From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/net/wireless/intel/iwlegacy/4965.c | 1935 ++++++++++++++++++++++++++++ 1 file changed, 1935 insertions(+) create mode 100644 drivers/net/wireless/intel/iwlegacy/4965.c (limited to 'drivers/net/wireless/intel/iwlegacy/4965.c') diff --git a/drivers/net/wireless/intel/iwlegacy/4965.c b/drivers/net/wireless/intel/iwlegacy/4965.c new file mode 100644 index 000000000..c34729f57 --- /dev/null +++ b/drivers/net/wireless/intel/iwlegacy/4965.c @@ -0,0 +1,1935 @@ +// SPDX-License-Identifier: GPL-2.0-only +/****************************************************************************** + * + * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved. + * + * Contact Information: + * Intel Linux Wireless + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + *****************************************************************************/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "common.h" +#include "4965.h" + +/* + * il_verify_inst_sparse - verify runtime uCode image in card vs. host, + * using sample data 100 bytes apart. If these sample points are good, + * it's a pretty good bet that everything between them is good, too. + */ +static int +il4965_verify_inst_sparse(struct il_priv *il, __le32 * image, u32 len) +{ + u32 val; + int ret = 0; + u32 errcnt = 0; + u32 i; + + D_INFO("ucode inst image size is %u\n", len); + + for (i = 0; i < len; i += 100, image += 100 / sizeof(u32)) { + /* read data comes through single port, auto-incr addr */ + /* NOTE: Use the debugless read so we don't flood kernel log + * if IL_DL_IO is set */ + il_wr(il, HBUS_TARG_MEM_RADDR, i + IL4965_RTC_INST_LOWER_BOUND); + val = _il_rd(il, HBUS_TARG_MEM_RDAT); + if (val != le32_to_cpu(*image)) { + ret = -EIO; + errcnt++; + if (errcnt >= 3) + break; + } + } + + return ret; +} + +/* + * il4965_verify_inst_full - verify runtime uCode image in card vs. host, + * looking at all data. + */ +static int +il4965_verify_inst_full(struct il_priv *il, __le32 * image, u32 len) +{ + u32 val; + u32 save_len = len; + int ret = 0; + u32 errcnt; + + D_INFO("ucode inst image size is %u\n", len); + + il_wr(il, HBUS_TARG_MEM_RADDR, IL4965_RTC_INST_LOWER_BOUND); + + errcnt = 0; + for (; len > 0; len -= sizeof(u32), image++) { + /* read data comes through single port, auto-incr addr */ + /* NOTE: Use the debugless read so we don't flood kernel log + * if IL_DL_IO is set */ + val = _il_rd(il, HBUS_TARG_MEM_RDAT); + if (val != le32_to_cpu(*image)) { + IL_ERR("uCode INST section is invalid at " + "offset 0x%x, is 0x%x, s/b 0x%x\n", + save_len - len, val, le32_to_cpu(*image)); + ret = -EIO; + errcnt++; + if (errcnt >= 20) + break; + } + } + + if (!errcnt) + D_INFO("ucode image in INSTRUCTION memory is good\n"); + + return ret; +} + +/* + * il4965_verify_ucode - determine which instruction image is in SRAM, + * and verify its contents + */ +int +il4965_verify_ucode(struct il_priv *il) +{ + __le32 *image; + u32 len; + int ret; + + /* Try bootstrap */ + image = (__le32 *) il->ucode_boot.v_addr; + len = il->ucode_boot.len; + ret = il4965_verify_inst_sparse(il, image, len); + if (!ret) { + D_INFO("Bootstrap uCode is good in inst SRAM\n"); + return 0; + } + + /* Try initialize */ + image = (__le32 *) il->ucode_init.v_addr; + len = il->ucode_init.len; + ret = il4965_verify_inst_sparse(il, image, len); + if (!ret) { + D_INFO("Initialize uCode is good in inst SRAM\n"); + return 0; + } + + /* Try runtime/protocol */ + image = (__le32 *) il->ucode_code.v_addr; + len = il->ucode_code.len; + ret = il4965_verify_inst_sparse(il, image, len); + if (!ret) { + D_INFO("Runtime uCode is good in inst SRAM\n"); + return 0; + } + + IL_ERR("NO VALID UCODE IMAGE IN INSTRUCTION SRAM!!\n"); + + /* Since nothing seems to match, show first several data entries in + * instruction SRAM, so maybe visual inspection will give a clue. + * Selection of bootstrap image (vs. other images) is arbitrary. */ + image = (__le32 *) il->ucode_boot.v_addr; + len = il->ucode_boot.len; + ret = il4965_verify_inst_full(il, image, len); + + return ret; +} + +/****************************************************************************** + * + * EEPROM related functions + * +******************************************************************************/ + +/* + * The device's EEPROM semaphore prevents conflicts between driver and uCode + * when accessing the EEPROM; each access is a series of pulses to/from the + * EEPROM chip, not a single event, so even reads could conflict if they + * weren't arbitrated by the semaphore. + */ +int +il4965_eeprom_acquire_semaphore(struct il_priv *il) +{ + u16 count; + int ret; + + for (count = 0; count < EEPROM_SEM_RETRY_LIMIT; count++) { + /* Request semaphore */ + il_set_bit(il, CSR_HW_IF_CONFIG_REG, + CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM); + + /* See if we got it */ + ret = + _il_poll_bit(il, CSR_HW_IF_CONFIG_REG, + CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM, + CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM, + EEPROM_SEM_TIMEOUT); + if (ret >= 0) + return ret; + } + + return ret; +} + +void +il4965_eeprom_release_semaphore(struct il_priv *il) +{ + il_clear_bit(il, CSR_HW_IF_CONFIG_REG, + CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM); + +} + +int +il4965_eeprom_check_version(struct il_priv *il) +{ + u16 eeprom_ver; + u16 calib_ver; + + eeprom_ver = il_eeprom_query16(il, EEPROM_VERSION); + calib_ver = il_eeprom_query16(il, EEPROM_4965_CALIB_VERSION_OFFSET); + + if (eeprom_ver < il->cfg->eeprom_ver || + calib_ver < il->cfg->eeprom_calib_ver) + goto err; + + IL_INFO("device EEPROM VER=0x%x, CALIB=0x%x\n", eeprom_ver, calib_ver); + + return 0; +err: + IL_ERR("Unsupported (too old) EEPROM VER=0x%x < 0x%x " + "CALIB=0x%x < 0x%x\n", eeprom_ver, il->cfg->eeprom_ver, + calib_ver, il->cfg->eeprom_calib_ver); + return -EINVAL; + +} + +void +il4965_eeprom_get_mac(const struct il_priv *il, u8 * mac) +{ + const u8 *addr = il_eeprom_query_addr(il, + EEPROM_MAC_ADDRESS); + memcpy(mac, addr, ETH_ALEN); +} + +/* Send led command */ +static int +il4965_send_led_cmd(struct il_priv *il, struct il_led_cmd *led_cmd) +{ + struct il_host_cmd cmd = { + .id = C_LEDS, + .len = sizeof(struct il_led_cmd), + .data = led_cmd, + .flags = CMD_ASYNC, + .callback = NULL, + }; + u32 reg; + + reg = _il_rd(il, CSR_LED_REG); + if (reg != (reg & CSR_LED_BSM_CTRL_MSK)) + _il_wr(il, CSR_LED_REG, reg & CSR_LED_BSM_CTRL_MSK); + + return il_send_cmd(il, &cmd); +} + +/* Set led register off */ +void +il4965_led_enable(struct il_priv *il) +{ + _il_wr(il, CSR_LED_REG, CSR_LED_REG_TRUN_ON); +} + +static int il4965_send_tx_power(struct il_priv *il); +static int il4965_hw_get_temperature(struct il_priv *il); + +/* Highest firmware API version supported */ +#define IL4965_UCODE_API_MAX 2 + +/* Lowest firmware API version supported */ +#define IL4965_UCODE_API_MIN 2 + +#define IL4965_FW_PRE "iwlwifi-4965-" +#define _IL4965_MODULE_FIRMWARE(api) IL4965_FW_PRE #api ".ucode" +#define IL4965_MODULE_FIRMWARE(api) _IL4965_MODULE_FIRMWARE(api) + +/* check contents of special bootstrap uCode SRAM */ +static int +il4965_verify_bsm(struct il_priv *il) +{ + __le32 *image = il->ucode_boot.v_addr; + u32 len = il->ucode_boot.len; + u32 reg; + u32 val; + + D_INFO("Begin verify bsm\n"); + + /* verify BSM SRAM contents */ + val = il_rd_prph(il, BSM_WR_DWCOUNT_REG); + for (reg = BSM_SRAM_LOWER_BOUND; reg < BSM_SRAM_LOWER_BOUND + len; + reg += sizeof(u32), image++) { + val = il_rd_prph(il, reg); + if (val != le32_to_cpu(*image)) { + IL_ERR("BSM uCode verification failed at " + "addr 0x%08X+%u (of %u), is 0x%x, s/b 0x%x\n", + BSM_SRAM_LOWER_BOUND, reg - BSM_SRAM_LOWER_BOUND, + len, val, le32_to_cpu(*image)); + return -EIO; + } + } + + D_INFO("BSM bootstrap uCode image OK\n"); + + return 0; +} + +/* + * il4965_load_bsm - Load bootstrap instructions + * + * BSM operation: + * + * The Bootstrap State Machine (BSM) stores a short bootstrap uCode program + * in special SRAM that does not power down during RFKILL. When powering back + * up after power-saving sleeps (or during initial uCode load), the BSM loads + * the bootstrap program into the on-board processor, and starts it. + * + * The bootstrap program loads (via DMA) instructions and data for a new + * program from host DRAM locations indicated by the host driver in the + * BSM_DRAM_* registers. Once the new program is loaded, it starts + * automatically. + * + * When initializing the NIC, the host driver points the BSM to the + * "initialize" uCode image. This uCode sets up some internal data, then + * notifies host via "initialize alive" that it is complete. + * + * The host then replaces the BSM_DRAM_* pointer values to point to the + * normal runtime uCode instructions and a backup uCode data cache buffer + * (filled initially with starting data values for the on-board processor), + * then triggers the "initialize" uCode to load and launch the runtime uCode, + * which begins normal operation. + * + * When doing a power-save shutdown, runtime uCode saves data SRAM into + * the backup data cache in DRAM before SRAM is powered down. + * + * When powering back up, the BSM loads the bootstrap program. This reloads + * the runtime uCode instructions and the backup data cache into SRAM, + * and re-launches the runtime uCode from where it left off. + */ +static int +il4965_load_bsm(struct il_priv *il) +{ + __le32 *image = il->ucode_boot.v_addr; + u32 len = il->ucode_boot.len; + dma_addr_t pinst; + dma_addr_t pdata; + u32 inst_len; + u32 data_len; + int i; + u32 done; + u32 reg_offset; + int ret; + + D_INFO("Begin load bsm\n"); + + il->ucode_type = UCODE_RT; + + /* make sure bootstrap program is no larger than BSM's SRAM size */ + if (len > IL49_MAX_BSM_SIZE) + return -EINVAL; + + /* Tell bootstrap uCode where to find the "Initialize" uCode + * in host DRAM ... host DRAM physical address bits 35:4 for 4965. + * NOTE: il_init_alive_start() will replace these values, + * after the "initialize" uCode has run, to point to + * runtime/protocol instructions and backup data cache. + */ + pinst = il->ucode_init.p_addr >> 4; + pdata = il->ucode_init_data.p_addr >> 4; + inst_len = il->ucode_init.len; + data_len = il->ucode_init_data.len; + + il_wr_prph(il, BSM_DRAM_INST_PTR_REG, pinst); + il_wr_prph(il, BSM_DRAM_DATA_PTR_REG, pdata); + il_wr_prph(il, BSM_DRAM_INST_BYTECOUNT_REG, inst_len); + il_wr_prph(il, BSM_DRAM_DATA_BYTECOUNT_REG, data_len); + + /* Fill BSM memory with bootstrap instructions */ + for (reg_offset = BSM_SRAM_LOWER_BOUND; + reg_offset < BSM_SRAM_LOWER_BOUND + len; + reg_offset += sizeof(u32), image++) + _il_wr_prph(il, reg_offset, le32_to_cpu(*image)); + + ret = il4965_verify_bsm(il); + if (ret) + return ret; + + /* Tell BSM to copy from BSM SRAM into instruction SRAM, when asked */ + il_wr_prph(il, BSM_WR_MEM_SRC_REG, 0x0); + il_wr_prph(il, BSM_WR_MEM_DST_REG, IL49_RTC_INST_LOWER_BOUND); + il_wr_prph(il, BSM_WR_DWCOUNT_REG, len / sizeof(u32)); + + /* Load bootstrap code into instruction SRAM now, + * to prepare to load "initialize" uCode */ + il_wr_prph(il, BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START); + + /* Wait for load of bootstrap uCode to finish */ + for (i = 0; i < 100; i++) { + done = il_rd_prph(il, BSM_WR_CTRL_REG); + if (!(done & BSM_WR_CTRL_REG_BIT_START)) + break; + udelay(10); + } + if (i < 100) + D_INFO("BSM write complete, poll %d iterations\n", i); + else { + IL_ERR("BSM write did not complete!\n"); + return -EIO; + } + + /* Enable future boot loads whenever power management unit triggers it + * (e.g. when powering back up after power-save shutdown) */ + il_wr_prph(il, BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START_EN); + + return 0; +} + +/* + * il4965_set_ucode_ptrs - Set uCode address location + * + * Tell initialization uCode where to find runtime uCode. + * + * BSM registers initially contain pointers to initialization uCode. + * We need to replace them to load runtime uCode inst and data, + * and to save runtime data when powering down. + */ +static int +il4965_set_ucode_ptrs(struct il_priv *il) +{ + dma_addr_t pinst; + dma_addr_t pdata; + + /* bits 35:4 for 4965 */ + pinst = il->ucode_code.p_addr >> 4; + pdata = il->ucode_data_backup.p_addr >> 4; + + /* Tell bootstrap uCode where to find image to load */ + il_wr_prph(il, BSM_DRAM_INST_PTR_REG, pinst); + il_wr_prph(il, BSM_DRAM_DATA_PTR_REG, pdata); + il_wr_prph(il, BSM_DRAM_DATA_BYTECOUNT_REG, il->ucode_data.len); + + /* Inst byte count must be last to set up, bit 31 signals uCode + * that all new ptr/size info is in place */ + il_wr_prph(il, BSM_DRAM_INST_BYTECOUNT_REG, + il->ucode_code.len | BSM_DRAM_INST_LOAD); + D_INFO("Runtime uCode pointers are set.