From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/scsi/scsi_lib.c | 3325 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 3325 insertions(+) create mode 100644 drivers/scsi/scsi_lib.c (limited to 'drivers/scsi/scsi_lib.c') diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c new file mode 100644 index 000000000..d25e1c247 --- /dev/null +++ b/drivers/scsi/scsi_lib.c @@ -0,0 +1,3325 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 1999 Eric Youngdale + * Copyright (C) 2014 Christoph Hellwig + * + * SCSI queueing library. + * Initial versions: Eric Youngdale (eric@andante.org). + * Based upon conversations with large numbers + * of people at Linux Expo. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include /* __scsi_init_queue() */ +#include + +#include + +#include "scsi_debugfs.h" +#include "scsi_priv.h" +#include "scsi_logging.h" + +/* + * Size of integrity metadata is usually small, 1 inline sg should + * cover normal cases. + */ +#ifdef CONFIG_ARCH_NO_SG_CHAIN +#define SCSI_INLINE_PROT_SG_CNT 0 +#define SCSI_INLINE_SG_CNT 0 +#else +#define SCSI_INLINE_PROT_SG_CNT 1 +#define SCSI_INLINE_SG_CNT 2 +#endif + +static struct kmem_cache *scsi_sense_cache; +static DEFINE_MUTEX(scsi_sense_cache_mutex); + +static void scsi_mq_uninit_cmd(struct scsi_cmnd *cmd); + +int scsi_init_sense_cache(struct Scsi_Host *shost) +{ + int ret = 0; + + mutex_lock(&scsi_sense_cache_mutex); + if (!scsi_sense_cache) { + scsi_sense_cache = + kmem_cache_create_usercopy("scsi_sense_cache", + SCSI_SENSE_BUFFERSIZE, 0, SLAB_HWCACHE_ALIGN, + 0, SCSI_SENSE_BUFFERSIZE, NULL); + if (!scsi_sense_cache) + ret = -ENOMEM; + } + mutex_unlock(&scsi_sense_cache_mutex); + return ret; +} + +static void +scsi_set_blocked(struct scsi_cmnd *cmd, int reason) +{ + struct Scsi_Host *host = cmd->device->host; + struct scsi_device *device = cmd->device; + struct scsi_target *starget = scsi_target(device); + + /* + * Set the appropriate busy bit for the device/host. + * + * If the host/device isn't busy, assume that something actually + * completed, and that we should be able to queue a command now. + * + * Note that the prior mid-layer assumption that any host could + * always queue at least one command is now broken. The mid-layer + * will implement a user specifiable stall (see + * scsi_host.max_host_blocked and scsi_device.max_device_blocked) + * if a command is requeued with no other commands outstanding + * either for the device or for the host. + */ + switch (reason) { + case SCSI_MLQUEUE_HOST_BUSY: + atomic_set(&host->host_blocked, host->max_host_blocked); + break; + case SCSI_MLQUEUE_DEVICE_BUSY: + case SCSI_MLQUEUE_EH_RETRY: + atomic_set(&device->device_blocked, + device->max_device_blocked); + break; + case SCSI_MLQUEUE_TARGET_BUSY: + atomic_set(&starget->target_blocked, + starget->max_target_blocked); + break; + } +} + +static void scsi_mq_requeue_cmd(struct scsi_cmnd *cmd, unsigned long msecs) +{ + struct request *rq = scsi_cmd_to_rq(cmd); + + if (rq->rq_flags & RQF_DONTPREP) { + rq->rq_flags &= ~RQF_DONTPREP; + scsi_mq_uninit_cmd(cmd); + } else { + WARN_ON_ONCE(true); + } + + if (msecs) { + blk_mq_requeue_request(rq, false); + blk_mq_delay_kick_requeue_list(rq->q, msecs); + } else + blk_mq_requeue_request(rq, true); +} + +/** + * __scsi_queue_insert - private queue insertion + * @cmd: The SCSI command being requeued + * @reason: The reason for the requeue + * @unbusy: Whether the queue should be unbusied + * + * This is a private queue insertion. The public interface + * scsi_queue_insert() always assumes the queue should be unbusied + * because it's always called before the completion. This function is + * for a requeue after completion, which should only occur in this + * file. + */ +static void __scsi_queue_insert(struct scsi_cmnd *cmd, int reason, bool unbusy) +{ + struct scsi_device *device = cmd->device; + + SCSI_LOG_MLQUEUE(1, scmd_printk(KERN_INFO, cmd, + "Inserting command %p into mlqueue\n", cmd)); + + scsi_set_blocked(cmd, reason); + + /* + * Decrement the counters, since these commands are no longer + * active on the host/device. + */ + if (unbusy) + scsi_device_unbusy(device, cmd); + + /* + * Requeue this command. It will go before all other commands + * that are already in the queue. Schedule requeue work under + * lock such that the kblockd_schedule_work() call happens + * before blk_mq_destroy_queue() finishes. + */ + cmd->result = 