From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/clocksource/i8253.c | 196 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 196 insertions(+) create mode 100644 drivers/clocksource/i8253.c (limited to 'drivers/clocksource/i8253.c') diff --git a/drivers/clocksource/i8253.c b/drivers/clocksource/i8253.c new file mode 100644 index 000000000..d4350bb10 --- /dev/null +++ b/drivers/clocksource/i8253.c @@ -0,0 +1,196 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * i8253 PIT clocksource + */ +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * Protects access to I/O ports + * + * 0040-0043 : timer0, i8253 / i8254 + * 0061-0061 : NMI Control Register which contains two speaker control bits. + */ +DEFINE_RAW_SPINLOCK(i8253_lock); +EXPORT_SYMBOL(i8253_lock); + +/* + * Handle PIT quirk in pit_shutdown() where zeroing the counter register + * restarts the PIT, negating the shutdown. On platforms with the quirk, + * platform specific code can set this to false. + */ +bool i8253_clear_counter_on_shutdown __ro_after_init = true; + +#ifdef CONFIG_CLKSRC_I8253 +/* + * Since the PIT overflows every tick, its not very useful + * to just read by itself. So use jiffies to emulate a free + * running counter: + */ +static u64 i8253_read(struct clocksource *cs) +{ + static int old_count; + static u32 old_jifs; + unsigned long flags; + int count; + u32 jifs; + + raw_spin_lock_irqsave(&i8253_lock, flags); + /* + * Although our caller may have the read side of jiffies_lock, + * this is now a seqlock, and we are cheating in this routine + * by having side effects on state that we cannot undo if + * there is a collision on the seqlock and our caller has to + * retry. (Namely, old_jifs and old_count.) So we must treat + * jiffies as volatile despite the lock. We read jiffies + * before latching the timer count to guarantee that although + * the jiffies value might be older than the count (that is, + * the counter may underflow between the last point where + * jiffies was incremented and the point where we latch the + * count), it cannot be newer. + */ + jifs = jiffies; + outb_p(0x00, PIT_MODE); /* latch the count ASAP */ + count = inb_p(PIT_CH0); /* read the latched count */ + count |= inb_p(PIT_CH0) << 8; + + /* VIA686a test code... reset the latch if count > max + 1 */ + if (count > PIT_LATCH) { + outb_p(0x34, PIT_MODE); + outb_p(PIT_LATCH & 0xff, PIT_CH0); + outb_p(PIT_LATCH >> 8, PIT_CH0); + count = PIT_LATCH - 1; + } + + /* + * It's possible for count to appear to go the wrong way for a + * couple of reasons: + * + * 1. The timer counter underflows, but we haven't handled the + * resulting interrupt and incremented jiffies yet. + * 2. Hardware problem with the timer, not giving us continuous time, + * the counter does small "jumps" upwards on some Pentium systems, + * (see c't 95/10 page 335 for Neptun bug.) + * + * Previous attempts to handle these cases intelligently were + * buggy, so we just do the simple thing now. + */ + if (count > old_count && jifs == old_jifs) + count = old_count; + + old_count = count; + old_jifs = jifs; + + raw_spin_unlock_irqrestore(&i8253_lock, flags); + + count = (PIT_LATCH - 1) - count; + + return (u64)(jifs * PIT_LATCH) + count; +} + +static struct clocksource i8253_cs = { + .name = "pit", + .rating = 110, + .read = i8253_read, + .mask = CLOCKSOURCE_MASK(32), +}; + +int __init clocksource_i8253_init(void) +{ + return clocksource_register_hz(&i8253_cs, PIT_TICK_RATE); +} +#endif + +#ifdef CONFIG_CLKEVT_I8253 +static int pit_shutdown(struct clock_event_device *evt) +{ + if (!clockevent_state_oneshot(evt) && !clockevent_state_periodic(evt)) + return 0; + + raw_spin_lock(&i8253_lock); + + outb_p(0x30, PIT_MODE); + + if (i8253_clear_counter_on_shutdown) { + outb_p(0, PIT_CH0); + outb_p(0, PIT_CH0); + } + + raw_spin_unlock(&i8253_lock); + return 0; +} + +static int pit_set_oneshot(struct clock_event_device *evt) +{ + raw_spin_lock(&i8253_lock); + outb_p(0x38, PIT_MODE); + raw_spin_unlock(&i8253_lock); + return 0; +} + +static int pit_set_periodic(struct clock_event_device *evt) +{ + raw_spin_lock(&i8253_lock); + + /* binary, mode 2, LSB/MSB, ch 0 */ + outb_p(0x34, PIT_MODE); + outb_p(PIT_LATCH & 0xff, PIT_CH0); /* LSB */ + outb_p(PIT_LATCH >> 8, PIT_CH0); /* MSB */ + + raw_spin_unlock(&i8253_lock); + return 0; +} + +/* + * Program the next event in oneshot mode + * + * Delta is given in PIT ticks + */ +static int pit_next_event(unsigned long delta, struct clock_event_device *evt) +{ + raw_spin_lock(&i8253_lock); + outb_p(delta & 0xff , PIT_CH0); /* LSB */ + outb_p(delta >> 8 , PIT_CH0); /* MSB */ + raw_spin_unlock(&i8253_lock); + + return 0; +} + +/* + * On UP the PIT can serve all of the possible timer functions. On SMP systems + * it can be solely used for the global tick. + */ +struct clock_event_device i8253_clockevent = { + .name = "pit", + .features = CLOCK_EVT_FEAT_PERIODIC, + .set_state_shutdown = pit_shutdown, + .set_state_periodic = pit_set_periodic, + .set_next_event = pit_next_event, +}; + +/* + * Initialize the conversion factor and the min/max deltas of the clock event + * structure and register the clock event source with the framework. + */ +void __init clockevent_i8253_init(bool oneshot) +{ + if (oneshot) { + i8253_clockevent.features |= CLOCK_EVT_FEAT_ONESHOT; + i8253_clockevent.set_state_oneshot = pit_set_oneshot; + } + /* + * Start pit with the boot cpu mask. x86 might make it global + * when it is used as broadcast device later. + */ + i8253_clockevent.cpumask = cpumask_of(smp_processor_id()); + + clockevents_config_and_register(&i8253_clockevent, PIT_TICK_RATE, + 0xF, 0x7FFF); +} +#endif -- cgit v1.2.3