From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/pci/pcie/Kconfig | 144 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 144 insertions(+) create mode 100644 drivers/pci/pcie/Kconfig (limited to 'drivers/pci/pcie/Kconfig') diff --git a/drivers/pci/pcie/Kconfig b/drivers/pci/pcie/Kconfig new file mode 100644 index 000000000..788ac8df3 --- /dev/null +++ b/drivers/pci/pcie/Kconfig @@ -0,0 +1,144 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# PCI Express Port Bus Configuration +# +config PCIEPORTBUS + bool "PCI Express Port Bus support" + help + This enables PCI Express Port Bus support. Users can then enable + support for Native Hot-Plug, Advanced Error Reporting, Power + Management Events, and Downstream Port Containment. + +# +# Include service Kconfig here +# +config HOTPLUG_PCI_PCIE + bool "PCI Express Hotplug driver" + depends on HOTPLUG_PCI && PCIEPORTBUS + help + Say Y here if you have a motherboard that supports PCI Express Native + Hotplug + + When in doubt, say N. + +config PCIEAER + bool "PCI Express Advanced Error Reporting support" + depends on PCIEPORTBUS + select RAS + help + This enables PCI Express Root Port Advanced Error Reporting + (AER) driver support. Error reporting messages sent to Root + Port will be handled by PCI Express AER driver. + +config PCIEAER_INJECT + tristate "PCI Express error injection support" + depends on PCIEAER + select GENERIC_IRQ_INJECTION + help + This enables PCI Express Root Port Advanced Error Reporting + (AER) software error injector. + + Debugging AER code is quite difficult because it is hard + to trigger various real hardware errors. Software-based + error injection can fake almost all kinds of errors with the + help of a user space helper tool aer-inject, which can be + gotten from: + https://git.kernel.org/cgit/linux/kernel/git/gong.chen/aer-inject.git/ + +# +# PCI Express ECRC +# +config PCIE_ECRC + bool "PCI Express ECRC settings control" + depends on PCIEAER + help + Used to override firmware/bios settings for PCI Express ECRC + (transaction layer end-to-end CRC checking). + + When in doubt, say N. + +# +# PCI Express ASPM +# +config PCIEASPM + bool "PCI Express ASPM control" if EXPERT + default y + help + This enables OS control over PCI Express ASPM (Active State + Power Management) and Clock Power Management. ASPM supports + state L0/L0s/L1. + + ASPM is initially set up by the firmware. With this option enabled, + Linux can modify this state in order to disable ASPM on known-bad + hardware or configurations and enable it when known-safe. + + ASPM can be disabled or enabled at runtime via + /sys/module/pcie_aspm/parameters/policy + + When in doubt, say Y. + +choice + prompt "Default ASPM policy" + default PCIEASPM_DEFAULT + depends on PCIEASPM + +config PCIEASPM_DEFAULT + bool "BIOS default" + depends on PCIEASPM + help + Use the BIOS defaults for PCI Express ASPM. + +config PCIEASPM_POWERSAVE + bool "Powersave" + depends on PCIEASPM + help + Enable PCI Express ASPM L0s and L1 where possible, even if the + BIOS did not. + +config PCIEASPM_POWER_SUPERSAVE + bool "Power Supersave" + depends on PCIEASPM + help + Same as PCIEASPM_POWERSAVE, except it also enables L1 substates where + possible. This would result in higher power savings while staying in L1 + where the components support it. + +config PCIEASPM_PERFORMANCE + bool "Performance" + depends on PCIEASPM + help + Disable PCI Express ASPM L0s and L1, even if the BIOS enabled them. +endchoice + +config PCIE_PME + def_bool y + depends on PCIEPORTBUS && PM + +config PCIE_DPC + bool "PCI Express Downstream Port Containment support" + depends on PCIEPORTBUS && PCIEAER + help + This enables PCI Express Downstream Port Containment (DPC) + driver support. DPC events from Root and Downstream ports + will be handled by the DPC driver. If your system doesn't + have this capability or you do not want to use this feature, + it is safe to answer N. + +config PCIE_PTM + bool "PCI Express Precision Time Measurement support" + help + This enables PCI Express Precision Time Measurement (PTM) + support. + + This is only useful if you have devices that support PTM, but it + is safe to enable even if you don't. + +config PCIE_EDR + bool "PCI Express Error Disconnect Recover support" + depends on PCIE_DPC && ACPI + help + This option adds Error Disconnect Recover support as specified + in the Downstream Port Containment Related Enhancements ECN to + the PCI Firmware Specification r3.2. Enable this if you want to + support hybrid DPC model which uses both firmware and OS to + implement DPC. -- cgit v1.2.3