From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/iio/imu/bno055/bno055.c | 1685 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 1685 insertions(+) create mode 100644 drivers/iio/imu/bno055/bno055.c (limited to 'drivers/iio/imu/bno055/bno055.c') diff --git a/drivers/iio/imu/bno055/bno055.c b/drivers/iio/imu/bno055/bno055.c new file mode 100644 index 000000000..52744dd98 --- /dev/null +++ b/drivers/iio/imu/bno055/bno055.c @@ -0,0 +1,1685 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * IIO driver for Bosch BNO055 IMU + * + * Copyright (C) 2021-2022 Istituto Italiano di Tecnologia + * Electronic Design Laboratory + * Written by Andrea Merello + * + * Portions of this driver are taken from the BNO055 driver patch + * from Vlad Dogaru which is Copyright (c) 2016, Intel Corporation. + * + * This driver is also based on BMI160 driver, which is: + * Copyright (c) 2016, Intel Corporation. + * Copyright (c) 2019, Martin Kelly. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include "bno055.h" + +#define BNO055_FW_UID_FMT "bno055-caldata-%*phN.dat" +#define BNO055_FW_GENERIC_NAME "bno055-caldata.dat" + +/* common registers */ +#define BNO055_PAGESEL_REG 0x7 + +/* page 0 registers */ +#define BNO055_CHIP_ID_REG 0x0 +#define BNO055_CHIP_ID_MAGIC 0xA0 +#define BNO055_SW_REV_LSB_REG 0x4 +#define BNO055_SW_REV_MSB_REG 0x5 +#define BNO055_ACC_DATA_X_LSB_REG 0x8 +#define BNO055_ACC_DATA_Y_LSB_REG 0xA +#define BNO055_ACC_DATA_Z_LSB_REG 0xC +#define BNO055_MAG_DATA_X_LSB_REG 0xE +#define BNO055_MAG_DATA_Y_LSB_REG 0x10 +#define BNO055_MAG_DATA_Z_LSB_REG 0x12 +#define BNO055_GYR_DATA_X_LSB_REG 0x14 +#define BNO055_GYR_DATA_Y_LSB_REG 0x16 +#define BNO055_GYR_DATA_Z_LSB_REG 0x18 +#define BNO055_EUL_DATA_X_LSB_REG 0x1A +#define BNO055_EUL_DATA_Y_LSB_REG 0x1C +#define BNO055_EUL_DATA_Z_LSB_REG 0x1E +#define BNO055_QUAT_DATA_W_LSB_REG 0x20 +#define BNO055_LIA_DATA_X_LSB_REG 0x28 +#define BNO055_LIA_DATA_Y_LSB_REG 0x2A +#define BNO055_LIA_DATA_Z_LSB_REG 0x2C +#define BNO055_GRAVITY_DATA_X_LSB_REG 0x2E +#define BNO055_GRAVITY_DATA_Y_LSB_REG 0x30 +#define BNO055_GRAVITY_DATA_Z_LSB_REG 0x32 +#define BNO055_SCAN_CH_COUNT ((BNO055_GRAVITY_DATA_Z_LSB_REG - BNO055_ACC_DATA_X_LSB_REG) / 2) +#define BNO055_TEMP_REG 0x34 +#define BNO055_CALIB_STAT_REG 0x35 +#define BNO055_CALIB_STAT_MAGN_SHIFT 0 +#define BNO055_CALIB_STAT_ACCEL_SHIFT 2 +#define BNO055_CALIB_STAT_GYRO_SHIFT 4 +#define BNO055_CALIB_STAT_SYS_SHIFT 6 +#define BNO055_SYS_ERR_REG 0x3A +#define BNO055_POWER_MODE_REG 0x3E +#define BNO055_POWER_MODE_NORMAL 0 +#define BNO055_SYS_TRIGGER_REG 0x3F +#define BNO055_SYS_TRIGGER_RST_SYS BIT(5) +#define BNO055_SYS_TRIGGER_CLK_SEL BIT(7) +#define BNO055_OPR_MODE_REG 0x3D +#define BNO055_OPR_MODE_CONFIG 0x0 +#define BNO055_OPR_MODE_AMG 0x7 +#define BNO055_OPR_MODE_FUSION_FMC_OFF 0xB +#define BNO055_OPR_MODE_FUSION 0xC +#define BNO055_UNIT_SEL_REG 0x3B +/* Android orientation mode means: pitch value decreases turning clockwise */ +#define BNO055_UNIT_SEL_ANDROID BIT(7) +#define BNO055_UNIT_SEL_GYR_RPS BIT(1) +#define BNO055_CALDATA_START 0x55 +#define BNO055_CALDATA_END 0x6A +#define BNO055_CALDATA_LEN 22 + +/* + * The difference in address between the register that contains the + * value and the register that contains the offset. This applies for + * accel, gyro and magn channels. + */ +#define BNO055_REG_OFFSET_ADDR 0x4D + +/* page 1 registers */ +#define BNO055_PG1(x) ((x) | 0x80) +#define BNO055_ACC_CONFIG_REG BNO055_PG1(0x8) +#define BNO055_ACC_CONFIG_LPF_MASK GENMASK(4, 2) +#define BNO055_ACC_CONFIG_RANGE_MASK GENMASK(1, 0) +#define BNO055_MAG_CONFIG_REG BNO055_PG1(0x9) +#define BNO055_MAG_CONFIG_HIGHACCURACY 0x18 +#define BNO055_MAG_CONFIG_ODR_MASK GENMASK(2, 0) +#define BNO055_GYR_CONFIG_REG BNO055_PG1(0xA) +#define BNO055_GYR_CONFIG_RANGE_MASK GENMASK(2, 0) +#define BNO055_GYR_CONFIG_LPF_MASK GENMASK(5, 3) +#define BNO055_GYR_AM_SET_REG BNO055_PG1(0x1F) +#define BNO055_UID_LOWER_REG BNO055_PG1(0x50) +#define BNO055_UID_HIGHER_REG BNO055_PG1(0x5F) +#define BNO055_UID_LEN 16 + +struct bno055_sysfs_attr { + int *vals; + int len; + int *fusion_vals; + int *hw_xlate; + int type; +}; + +static int bno055_acc_lpf_vals[] = { + 7, 810000, 15, 630000, 31, 250000, 62, 500000, + 125, 0, 250, 0, 500, 0, 1000, 0, +}; + +static struct bno055_sysfs_attr bno055_acc_lpf = { + .vals = bno055_acc_lpf_vals, + .len = ARRAY_SIZE(bno055_acc_lpf_vals), + .fusion_vals = (int[]){62, 500000}, + .type = IIO_VAL_INT_PLUS_MICRO, +}; + +static int bno055_acc_range_vals[] = { + /* G: 2, 4, 8, 16 */ + 1962, 3924, 7848, 15696 +}; + +static struct bno055_sysfs_attr bno055_acc_range = { + .vals = bno055_acc_range_vals, + .len = ARRAY_SIZE(bno055_acc_range_vals), + .fusion_vals = (int[]){3924}, /* 4G */ + .type = IIO_VAL_INT, +}; + +/* + * Theoretically the IMU should return data in a given (i.e. fixed) unit + * regardless of the range setting. This happens for the accelerometer, but not + * for the gyroscope; the gyroscope range setting affects the scale. + * This is probably due to this[0] bug. + * For this reason we map the internal range setting onto the standard IIO scale + * attribute for gyro. + * Since the bug[0] may be fixed in future, we check for the IMU FW version and + * eventually warn the user. + * Currently we just don't care about "range" attributes for gyro. + * + * [0] https://community.bosch-sensortec.com/t5/MEMS-sensors-forum/BNO055-Wrong-sensitivity-resolution-in-datasheet/td-p/10266 + */ + +/* + * dps = hwval * (dps_range/2^15) + * rps = hwval * (rps_range/2^15) + * = hwval * (dps_range/(2^15 * k)) + * where k is rad-to-deg factor + */ +static int bno055_gyr_scale_vals[] = { + 