From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/pci/pcie/aspm.c | 1413 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1413 insertions(+) create mode 100644 drivers/pci/pcie/aspm.c (limited to 'drivers/pci/pcie/aspm.c') diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c new file mode 100644 index 000000000..25736d408 --- /dev/null +++ b/drivers/pci/pcie/aspm.c @@ -0,0 +1,1413 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Enable PCIe link L0s/L1 state and Clock Power Management + * + * Copyright (C) 2007 Intel + * Copyright (C) Zhang Yanmin (yanmin.zhang@intel.com) + * Copyright (C) Shaohua Li (shaohua.li@intel.com) + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "../pci.h" + +#ifdef MODULE_PARAM_PREFIX +#undef MODULE_PARAM_PREFIX +#endif +#define MODULE_PARAM_PREFIX "pcie_aspm." + +/* Note: those are not register definitions */ +#define ASPM_STATE_L0S_UP (1) /* Upstream direction L0s state */ +#define ASPM_STATE_L0S_DW (2) /* Downstream direction L0s state */ +#define ASPM_STATE_L1 (4) /* L1 state */ +#define ASPM_STATE_L1_1 (8) /* ASPM L1.1 state */ +#define ASPM_STATE_L1_2 (0x10) /* ASPM L1.2 state */ +#define ASPM_STATE_L1_1_PCIPM (0x20) /* PCI PM L1.1 state */ +#define ASPM_STATE_L1_2_PCIPM (0x40) /* PCI PM L1.2 state */ +#define ASPM_STATE_L1_SS_PCIPM (ASPM_STATE_L1_1_PCIPM | ASPM_STATE_L1_2_PCIPM) +#define ASPM_STATE_L1_2_MASK (ASPM_STATE_L1_2 | ASPM_STATE_L1_2_PCIPM) +#define ASPM_STATE_L1SS (ASPM_STATE_L1_1 | ASPM_STATE_L1_1_PCIPM |\ + ASPM_STATE_L1_2_MASK) +#define ASPM_STATE_L0S (ASPM_STATE_L0S_UP | ASPM_STATE_L0S_DW) +#define ASPM_STATE_ALL (ASPM_STATE_L0S | ASPM_STATE_L1 | \ + ASPM_STATE_L1SS) + +struct pcie_link_state { + struct pci_dev *pdev; /* Upstream component of the Link */ + struct pci_dev *downstream; /* Downstream component, function 0 */ + struct pcie_link_state *root; /* pointer to the root port link */ + struct pcie_link_state *parent; /* pointer to the parent Link state */ + struct list_head sibling; /* node in link_list */ + + /* ASPM state */ + u32 aspm_support:7; /* Supported ASPM state */ + u32 aspm_enabled:7; /* Enabled ASPM state */ + u32 aspm_capable:7; /* Capable ASPM state with latency */ + u32 aspm_default:7; /* Default ASPM state by BIOS */ + u32 aspm_disable:7; /* Disabled ASPM state */ + + /* Clock PM state */ + u32 clkpm_capable:1; /* Clock PM capable? */ + u32 clkpm_enabled:1; /* Current Clock PM state */ + u32 clkpm_default:1; /* Default Clock PM state by BIOS */ + u32 clkpm_disable:1; /* Clock PM disabled */ +}; + +static int aspm_disabled, aspm_force; +static bool aspm_support_enabled = true; +static DEFINE_MUTEX(aspm_lock); +static LIST_HEAD(link_list); + +#define POLICY_DEFAULT 0 /* BIOS default setting */ +#define POLICY_PERFORMANCE 1 /* high performance */ +#define POLICY_POWERSAVE 2 /* high power saving */ +#define POLICY_POWER_SUPERSAVE 3 /* possibly even more power saving */ + +#ifdef CONFIG_PCIEASPM_PERFORMANCE +static int aspm_policy = POLICY_PERFORMANCE; +#elif defined CONFIG_PCIEASPM_POWERSAVE +static int aspm_policy = POLICY_POWERSAVE; +#elif defined CONFIG_PCIEASPM_POWER_SUPERSAVE +static int aspm_policy = POLICY_POWER_SUPERSAVE; +#else +static int aspm_policy; +#endif + +static const char *policy_str[] = { + [POLICY_DEFAULT] = "default", + [POLICY_PERFORMANCE] = "performance", + [POLICY_POWERSAVE] = "powersave", + [POLICY_POWER_SUPERSAVE] = "powersupersave" +}; + +#define LINK_RETRAIN_TIMEOUT HZ + +/* + * The L1 PM substate capability is only implemented in function 0 in a + * multi function device. + */ +static struct pci_dev *pci_function_0(struct pci_bus *linkbus) +{ + struct pci_dev *child; + + list_for_each_entry(child, &linkbus->devices, bus_list) + if (PCI_FUNC(child->devfn) == 0) + return child; + return NULL; +} + +static int policy_to_aspm_state(struct pcie_link_state *link) +{ + switch (aspm_policy) { + case POLICY_PERFORMANCE: + /* Disable ASPM and Clock PM */ + return 0; + case POLICY_POWERSAVE: + /* Enable ASPM L0s/L1 */ + return (ASPM_STATE_L0S | ASPM_STATE_L1); + case POLICY_POWER_SUPERSAVE: + /* Enable Everything */ + return ASPM_STATE_ALL; + case POLICY_DEFAULT: + return link->aspm_default; + } + return 0; +} + +static int policy_to_clkpm_state(struct pcie_link_state *link) +{ + switch (aspm_policy) { + case POLICY_PERFORMANCE: + /* Disable ASPM and Clock PM */ + return 0; + case POLICY_POWERSAVE: + case POLICY_POWER_SUPERSAVE: + /* Enable Clock PM */ + return 1; + case POLICY_DEFAULT: + return link->clkpm_default; + } + return 0; +} + +static void pcie_set_clkpm_nocheck(struct pcie_link_state *link, int enable) +{ + struct pci_dev *child; + struct pci_bus *linkbus = link->pdev->subordinate; + u32 val = enable ? PCI_EXP_LNKCTL_CLKREQ_EN : 0; + + list_for_each_entry(child, &linkbus->devices, bus_list) + pcie_capability_clear_and_set_word(child, PCI_EXP_LNKCTL, + PCI_EXP_LNKCTL_CLKREQ_EN, + val); + link->clkpm_enabled = !!enable; +} + +static void pcie_set_clkpm(struct pcie_link_state *link, int enable) +{ + /* + * Don't enable Clock PM if the link is not Clock PM capable + * or Clock PM is disabled + */ + if (!link->clkpm_capable || link->clkpm_disable) + enable = 0; + /* Need nothing if the specified equals to current state */ + if (link->clkpm_enabled == enable) + return; + pcie_set_clkpm_nocheck(link, enable); +} + +static void pcie_clkpm_cap_init(struct pcie_link_state *link, int blacklist) +{ + int capable = 1, enabled = 1; + u32 reg32; + u16 reg16; + struct pci_dev *child; + struct pci_bus *linkbus = link->pdev->subordinate; + + /* All functions should have the same cap and state, take the worst */ + list_for_each_entry(child, &linkbus->devices, bus_list) { + pcie_capability_read_dword(child, PCI_EXP_LNKCAP, ®32); + if (!