0; + + blk_mq_requeue_request(scsi_cmd_to_rq(cmd), true); +} + +/** + * scsi_queue_insert - Reinsert a command in the queue. + * @cmd: command that we are adding to queue. + * @reason: why we are inserting command to queue. + * + * We do this for one of two cases. Either the host is busy and it cannot accept + * any more commands for the time being, or the device returned QUEUE_FULL and + * can accept no more commands. + * + * Context: This could be called either from an interrupt context or a normal + * process context. + */ +void scsi_queue_insert(struct scsi_cmnd *cmd, int reason) +{ + __scsi_queue_insert(cmd, reason, true); +} + + +/** + * __scsi_execute - insert request and wait for the result + * @sdev: scsi device + * @cmd: scsi command + * @data_direction: data direction + * @buffer: data buffer + * @bufflen: len of buffer + * @sense: optional sense buffer + * @sshdr: optional decoded sense header + * @timeout: request timeout in HZ + * @retries: number of times to retry request + * @flags: flags for ->cmd_flags + * @rq_flags: flags for ->rq_flags + * @resid: optional residual length + * + * Returns the scsi_cmnd result field if a command was executed, or a negative + * Linux error code if we didn't get that far. + */ +int __scsi_execute(struct scsi_device *sdev, const unsigned char *cmd, + int data_direction, void *buffer, unsigned bufflen, + unsigned char *sense, struct scsi_sense_hdr *sshdr, + int timeout, int retries, blk_opf_t flags, + req_flags_t rq_flags, int *resid) +{ + struct request *req; + struct scsi_cmnd *scmd; + int ret; + + req = scsi_alloc_request(sdev->request_queue, + data_direction == DMA_TO_DEVICE ? + REQ_OP_DRV_OUT : REQ_OP_DRV_IN, + rq_flags & RQF_PM ? BLK_MQ_REQ_PM : 0); + if (IS_ERR(req)) + return PTR_ERR(req); + + if (bufflen) { + ret = blk_rq_map_kern(sdev->request_queue, req, + buffer, bufflen, GFP_NOIO); + if (ret) + goto out; + } + scmd = blk_mq_rq_to_pdu(req); + scmd->cmd_len = COMMAND_SIZE(cmd[0]); + memcpy(scmd->cmnd, cmd, scmd->cmd_len); + scmd->allowed = retries; + req->timeout = timeout; + req->cmd_flags |= flags; + req->rq_flags |= rq_flags | RQF_QUIET; + + /* + * head injection *required* here otherwise quiesce won't work + */ + blk_execute_rq(req, true); + + /* + * Some devices (USB mass-storage in particular) may transfer + * garbage data together with a residue indicating that the data + * is invalid. Prevent the garbage from being misinterpreted + * and prevent security leaks by zeroing out the excess data. + */ + if (unlikely(scmd->resid_len > 0 && scmd->resid_len <= bufflen)) + memset(buffer + bufflen - scmd->resid_len, 0, scmd->resid_len); + + if (resid) + *resid = scmd->resid_len; + if (sense && scmd->sense_len) + memcpy(sense, scmd->sense_buffer, SCSI_SENSE_BUFFERSIZE); + if (sshdr) + scsi_normalize_sense(scmd->sense_buffer, scmd->sense_len, + sshdr); + ret = scmd->result; + out: + blk_mq_free_request(req); + + return ret; +} +EXPORT_SYMBOL(__scsi_execute); + +/* + * Wake up the error handler if necessary. Avoid as follows that the error + * handler is not woken up if host in-flight requests number == + * shost->host_failed: use call_rcu() in scsi_eh_scmd_add() in combination + * with an RCU read lock in this function to ensure that this function in + * its entirety either finishes before scsi_eh_scmd_add() increases the + * host_failed counter or that it notices the shost state change made by + * scsi_eh_scmd_add(). + */ +static void scsi_dec_host_busy(struct Scsi_Host *shost, struct scsi_cmnd *cmd) +{ + unsigned long flags; + + rcu_read_lock(); + __clear_bit(SCMD_STATE_INFLIGHT, &cmd->state); + if (unlikely(scsi_host_in_recovery(shost))) { + spin_lock_irqsave(shost->host_lock, flags); + if (shost->host_failed || shost->host_eh_scheduled) + scsi_eh_wakeup(shost); + spin_unlock_irqrestore(shost->host_lock, flags); + } + rcu_read_unlock(); +} + +void scsi_device_unbusy(struct scsi_device *sdev, struct scsi_cmnd *cmd) +{ + struct Scsi_Host *shost = sdev->host; + struct scsi_target *starget = scsi_target(sdev); + + scsi_dec_host_busy(shost, cmd); + + if (starget->can_queue > 0) + atomic_dec(&starget->target_busy); + + sbitmap_put(&sdev->budget_map, cmd->budget_token); + cmd->budget_token = -1; +} + +static void scsi_kick_queue(struct request_queue *q) +{ + blk_mq_run_hw_queues(q, false); +} + +/* + * Called for single_lun devices on IO completion. Clear starget_sdev_user, + * and call blk_run_queue for all the scsi_devices on the target - + * including