From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/net/ethernet/sis/sis900.c | 2586 +++++++++++++++++++++++++++++++++++++ 1 file changed, 2586 insertions(+) create mode 100644 drivers/net/ethernet/sis/sis900.c (limited to 'drivers/net/ethernet/sis/sis900.c') diff --git a/drivers/net/ethernet/sis/sis900.c b/drivers/net/ethernet/sis/sis900.c new file mode 100644 index 000000000..cb7fec226 --- /dev/null +++ b/drivers/net/ethernet/sis/sis900.c @@ -0,0 +1,2586 @@ +/* sis900.c: A SiS 900/7016 PCI Fast Ethernet driver for Linux. + Copyright 1999 Silicon Integrated System Corporation + Revision: 1.08.10 Apr. 2 2006 + + Modified from the driver which is originally written by Donald Becker. + + This software may be used and distributed according to the terms + of the GNU General Public License (GPL), incorporated herein by reference. + Drivers based on this skeleton fall under the GPL and must retain + the authorship (implicit copyright) notice. + + References: + SiS 7016 Fast Ethernet PCI Bus 10/100 Mbps LAN Controller with OnNow Support, + preliminary Rev. 1.0 Jan. 14, 1998 + SiS 900 Fast Ethernet PCI Bus 10/100 Mbps LAN Single Chip with OnNow Support, + preliminary Rev. 1.0 Nov. 10, 1998 + SiS 7014 Single Chip 100BASE-TX/10BASE-T Physical Layer Solution, + preliminary Rev. 1.0 Jan. 18, 1998 + + Rev 1.08.10 Apr. 2 2006 Daniele Venzano add vlan (jumbo packets) support + Rev 1.08.09 Sep. 19 2005 Daniele Venzano add Wake on LAN support + Rev 1.08.08 Jan. 22 2005 Daniele Venzano use netif_msg for debugging messages + Rev 1.08.07 Nov. 2 2003 Daniele Venzano add suspend/resume support + Rev 1.08.06 Sep. 24 2002 Mufasa Yang bug fix for Tx timeout & add SiS963 support + Rev 1.08.05 Jun. 6 2002 Mufasa Yang bug fix for read_eeprom & Tx descriptor over-boundary + Rev 1.08.04 Apr. 25 2002 Mufasa Yang added SiS962 support + Rev 1.08.03 Feb. 1 2002 Matt Domsch update to use library crc32 function + Rev 1.08.02 Nov. 30 2001 Hui-Fen Hsu workaround for EDB & bug fix for dhcp problem + Rev 1.08.01 Aug. 25 2001 Hui-Fen Hsu update for 630ET & workaround for ICS1893 PHY + Rev 1.08.00 Jun. 11 2001 Hui-Fen Hsu workaround for RTL8201 PHY and some bug fix + Rev 1.07.11 Apr. 2 2001 Hui-Fen Hsu updates PCI drivers to use the new pci_set_dma_mask for kernel 2.4.3 + Rev 1.07.10 Mar. 1 2001 Hui-Fen Hsu some bug fix & 635M/B support + Rev 1.07.09 Feb. 9 2001 Dave Jones PCI enable cleanup + Rev 1.07.08 Jan. 8 2001 Lei-Chun Chang added RTL8201 PHY support + Rev 1.07.07 Nov. 29 2000 Lei-Chun Chang added kernel-doc extractable documentation and 630 workaround fix + Rev 1.07.06 Nov. 7 2000 Jeff Garzik some bug fix and cleaning + Rev 1.07.05 Nov. 6 2000 metapirat contribute media type select by ifconfig + Rev 1.07.04 Sep. 6 2000 Lei-Chun Chang added ICS1893 PHY support + Rev 1.07.03 Aug. 24 2000 Lei-Chun Chang (lcchang@sis.com.tw) modified 630E equalizer workaround rule + Rev 1.07.01 Aug. 08 2000 Ollie Lho minor update for SiS 630E and SiS 630E A1 + Rev 1.07 Mar. 07 2000 Ollie Lho bug fix in Rx buffer ring + Rev 1.06.04 Feb. 11 2000 Jeff Garzik softnet and init for kernel 2.4 + Rev 1.06.03 Dec. 23 1999 Ollie Lho Third release + Rev 1.06.02 Nov. 23 1999 Ollie Lho bug in mac probing fixed + Rev 1.06.01 Nov. 16 1999 Ollie Lho CRC calculation provide by Joseph Zbiciak (im14u2c@primenet.com) + Rev 1.06 Nov. 4 1999 Ollie Lho (ollie@sis.com.tw) Second release + Rev 1.05.05 Oct. 29 1999 Ollie Lho (ollie@sis.com.tw) Single buffer Tx/Rx + Chin-Shan Li (lcs@sis.com.tw) Added AMD Am79c901 HomePNA PHY support + Rev 1.05 Aug. 7 1999 Jim Huang (cmhuang@sis.com.tw) Initial release +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include /* Processor type for cache alignment. */ +#include +#include +#include /* User space memory access functions */ + +#include "sis900.h" + +#define SIS900_MODULE_NAME "sis900" +#define SIS900_DRV_VERSION "v1.08.10 Apr. 2 2006" + +static const char version[] = + KERN_INFO "sis900.c: " SIS900_DRV_VERSION "\n"; + +static int max_interrupt_work = 40; +static int multicast_filter_limit = 128; + +static int sis900_debug = -1; /* Use SIS900_DEF_MSG as value */ + +#define SIS900_DEF_MSG \ + (NETIF_MSG_DRV | \ + NETIF_MSG_LINK | \ + NETIF_MSG_RX_ERR | \ + NETIF_MSG_TX_ERR) + +/* Time in jiffies before concluding the transmitter is hung. */ +#define TX_TIMEOUT (4*HZ) + +enum { + SIS_900 = 0, + SIS_7016 +}; +static const char * card_names[] = { + "SiS 900 PCI Fast Ethernet", + "SiS 7016 PCI Fast Ethernet" +}; + +static const struct pci_device_id sis900_pci_tbl[] = { + {PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_900, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, SIS_900}, + {PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_7016, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, SIS_7016}, + {0,} +}; +MODULE_DEVICE_TABLE (pci, sis900_pci_tbl); + +static void sis900_read_mode(struct net_device *net_dev, int *speed, int *duplex); + +static const struct mii_chip_info { + const char * name; + u16 phy_id0; + u16 phy_id1; + u8 phy_types; +#define HOME 0x0001 +#define LAN 0x0002 +#define MIX 0x0003 +#define UNKNOWN 0x0 +} mii_chip_table[] = { + { "SiS 900 Internal MII PHY", 0x001d, 0x8000, LAN }, + { "SiS 7014 Physical Layer Solution", 0x0016, 0xf830, LAN }, + { "SiS 900 on Foxconn 661 7MI", 0x0143, 0xBC70, LAN }, + { "Altimata AC101LF PHY", 0x0022, 0x5520, LAN }, + { "ADM 7001 LAN PHY", 0x002e, 0xcc60, LAN }, + { "AMD 79C901 10BASE-T PHY", 0x0000, 0x6B70, LAN }, + { "AMD 79C901 HomePNA PHY", 0x0000, 0x6B90, HOME}, + { "ICS LAN PHY", 0x0015, 0xF440, LAN }, + { "ICS LAN PHY", 0x0143, 0xBC70, LAN }, + { "NS 83851 PHY", 0x2000, 0x5C20, MIX }, + { "NS 83847 PHY", 0x2000, 0x5C30, MIX }, + { "Realtek RTL8201 PHY", 0x0000, 0x8200, LAN }, + { "VIA 6103 PHY", 0x0101, 0x8f20, LAN }, + {NULL,}, +}; + +struct mii_phy { + struct mii_phy * next; + int phy_addr; + u16 phy_id0; + u16 phy_id1; + u16 status; + u8 phy_types; +}; + +typedef struct _BufferDesc { + u32 link; + u32 cmdsts; + u32 bufptr; +} BufferDesc; + +struct sis900_private { + struct pci_dev * pci_dev; + + spinlock_t lock; + + struct mii_phy * mii; + struct mii_phy * first_mii; /* record the first mii structure */ + unsigned int cur_phy; + struct mii_if_info mii_info; + + void __iomem *ioaddr; + + struct timer_list timer; /* Link status detection timer. */ + u8 autong_complete; /* 1: auto-negotiate complete */ + + u32 msg_enable; + + unsigned int cur_rx, dirty_rx; /* producer/consumer pointers for Tx/Rx ring */ + unsigned int cur_tx, dirty_tx; + + /* The saved address of a sent/receive-in-place packet buffer */ + struct sk_buff *tx_skbuff[NUM_TX_DESC]; + struct sk_buff *rx_skbuff[NUM_RX_DESC]; + BufferDesc *tx_ring; + BufferDesc *rx_ring; + + dma_addr_t tx_ring_dma; + dma_addr_t rx_ring_dma; + + unsigned int tx_full; /* The Tx queue is full. */ + u8 host_bridge_rev; + u8 chipset_rev; + /* EEPROM data */ + int eeprom_size; +}; + +MODULE_AUTHOR("Jim Huang , Ollie Lho "); +MODULE_DESCRIPTION("SiS 900 PCI Fast Ethernet driver"); +MODULE_LICENSE("GPL"); + +module_param(multicast_filter_limit, int, 0444); +module_param(max_interrupt_work, int, 0444); +module_param(sis900_debug, int, 0444); +MODULE_PARM_DESC(multicast_filter_limit, "SiS 900/7016 maximum number of filtered multicast addresses"); +MODULE_PARM_DESC(max_interrupt_work, "SiS 900/7016 maximum events handled per interrupt"); +MODULE_PARM_DESC(sis900_debug, "SiS 900/7016 bitmapped debugging message level"); + +#define sw32(reg, val) iowrite32(val, ioaddr + (reg)) +#define sw8(reg, val) iowrite8(val, ioaddr + (reg)) +#define sr32(reg) ioread32(ioaddr + (reg)) +#define sr16(reg) ioread16(ioaddr + (reg)) + +#ifdef CONFIG_NET_POLL_CONTROLLER +static void sis900_poll(struct net_device *dev); +#endif +static int sis900_open(struct net_device *net_dev); +static int sis900_mii_probe (struct net_device * net_dev); +static void sis900_init_rxfilter (struct net_device * net_dev); +static u16 read_eeprom(void __iomem *ioaddr, int location); +static int mdio_read(struct net_device *net_dev, int phy_id, int location); +static void mdio_write(struct net_device *net_dev, int phy_id, int location, int val); +static void sis900_timer(struct timer_list *t); +static void sis900_check_mode (struct net_device *net_dev, struct mii_phy *mii_phy); +static void sis900_tx_timeout(struct net_device *net_dev, unsigned int txqueue); +static void sis900_init_tx_ring(struct net_device *net_dev); +static void sis900_init_rx_ring(struct net_device *net_dev); +static netdev_tx_t sis900_start_xmit(struct sk_buff *skb, + struct net_device *net_dev); +static int sis900_rx(struct net_device *net_dev); +static void sis900_finish_xmit (struct net_device *net_dev); +static irqreturn_t sis900_interrupt(int irq, void *dev_instance); +static int sis900_close(struct net_device *net_dev); +static int mii_ioctl(struct net_device *net_dev, struct ifreq *rq, int cmd); +static u16 sis900_mcast_bitnr(u8 *addr, u8 revision); +static void set_rx_mode(struct net_device *net_dev); +static void sis900_reset(struct net_device *net_dev); +static void sis630_set_eq(struct net_device *net_dev, u8 revision); +static int sis900_set_config(struct net_device *dev, struct ifmap *map); +static u16 sis900_default_phy(struct net_device * net_dev); +static void sis900_set_capability( struct net_device *net_dev ,struct mii_phy *phy); +static u16 sis900_reset_phy(struct net_device *net_dev, int phy_addr); +static void sis900_auto_negotiate(struct net_device *net_dev, int