From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/net/mdio/mdio-mux-bcm-iproc.c | 320 ++++++++++++++++++++++++++++++++++ 1 file changed, 320 insertions(+) create mode 100644 drivers/net/mdio/mdio-mux-bcm-iproc.c (limited to 'drivers/net/mdio/mdio-mux-bcm-iproc.c') diff --git a/drivers/net/mdio/mdio-mux-bcm-iproc.c b/drivers/net/mdio/mdio-mux-bcm-iproc.c new file mode 100644 index 000000000..014c0baed --- /dev/null +++ b/drivers/net/mdio/mdio-mux-bcm-iproc.c @@ -0,0 +1,320 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2016 Broadcom + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MDIO_RATE_ADJ_EXT_OFFSET 0x000 +#define MDIO_RATE_ADJ_INT_OFFSET 0x004 +#define MDIO_RATE_ADJ_DIVIDENT_SHIFT 16 + +#define MDIO_SCAN_CTRL_OFFSET 0x008 +#define MDIO_SCAN_CTRL_OVRIDE_EXT_MSTR 28 + +#define MDIO_PARAM_OFFSET 0x23c +#define MDIO_PARAM_MIIM_CYCLE 29 +#define MDIO_PARAM_INTERNAL_SEL 25 +#define MDIO_PARAM_BUS_ID 22 +#define MDIO_PARAM_C45_SEL 21 +#define MDIO_PARAM_PHY_ID 16 +#define MDIO_PARAM_PHY_DATA 0 + +#define MDIO_READ_OFFSET 0x240 +#define MDIO_READ_DATA_MASK 0xffff +#define MDIO_ADDR_OFFSET 0x244 + +#define MDIO_CTRL_OFFSET 0x248 +#define MDIO_CTRL_WRITE_OP 0x1 +#define MDIO_CTRL_READ_OP 0x2 + +#define MDIO_STAT_OFFSET 0x24c +#define MDIO_STAT_DONE 1 + +#define BUS_MAX_ADDR 32 +#define EXT_BUS_START_ADDR 16 + +#define MDIO_REG_ADDR_SPACE_SIZE 0x250 + +#define MDIO_OPERATING_FREQUENCY 11000000 +#define MDIO_RATE_ADJ_DIVIDENT 1 + +struct iproc_mdiomux_desc { + void *mux_handle; + void __iomem *base; + struct device *dev; + struct mii_bus *mii_bus; + struct clk *core_clk; +}; + +static void mdio_mux_iproc_config(struct iproc_mdiomux_desc *md) +{ + u32 divisor; + u32 val; + + /* Disable external mdio master access */ + val = readl(md->base + MDIO_SCAN_CTRL_OFFSET); + val |= BIT(MDIO_SCAN_CTRL_OVRIDE_EXT_MSTR); + writel(val, md->base + MDIO_SCAN_CTRL_OFFSET); + + if (md->core_clk) { + /* use rate adjust regs to derive the mdio's operating + * frequency from the specified core clock + */ + divisor = clk_get_rate(md->core_clk) / MDIO_OPERATING_FREQUENCY; + divisor = divisor / (MDIO_RATE_ADJ_DIVIDENT + 1); + val = divisor; + val |= MDIO_RATE_ADJ_DIVIDENT << MDIO_RATE_ADJ_DIVIDENT_SHIFT; + writel(val, md->base + MDIO_RATE_ADJ_EXT_OFFSET); + writel(val, md->base + MDIO_RATE_ADJ_INT_OFFSET); + } +} + +static int iproc_mdio_wait_for_idle(void __iomem *base, bool result) +{ + u32 val; + + return readl_poll_timeout(base + MDIO_STAT_OFFSET, val, + (val & MDIO_STAT_DONE) == result, + 2000, 1000000); +} + +/* start_miim_ops- Program and start MDIO transaction over mdio bus. + * @base: Base address + * @phyid: phyid of the selected bus. + * @reg: register offset to be read/written. + * @val :0 if read op else value to be written in @reg; + * @op: Operation that need to be carried out. + * MDIO_CTRL_READ_OP: Read transaction. + * MDIO_CTRL_WRITE_OP: Write transaction. + * + * Return value: Successful Read operation returns read reg values and write + * operation returns 0. Failure operation returns negative error code. + */ +static int start_miim_ops(void __iomem *base, + u16 phyid, u32 reg, u16 val, u32 op) +{ + u32 param; + int ret; + + writel(0, base + MDIO_CTRL_OFFSET); + ret = iproc_mdio_wait_for_idle(base, 0); + if (ret) + goto err; + + param = readl(base + MDIO_PARAM_OFFSET); + param |= phyid << MDIO_PARAM_PHY_ID; + param |= val << MDIO_PARAM_PHY_DATA; + if (reg & MII_ADDR_C45) + param |= BIT(MDIO_PARAM_C45_SEL); + + writel(param, base + MDIO_PARAM_OFFSET); + + writel(reg, base + MDIO_ADDR_OFFSET); + + writel(op, base + MDIO_CTRL_OFFSET); + + ret = iproc_mdio_wait_for_idle(base, 1); + if (ret) + goto err; + + if (op == MDIO_CTRL_READ_OP) + ret = readl(base + MDIO_READ_OFFSET) & MDIO_READ_DATA_MASK; +err: + return ret; +} + +static int iproc_mdiomux_read(struct mii_bus *bus, int phyid, int reg) +{ + struct iproc_mdiomux_desc *md = bus->priv; + int ret; + + ret = start_miim_ops(md->base, phyid, reg, 0, MDIO_CTRL_READ_OP); + if (ret < 0) + dev_err(&bus->dev, "mdiomux read operation failed!!!"); + + return ret; +} + +static int iproc_mdiomux_write(struct mii_bus *bus, + int phyid, int reg, u16 val) +{ + struct iproc_mdiomux_desc *md = bus->priv; + int ret; + + /* Write val at reg offset */ + ret = start_miim_ops(md->base, phyid, reg, val, MDIO_CTRL_WRITE_OP); + if (ret < 0) + dev_err(&bus->dev, "mdiomux write operation failed!!!"); + + return ret; +} + +static int mdio_mux_iproc_switch_fn(int current_child, int desired_child, + void *data) +{ + struct iproc_mdiomux_desc *md = data; + u32 param, bus_id; + bool bus_dir; + + /* select bus and its properties */ + bus_dir = (desired_child < EXT_BUS_START_ADDR); + bus_id = bus_dir ? desired_child : (desired_child - EXT_BUS_START_ADDR); + + param = (bus_dir ? 