From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/net/ethernet/broadcom/bcm4908_enet.h | 96 ++++++++++++++++++++++++++++ 1 file changed, 96 insertions(+) create mode 100644 drivers/net/ethernet/broadcom/bcm4908_enet.h (limited to 'drivers/net/ethernet/broadcom/bcm4908_enet.h') diff --git a/drivers/net/ethernet/broadcom/bcm4908_enet.h b/drivers/net/ethernet/broadcom/bcm4908_enet.h new file mode 100644 index 000000000..8a3ede2da --- /dev/null +++ b/drivers/net/ethernet/broadcom/bcm4908_enet.h @@ -0,0 +1,96 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +#ifndef __BCM4908_ENET_H +#define __BCM4908_ENET_H + +#define ENET_CONTROL 0x000 +#define ENET_MIB_CTRL 0x004 +#define ENET_MIB_CTRL_CLR_MIB 0x00000001 +#define ENET_RX_ERR_MASK 0x008 +#define ENET_MIB_MAX_PKT_SIZE 0x00C +#define ENET_MIB_MAX_PKT_SIZE_VAL 0x00003fff +#define ENET_DIAG_OUT 0x01c +#define ENET_ENABLE_DROP_PKT 0x020 +#define ENET_IRQ_ENABLE 0x024 +#define ENET_IRQ_ENABLE_OVFL 0x00000001 +#define ENET_GMAC_STATUS 0x028 +#define ENET_GMAC_STATUS_ETH_SPEED_MASK 0x00000003 +#define ENET_GMAC_STATUS_ETH_SPEED_10 0x00000000 +#define ENET_GMAC_STATUS_ETH_SPEED_100 0x00000001 +#define ENET_GMAC_STATUS_ETH_SPEED_1000 0x00000002 +#define ENET_GMAC_STATUS_HD 0x00000004 +#define ENET_GMAC_STATUS_AUTO_CFG_EN 0x00000008 +#define ENET_GMAC_STATUS_LINK_UP 0x00000010 +#define ENET_IRQ_STATUS 0x02c +#define ENET_IRQ_STATUS_OVFL 0x00000001 +#define ENET_OVERFLOW_COUNTER 0x030 +#define ENET_FLUSH 0x034 +#define ENET_FLUSH_RXFIFO_FLUSH 0x00000001 +#define ENET_FLUSH_TXFIFO_FLUSH 0x00000002 +#define ENET_RSV_SELECT 0x038 +#define ENET_BP_FORCE 0x03c +#define ENET_BP_FORCE_FORCE 0x00000001 +#define ENET_DMA_RX_OK_TO_SEND_COUNT 0x040 +#define ENET_DMA_RX_OK_TO_SEND_COUNT_VAL 0x0000000f +#define ENET_TX_CRC_CTRL 0x044 +#define ENET_MIB 0x200 +#define ENET_UNIMAC 0x400 +#define ENET_DMA 0x800 +#define ENET_DMA_CONTROLLER_CFG 0x800 +#define ENET_DMA_CTRL_CFG_MASTER_EN 0x00000001 +#define ENET_DMA_CTRL_CFG_FLOWC_CH1_EN 0x00000002 +#define ENET_DMA_CTRL_CFG_FLOWC_CH3_EN 0x00000004 +#define ENET_DMA_FLOWCTL_CH1_THRESH_LO 0x804 +#define ENET_DMA_FLOWCTL_CH1_THRESH_HI 0x808 +#define ENET_DMA_FLOWCTL_CH1_ALLOC 0x80c +#define ENET_DMA_FLOWCTL_CH1_ALLOC_FORCE 0x80000000 +#define ENET_DMA_FLOWCTL_CH3_THRESH_LO 0x810 +#define ENET_DMA_FLOWCTL_CH3_THRESH_HI 0x814 +#define ENET_DMA_FLOWCTL_CH3_ALLOC 0x818 +#define ENET_DMA_FLOWCTL_CH5_THRESH_LO 0x81C +#define ENET_DMA_FLOWCTL_CH5_THRESH_HI 0x820 +#define