(reg32 & PCI_EXP_LNKCAP_CLKPM)) { + capable = 0; + enabled = 0; + break; + } + pcie_capability_read_word(child, PCI_EXP_LNKCTL, ®16); + if (!(reg16 & PCI_EXP_LNKCTL_CLKREQ_EN)) + enabled = 0; + } + link->clkpm_enabled = enabled; + link->clkpm_default = enabled; + link->clkpm_capable = capable; + link->clkpm_disable = blacklist ? 1 : 0; +} + +static int pcie_wait_for_retrain(struct pci_dev *pdev) +{ + unsigned long end_jiffies; + u16 reg16; + + /* Wait for Link Training to be cleared by hardware */ + end_jiffies = jiffies + LINK_RETRAIN_TIMEOUT; + do { + pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, ®16); + if (!(reg16 & PCI_EXP_LNKSTA_LT)) + return 0; + msleep(1); + } while (time_before(jiffies, end_jiffies)); + + return -ETIMEDOUT; +} + +static int pcie_retrain_link(struct pcie_link_state *link) +{ + struct pci_dev *parent = link->pdev; + int rc; + u16 reg16; + + /* + * Ensure the updated LNKCTL parameters are used during link + * training by checking that there is no ongoing link training to + * avoid LTSSM race as recommended in Implementation Note at the + * end of PCIe r6.0.1 sec 7.5.3.7. + */ + rc = pcie_wait_for_retrain(parent); + if (rc) + return rc; + + pcie_capability_read_word(parent, PCI_EXP_LNKCTL, ®16); + reg16 |= PCI_EXP_LNKCTL_RL; + pcie_capability_write_word(parent, PCI_EXP_LNKCTL, reg16); + if (parent->clear_retrain_link) { + /* + * Due to an erratum in some devices the Retrain Link bit + * needs to be cleared again manually to allow the link + * training to succeed. + */ + reg16 &= ~PCI_EXP_LNKCTL_RL; + pcie_capability_write_word(parent, PCI_EXP_LNKCTL, reg16); + } + + return pcie_wait_for_retrain(parent); +} + +/* + * pcie_aspm_configure_common_clock: check if the 2 ends of a link + * could use common clock. If they are, configure them to use the + * common clock. That will reduce the ASPM state exit latency. + */ +static void pcie_aspm_configure_common_clock(struct pcie_link_state *link) +{ + int same_clock = 1; + u16 reg16, ccc, parent_old_ccc, child_old_ccc[8]; + struct pci_dev *child, *parent = link->pdev; + struct pci_bus *linkbus = parent->subordinate; + /* + * All functions of a slot should have the same Slot Clock + * Configuration, so just check one function + */ + child = list_entry(linkbus->devices.next, struct pci_dev, bus_list); + BUG_ON(!pci_is_pcie(child)); + + /* Check downstream component if bit Slot Clock Configuration is 1 */ + pcie_capability_read_word(child, PCI_EXP_LNKSTA, ®16); + if (!(reg16 & PCI_EXP_LNKSTA_SLC)) + same_clock = 0; + + /* Check upstream component if bit Slot Clock Configuration is 1 */ + pcie_capability_read_word(parent, PCI_EXP_LNKSTA, ®16); + if (!(reg16 & PCI_EXP_LNKSTA_SLC)) + same_clock = 0; + + /* Port might be already in common clock mode */ + pcie_capability_read_word(parent, PCI_EXP_LNKCTL, ®16); + parent_old_ccc = reg16 & PCI_EXP_LNKCTL_CCC; + if (same_clock && (reg16 & PCI_EXP_LNKCTL_CCC)) { + bool consistent = true; + + list_for_each_entry(child, &linkbus->devices, bus_list) { + pcie_capability_read_word(child, PCI_EXP_LNKCTL, + ®16); + if (!(reg16 & PCI_EXP_LNKCTL_CCC)) { + consistent = false; + break; + } + } + if (consistent) + return; + pci_info(parent, "ASPM: current common clock configuration is inconsistent, reconfiguring\n"); + } + + ccc = same_clock ? PCI_EXP_LNKCTL_CCC : 0; + /* Configure downstream component, all functions */ + list_for_each_entry(child, &linkbus->devices, bus_list) { + pcie_capability_read_word(child, PCI_EXP_LNKCTL, ®16); + child_old_ccc[PCI_FUNC(child->devfn)] = reg16 & PCI_EXP_LNKCTL_CCC; + pcie_capability_clear_and_set_word(child, PCI_EXP_LNKCTL, + PCI_EXP_LNKCTL_CCC, ccc); + } + + /* Configure upstream component */ + pcie_capability_clear_and_set_word(parent, PCI_EXP_LNKCTL, + PCI_EXP_LNKCTL_CCC, ccc); + + if (pcie_retrain_link(link)) { + + /* Training failed. Restore common clock configurations */ + pci_err(parent, "ASPM: Could not configure common clock\n"); + list_for_each_entry(child, &linkbus->devices, bus_list) + pcie_capability_clear_and_set_word(child, PCI_EXP_LNKCTL, + PCI_EXP_LNKCTL_CCC, + child_old_ccc[PCI_FUNC(child->devfn)]); + pcie_capability_clear_and_set_word(parent, PCI_EXP_LNKCTL, + PCI_EXP_LNKCTL_CCC, parent_old_ccc); + } +} + +/* Convert L0s latency encoding to ns */ +static u32 calc_l0s_latency(u32 lnkcap) +{ + u32 encoding = (lnkcap & PCI_EXP_LNKCAP_L0SEL) >> 12; + + if (encoding == 0x7) + return (5 * 1000); /* > 4us */ + return (64 << encoding); +} + +/* Convert L0s acceptable latency encoding to ns */ +static u32 calc_l0s_acceptable(u32 encoding) +{ + if (encoding == 0x7) + return -1U; + return (64 << encoding); +} + +/* Convert L1 latency encoding to ns */ +static u32 calc_l1_latency(u32 lnkcap) +{ + u32 encoding = (lnkcap & PCI_EXP_LNKCAP_L1EL) >> 15; + + if (encoding == 0x7) + return (65 * 1000); /* > 64us */ + return (1000 << encoding); +} + +/* Convert L1 acceptable latency encoding to ns */ +static u32 calc_l1_acceptable(u32 encoding) +{ + if (encoding == 0x7) + return -1U; + return (1000 << encoding); +} + +/* Convert L1SS T_pwr encoding to usec */ +static u32 calc_l1ss_pwron(struct pci_dev *pdev, u32 scale, u32 val) +{ + switch (scale) { + case 0: + return val * 2; + case 1: + return val * 10; + case 2: + return val * 100; + } + pci_err(pdev, "%s: Invalid T_PwrOn scale: %u\n", __func__, scale); + return 0; +} + +/* + * Encode an LTR_L1.2_THRESHOLD value for the L1 PM Substates Control 1 + * register. Ports enter L1.2 when the most recent LTR value is greater + * than or equal to LTR_L1.2_THRESHOLD, so we round up to make sure we + * don't enter L1.2 too aggressively. + * + * See PCIe r6.0, sec 5.5.1, 6.18, 7.8.3.3. + */ +static void encode_l12_threshold(u32 threshold_us, u32 *scale, u32 *value) +{ + u64 threshold_ns = (u64) threshold_us * 1000; + + /* + * LTR_L1.2_THRESHOLD_Value ("value") is a 10-bit field with max + * value of 0x3ff. + */ + if (threshold_ns <= 0x3ff * 1) { + *scale = 0; /* Value times 1ns */ + *value = threshold_ns; + } else if (threshold_ns <= 0x3ff * 32) { + *scale = 1; /* Value times 32ns */ + *value = roundup(threshold_ns, 32) / 32; + } else if (threshold_ns <= 0x3ff * 1024) { + *scale = 2; /* Value times 1024ns */ + *value = roundup(threshold_ns, 1024) / 1024; + } else if (threshold_ns <= 0x3ff * 32768) { + *scale = 3; /* Value times 32768ns */ + *value = roundup(threshold_ns, 32768) / 32768; + } else if (threshold_ns <= 0x3ff * 1048576) { + *scale = 4; /* Value times 1048576ns */ + *value = roundup(threshold_ns, 1048576) / 1048576; + } else if (threshold_ns <= 0x3ff * (u64) 33554432) { + *scale = 5; /* Value times 33554432ns */ + *value = roundup(threshold_ns, 33554432) / 33554432; + } else { + *scale = 5; + *value = 0x3ff; /* Max representable value */ + } +} + +static void pcie_aspm_check_latency(struct pci_dev *endpoint) +{ + u32 latency, encoding, lnkcap_up, lnkcap_dw; + u32 l1_switch_latency = 0, latency_up_l0s; + u32 latency_up_l1, latency_dw_l0s, latency_dw_l1; + u32 acceptable_l0s, acceptable_l1; + struct pcie_link_state *link; + + /* Device not in D0 doesn't need latency check */ + if ((endpoint->current_state != PCI_D0) && + (endpoint->current_state != PCI_UNKNOWN)) + return; + + link = endpoint->bus->self->link_state; + + /* Calculate endpoint L0s acceptable latency */ + encoding = (endpoint->devcap & PCI_EXP_DEVCAP_L0S) >> 6; + acceptable_l0s = calc_l0s_acceptable(encoding); + + /* Calculate endpoint L1 acceptable latency */ + encoding = (endpoint->devcap & PCI_EXP_DEVCAP_L1) >> 9; + acceptable_l1 = calc_l1_acceptable(encoding); + + while (link) { + struct pci_dev *dev = pci_function_0(link->pdev->subordinate); + + /* Read direction exit latencies */ + pcie_capability_read_dword(link->pdev, PCI_EXP_LNKCAP, + &lnkcap_up); + pcie_capability_read_dword(dev, PCI_EXP_LNKCAP, + &lnkcap_dw); + latency_up_l0s = calc_l0s_latency(lnkcap_up); + latency_up_l1 = calc_l1_latency(lnkcap_up); + latency_dw_l0s = calc_l0s_latency(lnkcap_dw); + latency_dw_l1 = calc_l1_latency(lnkcap_dw); + + /* Check upstream direction L0s latency */ + if ((link->aspm_capable & ASPM_STATE_L0S_UP) && + (latency_up_l0s > acceptable_l0s)) + link->aspm_capable &= ~ASPM_STATE_L0S_UP; + + /* Check downstream direction L0s latency */ + if ((link->aspm_capable & ASPM_STATE_L0S_DW) && + (latency_dw_l0s > acceptable_l0s)) + link->aspm_capable &= ~ASPM_STATE_L0S_DW; + /* + * Check L1 latency. + * Every switch on the path to root complex need 1 + * more microsecond for L1. Spec doesn't mention L0s. + * + * The exit latencies for L1 substates are not advertised + * by a device. Since the spec also doesn't mention a way + * to determine max latencies introduced by enabling L1 + * substates on the components, it is not clear how to do + * a L1 substate exit latency check. We assume that the + * L1 exit latencies advertised by a device include L1 + * substate latencies (and hence do not do any check). + */ + latency = max_t(u32, latency_up_l1, latency_dw_l1); + if ((link->aspm_capable & ASPM_STATE_L1) && + (latency + l1_switch_latency > acceptable_l1)) + link->aspm_capable &= ~ASPM_STATE_L1; + l1_switch_latency += 1000; + + link = link->parent; + } +} + +static void pci_clear_and_set_dword(struct pci_dev *pdev, int pos, + u32 clear, u32 set) +{ + u32 val; + + pci_read_config_dword(pdev, pos, &val); + val &= ~clear; + val |= set; + pci_write_config_dword(pdev, pos, val); +} + +/* Calculate L1.2 PM substate timing parameters */ +static void aspm_calc_l1ss_info(struct pcie_link_state *link, + u32 parent_l1ss_cap, u32 child_l1ss_cap) +{ + struct pci_dev *child = link->downstream, *parent = link->pdev; + u32 val1, val2, scale1, scale2; + u32 t_common_mode, t_power_on, l1_2_threshold, scale, value; + u32 ctl1 = 0, ctl2 = 0; + u32 pctl1, pctl2, cctl1, cctl2; + u32 pl1_2_enables, cl1_2_enables; + + if (!