2000>, + <0 0x60000000 0 0xf1d>, + <0 0x60000f20 0 0xa8>, + <0 0x60100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0xd00000>; + + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "tbu"; + + iommus = <&apps_smmu 0x1c10 0xf>; + iommu-map = <0x0 &apps_smmu 0x1c10 0x1>, + <0x100 &apps_smmu 0x1c11 0x1>, + <0x200 &apps_smmu 0x1c12 0x1>, + <0x300 &apps_smmu 0x1c13 0x1>, + <0x400 &apps_smmu 0x1c14 0x1>, + <0x500 &apps_smmu 0x1c15 0x1>, + <0x600 &apps_smmu 0x1c16 0x1>, + <0x700 &apps_smmu 0x1c17 0x1>, + <0x800 &apps_smmu 0x1c18 0x1>, + <0x900 &apps_smmu 0x1c19 0x1>, + <0xa00 &apps_smmu 0x1c1a 0x1>, + <0xb00 &apps_smmu 0x1c1b 0x1>, + <0xc00 &apps_smmu 0x1c1c 0x1>, + <0xd00 &apps_smmu 0x1c1d 0x1>, + <0xe00 &apps_smmu 0x1c1e 0x1>, + <0xf00 &apps_smmu 0x1c1f 0x1>; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_0_GDSC>; + + phys = <&pcie0_lane>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie0_phy: phy@1c06000 { + compatible = "qcom,sdm845-qmp-pcie-phy"; + reg = <0 0x01c06000 0 0x18c>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_CLKREF_CLK>, + <&gcc GCC_PCIE_PHY_REFGEN_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "refgen"; + + resets = <&gcc GCC_PCIE_0_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE_PHY_REFGEN_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie0_lane: phy@1c06200 { + reg = <0 0x01c06200 0 0x128>, + <0 0x01c06400 0 0x1fc>, + <0 0x01c06800 0 0x218>, + <0 0x01c06600 0 0x70>; + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "pipe0"; + + #clock-cells = <0>; + #phy-cells = <0>; + clock-output-names = "pcie_0_pipe_clk"; + }; + }; + + pcie1: pci@1c08000 { + compatible = "qcom,pcie-sdm845"; + reg = <0 0x01c08000 0 0x2000>, + <0 0x40000000 0 0xf1d>, + <0 0x40000f20 0 0xa8>, + <0 0x40100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "config"; + device_type = "pci"; + linux,pci-domain = <1>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; + + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, + <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, + <&gcc GCC_PCIE_1_CLKREF_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ref", + "tbu"; + + assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; + assigned-clock-rates = <19200000>; + + iommus = <&apps_smmu 0x1c00 0xf>; + iommu-map = <0x0 &apps_smmu 0x1c00 0x1>, + <0x100 &apps_smmu 0x1c01 0x1>, + <0x200 &apps_smmu 0x1c02 0x1>, + <0x300 &apps_smmu 0x1c03 0x1>, + <0x400 &apps_smmu 0x1c04 0x1>, + <0x500 &apps_smmu 0x1c05 0x1>, + <0x600 &apps_smmu 0x1c06 0x1>, + <0x700 &apps_smmu 0x1c07 0x1>, + <0x800 &apps_smmu 0x1c08 0x1>, + <0x900 &apps_smmu 0x1c09 0x1>, + <0xa00 &apps_smmu 0x1c0a 0x1>, + <0xb00 &apps_smmu 0x1c0b 0x1>, + <0xc00 &apps_smmu 0x1c0c 0x1>, + <0xd00 &apps_smmu 0x1c0d 0x1>, + <0xe00 &apps_smmu 0x1c0e 0x1>, + <0xf00 &apps_smmu 0x1c0f 0x1>; + + resets = <&gcc GCC_PCIE_1_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_1_GDSC>; + + phys = <&pcie1_lane>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie1_phy: phy@1c0a000 { + compatible = "qcom,sdm845-qhp-pcie-phy"; + reg = <0 0x01c0a000 0 0x800>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_CLKREF_CLK>, + <&gcc GCC_PCIE_PHY_REFGEN_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "refgen"; + + resets = <&gcc GCC_PCIE_1_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE_PHY_REFGEN_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie1_lane: phy@1c06200 { + reg = <0 0x01c0a800 0 0x800>, + <0 0x01c0a800 0 0x800>, + <0 0x01c0b800 0 0x400>; + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; + clock-names = "pipe0"; + + #clock-cells = <0>; + #phy-cells = <0>; + clock-output-names = "pcie_1_pipe_clk"; + }; + }; + + mem_noc: interconnect@1380000 { + compatible = "qcom,sdm845-mem-noc"; + reg = <0 0x01380000 0 0x27200>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + dc_noc: interconnect@14e0000 { + compatible = "qcom,sdm845-dc-noc"; + reg = <0 0x014e0000 0 0x400>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + config_noc: interconnect@1500000 { + compatible = "qcom,sdm845-config-noc"; + reg = <0 0x01500000 0 0x5080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect@1620000 { + compatible = "qcom,sdm845-system-noc"; + reg = <0 0x01620000 0 0x18080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre1_noc: interconnect@16e0000 { + compatible = "qcom,sdm845-aggre1-noc"; + reg = <0 0x016e0000 0 0x15080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre2_noc: interconnect@1700000 { + compatible = "qcom,sdm845-aggre2-noc"; + reg = <0 0x01700000 0 0x1f300>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mmss_noc: interconnect@1740000 { + compatible = "qcom,sdm845-mmss-noc"; + reg = <0 0x01740000 0 0x1c100>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + ufs_mem_hc: ufshc@1d84000 { + compatible = "qcom,sdm845-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0 0x01d84000 0 0x2500>, + <0 0x01d90000 0 0x8000>; + reg-names = "std", "ice"; + interrupts = ; + phys = <&ufs_mem_phy_lanes>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + power-domains = <&gcc UFS_PHY_GDSC>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + iommus = <&apps_smmu 0x100 0xf>; + + clock-names = + "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk", + "ice_core_clk"; + clocks = + <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>, + <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; + freq-table-hz = + <50000000 200000000>, + <0 0>, + <0 0>, + <37500000 150000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>, + <75000000 300000000>; + + status = "disabled"; + }; + + ufs_mem_phy: phy@1d87000 { + compatible = "qcom,sdm845-qmp-ufs-phy"; + reg = <0 0x01d87000 0 0x18c>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clock-names = "ref", + "ref_aux"; + clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + status = "disabled"; + + ufs_mem_phy_lanes: phy@1d87400 { + reg = <0 0x01d87400 0 0x108>, + <0 0x01d87600 0 0x1e0>, + <0 0x01d87c00 0 0x1dc>, + <0 0x01d87800 0 0x108>, + <0 0x01d87a00 0 0x1e0>; + #phy-cells = <0>; + }; + }; + + cryptobam: dma-controller@1dc4000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0 0x01dc4000 0 0x24000>; + interrupts = ; + clocks = <&rpmhcc RPMH_CE_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + iommus = <&apps_smmu 0x704 0x1>, + <&apps_smmu 0x706 0x1>, + <&apps_smmu 0x714 0x1>, + <&apps_smmu 0x716 0x1>; + }; + + crypto: crypto@1dfa000 { + compatible = "qcom,crypto-v5.4"; + reg = <0 0x01dfa000 0 0x6000>; + clocks = <&gcc GCC_CE1_AHB_CLK>, + <&gcc GCC_CE1_AXI_CLK>, + <&rpmhcc RPMH_CE_CLK>; + clock-names = "iface", "bus", "core"; + dmas = <&cryptobam 6>, <&cryptobam 7>; + dma-names = "rx", "tx"; + iommus = <&apps_smmu 0x704 0x1>, + <&apps_smmu 0x706 0x1>, + <&apps_smmu 0x714 0x1>, + <&apps_smmu 0x716 0x1>; + }; + + ipa: ipa@1e40000 { + compatible = "qcom,sdm845-ipa"; + + iommus = <&apps_smmu 0x720 0x0>, + <&apps_smmu 0x722 0x0>; + reg = <0 0x1e40000 0 0x7000>, + <0 0x1e47000 0 0x2000>, + <0 0x1e04000 0 0x2c000>; + reg-names = "ipa-reg", + "ipa-shared", + "gsi"; + + interrupts-extended = <&intc GIC_SPI 311 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>, + <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ipa", + "gsi", + "ipa-clock-query", + "ipa-setup-ready"; + + clocks = <&rpmhcc RPMH_IPA_CLK>; + clock-names = "core"; + + interconnects = <&aggre2_noc MASTER_IPA 0 &mem_noc SLAVE_EBI1 0>, + <&aggre2_noc MASTER_IPA 0 &system_noc SLAVE_IMEM 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>; + interconnect-names = "memory", + "imem", + "config"; + + qcom,smem-states = <&ipa_smp2p_out 0>, + <&ipa_smp2p_out 1>; + qcom,smem-state-names = "ipa-clock-enabled-valid", + "ipa-clock-enabled"; + + status = "disabled"; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0 0x01f40000 0 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr_regs_1: syscon@1f60000 { + compatible = "qcom,sdm845-tcsr", "syscon"; + reg = <0 0x01f60000 0 0x20000>; + }; + + tlmm: pinctrl@3400000 { + compatible = "qcom,sdm845-pinctrl"; + reg = <0 0x03400000 0 0xc00000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 151>; + wakeup-parent = <&pdc_intc>; + + cci0_default: cci0-default { + /* SDA, SCL */ + pins = "gpio17", "gpio18"; + function = "cci_i2c"; + + bias-pull-up; + drive-strength = <2>; /* 2 mA */ + }; + + cci0_sleep: cci0-sleep { + /* SDA, SCL */ + pins = "gpio17", "gpio18"; + function = "cci_i2c"; + + drive-strength = <2>; /* 2 mA */ + bias-pull-down; + }; + + cci1_default: cci1-default { + /* SDA, SCL */ + pins = "gpio19", "gpio20"; + function = "cci_i2c"; + + bias-pull-up; + drive-strength = <2>; /* 2 mA */ + }; + + cci1_sleep: cci1-sleep { + /* SDA, SCL */ + pins = "gpio19", "gpio20"; + function = "cci_i2c"; + + drive-strength = <2>; /* 2 mA */ + bias-pull-down; + }; + + qspi_clk: qspi-clk { + pinmux { + pins = "gpio95"; + function = "qspi_clk"; + }; + }; + + qspi_cs0: qspi-cs0 { + pinmux { + pins = "gpio90"; + function = "qspi_cs"; + }; + }; + + qspi_cs1: qspi-cs1 { + pinmux { + pins = "gpio89"; + function = "qspi_cs"; + }; + }; + + qspi_data01: qspi-data01 { + pinmux-data { + pins = "gpio91", "gpio92"; + function = "qspi_data"; + }; + }; + + qspi_data12: qspi-data12 { + pinmux-data { + pins = "gpio93", "gpio94"; + function = "qspi_data"; + }; + }; + + qup_i2c0_default: qup-i2c0-default { + pinmux { + pins = "gpio0", "gpio1"; + function = "qup0"; + }; + }; + + qup_i2c1_default: qup-i2c1-default { + pinmux { + pins = "gpio17", "gpio18"; + function = "qup1"; + }; + }; + + qup_i2c2_default: qup-i2c2-default { + pinmux { + pins = "gpio27", "gpio28"; + function = "qup2"; + }; + }; + + qup_i2c3_default: qup-i2c3-default { + pinmux { + pins = "gpio41", "gpio42"; + function = "qup3"; + }; + }; + + qup_i2c4_default: qup-i2c4-default { + pinmux { + pins = "gpio89", "gpio90"; + function = "qup4"; + }; + }; + + qup_i2c5_default: qup-i2c5-default { + pinmux { + pins = "gpio85", "gpio86"; + function = "qup5"; + }; + }; + + qup_i2c6_default: qup-i2c6-default { + pinmux { + pins = "gpio45", "gpio46"; + function = "qup6"; + }; + }; + + qup_i2c7_default: qup-i2c7-default { + pinmux { + pins = "gpio93", "gpio94"; + function = "qup7"; + }; + }; + + qup_i2c8_default: qup-i2c8-default { + pinmux { + pins = "gpio65", "gpio66"; + function = "qup8"; + }; + }; + + qup_i2c9_default: qup-i2c9-default { + pinmux { + pins = "gpio6", "gpio7"; + function = "qup9"; + }; + }; + + qup_i2c10_default: qup-i2c10-default { + pinmux { + pins = "gpio55", "gpio56"; + function = "qup10"; + }; + }; + + qup_i2c11_default: qup-i2c11-default { + pinmux { + pins = "gpio31", "gpio32"; + function = "qup11"; + }; + }; + + qup_i2c12_default: qup-i2c12-default { + pinmux { + pins = "gpio49", "gpio50"; + function = "qup12"; + }; + }; + + qup_i2c13_default: qup-i2c13-default { + pinmux { + pins = "gpio105", "gpio106"; + function = "qup13"; + }; + }; + + qup_i2c14_default: qup-i2c14-default { + pinmux { + pins = "gpio33", "gpio34"; + function = "qup14"; + }; + }; + + qup_i2c15_default: qup-i2c15-default { + pinmux { + pins = "gpio81", "gpio82"; + function = "qup15"; + }; + }; + + qup_spi0_default: qup-spi0-default { + pinmux { + pins = "gpio0", "gpio1", + "gpio2", "gpio3"; + function = "qup0"; + }; + + config { + pins = "gpio0", "gpio1", + "gpio2", "gpio3"; + drive-strength = <6>; + bias-disable; + }; + }; + + qup_spi1_default: qup-spi1-default { + pinmux { + pins = "gpio17", "gpio18", + "gpio19", "gpio20"; + function = "qup1"; + }; + }; + + qup_spi2_default: qup-spi2-default { + pinmux { + pins = "gpio27", "gpio28", + "gpio29", "gpio30"; + function = "qup2"; + }; + }; + + qup_spi3_default: qup-spi3-default { + pinmux { + pins = "gpio41", "gpio42", + "gpio43", "gpio44"; + function = "qup3"; + }; + }; + + qup_spi4_default: qup-spi4-default { + pinmux { + pins = "gpio89", "gpio90", + "gpio91", "gpio92"; + function = "qup4"; + }; + }; + + qup_spi5_default: qup-spi5-default { + pinmux { + pins = "gpio85", "gpio86", + "gpio87", "gpio88"; + function = "qup5"; + }; + }; + + qup_spi6_default: qup-spi6-default { + pinmux { + pins = "gpio45", "gpio46", + "gpio47", "gpio48"; + function = "qup6"; + }; + }; + + qup_spi7_default: qup-spi7-default { + pinmux { + pins = "gpio93", "gpio94", + "gpio95", "gpio96"; + function = "qup7"; + }; + }; + + qup_spi8_default: qup-spi8-default { + pinmux { + pins = "gpio65", "gpio66", + "gpio67", "gpio68"; + function = "qup8"; + }; + }; + + qup_spi9_default: qup-spi9-default { + pinmux { + pins = "gpio6", "gpio7", + "gpio4", "gpio5"; + function = "qup9"; + }; + }; + + qup_spi10_default: qup-spi10-default { + pinmux { + pins = "gpio55", "gpio56", + "gpio53", "gpio54"; + function = "qup10"; + }; + }; + + qup_spi11_default: qup-spi11-default { + pinmux { + pins = "gpio31", "gpio32", + "gpio33", "gpio34"; + function = "qup11"; + }; + }; + + qup_spi12_default: qup-spi12-default { + pinmux { + pins = "gpio49", "gpio50", + "gpio51", "gpio52"; + function = "qup12"; + }; + }; + + qup_spi13_default: qup-spi13-default { + pinmux { + pins = "gpio105", "gpio106", + "gpio107", "gpio108"; + function = "qup13"; + }; + }; + + qup_spi14_default: qup-spi14-default { + pinmux { + pins = "gpio33", "gpio34", + "gpio31", "gpio32"; + function = "qup14"; + }; + }; + + qup_spi15_default: qup-spi15-default { + pinmux { + pins = "gpio81", "gpio82", + "gpio83", "gpio84"; + function = "qup15"; + }; + }; + + qup_uart0_default: qup-uart0-default { + pinmux { + pins = "gpio2", "gpio3"; + function = "qup0"; + }; + }; + + qup_uart1_default: qup-uart1-default { + pinmux { + pins = "gpio19", "gpio20"; + function = "qup1"; + }; + }; + + qup_uart2_default: qup-uart2-default { + pinmux { + pins = "gpio29", "gpio30"; + function = "qup2"; + }; + }; + + qup_uart3_default: qup-uart3-default { + pinmux { + pins = "gpio43", "gpio44"; + function = "qup3"; + }; + }; + + qup_uart4_default: qup-uart4-default { + pinmux { + pins = "gpio91", "gpio92"; + function = "qup4"; + }; + }; + + qup_uart5_default: qup-uart5-default { + pinmux { + pins = "gpio87", "gpio88"; + function = "qup5"; + }; + }; + + qup_uart6_default: qup-uart6-default { + pinmux { + pins = "gpio47", "gpio48"; + function = "qup6"; + }; + }; + + qup_uart7_default: qup-uart7-default { + pinmux { + pins = "gpio95", "gpio96"; + function = "qup7"; + }; + }; + + qup_uart8_default: qup-uart8-default { + pinmux { + pins = "gpio67", "gpio68"; + function = "qup8"; + }; + }; + + qup_uart9_default: qup-uart9-default { + pinmux { + pins = "gpio4", "gpio5"; + function = "qup9"; + }; + }; + + qup_uart10_default: qup-uart10-default { + pinmux { + pins = "gpio53", "gpio54"; + function = "qup10"; + }; + }; + + qup_uart11_default: qup-uart11-default { + pinmux { + pins = "gpio33", "gpio34"; + function = "qup11"; + }; + }; + + qup_uart12_default: qup-uart12-default { + pinmux { + pins = "gpio51", "gpio52"; + function = "qup12"; + }; + }; + + qup_uart13_default: qup-uart13-default { + pinmux { + pins = "gpio107", "gpio108"; + function = "qup13"; + }; + }; + + qup_uart14_default: qup-uart14-default { + pinmux { + pins = "gpio31", "gpio32"; + function = "qup14"; + }; + }; + + qup_uart15_default: qup-uart15-default { + pinmux { + pins = "gpio83", "gpio84"; + function = "qup15"; + }; + }; + + quat_mi2s_sleep: quat_mi2s_sleep { + mux { + pins = "gpio58", "gpio59"; + function = "gpio"; + }; + + config { + pins = "gpio58", "gpio59"; + drive-strength = <2>; + bias-pull-down; + input-enable; + }; + }; + + quat_mi2s_active: quat_mi2s_active { + mux { + pins = "gpio58", "gpio59"; + function = "qua_mi2s"; + }; + + config { + pins = "gpio58", "gpio59"; + drive-strength = <8>; + bias-disable; + output-high; + }; + }; + + quat_mi2s_sd0_sleep: quat_mi2s_sd0_sleep { + mux { + pins = "gpio60"; + function = "gpio"; + }; + + config { + pins = "gpio60"; + drive-strength = <2>; + bias-pull-down; + input-enable; + }; + }; + + quat_mi2s_sd0_active: quat_mi2s_sd0_active { + mux { + pins = "gpio60"; + function = "qua_mi2s"; + }; + + config { + pins = "gpio60"; + drive-strength = <8>; + bias-disable; + }; + }; + + quat_mi2s_sd1_sleep: quat_mi2s_sd1_sleep { + mux { + pins = "gpio61"; + function = "gpio"; + }; + + config { + pins = "gpio61"; + drive-strength = <2>; + bias-pull-down; + input-enable; + }; + }; + + quat_mi2s_sd1_active: quat_mi2s_sd1_active { + mux { + pins = "gpio61"; + function = "qua_mi2s"; + }; + + config { + pins = "gpio61"; + drive-strength = <8>; + bias-disable; + }; + }; + + quat_mi2s_sd2_sleep: quat_mi2s_sd2_sleep { + mux { + pins = "gpio62"; + function = "gpio"; + }; + + config { + pins = "gpio62"; + drive-strength = <2>; + bias-pull-down; + input-enable; + }; + }; + + quat_mi2s_sd2_active: quat_mi2s_sd2_active { + mux { + pins = "gpio62"; + function = "qua_mi2s"; + }; + + config { + pins = "gpio62"; + drive-strength = <8>; + bias-disable; + }; + }; + + quat_mi2s_sd3_sleep: quat_mi2s_sd3_sleep { + mux { + pins = "gpio63"; + function = "gpio"; + }; + + config { + pins = "gpio63"; + drive-strength = <2>; + bias-pull-down; + input-enable; + }; + }; + + quat_mi2s_sd3_active: quat_mi2s_sd3_active { + mux { + pins = "gpio63"; + function = "qua_mi2s"; + }; + + config { + pins = "gpio63"; + drive-strength = <8>; + bias-disable; + }; + }; + }; + + mss_pil: remoteproc@4080000 { + compatible = "qcom,sdm845-mss-pil"; + reg = <0 0x04080000 0 0x408>, <0 0x04180000 0 0x48>; + reg-names = "qdsp6", "rmb"; + + interrupts-extended = + <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack", + "shutdown-ack"; + + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>, + <&gcc GCC_BOOT_ROM_AHB_CLK>, + <&gcc GCC_MSS_GPLL0_DIV_CLK_SRC>, + <&gcc GCC_MSS_SNOC_AXI_CLK>, + <&gcc GCC_MSS_MFAB_AXIS_CLK>, + <&gcc GCC_PRNG_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "bus", "mem", "gpll0_mss", + "snoc_axi", "mnoc_axi", "prng", "xo"; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + resets = <&aoss_reset AOSS_CC_MSS_RESTART>, + <&pdc_reset PDC_MODEM_SYNC_RESET>; + reset-names = "mss_restart", "pdc_reset"; + + qcom,halt-regs = <&tcsr_regs_1 0x3000 0x5000 0x4000>; + + power-domains = <&rpmhpd SDM845_CX>, + <&rpmhpd SDM845_MX>, + <&rpmhpd SDM845_MSS>; + power-domain-names = "cx", "mx", "mss"; + + status = "disabled"; + + mba { + memory-region = <&mba_region>; + }; + + mpss { + memory-region = <&mpss_region>; + }; + + glink-edge { + interrupts = ; + label = "modem"; + qcom,remote-pid = <1>; + mboxes = <&apss_shared 12>; + }; + }; + + gpucc: clock-controller@5090000 { + compatible = "qcom,sdm845-gpucc"; + reg = <0 0x05090000 0 0x9000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + clock-names = "bi_tcxo", + "gcc_gpu_gpll0_clk_src", + "gcc_gpu_gpll0_div_clk_src"; + }; + + stm@6002000 { + compatible = "arm,coresight-stm", "arm,primecell"; + reg = <0 0x06002000 0 0x1000>, + <0 0x16280000 0 0x180000>; + reg-names = "stm-base", "stm-stimulus-base"; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + stm_out: endpoint { + remote-endpoint = + <&funnel0_in7>; + }; + }; + }; + }; + + funnel@6041000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06041000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel0_out: endpoint { + remote-endpoint = + <&merge_funnel_in0>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@7 { + reg = <7>; + funnel0_in7: endpoint { + remote-endpoint = <&stm_out>; + }; + }; + }; + }; + + funnel@6043000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06043000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel2_out: endpoint { + remote-endpoint = + <&merge_funnel_in2>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@5 { + reg = <5>; + funnel2_in5: endpoint { + remote-endpoint = + <&apss_merge_funnel_out>; + }; + }; + }; + }; + + funnel@6045000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06045000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + merge_funnel_out: endpoint { + remote-endpoint = <&etf_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + merge_funnel_in0: endpoint { + remote-endpoint = + <&funnel0_out>; + }; + }; + + port@2 { + reg = <2>; + merge_funnel_in2: endpoint { + remote-endpoint = + <&funnel2_out>; + }; + }; + }; + }; + + replicator@6046000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0 0x06046000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + replicator_out: endpoint { + remote-endpoint = <&etr_in>; + }; + }; + }; + + in-ports { + port { + replicator_in: endpoint { + remote-endpoint = <&etf_out>; + }; + }; + }; + }; + + etf@6047000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x06047000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + etf_out: endpoint { + remote-endpoint = + <&replicator_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + etf_in: endpoint { + remote-endpoint = + <&merge_funnel_out>; + }; + }; + }; + }; + + etr@6048000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x06048000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,scatter-gather; + + in-ports { + port { + etr_in: endpoint { + remote-endpoint = + <&replicator_out>; + }; + }; + }; + }; + + etm@7040000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07040000 0 0x1000>; + + cpu = <&CPU0>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = + <&apss_funnel_in0>; + }; + }; + }; + }; + + etm@7140000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07140000 0 0x1000>; + + cpu = <&CPU1>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = + <&apss_funnel_in1>; + }; + }; + }; + }; + + etm@7240000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07240000 0 0x1000>; + + cpu = <&CPU2>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = + <&apss_funnel_in2>; + }; + }; + }; + }; + + etm@7340000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07340000 0 0x1000>; + + cpu = <&CPU3>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = + <&apss_funnel_in3>; + }; + }; + }; + }; + + etm@7440000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07440000 0 0x1000>; + + cpu = <&CPU4>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + + out-ports { + port { + etm4_out: endpoint { + remote-endpoint = + <&apss_funnel_in4>; + }; + }; + }; + }; + + etm@7540000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07540000 0 0x1000>; + + cpu = <&CPU5>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + + out-ports { + port { + etm5_out: endpoint { + remote-endpoint = + <&apss_funnel_in5>; + }; + }; + }; + }; + + etm@7640000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07640000 0 0x1000>; + + cpu = <&CPU6>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + + out-ports { + port { + etm6_out: endpoint { + remote-endpoint = + <&apss_funnel_in6>; + }; + }; + }; + }; + + etm@7740000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07740000 0 0x1000>; + + cpu = <&CPU7>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + + out-ports { + port { + etm7_out: endpoint { + remote-endpoint = + <&apss_funnel_in7>; + }; + }; + }; + }; + + funnel@7800000 { /* APSS Funnel */ + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x07800000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + apss_funnel_out: endpoint { + remote-endpoint = + <&apss_merge_funnel_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + apss_funnel_in0: endpoint { + remote-endpoint = + <&etm0_out>; + }; + }; + + port@1 { + reg = <1>; + apss_funnel_in1: endpoint { + remote-endpoint = + <&etm1_out>; + }; + }; + + port@2 { + reg = <2>; + apss_funnel_in2: endpoint { + remote-endpoint = + <&etm2_out>; + }; + }; + + port@3 { + reg = <3>; + apss_funnel_in3: endpoint { + remote-endpoint = + <&etm3_out>; + }; + }; + + port@4 { + reg = <4>; + apss_funnel_in4: endpoint { + remote-endpoint = + <&etm4_out>; + }; + }; + + port@5 { + reg = <5>; + apss_funnel_in5: endpoint { + remote-endpoint = + <&etm5_out>; + }; + }; + + port@6 { + reg = <6>; + apss_funnel_in6: endpoint { + remote-endpoint = + <&etm6_out>; + }; + }; + + port@7 { + reg = <7>; + apss_funnel_in7: endpoint { + remote-endpoint = + <&etm7_out>; + }; + }; + }; + }; + + funnel@7810000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x07810000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + apss_merge_funnel_out: endpoint { + remote-endpoint = + <&funnel2_in5>; + }; + }; + }; + + in-ports { + port { + apss_merge_funnel_in: endpoint { + remote-endpoint = + <&apss_funnel_out>; + }; + }; + }; + }; + + sdhc_2: mmc@8804000 { + compatible = "qcom,sdm845-sdhci", "qcom,sdhci-msm-v5"; + reg = <0 0x08804000 0 0x1000>; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "core", "xo"; + iommus = <&apps_smmu 0xa0 0xf>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&sdhc2_opp_table>; + + status = "disabled"; + + sdhc2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-9600000 { + opp-hz = /bits/ 64 <9600000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-201500000 { + opp-hz = /bits/ 64 <201500000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + qspi_opp_table: opp-table-qspi { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-150000000 { + opp-hz = /bits/ 64 <150000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + + qspi: spi@88df000 { + compatible = "qcom,sdm845-qspi", "qcom,qspi-v1"; + reg = <0 0x088df000 0 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>, + <&gcc GCC_QSPI_CORE_CLK>; + clock-names = "iface", "core"; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qspi_opp_table>; + status = "disabled"; + }; + + slim: slim@171c0000 { + compatible = "qcom,slim-ngd-v2.1.0"; + reg = <0 0x171c0000 0 0x2c000>; + interrupts = ; + + qcom,apps-ch-pipes = <0x780000>; + qcom,ea-pc = <0x270>; + status = "okay"; + dmas = <&slimbam 3>, <&slimbam 4>, + <&slimbam 5>, <&slimbam 6>; + dma-names = "rx", "tx", "tx2", "rx2"; + + iommus = <&apps_smmu 0x1806 0x0>; + #address-cells = <1>; + #size-cells = <0>; + + ngd@1 { + reg = <1>; + #address-cells = <2>; + #size-cells = <0>; + + wcd9340_ifd: ifd@0{ + compatible = "slim217,250"; + reg = <0 0>; + }; + + wcd9340: codec@1{ + compatible = "slim217,250"; + reg = <1 0>; + slim-ifc-dev = <&wcd9340_ifd>; + + #sound-dai-cells = <1>; + + interrupts-extended = <&tlmm 54 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + #clock-cells = <0>; + clock-frequency = <9600000>; + clock-output-names = "mclk"; + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + + #address-cells = <1>; + #size-cells = <1>; + + wcdgpio: gpio-controller@42 { + compatible = "qcom,wcd9340-gpio"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x42 0x2>; + }; + + swm: swm@c85 { + compatible = "qcom,soundwire-v1.3.0"; + reg = <0xc85 0x40>; + interrupts-extended = <&wcd9340 20>; + + qcom,dout-ports = <6>; + qcom,din-ports = <2>; + qcom,ports-sinterval-low =/bits/ 8 <0x07 0x1F 0x3F 0x7 0x1F 0x3F 0x0F 0x0F>; + qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0C 0x6 0x12 0x0D 0x07 0x0A >; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x1F 0x00 0x00 0x1F 0x00 0x00>; + + #sound-dai-cells = <1>; + clocks = <&wcd9340>; + clock-names = "iface"; + #address-cells = <2>; + #size-cells = <0>; + + + }; + }; + }; + }; + + lmh_cluster1: lmh@17d70800 { + compatible = "qcom,sdm845-lmh"; + reg = <0 0x17d70800 0 0x400>; + interrupts = ; + cpus = <&CPU4>; + qcom,lmh-temp-arm-millicelsius = <65000>; + qcom,lmh-temp-low-millicelsius = <94500>; + qcom,lmh-temp-high-millicelsius = <95000>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + lmh_cluster0: lmh@17d78800 { + compatible = "qcom,sdm845-lmh"; + reg = <0 0x17d78800 0 0x400>; + interrupts = ; + cpus = <&CPU0>; + qcom,lmh-temp-arm-millicelsius = <65000>; + qcom,lmh-temp-low-millicelsius = <94500>; + qcom,lmh-temp-high-millicelsius = <95000>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + sound: sound { + }; + + usb_1_hsphy: phy@88e2000 { + compatible = "qcom,sdm845-qusb2-phy", "qcom,qusb2-v2-phy"; + reg = <0 0x088e2000 0 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + + nvmem-cells = <&qusb2p_hstx_trim>; + }; + + usb_2_hsphy: phy@88e3000 { + compatible = "qcom,sdm845-qusb2-phy", "qcom,qusb2-v2-phy"; + reg = <0 0x088e3000 0 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; + + nvmem-cells = <&qusb2s_hstx_trim>; + }; + + usb_1_qmpphy: phy@88e9000 { + compatible = "qcom,sdm845-qmp-usb3-phy"; + reg = <0 0x088e9000 0 0x18c>, + <0 0x088e8000 0 0x10>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "com_aux"; + + resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, + <&gcc GCC_USB3_PHY_PRIM_BCR>; + reset-names = "phy", "common"; + + usb_1_ssphy: phy@88e9200 { + reg = <0 0x088e9200 0 0x128>, + <0 0x088e9400 0 0x200>, + <0 0x088e9c00 0 0x218>, + <0 0x088e9600 0 0x128>, + <0 0x088e9800 0 0x200>, + <0 0x088e9a00 0 0x100>; + #clock-cells = <0>; + #phy-cells = <0>; + clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_phy_pipe_clk_src"; + }; + }; + + usb_2_qmpphy: phy@88eb000 { + compatible = "qcom,sdm845-qmp-usb3-uni-phy"; + reg = <0 0x088eb000 0 0x18c>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_USB3_SEC_CLKREF_CLK>, + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "com_aux"; + + resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>, + <&gcc GCC_USB3_PHY_SEC_BCR>; + reset-names = "phy", "common"; + + usb_2_ssphy: phy@88eb200 { + reg = <0 0x088eb200 0 0x128>, + <0 0x088eb400 0 0x1fc>, + <0 0x088eb800 0 0x218>, + <0 0x088eb600 0 0x70>; + #clock-cells = <0>; + #phy-cells = <0>; + clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_uni_phy_pipe_clk_src"; + }; + }; + + usb_1: usb@a6f8800 { + compatible = "qcom,sdm845-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + dma-ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <150000000>; + + interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>, + <&pdc_intc 8 IRQ_TYPE_EDGE_BOTH>, + <&pdc_intc 9 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "hs_phy_irq", "ss_phy_irq", + "dm_hs_phy_irq", "dp_hs_phy_irq"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + interconnects = <&aggre2_noc MASTER_USB3_0 0 &mem_noc SLAVE_EBI1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>; + interconnect-names = "usb-ddr", "apps-usb"; + + usb_1_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xcd00>; + interrupts = ; + iommus = <&apps_smmu 0x740 0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + usb_2: usb@a8f8800 { + compatible = "qcom,sdm845-dwc3", "qcom,dwc3"; + reg = <0 0x0a8f8800 0 0x400>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + dma-ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_SLEEP_CLK>, + <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>; + assigned-clock-rates = <19200000>, <150000000>; + + interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>, + <&pdc_intc 10 IRQ_TYPE_EDGE_BOTH>, + <&pdc_intc 11 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "hs_phy_irq", "ss_phy_irq", + "dm_hs_phy_irq", "dp_hs_phy_irq"; + + power-domains = <&gcc USB30_SEC_GDSC>; + + resets = <&gcc GCC_USB30_SEC_BCR>; + + interconnects = <&aggre2_noc MASTER_USB3_1 0 &mem_noc SLAVE_EBI1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>; + interconnect-names = "usb-ddr", "apps-usb"; + + usb_2_dwc3: usb@a800000 { + compatible = "snps,dwc3"; + reg = <0 0x0a800000 0 0xcd00>; + interrupts = ; + iommus = <&apps_smmu 0x760 0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_2_hsphy>, <&usb_2_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + venus: video-codec@aa00000 { + compatible = "qcom,sdm845-venus-v2"; + reg = <0 0x0aa00000 0 0xff000>; + interrupts = ; + power-domains = <&videocc VENUS_GDSC>, + <&videocc VCODEC0_GDSC>, + <&videocc VCODEC1_GDSC>, + <&rpmhpd SDM845_CX>; + power-domain-names = "venus", "vcodec0", "vcodec1", "cx"; + operating-points-v2 = <&venus_opp_table>; + clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>, + <&videocc VIDEO_CC_VENUS_AHB_CLK>, + <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>, + <&videocc VIDEO_CC_VCODEC0_CORE_CLK>, + <&videocc VIDEO_CC_VCODEC0_AXI_CLK>, + <&videocc VIDEO_CC_VCODEC1_CORE_CLK>, + <&videocc VIDEO_CC_VCODEC1_AXI_CLK>; + clock-names = "core", "iface", "bus", + "vcodec0_core", "vcodec0_bus", + "vcodec1_core", "vcodec1_bus"; + iommus = <&apps_smmu 0x10a0 0x8>, + <&apps_smmu 0x10b0 0x0>; + memory-region = <&venus_mem>; + interconnects = <&mmss_noc MASTER_VIDEO_P0 0 &mem_noc SLAVE_EBI1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_VENUS_CFG 0>; + interconnect-names = "video-mem", "cpu-cfg"; + + status = "disabled"; + + video-core0 { + compatible = "venus-decoder"; + }; + + video-core1 { + compatible = "venus-encoder"; + }; + + venus_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-320000000 { + opp-hz = /bits/ 64 <320000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-380000000 { + opp-hz = /bits/ 64 <380000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-444000000 { + opp-hz = /bits/ 64 <444000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + + opp-533000097 { + opp-hz = /bits/ 64 <533000097>; + required-opps = <&rpmhpd_opp_turbo>; + }; + }; + }; + + videocc: clock-controller@ab00000 { + compatible = "qcom,sdm845-videocc"; + reg = <0 0x0ab00000 0 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "bi_tcxo"; + #clock-cells = <1>; + #power-domain-cells = <1>; + #reset-cells = <1>; + }; + + camss: camss@acb3000 { + compatible = "qcom,sdm845-camss"; + + reg = <0 0xacb3000 0 0x1000>, + <0 0xacba000 0 0x1000>, + <0 0xacc8000 0 0x1000>, + <0 0xac65000 0 0x1000>, + <0 0xac66000 0 0x1000>, + <0 0xac67000 0 0x1000>, + <0 0xac68000 0 0x1000>, + <0 0xacaf000 0 0x4000>, + <0 0xacb6000 0 0x4000>, + <0 0xacc4000 0 0x4000>; + reg-names = "csid0", + "csid1", + "csid2", + "csiphy0", + "csiphy1", + "csiphy2", + "csiphy3", + "vfe0", + "vfe1", + "vfe_lite"; + + interrupts = , + , + , + , + , + , + , + , + , + ; + interrupt-names = "csid0", + "csid1", + "csid2", + "csiphy0", + "csiphy1", + "csiphy2", + "csiphy3", + "vfe0", + "vfe1", + "vfe_lite"; + + power-domains = <&clock_camcc IFE_0_GDSC>, + <&clock_camcc IFE_1_GDSC>, + <&clock_camcc TITAN_TOP_GDSC>; + + clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>, + <&clock_camcc CAM_CC_CPAS_AHB_CLK>, + <&clock_camcc CAM_CC_CPHY_RX_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_0_CSID_CLK>, + <&clock_camcc CAM_CC_IFE_0_CSID_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_1_CSID_CLK>, + <&clock_camcc CAM_CC_IFE_1_CSID_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_LITE_CSID_CLK>, + <&clock_camcc CAM_CC_IFE_LITE_CSID_CLK_SRC>, + <&clock_camcc CAM_CC_CSIPHY0_CLK>, + <&clock_camcc CAM_CC_CSI0PHYTIMER_CLK>, + <&clock_camcc CAM_CC_CSI0PHYTIMER_CLK_SRC>, + <&clock_camcc CAM_CC_CSIPHY1_CLK>, + <&clock_camcc CAM_CC_CSI1PHYTIMER_CLK>, + <&clock_camcc CAM_CC_CSI1PHYTIMER_CLK_SRC>, + <&clock_camcc CAM_CC_CSIPHY2_CLK>, + <&clock_camcc CAM_CC_CSI2PHYTIMER_CLK>, + <&clock_camcc CAM_CC_CSI2PHYTIMER_CLK_SRC>, + <&clock_camcc CAM_CC_CSIPHY3_CLK>, + <&clock_camcc CAM_CC_CSI3PHYTIMER_CLK>, + <&clock_camcc CAM_CC_CSI3PHYTIMER_CLK_SRC>, + <&gcc GCC_CAMERA_AHB_CLK>, + <&gcc GCC_CAMERA_AXI_CLK>, + <&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>, + <&clock_camcc CAM_CC_SOC_AHB_CLK>, + <&clock_camcc CAM_CC_IFE_0_AXI_CLK>, + <&clock_camcc CAM_CC_IFE_0_CLK>, + <&clock_camcc CAM_CC_IFE_0_CPHY_RX_CLK>, + <&clock_camcc CAM_CC_IFE_0_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_1_AXI_CLK>, + <&clock_camcc CAM_CC_IFE_1_CLK>, + <&clock_camcc CAM_CC_IFE_1_CPHY_RX_CLK>, + <&clock_camcc CAM_CC_IFE_1_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_LITE_CLK>, + <&clock_camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>, + <&clock_camcc CAM_CC_IFE_LITE_CLK_SRC>; + clock-names = "camnoc_axi", + "cpas_ahb", + "cphy_rx_src", + "csi0", + "csi0_src", + "csi1", + "csi1_src", + "csi2", + "csi2_src", + "csiphy0", + "csiphy0_timer", + "csiphy0_timer_src", + "csiphy1", + "csiphy1_timer", + "csiphy1_timer_src", + "csiphy2", + "csiphy2_timer", + "csiphy2_timer_src", + "csiphy3", + "csiphy3_timer", + "csiphy3_timer_src", + "gcc_camera_ahb", + "gcc_camera_axi", + "slow_ahb_src", + "soc_ahb", + "vfe0_axi", + "vfe0", + "vfe0_cphy_rx", + "vfe0_src", + "vfe1_axi", + "vfe1", + "vfe1_cphy_rx", + "vfe1_src", + "vfe_lite", + "vfe_lite_cphy_rx", + "vfe_lite_src"; + + iommus = <&apps_smmu 0x0808 0x0>, + <&apps_smmu 0x0810 0x8>, + <&apps_smmu 0x0c08 0x0>, + <&apps_smmu 0x0c10 0x8>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + cci: cci@ac4a000 { + compatible = "qcom,sdm845-cci"; + #address-cells = <1>; + #size-cells = <0>; + + reg = <0 0x0ac4a000 0 0x4000>; + interrupts = ; + power-domains = <&clock_camcc TITAN_TOP_GDSC>; + + clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>, + <&clock_camcc CAM_CC_SOC_AHB_CLK>, + <&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>, + <&clock_camcc CAM_CC_CPAS_AHB_CLK>, + <&clock_camcc CAM_CC_CCI_CLK>, + <&clock_camcc CAM_CC_CCI_CLK_SRC>; + clock-names = "camnoc_axi", + "soc_ahb", + "slow_ahb_src", + "cpas_ahb", + "cci", + "cci_src"; + + assigned-clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>, + <&clock_camcc CAM_CC_CCI_CLK>; + assigned-clock-rates = <80000000>, <37500000>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cci0_default &cci1_default>; + pinctrl-1 = <&cci0_sleep &cci1_sleep>; + + status = "disabled"; + + cci_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + clock_camcc: clock-controller@ad00000 { + compatible = "qcom,sdm845-camcc"; + reg = <0 0x0ad00000 0 0x10000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "bi_tcxo"; + }; + + dsi_opp_table: opp-table-dsi { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-180000000 { + opp-hz = /bits/ 64 <180000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-275000000 { + opp-hz = /bits/ 64 <275000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-328580000 { + opp-hz = /bits/ 64 <328580000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + + mdss: mdss@ae00000 { + compatible = "qcom,sdm845-mdss"; + reg = <0 0x0ae00000 0 0x1000>; + reg-names = "mdss"; + + power-domains = <&dispcc MDSS_GDSC>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "core"; + + interrupts = ; + interrupt-controller; + #interrupt-cells = <1>; + + interconnects = <&mmss_noc MASTER_MDP0 0 &mem_noc SLAVE_EBI1 0>, + <&mmss_noc MASTER_MDP1 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "mdp0-mem", "mdp1-mem"; + + iommus = <&apps_smmu 0x880 0x8>, + <&apps_smmu 0xc80 0x8>; + + status = "disabled"; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + mdss_mdp: display-controller@ae01000 { + compatible = "qcom,sdm845-dpu"; + reg = <0 0x0ae01000 0 0x8f000>, + <0 0x0aeb0000 0 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "gcc-bus", "iface", "bus", "core", "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd SDM845_CX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-171428571 { + opp-hz = /bits/ 64 <171428571>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-344000000 { + opp-hz = /bits/ 64 <344000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-430000000 { + opp-hz = /bits/ 64 <430000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + dsi0: dsi@ae94000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae94000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SDM845_CX>; + + phys = <&dsi0_phy>; + phy-names = "dsi"; + + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + }; + + dsi0_phy: dsi-phy@ae94400 { + compatible = "qcom,dsi-phy-10nm"; + reg = <0 0x0ae94400 0 0x200>, + <0 0x0ae94600 0 0x280>, + <0 0x0ae94a00 0 0x1e0>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + + dsi1: dsi@ae96000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae96000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, + <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK>, + <&dispcc DISP_CC_MDSS_ESC1_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; + assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SDM845_CX>; + + phys = <&dsi1_phy>; + phy-names = "dsi"; + + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi1_in: endpoint { + remote-endpoint = <&dpu_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + dsi1_out: endpoint { + }; + }; + }; + }; + + dsi1_phy: dsi-phy@ae96400 { + compatible = "qcom,dsi-phy-10nm"; + reg = <0 0x0ae96400 0 0x200>, + <0 0x0ae96600 0 0x280>, + <0 0x0ae96a00 0 0x10e>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + }; + + gpu: gpu@5000000 { + compatible = "qcom,adreno-630.2", "qcom,adreno"; + + reg = <0 0x5000000 0 0x40000>, <0 0x509e000 0 0x10>; + reg-names = "kgsl_3d0_reg_memory", "cx_mem"; + + /* + * Look ma, no clocks! The GPU clocks and power are + * controlled entirely by the GMU + */ + + interrupts = ; + + iommus = <&adreno_smmu 0>; + + operating-points-v2 = <&gpu_opp_table>; + + qcom,gmu = <&gmu>; + + interconnects = <&mem_noc MASTER_GFX3D 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "gfx-mem"; + + status = "disabled"; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-710000000 { + opp-hz = /bits/ 64 <710000000>; + opp-level = ; + opp-peak-kBps = <7216000>; + }; + + opp-675000000 { + opp-hz = /bits/ 64 <675000000>; + opp-level = ; + opp-peak-kBps = <7216000>; + }; + + opp-596000000 { + opp-hz = /bits/ 64 <596000000>; + opp-level = ; + opp-peak-kBps = <6220000>; + }; + + opp-520000000 { + opp-hz = /bits/ 64 <520000000>; + opp-level = ; + opp-peak-kBps = <6220000>; + }; + + opp-414000000 { + opp-hz = /bits/ 64 <414000000>; + opp-level = ; + opp-peak-kBps = <4068000>; + }; + + opp-342000000 { + opp-hz = /bits/ 64 <342000000>; + opp-level = ; + opp-peak-kBps = <2724000>; + }; + + opp-257000000 { + opp-hz = /bits/ 64 <257000000>; + opp-level = ; + opp-peak-kBps = <1648000>; + }; + }; + }; + + adreno_smmu: iommu@5040000 { + compatible = "qcom,sdm845-smmu-v2", "qcom,adreno-smmu", "qcom,smmu-v2"; + reg = <0 0x5040000 0 0x10000>; + #iommu-cells = <1>; + #global-interrupts = <2>; + interrupts = , + , + , + , + , + , + , + , + , + ; + clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gcc GCC_GPU_CFG_AHB_CLK>; + clock-names = "bus", "iface"; + + power-domains = <&gpucc GPU_CX_GDSC>; + }; + + gmu: gmu@506a000 { + compatible = "qcom,adreno-gmu-630.2", "qcom,adreno-gmu"; + + reg = <0 0x506a000 0 0x30000>, + <0 0xb280000 0 0x10000>, + <0 0xb480000 0 0x10000>; + reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq"; + + interrupts = , + ; + interrupt-names = "hfi", "gmu"; + + clocks = <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_CXO_CLK>, + <&gcc GCC_DDRSS_GPU_AXI_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>; + clock-names = "gmu", "cxo", "axi", "memnoc"; + + power-domains = <&gpucc GPU_CX_GDSC>, + <&gpucc GPU_GX_GDSC>; + power-domain-names = "cx", "gx"; + + iommus = <&adreno_smmu 5>; + + operating-points-v2 = <&gmu_opp_table>; + + status = "disabled"; + + gmu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-level = ; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-level = ; + }; + }; + }; + + dispcc: clock-controller@af00000 { + compatible = "qcom,sdm845-dispcc"; + reg = <0 0x0af00000 0 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_DISP_GPLL0_CLK_SRC>, + <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>, + <&dsi0_phy 0>, + <&dsi0_phy 1>, + <&dsi1_phy 0>, + <&dsi1_phy 1>, + <0>, + <0>; + clock-names = "bi_tcxo", + "gcc_disp_gpll0_clk_src", + "gcc_disp_gpll0_div_clk_src", + "dsi0_phy_pll_out_byteclk", + "dsi0_phy_pll_out_dsiclk", + "dsi1_phy_pll_out_byteclk", + "dsi1_phy_pll_out_dsiclk", + "dp_link_clk_divsel_ten", + "dp_vco_divided_clk_src_mux"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + pdc_intc: interrupt-controller@b220000 { + compatible = "qcom,sdm845-pdc", "qcom,pdc"; + reg = <0 0x0b220000 0 0x30000>; + qcom,pdc-ranges = <0 480 94>, <94 609 15>, <115 630 7>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + pdc_reset: reset-controller@b2e0000 { + compatible = "qcom,sdm845-pdc-global"; + reg = <0 0x0b2e0000 0 0x20000>; + #reset-cells = <1>; + }; + + tsens0: thermal-sensor@c263000 { + compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; + reg = <0 0x0c263000 0 0x1ff>, /* TM */ + <0 0x0c222000 0 0x1ff>; /* SROT */ + #qcom,sensors = <13>; + interrupts = , + ; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c265000 { + compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; + reg = <0 0x0c265000 0 0x1ff>, /* TM */ + <0 0x0c223000 0 0x1ff>; /* SROT */ + #qcom,sensors = <8>; + interrupts = , + ; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + aoss_reset: reset-controller@c2a0000 { + compatible = "qcom,sdm845-aoss-cc"; + reg = <0 0x0c2a0000 0 0x31000>; + #reset-cells = <1>; + }; + + aoss_qmp: power-controller@c300000 { + compatible = "qcom,sdm845-aoss-qmp", "qcom,aoss-qmp"; + reg = <0 0x0c300000 0 0x400>; + interrupts = ; + mboxes = <&apss_shared 0>; + + #clock-cells = <0>; + + cx_cdev: cx { + #cooling-cells = <2>; + }; + + ebi_cdev: ebi { + #cooling-cells = <2>; + }; + }; + + sram@c3f0000 { + compatible = "qcom,sdm845-rpmh-stats"; + reg = <0 0x0c3f0000 0 0x400>; + }; + + spmi_bus: spmi@c440000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0 0x0c440000 0 0x1100>, + <0 0x0c600000 0 0x2000000>, + <0 0x0e600000 0 0x100000>, + <0 0x0e700000 0 0xa0000>, + <0 0x0c40a000 0 0x26000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = ; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + cell-index = <0>; + }; + + sram@146bf000 { + compatible = "qcom,sdm845-imem", "syscon", "simple-mfd"; + reg = <0 0x146bf000 0 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0 0 0x146bf000 0x1000>; + + pil-reloc@94c { + compatible = "qcom,pil-reloc-info"; + reg = <0x94c 0xc8>; + }; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,sdm845-smmu-500", "arm,mmu-500"; + reg = <0 0x15000000 0 0x80000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + }; + + lpasscc: clock-controller@17014000 { + compatible = "qcom,sdm845-lpasscc"; + reg = <0 0x17014000 0 0x1f004>, <0 0x17300000 0 0x200>; + reg-names = "cc", "qdsp6ss"; + #clock-cells = <1>; + status = "disabled"; + }; + + gladiator_noc: interconnect@17900000 { + compatible = "qcom,sdm845-gladiator-noc"; + reg = <0 0x17900000 0 0xd080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + watchdog@17980000 { + compatible = "qcom,apss-wdt-sdm845", "qcom,kpss-wdt"; + reg = <0 0x17980000 0 0x1000>; + clocks = <&sleep_clk>; + interrupts = ; + }; + + apss_shared: mailbox@17990000 { + compatible = "qcom,sdm845-apss-shared"; + reg = <0 0x17990000 0 0x1000>; + #mbox-cells = <1>; + }; + + apps_rsc: rsc@179c0000 { + label = "apps_rsc"; + compatible = "qcom,rpmh-rsc"; + reg = <0 0x179c0000 0 0x10000>, + <0 0x179d0000 0 0x10000>, + <0 0x179e0000 0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = , + , + ; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = , + , + , + ; + power-domains = <&CLUSTER_PD>; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + + rpmhcc: clock-controller { + compatible = "qcom,sdm845-rpmh-clk"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board>; + }; + + rpmhpd: power-controller { + compatible = "qcom,sdm845-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = ; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = ; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = ; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = ; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = ; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = ; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = ; + }; + + rpmhpd_opp_nom_l2: opp8 { + opp-level = ; + }; + + rpmhpd_opp_turbo: opp9 { + opp-level = ; + }; + + rpmhpd_opp_turbo_l1: opp10 { + opp-level = ; + }; + }; + }; + }; + + intc: interrupt-controller@17a00000 { + compatible = "arm,gic-v3"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0 0x17a00000 0 0x10000>, /* GICD */ + <0 0x17a60000 0 0x100000>; /* GICR * 8 */ + interrupts = ; + + msi-controller@17a40000 { + compatible = "arm,gic-v3-its"; + msi-controller; + #msi-cells = <1>; + reg = <0 0x17a40000 0 0x20000>; + status = "disabled"; + }; + }; + + slimbam: dma-controller@17184000 { + compatible = "qcom,bam-v1.7.0"; + qcom,controlled-remotely; + reg = <0 0x17184000 0 0x2a000>; + num-channels = <31>; + interrupts = ; + #dma-cells = <1>; + qcom,ee = <1>; + qcom,num-ees = <2>; + iommus = <&apps_smmu 0x1806 0x0>; + }; + + timer@17c90000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0x20000000>; + compatible = "arm,armv7-timer-mem"; + reg = <0 0x17c90000 0 0x1000>; + + frame@17ca0000 { + frame-number = <0>; + interrupts = , + ; + reg = <0x17ca0000 0x1000>, + <0x17cb0000 0x1000>; + }; + + frame@17cc0000 { + frame-number = <1>; + interrupts = ; + reg = <0x17cc0000 0x1000>; + status = "disabled"; + }; + + frame@17cd0000 { + frame-number = <2>; + interrupts = ; + reg = <0x17cd0000 0x1000>; + status = "disabled"; + }; + + frame@17ce0000 { + frame-number = <3>; + interrupts = ; + reg = <0x17ce0000 0x1000>; + status = "disabled"; + }; + + frame@17cf0000 { + frame-number = <4>; + interrupts = ; + reg = <0x17cf0000 0x1000>; + status = "disabled"; + }; + + frame@17d00000 { + frame-number = <5>; + interrupts = ; + reg = <0x17d00000 0x1000>; + status = "disabled"; + }; + + frame@17d10000 { + frame-number = <6>; + interrupts = ; + reg = <0x17d10000 0x1000>; + status = "disabled"; + }; + }; + + osm_l3: interconnect@17d41000 { + compatible = "qcom,sdm845-osm-l3"; + reg = <0 0x17d41000 0 0x1400>; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + + #interconnect-cells = <1>; + }; + + cpufreq_hw: cpufreq@17d43000 { + compatible = "qcom,cpufreq-hw"; + reg = <0 0x17d43000 0 0x1400>, <0 0x17d45800 0 0x1400>; + reg-names = "freq-domain0", "freq-domain1"; + + interrupts-extended = <&lmh_cluster0 0>, <&lmh_cluster1 0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + + #freq-domain-cells = <1>; + }; + + wifi: wifi@18800000 { + compatible = "qcom,wcn3990-wifi"; + status = "disabled"; + reg = <0 0x18800000 0 0x800000>; + reg-names = "membase"; + memory-region = <&wlan_msa_mem>; + clock-names = "cxo_ref_clk_pin"; + clocks = <&rpmhcc RPMH_RF_CLK2>; + interrupts = + , + , + , + , + , + , + , + , + , + , + , + ; + iommus = <&apps_smmu 0x0040 0x1>; + }; + }; + + thermal-zones { + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 1>; + + trips { + cpu0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 2>; + + trips { + cpu1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 3>; + + trips { + cpu2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 4>; + + trips { + cpu3_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu4-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 7>; + + trips { + cpu4_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu5-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 8>; + + trips { + cpu5_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu6-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 9>; + + trips { + cpu6_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu7-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 10>; + + trips { + cpu7_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + aoss0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 0>; + + trips { + aoss0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + cluster0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 5>; + + trips { + cluster0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + cluster0_crit: cluster0_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cluster1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 6>; + + trips { + cluster1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + cluster1_crit: cluster1_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + gpu-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 11>; + + trips { + gpu1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + gpu-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 12>; + + trips { + gpu2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + aoss1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 0>; + + trips { + aoss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + q6-modem-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 1>; + + trips { + q6_modem_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + mem-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 2>; + + trips { + mem_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + wlan-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 3>; + + trips { + wlan_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + q6-hvx-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 4>; + + trips { + q6_hvx_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + camera-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 5>; + + trips { + camera_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 6>; + + trips { + video_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + modem-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 7>; + + trips { + modem_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts new file mode 100644 index 000000000..48a41ace8 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts @@ -0,0 +1,823 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Lenovo Yoga C630 + * + * Copyright (c) 2019, Linaro Ltd. + */ + +/dts-v1/; + +#include +#include +#include +#include +#include +#include "sdm850.dtsi" +#include "pm8998.dtsi" + +/* + * Update following upstream (sdm845.dtsi) reserved + * memory mappings for firmware loading to succeed + * and enable the IPA device. + */ +/delete-node/ &ipa_fw_mem; +/delete-node/ &ipa_gsi_mem; +/delete-node/ &gpu_mem; +/delete-node/ &adsp_mem; +/delete-node/ &wlan_msa_mem; + +/ { + model = "Lenovo Yoga C630"; + compatible = "lenovo,yoga-c630", "qcom,sdm845"; + chassis-type = "convertible"; + + aliases { + hsuart0 = &uart6; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&lid_pin_active>, <&mode_pin_active>; + + switch-lid { + gpios = <&tlmm 124 GPIO_ACTIVE_HIGH>; + linux,input-type = ; + linux,code = ; + wakeup-source; + wakeup-event-action = ; + }; + + switch-mode { + gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>; + linux,input-type = ; + linux,code = ; + }; + }; + + /* Reserved memory changes for IPA */ + reserved-memory { + wlan_msa_mem: memory@8c400000 { + reg = <0 0x8c400000 0 0x100000>; + no-map; + }; + + gpu_mem: memory@8c515000 { + reg = <0 0x8c515000 0 0x2000>; + no-map; + }; + + ipa_fw_mem: memory@8c517000 { + reg = <0 0x8c517000 0 0x5a000>; + no-map; + }; + + adsp_mem: memory@8c600000 { + reg = <0 0x8c600000 0 0x1a00000>; + no-map; + }; + }; + + sn65dsi86_refclk: sn65dsi86-refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + + clock-frequency = <19200000>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&sn65dsi86 1000000>; + enable-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>; + }; +}; + +&adsp_pas { + firmware-name = "qcom/LENOVO/81JL/qcadsp850.mbn"; + status = "okay"; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8998-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; + + vreg_s2a_1p125: smps2 { + }; + + vreg_s3a_1p35: smps3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + regulator-initial-mode = ; + }; + + vreg_s4a_1p8: smps4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_s5a_2p04: smps5 { + regulator-min-microvolt = <2040000>; + regulator-max-microvolt = <2040000>; + regulator-initial-mode = ; + }; + + vreg_s7a_1p025: smps7 { + }; + + vdd_qusb_hs0: + vdda_hp_pcie_core: + vdda_mipi_csi0_0p9: + vdda_mipi_csi1_0p9: + vdda_mipi_csi2_0p9: + vdda_mipi_dsi0_pll: + vdda_mipi_dsi1_pll: + vdda_qlink_lv: + vdda_qlink_lv_ck: + vdda_qrefs_0p875: + vdda_pcie_core: + vdda_pll_cc_ebi01: + vdda_pll_cc_ebi23: + vdda_sp_sensor: + vdda_ufs1_core: + vdda_ufs2_core: + vdda_usb1_ss_core: + vdda_usb2_ss_core: + vreg_l1a_0p875: ldo1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + }; + + vddpx_10: + vreg_l2a_1p2: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + regulator-always-on; + }; + + vreg_l3a_1p0: ldo3 { + }; + + vdd_wcss_cx: + vdd_wcss_mx: + vdda_wcss_pll: + vreg_l5a_0p8: ldo5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = ; + }; + + vddpx_13: + vreg_l6a_1p8: ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l8a_1p2: ldo8 { + }; + + vreg_l9a_1p8: ldo9 { + }; + + vreg_l10a_1p8: ldo10 { + }; + + vreg_l11a_1p0: ldo11 { + }; + + vdd_qfprom: + vdd_qfprom_sp: + vdda_apc1_cs_1p8: + vdda_gfx_cs_1p8: + vdda_qrefs_1p8: + vdda_qusb_hs0_1p8: + vddpx_11: + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vddpx_2: + vreg_l13a_2p95: ldo13 { + }; + + vreg_l14a_1p88: ldo14 { + regulator-min-microvolt = <1880000>; + regulator-max-microvolt = <1880000>; + regulator-initial-mode = ; + regulator-always-on; + }; + + vreg_l15a_1p8: ldo15 { + }; + + vreg_l16a_2p7: ldo16 { + }; + + vreg_l17a_1p3: ldo17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = ; + }; + + vreg_l18a_2p7: ldo18 { + }; + + vreg_l19a_3p0: ldo19 { + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3108000>; + regulator-initial-mode = ; + }; + + vreg_l20a_2p95: ldo20 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l21a_2p95: ldo21 { + }; + + vreg_l22a_2p85: ldo22 { + }; + + vreg_l23a_3p3: ldo23 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + }; + + vdda_qusb_hs0_3p1: + vreg_l24a_3p075: ldo24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3083000>; + regulator-initial-mode = ; + }; + + vreg_l25a_3p3: ldo25 { + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3112000>; + regulator-initial-mode = ; + }; + + vdda_hp_pcie_1p2: + vdda_hv_ebi0: + vdda_hv_ebi1: + vdda_hv_ebi2: + vdda_hv_ebi3: + vdda_mipi_csi_1p25: + vdda_mipi_dsi0_1p2: + vdda_mipi_dsi1_1p2: + vdda_pcie_1p2: + vdda_ufs1_1p2: + vdda_ufs2_1p2: + vdda_usb1_ss_1p2: + vdda_usb2_ss_1p2: + vreg_l26a_1p2: ldo26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1208000>; + regulator-initial-mode = ; + }; + + vreg_l28a_3p0: ldo28 { + }; + + vreg_lvs1a_1p8: lvs1 { + }; + + vreg_lvs2a_1p8: lvs2 { + }; + }; +}; + +&cdsp_pas { + firmware-name = "qcom/LENOVO/81JL/qccdsp850.mbn"; + status = "okay"; +}; + +&dsi0 { + status = "okay"; + vdda-supply = <&vreg_l26a_1p2>; + + ports { + port@1 { + endpoint { + remote-endpoint = <&sn65dsi86_in_a>; + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&dsi0_phy { + status = "okay"; + vdds-supply = <&vreg_l1a_0p875>; +}; + +&gcc { + protected-clocks = , + , + , + , + ; +}; + +&gmu { + status = "okay"; +}; + +&gpu { + status = "okay"; + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/LENOVO/81JL/qcdxkmsuc850.mbn"; + }; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; +}; + +&i2c3 { + status = "okay"; + clock-frequency = <400000>; + /* Overwrite pinctrl-0 from sdm845.dtsi */ + pinctrl-0 = <&qup_i2c3_default &i2c3_hid_active>; + + tsel: hid@15 { + compatible = "hid-over-i2c"; + reg = <0x15>; + hid-descr-addr = <0x1>; + + interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_HIGH>; + }; + + tsc2: hid@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + hid-descr-addr = <0x20>; + + interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&i2c5 { + status = "okay"; + clock-frequency = <400000>; + + tsc1: hid@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + hid-descr-addr = <0x1>; + + interrupts-extended = <&tlmm 125 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_hid_active>; + }; +}; + +&i2c10 { + status = "okay"; + clock-frequency = <400000>; + + sn65dsi86: bridge@2c { + compatible = "ti,sn65dsi86"; + reg = <0x2c>; + pinctrl-names = "default"; + pinctrl-0 = <&sn65dsi86_pin_active>; + + enable-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + + vpll-supply = <&vreg_l14a_1p88>; + vccio-supply = <&vreg_l14a_1p88>; + + clocks = <&sn65dsi86_refclk>; + clock-names = "refclk"; + + no-hpd; + #pwm-cells = <1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + sn65dsi86_in_a: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + sn65dsi86_out: endpoint { + remote-endpoint = <&panel_in_edp>; + }; + }; + }; + + aux-bus { + panel: panel { + compatible = "boe,nv133fhm-n61"; + backlight = <&backlight>; + + port { + panel_in_edp: endpoint { + remote-endpoint = <&sn65dsi86_out>; + }; + }; + }; + }; + }; +}; + +&i2c11 { + status = "okay"; + clock-frequency = <400000>; + + ecsh: hid@5c { + compatible = "hid-over-i2c"; + reg = <0x5c>; + hid-descr-addr = <0x1>; + + interrupts-extended = <&tlmm 92 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c11_hid_active>; + }; +}; + +&ipa { + status = "okay"; + memory-region = <&ipa_fw_mem>; +}; + +&mdss { + status = "okay"; +}; + +&mss_pil { + status = "okay"; + firmware-name = "qcom/LENOVO/81JL/qcdsp1v2850.mbn", "qcom/LENOVO/81JL/qcdsp2850.mbn"; +}; + +&qup_i2c10_default { + pinconf { + pins = "gpio55", "gpio56"; + drive-strength = <2>; + bias-disable; + }; +}; + +&qup_i2c12_default { + pinmux { + drive-strength = <2>; + bias-disable; + }; +}; + +&qup_uart6_default { + pinmux { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + function = "qup6"; + }; + + cts { + pins = "gpio45"; + bias-pull-down; + }; + + rts-tx { + pins = "gpio46", "gpio47"; + drive-strength = <2>; + bias-disable; + }; + + rx { + pins = "gpio48"; + bias-pull-up; + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&q6asmdai { + dai@0 { + reg = <0>; + }; + + dai@1 { + reg = <1>; + }; + + dai@2 { + reg = <2>; + }; +}; + +&sound { + compatible = "qcom,db845c-sndcard"; + model = "Lenovo-YOGA-C630-13Q50"; + + audio-routing = + "RX_BIAS", "MCLK", + "AMIC2", "MIC BIAS2", + "SpkrLeft IN", "SPK1 OUT", + "SpkrRight IN", "SPK2 OUT", + "MM_DL1", "MultiMedia1 Playback", + "MM_DL3", "MultiMedia3 Playback", + "MultiMedia2 Capture", "MM_UL2"; + + mm1-dai-link { + link-name = "MultiMedia1"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + mm2-dai-link { + link-name = "MultiMedia2"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + mm3-dai-link { + link-name = "MultiMedia3"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + slim-dai-link { + link-name = "SLIM Playback"; + cpu { + sound-dai = <&q6afedai SLIMBUS_0_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>; + }; + }; + + slimcap-dai-link { + link-name = "SLIM Capture"; + cpu { + sound-dai = <&q6afedai SLIMBUS_0_TX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9340 1>; + }; + }; + + slim-wcd-dai-link { + link-name = "SLIM WCD Playback"; + cpu { + sound-dai = <&q6afedai SLIMBUS_1_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9340 2>; + }; + }; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <81 4>; + + sn65dsi86_pin_active: sn65dsi86-enable { + pins = "gpio96"; + drive-strength = <2>; + bias-disable; + }; + + i2c3_hid_active: i2c2-hid-active { + pins = "gpio37"; + function = "gpio"; + + input-enable; + bias-pull-up; + drive-strength = <2>; + }; + + i2c5_hid_active: i2c5-hid-active { + pins = "gpio125"; + function = "gpio"; + + input-enable; + bias-pull-up; + drive-strength = <2>; + }; + + i2c11_hid_active: i2c11-hid-active { + pins = "gpio92"; + function = "gpio"; + + input-enable; + bias-pull-up; + drive-strength = <2>; + }; + + wcd_intr_default: wcd_intr_default { + pins = "gpio54"; + function = "gpio"; + + input-enable; + bias-pull-down; + drive-strength = <2>; + }; + + lid_pin_active: lid-pin { + pins = "gpio124"; + function = "gpio"; + + input-enable; + bias-disable; + }; + + mode_pin_active: mode-pin { + pins = "gpio95"; + function = "gpio"; + + input-enable; + bias-disable; + }; +}; + +&uart6 