From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/net/wireless/ath/ath9k/calib.c | 487 +++++++++++++++++++++++++++++++++ 1 file changed, 487 insertions(+) create mode 100644 drivers/net/wireless/ath/ath9k/calib.c (limited to 'drivers/net/wireless/ath/ath9k/calib.c') diff --git a/drivers/net/wireless/ath/ath9k/calib.c b/drivers/net/wireless/ath/ath9k/calib.c new file mode 100644 index 000000000..0422a3339 --- /dev/null +++ b/drivers/net/wireless/ath/ath9k/calib.c @@ -0,0 +1,487 @@ +/* + * Copyright (c) 2008-2011 Atheros Communications Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include "hw.h" +#include "hw-ops.h" +#include + +/* Common calibration code */ + + +static int16_t ath9k_hw_get_nf_hist_mid(int16_t *nfCalBuffer) +{ + int16_t nfval; + int16_t sort[ATH9K_NF_CAL_HIST_MAX]; + int i, j; + + for (i = 0; i < ATH9K_NF_CAL_HIST_MAX; i++) + sort[i] = nfCalBuffer[i]; + + for (i = 0; i < ATH9K_NF_CAL_HIST_MAX - 1; i++) { + for (j = 1; j < ATH9K_NF_CAL_HIST_MAX - i; j++) { + if (sort[j] > sort[j - 1]) { + nfval = sort[j]; + sort[j] = sort[j - 1]; + sort[j - 1] = nfval; + } + } + } + nfval = sort[(ATH9K_NF_CAL_HIST_MAX - 1) >> 1]; + + return nfval; +} + +static struct ath_nf_limits *ath9k_hw_get_nf_limits(struct ath_hw *ah, + struct ath9k_channel *chan) +{ + struct ath_nf_limits *limit; + + if (!chan || IS_CHAN_2GHZ(chan)) + limit = &ah->nf_2g; + else + limit = &ah->nf_5g; + + return limit; +} + +static s16 ath9k_hw_get_default_nf(struct ath_hw *ah, + struct ath9k_channel *chan, + int chain) +{ + s16 calib_nf = ath9k_hw_get_nf_limits(ah, chan)->cal[chain]; + + if (calib_nf) + return calib_nf; + else + return ath9k_hw_get_nf_limits(ah, chan)->nominal; +} + +s16 ath9k_hw_getchan_noise(struct ath_hw *ah, struct ath9k_channel *chan, + s16 nf) +{ + s8 noise = ATH_DEFAULT_NOISE_FLOOR; + + if (nf) { + s8 delta = nf - ATH9K_NF_CAL_NOISE_THRESH - + ath9k_hw_get_default_nf(ah, chan, 0); + if (delta > 0) + noise += delta; + } + return noise; +} +EXPORT_SYMBOL(ath9k_hw_getchan_noise); + +static void ath9k_hw_update_nfcal_hist_buffer(struct ath_hw *ah, + struct ath9k_hw_cal_data *cal, + int16_t *nfarray) +{ + struct ath_common *common = ath9k_hw_common(ah); + struct ath_nf_limits *limit; + struct ath9k_nfcal_hist *h; + bool high_nf_mid = false; + u8 chainmask = (ah->rxchainmask << 3) | ah->rxchainmask; + int i; + + h = cal->nfCalHist; + limit = ath9k_hw_get_nf_limits(ah, ah->curchan); + + for (i = 0; i < NUM_NF_READINGS; i++) { + if (!(chainmask & (1 << i)) || + ((i >= AR5416_MAX_CHAINS) && !IS_CHAN_HT40(ah->curchan))) + continue; + + h[i].nfCalBuffer[h[i].currIndex] = nfarray[i]; + + if (++h[i].currIndex >= ATH9K_NF_CAL_HIST_MAX) + h[i].currIndex = 0; + + if (h[i].invalidNFcount > 0) { + h[i].invalidNFcount--; + h[i].privNF = nfarray[i]; + } else { + h[i].privNF = + ath9k_hw_get_nf_hist_mid(h[i].nfCalBuffer); + } + + if (!h[i].privNF) + continue; + + if (h[i].privNF > limit->max) { + high_nf_mid = true; + + ath_dbg(common, CALIBRATE, + "NFmid[%d] (%d) > MAX (%d), %s\n", + i, h[i].privNF, limit->max, + (test_bit(NFCAL_INTF, &cal->cal_flags) ? + "not corrected (due to interference)" : + "correcting to MAX")); + + /* + * Normally we limit the average noise floor