\n"); + + return 0; +} + +/* + * il4965_init_alive_start - Called after N_ALIVE notification received + * + * Called after N_ALIVE notification received from "initialize" uCode. + * + * The 4965 "initialize" ALIVE reply contains calibration data for: + * Voltage, temperature, and MIMO tx gain correction, now stored in il + * (3945 does not contain this data). + * + * Tell "initialize" uCode to go ahead and load the runtime uCode. +*/ +static void +il4965_init_alive_start(struct il_priv *il) +{ + /* Bootstrap uCode has loaded initialize uCode ... verify inst image. + * This is a paranoid check, because we would not have gotten the + * "initialize" alive if code weren't properly loaded. */ + if (il4965_verify_ucode(il)) { + /* Runtime instruction load was bad; + * take it all the way back down so we can try again */ + D_INFO("Bad \"initialize\" uCode load.\n"); + goto restart; + } + + /* Calculate temperature */ + il->temperature = il4965_hw_get_temperature(il); + + /* Send pointers to protocol/runtime uCode image ... init code will + * load and launch runtime uCode, which will send us another "Alive" + * notification. */ + D_INFO("Initialization Alive received.\n"); + if (il4965_set_ucode_ptrs(il)) { + /* Runtime instruction load won't happen; + * take it all the way back down so we can try again */ + D_INFO("Couldn't set up uCode pointers.\n"); + goto restart; + } + return; + +restart: + queue_work(il->workqueue, &il->restart); +} + +static bool +iw4965_is_ht40_channel(__le32 rxon_flags) +{ + int chan_mod = + le32_to_cpu(rxon_flags & RXON_FLG_CHANNEL_MODE_MSK) >> + RXON_FLG_CHANNEL_MODE_POS; + return (chan_mod == CHANNEL_MODE_PURE_40 || + chan_mod == CHANNEL_MODE_MIXED); +} + +void +il4965_nic_config(struct il_priv *il) +{ + unsigned long flags; + u16 radio_cfg; + + spin_lock_irqsave(&il->lock, flags); + + radio_cfg = il_eeprom_query16(il, EEPROM_RADIO_CONFIG); + + /* write radio config values to register */ + if (EEPROM_RF_CFG_TYPE_MSK(radio_cfg) == EEPROM_4965_RF_CFG_TYPE_MAX) + il_set_bit(il, CSR_HW_IF_CONFIG_REG, + EEPROM_RF_CFG_TYPE_MSK(radio_cfg) | + EEPROM_RF_CFG_STEP_MSK(radio_cfg) | + EEPROM_RF_CFG_DASH_MSK(radio_cfg)); + + /* set CSR_HW_CONFIG_REG for uCode use */ + il_set_bit(il, CSR_HW_IF_CONFIG_REG, + CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI | + CSR_HW_IF_CONFIG_REG_BIT_MAC_SI); + + il->calib_info = + (struct il_eeprom_calib_info *) + il_eeprom_query_addr(il, EEPROM_4965_CALIB_TXPOWER_OFFSET); + + spin_unlock_irqrestore(&il->lock, flags); +} + +/* Reset differential Rx gains in NIC to prepare for chain noise calibration. + * Called after every association, but this runs only once! + * ... once chain noise is calibrated the first time, it's good forever. */ +static void +il4965_chain_noise_reset(struct il_priv *il) +{ + struct il_chain_noise_data *data = &(il->chain_noise_data); + + if (data->state == IL_CHAIN_NOISE_ALIVE && il_is_any_associated(il)) { + struct il_calib_diff_gain_cmd cmd; + + /* clear data for chain noise calibration algorithm */ + data->chain_noise_a = 0; + data->chain_noise_b = 0; + data->chain_noise_c = 0; + data->chain_signal_a = 0; + data->chain_signal_b = 0; + data->chain_signal_c = 0; + data->beacon_count = 0; + + memset(&cmd, 0, sizeof(cmd)); + cmd.hdr.op_code = IL_PHY_CALIBRATE_DIFF_GAIN_CMD; + cmd.diff_gain_a = 0; + cmd.diff_gain_b = 0; + cmd.diff_gain_c = 0; + if (il_send_cmd_pdu(il, C_PHY_CALIBRATION, sizeof(cmd), &cmd)) + IL_ERR("Could not send C_PHY_CALIBRATION\n"); + data->state = IL_CHAIN_NOISE_ACCUMULATE; + D_CALIB("Run chain_noise_calibrate\n"); + } +} + +static s32 +il4965_math_div_round(s32 num, s32 denom, s32 * res) +{ + s32 sign = 1; + + if (num < 0) { + sign = -sign; + num = -num; + } + if (denom < 0) { + sign = -sign; + denom = -denom; + } + *res = ((num * 2 + denom) / (denom * 2)) * sign; + + return 1; +} + +/* + * il4965_get_voltage_compensation - Power supply voltage comp for txpower + * + * Determines power supply voltage compensation for txpower calculations. + * Returns number of 1/2-dB steps to subtract from gain table idx, + * to compensate for difference between power supply voltage during + * factory measurements, vs. current power supply voltage. + * + * Voltage indication is higher for lower voltage. + * Lower voltage requires more gain (lower gain table idx). + */ +static s32 +il4965_get_voltage_compensation(s32 eeprom_voltage, s32 current_voltage) +{ + s32 comp = 0; + + if (TX_POWER_IL_ILLEGAL_VOLTAGE == eeprom_voltage || + TX_POWER_IL_ILLEGAL_VOLTAGE == current_voltage) + return 0; + + il4965_math_div_round(current_voltage - eeprom_voltage, + TX_POWER_IL_VOLTAGE_CODES_PER_03V, &comp); + + if (current_voltage > eeprom_voltage) + comp *= 2; + if ((comp < -2) || (comp > 2)) + comp = 0; + + return comp; +} + +static s32 +il4965_get_tx_atten_grp(u16 channel) +{ + if (channel >= CALIB_IL_TX_ATTEN_GR5_FCH && + channel <= CALIB_IL_TX_ATTEN_GR5_LCH) + return CALIB_CH_GROUP_5; + + if (channel >= CALIB_IL_TX_ATTEN_GR1_FCH && + channel <= CALIB_IL_TX_ATTEN_GR1_LCH) + return CALIB_CH_GROUP_1; + + if (channel >= CALIB_IL_TX_ATTEN_GR2_FCH && + channel <= CALIB_IL_TX_ATTEN_GR2_LCH) + return CALIB_CH_GROUP_2; + + if (channel >= CALIB_IL_TX_ATTEN_GR3_FCH && + channel <= CALIB_IL_TX_ATTEN_GR3_LCH) + return CALIB_CH_GROUP_3; + + if (channel >= CALIB_IL_TX_ATTEN_GR4_FCH && + channel <= CALIB_IL_TX_ATTEN_GR4_LCH) + return CALIB_CH_GROUP_4; + + return -EINVAL; +} + +static u32 +il4965_get_sub_band(const struct il_priv *il, u32 channel) +{ + s32 b = -1; + + for (b = 0; b < EEPROM_TX_POWER_BANDS; b++) { + if (il->calib_info->band_info[b].ch_from == 0) + continue; + + if (channel >= il->calib_info->band_info[b].ch_from && + channel <= il->calib_info->band_info[b].ch_to) + break; + } + + return b; +} + +static s32 +il4965_interpolate_value(s32 x, s32 x1, s32 y1, s32 x2, s32 y2) +{ + s32 val; + + if (x2 == x1) + return y1; + else { + il4965_math_div_round((x2 - x) * (y1 - y2), (x2 - x1), &val); + return val + y2; + } +} + +/* + * il4965_interpolate_chan - Interpolate factory measurements for one channel + * + * Interpolates factory measurements from the two sample channels within a + * sub-band, to apply to channel of interest. Interpolation is proportional to + * differences in channel frequencies, which is proportional to differences + * in channel number. + */ +static int +il4965_interpolate_chan(struct il_priv *il, u32 channel, + struct il_eeprom_calib_ch_info *chan_info) +{ + s32 s = -1; + u32 c; + u32 m; + const struct il_eeprom_calib_measure *m1; + const struct il_eeprom_calib_measure *m2; + struct il_eeprom_calib_measure *omeas; + u32 ch_i1; + u32 ch_i2; + + s = il4965_get_sub_band(il, channel); + if (s >= EEPROM_TX_POWER_BANDS) { + IL_ERR("Tx Power can not find channel %d\n", channel); + return -1; + } + + ch_i1 = il->calib_info->band_info[s].ch1.ch_num; + ch_i2 = il->calib_info->band_info[s].ch2.ch_num; + chan_info->ch_num = (u8) channel; + + D_TXPOWER("channel %d subband %d factory cal ch %d & %d\n", channel, s, + ch_i1, ch_i2); + + for (c = 0; c < EEPROM_TX_POWER_TX_CHAINS; c++) { + for (m = 0; m < EEPROM_TX_POWER_MEASUREMENTS; m++) { + m1 = &(il->calib_info->band_info[s].ch1. + measurements[c][m]); + m2 = &(il->calib_info->band_info[s].ch2. + measurements[c][m]); + omeas = &(chan_info->measurements[c][m]); + + omeas->actual_pow = + (u8) il4965_interpolate_value(channel, ch_i1, + m1->actual_pow, ch_i2, + m2->actual_pow); + omeas->gain_idx = + (u8) il4965_interpolate_value(channel, ch_i1, + m1->gain_idx, ch_i2, + m2->gain_idx); + omeas->temperature = + (u8) il4965_interpolate_value(channel, ch_i1, + m1->temperature, + ch_i2, + m2->temperature); + omeas->pa_det = + (s8) il4965_interpolate_value(channel, ch_i1, + m1->pa_det, ch_i2, + m2->pa_det); + + D_TXPOWER("chain %d meas %d AP1=%d AP2=%d AP=%d\n", c, + m, m1->actual_pow, m2->actual_pow, + omeas->actual_pow); + D_TXPOWER("chain %d meas %d NI1=%d NI2=%d NI=%d\n", c, + m, m1->gain_idx, m2->gain_idx, + omeas->gain_idx); + D_TXPOWER("chain %d meas %d PA1=%d PA2=%d PA=%d\n", c, + m, m1->pa_det, m2->pa_det, omeas->pa_det); + D_TXPOWER("chain %d meas %d T1=%d T2=%d T=%d\n", c, + m, m1->temperature, m2->temperature, + omeas->temperature); + } + } + + return 0; +} + +/* bit-rate-dependent table to prevent Tx distortion, in half-dB units, + * for OFDM 6, 12, 18, 24, 36, 48, 54, 60 MBit, and CCK all rates. */ +static s32 back_off_table[] = { + 10, 10, 10, 10, 10, 15, 17, 20, /* OFDM SISO 20 MHz */ + 10, 10, 10, 10, 10, 15, 17, 20, /* OFDM MIMO 20 MHz */ + 10, 10, 10, 10, 10, 15, 17, 20, /* OFDM SISO 40 MHz */ + 10, 10, 10, 10, 10, 15, 17, 20, /* OFDM MIMO 40 MHz */ + 10 /* CCK */ +}; + +/* Thermal compensation values for txpower for various frequency ranges ... + * ratios from 3:1 to 4.5:1 of degrees (Celsius) per half-dB gain adjust */ +static struct il4965_txpower_comp_entry { + s32 degrees_per_05db_a; + s32 degrees_per_05db_a_denom; +} tx_power_cmp_tble[CALIB_CH_GROUP_MAX] = { + { + 9, 2}, /* group 0 5.2, ch 34-43 */ + { + 4, 1}, /* group 1 5.2, ch 44-70 */ + { + 4, 1}, /* group 2 5.2, ch 71-124 */ + { + 4, 1}, /* group 3 5.2, ch 125-200 */ + { + 3, 1} /* group 4 2.4, ch all */ +}; + +static s32 +get_min_power_idx(s32 rate_power_idx, u32 band) +{ + if (!band) { + if ((rate_power_idx & 7) <= 4) + return MIN_TX_GAIN_IDX_52GHZ_EXT; + } + return MIN_TX_GAIN_IDX; +} + +struct gain_entry { + u8 dsp; + u8 radio; +}; + +static const struct gain_entry gain_table[2][108] = { + /* 5.2GHz power gain idx table */ + { + {123, 0x3F}, /* highest txpower */ + {117, 0x3F}, + {110, 0x3F}, + {104, 0x3F}, + {98, 0x3F}, + {110, 0x3E}, + {104, 0x3E}, + {98, 0x3E}, + {110, 0x3D}, + {104, 0x3D}, + {98, 0x3D}, + {110, 0x3C}, + {104, 0x3C}, + {98, 0x3C}, + {110, 0x3B}, + {104, 0x3B}, + {98, 0x3B}, + {110, 0x3A}, + {104, 0x3A}, + {98, 0x3A}, + {110, 0x39}, + {104, 0x39}, + {98, 0x39}, + {110, 0x38}, + {104, 0x38}, + {98, 0x38}, + {110, 0x37}, + {104, 0x37}, + {98, 0x37}, + {110, 0x36}, + {104, 0x36}, + {98, 0x36}, + {110, 0x35}, + {104, 0x35}, + {98, 0x35}, + {110, 0x34}, + {104, 0x34}, + {98, 0x34}, + {110, 0x33}, + {104, 0x33}, + {98, 0x33}, + {110, 0x32}, + {104, 0x32}, + {98, 0x32}, + {110, 0x31}, + {104, 0x31}, + {98, 0x31}, + {110, 0x30}, + {104, 0x30}, + {98, 0x30}, + {110, 0x25}, + {104, 0x25}, + {98, 0x25}, + {110, 0x24}, + {104, 0x24}, + {98, 0x24}, + {110, 0x23}, + {104, 0x23}, + {98, 0x23}, + {110, 0x22}, + {104, 0x18}, + {98, 0x18}, + {110, 0x17}, + {104, 0x17}, + {98, 0x17}, + {110, 0x16}, + {104, 0x16}, + {98, 0x16}, + {110, 0x15}, + {104, 0x15}, + {98, 0x15}, + {110, 0x14}, + {104, 0x14}, + {98, 0x14}, + {110, 0x13}, + {104, 0x13}, + {98, 0x13}, + {110, 0x12}, + {104, 0x08}, + {98, 0x08}, + {110, 0x07}, + {104, 0x07}, + {98, 0x07}, + {110, 0x06}, + {104, 0x06}, + {98, 0x06}, + {110, 0x05}, + {104, 0x05}, + {98, 0x05}, + {110, 0x04}, + {104, 0x04}, + {98, 0x04}, + {110, 0x03}, + {104, 0x03}, + {98, 0x03}, + {110, 0x02}, + {104, 0x02}, + {98, 0x02}, + {110, 0x01}, + {104, 0x01}, + {98, 0x01}, + {110, 0x00}, + {104, 0x00}, + {98, 0x00}, + {93, 0x00}, + {88, 0x00}, + {83, 0x00}, + {78, 0x00}, + }, + /* 2.4GHz power gain idx table */ + { + {110, 0x3f}, /* highest txpower */ + {104, 0x3f}, + {98, 0x3f}, + {110, 0x3e}, + {104, 0x3e}, + {98, 0x3e}, + {110, 0x3d}, + {104, 0x3d}, + {98, 0x3d}, + {110, 0x3c}, + {104, 0x3c}, + {98, 0x3c}, + {110, 0x3b}, + {104, 0x3b}, + {98, 0x3b}, + {110, 0x3a}, + {104, 0x3a}, + {98, 0x3a}, + {110, 0x39}, + {104, 0x39}, + {98, 0x39}, + {110, 0x38}, + {104, 0x38}, + {98, 0x38}, + {110, 0x37}, + {104, 0x37}, + {98, 0x37}, + {110, 0x36}, + {104, 0x36}, + {98, 0x36}, + {110, 0x35}, + {104, 0x35}, + {98, 0x35}, + {110, 0x34}, + {104, 0x34}, + {98, 0x34}, + {110, 0x33}, + {104, 0x33}, + {98, 0x33}, + {110, 0x32}, + {104, 0x32}, + {98, 0x32}, + {110, 0x31}, + {104, 0x31}, + {98, 0x31}, + {110, 0x30}, + {104, 0x30}, + {98, 0x30}, + {110, 0x6}, + {104, 0x6}, + {98, 0x6}, + {110, 0x5}, + {104, 0x5}, + {98, 0x5}, + {110, 0x4}, + {104, 0x4}, + {98, 0x4}, + {110, 0x3}, + {104, 0x3}, + {98, 0x3}, + {110, 0x2}, + {104, 0x2}, + {98, 0x2}, + {110, 0x1}, + {104, 0x1}, + {98, 0x1}, + {110, 0x0}, + {104, 0x0}, + {98, 0x0}, + {97, 0}, + {96, 0}, + {95, 0}, + {94, 0}, + {93, 0}, + {92, 0}, + {91, 0}, + {90, 0}, + {89, 0}, + {88, 0}, + {87, 0}, + {86, 0}, + {85, 0}, + {84, 0}, + {83, 0}, + {82, 0}, + {81, 0}, + {80, 0}, + {79, 0}, + {78, 0}, + {77, 0}, + {76, 0}, + {75, 0}, + {74, 0}, + {73, 0}, + {72, 0}, + {71, 0}, + {70, 0}, + {69, 0}, + {68, 0}, + {67, 0}, + {66, 0}, + {65, 0}, + {64, 0}, + {63, 0}, + {62, 0}, + {61, 0}, + {60, 0}, + {59, 0}, + } +}; + +static int +il4965_fill_txpower_tbl(struct il_priv *il, u8 band, u16 channel, u8 is_ht40, + u8 ctrl_chan_high, + struct il4965_tx_power_db *tx_power_tbl) +{ + u8 saturation_power; + s32 target_power; + s32 user_target_power; + s32 power_limit; + s32 current_temp; + s32 reg_limit; + s32 current_regulatory; + s32 txatten_grp = CALIB_CH_GROUP_MAX; + int i; + int c; + const struct il_channel_info *ch_info = NULL; + struct il_eeprom_calib_ch_info ch_eeprom_info; + const struct il_eeprom_calib_measure *measurement; + s16 voltage; + s32 init_voltage; + s32 voltage_compensation; + s32 degrees_per_05db_num; + s32 degrees_per_05db_denom; + s32 factory_temp; + s32 temperature_comp[2]; + s32 factory_gain_idx[2]; + s32 factory_actual_pwr[2]; + s32 power_idx; + + /* tx_power_user_lmt is in dBm, convert to half-dBm (half-dB units + * are used for idxing into txpower table) */ + user_target_power = 2 * il->tx_power_user_lmt; + + /* Get current (RXON) channel, band, width */ + D_TXPOWER("chan %d band %d is_ht40 %d\n", channel, band, is_ht40); + + ch_info = il_get_channel_info(il, il->band, channel); + + if (!il_is_channel_valid(ch_info)) + return -EINVAL; + + /* get txatten group, used to select 1) thermal txpower adjustment + * and 2) mimo txpower balance between Tx chains. */ + txatten_grp = il4965_get_tx_atten_grp(channel); + if (txatten_grp < 0) { + IL_ERR("Can't find txatten group for channel %d.