phy_addr); +static void sis900_set_mode(struct sis900_private *, int speed, int duplex); +static const struct ethtool_ops sis900_ethtool_ops; + +/** + * sis900_get_mac_addr - Get MAC address for stand alone SiS900 model + * @pci_dev: the sis900 pci device + * @net_dev: the net device to get address for + * + * Older SiS900 and friends, use EEPROM to store MAC address. + * MAC address is read from read_eeprom() into @net_dev->dev_addr. + */ + +static int sis900_get_mac_addr(struct pci_dev *pci_dev, + struct net_device *net_dev) +{ + struct sis900_private *sis_priv = netdev_priv(net_dev); + void __iomem *ioaddr = sis_priv->ioaddr; + u16 addr[ETH_ALEN / 2]; + u16 signature; + int i; + + /* check to see if we have sane EEPROM */ + signature = (u16) read_eeprom(ioaddr, EEPROMSignature); + if (signature == 0xffff || signature == 0x0000) { + printk (KERN_WARNING "%s: Error EEPROM read %x\n", + pci_name(pci_dev), signature); + return 0; + } + + /* get MAC address from EEPROM */ + for (i = 0; i < 3; i++) + addr[i] = read_eeprom(ioaddr, i+EEPROMMACAddr); + eth_hw_addr_set(net_dev, (u8 *)addr); + + return 1; +} + +/** + * sis630e_get_mac_addr - Get MAC address for SiS630E model + * @pci_dev: the sis900 pci device + * @net_dev: the net device to get address for + * + * SiS630E model, use APC CMOS RAM to store MAC address. + * APC CMOS RAM is accessed through ISA bridge. + * MAC address is read into @net_dev->dev_addr. + */ + +static int sis630e_get_mac_addr(struct pci_dev *pci_dev, + struct net_device *net_dev) +{ + struct pci_dev *isa_bridge = NULL; + u8 addr[ETH_ALEN]; + u8 reg; + int i; + + isa_bridge = pci_get_device(PCI_VENDOR_ID_SI, 0x0008, isa_bridge); + if (!isa_bridge) + isa_bridge = pci_get_device(PCI_VENDOR_ID_SI, 0x0018, isa_bridge); + if (!isa_bridge) { + printk(KERN_WARNING "%s: Can not find ISA bridge\n", + pci_name(pci_dev)); + return 0; + } + pci_read_config_byte(isa_bridge, 0x48, ®); + pci_write_config_byte(isa_bridge, 0x48, reg | 0x40); + + for (i = 0; i < 6; i++) { + outb(0x09 + i, 0x70); + addr[i] = inb(0x71); + } + eth_hw_addr_set(net_dev, addr); + + pci_write_config_byte(isa_bridge, 0x48, reg & ~0x40); + pci_dev_put(isa_bridge); + + return 1; +} + + +/** + * sis635_get_mac_addr - Get MAC address for SIS635 model + * @pci_dev: the sis900 pci device + * @net_dev: the net device to get address for + * + * SiS635 model, set MAC Reload Bit to load Mac address from APC + * to rfdr. rfdr is accessed through rfcr. MAC address is read into + * @net_dev->dev_addr. + */ + +static int sis635_get_mac_addr(struct pci_dev *pci_dev, + struct net_device *net_dev) +{ + struct sis900_private *sis_priv = netdev_priv(net_dev); + void __iomem *ioaddr = sis_priv->ioaddr; + u16 addr[ETH_ALEN / 2]; + u32 rfcrSave; + u32 i; + + rfcrSave = sr32(rfcr); + + sw32(cr, rfcrSave | RELOAD); + sw32(cr, 0); + + /* disable packet filtering before setting filter */ + sw32(rfcr, rfcrSave & ~RFEN); + + /* load MAC addr to filter data register */ + for (i = 0 ; i < 3 ; i++) { + sw32(rfcr, (i << RFADDR_shift)); + addr[i] = sr16(rfdr); + } + eth_hw_addr_set(net_dev, (u8 *)addr); + + /* enable packet filtering */ + sw32(rfcr, rfcrSave | RFEN); + + return 1; +} + +/** + * sis96x_get_mac_addr - Get MAC address for SiS962 or SiS963 model + * @pci_dev: the sis900 pci device + * @net_dev: the net device to get address for + * + * SiS962 or SiS963 model, use EEPROM to store MAC address. And EEPROM + * is shared by + * LAN and 1394. When accessing EEPROM, send EEREQ signal to hardware first + * and wait for EEGNT. If EEGNT is ON, EEPROM is permitted to be accessed + * by LAN, otherwise it is not. After MAC address is read from EEPROM, send + * EEDONE signal to refuse EEPROM access by LAN. + * The EEPROM map of SiS962 or SiS963 is different to SiS900. + * The signature field in SiS962 or SiS963 spec is meaningless. + * MAC address is read into @net_dev->dev_addr. + */ + +static int sis96x_get_mac_addr(struct pci_dev *pci_dev, + struct net_device *net_dev) +{ + struct sis900_private *sis_priv = netdev_priv(net_dev); + void __iomem *ioaddr = sis_priv->ioaddr; + u16 addr[ETH_ALEN / 2]; + int wait, rc = 0; + + sw32(mear, EEREQ); + for (wait = 0; wait < 2000; wait++) { + if (sr32(mear) & EEGNT) { + int i; + + /* get MAC address from EEPROM */ + for (i = 0; i < 3; i++) + addr[i] = read_eeprom(ioaddr, i + EEPROMMACAddr); + eth_hw_addr_set(net_dev, (u8 *)addr); + + rc = 1; + break; + } + udelay(1); + } + sw32(mear, EEDONE); + return rc; +} + +static const struct net_device_ops sis900_netdev_ops = { + .ndo_open = sis900_open, + .ndo_stop = sis900_close, + .ndo_start_xmit = sis900_start_xmit, + .ndo_set_config = sis900_set_config, + .ndo_set_rx_mode = set_rx_mode, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = eth_mac_addr, + .ndo_eth_ioctl = mii_ioctl, + .ndo_tx_timeout = sis900_tx_timeout, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = sis900_poll, +#endif +}; + +/** + * sis900_probe - Probe for sis900 device + * @pci_dev: the sis900 pci device + * @pci_id: the pci device ID + * + * Check and probe sis900 net device for @pci_dev. + * Get mac address according to the chip revision, + * and assign SiS900-specific entries in the device structure. + * ie: sis900_open(), sis900_start_xmit(), sis900_close(), etc. + */ + +static int sis900_probe(struct pci_dev *pci_dev, + const struct pci_device_id *pci_id) +{ + struct sis900_private *sis_priv; + struct net_device *net_dev; + struct pci_dev *dev; + dma_addr_t ring_dma; + void *ring_space; + void __iomem *ioaddr; + int i, ret; + const char *card_name = card_names[pci_id->driver_data]; + const char *dev_name = pci_name(pci_dev); + +/* when built into the kernel, we only print version if device is found */ +#ifndef MODULE + static int printed_version; + if (!printed_version++) + printk(version); +#endif + + /* setup various bits in PCI command register */ + ret = pcim_enable_device(pci_dev); + if(ret) return ret; + + i = dma_set_mask(&pci_dev->dev, DMA_BIT_MASK(32)); + if(i){ + printk(KERN_ERR "sis900.c: architecture does not support " + "32bit PCI busmaster DMA\n"); + return i; + } + + pci_set_master(pci_dev); + + net_dev = alloc_etherdev(sizeof(struct sis900_private)); + if (!net_dev) + return -ENOMEM; + SET_NETDEV_DEV(net_dev, &pci_dev->dev); + + /* We do a request_region() to register /proc/ioports info. */ + ret = pci_request_regions(pci_dev, "sis900"); + if (ret) + goto err_out; + + /* IO region. */ + ioaddr = pci_iomap(pci_dev, 0, 0); + if (!ioaddr) { + ret = -ENOMEM; + goto err_out; + } + + sis_priv = netdev_priv(net_dev); + sis_priv->ioaddr = ioaddr; + sis_priv->pci_dev = pci_dev; + spin_lock_init(&sis_priv->lock); + + sis_priv->eeprom_size = 24; + + pci_set_drvdata(pci_dev, net_dev); + + ring_space = dma_alloc_coherent(&pci_dev->dev, TX_TOTAL_SIZE, + &ring_dma, GFP_KERNEL); + if (!ring_space) { + ret = -ENOMEM; + goto err_out_unmap; + } + sis_priv->tx_ring = ring_space; + sis_priv->tx_ring_dma = ring_dma; + + ring_space = dma_alloc_coherent(&pci_dev->dev, RX_TOTAL_SIZE, + &ring_dma, GFP_KERNEL); + if (!ring_space) { + ret = -ENOMEM; + goto err_unmap_tx; + } + sis_priv->rx_ring = ring_space; + sis_priv->rx_ring_dma = ring_dma; + + /* The SiS900-specific entries in the device structure. */ + net_dev->netdev_ops = &sis900_netdev_ops; + net_dev->watchdog_timeo = TX_TIMEOUT; + net_dev->ethtool_ops = &sis900_ethtool_ops; + + if (sis900_debug > 0) + sis_priv->msg_enable = sis900_debug; + else + sis_priv->msg_enable = SIS900_DEF_MSG; + + sis_priv->mii_info.dev = net_dev; + sis_priv->mii_info.mdio_read = mdio_read; + sis_priv->mii_info.mdio_write = mdio_write; + sis_priv->mii_info.phy_id_mask = 0x1f; + sis_priv->mii_info.reg_num_mask = 0x1f; + + /* Get Mac address according to the chip revision */ + sis_priv->chipset_rev = pci_dev->revision; + if(netif_msg_probe(sis_priv)) + printk(KERN_DEBUG "%s: detected revision %2.2x, " + "trying to get MAC address...\n", + dev_name, sis_priv->chipset_rev); + + ret = 0; + if (sis_priv->chipset_rev == SIS630E_900_REV) + ret = sis630e_get_mac_addr(pci_dev, net_dev); + else if ((sis_priv->chipset_rev > 0x81) && (sis_priv->chipset_rev <= 0x90) ) + ret = sis635_get_mac_addr(pci_dev, net_dev); + else if (sis_priv->chipset_rev == SIS96x_900_REV) + ret = sis96x_get_mac_addr(pci_dev, net_dev); + else + ret = sis900_get_mac_addr(pci_dev, net_dev); + + if (!ret || !is_valid_ether_addr(net_dev->dev_addr)) { + eth_hw_addr_random(net_dev); + printk(KERN_WARNING "%s: Unreadable or invalid MAC address," + "using random generated one\n", dev_name); + } + + /* 630ET : set the mii access mode as software-mode */ + if (sis_priv->chipset_rev == SIS630ET_900_REV) + sw32(cr, ACCESSMODE | sr32(cr)); + + /* probe for mii transceiver */ + if (sis900_mii_probe(net_dev) == 0) { + printk(KERN_WARNING "%s: Error probing MII device.