From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/gpu/drm/msm/Kconfig | 165 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 165 insertions(+) create mode 100644 drivers/gpu/drm/msm/Kconfig (limited to 'drivers/gpu/drm/msm/Kconfig') diff --git a/drivers/gpu/drm/msm/Kconfig b/drivers/gpu/drm/msm/Kconfig new file mode 100644 index 000000000..3c9dfdb0b --- /dev/null +++ b/drivers/gpu/drm/msm/Kconfig @@ -0,0 +1,165 @@ +# SPDX-License-Identifier: GPL-2.0-only + +config DRM_MSM + tristate "MSM DRM" + depends on DRM + depends on ARCH_QCOM || SOC_IMX5 || COMPILE_TEST + depends on COMMON_CLK + depends on IOMMU_SUPPORT + depends on QCOM_OCMEM || QCOM_OCMEM=n + depends on QCOM_LLCC || QCOM_LLCC=n + depends on QCOM_COMMAND_DB || QCOM_COMMAND_DB=n + select IOMMU_IO_PGTABLE + select QCOM_MDT_LOADER if ARCH_QCOM + select REGULATOR + select DRM_DP_AUX_BUS + select DRM_DISPLAY_DP_HELPER + select DRM_DISPLAY_HELPER + select DRM_KMS_HELPER + select DRM_PANEL + select DRM_BRIDGE + select DRM_PANEL_BRIDGE + select DRM_SCHED + select SHMEM + select TMPFS + select QCOM_SCM + select WANT_DEV_COREDUMP + select SND_SOC_HDMI_CODEC if SND_SOC + select SYNC_FILE + select PM_OPP + select NVMEM + help + DRM/KMS driver for MSM/snapdragon. + +config DRM_MSM_GPU_STATE + bool + depends on DRM_MSM && (DEBUG_FS || DEV_COREDUMP) + default y + +config DRM_MSM_GPU_SUDO + bool "Enable SUDO flag on submits" + depends on DRM_MSM && EXPERT + default n + help + Enable userspace that has CAP_SYS_RAWIO to submit GPU commands + that are run from RB instead of IB1. This essentially gives + userspace kernel level access, but is useful for firmware + debugging. + + Only use this if you are a driver developer. This should *not* + be enabled for production kernels. If unsure, say N. + +config DRM_MSM_MDSS + bool + depends on DRM_MSM + default n + +config DRM_MSM_MDP4 + bool "Enable MDP4 support in MSM DRM driver" + depends on DRM_MSM + default y + help + Compile in support for the Mobile Display Processor v4 (MDP4) in + the MSM DRM driver. It is the older display controller found in + devices using APQ8064/MSM8960/MSM8x60 platforms. + +config DRM_MSM_MDP5 + bool "Enable MDP5 support in MSM DRM driver" + depends on DRM_MSM + select DRM_MSM_MDSS + default y + help + Compile in support for the Mobile Display Processor v5 (MDP5) in + the MSM DRM driver. It is the display controller found in devices + using e.g. APQ8016/MSM8916/APQ8096/MSM8996/MSM8974/SDM6x0 platforms. + +config DRM_MSM_DPU + bool "Enable DPU support in MSM DRM driver" + depends on DRM_MSM + select DRM_MSM_MDSS + default y + help + Compile in support for the Display Processing Unit in + the MSM DRM driver. It is the display controller found in devices + using e.g. SDM845 and newer platforms. + +config DRM_MSM_DP + bool "Enable DisplayPort support in MSM DRM driver" + depends on DRM_MSM + select RATIONAL + default y + help + Compile in support for DP driver in MSM DRM driver. DP external + display support is enabled through this config option. It can + be primary or secondary display on device. + +config DRM_MSM_DSI + bool "Enable DSI support in MSM DRM driver" + depends on DRM_MSM + select DRM_PANEL + select DRM_MIPI_DSI + default y + help + Choose this option if you have a need for MIPI DSI connector + support. + +config DRM_MSM_DSI_28NM_PHY + bool "Enable DSI 28nm PHY driver in MSM DRM" + depends on DRM_MSM_DSI + default y + help + Choose this option if the 28nm DSI PHY is used on the platform. + +config DRM_MSM_DSI_20NM_PHY + bool "Enable DSI 20nm PHY driver in MSM DRM" + depends on DRM_MSM_DSI + default y + help + Choose this option if the 20nm DSI PHY is used on the platform. + +config DRM_MSM_DSI_28NM_8960_PHY + bool "Enable DSI 28nm 8960 PHY driver in MSM DRM" + depends on DRM_MSM_DSI + default y + help + Choose this option if the 28nm DSI PHY 8960 variant is used on the + platform. + +config DRM_MSM_DSI_14NM_PHY + bool "Enable DSI 14nm PHY driver in MSM DRM (used by MSM8996/APQ8096)" + depends on DRM_MSM_DSI + default y + help + Choose this option if DSI PHY on 8996 is used on the platform. + +config DRM_MSM_DSI_10NM_PHY + bool "Enable DSI 10nm PHY driver in MSM DRM (used by SDM845)" + depends on DRM_MSM_DSI + default y + help + Choose this option if DSI PHY on SDM845 is used on the platform. + +config DRM_MSM_DSI_7NM_PHY + bool "Enable DSI 7nm PHY driver in MSM DRM" + depends on DRM_MSM_DSI + default y + help + Choose this option if DSI PHY on SM8150/SM8250/SC7280 is used on + the platform. + +config DRM_MSM_HDMI + bool "Enable HDMI support in MSM DRM driver" + depends on DRM_MSM + default y + help + Compile in support for the HDMI output MSM DRM driver. It can + be a primary or a secondary display on device. Note that this is used + only for the direct HDMI output. If the device outputs HDMI data + through some kind of DSI-to-HDMI bridge, this option can be disabled. + +config DRM_MSM_HDMI_HDCP + bool "Enable HDMI HDCP support in MSM DRM driver" + depends on DRM_MSM && DRM_MSM_HDMI + default y + help + Choose this option to enable HDCP state machine -- cgit v1.2.3