From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/infiniband/hw/hfi1/eprom.c | 450 +++++++++++++++++++++++++++++++++++++ 1 file changed, 450 insertions(+) create mode 100644 drivers/infiniband/hw/hfi1/eprom.c (limited to 'drivers/infiniband/hw/hfi1/eprom.c') diff --git a/drivers/infiniband/hw/hfi1/eprom.c b/drivers/infiniband/hw/hfi1/eprom.c new file mode 100644 index 000000000..fbe958107 --- /dev/null +++ b/drivers/infiniband/hw/hfi1/eprom.c @@ -0,0 +1,450 @@ +// SPDX-License-Identifier: GPL-2.0 or BSD-3-Clause +/* + * Copyright(c) 2015, 2016 Intel Corporation. + */ + +#include +#include "hfi.h" +#include "common.h" +#include "eprom.h" + +/* + * The EPROM is logically divided into three partitions: + * partition 0: the first 128K, visible from PCI ROM BAR + * partition 1: 4K config file (sector size) + * partition 2: the rest + */ +#define P0_SIZE (128 * 1024) +#define P1_SIZE (4 * 1024) +#define P1_START P0_SIZE +#define P2_START (P0_SIZE + P1_SIZE) + +/* controller page size, in bytes */ +#define EP_PAGE_SIZE 256 +#define EP_PAGE_MASK (EP_PAGE_SIZE - 1) +#define EP_PAGE_DWORDS (EP_PAGE_SIZE / sizeof(u32)) + +/* controller commands */ +#define CMD_SHIFT 24 +#define CMD_NOP (0) +#define CMD_READ_DATA(addr) ((0x03 << CMD_SHIFT) | addr) +#define CMD_RELEASE_POWERDOWN_NOID ((0xab << CMD_SHIFT)) + +/* controller interface speeds */ +#define EP_SPEED_FULL 0x2 /* full speed */ + +/* + * How long to wait for the EPROM to become available, in ms. + * The spec 32 Mb EPROM takes around 40s to erase then write. + * Double it for safety. + */ +#define EPROM_TIMEOUT 80000 /* ms */ + +/* + * Read a 256 byte (64 dword) EPROM page. + * All callers have verified the offset is at a page boundary. + */ +static void read_page(struct hfi1_devdata *dd, u32 offset, u32 *result) +{ + int i; + + write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_READ_DATA(offset)); + for (i = 0; i < EP_PAGE_DWORDS; i++) + result[i] = (u32)read_csr(dd, ASIC_EEP_DATA); + write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_NOP); /* close open page */ +} + +/* + * Read length bytes starting at offset from the start of the EPROM. + */ +static int read_length(struct hfi1_devdata *dd, u32 start, u32 len, void *dest) +{ + u32 buffer[EP_PAGE_DWORDS]; + u32 end; + u32 start_offset; + u32 read_start; + u32 bytes; + + if (len == 0) + return 0; + + end = start + len; + + /* + * Make sure the read range is not outside of the controller read + * command address range. Note that '>' is correct below - the end + * of the range is OK if it stops at the limit, but no higher. + */ + if (end > (1 << CMD_SHIFT)) + return -EINVAL; + + /* read the first partial page */ + start_offset = start & EP_PAGE_MASK; + if (start_offset) { + /* partial starting page */ + + /* align and read the page that contains the start */ + read_start = start & ~EP_PAGE_MASK; + read_page(dd, read_start, buffer); + + /* the rest of the page is available data */ + bytes = EP_PAGE_SIZE - start_offset; + + if (len <= bytes) { + /* end is within this page */ + memcpy(dest, (u8 *)buffer + start_offset, len); + return 0; + } + + memcpy(dest, (u8 *)buffer + start_offset, bytes); + + start += bytes; + len -= bytes; + dest += bytes; + } + /* start is now page aligned */ + + /* read whole pages */ + while (len >= EP_PAGE_SIZE) { + read_page(dd, start, buffer); + memcpy(dest, buffer, EP_PAGE_SIZE); + + start += EP_PAGE_SIZE; + len -= EP_PAGE_SIZE; + dest += EP_PAGE_SIZE; + } + + /* read the last partial page */ + if (len) { + read_page(dd, start, buffer); + memcpy(dest, buffer, len); + } + + return 0; +} + +/* + * Initialize the EPROM handler. + */ +int eprom_init(struct hfi1_devdata *dd) +{ + int ret = 0; + + /* only the discrete chip has an EPROM */ + if (dd->pcidev->device != PCI_DEVICE_ID_INTEL0) + return 0; + + /* + * It is OK if both HFIs reset the EPROM as long as they don't + * do it at the same time. + */ + ret = acquire_chip_resource(dd, CR_EPROM, EPROM_TIMEOUT); + if (ret) { + dd_dev_err(dd, + "%s: unable to acquire EPROM resource, no EPROM support\n", + __func__); + goto