\n", + dev_name); + ret = -ENODEV; + goto err_unmap_rx; + } + + /* save our host bridge revision */ + dev = pci_get_device(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_630, NULL); + if (dev) { + sis_priv->host_bridge_rev = dev->revision; + pci_dev_put(dev); + } + + ret = register_netdev(net_dev); + if (ret) + goto err_unmap_rx; + + /* print some information about our NIC */ + printk(KERN_INFO "%s: %s at 0x%p, IRQ %d, %pM\n", + net_dev->name, card_name, ioaddr, pci_dev->irq, + net_dev->dev_addr); + + /* Detect Wake on Lan support */ + ret = (sr32(CFGPMC) & PMESP) >> 27; + if (netif_msg_probe(sis_priv) && (ret & PME_D3C) == 0) + printk(KERN_INFO "%s: Wake on LAN only available from suspend to RAM.", net_dev->name); + + return 0; + +err_unmap_rx: + dma_free_coherent(&pci_dev->dev, RX_TOTAL_SIZE, sis_priv->rx_ring, + sis_priv->rx_ring_dma); +err_unmap_tx: + dma_free_coherent(&pci_dev->dev, TX_TOTAL_SIZE, sis_priv->tx_ring, + sis_priv->tx_ring_dma); +err_out_unmap: + pci_iounmap(pci_dev, ioaddr); + err_out: + free_netdev(net_dev); + return ret; +} + +/** + * sis900_mii_probe - Probe MII PHY for sis900 + * @net_dev: the net device to probe for + * + * Search for total of 32 possible mii phy addresses. + * Identify and set current phy if found one, + * return error if it failed to found. + */ + +static int sis900_mii_probe(struct net_device *net_dev) +{ + struct sis900_private *sis_priv = netdev_priv(net_dev); + const char *dev_name = pci_name(sis_priv->pci_dev); + u16 poll_bit = MII_STAT_LINK, status = 0; + unsigned long timeout = jiffies + 5 * HZ; + int phy_addr; + + sis_priv->mii = NULL; + + /* search for total of 32 possible mii phy addresses */ + for (phy_addr = 0; phy_addr < 32; phy_addr++) { + struct mii_phy * mii_phy = NULL; + u16 mii_status; + int i; + + mii_phy = NULL; + for(i = 0; i < 2; i++) + mii_status = mdio_read(net_dev, phy_addr, MII_STATUS); + + if (mii_status == 0xffff || mii_status == 0x0000) { + if (netif_msg_probe(sis_priv)) + printk(KERN_DEBUG "%s: MII at address %d" + " not accessible\n", + dev_name, phy_addr); + continue; + } + + if ((mii_phy = kmalloc(sizeof(struct mii_phy), GFP_KERNEL)) == NULL) { + mii_phy = sis_priv->first_mii; + while (mii_phy) { + struct mii_phy *phy; + phy = mii_phy; + mii_phy = mii_phy->next; + kfree(phy); + } + return 0; + } + + mii_phy->phy_id0 = mdio_read(net_dev, phy_addr, MII_PHY_ID0); + mii_phy->phy_id1 = mdio_read(net_dev, phy_addr, MII_PHY_ID1); + mii_phy->phy_addr = phy_addr; + mii_phy->status = mii_status; + mii_phy->next = sis_priv->mii; + sis_priv->mii = mii_phy; + sis_priv->first_mii = mii_phy; + + for (i = 0; mii_chip_table[i].phy_id1; i++) + if ((mii_phy->phy_id0 == mii_chip_table[i].phy_id0 ) && + ((mii_phy->phy_id1 & 0xFFF0) == mii_chip_table[i].phy_id1)){ + mii_phy->phy_types = mii_chip_table[i].phy_types; + if (mii_chip_table[i].phy_types == MIX) + mii_phy->phy_types = + (mii_status & (MII_STAT_CAN_TX_FDX | MII_STAT_CAN_TX)) ? LAN : HOME; + printk(KERN_INFO "%s: %s transceiver found " + "at address %d.\n", + dev_name, + mii_chip_table[i].name, + phy_addr); + break; + } + + if( !mii_chip_table[i].phy_id1 ) { + printk(KERN_INFO "%s: Unknown PHY transceiver found at address %d.\n", + dev_name, phy_addr); + mii_phy->phy_types = UNKNOWN; + } + } + + if (sis_priv->mii == NULL) { + printk(KERN_INFO "%s: No MII transceivers found!\n", dev_name); + return 0; + } + + /* select default PHY for mac */ + sis_priv->mii = NULL; + sis900_default_phy( net_dev ); + + /* Reset phy if default phy is internal sis900 */ + if ((sis_priv->mii->phy_id0 == 0x001D) && + ((sis_priv->mii->phy_id1&0xFFF0) == 0x8000)) + status = sis900_reset_phy(net_dev, sis_priv->cur_phy); + + /* workaround for ICS1893 PHY */ + if ((sis_priv->mii->phy_id0 == 0x0015) && + ((sis_priv->mii->phy_id1&0xFFF0) == 0xF440)) + mdio_write(net_dev, sis_priv->cur_phy, 0x0018, 0xD200); + + if(status & MII_STAT_LINK){ + while (poll_bit) { + yield(); + + poll_bit ^= (mdio_read(net_dev, sis_priv->cur_phy, MII_STATUS) & poll_bit); + if (time_after_eq(jiffies, timeout)) { + printk(KERN_WARNING "%s: reset phy and link down now\n", + dev_name); + return -ETIME; + } + } + } + + if (sis_priv->chipset_rev == SIS630E_900_REV) { + /* SiS 630E has some bugs on default value of PHY registers */ + mdio_write(net_dev, sis_priv->cur_phy, MII_ANADV, 0x05e1); + mdio_write(net_dev, sis_priv->cur_phy, MII_CONFIG1, 0x22); + mdio_write(net_dev, sis_priv->cur_phy, MII_CONFIG2, 0xff00); + mdio_write(net_dev, sis_priv->cur_phy, MII_MASK, 0xffc0); + //mdio_write(net_dev, sis_priv->cur_phy, MII_CONTROL, 0x1000); + } + + if (sis_priv->mii->status & MII_STAT_LINK) + netif_carrier_on(net_dev); + else + netif_carrier_off(net_dev); + + return 1; +} + +/** + * sis900_default_phy - Select default PHY for sis900 mac. + * @net_dev: the net device to probe for + * + * Select first detected PHY with link as default. + * If no one is link on, select PHY whose types is HOME as default. + * If HOME doesn't exist, select LAN. + */ + +static u16 sis900_default_phy(struct net_device * net_dev) +{ + struct sis900_private *sis_priv = netdev_priv(net_dev); + struct mii_phy *phy = NULL, *phy_home = NULL, + *default_phy = NULL, *phy_lan = NULL; + u16 status; + + for (phy=sis_priv->first_mii; phy; phy=phy->next) { + status = mdio_read(net_dev, phy->phy_addr, MII_STATUS); + status = mdio_read(net_dev, phy->phy_addr, MII_STATUS); + + /* Link ON & Not select default PHY & not ghost PHY */ + if ((status & MII_STAT_LINK) && !default_phy && + (phy->phy_types != UNKNOWN)) { + default_phy = phy; + } else { + status = mdio_read(net_dev, phy->phy_addr, MII_CONTROL); + mdio_write(net_dev, phy->phy_addr, MII_CONTROL, + status | MII_CNTL_AUTO | MII_CNTL_ISOLATE); + if (phy->phy_types == HOME) + phy_home = phy; + else if(phy->phy_types == LAN) + phy_lan = phy; + } + } + + if (!default_phy && phy_home) + default_phy = phy_home; + else if (!default_phy && phy_lan) + default_phy = phy_lan; + else if (!default_phy) + default_phy = sis_priv->first_mii; + + if (sis_priv->mii != default_phy) { + sis_priv->mii = default_phy; + sis_priv->cur_phy = default_phy->phy_addr; + printk(KERN_INFO "%s: Using transceiver found at address %d as default\n", + pci_name(sis_priv->pci_dev), sis_priv->cur_phy); + } + + sis_priv->mii_info.phy_id = sis_priv->cur_phy; + + status = mdio_read(net_dev, sis_priv->cur_phy, MII_CONTROL); + status &= (~MII_CNTL_ISOLATE); + + mdio_write(net_dev, sis_priv->cur_phy, MII_CONTROL, status); + status = mdio_read(net_dev, sis_priv->cur_phy, MII_STATUS); + status = mdio_read(net_dev, sis_priv->cur_phy, MII_STATUS); + + return status; +} + + +/** + * sis900_set_capability - set the media capability of network adapter. + * @net_dev : the net device to probe for + * @phy : default PHY + * + * Set the media capability of network adapter according to + * mii status register. It's necessary before auto-negotiate. + */ + +static void sis900_set_capability(struct net_device *net_dev, struct mii_phy *phy) +{ + u16 cap; + + mdio_read(net_dev, phy->phy_addr, MII_STATUS); + mdio_read(net_dev, phy->phy_addr, MII_STATUS); + + cap = MII_NWAY_CSMA_CD | + ((phy->status & MII_STAT_CAN_TX_FDX)? MII_NWAY_TX_FDX:0) | + ((phy->status & MII_STAT_CAN_TX) ? MII_NWAY_TX:0) | + ((phy->status & MII_STAT_CAN_T_FDX) ? MII_NWAY_T_FDX:0)| + ((phy->status & MII_STAT_CAN_T) ? MII_NWAY_T:0); + + mdio_write(net_dev, phy->phy_addr, MII_ANADV, cap); +} + + +/* Delay between EEPROM clock transitions. */ +#define eeprom_delay() sr32(mear) + +/** + * read_eeprom - Read Serial EEPROM + * @ioaddr: base i/o address + * @location: the EEPROM location to read + * + * Read Serial EEPROM through EEPROM Access Register. + * Note that location is in word (16 bits) unit + */ + +static u16 read_eeprom(void __iomem *ioaddr, int location) +{ + u32 read_cmd = location | EEread; + int i; + u16 retval = 0; + + sw32(mear, 0); + eeprom_delay(); + sw32(mear, EECS); + eeprom_delay(); + + /* Shift the read command (9) bits out. */ + for (i = 8; i >= 0; i--) { + u32 dataval = (read_cmd & (1 << i)) ? EEDI | EECS : EECS; + + sw32(mear, dataval); + eeprom_delay(); + sw32(mear, dataval | EECLK); + eeprom_delay(); + } + sw32(mear, EECS); + eeprom_delay(); + + /* read the 16-bits data in */ + for (i = 16; i > 0; i--) { + sw32(mear, EECS); + eeprom_delay(); + sw32(mear, EECS | EECLK); + eeprom_delay(); + retval = (retval << 1) | ((sr32(mear) & EEDO) ? 1 : 0); + eeprom_delay(); + } + + /* Terminate the EEPROM access. */ + sw32(mear, 0); + eeprom_delay(); + + return retval; +} + +/* Read and write the MII management registers using software-generated + serial MDIO protocol. Note that the command bits and data bits are + send out separately */ +#define mdio_delay() sr32(mear) + +static void mdio_idle(struct sis900_private *sp) +{ + void __iomem *ioaddr = sp->ioaddr; + + sw32(mear, MDIO | MDDIR); + mdio_delay(); + sw32(mear, MDIO | MDDIR | MDC); +} + +/* Synchronize the MII management interface by shifting 32 one bits out. */ +static void mdio_reset(struct sis900_private *sp) +{ + void __iomem *ioaddr = sp->ioaddr; + int i; + + for (i = 31; i >= 0; i--) { + sw32(mear, MDDIR | MDIO); + mdio_delay(); + sw32(mear, MDDIR | MDIO | MDC); + mdio_delay(); + } +} + +/** + * mdio_read - read MII PHY register + * @net_dev: the net device to read + * @phy_id: the phy address to read + * @location: the phy register id to read + * + * Read MII registers through MDIO and MDC + * using MDIO management frame structure and protocol(defined by ISO/IEC). + * Please see SiS7014 or ICS spec + */ + +static int mdio_read(struct net_device *net_dev, int phy_id, int location) +{ + int mii_cmd = MIIread|(phy_id<ioaddr; + u16 retval = 0; + int i; + + mdio_reset(sp); + mdio_idle(sp); + + for (i = 15; i >= 0; i--) { + int dataval = (mii_cmd & (1 << i)) ? MDDIR | MDIO : MDDIR; + + sw32(mear, dataval); + mdio_delay(); + sw32(mear, dataval | MDC); + mdio_delay(); + } + + /* Read the 16 data bits. */ + for (i = 16; i > 0; i--) { + sw32(mear, 0); + mdio_delay(); + retval = (retval << 1) | ((sr32(mear) & MDIO) ? 