125, 1877467, 250, 1877467, 500, 1877467, + 1000, 1877467, 2000, 1877467, +}; + +static struct bno055_sysfs_attr bno055_gyr_scale = { + .vals = bno055_gyr_scale_vals, + .len = ARRAY_SIZE(bno055_gyr_scale_vals), + .fusion_vals = (int[]){1, 900}, + .hw_xlate = (int[]){4, 3, 2, 1, 0}, + .type = IIO_VAL_FRACTIONAL, +}; + +static int bno055_gyr_lpf_vals[] = {12, 23, 32, 47, 64, 116, 230, 523}; +static struct bno055_sysfs_attr bno055_gyr_lpf = { + .vals = bno055_gyr_lpf_vals, + .len = ARRAY_SIZE(bno055_gyr_lpf_vals), + .fusion_vals = (int[]){32}, + .hw_xlate = (int[]){5, 4, 7, 3, 6, 2, 1, 0}, + .type = IIO_VAL_INT, +}; + +static int bno055_mag_odr_vals[] = {2, 6, 8, 10, 15, 20, 25, 30}; +static struct bno055_sysfs_attr bno055_mag_odr = { + .vals = bno055_mag_odr_vals, + .len = ARRAY_SIZE(bno055_mag_odr_vals), + .fusion_vals = (int[]){20}, + .type = IIO_VAL_INT, +}; + +struct bno055_priv { + struct regmap *regmap; + struct device *dev; + struct clk *clk; + int operation_mode; + int xfer_burst_break_thr; + struct mutex lock; + u8 uid[BNO055_UID_LEN]; + struct gpio_desc *reset_gpio; + bool sw_reset; + struct { + __le16 chans[BNO055_SCAN_CH_COUNT]; + s64 timestamp __aligned(8); + } buf; + struct dentry *debugfs; +}; + +static bool bno055_regmap_volatile(struct device *dev, unsigned int reg) +{ + /* data and status registers */ + if (reg >= BNO055_ACC_DATA_X_LSB_REG && reg <= BNO055_SYS_ERR_REG) + return true; + + /* when in fusion mode, config is updated by chip */ + if (reg == BNO055_MAG_CONFIG_REG || + reg == BNO055_ACC_CONFIG_REG || + reg == BNO055_GYR_CONFIG_REG) + return true; + + /* calibration data may be updated by the IMU */ + if (reg >= BNO055_CALDATA_START && reg <= BNO055_CALDATA_END) + return true; + + return false; +} + +static bool bno055_regmap_readable(struct device *dev, unsigned int reg) +{ + /* unnamed PG0 reserved areas */ + if ((reg < BNO055_PG1(0) && reg > BNO055_CALDATA_END) || + reg == 0x3C) + return false; + + /* unnamed PG1 reserved areas */ + if (reg > BNO055_PG1(BNO055_UID_HIGHER_REG) || + (reg < BNO055_PG1(BNO055_UID_LOWER_REG) && reg > BNO055_PG1(BNO055_GYR_AM_SET_REG)) || + reg == BNO055_PG1(0xE) || + (reg < BNO055_PG1(BNO055_PAGESEL_REG) && reg >= BNO055_PG1(0x0))) + return false; + return true; +} + +static bool bno055_regmap_writeable(struct device *dev, unsigned int reg) +{ + /* + * Unreadable registers are indeed reserved; there are no WO regs + * (except for a single bit in SYS_TRIGGER register) + */ + if (!bno055_regmap_readable(dev, reg)) + return false; + + /* data and status registers */ + if (reg >= BNO055_ACC_DATA_X_LSB_REG && reg <= BNO055_SYS_ERR_REG) + return false; + + /* ID areas */ + if (reg < BNO055_PAGESEL_REG || + (reg <= BNO055_UID_HIGHER_REG && reg >= BNO055_UID_LOWER_REG)) + return false; + + return true; +} + +static const struct regmap_range_cfg bno055_regmap_ranges[] = { + { + .range_min = 0, + .range_max = 0x7f * 2, + .selector_reg = BNO055_PAGESEL_REG, + .selector_mask = GENMASK(7, 0), + .selector_shift = 0, + .window_start = 0, + .window_len = 0x80, + }, +}; + +const struct regmap_config bno055_regmap_config = { + .name = "bno055", + .reg_bits = 8, + .val_bits = 8, + .ranges = bno055_regmap_ranges, + .num_ranges = 1, + .volatile_reg = bno055_regmap_volatile, + .max_register = 0x80 * 2, + .writeable_reg = bno055_regmap_writeable, + .readable_reg = bno055_regmap_readable, + .cache_type = REGCACHE_RBTREE, +}; +EXPORT_SYMBOL_NS_GPL(bno055_regmap_config, IIO_BNO055); + +/* must be called in configuration mode */ +static int bno055_calibration_load(struct bno055_priv *priv, const u8 *data, int len) +{ + if (len != BNO055_CALDATA_LEN) { + dev_dbg(priv->dev, "Invalid calibration file size %d (expected %d)", + len, BNO055_CALDATA_LEN); + return -EINVAL; + } + + dev_dbg(priv->dev, "loading cal data: %*ph", BNO055_CALDATA_LEN, data); + return regmap_bulk_write(priv->regmap, BNO055_CALDATA_START, + data, BNO055_CALDATA_LEN); +} + +static int bno055_operation_mode_do_set(struct bno055_priv *priv, + int operation_mode) +{ + int ret; + + ret = regmap_write(priv->regmap, BNO055_OPR_MODE_REG, + operation_mode); + if (ret) + return ret; + + /* Following datasheet specifications: sensor takes 7mS up to 19 mS to switch mode */ + msleep(20); + + return 0; +} + +static int bno055_system_reset(struct bno055_priv *priv) +{ + int ret; + + if (priv->reset_gpio) { + gpiod_set_value_cansleep(priv->reset_gpio, 0); + usleep_range(5000, 10000); + gpiod_set_value_cansleep(priv->reset_gpio, 1); + } else if (priv->sw_reset) { + ret = regmap_write(priv->regmap, BNO055_SYS_TRIGGER_REG, + BNO055_SYS_TRIGGER_RST_SYS); + if (ret) + return ret; + } else { + return 0; + } + + regcache_drop_region(priv->regmap, 0x0, 0xff); + usleep_range(650000, 700000); + + return 0; +} + +static int bno055_init(struct bno055_priv *priv, const u8 *caldata, int len) +{ + int ret; + + ret = bno055_operation_mode_do_set(priv, BNO055_OPR_MODE_CONFIG); + if (ret) + return ret; + + ret = regmap_write(priv->regmap, BNO055_POWER_MODE_REG, + BNO055_POWER_MODE_NORMAL); + if (ret) + return ret; + + ret = regmap_write(priv->regmap, BNO055_SYS_TRIGGER_REG, + priv->clk ? BNO055_SYS_TRIGGER_CLK_SEL : 0); + if (ret) + return ret; + + /* use standard SI units */ + ret = regmap_write(priv->regmap, BNO055_UNIT_SEL_REG, + BNO055_UNIT_SEL_ANDROID | BNO055_UNIT_SEL_GYR_RPS); + if (ret) + return ret; + + if (caldata) { + ret = bno055_calibration_load(priv, caldata, len); + if (ret) + dev_warn(priv->dev, "failed to load calibration data with error %d\n", + ret); + } + + return 0; +} + +static ssize_t bno055_operation_mode_set(struct bno055_priv *priv, + int operation_mode) +{ + u8 