current_sdev first. + * + * Called with *no* scsi locks held. + */ +static void scsi_single_lun_run(struct scsi_device *current_sdev) +{ + struct Scsi_Host *shost = current_sdev->host; + struct scsi_device *sdev, *tmp; + struct scsi_target *starget = scsi_target(current_sdev); + unsigned long flags; + + spin_lock_irqsave(shost->host_lock, flags); + starget->starget_sdev_user = NULL; + spin_unlock_irqrestore(shost->host_lock, flags); + + /* + * Call blk_run_queue for all LUNs on the target, starting with + * current_sdev. We race with others (to set starget_sdev_user), + * but in most cases, we will be first. Ideally, each LU on the + * target would get some limited time or requests on the target. + */ + scsi_kick_queue(current_sdev->request_queue); + + spin_lock_irqsave(shost->host_lock, flags); + if (starget->starget_sdev_user) + goto out; + list_for_each_entry_safe(sdev, tmp, &starget->devices, + same_target_siblings) { + if (sdev == current_sdev) + continue; + if (scsi_device_get(sdev)) + continue; + + spin_unlock_irqrestore(shost->host_lock, flags); + scsi_kick_queue(sdev->request_queue); + spin_lock_irqsave(shost->host_lock, flags); + + scsi_device_put(sdev); + } + out: + spin_unlock_irqrestore(shost->host_lock, flags); +} + +static inline bool scsi_device_is_busy(struct scsi_device *sdev) +{ + if (scsi_device_busy(sdev) >= sdev->queue_depth) + return true; + if (atomic_read(&sdev->device_blocked) > 0) + return true; + return false; +} + +static inline bool scsi_target_is_busy(struct scsi_target *starget) +{ + if (starget->can_queue > 0) { + if (atomic_read(&starget->target_busy) >= starget->can_queue) + return true; + if (atomic_read(&starget->target_blocked) > 0) + return true; + } + return false; +} + +static inline bool scsi_host_is_busy(struct Scsi_Host *shost) +{ + if (atomic_read(&shost->host_blocked) > 0) + return true; + if (shost->host_self_blocked) + return true; + return false; +} + +static void scsi_starved_list_run(struct Scsi_Host *shost) +{ + LIST_HEAD(starved_list); + struct scsi_device *sdev; + unsigned long flags; + + spin_lock_irqsave(shost->host_lock, flags); + list_splice_init(&shost->starved_list, &starved_list); + + while (!list_empty(&starved_list)) { + struct request_queue *slq; + + /* + * As long as shost is accepting commands and we have + * starved queues, call blk_run_queue. scsi_request_fn + * drops the queue_lock and can add us back to the + * starved_list. + * + * host_lock protects the starved_list and starved_entry. + * scsi_request_fn must get the host_lock before checking + * or modifying starved_list or starved_entry. + */ + if (scsi_host_is_busy(shost)) + break; + + sdev = list_entry(starved_list.next, + struct scsi_device, starved_entry); + list_del_init(&sdev->starved_entry); + if (scsi_target_is_busy(scsi_target(sdev))) { + list_move_tail(&sdev->starved_entry, + &shost->starved_list); + continue; + } + + /* + * Once we drop the host lock, a racing scsi_remove_device() + * call may remove the sdev from the starved list and destroy + * it and the queue. Mitigate by taking a reference to the + * queue and never touching the sdev again after we drop the + * host lock. Note: if __scsi_remove_device() invokes + * blk_mq_destroy_queue() before the queue is run from this + * function then blk_run_queue() will return immediately since + * blk_mq_destroy_queue() marks the queue with QUEUE_FLAG_DYING. + */ + slq = sdev->request_queue; + if (!blk_get_queue(slq)) + continue; + spin_unlock_irqrestore(shost->host_lock, flags); + + scsi_kick_queue(slq); + blk_put_queue(slq); + + spin_lock_irqsave(shost->host_lock, flags); + } + /* put any unprocessed entries back */ + list_splice(&starved_list, &shost->starved_list); + spin_unlock_irqrestore(shost->host_lock, flags); +} + +/** + * scsi_run_queue - Select a proper request queue to serve next. + * @q: last request's queue + * + * The previous command was completely finished, start a new one if possible. + */ +static void scsi_run_queue(struct request_queue *q) +{ + struct scsi_device *sdev = q->queuedata; + + if (scsi_target(sdev)->single_lun) + scsi_single_lun_run(sdev); + if (!list_empty(&sdev->host->starved_list)) + scsi_starved_list_run(sdev->host); + + blk_mq_run_hw_queues(q, false); +} + +void scsi_requeue_run_queue(struct work_struct *work) +{ + struct scsi_device *sdev; + struct request_queue *q; + + sdev = container_of(work, struct scsi_device, requeue_work); + q = sdev->request_queue; + scsi_run_queue(q); +} + +void scsi_run_host_queues(struct Scsi_Host *shost) +{ + struct scsi_device *sdev; + + shost_for_each_device(sdev, shost) + scsi_run_queue(sdev->request_queue); +} + +static void scsi_uninit_cmd(struct scsi_cmnd *cmd) +{ + if (!blk_rq_is_passthrough(scsi_cmd_to_rq(cmd))) { + struct scsi_driver *drv = scsi_cmd_to_driver(cmd); + + if (drv->uninit_command) + drv->uninit_command(cmd); + } +} + +void scsi_free_sgtables(struct scsi_cmnd *cmd) +{ + if (cmd->sdb.table.nents) + sg_free_table_chained(&cmd->sdb.table, + SCSI_INLINE_SG_CNT); + if (scsi_prot_sg_count(cmd)) + sg_free_table_chained(&cmd->prot_sdb->table, + SCSI_INLINE_PROT_SG_CNT); +} +EXPORT_SYMBOL_GPL(scsi_free_sgtables); + +static void scsi_mq_uninit_cmd(struct scsi_cmnd *cmd) +{ + scsi_free_sgtables(cmd); + scsi_uninit_cmd(cmd); +} + +static void scsi_run_queue_async(struct scsi_device *sdev) +{ + if (scsi_target(sdev)->single_lun || + !list_empty(&sdev->host->starved_list)) { + kblockd_schedule_work(&sdev->requeue_work); + } else { + /* + * smp_mb() present in sbitmap_queue_clear() or implied in + * .end_io is for ordering writing .device_busy in + * scsi_device_unbusy() and reading sdev->restarts. + */ + int old = atomic_read(&sdev->restarts); + + /* + * ->restarts has to be kept as non-zero if new budget + * contention occurs. + * + * No need to run queue when either another re-run + * queue wins in updating ->restarts or a new budget + * contention occurs. + */ + if (old && atomic_cmpxchg(&sdev->restarts, old, 0) == old) + blk_mq_run_hw_queues(sdev->request_queue, true); + } +} + +/* Returns false when no more bytes to process, true if there are more */ +static bool scsi_end_request(struct request *req, blk_status_t error, + unsigned int bytes) +{ + struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(req); + struct scsi_device *sdev = cmd->device; + struct request_queue *q = sdev->request_queue; + + if (blk_update_request(req, error, bytes)) + return true; + + // XXX: + if (blk_queue_add_random(q)) + add_disk_randomness(req->q->disk); + + if (!blk_rq_is_passthrough(req)) { + WARN_ON_ONCE(!(cmd->flags & SCMD_INITIALIZED)); + cmd->flags &= ~SCMD_INITIALIZED; + } + + /* + * Calling rcu_barrier() is not necessary here because the + * SCSI error handler guarantees that the function called by + * call_rcu() has been called before scsi_end_request() is + * called. + */ + destroy_rcu_head(&cmd->rcu); + + /* + * In the MQ case the command gets freed by __blk_mq_end_request, + * so we have to do all cleanup that depends on it earlier. + * + * We also can't kick the queues from irq context, so we + * will have to defer it to a workqueue. + */ + scsi_mq_uninit_cmd(cmd); + + /* + * queue is still alive, so grab the ref for preventing it + * from being cleaned up during running queue. + */ + percpu_ref_get(&q->q_usage_counter); + + __blk_mq_end_request(req, error); + + scsi_run_queue_async(sdev); + + percpu_ref_put(&q->q_usage_counter); + return false; +} + +static inline u8 get_scsi_ml_byte(int result) +{ + return (result >> 8) & 0xff; +} + +/** + * scsi_result_to_blk_status - translate a SCSI result code into blk_status_t + * @result: scsi error code + * + * Translate a SCSI result code into a blk_status_t value. + */ +static blk_status_t scsi_result_to_blk_status(int result) +{ + /* + * Check the scsi-ml byte first in case we converted a host or status + * byte. + */ + switch (get_scsi_ml_byte(result)) { + case SCSIML_STAT_OK: + break; + case SCSIML_STAT_RESV_CONFLICT: + return BLK_STS_NEXUS; + case SCSIML_STAT_NOSPC: + return BLK_STS_NOSPC; + case SCSIML_STAT_MED_ERROR: + return BLK_STS_MEDIUM; + case SCSIML_STAT_TGT_FAILURE: + return BLK_STS_TARGET; + } + + switch (host_byte(result)) { + case DID_OK: + if (scsi_status_is_good(result)) + return BLK_STS_OK; + return BLK_STS_IOERR; + case DID_TRANSPORT_FAILFAST: + case DID_TRANSPORT_MARGINAL: + return BLK_STS_TRANSPORT; + default: + return BLK_STS_IOERR; + } +} + +/** + * scsi_rq_err_bytes - determine number of bytes till the next failure boundary + * @rq: request to examine + * + * Description: + * A request could be merge of IOs which require different failure + * handling. This function determines the number of bytes which + * can be failed from the beginning of the request without + * crossing into area which need to be retried further. + * + * Return: + * The number of bytes to fail. + */ +static unsigned int scsi_rq_err_bytes(const struct request *rq) +{ + blk_opf_t ff = rq->cmd_flags & REQ_FAILFAST_MASK; + unsigned int bytes = 0; + struct bio *bio; + + if (!