1 : 0); + sw32(mear, MDC); + mdio_delay(); + } + sw32(mear, 0x00); + + return retval; +} + +/** + * mdio_write - write MII PHY register + * @net_dev: the net device to write + * @phy_id: the phy address to write + * @location: the phy register id to write + * @value: the register value to write with + * + * Write MII registers with @value through MDIO and MDC + * using MDIO management frame structure and protocol(defined by ISO/IEC) + * please see SiS7014 or ICS spec + */ + +static void mdio_write(struct net_device *net_dev, int phy_id, int location, + int value) +{ + int mii_cmd = MIIwrite|(phy_id<ioaddr; + int i; + + mdio_reset(sp); + mdio_idle(sp); + + /* Shift the command bits out. */ + for (i = 15; i >= 0; i--) { + int dataval = (mii_cmd & (1 << i)) ? MDDIR | MDIO : MDDIR; + + sw8(mear, dataval); + mdio_delay(); + sw8(mear, dataval | MDC); + mdio_delay(); + } + mdio_delay(); + + /* Shift the value bits out. */ + for (i = 15; i >= 0; i--) { + int dataval = (value & (1 << i)) ? MDDIR | MDIO : MDDIR; + + sw32(mear, dataval); + mdio_delay(); + sw32(mear, dataval | MDC); + mdio_delay(); + } + mdio_delay(); + + /* Clear out extra bits. */ + for (i = 2; i > 0; i--) { + sw8(mear, 0); + mdio_delay(); + sw8(mear, MDC); + mdio_delay(); + } + sw32(mear, 0x00); +} + + +/** + * sis900_reset_phy - reset sis900 mii phy. + * @net_dev: the net device to write + * @phy_addr: default phy address + * + * Some specific phy can't work properly without reset. + * This function will be called during initialization and + * link status change from ON to DOWN. + */ + +static u16 sis900_reset_phy(struct net_device *net_dev, int phy_addr) +{ + int i; + u16 status; + + for (i = 0; i < 2; i++) + status = mdio_read(net_dev, phy_addr, MII_STATUS); + + mdio_write( net_dev, phy_addr, MII_CONTROL, MII_CNTL_RESET ); + + return status; +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +/* + * Polling 'interrupt' - used by things like netconsole to send skbs + * without having to re-enable interrupts. It's not called while + * the interrupt routine is executing. +*/ +static void sis900_poll(struct net_device *dev) +{ + struct sis900_private *sp = netdev_priv(dev); + const int irq = sp->pci_dev->irq; + + disable_irq(irq); + sis900_interrupt(irq, dev); + enable_irq(irq); +} +#endif + +/** + * sis900_open - open sis900 device + * @net_dev: the net device to open + * + * Do some initialization and start net interface. + * enable interrupts and set sis900 timer. + */ + +static int +sis900_open(struct net_device *net_dev) +{ + struct sis900_private *sis_priv = netdev_priv(net_dev); + void __iomem *ioaddr = sis_priv->ioaddr; + int ret; + + /* Soft reset the chip. */ + sis900_reset(net_dev); + + /* Equalizer workaround Rule */ + sis630_set_eq(net_dev, sis_priv->chipset_rev); + + ret = request_irq(sis_priv->pci_dev->irq, sis900_interrupt, IRQF_SHARED, + net_dev->name, net_dev); + if (ret) + return ret; + + sis900_init_rxfilter(net_dev); + + sis900_init_tx_ring(net_dev); + sis900_init_rx_ring(net_dev); + + set_rx_mode(net_dev); + + netif_start_queue(net_dev); + + /* Workaround for EDB */ + sis900_set_mode(sis_priv, HW_SPEED_10_MBPS, FDX_CAPABLE_HALF_SELECTED); + + /* Enable all known interrupts by setting the interrupt mask. */ + sw32(imr, RxSOVR | RxORN | RxERR | RxOK | TxURN | TxERR | TxDESC); + sw32(cr, RxENA | sr32(cr)); + sw32(ier, IE); + + sis900_check_mode(net_dev, sis_priv->mii); + + /* Set the timer to switch to check for link beat and perhaps switch + to an alternate media type. */ + timer_setup(&sis_priv->timer, sis900_timer, 0); + sis_priv->timer.expires = jiffies + HZ; + add_timer(&sis_priv->timer); + + return 0; +} + +/** + * sis900_init_rxfilter - Initialize the Rx filter + * @net_dev: the net device to initialize for + * + * Set receive filter address to our MAC address + * and enable packet filtering. + */ + +static void +sis900_init_rxfilter (struct net_device * net_dev) +{ + struct sis900_private *sis_priv = netdev_priv(net_dev); + void __iomem *ioaddr = sis_priv->ioaddr; + u32 rfcrSave; + u32 i; + + rfcrSave = sr32(rfcr); + + /* disable packet filtering before setting filter */ + sw32(rfcr, rfcrSave & ~RFEN); + + /* load MAC addr to filter data register */ + for (i = 0 ; i < 3 ; i++) { + u32 w = (u32) *((const u16 *)(net_dev->dev_addr)+i); + + sw32(rfcr, i << RFADDR_shift); + sw32(rfdr, w); + + if (netif_msg_hw(sis_priv)) { + printk(KERN_DEBUG "%s: Receive Filter Address[%d]=%x\n", + net_dev->name, i, sr32(rfdr)); + } + } + + /* enable packet filtering */ + sw32(rfcr, rfcrSave | RFEN); +} + +/** + * sis900_init_tx_ring - Initialize the Tx descriptor ring + * @net_dev: the net device to initialize for + * + * Initialize the Tx descriptor ring, + */ + +static void +sis900_init_tx_ring(struct net_device *net_dev) +{ + struct sis900_private *sis_priv = netdev_priv(net_dev); + void __iomem *ioaddr = sis_priv->ioaddr; + int i; + + sis_priv->tx_full = 0; + sis_priv->dirty_tx = sis_priv->cur_tx = 0; + + for (i = 0; i < NUM_TX_DESC; i++) { + sis_priv->tx_skbuff[i] = NULL; + + sis_priv->tx_ring[i].link = sis_priv->tx_ring_dma + + ((i+1)%NUM_TX_DESC)*sizeof(BufferDesc); + sis_priv->tx_ring[i].cmdsts = 0; + sis_priv->tx_ring[i].bufptr = 0; + } + + /* load Transmit Descriptor Register */ + sw32(txdp, sis_priv->tx_ring_dma); + if (netif_msg_hw(sis_priv)) + printk(KERN_DEBUG "%s: TX descriptor register loaded with: %8.8x\n", + net_dev->name, sr32(txdp)); +} + +/** + * sis900_init_rx_ring - Initialize the Rx descriptor ring + * @net_dev: the net device to initialize for + * + * Initialize the Rx descriptor ring, + * and pre-allocate receive buffers (socket buffer) + */ + +static void +sis900_init_rx_ring(struct net_device *net_dev) +{ + struct sis900_private *sis_priv = netdev_priv(net_dev); + void __iomem *ioaddr = sis_priv->ioaddr; + int i; + + sis_priv->cur_rx = 0; + sis_priv->dirty_rx = 0; + + /* init RX descriptor */ + for (i = 0; i < NUM_RX_DESC; i++) { + sis_priv->rx_skbuff[i] = NULL; + + sis_priv->rx_ring[i].link = sis_priv->rx_ring_dma + + ((i+1)%NUM_RX_DESC)*sizeof(BufferDesc); + sis_priv->rx_ring[i].cmdsts = 0; + sis_priv->rx_ring[i].bufptr = 0; + } + + /* allocate sock buffers */ + for (i = 0; i < NUM_RX_DESC; i++) { + struct sk_buff *skb; + + if ((skb = netdev_alloc_skb(net_dev, RX_BUF_SIZE)) == NULL) { + /* not enough memory for skbuff, this makes a "hole" + on the buffer ring, it is not clear how the + hardware will react to this kind of degenerated + buffer */ + break; + } + sis_priv->rx_skbuff[i] = skb; + sis_priv->rx_ring[i].cmdsts = RX_BUF_SIZE; + sis_priv->rx_ring[i].bufptr = dma_map_single(&sis_priv->pci_dev->dev, + skb->data, + RX_BUF_SIZE, + DMA_FROM_DEVICE); + if (unlikely(dma_mapping_error(&sis_priv->pci_dev->dev, + sis_priv->rx_ring[i].bufptr))) { + dev_kfree_skb(skb); + sis_priv->rx_skbuff[i] = NULL; + break; + } + } + sis_priv->dirty_rx = (unsigned int) (i - NUM_RX_DESC); + + /* load Receive Descriptor Register */ + sw32(rxdp, sis_priv->rx_ring_dma); + if (netif_msg_hw(sis_priv)) + printk(KERN_DEBUG "%s: RX descriptor register loaded with: %8.8x\n", + net_dev->name, sr32(rxdp)); +} + +/** + * sis630_set_eq - set phy equalizer value for 630 LAN + * @net_dev: the net device to set equalizer value + * @revision: 630 LAN revision number + * + * 630E equalizer workaround rule(Cyrus Huang 08/15) + * PHY register 14h(Test) + * Bit 14: 0 -- Automatically detect (default) + * 1 -- Manually set Equalizer filter + * Bit 13: 0 -- (Default) + * 1 -- Speed up convergence of equalizer setting + * Bit 9 : 0 -- (Default) + * 1 -- Disable Baseline Wander + * Bit 3~7 -- Equalizer filter setting + * Link ON: Set Bit 9, 13 to 1, Bit 14 to 0 + * Then calculate equalizer value + * Then set equalizer value, and set Bit 14 to 1, Bit 9 to 0 + * Link Off:Set Bit 13 to 1, Bit 14 to 0 + * Calculate Equalizer value: + * When Link is ON and Bit 14 is 0, SIS900PHY will auto-detect proper equalizer value. + * When the equalizer is stable, this value is not a fixed value. It will be within + * a small range(eg. 7~9). Then we get a minimum and a maximum value(eg. min=7, max=9) + * 0 <= max <= 4 --> set equalizer to max + * 5 <= max <= 14 --> set equalizer to max+1 or set equalizer to max+2 if max == min + * max >= 15 --> set equalizer to max+5 or set equalizer to max+6 if max == min + */ + +static void sis630_set_eq(struct net_device *net_dev, u8 revision) +{ + struct sis900_private *sis_priv = netdev_priv(net_dev); + u16 reg14h, eq_value=0, max_value=0, min_value=0; + int i, maxcount=10; + + if ( !