(link->aspm_support & ASPM_STATE_L1_2_MASK)) + return; + + /* Choose the greater of the two Port Common_Mode_Restore_Times */ + val1 = (parent_l1ss_cap & PCI_L1SS_CAP_CM_RESTORE_TIME) >> 8; + val2 = (child_l1ss_cap & PCI_L1SS_CAP_CM_RESTORE_TIME) >> 8; + t_common_mode = max(val1, val2); + + /* Choose the greater of the two Port T_POWER_ON times */ + val1 = (parent_l1ss_cap & PCI_L1SS_CAP_P_PWR_ON_VALUE) >> 19; + scale1 = (parent_l1ss_cap & PCI_L1SS_CAP_P_PWR_ON_SCALE) >> 16; + val2 = (child_l1ss_cap & PCI_L1SS_CAP_P_PWR_ON_VALUE) >> 19; + scale2 = (child_l1ss_cap & PCI_L1SS_CAP_P_PWR_ON_SCALE) >> 16; + + if (calc_l1ss_pwron(parent, scale1, val1) > + calc_l1ss_pwron(child, scale2, val2)) { + ctl2 |= scale1 | (val1 << 3); + t_power_on = calc_l1ss_pwron(parent, scale1, val1); + } else { + ctl2 |= scale2 | (val2 << 3); + t_power_on = calc_l1ss_pwron(child, scale2, val2); + } + + /* + * Set LTR_L1.2_THRESHOLD to the time required to transition the + * Link from L0 to L1.2 and back to L0 so we enter L1.2 only if + * downstream devices report (via LTR) that they can tolerate at + * least that much latency. + * + * Based on PCIe r3.1, sec 5.5.3.3.1, Figures 5-16 and 5-17, and + * Table 5-11. T(POWER_OFF) is at most 2us and T(L1.2) is at + * least 4us. + */ + l1_2_threshold = 2 + 4 + t_common_mode + t_power_on; + encode_l12_threshold(l1_2_threshold, &scale, &value); + ctl1 |= t_common_mode << 8 | scale << 29 | value << 16; + + /* Some broken devices only support dword access to L1 SS */ + pci_read_config_dword(parent, parent->l1ss + PCI_L1SS_CTL1, &pctl1); + pci_read_config_dword(parent, parent->l1ss + PCI_L1SS_CTL2, &pctl2); + pci_read_config_dword(child, child->l1ss + PCI_L1SS_CTL1, &cctl1); + pci_read_config_dword(child, child->l1ss + PCI_L1SS_CTL2, &cctl2); + + if (ctl1 == pctl1 && ctl1 == cctl1 && + ctl2 == pctl2 && ctl2 == cctl2) + return; + + /* Disable L1.2 while updating. See PCIe r5.0, sec 5.5.4, 7.8.3.3 */ + pl1_2_enables = pctl1 & PCI_L1SS_CTL1_L1_2_MASK; + cl1_2_enables = cctl1 & PCI_L1SS_CTL1_L1_2_MASK; + + if (pl1_2_enables || cl1_2_enables) { + pci_clear_and_set_dword(child, child->l1ss + PCI_L1SS_CTL1, + PCI_L1SS_CTL1_L1_2_MASK, 0); + pci_clear_and_set_dword(parent, parent->l1ss + PCI_L1SS_CTL1, + PCI_L1SS_CTL1_L1_2_MASK, 0); + } + + /* Program T_POWER_ON times in both ports */ + pci_write_config_dword(parent, parent->l1ss + PCI_L1SS_CTL2, ctl2); + pci_write_config_dword(child, child->l1ss + PCI_L1SS_CTL2, ctl2); + + /* Program Common_Mode_Restore_Time in upstream device */ + pci_clear_and_set_dword(parent, parent->l1ss + PCI_L1SS_CTL1, + PCI_L1SS_CTL1_CM_RESTORE_TIME, ctl1); + + /* Program LTR_L1.2_THRESHOLD time in both ports */ + pci_clear_and_set_dword(parent, parent->l1ss + PCI_L1SS_CTL1, + PCI_L1SS_CTL1_LTR_L12_TH_VALUE | + PCI_L1SS_CTL1_LTR_L12_TH_SCALE, ctl1); + pci_clear_and_set_dword(child, child->l1ss + PCI_L1SS_CTL1, + PCI_L1SS_CTL1_LTR_L12_TH_VALUE | + PCI_L1SS_CTL1_LTR_L12_TH_SCALE, ctl1); + + if (pl1_2_enables || cl1_2_enables) { + pci_clear_and_set_dword(parent, parent->l1ss + PCI_L1SS_CTL1, 0, + pl1_2_enables); + pci_clear_and_set_dword(child, child->l1ss + PCI_L1SS_CTL1, 0, + cl1_2_enables); + } +} + +static void aspm_l1ss_init(struct pcie_link_state *link) +{ + struct pci_dev *child = link->downstream, *parent = link->pdev; + u32 parent_l1ss_cap, child_l1ss_cap; + u32 parent_l1ss_ctl1 = 0, child_l1ss_ctl1 = 0; + + if (!parent->l1ss || !child->l1ss) + return; + + /* Setup L1 substate */ + pci_read_config_dword(parent, parent->l1ss + PCI_L1SS_CAP, + &parent_l1ss_cap); + pci_read_config_dword(child, child->l1ss + PCI_L1SS_CAP, + &child_l1ss_cap); + + if (!(parent_l1ss_cap & PCI_L1SS_CAP_L1_PM_SS)) + parent_l1ss_cap = 0; + if (!(child_l1ss_cap & PCI_L1SS_CAP_L1_PM_SS)) + child_l1ss_cap = 0; + + /* + * If we don't have LTR for the entire path from the Root Complex + * to this device, we can't use ASPM L1.2 because it relies on the + * LTR_L1.2_THRESHOLD. See PCIe r4.0, secs 5.5.4, 6.18. + */ + if (!child->ltr_path) + child_l1ss_cap &= ~PCI_L1SS_CAP_ASPM_L1_2; + + if (parent_l1ss_cap & child_l1ss_cap & PCI_L1SS_CAP_ASPM_L1_1) + link->aspm_support |= ASPM_STATE_L1_1; + if (parent_l1ss_cap & child_l1ss_cap & PCI_L1SS_CAP_ASPM_L1_2) + link->aspm_support |= ASPM_STATE_L1_2; + if (parent_l1ss_cap & child_l1ss_cap & PCI_L1SS_CAP_PCIPM_L1_1) + link->aspm_support |= ASPM_STATE_L1_1_PCIPM; + if (parent_l1ss_cap & child_l1ss_cap & PCI_L1SS_CAP_PCIPM_L1_2) + link->aspm_support |= ASPM_STATE_L1_2_PCIPM; + + if (parent_l1ss_cap) + pci_read_config_dword(parent, parent->l1ss + PCI_L1SS_CTL1, + &parent_l1ss_ctl1); + if (child_l1ss_cap) + pci_read_config_dword(child, child->l1ss + PCI_L1SS_CTL1, + &child_l1ss_ctl1); + + if (parent_l1ss_ctl1 & child_l1ss_ctl1 & PCI_L1SS_CTL1_ASPM_L1_1) + link->aspm_enabled |= ASPM_STATE_L1_1; + if (parent_l1ss_ctl1 & child_l1ss_ctl1 & PCI_L1SS_CTL1_ASPM_L1_2) + link->aspm_enabled |= ASPM_STATE_L1_2; + if (parent_l1ss_ctl1 & child_l1ss_ctl1 & PCI_L1SS_CTL1_PCIPM_L1_1) + link->aspm_enabled |= ASPM_STATE_L1_1_PCIPM; + if (parent_l1ss_ctl1 & child_l1ss_ctl1 & PCI_L1SS_CTL1_PCIPM_L1_2) + link->aspm_enabled |= ASPM_STATE_L1_2_PCIPM; + + if (link->aspm_support & ASPM_STATE_L1SS) + aspm_calc_l1ss_info(link, parent_l1ss_cap, child_l1ss_cap); +} + +static void pcie_aspm_cap_init(struct pcie_link_state *link, int blacklist) +{ + struct pci_dev *child = link->downstream, *parent = link->pdev; + u32 parent_lnkcap, child_lnkcap; + u16 parent_lnkctl, child_lnkctl; + struct pci_bus *linkbus = parent->subordinate; + + if (blacklist) { + /* Set enabled/disable so that we will disable ASPM later */ + link->aspm_enabled = ASPM_STATE_ALL; + link->aspm_disable = ASPM_STATE_ALL; + return; + } + + /* + * If ASPM not supported, don't mess with the clocks and link, + * bail out now. + */ + pcie_capability_read_dword(parent, PCI_EXP_LNKCAP, &parent_lnkcap); + pcie_capability_read_dword(child, PCI_EXP_LNKCAP, &child_lnkcap); + if (!