caldata[BNO055_CALDATA_LEN]; + int ret; + + mutex_lock(&priv->lock); + + ret = bno055_operation_mode_do_set(priv, BNO055_OPR_MODE_CONFIG); + if (ret) + goto exit_unlock; + + if (operation_mode == BNO055_OPR_MODE_FUSION || + operation_mode == BNO055_OPR_MODE_FUSION_FMC_OFF) { + /* for entering fusion mode, reset the chip to clear the algo state */ + ret = regmap_bulk_read(priv->regmap, BNO055_CALDATA_START, caldata, + BNO055_CALDATA_LEN); + if (ret) + goto exit_unlock; + + ret = bno055_system_reset(priv); + if (ret) + goto exit_unlock; + + ret = bno055_init(priv, caldata, BNO055_CALDATA_LEN); + if (ret) + goto exit_unlock; + } + + ret = bno055_operation_mode_do_set(priv, operation_mode); + if (ret) + goto exit_unlock; + + priv->operation_mode = operation_mode; + +exit_unlock: + mutex_unlock(&priv->lock); + return ret; +} + +static void bno055_uninit(void *arg) +{ + struct bno055_priv *priv = arg; + + /* stop the IMU */ + bno055_operation_mode_do_set(priv, BNO055_OPR_MODE_CONFIG); +} + +#define BNO055_CHANNEL(_type, _axis, _index, _address, _sep, _sh, _avail) { \ + .address = _address, \ + .type = _type, \ + .modified = 1, \ + .channel2 = IIO_MOD_##_axis, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | (_sep), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | (_sh), \ + .info_mask_shared_by_type_available = _avail, \ + .scan_index = _index, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 16, \ + .storagebits = 16, \ + .endianness = IIO_LE, \ + .repeat = IIO_MOD_##_axis == IIO_MOD_QUATERNION ? 4 : 0, \ + }, \ +} + +/* scan indexes follow DATA register order */ +enum bno055_scan_axis { + BNO055_SCAN_ACCEL_X, + BNO055_SCAN_ACCEL_Y, + BNO055_SCAN_ACCEL_Z, + BNO055_SCAN_MAGN_X, + BNO055_SCAN_MAGN_Y, + BNO055_SCAN_MAGN_Z, + BNO055_SCAN_GYRO_X, + BNO055_SCAN_GYRO_Y, + BNO055_SCAN_GYRO_Z, + BNO055_SCAN_YAW, + BNO055_SCAN_ROLL, + BNO055_SCAN_PITCH, + BNO055_SCAN_QUATERNION, + BNO055_SCAN_LIA_X, + BNO055_SCAN_LIA_Y, + BNO055_SCAN_LIA_Z, + BNO055_SCAN_GRAVITY_X, + BNO055_SCAN_GRAVITY_Y, + BNO055_SCAN_GRAVITY_Z, + BNO055_SCAN_TIMESTAMP, + _BNO055_SCAN_MAX +}; + +static const struct iio_chan_spec bno055_channels[] = { + /* accelerometer */ + BNO055_CHANNEL(IIO_ACCEL, X, BNO055_SCAN_ACCEL_X, + BNO055_ACC_DATA_X_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET), + BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), + BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY)), + BNO055_CHANNEL(IIO_ACCEL, Y, BNO055_SCAN_ACCEL_Y, + BNO055_ACC_DATA_Y_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET), + BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), + BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY)), + BNO055_CHANNEL(IIO_ACCEL, Z, BNO055_SCAN_ACCEL_Z, + BNO055_ACC_DATA_Z_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET), + BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), + BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY)), + /* gyroscope */ + BNO055_CHANNEL(IIO_ANGL_VEL, X, BNO055_SCAN_GYRO_X, + BNO055_GYR_DATA_X_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET), + BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), + BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY) | + BIT(IIO_CHAN_INFO_SCALE)), + BNO055_CHANNEL(IIO_ANGL_VEL, Y, BNO055_SCAN_GYRO_Y, + BNO055_GYR_DATA_Y_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET), + BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), + BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY) | + BIT(IIO_CHAN_INFO_SCALE)), + BNO055_CHANNEL(IIO_ANGL_VEL, Z, BNO055_SCAN_GYRO_Z, + BNO055_GYR_DATA_Z_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET), + BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), + BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY) | + BIT(IIO_CHAN_INFO_SCALE)), + /* magnetometer */ + BNO055_CHANNEL(IIO_MAGN, X, BNO055_SCAN_MAGN_X, + BNO055_MAG_DATA_X_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET), + BIT(IIO_CHAN_INFO_SAMP_FREQ), BIT(IIO_CHAN_INFO_SAMP_FREQ)), + BNO055_CHANNEL(IIO_MAGN, Y, BNO055_SCAN_MAGN_Y, + BNO055_MAG_DATA_Y_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET), + BIT(IIO_CHAN_INFO_SAMP_FREQ), BIT(IIO_CHAN_INFO_SAMP_FREQ)), + BNO055_CHANNEL(IIO_MAGN, Z, BNO055_SCAN_MAGN_Z, + BNO055_MAG_DATA_Z_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET), + BIT(IIO_CHAN_INFO_SAMP_FREQ), BIT(IIO_CHAN_INFO_SAMP_FREQ)), + /* euler angle */ + BNO055_CHANNEL(IIO_ROT, YAW, BNO055_SCAN_YAW, + BNO055_EUL_DATA_X_LSB_REG, 0, 0, 0), + BNO055_CHANNEL(IIO_ROT, ROLL, BNO055_SCAN_ROLL, + BNO055_EUL_DATA_Y_LSB_REG, 0, 0, 0), + BNO055_CHANNEL(IIO_ROT, PITCH, BNO055_SCAN_PITCH, + BNO055_EUL_DATA_Z_LSB_REG, 0, 0, 0), + /* quaternion */ + BNO055_CHANNEL(IIO_ROT, QUATERNION, BNO055_SCAN_QUATERNION, + BNO055_QUAT_DATA_W_LSB_REG, 0, 0, 0), + + /* linear acceleration */ + BNO055_CHANNEL(IIO_ACCEL, LINEAR_X, BNO055_SCAN_LIA_X, + BNO055_LIA_DATA_X_LSB_REG, 0, 0, 0), + BNO055_CHANNEL(IIO_ACCEL, LINEAR_Y, BNO055_SCAN_LIA_Y, + BNO055_LIA_DATA_Y_LSB_REG, 0, 0, 0), + BNO055_CHANNEL(IIO_ACCEL, LINEAR_Z, BNO055_SCAN_LIA_Z, + BNO055_LIA_DATA_Z_LSB_REG, 0, 0, 0), + + /* gravity vector */ + BNO055_CHANNEL(IIO_GRAVITY, X, BNO055_SCAN_GRAVITY_X, + BNO055_GRAVITY_DATA_X_LSB_REG, 0, 0, 0), + BNO055_CHANNEL(IIO_GRAVITY, Y, BNO055_SCAN_GRAVITY_Y, + BNO055_GRAVITY_DATA_Y_LSB_REG, 0, 0, 0), + BNO055_CHANNEL(IIO_GRAVITY, Z, BNO055_SCAN_GRAVITY_Z, + BNO055_GRAVITY_DATA_Z_LSB_REG, 0, 0, 0), + + { + .type = IIO_TEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + .scan_index = -1, + }, + IIO_CHAN_SOFT_TIMESTAMP(BNO055_SCAN_TIMESTAMP), +}; + +static int bno055_get_regmask(struct bno055_priv *priv, int *val, int *val2, + int reg, int mask, struct bno055_sysfs_attr *attr) +{ + const int shift = __ffs(mask); + int hwval, idx; + int ret; + int i; + + ret = regmap_read(priv->regmap, reg, &hwval); + if (ret) + return ret; + + idx = (hwval & mask) >> shift; + if (attr->hw_xlate) + for (i = 0; i < attr->len; i++) + if (attr->hw_xlate[i] == idx) { + idx = i; + break; + } + if (attr->type == IIO_VAL_INT) { + *val = attr->vals[idx]; + } else { /* IIO_VAL_INT_PLUS_MICRO or IIO_VAL_FRACTIONAL */ + *val = attr->vals[idx * 2]; + *val2 = attr->vals[idx * 2 + 1]; + } + + return attr->type; +} + +static int bno055_set_regmask(struct bno055_priv *priv, int val, int val2, + int reg, int mask, struct bno055_sysfs_attr *attr) +{ + const int shift = __ffs(mask); + int best_delta; + int req_val; + int tbl_val; + bool first; + int delta; + int hwval; + int ret; + int len; + int i; + + /* + * The closest value the HW supports is only one in fusion mode, + * and it is autoselected, so don't do anything, just return OK, + * as the closest possible value has been (virtually) selected + */ + if (priv->operation_mode != BNO055_OPR_MODE_AMG) + return 0; + + len = attr->len; + + /* + * We always get a request in INT_PLUS_MICRO, but we + * take care of the micro part only when we really have + * non-integer tables. This prevents 32-bit overflow with + * larger integers contained in integer tables. + */ + req_val = val; + if (attr->type != IIO_VAL_INT) { + len /= 2; + req_val = min(val, 2147) * 1000000 + val2; + } + + first = true; + for (i = 0; i < len; i++) { + switch (attr->type) { + case IIO_VAL_INT: + tbl_val = attr->vals[i]; + break; + case IIO_VAL_INT_PLUS_MICRO: + WARN_ON(attr->vals[i * 2] > 2147); + tbl_val = attr->vals[i * 2] * 1000000 + + attr->vals[i * 2 + 1]; + break; + case IIO_VAL_FRACTIONAL: + WARN_ON(attr->vals[i * 2] > 4294); + tbl_val = attr->vals[i * 2] * 1000000 / + attr->vals[i * 2 + 1]; + break; + default: + return -EINVAL; + } + delta = abs(tbl_val - req_val); + if (first || delta < best_delta) { + best_delta = delta; + hwval = i; + first = false; + } + } + + if (attr->hw_xlate) + hwval = attr->hw_xlate[hwval]; + + ret = bno055_operation_mode_do_set(priv, BNO055_OPR_MODE_CONFIG); + if (ret) + return ret; + + ret = regmap_update_bits(priv->regmap, reg, mask, hwval << shift); + if (ret) + return ret; + + return bno055_operation_mode_do_set(priv, BNO055_OPR_MODE_AMG); +} + +static int bno055_read_simple_chan(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct bno055_priv *priv = iio_priv(indio_dev); + __le16 raw_val; + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = regmap_bulk_read(priv->regmap, chan->address, + &raw_val, sizeof(raw_val)); + if (ret < 0) + return ret; + *val = sign_extend32(le16_to_cpu(raw_val), 15); + return IIO_VAL_INT; + case IIO_CHAN_INFO_OFFSET: + if (priv->operation_mode != BNO055_OPR_MODE_AMG) { + *val = 0; + } else { + ret = regmap_bulk_read(priv->regmap, + chan->address + + BNO055_REG_OFFSET_ADDR, + &raw_val, sizeof(raw_val)); + if (ret < 0) + return ret; + /* + * IMU reports sensor offsets; IIO wants correction + * offsets, thus we need the 'minus' here. + */ + *val = -sign_extend32(le16_to_cpu(raw_val), 15); + } + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + *val = 1; + switch (chan->type) { + case IIO_GRAVITY: + /* Table 3-35: 1 m/s^2 = 100 LSB */ + case IIO_ACCEL: + /* Table 3-17: 1 m/s^2 = 100 LSB */ + *val2 = 100; + break; + case IIO_MAGN: + /* + * Table 3-19: 1 uT = 16 LSB. But we need + * Gauss: 1G = 0.1 uT. + */ + *val2 = 160; + break; + case IIO_ANGL_VEL: + /* + * Table 3-22: 1 Rps = 900 LSB + * .. but this is not exactly true. See comment at the + * beginning of this file. + */ + if (priv->operation_mode != BNO055_OPR_MODE_AMG) { + *val = bno055_gyr_scale.fusion_vals[0]; + *val2 = bno055_gyr_scale.fusion_vals[1]; + return IIO_VAL_FRACTIONAL; + } + + return bno055_get_regmask(priv, val, val2, + BNO055_GYR_CONFIG_REG, + BNO055_GYR_CONFIG_RANGE_MASK, + &bno055_gyr_scale); + break; + case IIO_ROT: + /* Table 3-28: 1 degree = 16 LSB */ + *val2 = 16; + break; + default: + return -EINVAL; + } + return IIO_VAL_FRACTIONAL; + + case IIO_CHAN_INFO_SAMP_FREQ: + if (chan->type != IIO_MAGN) + return -EINVAL; + + return bno055_get_regmask(priv, val, val2, + BNO055_MAG_CONFIG_REG, + BNO055_MAG_CONFIG_ODR_MASK, + &bno055_mag_odr); + + case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: + switch (chan->type) { + case IIO_ANGL_VEL: + return bno055_get_regmask(priv, val, val2, + BNO055_GYR_CONFIG_REG, + BNO055_GYR_CONFIG_LPF_MASK, + &bno055_gyr_lpf); + case IIO_ACCEL: + return bno055_get_regmask(priv, val, val2, + BNO055_ACC_CONFIG_REG, + BNO055_ACC_CONFIG_LPF_MASK, + &bno055_acc_lpf); + default: + return -EINVAL; + } + + default: + return -EINVAL; + } +} + +static int bno055_sysfs_attr_avail(struct bno055_priv *priv, struct bno055_sysfs_attr *attr, + const int **vals, int *length) +{ + if (priv->operation_mode != BNO055_OPR_MODE_AMG) { + /* locked when fusion enabled */ + *vals = attr->fusion_vals; + if (attr->type == IIO_VAL_INT) + *length = 1; + else + *length = 2; /* IIO_VAL_INT_PLUS_MICRO or IIO_VAL_FRACTIONAL*/ + } else { + *vals = attr->vals; + *length = attr->len; + } + + return attr->type; +} + +static int bno055_read_avail(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + const int **vals, int *type, int *length, + long mask) +{ + struct bno055_priv *priv = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_ANGL_VEL: + *type = bno055_sysfs_attr_avail(priv, &bno055_gyr_scale, + vals, length); + return IIO_AVAIL_LIST; + default: + return -EINVAL; + } + case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: + switch (chan->type) { + case IIO_ANGL_VEL: + *type = bno055_sysfs_attr_avail(priv, &bno055_gyr_lpf, + vals, length); + return IIO_AVAIL_LIST; + case IIO_ACCEL: + *type = bno055_sysfs_attr_avail(priv, &bno055_acc_lpf, + vals, length); + return IIO_AVAIL_LIST; + default: + return -EINVAL; + } + + break; + case IIO_CHAN_INFO_SAMP_FREQ: + switch (chan->type) { + case IIO_MAGN: + *type = bno055_sysfs_attr_avail(priv, &bno055_mag_odr, + vals, length); + return IIO_AVAIL_LIST; + default: + return -EINVAL; + } + default: + return -EINVAL; + } +} + +static int bno055_read_temp_chan(struct iio_dev *indio_dev, int *val) +{ + struct bno055_priv *priv = iio_priv(indio_dev); + unsigned int raw_val; + int ret; + + ret = regmap_read(priv->regmap, BNO055_TEMP_REG, &raw_val); + if (ret < 0) + return ret; + + /* + * Tables 3-36 and 3-37: one byte of priv, signed, 1 LSB = 1C. + * ABI wants milliC. + */ + *val = raw_val * 1000; + + return IIO_VAL_INT; +} + +static int bno055_read_quaternion(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int size, int *vals, int *val_len, + long mask) +{ + struct bno055_priv *priv = iio_priv(indio_dev); + __le16 raw_vals[4]; + int i, ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + if (size < 4) + return -EINVAL; + ret = regmap_bulk_read(priv->regmap, + BNO055_QUAT_DATA_W_LSB_REG, + raw_vals, sizeof(raw_vals)); + if (ret < 0) + return ret; + for (i = 0; i < 4; i++) + vals[i] = sign_extend32(le16_to_cpu(raw_vals[i]), 15); + *val_len = 4; + return IIO_VAL_INT_MULTIPLE; + case IIO_CHAN_INFO_SCALE: + /* Table 3-31: 1 quaternion = 2^14 LSB */ + if (size < 2) + return -EINVAL; + vals[0] = 1; + vals[1] = 14; + return IIO_VAL_FRACTIONAL_LOG2; + default: + return -EINVAL; + } +} + +static bool bno055_is_chan_readable(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan) +{ + struct bno055_priv *priv = iio_priv(indio_dev); + + if (priv->operation_mode != BNO055_OPR_MODE_AMG) + return true; + + switch (chan->type) { + case IIO_GRAVITY: + case IIO_ROT: + return false; + case IIO_ACCEL: + if (chan->channel2 == IIO_MOD_LINEAR_X || + chan->channel2 == IIO_MOD_LINEAR_Y || + chan->channel2 == IIO_MOD_LINEAR_Z) + return false; + return true; + default: + return true; + } +} + +static int _bno055_read_raw_multi(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int size, int *vals, int *val_len, + long mask) +{ + if (!bno055_is_chan_readable(indio_dev, chan)) + return -EBUSY; + + switch (chan->type) { + case IIO_MAGN: + case IIO_ACCEL: + case IIO_ANGL_VEL: + case IIO_GRAVITY: + if (size < 2) + return -EINVAL; + *val_len = 2; + return bno055_read_simple_chan(indio_dev, chan, + &vals[0], &vals[1], + mask); + case IIO_TEMP: + *val_len = 1; + return bno055_read_temp_chan(indio_dev, &vals[0]); + case IIO_ROT: + /* + * Rotation is exposed as either a quaternion or three + * Euler angles. + */ + if (chan->channel2 == IIO_MOD_QUATERNION) + return bno055_read_quaternion(indio_dev, chan, + size, vals, + val_len, mask); + if (size < 2) + return -EINVAL; + *val_len = 2; + return bno055_read_simple_chan(indio_dev, chan, + &vals[0], &vals[1], + mask); + default: + return -EINVAL; + } +} + +static int bno055_read_raw_multi(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int size, int *vals, int *val_len, + long mask) +{ + struct bno055_priv *priv = iio_priv(indio_dev); + int ret; + + mutex_lock(&priv->lock); + ret = _bno055_read_raw_multi(indio_dev, chan, size, + vals, val_len, mask); + mutex_unlock(&priv->lock); + return ret; +} + +static int _bno055_write_raw(struct iio_dev *iio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct bno055_priv *priv = iio_priv(iio_dev); + + switch (chan->type) { + case IIO_MAGN: + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + return bno055_set_regmask(priv, val, val2, + BNO055_MAG_CONFIG_REG, + BNO055_MAG_CONFIG_ODR_MASK, + &bno055_mag_odr); + default: + return -EINVAL; + } + case IIO_ACCEL: + switch (mask) { + case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: + return bno055_set_regmask(priv, val, val2, + BNO055_ACC_CONFIG_REG, + BNO055_ACC_CONFIG_LPF_MASK, + &bno055_acc_lpf); + + default: + return -EINVAL; + } + case IIO_ANGL_VEL: + switch (mask) { + case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: + return bno055_set_regmask(priv, val, val2, + BNO055_GYR_CONFIG_REG, + BNO055_GYR_CONFIG_LPF_MASK, + &bno055_gyr_lpf); + case IIO_CHAN_INFO_SCALE: + return bno055_set_regmask(priv, val, val2, + BNO055_GYR_CONFIG_REG, + BNO055_GYR_CONFIG_RANGE_MASK, + &bno055_gyr_scale); + default: + return -EINVAL; + } + default: + return -EINVAL; + } +} + +static int bno055_write_raw(struct iio_dev *iio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct bno055_priv *priv = iio_priv(iio_dev); + int ret; + + mutex_lock(&priv->lock); + ret = _bno055_write_raw(iio_dev, chan, val, val2, mask); + mutex_unlock(&priv->lock); + + return ret; +} + +static ssize_t in_accel_range_raw_available_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev)); + int len = 0; + int i; + + if (priv->operation_mode != BNO055_OPR_MODE_AMG) + return sysfs_emit(buf, "%d\n", bno055_acc_range.fusion_vals[0]); + + for (i = 0; i < bno055_acc_range.len; i++) + len += sysfs_emit_at(buf, len, "%d ", bno055_acc_range.vals[i]); + buf[len - 1] = '\n'; + + return len; +} + +static ssize_t fusion_enable_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev)); + + return sysfs_emit(buf, "%d\n", + priv->operation_mode != BNO055_OPR_MODE_AMG); +} + +static ssize_t fusion_enable_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct bno055_priv *priv = iio_priv(indio_dev); + bool en; + int ret; + + if (indio_dev->active_scan_mask && + !bitmap_empty(indio_dev->active_scan_mask, _BNO055_SCAN_MAX)) + return -EBUSY; + + ret = kstrtobool(buf, &en); + if (ret) + return -EINVAL; + + if (!en) + return bno055_operation_mode_set(priv, BNO055_OPR_MODE_AMG) ?: len; + + /* + * Coming from AMG means the FMC was off, just switch to fusion but + * don't change anything that doesn't belong to us (i.e let FMC stay off). + * Coming from any other fusion mode means we don't need to do anything. + */ + if (priv->operation_mode == BNO055_OPR_MODE_AMG) + return bno055_operation_mode_set(priv, BNO055_OPR_MODE_FUSION_FMC_OFF) ?: len; + + return len; +} + +static ssize_t in_magn_calibration_fast_enable_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev)); + + return sysfs_emit(buf, "%d\n", + priv->operation_mode == BNO055_OPR_MODE_FUSION); +} + +static ssize_t in_magn_calibration_fast_enable_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct bno055_priv *priv = iio_priv(indio_dev); + int ret; + + if (indio_dev->active_scan_mask && + !bitmap_empty(indio_dev->active_scan_mask, _BNO055_SCAN_MAX)) + return -EBUSY; + + if (sysfs_streq(buf, "0")) { + if (priv->operation_mode == BNO055_OPR_MODE_FUSION) { + ret = bno055_operation_mode_set(priv, BNO055_OPR_MODE_FUSION_FMC_OFF); + if (ret) + return ret; + } + } else { + if (priv->operation_mode == BNO055_OPR_MODE_AMG) + return -EINVAL; + + if (priv->operation_mode != BNO055_OPR_MODE_FUSION) { + ret = bno055_operation_mode_set(priv, BNO055_OPR_MODE_FUSION); + if (ret) + return ret; + } + } + + return len; +} + +static ssize_t in_accel_range_raw_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev)); + int val; + int ret; + + ret = bno055_get_regmask(priv, &val, NULL, + BNO055_ACC_CONFIG_REG, + BNO055_ACC_CONFIG_RANGE_MASK, + &bno055_acc_range); + if (ret < 0) + return ret; + + return sysfs_emit(buf, "%d\n", val); +} + +static ssize_t in_accel_range_raw_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev)); + unsigned long val; + int ret; + + ret = kstrtoul(buf, 10, &val); + if (ret) + return ret; + + mutex_lock(&priv->lock); + ret = bno055_set_regmask(priv, val, 0, + BNO055_ACC_CONFIG_REG, + BNO055_ACC_CONFIG_RANGE_MASK, + &bno055_acc_range); + mutex_unlock(&priv->lock); + + return ret ?: len; +} + +static ssize_t bno055_get_calib_status(struct device *dev, char *buf, int which) +{ + struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev)); + int calib; + int ret; + int val; + + if (priv->operation_mode == BNO055_OPR_MODE_AMG || + (priv->operation_mode == BNO055_OPR_MODE_FUSION_FMC_OFF && + which == BNO055_CALIB_STAT_MAGN_SHIFT)) { + calib = 0; + } else { + mutex_lock(&priv->lock); + ret = regmap_read(priv->regmap, BNO055_CALIB_STAT_REG, &val); + mutex_unlock(&priv->lock); + + if (ret) + return -EIO; + + calib = ((val >> which) & GENMASK(1, 0)) + 1; + } + + return sysfs_emit(buf, "%d\n", calib); +} + +static ssize_t serialnumber_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev)); + + return sysfs_emit(buf, "%*ph\n", BNO055_UID_LEN, priv->uid); +} + +static ssize_t calibration_data_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, char *buf, + loff_t pos, size_t count) +{ + struct bno055_priv *priv = iio_priv(dev_to_iio_dev(kobj_to_dev(kobj))); + u8 data[BNO055_CALDATA_LEN]; + int ret; + + /* + * Calibration data is volatile; reading it in chunks will possibly + * results in inconsistent data. We require the user to read the whole + * blob in a single chunk + */ + if (count < BNO055_CALDATA_LEN || pos) + return -EINVAL; + + mutex_lock(&priv->lock); + ret = bno055_operation_mode_do_set(priv, BNO055_OPR_MODE_CONFIG); + if (ret) + goto exit_unlock; + + ret = regmap_bulk_read(priv->regmap, BNO055_CALDATA_START, data, + BNO055_CALDATA_LEN); + if (ret) + goto exit_unlock; + + ret = bno055_operation_mode_do_set(priv, priv->operation_mode); + if (ret) + goto exit_unlock; + + memcpy(buf, data, BNO055_CALDATA_LEN); + + ret = BNO055_CALDATA_LEN; +exit_unlock: + mutex_unlock(&priv->lock); + return ret; +} + +static ssize_t sys_calibration_auto_status_show(struct device *dev, + struct device_attribute *a, + char *buf) +{ + return bno055_get_calib_status(dev, buf, BNO055_CALIB_STAT_SYS_SHIFT); +} + +static ssize_t in_accel_calibration_auto_status_show(struct device *dev, + struct device_attribute *a, + char *buf) +{ + return bno055_get_calib_status(dev, buf, BNO055_CALIB_STAT_ACCEL_SHIFT); +} + +static ssize_t in_gyro_calibration_auto_status_show(struct device *dev, + struct device_attribute *a, + char *buf) +{ + return bno055_get_calib_status(dev, buf, BNO055_CALIB_STAT_GYRO_SHIFT); +} + +static ssize_t in_magn_calibration_auto_status_show(struct device *dev, + struct device_attribute *a, + char *buf) +{ + return bno055_get_calib_status(dev, buf, BNO055_CALIB_STAT_MAGN_SHIFT); +} + +static int bno055_debugfs_reg_access(struct iio_dev *iio_dev, unsigned int reg, + unsigned int writeval, unsigned int *readval) +{ + struct bno055_priv *priv = iio_priv(iio_dev); + + if (readval) + return regmap_read(priv->regmap, reg, readval); + else + return regmap_write(priv->regmap, reg, writeval); +} + +static ssize_t bno055_show_fw_version(struct file *file, char __user *userbuf, + size_t count, loff_t *ppos) +{ + struct bno055_priv *priv = file->private_data; + int rev, ver; + char *buf; + int ret; + + ret = regmap_read(priv->regmap, BNO055_SW_REV_LSB_REG, &rev); + if (ret) + return ret; + + ret = regmap_read(priv->regmap, BNO055_SW_REV_MSB_REG, &ver); + if (ret) + return ret; + + buf = kasprintf(GFP_KERNEL, "ver: 0x%x, rev: 0x%x\n", ver, rev); + if (!buf) + return -ENOMEM; + + ret = simple_read_from_buffer(userbuf, count, ppos, buf, strlen(buf)); + kfree(buf); + + return