(revision == SIS630E_900_REV || revision == SIS630EA1_900_REV || + revision == SIS630A_900_REV || revision == SIS630ET_900_REV) ) + return; + + if (netif_carrier_ok(net_dev)) { + reg14h = mdio_read(net_dev, sis_priv->cur_phy, MII_RESV); + mdio_write(net_dev, sis_priv->cur_phy, MII_RESV, + (0x2200 | reg14h) & 0xBFFF); + for (i=0; i < maxcount; i++) { + eq_value = (0x00F8 & mdio_read(net_dev, + sis_priv->cur_phy, MII_RESV)) >> 3; + if (i == 0) + max_value=min_value=eq_value; + max_value = (eq_value > max_value) ? + eq_value : max_value; + min_value = (eq_value < min_value) ? + eq_value : min_value; + } + /* 630E rule to determine the equalizer value */ + if (revision == SIS630E_900_REV || revision == SIS630EA1_900_REV || + revision == SIS630ET_900_REV) { + if (max_value < 5) + eq_value = max_value; + else if (max_value >= 5 && max_value < 15) + eq_value = (max_value == min_value) ? + max_value+2 : max_value+1; + else if (max_value >= 15) + eq_value=(max_value == min_value) ? + max_value+6 : max_value+5; + } + /* 630B0&B1 rule to determine the equalizer value */ + if (revision == SIS630A_900_REV && + (sis_priv->host_bridge_rev == SIS630B0 || + sis_priv->host_bridge_rev == SIS630B1)) { + if (max_value == 0) + eq_value = 3; + else + eq_value = (max_value + min_value + 1)/2; + } + /* write equalizer value and setting */ + reg14h = mdio_read(net_dev, sis_priv->cur_phy, MII_RESV); + reg14h = (reg14h & 0xFF07) | ((eq_value << 3) & 0x00F8); + reg14h = (reg14h | 0x6000) & 0xFDFF; + mdio_write(net_dev, sis_priv->cur_phy, MII_RESV, reg14h); + } else { + reg14h = mdio_read(net_dev, sis_priv->cur_phy, MII_RESV); + if (revision == SIS630A_900_REV && + (sis_priv->host_bridge_rev == SIS630B0 || + sis_priv->host_bridge_rev == SIS630B1)) + mdio_write(net_dev, sis_priv->cur_phy, MII_RESV, + (reg14h | 0x2200) & 0xBFFF); + else + mdio_write(net_dev, sis_priv->cur_phy, MII_RESV, + (reg14h | 0x2000) & 0xBFFF); + } +} + +/** + * sis900_timer - sis900 timer routine + * @t: timer list containing a pointer to sis900 net device + * + * On each timer ticks we check two things, + * link status (ON/OFF) and link mode (10/100/Full/Half) + */ + +static void sis900_timer(struct timer_list *t) +{ + struct sis900_private *sis_priv = from_timer(sis_priv, t, timer); + struct net_device *net_dev = sis_priv->mii_info.dev; + struct mii_phy *mii_phy = sis_priv->mii; + static const int next_tick = 5*HZ; + int speed = 0, duplex = 0; + u16 status; + + status = mdio_read(net_dev, sis_priv->cur_phy, MII_STATUS); + status = mdio_read(net_dev, sis_priv->cur_phy, MII_STATUS); + + /* Link OFF -> ON */ + if (!netif_carrier_ok(net_dev)) { + LookForLink: + /* Search for new PHY */ + status = sis900_default_phy(net_dev); + mii_phy = sis_priv->mii; + + if (status & MII_STAT_LINK) { + WARN_ON(!(status & MII_STAT_AUTO_DONE)); + + sis900_read_mode(net_dev, &speed, &duplex); + if (duplex) { + sis900_set_mode(sis_priv, speed, duplex); + sis630_set_eq(net_dev, sis_priv->chipset_rev); + netif_carrier_on(net_dev); + } + } + } else { + /* Link ON -> OFF */ + if (!(status & MII_STAT_LINK)){ + netif_carrier_off(net_dev); + if(netif_msg_link(sis_priv)) + printk(KERN_INFO "%s: Media Link Off\n", net_dev->name); + + /* Change mode issue */ + if ((mii_phy->phy_id0 == 0x001D) && + ((mii_phy->phy_id1 & 0xFFF0) == 0x8000)) + sis900_reset_phy(net_dev, sis_priv->cur_phy); + + sis630_set_eq(net_dev, sis_priv->chipset_rev); + + goto LookForLink; + } + } + + sis_priv->timer.expires = jiffies + next_tick; + add_timer(&sis_priv->timer); +} + +/** + * sis900_check_mode - check the media mode for sis900 + * @net_dev: the net device to be checked + * @mii_phy: the mii phy + * + * Older driver gets the media mode from mii status output + * register. Now we set our media capability and auto-negotiate + * to get the upper bound of speed and duplex between two ends. + * If the types of mii phy is HOME, it doesn't need to auto-negotiate + * and autong_complete should be set to 1. + */ + +static void sis900_check_mode(struct net_device *net_dev, struct mii_phy *mii_phy) +{ + struct sis900_private *sis_priv = netdev_priv(net_dev); + void __iomem *ioaddr = sis_priv->ioaddr; + int speed, duplex; + + if (mii_phy->phy_types == LAN) { + sw32(cfg, ~EXD & sr32(cfg)); + sis900_set_capability(net_dev , mii_phy); + sis900_auto_negotiate(net_dev, sis_priv->cur_phy); + } else { + sw32(cfg, EXD | sr32(cfg)); + speed = HW_SPEED_HOME; + duplex = FDX_CAPABLE_HALF_SELECTED; + sis900_set_mode(sis_priv, speed, duplex); + sis_priv->autong_complete = 1; + } +} + +/** + * sis900_set_mode - Set the media mode of mac register. + * @sp: the device private data + * @speed : the transmit speed to be determined + * @duplex: the duplex mode to be determined + * + * Set the media mode of mac register txcfg/rxcfg according to + * speed and duplex of phy. Bit EDB_MASTER_EN indicates the EDB + * bus is used instead of PCI bus. When this bit is set 1, the + * Max DMA Burst Size for TX/RX DMA should be no larger than 16 + * double words. + */ + +static void sis900_set_mode(struct sis900_private *sp, int speed, int duplex) +{ + void __iomem *ioaddr = sp->ioaddr; + u32 tx_flags = 0, rx_flags = 0; + + if (sr32( cfg) & EDB_MASTER_EN) { + tx_flags = TxATP | (DMA_BURST_64 << TxMXDMA_shift) | + (TX_FILL_THRESH << TxFILLT_shift); + rx_flags = DMA_BURST_64 << RxMXDMA_shift; + } else { + tx_flags = TxATP | (DMA_BURST_512 << TxMXDMA_shift) | + (TX_FILL_THRESH << TxFILLT_shift); + rx_flags = DMA_BURST_512 << RxMXDMA_shift; + } + + if (speed == HW_SPEED_HOME || speed == HW_SPEED_10_MBPS) { + rx_flags |= (RxDRNT_10 << RxDRNT_shift); + tx_flags |= (TxDRNT_10 << TxDRNT_shift); + } else { + rx_flags |= (RxDRNT_100 << RxDRNT_shift); + tx_flags |= (TxDRNT_100 << TxDRNT_shift); + } + + if (duplex == FDX_CAPABLE_FULL_SELECTED) { + tx_flags |= (TxCSI | TxHBI); + rx_flags |= RxATX; + } + +#if IS_ENABLED(CONFIG_VLAN_8021Q) + /* Can accept Jumbo packet */ + rx_flags |= RxAJAB; +#endif + + sw32(txcfg, tx_flags); + sw32(rxcfg, rx_flags); +} + +/** + * sis900_auto_negotiate - Set the Auto-Negotiation Enable/Reset bit. + * @net_dev: the net device to read mode for + * @phy_addr: mii phy address + * + * If the adapter is link-on, set the auto-negotiate enable/reset bit. + * autong_complete should be set to 0 when starting auto-negotiation. + * autong_complete should be set to 1 if we didn't start auto-negotiation. + * sis900_timer will wait for link on again if autong_complete = 0. + */ + +static void sis900_auto_negotiate(struct net_device *net_dev, int phy_addr) +{ + struct sis900_private *sis_priv = netdev_priv(net_dev); + int i = 0; + u32 status; + + for (i = 0; i < 2; i++) + status = mdio_read(net_dev, phy_addr, MII_STATUS); + + if (!(status & MII_STAT_LINK)){ + if(netif_msg_link(sis_priv)) + printk(KERN_INFO "%s: Media Link Off\n", net_dev->name); + sis_priv->autong_complete = 1; + netif_carrier_off(net_dev); + return; + } + + /* (Re)start AutoNegotiate */ + mdio_write(net_dev, phy_addr, MII_CONTROL, + MII_CNTL_AUTO | MII_CNTL_RST_AUTO); + sis_priv->autong_complete = 0; +} + + +/** + * sis900_read_mode - read media mode for sis900 internal phy + * @net_dev: the net device to read mode for + * @speed : the transmit speed to be determined + * @duplex : the duplex mode to be determined + * + * The capability of remote end will be put in mii register autorec + * after auto-negotiation. Use AND operation to get the upper bound + * of speed and duplex between two ends. + */ + +static void sis900_read_mode(struct net_device *net_dev, int *speed, int *duplex) +{ + struct sis900_private *sis_priv = netdev_priv(net_dev); + struct mii_phy *phy = sis_priv->mii; + int phy_addr = sis_priv->cur_phy; + u32 status; + u16 autoadv, autorec; + int i; + + for (i = 0; i < 2; i++) + status = mdio_read(net_dev, phy_addr, MII_STATUS); + + if (!(status & MII_STAT_LINK)) + return; + + /* AutoNegotiate completed */ + autoadv = mdio_read(net_dev, phy_addr, MII_ANADV); + autorec = mdio_read(net_dev, phy_addr, MII_ANLPAR); + status = autoadv & autorec; + + *speed = HW_SPEED_10_MBPS; + *duplex = FDX_CAPABLE_HALF_SELECTED; + + if (status & (MII_NWAY_TX | MII_NWAY_TX_FDX)) + *speed = HW_SPEED_100_MBPS; + if (status & ( MII_NWAY_TX_FDX | MII_NWAY_T_FDX)) + *duplex = FDX_CAPABLE_FULL_SELECTED; + + sis_priv->autong_complete = 1; + + /* Workaround for Realtek RTL8201 PHY issue */ + if ((phy->phy_id0 == 0x0000) && ((phy->phy_id1 & 0xFFF0) == 0x8200)) { + if (mdio_read(net_dev, phy_addr, MII_CONTROL) & MII_CNTL_FDX) + *duplex = FDX_CAPABLE_FULL_SELECTED; + if (mdio_read(net_dev, phy_addr, 0x0019) & 0x01) + *speed = HW_SPEED_100_MBPS; + } + + if(netif_msg_link(sis_priv)) + printk(KERN_INFO "%s: Media Link On %s %s-duplex\n", + net_dev->name, + *speed == HW_SPEED_100_MBPS ? + "100mbps" : "10mbps", + *duplex == FDX_CAPABLE_FULL_SELECTED ? + "full" : "half"); +} + +/** + * sis900_tx_timeout - sis900 transmit timeout routine + * @net_dev: the net device to transmit + * @txqueue: index of hanging queue + * + * print transmit timeout status + * disable interrupts and do some tasks + */ + +static void sis900_tx_timeout(struct net_device *net_dev, unsigned int txqueue) +{ + struct sis900_private *sis_priv = netdev_priv(net_dev); + void __iomem *ioaddr = sis_priv->ioaddr; + unsigned long flags; + int i; + + if (netif_msg_tx_err(sis_priv)) { + printk(KERN_INFO "%s: Transmit timeout, status %8.8x %8.8x\n", + net_dev->name, sr32(cr), sr32(isr)); + } + + /* Disable interrupts by clearing the interrupt mask. */ + sw32(imr, 0x0000); + + /* use spinlock to prevent interrupt handler accessing buffer ring */ + spin_lock_irqsave(&sis_priv->lock, flags); + + /* discard unsent packets */ + sis_priv->dirty_tx = sis_priv->cur_tx = 0; + for (i = 0; i < NUM_TX_DESC; i++) { + struct sk_buff *skb = sis_priv->tx_skbuff[i]; + + if (skb) { + dma_unmap_single(&sis_priv->pci_dev->dev, + sis_priv->tx_ring[i].bufptr, + skb->len, DMA_TO_DEVICE); + dev_kfree_skb_irq(skb); + sis_priv->tx_skbuff[i] = NULL; + sis_priv->tx_ring[i].cmdsts = 0; + sis_priv->tx_ring[i].bufptr = 0; + net_dev->stats.tx_dropped++; + } + } + sis_priv->tx_full = 0; + netif_wake_queue(net_dev); + + spin_unlock_irqrestore(&sis_priv->lock, flags); + + netif_trans_update(net_dev); /* prevent tx timeout */ + + /* load Transmit Descriptor Register */ + sw32(txdp, sis_priv->tx_ring_dma); + + /* Enable all known interrupts by setting the interrupt mask. */ + sw32(imr, RxSOVR | RxORN | RxERR | RxOK | TxURN | TxERR | TxDESC); +} + +/** + * sis900_start_xmit - sis900 