done_asic; + } + + /* reset EPROM to be sure it is in a good state */ + + /* set reset */ + write_csr(dd, ASIC_EEP_CTL_STAT, ASIC_EEP_CTL_STAT_EP_RESET_SMASK); + /* clear reset, set speed */ + write_csr(dd, ASIC_EEP_CTL_STAT, + EP_SPEED_FULL << ASIC_EEP_CTL_STAT_RATE_SPI_SHIFT); + + /* wake the device with command "release powerdown NoID" */ + write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_RELEASE_POWERDOWN_NOID); + + dd->eprom_available = true; + release_chip_resource(dd, CR_EPROM); +done_asic: + return ret; +} + +/* magic character sequence that begins an image */ +#define IMAGE_START_MAGIC "APO=" + +/* magic character sequence that might trail an image */ +#define IMAGE_TRAIL_MAGIC "egamiAPO" + +/* EPROM file types */ +#define HFI1_EFT_PLATFORM_CONFIG 2 + +/* segment size - 128 KiB */ +#define SEG_SIZE (128 * 1024) + +struct hfi1_eprom_footer { + u32 oprom_size; /* size of the oprom, in bytes */ + u16 num_table_entries; + u16 version; /* version of this footer */ + u32 magic; /* must be last */ +}; + +struct hfi1_eprom_table_entry { + u32 type; /* file type */ + u32 offset; /* file offset from start of EPROM */ + u32 size; /* file size, in bytes */ +}; + +/* + * Calculate the max number of table entries that will fit within a directory + * buffer of size 'dir_size'. + */ +#define MAX_TABLE_ENTRIES(dir_size) \ + (((dir_size) - sizeof(struct hfi1_eprom_footer)) / \ + sizeof(struct hfi1_eprom_table_entry)) + +#define DIRECTORY_SIZE(n) (sizeof(struct hfi1_eprom_footer) + \ + (sizeof(struct hfi1_eprom_table_entry) * (n))) + +#define MAGIC4(a, b, c, d) ((d) << 24 | (c) << 16 | (b) << 8 | (a)) +#define FOOTER_MAGIC MAGIC4('e', 'p', 'r', 'm') +#define FOOTER_VERSION 1 + +/* + * Read all of partition 1. The actual file is at the front. Adjust + * the returned size if a trailing image magic is found. + */ +static int read_partition_platform_config(struct hfi1_devdata *dd, void **data, + u32 *size) +{ + void *buffer; + void *p; + u32 length; + int ret; + + buffer = kmalloc(P1_SIZE, GFP_KERNEL); + if (!buffer) + return -ENOMEM; + + ret = read_length(dd, P1_START, P1_SIZE, buffer); + if (ret) { + kfree(buffer); + return ret; + } + + /* config partition is valid only if it starts with IMAGE_START_MAGIC */ + if (memcmp(buffer, IMAGE_START_MAGIC, strlen(IMAGE_START_MAGIC))) { + kfree(buffer); + return -ENOENT; + } + + /* scan for image magic that may trail the actual data */ + p = strnstr(buffer, IMAGE_TRAIL_MAGIC, P1_SIZE); + if (p) + length = p - buffer; + else + length = P1_SIZE; + + *data = buffer; + *size = length; + return 0; +} + +/* + * The segment magic has been checked. There is a footer and table of + * contents present. + * + * directory is a u32 aligned buffer of size EP_PAGE_SIZE. + */ +static int read_segment_platform_config(struct hfi1_devdata *dd, + void *directory, void **data, u32 *size) +{ + struct hfi1_eprom_footer *footer; + struct hfi1_eprom_table_entry *table; + struct hfi1_eprom_table_entry *entry; + void *buffer = NULL; + void *table_buffer = NULL; + int ret, i; + u32 directory_size; + u32 seg_base, seg_offset; + u32 bytes_available, ncopied, to_copy; + + /* the footer is at the end of the directory */ + footer = (struct hfi1_eprom_footer *) + (directory + EP_PAGE_SIZE - sizeof(*footer)); + + /* make sure the structure version is supported */ + if (footer->version != FOOTER_VERSION) + return -EINVAL; + + /* oprom size cannot be larger than a segment */ + if (footer->oprom_size >= SEG_SIZE) + return -EINVAL; + + /* the file table must fit in a segment with the oprom */ + if (footer->num_table_entries > + MAX_TABLE_ENTRIES(SEG_SIZE - footer->oprom_size)) + return -EINVAL; + + /* find the file table start, which precedes the footer */ + directory_size = DIRECTORY_SIZE(footer->num_table_entries); + if (directory_size <= EP_PAGE_SIZE) { + /* the file table fits into the directory buffer handed in */ + table = (struct hfi1_eprom_table_entry *) + (directory + EP_PAGE_SIZE - directory_size); + } else { + /* need to allocate and read more */ + table_buffer = kmalloc(directory_size, GFP_KERNEL); + if (!table_buffer) + return -ENOMEM; + ret = read_length(dd, SEG_SIZE - directory_size, + directory_size, table_buffer); + if (ret) + goto done; + table = table_buffer; + } + + /* look for the platform configuration file in the table */ + for (entry = NULL, i = 0; i < footer->num_table_entries; i++) { + if (table[i].type == HFI1_EFT_PLATFORM_CONFIG) { + entry = &table[i]; + break; + } + } + if (!entry) { + ret = -ENOENT; + goto done; + } + + /* + * Sanity check on the configuration file size - it should never + * be larger than 4 KiB. + */ + if (entry->size > (4 * 1024)) { + dd_dev_err(dd, "Bad configuration file size 0x%x\n", + entry->size); + ret = -EINVAL; + goto done; + } + + /* check for bogus offset and size that wrap when added together */ + if (entry->offset + entry->size < entry->offset) { + dd_dev_err(dd, + "Bad configuration file start + size 0x%x+0x%x\n", + entry->offset, entry->size); + ret = -EINVAL; + goto done; + } + + /* allocate the buffer to return */ + buffer = kmalloc(entry->size, GFP_KERNEL); + if (!buffer) { + ret = -ENOMEM; + goto done; + } + + /* + * Extract the file by looping over segments until it is fully read. + */ + seg_offset = entry->offset % SEG_SIZE; + seg_base = entry->offset - seg_offset; + ncopied = 0; + while (ncopied < entry->size) { + /* calculate data bytes available in this segment */ + + /* start with the bytes from the current offset to the end */ + bytes_available = SEG_SIZE - seg_offset; + /* subtract off footer and table from segment 0 */ + if (seg_base == 0) { + /* + * Sanity check: should not have a starting point + * at or within the directory. + */ + if (bytes_available <= directory_size) { + dd_dev_err(dd, + "Bad configuration file - offset 0x%x within footer+table\n", + entry->offset); + ret = -EINVAL; + goto done; + } + bytes_available -= directory_size; + } + + /* calculate bytes wanted */ + to_copy = entry->size - ncopied; + + /* max out at the available bytes in this segment */ + if (to_copy > bytes_available) + to_copy = bytes_available; + + /* + * Read from the EPROM. + * + * The sanity check for entry->offset is done in read_length(). + * The EPROM offset is validated against what the hardware + * addressing supports. In addition, if the offset is larger + * than the actual EPROM, it silently wraps. It will work + * fine, though the reader may not get what they expected + * from the EPROM. + */ + ret = read_length(dd, seg_base + seg_offset, to_copy, + buffer + ncopied); + if (ret) + goto done; + + ncopied += to_copy; + + /* set up for next segment */ + seg_offset = footer->oprom_size; + seg_base += SEG_SIZE; + } + + /* success */ + ret = 0; + *data = buffer; + *size = entry->size; + +done: + kfree(table_buffer); + if (ret) + kfree(buffer); + return ret; +} + +/* + * Read the platform configuration file from the EPROM. + * + * On success, an allocated buffer containing the data and its size are + * returned. It is up to the caller to free this buffer. + * + * Return value: + * 0 - success + * -ENXIO - no EPROM is available + * -EBUSY - not able to acquire access to the EPROM + * -ENOENT - no recognizable file written + * -ENOMEM - buffer could not be allocated + * -EINVAL - invalid EPROM contentents found + */ +int eprom_read_platform_config(struct hfi1_devdata *dd, void **data, u32 *size) +{ + u32 directory[EP_PAGE_DWORDS]; /* aligned buffer */ + int ret; + + if (!dd->eprom_available) + return -ENXIO; + + ret = acquire_chip_resource(dd, CR_EPROM, EPROM_TIMEOUT); + if (ret) + return -EBUSY; + + /* read the last page of the segment for the EPROM format magic */ + ret = read_length(dd, SEG_SIZE - EP_PAGE_SIZE, EP_PAGE_SIZE, directory); + if (ret) + goto done; + + /* last dword of the segment contains a magic value */ + if (directory[EP_PAGE_DWORDS - 1] == FOOTER_MAGIC) { + /* segment format */ + ret = read_segment_platform_config(dd, directory, data, size); + } else { + /* partition format */ + ret = read_partition_platform_config(dd, data, size); + } + +done: + release_chip_resource(dd, CR_EPROM); + return ret; +} -- cgit v1.2.3