\n", channel); + return txatten_grp; + } + + D_TXPOWER("channel %d belongs to txatten group %d\n", channel, + txatten_grp); + + if (is_ht40) { + if (ctrl_chan_high) + channel -= 2; + else + channel += 2; + } + + /* hardware txpower limits ... + * saturation (clipping distortion) txpowers are in half-dBm */ + if (band) + saturation_power = il->calib_info->saturation_power24; + else + saturation_power = il->calib_info->saturation_power52; + + if (saturation_power < IL_TX_POWER_SATURATION_MIN || + saturation_power > IL_TX_POWER_SATURATION_MAX) { + if (band) + saturation_power = IL_TX_POWER_DEFAULT_SATURATION_24; + else + saturation_power = IL_TX_POWER_DEFAULT_SATURATION_52; + } + + /* regulatory txpower limits ... reg_limit values are in half-dBm, + * max_power_avg values are in dBm, convert * 2 */ + if (is_ht40) + reg_limit = ch_info->ht40_max_power_avg * 2; + else + reg_limit = ch_info->max_power_avg * 2; + + if ((reg_limit < IL_TX_POWER_REGULATORY_MIN) || + (reg_limit > IL_TX_POWER_REGULATORY_MAX)) { + if (band) + reg_limit = IL_TX_POWER_DEFAULT_REGULATORY_24; + else + reg_limit = IL_TX_POWER_DEFAULT_REGULATORY_52; + } + + /* Interpolate txpower calibration values for this channel, + * based on factory calibration tests on spaced channels. */ + il4965_interpolate_chan(il, channel, &ch_eeprom_info); + + /* calculate tx gain adjustment based on power supply voltage */ + voltage = le16_to_cpu(il->calib_info->voltage); + init_voltage = (s32) le32_to_cpu(il->card_alive_init.voltage); + voltage_compensation = + il4965_get_voltage_compensation(voltage, init_voltage); + + D_TXPOWER("curr volt %d eeprom volt %d volt comp %d\n", init_voltage, + voltage, voltage_compensation); + + /* get current temperature (Celsius) */ + current_temp = max(il->temperature, IL_TX_POWER_TEMPERATURE_MIN); + current_temp = min(il->temperature, IL_TX_POWER_TEMPERATURE_MAX); + current_temp = kelvin_to_celsius(current_temp); + + /* select thermal txpower adjustment params, based on channel group + * (same frequency group used for mimo txatten adjustment) */ + degrees_per_05db_num = + tx_power_cmp_tble[txatten_grp].degrees_per_05db_a; + degrees_per_05db_denom = + tx_power_cmp_tble[txatten_grp].degrees_per_05db_a_denom; + + /* get per-chain txpower values from factory measurements */ + for (c = 0; c < 2; c++) { + measurement = &ch_eeprom_info.measurements[c][1]; + + /* txgain adjustment (in half-dB steps) based on difference + * between factory and current temperature */ + factory_temp = measurement->temperature; + il4965_math_div_round((current_temp - + factory_temp) * degrees_per_05db_denom, + degrees_per_05db_num, + &temperature_comp[c]); + + factory_gain_idx[c] = measurement->gain_idx; + factory_actual_pwr[c] = measurement->actual_pow; + + D_TXPOWER("chain = %d\n", c); + D_TXPOWER("fctry tmp %d, " "curr tmp %d, comp %d steps\n", + factory_temp, current_temp, temperature_comp[c]); + + D_TXPOWER("fctry idx %d, fctry pwr %d\n", factory_gain_idx[c], + factory_actual_pwr[c]); + } + + /* for each of 33 bit-rates (including 1 for CCK) */ + for (i = 0; i < POWER_TBL_NUM_ENTRIES; i++) { + u8 is_mimo_rate; + union il4965_tx_power_dual_stream tx_power; + + /* for mimo, reduce each chain's txpower by half + * (3dB, 6 steps), so total output power is regulatory + * compliant. */ + if (i & 0x8) { + current_regulatory = + reg_limit - + IL_TX_POWER_MIMO_REGULATORY_COMPENSATION; + is_mimo_rate = 1; + } else { + current_regulatory = reg_limit; + is_mimo_rate = 0; + } + + /* find txpower limit, either hardware or regulatory */ + power_limit = saturation_power - back_off_table[i]; + if (power_limit > current_regulatory) + power_limit = current_regulatory; + + /* reduce user's txpower request if necessary + * for this rate on this channel */ + target_power = user_target_power; + if (target_power > power_limit) + target_power = power_limit; + + D_TXPOWER("rate %d sat %d reg %d usr %d tgt %d\n", i, + saturation_power - back_off_table[i], + current_regulatory, user_target_power, target_power); + + /* for each of 2 Tx chains (radio transmitters) */ + for (c = 0; c < 2; c++) { + s32 atten_value; + + if (is_mimo_rate) + atten_value = + (s32) le32_to_cpu(il->card_alive_init. + tx_atten[txatten_grp][c]); + else + atten_value = 0; + + /* calculate idx; higher idx means lower txpower */ + power_idx = + (u8) (factory_gain_idx[c] - + (target_power - factory_actual_pwr[c]) - + temperature_comp[c] - voltage_compensation + + atten_value); + +/* D_TXPOWER("calculated txpower idx %d\n", + power_idx); */ + + if (power_idx < get_min_power_idx(i, band)) + power_idx = get_min_power_idx(i, band); + + /* adjust 5 GHz idx to support negative idxes */ + if (!band) + power_idx += 9; + + /* CCK, rate 32, reduce txpower for CCK */ + if (i == POWER_TBL_CCK_ENTRY) + power_idx += + IL_TX_POWER_CCK_COMPENSATION_C_STEP; + + /* stay within the table! */ + if (power_idx > 107) { + IL_WARN("txpower idx %d > 107\n", power_idx); + power_idx = 107; + } + if (power_idx < 0) { + IL_WARN("txpower idx %d < 0\n", power_idx); + power_idx = 0; + } + + /* fill txpower command for this rate/chain */ + tx_power.s.radio_tx_gain[c] = + gain_table[band][power_idx].radio; + tx_power.s.dsp_predis_atten[c] = + gain_table[band][power_idx].dsp; + + D_TXPOWER("chain %d mimo %d idx %d " + "gain 0x%02x dsp %d\n", c, atten_value, + power_idx, tx_power.s.radio_tx_gain[c], + tx_power.s.dsp_predis_atten[c]); + } /* for each chain */ + + tx_power_tbl->power_tbl[i].dw = cpu_to_le32(tx_power.dw); + + } /* for each rate */ + + return 0; +} + +/* + * il4965_send_tx_power - Configure the TXPOWER level user limit + * + * Uses the active RXON for channel, band, and characteristics (ht40, high) + * The power limit is taken from il->tx_power_user_lmt. + */ +static int +il4965_send_tx_power(struct il_priv *il) +{ + struct il4965_txpowertable_cmd cmd = { 0 }; + int ret; + u8 band = 0; + bool is_ht40 = false; + u8 ctrl_chan_high = 0; + + if (WARN_ONCE + (test_bit(S_SCAN_HW, &il->status), + "TX Power requested while scanning!