(parent_lnkcap & child_lnkcap & PCI_EXP_LNKCAP_ASPMS)) + return; + + /* Configure common clock before checking latencies */ + pcie_aspm_configure_common_clock(link); + + /* + * Re-read upstream/downstream components' register state after + * clock configuration. L0s & L1 exit latencies in the otherwise + * read-only Link Capabilities may change depending on common clock + * configuration (PCIe r5.0, sec 7.5.3.6). + */ + pcie_capability_read_dword(parent, PCI_EXP_LNKCAP, &parent_lnkcap); + pcie_capability_read_dword(child, PCI_EXP_LNKCAP, &child_lnkcap); + pcie_capability_read_word(parent, PCI_EXP_LNKCTL, &parent_lnkctl); + pcie_capability_read_word(child, PCI_EXP_LNKCTL, &child_lnkctl); + + /* + * Setup L0s state + * + * Note that we must not enable L0s in either direction on a + * given link unless components on both sides of the link each + * support L0s. + */ + if (parent_lnkcap & child_lnkcap & PCI_EXP_LNKCAP_ASPM_L0S) + link->aspm_support |= ASPM_STATE_L0S; + + if (child_lnkctl & PCI_EXP_LNKCTL_ASPM_L0S) + link->aspm_enabled |= ASPM_STATE_L0S_UP; + if (parent_lnkctl & PCI_EXP_LNKCTL_ASPM_L0S) + link->aspm_enabled |= ASPM_STATE_L0S_DW; + + /* Setup L1 state */ + if (parent_lnkcap & child_lnkcap & PCI_EXP_LNKCAP_ASPM_L1) + link->aspm_support |= ASPM_STATE_L1; + + if (parent_lnkctl & child_lnkctl & PCI_EXP_LNKCTL_ASPM_L1) + link->aspm_enabled |= ASPM_STATE_L1; + + aspm_l1ss_init(link); + + /* Save default state */ + link->aspm_default = link->aspm_enabled; + + /* Setup initial capable state. Will be updated later */ + link->aspm_capable = link->aspm_support; + + /* Get and check endpoint acceptable latencies */ + list_for_each_entry(child, &linkbus->devices, bus_list) { + if (pci_pcie_type(child) != PCI_EXP_TYPE_ENDPOINT && + pci_pcie_type(child) != PCI_EXP_TYPE_LEG_END) + continue; + + pcie_aspm_check_latency(child); + } +} + +/* Configure the ASPM L1 substates */ +static void pcie_config_aspm_l1ss(struct pcie_link_state *link, u32 state) +{ + u32 val, enable_req; + struct pci_dev *child = link->downstream, *parent = link->pdev; + + enable_req = (link->aspm_enabled ^ state) & state; + + /* + * Here are the rules specified in the PCIe spec for enabling L1SS: + * - When enabling L1.x, enable bit at parent first, then at child + * - When disabling L1.x, disable bit at child first, then at parent + * - When enabling ASPM L1.x, need to disable L1 + * (at child followed by parent). + * - The ASPM/PCIPM L1.2 must be disabled while programming timing + * parameters + * + * To keep it simple, disable all L1SS bits first, and later enable + * what is needed. + */ + + /* Disable all L1 substates */ + pci_clear_and_set_dword(child, child->l1ss + PCI_L1SS_CTL1, + PCI_L1SS_CTL1_L1SS_MASK, 0); + pci_clear_and_set_dword(parent, parent->l1ss + PCI_L1SS_CTL1, + PCI_L1SS_CTL1_L1SS_MASK, 0); + /* + * If needed, disable L1, and it gets enabled later + * in pcie_config_aspm_link(). + */ + if (enable_req & (ASPM_STATE_L1_1 | ASPM_STATE_L1_2)) { + pcie_capability_clear_and_set_word(child, PCI_EXP_LNKCTL, + PCI_EXP_LNKCTL_ASPM_L1, 0); + pcie_capability_clear_and_set_word(parent, PCI_EXP_LNKCTL, + PCI_EXP_LNKCTL_ASPM_L1, 0); + } + + val = 0; + if (state & ASPM_STATE_L1_1) + val |= PCI_L1SS_CTL1_ASPM_L1_1; + if (state & ASPM_STATE_L1_2) + val |= PCI_L1SS_CTL1_ASPM_L1_2; + if (state & ASPM_STATE_L1_1_PCIPM) + val |= PCI_L1SS_CTL1_PCIPM_L1_1; + if (state & ASPM_STATE_L1_2_PCIPM) + val |= PCI_L1SS_CTL1_PCIPM_L1_2; + + /* Enable what we need to enable */ + pci_clear_and_set_dword(parent, parent->l1ss + PCI_L1SS_CTL1, + PCI_L1SS_CTL1_L1SS_MASK, val); + pci_clear_and_set_dword(child, child->l1ss + PCI_L1SS_CTL1, + PCI_L1SS_CTL1_L1SS_MASK, val); +} + +static void pcie_config_aspm_dev(struct pci_dev *pdev, u32 val) +{ + pcie_capability_clear_and_set_word(pdev, PCI_EXP_LNKCTL, + PCI_EXP_LNKCTL_ASPMC, val); +} + +static void pcie_config_aspm_link(struct pcie_link_state *link, u32 state) +{ + u32 upstream = 0, dwstream = 0; + struct pci_dev *child = link->downstream, *parent = link->pdev; + struct pci_bus *linkbus = parent->subordinate; + + /* Enable only the states that were not explicitly disabled */ + state &= (link->aspm_capable & ~link->aspm_disable); + + /* Can't enable any substates if L1 is not enabled */ + if (!(state & ASPM_STATE_L1)) + state &= ~ASPM_STATE_L1SS; + + /* Spec says both ports must be in D0 before enabling PCI PM substates*/ + if (parent->current_state != PCI_D0 || child->current_state != PCI_D0) { + state &= ~ASPM_STATE_L1_SS_PCIPM; + state |= (link->aspm_enabled & ASPM_STATE_L1_SS_PCIPM); + } + + /* Nothing to do if the link is already in the requested state */ + if (link->aspm_enabled == state) + return; + /* Convert ASPM state to upstream/downstream ASPM register state */ + if (state & ASPM_STATE_L0S_UP) + dwstream |= PCI_EXP_LNKCTL_ASPM_L0S; + if (state & ASPM_STATE_L0S_DW) + upstream |= PCI_EXP_LNKCTL_ASPM_L0S; + if (state & ASPM_STATE_L1) { + upstream |= PCI_EXP_LNKCTL_ASPM_L1; + dwstream |= PCI_EXP_LNKCTL_ASPM_L1; + } + + if (link->aspm_capable & ASPM_STATE_L1SS) + pcie_config_aspm_l1ss(link, state); + + /* + * Spec 2.0 suggests all functions should be configured the + * same setting for ASPM. Enabling ASPM L1 should be done in + * upstream component first and then downstream, and vice + * versa for disabling ASPM L1. Spec doesn't mention L0S. + */ + if (state & ASPM_STATE_L1) + pcie_config_aspm_dev(parent, upstream); + list_for_each_entry(child, &linkbus->devices, bus_list) + pcie_config_aspm_dev(child, dwstream); + if (!