1 : 0) << MDIO_PARAM_INTERNAL_SEL; + param |= (bus_id << MDIO_PARAM_BUS_ID); + + writel(param, md->base + MDIO_PARAM_OFFSET); + return 0; +} + +static int mdio_mux_iproc_probe(struct platform_device *pdev) +{ + struct iproc_mdiomux_desc *md; + struct mii_bus *bus; + struct resource *res; + int rc; + + md = devm_kzalloc(&pdev->dev, sizeof(*md), GFP_KERNEL); + if (!md) + return -ENOMEM; + md->dev = &pdev->dev; + + md->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res); + if (IS_ERR(md->base)) + return PTR_ERR(md->base); + if (res->start & 0xfff) { + /* For backward compatibility in case the + * base address is specified with an offset. + */ + dev_info(&pdev->dev, "fix base address in dt-blob\n"); + res->start &= ~0xfff; + res->end = res->start + MDIO_REG_ADDR_SPACE_SIZE - 1; + } + + md->mii_bus = devm_mdiobus_alloc(&pdev->dev); + if (!md->mii_bus) { + dev_err(&pdev->dev, "mdiomux bus alloc failed\n"); + return -ENOMEM; + } + + md->core_clk = devm_clk_get(&pdev->dev, NULL); + if (md->core_clk == ERR_PTR(-ENOENT) || + md->core_clk == ERR_PTR(-EINVAL)) + md->core_clk = NULL; + else if (IS_ERR(md->core_clk)) + return PTR_ERR(md->core_clk); + + rc = clk_prepare_enable(md->core_clk); + if (rc) { + dev_err(&pdev->dev, "failed to enable core clk\n"); + return rc; + } + + bus = md->mii_bus; + bus->priv = md; + bus->name = "iProc MDIO mux bus"; + snprintf(bus->id, MII_BUS_ID_SIZE, "%s-%d", pdev->name, pdev->id); + bus->parent = &pdev->dev; + bus->read = iproc_mdiomux_read; + bus->write = iproc_mdiomux_write; + + bus->phy_mask = ~0; + bus->dev.of_node = pdev->dev.of_node; + rc = mdiobus_register(bus); + if (rc) { + dev_err(&pdev->dev, "mdiomux registration failed\n"); + goto out_clk; + } + + platform_set_drvdata(pdev, md); + + rc = mdio_mux_init(md->dev, md->dev->of_node, mdio_mux_iproc_switch_fn, + &md->mux_handle, md, md->mii_bus); + if (rc) { + dev_info(md->dev, "mdiomux initialization failed\n"); + goto out_register; + } + + mdio_mux_iproc_config(md); + + dev_info(md->dev, "iProc mdiomux registered\n"); + return 0; + +out_register: + mdiobus_unregister(bus); +out_clk: + clk_disable_unprepare(md->core_clk); + return rc; +} + +static int mdio_mux_iproc_remove(struct platform_device *pdev) +{ + struct iproc_mdiomux_desc *md = platform_get_drvdata(pdev); + + mdio_mux_uninit(md->mux_handle); + mdiobus_unregister(md->mii_bus); + clk_disable_unprepare(md->core_clk); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int mdio_mux_iproc_suspend(struct device *dev) +{ + struct iproc_mdiomux_desc *md = dev_get_drvdata(dev); + + clk_disable_unprepare(md->core_clk); + + return 0; +} + +static int mdio_mux_iproc_resume(struct device *dev) +{ + struct iproc_mdiomux_desc *md = dev_get_drvdata(dev); + int rc; + + rc = clk_prepare_enable(md->core_clk); + if (rc) { + dev_err(md->dev, "failed to enable core clk\n"); + return rc; + } + mdio_mux_iproc_config(md); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(mdio_mux_iproc_pm_ops, + mdio_mux_iproc_suspend, mdio_mux_iproc_resume); + +static const struct of_device_id mdio_mux_iproc_match[] = { + { + .compatible = "brcm,mdio-mux-iproc", + }, + {}, +}; +MODULE_DEVICE_TABLE(of, mdio_mux_iproc_match); + +static struct platform_driver mdiomux_iproc_driver = { + .driver = { + .name = "mdio-mux-iproc", + .of_match_table = mdio_mux_iproc_match, + .pm = &mdio_mux_iproc_pm_ops, + }, + .probe = mdio_mux_iproc_probe, + .remove = mdio_mux_iproc_remove, +}; + +module_platform_driver(mdiomux_iproc_driver); + +MODULE_DESCRIPTION("iProc MDIO Mux Bus Driver"); +MODULE_AUTHOR("Pramod Kumar "); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3