by the + * hardware specific maximum here. However if we have + * encountered stuck beacons because of interference, + * we bypass this limit here in order to better deal + * with our environment. + */ + if (!test_bit(NFCAL_INTF, &cal->cal_flags)) + h[i].privNF = limit->max; + } + } + + /* + * If the noise floor seems normal for all chains, assume that + * there is no significant interference in the environment anymore. + * Re-enable the enforcement of the NF maximum again. + */ + if (!high_nf_mid) + clear_bit(NFCAL_INTF, &cal->cal_flags); +} + +static bool ath9k_hw_get_nf_thresh(struct ath_hw *ah, + enum nl80211_band band, + int16_t *nft) +{ + switch (band) { + case NL80211_BAND_5GHZ: + *nft = (int8_t)ah->eep_ops->get_eeprom(ah, EEP_NFTHRESH_5); + break; + case NL80211_BAND_2GHZ: + *nft = (int8_t)ah->eep_ops->get_eeprom(ah, EEP_NFTHRESH_2); + break; + default: + BUG_ON(1); + return false; + } + + return true; +} + +void ath9k_hw_reset_calibration(struct ath_hw *ah, + struct ath9k_cal_list *currCal) +{ + int i; + + ath9k_hw_setup_calibration(ah, currCal); + + ah->cal_start_time = jiffies; + currCal->calState = CAL_RUNNING; + + for (i = 0; i < AR5416_MAX_CHAINS; i++) { + ah->meas0.sign[i] = 0; + ah->meas1.sign[i] = 0; + ah->meas2.sign[i] = 0; + ah->meas3.sign[i] = 0; + } + + ah->cal_samples = 0; +} + +/* This is done for the currently configured channel */ +bool ath9k_hw_reset_calvalid(struct ath_hw *ah) +{ + struct ath_common *common = ath9k_hw_common(ah); + struct ath9k_cal_list *currCal = ah->cal_list_curr; + + if (!ah->caldata) + return true; + + if (!AR_SREV_9100(ah) && !AR_SREV_9160_10_OR_LATER(ah)) + return true; + + if (currCal == NULL) + return true; + + if (currCal->calState != CAL_DONE) { + ath_dbg(common, CALIBRATE, "Calibration state incorrect, %d\n", + currCal->calState); + return true; + } + + currCal = ah->cal_list; + do { + ath_dbg(common, CALIBRATE, "Resetting Cal %d state for channel %u\n", + currCal->calData->calType, + ah->curchan->chan->center_freq); + + ah->caldata->CalValid &= ~currCal->calData->calType; + currCal->calState = CAL_WAITING; + + currCal = currCal->calNext; + } while (currCal != ah->cal_list); + + return false; +} +EXPORT_SYMBOL(ath9k_hw_reset_calvalid); + +void ath9k_hw_start_nfcal(struct ath_hw *ah, bool update) +{ + if (ah->caldata) + set_bit(NFCAL_PENDING, &ah->caldata->cal_flags); + + REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, + AR_PHY_AGC_CONTROL_ENABLE_NF); + + if (update) + REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL, + AR_PHY_AGC_CONTROL_NO_UPDATE_NF); + else + REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, + AR_PHY_AGC_CONTROL_NO_UPDATE_NF); + + REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NF); +} + +int ath9k_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan) +{ + struct ath9k_nfcal_hist *h = NULL; + unsigned i, j; + u8 chainmask = (ah->rxchainmask << 3) | ah->rxchainmask; + struct ath_common *common = ath9k_hw_common(ah); + s16 default_nf = ath9k_hw_get_nf_limits(ah, chan)->nominal; + u32 bb_agc_ctl = REG_READ(ah, AR_PHY_AGC_CONTROL); + + if (ah->caldata) + h = ah->caldata->nfCalHist; + + ENABLE_REG_RMW_BUFFER(ah); + for (i = 0; i < NUM_NF_READINGS; i++) { + if (chainmask & (1 << i)) { + s16 nfval; + + if ((i >= AR5416_MAX_CHAINS) && !IS_CHAN_HT40(chan)) + continue; + + if (ah->nf_override) + nfval = ah->nf_override; + else if (h) + nfval = h[i].privNF; + else { + /* Try to get calibrated noise floor value */ + nfval = + ath9k_hw_get_nf_limits(ah, chan)->cal[i]; + if (nfval > -60 || nfval < -127) + nfval = default_nf; + } + + REG_RMW(ah, ah->nf_regs[i], + (((u32) nfval << 1) & 0x1ff), 0x1ff); + } + } + + /* + * stop NF cal if ongoing to ensure NF load completes immediately + * (or after end rx/tx frame if ongoing) + */ + if (bb_agc_ctl & AR_PHY_AGC_CONTROL_NF) { + REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NF); + REG_RMW_BUFFER_FLUSH(ah); + ENABLE_REG_RMW_BUFFER(ah); + } + + /* + * Load software filtered NF value into baseband internal minCCApwr + * variable. + */ + REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL, + AR_PHY_AGC_CONTROL_ENABLE_NF); + REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL, + AR_PHY_AGC_CONTROL_NO_UPDATE_NF); + REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NF); + REG_RMW_BUFFER_FLUSH(ah); + + /* + * Wait for load to complete, should be fast, a few 10s of us. + * The max delay was changed from an original 250us to 22.2 msec. + * This would increase timeout to the longest possible frame + * (11n max length 22.1 msec) + */ + for (j = 0; j < 22200; j++) { + if ((REG_READ(ah, AR_PHY_AGC_CONTROL) & + AR_PHY_AGC_CONTROL_NF) == 0) + break; + udelay(10); + } + + /* + * Restart NF so it can continue. + */ + if (bb_agc_ctl & AR_PHY_AGC_CONTROL_NF) { + ENABLE_REG_RMW_BUFFER(ah); + if (bb_agc_ctl & AR_PHY_AGC_CONTROL_ENABLE_NF) + REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, + AR_PHY_AGC_CONTROL_ENABLE_NF); + if (bb_agc_ctl & AR_PHY_AGC_CONTROL_NO_UPDATE_NF) + REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, + AR_PHY_AGC_CONTROL_NO_UPDATE_NF); + REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NF); + REG_RMW_BUFFER_FLUSH(ah); + } + + /* + * We timed out waiting for the noisefloor to load, probably due to an + * in-progress rx. Simply return here and allow the load plenty of time + * to complete before the next calibration interval. We need to avoid + * trying to load -50 (which happens below) while the previous load is + * still in progress as this can cause rx deafness. Instead by returning + * here, the baseband nf cal will just be capped by our present + * noisefloor until the next calibration timer. + */ + if (j == 22200) { + ath_dbg(common, ANY, + "Timeout while waiting for nf to load: AR_PHY_AGC_CONTROL=0x%x\n", + REG_READ(ah, AR_PHY_AGC_CONTROL)); + return -ETIMEDOUT; + } + + /* + * Restore maxCCAPower register parameter again so that we're not capped + * by the median we just loaded. This will be initial (and max) value + * of next noise floor calibration the baseband does. + */ + ENABLE_REG_RMW_BUFFER(ah); + for (i = 0; i < NUM_NF_READINGS; i++) { + if (chainmask & (1 << i)) { + if ((i >= AR5416_MAX_CHAINS) && !IS_CHAN_HT40(chan)) + continue; + + REG_RMW(ah, ah->nf_regs[i], + (((u32) (-50) << 1) & 0x1ff), 0x1ff); + } + } + REG_RMW_BUFFER_FLUSH(ah); + + return 0; +} +EXPORT_SYMBOL(ath9k_hw_loadnf); + + +static void ath9k_hw_nf_sanitize(struct