(state & ASPM_STATE_L1)) + pcie_config_aspm_dev(parent, upstream); + + link->aspm_enabled = state; +} + +static void pcie_config_aspm_path(struct pcie_link_state *link) +{ + while (link) { + pcie_config_aspm_link(link, policy_to_aspm_state(link)); + link = link->parent; + } +} + +static void free_link_state(struct pcie_link_state *link) +{ + link->pdev->link_state = NULL; + kfree(link); +} + +static int pcie_aspm_sanity_check(struct pci_dev *pdev) +{ + struct pci_dev *child; + u32 reg32; + + /* + * Some functions in a slot might not all be PCIe functions, + * very strange. Disable ASPM for the whole slot + */ + list_for_each_entry(child, &pdev->subordinate->devices, bus_list) { + if (!pci_is_pcie(child)) + return -EINVAL; + + /* + * If ASPM is disabled then we're not going to change + * the BIOS state. It's safe to continue even if it's a + * pre-1.1 device + */ + + if (aspm_disabled) + continue; + + /* + * Disable ASPM for pre-1.1 PCIe device, we follow MS to use + * RBER bit to determine if a function is 1.1 version device + */ + pcie_capability_read_dword(child, PCI_EXP_DEVCAP, ®32); + if (!(reg32 & PCI_EXP_DEVCAP_RBER) && !aspm_force) { + pci_info(child, "disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'\n"); + return -EINVAL; + } + } + return 0; +} + +static struct pcie_link_state *alloc_pcie_link_state(struct pci_dev *pdev) +{ + struct pcie_link_state *link; + + link = kzalloc(sizeof(*link), GFP_KERNEL); + if (!link) + return NULL; + + INIT_LIST_HEAD(&link->sibling); + link->pdev = pdev; + link->downstream = pci_function_0(pdev->subordinate); + + /* + * Root Ports and PCI/PCI-X to PCIe Bridges are roots of PCIe + * hierarchies. Note that some PCIe host implementations omit + * the root ports entirely, in which case a downstream port on + * a switch may become the root of the link state chain for all + * its subordinate endpoints. + */ + if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT || + pci_pcie_type(pdev) == PCI_EXP_TYPE_PCIE_BRIDGE || + !pdev->bus->parent->self) { + link->root = link; + } else { + struct pcie_link_state *parent; + + parent = pdev->bus->parent->self->link_state; + if (!parent) { + kfree(link); + return NULL; + } + + link->parent = parent; + link->root = link->parent->root; + } + + list_add(&link->sibling, &link_list); + pdev->link_state = link; + return link; +} + +static void pcie_aspm_update_sysfs_visibility(struct pci_dev *pdev) +{ + struct pci_dev *child; + + list_for_each_entry(child, &pdev->subordinate->devices, bus_list) + sysfs_update_group(&child->dev.kobj, &aspm_ctrl_attr_group); +} + +/* + * pcie_aspm_init_link_state: Initiate PCI express link state. + * It is called after the pcie and its children devices are scanned. + * @pdev: the root port or switch downstream port + */ +void pcie_aspm_init_link_state(struct pci_dev *pdev) +{ + struct pcie_link_state *link; + int blacklist = !!pcie_aspm_sanity_check(pdev); + + if (!aspm_support_enabled) + return; + + if (pdev->link_state) + return; + + /* + * We allocate pcie_link_state for the component on the upstream + * end of a Link, so there's nothing to do unless this device is + * downstream port. + */ + if (!pcie_downstream_port(pdev)) + return; + + /* VIA has a strange chipset, root port is under a bridge */ + if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT && + pdev->bus->self) + return; + + down_read(&pci_bus_sem); + if (list_empty(&pdev->subordinate->devices)) + goto out; + + mutex_lock(&aspm_lock); + link = alloc_pcie_link_state(pdev); + if (!link) + goto unlock; + /* + * Setup initial ASPM state. Note that we need to configure + * upstream links also because capable state of them can be + * update through pcie_aspm_cap_init(). + */ + pcie_aspm_cap_init(link, blacklist); + + /* Setup initial Clock PM state */ + pcie_clkpm_cap_init(link, blacklist); + + /* + * At this stage drivers haven't had an opportunity to change the + * link policy setting. Enabling ASPM on broken hardware can cripple + * it even before the driver has had a chance to disable ASPM, so + * default to a safe level right now. If we're enabling ASPM beyond + * the BIOS's expectation, we'll do so once pci_enable_device() is + * called. + */ + if (aspm_policy != POLICY_POWERSAVE && + aspm_policy != POLICY_POWER_SUPERSAVE) { + pcie_config_aspm_path(link); + pcie_set_clkpm(link, policy_to_clkpm_state(link)); + } + + pcie_aspm_update_sysfs_visibility(pdev); + +unlock: + mutex_unlock(&aspm_lock); +out: + up_read(&pci_bus_sem); +} + +/* Recheck latencies and update aspm_capable for links under the root */ +static void pcie_update_aspm_capable(struct pcie_link_state *root) +{ + struct pcie_link_state *link; + BUG_ON(root->parent); + list_for_each_entry(link, &link_list, sibling) { + if (link->root != root) + continue; + link->aspm_capable = link->aspm_support; + } + list_for_each_entry(link, &link_list, sibling) { + struct pci_dev *child; + struct pci_bus *linkbus = link->pdev->subordinate; + if (link->root != root) + continue; + list_for_each_entry(child, &linkbus->devices, bus_list) { + if ((pci_pcie_type(child) != PCI_EXP_TYPE_ENDPOINT) && + (pci_pcie_type(child) != PCI_EXP_TYPE_LEG_END)) + continue; + pcie_aspm_check_latency(child); + } + } +} + +/* @pdev: the endpoint device */ +void pcie_aspm_exit_link_state(struct pci_dev *pdev) +{ + struct pci_dev *parent = pdev->bus->self; + struct pcie_link_state *link, *root, *parent_link; + + if (!parent || !parent->link_state) + return; + + down_read(&pci_bus_sem); + mutex_lock(&aspm_lock); + + link = parent->link_state; + root = link->root; + parent_link = link->parent; + + /* + * link->downstream is a pointer to the pci_dev of function 0. If + * we remove that function, the pci_dev is about to be deallocated, + * so we can't use link->downstream again. Free the link state to + * avoid this. + * + * If we're removing a non-0 function, it's possible we could + * retain the link state, but PCIe r6.0, sec 7.5.3.7, recommends + * programming the same ASPM Control value for all functions of + * multi-function devices, so disable ASPM for all of them. + */ + pcie_config_aspm_link(link, 0); + list_del(&link->sibling); + free_link_state(link); + + /* Recheck latencies and configure upstream links */ + if (parent_link) { + pcie_update_aspm_capable(root); + pcie_config_aspm_path(parent_link); + } + + mutex_unlock(&aspm_lock); + up_read(&pci_bus_sem); +} + +/* @pdev: the root port or switch downstream port */ +void pcie_aspm_pm_state_change(struct pci_dev *pdev) +{ + struct pcie_link_state *link = pdev->link_state; + + if (aspm_disabled || !link) + return; + /* + * Devices changed PM state, we should recheck if latency + * meets all functions' requirement + */ + down_read(&pci_bus_sem); + mutex_lock(&aspm_lock); + pcie_update_aspm_capable(link->root); + pcie_config_aspm_path(link); + mutex_unlock(&aspm_lock); + up_read(&pci_bus_sem); +} + +void pcie_aspm_powersave_config_link(struct pci_dev *pdev) +{ + struct pcie_link_state *link = pdev->link_state; + + if (aspm_disabled || !link) + return; + + if (aspm_policy != POLICY_POWERSAVE && + aspm_policy != POLICY_POWER_SUPERSAVE) + return; + + down_read(&pci_bus_sem); + mutex_lock(&aspm_lock); + pcie_config_aspm_path(link); + pcie_set_clkpm(link, policy_to_clkpm_state(link)); + mutex_unlock(&aspm_lock); + up_read(&pci_bus_sem); +} + +static struct pcie_link_state *pcie_aspm_get_link(struct pci_dev *pdev) +{ + struct pci_dev *bridge; + + if (!pci_is_pcie(pdev)) + return NULL; + + bridge = pci_upstream_bridge(pdev); + if (!bridge || !pci_is_pcie(bridge)) + return NULL; + + return bridge->link_state; +} + +static int __pci_disable_link_state(struct pci_dev *pdev, int state, bool sem) +{ + struct pcie_link_state *link = pcie_aspm_get_link(pdev); + + if (!link) + return -EINVAL; + /* + * A driver requested that ASPM be disabled on this device, but + * if we don't have permission to manage ASPM (e.g., on ACPI + * systems we have to observe the FADT ACPI_FADT_NO_ASPM bit and + * the _OSC method), we can't honor that request. Windows has + * a similar mechanism using "PciASPMOptOut", which is also + * ignored in this situation. + */ + if (aspm_disabled) { + pci_warn(pdev, "can't disable ASPM; OS doesn't have ASPM control\n"); + return -EPERM; + } + + if (sem) + down_read(&pci_bus_sem); + mutex_lock(&aspm_lock); + if (state & PCIE_LINK_STATE_L0S) + link->aspm_disable |= ASPM_STATE_L0S; + if (state & PCIE_LINK_STATE_L1) + /* L1 PM substates require L1 */ + link->aspm_disable |= ASPM_STATE_L1 | ASPM_STATE_L1SS; + if (state & PCIE_LINK_STATE_L1_1) + link->aspm_disable |= ASPM_STATE_L1_1; + if (state & PCIE_LINK_STATE_L1_2) + link->aspm_disable |= ASPM_STATE_L1_2; + if (state & PCIE_LINK_STATE_L1_1_PCIPM) + link->aspm_disable |= ASPM_STATE_L1_1_PCIPM; + if (state & PCIE_LINK_STATE_L1_2_PCIPM) + link->aspm_disable |= ASPM_STATE_L1_2_PCIPM; + pcie_config_aspm_link(link, policy_to_aspm_state(link)); + + if (state & PCIE_LINK_STATE_CLKPM) + link->clkpm_disable = 1; + pcie_set_clkpm(link, policy_to_clkpm_state(link)); + mutex_unlock(&aspm_lock); + if (sem) + up_read(&pci_bus_sem); + + return 0; +} + +int pci_disable_link_state_locked(struct pci_dev *pdev, int state) +{ + return __pci_disable_link_state(pdev, state, false); +} +EXPORT_SYMBOL(pci_disable_link_state_locked); + +/** + * pci_disable_link_state - Disable device's link state, so the link will + * never enter specific states. Note that if the BIOS didn't grant ASPM + * control to the OS, this does nothing because we can't touch the LNKCTL + * register. Returns 0 or a negative errno. + * + * @pdev: PCI device + * @state: ASPM link state to disable + */ +int pci_disable_link_state(struct pci_dev *pdev, int state) +{ + return __pci_disable_link_state(pdev, state, true); +} +EXPORT_SYMBOL(pci_disable_link_state); + +static int pcie_aspm_set_policy(const char *val, + const struct kernel_param *kp) +{ + int i; + struct pcie_link_state *link; + + if (aspm_disabled) + return -EPERM; + i = sysfs_match_string(policy_str, val); + if (i < 0) + return i; + if (i == aspm_policy) + return 0; + + down_read(&pci_bus_sem); + mutex_lock(&aspm_lock); + aspm_policy = i; + list_for_each_entry(link, &link_list, sibling) { + pcie_config_aspm_link(link, policy_to_aspm_state(link)); + pcie_set_clkpm(link, policy_to_clkpm_state(link)); + } + mutex_unlock(&aspm_lock); + up_read(&pci_bus_sem); + return 0; +} + +static int pcie_aspm_get_policy(char *buffer, const struct kernel_param *kp) +{ + int i, cnt = 0; + for (i = 0; i < ARRAY_SIZE(policy_str); i++) + if (i == aspm_policy) + cnt += sprintf(buffer + cnt, "[%s] ", policy_str[i]); + else + cnt += sprintf(buffer + cnt, "%s ", policy_str[i]); + cnt += sprintf(buffer + cnt, "\n"); + return cnt; +} + +module_param_call(policy, pcie_aspm_set_policy, pcie_aspm_get_policy, + NULL, 0644); + +/** + * pcie_aspm_enabled - Check if PCIe ASPM has been enabled for a device. + * @pdev: Target device. + * + * Relies on the upstream bridge's link_state being valid. The link_state + * is deallocated only when the last child of the bridge (i.e., @pdev or a + * sibling) is removed, and the caller should be holding a reference to + * @pdev, so this should be safe. + */ +bool pcie_aspm_enabled(struct pci_dev *pdev) +{ + struct pcie_link_state *link = pcie_aspm_get_link(pdev); + + if (!link) + return false; + + return link->aspm_enabled; +} +EXPORT_SYMBOL_GPL(pcie_aspm_enabled); + +static ssize_t aspm_attr_show_common(struct device *dev, + struct device_attribute *attr, + char *buf, u8 state) +{ + struct pci_dev *pdev = to_pci_dev(dev); + struct pcie_link_state *link = pcie_aspm_get_link(pdev); + + return sysfs_emit(buf, "%d\n", (link->aspm_enabled & state) ? 1 : 0); +} + +static ssize_t aspm_attr_store_common(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len, u8 state) +{ + struct pci_dev *pdev = to_pci_dev(dev); + struct pcie_link_state *link = pcie_aspm_get_link(pdev); + bool state_enable; + + if (kstrtobool(buf, &state_enable) < 0) + return -EINVAL; + + down_read(&pci_bus_sem); + mutex_lock(&aspm_lock); + + if (state_enable) { + link->aspm_disable &= ~state; + /* need to enable L1 for substates */ + if (state & ASPM_STATE_L1SS) + link->aspm_disable &= ~ASPM_STATE_L1; + } else { + link->aspm_disable |= state; + if (state & ASPM_STATE_L1) + link->aspm_disable |= ASPM_STATE_L1SS; + } + + pcie_config_aspm_link(link, policy_to_aspm_state(link)); + + mutex_unlock(&aspm_lock); + up_read(&pci_bus_sem); + + return len; +} + +#define ASPM_ATTR(_f, _s) \ +static ssize_t _f##_show(struct device *dev, \ + struct device_attribute *attr, char *buf) \ +{ return aspm_attr_show_common(dev, attr, buf, ASPM_STATE_##_s); } \ + \ +static ssize_t _f##_store(struct device *dev, \ + struct device_attribute *attr, \ + const char *buf, size_t len) \ +{ return aspm_attr_store_common(dev, attr, buf, len, ASPM_STATE_##_s); } + +ASPM_ATTR(l0s_aspm, L0S) +ASPM_ATTR(l1_aspm, L1) +ASPM_ATTR(l1_1_aspm, L1_1) +ASPM_ATTR(l1_2_aspm, L1_2) +ASPM_ATTR(l1_1_pcipm, L1_1_PCIPM) +ASPM_ATTR(l1_2_pcipm, L1_2_PCIPM) + +static ssize_t clkpm_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct pci_dev *pdev = to_pci_dev(dev); + struct pcie_link_state *link = pcie_aspm_get_link(pdev); + + return sysfs_emit(buf, "%d\n", link->clkpm_enabled); +} + +static ssize_t clkpm_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct pci_dev *pdev = to_pci_dev(dev); + struct pcie_link_state *link = pcie_aspm_get_link(pdev); + bool state_enable; + + if (kstrtobool(buf, &state_enable) < 0) + return -EINVAL; + + down_read(&pci_bus_sem); + mutex_lock(&aspm_lock); + + link->clkpm_disable = !state_enable; + pcie_set_clkpm(link, policy_to_clkpm_state(link)); + + mutex_unlock(&aspm_lock); + up_read(&pci_bus_sem); + + return len; +} + +static DEVICE_ATTR_RW(clkpm); +static DEVICE_ATTR_RW(l0s_aspm); +static DEVICE_ATTR_RW(l1_aspm); +static DEVICE_ATTR_RW(l1_1_aspm); +static DEVICE_ATTR_RW(l1_2_aspm); +static DEVICE_ATTR_RW(l1_1_pcipm); +static DEVICE_ATTR_RW(l1_2_pcipm); + +static struct attribute *aspm_ctrl_attrs[] = { + &dev_attr_clkpm.attr, + &dev_attr_l0s_aspm.attr, + &dev_attr_l1_aspm.attr, + &dev_attr_l1_1_aspm.attr, + &dev_attr_l1_2_aspm.attr, + &dev_attr_l1_1_pcipm.attr, + &dev_attr_l1_2_pcipm.attr, + NULL +}; + +static umode_t aspm_ctrl_attrs_are_visible(struct kobject *kobj, + struct attribute *a, int n) +{ + struct device *dev = kobj_to_dev(kobj); + struct pci_dev *pdev = to_pci_dev(dev); + struct pcie_link_state *link = pcie_aspm_get_link(pdev); + static const u8 aspm_state_map[] = { + ASPM_STATE_L0S, + ASPM_STATE_L1, + ASPM_STATE_L1_1, + ASPM_STATE_L1_2, + ASPM_STATE_L1_1_PCIPM, + ASPM_STATE_L1_2_PCIPM, + }; + + if (aspm_disabled || !link) + return 0; + + if (n == 0) + return link->clkpm_capable ? a->mode : 0; + + return link->aspm_capable & aspm_state_map[n - 1] ? a->mode : 0; +} + +const struct attribute_group aspm_ctrl_attr_group = { + .name = "link", + .attrs = aspm_ctrl_attrs, + .is_visible = aspm_ctrl_attrs_are_visible, +}; + +static int __init pcie_aspm_disable(char *str) +{ + if (!strcmp(str, "off")) { + aspm_policy = POLICY_DEFAULT; + aspm_disabled = 1; + aspm_support_enabled = false; + printk(KERN_INFO "PCIe ASPM is disabled\n"); + } else if (!strcmp(str, "force")) { + aspm_force = 1; + printk(KERN_INFO "PCIe ASPM is forcibly enabled\n"); + } + return 1; +} + +__setup("pcie_aspm=", pcie_aspm_disable); + +void pcie_no_aspm(void) +{ + /* + * Disabling ASPM is intended to prevent the kernel from modifying + * existing hardware state, not to clear existing state. To that end: + * (a) set policy to POLICY_DEFAULT in order to avoid changing state + * (b) prevent userspace from changing policy + */ + if (!aspm_force) { + aspm_policy = POLICY_DEFAULT; + aspm_disabled = 1; + } +} + +bool pcie_aspm_support_enabled(void) +{ + return aspm_support_enabled; +} -- cgit v1.2.3