ENET_DMA_FLOWCTL_CH5_ALLOC 0x824 +#define ENET_DMA_FLOWCTL_CH7_THRESH_LO 0x828 +#define ENET_DMA_FLOWCTL_CH7_THRESH_HI 0x82C +#define ENET_DMA_FLOWCTL_CH7_ALLOC 0x830 +#define ENET_DMA_CTRL_CHANNEL_RESET 0x834 +#define ENET_DMA_CTRL_CHANNEL_DEBUG 0x838 +#define ENET_DMA_CTRL_GLOBAL_INTERRUPT_STATUS 0x840 +#define ENET_DMA_CTRL_GLOBAL_INTERRUPT_MASK 0x844 +#define ENET_DMA_CH0_CFG 0xa00 /* RX */ +#define ENET_DMA_CH1_CFG 0xa10 /* TX */ +#define ENET_DMA_CH0_STATE_RAM 0xc00 /* RX */ +#define ENET_DMA_CH1_STATE_RAM 0xc10 /* TX */ + +#define ENET_DMA_CH_CFG 0x00 /* assorted configuration */ +#define ENET_DMA_CH_CFG_ENABLE 0x00000001 /* set to enable channel */ +#define ENET_DMA_CH_CFG_PKT_HALT 0x00000002 /* idle after an EOP flag is detected */ +#define ENET_DMA_CH_CFG_BURST_HALT 0x00000004 /* idle after finish current memory burst */ +#define ENET_DMA_CH_CFG_INT_STAT 0x04 /* interrupts control and status */ +#define ENET_DMA_CH_CFG_INT_MASK 0x08 /* interrupts mask */ +#define ENET_DMA_CH_CFG_INT_BUFF_DONE 0x00000001 /* buffer done */ +#define ENET_DMA_CH_CFG_INT_DONE 0x00000002 /* packet xfer complete */ +#define ENET_DMA_CH_CFG_INT_NO_DESC 0x00000004 /* no valid descriptors */ +#define ENET_DMA_CH_CFG_INT_RX_ERROR 0x00000008 /* rxdma detect client protocol error */ +#define ENET_DMA_CH_CFG_MAX_BURST 0x0c /* max burst length permitted */ +#define ENET_DMA_CH_CFG_MAX_BURST_DESCSIZE_SEL 0x00040000 /* DMA Descriptor Size Selection */ +#define ENET_DMA_CH_CFG_SIZE 0x10 + +#define ENET_DMA_CH_STATE_RAM_BASE_DESC_PTR 0x00 /* descriptor ring start address */ +#define ENET_DMA_CH_STATE_RAM_STATE_DATA 0x04 /* state/bytes done/ring offset */ +#define ENET_DMA_CH_STATE_RAM_DESC_LEN_STATUS 0x08 /* buffer descriptor status and len */ +#define ENET_DMA_CH_STATE_RAM_DESC_BASE_BUFPTR 0x0c /* buffer descrpitor current processing */ +#define ENET_DMA_CH_STATE_RAM_SIZE 0x10 + +#define DMA_CTL_STATUS_APPEND_CRC 0x00000100 +#define DMA_CTL_STATUS_APPEND_BRCM_TAG 0x00000200 +#define DMA_CTL_STATUS_PRIO 0x00000C00 /* Prio for Tx */ +#define DMA_CTL_STATUS_WRAP 0x00001000 /* */ +#define DMA_CTL_STATUS_SOP 0x00002000 /* first buffer in packet */ +#define DMA_CTL_STATUS_EOP 0x00004000 /* last buffer in packet */ +#define DMA_CTL_STATUS_OWN 0x00008000 /* cleared by DMA, set by SW */ +#define DMA_CTL_LEN_DESC_BUFLENGTH 0x0fff0000 +#define DMA_CTL_LEN_DESC_BUFLENGTH_SHIFT 16 +#define DMA_CTL_LEN_DESC_MULTICAST 0x40000000 +#define DMA_CTL_LEN_DESC_USEFPM 0x80000000 + +#endif -- cgit v1.2.3