(rq->rq_flags & RQF_MIXED_MERGE)) + return blk_rq_bytes(rq); + + /* + * Currently the only 'mixing' which can happen is between + * different fastfail types. We can safely fail portions + * which have all the failfast bits that the first one has - + * the ones which are at least as eager to fail as the first + * one. + */ + for (bio = rq->bio; bio; bio = bio->bi_next) { + if ((bio->bi_opf & ff) != ff) + break; + bytes += bio->bi_iter.bi_size; + } + + /* this could lead to infinite loop */ + BUG_ON(blk_rq_bytes(rq) && !bytes); + return bytes; +} + +static bool scsi_cmd_runtime_exceeced(struct scsi_cmnd *cmd) +{ + struct request *req = scsi_cmd_to_rq(cmd); + unsigned long wait_for; + + if (cmd->allowed == SCSI_CMD_RETRIES_NO_LIMIT) + return false; + + wait_for = (cmd->allowed + 1) * req->timeout; + if (time_before(cmd->jiffies_at_alloc + wait_for, jiffies)) { + scmd_printk(KERN_ERR, cmd, "timing out command, waited %lus\n", + wait_for/HZ); + return true; + } + return false; +} + +/* + * When ALUA transition state is returned, reprep the cmd to + * use the ALUA handler's transition timeout. Delay the reprep + * 1 sec to avoid aggressive retries of the target in that + * state. + */ +#define ALUA_TRANSITION_REPREP_DELAY 1000 + +/* Helper for scsi_io_completion() when special action required. */ +static void scsi_io_completion_action(struct scsi_cmnd *cmd, int result) +{ + struct request *req = scsi_cmd_to_rq(cmd); + int level = 0; + enum {ACTION_FAIL, ACTION_REPREP, ACTION_DELAYED_REPREP, + ACTION_RETRY, ACTION_DELAYED_RETRY} action; + struct scsi_sense_hdr sshdr; + bool sense_valid; + bool sense_current = true; /* false implies "deferred sense" */ + blk_status_t blk_stat; + + sense_valid = scsi_command_normalize_sense(cmd, &sshdr); + if (sense_valid) + sense_current = !scsi_sense_is_deferred(&sshdr); + + blk_stat = scsi_result_to_blk_status(result); + + if (host_byte(result) == DID_RESET) { + /* Third party bus reset or reset for error recovery + * reasons. Just retry the command and see what + * happens. + */ + action = ACTION_RETRY; + } else if (sense_valid && sense_current) { + switch (sshdr.sense_key) { + case UNIT_ATTENTION: + if (cmd->device->removable) { + /* Detected disc change. Set a bit + * and quietly refuse further access. + */ + cmd->device->changed = 1; + action = ACTION_FAIL; + } else { + /* Must have been a power glitch, or a + * bus reset. Could not have been a + * media change, so we just retry the + * command and see what happens. + */ + action = ACTION_RETRY; + } + break; + case ILLEGAL_REQUEST: + /* If we had an ILLEGAL REQUEST returned, then + * we may have performed an unsupported + * command. The only thing this should be + * would be a ten byte read where only a six + * byte read was supported. Also, on a system + * where READ CAPACITY failed, we may have + * read past the end of the disk. + */ + if ((cmd->device->use_10_for_rw && + sshdr.asc == 0x20 && sshdr.ascq == 0x00) && + (cmd->cmnd[0] == READ_10 || + cmd->cmnd[0] == WRITE_10)) { + /* This will issue a new 6-byte command. */ + cmd->device->use_10_for_rw = 0; + action = ACTION_REPREP; + } else if (sshdr.asc == 0x10) /* DIX */ { + action = ACTION_FAIL; + blk_stat = BLK_STS_PROTECTION; + /* INVALID COMMAND OPCODE or INVALID FIELD IN CDB */ + } else if (sshdr.asc == 0x20 || sshdr.asc == 0x24) { + action = ACTION_FAIL; + blk_stat = BLK_STS_TARGET; + } else + action = ACTION_FAIL; + break; + case ABORTED_COMMAND: + action = ACTION_FAIL; + if (sshdr.asc == 0x10) /* DIF */ + blk_stat = BLK_STS_PROTECTION; + break; + case NOT_READY: + /* If the device is in the process of becoming + * ready, or has a temporary blockage, retry. + */ + if (sshdr.asc == 0x04) { + switch (sshdr.ascq) { + case 0x01: /* becoming ready */ + case 0x04: /* format in progress */ + case 0x05: /* rebuild in progress */ + case 0x06: /* recalculation in progress */ + case 0x07: /* operation in progress */ + case 0x08: /* Long write in progress */ + case 0x09: /* self test in progress */ + case 0x11: /* notify (enable spinup) required */ + case 0x14: /* space allocation in progress */ + case 0x1a: /* start stop unit in progress */ + case 0x1b: /* sanitize in progress */ + case 0x1d: /* configuration in progress */ + case 0x24: /* depopulation in progress */ + action = ACTION_DELAYED_RETRY; + break; + case 