\n")) + return -EAGAIN; + + band = il->band == NL80211_BAND_2GHZ; + + is_ht40 = iw4965_is_ht40_channel(il->active.flags); + + if (is_ht40 && (il->active.flags & RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK)) + ctrl_chan_high = 1; + + cmd.band = band; + cmd.channel = il->active.channel; + + ret = + il4965_fill_txpower_tbl(il, band, le16_to_cpu(il->active.channel), + is_ht40, ctrl_chan_high, &cmd.tx_power); + if (ret) + goto out; + + ret = il_send_cmd_pdu(il, C_TX_PWR_TBL, sizeof(cmd), &cmd); + +out: + return ret; +} + +static int +il4965_send_rxon_assoc(struct il_priv *il) +{ + int ret = 0; + struct il4965_rxon_assoc_cmd rxon_assoc; + const struct il_rxon_cmd *rxon1 = &il->staging; + const struct il_rxon_cmd *rxon2 = &il->active; + + lockdep_assert_held(&il->mutex); + + if (rxon1->flags == rxon2->flags && + rxon1->filter_flags == rxon2->filter_flags && + rxon1->cck_basic_rates == rxon2->cck_basic_rates && + rxon1->ofdm_ht_single_stream_basic_rates == + rxon2->ofdm_ht_single_stream_basic_rates && + rxon1->ofdm_ht_dual_stream_basic_rates == + rxon2->ofdm_ht_dual_stream_basic_rates && + rxon1->rx_chain == rxon2->rx_chain && + rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates) { + D_INFO("Using current RXON_ASSOC. Not resending.\n"); + return 0; + } + + rxon_assoc.flags = il->staging.flags; + rxon_assoc.filter_flags = il->staging.filter_flags; + rxon_assoc.ofdm_basic_rates = il->staging.ofdm_basic_rates; + rxon_assoc.cck_basic_rates = il->staging.cck_basic_rates; + rxon_assoc.reserved = 0; + rxon_assoc.ofdm_ht_single_stream_basic_rates = + il->staging.ofdm_ht_single_stream_basic_rates; + rxon_assoc.ofdm_ht_dual_stream_basic_rates = + il->staging.ofdm_ht_dual_stream_basic_rates; + rxon_assoc.rx_chain_select_flags = il->staging.rx_chain; + + ret = + il_send_cmd_pdu_async(il, C_RXON_ASSOC, sizeof(rxon_assoc), + &rxon_assoc, NULL); + + return ret; +} + +static int +il4965_commit_rxon(struct il_priv *il) +{ + /* cast away the const for active_rxon in this function */ + struct il_rxon_cmd *active_rxon = (void *)&il->active; + int ret; + bool new_assoc = !!(il->staging.filter_flags & RXON_FILTER_ASSOC_MSK); + + if (!il_is_alive(il)) + return -EBUSY; + + /* always get timestamp with Rx frame */ + il->staging.flags |= RXON_FLG_TSF2HOST_MSK; + + ret = il_check_rxon_cmd(il); + if (ret) { + IL_ERR("Invalid RXON configuration. Not committing.\n"); + return -EINVAL; + } + + /* + * receive commit_rxon request + * abort any previous channel switch if still in process + */ + if (test_bit(S_CHANNEL_SWITCH_PENDING, &il->status) && + il->switch_channel != il->staging.channel) { + D_11H("abort channel switch on %d\n", + le16_to_cpu(il->switch_channel)); + il_chswitch_done(il, false); + } + + /* If we don't need to send a full RXON, we can use + * il_rxon_assoc_cmd which is used to reconfigure filter + * and other flags for the current radio configuration. */ + if (!il_full_rxon_required(il)) { + ret = il_send_rxon_assoc(il); + if (ret) { + IL_ERR("Error setting RXON_ASSOC (%d)\n", ret); + return ret; + } + + memcpy(active_rxon, &il->staging, sizeof(*active_rxon)); + il_print_rx_config_cmd(il); + /* + * We do not commit tx power settings while channel changing, + * do it now if tx power changed. + */ + il_set_tx_power(il, il->tx_power_next, false); + return 0; + } + + /* If we are currently associated and the new config requires + * an RXON_ASSOC and the new config wants the associated mask enabled, + * we must clear the associated from the active configuration + * before we apply the new config */ + if (il_is_associated(il) && new_assoc) { + D_INFO("Toggling associated bit on current RXON\n"); + active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK; + + ret = + il_send_cmd_pdu(il, C_RXON, + sizeof(struct il_rxon_cmd), active_rxon); + + /* If the mask clearing failed then we set + * active_rxon back to what it was previously */ + if (ret) { + active_rxon->filter_flags |= RXON_FILTER_ASSOC_MSK; + IL_ERR("Error clearing ASSOC_MSK (%d)\n", ret); + return ret; + } + il_clear_ucode_stations(il); + il_restore_stations(il); + ret = il4965_restore_default_wep_keys(il); + if (ret) { + IL_ERR("Failed to restore WEP keys (%d)\n", ret); + return ret; + } + } + + D_INFO("Sending RXON\n" "* with%s RXON_FILTER_ASSOC_MSK\n" + "* channel = %d\n" "* bssid = %pM\n", (new_assoc ? "" : "out"), + le16_to_cpu(il->staging.channel), il->staging.bssid_addr); + + il_set_rxon_hwcrypto(il, !il->cfg->mod_params->sw_crypto); + + /* Apply the new configuration + * RXON unassoc clears the station table in uCode so restoration of + * stations is needed after it (the RXON command) completes + */ + if (!new_assoc) { + ret = + il_send_cmd_pdu(il, C_RXON, + sizeof(struct il_rxon_cmd), &il->staging); + if (ret) { + IL_ERR("Error setting new RXON (%d)\n", ret); + return ret; + } + D_INFO("Return from !new_assoc RXON.\n"); + memcpy(active_rxon, &il->staging, sizeof(*active_rxon)); + il_clear_ucode_stations(il); + il_restore_stations(il); + ret = il4965_restore_default_wep_keys(il); + if (ret) { + IL_ERR("Failed to restore WEP keys (%d)\n", ret); + return ret; + } + } + if (new_assoc) { + il->start_calib = 0; + /* Apply the new configuration + * RXON assoc doesn't clear the station table in uCode, + */ + ret = + il_send_cmd_pdu(il, C_RXON, + sizeof(struct il_rxon_cmd), &il->staging); + if (ret) { + IL_ERR("Error setting new RXON (%d)\n", ret); + return ret; + } + memcpy(active_rxon, &il->staging, sizeof(*active_rxon)); + } + il_print_rx_config_cmd(il); + + il4965_init_sensitivity(il); + + /* If we issue a new RXON command which required a tune then we must + * send a new TXPOWER command or we won't be able to Tx any frames */ + ret = il_set_tx_power(il, il->tx_power_next, true); + if (ret) { + IL_ERR("Error sending TX power (%d)\n", ret); + return ret; + } + + return 0; +} + +static int +il4965_hw_channel_switch(struct il_priv *il, + struct ieee80211_channel_switch *ch_switch) +{ + int rc; + u8 band = 0; + bool is_ht40 = false; + u8 ctrl_chan_high = 0; + struct il4965_channel_switch_cmd cmd; + const struct il_channel_info *ch_info; + u32 switch_time_in_usec, ucode_switch_time; + u16 ch; + u32 tsf_low; + u8 switch_count; + u16 beacon_interval = le16_to_cpu(il->timing.beacon_interval); + struct ieee80211_vif *vif = il->vif; + band = (il->band == NL80211_BAND_2GHZ); + + if (WARN_ON_ONCE(vif == NULL)) + return -EIO; + + is_ht40 = iw4965_is_ht40_channel(il->staging.flags); + + if (is_ht40 && (il->staging.flags & RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK)) + ctrl_chan_high = 1; + + cmd.band = band; + cmd.expect_beacon = 0; + ch = ch_switch->chandef.chan->hw_value; + cmd.channel = cpu_to_le16(ch); + cmd.rxon_flags = il->staging.flags; + cmd.rxon_filter_flags = il->staging.filter_flags; + switch_count = ch_switch->count; + tsf_low = ch_switch->timestamp & 0x0ffffffff; + /* + * calculate the ucode channel switch time + * adding TSF as one of the factor for when to switch + */ + if (il->ucode_beacon_time > tsf_low && beacon_interval) { + if (switch_count > + ((il->ucode_beacon_time - tsf_low) / beacon_interval)) { + switch_count -= + (il->ucode_beacon_time - tsf_low) / beacon_interval; + } else + switch_count = 0; + } + if (switch_count <= 1) + cmd.switch_time = cpu_to_le32(il->ucode_beacon_time); + else { + switch_time_in_usec = + vif->bss_conf.beacon_int * switch_count * TIME_UNIT; + ucode_switch_time = + il_usecs_to_beacons(il, switch_time_in_usec, + beacon_interval); + cmd.switch_time = + il_add_beacon_time(il, il->ucode_beacon_time, + ucode_switch_time, beacon_interval); + } + D_11H("uCode time for the switch is 0x%x\n", cmd.switch_time); + ch_info = il_get_channel_info(il, il->band, ch); + if (ch_info) + cmd.expect_beacon = il_is_channel_radar(ch_info); + else { + IL_ERR("invalid channel switch from %u to %u\n", + il->active.channel, ch); + return -EFAULT; + } + + rc = il4965_fill_txpower_tbl(il, band, ch, is_ht40, ctrl_chan_high, + &cmd.tx_power); + if (rc) { + D_11H("error:%d fill txpower_tbl\n", rc); + return rc; + } + + return il_send_cmd_pdu(il, C_CHANNEL_SWITCH, sizeof(cmd), &cmd); +} + +/* + * il4965_txq_update_byte_cnt_tbl - Set up entry in Tx byte-count array + */ +static void +il4965_txq_update_byte_cnt_tbl(struct il_priv *il, struct il_tx_queue *txq, + u16 byte_cnt) +{ + struct il4965_scd_bc_tbl *scd_bc_tbl = il->scd_bc_tbls.addr; + int txq_id = txq->q.id; + int write_ptr = txq->q.write_ptr; + int len = byte_cnt + IL_TX_CRC_SIZE + IL_TX_DELIMITER_SIZE; + __le16 bc_ent; + + WARN_ON(len > 0xFFF || write_ptr >= TFD_QUEUE_SIZE_MAX); + + bc_ent = cpu_to_le16(len & 0xFFF); + /* Set up byte count within first 256 entries */ + scd_bc_tbl[txq_id].tfd_offset[write_ptr] = bc_ent; + + /* If within first 64 entries, duplicate at end */ + if (write_ptr < TFD_QUEUE_SIZE_BC_DUP) + scd_bc_tbl[txq_id].tfd_offset[TFD_QUEUE_SIZE_MAX + write_ptr] = + bc_ent; +} + +/* + * il4965_hw_get_temperature - return the calibrated temperature (in Kelvin) + * + * A return of <0 indicates bogus data in the stats + */ +static int +il4965_hw_get_temperature(struct il_priv *il) +{ + s32 temperature; + s32 vt; + s32 R1, R2, R3; + u32 R4; + + if (test_bit(S_TEMPERATURE, &il->status) && + (il->_4965.stats.flag & STATS_REPLY_FLG_HT40_MODE_MSK)) { + D_TEMP("Running HT40 temperature calibration\n"); + R1 = (s32) le32_to_cpu(il->card_alive_init.therm_r1[1]); + R2 = (s32) le32_to_cpu(il->card_alive_init.therm_r2[1]); + R3 = (s32) le32_to_cpu(il->card_alive_init.therm_r3[1]); + R4 = le32_to_cpu(il->card_alive_init.therm_r4[1]); + } else { + D_TEMP("Running temperature calibration\n"); + R1 = (s32) le32_to_cpu(il->card_alive_init.therm_r1[0]); + R2 = (s32) le32_to_cpu(il->card_alive_init.therm_r2[0]); + R3 = (s32) le32_to_cpu(il->card_alive_init.therm_r3[0]); + R4 = le32_to_cpu(il->card_alive_init.therm_r4[0]); + } + + /* + * Temperature is only 23 bits, so sign extend out to 32. + * + * NOTE If we haven't received a stats notification yet + * with an updated temperature, use R4 provided to us in the + * "initialize" ALIVE response. + */ + if (!test_bit(S_TEMPERATURE, &il->status)) + vt = sign_extend32(R4, 23); + else + vt = sign_extend32(le32_to_cpu + (il->_4965.stats.general.common.temperature), + 23); + + D_TEMP("Calib values R[1-3]: %d %d %d R4: %d\n", R1, R2, R3, vt); + + if (R3 == R1) { + IL_ERR("Calibration conflict R1 == R3\n"); + return -1; + } + + /* Calculate temperature in degrees Kelvin, adjust by 97%. + * Add offset to center the adjustment around 0 degrees Centigrade. */ + temperature = TEMPERATURE_CALIB_A_VAL * (vt - R2); + temperature /= (R3 - R1); + temperature = + (temperature * 97) / 100 + TEMPERATURE_CALIB_KELVIN_OFFSET; + + D_TEMP("Calibrated temperature: %dK, %ldC\n", temperature, + kelvin_to_celsius(temperature)); + + return temperature; +} + +/* Adjust Txpower only if temperature variance is greater than threshold. */ +#define IL_TEMPERATURE_THRESHOLD 3 + +/* + * il4965_is_temp_calib_needed - determines if new calibration is needed + * + * If the temperature changed has changed sufficiently, then a recalibration + * is needed. + * + * Assumes caller will replace il->last_temperature once calibration + * executed. + */ +static int +il4965_is_temp_calib_needed(struct il_priv *il) +{ + int temp_diff; + + if (!test_bit(S_STATS, &il->status)) { + D_TEMP("Temperature not updated -- no stats.\n"); + return 0; + } + + temp_diff = il->temperature - il->last_temperature; + + /* get absolute value */ + if (temp_diff < 0) { + D_POWER("Getting cooler, delta %d\n", temp_diff); + temp_diff = -temp_diff; + } else if (temp_diff == 0) + D_POWER("Temperature unchanged\n"); + else + D_POWER("Getting warmer, delta %d\n", temp_diff); + + if (temp_diff < IL_TEMPERATURE_THRESHOLD) { + D_POWER(" => thermal txpower calib not needed\n"); + return 0; + } + + D_POWER(" => thermal txpower calib needed\n"); + + return 1; +} + +void +il4965_temperature_calib(struct il_priv *il) +{ + s32 temp; + + temp = il4965_hw_get_temperature(il); + if (IL_TX_POWER_TEMPERATURE_OUT_OF_RANGE(temp)) + return; + + if (il->temperature != temp) { + if (il->temperature) + D_TEMP("Temperature changed " "from %ldC to %ldC\n", + kelvin_to_celsius(il->temperature), + kelvin_to_celsius(temp)); + else + D_TEMP("Temperature " "initialized to %ldC\n", + kelvin_to_celsius(temp)); + } + + il->temperature = temp; + set_bit(S_TEMPERATURE, &il->status); + + if (!il->disable_tx_power_cal && + unlikely(!test_bit(S_SCANNING, &il->status)) && + il4965_is_temp_calib_needed(il)) + queue_work(il->workqueue, &il->txpower_work); +} + +static u16 +il4965_get_hcmd_size(u8 cmd_id, u16 len) +{ + switch (cmd_id) { + case C_RXON: + return (u16) sizeof(struct il4965_rxon_cmd); + default: + return len; + } +} + +static u16 +il4965_build_addsta_hcmd(const struct il_addsta_cmd *cmd, u8 * data) +{ + struct il4965_addsta_cmd *addsta = (struct il4965_addsta_cmd *)data; + addsta->mode = cmd->mode; + memcpy(&addsta->sta, &cmd->sta, sizeof(struct sta_id_modify)); + memcpy(&addsta->key, &cmd->key, sizeof(struct il4965_keyinfo)); + addsta->station_flags = cmd->station_flags; + addsta->station_flags_msk = cmd->station_flags_msk; + addsta->tid_disable_tx = cmd->tid_disable_tx; + addsta->add_immediate_ba_tid = cmd->add_immediate_ba_tid; + addsta->remove_immediate_ba_tid = cmd->remove_immediate_ba_tid; + addsta->add_immediate_ba_ssn = cmd->add_immediate_ba_ssn; + addsta->sleep_tx_count = cmd->sleep_tx_count; + addsta->reserved1 = cpu_to_le16(0); + addsta->reserved2 = cpu_to_le16(0); + + return (u16) sizeof(struct il4965_addsta_cmd); +} + +static void +il4965_post_scan(struct il_priv *il) +{ + /* + * Since setting the RXON may have been deferred while + * performing the scan, fire one off if needed + */ + if (memcmp(&il->staging, &il->active, sizeof(il->staging))) + il_commit_rxon(il); +} + +static void +il4965_post_associate(struct il_priv *il) +{ + struct ieee80211_vif *vif = il->vif; + int ret = 0; + + if (!vif || !il->is_open) + return; + + if (test_bit(S_EXIT_PENDING, &il->status)) + return; + + il_scan_cancel_timeout(il, 200); + + il->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK; + il_commit_rxon(il); + + ret = il_send_rxon_timing(il); + if (ret) + IL_WARN("RXON timing - " "Attempting to continue.\n"); + + il->staging.filter_flags |= RXON_FILTER_ASSOC_MSK; + + il_set_rxon_ht(il, &il->current_ht_config); + + if (il->ops->set_rxon_chain) + il->ops->set_rxon_chain(il); + + il->staging.assoc_id = cpu_to_le16(vif->cfg.aid); + + D_ASSOC("assoc id %d beacon interval %d\n", vif->cfg.aid, + vif->bss_conf.beacon_int); + + if (vif->bss_conf.use_short_preamble) + il->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK; + else + il->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK; + + if (il->staging.flags & RXON_FLG_BAND_24G_MSK) { + if (vif->bss_conf.use_short_slot) + il->staging.flags |= RXON_FLG_SHORT_SLOT_MSK; + else + il->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK; + } + + il_commit_rxon(il); + + D_ASSOC("Associated as %d to: %pM\n", vif->cfg.aid, + il->active.bssid_addr); + + switch (vif->type) { + case NL80211_IFTYPE_STATION: + break; + case NL80211_IFTYPE_ADHOC: + il4965_send_beacon_cmd(il); + break; + default: + IL_ERR("%s Should not be called in %d mode\n", __func__, + vif->type); + break; + } + + /* the chain noise calibration will enabled PM upon completion + * If chain noise has already been run, then we need to enable + * power management here */ + if (il->chain_noise_data.state == IL_CHAIN_NOISE_DONE) + il_power_update_mode(il, false); + + /* Enable Rx differential gain and sensitivity calibrations */ + il4965_chain_noise_reset(il); + il->start_calib = 1; +} + +static void +il4965_config_ap(struct il_priv *il) +{ + struct ieee80211_vif *vif = il->vif; + int ret = 0; + + lockdep_assert_held(&il->mutex); + + if (test_bit(S_EXIT_PENDING, &il->status)) + return; + + /* The following should be done only at AP bring up */ + if (!il_is_associated(il)) { + + /* RXON - unassoc (to set timing command) */ + il->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK; + il_commit_rxon(il); + + /* RXON Timing */ + ret = il_send_rxon_timing(il); + if (ret) + IL_WARN("RXON timing failed - " + "Attempting to continue.\n"); + + /* AP has all antennas */ + il->chain_noise_data.active_chains = il->hw_params.valid_rx_ant; + il_set_rxon_ht(il, &il->current_ht_config); + if (il->ops->set_rxon_chain) + il->ops->set_rxon_chain(il); + + il->staging.assoc_id = 0; + + if (vif->bss_conf.use_short_preamble) + il->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK; + else + il->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK; + + if (il->staging.flags & RXON_FLG_BAND_24G_MSK) { + if (vif->bss_conf.use_short_slot) + il->staging.flags |= RXON_FLG_SHORT_SLOT_MSK; + else + il->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK; + } + /* need to send beacon cmd before committing assoc RXON! */ + il4965_send_beacon_cmd(il); + /* restore RXON assoc */ + il->staging.filter_flags |= RXON_FILTER_ASSOC_MSK; + il_commit_rxon(il); + } + il4965_send_beacon_cmd(il); +} + +const struct il_ops il4965_ops = { + .txq_update_byte_cnt_tbl = il4965_txq_update_byte_cnt_tbl, + .txq_attach_buf_to_tfd = il4965_hw_txq_attach_buf_to_tfd, + .txq_free_tfd = il4965_hw_txq_free_tfd, + .txq_init = il4965_hw_tx_queue_init, + .is_valid_rtc_data_addr = il4965_hw_valid_rtc_data_addr, + .init_alive_start = il4965_init_alive_start, + .load_ucode = il4965_load_bsm, + .dump_nic_error_log = il4965_dump_nic_error_log, + .dump_fh = il4965_dump_fh, + .set_channel_switch = il4965_hw_channel_switch, + .apm_init = il_apm_init, + .send_tx_power = il4965_send_tx_power, + .update_chain_flags = il4965_update_chain_flags, + .eeprom_acquire_semaphore = il4965_eeprom_acquire_semaphore, + .eeprom_release_semaphore = il4965_eeprom_release_semaphore, + + .rxon_assoc = il4965_send_rxon_assoc, + .commit_rxon = il4965_commit_rxon, + .set_rxon_chain = il4965_set_rxon_chain, + + .get_hcmd_size = il4965_get_hcmd_size, + .build_addsta_hcmd = il4965_build_addsta_hcmd, + .request_scan = il4965_request_scan, + .post_scan = il4965_post_scan, + + .post_associate = il4965_post_associate, + .config_ap = il4965_config_ap, + .manage_ibss_station = il4965_manage_ibss_station, + .update_bcast_stations = il4965_update_bcast_stations, + + .send_led_cmd = il4965_send_led_cmd, +}; + +struct il_cfg il4965_cfg = { + .name = "Intel(R) Wireless WiFi Link 4965AGN", + .fw_name_pre = IL4965_FW_PRE, + .ucode_api_max = IL4965_UCODE_API_MAX, + .ucode_api_min = IL4965_UCODE_API_MIN, + .sku = IL_SKU_A | IL_SKU_G | IL_SKU_N, + .valid_tx_ant = ANT_AB, + .valid_rx_ant = ANT_ABC, + .eeprom_ver = EEPROM_4965_EEPROM_VERSION, + .eeprom_calib_ver = EEPROM_4965_TX_POWER_VERSION, + .mod_params = &il4965_mod_params, + .led_mode = IL_LED_BLINK, + /* + * Force use of chains B and C for scan RX on 5 GHz band + * because the device has off-channel reception on chain A. + */ + .scan_rx_antennas[NL80211_BAND_5GHZ] = ANT_BC, + + .eeprom_size = IL4965_EEPROM_IMG_SIZE, + .num_of_queues = IL49_NUM_QUEUES, + .num_of_ampdu_queues = IL49_NUM_AMPDU_QUEUES, + .pll_cfg_val = 0, + .set_l0s = true, + .use_bsm = true, + .led_compensation = 61, + .chain_noise_num_beacons = IL4965_CAL_NUM_BEACONS, + .wd_timeout = IL_DEF_WD_TIMEOUT, + .temperature_kelvin = true, + .ucode_tracing = true, + .sensitivity_calib_by_driver = true, + .chain_noise_calib_by_driver = true, + + .regulatory_bands = { + EEPROM_REGULATORY_BAND_1_CHANNELS, + EEPROM_REGULATORY_BAND_2_CHANNELS, + EEPROM_REGULATORY_BAND_3_CHANNELS, + EEPROM_REGULATORY_BAND_4_CHANNELS, + EEPROM_REGULATORY_BAND_5_CHANNELS, + EEPROM_4965_REGULATORY_BAND_24_HT40_CHANNELS, + EEPROM_4965_REGULATORY_BAND_52_HT40_CHANNELS + }, + +}; + +/* Module firmware */ +MODULE_FIRMWARE(IL4965_MODULE_FIRMWARE(IL4965_UCODE_API_MAX)); -- cgit v1.2.3