From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- .../arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dts | 315 +++++++++++++++++++++ 1 file changed, 315 insertions(+) create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dts (limited to 'arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dts') diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dts new file mode 100644 index 000000000..b610e65e0 --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dts @@ -0,0 +1,315 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for KV260 revA Carrier Card + * + * (C) Copyright 2020 - 2021, Xilinx, Inc. + * + * SD level shifter: + * "A" – A01 board un-modified (NXP) + * "Y" – A01 board modified with legacy interposer (Nexperia) + * "Z" – A01 board modified with Diode interposer + * + * Michal Simek + */ + +#include +#include +#include +#include + +/dts-v1/; +/plugin/; + +&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */ + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1_default>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>; + + /* u14 - 0x40 - ina260 */ + /* u27 - 0xe0 - STDP4320 DP/HDMI splitter */ +}; + +&amba { + si5332_0: si5332_0 { /* u17 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + si5332_1: si5332_1 { /* u17 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + si5332_2: si5332_2 { /* u17 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + }; + + si5332_3: si5332_3 { /* u17 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; + + si5332_4: si5332_4 { /* u17 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + }; + + si5332_5: si5332_5 { /* u17 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + }; +}; + +/* DP/USB 3.0 and SATA */ +&psgtr { + status = "okay"; + /* pcie, usb3, sata */ + clocks = <&si5332_5>, <&si5332_4>, <&si5332_0>; + clock-names = "ref0", "ref1", "ref2"; +}; + +&sata { + status = "okay"; + /* SATA OOB timing settings */ + ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + phy-names = "sata-phy"; + phys = <&psgtr 3 PHY_TYPE_SATA 1 2>; +}; + +&zynqmp_dpsub { + status = "disabled"; + phy-names = "dp-phy0", "dp-phy1"; + phys = <&psgtr 1 PHY_TYPE_DP 0 0>, <&psgtr 0 PHY_TYPE_DP 1 0>; +}; + +&zynqmp_dpdma { + status = "okay"; +}; + +&usb0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 1>; + /* missing usb5744 - u43 */ +}; + +&dwc3_0 { + status = "okay"; + dr_mode = "host"; + snps,usb3_lpm_capable; + maximum-speed = "super-speed"; +}; + +&sdhci1 { /* on CC with tuned parameters */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci1_default>; + /* + * SD 3.0 requires level shifter and this property + * should be removed if the board has level shifter and + * need to work in UHS mode + */ + no-1-8-v; + disable-wp; + xlnx,mio-bank = <1>; +}; + +&gem3 { /* required by spec */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gem3_default>; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + reset-gpios = <&gpio 38 GPIO_ACTIVE_LOW>; + reset-delay-us = <2>; + + phy0: ethernet-phy@1 { + #phy-cells = <1>; + reg = <1>; + ti,rx-internal-delay = ; + ti,tx-internal-delay = ; + ti,fifo-depth = ; + ti,dp83867-rxctrl-strap-quirk; + }; + }; +}; + +&pinctrl0 { /* required by spec */ + status = "okay"; + + pinctrl_uart1_default: uart1-default { + conf { + groups = "uart1_9_grp"; + slew-rate = ; + power-source = ; + drive-strength = <12>; + }; + + conf-rx { + pins = "MIO37"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO36"; + bias-disable; + }; + + mux { + groups = "uart1_9_grp"; + function = "uart1"; + }; + }; + + pinctrl_i2c1_default: i2c1-default { + conf { + groups = "i2c1_6_grp"; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + + mux { + groups = "i2c1_6_grp"; + function = "i2c1"; + }; + }; + + pinctrl_i2c1_gpio: i2c1-gpio { + conf { + groups = "gpio0_24_grp", "gpio0_25_grp"; + slew-rate = ; + power-source = ; + }; + + mux { + groups = "gpio0_24_grp", "gpio0_25_grp"; + function = "gpio0"; + }; + }; + + pinctrl_gem3_default: gem3-default { + conf { + groups = "ethernet3_0_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO70", "MIO72", "MIO74"; + bias-high-impedance; + low-power-disable; + }; + + conf-bootstrap { + pins = "MIO71", "MIO73", "MIO75"; + bias-disable; + low-power-disable; + }; + + conf-tx { + pins = "MIO64", "MIO65", "MIO66", + "MIO67", "MIO68", "MIO69"; + bias-disable; + low-power-enable; + }; + + conf-mdio { + groups = "mdio3_0_grp"; + slew-rate = ; + power-source = ; + bias-disable; + }; + + mux-mdio { + function = "mdio3"; + groups = "mdio3_0_grp"; + }; + + mux { + function = "ethernet3"; + groups = "ethernet3_0_grp"; + }; + }; + + pinctrl_usb0_default: usb0-default { + conf { + groups = "usb0_0_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO52", "MIO53", "MIO55"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", + "MIO60", "MIO61", "MIO62", "MIO63"; + bias-disable; + }; + + mux { + groups = "usb0_0_grp"; + function = "usb0"; + }; + }; + + pinctrl_sdhci1_default: sdhci1-default { + conf { + groups = "sdio1_0_grp"; + slew-rate = ; + power-source = ; + bias-disable; + }; + + conf-cd { + groups = "sdio1_cd_0_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + + mux-cd { + groups = "sdio1_cd_0_grp"; + function = "sdio1_cd"; + }; + + mux { + groups = "sdio1_0_grp"; + function = "sdio1"; + }; + }; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; +}; -- cgit v1.2.3