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + vddch1-supply = <&vreg_l23a_3p3>; + max-speed = <3200000>; + }; +}; + +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l20a_2p95>; + vcc-max-microamp = <600000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vdda_ufs1_core>; + vdda-pll-supply = <&vdda_ufs1_1p2>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdd-supply = <&vdda_usb1_ss_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = ; + qcom,preemphasis-level = ; + qcom,preemphasis-width = ; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vdda_usb1_ss_1p2>; + vdda-pll-supply = <&vdda_usb1_ss_core>; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; +}; + +&usb_2_hsphy { + status = "okay"; + + vdd-supply = <&vdda_usb2_ss_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = ; +}; + +&usb_2_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vdda_usb2_ss_1p2>; + vdda-pll-supply = <&vdda_usb2_ss_core>; +}; + +&venus { + status = "okay"; +}; + +&wcd9340{ + pinctrl-0 = <&wcd_intr_default>; + pinctrl-names = "default"; + clock-names = "extclk"; + clocks = <&rpmhcc RPMH_LN_BB_CLK2>; + reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-buck-sido-supply = <&vreg_s4a_1p8>; + vdd-tx-supply = <&vreg_s4a_1p8>; + vdd-rx-supply = <&vreg_s4a_1p8>; + vdd-io-supply = <&vreg_s4a_1p8>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + + swm: swm@c85 { + left_spkr: wsa8810-left{ + compatible = "sdw10217211000"; + reg = <0 3>; + powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>; + #thermal-sensor-cells = <0>; + sound-name-prefix = "SpkrLeft"; + #sound-dai-cells = <0>; + }; + + right_spkr: wsa8810-right{ + compatible = "sdw10217211000"; + powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>; + reg = <0 4>; + #thermal-sensor-cells = <0>; + sound-name-prefix = "SpkrRight"; + #sound-dai-cells = <0>; + }; + }; +}; + +&wifi { + status = "okay"; + + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; + vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; + + qcom,snoc-host-cap-8bit-quirk; +}; + +&crypto { + /* FIXME: qce_start triggers an SError */ + status = "disable"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts new file mode 100644 index 000000000..c169d2870 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts @@ -0,0 +1,750 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Samsung Galaxy Book2 + * + * Copyright (c) 2022, Xilin Wu + */ + +/dts-v1/; + +#include +#include +#include +#include +#include +#include +#include "sdm850.dtsi" +#include "pm8998.dtsi" + +/* + * Update following upstream (sdm845.dtsi) reserved + * memory mappings for firmware loading to succeed + */ +/delete-node/ &qseecom_mem; +/delete-node/ &wlan_msa_mem; +/delete-node/ &slpi_mem; +/delete-node/ &ipa_fw_mem; +/delete-node/ &ipa_gsi_mem; +/delete-node/ &gpu_mem; +/delete-node/ &mpss_region; +/delete-node/ &adsp_mem; +/delete-node/ &cdsp_mem; +/delete-node/ &venus_mem; +/delete-node/ &mba_region; +/delete-node/ &spss_mem; + +/ { + model = "Samsung Galaxy Book2"; + compatible = "samsung,w737", "qcom,sdm845"; + chassis-type = "convertible"; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + // Firmware initialized the display at 1280p instead of 1440p + framebuffer0: framebuffer@80400000 { + compatible = "simple-framebuffer"; + reg = <0 0x80400000 0 (1920 * 1280 * 4)>; + width = <1920>; + height = <1280>; + stride = <(1920 * 4)>; + format = "a8r8g8b8"; + }; + }; + + aliases { + hsuart0 = &uart6; + }; + + /* Reserved memory changes */ + reserved-memory { + /* Bootloader display framebuffer region */ + cont_splash_mem: memory@80400000 { + reg = <0x0 0x80400000 0x0 0x960000>; + no-map; + }; + + qseecom_mem: memory@8b500000 { + reg = <0 0x8b500000 0 0xa00000>; + no-map; + }; + + wlan_msa_mem: memory@8c400000 { + reg = <0 0x8c400000 0 0x100000>; + no-map; + }; + + slpi_mem: memory@8c500000 { + reg = <0 0x8c500000 0 0x1200000>; + no-map; + }; + + ipa_fw_mem: memory@8d700000 { + reg = <0 0x8d700000 0 0x100000>; + no-map; + }; + + gpu_mem: memory@8d800000 { + reg = <0 0x8d800000 0 0x5000>; + no-map; + }; + + mpss_region: memory@8e000000 { + reg = <0 0x8e000000 0 0x8000000>; + no-map; + }; + + adsp_mem: memory@96000000 { + reg = <0 0x96000000 0 0x2000000>; + no-map; + }; + + cdsp_mem: memory@98000000 { + reg = <0 0x98000000 0 0x800000>; + no-map; + }; + + venus_mem: memory@98800000 { + reg = <0 0x98800000 0 0x500000>; + no-map; + }; + + mba_region: memory@98d00000 { + reg = <0 0x98d00000 0 0x200000>; + no-map; + }; + + spss_mem: memory@98f00000 { + reg = <0 0x98f00000 0 0x100000>; + no-map; + }; + }; +}; + +&adsp_pas { + firmware-name = "qcom/samsung/w737/qcadsp850.mbn"; + status = "okay"; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8998-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; + + vreg_s2a_1p125: smps2 { + }; + + vreg_s3a_1p35: smps3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + regulator-initial-mode = ; + }; + + vreg_s4a_1p8: smps4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_s5a_2p04: smps5 { + regulator-min-microvolt = <2040000>; + regulator-max-microvolt = <2040000>; + regulator-initial-mode = ; + }; + + vreg_s7a_1p025: smps7 { + }; + + vdd_qusb_hs0: + vdda_hp_pcie_core: + vdda_mipi_csi0_0p9: + vdda_mipi_csi1_0p9: + vdda_mipi_csi2_0p9: + vdda_mipi_dsi0_pll: + vdda_mipi_dsi1_pll: + vdda_qlink_lv: + vdda_qlink_lv_ck: + vdda_qrefs_0p875: + vdda_pcie_core: + vdda_pll_cc_ebi01: + vdda_pll_cc_ebi23: + vdda_sp_sensor: + vdda_ufs1_core: + vdda_ufs2_core: + vdda_usb1_ss_core: + vdda_usb2_ss_core: + vreg_l1a_0p875: ldo1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + }; + + vddpx_10: + vreg_l2a_1p2: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + regulator-always-on; + }; + + vreg_l3a_1p0: ldo3 { + }; + + vdd_wcss_cx: + vdd_wcss_mx: + vdda_wcss_pll: + vreg_l5a_0p8: ldo5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = ; + }; + + vddpx_13: + vreg_l6a_1p8: ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l8a_1p2: ldo8 { + }; + + vreg_l9a_1p8: ldo9 { + }; + + vreg_l10a_1p8: ldo10 { + }; + + vreg_l11a_1p0: ldo11 { + }; + + vdd_qfprom: + vdd_qfprom_sp: + vdda_apc1_cs_1p8: + vdda_gfx_cs_1p8: + vdda_qrefs_1p8: + vdda_qusb_hs0_1p8: + vddpx_11: + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vddpx_2: + vreg_l13a_2p95: ldo13 { + }; + + vreg_l14a_1p88: ldo14 { + regulator-min-microvolt = <1880000>; + regulator-max-microvolt = <1880000>; + regulator-initial-mode = ; + regulator-always-on; + }; + + vreg_l15a_1p8: ldo15 { + }; + + vreg_l16a_2p7: ldo16 { + }; + + vreg_l17a_1p3: ldo17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = ; + }; + + vreg_l18a_1p8: ldo18 { + }; + + vreg_l19a_3p0: ldo19 { + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3108000>; + regulator-initial-mode = ; + }; + + vreg_l20a_2p95: ldo20 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l21a_2p95: ldo21 { + }; + + vreg_l22a_2p85: ldo22 { + }; + + vreg_l23a_3p3: ldo23 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + }; + + vdda_qusb_hs0_3p1: + vreg_l24a_3p075: ldo24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3083000>; + regulator-initial-mode = ; + }; + + vreg_l25a_3p3: ldo25 { + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3112000>; + regulator-initial-mode = ; + }; + + vdda_hp_pcie_1p2: + vdda_hv_ebi0: + vdda_hv_ebi1: + vdda_hv_ebi2: + vdda_hv_ebi3: + vdda_mipi_csi_1p25: + vdda_mipi_dsi0_1p2: + vdda_mipi_dsi1_1p2: + vdda_pcie_1p2: + vdda_ufs1_1p2: + vdda_ufs2_1p2: + vdda_usb1_ss_1p2: + vdda_usb2_ss_1p2: + vreg_l26a_1p2: ldo26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1208000>; + regulator-initial-mode = ; + }; + + vreg_l28a_3p0: ldo28 { + }; + + vreg_lvs1a_1p8: lvs1 { + }; + + vreg_lvs2a_1p8: lvs2 { + }; + }; +}; + +&cdsp_pas { + firmware-name = "qcom/samsung/w737/qccdsp850.mbn"; + status = "okay"; +}; + +&gcc { + protected-clocks = , + , + , + , + ; +}; + +&i2c10 { + status = "okay"; + clock-frequency = <400000>; + + /* SN65DSI86 @ 0x2c */ + /* The panel requires dual DSI, which is not supported by the bridge driver */ +}; + +&i2c11 { + status = "okay"; + clock-frequency = <400000>; + + /* HID-I2C Touchscreen @ 0x20 */ +}; + +&i2c15 { + status = "okay"; + clock-frequency = <400000>; + + digitizer@9 { + compatible = "wacom,w9013", "hid-over-i2c"; + reg = <0x9>; + pinctrl-names = "default"; + pinctrl-0 = <&pen_irq_l>, <&pen_pdct_l>, <&pen_rst_l>; + + post-power-on-delay-ms = <120>; + + interrupt-parent = <&tlmm>; + interrupts = <119 IRQ_TYPE_LEVEL_LOW>; + + hid-descr-addr = <0x1>; + }; +}; + +&ipa { + status = "okay"; + memory-region = <&ipa_fw_mem>; + firmware-name = "qcom/samsung/w737/ipa_fws.elf"; +}; + +/* No idea why it causes an SError when enabled */ +&llcc { + status = "disabled"; +}; + +&mss_pil { + status = "okay"; + firmware-name = "qcom/samsung/w737/qcdsp1v2850.mbn", "qcom/samsung/w737/qcdsp2850.mbn"; +}; + +&qup_i2c10_default { + pinconf { + pins = "gpio55", "gpio56"; + drive-strength = <2>; + bias-disable; + }; +}; + +&qup_i2c11_default { + pinconf { + pins = "gpio31", "gpio32"; + drive-strength = <2>; + bias-disable; + }; +}; + +&qup_i2c12_default { + pinmux { + drive-strength = <2>; + bias-disable; + }; +}; + +&qup_uart6_default { + pinmux { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + function = "qup6"; + }; + + cts { + pins = "gpio45"; + bias-pull-down; + }; + + rts-tx { + pins = "gpio46", "gpio47"; + drive-strength = <2>; + bias-disable; + }; + + rx { + pins = "gpio48"; + bias-pull-up; + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&q6asmdai { + dai@0 { + reg = <0>; + }; + + dai@1 { + reg = <1>; + }; + + dai@2 { + reg = <2>; + }; +}; + +&sound { + compatible = "qcom,sdm845-sndcard"; + model = "Samsung-W737"; + + audio-routing = + "RX_BIAS", "MCLK", + "AMIC2", "MIC BIAS2", + "SpkrLeft IN", "SPK1 OUT", + "SpkrRight IN", "SPK2 OUT", + "MM_DL1", "MultiMedia1 Playback", + "MM_DL3", "MultiMedia3 Playback", + "MultiMedia2 Capture", "MM_UL2"; + + mm1-dai-link { + link-name = "MultiMedia1"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + mm2-dai-link { + link-name = "MultiMedia2"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + mm3-dai-link { + link-name = "MultiMedia3"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + slim-dai-link { + link-name = "SLIM Playback"; + cpu { + sound-dai = <&q6afedai SLIMBUS_0_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>; + }; + }; + + slimcap-dai-link { + link-name = "SLIM Capture"; + cpu { + sound-dai = <&q6afedai SLIMBUS_0_TX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9340 1>; + }; + }; + + slim-wcd-dai-link { + link-name = "SLIM WCD Playback"; + cpu { + sound-dai = <&q6afedai SLIMBUS_1_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9340 2>; + }; + }; +}; + +&tlmm { + gpio-reserved-ranges = <0 6>, <85 4>; + + pen_irq_l: pen-irq-l { + pinmux { + pins = "gpio119"; + function = "gpio"; + }; + + pinconf { + pins = "gpio119"; + bias-disable; + }; + }; + + pen_pdct_l: pen-pdct-l { + pinmux { + pins = "gpio124"; + function = "gpio"; + }; + + pinconf { + pins = "gpio124"; + bias-disable; + drive-strength = <2>; + output-high; + }; + }; + + pen_rst_l: pen-rst-l { + pinmux { + pins = "gpio21"; + function = "gpio"; + }; + + pinconf { + pins = "gpio21"; + bias-disable; + drive-strength = <2>; + + /* + * The pen driver doesn't currently support + * driving this reset line. By specifying + * output-high here we're relying on the fact + * that this pin has a default pulldown at boot + * (which makes sure the pen was in reset if it + * was powered) and then we set it high here to + * take it out of reset. Better would be if the + * pen driver could control this and we could + * remove "output-high" here. + */ + output-high; + }; + }; + + wcd_intr_default: wcd_intr_default { + pins = "gpio54"; + function = "gpio"; + + input-enable; + bias-pull-down; + drive-strength = <2>; + }; +}; + +&uart6 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + vddch1-supply = <&vreg_l23a_3p3>; + max-speed = <3200000>; + }; +}; + +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l20a_2p95>; + vcc-max-microamp = <600000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vdda_ufs1_core>; + vdda-pll-supply = <&vdda_ufs1_1p2>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdd-supply = <&vdda_usb1_ss_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = ; + qcom,preemphasis-level = ; + qcom,preemphasis-width = ; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vdda_usb1_ss_1p2>; + vdda-pll-supply = <&vdda_usb1_ss_core>; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; +}; + +&usb_2_hsphy { + status = "okay"; + + vdd-supply = <&vdda_usb2_ss_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = ; +}; + +&usb_2_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vdda_usb2_ss_1p2>; + vdda-pll-supply = <&vdda_usb2_ss_core>; +}; + +&venus { + status = "okay"; + firmware-name = "qcom/samsung/w737/qcvss850.mbn"; +}; + +&wcd9340{ + pinctrl-0 = <&wcd_intr_default>; + pinctrl-names = "default"; + clock-names = "extclk"; + clocks = <&rpmhcc RPMH_LN_BB_CLK2>; + reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-buck-sido-supply = <&vreg_s4a_1p8>; + vdd-tx-supply = <&vreg_s4a_1p8>; + vdd-rx-supply = <&vreg_s4a_1p8>; + vdd-io-supply = <&vreg_s4a_1p8>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + + swm: swm@c85 { + left_spkr: wsa8810-left{ + compatible = "sdw10217211000"; + reg = <0 3>; + powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>; + #thermal-sensor-cells = <0>; + sound-name-prefix = "SpkrLeft"; + #sound-dai-cells = <0>; + }; + + right_spkr: wsa8810-right{ + compatible = "sdw10217211000"; + powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>; + reg = <0 4>; + #thermal-sensor-cells = <0>; + sound-name-prefix = "SpkrRight"; + #sound-dai-cells = <0>; + }; + }; +}; + +&wifi { + status = "okay"; + + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; + vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; + + qcom,snoc-host-cap-8bit-quirk; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm850.dtsi b/arch/arm64/boot/dts/qcom/sdm850.dtsi new file mode 100644 index 000000000..da9f6fbe3 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm850.dtsi @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SDM850 SoC device tree source + * + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +#include "sdm845.dtsi" + +&cpu4_opp_table { + cpu4_opp33: opp-2841600000 { + opp-hz = /bits/ 64 <2841600000>; + opp-peak-kBps = <7216000 25497600>; + }; + + cpu4_opp34: opp-2956800000 { + opp-hz = /bits/ 64 <2956800000>; + opp-peak-kBps = <7216000 25497600>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts new file mode 100644 index 000000000..4a77b650c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts @@ -0,0 +1,128 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Martin Botka + */ + +/dts-v1/; + +#include "sm6125.dtsi" +#include +#include +#include + +/ { + /* required for bootloader to select correct board */ + qcom,msm-id = <394 0x10000>; /* sm6125 v1 */ + qcom,board-id = <34 0>; + + model = "Sony Xperia 10 II"; + compatible = "sony,pdx201", "qcom,sm6125"; + chassis-type = "handset"; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer0: framebuffer@5c000000 { + compatible = "simple-framebuffer"; + reg = <0 0x5c000000 0 (2520 * 1080 * 4)>; + width = <1080>; + height = <2520>; + stride = <(1080 * 4)>; + format = "a8r8g8b8"; + }; + }; + + extcon_usb: extcon-usb { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&vol_down_n>; + pinctrl-names = "default"; + + key-volume-down { + label = "Volume Down"; + gpios = <&tlmm 47 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + + reserved_memory { + #address-cells = <2>; + #size-cells = <2>; + debug_mem: memory@ffb00000 { + reg = <0x0 0xffb00000 0x0 0xc0000>; + no-map; + }; + + last_log_mem: memory@ffbc0000 { + reg = <0x0 0xffbc0000 0x0 0x80000>; + no-map; + }; + + pstore_mem: ramoops@ffc00000 { + compatible = "ramoops"; + reg = <0x0 0xffc40000 0x0 0xc0000>; + record-size = <0x1000>; + console-size = <0x40000>; + pmsg-size = <0x20000>; + }; + + cmdline_mem: memory@ffd00000 { + reg = <0x0 0xffd40000 0x0 0x1000>; + no-map; + }; + }; +}; + +&hsusb_phy1 { + status = "okay"; +}; + +&sdc2_off_state { + sd-cd-pins { + pins = "gpio98"; + drive-strength = <2>; + bias-disable; + }; +}; + +&sdc2_on_state { + sd-cd-pins { + pins = "gpio98"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +&sdhc_1 { + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <22 2>, <28 6>; + + vol_down_n: vol-down-n-state { + pins = "gpio47"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + input-enable; + }; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + extcon = <&extcon_usb>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi new file mode 100644 index 000000000..271247b37 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi @@ -0,0 +1,658 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Martin Botka + */ + +#include +#include +#include +#include +#include + +/ { + interrupt-parent = <&intc>; + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + clock-output-names = "xo_board"; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32000>; + clock-output-names = "sleep_clk"; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x0>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + compatible = "cache"; + }; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x1>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_0>; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x2>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_0>; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x3>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_0>; + }; + + CPU4: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x100>; + enable-method = "psci"; + capacity-dmips-mhz = <1638>; + next-level-cache = <&L2_1>; + L2_1: l2-cache { + compatible = "cache"; + }; + }; + + CPU5: cpu@101 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x101>; + enable-method = "psci"; + capacity-dmips-mhz = <1638>; + next-level-cache = <&L2_1>; + }; + + CPU6: cpu@102 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x102>; + enable-method = "psci"; + capacity-dmips-mhz = <1638>; + next-level-cache = <&L2_1>; + }; + + CPU7: cpu@103 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x103>; + enable-method = "psci"; + capacity-dmips-mhz = <1638>; + next-level-cache = <&L2_1>; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + }; + + cluster1 { + core0 { + cpu = <&CPU4>; + }; + + core1 { + cpu = <&CPU5>; + }; + + core2 { + cpu = <&CPU6>; + }; + + core3 { + cpu = <&CPU7>; + }; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-sm6125", "qcom,scm"; + #reset-cells = <1>; + }; + }; + + memory@40000000 { + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x40000000 0x0 0x0>; + device_type = "memory"; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = ; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: memory@45700000 { + reg = <0x0 0x45700000 0x0 0x600000>; + no-map; + }; + + xbl_aop_mem: memory@45e00000 { + reg = <0x0 0x45e00000 0x0 0x140000>; + no-map; + }; + + sec_apps_mem: memory@45fff000 { + reg = <0x0 0x45fff000 0x0 0x1000>; + no-map; + }; + + smem_mem: memory@46000000 { + reg = <0x0 0x46000000 0x0 0x200000>; + no-map; + }; + + reserved_mem1: memory@46200000 { + reg = <0x0 0x46200000 0x0 0x2d00000>; + no-map; + }; + + camera_mem: memory@4ab00000 { + reg = <0x0 0x4ab00000 0x0 0x500000>; + no-map; + }; + + modem_mem: memory@4b000000 { + reg = <0x0 0x4b000000 0x0 0x7e00000>; + no-map; + }; + + venus_mem: memory@52e00000 { + reg = <0x0 0x52e00000 0x0 0x500000>; + no-map; + }; + + wlan_msa_mem: memory@53300000 { + reg = <0x0 0x53300000 0x0 0x200000>; + no-map; + }; + + cdsp_mem: memory@53500000 { + reg = <0x0 0x53500000 0x0 0x1e00000>; + no-map; + }; + + adsp_pil_mem: memory@55300000 { + reg = <0x0 0x55300000 0x0 0x1e00000>; + no-map; + }; + + ipa_fw_mem: memory@57100000 { + reg = <0x0 0x57100000 0x0 0x10000>; + no-map; + }; + + ipa_gsi_mem: memory@57110000 { + reg = <0x0 0x57110000 0x0 0x5000>; + no-map; + }; + + gpu_mem: memory@57115000 { + reg = <0x0 0x57115000 0x0 0x2000>; + no-map; + }; + + cont_splash_mem: memory@5c000000 { + reg = <0x0 0x5c000000 0x0 0x00f00000>; + no-map; + }; + + dfps_data_mem: memory@5cf00000 { + reg = <0x0 0x5cf00000 0x0 0x0100000>; + no-map; + }; + + cdsp_sec_mem: memory@5f800000 { + reg = <0x0 0x5f800000 0x0 0x1e00000>; + no-map; + }; + + qseecom_mem: memory@5e400000 { + reg = <0x0 0x5e400000 0x0 0x1400000>; + no-map; + }; + + sdsp_mem: memory@f3000000 { + reg = <0x0 0xf3000000 0x0 0x400000>; + no-map; + }; + + adsp_mem: memory@f3400000 { + reg = <0x0 0xf3400000 0x0 0x800000>; + no-map; + }; + + qseecom_ta_mem: memory@13fc00000 { + reg = <0x1 0x3fc00000 0x0 0x400000>; + no-map; + }; + }; + + rpm-glink { + compatible = "qcom,glink-rpm"; + + interrupts = ; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + mboxes = <&apcs_glb 0>; + + rpm_requests: rpm-requests { + compatible = "qcom,rpm-sm6125"; + qcom,glink-channels = "rpm_requests"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-sm6125", "qcom,rpmcc"; + #clock-cells = <1>; + }; + + rpmpd: power-controller { + compatible = "qcom,sm6125-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp_ret: opp1 { + opp-level = ; + }; + + rpmpd_opp_ret_plus: opp2 { + opp-level = ; + }; + + rpmpd_opp_min_svs: opp3 { + opp-level = ; + }; + + rpmpd_opp_low_svs: opp4 { + opp-level = ; + }; + + rpmpd_opp_svs: opp5 { + opp-level = ; + }; + + rpmpd_opp_svs_plus: opp6 { + opp-level = ; + }; + + rpmpd_opp_nom: opp7 { + opp-level = ; + }; + + rpmpd_opp_nom_plus: opp8 { + opp-level = ; + }; + + rpmpd_opp_turbo: opp9 { + opp-level = ; + }; + + rpmpd_opp_turbo_no_cpr: opp10 { + opp-level = ; + }; + }; + }; + }; + }; + + smem: smem { + compatible = "qcom,smem"; + memory-region = <&smem_mem>; + hwlocks = <&tcsr_mutex 3>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00 0x00 0x00 0xffffffff>; + compatible = "simple-bus"; + + tcsr_mutex: hwlock@340000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x00340000 0x20000>; + #hwlock-cells = <1>; + }; + + tlmm: pinctrl@500000 { + compatible = "qcom,sm6125-tlmm"; + reg = <0x00500000 0x400000>, + <0x00900000 0x400000>, + <0x00d00000 0x400000>; + reg-names = "west", "south", "east"; + interrupts = ; + gpio-controller; + gpio-ranges = <&tlmm 0 0 134>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + sdc2_off_state: sdc2-off-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + sdc2_on_state: sdc2-on-state { + clk { + pins = "sdc2_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins-pins { + pins = "sdc2_cmd"; + drive-strength = <10>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + }; + + gcc: clock-controller@1400000 { + compatible = "qcom,gcc-sm6125"; + reg = <0x01400000 0x1f0000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clock-names = "bi_tcxo", "sleep_clk"; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>; + }; + + hsusb_phy1: phy@1613000 { + compatible = "qcom,msm8996-qusb2-phy"; + reg = <0x01613000 0x180>; + #phy-cells = <0>; + + clocks = <&gcc GCC_AHB2PHY_USB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + status = "disabled"; + }; + + rpm_msg_ram: sram@45f0000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0x045f0000 0x7000>; + }; + + sdhc_1: mmc@4744000 { + compatible = "qcom,sm6125-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x04744000 0x1000>, <0x04745000 0x1000>; + reg-names = "hc", "cqhci"; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&xo_board>; + clock-names = "iface", "core", "xo"; + + power-domains = <&rpmpd SM6125_VDDCX>; + + qcom,dll-config = <0x000f642c>; + qcom,ddr-config = <0x80040873>; + + bus-width = <8>; + non-removable; + status = "disabled"; + }; + + sdhc_2: mmc@4784000 { + compatible = "qcom,sm6125-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x04784000 0x1000>; + reg-names = "hc"; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&xo_board>; + clock-names = "iface", "core", "xo"; + + pinctrl-0 = <&sdc2_on_state>; + pinctrl-1 = <&sdc2_off_state>; + pinctrl-names = "default", "sleep"; + + power-domains = <&rpmpd SM6125_VDDCX>; + + qcom,dll-config = <0x0007642c>; + qcom,ddr-config = <0x80040873>; + + bus-width = <4>; + status = "disabled"; + }; + + usb3: usb@4ef8800 { + compatible = "qcom,sm6125-dwc3", "qcom,dwc3"; + reg = <0x04ef8800 0x400>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "xo"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <66666667>; + + power-domains = <&gcc USB30_PRIM_GDSC>; + qcom,select-utmi-as-pipe-clk; + status = "disabled"; + + usb3_dwc3: usb@4e00000 { + compatible = "snps,dwc3"; + reg = <0x04e00000 0xcd00>; + interrupts = ; + phys = <&hsusb_phy1>; + phy-names = "usb2-phy"; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + maximum-speed = "high-speed"; + dr_mode = "peripheral"; + }; + }; + + sram@4690000 { + compatible = "qcom,rpm-stats"; + reg = <0x04690000 0x10000>; + }; + + spmi_bus: spmi@1c40000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x01c40000 0x1100>, + <0x01e00000 0x2000000>, + <0x03e00000 0x100000>, + <0x03f00000 0xa0000>, + <0x01c0a000 0x26000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = ; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + cell-index = <0>; + }; + + apcs_glb: mailbox@f111000 { + compatible = "qcom,sm6125-apcs-hmss-global"; + reg = <0x0f111000 0x1000>; + + #mbox-cells = <1>; + }; + + timer@f120000 { + compatible = "arm,armv7-timer-mem"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + reg = <0x0f120000 0x1000>; + clock-frequency = <19200000>; + + frame@f121000 { + frame-number = <0>; + interrupts = , + ; + reg = <0x0f121000 0x1000>, + <0x0f122000 0x1000>; + }; + + frame@f123000 { + frame-number = <1>; + interrupts = ; + reg = <0x0f123000 0x1000>; + status = "disabled"; + }; + + frame@f124000 { + frame-number = <2>; + interrupts = ; + reg = <0x0f124000 0x1000>; + status = "disabled"; + }; + + frame@f125000 { + frame-number = <3>; + interrupts = ; + reg = <0x0f125000 0x1000>; + status = "disabled"; + }; + + frame@f126000 { + frame-number = <4>; + interrupts = ; + reg = <0x0f126000 0x1000>; + status = "disabled"; + }; + + frame@f127000 { + frame-number = <5>; + interrupts = ; + reg = <0x0f127000 0x1000>; + status = "disabled"; + }; + + frame@f128000 { + frame-number = <6>; + interrupts = ; + reg = <0x0f128000 0x1000>; + status = "disabled"; + }; + }; + + intc: interrupt-controller@f200000 { + compatible = "arm,gic-v3"; + reg = <0x0f200000 0x20000>, + <0x0f300000 0x100000>; + #interrupt-cells = <3>; + interrupt-controller; + interrupts = ; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = ; + clock-frequency = <19200000>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts new file mode 100644 index 000000000..36911b9a5 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts @@ -0,0 +1,58 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio + */ +/dts-v1/; + +#include "sm6350.dtsi" + +/ { + model = "Sony Xperia 10 III"; + compatible = "sony,pdx213", "qcom,sm6350"; + chassis-type = "handset"; + qcom,msm-id = <434 0x10000>, <459 0x10000>; + qcom,board-id = <0x1000B 0>; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer: framebuffer@a0000000 { + compatible = "simple-framebuffer"; + reg = <0 0xa0000000 0 0x2300000>; + width = <1080>; + height = <2520>; + stride = <(1080 * 4)>; + format = "a8r8g8b8"; + clocks = <&gcc GCC_DISP_AXI_CLK>; + }; + }; +}; + +&sdhc_2 { + status = "okay"; + + cd-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>; +}; + +&tlmm { + gpio-reserved-ranges = <13 4>, <45 2>, <56 2>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + maximum-speed = "super-speed"; + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; +}; + +&usb_1_qmpphy { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi new file mode 100644 index 000000000..9da373090 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi @@ -0,0 +1,1645 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio + * Copyright (c) 2022, Luca Weiss + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/ { + interrupt-parent = <&intc>; + #address-cells = <2>; + #size-cells = <2>; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <76800000>; + clock-output-names = "xo_board"; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + clock-frequency = <32764>; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo560"; + reg = <0x0 0x0>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&L2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; + L2_0: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo560"; + reg = <0x0 0x100>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&L2_100>; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; + L2_100: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "qcom,kryo560"; + reg = <0x0 0x200>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&L2_200>; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; + L2_200: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "qcom,kryo560"; + reg = <0x0 0x300>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&L2_300>; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; + L2_300: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "qcom,kryo560"; + reg = <0x0 0x400>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&L2_400>; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; + L2_400: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "qcom,kryo560"; + reg = <0x0 0x500>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&L2_500>; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; + L2_500: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "qcom,kryo560"; + reg = <0x0 0x600>; + enable-method = "psci"; + capacity-dmips-mhz = <1894>; + dynamic-power-coefficient = <703>; + next-level-cache = <&L2_600>; + qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; + L2_600: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "qcom,kryo560"; + reg = <0x0 0x700>; + enable-method = "psci"; + capacity-dmips-mhz = <1894>; + dynamic-power-coefficient = <703>; + next-level-cache = <&L2_700>; + qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; + L2_700: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + + core4 { + cpu = <&CPU4>; + }; + + core5 { + cpu = <&CPU5>; + }; + + core6 { + cpu = <&CPU6>; + }; + + core7 { + cpu = <&CPU7>; + }; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-sm6350", "qcom,scm"; + #reset-cells = <1>; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x80000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = ; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: memory@80000000 { + reg = <0 0x80000000 0 0x600000>; + no-map; + }; + + xbl_aop_mem: memory@80700000 { + reg = <0 0x80700000 0 0x160000>; + no-map; + }; + + cmd_db: memory@80860000 { + compatible = "qcom,cmd-db"; + reg = <0 0x80860000 0 0x20000>; + no-map; + }; + + sec_apps_mem: memory@808ff000 { + reg = <0 0x808ff000 0 0x1000>; + no-map; + }; + + smem_mem: memory@80900000 { + reg = <0 0x80900000 0 0x200000>; + no-map; + }; + + cdsp_sec_mem: memory@80b00000 { + reg = <0 0x80b00000 0 0x1e00000>; + no-map; + }; + + pil_camera_mem: memory@86000000 { + reg = <0 0x86000000 0 0x500000>; + no-map; + }; + + pil_npu_mem: memory@86500000 { + reg = <0 0x86500000 0 0x500000>; + no-map; + }; + + pil_video_mem: memory@86a00000 { + reg = <0 0x86a00000 0 0x500000>; + no-map; + }; + + pil_cdsp_mem: memory@86f00000 { + reg = <0 0x86f00000 0 0x1e00000>; + no-map; + }; + + pil_adsp_mem: memory@88d00000 { + reg = <0 0x88d00000 0 0x2800000>; + no-map; + }; + + wlan_fw_mem: memory@8b500000 { + reg = <0 0x8b500000 0 0x200000>; + no-map; + }; + + pil_ipa_fw_mem: memory@8b700000 { + reg = <0 0x8b700000 0 0x10000>; + no-map; + }; + + pil_ipa_gsi_mem: memory@8b710000 { + reg = <0 0x8b710000 0 0x5400>; + no-map; + }; + + pil_modem_mem: memory@8b800000 { + reg = <0 0x8b800000 0 0xf800000>; + no-map; + }; + + cont_splash_memory: memory@a0000000 { + reg = <0 0xa0000000 0 0x2300000>; + no-map; + }; + + dfps_data_memory: memory@a2300000 { + reg = <0 0xa2300000 0 0x100000>; + no-map; + }; + + removed_region: memory@c0000000 { + reg = <0 0xc0000000 0 0x3900000>; + no-map; + }; + + pil_gpu_mem: memory@f0d00000 { + reg = <0 0xf0d00000 0 0x1000>; + no-map; + }; + + debug_region: memory@ffb00000 { + reg = <0 0xffb00000 0 0xc0000>; + no-map; + }; + + last_log_region: memory@ffbc0000 { + reg = <0 0xffbc0000 0 0x40000>; + no-map; + }; + + ramoops: ramoops@ffc00000 { + compatible = "ramoops"; + reg = <0 0xffc00000 0 0x100000>; + record-size = <0x1000>; + console-size = <0x40000>; + pmsg-size = <0x20000>; + ecc-size = <16>; + no-map; + }; + + cmdline_region: memory@ffd00000 { + reg = <0 0xffd00000 0 0x1000>; + no-map; + }; + }; + + smem { + compatible = "qcom,smem"; + memory-region = <&smem_mem>; + hwlocks = <&tcsr_mutex 3>; + }; + + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + smp2p_adsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_adsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-cdsp { + compatible = "qcom,smp2p"; + qcom,smem = <94>, <432>; + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + smp2p_cdsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_cdsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-mpss { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc@0 { + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + compatible = "simple-bus"; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-sm6350"; + reg = <0 0x00100000 0 0x1f0000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clock-names = "bi_tcxo", + "bi_tcxo_ao", + "sleep_clk"; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>; + }; + + ipcc: mailbox@408000 { + compatible = "qcom,sm6350-ipcc", "qcom,ipcc"; + reg = <0 0x00408000 0 0x1000>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <3>; + #mbox-cells = <2>; + }; + + rng: rng@793000 { + compatible = "qcom,prng-ee"; + reg = <0 0x00793000 0 0x1000>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; + + sdhc_1: mmc@7c4000 { + compatible = "qcom,sm6350-sdhci", "qcom,sdhci-msm-v5"; + reg = <0 0x007c4000 0 0x1000>, + <0 0x007c5000 0 0x1000>, + <0 0x007c8000 0 0x8000>; + reg-names = "hc", "cqhci", "ice"; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + iommus = <&apps_smmu 0x60 0x0>; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "core", "xo"; + qcom,dll-config = <0x000f642c>; + qcom,ddr-config = <0x80040868>; + power-domains = <&rpmhpd SM6350_CX>; + operating-points-v2 = <&sdhc1_opp_table>; + bus-width = <8>; + non-removable; + supports-cqe; + + status = "disabled"; + + sdhc1_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + gpi_dma0: dma-controller@800000 { + compatible = "qcom,sm6350-gpi-dma"; + reg = <0 0x00800000 0 0x60000>; + interrupts = , + , + , + , + , + , + , + , + , + ; + dma-channels = <10>; + dma-channel-mask = <0x1f>; + iommus = <&apps_smmu 0x56 0x0>; + #dma-cells = <3>; + status = "disabled"; + }; + + qupv3_id_0: geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x8c0000 0x0 0x2000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + #address-cells = <2>; + #size-cells = <2>; + iommus = <&apps_smmu 0x43 0x0>; + ranges; + status = "disabled"; + + i2c0: i2c@880000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00880000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c0_default>; + interrupts = ; + dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, + <&gpi_dma0 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &clk_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c2: i2c@888000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00888000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c2_default>; + interrupts = ; + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, + <&gpi_dma0 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &clk_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + }; + + gpi_dma1: dma-controller@900000 { + compatible = "qcom,sm6350-gpi-dma"; + reg = <0 0x00900000 0 0x60000>; + interrupts = , + , + , + , + , + , + , + , + , + ; + dma-channels = <10>; + dma-channel-mask = <0x3f>; + iommus = <&apps_smmu 0x4d6 0x0>; + #dma-cells = <3>; + status = "disabled"; + }; + + qupv3_id_1: geniqup@9c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x9c0000 0x0 0x2000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + #address-cells = <2>; + #size-cells = <2>; + iommus = <&apps_smmu 0x4c3 0x0>; + ranges; + status = "disabled"; + + i2c6: i2c@980000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00980000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c6_default>; + interrupts = ; + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, + <&gpi_dma1 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &clk_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c7: i2c@984000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00984000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c7_default>; + interrupts = ; + dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, + <&gpi_dma1 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &clk_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c8: i2c@988000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00988000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c8_default>; + interrupts = ; + dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, + <&gpi_dma1 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &clk_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + uart9: serial@98c000 { + compatible = "qcom,geni-debug-uart"; + reg = <0 0x98c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart9_default>; + interrupts = ; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c10: i2c@990000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00990000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c10_default>; + interrupts = ; + dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, + <&gpi_dma1 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &clk_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + }; + + config_noc: interconnect@1500000 { + compatible = "qcom,sm6350-config-noc"; + reg = <0 0x01500000 0 0x28000>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect@1620000 { + compatible = "qcom,sm6350-system-noc"; + reg = <0 0x01620000 0 0x17080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + + clk_virt: interconnect-clk-virt { + compatible = "qcom,sm6350-clk-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + }; + + aggre1_noc: interconnect@16e0000 { + compatible = "qcom,sm6350-aggre1-noc"; + reg = <0 0x016e0000 0 0x15080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre2_noc: interconnect@1700000 { + compatible = "qcom,sm6350-aggre2-noc"; + reg = <0 0x01700000 0 0x1f880>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + + compute_noc: interconnect-compute-noc { + compatible = "qcom,sm6350-compute-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + }; + + mmss_noc: interconnect@1740000 { + compatible = "qcom,sm6350-mmss-noc"; + reg = <0 0x01740000 0 0x1c100>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + ufs_mem_hc: ufs@1d84000 { + compatible = "qcom,sm6350-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0 0x01d84000 0 0x3000>, + <0 0x01d90000 0 0x8000>; + reg-names = "std", "ice"; + interrupts = ; + phys = <&ufs_mem_phy_lanes>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + power-domains = <&gcc UFS_PHY_GDSC>; + + iommus = <&apps_smmu 0x80 0x0>; + + clock-names = "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk", + "ice_core_clk"; + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmhcc RPMH_QLINK_CLK>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>, + <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; + freq-table-hz = + <50000000 200000000>, + <0 0>, + <0 0>, + <37500000 150000000>, + <75000000 300000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>; + + status = "disabled"; + }; + + ufs_mem_phy: phy@1d87000 { + compatible = "qcom,sm6350-qmp-ufs-phy"; + reg = <0 0x01d87000 0 0x18c>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clock-names = "ref", + "ref_aux"; + clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + + status = "disabled"; + + ufs_mem_phy_lanes: phy@1d87400 { + reg = <0 0x01d87400 0 0x128>, + <0 0x01d87600 0 0x1fc>, + <0 0x01d87c00 0 0x1dc>, + <0 0x01d87800 0 0x128>, + <0 0x01d87a00 0 0x1fc>; + #phy-cells = <0>; + }; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x01f40000 0x0 0x40000>; + #hwlock-cells = <1>; + }; + + adsp: remoteproc@3000000 { + compatible = "qcom,sm6350-adsp-pas"; + reg = <0 0x03000000 0 0x100>; + + interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SM6350_LCX>, + <&rpmhpd SM6350_LMX>; + power-domain-names = "lcx", "lmx"; + + memory-region = <&pil_adsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "lpass"; + qcom,remote-pid = <2>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "adsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1003 0x0>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1004 0x0>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x1005 0x0>; + qcom,nsessions = <5>; + }; + }; + }; + }; + + mpss: remoteproc@4080000 { + compatible = "qcom,sm6350-mpss-pas"; + reg = <0x0 0x04080000 0x0 0x4040>; + + interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SM6350_CX>, + <&rpmhpd SM6350_MSS>; + power-domain-names = "cx", "mss"; + + memory-region = <&pil_modem_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + label = "modem"; + qcom,remote-pid = <1>; + }; + }; + + cdsp: remoteproc@8300000 { + compatible = "qcom,sm6350-cdsp-pas"; + reg = <0 0x08300000 0 0x10000>; + + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SM6350_CX>, + <&rpmhpd SM6350_MX>; + power-domain-names = "cx", "mx"; + + memory-region = <&pil_cdsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_cdsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "cdsp"; + qcom,remote-pid = <5>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "cdsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x1401 0x20>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x1402 0x20>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1403 0x20>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1404 0x20>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x1405 0x20>; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x1406 0x20>; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x1407 0x20>; + }; + + compute-cb@8 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <8>; + iommus = <&apps_smmu 0x1408 0x20>; + }; + + /* note: secure cb9 in downstream */ + }; + }; + }; + + sdhc_2: mmc@8804000 { + compatible = "qcom,sm6350-sdhci", "qcom,sdhci-msm-v5"; + reg = <0 0x08804000 0 0x1000>; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + iommus = <&apps_smmu 0x560 0x0>; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "core", "xo"; + interconnects = <&aggre2_noc MASTER_SDCC_2 0 &clk_virt SLAVE_EBI_CH0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_SDCC_2 0>; + interconnect-names = "sdhc-ddr", "cpu-sdhc"; + + qcom,dll-config = <0x0007642c>; + qcom,ddr-config = <0x80040868>; + power-domains = <&rpmhpd SM6350_CX>; + operating-points-v2 = <&sdhc2_opp_table>; + bus-width = <4>; + + status = "disabled"; + + sdhc2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + opp-peak-kBps = <790000 131000>; + opp-avg-kBps = <50000 50000>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <3190000 294000>; + opp-avg-kBps = <261438 300000>; + }; + }; + }; + + usb_1_hsphy: phy@88e3000 { + compatible = "qcom,sm6350-qusb2-phy", "qcom,qusb2-v2-phy"; + reg = <0 0x088e3000 0 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&xo_board>, <&rpmhcc RPMH_CXO_CLK>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + }; + + usb_1_qmpphy: phy@88e9000 { + compatible = "qcom,sc7180-qmp-usb3-dp-phy"; + reg = <0 0x088e9000 0 0x200>, + <0 0x088e8000 0 0x40>, + <0 0x088ea000 0 0x200>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&xo_board>, + <&rpmhcc RPMH_QLINK_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "com_aux"; + + resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, + <&gcc GCC_USB3_PHY_PRIM_BCR>; + reset-names = "phy", "common"; + + usb_1_ssphy: usb3-phy@88e9200 { + reg = <0 0x088e9200 0 0x200>, + <0 0x088e9400 0 0x200>, + <0 0x088e9c00 0 0x400>, + <0 0x088e9600 0 0x200>, + <0 0x088e9800 0 0x200>, + <0 0x088e9a00 0 0x100>; + #clock-cells = <0>; + #phy-cells = <0>; + clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_phy_pipe_clk_src"; + }; + + dp_phy: dp-phy@88ea200 { + reg = <0 0x088ea200 0 0x200>, + <0 0x088ea400 0 0x200>, + <0 0x088eaa00 0 0x200>, + <0 0x088ea600 0 0x200>, + <0 0x088ea800 0 0x200>; + #phy-cells = <0>; + #clock-cells = <1>; + }; + }; + + dc_noc: interconnect@9160000 { + compatible = "qcom,sm6350-dc-noc"; + reg = <0 0x09160000 0 0x3200>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system-cache-controller@9200000 { + compatible = "qcom,sm6350-llcc"; + reg = <0 0x09200000 0 0x50000>, <0 0x09600000 0 0x50000>; + reg-names = "llcc_base", "llcc_broadcast_base"; + }; + + gem_noc: interconnect@9680000 { + compatible = "qcom,sm6350-gem-noc"; + reg = <0 0x09680000 0 0x3e200>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + npu_noc: interconnect@9990000 { + compatible = "qcom,sm6350-npu-noc"; + reg = <0 0x09990000 0 0x1600>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + usb_1: usb@a6f8800 { + compatible = "qcom,sm6350-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; + + interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 15 IRQ_TYPE_EDGE_BOTH>, + <&pdc 14 IRQ_TYPE_EDGE_BOTH>; + + interrupt-names = "hs_phy_irq", "ss_phy_irq", + "dm_hs_phy_irq", "dp_hs_phy_irq"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + interconnects = <&aggre2_noc MASTER_USB3 0 &clk_virt SLAVE_EBI_CH0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3 0>; + interconnect-names = "usb-ddr", "apps-usb"; + + usb_1_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xcd00>; + interrupts = ; + iommus = <&apps_smmu 0x540 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,has-lpm-erratum; + snps,hird-threshold = /bits/ 8 <0x10>; + phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,sm6350-pdc", "qcom,pdc"; + reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x64>; + qcom,pdc-ranges = <0 480 94>, <94 609 31>, + <125 63 1>, <126 655 12>, <138 139 15>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + tsens0: thermal-sensor@c263000 { + compatible = "qcom,sm6350-tsens", "qcom,tsens-v2"; + reg = <0 0x0c263000 0 0x1ff>, /* TM */ + <0 0x0c222000 0 0x8>; /* SROT */ + #qcom,sensors = <16>; + interrupts-extended = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 28 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c265000 { + compatible = "qcom,sm6350-tsens", "qcom,tsens-v2"; + reg = <0 0x0c265000 0 0x1ff>, /* TM */ + <0 0x0c223000 0 0x8>; /* SROT */ + #qcom,sensors = <16>; + interrupts-extended = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 29 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + aoss_qmp: power-controller@c300000 { + compatible = "qcom,sm6350-aoss-qmp", "qcom,aoss-qmp"; + reg = <0 0x0c300000 0 0x1000>; + interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; + + #clock-cells = <0>; + }; + + spmi_bus: spmi@c440000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0 0xc440000 0 0x1100>, + <0 0xc600000 0 0x2000000>, + <0 0xe600000 0 0x100000>, + <0 0xe700000 0 0xa0000>, + <0 0xc40a000 0 0x26000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + tlmm: pinctrl@f100000 { + compatible = "qcom,sm6350-tlmm"; + reg = <0 0x0f100000 0 0x300000>; + interrupts = , + , + , + , + , + , + , + , + ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 157>; + + qup_uart9_default: qup-uart9-default-state { + pins = "gpio25", "gpio26"; + function = "qup13_f2"; + drive-strength = <2>; + bias-disable; + }; + + qup_i2c0_default: qup-i2c0-default-state { + pins = "gpio0", "gpio1"; + function = "qup00"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c2_default: qup-i2c2-default-state { + pins = "gpio45", "gpio46"; + function = "qup02"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c6_default: qup-i2c6-default-state { + pins = "gpio13", "gpio14"; + function = "qup10"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c7_default: qup-i2c7-default-state { + pins = "gpio27", "gpio28"; + function = "qup11"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c8_default: qup-i2c8-default-state { + pins = "gpio19", "gpio20"; + function = "qup12"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c10_default: qup-i2c10-default-state { + pins = "gpio4", "gpio5"; + function = "qup14"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,sm6350-smmu-500", "arm,mmu-500"; + reg = <0 0x15000000 0 0x100000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + }; + + intc: interrupt-controller@17a00000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */ + <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */ + interrupts = ; + }; + + watchdog@17c10000 { + compatible = "qcom,apss-wdt-sm6350", "qcom,kpss-wdt"; + reg = <0 0x17c10000 0 0x1000>; + clocks = <&sleep_clk>; + interrupts = ; + }; + + timer@17c20000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0 0x17c20000 0x0 0x1000>; + clock-frequency = <19200000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0x20000000>; + + frame@17c21000 { + frame-number = <0>; + interrupts = , + ; + reg = <0x17c21000 0x1000>, + <0x17c22000 0x1000>; + }; + + frame@17c23000 { + frame-number = <1>; + interrupts = ; + reg = <0x17c23000 0x1000>; + status = "disabled"; + }; + + frame@17c25000 { + frame-number = <2>; + interrupts = ; + reg = <0x17c25000 0x1000>; + status = "disabled"; + }; + + frame@17c27000 { + frame-number = <3>; + interrupts = ; + reg = <0x17c27000 0x1000>; + status = "disabled"; + }; + + frame@17c29000 { + frame-number = <4>; + interrupts = ; + reg = <0x17c29000 0x1000>; + status = "disabled"; + }; + + frame@17c2b000 { + frame-number = <5>; + interrupts = ; + reg = <0x17c2b000 0x1000>; + status = "disabled"; + }; + + frame@17c2d000 { + frame-number = <6>; + interrupts = ; + reg = <0x17c2d000 0x1000>; + status = "disabled"; + }; + }; + + wifi: wifi@18800000 { + compatible = "qcom,wcn3990-wifi"; + reg = <0 0x18800000 0 0x800000>; + reg-names = "membase"; + memory-region = <&wlan_fw_mem>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + ; + iommus = <&apps_smmu 0x20 0x1>; + qcom,msa-fixed-perm; + status = "disabled"; + }; + + apps_rsc: rsc@18200000 { + compatible = "qcom,rpmh-rsc"; + label = "apps_rsc"; + reg = <0x0 0x18200000 0x0 0x10000>, + <0x0 0x18210000 0x0 0x10000>, + <0x0 0x18220000 0x0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = , + , + ; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = , , + , ; + + rpmhcc: clock-controller { + compatible = "qcom,sm6350-rpmh-clk"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board>; + }; + + rpmhpd: power-controller { + compatible = "qcom,sm6350-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = ; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = ; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = ; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = ; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = ; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = ; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = ; + }; + + rpmhpd_opp_nom_l2: opp8 { + opp-level = ; + }; + + rpmhpd_opp_turbo: opp9 { + opp-level = ; + }; + + rpmhpd_opp_turbo_l1: opp10 { + opp-level = ; + }; + }; + }; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + }; + + cpufreq_hw: cpufreq@18323000 { + compatible = "qcom,cpufreq-hw"; + reg = <0 0x18323000 0 0x1000>, <0 0x18325800 0 0x1000>; + reg-names = "freq-domain0", "freq-domain1"; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + + #freq-domain-cells = <1>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + clock-frequency = <19200000>; + interrupts = , + , + , + ; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts new file mode 100644 index 000000000..30c94fd4f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts @@ -0,0 +1,485 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Luca Weiss + */ + +/dts-v1/; + +#include +#include +#include +#include +#include "sm7225.dtsi" +#include "pm6150l.dtsi" +#include "pm6350.dtsi" +#include "pm7250b.dtsi" + +/ { + model = "Fairphone 4"; + compatible = "fairphone,fp4", "qcom,sm7225"; + chassis-type = "handset"; + + /* required for bootloader to select correct board */ + qcom,msm-id = <434 0x10000>, <459 0x10000>; + qcom,board-id = <8 32>; + + aliases { + serial0 = &uart9; + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + stdout-path = "serial0:115200n8"; + + framebuffer0: framebuffer@a000000 { + compatible = "simple-framebuffer"; + reg = <0 0xa0000000 0 (2340 * 1080 * 4)>; + width = <1080>; + height = <2340>; + stride = <(1080 * 4)>; + format = "a8r8g8b8"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pin>; + + key-volume-up { + label = "volume_up"; + linux,code = ; + gpios = <&pm6350_gpios 2 GPIO_ACTIVE_LOW>; + }; + }; + + reserved-memory { + /* + * The rmtfs memory region in downstream is 'dynamically allocated' + * but given the same address every time. Hard code it as this address is + * where the modem firmware expects it to be. + */ + memory@efe01000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0xefe01000 0 0x600000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + }; + + thermal-zones { + chg-skin-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm7250b_adc_tm 0>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + conn-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm7250b_adc_tm 1>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + }; +}; + +&adsp { + status = "okay"; + firmware-name = "qcom/sm7225/fairphone4/adsp.mdt"; +}; + +&apps_rsc { + pm6350-rpmh-regulators { + compatible = "qcom,pm6350-rpmh-regulators"; + qcom,pmic-id = "a"; + + vreg_s1a: smps1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_s2a: smps2 { + regulator-min-microvolt = <1503000>; + regulator-max-microvolt = <2048000>; + }; + + vreg_l2a: ldo2 { + regulator-min-microvolt = <1503000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = ; + }; + + vreg_l3a: ldo3 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = ; + }; + + vreg_l4a: ldo4 { + regulator-min-microvolt = <352000>; + regulator-max-microvolt = <801000>; + regulator-initial-mode = ; + }; + + vreg_l5a: ldo5 { + regulator-min-microvolt = <1503000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = ; + }; + + vreg_l6a: ldo6 { + regulator-min-microvolt = <1710000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = ; + }; + + vreg_l7a: ldo7 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = ; + }; + + vreg_l8a: ldo8 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = ; + }; + + vreg_l9a: ldo9 { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <3401000>; + regulator-initial-mode = ; + }; + + vreg_l11a: ldo11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = ; + }; + + vreg_l12a: ldo12 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = ; + }; + + vreg_l13a: ldo13 { + regulator-min-microvolt = <570000>; + regulator-max-microvolt = <650000>; + regulator-initial-mode = ; + }; + + vreg_l14a: ldo14 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + regulator-initial-mode = ; + }; + + vreg_l15a: ldo15 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1305000>; + regulator-initial-mode = ; + }; + + vreg_l16a: ldo16 { + regulator-min-microvolt = <830000>; + regulator-max-microvolt = <921000>; + regulator-initial-mode = ; + }; + + vreg_l18a: ldo18 { + regulator-min-microvolt = <788000>; + regulator-max-microvolt = <1049000>; + regulator-initial-mode = ; + }; + + vreg_l19a: ldo19 { + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1305000>; + regulator-initial-mode = ; + }; + + vreg_l20a: ldo20 { + regulator-min-microvolt = <530000>; + regulator-max-microvolt = <801000>; + regulator-initial-mode = ; + }; + + vreg_l21a: ldo21 { + regulator-min-microvolt = <751000>; + regulator-max-microvolt = <825000>; + regulator-initial-mode = ; + }; + + vreg_l22a: ldo22 { + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1305000>; + regulator-initial-mode = ; + }; + }; + + pm6150l-rpmh-regulators { + compatible = "qcom,pm6150l-rpmh-regulators"; + qcom,pmic-id = "e"; + + vreg_s8e: smps8 { + regulator-min-microvolt = <313000>; + regulator-max-microvolt = <1395000>; + }; + + vreg_l1e: ldo1 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = ; + }; + + vreg_l2e: ldo2 { + regulator-min-microvolt = <1170000>; + regulator-max-microvolt = <1305000>; + regulator-initial-mode = ; + }; + + vreg_l3e: ldo3 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1299000>; + regulator-initial-mode = ; + }; + + vreg_l4e: ldo4 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = ; + }; + + vreg_l5e: ldo5 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = ; + }; + + vreg_l6e: ldo6 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = ; + }; + + vreg_l7e: ldo7 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = ; + }; + + vreg_l8e: ldo8 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = ; + }; + + vreg_l9e: ldo9 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = ; + }; + + vreg_l10e: ldo10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3401000>; + regulator-initial-mode = ; + }; + + vreg_l11e: ldo11 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3401000>; + regulator-initial-mode = ; + }; + + vreg_bob: bob { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <5492000>; + regulator-initial-mode = ; + regulator-allow-bypass; + }; + }; +}; + +&cdsp { + status = "okay"; + firmware-name = "qcom/sm7225/fairphone4/cdsp.mdt"; +}; + +&i2c10 { + status = "okay"; + clock-frequency = <400000>; + + haptics@5a { + compatible = "awinic,aw8695"; + reg = <0x5a>; + interrupts-extended = <&tlmm 85 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&tlmm 90 GPIO_ACTIVE_HIGH>; + + awinic,f0-preset = <2350>; + awinic,f0-coefficient = <260>; + awinic,f0-calibration-percent = <7>; + awinic,drive-level = <125>; + + awinic,f0-detection-play-time = <5>; + awinic,f0-detection-wait-time = <3>; + awinic,f0-detection-repeat = <2>; + awinic,f0-detection-trace = <15>; + + awinic,boost-debug = /bits/ 8 <0x30 0xeb 0xd4>; + awinic,tset = /bits/ 8 <0x12>; + awinic,r-spare = /bits/ 8 <0x68>; + + awinic,bemf-upper-threshold = <4104>; + awinic,bemf-lower-threshold = <1016>; + }; +}; + +&mpss { + status = "okay"; + firmware-name = "qcom/sm7225/fairphone4/modem.mdt"; +}; + +&pm6150l_wled { + status = "okay"; + + qcom,switching-freq = <800>; + qcom,current-limit-microamp = <20000>; + qcom,num-strings = <2>; +}; + +&pm6350_gpios { + gpio_keys_pin: gpio-keys-state { + pins = "gpio2"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-pull-up; + input-enable; + power-source = <0>; + }; +}; + +&pm6350_resin { + status = "okay"; + linux,code = ; +}; + +&pm7250b_adc { + adc-chan@4d { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "charger_skin_therm"; + }; + + adc-chan@4f { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "conn_therm"; + }; +}; + +&pm7250b_adc_tm { + status = "okay"; + + charger-skin-therm@0 { + reg = <0>; + io-channels = <&pm7250b_adc ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + conn-therm@1 { + reg = <1>; + io-channels = <&pm7250b_adc ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <13 4>, <56 2>; +}; + +&uart9 { + status = "okay"; +}; + +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 156 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l7e>; + vcc-max-microamp = <800000>; + vccq2-supply = <&vreg_l12a>; + vccq2-max-microamp = <800000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l18a>; + vdda-pll-supply = <&vreg_l22a>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + maximum-speed = "super-speed"; + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdd-supply = <&vreg_l18a>; + vdda-pll-supply = <&vreg_l2a>; + vdda-phy-dpdm-supply = <&vreg_l3a>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l22a>; + vdda-pll-supply = <&vreg_l16a>; +}; + +&wifi { + status = "okay"; + + vdd-0.8-cx-mx-supply = <&vreg_l4a>; + vdd-1.8-xo-supply = <&vreg_l7a>; + vdd-1.3-rfa-supply = <&vreg_l2e>; + vdd-3.3-ch0-supply = <&vreg_l10e>; + vdd-3.3-ch1-supply = <&vreg_l11e>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm7225.dtsi b/arch/arm64/boot/dts/qcom/sm7225.dtsi new file mode 100644 index 000000000..7b2a002ca --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm7225.dtsi @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Luca Weiss + */ + +#include "sm6350.dtsi" + +/* SM7225 uses Kryo 570 instead of Kryo 560 */ +&CPU0 { compatible = "qcom,kryo570"; }; +&CPU1 { compatible = "qcom,kryo570"; }; +&CPU2 { compatible = "qcom,kryo570"; }; +&CPU3 { compatible = "qcom,kryo570"; }; +&CPU4 { compatible = "qcom,kryo570"; }; +&CPU5 { compatible = "qcom,kryo570"; }; +&CPU6 { compatible = "qcom,kryo570"; }; +&CPU7 { compatible = "qcom,kryo570"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts new file mode 100644 index 000000000..368da4c7f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts @@ -0,0 +1,469 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include +#include +#include "sm8150.dtsi" +#include "pm8150.dtsi" +#include "pm8150b.dtsi" +#include "pm8150l.