ret; +} + +static const struct file_operations bno055_fw_version_ops = { + .open = simple_open, + .read = bno055_show_fw_version, + .llseek = default_llseek, + .owner = THIS_MODULE, +}; + +static void bno055_debugfs_remove(void *_priv) +{ + struct bno055_priv *priv = _priv; + + debugfs_remove(priv->debugfs); + priv->debugfs = NULL; +} + +static void bno055_debugfs_init(struct iio_dev *iio_dev) +{ + struct bno055_priv *priv = iio_priv(iio_dev); + + priv->debugfs = debugfs_create_file("firmware_version", 0400, + iio_get_debugfs_dentry(iio_dev), + priv, &bno055_fw_version_ops); + if (!IS_ERR(priv->debugfs)) + devm_add_action_or_reset(priv->dev, bno055_debugfs_remove, + priv); + if (IS_ERR_OR_NULL(priv->debugfs)) + dev_warn(priv->dev, "failed to setup debugfs"); +} + +static IIO_DEVICE_ATTR_RW(fusion_enable, 0); +static IIO_DEVICE_ATTR_RW(in_magn_calibration_fast_enable, 0); +static IIO_DEVICE_ATTR_RW(in_accel_range_raw, 0); + +static IIO_DEVICE_ATTR_RO(in_accel_range_raw_available, 0); +static IIO_DEVICE_ATTR_RO(sys_calibration_auto_status, 0); +static IIO_DEVICE_ATTR_RO(in_accel_calibration_auto_status, 0); +static IIO_DEVICE_ATTR_RO(in_gyro_calibration_auto_status, 0); +static IIO_DEVICE_ATTR_RO(in_magn_calibration_auto_status, 0); +static IIO_DEVICE_ATTR_RO(serialnumber, 0); + +static struct attribute *bno055_attrs[] = { + &iio_dev_attr_in_accel_range_raw_available.dev_attr.attr, + &iio_dev_attr_in_accel_range_raw.dev_attr.attr, + &iio_dev_attr_fusion_enable.dev_attr.attr, + &iio_dev_attr_in_magn_calibration_fast_enable.dev_attr.attr, + &iio_dev_attr_sys_calibration_auto_status.dev_attr.attr, + &iio_dev_attr_in_accel_calibration_auto_status.dev_attr.attr, + &iio_dev_attr_in_gyro_calibration_auto_status.dev_attr.attr, + &iio_dev_attr_in_magn_calibration_auto_status.dev_attr.attr, + &iio_dev_attr_serialnumber.dev_attr.attr, + NULL +}; + +static BIN_ATTR_RO(calibration_data, BNO055_CALDATA_LEN); + +static struct bin_attribute *bno055_bin_attrs[] = { + &bin_attr_calibration_data, + NULL +}; + +static const struct attribute_group bno055_attrs_group = { + .attrs = bno055_attrs, + .bin_attrs = bno055_bin_attrs, +}; + +static const struct iio_info bno055_info = { + .read_raw_multi = bno055_read_raw_multi, + .read_avail = bno055_read_avail, + .write_raw = bno055_write_raw, + .attrs = &bno055_attrs_group, + .debugfs_reg_access = bno055_debugfs_reg_access, +}; + +/* + * Reads len samples from the HW, stores them in buf starting from buf_idx, + * and applies mask to cull (skip) unneeded samples. + * Updates buf_idx incrementing with the number of stored samples. + * Samples from HW are transferred into buf, then in-place copy on buf is + * performed in order to cull samples that need to be skipped. + * This avoids copies of the first samples until we hit the 1st sample to skip, + * and also avoids having an extra bounce buffer. + * buf must be able to contain len elements in spite of how many samples we are + * going to cull. + */ +static int bno055_scan_xfer(struct bno055_priv *priv, + int start_ch, int len, unsigned long mask, + __le16 *buf, int *buf_idx) +{ + const int base = BNO055_ACC_DATA_X_LSB_REG; + bool quat_in_read = false; + int buf_base = *buf_idx; + __le16 *dst, *src; + int offs_fixup = 0; + int xfer_len = len; + int ret; + int i, n; + + if (!mask) + return 0; + + /* + * All channels are made up 1 16-bit sample, except for quaternion that + * is made up 4 16-bit values. + * For us the quaternion CH is just like 4 regular CHs. + * If our read starts past the quaternion make sure to adjust the + * starting offset; if the quaternion is contained in our scan then make + * sure to adjust the read len. + */ + if (start_ch > BNO055_SCAN_QUATERNION) { + start_ch += 3; + } else if ((start_ch <= BNO055_SCAN_QUATERNION) && + ((start_ch + len) > BNO055_SCAN_QUATERNION)) { + quat_in_read = true; + xfer_len += 3; + } + + ret = regmap_bulk_read(priv->regmap, + base + start_ch * sizeof(__le16), + buf + buf_base, + xfer_len * sizeof(__le16)); + if (ret) + return ret; + + for_each_set_bit(i, &mask, len) { + if (quat_in_read && ((start_ch + i) > BNO055_SCAN_QUATERNION)) + offs_fixup = 3; + + dst = buf + *buf_idx; + src = buf + buf_base + offs_fixup + i; + + n = (start_ch + i == BNO055_SCAN_QUATERNION) ? 4 : 1; + + if (dst != src) + memcpy(dst, src, n * sizeof(__le16)); + + *buf_idx += n; + } + return 0; +} + +static irqreturn_t bno055_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *iio_dev = pf->indio_dev; + struct bno055_priv *priv = iio_priv(iio_dev); + int xfer_start, start, end, prev_end; + unsigned long mask; + int quat_extra_len; + bool first = true; + int buf_idx = 0; + bool thr_hit; + int ret; + + mutex_lock(&priv->lock); + + /* + * Walk the bitmap and eventually perform several transfers. + * Bitmap ones-fields that are separated by gaps <= xfer_burst_break_thr + * will be included in same transfer. + * Every time the bitmap contains a gap wider than xfer_burst_break_thr + * then we split the transfer, skipping the gap. + */ + for_each_set_bitrange(start, end, iio_dev->active_scan_mask, + iio_dev->masklength) { + /* + * First transfer will start from the beginning of the first + * ones-field in the bitmap + */ + if (first) { + xfer_start = start; + } else { + /* + * We found the next ones-field; check whether to + * include it in * the current transfer or not (i.e. + * let's perform the current * transfer and prepare for + * another one). + */ + + /* + * In case the zeros-gap contains the quaternion bit, + * then its length is actually 4 words instead of 1 + * (i.e. +3 wrt other channels). + */ + quat_extra_len = ((start > BNO055_SCAN_QUATERNION) && + (prev_end <= BNO055_SCAN_QUATERNION)) ? 