start transmit routine + * @skb: socket buffer pointer to put the data being transmitted + * @net_dev: the net device to transmit with + * + * Set the transmit buffer descriptor, + * and write TxENA to enable transmit state machine. + * tell upper layer if the buffer is full + */ + +static netdev_tx_t +sis900_start_xmit(struct sk_buff *skb, struct net_device *net_dev) +{ + struct sis900_private *sis_priv = netdev_priv(net_dev); + void __iomem *ioaddr = sis_priv->ioaddr; + unsigned int entry; + unsigned long flags; + unsigned int index_cur_tx, index_dirty_tx; + unsigned int count_dirty_tx; + + spin_lock_irqsave(&sis_priv->lock, flags); + + /* Calculate the next Tx descriptor entry. */ + entry = sis_priv->cur_tx % NUM_TX_DESC; + sis_priv->tx_skbuff[entry] = skb; + + /* set the transmit buffer descriptor and enable Transmit State Machine */ + sis_priv->tx_ring[entry].bufptr = dma_map_single(&sis_priv->pci_dev->dev, + skb->data, skb->len, + DMA_TO_DEVICE); + if (unlikely(dma_mapping_error(&sis_priv->pci_dev->dev, + sis_priv->tx_ring[entry].bufptr))) { + dev_kfree_skb_any(skb); + sis_priv->tx_skbuff[entry] = NULL; + net_dev->stats.tx_dropped++; + spin_unlock_irqrestore(&sis_priv->lock, flags); + return NETDEV_TX_OK; + } + sis_priv->tx_ring[entry].cmdsts = (OWN | INTR | skb->len); + sw32(cr, TxENA | sr32(cr)); + + sis_priv->cur_tx ++; + index_cur_tx = sis_priv->cur_tx; + index_dirty_tx = sis_priv->dirty_tx; + + for (count_dirty_tx = 0; index_cur_tx != index_dirty_tx; index_dirty_tx++) + count_dirty_tx ++; + + if (index_cur_tx == index_dirty_tx) { + /* dirty_tx is met in the cycle of cur_tx, buffer full */ + sis_priv->tx_full = 1; + netif_stop_queue(net_dev); + } else if (count_dirty_tx < NUM_TX_DESC) { + /* Typical path, tell upper layer that more transmission is possible */ + netif_start_queue(net_dev); + } else { + /* buffer full, tell upper layer no more transmission */ + sis_priv->tx_full = 1; + netif_stop_queue(net_dev); + } + + spin_unlock_irqrestore(&sis_priv->lock, flags); + + if (netif_msg_tx_queued(sis_priv)) + printk(KERN_DEBUG "%s: Queued Tx packet at %p size %d " + "to slot %d.\n", + net_dev->name, skb->data, (int)skb->len, entry); + + return NETDEV_TX_OK; +} + +/** + * sis900_interrupt - sis900 interrupt handler + * @irq: the irq number + * @dev_instance: the client data object + * + * The interrupt handler does all of the Rx thread work, + * and cleans up after the Tx thread + */ + +static irqreturn_t sis900_interrupt(int irq, void *dev_instance) +{ + struct net_device *net_dev = dev_instance; + struct sis900_private *sis_priv = netdev_priv(net_dev); + int boguscnt = max_interrupt_work; + void __iomem *ioaddr = sis_priv->ioaddr; + u32 status; + unsigned int handled = 0; + + spin_lock (&sis_priv->lock); + + do { + status = sr32(isr); + + if ((status & (HIBERR|TxURN|TxERR|TxDESC|RxORN|RxERR|RxOK)) == 0) + /* nothing interesting happened */ + break; + handled = 1; + + /* why dow't we break after Tx/Rx case ?? keyword: full-duplex */ + if (status & (RxORN | RxERR | RxOK)) + /* Rx interrupt */ + sis900_rx(net_dev); + + if (status & (TxURN | TxERR | TxDESC)) + /* Tx interrupt */ + sis900_finish_xmit(net_dev); + + /* something strange happened !!! */ + if (status & HIBERR) { + if(netif_msg_intr(sis_priv)) + printk(KERN_INFO "%s: Abnormal interrupt, " + "status %#8.8x.\n", net_dev->name, status); + break; + } + if (--boguscnt < 0) { + if(netif_msg_intr(sis_priv)) + printk(KERN_INFO "%s: Too much work at interrupt, " + "interrupt status = %#8.8x.\n", + net_dev->name, status); + break; + } + } while (1); + + if(netif_msg_intr(sis_priv)) + printk(KERN_DEBUG "%s: exiting interrupt, " + "interrupt status = %#8.8x\n", + net_dev->name, sr32(isr)); + + spin_unlock (&sis_priv->lock); + return IRQ_RETVAL(handled); +} + +/** + * sis900_rx - sis900 receive routine + * @net_dev: the net device which receives data + * + * Process receive interrupt events, + * put buffer to higher layer and refill buffer pool + * Note: This function is called by interrupt handler, + * don't do "too much" work here + */ + +static int sis900_rx(struct net_device *net_dev) +{ + struct sis900_private *sis_priv = netdev_priv(net_dev); + void __iomem *ioaddr = sis_priv->ioaddr; + unsigned int entry = sis_priv->cur_rx % NUM_RX_DESC; + u32 rx_status = sis_priv->rx_ring[entry].cmdsts; + int rx_work_limit; + + if (netif_msg_rx_status(sis_priv)) + printk(KERN_DEBUG "sis900_rx, cur_rx:%4.4d, dirty_rx:%4.4d " + "status:0x%8.8x\n", + sis_priv->cur_rx, sis_priv->dirty_rx, rx_status); + rx_work_limit = sis_priv->dirty_rx + NUM_RX_DESC - sis_priv->cur_rx; + + while (rx_status & OWN) { + unsigned int rx_size; + unsigned int data_size; + + if (--rx_work_limit < 0) + break; + + data_size = rx_status & DSIZE; + rx_size = data_size - CRC_SIZE; + +#if IS_ENABLED(CONFIG_VLAN_8021Q) + /* ``TOOLONG'' flag means jumbo packet received. */ + if ((rx_status & TOOLONG) && data_size <= MAX_FRAME_SIZE) + rx_status &= (~ ((unsigned int)TOOLONG)); +#endif + + if (rx_status & (ABORT|OVERRUN|TOOLONG|RUNT|RXISERR|CRCERR|FAERR)) { + /* corrupted packet received */ + if (netif_msg_rx_err(sis_priv)) + printk(KERN_DEBUG "%s: Corrupted packet " + "received, buffer status = 0x%8.8x/%d.\n", + net_dev->name, rx_status, data_size); + net_dev->stats.rx_errors++; + if (rx_status & OVERRUN) + net_dev->stats.rx_over_errors++; + if (rx_status & (TOOLONG|RUNT)) + net_dev->stats.rx_length_errors++; + if (rx_status & (RXISERR | FAERR)) + net_dev->stats.rx_frame_errors++; + if (rx_status & CRCERR) + net_dev->stats.rx_crc_errors++; + /* reset buffer descriptor state */ + sis_priv->rx_ring[entry].cmdsts = RX_BUF_SIZE; + } else { + struct sk_buff * skb; + struct sk_buff * rx_skb; + + dma_unmap_single(&sis_priv->pci_dev->dev, + sis_priv->rx_ring[entry].bufptr, + RX_BUF_SIZE, DMA_FROM_DEVICE); + + /* refill the Rx buffer, what if there is not enough + * memory for new socket buffer ?? */ + if ((skb = netdev_alloc_skb(net_dev, RX_BUF_SIZE)) == NULL) { + /* + * Not enough memory to refill the buffer + * so we need to recycle the old one so + * as to avoid creating a memory hole + * in the rx ring + */ + skb = sis_priv->rx_skbuff[entry]; + net_dev->stats.rx_dropped++; + goto refill_rx_ring; + } + + /* This situation should never happen, but due to + some unknown bugs, it is possible that + we are working on NULL sk_buff :-( */ + if (sis_priv->rx_skbuff[entry] == NULL) { + if (netif_msg_rx_err(sis_priv)) + printk(KERN_WARNING "%s: NULL pointer " + "encountered in Rx ring\n" + "cur_rx:%4.4d, dirty_rx:%4.4d\n", + net_dev->name, sis_priv->cur_rx, + sis_priv->dirty_rx); + dev_kfree_skb(skb); + break; + } + + /* give the socket buffer to upper layers */ + rx_skb = sis_priv->rx_skbuff[entry]; + skb_put(rx_skb, rx_size); + rx_skb->protocol = eth_type_trans(rx_skb, net_dev); + netif_rx(rx_skb); + + /* some network statistics */ + if ((rx_status & BCAST) == MCAST) + net_dev->stats.multicast++; + net_dev->stats.rx_bytes += rx_size; + net_dev->stats.rx_packets++; + sis_priv->dirty_rx++; +refill_rx_ring: + sis_priv->rx_skbuff[entry] = skb; + sis_priv->rx_ring[entry].cmdsts = RX_BUF_SIZE; + sis_priv->rx_ring[entry].bufptr = + dma_map_single(&sis_priv->pci_dev->dev, + skb->data, RX_BUF_SIZE, + DMA_FROM_DEVICE); + if (unlikely(dma_mapping_error(&sis_priv->pci_dev->dev, + sis_priv->rx_ring[entry].bufptr))) { + dev_kfree_skb_irq(skb); + sis_priv->rx_skbuff[entry] = NULL; + break; + } + } + sis_priv->cur_rx++; + entry = sis_priv->cur_rx % NUM_RX_DESC; + rx_status = sis_priv->rx_ring[entry].cmdsts; + } // while + + /* refill the Rx buffer, what if the rate of refilling is slower + * than consuming ?? */ + for (; sis_priv->cur_rx != sis_priv->dirty_rx; sis_priv->dirty_rx++) { + struct sk_buff *skb; + + entry = sis_priv->dirty_rx % NUM_RX_DESC; + + if (sis_priv->rx_skbuff[entry] == NULL) { + skb = netdev_alloc_skb(net_dev, RX_BUF_SIZE); + if (skb == NULL) { + /* not enough memory for skbuff, this makes a + * "hole" on the buffer ring, it is not clear + * how the hardware will react to this kind + * of degenerated buffer */ + net_dev->stats.rx_dropped++; + break; + } + sis_priv->rx_skbuff[entry] = skb; + sis_priv->rx_ring[entry].cmdsts = RX_BUF_SIZE; + sis_priv->rx_ring[entry].bufptr = + dma_map_single(&sis_priv->pci_dev->dev, + skb->data, RX_BUF_SIZE, + DMA_FROM_DEVICE); + if (unlikely(dma_mapping_error(&sis_priv->pci_dev->dev, + sis_priv->rx_ring[entry].bufptr))) { + dev_kfree_skb_irq(skb); + sis_priv->rx_skbuff[entry] = NULL; + break; + } + } + } + /* re-enable the potentially idle receive state matchine */ + sw32(cr , RxENA | sr32(cr)); + + return 0; +} + +/** + * sis900_finish_xmit - finish up transmission of packets + * @net_dev: the net device to be transmitted on + * + * Check for error condition and free socket buffer etc + * schedule for more transmission as needed + * Note: This function is called by interrupt handler, + * don't do "too much" work here + */ + +static void sis900_finish_xmit (struct net_device *net_dev) +{ + struct sis900_private *sis_priv = netdev_priv(net_dev); + + for (; sis_priv->dirty_tx != sis_priv->cur_tx; sis_priv->dirty_tx++) { + struct sk_buff *skb; + unsigned int entry; + u32 tx_status; + + entry = sis_priv->dirty_tx % NUM_TX_DESC; + tx_status = sis_priv->tx_ring[entry].cmdsts; + + if (tx_status & OWN) { + /* The packet is not transmitted yet (owned by hardware) ! + * Note: this is an almost impossible condition + * on TxDESC interrupt ('descriptor interrupt') */ + break; + } + + if (tx_status & (ABORT | UNDERRUN | OWCOLL)) { + /* packet unsuccessfully transmitted */ + if (netif_msg_tx_err(sis_priv)) + printk(KERN_DEBUG "%s: Transmit " + "error, Tx status %8.8x.