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SM8150 HDK"; + compatible = "qcom,sm8150-hdk", "qcom,sm8150"; + + aliases { + serial0 = &uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + vreg_s4a_1p8: pm8150-s4 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-vol-up { + label = "Volume Up"; + linux,code = ; + gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&apps_rsc { + pm8150-rpmh-regulators { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>; + vdd-l2-l10-supply = <&vreg_bob>; + vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p9>; + vdd-l6-l9-supply = <&vreg_s8c_1p3>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p0>; + vdd-l13-l16-l17-supply = <&vreg_bob>; + + vreg_s5a_2p0: smps5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2000000>; + }; + + vreg_s6a_0p9: smps6 { + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <1128000>; + }; + + vdda_wcss_pll: + vreg_l1a_0p75: ldo1 { + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <752000>; + regulator-initial-mode = ; + }; + + vdd_pdphy: + vdda_usb_hs_3p1: + vreg_l2a_3p1: ldo2 { + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + }; + + vreg_l3a_0p8: ldo3 { + regulator-min-microvolt = <480000>; + regulator-max-microvolt = <932000>; + regulator-initial-mode = ; + }; + + vdd_usb_hs_core: + vdda_csi_0_0p9: + vdda_csi_1_0p9: + vdda_csi_2_0p9: + vdda_csi_3_0p9: + vdda_dsi_0_0p9: + vdda_dsi_1_0p9: + vdda_dsi_0_pll_0p9: + vdda_dsi_1_pll_0p9: + vdda_pcie_1ln_core: + vdda_pcie_2ln_core: + vdda_pll_hv_cc_ebi01: + vdda_pll_hv_cc_ebi23: + vdda_qrefs_0p875_5: + vdda_sp_sensor: + vdda_ufs_2ln_core_1: + vdda_ufs_2ln_core_2: + vdda_qlink_lv: + vdda_qlink_lv_ck: + vreg_l5a_0p875: ldo5 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + }; + + vreg_l6a_1p2: ldo6 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vddpx_10: + vreg_l9a_1p2: ldo9 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l10a_2p5: ldo10 { + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l11a_0p8: ldo11 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = ; + }; + + vdd_qfprom: + vdd_qfprom_sp: + vdda_apc_cs_1p8: + vdda_gfx_cs_1p8: + vdda_usb_hs_1p8: + vdda_qrefs_vref_1p8: + vddpx_10_a: + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l13a_2p7: ldo13 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + regulator-initial-mode = ; + }; + + vreg_l14a_1p8: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1880000>; + regulator-initial-mode = ; + }; + + vreg_l15a_1p7: ldo15 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1704000>; + regulator-initial-mode = ; + }; + + vreg_l16a_2p7: ldo16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l17a_3p0: ldo17 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l18a_0p8: ldo18 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + }; + }; + + pm8150l-rpmh-regulators { + compatible = "qcom,pm8150l-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + + vdd-l1-l8-supply = <&vreg_s4a_1p8>; + vdd-l2-l3-supply = <&vreg_s8c_1p3>; + vdd-l4-l5-l6-supply = <&vreg_bob>; + vdd-l7-l11-supply = <&vreg_bob>; + vdd-l9-l10-supply = <&vreg_bob>; + + vdd-bob-supply = <&vph_pwr>; + vdd-flash-supply = <&vreg_bob>; + vdd-rgb-supply = <&vreg_bob>; + + vreg_bob: bob { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <4000000>; + regulator-initial-mode = ; + regulator-allow-bypass; + }; + + vreg_s8c_1p3: smps8 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vdda_wcss_adcdac_1: + vdda_wcss_adcdac_22: + vreg_l2c_1p3: ldo2 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = ; + }; + + vdda_hv_ebi0: + vdda_hv_ebi1: + vdda_hv_ebi2: + vdda_hv_ebi3: + vdda_hv_refgen0: + vdda_qlink_hv_ck: + vreg_l3c_1p2: ldo3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vddpx_5: + vreg_l4c_1p8: ldo4 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = ; + }; + + vddpx_6: + vreg_l5c_1p8: ldo5 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = ; + }; + + vddpx_2: + vreg_l6c_2p9: ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l7c_3p0: ldo7 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = ; + }; + + vreg_l8c_1p8: ldo8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l9c_2p9: ldo9 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l10c_3p3: ldo10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + }; + + vreg_l11c_3p3: ldo11 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + }; + }; + + pm8009-rpmh-regulators { + compatible = "qcom,pm8009-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vreg_bob>; + + vdd-l2-supply = <&vreg_s8c_1p3>; + vdd-l5-l6-supply = <&vreg_bob>; + + vreg_l2f_1p2: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l5f_2p85: ldo5 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = ; + }; + + vreg_l6f_2p85: ldo6 { + regulator-initial-mode = ; + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <2856000>; + }; + }; +}; + +&gmu { + status = "okay"; +}; + +&gpu { + status = "okay"; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + status = "okay"; + + linux,code = ; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&remoteproc_adsp { + status = "okay"; + + firmware-name = "qcom/sm8150/adsp.mbn"; +}; + +&remoteproc_cdsp { + status = "okay"; + + firmware-name = "qcom/sm8150/cdsp.mbn"; +}; + +&remoteproc_slpi { + status = "okay"; + + firmware-name = "qcom/sm8150/slpi.mbn"; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <126 4>; +}; + +&uart2 { + status = "okay"; +}; + +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l10a_2p5>; + vcc-max-microamp = <750000>; + vccq-supply = <&vreg_l9a_1p2>; + vccq-max-microamp = <700000>; + vccq2-supply = <&vreg_s4a_1p8>; + vccq2-max-microamp = <750000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vdda_ufs_2ln_core_1>; + vdda-pll-supply = <&vreg_l3c_1p2>; +}; + +&usb_1_hsphy { + status = "okay"; + vdda-pll-supply = <&vdd_usb_hs_core>; + vdda33-supply = <&vdda_usb_hs_3p1>; + vdda18-supply = <&vdda_usb_hs_1p8>; +}; + +&usb_2_hsphy { + status = "okay"; + vdda-pll-supply = <&vdd_usb_hs_core>; + vdda33-supply = <&vdda_usb_hs_3p1>; + vdda18-supply = <&vdda_usb_hs_1p8>; +}; + +&usb_1_qmpphy { + status = "okay"; + vdda-phy-supply = <&vreg_l3c_1p2>; + vdda-pll-supply = <&vreg_l18a_0p8>; +}; + +&usb_2_qmpphy { + status = "okay"; + vdda-phy-supply = <&vreg_l3c_1p2>; + vdda-pll-supply = <&vreg_l5a_0p875>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts new file mode 100644 index 000000000..bb278ecac --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts @@ -0,0 +1,538 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (C) 2021, Microsoft Corporation + */ + +/dts-v1/; + +#include +#include +#include "sm8150.dtsi" +#include "pm8150.dtsi" +#include "pm8150b.dtsi" +#include "pm8150l.dtsi" + +/ { + model = "Microsoft Surface Duo"; + compatible = "microsoft,surface-duo", "qcom,sm8150"; + chassis-type = "handset"; + + aliases { + serial0 = &uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + /* + * Apparently RPMh does not provide support for PM8150 S4 because it + * is always-on; model it as a fixed regulator. + */ + vreg_s4a_1p8: pm8150-s4 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-vol-up { + label = "Volume Up"; + gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&apps_rsc { + pm8150-rpmh-regulators { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>; + vdd-l2-l10-supply = <&vreg_bob>; + vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p9>; + vdd-l6-l9-supply = <&vreg_s8c_1p3>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p0>; + vdd-l13-l16-l17-supply = <&vreg_bob>; + + vreg_s5a_2p0: smps5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2000000>; + }; + + vreg_s6a_0p9: smps6 { + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <1128000>; + }; + + vdda_wcss_pll: + vreg_l1a_0p75: ldo1 { + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <752000>; + regulator-initial-mode = ; + }; + + vdd_pdphy: + vdda_usb_hs_3p1: + vreg_l2a_3p1: ldo2 { + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + }; + + vreg_l3a_0p8: ldo3 { + regulator-min-microvolt = <480000>; + regulator-max-microvolt = <932000>; + regulator-initial-mode = ; + }; + + vdd_usb_hs_core: + vdda_csi_0_0p9: + vdda_csi_1_0p9: + vdda_csi_2_0p9: + vdda_csi_3_0p9: + vdda_dsi_0_0p9: + vdda_dsi_1_0p9: + vdda_dsi_0_pll_0p9: + vdda_dsi_1_pll_0p9: + vdda_pcie_1ln_core: + vdda_pcie_2ln_core: + vdda_pll_hv_cc_ebi01: + vdda_pll_hv_cc_ebi23: + vdda_qrefs_0p875_5: + vdda_sp_sensor: + vdda_ufs_2ln_core_1: + vdda_ufs_2ln_core_2: + vdda_usb_ss_dp_core_1: + vdda_usb_ss_dp_core_2: + vdda_qlink_lv: + vdda_qlink_lv_ck: + vreg_l5a_0p875: ldo5 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + }; + + vreg_l6a_1p2: ldo6 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vddpx_10: + vreg_l9a_1p2: ldo9 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l10a_2p5: ldo10 { + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l11a_0p8: ldo11 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = ; + }; + + vdd_qfprom: + vdd_qfprom_sp: + vdda_apc_cs_1p8: + vdda_gfx_cs_1p8: + vdda_usb_hs_1p8: + vdda_qrefs_vref_1p8: + vddpx_10_a: + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l13a_2p7: ldo13 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + regulator-initial-mode = ; + }; + + vreg_l14a_1p8: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1880000>; + regulator-initial-mode = ; + }; + + vreg_l15a_1p7: ldo15 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1704000>; + regulator-initial-mode = ; + }; + + vreg_l16a_2p7: ldo16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l17a_3p0: ldo17 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + }; + + pm8150l-rpmh-regulators { + compatible = "qcom,pm8150l-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + + vdd-l1-l8-supply = <&vreg_s4a_1p8>; + vdd-l2-l3-supply = <&vreg_s8c_1p3>; + vdd-l4-l5-l6-supply = <&vreg_bob>; + vdd-l7-l11-supply = <&vreg_bob>; + vdd-l9-l10-supply = <&vreg_bob>; + + vdd-bob-supply = <&vph_pwr>; + vdd-flash-supply = <&vreg_bob>; + vdd-rgb-supply = <&vreg_bob>; + + vreg_bob: bob { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <4000000>; + regulator-initial-mode = ; + regulator-allow-bypass; + }; + + vreg_s8c_1p3: smps8 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vdda_wcss_adcdac_1: + vdda_wcss_adcdac_22: + vreg_l2c_1p3: ldo2 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = ; + }; + + vdda_hv_ebi0: + vdda_hv_ebi1: + vdda_hv_ebi2: + vdda_hv_ebi3: + vdda_hv_refgen0: + vdda_qlink_hv_ck: + vreg_l3c_1p2: ldo3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vddpx_5: + vreg_l4c_1p8: ldo4 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = ; + }; + + vddpx_6: + vreg_l5c_1p8: ldo5 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = ; + }; + + vddpx_2: + vreg_l6c_2p9: ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l7c_3p0: ldo7 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = ; + }; + + vreg_l8c_1p8: ldo8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l9c_2p9: ldo9 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l10c_3p3: ldo10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + }; + + vreg_l11c_3p3: ldo11 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + }; + }; + + pm8009-rpmh-regulators { + compatible = "qcom,pm8009-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vreg_bob>; + + vdd-l2-supply = <&vreg_s8c_1p3>; + vdd-l5-l6-supply = <&vreg_bob>; + + vreg_l2f_1p2: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l5f_2p85: ldo5 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = ; + }; + + vreg_l6f_2p85: ldo6 { + regulator-initial-mode = ; + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <2856000>; + }; + }; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + bq27742@55 { + compatible = "ti,bq27742"; + reg = <0x55>; + }; + + da7280@4a { + compatible = "dlg,da7280"; + reg = <0x4a>; + interrupts-extended = <&tlmm 42 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "da7280_default"; + pinctrl-0 = <&da7280_intr_default>; + + dlg,actuator-type = "LRA"; + dlg,dlg,const-op-mode = <1>; + dlg,dlg,periodic-op-mode = <1>; + dlg,nom-microvolt = <2000000>; + dlg,abs-max-microvolt = <2000000>; + dlg,imax-microamp = <129000>; + dlg,resonant-freq-hz = <180>; + dlg,impd-micro-ohms = <14300000>; + dlg,freq-track-enable; + dlg,bemf-sens-enable; + dlg,mem-array = < + 0x06 0x08 0x10 0x11 0x12 0x13 0x14 0x15 0x1c 0x2a + 0x33 0x3c 0x42 0x4b 0x4c 0x4e 0x17 0x19 0x27 0x29 + 0x17 0x19 0x03 0x84 0x5e 0x04 0x08 0x84 0x5d 0x01 + 0x84 0x5e 0x02 0x00 0xa4 0x5d 0x03 0x84 0x5e 0x06 + 0x08 0x84 0x5d 0x05 0x84 0x5d 0x06 0x84 0x5e 0x08 + 0x84 0x5e 0x05 0x8c 0x5e 0x24 0x84 0x5f 0x10 0x84 + 0x5e 0x05 0x84 0x5e 0x08 0x84 0x5f 0x01 0x8c 0x5e + 0x04 0x84 0x5e 0x08 0x84 0x5f 0x11 0x19 0x88 0x00 + 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 + 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 + >; + }; + + /* SMB1381 @ 0x44 */ + /* MAX34417 @ 0x1c */ +}; + +&i2c4 { + status = "okay"; + clock-frequency = <400000>; + + /* SMB1355 @ 0x0c */ + /* SMB1390 @ 0x10 */ +}; + +&i2c17 { + status = "okay"; + clock-frequency = <400000>; + + bq27742@55 { + compatible = "ti,bq27742"; + reg = <0x55>; + }; +}; + +&i2c19 { + status = "okay"; + clock-frequency = <400000>; + + /* MAX34417 @ 0x12 */ + /* MAX34417 @ 0x1a */ + /* MAX34417 @ 0x1e */ +}; + +&pon_pwrkey { + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&qupv3_id_2 { + status = "okay"; +}; + +&remoteproc_adsp { + status = "okay"; + firmware-name = "qcom/sm8150/microsoft/adsp.mdt"; +}; + +&remoteproc_cdsp { + status = "okay"; + firmware-name = "qcom/sm8150/microsoft/cdsp.mdt"; +}; + +&remoteproc_mpss { + status = "okay"; + firmware-name = "qcom/sm8150/microsoft/modem.mdt"; +}; + +&remoteproc_slpi { + status = "okay"; + firmware-name = "qcom/sm8150/microsoft/slpi.mdt"; +}; + +&pon_resin { + status = "okay"; + + linux,code = ; +}; + +&tlmm { + gpio-reserved-ranges = <126 4>; + + da7280_intr_default: da7280-intr-default { + pins = "gpio42"; + function = "gpio"; + bias-pull-up; + input-enable; + }; +}; + +&uart2 { + status = "okay"; +}; + +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l10a_2p5>; + vcc-max-microamp = <750000>; + vccq-supply = <&vreg_l9a_1p2>; + vccq-max-microamp = <700000>; + vccq2-supply = <&vreg_s4a_1p8>; + vccq2-max-microamp = <750000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vdda_ufs_2ln_core_1>; + vdda-pll-supply = <&vreg_l3c_1p2>; +}; + +&usb_1_hsphy { + status = "okay"; + vdda-pll-supply = <&vdd_usb_hs_core>; + vdda33-supply = <&vdda_usb_hs_3p1>; + vdda18-supply = <&vdda_usb_hs_1p8>; +}; + +&usb_1_qmpphy { + status = "okay"; + vdda-phy-supply = <&vreg_l3c_1p2>; + vdda-pll-supply = <&vdda_usb_ss_dp_core_1>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&wifi { + status = "okay"; + + vdd-0.8-cx-mx-supply = <&vdda_wcss_pll>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vdda_wcss_adcdac_1>; + vdd-3.3-ch0-supply = <&vreg_l11c_3p3>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts new file mode 100644 index 000000000..46b5cf9a1 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts @@ -0,0 +1,450 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2019, Linaro Limited + */ + +/dts-v1/; + +#include +#include +#include "sm8150.dtsi" +#include "pm8150.dtsi" +#include "pm8150b.dtsi" +#include "pm8150l.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SM8150 MTP"; + compatible = "qcom,sm8150-mtp", "qcom,sm8150"; + + aliases { + serial0 = &uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + /* + * Apparently RPMh does not provide support for PM8150 S4 because it + * is always-on; model it as a fixed regulator. + */ + vreg_s4a_1p8: pm8150-s4 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; +}; + +&apps_rsc { + pm8150-rpmh-regulators { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>; + vdd-l2-l10-supply = <&vreg_bob>; + vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p9>; + vdd-l6-l9-supply = <&vreg_s8c_1p3>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p0>; + vdd-l13-l16-l17-supply = <&vreg_bob>; + + vreg_s5a_2p0: smps5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2000000>; + }; + + vreg_s6a_0p9: smps6 { + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <1128000>; + }; + + vdda_wcss_pll: + vreg_l1a_0p75: ldo1 { + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <752000>; + regulator-initial-mode = ; + }; + + vdd_pdphy: + vdda_usb_hs_3p1: + vreg_l2a_3p1: ldo2 { + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + }; + + vreg_l3a_0p8: ldo3 { + regulator-min-microvolt = <480000>; + regulator-max-microvolt = <932000>; + regulator-initial-mode = ; + }; + + vdd_usb_hs_core: + vdda_csi_0_0p9: + vdda_csi_1_0p9: + vdda_csi_2_0p9: + vdda_csi_3_0p9: + vdda_dsi_0_0p9: + vdda_dsi_1_0p9: + vdda_dsi_0_pll_0p9: + vdda_dsi_1_pll_0p9: + vdda_pcie_1ln_core: + vdda_pcie_2ln_core: + vdda_pll_hv_cc_ebi01: + vdda_pll_hv_cc_ebi23: + vdda_qrefs_0p875_5: + vdda_sp_sensor: + vdda_ufs_2ln_core_1: + vdda_ufs_2ln_core_2: + vdda_usb_ss_dp_core_1: + vdda_usb_ss_dp_core_2: + vdda_qlink_lv: + vdda_qlink_lv_ck: + vreg_l5a_0p875: ldo5 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + }; + + vreg_l6a_1p2: ldo6 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vddpx_10: + vreg_l9a_1p2: ldo9 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l10a_2p5: ldo10 { + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l11a_0p8: ldo11 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = ; + }; + + vdd_qfprom: + vdd_qfprom_sp: + vdda_apc_cs_1p8: + vdda_gfx_cs_1p8: + vdda_usb_hs_1p8: + vdda_qrefs_vref_1p8: + vddpx_10_a: + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l13a_2p7: ldo13 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + regulator-initial-mode = ; + }; + + vreg_l14a_1p8: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1880000>; + regulator-initial-mode = ; + }; + + vreg_l15a_1p7: ldo15 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1704000>; + regulator-initial-mode = ; + }; + + vreg_l16a_2p7: ldo16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l17a_3p0: ldo17 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + }; + + pm8150l-rpmh-regulators { + compatible = "qcom,pm8150l-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + + vdd-l1-l8-supply = <&vreg_s4a_1p8>; + vdd-l2-l3-supply = <&vreg_s8c_1p3>; + vdd-l4-l5-l6-supply = <&vreg_bob>; + vdd-l7-l11-supply = <&vreg_bob>; + vdd-l9-l10-supply = <&vreg_bob>; + + vdd-bob-supply = <&vph_pwr>; + vdd-flash-supply = <&vreg_bob>; + vdd-rgb-supply = <&vreg_bob>; + + vreg_bob: bob { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <4000000>; + regulator-initial-mode = ; + regulator-allow-bypass; + }; + + vreg_s8c_1p3: smps8 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vdda_wcss_adcdac_1: + vdda_wcss_adcdac_22: + vreg_l2c_1p3: ldo2 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = ; + }; + + vdda_hv_ebi0: + vdda_hv_ebi1: + vdda_hv_ebi2: + vdda_hv_ebi3: + vdda_hv_refgen0: + vdda_qlink_hv_ck: + vreg_l3c_1p2: ldo3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vddpx_5: + vreg_l4c_1p8: ldo4 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = ; + }; + + vddpx_6: + vreg_l5c_1p8: ldo5 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = ; + }; + + vddpx_2: + vreg_l6c_2p9: ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l7c_3p0: ldo7 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = ; + }; + + vreg_l8c_1p8: ldo8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l9c_2p9: ldo9 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l10c_3p3: ldo10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + }; + + vreg_l11c_3p3: ldo11 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + }; + }; + + pm8009-rpmh-regulators { + compatible = "qcom,pm8009-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vreg_bob>; + + vdd-l2-supply = <&vreg_s8c_1p3>; + vdd-l5-l6-supply = <&vreg_bob>; + + vreg_l2f_1p2: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l5f_2p85: ldo5 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = ; + }; + + vreg_l6f_2p85: ldo6 { + regulator-initial-mode = ; + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <2856000>; + }; + }; +}; + +&gmu { + status = "okay"; +}; + +&gpu { + status = "okay"; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + status = "okay"; + + linux,code = ; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&remoteproc_adsp { + status = "okay"; + firmware-name = "qcom/sm8150/adsp.mdt"; +}; + +&remoteproc_cdsp { + status = "okay"; + firmware-name = "qcom/sm8150/cdsp.mdt"; +}; + +&remoteproc_mpss { + status = "okay"; + firmware-name = "qcom/sm8150/modem.mdt"; +}; + +&remoteproc_slpi { + status = "okay"; + firmware-name = "qcom/sm8150/slpi.mdt"; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <126 4>; +}; + +&uart2 { + status = "okay"; +}; + +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l10a_2p5>; + vcc-max-microamp = <750000>; + vccq-supply = <&vreg_l9a_1p2>; + vccq-max-microamp = <700000>; + vccq2-supply = <&vreg_s4a_1p8>; + vccq2-max-microamp = <750000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vdda_ufs_2ln_core_1>; + vdda-pll-supply = <&vreg_l3c_1p2>; +}; + +&usb_1_hsphy { + status = "okay"; + vdda-pll-supply = <&vdd_usb_hs_core>; + vdda33-supply = <&vdda_usb_hs_3p1>; + vdda18-supply = <&vdda_usb_hs_1p8>; +}; + +&usb_1_qmpphy { + status = "okay"; + vdda-phy-supply = <&vreg_l3c_1p2>; + vdda-pll-supply = <&vdda_usb_ss_dp_core_1>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&wifi { + status = "okay"; + + vdd-0.8-cx-mx-supply = <&vdda_wcss_pll>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vdda_wcss_adcdac_1>; + vdd-3.3-ch0-supply = <&vreg_l11c_3p3>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-bahamut.dts b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-bahamut.dts new file mode 100644 index 000000000..b27804032 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-bahamut.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio + */ + +/dts-v1/; + +#include "sm8150-sony-xperia-kumano.dtsi" + +/ { + model = "Sony Xperia 5"; + compatible = "sony,bahamut-generic", "qcom,sm8150"; + chassis-type = "handset"; +}; + +&framebuffer { + width = <1080>; + height = <2520>; + stride = <(1080 * 4)>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-griffin.dts b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-griffin.dts new file mode 100644 index 000000000..0d6deceed --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-griffin.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio + */ + +/dts-v1/; + +#include "sm8150-sony-xperia-kumano.dtsi" + +/ { + model = "Sony Xperia 1"; + compatible = "sony,griffin-generic", "qcom,sm8150"; + chassis-type = "handset"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi new file mode 100644 index 000000000..c9aa7764f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi @@ -0,0 +1,459 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio + */ + +/dts-v1/; + +#include +#include +#include "sm8150.dtsi" +#include "pm8150.dtsi" +#include "pm8150b.dtsi" +#include "pm8150l.dtsi" + +/delete-node/ &cdsp_mem; +/delete-node/ &gpu_mem; +/delete-node/ &ipa_fw_mem; +/delete-node/ &ipa_gsi_mem; +/delete-node/ &mpss_mem; +/delete-node/ &slpi_mem; +/delete-node/ &spss_mem; +/delete-node/ &venus_mem; + +/ { + qcom,msm-id = <339 0x20000>; /* SM8150 v2 */ + qcom,board-id = <8 0>; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer: framebuffer@9c000000 { + compatible = "simple-framebuffer"; + reg = <0 0x9c000000 0 0x2300000>; + /* Griffin BL initializes in 2.5k mode, not 4k */ + width = <1096>; + height = <2560>; + stride = <(1096 * 4)>; + format = "a8r8g8b8"; + /* + * That's (going to be) a lot of clocks, but it's necessary due + * to unused clk cleanup & no panel driver yet (& no dispcc either).. + */ + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + /* + * Apparently RPMh does not provide support for PM8150 S4 because it + * is always-on; model it as a fixed regulator. + */ + vreg_s4a_1p8: pm8150-s4 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; + + reserved-memory { + mpss_mem: memory@8dc00000 { + reg = <0x0 0x8dc00000 0x0 0x9600000>; + no-map; + }; + + venus_mem: memory@97200000 { + reg = <0x0 0x97200000 0x0 0x500000>; + no-map; + }; + + slpi_mem: memory@97700000 { + reg = <0x0 0x97700000 0x0 0x1400000>; + no-map; + }; + + ipa_fw_mem: memory@98b00000 { + reg = <0x0 0x98b00000 0x0 0x10000>; + no-map; + }; + + ipa_gsi_mem: memory@98b10000 { + reg = <0x0 0x98b10000 0x0 0x5000>; + no-map; + }; + + gpu_mem: memory@98b15000 { + reg = <0x0 0x98b15000 0x0 0x2000>; + no-map; + }; + + spss_mem: memory@98c00000 { + reg = <0x0 0x98c00000 0x0 0x100000>; + no-map; + }; + + cdsp_mem: memory@98d00000 { + reg = <0x0 0x98d00000 0x0 0x1400000>; + no-map; + }; + + cont_splash_mem: memory@9c000000 { + reg = <0x0 0x9c000000 0x0 0x2400000>; + no-map; + }; + + cdsp_sec_mem: memory@a4c00000 { + reg = <0x0 0xa4c00000 0x0 0x3c00000>; + no-map; + }; + + ramoops@ffc00000 { + compatible = "ramoops"; + reg = <0x0 0xffc00000 0x0 0x100000>; + record-size = <0x1000>; + console-size = <0x40000>; + pmsg-size = <0x20000>; + ecc-size = <16>; + no-map; + }; + }; +}; + +&adsp_mem { + reg = <0x0 0x8be00000 0x0 0x1e00000>; +}; + +&apps_rsc { + pm8150-rpmh-regulators { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>; + vdd-l2-l10-supply = <&vreg_bob>; + vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p9>; + vdd-l6-l9-supply = <&vreg_s8c_1p3>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>; + vdd-l13-l16-l17-supply = <&vreg_bob>; + + vreg_s2a_0p6: smps2 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <600000>; + regulator-initial-mode = ; + }; + + vreg_s5a_1p9: smps5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + regulator-initial-mode = ; + }; + + vreg_s6a_0p9: smps6 { + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <1128000>; + regulator-initial-mode = ; + }; + + vreg_l1a_0p75: ldo1 { + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <752000>; + regulator-initial-mode = ; + }; + + vreg_l2a_3p1: ldo2 { + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + }; + + vreg_l3a_0p8: ldo3 { + regulator-min-microvolt = <480000>; + regulator-max-microvolt = <932000>; + regulator-initial-mode = ; + }; + + vreg_l5a_0p875: ldo5 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + }; + + vreg_l6a_1p2: ldo6 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l9a_1p2: ldo9 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l10a_2p5: ldo10 { + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l11a_0p8: ldo11 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = ; + }; + + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + /* L13 is unused. */ + + vreg_l14a_1p8: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l15a_1p7: ldo15 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1704000>; + regulator-initial-mode = ; + }; + + vreg_l16a_2p7: ldo16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l17a_3p0: ldo17 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l18a_0p8: ldo18 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + }; + }; + + pm8150l-rpmh-regulators { + compatible = "qcom,pm8150l-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + + vdd-l1-l8-supply = <&vreg_s4a_1p8>; + vdd-l2-l3-supply = <&vreg_s8c_1p3>; + vdd-l4-l5-l6-supply = <&vreg_bob>; + vdd-l7-l11-supply = <&vreg_bob>; + vdd-l9-l10-supply = <&vreg_bob>; + + vdd-bob-supply = <&vph_pwr>; + vdd-flash-supply = <&vreg_bob>; + vdd-rgb-supply = <&vreg_bob>; + + vreg_bob: bob { + regulator-min-microvolt = <3350000>; + regulator-max-microvolt = <4000000>; + regulator-initial-mode = ; + regulator-allow-bypass; + }; + + vreg_s1c_1p1: smps1 { + regulator-min-microvolt = <1128000>; + regulator-max-microvolt = <1128000>; + regulator-initial-mode = ; + }; + + vreg_s8c_1p3: smps8 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + regulator-initial-mode = ; + }; + + vreg_l1c_1p8: ldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l2c_1p3: ldo2 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = ; + }; + + vreg_l3c_1p2: ldo3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l4c_1p8: ldo4 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = ; + }; + + vreg_l5c_1p8: ldo5 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = ; + }; + + vreg_l6c_2p9: ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = + ; + }; + + vreg_l7c_3p0: ldo7 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = ; + }; + + vreg_l8c_1p8: ldo8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l9c_2p9: ldo9 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = + ; + }; + + vreg_l10c_3p3: ldo10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + }; + + vreg_l11c_3p3: ldo11 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + }; + }; + + /* PM8009 is not present on these boards, even if downstream sources suggest so. */ +}; + +&i2c4 { + status = "okay"; + + /* Qcom SMB1355 @ c */ + /* Qcom SMB1390 @ 10 */ + /* NXP PN553 NFC @ 28 */ + /* Qcom FSA4480 USB-C audio switch @ 43 */ +}; + +&i2c7 { + status = "okay"; + + /* AMS TCS3490 RGB+IR color sensor @ 72 */ +}; + +&i2c10 { + status = "okay"; + + /* Samsung touchscreen @ 48 */ +}; + +&pon_pwrkey { + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <126 4>; +}; + +&uart2 { + status = "okay"; +}; + +/* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE WILL DIE! */ +&ufs_mem_hc { status = "disabled"; }; +&ufs_mem_phy { status = "disabled"; }; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; + vdda-pll-supply = <&vreg_l5a_0p875>; + vdda33-supply = <&vreg_l2a_3p1>; + vdda18-supply = <&vreg_l12a_1p8>; +}; + +&usb_1_qmpphy { + status = "okay"; + vdda-phy-supply = <&vreg_l3c_1p2>; + vdda-pll-supply = <&vreg_l18a_0p8>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi new file mode 100644 index 000000000..8efd0e227 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -0,0 +1,4946 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2019, Linaro Limited + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <38400000>; + clock-output-names = "xo_board"; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32764>; + clock-output-names = "sleep_clk"; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x0>; + enable-method = "psci"; + capacity-dmips-mhz = <488>; + dynamic-power-coefficient = <232>; + next-level-cache = <&L2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; + #cooling-cells = <2>; + L2_0: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x100>; + enable-method = "psci"; + capacity-dmips-mhz = <488>; + dynamic-power-coefficient = <232>; + next-level-cache = <&L2_100>; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; + #cooling-cells = <2>; + L2_100: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x200>; + enable-method = "psci"; + capacity-dmips-mhz = <488>; + dynamic-power-coefficient = <232>; + next-level-cache = <&L2_200>; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; + #cooling-cells = <2>; + L2_200: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x300>; + enable-method = "psci"; + capacity-dmips-mhz = <488>; + dynamic-power-coefficient = <232>; + next-level-cache = <&L2_300>; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; + #cooling-cells = <2>; + L2_300: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x400>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <369>; + next-level-cache = <&L2_400>; + qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD4>; + power-domain-names = "psci"; + #cooling-cells = <2>; + L2_400: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x500>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <369>; + next-level-cache = <&L2_500>; + qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD5>; + power-domain-names = "psci"; + #cooling-cells = <2>; + L2_500: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x600>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <369>; + next-level-cache = <&L2_600>; + qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD6>; + power-domain-names = "psci"; + #cooling-cells = <2>; + L2_600: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x700>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <421>; + next-level-cache = <&L2_700>; + qcom,freq-domain = <&cpufreq_hw 2>; + operating-points-v2 = <&cpu7_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD7>; + power-domain-names = "psci"; + #cooling-cells = <2>; + L2_700: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + + core4 { + cpu = <&CPU4>; + }; + + core5 { + cpu = <&CPU5>; + }; + + core6 { + cpu = <&CPU6>; + }; + + core7 { + cpu = <&CPU7>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "little-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <355>; + exit-latency-us = <909>; + min-residency-us = <3934>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "big-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <241>; + exit-latency-us = <1461>; + min-residency-us = <4488>; + local-timer-stop; + }; + }; + + domain-idle-states { + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "domain-idle-state"; + idle-state-name = "cluster-power-collapse"; + arm,psci-suspend-param = <0x4100c244>; + entry-latency-us = <3263>; + exit-latency-us = <6562>; + min-residency-us = <9987>; + local-timer-stop; + }; + }; + }; + + cpu0_opp_table: opp-table-cpu0 { + compatible = "operating-points-v2"; + opp-shared; + + cpu0_opp1: opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-peak-kBps = <800000 9600000>; + }; + + cpu0_opp2: opp-403200000 { + opp-hz = /bits/ 64 <403200000>; + opp-peak-kBps = <800000 9600000>; + }; + + cpu0_opp3: opp-499200000 { + opp-hz = /bits/ 64 <499200000>; + opp-peak-kBps = <800000 12902400>; + }; + + cpu0_opp4: opp-576000000 { + opp-hz = /bits/ 64 <576000000>; + opp-peak-kBps = <800000 12902400>; + }; + + cpu0_opp5: opp-672000000 { + opp-hz = /bits/ 64 <672000000>; + opp-peak-kBps = <800000 15974400>; + }; + + cpu0_opp6: opp-768000000 { + opp-hz = /bits/ 64 <768000000>; + opp-peak-kBps = <1804000 19660800>; + }; + + cpu0_opp7: opp-844800000 { + opp-hz = /bits/ 64 <844800000>; + opp-peak-kBps = <1804000 19660800>; + }; + + cpu0_opp8: opp-940800000 { + opp-hz = /bits/ 64 <940800000>; + opp-peak-kBps = <1804000 22732800>; + }; + + cpu0_opp9: opp-1036800000 { + opp-hz = /bits/ 64 <1036800000>; + opp-peak-kBps = <1804000 22732800>; + }; + + cpu0_opp10: opp-1113600000 { + opp-hz = /bits/ 64 <1113600000>; + opp-peak-kBps = <2188000 25804800>; + }; + + cpu0_opp11: opp-1209600000 { + opp-hz = /bits/ 64 <1209600000>; + opp-peak-kBps = <2188000 31948800>; + }; + + cpu0_opp12: opp-1305600000 { + opp-hz = /bits/ 64 <1305600000>; + opp-peak-kBps = <3072000 31948800>; + }; + + cpu0_opp13: opp-1382400000 { + opp-hz = /bits/ 64 <1382400000>; + opp-peak-kBps = <3072000 31948800>; + }; + + cpu0_opp14: opp-1478400000 { + opp-hz = /bits/ 64 <1478400000>; + opp-peak-kBps = <3072000 31948800>; + }; + + cpu0_opp15: opp-1555200000 { + opp-hz = /bits/ 64 <1555200000>; + opp-peak-kBps = <3072000 40550400>; + }; + + cpu0_opp16: opp-1632000000 { + opp-hz = /bits/ 64 <1632000000>; + opp-peak-kBps = <3072000 40550400>; + }; + + cpu0_opp17: opp-1708800000 { + opp-hz = /bits/ 64 <1708800000>; + opp-peak-kBps = <3072000 43008000>; + }; + + cpu0_opp18: opp-1785600000 { + opp-hz = /bits/ 64 <1785600000>; + opp-peak-kBps = <3072000 43008000>; + }; + }; + + cpu4_opp_table: opp-table-cpu4 { + compatible = "operating-points-v2"; + opp-shared; + + cpu4_opp1: opp-710400000 { + opp-hz = /bits/ 64 <710400000>; + opp-peak-kBps = <1804000 15974400>; + }; + + cpu4_opp2: opp-825600000 { + opp-hz = /bits/ 64 <825600000>; + opp-peak-kBps = <2188000 19660800>; + }; + + cpu4_opp3: opp-940800000 { + opp-hz = /bits/ 64 <940800000>; + opp-peak-kBps = <2188000 22732800>; + }; + + cpu4_opp4: opp-1056000000 { + opp-hz = /bits/ 64 <1056000000>; + opp-peak-kBps = <3072000 25804800>; + }; + + cpu4_opp5: opp-1171200000 { + opp-hz = /bits/ 64 <1171200000>; + opp-peak-kBps = <3072000 31948800>; + }; + + cpu4_opp6: opp-1286400000 { + opp-hz = /bits/ 64 <1286400000>; + opp-peak-kBps = <4068000 31948800>; + }; + + cpu4_opp7: opp-1401600000 { + opp-hz = /bits/ 64 <1401600000>; + opp-peak-kBps = <4068000 31948800>; + }; + + cpu4_opp8: opp-1497600000 { + opp-hz = /bits/ 64 <1497600000>; + opp-peak-kBps = <4068000 40550400>; + }; + + cpu4_opp9: opp-1612800000 { + opp-hz = /bits/ 64 <1612800000>; + opp-peak-kBps = <4068000 40550400>; + }; + + cpu4_opp10: opp-1708800000 { + opp-hz = /bits/ 64 <1708800000>; + opp-peak-kBps = <4068000 43008000>; + }; + + cpu4_opp11: opp-1804800000 { + opp-hz = /bits/ 64 <1804800000>; + opp-peak-kBps = <6220000 43008000>; + }; + + cpu4_opp12: opp-1920000000 { + opp-hz = /bits/ 64 <1920000000>; + opp-peak-kBps = <6220000 49152000>; + }; + + cpu4_opp13: opp-2016000000 { + opp-hz = /bits/ 64 <2016000000>; + opp-peak-kBps = <7216000 49152000>; + }; + + cpu4_opp14: opp-2131200000 { + opp-hz = /bits/ 64 <2131200000>; + opp-peak-kBps = <8368000 49152000>; + }; + + cpu4_opp15: opp-2227200000 { + opp-hz = /bits/ 64 <2227200000>; + opp-peak-kBps = <8368000 51609600>; + }; + + cpu4_opp16: opp-2323200000 { + opp-hz = /bits/ 64 <2323200000>; + opp-peak-kBps = <8368000 51609600>; + }; + + cpu4_opp17: opp-2419200000 { + opp-hz = /bits/ 64 <2419200000>; + opp-peak-kBps = <8368000 51609600>; + }; + }; + + cpu7_opp_table: opp-table-cpu7 { + compatible = "operating-points-v2"; + opp-shared; + + cpu7_opp1: opp-825600000 { + opp-hz = /bits/ 64 <825600000>; + opp-peak-kBps = <2188000 19660800>; + }; + + cpu7_opp2: opp-940800000 { + opp-hz = /bits/ 64 <940800000>; + opp-peak-kBps = <2188000 22732800>; + }; + + cpu7_opp3: opp-1056000000 { + opp-hz = /bits/ 64 <1056000000>; + opp-peak-kBps = <3072000 25804800>; + }; + + cpu7_opp4: opp-1171200000 { + opp-hz = /bits/ 64 <1171200000>; + opp-peak-kBps = <3072000 31948800>; + }; + + cpu7_opp5: opp-1286400000 { + opp-hz = /bits/ 64 <1286400000>; + opp-peak-kBps = <4068000 31948800>; + }; + + cpu7_opp6: opp-1401600000 { + opp-hz = /bits/ 64 <1401600000>; + opp-peak-kBps = <4068000 31948800>; + }; + + cpu7_opp7: opp-1497600000 { + opp-hz = /bits/ 64 <1497600000>; + opp-peak-kBps = <4068000 40550400>; + }; + + cpu7_opp8: opp-1612800000 { + opp-hz = /bits/ 64 <1612800000>; + opp-peak-kBps = <4068000 40550400>; + }; + + cpu7_opp9: opp-1708800000 { + opp-hz = /bits/ 64 <1708800000>; + opp-peak-kBps = <4068000 43008000>; + }; + + cpu7_opp10: opp-1804800000 { + opp-hz = /bits/ 64 <1804800000>; + opp-peak-kBps = <6220000 43008000>; + }; + + cpu7_opp11: opp-1920000000 { + opp-hz = /bits/ 64 <1920000000>; + opp-peak-kBps = <6220000 49152000>; + }; + + cpu7_opp12: opp-2016000000 { + opp-hz = /bits/ 64 <2016000000>; + opp-peak-kBps = <7216000 49152000>; + }; + + cpu7_opp13: opp-2131200000 { + opp-hz = /bits/ 64 <2131200000>; + opp-peak-kBps = <8368000 49152000>; + }; + + cpu7_opp14: opp-2227200000 { + opp-hz = /bits/ 64 <2227200000>; + opp-peak-kBps = <8368000 51609600>; + }; + + cpu7_opp15: opp-2323200000 { + opp-hz = /bits/ 64 <2323200000>; + opp-peak-kBps = <8368000 51609600>; + }; + + cpu7_opp16: opp-2419200000 { + opp-hz = /bits/ 64 <2419200000>; + opp-peak-kBps = <8368000 51609600>; + }; + + cpu7_opp17: opp-2534400000 { + opp-hz = /bits/ 64 <2534400000>; + opp-peak-kBps = <8368000 51609600>; + }; + + cpu7_opp18: opp-2649600000 { + opp-hz = /bits/ 64 <2649600000>; + opp-peak-kBps = <8368000 51609600>; + }; + + cpu7_opp19: opp-2745600000 { + opp-hz = /bits/ 64 <2745600000>; + opp-peak-kBps = <8368000 51609600>; + }; + + cpu7_opp20: opp-2841600000 { + opp-hz = /bits/ 64 <2841600000>; + opp-peak-kBps = <8368000 51609600>; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-sm8150", "qcom,scm"; + #reset-cells = <1>; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x80000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = ; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + + CPU_PD0: cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD1: cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD2: cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD3: cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD4: cpu4 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD5: cpu5 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD6: cpu6 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD7: cpu7 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CLUSTER_PD: cpu-cluster0 { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP_0>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: memory@85700000 { + reg = <0x0 0x85700000 0x0 0x600000>; + no-map; + }; + + xbl_mem: memory@85d00000 { + reg = <0x0 0x85d00000 0x0 0x140000>; + no-map; + }; + + aop_mem: memory@85f00000 { + reg = <0x0 0x85f00000 0x0 0x20000>; + no-map; + }; + + aop_cmd_db: memory@85f20000 { + compatible = "qcom,cmd-db"; + reg = <0x0 0x85f20000 0x0 0x20000>; + no-map; + }; + + smem_mem: memory@86000000 { + reg = <0x0 0x86000000 0x0 0x200000>; + no-map; + }; + + tz_mem: memory@86200000 { + reg = <0x0 0x86200000 0x0 0x3900000>; + no-map; + }; + + rmtfs_mem: memory@89b00000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x89b00000 0x0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + + camera_mem: memory@8b700000 { + reg = <0x0 0x8b700000 0x0 0x500000>; + no-map; + }; + + wlan_mem: memory@8bc00000 { + reg = <0x0 0x8bc00000 0x0 0x180000>; + no-map; + }; + + npu_mem: memory@8bd80000 { + reg = <0x0 0x8bd80000 0x0 0x80000>; + no-map; + }; + + adsp_mem: memory@8be00000 { + reg = <0x0 0x8be00000 0x0 0x1a00000>; + no-map; + }; + + mpss_mem: memory@8d800000 { + reg = <0x0 0x8d800000 0x0 0x9600000>; + no-map; + }; + + venus_mem: memory@96e00000 { + reg = <0x0 0x96e00000 0x0 0x500000>; + no-map; + }; + + slpi_mem: memory@97300000 { + reg = <0x0 0x97300000 0x0 0x1400000>; + no-map; + }; + + ipa_fw_mem: memory@98700000 { + reg = <0x0 0x98700000 0x0 0x10000>; + no-map; + }; + + ipa_gsi_mem: memory@98710000 { + reg = <0x0 0x98710000 0x0 0x5000>; + no-map; + }; + + gpu_mem: memory@98715000 { + reg = <0x0 0x98715000 0x0 0x2000>; + no-map; + }; + + spss_mem: memory@98800000 { + reg = <0x0 0x98800000 0x0 0x100000>; + no-map; + }; + + cdsp_mem: memory@98900000 { + reg = <0x0 0x98900000 0x0 0x1400000>; + no-map; + }; + + qseecom_mem: memory@9e400000 { + reg = <0x0 0x9e400000 0x0 0x1400000>; + no-map; + }; + }; + + smem { + compatible = "qcom,smem"; + memory-region = <&smem_mem>; + hwlocks = <&tcsr_mutex 3>; + }; + + smp2p-cdsp { + compatible = "qcom,smp2p"; + qcom,smem = <94>, <432>; + + interrupts = ; + + mboxes = <&apss_shared 6>; + + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + cdsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + cdsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-lpass { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupts = ; + + mboxes = <&apss_shared 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-mpss { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + + interrupts = ; + + mboxes = <&apss_shared 14>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-slpi { + compatible = "qcom,smp2p"; + qcom,smem = <481>, <430>; + + interrupts = ; + + mboxes = <&apss_shared 26>; + + qcom,local-pid = <0>; + qcom,remote-pid = <3>; + + slpi_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + slpi_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc@0 { + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + compatible = "simple-bus"; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-sm8150"; + reg = <0x0 0x00100000 0x0 0x1f0000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clock-names = "bi_tcxo", + "sleep_clk"; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>; + }; + + gpi_dma0: dma-controller@800000 { + compatible = "qcom,sm8150-gpi-dma"; + reg = <0 0x800000 0 0x60000>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + ; + dma-channels = <13>; + dma-channel-mask = <0xfa>; + iommus = <&apps_smmu 0x00d6 0x0>; + #dma-cells = <3>; + status = "disabled"; + }; + + ethernet: ethernet@20000 { + compatible = "qcom,sm8150-ethqos"; + reg = <0x0 0x00020000 0x0 0x10000>, + <0x0 0x00036000 0x0 0x100>; + reg-names = "stmmaceth", "rgmii"; + clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii"; + clocks = <&gcc GCC_EMAC_AXI_CLK>, + <&gcc GCC_EMAC_SLV_AHB_CLK>, + <&gcc GCC_EMAC_PTP_CLK>, + <&gcc GCC_EMAC_RGMII_CLK>; + interrupts = , + ; + interrupt-names = "macirq", "eth_lpi"; + + power-domains = <&gcc EMAC_GDSC>; + resets = <&gcc GCC_EMAC_BCR>; + + iommus = <&apps_smmu 0x3C0 0x0>; + + snps,tso; + rx-fifo-depth = <4096>; + tx-fifo-depth = <4096>; + + status = "disabled"; + }; + + + qupv3_id_0: geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x008c0000 0x0 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + iommus = <&apps_smmu 0xc3 0x0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + i2c0: i2c@880000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00880000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, + <&gpi_dma0 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c0_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi0: spi@880000 { + compatible = "qcom,geni-spi"; + reg = <0 0x880000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, + <&gpi_dma0 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi0_default>; + interrupts = ; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@884000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00884000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, + <&gpi_dma0 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c1_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@884000 { + compatible = "qcom,geni-spi"; + reg = <0 0x884000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, + <&gpi_dma0 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi1_default>; + interrupts = ; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@888000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00888000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, + <&gpi_dma0 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c2_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@888000 { + compatible = "qcom,geni-spi"; + reg = <0 0x888000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, + <&gpi_dma0 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi2_default>; + interrupts = ; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@88c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0088c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, + <&gpi_dma0 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c3_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi3: spi@88c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x88c000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, + <&gpi_dma0 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi3_default>; + interrupts = ; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@890000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00890000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, + <&gpi_dma0 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c4_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi4: spi@890000 { + compatible = "qcom,geni-spi"; + reg = <0 0x890000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, + <&gpi_dma0 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi4_default>; + interrupts = ; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@894000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00894000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, + <&gpi_dma0 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c5_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi5: spi@894000 { + compatible = "qcom,geni-spi"; + reg = <0 0x894000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, + <&gpi_dma0 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi5_default>; + interrupts = ; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c6: i2c@898000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00898000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>, + <&gpi_dma0 1 6 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c6_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi6: spi@898000 { + compatible = "qcom,geni-spi"; + reg = <0 0x898000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>, + <&gpi_dma0 1 6 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi6_default>; + interrupts = ; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c7: i2c@89c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0089c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>, + <&gpi_dma0 1 7 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c7_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi7: spi@89c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x89c000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>, + <&gpi_dma0 1 7 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi7_default>; + interrupts = ; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + gpi_dma1: dma-controller@a00000 { + compatible = "qcom,sm8150-gpi-dma"; + reg = <0 0xa00000 0 0x60000>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + ; + dma-channels = <13>; + dma-channel-mask = <0xfa>; + iommus = <&apps_smmu 0x0616 0x0>; + #dma-cells = <3>; + status = "disabled"; + }; + + qupv3_id_1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x00ac0000 0x0 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + iommus = <&apps_smmu 0x603 0x0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + i2c8: i2c@a80000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a80000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, + <&gpi_dma1 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c8_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi8: spi@a80000 { + compatible = "qcom,geni-spi"; + reg = <0 0xa80000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, + <&gpi_dma1 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi8_default>; + interrupts = ; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c9: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a84000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, + <&gpi_dma1 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c9_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi9: spi@a84000 { + compatible = "qcom,geni-spi"; + reg = <0 0xa84000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, + <&gpi_dma1 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi9_default>; + interrupts = ; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c10: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a88000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, + <&gpi_dma1 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c10_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi10: spi@a88000 { + compatible = "qcom,geni-spi"; + reg = <0 0xa88000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, + <&gpi_dma1 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi10_default>; + interrupts = ; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c11: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a8c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, + <&gpi_dma1 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c11_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi11: spi@a8c000 { + compatible = "qcom,geni-spi"; + reg = <0 0xa8c000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, + <&gpi_dma1 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi11_default>; + interrupts = ; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart2: serial@a90000 { + compatible = "qcom,geni-debug-uart"; + reg = <0x0 0x00a90000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + interrupts = ; + status = "disabled"; + }; + + i2c12: i2c@a90000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a90000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, + <&gpi_dma1 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c12_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi12: spi@a90000 { + compatible = "qcom,geni-spi"; + reg = <0 0xa90000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, + <&gpi_dma1 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi12_default>; + interrupts = ; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c16: i2c@94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0094000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>, + <&gpi_dma2 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c16_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi16: spi@a94000 { + compatible = "qcom,geni-spi"; + reg = <0 0xa94000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>, + <&gpi_dma2 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi16_default>; + interrupts = ; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + gpi_dma2: dma-controller@c00000 { + compatible = "qcom,sm8150-gpi-dma"; + reg = <0 0xc00000 0 0x60000>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + ; + dma-channels = <13>; + dma-channel-mask = <0xfa>; + iommus = <&apps_smmu 0x07b6 0x0>; + #dma-cells = <3>; + status = "disabled"; + }; + + qupv3_id_2: geniqup@cc0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x00cc0000 0x0 0x6000>; + + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; + iommus = <&apps_smmu 0x7a3 0x0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + i2c17: i2c@c80000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00c80000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>, + <&gpi_dma2 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c17_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi17: spi@c80000 { + compatible = "qcom,geni-spi"; + reg = <0 0xc80000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>, + <&gpi_dma2 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi17_default>; + interrupts = ; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c18: i2c@c84000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00c84000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>, + <&gpi_dma2 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c18_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi18: spi@c84000 { + compatible = "qcom,geni-spi"; + reg = <0 0xc84000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>, + <&gpi_dma2 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi18_default>; + interrupts = ; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c19: i2c@c88000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00c88000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>, + <&gpi_dma2 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c19_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi19: spi@c88000 { + compatible = "qcom,geni-spi"; + reg = <0 0xc88000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>, + <&gpi_dma2 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi19_default>; + interrupts = ; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c13: i2c@c8c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00c8c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>, + <&gpi_dma2 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c13_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi13: spi@c8c000 { + compatible = "qcom,geni-spi"; + reg = <0 0xc8c000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>, + <&gpi_dma2 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi13_default>; + interrupts = ; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c14: i2c@c90000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00c90000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>, + <&gpi_dma2 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c14_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi14: spi@c90000 { + compatible = "qcom,geni-spi"; + reg = <0 0xc90000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>, + <&gpi_dma2 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi14_default>; + interrupts = ; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c15: i2c@c94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00c94000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>, + <&gpi_dma2 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c15_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi15: spi@c94000 { + compatible = "qcom,geni-spi"; + reg = <0 0xc94000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>, + <&gpi_dma2 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi15_default>; + interrupts = ; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + config_noc: interconnect@1500000 { + compatible = "qcom,sm8150-config-noc"; + reg = <0 0x01500000 0 0x7400>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect@1620000 { + compatible = "qcom,sm8150-system-noc"; + reg = <0 0x01620000 0 0x19400>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mc_virt: interconnect@163a000 { + compatible = "qcom,sm8150-mc-virt"; + reg = <0 0x0163a000 0 0x1000>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre1_noc: interconnect@16e0000 { + compatible = "qcom,sm8150-aggre1-noc"; + reg = <0 0x016e0000 0 0xd080>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre2_noc: interconnect@1700000 { + compatible = "qcom,sm8150-aggre2-noc"; + reg = <0 0x01700000 0 0x20000>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + compute_noc: interconnect@1720000 { + compatible = "qcom,sm8150-compute-noc"; + reg = <0 0x01720000 0 0x7000>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mmss_noc: interconnect@1740000 { + compatible = "qcom,sm8150-mmss-noc"; + reg = <0 0x01740000 0 0x1c100>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system-cache-controller@9200000 { + compatible = "qcom,sm8150-llcc"; + reg = <0 0x09200000 0 0x200000>, <0 0x09600000 0 0x50000>; + reg-names = "llcc_base", "llcc_broadcast_base"; + interrupts = ; + }; + + pcie0: pci@1c00000 { + compatible = "qcom,pcie-sm8150", "snps,dw-pcie"; + reg = <0 0x01c00000 0 0x3000>, + <0 0x60000000 0 0xf1d>, + <0 0x60000f20 0 0xa8>, + <0 0x60001000 0 0x1000>, + <0 0x60100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; + + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "tbu"; + + iommus = <&apps_smmu 0x1d80 0x3f>; + iommu-map = <0x0 &apps_smmu 0x1d80 0x1>, + <0x100 &apps_smmu 0x1d81 0x1>; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_0_GDSC>; + + phys = <&pcie0_lane>; + phy-names = "pciephy"; + + perst-gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>; + enable-gpio = <&tlmm 37 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_default_state>; + + status = "disabled"; + }; + + pcie0_phy: phy@1c06000 { + compatible = "qcom,sm8150-qmp-gen3x1-pcie-phy"; + reg = <0 0x01c06000 0 0x1c0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_CLKREF_CLK>, + <&gcc GCC_PCIE0_PHY_REFGEN_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "refgen"; + + resets = <&gcc GCC_PCIE_0_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE0_PHY_REFGEN_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie0_lane: phy@1c06200 { + reg = <0 0x1c06200 0 0x170>, /* tx */ + <0 0x1c06400 0 0x200>, /* rx */ + <0 0x1c06800 0 0x1f0>, /* pcs */ + <0 0x1c06c00 0 0xf4>; /* "pcs_lane" same as pcs_misc? */ + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "pipe0"; + + #phy-cells = <0>; + clock-output-names = "pcie_0_pipe_clk"; + }; + }; + + pcie1: pci@1c08000 { + compatible = "qcom,pcie-sm8150", "snps,dw-pcie"; + reg = <0 0x01c08000 0 0x3000>, + <0 0x40000000 0 0xf1d>, + <0 0x40000f20 0 0xa8>, + <0 0x40001000 0 0x1000>, + <0 0x40100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + device_type = "pci"; + linux,pci-domain = <1>; + bus-range = <0x00 0xff>; + num-lanes = <2>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; + + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, + <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "tbu"; + + assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; + assigned-clock-rates = <19200000>; + + iommus = <&apps_smmu 0x1e00 0x3f>; + iommu-map = <0x0 &apps_smmu 0x1e00 0x1>, + <0x100 &apps_smmu 0x1e01 0x1>; + + resets = <&gcc GCC_PCIE_1_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_1_GDSC>; + + phys = <&pcie1_lane>; + phy-names = "pciephy"; + + perst-gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>; + enable-gpio = <&tlmm 104 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_default_state>; + + status = "disabled"; + }; + + pcie1_phy: phy@1c0e000 { + compatible = "qcom,sm8150-qmp-gen3x2-pcie-phy"; + reg = <0 0x01c0e000 0 0x1c0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_CLKREF_CLK>, + <&gcc GCC_PCIE1_PHY_REFGEN_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "refgen"; + + resets = <&gcc GCC_PCIE_1_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE1_PHY_REFGEN_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie1_lane: phy@1c0e200 { + reg = <0 0x1c0e200 0 0x170>, /* tx0 */ + <0 0x1c0e400 0 0x200>, /* rx0 */ + <0 0x1c0ea00 0 0x1f0>, /* pcs */ + <0 0x1c0e600 0 0x170>, /* tx1 */ + <0 0x1c0e800 0 0x200>, /* rx1 */ + <0 0x1c0ee00 0 0xf4>; /* "pcs_com" same as pcs_misc? */ + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; + clock-names = "pipe0"; + + #phy-cells = <0>; + clock-output-names = "pcie_1_pipe_clk"; + }; + }; + + ufs_mem_hc: ufshc@1d84000 { + compatible = "qcom,sm8150-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0 0x01d84000 0 0x2500>, + <0 0x01d90000 0 0x8000>; + reg-names = "std", "ice"; + interrupts = ; + phys = <&ufs_mem_phy_lanes>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + iommus = <&apps_smmu 0x300 0>; + + clock-names = + "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk", + "ice_core_clk"; + clocks = + <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>, + <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; + freq-table-hz = + <37500000 300000000>, + <0 0>, + <0 0>, + <37500000 300000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>, + <0 300000000>; + + status = "disabled"; + }; + + ufs_mem_phy: phy@1d87000 { + compatible = "qcom,sm8150-qmp-ufs-phy"; + reg = <0 0x01d87000 0 0x1c0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clock-names = "ref", + "ref_aux"; + clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + + power-domains = <&gcc UFS_PHY_GDSC>; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + status = "disabled"; + + ufs_mem_phy_lanes: phy@1d87400 { + reg = <0 0x01d87400 0 0x16c>, + <0 0x01d87600 0 0x200>, + <0 0x01d87c00 0 0x200>, + <0 0x01d87800 0 0x16c>, + <0 0x01d87a00 0 0x200>; + #phy-cells = <0>; + }; + }; + + ipa_virt: interconnect@1e00000 { + compatible = "qcom,sm8150-ipa-virt"; + reg = <0 0x01e00000 0 0x1000>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x01f40000 0x0 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr_regs_1: syscon@1f60000 { + compatible = "qcom,sm8150-tcsr", "syscon"; + reg = <0x0 0x01f60000 0x0 0x20000>; + }; + + remoteproc_slpi: remoteproc@2400000 { + compatible = "qcom,sm8150-slpi-pas"; + reg = <0x0 0x02400000 0x0 0x4040>; + + interrupts-extended = <&intc GIC_SPI 494 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd 3>, + <&rpmhpd 2>; + power-domain-names = "lcx", "lmx"; + + memory-region = <&slpi_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&slpi_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = ; + label = "dsps"; + qcom,remote-pid = <3>; + mboxes = <&apss_shared 24>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "sdsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x05a1 0x0>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x05a2 0x0>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x05a3 0x0>; + /* note: shared-cb = <4> in downstream */ + }; + }; + }; + }; + + gpu: gpu@2c00000 { + /* + * note: the amd,imageon compatible makes it possible + * to use the drm/msm driver without the display node, + * make sure to remove it when display node is added + */ + compatible = "qcom,adreno-640.1", + "qcom,adreno", + "amd,imageon"; + + reg = <0 0x02c00000 0 0x40000>; + reg-names = "kgsl_3d0_reg_memory"; + + interrupts = ; + + iommus = <&adreno_smmu 0 0x401>; + + operating-points-v2 = <&gpu_opp_table>; + + qcom,gmu = <&gmu>; + + status = "disabled"; + + zap-shader { + memory-region = <&gpu_mem>; + }; + + /* note: downstream checks gpu binning for 675 Mhz */ + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-675000000 { + opp-hz = /bits/ 64 <675000000>; + opp-level = ; + }; + + opp-585000000 { + opp-hz = /bits/ 64 <585000000>; + opp-level = ; + }; + + opp-499200000 { + opp-hz = /bits/ 64 <499200000>; + opp-level = ; + }; + + opp-427000000 { + opp-hz = /bits/ 64 <427000000>; + opp-level = ; + }; + + opp-345000000 { + opp-hz = /bits/ 64 <345000000>; + opp-level = ; + }; + + opp-257000000 { + opp-hz = /bits/ 64 <257000000>; + opp-level = ; + }; + }; + }; + + gmu: gmu@2c6a000 { + compatible = "qcom,adreno-gmu-640.1", "qcom,adreno-gmu"; + + reg = <0 0x02c6a000 0 0x30000>, + <0 0x0b290000 0 0x10000>, + <0 0x0b490000 0 0x10000>; + reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq"; + + interrupts = , + ; + interrupt-names = "hfi", "gmu"; + + clocks = <&gpucc GPU_CC_AHB_CLK>, + <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_CXO_CLK>, + <&gcc GCC_DDRSS_GPU_AXI_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>; + clock-names = "ahb", "gmu", "cxo", "axi", "memnoc"; + + power-domains = <&gpucc GPU_CX_GDSC>, + <&gpucc GPU_GX_GDSC>; + power-domain-names = "cx", "gx"; + + iommus = <&adreno_smmu 5 0x400>; + + operating-points-v2 = <&gmu_opp_table>; + + status = "disabled"; + + gmu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-level = ; + }; + }; + }; + + gpucc: clock-controller@2c90000 { + compatible = "qcom,sm8150-gpucc"; + reg = <0 0x02c90000 0 0x9000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + clock-names = "bi_tcxo", + "gcc_gpu_gpll0_clk_src", + "gcc_gpu_gpll0_div_clk_src"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + adreno_smmu: iommu@2ca0000 { + compatible = "qcom,sm8150-smmu-500", "arm,mmu-500"; + reg = <0 0x02ca0000 0 0x10000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + interrupts = , + , + , + , + , + , + , + , + ; + clocks = <&gpucc GPU_CC_AHB_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>; + clock-names = "ahb", "bus", "iface"; + + power-domains = <&gpucc GPU_CX_GDSC>; + }; + + tlmm: pinctrl@3100000 { + compatible = "qcom,sm8150-pinctrl"; + reg = <0x0 0x03100000 0x0 0x300000>, + <0x0 0x03500000 0x0 0x300000>, + <0x0 0x03900000 0x0 0x300000>, + <0x0 0x03D00000 0x0 0x300000>; + reg-names = "west", "east", "north", "south"; + interrupts = ; + gpio-ranges = <&tlmm 0 0 176>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + wakeup-parent = <&pdc>; + + qup_i2c0_default: qup-i2c0-default { + mux { + pins = "gpio0", "gpio1"; + function = "qup0"; + }; + + config { + pins = "gpio0", "gpio1"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_spi0_default: qup-spi0-default { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "qup0"; + drive-strength = <6>; + bias-disable; + }; + + qup_i2c1_default: qup-i2c1-default { + mux { + pins = "gpio114", "gpio115"; + function = "qup1"; + }; + + config { + pins = "gpio114", "gpio115"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_spi1_default: qup-spi1-default { + pins = "gpio114", "gpio115", "gpio116", "gpio117"; + function = "qup1"; + drive-strength = <6>; + bias-disable; + }; + + qup_i2c2_default: qup-i2c2-default { + mux { + pins = "gpio126", "gpio127"; + function = "qup2"; + }; + + config { + pins = "gpio126", "gpio127"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_spi2_default: qup-spi2-default { + pins = "gpio126", "gpio127", "gpio128", "gpio129"; + function = "qup2"; + drive-strength = <6>; + bias-disable; + }; + + qup_i2c3_default: qup-i2c3-default { + mux { + pins = "gpio144", "gpio145"; + function = "qup3"; + }; + + config { + pins = "gpio144", "gpio145"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_spi3_default: qup-spi3-default { + pins = "gpio144", "gpio145", "gpio146", "gpio147"; + function = "qup3"; + drive-strength = <6>; + bias-disable; + }; + + qup_i2c4_default: qup-i2c4-default { + mux { + pins = "gpio51", "gpio52"; + function = "qup4"; + }; + + config { + pins = "gpio51", "gpio52"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_spi4_default: qup-spi4-default { + pins = "gpio51", "gpio52", "gpio53", "gpio54"; + function = "qup4"; + drive-strength = <6>; + bias-disable; + }; + + qup_i2c5_default: qup-i2c5-default { + mux { + pins = "gpio121", "gpio122"; + function = "qup5"; + }; + + config { + pins = "gpio121", "gpio122"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_spi5_default: qup-spi5-default { + pins = "gpio119", "gpio120", "gpio121", "gpio122"; + function = "qup5"; + drive-strength = <6>; + bias-disable; + }; + + qup_i2c6_default: qup-i2c6-default { + mux { + pins = "gpio6", "gpio7"; + function = "qup6"; + }; + + config { + pins = "gpio6", "gpio7"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_spi6_default: qup-spi6_default { + pins = "gpio4", "gpio5", "gpio6", "gpio7"; + function = "qup6"; + drive-strength = <6>; + bias-disable; + }; + + qup_i2c7_default: qup-i2c7-default { + mux { + pins = "gpio98", "gpio99"; + function = "qup7"; + }; + + config { + pins = "gpio98", "gpio99"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_spi7_default: qup-spi7_default { + pins = "gpio98", "gpio99", "gpio100", "gpio101"; + function = "qup7"; + drive-strength = <6>; + bias-disable; + }; + + qup_i2c8_default: qup-i2c8-default { + mux { + pins = "gpio88", "gpio89"; + function = "qup8"; + }; + + config { + pins = "gpio88", "gpio89"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_spi8_default: qup-spi8-default { + pins = "gpio88", "gpio89", "gpio90", "gpio91"; + function = "qup8"; + drive-strength = <6>; + bias-disable; + }; + + qup_i2c9_default: qup-i2c9-default { + mux { + pins = "gpio39", "gpio40"; + function = "qup9"; + }; + + config { + pins = "gpio39", "gpio40"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_spi9_default: qup-spi9-default { + pins = "gpio39", "gpio40", "gpio41", "gpio42"; + function = "qup9"; + drive-strength = <6>; + bias-disable; + }; + + qup_i2c10_default: qup-i2c10-default { + mux { + pins = "gpio9", "gpio10"; + function = "qup10"; + }; + + config { + pins = "gpio9", "gpio10"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_spi10_default: qup-spi10-default { + pins = "gpio9", "gpio10", "gpio11", "gpio12"; + function = "qup10"; + drive-strength = <6>; + bias-disable; + }; + + qup_i2c11_default: qup-i2c11-default { + mux { + pins = "gpio94", "gpio95"; + function = "qup11"; + }; + + config { + pins = "gpio94", "gpio95"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_spi11_default: qup-spi11-default { + pins = "gpio92", "gpio93", "gpio94", "gpio95"; + function = "qup11"; + drive-strength = <6>; + bias-disable; + }; + + qup_i2c12_default: qup-i2c12-default { + mux { + pins = "gpio83", "gpio84"; + function = "qup12"; + }; + + config { + pins = "gpio83", "gpio84"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_spi12_default: qup-spi12-default { + pins = "gpio83", "gpio84", "gpio85", "gpio86"; + function = "qup12"; + drive-strength = <6>; + bias-disable; + }; + + qup_i2c13_default: qup-i2c13-default { + mux { + pins = "gpio43", "gpio44"; + function = "qup13"; + }; + + config { + pins = "gpio43", "gpio44"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_spi13_default: qup-spi13-default { + pins = "gpio43", "gpio44", "gpio45", "gpio46"; + function = "qup13"; + drive-strength = <6>; + bias-disable; + }; + + qup_i2c14_default: qup-i2c14-default { + mux { + pins = "gpio47", "gpio48"; + function = "qup14"; + }; + + config { + pins = "gpio47", "gpio48"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_spi14_default: qup-spi14-default { + pins = "gpio47", "gpio48", "gpio49", "gpio50"; + function = "qup14"; + drive-strength = <6>; + bias-disable; + }; + + qup_i2c15_default: qup-i2c15-default { + mux { + pins = "gpio27", "gpio28"; + function = "qup15"; + }; + + config { + pins = "gpio27", "gpio28"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_spi15_default: qup-spi15-default { + pins = "gpio27", "gpio28", "gpio29", "gpio30"; + function = "qup15"; + drive-strength = <6>; + bias-disable; + }; + + qup_i2c16_default: qup-i2c16-default { + mux { + pins = "gpio86", "gpio85"; + function = "qup16"; + }; + + config { + pins = "gpio86", "gpio85"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_spi16_default: qup-spi16-default { + pins = "gpio83", "gpio84", "gpio85", "gpio86"; + function = "qup16"; + drive-strength = <6>; + bias-disable; + }; + + qup_i2c17_default: qup-i2c17-default { + mux { + pins = "gpio55", "gpio56"; + function = "qup17"; + }; + + config { + pins = "gpio55", "gpio56"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_spi17_default: qup-spi17-default { + pins = "gpio55", "gpio56", "gpio57", "gpio58"; + function = "qup17"; + drive-strength = <6>; + bias-disable; + }; + + qup_i2c18_default: qup-i2c18-default { + mux { + pins = "gpio23", "gpio24"; + function = "qup18"; + }; + + config { + pins = "gpio23", "gpio24"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_spi18_default: qup-spi18-default { + pins = "gpio23", "gpio24", "gpio25", "gpio26"; + function = "qup18"; + drive-strength = <6>; + bias-disable; + }; + + qup_i2c19_default: qup-i2c19-default { + mux { + pins = "gpio57", "gpio58"; + function = "qup19"; + }; + + config { + pins = "gpio57", "gpio58"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_spi19_default: qup-spi19-default { + pins = "gpio55", "gpio56", "gpio57", "gpio58"; + function = "qup19"; + drive-strength = <6>; + bias-disable; + }; + + pcie0_default_state: pcie0-default { + perst { + pins = "gpio35"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq { + pins = "gpio36"; + function = "pci_e0"; + drive-strength = <2>; + bias-pull-up; + }; + + wake { + pins = "gpio37"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie1_default_state: pcie1-default { + perst { + pins = "gpio102"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq { + pins = "gpio103"; + function = "pci_e1"; + drive-strength = <2>; + bias-pull-up; + }; + + wake { + pins = "gpio104"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + }; + + remoteproc_mpss: remoteproc@4080000 { + compatible = "qcom,sm8150-mpss-pas"; + reg = <0x0 0x04080000 0x0 0x4040>; + + interrupts-extended = <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd 7>, + <&rpmhpd 0>; + power-domain-names = "cx", "mss"; + + memory-region = <&mpss_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = ; + label = "modem"; + qcom,remote-pid = <1>; + mboxes = <&apss_shared 12>; + }; + }; + + stm@6002000 { + compatible = "arm,coresight-stm", "arm,primecell"; + reg = <0 0x06002000 0 0x1000>, + <0 0x16280000 0 0x180000>; + reg-names = "stm-base", "stm-stimulus-base"; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + stm_out: endpoint { + remote-endpoint = <&funnel0_in7>; + }; + }; + }; + }; + + funnel@6041000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06041000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel0_out: endpoint { + remote-endpoint = <&merge_funnel_in0>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@7 { + reg = <7>; + funnel0_in7: endpoint { + remote-endpoint = <&stm_out>; + }; + }; + }; + }; + + funnel@6042000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06042000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel1_out: endpoint { + remote-endpoint = <&merge_funnel_in1>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@4 { + reg = <4>; + funnel1_in4: endpoint { + remote-endpoint = <&swao_replicator_out>; + }; + }; + }; + }; + + funnel@6043000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06043000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel2_out: endpoint { + remote-endpoint = <&merge_funnel_in2>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + reg = <2>; + funnel2_in2: endpoint { + remote-endpoint = <&apss_merge_funnel_out>; + }; + }; + }; + }; + + funnel@6045000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06045000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + merge_funnel_out: endpoint { + remote-endpoint = <&etf_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + merge_funnel_in0: endpoint { + remote-endpoint = <&funnel0_out>; + }; + }; + + port@1 { + reg = <1>; + merge_funnel_in1: endpoint { + remote-endpoint = <&funnel1_out>; + }; + }; + + port@2 { + reg = <2>; + merge_funnel_in2: endpoint { + remote-endpoint = <&funnel2_out>; + }; + }; + }; + }; + + replicator@6046000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0 0x06046000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + replicator_out0: endpoint { + remote-endpoint = <&etr_in>; + }; + }; + + port@1 { + reg = <1>; + replicator_out1: endpoint { + remote-endpoint = <&replicator1_in>; + }; + }; + }; + + in-ports { + port { + replicator_in0: endpoint { + remote-endpoint = <&etf_out>; + }; + }; + }; + }; + + etf@6047000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x06047000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + etf_out: endpoint { + remote-endpoint = <&replicator_in0>; + }; + }; + }; + + in-ports { + port { + etf_in: endpoint { + remote-endpoint = <&merge_funnel_out>; + }; + }; + }; + }; + + etr@6048000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x06048000 0 0x1000>; + iommus = <&apps_smmu 0x05e0 0x0>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,scatter-gather; + + in-ports { + port { + etr_in: endpoint { + remote-endpoint = <&replicator_out0>; + }; + }; + }; + }; + + replicator@604a000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0 0x0604a000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + replicator1_out: endpoint { + remote-endpoint = <&swao_funnel_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + replicator1_in: endpoint { + remote-endpoint = <&replicator_out1>; + }; + }; + }; + }; + + funnel@6b08000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06b08000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + swao_funnel_out: endpoint { + remote-endpoint = <&swao_etf_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@6 { + reg = <6>; + swao_funnel_in: endpoint { + remote-endpoint = <&replicator1_out>; + }; + }; + }; + }; + + etf@6b09000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x06b09000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + swao_etf_out: endpoint { + remote-endpoint = <&swao_replicator_in>; + }; + }; + }; + + in-ports { + port { + swao_etf_in: endpoint { + remote-endpoint = <&swao_funnel_out>; + }; + }; + }; + }; + + replicator@6b0a000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0 0x06b0a000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + qcom,replicator-loses-context; + + out-ports { + port { + swao_replicator_out: endpoint { + remote-endpoint = <&funnel1_in4>; + }; + }; + }; + + in-ports { + port { + swao_replicator_in: endpoint { + remote-endpoint = <&swao_etf_out>; + }; + }; + }; + }; + + etm@7040000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07040000 0 0x1000>; + + cpu = <&CPU0>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = <&apss_funnel_in0>; + }; + }; + }; + }; + + etm@7140000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07140000 0 0x1000>; + + cpu = <&CPU1>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = <&apss_funnel_in1>; + }; + }; + }; + }; + + etm@7240000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07240000 0 0x1000>; + + cpu = <&CPU2>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = <&apss_funnel_in2>; + }; + }; + }; + }; + + etm@7340000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07340000 0 0x1000>; + + cpu = <&CPU3>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = <&apss_funnel_in3>; + }; + }; + }; + }; + + etm@7440000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07440000 0 0x1000>; + + cpu = <&CPU4>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm4_out: endpoint { + remote-endpoint = <&apss_funnel_in4>; + }; + }; + }; + }; + + etm@7540000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07540000 0 0x1000>; + + cpu = <&CPU5>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm5_out: endpoint { + remote-endpoint = <&apss_funnel_in5>; + }; + }; + }; + }; + + etm@7640000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07640000 0 0x1000>; + + cpu = <&CPU6>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm6_out: endpoint { + remote-endpoint = <&apss_funnel_in6>; + }; + }; + }; + }; + + etm@7740000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07740000 0 0x1000>; + + cpu = <&CPU7>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm7_out: endpoint { + remote-endpoint = <&apss_funnel_in7>; + }; + }; + }; + }; + + funnel@7800000 { /* APSS Funnel */ + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x07800000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + apss_funnel_out: endpoint { + remote-endpoint = <&apss_merge_funnel_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + apss_funnel_in0: endpoint { + remote-endpoint = <&etm0_out>; + }; + }; + + port@1 { + reg = <1>; + apss_funnel_in1: endpoint { + remote-endpoint = <&etm1_out>; + }; + }; + + port@2 { + reg = <2>; + apss_funnel_in2: endpoint { + remote-endpoint = <&etm2_out>; + }; + }; + + port@3 { + reg = <3>; + apss_funnel_in3: endpoint { + remote-endpoint = <&etm3_out>; + }; + }; + + port@4 { + reg = <4>; + apss_funnel_in4: endpoint { + remote-endpoint = <&etm4_out>; + }; + }; + + port@5 { + reg = <5>; + apss_funnel_in5: endpoint { + remote-endpoint = <&etm5_out>; + }; + }; + + port@6 { + reg = <6>; + apss_funnel_in6: endpoint { + remote-endpoint = <&etm6_out>; + }; + }; + + port@7 { + reg = <7>; + apss_funnel_in7: endpoint { + remote-endpoint = <&etm7_out>; + }; + }; + }; + }; + + funnel@7810000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x07810000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + apss_merge_funnel_out: endpoint { + remote-endpoint = <&funnel2_in2>; + }; + }; + }; + + in-ports { + port { + apss_merge_funnel_in: endpoint { + remote-endpoint = <&apss_funnel_out>; + }; + }; + }; + }; + + remoteproc_cdsp: remoteproc@8300000 { + compatible = "qcom,sm8150-cdsp-pas"; + reg = <0x0 0x08300000 0x0 0x4040>; + + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd 7>; + + memory-region = <&cdsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&cdsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = ; + label = "cdsp"; + qcom,remote-pid = <5>; + mboxes = <&apss_shared 4>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "cdsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x1001 0x0460>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x1002 0x0460>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1003 0x0460>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1004 0x0460>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x1005 0x0460>; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x1006 0x0460>; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x1007 0x0460>; + }; + + compute-cb@8 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <8>; + iommus = <&apps_smmu 0x1008 0x0460>; + }; + + /* note: secure cb9 in downstream */ + }; + }; + }; + + usb_1_hsphy: phy@88e2000 { + compatible = "qcom,sm8150-usb-hs-phy", + "qcom,usb-snps-hs-7nm-phy"; + reg = <0 0x088e2000 0 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + }; + + usb_2_hsphy: phy@88e3000 { + compatible = "qcom,sm8150-usb-hs-phy", + "qcom,usb-snps-hs-7nm-phy"; + reg = <0 0x088e3000 0 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; + }; + + usb_1_qmpphy: phy@88e9000 { + compatible = "qcom,sm8150-qmp-usb3-phy"; + reg = <0 0x088e9000 0 0x18c>, + <0 0x088e8000 0 0x10>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; + clock-names = "aux", "ref_clk_src", "ref", "com_aux"; + + resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, + <&gcc GCC_USB3_PHY_PRIM_BCR>; + reset-names = "phy", "common"; + + usb_1_ssphy: phy@88e9200 { + reg = <0 0x088e9200 0 0x200>, + <0 0x088e9400 0 0x200>, + <0 0x088e9c00 0 0x218>, + <0 0x088e9600 0 0x200>, + <0 0x088e9800 0 0x200>, + <0 0x088e9a00 0 0x100>; + #clock-cells = <0>; + #phy-cells = <0>; + clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_phy_pipe_clk_src"; + }; + }; + + usb_2_qmpphy: phy@88eb000 { + compatible = "qcom,sm8150-qmp-usb3-uni-phy"; + reg = <0 0x088eb000 0 0x200>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_SEC_CLKREF_CLK>, + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>; + clock-names = "aux", "ref_clk_src", "ref", "com_aux"; + + resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>, + <&gcc GCC_USB3_PHY_SEC_BCR>; + reset-names = "phy", "common"; + + usb_2_ssphy: phy@88eb200 { + reg = <0 0x088eb200 0 0x200>, + <0 0x088eb400 0 0x200>, + <0 0x088eb800 0 0x800>, + <0 0x088eb600 0 0x200>; + #clock-cells = <0>; + #phy-cells = <0>; + clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_uni_phy_pipe_clk_src"; + }; + }; + + sdhc_2: mmc@8804000 { + compatible = "qcom,sm8150-sdhci", "qcom,sdhci-msm-v5"; + reg = <0 0x08804000 0 0x1000>; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "core", "xo"; + iommus = <&apps_smmu 0x6a0 0x0>; + qcom,dll-config = <0x0007642c>; + qcom,ddr-config = <0x80040868>; + power-domains = <&rpmhpd 0>; + operating-points-v2 = <&sdhc2_opp_table>; + + status = "disabled"; + + sdhc2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + dc_noc: interconnect@9160000 { + compatible = "qcom,sm8150-dc-noc"; + reg = <0 0x09160000 0 0x3200>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + gem_noc: interconnect@9680000 { + compatible = "qcom,sm8150-gem-noc"; + reg = <0 0x09680000 0 0x3e200>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + usb_1: usb@a6f8800 { + compatible = "qcom,sm8150-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + dma-ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB3_SEC_CLKREF_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "xo"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 8 IRQ_TYPE_EDGE_BOTH>, + <&pdc 9 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "hs_phy_irq", "ss_phy_irq", + "dm_hs_phy_irq", "dp_hs_phy_irq"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + usb_1_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xcd00>; + interrupts = ; + iommus = <&apps_smmu 0x140 0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + usb_2: usb@a8f8800 { + compatible = "qcom,sm8150-dwc3", "qcom,dwc3"; + reg = <0 0x0a8f8800 0 0x400>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + dma-ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_SLEEP_CLK>, + <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB3_SEC_CLKREF_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "xo"; + + assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 10 IRQ_TYPE_EDGE_BOTH>, + <&pdc 11 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "hs_phy_irq", "ss_phy_irq", + "dm_hs_phy_irq", "dp_hs_phy_irq"; + + power-domains = <&gcc USB30_SEC_GDSC>; + + resets = <&gcc GCC_USB30_SEC_BCR>; + + usb_2_dwc3: usb@a800000 { + compatible = "snps,dwc3"; + reg = <0 0x0a800000 0 0xcd00>; + interrupts = ; + iommus = <&apps_smmu 0x160 0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_2_hsphy>, <&usb_2_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + camnoc_virt: interconnect@ac00000 { + compatible = "qcom,sm8150-camnoc-virt"; + reg = <0 0x0ac00000 0 0x1000>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,sm8150-pdc", "qcom,pdc"; + reg = <0 0x0b220000 0 0x30000>; + qcom,pdc-ranges = <0 480 94>, <94 609 31>, + <125 63 1>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + aoss_qmp: power-controller@c300000 { + compatible = "qcom,sm8150-aoss-qmp", "qcom,aoss-qmp"; + reg = <0x0 0x0c300000 0x0 0x400>; + interrupts = ; + mboxes = <&apss_shared 0>; + + #clock-cells = <0>; + }; + + sram@c3f0000 { + compatible = "qcom,rpmh-stats"; + reg = <0 0x0c3f0000 0 0x400>; + }; + + tsens0: thermal-sensor@c263000 { + compatible = "qcom,sm8150-tsens", "qcom,tsens-v2"; + reg = <0 0x0c263000 0 0x1ff>, /* TM */ + <0 0x0c222000 0 0x1ff>; /* SROT */ + #qcom,sensors = <16>; + interrupts = , + ; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c265000 { + compatible = "qcom,sm8150-tsens", "qcom,tsens-v2"; + reg = <0 0x0c265000 0 0x1ff>, /* TM */ + <0 0x0c223000 0 0x1ff>; /* SROT */ + #qcom,sensors = <8>; + interrupts = , + ; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + spmi_bus: spmi@c440000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0 0x0c440000 0x0 0x0001100>, + <0x0 0x0c600000 0x0 0x2000000>, + <0x0 0x0e600000 0x0 0x0100000>, + <0x0 0x0e700000 0x0 0x00a0000>, + <0x0 0x0c40a000 0x0 0x0026000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = ; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + cell-index = <0>; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,sm8150-smmu-500", "arm,mmu-500"; + reg = <0 0x15000000 0 0x100000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + }; + + remoteproc_adsp: remoteproc@17300000 { + compatible = "qcom,sm8150-adsp-pas"; + reg = <0x0 0x17300000 0x0 0x4040>; + + interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd 7>; + + memory-region = <&adsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = ; + label = "lpass"; + qcom,remote-pid = <2>; + mboxes = <&apss_shared 8>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "adsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1b23 0x0>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1b24 0x0>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x1b25 0x0>; + }; + }; + }; + }; + + intc: interrupt-controller@17a00000 { + compatible = "arm,gic-v3"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */ + <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */ + interrupts = ; + }; + + apss_shared: mailbox@17c00000 { + compatible = "qcom,sm8150-apss-shared"; + reg = <0x0 0x17c00000 0x0 0x1000>; + #mbox-cells = <1>; + }; + + watchdog@17c10000 { + compatible = "qcom,apss-wdt-sm8150", "qcom,kpss-wdt"; + reg = <0 0x17c10000 0 0x1000>; + clocks = <&sleep_clk>; + interrupts = ; + }; + + timer@17c20000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0x20000000>; + compatible = "arm,armv7-timer-mem"; + reg = <0x0 0x17c20000 0x0 0x1000>; + clock-frequency = <19200000>; + + frame@17c21000{ + frame-number = <0>; + interrupts = , + ; + reg = <0x17c21000 0x1000>, + <0x17c22000 0x1000>; + }; + + frame@17c23000 { + frame-number = <1>; + interrupts = ; + reg = <0x17c23000 0x1000>; + status = "disabled"; + }; + + frame@17c25000 { + frame-number = <2>; + interrupts = ; + reg = <0x17c25000 0x1000>; + status = "disabled"; + }; + + frame@17c27000 { + frame-number = <3>; + interrupts = ; + reg = <0x17c26000 0x1000>; + status = "disabled"; + }; + + frame@17c29000 { + frame-number = <4>; + interrupts = ; + reg = <0x17c29000 0x1000>; + status = "disabled"; + }; + + frame@17c2b000 { + frame-number = <5>; + interrupts = ; + reg = <0x17c2b000 0x1000>; + status = "disabled"; + }; + + frame@17c2d000 { + frame-number = <6>; + interrupts = ; + reg = <0x17c2d000 0x1000>; + status = "disabled"; + }; + }; + + apps_rsc: rsc@18200000 { + label = "apps_rsc"; + compatible = "qcom,rpmh-rsc"; + reg = <0x0 0x18200000 0x0 0x10000>, + <0x0 0x18210000 0x0 0x10000>, + <0x0 0x18220000 0x0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = , + , + ; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = , + , + , + ; + + rpmhcc: clock-controller { + compatible = "qcom,sm8150-rpmh-clk"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board>; + }; + + rpmhpd: power-controller { + compatible = "qcom,sm8150-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = ; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = ; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = ; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = ; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = ; + }; + + rpmhpd_opp_svs_l2: opp6 { + opp-level = <224>; + }; + + rpmhpd_opp_nom: opp7 { + opp-level = ; + }; + + rpmhpd_opp_nom_l1: opp8 { + opp-level = ; + }; + + rpmhpd_opp_nom_l2: opp9 { + opp-level = ; + }; + + rpmhpd_opp_turbo: opp10 { + opp-level = ; + }; + + rpmhpd_opp_turbo_l1: opp11 { + opp-level = ; + }; + }; + }; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + }; + + osm_l3: interconnect@18321000 { + compatible = "qcom,sm8150-osm-l3"; + reg = <0 0x18321000 0 0x1400>; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + + #interconnect-cells = <1>; + }; + + cpufreq_hw: cpufreq@18323000 { + compatible = "qcom,cpufreq-hw"; + reg = <0 0x18323000 0 0x1400>, <0 0x18325800 0 0x1400>, + <0 0x18327800 0 0x1400>; + reg-names = "freq-domain0", "freq-domain1", + "freq-domain2"; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + + #freq-domain-cells = <1>; + }; + + lmh_cluster1: lmh@18350800 { + compatible = "qcom,sm8150-lmh"; + reg = <0 0x18350800 0 0x400>; + interrupts = ; + cpus = <&CPU4>; + qcom,lmh-temp-arm-millicelsius = <60000>; + qcom,lmh-temp-low-millicelsius = <84500>; + qcom,lmh-temp-high-millicelsius = <85000>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + lmh_cluster0: lmh@18358800 { + compatible = "qcom,sm8150-lmh"; + reg = <0 0x18358800 0 0x400>; + interrupts = ; + cpus = <&CPU0>; + qcom,lmh-temp-arm-millicelsius = <60000>; + qcom,lmh-temp-low-millicelsius = <84500>; + qcom,lmh-temp-high-millicelsius = <85000>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + wifi: wifi@18800000 { + compatible = "qcom,wcn3990-wifi"; + reg = <0 0x18800000 0 0x800000>; + reg-names = "membase"; + memory-region = <&wlan_mem>; + clock-names = "cxo_ref_clk_pin", "qdss"; + clocks = <&rpmhcc RPMH_RF_CLK2>, <&aoss_qmp>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + ; + iommus = <&apps_smmu 0x0640 0x1>; + status = "disabled"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; + + thermal-zones { + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 1>; + + trips { + cpu0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu0_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu0_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 2>; + + trips { + cpu1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu1_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu1_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 3>; + + trips { + cpu2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu2_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu2_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 4>; + + trips { + cpu3_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu3_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu3_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu4-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 7>; + + trips { + cpu4_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_top_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu4_top_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu4_top_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu5-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 8>; + + trips { + cpu5_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_top_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu5_top_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu5_top_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu6-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 9>; + + trips { + cpu6_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_top_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu6_top_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu6_top_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu7-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 10>; + + trips { + cpu7_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_top_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu7_top_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu7_top_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu4-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 11>; + + trips { + cpu4_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_bottom_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu4_bottom_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu4_bottom_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu5-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 12>; + + trips { + cpu5_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_bottom_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu5_bottom_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu5_bottom_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu6-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 13>; + + trips { + cpu6_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_bottom_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu6_bottom_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu6_bottom_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu7-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 14>; + + trips { + cpu7_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_bottom_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu7_bottom_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu7_bottom_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + aoss0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 0>; + + trips { + aoss0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + cluster0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 5>; + + trips { + cluster0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + cluster0_crit: cluster0_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cluster1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 6>; + + trips { + cluster1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + cluster1_crit: cluster1_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + gpu-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 15>; + + trips { + gpu1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + aoss1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 0>; + + trips { + aoss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + wlan-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 1>; + + trips { + wlan_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 2>; + + trips { + video_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + mem-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 3>; + + trips { + mem_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + q6-hvx-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 4>; + + trips { + q6_hvx_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + camera-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 5>; + + trips { + camera_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + compute-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 6>; + + trips { + compute_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + modem-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 7>; + + trips { + modem_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + npu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 8>; + + trips { + npu_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + modem-vec-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 9>; + + trips { + modem_vec_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + modem-scl-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 10>; + + trips { + modem_scl_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + gpu-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 11>; + + trips { + gpu2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8250-hdk.dts b/arch/arm64/boot/dts/qcom/sm8250-hdk.dts new file mode 100644 index 000000000..632e98193 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8250-hdk.dts @@ -0,0 +1,459 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include +#include "sm8250.dtsi" +#include "pm8150.dtsi" +#include "pm8150b.dtsi" +#include "pm8150l.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SM8250 HDK"; + compatible = "qcom,sm8250-hdk", "qcom,sm8250"; + + aliases { + serial0 = &uart12; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + vreg_s4a_1p8: pm8150-s4 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; + + vreg_s6c_0p88: smpc6-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_s6c_0p88"; + + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-always-on; + vin-supply = <&vph_pwr>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-vol-up { + label = "Volume Up"; + linux,code = ; + gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&apps_rsc { + pm8150-rpmh-regulators { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-l1-l8-l11-supply = <&vreg_s6c_0p88>; + vdd-l2-l10-supply = <&vreg_bob>; + vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>; + vdd-l6-l9-supply = <&vreg_s8c_1p3>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>; + vdd-l13-l16-l17-supply = <&vreg_bob>; + + vreg_s5a_1p9: smps5 { + regulator-name = "vreg_s5a_1p9"; + regulator-min-microvolt = <1824000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = ; + }; + + vreg_s6a_0p95: smps6 { + regulator-name = "vreg_s6a_0p95"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1128000>; + regulator-initial-mode = ; + }; + + vreg_l2a_3p1: ldo2 { + regulator-name = "vreg_l2a_3p1"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + }; + + vreg_l3a_0p9: ldo3 { + regulator-name = "vreg_l3a_0p9"; + regulator-min-microvolt = <928000>; + regulator-max-microvolt = <932000>; + regulator-initial-mode = ; + }; + + vreg_l5a_0p88: ldo5 { + regulator-name = "vreg_l5a_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + }; + + vreg_l6a_1p2: ldo6 { + regulator-name = "vreg_l6a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l7a_1p7: ldo7 { + regulator-name = "vreg_l7a_1p7"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l9a_1p2: ldo9 { + regulator-name = "vreg_l9a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l10a_1p8: ldo10 { + regulator-name = "vreg_l10a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l12a_1p8: ldo12 { + regulator-name = "vreg_l12a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l13a_ts_3p0: ldo13 { + regulator-name = "vreg_l13a_ts_3p0"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l14a_1p8: ldo14 { + regulator-name = "vreg_l14a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1880000>; + regulator-initial-mode = ; + }; + + vreg_l15a_1p8: ldo15 { + regulator-name = "vreg_l15a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l16a_3p3: ldo16 { + regulator-name = "vreg_l16a_3p3"; + regulator-min-microvolt = <3024000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = ; + }; + + vreg_l17a_2p96: ldo17 { + regulator-name = "vreg_l17a_2p96"; + regulator-min-microvolt = <2496000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l18a_0p92: ldo18 { + regulator-name = "vreg_l18a_0p92"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = ; + }; + }; + + pm8150l-rpmh-regulators { + compatible = "qcom,pm8150l-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-l1-l8-supply = <&vreg_s4a_1p8>; + vdd-l2-l3-supply = <&vreg_s8c_1p3>; + vdd-l4-l5-l6-supply = <&vreg_bob>; + vdd-l7-l11-supply = <&vreg_bob>; + vdd-l9-l10-supply = <&vreg_bob>; + vdd-bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-name = "vreg_bob"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = ; + }; + + vreg_s8c_1p3: smps8 { + regulator-name = "vreg_s8c_1p3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1400000>; + regulator-initial-mode = ; + }; + + vreg_l1c_1p8: ldo1 { + regulator-name = "vreg_l1c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l2c_1p2: ldo2 { + regulator-name = "vreg_l2c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = ; + }; + + vreg_l3c_0p8: ldo3 { + regulator-name = "vreg_l3c_0p8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l4c_1p8: ldo4 { + regulator-name = "vreg_l4c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = ; + }; + + vreg_l5c_1p8: ldo5 { + regulator-name = "vreg_l5c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = ; + }; + + vreg_l6c_2p96: ldo6 { + regulator-name = "vreg_l6c_2p96"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l7c_cam_vcm0_2p85: ldo7 { + regulator-name = "vreg_l7c_cam_vcm0_2p85"; + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = ; + }; + + vreg_l8c_1p8: ldo8 { + regulator-name = "vreg_l8c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l9c_2p96: ldo9 { + regulator-name = "vreg_l9c_2p96"; + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l10c_3p0: ldo10 { + regulator-name = "vreg_l10c_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + }; + + vreg_l11c_3p3: ldo11 { + regulator-name = "vreg_l11c_3p3"; + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + }; + }; + + pm8009-rpmh-regulators { + compatible = "qcom,pm8009-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vreg_bob>; + vdd-l2-supply = <&vreg_s8c_1p3>; + vdd-l5-l6-supply = <&vreg_bob>; + vdd-l7-supply = <&vreg_s4a_1p8>; + + vreg_l1f_cam_dvdd1_1p1: ldo1 { + regulator-name = "vreg_l1f_cam_dvdd1_1p1"; + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1104000>; + regulator-initial-mode = ; + }; + + vreg_l2f_cam_dvdd0_1p2: ldo2 { + regulator-name = "vreg_l2f_cam_dvdd0_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l3f_cam_dvdd2_1p05: ldo3 { + regulator-name = "vreg_l3f_cam_dvdd2_1p05"; + regulator-min-microvolt = <1056000>; + regulator-max-microvolt = <1056000>; + regulator-initial-mode = ; + }; + + vreg_l5f_cam_avdd0_2p85: ldo5 { + regulator-name = "vreg_l5f_cam_avdd0_2p85"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = ; + }; + + vreg_l6f_cam_avdd1_2p8: ldo6 { + regulator-name = "vreg_l6f_cam_avdd1_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = ; + }; + + vreg_l7f_1p8: ldo7 { + regulator-name = "vreg_l7f_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + }; +}; + +&gmu { + status = "okay"; +}; + +&gpu { + status = "okay"; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + status = "okay"; + + linux,code = ; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <28 4>, <40 4>; +}; + +&uart12 { + status = "okay"; +}; + +&ufs_mem_hc { + status = "okay"; + + vcc-supply = <&vreg_l17a_2p96>; + vcc-max-microamp = <800000>; + vccq-supply = <&vreg_l6a_1p2>; + vccq-max-microamp = <800000>; + vccq2-supply = <&vreg_s4a_1p8>; + vccq2-max-microamp = <800000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l5a_0p88>; + vdda-pll-supply = <&vreg_l9a_1p2>; +}; + +&usb_1_hsphy { + status = "okay"; + vdda-pll-supply = <&vreg_l5a_0p88>; + vdda33-supply = <&vreg_l2a_3p1>; + vdda18-supply = <&vreg_l12a_1p8>; +}; + +&usb_2_hsphy { + status = "okay"; + vdda-pll-supply = <&vreg_l5a_0p88>; + vdda33-supply = <&vreg_l2a_3p1>; + vdda18-supply = <&vreg_l12a_1p8>; +}; + +&usb_1_qmpphy { + status = "okay"; + vdda-phy-supply = <&vreg_l9a_1p2>; + vdda-pll-supply = <&vreg_l18a_0p92>; +}; + +&usb_2_qmpphy { + status = "okay"; + vdda-phy-supply = <&vreg_l9a_1p2>; + vdda-pll-supply = <&vreg_l18a_0p92>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; +}; + +&venus { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts new file mode 100644 index 000000000..a05fe468e --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts @@ -0,0 +1,904 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include +#include +#include +#include +#include "sm8250.dtsi" +#include "pm8150.dtsi" +#include "pm8150b.dtsi" +#include "pm8150l.dtsi" +#include "pm8009.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SM8250 MTP"; + compatible = "qcom,sm8250-mtp", "qcom,sm8250"; + + aliases { + serial0 = &uart12; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + thermal-zones { + camera-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150l_adc_tm 0>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + conn-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150b_adc_tm 0>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + mmw-pa1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150_adc_tm 2>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + mmw-pa2-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150l_adc_tm 2>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + skin-msm-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150l_adc_tm 1>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + skin-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150_adc_tm 1>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + xo-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150_adc_tm 0>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + vreg_s4a_1p8: pm8150-s4 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; + + vreg_s6c_0p88: smpc6-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_s6c_0p88"; + + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-always-on; + vin-supply = <&vph_pwr>; + }; +}; + +&adsp { + status = "okay"; + firmware-name = "qcom/sm8250/adsp.mbn"; +}; + +&apps_rsc { + pm8150-rpmh-regulators { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-l1-l8-l11-supply = <&vreg_s6c_0p88>; + vdd-l2-l10-supply = <&vreg_bob>; + vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>; + vdd-l6-l9-supply = <&vreg_s8c_1p3>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>; + vdd-l13-l16-l17-supply = <&vreg_bob>; + + vreg_s5a_1p9: smps5 { + regulator-name = "vreg_s5a_1p9"; + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = ; + }; + + vreg_s6a_0p95: smps6 { + regulator-name = "vreg_s6a_0p95"; + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <1128000>; + regulator-initial-mode = ; + }; + + vreg_l2a_3p1: ldo2 { + regulator-name = "vreg_l2a_3p1"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + }; + + vreg_l3a_0p9: ldo3 { + regulator-name = "vreg_l3a_0p9"; + regulator-min-microvolt = <928000>; + regulator-max-microvolt = <932000>; + regulator-initial-mode = ; + }; + + vreg_l5a_0p875: ldo5 { + regulator-name = "vreg_l5a_0p875"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + }; + + vreg_l6a_1p2: ldo6 { + regulator-name = "vreg_l6a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l7a_1p7: ldo7 { + regulator-name = "vreg_l7a_1p7"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l9a_1p2: ldo9 { + regulator-name = "vreg_l9a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l10a_1p8: ldo10 { + regulator-name = "vreg_l10a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l12a_1p8: ldo12 { + regulator-name = "vreg_l12a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l13a_ts_3p0: ldo13 { + regulator-name = "vreg_l13a_ts_3p0"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l14a_1p8: ldo14 { + regulator-name = "vreg_l14a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1880000>; + regulator-initial-mode = ; + }; + + vreg_l15a_11ad_io_1p8: ldo15 { + regulator-name = "vreg_l15a_11ad_io_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l16a_2p7: ldo16 { + regulator-name = "vreg_l16a_2p7"; + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l17a_3p0: ldo17 { + regulator-name = "vreg_l17a_3p0"; + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l18a_0p9: ldo18 { + regulator-name = "vreg_l18a_0p9"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + }; + }; + + pm8150l-rpmh-regulators { + compatible = "qcom,pm8150l-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-l1-l8-supply = <&vreg_s4a_1p8>; + vdd-l2-l3-supply = <&vreg_s8c_1p3>; + vdd-l4-l5-l6-supply = <&vreg_bob>; + vdd-l7-l11-supply = <&vreg_bob>; + vdd-l9-l10-supply = <&vreg_bob>; + vdd-bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-name = "vreg_bob"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <4000000>; + regulator-initial-mode = ; + }; + + vreg_s8c_1p3: smps8 { + regulator-name = "vreg_s8c_1p3"; + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + regulator-initial-mode = ; + }; + + vreg_l1c_1p8: ldo1 { + regulator-name = "vreg_l1c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l2c_1p2: ldo2 { + regulator-name = "vreg_l2c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l3c_0p92: ldo3 { + regulator-name = "vreg_l3c_0p92"; + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = ; + }; + + vreg_l4c_1p7: ldo4 { + regulator-name = "vreg_l4c_1p7"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = ; + }; + + vreg_l5c_1p8: ldo5 { + regulator-name = "vreg_l5c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = ; + }; + + vreg_l6c_2p9: ldo6 { + regulator-name = "vreg_l6c_2p9"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l7c_cam_vcm0_2p85: ldo7 { + regulator-name = "vreg_l7c_cam_vcm0_2p85"; + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = ; + }; + + vreg_l8c_1p8: ldo8 { + regulator-name = "vreg_l8c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l9c_2p9: ldo9 { + regulator-name = "vreg_l9c_2p9"; + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l10c_3p0: ldo10 { + regulator-name = "vreg_l10c_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = ; + }; + + vreg_l11c_3p3: ldo11 { + regulator-name = "vreg_l11c_3p3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + }; + }; + + pm8009-rpmh-regulators { + compatible = "qcom,pm8009-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vreg_bob>; + vdd-l2-supply = <&vreg_s8c_1p3>; + vdd-l5-l6-supply = <&vreg_bob>; + vdd-l7-supply = <&vreg_s4a_1p8>; + + vreg_l1f_cam_dvdd1_1p1: ldo1 { + regulator-name = "vreg_l1f_cam_dvdd1_1p1"; + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1104000>; + regulator-initial-mode = ; + }; + + vreg_l2f_cam_dvdd0_1p2: ldo2 { + regulator-name = "vreg_l2f_cam_dvdd0_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l3f_cam_dvdd2_1p05: ldo3 { + regulator-name = "vreg_l3f_cam_dvdd2_1p05"; + regulator-min-microvolt = <1056000>; + regulator-max-microvolt = <1056000>; + regulator-initial-mode = ; + }; + + vreg_l5f_cam_avdd0_2p85: ldo5 { + regulator-name = "vreg_l5f_cam_avdd0_2p85"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = ; + }; + + vreg_l6f_cam_avdd1_2p85: ldo6 { + regulator-name = "vreg_l6f_cam_avdd1_2p85"; + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <2856000>; + regulator-initial-mode = ; + }; + + vreg_l7f_1p8: ldo7 { + regulator-name = "vreg_l7f_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + }; +}; + +&cdsp { + status = "okay"; + firmware-name = "qcom/sm8250/cdsp.mbn"; +}; + +&gmu { + status = "okay"; +}; + +&gpu { + status = "okay"; + + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sm8250/a650_zap.mbn"; + }; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <1000000>; + + /* NQ NFC chip @28 */ +}; + +&i2c13 { + status = "okay"; + + /* st,stmfts @ 49 */ +}; + +&i2c15 { + status = "okay"; + + /* smb1390 @ 10 */ + /* rtc6226 @ 64 */ +}; + +&pm8150_adc { + xo-therm@4c { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + skin-therm@4d { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + pa-therm1@4e { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&pm8150_adc_tm { + status = "okay"; + + xo-therm@0 { + reg = <0>; + io-channels = <&pm8150_adc ADC5_XO_THERM_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + skin-therm@1 { + reg = <1>; + io-channels = <&pm8150_adc ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + pa-therm1@2 { + reg = <2>; + io-channels = <&pm8150_adc ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pm8150b_adc { + conn-therm@4f { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&pm8150b_adc_tm { + status = "okay"; + + conn-therm@0 { + reg = <0>; + io-channels = <&pm8150b_adc ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pm8150l_adc_tm { + status = "okay"; + + camera-flash-therm@0 { + reg = <0>; + io-channels = <&pm8150l_adc ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + skin-msm-therm@1 { + reg = <1>; + io-channels = <&pm8150l_adc ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + pa-therm2@2 { + reg = <2>; + io-channels = <&pm8150l_adc ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pm8150l_adc { + camera-flash-therm@4d { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + skin-msm-therm@4e { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + pa-therm2@4f { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&qupv3_id_2 { + status = "okay"; +}; + +&rxmacro { + status = "okay"; +}; + +&slpi { + status = "okay"; + firmware-name = "qcom/sm8250/slpi.mbn"; +}; + +&soc { + wcd938x: codec { + compatible = "qcom,wcd9380-codec"; + #sound-dai-cells = <1>; + reset-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>; + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-rxtx-supply = <&vreg_s4a_1p8>; + vdd-io-supply = <&vreg_s4a_1p8>; + vdd-mic-bias-supply = <&vreg_bob>; + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + }; +}; + +&sound { + compatible = "qcom,sm8250-sndcard"; + model = "SM8250-MTP-WCD9380-WSA8810-VA-DMIC"; + audio-routing = + "SpkrLeft IN", "WSA_SPK1 OUT", + "SpkrRight IN", "WSA_SPK2 OUT", + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC1", "MIC BIAS1", + "AMIC2", "MIC BIAS2", + "AMIC3", "MIC BIAS3", + "AMIC4", "MIC BIAS3", + "AMIC5", "MIC BIAS4", + "TX SWR_ADC0", "ADC1_OUTPUT", + "TX SWR_ADC1", "ADC2_OUTPUT", + "TX SWR_ADC2", "ADC3_OUTPUT", + "TX SWR_ADC3", "ADC4_OUTPUT", + "TX SWR_DMIC0", "DMIC1_OUTPUT", + "TX SWR_DMIC1", "DMIC2_OUTPUT", + "TX SWR_DMIC2", "DMIC3_OUTPUT", + "TX SWR_DMIC3", "DMIC4_OUTPUT", + "TX SWR_DMIC4", "DMIC5_OUTPUT", + "TX SWR_DMIC5", "DMIC6_OUTPUT", + "TX SWR_DMIC6", "DMIC7_OUTPUT", + "TX SWR_DMIC7", "DMIC8_OUTPUT"; + + mm1-dai-link { + link-name = "MultiMedia1"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + mm2-dai-link { + link-name = "MultiMedia2"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + mm3-dai-link { + link-name = "MultiMedia3"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + wcd-playback-dai-link { + link-name = "WCD Playback"; + cpu { + sound-dai = <&q6afedai RX_CODEC_DMA_RX_0>; + }; + codec { + sound-dai = <&wcd938x 0>, <&swr1 0>, <&rxmacro 0>; + }; + platform { + sound-dai = <&q6routing>; + }; + }; + + wcd-capture-dai-link { + link-name = "WCD Capture"; + cpu { + sound-dai = <&q6afedai TX_CODEC_DMA_TX_3>; + }; + + codec { + sound-dai = <&wcd938x 1>, <&swr2 0>, <&txmacro 0>; + }; + platform { + sound-dai = <&q6routing>; + }; + }; + + wsa-dai-link { + link-name = "WSA Playback"; + cpu { + sound-dai = <&q6afedai WSA_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&wsamacro 0>; + }; + platform { + sound-dai = <&q6routing>; + }; + }; + + va-dai-link { + link-name = "VA Capture"; + cpu { + sound-dai = <&q6afedai VA_CODEC_DMA_TX_0>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&vamacro 0>; + }; + }; +}; + +&swr0 { + left_spkr: wsa8810-right@0,3{ + compatible = "sdw10217211000"; + reg = <0 3>; + powerdown-gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>; + #thermal-sensor-cells = <0>; + sound-name-prefix = "SpkrLeft"; + #sound-dai-cells = <0>; + }; + + right_spkr: wsa8810-left@0,4{ + compatible = "sdw10217211000"; + reg = <0 4>; + powerdown-gpios = <&tlmm 127 GPIO_ACTIVE_HIGH>; + #thermal-sensor-cells = <0>; + sound-name-prefix = "SpkrRight"; + #sound-dai-cells = <0>; + }; +}; + +&swr1 { + status = "okay"; + + wcd_rx: wcd9380-rx@0,4 { + compatible = "sdw20217010d00"; + reg = <0 4>; + qcom,rx-port-mapping = <1 2 3 4 5>; + }; +}; + +&swr2 { + status = "okay"; + + wcd_tx: wcd9380-tx@0,3 { + compatible = "sdw20217010d00"; + reg = <0 3>; + qcom,tx-port-mapping = <2 3 4 5>; + }; +}; + +&tlmm { + gpio-reserved-ranges = <28 4>, <40 4>; + + wcd938x_reset_default: wcd938x_reset_default { + mux { + pins = "gpio32"; + function = "gpio"; + }; + + config { + pins = "gpio32"; + drive-strength = <16>; + output-high; + }; + }; + + wcd938x_reset_sleep: wcd938x_reset_sleep { + mux { + pins = "gpio32"; + function = "gpio"; + }; + + config { + pins = "gpio32"; + drive-strength = <16>; + bias-disable; + output-low; + }; + }; +}; + +&txmacro { + status = "okay"; +}; + +&uart12 { + status = "okay"; +}; + +&ufs_mem_hc { + status = "okay"; + + vcc-supply = <&vreg_l17a_3p0>; + vcc-max-microamp = <750000>; + vccq-supply = <&vreg_l6a_1p2>; + vccq-max-microamp = <700000>; + vccq2-supply = <&vreg_s4a_1p8>; + vccq2-max-microamp = <750000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l5a_0p875>; + vdda-pll-supply = <&vreg_l9a_1p2>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdda-pll-supply = <&vreg_l5a_0p875>; + vdda18-supply = <&vreg_l12a_1p8>; + vdda33-supply = <&vreg_l2a_3p1>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l9a_1p2>; + vdda-pll-supply = <&vreg_l18a_0p9>; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; +}; + +&usb_2_hsphy { + status = "okay"; + + vdda-pll-supply = <&vreg_l5a_0p875>; + vdda18-supply = <&vreg_l12a_1p8>; + vdda33-supply = <&vreg_l2a_3p1>; +}; + +&usb_2_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l9a_1p2>; + vdda-pll-supply = <&vreg_l18a_0p9>; +}; + +&venus { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts new file mode 100644 index 000000000..62590c6bd --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts @@ -0,0 +1,249 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio + */ + +/dts-v1/; + +#include "sm8250-sony-xperia-edo.dtsi" + +/ { + model = "Sony Xperia 1 II"; + compatible = "sony,pdx203-generic", "qcom,sm8250"; + chassis-type = "handset"; +}; + +/delete-node/ &vreg_l7f_1p8; + +&pm8009_gpios { + gpio-line-names = "NC", /* GPIO_1 */ + "CAM_PWR_LD_EN", + "WIDEC_PWR_EN", + "NC"; +}; + +&pm8150_gpios { + gpio-line-names = "VOL_DOWN_N", /* GPIO_1 */ + "OPTION_2", + "NC", + "PM_SLP_CLK_IN", + "OPTION_1", + "NC", + "NC", + "SP_ARI_PWR_ALARM", + "NC", + "NC"; /* GPIO_10 */ +}; + +&pm8150b_gpios { + gpio-line-names = "SNAPSHOT_N", /* GPIO_1 */ + "FOCUS_N", + "NC", + "NC", + "RF_LCD_ID_EN", + "NC", + "NC", + "LCD_ID", + "NC", + "WLC_EN_N", /* GPIO_10 */ + "NC", + "RF_ID"; +}; + +&pm8150l_gpios { + gpio-line-names = "NC", /* GPIO_1 */ + "PM3003A_EN", + "NC", + "NC", + "NC", + "AUX2_THERM", + "BB_HP_EN", + "FP_LDO_EN", + "PMX_RESET_N", + "AUX3_THERM", /* GPIO_10 */ + "DTV_PWR_EN", + "PM3003A_MODE"; +}; + +&tlmm { + gpio-line-names = "AP_CTI_IN", /* GPIO_0 */ + "MDM2AP_ERR_FATAL", + "AP_CTI_OUT", + "MDM2AP_STATUS", + "NFC_I2C_SDA", + "NFC_I2C_SCL", + "NFC_EN", + "NFC_CLK_REQ", + "NFC_ESE_PWR_REQ", + "DVDT_WRT_DET_AND", + "SPK_AMP_RESET_N", /* GPIO_10 */ + "SPK_AMP_INT_N", + "APPS_I2C_1_SDA", + "APPS_I2C_1_SCL", + "NC", + "TX_GTR_THRES_IN", + "HST_BT_UART_CTS", + "HST_BT_UART_RFR", + "HST_BT_UART_TX", + "HST_BT_UART_RX", + "HST_WLAN_EN", /* GPIO_20 */ + "HST_BT_EN", + "RGBC_IR_PWR_EN", + "FP_INT_N", + "NC", + "NC", + "NC", + "NC", + "NFC_ESE_SPI_MISO", + "NFC_ESE_SPI_MOSI", + "NFC_ESE_SPI_SCLK", /* GPIO_30 */ + "NFC_ESE_SPI_CS_N", + "WCD_RST_N", + "NC", + "SDM_DEBUG_UART_TX", + "SDM_DEBUG_UART_RX", + "TS_I2C_SDA", + "TS_I2C_SCL", + "TS_INT_N", + "FP_SPI_MISO", /* GPIO_40 */ + "FP_SPI_MOSI", + "FP_SPI_SCLK", + "FP_SPI_CS_N", + "APPS_I2C_0_SDA", + "APPS_I2C_0_SCL", + "DISP_ERR_FG", + "UIM2_DETECT_EN", + "NC", + "NC", + "NC", /* GPIO_50 */ + "NC", + "MDM_UART_CTS", + "MDM_UART_RFR", + "MDM_UART_TX", + "MDM_UART_RX", + "AP2MDM_STATUS", + "AP2MDM_ERR_FATAL", + "MDM_IPC_HS_UART_TX", + "MDM_IPC_HS_UART_RX", + "NC", /* GPIO_60 */ + "NC", + "NC", + "NC", + "NC", + "USB_CC_DIR", + "DISP_VSYNC", + "NC", + "NC", + "CAM_PWR_B_CS", + "NC", /* GPIO_70 */ + "CAM_PWR_A_CS", + "SBU_SW_SEL", + "SBU_SW_OE", + "FP_RESET_N", + "FP_RESET_N", + "DISP_RESET_N", + "DEBUG_GPIO0", + "TRAY_DET", + "CAM2_RST_N", + "PCIE0_RST_N", + "PCIE0_CLK_REQ_N", /* GPIO_80 */ + "PCIE0_WAKE_N", + "DVDT_ENABLE", + "DVDT_WRT_DET_OR", + "NC", + "PCIE2_RST_N", + "PCIE2_CLK_REQ_N", + "PCIE2_WAKE_N", + "MDM_VFR_IRQ0", + "MDM_VFR_IRQ1", + "SW_SERVICE", /* GPIO_90 */ + "CAM_SOF", + "CAM1_RST_N", + "CAM0_RST_N", + "CAM0_MCLK", + "CAM1_MCLK", + "CAM2_MCLK", + "CAM3_MCLK", + "CAM4_MCLK", + "TOF_RST_N", + "NC", /* GPIO_100 */ + "CCI0_I2C_SDA", + "CCI0_I2C_SCL", + "CCI1_I2C_SDA", + "CCI1_I2C_SCL_", + "CCI2_I2C_SDA", + "CCI2_I2C_SCL", + "CCI3_I2C_SDA", + "CCI3_I2C_SCL", + "CAM3_RST_N", + "NFC_DWL_REQ", /* GPIO_110 */ + "NFC_IRQ", + "XVS", + "NC", + "RF_ID_EXTENSION", + "SPK_AMP_I2C_SDA", + "SPK_AMP_I2C_SCL", + "NC", + "NC", + "WLC_I2C_SDA", + "WLC_I2C_SCL", /* GPIO_120 */ + "ACC_COVER_OPEN", + "ALS_PROX_INT_N", + "ACCEL_INT", + "WLAN_SW_CTRL", + "CAMSENSOR_I2C_SDA", + "CAMSENSOR_I2C_SCL", + "UDON_SWITCH_SEL", + "WDOG_DISABLE", + "BAROMETER_INT", + "NC", /* GPIO_130 */ + "NC", + "FORCED_USB_BOOT", + "NC", + "NC", + "WLC_INT_N", + "NC", + "NC", + "RGBC_IR_INT", + "NC", + "NC", /* GPIO_140 */ + "NC", + "BT_SLIMBUS_CLK", + "BT_SLIMBUS_DATA", + "HW_ID_0", + "HW_ID_1", + "WCD_SWR_TX_CLK", + "WCD_SWR_TX_DATA0", + "WCD_SWR_TX_DATA1", + "WCD_SWR_RX_CLK", + "WCD_SWR_RX_DATA0", /* GPIO_150 */ + "WCD_SWR_RX_DATA1", + "SDM_DMIC_CLK1", + "SDM_DMIC_DATA1", + "SDM_DMIC_CLK2", + "SDM_DMIC_DATA2", + "SPK_AMP_I2S_CLK", + "SPK_AMP_I2S_WS", + "SPK_AMP_I2S_ASP_DIN", + "SPK_AMP_I2S_ASP_DOUT", + "COMPASS_I2C_SDA", /* GPIO_160 */ + "COMPASS_I2C_SCL", + "NC", + "NC", + "SSC_SPI_1_MISO", + "SSC_SPI_1_MOSI", + "SSC_SPI_1_CLK", + "SSC_SPI_1_CS_N", + "NC", + "NC", + "SSC_SENSOR_I2C_SDA", /* GPIO_170 */ + "SSC_SENSOR_I2C_SCL", + "NC", + "NC", + "NC", + "NC", + "HST_BLE_SNS_UART6_TX", + "HST_BLE_SNS_UART6_RX", + "HST_WLAN_UART_TX", + "HST_WLAN_UART_RX"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts new file mode 100644 index 000000000..0e50661c1 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts @@ -0,0 +1,279 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio + */ + +/dts-v1/; + +#include "sm8250-sony-xperia-edo.dtsi" + +/ { + model = "Sony Xperia 5 II"; + compatible = "sony,pdx206-generic", "qcom,sm8250"; + chassis-type = "handset"; +}; + +&framebuffer { + width = <1080>; + height = <2520>; + stride = <(1080 * 4)>; +}; + +&gpio_keys { + pinctrl-0 = <&focus_n &snapshot_n &vol_down_n &g_assist_n>; + + g-assist-key { + label = "Google Assistant Key"; + linux,code = ; + gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + gpio-key,wakeup; + }; +}; + +&pm8009_gpios { + gpio-line-names = "NC", /* GPIO_1 */ + "NC", + "WIDEC_PWR_EN", + "NC"; +}; + +&pm8150_gpios { + gpio-line-names = "VOL_DOWN_N", /* GPIO_1 */ + "OPTION_2", + "NC", + "PM_SLP_CLK_IN", + "OPTION_1", + "G_ASSIST_N", + "NC", + "SP_ARI_PWR_ALARM", + "NC", + "NC"; /* GPIO_10 */ + + g_assist_n: g-assist-n-state { + pins = "gpio6"; + function = "normal"; + power-source = <1>; + bias-pull-up; + input-enable; + }; +}; + +&pm8150b_gpios { + gpio-line-names = "SNAPSHOT_N", /* GPIO_1 */ + "FOCUS_N", + "NC", + "NC", + "RF_LCD_ID_EN", + "NC", + "NC", + "LCD_ID", + "NC", + "NC", /* GPIO_10 */ + "NC", + "RF_ID"; +}; + +&pm8150l_gpios { + gpio-line-names = "NC", /* GPIO_1 */ + "PM3003A_EN", + "NC", + "NC", + "NC", + "AUX2_THERM", + "BB_HP_EN", + "FP_LDO_EN", + "PMX_RESET_N", + "NC", /* GPIO_10 */ + "NC", + "PM3003A_MODE"; +}; + +&tlmm { + gpio-line-names = "AP_CTI_IN", /* GPIO_0 */ + "MDM2AP_ERR_FATAL", + "AP_CTI_OUT", + "MDM2AP_STATUS", + "NFC_I2C_SDA", + "NFC_I2C_SCL", + "NFC_EN", + "NFC_CLK_REQ", + "NFC_ESE_PWR_REQ", + "DVDT_WRT_DET_AND", + "SPK_AMP_RESET_N", /* GPIO_10 */ + "SPK_AMP_INT_N", + "APPS_I2C_1_SDA", + "APPS_I2C_1_SCL", + "NC", + "TX_GTR_THRES_IN", + "HST_BT_UART_CTS", + "HST_BT_UART_RFR", + "HST_BT_UART_TX", + "HST_BT_UART_RX", + "HST_WLAN_EN", /* GPIO_20 */ + "HST_BT_EN", + "RGBC_IR_PWR_EN", + "FP_INT_N", + "NC", + "NC", + "NC", + "NC", + "NFC_ESE_SPI_MISO", + "NFC_ESE_SPI_MOSI", + "NFC_ESE_SPI_SCLK", /* GPIO_30 */ + "NFC_ESE_SPI_CS_N", + "WCD_RST_N", + "NC", + "SDM_DEBUG_UART_TX", + "SDM_DEBUG_UART_RX", + "TS_I2C_SDA", + "TS_I2C_SCL", + "TS_INT_N", + "FP_SPI_MISO", /* GPIO_40 */ + "FP_SPI_MOSI", + "FP_SPI_SCLK", + "FP_SPI_CS_N", + "APPS_I2C_0_SDA", + "APPS_I2C_0_SCL", + "DISP_ERR_FG", + "UIM2_DETECT_EN", + "NC", + "NC", + "NC", /* GPIO_50 */ + "NC", + "MDM_UART_CTS", + "MDM_UART_RFR", + "MDM_UART_TX", + "MDM_UART_RX", + "AP2MDM_STATUS", + "AP2MDM_ERR_FATAL", + "MDM_IPC_HS_UART_TX", + "MDM_IPC_HS_UART_RX", + "NC", /* GPIO_60 */ + "NC", + "NC", + "NC", + "NC", + "USB_CC_DIR", + "DISP_VSYNC", + "NC", + "NC", + "CAM_PWR_B_CS", + "NC", /* GPIO_70 */ + "FRONTC_PWR_EN", + "SBU_SW_SEL", + "SBU_SW_OE", + "FP_RESET_N", + "FP_RESET_N", + "DISP_RESET_N", + "DEBUG_GPIO0", + "TRAY_DET", + "CAM2_RST_N", + "PCIE0_RST_N", + "PCIE0_CLK_REQ_N", /* GPIO_80 */ + "PCIE0_WAKE_N", + "DVDT_ENABLE", + "DVDT_WRT_DET_OR", + "NC", + "PCIE2_RST_N", + "PCIE2_CLK_REQ_N", + "PCIE2_WAKE_N", + "MDM_VFR_IRQ0", + "MDM_VFR_IRQ1", + "SW_SERVICE", /* GPIO_90 */ + "CAM_SOF", + "CAM1_RST_N", + "CAM0_RST_N", + "CAM0_MCLK", + "CAM1_MCLK", + "CAM2_MCLK", + "CAM3_MCLK", + "NC", + "NC", + "NC", /* GPIO_100 */ + "CCI0_I2C_SDA", + "CCI0_I2C_SCL", + "CCI1_I2C_SDA", + "CCI1_I2C_SCL_", + "CCI2_I2C_SDA", + "CCI2_I2C_SCL", + "CCI3_I2C_SDA", + "CCI3_I2C_SCL", + "CAM3_RST_N", + "NFC_DWL_REQ", /* GPIO_110 */ + "NFC_IRQ", + "XVS", + "NC", + "RF_ID_EXTENSION", + "SPK_AMP_I2C_SDA", + "SPK_AMP_I2C_SCL", + "NC", + "NC", + "NC", + "NC", + "ACC_COVER_OPEN", + "ALS_PROX_INT_N", + "ACCEL_INT", + "WLAN_SW_CTRL", + "CAMSENSOR_I2C_SDA", + "CAMSENSOR_I2C_SCL", + "UDON_SWITCH_SEL", + "WDOG_DISABLE", + "BAROMETER_INT", + "NC", /* GPIO_130 */ + "NC", + "FORCED_USB_BOOT", + "NC", + "NC", + "NC", + "NC", + "NC", + "RGBC_IR_INT", + "NC", + "NC", /* GPIO_140 */ + "NC", + "BT_SLIMBUS_CLK", + "BT_SLIMBUS_DATA", + "HW_ID_0", + "HW_ID_1", + "WCD_SWR_TX_CLK", + "WCD_SWR_TX_DATA0", + "WCD_SWR_TX_DATA1", + "WCD_SWR_RX_CLK", + "WCD_SWR_RX_DATA0", /* GPIO_150 */ + "WCD_SWR_RX_DATA1", + "SDM_DMIC_CLK1", + "SDM_DMIC_DATA1", + "SDM_DMIC_CLK2", + "SDM_DMIC_DATA2", + "SPK_AMP_I2S_CLK", + "SPK_AMP_I2S_WS", + "SPK_AMP_I2S_ASP_DIN", + "SPK_AMP_I2S_ASP_DOUT", + "COMPASS_I2C_SDA", /* GPIO_160 */ + "COMPASS_I2C_SCL", + "NC", + "NC", + "SSC_SPI_1_MISO", + "SSC_SPI_1_MOSI", + "SSC_SPI_1_CLK", + "SSC_SPI_1_CS_N", + "NC", + "NC", + "SSC_SENSOR_I2C_SDA", /* GPIO_170 */ + "SSC_SENSOR_I2C_SCL", + "NC", + "NC", + "NC", + "NC", + "HST_BLE_SNS_UART6_TX", + "HST_BLE_SNS_UART6_RX", + "HST_WLAN_UART_TX", + "HST_WLAN_UART_RX"; +}; + +&vreg_l2f_1p3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi new file mode 100644 index 000000000..3b306dfb9 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi @@ -0,0 +1,713 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio + */ + +#include +#include "sm8250.dtsi" +#include "pm8150.dtsi" +#include "pm8150b.dtsi" +#include "pm8150l.dtsi" +#include "pm8009.dtsi" + +/delete-node/ &adsp_mem; +/delete-node/ &spss_mem; +/delete-node/ &cdsp_secure_heap; + +/ { + qcom,msm-id = <356 0x20001>; /* SM8250 v2.1 */ + qcom,board-id = <0x10008 0>; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer: framebuffer@9c000000 { + compatible = "simple-framebuffer"; + reg = <0 0x9c000000 0 0x2300000>; + /* pdx203 BL initializes in 2.5k mode, not 4k */ + width = <1096>; + height = <2560>; + stride = <(1096 * 4)>; + format = "a8r8g8b8"; + /* + * That's a lot of clocks, but it's necessary due + * to unused clk cleanup & no panel driver yet.. + */ + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>; + power-domains = <&dispcc MDSS_GDSC>; + }; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&focus_n &snapshot_n &vol_down_n>; + pinctrl-names = "default"; + + key-camera-focus { + label = "Camera Focus"; + linux,code = ; + gpios = <&pm8150b_gpios 2 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + + key-camera-snapshot { + label = "Camera Snapshot"; + linux,code = ; + gpios = <&pm8150b_gpios 1 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + + key-vol-down { + label = "Volume Down"; + linux,code = ; + gpios = <&pm8150_gpios 1 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + gpio-key,wakeup; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + /* S6c is really ebi.lvl but it's there for supply map completeness sake. */ + vreg_s6c_0p88: smpc6-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_s6c_0p88"; + + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-always-on; + vin-supply = <&vph_pwr>; + }; + + reserved-memory { + adsp_mem: memory@8a100000 { + reg = <0x0 0x8a100000 0x0 0x2500000>; + no-map; + }; + + spss_mem: memory@8c600000 { + reg = <0x0 0x8c600000 0x0 0x100000>; + no-map; + }; + + cdsp_secure_heap: memory@8c700000 { + reg = <0x0 0x8c700000 0x0 0x4600000>; + no-map; + }; + + cont_splash_mem: memory@9c000000 { + reg = <0x0 0x9c000000 0x0 0x2300000>; + no-map; + }; + + ramoops@ffc00000 { + compatible = "ramoops"; + reg = <0x0 0xffc00000 0x0 0x100000>; + record-size = <0x1000>; + console-size = <0x40000>; + pmsg-size = <0x20000>; + ecc-size = <16>; + no-map; + }; + }; +}; + +&adsp { + status = "okay"; +}; + +&apps_rsc { + pm8150-rpmh-regulators { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-l1-l8-l11-supply = <&vreg_s6c_0p88>; + vdd-l2-l10-supply = <&vreg_bob>; + vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p6>; + vdd-l6-l9-supply = <&vreg_s8c_1p2>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>; + vdd-l13-l16-l17-supply = <&vreg_bob>; + + /* (S1+S2+S3) - cx.lvl (ARC) */ + + vreg_s4a_1p8: smps4 { + regulator-name = "vreg_s4a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1920000>; + regulator-initial-mode = ; + }; + + vreg_s5a_1p9: smps5 { + regulator-name = "vreg_s5a_1p9"; + regulator-min-microvolt = <1824000>; + regulator-max-microvolt = <2040000>; + regulator-initial-mode = ; + }; + + vreg_s6a_0p6: smps6 { + regulator-name = "vreg_s6a_0p6"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1128000>; + regulator-initial-mode = ; + }; + + vreg_l2a_3p1: ldo2 { + regulator-name = "vreg_l2a_3p1"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + }; + + vreg_l3a_0p9: ldo3 { + regulator-name = "vreg_l3a_0p9"; + regulator-min-microvolt = <928000>; + regulator-max-microvolt = <932000>; + regulator-initial-mode = ; + }; + + /* L4 - lmx.lvl (ARC) */ + + vreg_l5a_0p88: ldo5 { + regulator-name = "vreg_l5a_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + }; + + vreg_l6a_1p2: ldo6 { + regulator-name = "vreg_l6a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + /* L7 is unused. */ + + vreg_l9a_1p2: ldo9 { + regulator-name = "vreg_l9a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + /* L10 is unused, L11 - lcx.lvl (ARC) */ + + vreg_l12a_1p8: ldo12 { + regulator-name = "vreg_l12a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + /* L13 is unused. */ + + vreg_l14a_1p8: ldo14 { + regulator-name = "vreg_l14a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1880000>; + regulator-initial-mode = ; + }; + + /* L15 & L16 are unused. */ + + vreg_l17a_3p0: ldo17 { + regulator-name = "vreg_l17a_3p0"; + regulator-min-microvolt = <2496000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l18a_0p9: ldo18 { + regulator-name = "vreg_l18a_0p9"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = ; + }; + }; + + /* + * Remaining regulators that are not yet supported: + * OLEDB: 4925000-8100000 + * ab: 4600000-6100000 + * ibb: 800000-5400000 + */ + pm8150l-rpmh-regulators { + compatible = "qcom,pm8150l-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-l1-l8-supply = <&vreg_s4a_1p8>; + vdd-l2-l3-supply = <&vreg_s8c_1p2>; + vdd-l4-l5-l6-supply = <&vreg_bob>; + vdd-l7-l11-supply = <&vreg_bob>; + vdd-l9-l10-supply = <&vreg_bob>; + vdd-bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-name = "vreg_bob"; + regulator-min-microvolt = <3350000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = ; + }; + + /* + * S1-S6 are ARCs: + * (S1+S2) - gfx.lvl, + * S3 - mx.lvl, + * (S4+S5) - mmcx.lvl, + * S6 - ebi.lvl + */ + + vreg_s7c_0p35: smps7 { + regulator-name = "vreg_s7c_0p35"; + regulator-min-microvolt = <348000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = ; + }; + + vreg_s8c_1p2: smps8 { + regulator-name = "vreg_s8c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1400000>; + regulator-initial-mode = ; + }; + + vreg_l1c_1p8: ldo1 { + regulator-name = "vreg_l1c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + /* L2-4 are unused. */ + + vreg_l5c_1p8: ldo5 { + regulator-name = "vreg_l5c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = ; + }; + + vreg_l6c_2p9: ldo6 { + regulator-name = "vreg_l6c_2p9"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = + ; + }; + + vreg_l7c_2p85: ldo7 { + regulator-name = "vreg_l7c_2p85"; + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = ; + }; + + vreg_l8c_1p8: ldo8 { + regulator-name = "vreg_l8c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l9c_2p9: ldo9 { + regulator-name = "vreg_l9c_2p9"; + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = + ; + }; + + vreg_l10c_3p3: ldo10 { + regulator-name = "vreg_l10c_3p3"; + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3296000>; + regulator-initial-mode = ; + }; + + vreg_l11c_3p0: ldo11 { + regulator-name = "vreg_l11c_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = ; + }; + }; + + pm8009-rpmh-regulators { + compatible = "qcom,pm8009-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vreg_bob>; + vdd-l2-supply = <&vreg_s8c_1p2>; + vdd-l5-l6-supply = <&vreg_bob>; + vdd-l7-supply = <&vreg_s4a_1p8>; + + vreg_s1f_1p2: smps1 { + regulator-name = "vreg_s1f_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_s2f_0p5: smps2 { + regulator-name = "vreg_s2f_0p5"; + regulator-min-microvolt = <512000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = ; + }; + + /* L1 is unused. */ + + vreg_l2f_1p3: ldo2 { + regulator-name = "vreg_l2f_1p3"; + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = ; + }; + + /* L3 & L4 are unused. */ + + vreg_l5f_2p8: ldo5 { + regulator-name = "vreg_l5f_2p85"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = ; + }; + + vreg_l6f_2p8: ldo6 { + regulator-name = "vreg_l6f_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = ; + }; + + vreg_l7f_1p8: ldo7 { + regulator-name = "vreg_l7f_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + }; +}; + +&cdsp { + status = "okay"; +}; + +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&gpi_dma2 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + /* NXP PN553 NFC @ 28 */ +}; + +&i2c2 { + status = "okay"; + clock-frequency = <1000000>; + + cs35l41_l: cs35l41@40 { + compatible = "cirrus,cs35l41"; + reg = <0x40>; + interrupt-parent = <&tlmm>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>; + cirrus,boost-peak-milliamp = <4000>; + cirrus,boost-ind-nanohenry = <1000>; + cirrus,boost-cap-microfarad = <15>; + cirrus,asp-sdout-hiz = <3>; + cirrus,gpio2-src-select = <2>; + cirrus,gpio2-output-enable; + #sound-dai-cells = <1>; + }; + + cs35l41_r: cs35l41@41 { + compatible = "cirrus,cs35l41"; + reg = <0x41>; + interrupt-parent = <&tlmm>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>; + cirrus,boost-peak-milliamp = <4000>; + cirrus,boost-ind-nanohenry = <1000>; + cirrus,boost-cap-microfarad = <15>; + cirrus,asp-sdout-hiz = <3>; + cirrus,gpio2-src-select = <2>; + cirrus,gpio2-output-enable; + #sound-dai-cells = <1>; + }; +}; + +&i2c5 { + status = "okay"; + clock-frequency = <400000>; + + /* Dialog SLG51000 CMIC @ 75 */ +}; + +&i2c9 { + status = "okay"; + clock-frequency = <400000>; + + /* AMS TCS3490 RGB+IR color sensor @ 72 */ +}; + +&i2c13 { + status = "okay"; + clock-frequency = <400000>; + + touchscreen@48 { + compatible = "samsung,s6sy761"; + reg = <0x48>; + interrupt-parent = <&tlmm>; + interrupts = <39 0x2008>; + /* It's "vddio" downstream but it works anyway! */ + vdd-supply = <&vreg_l1c_1p8>; + avdd-supply = <&vreg_l10c_3p3>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_default>; + }; +}; + +&i2c15 { + status = "okay"; + clock-frequency = <400000>; + + /* Qcom SMB1390 @ 10 */ + /* Silicon Labs SI4704 FM Radio Receiver @ 11 */ + /* Qcom SMB1390_slave @ 18 */ + /* HALO HL6111R Qi charger @ 25 */ + /* Richwave RTC6226 FM Radio Receiver @ 64 */ +}; + +&pcie0 { + status = "okay"; +}; + +&pcie0_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l5a_0p88>; + vdda-pll-supply = <&vreg_l9a_1p2>; +}; + +&pcie2 { + status = "okay"; + + pinctrl-0 = <&pcie2_default_state &mdm2ap_default &ap2mdm_default>; +}; + +&pcie2_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l5a_0p88>; + vdda-pll-supply = <&vreg_l9a_1p2>; +}; + +&pm8150_gpios { + vol_down_n: vol-down-n-state { + pins = "gpio1"; + function = "normal"; + power-source = <0>; + bias-pull-up; + input-enable; + }; +}; + +&pm8150b_gpios { + snapshot_n: snapshot-n-state { + pins = "gpio1"; + function = "normal"; + power-source = <0>; + bias-pull-up; + input-enable; + }; + + focus_n: focus-n-state { + pins = "gpio2"; + function = "normal"; + power-source = <0>; + bias-pull-up; + input-enable; + }; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + status = "okay"; + + linux,code = ; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&qupv3_id_2 { + status = "okay"; +}; + +&sdhc_2 { + status = "okay"; + + cd-gpios = <&tlmm 77 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>; + pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_n>; + vmmc-supply = <&vreg_l9c_2p9>; + vqmmc-supply = <&vreg_l6c_2p9>; + bus-width = <4>; + no-sdio; + no-emmc; +}; + +&slpi { + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <40 4>, <52 4>; + + sdc2_default_state: sdc2-default { + clk { + pins = "sdc2_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd { + pins = "sdc2_cmd"; + drive-strength = <16>; + bias-pull-up; + }; + + data { + pins = "sdc2_data"; + drive-strength = <16>; + bias-pull-up; + }; + }; + + mdm2ap_default: mdm2ap-default { + pins = "gpio1", "gpio3"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + ts_int_default: ts-int-default { + pins = "gpio39"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + input-enable; + }; + + ap2mdm_default: ap2mdm-default { + pins = "gpio56", "gpio57"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + sdc2_card_det_n: sd-card-det-n { + pins = "gpio77"; + function = "gpio"; + bias-pull-up; + drive-strength = <2>; + }; +}; + +&uart12 { + status = "okay"; +}; + +/* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE WILL DIE! */ +&ufs_mem_hc { status = "disabled"; }; +&ufs_mem_phy { status = "disabled"; }; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdda-pll-supply = <&vreg_l5a_0p88>; + vdda18-supply = <&vreg_l12a_1p8>; + vdda33-supply = <&vreg_l2a_3p1>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l9a_1p2>; + vdda-pll-supply = <&vreg_l18a_0p9>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi new file mode 100644 index 000000000..3d02adbc0 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -0,0 +1,5795 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; + i2c9 = &i2c9; + i2c10 = &i2c10; + i2c11 = &i2c11; + i2c12 = &i2c12; + i2c13 = &i2c13; + i2c14 = &i2c14; + i2c15 = &i2c15; + i2c16 = &i2c16; + i2c17 = &i2c17; + i2c18 = &i2c18; + i2c19 = &i2c19; + spi0 = &spi0; + spi1 = &spi1; + spi2 = &spi2; + spi3 = &spi3; + spi4 = &spi4; + spi5 = &spi5; + spi6 = &spi6; + spi7 = &spi7; + spi8 = &spi8; + spi9 = &spi9; + spi10 = &spi10; + spi11 = &spi11; + spi12 = &spi12; + spi13 = &spi13; + spi14 = &spi14; + spi15 = &spi15; + spi16 = &spi16; + spi17 = &spi17; + spi18 = &spi18; + spi19 = &spi19; + }; + + chosen { }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <38400000>; + clock-output-names = "xo_board"; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x0>; + enable-method = "psci"; + capacity-dmips-mhz = <448>; + dynamic-power-coefficient = <105>; + next-level-cache = <&L2_0>; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, + <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>; + #cooling-cells = <2>; + L2_0: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x100>; + enable-method = "psci"; + capacity-dmips-mhz = <448>; + dynamic-power-coefficient = <105>; + next-level-cache = <&L2_100>; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, + <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>; + #cooling-cells = <2>; + L2_100: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x200>; + enable-method = "psci"; + capacity-dmips-mhz = <448>; + dynamic-power-coefficient = <105>; + next-level-cache = <&L2_200>; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, + <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>; + #cooling-cells = <2>; + L2_200: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x300>; + enable-method = "psci"; + capacity-dmips-mhz = <448>; + dynamic-power-coefficient = <105>; + next-level-cache = <&L2_300>; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, + <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>; + #cooling-cells = <2>; + L2_300: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x400>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <379>; + next-level-cache = <&L2_400>; + power-domains = <&CPU_PD4>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, + <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>; + #cooling-cells = <2>; + L2_400: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x500>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <379>; + next-level-cache = <&L2_500>; + power-domains = <&CPU_PD5>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, + <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>; + #cooling-cells = <2>; + L2_500: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x600>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <379>; + next-level-cache = <&L2_600>; + power-domains = <&CPU_PD6>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, + <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>; + #cooling-cells = <2>; + L2_600: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x700>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <444>; + next-level-cache = <&L2_700>; + power-domains = <&CPU_PD7>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 2>; + operating-points-v2 = <&cpu7_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, + <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>; + #cooling-cells = <2>; + L2_700: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + + core4 { + cpu = <&CPU4>; + }; + + core5 { + cpu = <&CPU5>; + }; + + core6 { + cpu = <&CPU6>; + }; + + core7 { + cpu = <&CPU7>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "silver-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <360>; + exit-latency-us = <531>; + min-residency-us = <3934>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "gold-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <702>; + exit-latency-us = <1061>; + min-residency-us = <4488>; + local-timer-stop; + }; + }; + + domain-idle-states { + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "domain-idle-state"; + idle-state-name = "cluster-llcc-off"; + arm,psci-suspend-param = <0x4100c244>; + entry-latency-us = <3264>; + exit-latency-us = <6562>; + min-residency-us = <9987>; + local-timer-stop; + status = "disabled"; + }; + }; + }; + + cpu0_opp_table: opp-table-cpu0 { + compatible = "operating-points-v2"; + opp-shared; + + cpu0_opp1: opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-peak-kBps = <800000 9600000>; + }; + + cpu0_opp2: opp-403200000 { + opp-hz = /bits/ 64 <403200000>; + opp-peak-kBps = <800000 9600000>; + }; + + cpu0_opp3: opp-518400000 { + opp-hz = /bits/ 64 <518400000>; + opp-peak-kBps = <800000 16588800>; + }; + + cpu0_opp4: opp-614400000 { + opp-hz = /bits/ 64 <614400000>; + opp-peak-kBps = <800000 16588800>; + }; + + cpu0_opp5: opp-691200000 { + opp-hz = /bits/ 64 <691200000>; + opp-peak-kBps = <800000 19660800>; + }; + + cpu0_opp6: opp-787200000 { + opp-hz = /bits/ 64 <787200000>; + opp-peak-kBps = <1804000 19660800>; + }; + + cpu0_opp7: opp-883200000 { + opp-hz = /bits/ 64 <883200000>; + opp-peak-kBps = <1804000 23347200>; + }; + + cpu0_opp8: opp-979200000 { + opp-hz = /bits/ 64 <979200000>; + opp-peak-kBps = <1804000 26419200>; + }; + + cpu0_opp9: opp-1075200000 { + opp-hz = /bits/ 64 <1075200000>; + opp-peak-kBps = <1804000 29491200>; + }; + + cpu0_opp10: opp-1171200000 { + opp-hz = /bits/ 64 <1171200000>; + opp-peak-kBps = <1804000 32563200>; + }; + + cpu0_opp11: opp-1248000000 { + opp-hz = /bits/ 64 <1248000000>; + opp-peak-kBps = <1804000 36249600>; + }; + + cpu0_opp12: opp-1344000000 { + opp-hz = /bits/ 64 <1344000000>; + opp-peak-kBps = <2188000 36249600>; + }; + + cpu0_opp13: opp-1420800000 { + opp-hz = /bits/ 64 <1420800000>; + opp-peak-kBps = <2188000 39321600>; + }; + + cpu0_opp14: opp-1516800000 { + opp-hz = /bits/ 64 <1516800000>; + opp-peak-kBps = <3072000 42393600>; + }; + + cpu0_opp15: opp-1612800000 { + opp-hz = /bits/ 64 <1612800000>; + opp-peak-kBps = <3072000 42393600>; + }; + + cpu0_opp16: opp-1708800000 { + opp-hz = /bits/ 64 <1708800000>; + opp-peak-kBps = <4068000 42393600>; + }; + + cpu0_opp17: opp-1804800000 { + opp-hz = /bits/ 64 <1804800000>; + opp-peak-kBps = <4068000 42393600>; + }; + }; + + cpu4_opp_table: opp-table-cpu4 { + compatible = "operating-points-v2"; + opp-shared; + + cpu4_opp1: opp-710400000 { + opp-hz = /bits/ 64 <710400000>; + opp-peak-kBps = <1804000 19660800>; + }; + + cpu4_opp2: opp-825600000 { + opp-hz = /bits/ 64 <825600000>; + opp-peak-kBps = <2188000 23347200>; + }; + + cpu4_opp3: opp-940800000 { + opp-hz = /bits/ 64 <940800000>; + opp-peak-kBps = <2188000 26419200>; + }; + + cpu4_opp4: opp-1056000000 { + opp-hz = /bits/ 64 <1056000000>; + opp-peak-kBps = <3072000 26419200>; + }; + + cpu4_opp5: opp-1171200000 { + opp-hz = /bits/ 64 <1171200000>; + opp-peak-kBps = <3072000 29491200>; + }; + + cpu4_opp6: opp-1286400000 { + opp-hz = /bits/ 64 <1286400000>; + opp-peak-kBps = <4068000 29491200>; + }; + + cpu4_opp7: opp-1382400000 { + opp-hz = /bits/ 64 <1382400000>; + opp-peak-kBps = <4068000 32563200>; + }; + + cpu4_opp8: opp-1478400000 { + opp-hz = /bits/ 64 <1478400000>; + opp-peak-kBps = <4068000 32563200>; + }; + + cpu4_opp9: opp-1574400000 { + opp-hz = /bits/ 64 <1574400000>; + opp-peak-kBps = <5412000 39321600>; + }; + + cpu4_opp10: opp-1670400000 { + opp-hz = /bits/ 64 <1670400000>; + opp-peak-kBps = <5412000 42393600>; + }; + + cpu4_opp11: opp-1766400000 { + opp-hz = /bits/ 64 <1766400000>; + opp-peak-kBps = <5412000 45465600>; + }; + + cpu4_opp12: opp-1862400000 { + opp-hz = /bits/ 64 <1862400000>; + opp-peak-kBps = <6220000 45465600>; + }; + + cpu4_opp13: opp-1958400000 { + opp-hz = /bits/ 64 <1958400000>; + opp-peak-kBps = <6220000 48537600>; + }; + + cpu4_opp14: opp-2054400000 { + opp-hz = /bits/ 64 <2054400000>; + opp-peak-kBps = <7216000 48537600>; + }; + + cpu4_opp15: opp-2150400000 { + opp-hz = /bits/ 64 <2150400000>; + opp-peak-kBps = <7216000 51609600>; + }; + + cpu4_opp16: opp-2246400000 { + opp-hz = /bits/ 64 <2246400000>; + opp-peak-kBps = <7216000 51609600>; + }; + + cpu4_opp17: opp-2342400000 { + opp-hz = /bits/ 64 <2342400000>; + opp-peak-kBps = <8368000 51609600>; + }; + + cpu4_opp18: opp-2419200000 { + opp-hz = /bits/ 64 <2419200000>; + opp-peak-kBps = <8368000 51609600>; + }; + }; + + cpu7_opp_table: opp-table-cpu7 { + compatible = "operating-points-v2"; + opp-shared; + + cpu7_opp1: opp-844800000 { + opp-hz = /bits/ 64 <844800000>; + opp-peak-kBps = <2188000 19660800>; + }; + + cpu7_opp2: opp-960000000 { + opp-hz = /bits/ 64 <960000000>; + opp-peak-kBps = <2188000 26419200>; + }; + + cpu7_opp3: opp-1075200000 { + opp-hz = /bits/ 64 <1075200000>; + opp-peak-kBps = <3072000 26419200>; + }; + + cpu7_opp4: opp-1190400000 { + opp-hz = /bits/ 64 <1190400000>; + opp-peak-kBps = <3072000 29491200>; + }; + + cpu7_opp5: opp-1305600000 { + opp-hz = /bits/ 64 <1305600000>; + opp-peak-kBps = <4068000 32563200>; + }; + + cpu7_opp6: opp-1401600000 { + opp-hz = /bits/ 64 <1401600000>; + opp-peak-kBps = <4068000 32563200>; + }; + + cpu7_opp7: opp-1516800000 { + opp-hz = /bits/ 64 <1516800000>; + opp-peak-kBps = <4068000 36249600>; + }; + + cpu7_opp8: opp-1632000000 { + opp-hz = /bits/ 64 <1632000000>; + opp-peak-kBps = <5412000 39321600>; + }; + + cpu7_opp9: opp-1747200000 { + opp-hz = /bits/ 64 <1708800000>; + opp-peak-kBps = <5412000 42393600>; + }; + + cpu7_opp10: opp-1862400000 { + opp-hz = /bits/ 64 <1862400000>; + opp-peak-kBps = <6220000 45465600>; + }; + + cpu7_opp11: opp-1977600000 { + opp-hz = /bits/ 64 <1977600000>; + opp-peak-kBps = <6220000 48537600>; + }; + + cpu7_opp12: opp-2073600000 { + opp-hz = /bits/ 64 <2073600000>; + opp-peak-kBps = <7216000 48537600>; + }; + + cpu7_opp13: opp-2169600000 { + opp-hz = /bits/ 64 <2169600000>; + opp-peak-kBps = <7216000 51609600>; + }; + + cpu7_opp14: opp-2265600000 { + opp-hz = /bits/ 64 <2265600000>; + opp-peak-kBps = <7216000 51609600>; + }; + + cpu7_opp15: opp-2361600000 { + opp-hz = /bits/ 64 <2361600000>; + opp-peak-kBps = <8368000 51609600>; + }; + + cpu7_opp16: opp-2457600000 { + opp-hz = /bits/ 64 <2457600000>; + opp-peak-kBps = <8368000 51609600>; + }; + + cpu7_opp17: opp-2553600000 { + opp-hz = /bits/ 64 <2553600000>; + opp-peak-kBps = <8368000 51609600>; + }; + + cpu7_opp18: opp-2649600000 { + opp-hz = /bits/ 64 <2649600000>; + opp-peak-kBps = <8368000 51609600>; + }; + + cpu7_opp19: opp-2745600000 { + opp-hz = /bits/ 64 <2745600000>; + opp-peak-kBps = <8368000 51609600>; + }; + + cpu7_opp20: opp-2841600000 { + opp-hz = /bits/ 64 <2841600000>; + opp-peak-kBps = <8368000 51609600>; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-sm8250", "qcom,scm"; + #reset-cells = <1>; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x80000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = ; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + + CPU_PD0: cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD1: cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD2: cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD3: cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD4: cpu4 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD5: cpu5 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD6: cpu6 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD7: cpu7 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CLUSTER_PD: cpu-cluster0 { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP_0>; + }; + }; + + qup_opp_table: opp-table-qup { + compatible = "operating-points-v2"; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-120000000 { + opp-hz = /bits/ 64 <120000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: memory@80000000 { + reg = <0x0 0x80000000 0x0 0x600000>; + no-map; + }; + + xbl_aop_mem: memory@80700000 { + reg = <0x0 0x80700000 0x0 0x160000>; + no-map; + }; + + cmd_db: memory@80860000 { + compatible = "qcom,cmd-db"; + reg = <0x0 0x80860000 0x0 0x20000>; + no-map; + }; + + smem_mem: memory@80900000 { + reg = <0x0 0x80900000 0x0 0x200000>; + no-map; + }; + + removed_mem: memory@80b00000 { + reg = <0x0 0x80b00000 0x0 0x5300000>; + no-map; + }; + + camera_mem: memory@86200000 { + reg = <0x0 0x86200000 0x0 0x500000>; + no-map; + }; + + wlan_mem: memory@86700000 { + reg = <0x0 0x86700000 0x0 0x100000>; + no-map; + }; + + ipa_fw_mem: memory@86800000 { + reg = <0x0 0x86800000 0x0 0x10000>; + no-map; + }; + + ipa_gsi_mem: memory@86810000 { + reg = <0x0 0x86810000 0x0 0xa000>; + no-map; + }; + + gpu_mem: memory@8681a000 { + reg = <0x0 0x8681a000 0x0 0x2000>; + no-map; + }; + + npu_mem: memory@86900000 { + reg = <0x0 0x86900000 0x0 0x500000>; + no-map; + }; + + video_mem: memory@86e00000 { + reg = <0x0 0x86e00000 0x0 0x500000>; + no-map; + }; + + cvp_mem: memory@87300000 { + reg = <0x0 0x87300000 0x0 0x500000>; + no-map; + }; + + cdsp_mem: memory@87800000 { + reg = <0x0 0x87800000 0x0 0x1400000>; + no-map; + }; + + slpi_mem: memory@88c00000 { + reg = <0x0 0x88c00000 0x0 0x1500000>; + no-map; + }; + + adsp_mem: memory@8a100000 { + reg = <0x0 0x8a100000 0x0 0x1d00000>; + no-map; + }; + + spss_mem: memory@8be00000 { + reg = <0x0 0x8be00000 0x0 0x100000>; + no-map; + }; + + cdsp_secure_heap: memory@8bf00000 { + reg = <0x0 0x8bf00000 0x0 0x4600000>; + no-map; + }; + }; + + smem { + compatible = "qcom,smem"; + memory-region = <&smem_mem>; + hwlocks = <&tcsr_mutex 3>; + }; + + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + smp2p_adsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_adsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-cdsp { + compatible = "qcom,smp2p"; + qcom,smem = <94>, <432>; + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + smp2p_cdsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_cdsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-slpi { + compatible = "qcom,smp2p"; + qcom,smem = <481>, <430>; + interrupts-extended = <&ipcc IPCC_CLIENT_SLPI + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_SLPI + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <3>; + + smp2p_slpi_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_slpi_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc@0 { + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + compatible = "simple-bus"; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-sm8250"; + reg = <0x0 0x00100000 0x0 0x1f0000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clock-names = "bi_tcxo", + "bi_tcxo_ao", + "sleep_clk"; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>; + }; + + ipcc: mailbox@408000 { + compatible = "qcom,sm8250-ipcc", "qcom,ipcc"; + reg = <0 0x00408000 0 0x1000>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <3>; + #mbox-cells = <2>; + }; + + rng: rng@793000 { + compatible = "qcom,prng-ee"; + reg = <0 0x00793000 0 0x1000>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; + + gpi_dma2: dma-controller@800000 { + compatible = "qcom,sm8250-gpi-dma"; + reg = <0 0x00800000 0 0x70000>; + interrupts = , + , + , + , + , + , + , + , + , + ; + dma-channels = <10>; + dma-channel-mask = <0x3f>; + iommus = <&apps_smmu 0x76 0x0>; + #dma-cells = <3>; + status = "disabled"; + }; + + qupv3_id_2: geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x008c0000 0x0 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; + #address-cells = <2>; + #size-cells = <2>; + iommus = <&apps_smmu 0x63 0x0>; + ranges; + status = "disabled"; + + i2c14: i2c@880000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00880000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c14_default>; + interrupts = ; + dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>, + <&gpi_dma2 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi14: spi@880000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00880000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + interrupts = ; + dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>, + <&gpi_dma2 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c15: i2c@884000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00884000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c15_default>; + interrupts = ; + dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>, + <&gpi_dma2 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi15: spi@884000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00884000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + interrupts = ; + dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>, + <&gpi_dma2 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c16: i2c@888000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00888000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c16_default>; + interrupts = ; + dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>, + <&gpi_dma2 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi16: spi@888000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00888000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + interrupts = ; + dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>, + <&gpi_dma2 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c17: i2c@88c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0088c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c17_default>; + interrupts = ; + dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>, + <&gpi_dma2 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi17: spi@88c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0088c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + interrupts = ; + dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>, + <&gpi_dma2 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart17: serial@88c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x0088c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart17_default>; + interrupts = ; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; + status = "disabled"; + }; + + i2c18: i2c@890000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00890000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c18_default>; + interrupts = ; + dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>, + <&gpi_dma2 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi18: spi@890000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00890000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + interrupts = ; + dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>, + <&gpi_dma2 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart18: serial@890000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00890000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart18_default>; + interrupts = ; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; + status = "disabled"; + }; + + i2c19: i2c@894000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00894000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c19_default>; + interrupts = ; + dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>, + <&gpi_dma2 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi19: spi@894000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00894000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + interrupts = ; + dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>, + <&gpi_dma2 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + gpi_dma0: dma-controller@900000 { + compatible = "qcom,sm8250-gpi-dma"; + reg = <0 0x00900000 0 0x70000>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + ; + dma-channels = <15>; + dma-channel-mask = <0x7ff>; + iommus = <&apps_smmu 0x5b6 0x0>; + #dma-cells = <3>; + status = "disabled"; + }; + + qupv3_id_0: geniqup@9c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x009c0000 0x0 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + #address-cells = <2>; + #size-cells = <2>; + iommus = <&apps_smmu 0x5a3 0x0>; + ranges; + status = "disabled"; + + i2c0: i2c@980000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00980000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c0_default>; + interrupts = ; + dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, + <&gpi_dma0 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi0: spi@980000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00980000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + interrupts = ; + dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, + <&gpi_dma0 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@984000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00984000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c1_default>; + interrupts = ; + dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, + <&gpi_dma0 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@984000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00984000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + interrupts = ; + dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, + <&gpi_dma0 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@988000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00988000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c2_default>; + interrupts = ; + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, + <&gpi_dma0 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@988000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00988000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + interrupts = ; + dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, + <&gpi_dma0 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart2: serial@988000 { + compatible = "qcom,geni-debug-uart"; + reg = <0 0x00988000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart2_default>; + interrupts = ; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; + status = "disabled"; + }; + + i2c3: i2c@98c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0098c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c3_default>; + interrupts = ; + dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, + <&gpi_dma0 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi3: spi@98c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0098c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + interrupts = ; + dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, + <&gpi_dma0 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@990000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00990000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c4_default>; + interrupts = ; + dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, + <&gpi_dma0 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi4: spi@990000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00990000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + interrupts = ; + dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, + <&gpi_dma0 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@994000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00994000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c5_default>; + interrupts = ; + dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, + <&gpi_dma0 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi5: spi@994000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00994000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + interrupts = ; + dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, + <&gpi_dma0 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c6: i2c@998000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00998000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c6_default>; + interrupts = ; + dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>, + <&gpi_dma0 1 6 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi6: spi@998000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00998000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + interrupts = ; + dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>, + <&gpi_dma0 1 6 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart6: serial@998000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00998000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart6_default>; + interrupts = ; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; + status = "disabled"; + }; + + i2c7: i2c@99c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0099c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c7_default>; + interrupts = ; + dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>, + <&gpi_dma0 1 7 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi7: spi@99c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0099c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + interrupts = ; + dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>, + <&gpi_dma0 1 7 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + gpi_dma1: dma-controller@a00000 { + compatible = "qcom,sm8250-gpi-dma"; + reg = <0 0x00a00000 0 0x70000>; + interrupts = , + , + , + , + , + , + , + , + , + ; + dma-channels = <10>; + dma-channel-mask = <0x3f>; + iommus = <&apps_smmu 0x56 0x0>; + #dma-cells = <3>; + status = "disabled"; + }; + + qupv3_id_1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x00ac0000 0x0 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + #address-cells = <2>; + #size-cells = <2>; + iommus = <&apps_smmu 0x43 0x0>; + ranges; + status = "disabled"; + + i2c8: i2c@a80000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a80000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c8_default>; + interrupts = ; + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, + <&gpi_dma1 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi8: spi@a80000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a80000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + interrupts = ; + dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, + <&gpi_dma1 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c9: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a84000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c9_default>; + interrupts = ; + dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, + <&gpi_dma1 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi9: spi@a84000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a84000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + interrupts = ; + dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, + <&gpi_dma1 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c10: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a88000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c10_default>; + interrupts = ; + dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, + <&gpi_dma1 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi10: spi@a88000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a88000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + interrupts = ; + dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, + <&gpi_dma1 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c11: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a8c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c11_default>; + interrupts = ; + dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, + <&gpi_dma1 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi11: spi@a8c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a8c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + interrupts = ; + dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, + <&gpi_dma1 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c12: i2c@a90000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a90000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c12_default>; + interrupts = ; + dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, + <&gpi_dma1 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi12: spi@a90000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a90000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + interrupts = ; + dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, + <&gpi_dma1 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart12: serial@a90000 { + compatible = "qcom,geni-debug-uart"; + reg = <0x0 0x00a90000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart12_default>; + interrupts = ; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; + status = "disabled"; + }; + + i2c13: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a94000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c13_default>; + interrupts = ; + dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, + <&gpi_dma1 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi13: spi@a94000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a94000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + interrupts = ; + dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>, + <&gpi_dma1 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + config_noc: interconnect@1500000 { + compatible = "qcom,sm8250-config-noc"; + reg = <0 0x01500000 0 0xa580>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect@1620000 { + compatible = "qcom,sm8250-system-noc"; + reg = <0 0x01620000 0 0x1c200>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mc_virt: interconnect@163d000 { + compatible = "qcom,sm8250-mc-virt"; + reg = <0 0x0163d000 0 0x1000>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre1_noc: interconnect@16e0000 { + compatible = "qcom,sm8250-aggre1-noc"; + reg = <0 0x016e0000 0 0x1f180>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre2_noc: interconnect@1700000 { + compatible = "qcom,sm8250-aggre2-noc"; + reg = <0 0x01700000 0 0x33000>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + compute_noc: interconnect@1733000 { + compatible = "qcom,sm8250-compute-noc"; + reg = <0 0x01733000 0 0xa180>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mmss_noc: interconnect@1740000 { + compatible = "qcom,sm8250-mmss-noc"; + reg = <0 0x01740000 0 0x1f080>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + pcie0: pci@1c00000 { + compatible = "qcom,pcie-sm8250"; + reg = <0 0x01c00000 0 0x3000>, + <0 0x60000000 0 0xf1d>, + <0 0x60000f20 0 0xa8>, + <0 0x60001000 0 0x1000>, + <0 0x60100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; + + interrupts = , + , + , + , + , + , + , + ; + interrupt-names = "msi0", "msi1", "msi2", "msi3", + "msi4", "msi5", "msi6", "msi7"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "tbu", + "ddrss_sf_tbu"; + + iommus = <&apps_smmu 0x1c00 0x7f>; + iommu-map = <0x0 &apps_smmu 0x1c00 0x1>, + <0x100 &apps_smmu 0x1c01 0x1>; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_0_GDSC>; + + phys = <&pcie0_lane>; + phy-names = "pciephy"; + + perst-gpios = <&tlmm 79 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_default_state>; + dma-coherent; + + status = "disabled"; + }; + + pcie0_phy: phy@1c06000 { + compatible = "qcom,sm8250-qmp-gen3x1-pcie-phy"; + reg = <0 0x01c06000 0 0x1c0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_WIFI_CLKREF_EN>, + <&gcc GCC_PCIE0_PHY_REFGEN_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "refgen"; + + resets = <&gcc GCC_PCIE_0_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE0_PHY_REFGEN_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie0_lane: phy@1c06200 { + reg = <0 0x1c06200 0 0x170>, /* tx */ + <0 0x1c06400 0 0x200>, /* rx */ + <0 0x1c06800 0 0x1f0>, /* pcs */ + <0 0x1c06c00 0 0xf4>; /* "pcs_lane" same as pcs_misc? */ + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "pipe0"; + + #phy-cells = <0>; + + #clock-cells = <0>; + clock-output-names = "pcie_0_pipe_clk"; + }; + }; + + pcie1: pci@1c08000 { + compatible = "qcom,pcie-sm8250"; + reg = <0 0x01c08000 0 0x3000>, + <0 0x40000000 0 0xf1d>, + <0 0x40000f20 0 0xa8>, + <0 0x40001000 0 0x1000>, + <0 0x40100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + device_type = "pci"; + linux,pci-domain = <1>; + bus-range = <0x00 0xff>; + num-lanes = <2>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; + + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, + <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, + <&gcc GCC_PCIE_WIGIG_CLKREF_EN>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ref", + "tbu", + "ddrss_sf_tbu"; + + assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; + assigned-clock-rates = <19200000>; + + iommus = <&apps_smmu 0x1c80 0x7f>; + iommu-map = <0x0 &apps_smmu 0x1c80 0x1>, + <0x100 &apps_smmu 0x1c81 0x1>; + + resets = <&gcc GCC_PCIE_1_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_1_GDSC>; + + phys = <&pcie1_lane>; + phy-names = "pciephy"; + + perst-gpios = <&tlmm 82 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 84 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_default_state>; + dma-coherent; + + status = "disabled"; + }; + + pcie1_phy: phy@1c0e000 { + compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy"; + reg = <0 0x01c0e000 0 0x1c0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_WIGIG_CLKREF_EN>, + <&gcc GCC_PCIE1_PHY_REFGEN_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "refgen"; + + resets = <&gcc GCC_PCIE_1_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE1_PHY_REFGEN_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie1_lane: phy@1c0e200 { + reg = <0 0x1c0e200 0 0x170>, /* tx0 */ + <0 0x1c0e400 0 0x200>, /* rx0 */ + <0 0x1c0ea00 0 0x1f0>, /* pcs */ + <0 0x1c0e600 0 0x170>, /* tx1 */ + <0 0x1c0e800 0 0x200>, /* rx1 */ + <0 0x1c0ee00 0 0xf4>; /* "pcs_com" same as pcs_misc? */ + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; + clock-names = "pipe0"; + + #phy-cells = <0>; + + #clock-cells = <0>; + clock-output-names = "pcie_1_pipe_clk"; + }; + }; + + pcie2: pci@1c10000 { + compatible = "qcom,pcie-sm8250"; + reg = <0 0x01c10000 0 0x3000>, + <0 0x64000000 0 0xf1d>, + <0 0x64000f20 0 0xa8>, + <0 0x64001000 0 0x1000>, + <0 0x64100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + device_type = "pci"; + linux,pci-domain = <2>; + bus-range = <0x00 0xff>; + num-lanes = <2>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x00000000 0x0 0x64200000 0x0 0x100000>, + <0x02000000 0x0 0x64300000 0x0 0x64300000 0x0 0x3d00000>; + + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 290 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 415 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 416 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 417 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_2_PIPE_CLK>, + <&gcc GCC_PCIE_2_AUX_CLK>, + <&gcc GCC_PCIE_2_CFG_AHB_CLK>, + <&gcc GCC_PCIE_2_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_2_SLV_AXI_CLK>, + <&gcc GCC_PCIE_2_SLV_Q2A_AXI_CLK>, + <&gcc GCC_PCIE_MDM_CLKREF_EN>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ref", + "tbu", + "ddrss_sf_tbu"; + + assigned-clocks = <&gcc GCC_PCIE_2_AUX_CLK>; + assigned-clock-rates = <19200000>; + + iommus = <&apps_smmu 0x1d00 0x7f>; + iommu-map = <0x0 &apps_smmu 0x1d00 0x1>, + <0x100 &apps_smmu 0x1d01 0x1>; + + resets = <&gcc GCC_PCIE_2_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_2_GDSC>; + + phys = <&pcie2_lane>; + phy-names = "pciephy"; + + perst-gpios = <&tlmm 85 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie2_default_state>; + dma-coherent; + + status = "disabled"; + }; + + pcie2_phy: phy@1c16000 { + compatible = "qcom,sm8250-qmp-modem-pcie-phy"; + reg = <0 0x1c16000 0 0x1c0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_2_CFG_AHB_CLK>, + <&gcc GCC_PCIE_MDM_CLKREF_EN>, + <&gcc GCC_PCIE2_PHY_REFGEN_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "refgen"; + + resets = <&gcc GCC_PCIE_2_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE2_PHY_REFGEN_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie2_lane: phy@1c16200 { + reg = <0 0x1c16200 0 0x170>, /* tx0 */ + <0 0x1c16400 0 0x200>, /* rx0 */ + <0 0x1c16a00 0 0x1f0>, /* pcs */ + <0 0x1c16600 0 0x170>, /* tx1 */ + <0 0x1c16800 0 0x200>, /* rx1 */ + <0 0x1c16e00 0 0xf4>; /* "pcs_com" same as pcs_misc? */ + clocks = <&gcc GCC_PCIE_2_PIPE_CLK>; + clock-names = "pipe0"; + + #phy-cells = <0>; + + #clock-cells = <0>; + clock-output-names = "pcie_2_pipe_clk"; + }; + }; + + ufs_mem_hc: ufshc@1d84000 { + compatible = "qcom,sm8250-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0 0x01d84000 0 0x3000>; + interrupts = ; + phys = <&ufs_mem_phy_lanes>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + power-domains = <&gcc UFS_PHY_GDSC>; + + iommus = <&apps_smmu 0x0e0 0>, <&apps_smmu 0x4e0 0>; + + clock-names = + "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + clocks = + <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + freq-table-hz = + <37500000 300000000>, + <0 0>, + <0 0>, + <37500000 300000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>; + + status = "disabled"; + }; + + ufs_mem_phy: phy@1d87000 { + compatible = "qcom,sm8250-qmp-ufs-phy"; + reg = <0 0x01d87000 0 0x1c0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clock-names = "ref", + "ref_aux"; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + status = "disabled"; + + ufs_mem_phy_lanes: phy@1d87400 { + reg = <0 0x01d87400 0 0x16c>, + <0 0x01d87600 0 0x200>, + <0 0x01d87c00 0 0x200>, + <0 0x01d87800 0 0x16c>, + <0 0x01d87a00 0 0x200>; + #phy-cells = <0>; + }; + }; + + ipa_virt: interconnect@1e00000 { + compatible = "qcom,sm8250-ipa-virt"; + reg = <0 0x01e00000 0 0x1000>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x01f40000 0x0 0x40000>; + #hwlock-cells = <1>; + }; + + wsamacro: codec@3240000 { + compatible = "qcom,sm8250-lpass-wsa-macro"; + reg = <0 0x03240000 0 0x1000>; + clocks = <&audiocc LPASS_CDC_WSA_MCLK>, + <&audiocc LPASS_CDC_WSA_NPL>, + <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&aoncc LPASS_CDC_VA_MCLK>, + <&vamacro>; + + clock-names = "mclk", "npl", "macro", "dcodec", "va", "fsgen"; + + #clock-cells = <0>; + clock-frequency = <9600000>; + clock-output-names = "mclk"; + #sound-dai-cells = <1>; + + pinctrl-names = "default"; + pinctrl-0 = <&wsa_swr_active>; + }; + + swr0: soundwire-controller@3250000 { + reg = <0 0x03250000 0 0x2000>; + compatible = "qcom,soundwire-v1.5.1"; + interrupts = ; + clocks = <&wsamacro>; + clock-names = "iface"; + + qcom,din-ports = <2>; + qcom,dout-ports = <6>; + + qcom,ports-sinterval-low = /bits/ 8 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x0f 0x0f>; + qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0c 0x06 0x12 0x0d 0x07 0x0a>; + qcom,ports-offset2 = /bits/ 8 <0xff 0x00 0x1f 0xff 0x00 0x1f 0x00 0x00>; + qcom,ports-block-pack-mode = /bits/ 8 <0x0 0x0 0x1 0x0 0x0 0x1 0x0 0x0>; + + #sound-dai-cells = <1>; + #address-cells = <2>; + #size-cells = <0>; + }; + + audiocc: clock-controller@3300000 { + compatible = "qcom,sm8250-lpass-audiocc"; + reg = <0 0x03300000 0 0x30000>; + #clock-cells = <1>; + clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "core", "audio", "bus"; + }; + + vamacro: codec@3370000 { + compatible = "qcom,sm8250-lpass-va-macro"; + reg = <0 0x03370000 0 0x1000>; + clocks = <&aoncc LPASS_CDC_VA_MCLK>, + <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + + clock-names = "mclk", "macro", "dcodec"; + + #clock-cells = <0>; + clock-frequency = <9600000>; + clock-output-names = "fsgen"; + #sound-dai-cells = <1>; + }; + + rxmacro: rxmacro@3200000 { + pinctrl-names = "default"; + pinctrl-0 = <&rx_swr_active>; + compatible = "qcom,sm8250-lpass-rx-macro"; + reg = <0 0x3200000 0 0x1000>; + status = "disabled"; + + clocks = <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&vamacro>; + + clock-names = "mclk", "npl", "macro", "dcodec", "fsgen"; + + #clock-cells = <0>; + clock-frequency = <9600000>; + clock-output-names = "mclk"; + #sound-dai-cells = <1>; + }; + + swr1: soundwire-controller@3210000 { + reg = <0 0x3210000 0 0x2000>; + compatible = "qcom,soundwire-v1.5.1"; + status = "disabled"; + interrupts = ; + clocks = <&rxmacro>; + clock-names = "iface"; + label = "RX"; + qcom,din-ports = <0>; + qcom,dout-ports = <5>; + + qcom,ports-sinterval-low = /bits/ 8 <0x03 0x1F 0x1F 0x07 0x00>; + qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0B 0x01 0x00>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0B 0x00 0x00>; + qcom,ports-hstart = /bits/ 8 <0xFF 0x03 0xFF 0xFF 0xFF>; + qcom,ports-hstop = /bits/ 8 <0xFF 0x06 0xFF 0xFF 0xFF>; + qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xFF 0xFF>; + qcom,ports-block-pack-mode = /bits/ 8 <0xFF 0x00 0x01 0xFF 0xFF>; + qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00>; + qcom,ports-block-group-count = /bits/ 8 <0xFF 0xFF 0xFF 0xFF 0x00>; + + #sound-dai-cells = <1>; + #address-cells = <2>; + #size-cells = <0>; + }; + + txmacro: txmacro@3220000 { + pinctrl-names = "default"; + pinctrl-0 = <&tx_swr_active>; + compatible = "qcom,sm8250-lpass-tx-macro"; + reg = <0 0x3220000 0 0x1000>; + status = "disabled"; + + clocks = <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&vamacro>; + + clock-names = "mclk", "npl", "macro", "dcodec", "fsgen"; + + #clock-cells = <0>; + clock-frequency = <9600000>; + clock-output-names = "mclk"; + #address-cells = <2>; + #size-cells = <2>; + #sound-dai-cells = <1>; + }; + + /* tx macro */ + swr2: soundwire-controller@3230000 { + reg = <0 0x3230000 0 0x2000>; + compatible = "qcom,soundwire-v1.5.1"; + interrupts-extended = <&intc GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "core"; + status = "disabled"; + + clocks = <&txmacro>; + clock-names = "iface"; + label = "TX"; + + qcom,din-ports = <5>; + qcom,dout-ports = <0>; + qcom,ports-sinterval-low = /bits/ 8 <0xFF 0x01 0x01 0x03 0x03>; + qcom,ports-offset1 = /bits/ 8 <0xFF 0x01 0x00 0x02 0x00>; + qcom,ports-offset2 = /bits/ 8 <0xFF 0x00 0x00 0x00 0x00>; + qcom,ports-block-pack-mode = /bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF>; + qcom,ports-hstart = /bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF>; + qcom,ports-hstop = /bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF>; + qcom,ports-word-length = /bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF>; + qcom,ports-block-group-count = /bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF>; + qcom,ports-lane-control = /bits/ 8 <0xFF 0x00 0x01 0x00 0x01>; + qcom,port-offset = <1>; + #sound-dai-cells = <1>; + #address-cells = <2>; + #size-cells = <0>; + }; + + aoncc: clock-controller@3380000 { + compatible = "qcom,sm8250-lpass-aoncc"; + reg = <0 0x03380000 0 0x40000>; + #clock-cells = <1>; + clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "core", "audio", "bus"; + }; + + lpass_tlmm: pinctrl@33c0000{ + compatible = "qcom,sm8250-lpass-lpi-pinctrl"; + reg = <0 0x033c0000 0x0 0x20000>, + <0 0x03550000 0x0 0x10000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 14>; + + clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "core", "audio"; + + wsa_swr_active: wsa-swr-active-pins { + clk { + pins = "gpio10"; + function = "wsa_swr_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data { + pins = "gpio11"; + function = "wsa_swr_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + + }; + }; + + wsa_swr_sleep: wsa-swr-sleep-pins { + clk { + pins = "gpio10"; + function = "wsa_swr_clk"; + drive-strength = <2>; + input-enable; + bias-pull-down; + }; + + data { + pins = "gpio11"; + function = "wsa_swr_data"; + drive-strength = <2>; + input-enable; + bias-pull-down; + + }; + }; + + dmic01_active: dmic01-active-pins { + clk { + pins = "gpio6"; + function = "dmic1_clk"; + drive-strength = <8>; + output-high; + }; + data { + pins = "gpio7"; + function = "dmic1_data"; + drive-strength = <8>; + input-enable; + }; + }; + + dmic01_sleep: dmic01-sleep-pins { + clk { + pins = "gpio6"; + function = "dmic1_clk"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + data { + pins = "gpio7"; + function = "dmic1_data"; + drive-strength = <2>; + bias-pull-down; + input-enable; + }; + }; + + rx_swr_active: rx_swr-active-pins { + clk { + pins = "gpio3"; + function = "swr_rx_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data { + pins = "gpio4", "gpio5"; + function = "swr_rx_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + + tx_swr_active: tx_swr-active-pins { + clk { + pins = "gpio0"; + function = "swr_tx_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data { + pins = "gpio1", "gpio2"; + function = "swr_tx_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + + tx_swr_sleep: tx_swr-sleep-pins { + clk { + pins = "gpio0"; + function = "swr_tx_clk"; + drive-strength = <2>; + input-enable; + bias-pull-down; + }; + + data1 { + pins = "gpio1"; + function = "swr_tx_data"; + drive-strength = <2>; + input-enable; + bias-bus-hold; + }; + + data2 { + pins = "gpio2"; + function = "swr_tx_data"; + drive-strength = <2>; + input-enable; + bias-pull-down; + }; + }; + }; + + gpu: gpu@3d00000 { + compatible = "qcom,adreno-650.2", + "qcom,adreno"; + + reg = <0 0x03d00000 0 0x40000>; + reg-names = "kgsl_3d0_reg_memory"; + + interrupts = ; + + iommus = <&adreno_smmu 0 0x401>; + + operating-points-v2 = <&gpu_opp_table>; + + qcom,gmu = <&gmu>; + + status = "disabled"; + + zap-shader { + memory-region = <&gpu_mem>; + }; + + /* note: downstream checks gpu binning for 670 Mhz */ + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-670000000 { + opp-hz = /bits/ 64 <670000000>; + opp-level = ; + }; + + opp-587000000 { + opp-hz = /bits/ 64 <587000000>; + opp-level = ; + }; + + opp-525000000 { + opp-hz = /bits/ 64 <525000000>; + opp-level = ; + }; + + opp-490000000 { + opp-hz = /bits/ 64 <490000000>; + opp-level = ; + }; + + opp-441600000 { + opp-hz = /bits/ 64 <441600000>; + opp-level = ; + }; + + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-level = ; + }; + + opp-305000000 { + opp-hz = /bits/ 64 <305000000>; + opp-level = ; + }; + }; + }; + + gmu: gmu@3d6a000 { + compatible = "qcom,adreno-gmu-650.2", "qcom,adreno-gmu"; + + reg = <0 0x03d6a000 0 0x30000>, + <0 0x3de0000 0 0x10000>, + <0 0xb290000 0 0x10000>, + <0 0xb490000 0 0x10000>; + reg-names = "gmu", "rscc", "gmu_pdc", "gmu_pdc_seq"; + + interrupts = , + ; + interrupt-names = "hfi", "gmu"; + + clocks = <&gpucc GPU_CC_AHB_CLK>, + <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_CXO_CLK>, + <&gcc GCC_DDRSS_GPU_AXI_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>; + clock-names = "ahb", "gmu", "cxo", "axi", "memnoc"; + + power-domains = <&gpucc GPU_CX_GDSC>, + <&gpucc GPU_GX_GDSC>; + power-domain-names = "cx", "gx"; + + iommus = <&adreno_smmu 5 0x400>; + + operating-points-v2 = <&gmu_opp_table>; + + status = "disabled"; + + gmu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-level = ; + }; + }; + }; + + gpucc: clock-controller@3d90000 { + compatible = "qcom,sm8250-gpucc"; + reg = <0 0x03d90000 0 0x9000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + clock-names = "bi_tcxo", + "gcc_gpu_gpll0_clk_src", + "gcc_gpu_gpll0_div_clk_src"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + adreno_smmu: iommu@3da0000 { + compatible = "qcom,sm8250-smmu-500", "qcom,adreno-smmu", "arm,mmu-500"; + reg = <0 0x03da0000 0 0x10000>; + #iommu-cells = <2>; + #global-interrupts = <2>; + interrupts = , + , + , + , + , + , + , + , + , + ; + clocks = <&gpucc GPU_CC_AHB_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>; + clock-names = "ahb", "bus", "iface"; + + power-domains = <&gpucc GPU_CX_GDSC>; + }; + + slpi: remoteproc@5c00000 { + compatible = "qcom,sm8250-slpi-pas"; + reg = <0 0x05c00000 0 0x4000>; + + interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SM8250_LCX>, + <&rpmhpd SM8250_LMX>; + power-domain-names = "lcx", "lmx"; + + memory-region = <&slpi_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_slpi_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_SLPI + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_SLPI + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "slpi"; + qcom,remote-pid = <3>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "sdsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x0541 0x0>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x0542 0x0>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x0543 0x0>; + /* note: shared-cb = <4> in downstream */ + }; + }; + }; + }; + + cdsp: remoteproc@8300000 { + compatible = "qcom,sm8250-cdsp-pas"; + reg = <0 0x08300000 0 0x10000>; + + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SM8250_CX>; + + memory-region = <&cdsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_cdsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "cdsp"; + qcom,remote-pid = <5>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "cdsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x1001 0x0460>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x1002 0x0460>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1003 0x0460>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1004 0x0460>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x1005 0x0460>; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x1006 0x0460>; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x1007 0x0460>; + }; + + compute-cb@8 