0x0a: /* ALUA state transition */ + action = ACTION_DELAYED_REPREP; + break; + default: + action = ACTION_FAIL; + break; + } + } else + action = ACTION_FAIL; + break; + case VOLUME_OVERFLOW: + /* See SSC3rXX or current. */ + action = ACTION_FAIL; + break; + case DATA_PROTECT: + action = ACTION_FAIL; + if ((sshdr.asc == 0x0C && sshdr.ascq == 0x12) || + (sshdr.asc == 0x55 && + (sshdr.ascq == 0x0E || sshdr.ascq == 0x0F))) { + /* Insufficient zone resources */ + blk_stat = BLK_STS_ZONE_OPEN_RESOURCE; + } + break; + default: + action = ACTION_FAIL; + break; + } + } else + action = ACTION_FAIL; + + if (action != ACTION_FAIL && scsi_cmd_runtime_exceeced(cmd)) + action = ACTION_FAIL; + + switch (action) { + case ACTION_FAIL: + /* Give up and fail the remainder of the request */ + if (!(req->rq_flags & RQF_QUIET)) { + static DEFINE_RATELIMIT_STATE(_rs, + DEFAULT_RATELIMIT_INTERVAL, + DEFAULT_RATELIMIT_BURST); + + if (unlikely(scsi_logging_level)) + level = + SCSI_LOG_LEVEL(SCSI_LOG_MLCOMPLETE_SHIFT, + SCSI_LOG_MLCOMPLETE_BITS); + + /* + * if logging is enabled the failure will be printed + * in scsi_log_completion(), so avoid duplicate messages + */ + if (!level && __ratelimit(&_rs)) { + scsi_print_result(cmd, NULL, FAILED); + if (sense_valid) + scsi_print_sense(cmd); + scsi_print_command(cmd); + } + } + if (!scsi_end_request(req, blk_stat, scsi_rq_err_bytes(req))) + return; + fallthrough; + case ACTION_REPREP: + scsi_mq_requeue_cmd(cmd, 0); + break; + case ACTION_DELAYED_REPREP: + scsi_mq_requeue_cmd(cmd, ALUA_TRANSITION_REPREP_DELAY); + break; + case ACTION_RETRY: + /* Retry the same command immediately */ + __scsi_queue_insert(cmd, SCSI_MLQUEUE_EH_RETRY, false); + break; + case ACTION_DELAYED_RETRY: + /* Retry the same command after a delay */ + __scsi_queue_insert(cmd, SCSI_MLQUEUE_DEVICE_BUSY, false); + break; + } +} + +/* + * Helper for scsi_io_completion() when cmd->result is non-zero. Returns a + * new result that may suppress further error checking. Also modifies + * *blk_statp in some cases. + */ +static int scsi_io_completion_nz_result(struct scsi_cmnd *cmd, int result, + blk_status_t *blk_statp) +{ + bool sense_valid; + bool sense_current = true; /* false implies "deferred sense" */ + struct request *req = scsi_cmd_to_rq(cmd); + struct scsi_sense_hdr sshdr; + + sense_valid = scsi_command_normalize_sense(cmd, &sshdr); + if (sense_valid) + sense_current = !scsi_sense_is_deferred(&sshdr); + + if (blk_rq_is_passthrough(req)) { + if (sense_valid) { + /* + * SG_IO wants current and deferred errors + */ + cmd->sense_len = min(8 + cmd->sense_buffer[7], + SCSI_SENSE_BUFFERSIZE); + } + if (sense_current) + *blk_statp = scsi_result_to_blk_status(result); + } else if (blk_rq_bytes(req) == 0 && sense_current) { + /* + * Flush commands do not transfers any data, and thus cannot use + * good_bytes != blk_rq_bytes(req) as the signal for an error. + * This sets *blk_statp explicitly for the problem case. + */ + *blk_statp = scsi_result_to_blk_status(result); + } + /* + * Recovered errors need reporting, but they're always treated as + * success, so fiddle the result code here. For passthrough requests + * we already took a copy of the original into sreq->result which + * is what gets returned to the user + */ + if (sense_valid && (sshdr.sense_key == RECOVERED_ERROR)) { + bool do_print = true; + /* + * if ATA PASS-THROUGH INFORMATION AVAILABLE [0x0, 0x1d] + * skip print since caller wants ATA registers. Only occurs + * on SCSI ATA PASS_THROUGH commands when CK_COND=1 + */ + if ((sshdr.asc == 0x0) && (sshdr.ascq == 0x1d)) + do_print = false; + else if (req->rq_flags & RQF_QUIET) + do_print = false; + if (do_print) + scsi_print_sense(cmd); + result = 0; + /* for passthrough, *blk_statp may be set */ + *blk_statp = BLK_STS_OK; + } + /* + * Another corner case: the SCSI status byte is non-zero but 'good'. + * Example: PRE-FETCH command returns SAM_STAT_CONDITION_MET when + * it is able to fit nominated LBs in its cache (and SAM_STAT_GOOD + * if it can't fit). Treat SAM_STAT_CONDITION_MET and the related + * intermediate statuses (both obsolete in SAM-4) as good. + */ + if ((result & 0xff) && scsi_status_is_good(result)) { + result = 0; + *blk_statp = BLK_STS_OK; + } + return result; +} + +/** + * scsi_io_completion - Completion processing for SCSI commands. + * @cmd: command that is finished. + * @good_bytes: number of processed bytes. + * + * We will finish off the specified