ath_hw *ah, s16 *nf) +{ + struct ath_common *common = ath9k_hw_common(ah); + struct ath_nf_limits *limit; + int i; + + if (IS_CHAN_2GHZ(ah->curchan)) + limit = &ah->nf_2g; + else + limit = &ah->nf_5g; + + for (i = 0; i < NUM_NF_READINGS; i++) { + if (!nf[i]) + continue; + + ath_dbg(common, CALIBRATE, + "NF calibrated [%s] [chain %d] is %d\n", + (i >= 3 ? "ext" : "ctl"), i % 3, nf[i]); + + if (nf[i] > limit->max) { + ath_dbg(common, CALIBRATE, + "NF[%d] (%d) > MAX (%d), correcting to MAX\n", + i, nf[i], limit->max); + nf[i] = limit->max; + } else if (nf[i] < limit->min) { + ath_dbg(common, CALIBRATE, + "NF[%d] (%d) < MIN (%d), correcting to NOM\n", + i, nf[i], limit->min); + nf[i] = limit->nominal; + } + } +} + +bool ath9k_hw_getnf(struct ath_hw *ah, struct ath9k_channel *chan) +{ + struct ath_common *common = ath9k_hw_common(ah); + int16_t nf, nfThresh; + int16_t nfarray[NUM_NF_READINGS] = { 0 }; + struct ath9k_nfcal_hist *h; + struct ieee80211_channel *c = chan->chan; + struct ath9k_hw_cal_data *caldata = ah->caldata; + + if (REG_READ(ah, AR_PHY_AGC_CONTROL) & AR_PHY_AGC_CONTROL_NF) { + ath_dbg(common, CALIBRATE, + "NF did not complete in calibration window\n"); + return false; + } + + ath9k_hw_do_getnf(ah, nfarray); + ath9k_hw_nf_sanitize(ah, nfarray); + nf = nfarray[0]; + if (ath9k_hw_get_nf_thresh(ah, c->band, &nfThresh) + && nf > nfThresh) { + ath_dbg(common, CALIBRATE, + "noise floor failed detected; detected %d, threshold %d\n", + nf, nfThresh); + } + + if (!caldata) { + chan->noisefloor = nf; + return false; + } + + h = caldata->nfCalHist; + clear_bit(NFCAL_PENDING, &caldata->cal_flags); + ath9k_hw_update_nfcal_hist_buffer(ah, caldata, nfarray); + chan->noisefloor = h[0].privNF; + ah->noise = ath9k_hw_getchan_noise(ah, chan, chan->noisefloor); + return true; +} +EXPORT_SYMBOL(ath9k_hw_getnf); + +void ath9k_init_nfcal_hist_buffer(struct ath_hw *ah, + struct ath9k_channel *chan) +{ + struct ath9k_nfcal_hist *h; + int i, j, k = 0; + + ah->caldata->channel = chan->channel; + ah->caldata->channelFlags = chan->channelFlags; + h = ah->caldata->nfCalHist; + for (i = 0; i < NUM_NF_READINGS; i++) { + h[i].currIndex = 0; + h[i].privNF = ath9k_hw_get_default_nf(ah, chan, k); + h[i].invalidNFcount = AR_PHY_CCA_FILTERWINDOW_LENGTH; + for (j = 0; j < ATH9K_NF_CAL_HIST_MAX; j++) + h[i].nfCalBuffer[j] = h[i].privNF; + if (++k >= AR5416_MAX_CHAINS) + k = 0; + } +} + + +void ath9k_hw_bstuck_nfcal(struct ath_hw *ah) +{ + struct ath9k_hw_cal_data *caldata = ah->caldata; + + if (unlikely(!caldata)) + return; + + /* + * If beacons are stuck, the most likely cause is interference. + * Triggering a noise floor calibration at this point helps the + * hardware adapt to a noisy environment much faster. + * To ensure that we recover from stuck beacons quickly, let + * the baseband update the internal NF value itself, similar to + * what is being done after a full reset. + */ + if (!test_bit(NFCAL_PENDING, &caldata->cal_flags)) + ath9k_hw_start_nfcal(ah, true); + else if (!(REG_READ(ah, AR_PHY_AGC_CONTROL) & AR_PHY_AGC_CONTROL_NF)) + ath9k_hw_getnf(ah, ah->curchan); + + set_bit(NFCAL_INTF, &caldata->cal_flags); +} +EXPORT_SYMBOL(ath9k_hw_bstuck_nfcal); + -- cgit v1.2.3