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <8>; + iommus = <&apps_smmu 0x1008 0x0460>; + }; + + /* note: secure cb9 in downstream */ + }; + }; + }; + + sound: sound { + }; + + usb_1_hsphy: phy@88e3000 { + compatible = "qcom,sm8250-usb-hs-phy", + "qcom,usb-snps-hs-7nm-phy"; + reg = <0 0x088e3000 0 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + }; + + usb_2_hsphy: phy@88e4000 { + compatible = "qcom,sm8250-usb-hs-phy", + "qcom,usb-snps-hs-7nm-phy"; + reg = <0 0x088e4000 0 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; + }; + + usb_1_qmpphy: phy@88e9000 { + compatible = "qcom,sm8250-qmp-usb3-dp-phy"; + reg = <0 0x088e9000 0 0x200>, + <0 0x088e8000 0 0x40>, + <0 0x088ea000 0 0x200>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; + clock-names = "aux", "ref_clk_src", "com_aux"; + + resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, + <&gcc GCC_USB3_PHY_PRIM_BCR>; + reset-names = "phy", "common"; + + usb_1_ssphy: usb3-phy@88e9200 { + reg = <0 0x088e9200 0 0x200>, + <0 0x088e9400 0 0x200>, + <0 0x088e9c00 0 0x400>, + <0 0x088e9600 0 0x200>, + <0 0x088e9800 0 0x200>, + <0 0x088e9a00 0 0x100>; + #clock-cells = <0>; + #phy-cells = <0>; + clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_phy_pipe_clk_src"; + }; + + dp_phy: dp-phy@88ea200 { + reg = <0 0x088ea200 0 0x200>, + <0 0x088ea400 0 0x200>, + <0 0x088eaa00 0 0x200>, + <0 0x088ea600 0 0x200>, + <0 0x088ea800 0 0x200>; + #phy-cells = <0>; + #clock-cells = <1>; + }; + }; + + usb_2_qmpphy: phy@88eb000 { + compatible = "qcom,sm8250-qmp-usb3-uni-phy"; + reg = <0 0x088eb000 0 0x200>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_SEC_CLKREF_EN>, + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>; + clock-names = "aux", "ref_clk_src", "ref", "com_aux"; + + resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>, + <&gcc GCC_USB3_PHY_SEC_BCR>; + reset-names = "phy", "common"; + + usb_2_ssphy: phy@88eb200 { + reg = <0 0x088eb200 0 0x200>, + <0 0x088eb400 0 0x200>, + <0 0x088eb800 0 0x800>; + #clock-cells = <0>; + #phy-cells = <0>; + clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_uni_phy_pipe_clk_src"; + }; + }; + + sdhc_2: mmc@8804000 { + compatible = "qcom,sm8250-sdhci", "qcom,sdhci-msm-v5"; + reg = <0 0x08804000 0 0x1000>; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "core", "xo"; + iommus = <&apps_smmu 0x4a0 0x0>; + qcom,dll-config = <0x0007642c>; + qcom,ddr-config = <0x80040868>; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&sdhc2_opp_table>; + + status = "disabled"; + + sdhc2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + dc_noc: interconnect@90c0000 { + compatible = "qcom,sm8250-dc-noc"; + reg = <0 0x090c0000 0 0x4200>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + gem_noc: interconnect@9100000 { + compatible = "qcom,sm8250-gem-noc"; + reg = <0 0x09100000 0 0xb4000>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + npu_noc: interconnect@9990000 { + compatible = "qcom,sm8250-npu-noc"; + reg = <0 0x09990000 0 0x1600>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + usb_1: usb@a6f8800 { + compatible = "qcom,sm8250-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + dma-ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB3_SEC_CLKREF_EN>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "xo"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 15 IRQ_TYPE_EDGE_BOTH>, + <&pdc 14 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "hs_phy_irq", + "ss_phy_irq", + "dm_hs_phy_irq", + "dp_hs_phy_irq"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + usb_1_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xcd00>; + interrupts = ; + iommus = <&apps_smmu 0x0 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + system-cache-controller@9200000 { + compatible = "qcom,sm8250-llcc"; + reg = <0 0x09200000 0 0x1d0000>, <0 0x09600000 0 0x50000>; + reg-names = "llcc_base", "llcc_broadcast_base"; + }; + + usb_2: usb@a8f8800 { + compatible = "qcom,sm8250-dwc3", "qcom,dwc3"; + reg = <0 0x0a8f8800 0 0x400>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + dma-ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_SLEEP_CLK>, + <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB3_SEC_CLKREF_EN>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "xo"; + + assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 16 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 13 IRQ_TYPE_EDGE_BOTH>, + <&pdc 12 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "hs_phy_irq", + "ss_phy_irq", + "dm_hs_phy_irq", + "dp_hs_phy_irq"; + + power-domains = <&gcc USB30_SEC_GDSC>; + + resets = <&gcc GCC_USB30_SEC_BCR>; + + usb_2_dwc3: usb@a800000 { + compatible = "snps,dwc3"; + reg = <0 0x0a800000 0 0xcd00>; + interrupts = ; + iommus = <&apps_smmu 0x20 0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_2_hsphy>, <&usb_2_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + venus: video-codec@aa00000 { + compatible = "qcom,sm8250-venus"; + reg = <0 0x0aa00000 0 0x100000>; + interrupts = ; + power-domains = <&videocc MVS0C_GDSC>, + <&videocc MVS0_GDSC>, + <&rpmhpd SM8250_MX>; + power-domain-names = "venus", "vcodec0", "mx"; + operating-points-v2 = <&venus_opp_table>; + + clocks = <&gcc GCC_VIDEO_AXI0_CLK>, + <&videocc VIDEO_CC_MVS0C_CLK>, + <&videocc VIDEO_CC_MVS0_CLK>; + clock-names = "iface", "core", "vcodec0_core"; + + interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_VENUS_CFG>, + <&mmss_noc MASTER_VIDEO_P0 &mc_virt SLAVE_EBI_CH0>; + interconnect-names = "cpu-cfg", "video-mem"; + + iommus = <&apps_smmu 0x2100 0x0400>; + memory-region = <&video_mem>; + + resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>, + <&videocc VIDEO_CC_MVS0C_CLK_ARES>; + reset-names = "bus", "core"; + + status = "disabled"; + + video-decoder { + compatible = "venus-decoder"; + }; + + video-encoder { + compatible = "venus-encoder"; + }; + + venus_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-720000000 { + opp-hz = /bits/ 64 <720000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-1014000000 { + opp-hz = /bits/ 64 <1014000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-1098000000 { + opp-hz = /bits/ 64 <1098000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-1332000000 { + opp-hz = /bits/ 64 <1332000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + videocc: clock-controller@abf0000 { + compatible = "qcom,sm8250-videocc"; + reg = <0 0x0abf0000 0 0x10000>; + clocks = <&gcc GCC_VIDEO_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>; + power-domains = <&rpmhpd SM8250_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + clock-names = "iface", "bi_tcxo", "bi_tcxo_ao"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + cci0: cci@ac4f000 { + compatible = "qcom,sm8250-cci"; + #address-cells = <1>; + #size-cells = <0>; + + reg = <0 0x0ac4f000 0 0x1000>; + interrupts = ; + power-domains = <&camcc TITAN_TOP_GDSC>; + + clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>, + <&camcc CAM_CC_SLOW_AHB_CLK_SRC>, + <&camcc CAM_CC_CPAS_AHB_CLK>, + <&camcc CAM_CC_CCI_0_CLK>, + <&camcc CAM_CC_CCI_0_CLK_SRC>; + clock-names = "camnoc_axi", + "slow_ahb_src", + "cpas_ahb", + "cci", + "cci_src"; + + pinctrl-0 = <&cci0_default>; + pinctrl-1 = <&cci0_sleep>; + pinctrl-names = "default", "sleep"; + + status = "disabled"; + + cci0_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci0_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + cci1: cci@ac50000 { + compatible = "qcom,sm8250-cci"; + #address-cells = <1>; + #size-cells = <0>; + + reg = <0 0x0ac50000 0 0x1000>; + interrupts = ; + power-domains = <&camcc TITAN_TOP_GDSC>; + + clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>, + <&camcc CAM_CC_SLOW_AHB_CLK_SRC>, + <&camcc CAM_CC_CPAS_AHB_CLK>, + <&camcc CAM_CC_CCI_1_CLK>, + <&camcc CAM_CC_CCI_1_CLK_SRC>; + clock-names = "camnoc_axi", + "slow_ahb_src", + "cpas_ahb", + "cci", + "cci_src"; + + pinctrl-0 = <&cci1_default>; + pinctrl-1 = <&cci1_sleep>; + pinctrl-names = "default", "sleep"; + + status = "disabled"; + + cci1_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci1_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + camss: camss@ac6a000 { + compatible = "qcom,sm8250-camss"; + status = "disabled"; + + reg = <0 0xac6a000 0 0x2000>, + <0 0xac6c000 0 0x2000>, + <0 0xac6e000 0 0x1000>, + <0 0xac70000 0 0x1000>, + <0 0xac72000 0 0x1000>, + <0 0xac74000 0 0x1000>, + <0 0xacb4000 0 0xd000>, + <0 0xacc3000 0 0xd000>, + <0 0xacd9000 0 0x2200>, + <0 0xacdb200 0 0x2200>; + reg-names = "csiphy0", + "csiphy1", + "csiphy2", + "csiphy3", + "csiphy4", + "csiphy5", + "vfe0", + "vfe1", + "vfe_lite0", + "vfe_lite1"; + + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + ; + interrupt-names = "csiphy0", + "csiphy1", + "csiphy2", + "csiphy3", + "csiphy4", + "csiphy5", + "csid0", + "csid1", + "csid2", + "csid3", + "vfe0", + "vfe1", + "vfe_lite0", + "vfe_lite1"; + + power-domains = <&camcc IFE_0_GDSC>, + <&camcc IFE_1_GDSC>, + <&camcc TITAN_TOP_GDSC>; + + clocks = <&gcc GCC_CAMERA_AHB_CLK>, + <&gcc GCC_CAMERA_HF_AXI_CLK>, + <&gcc GCC_CAMERA_SF_AXI_CLK>, + <&camcc CAM_CC_CAMNOC_AXI_CLK>, + <&camcc CAM_CC_CAMNOC_AXI_CLK_SRC>, + <&camcc CAM_CC_CORE_AHB_CLK>, + <&camcc CAM_CC_CPAS_AHB_CLK>, + <&camcc CAM_CC_CSIPHY0_CLK>, + <&camcc CAM_CC_CSI0PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY1_CLK>, + <&camcc CAM_CC_CSI1PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY2_CLK>, + <&camcc CAM_CC_CSI2PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY3_CLK>, + <&camcc CAM_CC_CSI3PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY4_CLK>, + <&camcc CAM_CC_CSI4PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY5_CLK>, + <&camcc CAM_CC_CSI5PHYTIMER_CLK>, + <&camcc CAM_CC_SLOW_AHB_CLK_SRC>, + <&camcc CAM_CC_IFE_0_AHB_CLK>, + <&camcc CAM_CC_IFE_0_AXI_CLK>, + <&camcc CAM_CC_IFE_0_CLK>, + <&camcc CAM_CC_IFE_0_CPHY_RX_CLK>, + <&camcc CAM_CC_IFE_0_CSID_CLK>, + <&camcc CAM_CC_IFE_0_AREG_CLK>, + <&camcc CAM_CC_IFE_1_AHB_CLK>, + <&camcc CAM_CC_IFE_1_AXI_CLK>, + <&camcc CAM_CC_IFE_1_CLK>, + <&camcc CAM_CC_IFE_1_CPHY_RX_CLK>, + <&camcc CAM_CC_IFE_1_CSID_CLK>, + <&camcc CAM_CC_IFE_1_AREG_CLK>, + <&camcc CAM_CC_IFE_LITE_AHB_CLK>, + <&camcc CAM_CC_IFE_LITE_AXI_CLK>, + <&camcc CAM_CC_IFE_LITE_CLK>, + <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>, + <&camcc CAM_CC_IFE_LITE_CSID_CLK>; + + clock-names = "cam_ahb_clk", + "cam_hf_axi", + "cam_sf_axi", + "camnoc_axi", + "camnoc_axi_src", + "core_ahb", + "cpas_ahb", + "csiphy0", + "csiphy0_timer", + "csiphy1", + "csiphy1_timer", + "csiphy2", + "csiphy2_timer", + "csiphy3", + "csiphy3_timer", + "csiphy4", + "csiphy4_timer", + "csiphy5", + "csiphy5_timer", + "slow_ahb_src", + "vfe0_ahb", + "vfe0_axi", + "vfe0", + "vfe0_cphy_rx", + "vfe0_csid", + "vfe0_areg", + "vfe1_ahb", + "vfe1_axi", + "vfe1", + "vfe1_cphy_rx", + "vfe1_csid", + "vfe1_areg", + "vfe_lite_ahb", + "vfe_lite_axi", + "vfe_lite", + "vfe_lite_cphy_rx", + "vfe_lite_csid"; + + iommus = <&apps_smmu 0x800 0x400>, + <&apps_smmu 0x801 0x400>, + <&apps_smmu 0x840 0x400>, + <&apps_smmu 0x841 0x400>, + <&apps_smmu 0xc00 0x400>, + <&apps_smmu 0xc01 0x400>, + <&apps_smmu 0xc40 0x400>, + <&apps_smmu 0xc41 0x400>; + + interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_CAMERA_CFG>, + <&mmss_noc MASTER_CAMNOC_HF &mc_virt SLAVE_EBI_CH0>, + <&mmss_noc MASTER_CAMNOC_SF &mc_virt SLAVE_EBI_CH0>, + <&mmss_noc MASTER_CAMNOC_ICP &mc_virt SLAVE_EBI_CH0>; + interconnect-names = "cam_ahb", + "cam_hf_0_mnoc", + "cam_sf_0_mnoc", + "cam_sf_icp_mnoc"; + }; + + camcc: clock-controller@ad00000 { + compatible = "qcom,sm8250-camcc"; + reg = <0 0x0ad00000 0 0x10000>; + clocks = <&gcc GCC_CAMERA_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>; + clock-names = "iface", "bi_tcxo", "bi_tcxo_ao", "sleep_clk"; + power-domains = <&rpmhpd SM8250_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + status = "disabled"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + mdss: mdss@ae00000 { + compatible = "qcom,sm8250-mdss"; + reg = <0 0x0ae00000 0 0x1000>; + reg-names = "mdss"; + + interconnects = <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>, + <&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>; + interconnect-names = "mdp0-mem", "mdp1-mem"; + + power-domains = <&dispcc MDSS_GDSC>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "bus", "nrt_bus", "core"; + + interrupts = ; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x820 0x402>; + + status = "disabled"; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + mdss_mdp: display-controller@ae01000 { + compatible = "qcom,sm8250-dpu"; + reg = <0 0x0ae01000 0 0x8f000>, + <0 0x0aeb0000 0 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "iface", "bus", "core", "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd SM8250_MMCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-345000000 { + opp-hz = /bits/ 64 <345000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-460000000 { + opp-hz = /bits/ 64 <460000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + dsi0: dsi@ae94000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae94000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SM8250_MMCX>; + + phys = <&dsi0_phy>; + phy-names = "dsi"; + + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + + dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + dsi0_phy: dsi-phy@ae94400 { + compatible = "qcom,dsi-phy-7nm"; + reg = <0 0x0ae94400 0 0x200>, + <0 0x0ae94600 0 0x280>, + <0 0x0ae94900 0 0x260>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + + dsi1: dsi@ae96000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae96000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, + <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK>, + <&dispcc DISP_CC_MDSS_ESC1_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; + assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SM8250_MMCX>; + + phys = <&dsi1_phy>; + phy-names = "dsi"; + + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi1_in: endpoint { + remote-endpoint = <&dpu_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + dsi1_out: endpoint { + }; + }; + }; + }; + + dsi1_phy: dsi-phy@ae96400 { + compatible = "qcom,dsi-phy-7nm"; + reg = <0 0x0ae96400 0 0x200>, + <0 0x0ae96600 0 0x280>, + <0 0x0ae96900 0 0x260>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + }; + + dispcc: clock-controller@af00000 { + compatible = "qcom,sm8250-dispcc"; + reg = <0 0x0af00000 0 0x10000>; + power-domains = <&rpmhpd SM8250_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&dsi0_phy 0>, + <&dsi0_phy 1>, + <&dsi1_phy 0>, + <&dsi1_phy 1>, + <&dp_phy 0>, + <&dp_phy 1>; + clock-names = "bi_tcxo", + "dsi0_phy_pll_out_byteclk", + "dsi0_phy_pll_out_dsiclk", + "dsi1_phy_pll_out_byteclk", + "dsi1_phy_pll_out_dsiclk", + "dp_phy_pll_link_clk", + "dp_phy_pll_vco_div_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,sm8250-pdc", "qcom,pdc"; + reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>; + qcom,pdc-ranges = <0 480 94>, <94 609 31>, + <125 63 1>, <126 716 12>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + tsens0: thermal-sensor@c263000 { + compatible = "qcom,sm8250-tsens", "qcom,tsens-v2"; + reg = <0 0x0c263000 0 0x1ff>, /* TM */ + <0 0x0c222000 0 0x1ff>; /* SROT */ + #qcom,sensors = <16>; + interrupts = , + ; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c265000 { + compatible = "qcom,sm8250-tsens", "qcom,tsens-v2"; + reg = <0 0x0c265000 0 0x1ff>, /* TM */ + <0 0x0c223000 0 0x1ff>; /* SROT */ + #qcom,sensors = <9>; + interrupts = , + ; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + aoss_qmp: power-controller@c300000 { + compatible = "qcom,sm8250-aoss-qmp", "qcom,aoss-qmp"; + reg = <0 0x0c300000 0 0x400>; + interrupts-extended = <&ipcc IPCC_CLIENT_AOP + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_AOP + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + #clock-cells = <0>; + }; + + sram@c3f0000 { + compatible = "qcom,rpmh-stats"; + reg = <0 0x0c3f0000 0 0x400>; + }; + + spmi_bus: spmi@c440000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0 0x0c440000 0x0 0x0001100>, + <0x0 0x0c600000 0x0 0x2000000>, + <0x0 0x0e600000 0x0 0x0100000>, + <0x0 0x0e700000 0x0 0x00a0000>, + <0x0 0x0c40a000 0x0 0x0026000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + tlmm: pinctrl@f100000 { + compatible = "qcom,sm8250-pinctrl"; + reg = <0 0x0f100000 0 0x300000>, + <0 0x0f500000 0 0x300000>, + <0 0x0f900000 0 0x300000>; + reg-names = "west", "south", "north"; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 181>; + wakeup-parent = <&pdc>; + + cci0_default: cci0-default { + cci0_i2c0_default: cci0-i2c0-default { + /* SDA, SCL */ + pins = "gpio101", "gpio102"; + function = "cci_i2c"; + + bias-pull-up; + drive-strength = <2>; /* 2 mA */ + }; + + cci0_i2c1_default: cci0-i2c1-default { + /* SDA, SCL */ + pins = "gpio103", "gpio104"; + function = "cci_i2c"; + + bias-pull-up; + drive-strength = <2>; /* 2 mA */ + }; + }; + + cci0_sleep: cci0-sleep { + cci0_i2c0_sleep: cci0-i2c0-sleep { + /* SDA, SCL */ + pins = "gpio101", "gpio102"; + function = "cci_i2c"; + + drive-strength = <2>; /* 2 mA */ + bias-pull-down; + }; + + cci0_i2c1_sleep: cci0-i2c1-sleep { + /* SDA, SCL */ + pins = "gpio103", "gpio104"; + function = "cci_i2c"; + + drive-strength = <2>; /* 2 mA */ + bias-pull-down; + }; + }; + + cci1_default: cci1-default { + cci1_i2c0_default: cci1-i2c0-default { + /* SDA, SCL */ + pins = "gpio105","gpio106"; + function = "cci_i2c"; + + bias-pull-up; + drive-strength = <2>; /* 2 mA */ + }; + + cci1_i2c1_default: cci1-i2c1-default { + /* SDA, SCL */ + pins = "gpio107","gpio108"; + function = "cci_i2c"; + + bias-pull-up; + drive-strength = <2>; /* 2 mA */ + }; + }; + + cci1_sleep: cci1-sleep { + cci1_i2c0_sleep: cci1-i2c0-sleep { + /* SDA, SCL */ + pins = "gpio105","gpio106"; + function = "cci_i2c"; + + bias-pull-down; + drive-strength = <2>; /* 2 mA */ + }; + + cci1_i2c1_sleep: cci1-i2c1-sleep { + /* SDA, SCL */ + pins = "gpio107","gpio108"; + function = "cci_i2c"; + + bias-pull-down; + drive-strength = <2>; /* 2 mA */ + }; + }; + + pri_mi2s_active: pri-mi2s-active { + sclk { + pins = "gpio138"; + function = "mi2s0_sck"; + drive-strength = <8>; + bias-disable; + }; + + ws { + pins = "gpio141"; + function = "mi2s0_ws"; + drive-strength = <8>; + output-high; + }; + + data0 { + pins = "gpio139"; + function = "mi2s0_data0"; + drive-strength = <8>; + bias-disable; + output-high; + }; + + data1 { + pins = "gpio140"; + function = "mi2s0_data1"; + drive-strength = <8>; + output-high; + }; + }; + + qup_i2c0_default: qup-i2c0-default { + mux { + pins = "gpio28", "gpio29"; + function = "qup0"; + }; + + config { + pins = "gpio28", "gpio29"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_i2c1_default: qup-i2c1-default { + pinmux { + pins = "gpio4", "gpio5"; + function = "qup1"; + }; + + config { + pins = "gpio4", "gpio5"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_i2c2_default: qup-i2c2-default { + mux { + pins = "gpio115", "gpio116"; + function = "qup2"; + }; + + config { + pins = "gpio115", "gpio116"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_i2c3_default: qup-i2c3-default { + mux { + pins = "gpio119", "gpio120"; + function = "qup3"; + }; + + config { + pins = "gpio119", "gpio120"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_i2c4_default: qup-i2c4-default { + mux { + pins = "gpio8", "gpio9"; + function = "qup4"; + }; + + config { + pins = "gpio8", "gpio9"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_i2c5_default: qup-i2c5-default { + mux { + pins = "gpio12", "gpio13"; + function = "qup5"; + }; + + config { + pins = "gpio12", "gpio13"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_i2c6_default: qup-i2c6-default { + mux { + pins = "gpio16", "gpio17"; + function = "qup6"; + }; + + config { + pins = "gpio16", "gpio17"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_i2c7_default: qup-i2c7-default { + mux { + pins = "gpio20", "gpio21"; + function = "qup7"; + }; + + config { + pins = "gpio20", "gpio21"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_i2c8_default: qup-i2c8-default { + mux { + pins = "gpio24", "gpio25"; + function = "qup8"; + }; + + config { + pins = "gpio24", "gpio25"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_i2c9_default: qup-i2c9-default { + mux { + pins = "gpio125", "gpio126"; + function = "qup9"; + }; + + config { + pins = "gpio125", "gpio126"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_i2c10_default: qup-i2c10-default { + mux { + pins = "gpio129", "gpio130"; + function = "qup10"; + }; + + config { + pins = "gpio129", "gpio130"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_i2c11_default: qup-i2c11-default { + mux { + pins = "gpio60", "gpio61"; + function = "qup11"; + }; + + config { + pins = "gpio60", "gpio61"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_i2c12_default: qup-i2c12-default { + mux { + pins = "gpio32", "gpio33"; + function = "qup12"; + }; + + config { + pins = "gpio32", "gpio33"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_i2c13_default: qup-i2c13-default { + mux { + pins = "gpio36", "gpio37"; + function = "qup13"; + }; + + config { + pins = "gpio36", "gpio37"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_i2c14_default: qup-i2c14-default { + mux { + pins = "gpio40", "gpio41"; + function = "qup14"; + }; + + config { + pins = "gpio40", "gpio41"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_i2c15_default: qup-i2c15-default { + mux { + pins = "gpio44", "gpio45"; + function = "qup15"; + }; + + config { + pins = "gpio44", "gpio45"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_i2c16_default: qup-i2c16-default { + mux { + pins = "gpio48", "gpio49"; + function = "qup16"; + }; + + config { + pins = "gpio48", "gpio49"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_i2c17_default: qup-i2c17-default { + mux { + pins = "gpio52", "gpio53"; + function = "qup17"; + }; + + config { + pins = "gpio52", "gpio53"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_i2c18_default: qup-i2c18-default { + mux { + pins = "gpio56", "gpio57"; + function = "qup18"; + }; + + config { + pins = "gpio56", "gpio57"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_i2c19_default: qup-i2c19-default { + mux { + pins = "gpio0", "gpio1"; + function = "qup19"; + }; + + config { + pins = "gpio0", "gpio1"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_spi0_cs: qup-spi0-cs { + pins = "gpio31"; + function = "qup0"; + }; + + qup_spi0_cs_gpio: qup-spi0-cs-gpio { + pins = "gpio31"; + function = "gpio"; + }; + + qup_spi0_data_clk: qup-spi0-data-clk { + pins = "gpio28", "gpio29", + "gpio30"; + function = "qup0"; + }; + + qup_spi1_cs: qup-spi1-cs { + pins = "gpio7"; + function = "qup1"; + }; + + qup_spi1_cs_gpio: qup-spi1-cs-gpio { + pins = "gpio7"; + function = "gpio"; + }; + + qup_spi1_data_clk: qup-spi1-data-clk { + pins = "gpio4", "gpio5", + "gpio6"; + function = "qup1"; + }; + + qup_spi2_cs: qup-spi2-cs { + pins = "gpio118"; + function = "qup2"; + }; + + qup_spi2_cs_gpio: qup-spi2-cs-gpio { + pins = "gpio118"; + function = "gpio"; + }; + + qup_spi2_data_clk: qup-spi2-data-clk { + pins = "gpio115", "gpio116", + "gpio117"; + function = "qup2"; + }; + + qup_spi3_cs: qup-spi3-cs { + pins = "gpio122"; + function = "qup3"; + }; + + qup_spi3_cs_gpio: qup-spi3-cs-gpio { + pins = "gpio122"; + function = "gpio"; + }; + + qup_spi3_data_clk: qup-spi3-data-clk { + pins = "gpio119", "gpio120", + "gpio121"; + function = "qup3"; + }; + + qup_spi4_cs: qup-spi4-cs { + pins = "gpio11"; + function = "qup4"; + }; + + qup_spi4_cs_gpio: qup-spi4-cs-gpio { + pins = "gpio11"; + function = "gpio"; + }; + + qup_spi4_data_clk: qup-spi4-data-clk { + pins = "gpio8", "gpio9", + "gpio10"; + function = "qup4"; + }; + + qup_spi5_cs: qup-spi5-cs { + pins = "gpio15"; + function = "qup5"; + }; + + qup_spi5_cs_gpio: qup-spi5-cs-gpio { + pins = "gpio15"; + function = "gpio"; + }; + + qup_spi5_data_clk: qup-spi5-data-clk { + pins = "gpio12", "gpio13", + "gpio14"; + function = "qup5"; + }; + + qup_spi6_cs: qup-spi6-cs { + pins = "gpio19"; + function = "qup6"; + }; + + qup_spi6_cs_gpio: qup-spi6-cs-gpio { + pins = "gpio19"; + function = "gpio"; + }; + + qup_spi6_data_clk: qup-spi6-data-clk { + pins = "gpio16", "gpio17", + "gpio18"; + function = "qup6"; + }; + + qup_spi7_cs: qup-spi7-cs { + pins = "gpio23"; + function = "qup7"; + }; + + qup_spi7_cs_gpio: qup-spi7-cs-gpio { + pins = "gpio23"; + function = "gpio"; + }; + + qup_spi7_data_clk: qup-spi7-data-clk { + pins = "gpio20", "gpio21", + "gpio22"; + function = "qup7"; + }; + + qup_spi8_cs: qup-spi8-cs { + pins = "gpio27"; + function = "qup8"; + }; + + qup_spi8_cs_gpio: qup-spi8-cs-gpio { + pins = "gpio27"; + function = "gpio"; + }; + + qup_spi8_data_clk: qup-spi8-data-clk { + pins = "gpio24", "gpio25", + "gpio26"; + function = "qup8"; + }; + + qup_spi9_cs: qup-spi9-cs { + pins = "gpio128"; + function = "qup9"; + }; + + qup_spi9_cs_gpio: qup-spi9-cs-gpio { + pins = "gpio128"; + function = "gpio"; + }; + + qup_spi9_data_clk: qup-spi9-data-clk { + pins = "gpio125", "gpio126", + "gpio127"; + function = "qup9"; + }; + + qup_spi10_cs: qup-spi10-cs { + pins = "gpio132"; + function = "qup10"; + }; + + qup_spi10_cs_gpio: qup-spi10-cs-gpio { + pins = "gpio132"; + function = "gpio"; + }; + + qup_spi10_data_clk: qup-spi10-data-clk { + pins = "gpio129", "gpio130", + "gpio131"; + function = "qup10"; + }; + + qup_spi11_cs: qup-spi11-cs { + pins = "gpio63"; + function = "qup11"; + }; + + qup_spi11_cs_gpio: qup-spi11-cs-gpio { + pins = "gpio63"; + function = "gpio"; + }; + + qup_spi11_data_clk: qup-spi11-data-clk { + pins = "gpio60", "gpio61", + "gpio62"; + function = "qup11"; + }; + + qup_spi12_cs: qup-spi12-cs { + pins = "gpio35"; + function = "qup12"; + }; + + qup_spi12_cs_gpio: qup-spi12-cs-gpio { + pins = "gpio35"; + function = "gpio"; + }; + + qup_spi12_data_clk: qup-spi12-data-clk { + pins = "gpio32", "gpio33", + "gpio34"; + function = "qup12"; + }; + + qup_spi13_cs: qup-spi13-cs { + pins = "gpio39"; + function = "qup13"; + }; + + qup_spi13_cs_gpio: qup-spi13-cs-gpio { + pins = "gpio39"; + function = "gpio"; + }; + + qup_spi13_data_clk: qup-spi13-data-clk { + pins = "gpio36", "gpio37", + "gpio38"; + function = "qup13"; + }; + + qup_spi14_cs: qup-spi14-cs { + pins = "gpio43"; + function = "qup14"; + }; + + qup_spi14_cs_gpio: qup-spi14-cs-gpio { + pins = "gpio43"; + function = "gpio"; + }; + + qup_spi14_data_clk: qup-spi14-data-clk { + pins = "gpio40", "gpio41", + "gpio42"; + function = "qup14"; + }; + + qup_spi15_cs: qup-spi15-cs { + pins = "gpio47"; + function = "qup15"; + }; + + qup_spi15_cs_gpio: qup-spi15-cs-gpio { + pins = "gpio47"; + function = "gpio"; + }; + + qup_spi15_data_clk: qup-spi15-data-clk { + pins = "gpio44", "gpio45", + "gpio46"; + function = "qup15"; + }; + + qup_spi16_cs: qup-spi16-cs { + pins = "gpio51"; + function = "qup16"; + }; + + qup_spi16_cs_gpio: qup-spi16-cs-gpio { + pins = "gpio51"; + function = "gpio"; + }; + + qup_spi16_data_clk: qup-spi16-data-clk { + pins = "gpio48", "gpio49", + "gpio50"; + function = "qup16"; + }; + + qup_spi17_cs: qup-spi17-cs { + pins = "gpio55"; + function = "qup17"; + }; + + qup_spi17_cs_gpio: qup-spi17-cs-gpio { + pins = "gpio55"; + function = "gpio"; + }; + + qup_spi17_data_clk: qup-spi17-data-clk { + pins = "gpio52", "gpio53", + "gpio54"; + function = "qup17"; + }; + + qup_spi18_cs: qup-spi18-cs { + pins = "gpio59"; + function = "qup18"; + }; + + qup_spi18_cs_gpio: qup-spi18-cs-gpio { + pins = "gpio59"; + function = "gpio"; + }; + + qup_spi18_data_clk: qup-spi18-data-clk { + pins = "gpio56", "gpio57", + "gpio58"; + function = "qup18"; + }; + + qup_spi19_cs: qup-spi19-cs { + pins = "gpio3"; + function = "qup19"; + }; + + qup_spi19_cs_gpio: qup-spi19-cs-gpio { + pins = "gpio3"; + function = "gpio"; + }; + + qup_spi19_data_clk: qup-spi19-data-clk { + pins = "gpio0", "gpio1", + "gpio2"; + function = "qup19"; + }; + + qup_uart2_default: qup-uart2-default { + mux { + pins = "gpio117", "gpio118"; + function = "qup2"; + }; + }; + + qup_uart6_default: qup-uart6-default { + mux { + pins = "gpio16", "gpio17", + "gpio18", "gpio19"; + function = "qup6"; + }; + }; + + qup_uart12_default: qup-uart12-default { + mux { + pins = "gpio34", "gpio35"; + function = "qup12"; + }; + }; + + qup_uart17_default: qup-uart17-default { + mux { + pins = "gpio52", "gpio53", + "gpio54", "gpio55"; + function = "qup17"; + }; + }; + + qup_uart18_default: qup-uart18-default { + mux { + pins = "gpio58", "gpio59"; + function = "qup18"; + }; + }; + + tert_mi2s_active: tert-mi2s-active { + sck { + pins = "gpio133"; + function = "mi2s2_sck"; + drive-strength = <8>; + bias-disable; + }; + + data0 { + pins = "gpio134"; + function = "mi2s2_data0"; + drive-strength = <8>; + bias-disable; + output-high; + }; + + ws { + pins = "gpio135"; + function = "mi2s2_ws"; + drive-strength = <8>; + output-high; + }; + }; + + sdc2_sleep_state: sdc2-sleep { + clk { + pins = "sdc2_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd { + pins = "sdc2_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data { + pins = "sdc2_data"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie0_default_state: pcie0-default { + perst { + pins = "gpio79"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq { + pins = "gpio80"; + function = "pci_e0"; + drive-strength = <2>; + bias-pull-up; + }; + + wake { + pins = "gpio81"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie1_default_state: pcie1-default { + perst { + pins = "gpio82"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq { + pins = "gpio83"; + function = "pci_e1"; + drive-strength = <2>; + bias-pull-up; + }; + + wake { + pins = "gpio84"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie2_default_state: pcie2-default { + perst { + pins = "gpio85"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq { + pins = "gpio86"; + function = "pci_e2"; + drive-strength = <2>; + bias-pull-up; + }; + + wake { + pins = "gpio87"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,sm8250-smmu-500", "arm,mmu-500"; + reg = <0 0x15000000 0 0x100000>; + #iommu-cells = <2>; + #global-interrupts = <2>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + }; + + adsp: remoteproc@17300000 { + compatible = "qcom,sm8250-adsp-pas"; + reg = <0 0x17300000 0 0x100>; + + interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SM8250_LCX>, + <&rpmhpd SM8250_LMX>; + power-domain-names = "lcx", "lmx"; + + memory-region = <&adsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "lpass"; + qcom,remote-pid = <2>; + + apr { + compatible = "qcom,apr-v2"; + qcom,glink-channels = "apr_audio_svc"; + qcom,domain = ; + #address-cells = <1>; + #size-cells = <0>; + + apr-service@3 { + reg = ; + compatible = "qcom,q6core"; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + }; + + q6afe: apr-service@4 { + compatible = "qcom,q6afe"; + reg = ; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + q6afedai: dais { + compatible = "qcom,q6afe-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + }; + + q6afecc: cc { + compatible = "qcom,q6afe-clocks"; + #clock-cells = <2>; + }; + }; + + q6asm: apr-service@7 { + compatible = "qcom,q6asm"; + reg = ; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + q6asmdai: dais { + compatible = "qcom,q6asm-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + iommus = <&apps_smmu 0x1801 0x0>; + }; + }; + + q6adm: apr-service@8 { + compatible = "qcom,q6adm"; + reg = ; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + q6routing: routing { + compatible = "qcom,q6adm-routing"; + #sound-dai-cells = <0>; + }; + }; + }; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "adsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1803 0x0>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1804 0x0>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x1805 0x0>; + }; + }; + }; + }; + + intc: interrupt-controller@17a00000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */ + <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */ + interrupts = ; + }; + + watchdog@17c10000 { + compatible = "qcom,apss-wdt-sm8250", "qcom,kpss-wdt"; + reg = <0 0x17c10000 0 0x1000>; + clocks = <&sleep_clk>; + interrupts = ; + }; + + timer@17c20000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0x20000000>; + compatible = "arm,armv7-timer-mem"; + reg = <0x0 0x17c20000 0x0 0x1000>; + clock-frequency = <19200000>; + + frame@17c21000 { + frame-number = <0>; + interrupts = , + ; + reg = <0x17c21000 0x1000>, + <0x17c22000 0x1000>; + }; + + frame@17c23000 { + frame-number = <1>; + interrupts = ; + reg = <0x17c23000 0x1000>; + status = "disabled"; + }; + + frame@17c25000 { + frame-number = <2>; + interrupts = ; + reg = <0x17c25000 0x1000>; + status = "disabled"; + }; + + frame@17c27000 { + frame-number = <3>; + interrupts = ; + reg = <0x17c27000 0x1000>; + status = "disabled"; + }; + + frame@17c29000 { + frame-number = <4>; + interrupts = ; + reg = <0x17c29000 0x1000>; + status = "disabled"; + }; + + frame@17c2b000 { + frame-number = <5>; + interrupts = ; + reg = <0x17c2b000 0x1000>; + status = "disabled"; + }; + + frame@17c2d000 { + frame-number = <6>; + interrupts = ; + reg = <0x17c2d000 0x1000>; + status = "disabled"; + }; + }; + + apps_rsc: rsc@18200000 { + label = "apps_rsc"; + compatible = "qcom,rpmh-rsc"; + reg = <0x0 0x18200000 0x0 0x10000>, + <0x0 0x18210000 0x0 0x10000>, + <0x0 0x18220000 0x0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = , + , + ; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = , , + , ; + + rpmhcc: clock-controller { + compatible = "qcom,sm8250-rpmh-clk"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board>; + }; + + rpmhpd: power-controller { + compatible = "qcom,sm8250-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = ; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = ; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = ; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = ; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = ; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = ; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = ; + }; + + rpmhpd_opp_nom_l2: opp8 { + opp-level = ; + }; + + rpmhpd_opp_turbo: opp9 { + opp-level = ; + }; + + rpmhpd_opp_turbo_l1: opp10 { + opp-level = ; + }; + }; + }; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + }; + + epss_l3: interconnect@18590000 { + compatible = "qcom,sm8250-epss-l3"; + reg = <0 0x18590000 0 0x1000>; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + + #interconnect-cells = <1>; + }; + + cpufreq_hw: cpufreq@18591000 { + compatible = "qcom,sm8250-cpufreq-epss", "qcom,cpufreq-epss"; + reg = <0 0x18591000 0 0x1000>, + <0 0x18592000 0 0x1000>, + <0 0x18593000 0 0x1000>; + reg-names = "freq-domain0", "freq-domain1", + "freq-domain2"; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + interrupts = , + , + ; + interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1", "dcvsh-irq-2"; + #freq-domain-cells = <1>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; + + thermal-zones { + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 1>; + + trips { + cpu0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu0_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu0_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 2>; + + trips { + cpu1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu1_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu1_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 3>; + + trips { + cpu2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu2_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu2_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 4>; + + trips { + cpu3_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu3_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu3_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu4-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 7>; + + trips { + cpu4_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_top_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu4_top_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu4_top_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu5-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 8>; + + trips { + cpu5_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_top_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu5_top_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu5_top_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu6-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 9>; + + trips { + cpu6_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_top_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu6_top_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu6_top_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu7-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 10>; + + trips { + cpu7_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_top_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu7_top_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu7_top_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu4-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 11>; + + trips { + cpu4_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_bottom_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu4_bottom_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu4_bottom_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu5-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 12>; + + trips { + cpu5_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_bottom_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu5_bottom_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu5_bottom_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu6-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 13>; + + trips { + cpu6_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_bottom_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu6_bottom_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu6_bottom_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu7-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 14>; + + trips { + cpu7_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_bottom_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu7_bottom_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu7_bottom_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + aoss0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 0>; + + trips { + aoss0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + cluster0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 5>; + + trips { + cluster0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + cluster0_crit: cluster0_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cluster1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 6>; + + trips { + cluster1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + cluster1_crit: cluster1_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + gpu-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 15>; + + trips { + gpu1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + aoss1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 0>; + + trips { + aoss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + wlan-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 1>; + + trips { + wlan_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 2>; + + trips { + video_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + mem-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 3>; + + trips { + mem_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + q6-hvx-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 4>; + + trips { + q6_hvx_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + camera-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 5>; + + trips { + camera_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + compute-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 6>; + + trips { + compute_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + npu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 7>; + + trips { + npu_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + gpu-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 8>; + + trips { + gpu2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts new file mode 100644 index 000000000..69ae6503c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts @@ -0,0 +1,332 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020-2021, Linaro Limited + */ + +/dts-v1/; + +#include +#include "sm8350.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SM8350 HDK"; + compatible = "qcom,sm8350-hdk", "qcom,sm8350"; + + aliases { + serial0 = &uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&adsp { + status = "okay"; + firmware-name = "qcom/sm8350/adsp.mbn"; +}; + +&apps_rsc { + pm8350-rpmh-regulators { + compatible = "qcom,pm8350-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + + vdd-l1-l4-supply = <&vreg_s11b_0p95>; + vdd-l2-l7-supply = <&vreg_bob>; + vdd-l3-l5-supply = <&vreg_bob>; + vdd-l6-l9-l10-supply = <&vreg_s11b_0p95>; + + vreg_s10b_1p8: smps10 { + regulator-name = "vreg_s10b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_s11b_0p95: smps11 { + regulator-name = "vreg_s11b_0p95"; + regulator-min-microvolt = <952000>; + regulator-max-microvolt = <952000>; + regulator-initial-mode = ; + }; + + vreg_s12b_1p25: smps12 { + regulator-name = "vreg_s12b_1p25"; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1256000>; + regulator-initial-mode = ; + }; + + vreg_l1b_0p88: ldo1 { + regulator-name = "vreg_l1b_0p88"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = ; + }; + + vreg_l2b_3p07: ldo2 { + regulator-name = "vreg_l2b_3p07"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + }; + + vreg_l3b_0p9: ldo3 { + regulator-name = "vreg_l3b_0p9"; + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <904000>; + regulator-initial-mode = ; + }; + + vreg_l5b_0p88: ldo5 { + regulator-name = "vreg_l5b_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <888000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = + ; + }; + + vreg_l6b_1p2: ldo6 { + regulator-name = "vreg_l6b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1208000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = + ; + }; + + vreg_l7b_2p96: ldo7 { + regulator-name = "vreg_l7b_2p96"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = + ; + }; + + vreg_l9b_1p2: ldo9 { + regulator-name = "vreg_l9b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = + ; + }; + }; + + pm8350c-rpmh-regulators { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l12-supply = <&vreg_s1c_1p86>; + vdd-l2-l8-supply = <&vreg_s1c_1p86>; + vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>; + vdd-l6-l9-l11-supply = <&vreg_bob>; + vdd-l10-supply = <&vreg_s12b_1p25>; + + vdd-bob-supply = <&vph_pwr>; + + vreg_s1c_1p86: smps1 { + regulator-name = "vreg_s1c_1p86"; + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <1880000>; + regulator-initial-mode = ; + }; + + vreg_bob: bob { + regulator-name = "vreg_bob"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = ; + }; + + vreg_l1c_1p8: ldo1 { + regulator-name = "vreg_l1c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l2c_1p8: ldo2 { + regulator-name = "vreg_l2c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l6c_1p8: ldo6 { + regulator-name = "vreg_l6c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l9c_2p96: ldo9 { + regulator-name = "vreg_l9c_2p96"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l10c_1p2: ldo10 { + regulator-name = "vreg_l10c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + }; +}; + +&cdsp { + status = "okay"; + firmware-name = "qcom/sm8350/cdsp.mbn"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&mpss { + status = "okay"; + firmware-name = "qcom/sm8350/modem.mbn"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&slpi { + status = "okay"; + firmware-name = "qcom/sm8350/slpi.mbn"; +}; + +&tlmm { + gpio-reserved-ranges = <52 8>; +}; + +&uart2 { + status = "okay"; +}; + +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 203 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l7b_2p96>; + vcc-max-microamp = <800000>; + vccq-supply = <&vreg_l9b_1p2>; + vccq-max-microamp = <900000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l5b_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + /* TODO: Define USB-C connector properly */ + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdda-pll-supply = <&vreg_l5b_0p88>; + vdda18-supply = <&vreg_l1c_1p8>; + vdda33-supply = <&vreg_l2b_3p07>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l6b_1p2>; + vdda-pll-supply = <&vreg_l1b_0p88>; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; + + pinctrl-names = "default"; + pinctrl-0 = <&usb_hub_enabled_state>; +}; + +&usb_2_hsphy { + status = "okay"; + + vdda-pll-supply = <&vreg_l5b_0p88>; + vdda18-supply = <&vreg_l1c_1p8>; + vdda33-supply = <&vreg_l2b_3p07>; +}; + +&usb_2_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l6b_1p2>; + vdda-pll-supply = <&vreg_l5b_0p88>; +}; + +/* PINCTRL - additions to nodes defined in sm8350.dtsi */ + +&tlmm { + usb_hub_enabled_state: usb-hub-enabled-state { + pins = "gpio42"; + function = "gpio"; + + drive-strength = <2>; + output-low; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts b/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts new file mode 100644 index 000000000..e87514d8f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts @@ -0,0 +1,382 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (C) 2021, Microsoft Corporation + */ + +/dts-v1/; + +#include +#include "sm8350.dtsi" +#include "pm8350.dtsi" +#include "pm8350b.dtsi" +#include "pm8350c.dtsi" +#include "pmk8350.dtsi" +#include "pmr735a.dtsi" +#include "pmr735b.dtsi" + +/ { + model = "Microsoft Surface Duo 2"; + compatible = "microsoft,surface-duo2", "qcom,sm8350"; + chassis-type = "handset"; + + aliases { + serial0 = &uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&adsp { + status = "okay"; + firmware-name = "qcom/sm8350/microsoft/adsp.mbn"; +}; + +&apps_rsc { + pm8350-rpmh-regulators { + compatible = "qcom,pm8350-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + + vdd-l1-l4-supply = <&vreg_s11b_0p95>; + vdd-l2-l7-supply = <&vreg_bob>; + vdd-l3-l5-supply = <&vreg_bob>; + vdd-l6-l9-l10-supply = <&vreg_s11b_0p95>; + vdd-l8-supply = <&vreg_s2c_0p8>; + + vreg_s10b_1p8: smps10 { + regulator-name = "vreg_s10b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_s11b_0p95: smps11 { + regulator-name = "vreg_s11b_0p95"; + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_s12b_1p25: smps12 { + regulator-name = "vreg_s12b_1p25"; + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1360000>; + }; + + vreg_l1b_0p88: ldo1 { + regulator-name = "vreg_l1b_0p88"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = ; + }; + + vreg_l2b_3p07: ldo2 { + regulator-name = "vreg_l2b_3p07"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + }; + + vreg_l3b_0p9: ldo3 { + regulator-name = "vreg_l3b_0p9"; + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <904000>; + regulator-initial-mode = ; + }; + + vreg_l5b_0p88: ldo5 { + regulator-name = "vreg_l3b_0p9"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <888000>; + regulator-initial-mode = ; + }; + + vreg_l6b_1p2: ldo6 { + regulator-name = "vreg_l6b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1208000>; + regulator-initial-mode = ; + }; + + vreg_l7b_2p96: ldo7 { + regulator-name = "vreg_l7b_2p96"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l9b_1p2: ldo9 { + regulator-name = "vreg_l9b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + }; + + pm8350c-rpmh-regulators { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l12-supply = <&vreg_s1c_1p86>; + vdd-l2-l8-supply = <&vreg_s1c_1p86>; + vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>; + vdd-l6-l9-l11-supply = <&vreg_bob>; + vdd-l10-supply = <&vreg_s12b_1p25>; + + vdd-bob-supply = <&vph_pwr>; + + vreg_s1c_1p86: smps1 { + regulator-name = "vreg_s1c_1p86"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1952000>; + }; + + vreg_s2c_0p8: smps2 { + regulator-name = "vreg_s2c_0p8"; + regulator-min-microvolt = <640000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_s10c_1p05: smps10 { + regulator-name = "vreg_s10c_1p05"; + regulator-min-microvolt = <1048000>; + regulator-max-microvolt = <1128000>; + }; + + vreg_bob: bob { + regulator-name = "vreg_bob"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = ; + }; + + vreg_l1c_1p8: ldo1 { + regulator-name = "vreg_l1c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l2c_1p8: ldo2 { + regulator-name = "vreg_l2c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l3c_3p0: ldo3 { + regulator-name = "vreg_l3c_3p0"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l4c_uim1: ldo4 { + regulator-name = "vreg_l4c_uim1"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = ; + }; + + vreg_l5c_uim2: ldo5 { + regulator-name = "vreg_l5c_uim2"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = ; + }; + + vreg_l6c_1p8: ldo6 { + regulator-name = "vreg_l6c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l7c_3p0: ldo7 { + regulator-name = "vreg_l7c_3p0"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l8c_1p8: ldo8 { + regulator-name = "vreg_l8c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l9c_2p96: ldo9 { + regulator-name = "vreg_l9c_2p96"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l10c_1p2: ldo10 { + regulator-name = "vreg_l10c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l11c_2p96: ldo11 { + regulator-name = "vreg_l11c_2p96"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l12c_1p8: ldo12 { + regulator-name = "vreg_l12c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = ; + }; + + vreg_l13c_3p0: ldo13 { + regulator-name = "vreg_l13c_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = ; + }; + }; +}; + +&cdsp { + status = "okay"; + firmware-name = "qcom/sm8350/microsoft/cdsp.mbn"; +}; + +&i2c10 { + status = "okay"; +}; + +&i2c11 { + status = "okay"; +}; + +&ipa { + status = "okay"; + + memory-region = <&pil_ipa_fw_mem>; +}; + +&mpss { + status = "okay"; + firmware-name = "qcom/sm8350/microsoft/modem.mbn"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&slpi { + status = "okay"; + firmware-name = "qcom/sm8350/microsoft/slpi.mbn"; +}; + +&tlmm { + gpio-reserved-ranges = <4 4>, <12 4>, <56 4>, <76 4>; +}; + +&uart2 { + status = "okay"; +}; + +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 203 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l7b_2p96>; + vcc-max-microamp = <800000>; + vccq-supply = <&vreg_l9b_1p2>; + vccq-max-microamp = <900000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l5b_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdda-pll-supply = <&vreg_l5b_0p88>; + vdda18-supply = <&vreg_l1c_1p8>; + vdda33-supply = <&vreg_l2b_3p07>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l6b_1p2>; + vdda-pll-supply = <&vreg_l1b_0p88>; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_hsphy { + status = "okay"; + + vdda-pll-supply = <&vreg_l5b_0p88>; + vdda18-supply = <&vreg_l1c_1p8>; + vdda33-supply = <&vreg_l2b_3p07>; +}; + +&usb_2_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l6b_1p2>; + vdda-pll-supply = <&vreg_l5b_0p88>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8350-mtp.dts b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts new file mode 100644 index 000000000..52cf30456 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts @@ -0,0 +1,382 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Linaro Limited + */ + +/dts-v1/; + +#include +#include "sm8350.dtsi" +#include "pm8350.dtsi" +#include "pm8350b.dtsi" +#include "pm8350c.dtsi" +#include "pmk8350.dtsi" +#include "pmr735a.dtsi" +#include "pmr735b.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. sm8350 MTP"; + compatible = "qcom,sm8350-mtp", "qcom,sm8350"; + + aliases { + serial0 = &uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&adsp { + status = "okay"; + firmware-name = "qcom/sm8350/adsp.mbn"; +}; + +&apps_rsc { + pm8350-rpmh-regulators { + compatible = "qcom,pm8350-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + + vdd-l1-l4-supply = <&vreg_s11b_0p95>; + vdd-l2-l7-supply = <&vreg_bob>; + vdd-l3-l5-supply = <&vreg_bob>; + vdd-l6-l9-l10-supply = <&vreg_s11b_0p95>; + vdd-l8-supply = <&vreg_s2c_0p8>; + + vreg_s10b_1p8: smps10 { + regulator-name = "vreg_s10b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_s11b_0p95: smps11 { + regulator-name = "vreg_s11b_0p95"; + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_s12b_1p25: smps12 { + regulator-name = "vreg_s12b_1p25"; + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1360000>; + }; + + vreg_l1b_0p88: ldo1 { + regulator-name = "vreg_l1b_0p88"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = ; + }; + + vreg_l2b_3p07: ldo2 { + regulator-name = "vreg_l2b_3p07"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + }; + + vreg_l3b_0p9: ldo3 { + regulator-name = "vreg_l3b_0p9"; + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <904000>; + regulator-initial-mode = ; + }; + + vreg_l5b_0p88: ldo5 { + regulator-name = "vreg_l3b_0p9"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <888000>; + regulator-initial-mode = ; + }; + + vreg_l6b_1p2: ldo6 { + regulator-name = "vreg_l6b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1208000>; + regulator-initial-mode = ; + }; + + vreg_l7b_2p96: ldo7 { + regulator-name = "vreg_l7b_2p96"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l9b_1p2: ldo9 { + regulator-name = "vreg_l9b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + }; + + pm8350c-rpmh-regulators { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l12-supply = <&vreg_s1c_1p86>; + vdd-l2-l8-supply = <&vreg_s1c_1p86>; + vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>; + vdd-l6-l9-l11-supply = <&vreg_bob>; + vdd-l10-supply = <&vreg_s12b_1p25>; + + vdd-bob-supply = <&vph_pwr>; + + vreg_s1c_1p86: smps1 { + regulator-name = "vreg_s1c_1p86"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1952000>; + }; + + vreg_s2c_0p8: smps2 { + regulator-name = "vreg_s2c_0p8"; + regulator-min-microvolt = <640000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_s10c_1p05: smps10 { + regulator-name = "vreg_s10c_1p05"; + regulator-min-microvolt = <1048000>; + regulator-max-microvolt = <1128000>; + }; + + vreg_bob: bob { + regulator-name = "vreg_bob"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = ; + }; + + vreg_l1c_1p8: ldo1 { + regulator-name = "vreg_l1c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l2c_1p8: ldo2 { + regulator-name = "vreg_l2c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l3c_3p0: ldo3 { + regulator-name = "vreg_l3c_3p0"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l4c_uim1: ldo4 { + regulator-name = "vreg_l4c_uim1"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = ; + }; + + vreg_l5c_uim2: ldo5 { + regulator-name = "vreg_l5c_uim2"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = ; + }; + + vreg_l6c_1p8: ldo6 { + regulator-name = "vreg_l6c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l7c_3p0: ldo7 { + regulator-name = "vreg_l7c_3p0"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l8c_1p8: ldo8 { + regulator-name = "vreg_l8c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l9c_2p96: ldo9 { + regulator-name = "vreg_l9c_2p96"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l10c_1p2: ldo10 { + regulator-name = "vreg_l10c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l11c_2p96: ldo11 { + regulator-name = "vreg_l11c_2p96"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l12c_1p8: ldo12 { + regulator-name = "vreg_l12c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = ; + }; + + vreg_l13c_3p0: ldo13 { + regulator-name = "vreg_l13c_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = ; + }; + }; +}; + +&cdsp { + status = "okay"; + firmware-name = "qcom/sm8350/cdsp.mbn"; +}; + +&mpss { + status = "okay"; + firmware-name = "qcom/sm8350/modem.mbn"; +}; + +&pmk8350_rtc { + status = "okay"; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + status = "okay"; + linux,code = ; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&slpi { + status = "okay"; + firmware-name = "qcom/sm8350/slpi.mbn"; +}; + +&tlmm { + gpio-reserved-ranges = <52 8>; +}; + +&uart2 { + status = "okay"; +}; + +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 203 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l7b_2p96>; + vcc-max-microamp = <800000>; + vccq-supply = <&vreg_l9b_1p2>; + vccq-max-microamp = <900000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l5b_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdda-pll-supply = <&vreg_l5b_0p88>; + vdda18-supply = <&vreg_l1c_1p8>; + vdda33-supply = <&vreg_l2b_3p07>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l6b_1p2>; + vdda-pll-supply = <&vreg_l1b_0p88>; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_hsphy { + status = "okay"; + + vdda-pll-supply = <&vreg_l5b_0p88>; + vdda18-supply = <&vreg_l1c_1p8>; + vdda33-supply = <&vreg_l2b_3p07>; +}; + +&usb_2_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l6b_1p2>; + vdda-pll-supply = <&vreg_l5b_0p88>; +}; + +&ipa { + status = "okay"; + + memory-region = <&pil_ipa_fw_mem>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx214.dts b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx214.dts new file mode 100644 index 000000000..cc650508d --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx214.dts @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio + */ + +/dts-v1/; + +#include "sm8350-sony-xperia-sagami.dtsi" + +/ { + model = "Sony Xperia 5 III"; + compatible = "sony,pdx214-generic", "qcom,sm8350"; +}; + +&framebuffer { + width = <1080>; + height = <2520>; + stride = <(1080 * 4)>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx215.dts b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx215.dts new file mode 100644 index 000000000..d21bbeb60 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx215.