\n", + net_dev->name, tx_status); + net_dev->stats.tx_errors++; + if (tx_status & UNDERRUN) + net_dev->stats.tx_fifo_errors++; + if (tx_status & ABORT) + net_dev->stats.tx_aborted_errors++; + if (tx_status & NOCARRIER) + net_dev->stats.tx_carrier_errors++; + if (tx_status & OWCOLL) + net_dev->stats.tx_window_errors++; + } else { + /* packet successfully transmitted */ + net_dev->stats.collisions += (tx_status & COLCNT) >> 16; + net_dev->stats.tx_bytes += tx_status & DSIZE; + net_dev->stats.tx_packets++; + } + /* Free the original skb. */ + skb = sis_priv->tx_skbuff[entry]; + dma_unmap_single(&sis_priv->pci_dev->dev, + sis_priv->tx_ring[entry].bufptr, skb->len, + DMA_TO_DEVICE); + dev_consume_skb_irq(skb); + sis_priv->tx_skbuff[entry] = NULL; + sis_priv->tx_ring[entry].bufptr = 0; + sis_priv->tx_ring[entry].cmdsts = 0; + } + + if (sis_priv->tx_full && netif_queue_stopped(net_dev) && + sis_priv->cur_tx - sis_priv->dirty_tx < NUM_TX_DESC - 4) { + /* The ring is no longer full, clear tx_full and schedule + * more transmission by netif_wake_queue(net_dev) */ + sis_priv->tx_full = 0; + netif_wake_queue (net_dev); + } +} + +/** + * sis900_close - close sis900 device + * @net_dev: the net device to be closed + * + * Disable interrupts, stop the Tx and Rx Status Machine + * free Tx and RX socket buffer + */ + +static int sis900_close(struct net_device *net_dev) +{ + struct sis900_private *sis_priv = netdev_priv(net_dev); + struct pci_dev *pdev = sis_priv->pci_dev; + void __iomem *ioaddr = sis_priv->ioaddr; + struct sk_buff *skb; + int i; + + netif_stop_queue(net_dev); + + /* Disable interrupts by clearing the interrupt mask. */ + sw32(imr, 0x0000); + sw32(ier, 0x0000); + + /* Stop the chip's Tx and Rx Status Machine */ + sw32(cr, RxDIS | TxDIS | sr32(cr)); + + del_timer(&sis_priv->timer); + + free_irq(pdev->irq, net_dev); + + /* Free Tx and RX skbuff */ + for (i = 0; i < NUM_RX_DESC; i++) { + skb = sis_priv->rx_skbuff[i]; + if (skb) { + dma_unmap_single(&pdev->dev, + sis_priv->rx_ring[i].bufptr, + RX_BUF_SIZE, DMA_FROM_DEVICE); + dev_kfree_skb(skb); + sis_priv->rx_skbuff[i] = NULL; + } + } + for (i = 0; i < NUM_TX_DESC; i++) { + skb = sis_priv->tx_skbuff[i]; + if (skb) { + dma_unmap_single(&pdev->dev, + sis_priv->tx_ring[i].bufptr, + skb->len, DMA_TO_DEVICE); + dev_kfree_skb(skb); + sis_priv->tx_skbuff[i] = NULL; + } + } + + /* Green! Put the chip in low-power mode. */ + + return 0; +} + +/** + * sis900_get_drvinfo - Return information about driver + * @net_dev: the net device to probe + * @info: container for info returned + * + * Process ethtool command such as "ehtool -i" to show information + */ + +static void sis900_get_drvinfo(struct net_device *net_dev, + struct ethtool_drvinfo *info) +{ + struct sis900_private *sis_priv = netdev_priv(net_dev); + + strscpy(info->driver, SIS900_MODULE_NAME, sizeof(info->driver)); + strscpy(info->version, SIS900_DRV_VERSION, sizeof(info->version)); + strscpy(info->bus_info, pci_name(sis_priv->pci_dev), + sizeof(info->bus_info)); +} + +static u32 sis900_get_msglevel(struct net_device *net_dev) +{ + struct sis900_private *sis_priv = netdev_priv(net_dev); + return sis_priv->msg_enable; +} + +static void sis900_set_msglevel(struct net_device *net_dev, u32 value) +{ + struct sis900_private *sis_priv = netdev_priv(net_dev); + sis_priv->msg_enable = value; +} + +static u32 sis900_get_link(struct net_device *net_dev) +{ + struct sis900_private *sis_priv = netdev_priv(net_dev); + return mii_link_ok(&sis_priv->mii_info); +} + +static int sis900_get_link_ksettings(struct net_device *net_dev, + struct ethtool_link_ksettings *cmd) +{ + struct sis900_private *sis_priv = netdev_priv(net_dev); + spin_lock_irq(&sis_priv->lock); + mii_ethtool_get_link_ksettings(&sis_priv->mii_info, cmd); + spin_unlock_irq(&sis_priv->lock); + return 0; +} + +static int sis900_set_link_ksettings(struct net_device *net_dev, + const struct ethtool_link_ksettings *cmd) +{ + struct sis900_private *sis_priv = netdev_priv(net_dev); + int rt; + spin_lock_irq(&sis_priv->lock); + rt = mii_ethtool_set_link_ksettings(&sis_priv->mii_info, cmd); + spin_unlock_irq(&sis_priv->lock); + return rt; +} + +static int sis900_nway_reset(struct net_device *net_dev) +{ + struct sis900_private *sis_priv = netdev_priv(net_dev); + return mii_nway_restart(&sis_priv->mii_info); +} + +/** + * sis900_set_wol - Set up Wake on Lan registers + * @net_dev: the net device to probe + * @wol: container for info passed to the driver + * + * Process ethtool command "wol" to setup wake on lan features. + * SiS900 supports sending WoL events if a correct packet is received, + * but there is no simple way to filter them to only a subset (broadcast, + * multicast, unicast or arp). + */ + +static int sis900_set_wol(struct net_device *net_dev, struct ethtool_wolinfo *wol) +{ + struct sis900_private *sis_priv = netdev_priv(net_dev); + void __iomem *ioaddr = sis_priv->ioaddr; + u32 cfgpmcsr = 0, pmctrl_bits = 0; + + if (wol->wolopts == 0) { + pci_read_config_dword(sis_priv->pci_dev, CFGPMCSR, &cfgpmcsr); + cfgpmcsr &= ~PME_EN; + pci_write_config_dword(sis_priv->pci_dev, CFGPMCSR, cfgpmcsr); + sw32(pmctrl, pmctrl_bits); + if (netif_msg_wol(sis_priv)) + printk(KERN_DEBUG "%s: Wake on LAN disabled\n", net_dev->name); + return 0; + } + + if (wol->wolopts & (WAKE_MAGICSECURE | WAKE_UCAST | WAKE_MCAST + | WAKE_BCAST | WAKE_ARP)) + return -EINVAL; + + if (wol->wolopts & WAKE_MAGIC) + pmctrl_bits |= MAGICPKT; + if (wol->wolopts & WAKE_PHY) + pmctrl_bits |= LINKON; + + sw32(pmctrl, pmctrl_bits); + + pci_read_config_dword(sis_priv->pci_dev, CFGPMCSR, &cfgpmcsr); + cfgpmcsr |= PME_EN; + pci_write_config_dword(sis_priv->pci_dev, CFGPMCSR, cfgpmcsr); + if (netif_msg_wol(sis_priv)) + printk(KERN_DEBUG "%s: Wake on LAN enabled\n", net_dev->name); + + return 0; +} + +static void sis900_get_wol(struct net_device *net_dev, struct ethtool_wolinfo *wol) +{ + struct sis900_private *sp = netdev_priv(net_dev); + void __iomem *ioaddr = sp->ioaddr; + u32 pmctrl_bits; + + pmctrl_bits = sr32(pmctrl); + if (pmctrl_bits & MAGICPKT) + wol->wolopts |= WAKE_MAGIC; + if (pmctrl_bits & LINKON) + wol->wolopts |= WAKE_PHY; + + wol->supported = (WAKE_PHY | WAKE_MAGIC); +} + +static int sis900_get_eeprom_len(struct net_device *dev) +{ + struct sis900_private *sis_priv = netdev_priv(dev); + + return sis_priv->eeprom_size; +} + +static int sis900_read_eeprom(struct net_device *net_dev, u8 *buf) +{ + struct sis900_private *sis_priv = netdev_priv(net_dev); + void __iomem *ioaddr = sis_priv->ioaddr; + int wait, ret = -EAGAIN; + u16 signature; + u16 *ebuf = (u16 *)buf; + int i; + + if (sis_priv->chipset_rev == SIS96x_900_REV) { + sw32(mear, EEREQ); + for (wait = 0; wait < 2000; wait++) { + if (sr32(mear) & EEGNT) { + /* read 16 bits, and index by 16 bits */ + for (i = 0; i < sis_priv->eeprom_size / 2; i++) + ebuf[i] = (u16)read_eeprom(ioaddr, i); + ret = 0; + break; + } + udelay(1); + } + sw32(mear, EEDONE); + } else { + signature = (u16)read_eeprom(ioaddr, EEPROMSignature); + if (signature != 0xffff && signature != 0x0000) { + /* read 16 bits, and index by 16 bits */ + for (i = 0; i < sis_priv->eeprom_size / 2; i++) + ebuf[i] = (u16)read_eeprom(ioaddr, i); + ret = 0; + } + } + return ret; +} + +#define SIS900_EEPROM_MAGIC 0xBABE +static int sis900_get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, u8 *data) +{ + struct sis900_private *sis_priv = netdev_priv(dev); + u8 *eebuf; + int res; + + eebuf = kmalloc(sis_priv->eeprom_size, GFP_KERNEL); + if (!eebuf) + return -ENOMEM; + + eeprom->magic = SIS900_EEPROM_MAGIC; + spin_lock_irq(&sis_priv->lock); + res = sis900_read_eeprom(dev, eebuf); + spin_unlock_irq(&sis_priv->lock); + if (!res) + memcpy(data, eebuf + eeprom->offset, eeprom->len); + kfree(eebuf); + return res; +} + +static const struct ethtool_ops sis900_ethtool_ops = { + .get_drvinfo = sis900_get_drvinfo, + .get_msglevel = sis900_get_msglevel, + .set_msglevel = sis900_set_msglevel, + .get_link = sis900_get_link, + .nway_reset = sis900_nway_reset, + .get_wol = sis900_get_wol, + .set_wol = sis900_set_wol, + .get_link_ksettings = sis900_get_link_ksettings, + .set_link_ksettings = sis900_set_link_ksettings, + .get_eeprom_len = sis900_get_eeprom_len, + .get_eeprom = sis900_get_eeprom, +}; + +/** + * mii_ioctl - process MII i/o control command + * @net_dev: the net device to command for + * @rq: parameter for command + * @cmd: the i/o command + * + * Process MII command like read/write MII register + */ + +static int mii_ioctl(struct net_device *net_dev, struct ifreq *rq, int cmd) +{ + struct sis900_private *sis_priv = netdev_priv(net_dev); + struct mii_ioctl_data *data = if_mii(rq); + + switch(cmd) { + case SIOCGMIIPHY: /* Get address of MII PHY in use. */ + data->phy_id = sis_priv->mii->phy_addr; + fallthrough; + + case SIOCGMIIREG: /* Read MII PHY register. */ + data->val_out = mdio_read(net_dev, data->phy_id & 0x1f, data->reg_num & 0x1f); + return 0; + + case SIOCSMIIREG: /* Write MII PHY register. */ + mdio_write(net_dev, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in); + return 0; + default: + return -EOPNOTSUPP; + } +} + +/** + * sis900_set_config - Set media type by net_device.set_config + * @dev: the net device for media type change + * @map: ifmap passed by ifconfig + * + * Set media type to 10baseT, 100baseT or 0(for auto) by ifconfig + * we support only port changes. All other runtime configuration + * changes will be ignored + */ + +static int sis900_set_config(struct net_device *dev, struct ifmap *map) +{ + struct sis900_private *sis_priv = netdev_priv(dev); + struct mii_phy *mii_phy = sis_priv->mii; + + u16 status; + + if ((map->port != (u_char)(-1)) && (map->port != dev->if_port)) { + /* we switch on the ifmap->port field. I couldn't find anything + * like a definition or standard for the values of that field. + * I think the meaning of those values is device specific. But + * since I would like to change the media type via the ifconfig + * command I use the definition from linux/netdevice.h + * (which seems to be different from the ifport(pcmcia) definition) */ + switch(map->port){ + case IF_PORT_UNKNOWN: /* use auto here */ + dev->if_port = map->port; + /* we are going to change the media type, so the Link + * will be temporary down and we need to reflect that + * here. When the Link comes up again, it will be + * sensed by the sis_timer procedure, which also does + * all the rest for us */ + netif_carrier_off(dev); + + /* read current state */ + status = mdio_read(dev, mii_phy->phy_addr, MII_CONTROL); + + /* enable auto negotiation and reset the negotioation + * (I don't really know what the auto negatiotiation + * reset really means, but it sounds for me right to + * do one here) */ + mdio_write(dev, mii_phy->phy_addr, + MII_CONTROL, status | MII_CNTL_AUTO | MII_CNTL_RST_AUTO); + + break; + + case IF_PORT_10BASET: /* 10BaseT */ + dev->if_port = map->port; + + /* we are going to change the media type, so the Link + * will be temporary down and we need to reflect that + * here. When the Link comes up again, it will be + * sensed by the sis_timer procedure, which also does + * all the rest for us */ + netif_carrier_off(dev); + + /* set Speed to 10Mbps */ + /* read current state */ + status = mdio_read(dev, mii_phy->phy_addr, MII_CONTROL); + + /* disable auto negotiation and force 10MBit mode*/ + mdio_write(dev, mii_phy->phy_addr, + MII_CONTROL, status & ~(MII_CNTL_SPEED | + MII_CNTL_AUTO)); + break; + + case IF_PORT_100BASET: /* 100BaseT */ + case IF_PORT_100BASETX: /* 100BaseTx */ + dev->if_port = map->port; + + /* we are going to change the media type, so the Link + * will be temporary down and we need to reflect that + * here. When the Link comes up again, it will be + * sensed by the sis_timer procedure, which also does + * all the rest for us */ + netif_carrier_off(dev); + + /* set Speed to 100Mbps */ + /* disable auto negotiation and enable 100MBit Mode */ + status = mdio_read(dev, mii_phy->phy_addr, MII_CONTROL); + mdio_write(dev, mii_phy->phy_addr, + MII_CONTROL, (status & ~MII_CNTL_SPEED) | + MII_CNTL_SPEED); + + break; + + case IF_PORT_10BASE2: /* 10Base2 */ + case IF_PORT_AUI: /* AUI */ + case IF_PORT_100BASEFX: /* 100BaseFx */ + /* These Modes are not supported (are they?)*/ + return -EOPNOTSUPP; + + default: + return -EINVAL; + } + } + return 0; +} + +/** + * sis900_mcast_bitnr - compute hashtable index + * @addr: multicast address + * @revision: revision id of chip + * + * SiS 900 uses the most sigificant 7 bits to index a 128 bits multicast + * hash table, which makes this function a little bit different from other drivers + * SiS 900 B0 & 635 M/B uses the most significat 8 bits to index 256 bits + * multicast hash table. + */ + +static inline u16 sis900_mcast_bitnr(u8 *addr, u8 revision) +{ + + u32 crc = ether_crc(6, addr); + + /* leave 8 or 7 most siginifant bits */ + if ((revision >= SIS635A_900_REV) || (revision == SIS900B_900_REV)) + return (int)(crc >> 24); + else + return (int)(crc >> 25); +} + +/** + * set_rx_mode - Set SiS900 receive mode + * @net_dev: the net device to be set + * + * Set SiS900 receive mode for promiscuous, multicast, or broadcast mode. + * And set the appropriate multicast filter. + * Multicast hash table changes from 128 to 256 bits for 635M/B & 900B0. + */ + +static void set_rx_mode(struct net_device *net_dev) +{ + struct sis900_private *sis_priv = netdev_priv(net_dev); + void __iomem *ioaddr = sis_priv->ioaddr; + u16 mc_filter[16] = {0}; /* 256/128 bits multicast hash table */ + int i, table_entries; + u32 rx_mode; + + /* 635 Hash Table entries = 256(2^16) */ + if((sis_priv->chipset_rev >= SIS635A_900_REV) || + (sis_priv->chipset_rev == SIS900B_900_REV)) + table_entries = 16; + else + table_entries = 8; + + if (net_dev->flags & IFF_PROMISC) { + /* Accept any kinds of packets */ + rx_mode = RFPromiscuous; + for (i = 0; i < table_entries; i++) + mc_filter[i] = 0xffff; + } else if ((netdev_mc_count(net_dev) > multicast_filter_limit) || + (net_dev->flags & IFF_ALLMULTI)) { + /* too many multicast addresses or accept all multicast packet */ + rx_mode = RFAAB | RFAAM; + for (i = 0; i < table_entries; i++) + mc_filter[i] = 0xffff; + } else { + /* Accept Broadcast packet, destination address matchs our + * MAC address, use Receive Filter to reject unwanted MCAST + * packets */ + struct netdev_hw_addr *ha; + rx_mode = RFAAB; + + netdev_for_each_mc_addr(ha, net_dev) { + unsigned int bit_nr; + + bit_nr = sis900_mcast_bitnr(ha->addr, + sis_priv->chipset_rev); + mc_filter[bit_nr >> 4] |= (1 << (bit_nr & 0xf)); + } + } + + /* update Multicast Hash Table in Receive Filter */ + for (i = 0; i < table_entries; i++) { + /* why plus 0x04 ??, That makes the correct value for hash table. */ + sw32(rfcr, (u32)(0x00000004 + i) << RFADDR_shift); + sw32(rfdr, mc_filter[i]); + } + + sw32(rfcr, RFEN | rx_mode); + + /* sis900 is capable of looping back packets at MAC level for + * debugging purpose */ + if (net_dev->flags & IFF_LOOPBACK) { + u32 cr_saved; + /* We must disable Tx/Rx before setting loopback mode */ + cr_saved = sr32(cr); + sw32(cr, cr_saved | TxDIS | RxDIS); + /* enable loopback */ + sw32(txcfg, sr32(txcfg) | TxMLB); + sw32(rxcfg, sr32(rxcfg) | RxATX); + /* restore cr */ + sw32(cr, cr_saved); + } +} + +/** + * sis900_reset - Reset sis900 MAC + * @net_dev: the net device to reset + * + * reset sis900 MAC and wait until finished + * reset through command register + * change backoff algorithm for 900B0 & 635 M/B + */ + +static void sis900_reset(struct net_device *net_dev) +{ + struct sis900_private *sis_priv = netdev_priv(net_dev); + void __iomem *ioaddr = sis_priv->ioaddr; + u32 status = TxRCMP | RxRCMP; + int i; + + sw32(ier, 0); + sw32(imr, 0); + sw32(rfcr, 0); + + sw32(cr, RxRESET | TxRESET | RESET | sr32(cr)); + + /* Check that the chip has finished the reset. */ + for (i = 0; status && (i < 1000); i++) + status ^= sr32(isr) & status; + + if (sis_priv->chipset_rev >= SIS635A_900_REV || + sis_priv->chipset_rev == SIS900B_900_REV) + sw32(cfg, PESEL | RND_CNT); + else + sw32(cfg, PESEL); +} + +/** + * sis900_remove - Remove sis900 device + * @pci_dev: the pci device to be removed + * + * remove and release SiS900 net device + */ + +static void sis900_remove(struct pci_dev *pci_dev) +{ + struct net_device *net_dev = pci_get_drvdata(pci_dev); + struct sis900_private *sis_priv = netdev_priv(net_dev); + + unregister_netdev(net_dev); + + while (sis_priv->first_mii) { + struct mii_phy *phy = sis_priv->first_mii; + + sis_priv->first_mii = phy->next; + kfree(phy); + } + + dma_free_coherent(&pci_dev->dev, RX_TOTAL_SIZE, sis_priv->rx_ring, + sis_priv->rx_ring_dma); + dma_free_coherent(&pci_dev->dev, TX_TOTAL_SIZE, sis_priv->tx_ring, + sis_priv->tx_ring_dma); + pci_iounmap(pci_dev, sis_priv->ioaddr); + free_netdev(net_dev); +} + +static int __maybe_unused sis900_suspend(struct device *dev) +{ + struct net_device *net_dev = dev_get_drvdata(dev); + struct sis900_private *sis_priv = netdev_priv(net_dev); + void __iomem *ioaddr = sis_priv->ioaddr; + + if(!netif_running(net_dev)) + return 0; + + netif_stop_queue(net_dev); + netif_device_detach(net_dev); + + /* Stop the chip's Tx and Rx Status Machine */ + sw32(cr, RxDIS | TxDIS | sr32(cr)); + + return 0; +} + +static int __maybe_unused sis900_resume(struct device *dev) +{ + struct net_device *net_dev = dev_get_drvdata(dev); + struct sis900_private *sis_priv = netdev_priv(net_dev); + void __iomem *ioaddr = sis_priv->ioaddr; + + if(!netif_running(net_dev)) + return 0; + + sis900_init_rxfilter(net_dev); + + sis900_init_tx_ring(net_dev); + sis900_init_rx_ring(net_dev); + + set_rx_mode(net_dev); + + netif_device_attach(net_dev); + netif_start_queue(net_dev); + + /* Workaround for EDB */ + sis900_set_mode(sis_priv, HW_SPEED_10_MBPS, FDX_CAPABLE_HALF_SELECTED); + + /* Enable all known interrupts by setting the interrupt mask. */ + sw32(imr, RxSOVR | RxORN | RxERR | RxOK | TxURN | TxERR | TxDESC); + sw32(cr, RxENA | sr32(cr)); + sw32(ier, IE); + + sis900_check_mode(net_dev, sis_priv->mii); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(sis900_pm_ops, sis900_suspend, sis900_resume); + +static struct pci_driver sis900_pci_driver = { + .name = SIS900_MODULE_NAME, + .id_table = sis900_pci_tbl, + .probe = sis900_probe, + .remove = sis900_remove, + .driver.pm = &sis900_pm_ops, +}; + +static int __init sis900_init_module(void) +{ +/* when a module, this is printed whether or not devices are found in probe */ +#ifdef MODULE + printk(version); +#endif + + return pci_register_driver(&sis900_pci_driver); +} + +static void __exit sis900_cleanup_module(void) +{ + pci_unregister_driver(&sis900_pci_driver); +} + +module_init(sis900_init_module); +module_exit(sis900_cleanup_module); + -- cgit v1.2.3