3 : 0; + + /* If the gap is wider than xfer_burst_break_thr then.. */ + thr_hit = (start - prev_end + quat_extra_len) > + priv->xfer_burst_break_thr; + + /* + * .. transfer all the data up to the gap. Then set the + * next transfer start index at right after the gap + * (i.e. at the start of this ones-field). + */ + if (thr_hit) { + mask = *iio_dev->active_scan_mask >> xfer_start; + ret = bno055_scan_xfer(priv, xfer_start, + prev_end - xfer_start, + mask, priv->buf.chans, &buf_idx); + if (ret) + goto done; + xfer_start = start; + } + } + first = false; + prev_end = end; + } + + /* + * We finished walking the bitmap; no more gaps to check for. Just + * perform the current transfer. + */ + mask = *iio_dev->active_scan_mask >> xfer_start; + ret = bno055_scan_xfer(priv, xfer_start, + prev_end - xfer_start, + mask, priv->buf.chans, &buf_idx); + + if (!ret) + iio_push_to_buffers_with_timestamp(iio_dev, + &priv->buf, pf->timestamp); +done: + mutex_unlock(&priv->lock); + iio_trigger_notify_done(iio_dev->trig); + return IRQ_HANDLED; +} + +static int bno055_buffer_preenable(struct iio_dev *indio_dev) +{ + struct bno055_priv *priv = iio_priv(indio_dev); + const unsigned long fusion_mask = + BIT(BNO055_SCAN_YAW) | + BIT(BNO055_SCAN_ROLL) | + BIT(BNO055_SCAN_PITCH) | + BIT(BNO055_SCAN_QUATERNION) | + BIT(BNO055_SCAN_LIA_X) | + BIT(BNO055_SCAN_LIA_Y) | + BIT(BNO055_SCAN_LIA_Z) | + BIT(BNO055_SCAN_GRAVITY_X) | + BIT(BNO055_SCAN_GRAVITY_Y) | + BIT(BNO055_SCAN_GRAVITY_Z); + + if (priv->operation_mode == BNO055_OPR_MODE_AMG && + bitmap_intersects(indio_dev->active_scan_mask, &fusion_mask, + _BNO055_SCAN_MAX)) + return -EBUSY; + return 0; +} + +static const struct iio_buffer_setup_ops bno055_buffer_setup_ops = { + .preenable = bno055_buffer_preenable, +}; + +int bno055_probe(struct device *dev, struct regmap *regmap, + int xfer_burst_break_thr, bool sw_reset) +{ + const struct firmware *caldata = NULL; + struct bno055_priv *priv; + struct iio_dev *iio_dev; + char *fw_name_buf; + unsigned int val; + int rev, ver; + int ret; + + iio_dev = devm_iio_device_alloc(dev, sizeof(*priv)); + if (!iio_dev) + return -ENOMEM; + + iio_dev->name = "bno055"; + priv = iio_priv(iio_dev); + mutex_init(&priv->lock); + priv->regmap = regmap; + priv->dev = dev; + priv->xfer_burst_break_thr = xfer_burst_break_thr; + priv->sw_reset = sw_reset; + + priv->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(priv->reset_gpio)) + return dev_err_probe(dev, PTR_ERR(priv->reset_gpio), "Failed to get reset GPIO\n"); + + priv->clk = devm_clk_get_optional_enabled(dev, "clk"); + if (IS_ERR(priv->clk)) + return dev_err_probe(dev, PTR_ERR(priv->clk), "Failed to get CLK\n"); + + if (priv->reset_gpio) { + usleep_range(5000, 10000); + gpiod_set_value_cansleep(priv->reset_gpio, 1); + usleep_range(650000, 750000); + } else if (!sw_reset) { + dev_warn(dev, "No usable reset method; IMU may be unreliable\n"); + } + + ret = regmap_read(priv->regmap, BNO055_CHIP_ID_REG, &val); + if (ret) + return ret; + + if (val != BNO055_CHIP_ID_MAGIC) + dev_warn(dev, "Unrecognized chip ID 0x%x\n", val); + + /* + * In case we haven't a HW reset pin, we can still reset the chip via + * register write. This is probably nonsense in case we can't even + * communicate with the chip or the chip isn't the one we expect (i.e. + * we don't write to unknown chips), so we perform SW reset only after + * chip magic ID check + */ + if (!priv->reset_gpio) { + ret = bno055_system_reset(priv); + if (ret) + return ret; + } + + ret = regmap_read(priv->regmap, BNO055_SW_REV_LSB_REG, &rev); + if (ret) + return ret; + + ret = regmap_read(priv->regmap, BNO055_SW_REV_MSB_REG, &ver); + if (ret) + return ret; + + /* + * The stock FW version contains a bug (see comment at the beginning of + * this file) that causes the anglvel scale to be changed depending on + * the chip range setting. We workaround this, but we don't know what + * other FW versions might do. + */ + if (ver != 0x3 || rev != 0x11) + dev_warn(dev, "Untested firmware version. Anglvel scale may not work as expected\n"); + + ret = regmap_bulk_read(priv->regmap, BNO055_UID_LOWER_REG, + priv->uid, BNO055_UID_LEN); + if (ret) + return ret; + + /* Sensor calibration data */ + fw_name_buf = kasprintf(GFP_KERNEL, BNO055_FW_UID_FMT, + BNO055_UID_LEN, priv->uid); + if (!fw_name_buf) + return -ENOMEM; + + ret = request_firmware(&caldata, fw_name_buf, dev); + kfree(fw_name_buf); + if (ret) + ret = request_firmware(&caldata, BNO055_FW_GENERIC_NAME, dev); + if (ret) { + dev_notice(dev, "Calibration file load failed. See instruction in kernel Documentation/iio/bno055.rst\n"); + ret = bno055_init(priv, NULL, 0); + } else { + ret = bno055_init(priv, caldata->data, caldata->size); + release_firmware(caldata); + } + if (ret) + return ret; + + priv->operation_mode = BNO055_OPR_MODE_FUSION; + ret = bno055_operation_mode_do_set(priv, priv->operation_mode); + if (ret) + return ret; + + ret = devm_add_action_or_reset(dev, bno055_uninit, priv); + if (ret) + return ret; + + iio_dev->channels = bno055_channels; + iio_dev->num_channels = ARRAY_SIZE(bno055_channels); + iio_dev->info = &bno055_info; + iio_dev->modes = INDIO_DIRECT_MODE; + + ret = devm_iio_triggered_buffer_setup(dev, iio_dev, + iio_pollfunc_store_time, + bno055_trigger_handler, + &bno055_buffer_setup_ops); + if (ret) + return ret; + + ret = devm_iio_device_register(dev, iio_dev); + if (ret) + return ret; + + bno055_debugfs_init(iio_dev); + + return 0; +} +EXPORT_SYMBOL_NS_GPL(bno055_probe, IIO_BNO055); + +MODULE_AUTHOR("Andrea Merello "); +MODULE_DESCRIPTION("Bosch BNO055 driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3