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio + */ + +/dts-v1/; + +#include "sm8350-sony-xperia-sagami.dtsi" + +/ { + model = "Sony Xperia 1 III"; + compatible = "sony,pdx215-generic", "qcom,sm8350"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi new file mode 100644 index 000000000..b3c9952ac --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi @@ -0,0 +1,259 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio + */ + +#include "sm8350.dtsi" +#include "pm8350.dtsi" +#include "pm8350b.dtsi" +#include "pm8350c.dtsi" +#include "pmk8350.dtsi" +#include "pmr735a.dtsi" +#include "pmr735b.dtsi" + +/ { + /* + * Yes, you are correct, there is NO MORE {msm,board,pmic}-id on SM8350! + * Adding it will cause the bootloader to go crazy and randomly crash + * shortly after closing UEFI boot services.. Perhaps that has something + * to do with the OS running inside a VM now..? + */ + + chassis-type = "handset"; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer: framebuffer@e1000000 { + compatible = "simple-framebuffer"; + reg = <0 0xe1000000 0 0x2300000>; + + /* The display, even though it's 4K, initializes at 1080-ish p */ + width = <1096>; + height = <2560>; + stride = <(1096 * 4)>; + format = "a8r8g8b8"; + /* + * That's (going to be) a lot of clocks, but it's necessary due + * to unused clk cleanup & no panel driver yet + */ + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + /* For reasons still unknown, GAssist key and Camera Focus/Shutter don't work.. */ + + key-vol-down { + label = "Volume Down"; + linux,code = ; + gpios = <&pmk8350_gpios 3 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + gpio-key,wakeup; + }; + }; + + reserved-memory { + cont_splash_mem: memory@e1000000 { + reg = <0 0xe1000000 0 0x2300000>; + no-map; + }; + + ramoops@ffc00000 { + compatible = "ramoops"; + reg = <0 0xffc00000 0 0x100000>; + console-size = <0x40000>; + record-size = <0x1000>; + no-map; + }; + }; +}; + +&adsp { + status = "okay"; + firmware-name = "qcom/adsp.mbn"; +}; + +&cdsp { + status = "okay"; + firmware-name = "qcom/cdsp.mbn"; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <1000000>; + + /* Some subset of SONY IMX663 camera sensor @ 38 */ +}; + +&i2c2 { + status = "okay"; + clock-frequency = <400000>; + + /* Richwave RTC6226 FM Radio Receiver @ 64 */ +}; + +&i2c4 { + status = "okay"; + clock-frequency = <400000>; + + /* Samsung Touchscreen (needs I2C GPI DMA) @ 48 */ +}; + +&i2c11 { + status = "okay"; + clock-frequency = <1000000>; + + cs35l41_l: cs35l41@40 { + compatible = "cirrus,cs35l41"; + reg = <0x40>; + interrupt-parent = <&tlmm>; + interrupts = <36 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; + cirrus,boost-peak-milliamp = <4000>; + cirrus,boost-ind-nanohenry = <1000>; + cirrus,boost-cap-microfarad = <15>; + cirrus,asp-sdout-hiz = <3>; + cirrus,gpio2-src-select = <2>; + cirrus,gpio2-output-enable; + #sound-dai-cells = <1>; + }; + + cs35l41_r: cs35l41@41 { + compatible = "cirrus,cs35l41"; + reg = <0x41>; + interrupt-parent = <&tlmm>; + interrupts = <36 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; + cirrus,boost-peak-milliamp = <4000>; + cirrus,boost-ind-nanohenry = <1000>; + cirrus,boost-cap-microfarad = <15>; + cirrus,asp-sdout-hiz = <3>; + cirrus,gpio2-src-select = <2>; + cirrus,gpio2-output-enable; + #sound-dai-cells = <1>; + }; +}; + +&i2c12 { + status = "okay"; + /* Clock frequency was not specified downstream, let's park it to 100 KHz */ + clock-frequency = <100000>; + + /* AMS TCS3490 RGB+IR color sensor @ 72 */ +}; + +&i2c13 { + status = "okay"; + /* Clock frequency was not specified downstream, let's park it to 100 KHz */ + clock-frequency = <100000>; + + /* Qualcomm PM8008i/PM8008j (?) @ 8, 9, c, d */ + /* Dialog SLG51000 CMIC @ 75 */ +}; + +&i2c15 { + status = "okay"; + clock-frequency = <400000>; + + /* NXP SN1X0 NFC @ 28 */ +}; + +&i2c17 { + status = "okay"; + clock-frequency = <1000000>; + + /* Cirrus Logic CS40L25A boosted haptics driver @ 40 */ +}; + +&ipa { + status = "okay"; + memory-region = <&pil_ipa_fw_mem>; + firmware-name = "qcom/ipa_fws.mbn"; +}; + +&mpss { + status = "okay"; + firmware-name = "qcom/modem.mbn"; +}; + +&pmk8350_rtc { + status = "okay"; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + status = "okay"; + linux,code = ; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&qupv3_id_2 { + status = "okay"; +}; + +&slpi { + status = "okay"; + firmware-name = "qcom/slpi.mbn"; +}; + +&spi14 { + status = "okay"; + + /* NXP SN1X0 NFC Secure Element @ 0 */ +}; + +&tlmm { + gpio-reserved-ranges = <44 4>; + + ts_int_default: ts-int-default-state { + pins = "gpio23"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + input-enable; + }; +}; + +/* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE WILL DIE! */ +&ufs_mem_hc { status = "disabled"; }; +&ufs_mem_phy { status = "disabled"; }; + +/* TODO: Make USB3 work (perhaps needs regulators for higher-current operation?) */ +&usb_1 { + status = "okay"; + + qcom,select-utmi-as-pipe-clk; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; + + maximum-speed = "high-speed"; + phys = <&usb_1_hsphy>; + phy-names = "usb2-phy"; +}; + +&usb_1_hsphy { + status = "okay"; +}; + +&usb_1_qmpphy { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi new file mode 100644 index 000000000..888bf4cd7 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -0,0 +1,3438 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Linaro Limited + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <38400000>; + clock-output-names = "xo_board"; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + clock-frequency = <32000>; + #clock-cells = <0>; + }; + + ufs_phy_rx_symbol_0_clk: ufs-phy-rx-symbol-0 { + compatible = "fixed-clock"; + clock-frequency = <1000>; + #clock-cells = <0>; + }; + + ufs_phy_rx_symbol_1_clk: ufs-phy-rx-symbol-1 { + compatible = "fixed-clock"; + clock-frequency = <1000>; + #clock-cells = <0>; + }; + + ufs_phy_tx_symbol_0_clk: ufs-phy-tx-symbol-0 { + compatible = "fixed-clock"; + clock-frequency = <1000>; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; + #cooling-cells = <2>; + L2_0: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x100>; + enable-method = "psci"; + next-level-cache = <&L2_100>; + qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; + #cooling-cells = <2>; + L2_100: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x200>; + enable-method = "psci"; + next-level-cache = <&L2_200>; + qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; + #cooling-cells = <2>; + L2_200: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x300>; + enable-method = "psci"; + next-level-cache = <&L2_300>; + qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; + #cooling-cells = <2>; + L2_300: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "arm,cortex-a78"; + reg = <0x0 0x400>; + enable-method = "psci"; + next-level-cache = <&L2_400>; + qcom,freq-domain = <&cpufreq_hw 1>; + power-domains = <&CPU_PD4>; + power-domain-names = "psci"; + #cooling-cells = <2>; + L2_400: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "arm,cortex-a78"; + reg = <0x0 0x500>; + enable-method = "psci"; + next-level-cache = <&L2_500>; + qcom,freq-domain = <&cpufreq_hw 1>; + power-domains = <&CPU_PD5>; + power-domain-names = "psci"; + #cooling-cells = <2>; + L2_500: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "arm,cortex-a78"; + reg = <0x0 0x600>; + enable-method = "psci"; + next-level-cache = <&L2_600>; + qcom,freq-domain = <&cpufreq_hw 1>; + power-domains = <&CPU_PD6>; + power-domain-names = "psci"; + #cooling-cells = <2>; + L2_600: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "arm,cortex-x1"; + reg = <0x0 0x700>; + enable-method = "psci"; + next-level-cache = <&L2_700>; + qcom,freq-domain = <&cpufreq_hw 2>; + power-domains = <&CPU_PD7>; + power-domain-names = "psci"; + #cooling-cells = <2>; + L2_700: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + + core4 { + cpu = <&CPU4>; + }; + + core5 { + cpu = <&CPU5>; + }; + + core6 { + cpu = <&CPU6>; + }; + + core7 { + cpu = <&CPU7>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "silver-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <360>; + exit-latency-us = <531>; + min-residency-us = <3934>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "gold-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <702>; + exit-latency-us = <1061>; + min-residency-us = <4488>; + local-timer-stop; + }; + }; + + domain-idle-states { + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "domain-idle-state"; + idle-state-name = "cluster-power-collapse"; + arm,psci-suspend-param = <0x4100c344>; + entry-latency-us = <3263>; + exit-latency-us = <6562>; + min-residency-us = <9987>; + local-timer-stop; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-sm8350", "qcom,scm"; + #reset-cells = <1>; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x80000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = ; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + + CPU_PD0: cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD1: cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD2: cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD3: cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD4: cpu4 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD5: cpu5 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD6: cpu6 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD7: cpu7 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CLUSTER_PD: cpu-cluster0 { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP_0>; + }; + }; + + qup_opp_table_100mhz: opp-table-qup100mhz { + compatible = "operating-points-v2"; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + }; + + qup_opp_table_120mhz: opp-table-qup120mhz { + compatible = "operating-points-v2"; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-120000000 { + opp-hz = /bits/ 64 <120000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: memory@80000000 { + reg = <0x0 0x80000000 0x0 0x600000>; + no-map; + }; + + xbl_aop_mem: memory@80700000 { + no-map; + reg = <0x0 0x80700000 0x0 0x160000>; + }; + + cmd_db: memory@80860000 { + compatible = "qcom,cmd-db"; + reg = <0x0 0x80860000 0x0 0x20000>; + no-map; + }; + + reserved_xbl_uefi_log: memory@80880000 { + reg = <0x0 0x80880000 0x0 0x14000>; + no-map; + }; + + smem_mem: memory@80900000 { + reg = <0x0 0x80900000 0x0 0x200000>; + no-map; + }; + + cpucp_fw_mem: memory@80b00000 { + reg = <0x0 0x80b00000 0x0 0x100000>; + no-map; + }; + + cdsp_secure_heap: memory@80c00000 { + reg = <0x0 0x80c00000 0x0 0x4600000>; + no-map; + }; + + pil_camera_mem: mmeory@85200000 { + reg = <0x0 0x85200000 0x0 0x500000>; + no-map; + }; + + pil_video_mem: memory@85700000 { + reg = <0x0 0x85700000 0x0 0x500000>; + no-map; + }; + + pil_cvp_mem: memory@85c00000 { + reg = <0x0 0x85c00000 0x0 0x500000>; + no-map; + }; + + pil_adsp_mem: memory@86100000 { + reg = <0x0 0x86100000 0x0 0x2100000>; + no-map; + }; + + pil_slpi_mem: memory@88200000 { + reg = <0x0 0x88200000 0x0 0x1500000>; + no-map; + }; + + pil_cdsp_mem: memory@89700000 { + reg = <0x0 0x89700000 0x0 0x1e00000>; + no-map; + }; + + pil_ipa_fw_mem: memory@8b500000 { + reg = <0x0 0x8b500000 0x0 0x10000>; + no-map; + }; + + pil_ipa_gsi_mem: memory@8b510000 { + reg = <0x0 0x8b510000 0x0 0xa000>; + no-map; + }; + + pil_gpu_mem: memory@8b51a000 { + reg = <0x0 0x8b51a000 0x0 0x2000>; + no-map; + }; + + pil_spss_mem: memory@8b600000 { + reg = <0x0 0x8b600000 0x0 0x100000>; + no-map; + }; + + pil_modem_mem: memory@8b800000 { + reg = <0x0 0x8b800000 0x0 0x10000000>; + no-map; + }; + + rmtfs_mem: memory@9b800000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x9b800000 0x0 0x280000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + + hyp_reserved_mem: memory@d0000000 { + reg = <0x0 0xd0000000 0x0 0x800000>; + no-map; + }; + + pil_trustedvm_mem: memory@d0800000 { + reg = <0x0 0xd0800000 0x0 0x76f7000>; + no-map; + }; + + qrtr_shbuf: memory@d7ef7000 { + reg = <0x0 0xd7ef7000 0x0 0x9000>; + no-map; + }; + + chan0_shbuf: memory@d7f00000 { + reg = <0x0 0xd7f00000 0x0 0x80000>; + no-map; + }; + + chan1_shbuf: memory@d7f80000 { + reg = <0x0 0xd7f80000 0x0 0x80000>; + no-map; + }; + + removed_mem: memory@d8800000 { + reg = <0x0 0xd8800000 0x0 0x6800000>; + no-map; + }; + }; + + smem: qcom,smem { + compatible = "qcom,smem"; + memory-region = <&smem_mem>; + hwlocks = <&tcsr_mutex 3>; + }; + + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + smp2p_adsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_adsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-cdsp { + compatible = "qcom,smp2p"; + qcom,smem = <94>, <432>; + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + smp2p_cdsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_cdsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-modem { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + smp2p_modem_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_modem_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + ipa_smp2p_out: ipa-ap-to-modem { + qcom,entry-name = "ipa"; + #qcom,smem-state-cells = <1>; + }; + + ipa_smp2p_in: ipa-modem-to-ap { + qcom,entry-name = "ipa"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-slpi { + compatible = "qcom,smp2p"; + qcom,smem = <481>, <430>; + interrupts-extended = <&ipcc IPCC_CLIENT_SLPI + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_SLPI + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <3>; + + smp2p_slpi_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_slpi_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc@0 { + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + compatible = "simple-bus"; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-sm8350"; + reg = <0x0 0x00100000 0x0 0x1f0000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clock-names = "bi_tcxo", + "sleep_clk", + "pcie_0_pipe_clk", + "pcie_1_pipe_clk", + "ufs_card_rx_symbol_0_clk", + "ufs_card_rx_symbol_1_clk", + "ufs_card_tx_symbol_0_clk", + "ufs_phy_rx_symbol_0_clk", + "ufs_phy_rx_symbol_1_clk", + "ufs_phy_tx_symbol_0_clk", + "usb3_phy_wrapper_gcc_usb30_pipe_clk", + "usb3_uni_phy_sec_gcc_usb30_pipe_clk"; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>, + <0>, + <0>, + <0>, + <0>, + <0>, + <&ufs_phy_rx_symbol_0_clk>, + <&ufs_phy_rx_symbol_1_clk>, + <&ufs_phy_tx_symbol_0_clk>, + <0>, + <0>; + }; + + ipcc: mailbox@408000 { + compatible = "qcom,sm8350-ipcc", "qcom,ipcc"; + reg = <0 0x00408000 0 0x1000>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <3>; + #mbox-cells = <2>; + }; + + gpi_dma2: dma-controller@800000 { + compatible = "qcom,sm8350-gpi-dma", "qcom,sm6350-gpi-dma"; + reg = <0 0x00800000 0 0x60000>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + ; + dma-channels = <12>; + dma-channel-mask = <0xff>; + iommus = <&apps_smmu 0x5f6 0x0>; + #dma-cells = <3>; + status = "disabled"; + }; + + qupv3_id_2: geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x008c0000 0x0 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; + iommus = <&apps_smmu 0x5e3 0x0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + i2c14: i2c@880000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00880000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c14_default>; + interrupts = ; + dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>, + <&gpi_dma2 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi14: spi@880000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00880000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + interrupts = ; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_120mhz>; + dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>, + <&gpi_dma2 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c15: i2c@884000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00884000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c15_default>; + interrupts = ; + dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>, + <&gpi_dma2 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi15: spi@884000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00884000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + interrupts = ; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_120mhz>; + dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>, + <&gpi_dma2 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c16: i2c@888000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00888000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c16_default>; + interrupts = ; + dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>, + <&gpi_dma2 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi16: spi@888000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00888000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + interrupts = ; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>, + <&gpi_dma2 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c17: i2c@88c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0088c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c17_default>; + interrupts = ; + dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>, + <&gpi_dma2 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi17: spi@88c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0088c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + interrupts = ; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>, + <&gpi_dma2 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + /* QUP no. 18 seems to be strictly SPI/UART-only */ + + spi18: spi@890000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00890000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + interrupts = ; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>, + <&gpi_dma2 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart18: serial@890000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00890000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart18_default>; + interrupts = ; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + status = "disabled"; + }; + + i2c19: i2c@894000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00894000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c19_default>; + interrupts = ; + dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>, + <&gpi_dma2 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi19: spi@894000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00894000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + interrupts = ; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>, + <&gpi_dma2 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + gpi_dma0: dma-controller@900000 { + compatible = "qcom,sm8350-gpi-dma", "qcom,sm6350-gpi-dma"; + reg = <0 0x00900000 0 0x60000>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + ; + dma-channels = <12>; + dma-channel-mask = <0x7e>; + iommus = <&apps_smmu 0x5b6 0x0>; + #dma-cells = <3>; + status = "disabled"; + }; + + qupv3_id_0: geniqup@9c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x009c0000 0x0 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + iommus = <&apps_smmu 0x5a3 0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + i2c0: i2c@980000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00980000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c0_default>; + interrupts = ; + dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, + <&gpi_dma0 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi0: spi@980000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00980000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + interrupts = ; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, + <&gpi_dma0 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@984000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00984000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c1_default>; + interrupts = ; + dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, + <&gpi_dma0 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@984000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00984000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + interrupts = ; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, + <&gpi_dma0 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@988000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00988000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c2_default>; + interrupts = ; + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, + <&gpi_dma0 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@988000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00988000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + interrupts = ; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, + <&gpi_dma0 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart2: serial@98c000 { + compatible = "qcom,geni-debug-uart"; + reg = <0 0x0098c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart3_default_state>; + interrupts = ; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + status = "disabled"; + }; + + /* QUP no. 3 seems to be strictly SPI-only */ + + spi3: spi@98c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0098c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + interrupts = ; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, + <&gpi_dma0 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@990000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00990000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c4_default>; + interrupts = ; + dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, + <&gpi_dma0 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi4: spi@990000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00990000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + interrupts = ; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, + <&gpi_dma0 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@994000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00994000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c5_default>; + interrupts = ; + dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, + <&gpi_dma0 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi5: spi@994000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00994000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + interrupts = ; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, + <&gpi_dma0 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c6: i2c@998000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00998000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c6_default>; + interrupts = ; + dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>, + <&gpi_dma0 1 6 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi6: spi@998000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00998000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + interrupts = ; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>, + <&gpi_dma0 1 6 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart6: serial@998000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00998000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart6_default>; + interrupts = ; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + status = "disabled"; + }; + + i2c7: i2c@99c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0099c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c7_default>; + interrupts = ; + dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>, + <&gpi_dma0 1 7 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi7: spi@99c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0099c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + interrupts = ; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>, + <&gpi_dma0 1 7 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + gpi_dma1: dma-controller@a00000 { + compatible = "qcom,sm8350-gpi-dma", "qcom,sm6350-gpi-dma"; + reg = <0 0x00a00000 0 0x60000>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + ; + dma-channels = <12>; + dma-channel-mask = <0xff>; + iommus = <&apps_smmu 0x56 0x0>; + #dma-cells = <3>; + status = "disabled"; + }; + + qupv3_id_1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x00ac0000 0x0 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + iommus = <&apps_smmu 0x43 0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + i2c8: i2c@a80000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a80000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c8_default>; + interrupts = ; + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, + <&gpi_dma1 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi8: spi@a80000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a80000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + interrupts = ; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_120mhz>; + dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, + <&gpi_dma1 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c9: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a84000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c9_default>; + interrupts = ; + dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, + <&gpi_dma1 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi9: spi@a84000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a84000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + interrupts = ; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, + <&gpi_dma1 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c10: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a88000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c10_default>; + interrupts = ; + dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, + <&gpi_dma1 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi10: spi@a88000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a88000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + interrupts = ; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, + <&gpi_dma1 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c11: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a8c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c11_default>; + interrupts = ; + dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, + <&gpi_dma1 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi11: spi@a8c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a8c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + interrupts = ; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, + <&gpi_dma1 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c12: i2c@a90000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a90000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c12_default>; + interrupts = ; + dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, + <&gpi_dma1 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi12: spi@a90000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a90000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + interrupts = ; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, + <&gpi_dma1 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c13: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a94000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c13_default>; + interrupts = ; + dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, + <&gpi_dma1 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi13: spi@a94000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a94000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + interrupts = ; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>, + <&gpi_dma1 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,sm8350-smmu-500", "arm,mmu-500"; + reg = <0 0x15000000 0 0x100000>; + #iommu-cells = <2>; + #global-interrupts = <2>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + }; + + config_noc: interconnect@1500000 { + compatible = "qcom,sm8350-config-noc"; + reg = <0 0x01500000 0 0xa580>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mc_virt: interconnect@1580000 { + compatible = "qcom,sm8350-mc-virt"; + reg = <0 0x01580000 0 0x1000>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect@1680000 { + compatible = "qcom,sm8350-system-noc"; + reg = <0 0x01680000 0 0x1c200>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre1_noc: interconnect@16e0000 { + compatible = "qcom,sm8350-aggre1-noc"; + reg = <0 0x016e0000 0 0x1f180>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre2_noc: interconnect@1700000 { + compatible = "qcom,sm8350-aggre2-noc"; + reg = <0 0x01700000 0 0x33000>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mmss_noc: interconnect@1740000 { + compatible = "qcom,sm8350-mmss-noc"; + reg = <0 0x01740000 0 0x1f080>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + lpass_ag_noc: interconnect@3c40000 { + compatible = "qcom,sm8350-lpass-ag-noc"; + reg = <0 0x03c40000 0 0xf080>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + compute_noc: interconnect@a0c0000{ + compatible = "qcom,sm8350-compute-noc"; + reg = <0 0x0a0c0000 0 0xa180>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + ipa: ipa@1e40000 { + compatible = "qcom,sm8350-ipa"; + + iommus = <&apps_smmu 0x5c0 0x0>, + <&apps_smmu 0x5c2 0x0>; + reg = <0 0x1e40000 0 0x8000>, + <0 0x1e50000 0 0x4b20>, + <0 0x1e04000 0 0x23000>; + reg-names = "ipa-reg", + "ipa-shared", + "gsi"; + + interrupts-extended = <&intc GIC_SPI 655 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>, + <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ipa", + "gsi", + "ipa-clock-query", + "ipa-setup-ready"; + + clocks = <&rpmhcc RPMH_IPA_CLK>; + clock-names = "core"; + + interconnects = <&aggre2_noc MASTER_IPA &mc_virt SLAVE_EBI1>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_IPA_CFG>; + interconnect-names = "memory", + "config"; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&ipa_smp2p_out 0>, + <&ipa_smp2p_out 1>; + qcom,smem-state-names = "ipa-clock-enabled-valid", + "ipa-clock-enabled"; + + status = "disabled"; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x01f40000 0x0 0x40000>; + #hwlock-cells = <1>; + }; + + mpss: remoteproc@4080000 { + compatible = "qcom,sm8350-mpss-pas"; + reg = <0x0 0x04080000 0x0 0x4040>; + + interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SM8350_CX>, + <&rpmhpd SM8350_MSS>; + power-domain-names = "cx", "mss"; + + interconnects = <&mc_virt MASTER_LLCC &mc_virt SLAVE_EBI1>; + + memory-region = <&pil_modem_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_modem_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + label = "modem"; + qcom,remote-pid = <1>; + }; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,sm8350-pdc", "qcom,pdc"; + reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>; + qcom,pdc-ranges = <0 480 40>, <40 140 14>, <54 263 1>, <55 306 4>, + <59 312 3>, <62 374 2>, <64 434 2>, <66 438 3>, + <69 86 1>, <70 520 54>, <124 609 31>, <155 63 1>, + <156 716 12>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + tsens0: thermal-sensor@c263000 { + compatible = "qcom,sm8350-tsens", "qcom,tsens-v2"; + reg = <0 0x0c263000 0 0x1ff>, /* TM */ + <0 0x0c222000 0 0x8>; /* SROT */ + #qcom,sensors = <15>; + interrupts-extended = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 28 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c265000 { + compatible = "qcom,sm8350-tsens", "qcom,tsens-v2"; + reg = <0 0x0c265000 0 0x1ff>, /* TM */ + <0 0x0c223000 0 0x8>; /* SROT */ + #qcom,sensors = <14>; + interrupts-extended = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 29 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + aoss_qmp: power-controller@c300000 { + compatible = "qcom,sm8350-aoss-qmp", "qcom,aoss-qmp"; + reg = <0 0x0c300000 0 0x400>; + interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; + + #clock-cells = <0>; + }; + + sram@c3f0000 { + compatible = "qcom,rpmh-stats"; + reg = <0 0x0c3f0000 0 0x400>; + }; + + spmi_bus: spmi@c440000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0 0xc440000 0x0 0x1100>, + <0x0 0xc600000 0x0 0x2000000>, + <0x0 0xe600000 0x0 0x100000>, + <0x0 0xe700000 0x0 0xa0000>, + <0x0 0xc40a000 0x0 0x26000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + tlmm: pinctrl@f100000 { + compatible = "qcom,sm8350-tlmm"; + reg = <0 0x0f100000 0 0x300000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 204>; + wakeup-parent = <&pdc>; + + qup_uart3_default_state: qup-uart3-default-state { + rx-pins { + pins = "gpio18"; + function = "qup3"; + }; + tx-pins { + pins = "gpio19"; + function = "qup3"; + }; + }; + + qup_uart6_default: qup-uart6-default-state { + pins = "gpio30", "gpio31"; + function = "qup6"; + drive-strength = <2>; + bias-disable; + }; + + qup_uart18_default: qup-uart18-default-state { + pins = "gpio68", "gpio69"; + function = "qup18"; + drive-strength = <2>; + bias-disable; + }; + + qup_i2c0_default: qup-i2c0-default-state { + pins = "gpio4", "gpio5"; + function = "qup0"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c1_default: qup-i2c1-default-state { + pins = "gpio8", "gpio9"; + function = "qup1"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c2_default: qup-i2c2-default-state { + pins = "gpio12", "gpio13"; + function = "qup2"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c4_default: qup-i2c4-default-state { + pins = "gpio20", "gpio21"; + function = "qup4"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c5_default: qup-i2c5-default-state { + pins = "gpio24", "gpio25"; + function = "qup5"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c6_default: qup-i2c6-default-state { + pins = "gpio28", "gpio29"; + function = "qup6"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c7_default: qup-i2c7-default-state { + pins = "gpio32", "gpio33"; + function = "qup7"; + drive-strength = <2>; + bias-disable; + }; + + qup_i2c8_default: qup-i2c8-default-state { + pins = "gpio36", "gpio37"; + function = "qup8"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c9_default: qup-i2c9-default-state { + pins = "gpio40", "gpio41"; + function = "qup9"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c10_default: qup-i2c10-default-state { + pins = "gpio44", "gpio45"; + function = "qup10"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c11_default: qup-i2c11-default-state { + pins = "gpio48", "gpio49"; + function = "qup11"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c12_default: qup-i2c12-default-state { + pins = "gpio52", "gpio53"; + function = "qup12"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c13_default: qup-i2c13-default-state { + pins = "gpio0", "gpio1"; + function = "qup13"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c14_default: qup-i2c14-default-state { + pins = "gpio56", "gpio57"; + function = "qup14"; + drive-strength = <2>; + bias-disable; + }; + + qup_i2c15_default: qup-i2c15-default-state { + pins = "gpio60", "gpio61"; + function = "qup15"; + drive-strength = <2>; + bias-disable; + }; + + qup_i2c16_default: qup-i2c16-default-state { + pins = "gpio64", "gpio65"; + function = "qup16"; + drive-strength = <2>; + bias-disable; + }; + + qup_i2c17_default: qup-i2c17-default-state { + pins = "gpio72", "gpio73"; + function = "qup17"; + drive-strength = <2>; + bias-disable; + }; + + qup_i2c19_default: qup-i2c19-default-state { + pins = "gpio76", "gpio77"; + function = "qup19"; + drive-strength = <2>; + bias-disable; + }; + }; + + rng: rng@10d3000 { + compatible = "qcom,prng-ee"; + reg = <0 0x010d3000 0 0x1000>; + clocks = <&rpmhcc RPMH_HWKM_CLK>; + clock-names = "core"; + }; + + intc: interrupt-controller@17a00000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-controller; + #redistributor-regions = <1>; + redistributor-stride = <0 0x20000>; + reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */ + <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */ + interrupts = ; + }; + + timer@17c20000 { + compatible = "arm,armv7-timer-mem"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0x20000000>; + reg = <0x0 0x17c20000 0x0 0x1000>; + clock-frequency = <19200000>; + + frame@17c21000 { + frame-number = <0>; + interrupts = , + ; + reg = <0x17c21000 0x1000>, + <0x17c22000 0x1000>; + }; + + frame@17c23000 { + frame-number = <1>; + interrupts = ; + reg = <0x17c23000 0x1000>; + status = "disabled"; + }; + + frame@17c25000 { + frame-number = <2>; + interrupts = ; + reg = <0x17c25000 0x1000>; + status = "disabled"; + }; + + frame@17c27000 { + frame-number = <3>; + interrupts = ; + reg = <0x17c27000 0x1000>; + status = "disabled"; + }; + + frame@17c29000 { + frame-number = <4>; + interrupts = ; + reg = <0x17c29000 0x1000>; + status = "disabled"; + }; + + frame@17c2b000 { + frame-number = <5>; + interrupts = ; + reg = <0x17c2b000 0x1000>; + status = "disabled"; + }; + + frame@17c2d000 { + frame-number = <6>; + interrupts = ; + reg = <0x17c2d000 0x1000>; + status = "disabled"; + }; + }; + + apps_rsc: rsc@18200000 { + label = "apps_rsc"; + compatible = "qcom,rpmh-rsc"; + reg = <0x0 0x18200000 0x0 0x10000>, + <0x0 0x18210000 0x0 0x10000>, + <0x0 0x18220000 0x0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = , + , + ; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = , , + , ; + + rpmhcc: clock-controller { + compatible = "qcom,sm8350-rpmh-clk"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board>; + }; + + rpmhpd: power-controller { + compatible = "qcom,sm8350-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = ; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = ; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = ; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = ; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = ; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = ; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = ; + }; + + rpmhpd_opp_nom_l2: opp8 { + opp-level = ; + }; + + rpmhpd_opp_turbo: opp9 { + opp-level = ; + }; + + rpmhpd_opp_turbo_l1: opp10 { + opp-level = ; + }; + }; + }; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + }; + + cpufreq_hw: cpufreq@18591000 { + compatible = "qcom,sm8350-cpufreq-epss", "qcom,cpufreq-epss"; + reg = <0 0x18591000 0 0x1000>, + <0 0x18592000 0 0x1000>, + <0 0x18593000 0 0x1000>; + reg-names = "freq-domain0", "freq-domain1", "freq-domain2"; + + interrupts = , + , + ; + interrupt-names = "dcvsh-irq-0", + "dcvsh-irq-1", + "dcvsh-irq-2"; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; + clock-names = "xo", "alternate"; + + #freq-domain-cells = <1>; + }; + + ufs_mem_hc: ufshc@1d84000 { + compatible = "qcom,sm8350-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0 0x01d84000 0 0x3000>; + interrupts = ; + phys = <&ufs_mem_phy_lanes>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + power-domains = <&gcc UFS_PHY_GDSC>; + + iommus = <&apps_smmu 0xe0 0x0>; + + clock-names = + "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + clocks = + <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + freq-table-hz = + <75000000 300000000>, + <0 0>, + <0 0>, + <75000000 300000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>; + status = "disabled"; + }; + + ufs_mem_phy: phy@1d87000 { + compatible = "qcom,sm8350-qmp-ufs-phy"; + reg = <0 0x01d87000 0 0x1c4>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clock-names = "ref", + "ref_aux"; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + status = "disabled"; + + ufs_mem_phy_lanes: phy@1d87400 { + reg = <0 0x01d87400 0 0x188>, + <0 0x01d87600 0 0x200>, + <0 0x01d87c00 0 0x200>, + <0 0x01d87800 0 0x188>, + <0 0x01d87a00 0 0x200>; + #phy-cells = <0>; + }; + }; + + slpi: remoteproc@5c00000 { + compatible = "qcom,sm8350-slpi-pas"; + reg = <0 0x05c00000 0 0x4000>; + + interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SM8350_LCX>, + <&rpmhpd SM8350_LMX>; + power-domain-names = "lcx", "lmx"; + + memory-region = <&pil_slpi_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_slpi_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_SLPI + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_SLPI + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "slpi"; + qcom,remote-pid = <3>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "sdsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x0541 0x0>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x0542 0x0>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x0543 0x0>; + /* note: shared-cb = <4> in downstream */ + }; + }; + }; + }; + + cdsp: remoteproc@98900000 { + compatible = "qcom,sm8350-cdsp-pas"; + reg = <0 0x098900000 0 0x1400000>; + + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SM8350_CX>, + <&rpmhpd SM8350_MXC>; + power-domain-names = "cx", "mxc"; + + interconnects = <&compute_noc MASTER_CDSP_PROC &mc_virt SLAVE_EBI1>; + + memory-region = <&pil_cdsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_cdsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "cdsp"; + qcom,remote-pid = <5>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "cdsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x2161 0x0400>, + <&apps_smmu 0x1181 0x0420>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x2162 0x0400>, + <&apps_smmu 0x1182 0x0420>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x2163 0x0400>, + <&apps_smmu 0x1183 0x0420>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x2164 0x0400>, + <&apps_smmu 0x1184 0x0420>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x2165 0x0400>, + <&apps_smmu 0x1185 0x0420>; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x2166 0x0400>, + <&apps_smmu 0x1186 0x0420>; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x2167 0x0400>, + <&apps_smmu 0x1187 0x0420>; + }; + + compute-cb@8 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <8>; + iommus = <&apps_smmu 0x2168 0x0400>, + <&apps_smmu 0x1188 0x0420>; + }; + + /* note: secure cb9 in downstream */ + }; + }; + }; + + usb_1_hsphy: phy@88e3000 { + compatible = "qcom,sm8350-usb-hs-phy", + "qcom,usb-snps-hs-7nm-phy"; + reg = <0 0x088e3000 0 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + }; + + usb_2_hsphy: phy@88e4000 { + compatible = "qcom,sm8250-usb-hs-phy", + "qcom,usb-snps-hs-7nm-phy"; + reg = <0 0x088e4000 0 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; + }; + + usb_1_qmpphy: phy-wrapper@88e9000 { + compatible = "qcom,sm8350-qmp-usb3-phy"; + reg = <0 0x088e9000 0 0x200>, + <0 0x088e8000 0 0x20>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; + clock-names = "aux", "ref_clk_src", "com_aux"; + + resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, + <&gcc GCC_USB3_PHY_PRIM_BCR>; + reset-names = "phy", "common"; + + usb_1_ssphy: phy@88e9200 { + reg = <0 0x088e9200 0 0x200>, + <0 0x088e9400 0 0x200>, + <0 0x088e9c00 0 0x400>, + <0 0x088e9600 0 0x200>, + <0 0x088e9800 0 0x200>, + <0 0x088e9a00 0 0x100>; + #phy-cells = <0>; + #clock-cells = <0>; + clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_phy_pipe_clk_src"; + }; + }; + + usb_2_qmpphy: phy-wrapper@88eb000 { + compatible = "qcom,sm8350-qmp-usb3-uni-phy"; + reg = <0 0x088eb000 0 0x200>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_SEC_CLKREF_EN>, + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>; + clock-names = "aux", "ref_clk_src", "ref", "com_aux"; + + resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>, + <&gcc GCC_USB3_PHY_SEC_BCR>; + reset-names = "phy", "common"; + + usb_2_ssphy: phy@88ebe00 { + reg = <0 0x088ebe00 0 0x200>, + <0 0x088ec000 0 0x200>, + <0 0x088eb200 0 0x1100>; + #phy-cells = <0>; + #clock-cells = <0>; + clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_uni_phy_pipe_clk_src"; + }; + }; + + dc_noc: interconnect@90c0000 { + compatible = "qcom,sm8350-dc-noc"; + reg = <0 0x090c0000 0 0x4200>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + gem_noc: interconnect@9100000 { + compatible = "qcom,sm8350-gem-noc"; + reg = <0 0x09100000 0 0xb4000>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system-cache-controller@9200000 { + compatible = "qcom,sm8350-llcc"; + reg = <0 0x09200000 0 0x1d0000>, <0 0x09600000 0 0x50000>; + reg-names = "llcc_base", "llcc_broadcast_base"; + }; + + usb_1: usb@a6f8800 { + compatible = "qcom,sm8350-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 15 IRQ_TYPE_EDGE_BOTH>, + <&pdc 14 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "hs_phy_irq", + "ss_phy_irq", + "dm_hs_phy_irq", + "dp_hs_phy_irq"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + usb_1_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xcd00>; + interrupts = ; + iommus = <&apps_smmu 0x0 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + usb_2: usb@a8f8800 { + compatible = "qcom,sm8350-dwc3", "qcom,dwc3"; + reg = <0 0x0a8f8800 0 0x400>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_SLEEP_CLK>, + <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB3_SEC_CLKREF_EN>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "xo"; + + assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 16 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 13 IRQ_TYPE_EDGE_BOTH>, + <&pdc 12 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "hs_phy_irq", + "ss_phy_irq", + "dm_hs_phy_irq", + "dp_hs_phy_irq"; + + power-domains = <&gcc USB30_SEC_GDSC>; + + resets = <&gcc GCC_USB30_SEC_BCR>; + + usb_2_dwc3: usb@a800000 { + compatible = "snps,dwc3"; + reg = <0 0x0a800000 0 0xcd00>; + interrupts = ; + iommus = <&apps_smmu 0x20 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_2_hsphy>, <&usb_2_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + dispcc: clock-controller@af00000 { + compatible = "qcom,sm8350-dispcc"; + reg = <0 0x0af00000 0 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>; + clock-names = "bi_tcxo", + "dsi0_phy_pll_out_byteclk", + "dsi0_phy_pll_out_dsiclk", + "dsi1_phy_pll_out_byteclk", + "dsi1_phy_pll_out_dsiclk", + "dp_phy_pll_link_clk", + "dp_phy_pll_vco_div_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + + power-domains = <&rpmhpd SM8350_MMCX>; + power-domain-names = "mmcx"; + }; + + adsp: remoteproc@17300000 { + compatible = "qcom,sm8350-adsp-pas"; + reg = <0 0x17300000 0 0x100>; + + interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SM8350_LCX>, + <&rpmhpd SM8350_LMX>; + power-domain-names = "lcx", "lmx"; + + memory-region = <&pil_adsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "lpass"; + qcom,remote-pid = <2>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "adsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1803 0x0>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1804 0x0>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x1805 0x0>; + }; + }; + }; + }; + }; + + thermal_zones: thermal-zones { + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 1>; + + trips { + cpu0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu0_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu0_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 2>; + + trips { + cpu1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu1_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu1_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 3>; + + trips { + cpu2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu2_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu2_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 4>; + + trips { + cpu3_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu3_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu3_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu4-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 7>; + + trips { + cpu4_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_top_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu4_top_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu4_top_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu5-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 8>; + + trips { + cpu5_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_top_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu5_top_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu5_top_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu6-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 9>; + + trips { + cpu6_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_top_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu6_top_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu6_top_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu7-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 10>; + + trips { + cpu7_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_top_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu7_top_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu7_top_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu4-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 11>; + + trips { + cpu4_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_bottom_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu4_bottom_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu4_bottom_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu5-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 12>; + + trips { + cpu5_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_bottom_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu5_bottom_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu5_bottom_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu6-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 13>; + + trips { + cpu6_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_bottom_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu6_bottom_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu6_bottom_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu7-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 14>; + + trips { + cpu7_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_bottom_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu7_bottom_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu7_bottom_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + aoss0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 0>; + + trips { + aoss0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + cluster0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 5>; + + trips { + cluster0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + cluster0_crit: cluster0_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cluster1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 6>; + + trips { + cluster1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + cluster1_crit: cluster1_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + aoss1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 0>; + + trips { + aoss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + gpu-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 1>; + + trips { + gpu1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <1000>; + type = "hot"; + }; + }; + }; + + gpu-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 2>; + + trips { + gpu2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <1000>; + type = "hot"; + }; + }; + }; + + nspss1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 3>; + + trips { + nspss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <1000>; + type = "hot"; + }; + }; + }; + + nspss2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 4>; + + trips { + nspss2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <1000>; + type = "hot"; + }; + }; + }; + + nspss3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 5>; + + trips { + nspss3_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <1000>; + type = "hot"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 6>; + + trips { + video_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + mem-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 7>; + + trips { + mem_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + modem1-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 8>; + + trips { + modem1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + modem2-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 9>; + + trips { + modem2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + modem3-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 10>; + + trips { + modem3_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + modem4-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 11>; + + trips { + modem4_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + camera-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 12>; + + trips { + camera1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + cam-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 13>; + + trips { + camera2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts new file mode 100644 index 000000000..38ccd4462 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts @@ -0,0 +1,444 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Linaro Limited + */ + +/dts-v1/; + +#include +#include "sm8450.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SM8450 HDK"; + compatible = "qcom,sm8450-hdk", "qcom,sm8450"; + + aliases { + serial0 = &uart7; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&apps_rsc { + pm8350-rpmh-regulators { + compatible = "qcom,pm8350-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + + vdd-l1-l4-supply = <&vreg_s11b_0p95>; + vdd-l2-l7-supply = <&vreg_bob>; + vdd-l3-l5-supply = <&vreg_bob>; + vdd-l6-l9-l10-supply = <&vreg_s12b_1p25>; + vdd-l8-supply = <&vreg_s2h_0p95>; + + vreg_s10b_1p8: smps10 { + regulator-name = "vreg_s10b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_s11b_0p95: smps11 { + regulator-name = "vreg_s11b_0p95"; + regulator-min-microvolt = <966000>; + regulator-max-microvolt = <1104000>; + }; + + vreg_s12b_1p25: smps12 { + regulator-name = "vreg_s12b_1p25"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1400000>; + }; + + vreg_l1b_0p91: ldo1 { + regulator-name = "vreg_l1b_0p91"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = ; + }; + + vreg_l2b_3p07: ldo2 { + regulator-name = "vreg_l2b_3p07"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + }; + + vreg_l3b_0p9: ldo3 { + regulator-name = "vreg_l3b_0p9"; + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <904000>; + regulator-initial-mode = ; + }; + + vreg_l5b_0p88: ldo5 { + regulator-name = "vreg_l5b_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <888000>; + regulator-initial-mode = ; + }; + + vreg_l6b_1p2: ldo6 { + regulator-name = "vreg_l6b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l7b_2p5: ldo7 { + regulator-name = "vreg_l7b_2p5"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = ; + }; + + vreg_l9b_1p2: ldo9 { + regulator-name = "vreg_l9b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + }; + + pm8350c-rpmh-regulators { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l12-supply = <&vreg_bob>; + vdd-l2-l8-supply = <&vreg_bob>; + vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>; + vdd-l6-l9-l11-supply = <&vreg_bob>; + vdd-l10-supply = <&vreg_s12b_1p25>; + + vdd-bob-supply = <&vph_pwr>; + + vreg_s1c_1p86: smps1 { + regulator-name = "vreg_s1c_1p86"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2024000>; + }; + + vreg_s10c_1p05: smps10 { + regulator-name = "vreg_s10c_1p05"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + }; + + vreg_bob: bob { + regulator-name = "vreg_bob"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = ; + }; + + vreg_l1c_1p8: ldo1 { + regulator-name = "vreg_l1c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l3c_3p0: ldo3 { + regulator-name = "vreg_l3c_3p0"; + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = ; + }; + + vreg_l4c_1p8: ldo4 { + regulator-name = "vreg_l4c_1p8"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = ; + }; + + vreg_l5c_1p8: ldo5 { + regulator-name = "vreg_l5c_1p8"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = ; + }; + + vreg_l6c_1p8: ldo6 { + regulator-name = "vreg_l6c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l7c_3p0: ldo7 { + regulator-name = "vreg_l7c_3p0"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l8c_1p8: ldo8 { + regulator-name = "vreg_l8c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l9c_2p96: ldo9 { + regulator-name = "vreg_l9c_2p96"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l12c_1p8: ldo12 { + regulator-name = "vreg_l12c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1968000>; + regulator-initial-mode = ; + }; + + vreg_l13c_3p0: ldo13 { + regulator-name = "vreg_l13c_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = ; + }; + }; + + pm8450-rpmh-regulators { + compatible = "qcom,pm8450-rpmh-regulators"; + qcom,pmic-id = "h"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + + vdd-l2-supply = <&vreg_bob>; + vdd-l3-supply = <&vreg_bob>; + vdd-l4-supply = <&vreg_bob>; + + vreg_s2h_0p95: smps2 { + regulator-name = "vreg_s2h_0p95"; + regulator-min-microvolt = <848000>; + regulator-max-microvolt = <1104000>; + }; + + vreg_s3h_0p5: smps3 { + regulator-name = "vreg_s3h_0p5"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <500000>; + }; + + vreg_l2h_0p91: ldo2 { + regulator-name = "vreg_l2h_0p91"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + }; + + vreg_l3h_0p91: ldo3 { + regulator-name = "vreg_l3h_0p91"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + }; + + }; + + pmr735a-rpmh-regulators { + compatible = "qcom,pmr735a-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + + vdd-l1-l2-supply = <&vreg_s2e_0p85>; + vdd-l3-supply = <&vreg_s1e_1p25>; + vdd-l4-supply = <&vreg_s1c_1p86>; + vdd-l5-l6-supply = <&vreg_s1c_1p86>; + vdd-l7-bob-supply = <&vreg_bob>; + + vreg_s1e_1p25: smps1 { + regulator-name = "vreg_s1e_1p25"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1296000>; + }; + + vreg_s2e_0p85: smps2 { + regulator-name = "vreg_s2e_0p85"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1040000>; + }; + + vreg_l1e_0p8: ldo1 { + regulator-name = "vreg_l1e_0p8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + vreg_l2e_0p8: ldo2 { + regulator-name = "vreg_l2e_0p8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + vreg_l3e_1p2: ldo3 { + regulator-name = "vreg_l3e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l4e_1p7: ldo4 { + regulator-name = "vreg_l4e_1p7"; + regulator-min-microvolt = <1776000>; + regulator-max-microvolt = <1776000>; + }; + + vreg_l5e_0p88: ldo5 { + regulator-name = "vreg_l5e_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + }; + + vreg_l6e_1p2: ldo6 { + regulator-name = "vreg_l6e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l7e_2p8: ldo7 { + regulator-name = "vreg_l7e_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + }; +}; + +&pcie0 { + status = "okay"; + max-link-speed = <2>; +}; + +&pcie0_phy { + status = "okay"; + vdda-phy-supply = <&vreg_l5b_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; +}; + +&pcie1 { + status = "okay"; +}; + +&pcie1_phy { + status = "okay"; + vdda-phy-supply = <&vreg_l2h_0p91>; + vdda-pll-supply = <&vreg_l6b_1p2>; +}; + +&remoteproc_adsp { + status = "okay"; + firmware-name = "qcom/sm8450/adsp.mbn"; +}; + +&remoteproc_cdsp { + status = "okay"; + firmware-name = "qcom/sm8450/cdsp.mbn"; +}; + +&remoteproc_mpss { + status = "okay"; + firmware-name = "qcom/sm8450/modem.mbn"; +}; + +&remoteproc_slpi { + status = "okay"; + firmware-name = "qcom/sm8450/slpi.mbn"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <28 4>, <36 4>; +}; + +&uart7 { + status = "okay"; +}; + +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l7b_2p5>; + vcc-max-microamp = <1100000>; + vccq-supply = <&vreg_l9b_1p2>; + vccq-max-microamp = <1200000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l5b_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdda-pll-supply = <&vreg_l5b_0p88>; + vdda18-supply = <&vreg_l1c_1p8>; + vdda33-supply = <&vreg_l2b_3p07>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l6b_1p2>; + vdda-pll-supply = <&vreg_l1b_0p91>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts new file mode 100644 index 000000000..e58fc7399 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts @@ -0,0 +1,450 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Linaro Limited + */ + +/dts-v1/; + +#include +#include "sm8450.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SM8450 QRD"; + compatible = "qcom,sm8450-qrd", "qcom,sm8450"; + + aliases { + serial0 = &uart7; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&apps_rsc { + pm8350-rpmh-regulators { + compatible = "qcom,pm8350-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + + vdd-l1-l4-supply = <&vreg_s11b_0p95>; + vdd-l2-l7-supply = <&vreg_bob>; + vdd-l3-l5-supply = <&vreg_bob>; + vdd-l6-l9-l10-supply = <&vreg_s12b_1p25>; + vdd-l8-supply = <&vreg_s2h_0p95>; + + vreg_s10b_1p8: smps10 { + regulator-name = "vreg_s10b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_s11b_0p95: smps11 { + regulator-name = "vreg_s11b_0p95"; + regulator-min-microvolt = <848000>; + regulator-max-microvolt = <1104000>; + }; + + vreg_s12b_1p25: smps12 { + regulator-name = "vreg_s12b_1p25"; + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1400000>; + }; + + vreg_l1b_0p91: ldo1 { + regulator-name = "vreg_l1b_0p91"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = ; + }; + + vreg_l2b_3p07: ldo2 { + regulator-name = "vreg_l2b_3p07"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + }; + + vreg_l3b_0p9: ldo3 { + regulator-name = "vreg_l3b_0p9"; + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <904000>; + regulator-initial-mode = ; + }; + + vreg_l5b_0p88: ldo5 { + regulator-name = "vreg_l5b_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <888000>; + regulator-initial-mode = ; + }; + + vreg_l6b_1p2: ldo6 { + regulator-name = "vreg_l6b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l7b_2p5: ldo7 { + regulator-name = "vreg_l7b_2p5"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = ; + }; + + vreg_l9b_1p2: ldo9 { + regulator-name = "vreg_l9b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + }; + + pm8350c-rpmh-regulators { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l12-supply = <&vreg_bob>; + vdd-l2-l8-supply = <&vreg_bob>; + vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>; + vdd-l6-l9-l11-supply = <&vreg_bob>; + + vdd-bob-supply = <&vph_pwr>; + + vreg_s1c_1p86: smps1 { + regulator-name = "vreg_s1c_1p86"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2024000>; + }; + + vreg_s10c_1p05: smps10 { + regulator-name = "vreg_s10c_1p05"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + }; + + vreg_bob: bob { + regulator-name = "vreg_bob"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = ; + }; + + vreg_l1c_1p8: ldo1 { + regulator-name = "vreg_l1c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l3c_3p0: ldo3 { + regulator-name = "vreg_l3c_3p0"; + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = ; + }; + + vreg_l4c_1p8: ldo4 { + regulator-name = "vreg_l4c_1p8"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = ; + }; + + vreg_l5c_1p8: ldo5 { + regulator-name = "vreg_l5c_1p8"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = ; + }; + + vreg_l6c_1p8: ldo6 { + regulator-name = "vreg_l6c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l7c_3p0: ldo7 { + regulator-name = "vreg_l7c_3p0"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l8c_1p8: ldo8 { + regulator-name = "vreg_l8c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l9c_2p96: ldo9 { + regulator-name = "vreg_l9c_2p96"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l12c_1p8: ldo12 { + regulator-name = "vreg_l12c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1968000>; + regulator-initial-mode = ; + }; + + vreg_l13c_3p0: ldo13 { + regulator-name = "vreg_l13c_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = ; + }; + }; + + pm8450-rpmh-regulators { + compatible = "qcom,pm8450-rpmh-regulators"; + qcom,pmic-id = "h"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + + vdd-l2-supply = <&vreg_bob>; + vdd-l3-supply = <&vreg_bob>; + vdd-l4-supply = <&vreg_bob>; + + vreg_s2h_0p95: smps2 { + regulator-name = "vreg_s2h_0p95"; + regulator-min-microvolt = <848000>; + regulator-max-microvolt = <1104000>; + }; + + vreg_s3h_0p5: smps3 { + regulator-name = "vreg_s3h_0p5"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <500000>; + }; + + vreg_l2h_0p91: ldo2 { + regulator-name = "vreg_l2h_0p91"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + }; + + vreg_l3h_0p91: ldo3 { + regulator-name = "vreg_l3h_0p91"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + }; + + }; + + pmr735a-rpmh-regulators { + compatible = "qcom,pmr735a-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + + vdd-l1-l2-supply = <&vreg_s2e_0p85>; + vdd-l3-supply = <&vreg_s1e_1p25>; + vdd-l4-supply = <&vreg_s1c_1p86>; + vdd-l5-l6-supply = <&vreg_s1c_1p86>; + vdd-l7-bob-supply = <&vreg_bob>; + + vreg_s1e_1p25: smps1 { + regulator-name = "vreg_s1e_1p25"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1296000>; + }; + + vreg_s2e_0p85: smps2 { + regulator-name = "vreg_s2e_0p85"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1040000>; + }; + + vreg_l1e_0p8: ldo1 { + regulator-name = "vreg_l1e_0p8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + vreg_l2e_0p8: ldo2 { + regulator-name = "vreg_l2e_0p8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + vreg_l3e_1p2: ldo3 { + regulator-name = "vreg_l3e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l4e_1p7: ldo4 { + regulator-name = "vreg_l4e_1p7"; + regulator-min-microvolt = <1776000>; + regulator-max-microvolt = <1776000>; + }; + + vreg_l5e_0p88: ldo5 { + regulator-name = "vreg_l5e_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + }; + + vreg_l6e_1p2: ldo6 { + regulator-name = "vreg_l6e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + }; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie0_phy { + status = "okay"; + vdda-phy-supply = <&vreg_l5b_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; +}; + +&gpi_dma0 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_2 { + status = "okay"; +}; + +&remoteproc_adsp { + status = "okay"; + firmware-name = "qcom/sm8450/adsp.mbn"; +}; + +&remoteproc_cdsp { + status = "okay"; + firmware-name = "qcom/sm8450/cdsp.mbn"; +}; + +&remoteproc_mpss { + status = "okay"; + firmware-name = "qcom/sm8450/modem.mbn"; +}; + +&remoteproc_slpi { + status = "okay"; + firmware-name = "qcom/sm8450/slpi.mbn"; +}; + +&spi4 { + status = "okay"; +}; + +&spi18 { + status = "okay"; +}; + +&spi19 { + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <28 4>, <36 4>; +}; + +&uart7 { + status = "okay"; +}; + +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l7b_2p5>; + vcc-max-microamp = <1100000>; + vccq-supply = <&vreg_l9b_1p2>; + vccq-max-microamp = <1200000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l5b_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdda-pll-supply = <&vreg_l5b_0p88>; + vdda18-supply = <&vreg_l1c_1p8>; + vdda33-supply = <&vreg_l2b_3p07>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l6b_1p2>; + vdda-pll-supply = <&vreg_l1b_0p91>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts new file mode 100644 index 000000000..6351050bc --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts @@ -0,0 +1,632 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Konrad Dybcio + */ + +/dts-v1/; + +#include +#include "sm8450.dtsi" + +/delete-node/ &adsp_mem; +/delete-node/ &rmtfs_mem; +/delete-node/ &video_mem; + +/ { + model = "Sony Xperia 1 IV"; + compatible = "sony,pdx223", "qcom,sm8450"; + chassis-type = "handset"; + + aliases { + serial0 = &uart7; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reserved-memory { + adsp_mem: memory@85700000 { + reg = <0x0 0x85700000 0x0 0x2800000>; + no-map; + }; + + video_mem: memory@9fd00000 { + reg = <0x0 0x9fd00000 0x0 0x700000>; + no-map; + }; + + rmtfs_mem: memory@f3300000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0xf3300000 0x0 0x280000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + + ramoops@ffc00000 { + compatible = "ramoops"; + reg = <0 0xffc00000 0 0x200000>; + console-size = <0x40000>; + record-size = <0x1000>; + ecc-size = <16>; + no-map; + }; + }; + + /* Sadly, the voltages for these GPIO regulators are unknown. */ + imx650_vana_vreg: imx650-vana-regulator { + compatible = "regulator-fixed"; + regulator-name = "imx650_vana_vreg"; + gpio = <&tlmm 23 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&apps_rsc { + pm8350-rpmh-regulators { + compatible = "qcom,pm8350-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + + vdd-l1-l4-supply = <&pm8350_s11>; + vdd-l2-l7-supply = <&vreg_bob>; + vdd-l3-l5-supply = <&vreg_bob>; + vdd-l6-l9-l10-supply = <&pm8350_s12>; + + /* + * ARC regulators: + * s5 - gfx.lvl + * l8 - lcx.lvl + */ + + pm8350_s10: smps10 { + regulator-name = "pm8350_s10"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8350_s11: smps11 { + regulator-name = "pm8350_s11"; + regulator-min-microvolt = <848000>; + regulator-max-microvolt = <1104000>; + }; + + pm8350_s12: smps12 { + regulator-name = "pm8350_s12"; + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1400000>; + }; + + pm8350_l1: ldo1 { + regulator-name = "pm8350_l1"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = ; + }; + + pm8350_l2: ldo2 { + regulator-name = "pm8350_l2"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + }; + + pm8350_l3: ldo3 { + regulator-name = "pm8350_l3"; + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <904000>; + regulator-initial-mode = ; + }; + + pm8350_l5: ldo5 { + regulator-name = "pm8350_l5"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + }; + + pm8350_l6: ldo6 { + regulator-name = "pm8350_l6"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + pm8350_l7: ldo7 { + regulator-name = "pm8350_l7"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = ; + }; + + pm8350_l9: ldo9 { + regulator-name = "pm8350_l9"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + }; + + pm8350c-rpmh-regulators { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l12-supply = <&vreg_bob>; + vdd-l2-l8-supply = <&vreg_bob>; + vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>; + vdd-l6-l9-l11-supply = <&vreg_bob>; + vdd-l10-supply = <&pm8350_s12>; + + vdd-bob-supply = <&vph_pwr>; + + /* + * ARC regulators: + * s2 - mxc.lvl + * s4 - mss.lvl + * s6 - cx.lvl + */ + + pm8350c_s1: smps1 { + regulator-name = "pm8350c_s1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2024000>; + }; + + pm8350c_s10: smps10 { + regulator-name = "pm8350c_s10"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + }; + + vreg_bob: bob { + regulator-name = "vreg_bob"; + regulator-min-microvolt = <3400000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = ; + }; + + pm8350c_l1: ldo1 { + regulator-name = "pm8350c_l1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + pm8350c_l2: ldo2 { + regulator-name = "pm8350c_l2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + pm8350c_l3: ldo3 { + regulator-name = "pm8350c_l3"; + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = ; + }; + + pm8350c_l4: ldo4 { + regulator-name = "pm8350c_l4"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = ; + }; + + pm8350c_l5: ldo5 { + regulator-name = "pm8350c_l5"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = ; + }; + + pm8350c_l6: ldo6 { + regulator-name = "pm8350c_l6"; + regulator-min-microvolt = <2960000>; + /* Originally max = 3008000 but SDHCI expects 2960000 */ + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + pm8350c_l7: ldo7 { + regulator-name = "pm8350c_l7"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + pm8350c_l8: ldo8 { + regulator-name = "pm8350c_l8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + pm8350c_l9: ldo9 { + regulator-name = "pm8350c_l9"; + regulator-min-microvolt = <2960000>; + /* Originally max = 3008000 but SDHCI expects 2960000 */ + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + pm8350c_l10: ldo10 { + regulator-name = "pm8350c_l10"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + pm8350c_l12: ldo12 { + regulator-name = "pm8350c_l12"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1968000>; + regulator-initial-mode = ; + }; + + pm8350c_l13: ldo13 { + regulator-name = "pm8350c_l13"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = ; + }; + }; + + pm8450-rpmh-regulators { + compatible = "qcom,pm8450-rpmh-regulators"; + qcom,pmic-id = "h"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + + vdd-l2-supply = <&vreg_bob>; + vdd-l3-supply = <&vreg_bob>; + vdd-l4-supply = <&vreg_bob>; + + /* + * ARC regulators: + * S2 - ebi.lvl + * S4 - mmcx.lvl + * S6 - mx.lvl + * L1 - lmx.lvl + */ + + pm8450_s3: smps3 { + regulator-name = "pm8450_s3"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <600000>; + }; + + pm8450_l2: ldo2 { + regulator-name = "pm8450_l2"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + }; + + pm8450_l3: ldo3 { + regulator-name = "pm8450_l3"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + }; + }; + + pmr735a-rpmh-regulators { + compatible = "qcom,pmr735a-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + + vdd-l1-l2-supply = <&pmr735a_s2>; + vdd-l3-supply = <&pmr735a_s1>; + vdd-l4-supply = <&pm8350c_s1>; + vdd-l5-l6-supply = <&pm8350c_s1>; + vdd-l7-bob-supply = <&vreg_bob>; + + pmr735a_s1: smps1 { + regulator-name = "pmr735a_s1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1296000>; + }; + + pmr735a_s2: smps2 { + regulator-name = "pmr735a_s2"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1040000>; + }; + + pmr735a_s3: smps3 { + regulator-name = "pmr735a_s3"; + regulator-min-microvolt = <435000>; + regulator-max-microvolt = <2352000>; + }; + + pmr735a_l1: ldo1 { + regulator-name = "pmr735a_l1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + pmr735a_l2: ldo2 { + regulator-name = "pmr735a_l2"; + regulator-min-microvolt = <480000>; + regulator-max-microvolt = <912000>; + }; + + pmr735a_l3: ldo3 { + regulator-name = "pmr735a_l3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pmr735a_l4: ldo4 { + regulator-name = "pmr735a_l4"; + regulator-min-microvolt = <1776000>; + regulator-max-microvolt = <1776000>; + }; + + pmr735a_l5: ldo5 { + regulator-name = "pmr735a_l5"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + }; + + pmr735a_l6: ldo6 { + regulator-name = "pmr735a_l6"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pmr735a_l7: ldo7 { + regulator-name = "pmr735a_l7"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + }; +}; + +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&gpi_dma2 { + status = "okay"; +}; + +/* I2C4 is used, it hosts a Samsung touchscreen, but GPI DMA is broken.. */ + +&i2c5 { + clock-frequency = <400000>; + status = "okay"; + + /* Dialog SLG51000 CMIC @ 75 */ +}; + +&i2c9 { + clock-frequency = <400000>; + status = "okay"; + + /* NXP SN1X0 NFC @ 28 */ +}; + +&i2c13 { + clock-frequency = <400000>; + status = "okay"; + + /* Richwave RTC6226 FM Radio Receiver @ 64 */ +}; + +&i2c14 { + clock-frequency = <1000000>; + status = "okay"; + + cs35l41_l: speaker-amp@40 { + compatible = "cirrus,cs35l41"; + reg = <0x40>; + interrupt-parent = <&tlmm>; + interrupts = <182 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>; + cirrus,boost-peak-milliamp = <4000>; + cirrus,boost-ind-nanohenry = <1000>; + cirrus,boost-cap-microfarad = <15>; + cirrus,gpio2-src-select = <2>; + cirrus,gpio2-output-enable; + cirrus,asp-sdout-hiz = <3>; + #sound-dai-cells = <1>; + }; + + cs35l41_r: speaker-amp@41 { + compatible = "cirrus,cs35l41"; + reg = <0x41>; + interrupt-parent = <&tlmm>; + interrupts = <182 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>; + cirrus,boost-peak-milliamp = <4000>; + cirrus,boost-ind-nanohenry = <1000>; + cirrus,boost-cap-microfarad = <15>; + cirrus,gpio2-src-select = <2>; + cirrus,gpio2-output-enable; + cirrus,asp-sdout-hiz = <3>; + #sound-dai-cells = <1>; + }; +}; + +&i2c15 { + clock-frequency = <400000>; + status = "okay"; + + /* AMS TCS3490 RGB+IR color sensor @ 72 */ +}; + +&i2c19 { + clock-frequency = <1000000>; + status = "okay"; + + /* Cirrus Logic CS40L25A boosted haptics driver @ 40 */ +}; + +&pcie0 { + max-link-speed = <2>; + status = "okay"; +}; + +&pcie0_phy { + vdda-phy-supply = <&pm8350_l5>; + vdda-pll-supply = <&pm8350_l6>; + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/adsp.mbn"; + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/cdsp.mbn"; + status = "okay"; +}; + +&remoteproc_slpi { + firmware-name = "qcom/slpi.mbn"; + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&qupv3_id_2 { + status = "okay"; +}; + +&sdhc_2 { + cd-gpios = <&tlmm 92 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>; + pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_n>; + vmmc-supply = <&pm8350c_l9>; + vqmmc-supply = <&pm8350c_l6>; + no-sdio; + no-mmc; + status = "okay"; +}; + +&spi10 { + status = "okay"; + + /* NXP SN1X0 NFC Secure Element @ 0 */ +}; + +&tlmm { + gpio-reserved-ranges = <28 4>; + + sdc2_default_state: sdc2-default-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <16>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <16>; + bias-pull-up; + }; + }; + + ts_int_default: ts-int-default-state { + pins = "gpio23"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + input-enable; + }; + + sdc2_card_det_n: sd-card-det-n-state { + pins = "gpio92"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +&uart7 { + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&pm8350_l5>; + vdda18-supply = <&pm8350c_l1>; + vdda33-supply = <&pm8350_l2>; + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&pm8350_l6>; + vdda-pll-supply = <&pm8350_l1>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi new file mode 100644 index 000000000..128542582 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -0,0 +1,4119 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Linaro Limited + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <76800000>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32000>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo780"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; + L2_0: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo780"; + reg = <0x0 0x100>; + enable-method = "psci"; + next-level-cache = <&L2_100>; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; + L2_100: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "qcom,kryo780"; + reg = <0x0 0x200>; + enable-method = "psci"; + next-level-cache = <&L2_200>; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; + L2_200: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "qcom,kryo780"; + reg = <0x0 0x300>; + enable-method = "psci"; + next-level-cache = <&L2_300>; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; + L2_300: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "qcom,kryo780"; + reg = <0x0 0x400>; + enable-method = "psci"; + next-level-cache = <&L2_400>; + power-domains = <&CPU_PD4>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; + L2_400: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "qcom,kryo780"; + reg = <0x0 0x500>; + enable-method = "psci"; + next-level-cache = <&L2_500>; + power-domains = <&CPU_PD5>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; + L2_500: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "qcom,kryo780"; + reg = <0x0 0x600>; + enable-method = "psci"; + next-level-cache = <&L2_600>; + power-domains = <&CPU_PD6>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; + L2_600: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "qcom,kryo780"; + reg = <0x0 0x700>; + enable-method = "psci"; + next-level-cache = <&L2_700>; + power-domains = <&CPU_PD7>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 2>; + #cooling-cells = <2>; + L2_700: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + + core4 { + cpu = <&CPU4>; + }; + + core5 { + cpu = <&CPU5>; + }; + + core6 { + cpu = <&CPU6>; + }; + + core7 { + cpu = <&CPU7>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "silver-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <800>; + exit-latency-us = <750>; + min-residency-us = <4090>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "gold-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <600>; + exit-latency-us = <1550>; + min-residency-us = <4791>; + local-timer-stop; + }; + }; + + domain-idle-states { + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "domain-idle-state"; + idle-state-name = "cluster-l3-off"; + arm,psci-suspend-param = <0x41000044>; + entry-latency-us = <1050>; + exit-latency-us = <2500>; + min-residency-us = <5309>; + local-timer-stop; + }; + + CLUSTER_SLEEP_1: cluster-sleep-1 { + compatible = "domain-idle-state"; + idle-state-name = "cluster-power-collapse"; + arm,psci-suspend-param = <0x4100c344>; + entry-latency-us = <2700>; + exit-latency-us = <3500>; + min-residency-us = <13959>; + local-timer-stop; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-sm8450", "qcom,scm"; + interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>; + #reset-cells = <1>; + }; + }; + + clk_virt: interconnect-0 { + compatible = "qcom,sm8450-clk-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mc_virt: interconnect-1 { + compatible = "qcom,sm8450-mc-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + memory@a0000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0xa0000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = ; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + + CPU_PD0: cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD1: cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD2: cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD3: cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD4: cpu4 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD5: cpu5 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD6: cpu6 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD7: cpu7 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CLUSTER_PD: cpu-cluster0 { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP_0>, <&CLUSTER_SLEEP_1>; + }; + }; + + qup_opp_table_100mhz: opp-table-qup { + compatible = "operating-points-v2"; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: memory@80000000 { + reg = <0x0 0x80000000 0x0 0x600000>; + no-map; + }; + + xbl_dt_log_mem: memory@80600000 { + reg = <0x0 0x80600000 0x0 0x40000>; + no-map; + }; + + xbl_ramdump_mem: memory@80640000 { + reg = <0x0 0x80640000 0x0 0x180000>; + no-map; + }; + + xbl_sc_mem: memory@807c0000 { + reg = <0x0 0x807c0000 0x0 0x40000>; + no-map; + }; + + aop_image_mem: memory@80800000 { + reg = <0x0 0x80800000 0x0 0x60000>; + no-map; + }; + + aop_cmd_db_mem: memory@80860000 { + compatible = "qcom,cmd-db"; + reg = <0x0 0x80860000 0x0 0x20000>; + no-map; + }; + + aop_config_mem: memory@80880000 { + reg = <0x0 0x80880000 0x0 0x20000>; + no-map; + }; + + tme_crash_dump_mem: memory@808a0000 { + reg = <0x0 0x808a0000 0x0 0x40000>; + no-map; + }; + + tme_log_mem: memory@808e0000 { + reg = <0x0 0x808e0000 0x0 0x4000>; + no-map; + }; + + uefi_log_mem: memory@808e4000 { + reg = <0x0 0x808e4000 0x0 0x10000>; + no-map; + }; + + /* secdata region can be reused by apps */ + smem: memory@80900000 { + compatible = "qcom,smem"; + reg = <0x0 0x80900000 0x0 0x200000>; + hwlocks = <&tcsr_mutex 3>; + no-map; + }; + + cpucp_fw_mem: memory@80b00000 { + reg = <0x0 0x80b00000 0x0 0x100000>; + no-map; + }; + + cdsp_secure_heap: memory@80c00000 { + reg = <0x0 0x80c00000 0x0 0x4600000>; + no-map; + }; + + video_mem: memory@85700000 { + reg = <0x0 0x85700000 0x0 0x700000>; + no-map; + }; + + adsp_mem: memory@85e00000 { + reg = <0x0 0x85e00000 0x0 0x2100000>; + no-map; + }; + + slpi_mem: memory@88000000 { + reg = <0x0 0x88000000 0x0 0x1900000>; + no-map; + }; + + cdsp_mem: memory@89900000 { + reg = <0x0 0x89900000 0x0 0x2000000>; + no-map; + }; + + ipa_fw_mem: memory@8b900000 { + reg = <0x0 0x8b900000 0x0 0x10000>; + no-map; + }; + + ipa_gsi_mem: memory@8b910000 { + reg = <0x0 0x8b910000 0x0 0xa000>; + no-map; + }; + + gpu_micro_code_mem: memory@8b91a000 { + reg = <0x0 0x8b91a000 0x0 0x2000>; + no-map; + }; + + spss_region_mem: memory@8ba00000 { + reg = <0x0 0x8ba00000 0x0 0x180000>; + no-map; + }; + + /* First part of the "SPU secure shared memory" region */ + spu_tz_shared_mem: memory@8bb80000 { + reg = <0x0 0x8bb80000 0x0 0x60000>; + no-map; + }; + + /* Second part of the "SPU secure shared memory" region */ + spu_modem_shared_mem: memory@8bbe0000 { + reg = <0x0 0x8bbe0000 0x0 0x20000>; + no-map; + }; + + mpss_mem: memory@8bc00000 { + reg = <0x0 0x8bc00000 0x0 0x13200000>; + no-map; + }; + + cvp_mem: memory@9ee00000 { + reg = <0x0 0x9ee00000 0x0 0x700000>; + no-map; + }; + + camera_mem: memory@9f500000 { + reg = <0x0 0x9f500000 0x0 0x800000>; + no-map; + }; + + rmtfs_mem: memory@9fd00000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x9fd00000 0x0 0x280000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + + xbl_sc_mem2: memory@a6e00000 { + reg = <0x0 0xa6e00000 0x0 0x40000>; + no-map; + }; + + global_sync_mem: memory@a6f00000 { + reg = <0x0 0xa6f00000 0x0 0x100000>; + no-map; + }; + + /* uefi region can be reused by APPS */ + + /* Linux kernel image is loaded at 0xa0000000 */ + + oem_vm_mem: memory@bb000000 { + reg = <0x0 0xbb000000 0x0 0x5000000>; + no-map; + }; + + mte_mem: memory@c0000000 { + reg = <0x0 0xc0000000 0x0 0x20000000>; + no-map; + }; + + qheebsp_reserved_mem: memory@e0000000 { + reg = <0x0 0xe0000000 0x0 0x600000>; + no-map; + }; + + cpusys_vm_mem: memory@e0600000 { + reg = <0x0 0xe0600000 0x0 0x400000>; + no-map; + }; + + hyp_reserved_mem: memory@e0a00000 { + reg = <0x0 0xe0a00000 0x0 0x100000>; + no-map; + }; + + trust_ui_vm_mem: memory@e0b00000 { + reg = <0x0 0xe0b00000 0x0 0x4af3000>; + no-map; + }; + + trust_ui_vm_qrtr: memory@e55f3000 { + reg = <0x0 0xe55f3000 0x0 0x9000>; + no-map; + }; + + trust_ui_vm_vblk0_ring: memory@e55fc000 { + reg = <0x0 0xe55fc000 0x0 0x4000>; + no-map; + }; + + trust_ui_vm_swiotlb: memory@e5600000 { + reg = <0x0 0xe5600000 0x0 0x100000>; + no-map; + }; + + tz_stat_mem: memory@e8800000 { + reg = <0x0 0xe8800000 0x0 0x100000>; + no-map; + }; + + tags_mem: memory@e8900000 { + reg = <0x0 0xe8900000 0x0 0x1200000>; + no-map; + }; + + qtee_mem: memory@e9b00000 { + reg = <0x0 0xe9b00000 0x0 0x500000>; + no-map; + }; + + trusted_apps_mem: memory@ea000000 { + reg = <0x0 0xea000000 0x0 0x3900000>; + no-map; + }; + + trusted_apps_ext_mem: memory@ed900000 { + reg = <0x0 0xed900000 0x0 0x3b00000>; + no-map; + }; + }; + + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + smp2p_adsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_adsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-cdsp { + compatible = "qcom,smp2p"; + qcom,smem = <94>, <432>; + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + smp2p_cdsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_cdsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-modem { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + smp2p_modem_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_modem_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + ipa_smp2p_out: ipa-ap-to-modem { + qcom,entry-name = "ipa"; + #qcom,smem-state-cells = <1>; + }; + + ipa_smp2p_in: ipa-modem-to-ap { + qcom,entry-name = "ipa"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-slpi { + compatible = "qcom,smp2p"; + qcom,smem = <481>, <430>; + interrupts-extended = <&ipcc IPCC_CLIENT_SLPI + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_SLPI + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <3>; + + smp2p_slpi_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_slpi_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc@0 { + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + compatible = "simple-bus"; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-sm8450"; + reg = <0x0 0x00100000 0x0 0x1f4200>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&pcie0_lane>, + <&pcie1_lane>, + <&sleep_clk>; + clock-names = "bi_tcxo", + "pcie_0_pipe_clk", + "pcie_1_pipe_clk", + "sleep_clk"; + }; + + gpi_dma2: dma-controller@800000 { + compatible = "qcom,sm8450-gpi-dma"; + #dma-cells = <3>; + reg = <0 0x800000 0 0x60000>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + ; + dma-channels = <12>; + dma-channel-mask = <0x7e>; + iommus = <&apps_smmu 0x496 0x0>; + status = "disabled"; + }; + + qupv3_id_2: geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x008c0000 0x0 0x2000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; + iommus = <&apps_smmu 0x483 0x0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + i2c15: i2c@880000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00880000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c15_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>, + <&gpi_dma2 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi15: spi@880000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00880000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>; + spi-max-frequency = <50000000>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>, + <&gpi_dma2 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c16: i2c@884000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00884000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c16_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>, + <&gpi_dma2 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi16: spi@884000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00884000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi16_data_clk>, <&qup_spi16_cs>; + spi-max-frequency = <50000000>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>, + <&gpi_dma2 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c17: i2c@888000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00888000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c17_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>, + <&gpi_dma2 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi17: spi@888000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00888000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi17_data_clk>, <&qup_spi17_cs>; + spi-max-frequency = <50000000>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>, + <&gpi_dma2 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c18: i2c@88c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x0088c000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c18_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>, + <&gpi_dma2 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi18: spi@88c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0088c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi18_data_clk>, <&qup_spi18_cs>; + spi-max-frequency = <50000000>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>, + <&gpi_dma2 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c19: i2c@890000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00890000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c19_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>, + <&gpi_dma2 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi19: spi@890000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00890000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi19_data_clk>, <&qup_spi19_cs>; + spi-max-frequency = <50000000>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>, + <&gpi_dma2 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c20: i2c@894000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00894000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c20_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>, + <&gpi_dma2 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart20: serial@894000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00894000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart20_default>; + interrupts = ; + status = "disabled"; + }; + + spi20: spi@894000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00894000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi20_data_clk>, <&qup_spi20_cs>; + spi-max-frequency = <50000000>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>, + <&gpi_dma2 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c21: i2c@898000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00898000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c21_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma2 0 6 QCOM_GPI_I2C>, + <&gpi_dma2 1 6 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi21: spi@898000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00898000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi21_data_clk>, <&qup_spi21_cs>; + spi-max-frequency = <50000000>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma2 0 6 QCOM_GPI_SPI>, + <&gpi_dma2 1 6 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + gpi_dma0: dma-controller@900000 { + compatible = "qcom,sm8450-gpi-dma"; + #dma-cells = <3>; + reg = <0 0x900000 0 0x60000>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + ; + dma-channels = <12>; + dma-channel-mask = <0x7e>; + iommus = <&apps_smmu 0x5b6 0x0>; + status = "disabled"; + }; + + qupv3_id_0: geniqup@9c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x009c0000 0x0 0x2000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + iommus = <&apps_smmu 0x5a3 0x0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>; + interconnect-names = "qup-core"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + i2c0: i2c@980000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00980000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c0_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, + <&gpi_dma0 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi0: spi@980000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00980000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>; + power-domains = <&rpmhpd SM8450_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, + <&gpi_dma0 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@984000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00984000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c1_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, + <&gpi_dma0 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi1: spi@984000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00984000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, + <&gpi_dma0 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@988000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00988000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c2_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, + <&gpi_dma0 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi2: spi@988000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00988000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, + <&gpi_dma0 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + + i2c3: i2c@98c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x0098c000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c3_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, + <&gpi_dma0 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi3: spi@98c000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x0098c000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, + <&gpi_dma0 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@990000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00990000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c4_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, + <&gpi_dma0 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi4: spi@990000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00990000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>; + power-domains = <&rpmhpd SM8450_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, + <&gpi_dma0 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@994000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00994000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c5_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, + <&gpi_dma0 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi5: spi@994000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00994000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, + <&gpi_dma0 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + + i2c6: i2c@998000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x998000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c6_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>, + <&gpi_dma0 1 6 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi6: spi@998000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x998000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>, + <&gpi_dma0 1 6 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart7: serial@99c000 { + compatible = "qcom,geni-debug-uart"; + reg = <0 0x0099c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>; + interrupts = ; + status = "disabled"; + }; + }; + + gpi_dma1: dma-controller@a00000 { + compatible = "qcom,sm8450-gpi-dma"; + #dma-cells = <3>; + reg = <0 0xa00000 0 0x60000>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + ; + dma-channels = <12>; + dma-channel-mask = <0x7e>; + iommus = <&apps_smmu 0x56 0x0>; + status = "disabled"; + }; + + qupv3_id_1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x00ac0000 0x0 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + iommus = <&apps_smmu 0x43 0x0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>; + interconnect-names = "qup-core"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + i2c8: i2c@a80000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00a80000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c8_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, + <&gpi_dma1 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi8: spi@a80000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00a80000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, + <&gpi_dma1 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c9: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00a84000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c9_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, + <&gpi_dma1 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi9: spi@a84000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00a84000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, + <&gpi_dma1 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c10: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00a88000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c10_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, + <&gpi_dma1 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi10: spi@a88000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00a88000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, + <&gpi_dma1 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c11: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00a8c000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c11_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, + <&gpi_dma1 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi11: spi@a8c000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00a8c000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, + <&gpi_dma1 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c12: i2c@a90000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00a90000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c12_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, + <&gpi_dma1 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi12: spi@a90000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00a90000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, + <&gpi_dma1 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c13: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a94000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c13_data_clk>; + interrupts = ; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, + <&gpi_dma1 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi13: spi@a94000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00a94000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>, + <&gpi_dma1 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c14: i2c@a98000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a98000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c14_data_clk>; + interrupts = ; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>, + <&gpi_dma1 1 6 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi14: spi@a98000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00a98000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>, + <&gpi_dma1 1 6 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + pcie0: pci@1c00000 { + compatible = "qcom,pcie-sm8450-pcie0"; + reg = <0 0x01c00000 0 0x3000>, + <0 0x60000000 0 0xf1d>, + <0 0x60000f20 0 0xa8>, + <0 0x60001000 0 0x1000>, + <0 0x60100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; + + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, + <&gcc GCC_PCIE_0_PIPE_CLK_SRC>, + <&pcie0_lane>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>; + clock-names = "pipe", + "pipe_mux", + "phy_pipe", + "ref", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ddrss_sf_tbu", + "aggre0", + "aggre1"; + + iommus = <&apps_smmu 0x1c00 0x7f>; + iommu-map = <0x0 &apps_smmu 0x1c00 0x1>, + <0x100 &apps_smmu 0x1c01 0x1>; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_0_GDSC>; + power-domain-names = "gdsc"; + + phys = <&pcie0_lane>; + phy-names = "pciephy"; + + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_default_state>; + + status = "disabled"; + }; + + pcie0_phy: phy@1c06000 { + compatible = "qcom,sm8450-qmp-gen3x1-pcie-phy"; + reg = <0 0x01c06000 0 0x200>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_CLKREF_EN>, + <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "refgen"; + + resets = <&gcc GCC_PCIE_0_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie0_lane: phy@1c06200 { + reg = <0 0x1c06e00 0 0x200>, /* tx */ + <0 0x1c07000 0 0x200>, /* rx */ + <0 0x1c06200 0 0x200>, /* pcs */ + <0 0x1c06600 0 0x200>; /* pcs_pcie */ + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "pipe0"; + + #clock-cells = <0>; + #phy-cells = <0>; + clock-output-names = "pcie_0_pipe_clk"; + }; + }; + + pcie1: pci@1c08000 { + compatible = "qcom,pcie-sm8450-pcie1"; + reg = <0 0x01c08000 0 0x3000>, + <0 0x40000000 0 0xf1d>, + <0 0x40000f20 0 0xa8>, + <0 0x40001000 0 0x1000>, + <0 0x40100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + device_type = "pci"; + linux,pci-domain = <1>; + bus-range = <0x00 0xff>; + num-lanes = <2>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; + + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, + <&gcc GCC_PCIE_1_PIPE_CLK_SRC>, + <&pcie1_lane>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>; + clock-names = "pipe", + "pipe_mux", + "phy_pipe", + "ref", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ddrss_sf_tbu", + "aggre1"; + + iommus = <&apps_smmu 0x1c80 0x7f>; + iommu-map = <0x0 &apps_smmu 0x1c80 0x1>, + <0x100 &apps_smmu 0x1c81 0x1>; + + resets = <&gcc GCC_PCIE_1_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_1_GDSC>; + power-domain-names = "gdsc"; + + phys = <&pcie1_lane>; + phy-names = "pciephy"; + + perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_default_state>; + + status = "disabled"; + }; + + pcie1_phy: phy@1c0f000 { + compatible = "qcom,sm8450-qmp-gen4x2-pcie-phy"; + reg = <0 0x01c0f000 0 0x200>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_CLKREF_EN>, + <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "refgen"; + + resets = <&gcc GCC_PCIE_1_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie1_lane: phy@1c0e000 { + reg = <0 0x1c0e000 0 0x200>, /* tx */ + <0 0x1c0e200 0 0x300>, /* rx */ + <0 0x1c0f200 0 0x200>, /* pcs */ + <0 0x1c0e800 0 0x200>, /* tx */ + <0 0x1c0ea00 0 0x300>, /* rx */ + <0 0x1c0f400 0 0xc00>; /* pcs_pcie */ + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; + clock-names = "pipe0"; + + #clock-cells = <0>; + #phy-cells = <0>; + clock-output-names = "pcie_1_pipe_clk"; + }; + }; + + config_noc: interconnect@1500000 { + compatible = "qcom,sm8450-config-noc"; + reg = <0 0x01500000 0 0x1c000>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect@1680000 { + compatible = "qcom,sm8450-system-noc"; + reg = <0 0x01680000 0 0x1e200>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + pcie_noc: interconnect@16c0000 { + compatible = "qcom,sm8450-pcie-anoc"; + reg = <0 0x016c0000 0 0xe280>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre1_noc: interconnect@16e0000 { + compatible = "qcom,sm8450-aggre1-noc"; + reg = <0 0x016e0000 0 0x1c080>; + #interconnect-cells = <2>; + clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre2_noc: interconnect@1700000 { + compatible = "qcom,sm8450-aggre2-noc"; + reg = <0 0x01700000 0 0x31080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + clocks = <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&rpmhcc RPMH_IPA_CLK>; + }; + + mmss_noc: interconnect@1740000 { + compatible = "qcom,sm8450-mmss-noc"; + reg = <0 0x01740000 0 0x1f080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x01f40000 0x0 0x40000>; + #hwlock-cells = <1>; + }; + + usb_1_hsphy: phy@88e3000 { + compatible = "qcom,sm8450-usb-hs-phy", + "qcom,usb-snps-hs-7nm-phy"; + reg = <0 0x088e3000 0 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + }; + + usb_1_qmpphy: phy-wrapper@88e9000 { + compatible = "qcom,sm8450-qmp-usb3-phy"; + reg = <0 0x088e9000 0 0x200>, + <0 0x088e8000 0 0x20>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; + clock-names = "aux", "ref_clk_src", "com_aux"; + + resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, + <&gcc GCC_USB3_PHY_PRIM_BCR>; + reset-names = "phy", "common"; + + usb_1_ssphy: phy@88e9200 { + reg = <0 0x088e9200 0 0x200>, + <0 0x088e9400 0 0x200>, + <0 0x088e9c00 0 0x400>, + <0 0x088e9600 0 0x200>, + <0 0x088e9800 0 0x200>, + <0 0x088e9a00 0 0x100>; + #phy-cells = <0>; + #clock-cells = <0>; + clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_phy_pipe_clk_src"; + }; + }; + + remoteproc_slpi: remoteproc@2400000 { + compatible = "qcom,sm8450-slpi-pas"; + reg = <0 0x02400000 0 0x4000>; + + interrupts-extended = <&pdc 9 IRQ_TYPE_EDGE_RISING>, + <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SM8450_LCX>, + <&rpmhpd SM8450_LMX>; + power-domain-names = "lcx", "lmx"; + + memory-region = <&slpi_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_slpi_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_SLPI + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_SLPI + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "slpi"; + qcom,remote-pid = <3>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "sdsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x0541 0x0>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x0542 0x0>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x0543 0x0>; + /* note: shared-cb = <4> in downstream */ + }; + }; + }; + }; + + remoteproc_adsp: remoteproc@30000000 { + compatible = "qcom,sm8450-adsp-pas"; + reg = <0 0x030000000 0 0x100>; + + interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SM8450_LCX>, + <&rpmhpd SM8450_LMX>; + power-domain-names = "lcx", "lmx"; + + memory-region = <&adsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + remoteproc_adsp_glink: glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "lpass"; + qcom,remote-pid = <2>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "adsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1803 0x0>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1804 0x0>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x1805 0x0>; + }; + }; + }; + }; + + remoteproc_cdsp: remoteproc@32300000 { + compatible = "qcom,sm8450-cdsp-pas"; + reg = <0 0x032300000 0 0x1400000>; + + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SM8450_CX>, + <&rpmhpd SM8450_MXC>; + power-domain-names = "cx", "mxc"; + + memory-region = <&cdsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_cdsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "cdsp"; + qcom,remote-pid = <5>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "cdsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x2161 0x0400>, + <&apps_smmu 0x1021 0x1420>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x2162 0x0400>, + <&apps_smmu 0x1022 0x1420>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x2163 0x0400>, + <&apps_smmu 0x1023 0x1420>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x2164 0x0400>, + <&apps_smmu 0x1024 0x1420>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x2165 0x0400>, + <&apps_smmu 0x1025 0x1420>; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x2166 0x0400>, + <&apps_smmu 0x1026 0x1420>; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x2167 0x0400>, + <&apps_smmu 0x1027 0x1420>; + }; + + compute-cb@8 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <8>; + iommus = <&apps_smmu 0x2168 0x0400>, + <&apps_smmu 0x1028 0x1420>; + }; + + /* note: secure cb9 in downstream */ + }; + }; + }; + + remoteproc_mpss: remoteproc@4080000 { + compatible = "qcom,sm8450-mpss-pas"; + reg = <0x0 0x04080000 0x0 0x4040>; + + interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd 0>, + <&rpmhpd 12>; + power-domain-names = "cx", "mss"; + + memory-region = <&mpss_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_modem_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + label = "modem"; + qcom,remote-pid = <1>; + }; + }; + + camcc: clock-controller@ade0000 { + compatible = "qcom,sm8450-camcc"; + reg = <0 0x0ade0000 0 0x20000>; + clocks = <&gcc GCC_CAMERA_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>; + power-domains = <&rpmhpd SM8450_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + status = "disabled"; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,sm8450-pdc", "qcom,pdc"; + reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>; + qcom,pdc-ranges = <0 480 12>, <14 494 24>, <40 520 54>, + <94 609 31>, <125 63 1>, <126 716 12>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + tsens0: thermal-sensor@c263000 { + compatible = "qcom,sm8450-tsens", "qcom,tsens-v2"; + reg = <0 0x0c263000 0 0x1000>, /* TM */ + <0 0x0c222000 0 0x1000>; /* SROT */ + #qcom,sensors = <16>; + interrupts = , + ; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c265000 { + compatible = "qcom,sm8450-tsens", "qcom,tsens-v2"; + reg = <0 0x0c265000 0 0x1000>, /* TM */ + <0 0x0c223000 0 0x1000>; /* SROT */ + #qcom,sensors = <16>; + interrupts = , + ; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + aoss_qmp: power-controller@c300000 { + compatible = "qcom,sm8450-aoss-qmp", "qcom,aoss-qmp"; + reg = <0 0x0c300000 0 0x400>; + interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; + + #clock-cells = <0>; + }; + + ipcc: mailbox@ed18000 { + compatible = "qcom,sm8450-ipcc", "qcom,ipcc"; + reg = <0 0x0ed18000 0 0x1000>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <3>; + #mbox-cells = <2>; + }; + + tlmm: pinctrl@f100000 { + compatible = "qcom,sm8450-tlmm"; + reg = <0 0x0f100000 0 0x300000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 211>; + wakeup-parent = <&pdc>; + + sdc2_sleep_state: sdc2-sleep-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie0_default_state: pcie0-default-state { + perst-pins { + pins = "gpio94"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq-pins { + pins = "gpio95"; + function = "pcie0_clkreqn"; + drive-strength = <2>; + bias-pull-up; + }; + + wake-pins { + pins = "gpio96"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie1_default_state: pcie1-default-state { + perst-pins { + pins = "gpio97"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq-pins { + pins = "gpio98"; + function = "pcie1_clkreqn"; + drive-strength = <2>; + bias-pull-up; + }; + + wake-pins { + pins = "gpio99"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + qup_i2c0_data_clk: qup-i2c0-data-clk-state { + pins = "gpio0", "gpio1"; + function = "qup0"; + }; + + qup_i2c1_data_clk: qup-i2c1-data-clk-state { + pins = "gpio4", "gpio5"; + function = "qup1"; + }; + + qup_i2c2_data_clk: qup-i2c2-data-clk-state { + pins = "gpio8", "gpio9"; + function = "qup2"; + }; + + qup_i2c3_data_clk: qup-i2c3-data-clk-state { + pins = "gpio12", "gpio13"; + function = "qup3"; + }; + + qup_i2c4_data_clk: qup-i2c4-data-clk-state { + pins = "gpio16", "gpio17"; + function = "qup4"; + }; + + qup_i2c5_data_clk: qup-i2c5-data-clk-state { + pins = "gpio206", "gpio207"; + function = "qup5"; + }; + + qup_i2c6_data_clk: qup-i2c6-data-clk-state { + pins = "gpio20", "gpio21"; + function = "qup6"; + }; + + qup_i2c8_data_clk: qup-i2c8-data-clk-state { + pins = "gpio28", "gpio29"; + function = "qup8"; + }; + + qup_i2c9_data_clk: qup-i2c9-data-clk-state { + pins = "gpio32", "gpio33"; + function = "qup9"; + }; + + qup_i2c10_data_clk: qup-i2c10-data-clk-state { + pins = "gpio36", "gpio37"; + function = "qup10"; + }; + + qup_i2c11_data_clk: qup-i2c11-data-clk-state { + pins = "gpio40", "gpio41"; + function = "qup11"; + }; + + qup_i2c12_data_clk: qup-i2c12-data-clk-state { + pins = "gpio44", "gpio45"; + function = "qup12"; + }; + + qup_i2c13_data_clk: qup-i2c13-data-clk-state { + pins = "gpio48", "gpio49"; + function = "qup13"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c14_data_clk: qup-i2c14-data-clk-state { + pins = "gpio52", "gpio53"; + function = "qup14"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c15_data_clk: qup-i2c15-data-clk-state { + pins = "gpio56", "gpio57"; + function = "qup15"; + }; + + qup_i2c16_data_clk: qup-i2c16-data-clk-state { + pins = "gpio60", "gpio61"; + function = "qup16"; + }; + + qup_i2c17_data_clk: qup-i2c17-data-clk-state { + pins = "gpio64", "gpio65"; + function = "qup17"; + }; + + qup_i2c18_data_clk: qup-i2c18-data-clk-state { + pins = "gpio68", "gpio69"; + function = "qup18"; + }; + + qup_i2c19_data_clk: qup-i2c19-data-clk-state { + pins = "gpio72", "gpio73"; + function = "qup19"; + }; + + qup_i2c20_data_clk: qup-i2c20-data-clk-state { + pins = "gpio76", "gpio77"; + function = "qup20"; + }; + + qup_i2c21_data_clk: qup-i2c21-data-clk-state { + pins = "gpio80", "gpio81"; + function = "qup21"; + }; + + qup_spi0_cs: qup-spi0-cs-state { + pins = "gpio3"; + function = "qup0"; + }; + + qup_spi0_data_clk: qup-spi0-data-clk-state { + pins = "gpio0", "gpio1", "gpio2"; + function = "qup0"; + }; + + qup_spi1_cs: qup-spi1-cs-state { + pins = "gpio7"; + function = "qup1"; + }; + + qup_spi1_data_clk: qup-spi1-data-clk-state { + pins = "gpio4", "gpio5", "gpio6"; + function = "qup1"; + }; + + qup_spi2_cs: qup-spi2-cs-state { + pins = "gpio11"; + function = "qup2"; + }; + + qup_spi2_data_clk: qup-spi2-data-clk-state { + pins = "gpio8", "gpio9", "gpio10"; + function = "qup2"; + }; + + qup_spi3_cs: qup-spi3-cs-state { + pins = "gpio15"; + function = "qup3"; + }; + + qup_spi3_data_clk: qup-spi3-data-clk-state { + pins = "gpio12", "gpio13", "gpio14"; + function = "qup3"; + }; + + qup_spi4_cs: qup-spi4-cs-state { + pins = "gpio19"; + function = "qup4"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi4_data_clk: qup-spi4-data-clk-state { + pins = "gpio16", "gpio17", "gpio18"; + function = "qup4"; + }; + + qup_spi5_cs: qup-spi5-cs-state { + pins = "gpio85"; + function = "qup5"; + }; + + qup_spi5_data_clk: qup-spi5-data-clk-state { + pins = "gpio206", "gpio207", "gpio84"; + function = "qup5"; + }; + + qup_spi6_cs: qup-spi6-cs-state { + pins = "gpio23"; + function = "qup6"; + }; + + qup_spi6_data_clk: qup-spi6-data-clk-state { + pins = "gpio20", "gpio21", "gpio22"; + function = "qup6"; + }; + + qup_spi8_cs: qup-spi8-cs-state { + pins = "gpio31"; + function = "qup8"; + }; + + qup_spi8_data_clk: qup-spi8-data-clk-state { + pins = "gpio28", "gpio29", "gpio30"; + function = "qup8"; + }; + + qup_spi9_cs: qup-spi9-cs-state { + pins = "gpio35"; + function = "qup9"; + }; + + qup_spi9_data_clk: qup-spi9-data-clk-state { + pins = "gpio32", "gpio33", "gpio34"; + function = "qup9"; + }; + + qup_spi10_cs: qup-spi10-cs-state { + pins = "gpio39"; + function = "qup10"; + }; + + qup_spi10_data_clk: qup-spi10-data-clk-state { + pins = "gpio36", "gpio37", "gpio38"; + function = "qup10"; + }; + + qup_spi11_cs: qup-spi11-cs-state { + pins = "gpio43"; + function = "qup11"; + }; + + qup_spi11_data_clk: qup-spi11-data-clk-state { + pins = "gpio40", "gpio41", "gpio42"; + function = "qup11"; + }; + + qup_spi12_cs: qup-spi12-cs-state { + pins = "gpio47"; + function = "qup12"; + }; + + qup_spi12_data_clk: qup-spi12-data-clk-state { + pins = "gpio44", "gpio45", "gpio46"; + function = "qup12"; + }; + + qup_spi13_cs: qup-spi13-cs-state { + pins = "gpio51"; + function = "qup13"; + }; + + qup_spi13_data_clk: qup-spi13-data-clk-state { + pins = "gpio48", "gpio49", "gpio50"; + function = "qup13"; + }; + + qup_spi14_cs: qup-spi14-cs-state { + pins = "gpio55"; + function = "qup14"; + }; + + qup_spi14_data_clk: qup-spi14-data-clk-state { + pins = "gpio52", "gpio53", "gpio54"; + function = "qup14"; + }; + + qup_spi15_cs: qup-spi15-cs-state { + pins = "gpio59"; + function = "qup15"; + }; + + qup_spi15_data_clk: qup-spi15-data-clk-state { + pins = "gpio56", "gpio57", "gpio58"; + function = "qup15"; + }; + + qup_spi16_cs: qup-spi16-cs-state { + pins = "gpio63"; + function = "qup16"; + }; + + qup_spi16_data_clk: qup-spi16-data-clk-state { + pins = "gpio60", "gpio61", "gpio62"; + function = "qup16"; + }; + + qup_spi17_cs: qup-spi17-cs-state { + pins = "gpio67"; + function = "qup17"; + }; + + qup_spi17_data_clk: qup-spi17-data-clk-state { + pins = "gpio64", "gpio65", "gpio66"; + function = "qup17"; + }; + + qup_spi18_cs: qup-spi18-cs-state { + pins = "gpio71"; + function = "qup18"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi18_data_clk: qup-spi18-data-clk-state { + pins = "gpio68", "gpio69", "gpio70"; + function = "qup18"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi19_cs: qup-spi19-cs-state { + pins = "gpio75"; + function = "qup19"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi19_data_clk: qup-spi19-data-clk-state { + pins = "gpio72", "gpio73", "gpio74"; + function = "qup19"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi20_cs: qup-spi20-cs-state { + pins = "gpio79"; + function = "qup20"; + }; + + qup_spi20_data_clk: qup-spi20-data-clk-state { + pins = "gpio76", "gpio77", "gpio78"; + function = "qup20"; + }; + + qup_spi21_cs: qup-spi21-cs-state { + pins = "gpio83"; + function = "qup21"; + }; + + qup_spi21_data_clk: qup-spi21-data-clk-state { + pins = "gpio80", "gpio81", "gpio82"; + function = "qup21"; + }; + + qup_uart7_rx: qup-uart7-rx-state { + pins = "gpio26"; + function = "qup7"; + drive-strength = <2>; + bias-disable; + }; + + qup_uart7_tx: qup-uart7-tx-state { + pins = "gpio27"; + function = "qup7"; + drive-strength = <2>; + bias-disable; + }; + + qup_uart20_default: qup-uart20-default-state { + pins = "gpio76", "gpio77", "gpio78", "gpio79"; + function = "qup20"; + }; + + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,sm8450-smmu-500", "arm,mmu-500"; + reg = <0 0x15000000 0 0x100000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + }; + + intc: interrupt-controller@17100000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-controller; + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x40000>; + reg = <0x0 0x17100000 0x0 0x10000>, /* GICD */ + <0x0 0x17180000 0x0 0x200000>; /* GICR * 8 */ + interrupts = ; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gic_its: msi-controller@17140000 { + compatible = "arm,gic-v3-its"; + reg = <0x0 0x17140000 0x0 0x20000>; + msi-controller; + #msi-cells = <1>; + }; + }; + + timer@17420000 { + compatible = "arm,armv7-timer-mem"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0x20000000>; + reg = <0x0 0x17420000 0x0 0x1000>; + clock-frequency = <19200000>; + + frame@17421000 { + frame-number = <0>; + interrupts = , + ; + reg = <0x17421000 0x1000>, + <0x17422000 0x1000>; + }; + + frame@17423000 { + frame-number = <1>; + interrupts = ; + reg = <0x17423000 0x1000>; + status = "disabled"; + }; + + frame@17425000 { + frame-number = <2>; + interrupts = ; + reg = <0x17425000 0x1000>; + status = "disabled"; + }; + + frame@17427000 { + frame-number = <3>; + interrupts = ; + reg = <0x17427000 0x1000>; + status = "disabled"; + }; + + frame@17429000 { + frame-number = <4>; + interrupts = ; + reg = <0x17429000 0x1000>; + status = "disabled"; + }; + + frame@1742b000 { + frame-number = <5>; + interrupts = ; + reg = <0x1742b000 0x1000>; + status = "disabled"; + }; + + frame@1742d000 { + frame-number = <6>; + interrupts = ; + reg = <0x1742d000 0x1000>; + status = "disabled"; + }; + }; + + apps_rsc: rsc@17a00000 { + label = "apps_rsc"; + compatible = "qcom,rpmh-rsc"; + reg = <0x0 0x17a00000 0x0 0x10000>, + <0x0 0x17a10000 0x0 0x10000>, + <0x0 0x17a20000 0x0 0x10000>, + <0x0 0x17a30000 0x0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2", "drv-3"; + interrupts = , + , + ; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = , , + , ; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + + rpmhcc: clock-controller { + compatible = "qcom,sm8450-rpmh-clk"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board>; + }; + + rpmhpd: power-controller { + compatible = "qcom,sm8450-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = ; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = ; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = ; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = ; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = ; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = ; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = ; + }; + + rpmhpd_opp_nom_l2: opp8 { + opp-level = ; + }; + + rpmhpd_opp_turbo: opp9 { + opp-level = ; + }; + + rpmhpd_opp_turbo_l1: opp10 { + opp-level = ; + }; + }; + }; + }; + + cpufreq_hw: cpufreq@17d91000 { + compatible = "qcom,sm8450-cpufreq-epss", "qcom,cpufreq-epss"; + reg = <0 0x17d91000 0 0x1000>, + <0 0x17d92000 0 0x1000>, + <0 0x17d93000 0 0x1000>; + reg-names = "freq-domain0", "freq-domain1", "freq-domain2"; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; + clock-names = "xo", "alternate"; + interrupts = , + , + ; + interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1", "dcvsh-irq-2"; + #freq-domain-cells = <1>; + }; + + gem_noc: interconnect@19100000 { + compatible = "qcom,sm8450-gem-noc"; + reg = <0 0x19100000 0 0xbb800>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system-cache-controller@19200000 { + compatible = "qcom,sm8450-llcc"; + reg = <0 0x19200000 0 0x580000>, <0 0x19a00000 0 0x80000>; + reg-names = "llcc_base", "llcc_broadcast_base"; + interrupts = ; + }; + + ufs_mem_hc: ufshc@1d84000 { + compatible = "qcom,sm8450-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0 0x01d84000 0 0x3000>, + <0 0x01d88000 0 0x8000>; + reg-names = "std", "ice"; + interrupts = ; + phys = <&ufs_mem_phy_lanes>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + power-domains = <&gcc UFS_PHY_GDSC>; + + iommus = <&apps_smmu 0xe0 0x0>; + dma-coherent; + + interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>; + interconnect-names = "ufs-ddr", "cpu-ufs"; + clock-names = + "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk", + "ice_core_clk"; + clocks = + <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>, + <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; + freq-table-hz = + <75000000 300000000>, + <0 0>, + <0 0>, + <75000000 300000000>, + <75000000 300000000>, + <0 0>, + <0 0>, + <0 0>, + <75000000 300000000>; + status = "disabled"; + }; + + ufs_mem_phy: phy@1d87000 { + compatible = "qcom,sm8450-qmp-ufs-phy"; + reg = <0 0x01d87000 0 0x1c4>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clock-names = "ref", "ref_aux", "qref"; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, + <&gcc GCC_UFS_0_CLKREF_EN>; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + status = "disabled"; + + ufs_mem_phy_lanes: phy@1d87400 { + reg = <0 0x01d87400 0 0x188>, + <0 0x01d87600 0 0x200>, + <0 0x01d87c00 0 0x200>, + <0 0x01d87800 0 0x188>, + <0 0x01d87a00 0 0x200>; + #phy-cells = <0>; + }; + }; + + sdhc_2: sdhci@8804000 { + compatible = "qcom,sm8450-sdhci", "qcom,sdhci-msm-v5"; + reg = <0 0x08804000 0 0x1000>; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "core", "xo"; + resets = <&gcc GCC_SDCC2_BCR>; + interconnects = <&aggre2_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>; + interconnect-names = "sdhc-ddr","cpu-sdhc"; + iommus = <&apps_smmu 0x4a0 0x0>; + power-domains = <&rpmhpd SM8450_CX>; + operating-points-v2 = <&sdhc2_opp_table>; + bus-width = <4>; + dma-coherent; + + /* Forbid SDR104/SDR50 - broken hw! */ + sdhci-caps-mask = <0x3 0x0>; + + status = "disabled"; + + sdhc2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + usb_1: usb@a6f8800 { + compatible = "qcom,sm8450-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB3_0_CLKREF_EN>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "xo"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 15 IRQ_TYPE_EDGE_BOTH>, + <&pdc 14 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "hs_phy_irq", + "ss_phy_irq", + "dm_hs_phy_irq", + "dp_hs_phy_irq"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + usb_1_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xcd00>; + interrupts = ; + iommus = <&apps_smmu 0x0 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + nsp_noc: interconnect@320c0000 { + compatible = "qcom,sm8450-nsp-noc"; + reg = <0 0x320c0000 0 0x10000>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + lpass_ag_noc: interconnect@3c40000 { + compatible = "qcom,sm8450-lpass-ag-noc"; + reg = <0 0x3c40000 0 0x17200>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + }; + + thermal-zones { + aoss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 0>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpuss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 1>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpuss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 2>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpuss3-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 3>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpuss4-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 4>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpu4-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 5>; + + trips { + cpu4_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_top_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu4-bottom-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 6>; + + trips { + cpu4_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_bottom_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu5-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 7>; + + trips { + cpu5_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_top_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu5-bottom-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 8>; + + trips { + cpu5_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_bottom_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu6-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 9>; + + trips { + cpu6_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_top_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu6-bottom-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 10>; + + trips { + cpu6_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_bottom_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu7-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 11>; + + trips { + cpu7_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_top_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu7-middle-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 12>; + + trips { + cpu7_middle_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_middle_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_middle_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu7-bottom-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 13>; + + trips { + cpu7_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_bottom_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpu-top-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens0 14>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + gpu0_tj_cfg: tj_cfg { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + gpu-bottom-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens0 15>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + gpu1_tj_cfg: tj_cfg { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + aoss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 0>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpu0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 1>; + + trips { + cpu0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 2>; + + trips { + cpu1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 3>; + + trips { + cpu2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 4>; + + trips { + cpu3_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cdsp0-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens1 5>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cdsp_0_config: junction-config { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cdsp1-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens1 6>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cdsp_1_config: junction-config { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cdsp2-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens1 7>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cdsp_2_config: junction-config { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 8>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + mem-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens1 9>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + ddr_config0: ddr0-config { + temperature = <90000>; + hysteresis = <5000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + modem0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 10>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + mdmss0_config0: mdmss0-config0 { + temperature = <102000>; + hysteresis = <3000>; + type = "passive"; + }; + + mdmss0_config1: mdmss0-config1 { + temperature = <105000>; + hysteresis = <3000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + modem1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 11>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + mdmss1_config0: mdmss1-config0 { + temperature = <102000>; + hysteresis = <3000>; + type = "passive"; + }; + + mdmss1_config1: mdmss1-config1 { + temperature = <105000>; + hysteresis = <3000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + modem2-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 12>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + mdmss2_config0: mdmss2-config0 { + temperature = <102000>; + hysteresis = <3000>; + type = "passive"; + }; + + mdmss2_config1: mdmss2-config1 { + temperature = <105000>; + hysteresis = <3000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + modem3-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 13>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + mdmss3_config0: mdmss3-config0 { + temperature = <102000>; + hysteresis = <3000>; + type = "passive"; + }; + + mdmss3_config1: mdmss3-config1 { + temperature = <105000>; + hysteresis = <3000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + camera0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 14>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + camera1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 15>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + clock-frequency = <19200000>; + }; +}; -- cgit v1.2.3