number of sectors. If we are done, the + * command block will be released and the queue function will be goosed. If we + * are not done then we have to figure out what to do next: + * + * a) We can call scsi_mq_requeue_cmd(). The request will be + * unprepared and put back on the queue. Then a new command will + * be created for it. This should be used if we made forward + * progress, or if we want to switch from READ(10) to READ(6) for + * example. + * + * b) We can call scsi_io_completion_action(). The request will be + * put back on the queue and retried using the same command as + * before, possibly after a delay. + * + * c) We can call scsi_end_request() with blk_stat other than + * BLK_STS_OK, to fail the remainder of the request. + */ +void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes) +{ + int result = cmd->result; + struct request *req = scsi_cmd_to_rq(cmd); + blk_status_t blk_stat = BLK_STS_OK; + + if (unlikely(result)) /* a nz result may or may not be an error */ + result = scsi_io_completion_nz_result(cmd, result, &blk_stat); + + /* + * Next deal with any sectors which we were able to correctly + * handle. + */ + SCSI_LOG_HLCOMPLETE(1, scmd_printk(KERN_INFO, cmd, + "%u sectors total, %d bytes done.\n", + blk_rq_sectors(req), good_bytes)); + + /* + * Failed, zero length commands always need to drop down + * to retry code. Fast path should return in this block. + */ + if (likely(blk_rq_bytes(req) > 0 || blk_stat == BLK_STS_OK)) { + if (likely(!scsi_end_request(req, blk_stat, good_bytes))) + return; /* no bytes remaining */ + } + + /* Kill remainder if no retries. */ + if (unlikely(blk_stat && scsi_noretry_cmd(cmd))) { + if (scsi_end_request(req, blk_stat, blk_rq_bytes(req))) + WARN_ONCE(true, + "Bytes remaining after failed, no-retry command"); + return; + } + + /* + * If there had been no error, but we have leftover bytes in the + * request just queue the command up again. + */ + if (likely(result == 0)) + scsi_mq_requeue_cmd(cmd, 0); + else + scsi_io_completion_action(cmd, result); +} + +static inline bool scsi_cmd_needs_dma_drain(struct scsi_device *sdev, + struct request *rq) +{ + return sdev->dma_drain_len && blk_rq_is_passthrough(rq) && + !op_is_write(req_op(rq)) && + sdev->host->hostt->dma_need_drain(rq); +} + +/** + * scsi_alloc_sgtables - Allocate and initialize data and integrity scatterlists + * @cmd: SCSI command data structure to initialize. + * + * Initializes @cmd->sdb and also @cmd->prot_sdb if data integrity is enabled + * for @cmd. + * + * Returns: + * * BLK_STS_OK - on success + * * BLK_STS_RESOURCE - if the failure is retryable + * * BLK_STS_IOERR - if the failure is fatal + */ +blk_status_t scsi_alloc_sgtables(struct scsi_cmnd *cmd) +{ + struct scsi_device *sdev = cmd->device; + struct request *rq = scsi_cmd_to_rq(cmd); + unsigned short nr_segs = blk_rq_nr_phys_segments(rq); + struct scatterlist *last_sg = NULL; + blk_status_t ret; + bool need_drain = scsi_cmd_needs_dma_drain(sdev, rq); + int count; + + if (WARN_ON_ONCE(!nr_segs)) + return BLK_STS_IOERR; + + /* + * Make sure there is space for the drain. The driver must adjust + * max_hw_segments to be prepared for this. + */ + if (need_drain) + nr_segs++; + + /* + * If sg table allocation fails, requeue request later. + */ + if (unlikely(sg_alloc_table_chained(&cmd->sdb.table, nr_segs, + cmd->sdb.table.sgl, SCSI_INLINE_SG_CNT))) + return BLK_STS_RESOURCE; + + /* + * Next, walk the list, and fill in the addresses and sizes of + * each segment. + */ + count = __blk_rq_map_sg(rq->q, rq, cmd->sdb.table.sgl, &last_sg); + + if (blk_rq_bytes(rq) & rq->q->dma_pad_mask) { + unsigned int pad_len = + (rq->q->dma_pad_mask & ~blk_rq_bytes(rq)) + 1; + + last_sg->length += pad_len; + cmd->extra_len += pad_len; + } + + if (need_drain) { + sg_unmark_end(last_sg); + last_sg = sg_next(last_sg); + sg_set_buf(last_sg, sdev->dma_drain_buf, sdev->dma_drain_len); + sg_mark_end(last_sg); + + cmd->extra_len += sdev->dma_drain_len; + count++; + } + + BUG_ON(count > cmd->sdb.table.nents); + cmd->sdb.table.nents = count; + cmd->sdb.length = blk_rq_payload_bytes(rq); + + if (blk_integrity_rq(rq)) { + struct scsi_data_buffer *prot_sdb = cmd->prot_sdb; + int ivecs; + + if (WARN_ON_ONCE(!prot_sdb)) { + /* + * This can happen if someone (e.g. multipath) + * queues a command to a device on an adapter + * that does not support DIX. + */ + ret = BLK_STS_IOERR; + goto out_free_sgtables; + } + + ivecs = blk_rq_count_integrity_sg(rq->q, rq->bio); + + if (sg_alloc_table_chained(&prot_sdb->table, ivecs, + prot_sdb->table.sgl, + SCSI_INLINE_PROT_SG_CNT)) { + ret = BLK_STS_RESOURCE; + goto out_free_sgtables; + } + + count = blk_rq_map_integrity_sg(rq->q, rq->bio, + prot_sdb->table.sgl); + BUG_ON(count > ivecs); + BUG_ON(count > queue_max_integrity_segments(rq->q)); + + cmd->prot_sdb = prot_sdb; + cmd->prot_sdb->table.nents = count; + } + + return BLK_STS_OK; +out_free_sgtables: + scsi_free_sgtables(cmd); + return ret; +} +EXPORT_SYMBOL(scsi_alloc_sgtables); + +/** + * scsi_initialize_rq - initialize struct scsi_cmnd partially + * @rq: Request associated with the SCSI command to be initialized. + * + * This function initializes the members of struct scsi_cmnd that must be + * initialized before request processing starts and that won't be + * reinitialized if a SCSI command is requeued. + */ +static void scsi_initialize_rq(struct request *rq) +{ + struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(rq); + + memset(cmd->cmnd, 0, sizeof(cmd->cmnd)); + cmd->cmd_len = MAX_COMMAND_SIZE; + cmd->sense_len = 0; + init_rcu_head(&cmd->rcu); + cmd->jiffies_at_alloc = jiffies; + cmd->retries = 0; +} + +struct request *scsi_alloc_request(struct request_queue *q, blk_opf_t opf, + blk_mq_req_flags_t flags) +{ + struct request *rq; + + rq = blk_mq_alloc_request(q, opf, flags); + if (!IS_ERR(rq)) + scsi_initialize_rq(rq); + return rq; +} +EXPORT_SYMBOL_GPL(scsi_alloc_request); + +/* + * Only called when the request isn't completed by SCSI, and not freed by + * SCSI + */ +static void scsi_cleanup_rq(struct request *rq) +{ + if (rq->rq_flags & RQF_DONTPREP) { + scsi_mq_uninit_cmd(blk_mq_rq_to_pdu(rq)); + rq->rq_flags &= ~RQF_DONTPREP; + } +} + +/* Called before a request is prepared. See also scsi_mq_prep_fn(). */ +void scsi_init_command(struct scsi_device *dev, struct scsi_cmnd *cmd) +{ + struct request *rq = scsi_cmd_to_rq(cmd); + + if (!blk_rq_is_passthrough(rq) && !(cmd->flags & SCMD_INITIALIZED)) { + cmd->flags |= SCMD_INITIALIZED; + scsi_initialize_rq(rq); + } + + cmd->device = dev; + INIT_LIST_HEAD(&cmd->eh_entry); + INIT_DELAYED_WORK(&cmd->abort_work, scmd_eh_abort_handler); +} + +static blk_status_t scsi_setup_scsi_cmnd(struct scsi_device *sdev, + struct request *req) +{ + struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(req); + + /* + * Passthrough requests may transfer data, in which case they must + * a bio attached to them. Or they might contain a SCSI command + * that does not transfer data, in which case they may optionally + * submit a request without an attached bio. + */ + if (req->bio) { + blk_status_t ret = scsi_alloc_sgtables(cmd); + if (unlikely(ret != BLK_STS_OK)) + return ret; + } else { + BUG_ON(blk_rq_bytes(req)); + + memset(&cmd->sdb, 0, sizeof(cmd->sdb)); + } + + cmd->transfersize = blk_rq_bytes(req); + return BLK_STS_OK; +} + +static blk_status_t +scsi_device_state_check(struct scsi_device *sdev, struct request *req) +{ + switch (sdev->sdev_state) { + case SDEV_CREATED: + return BLK_STS_OK; + case SDEV_OFFLINE: + case SDEV_TRANSPORT_OFFLINE: + /* + * If the device is offline we refuse to process any + * commands. The device must be brought online + * before trying any recovery commands. + */ + if (!sdev->offline_already) { + sdev->offline_already = true; + sdev_printk(KERN_ERR, sdev, + "rejecting I/O to offline device\n"); + } + return BLK_STS_IOERR; + case SDEV_DEL: + /* + * If the device is fully deleted, we refuse to + * process any commands as well. + */ + sdev_printk(KERN_ERR, sdev, + "rejecting I/O to dead device\n"); + return BLK_STS_IOERR; + case SDEV_BLOCK: + case SDEV_CREATED_BLOCK: + return BLK_STS_RESOURCE; + case SDEV_QUIESCE: + /* + * If the device is blocked we only accept power management + * commands. + */ + if (req && WARN_ON_ONCE(!(req->rq_flags & RQF_PM))) + return BLK_STS_RESOURCE; + return BLK_STS_OK; + default: + /* + * For any other not fully online state we only allow + * power management commands. + */ + if (req && !(req->rq_flags & RQF_PM)) + return BLK_STS_OFFLINE; + return BLK_STS_OK; + } +} + +/* + * scsi_dev_queue_ready: if we can send requests to sdev, assign one token + * and return the token else return -1. + */ +static inline int scsi_dev_queue_ready(struct request_queue *q, + struct scsi_device *sdev) +{ + int token; + + token = sbitmap_get(&sdev->budget_map); + if (atomic_read(&sdev->device_blocked)) { + if (token < 0) + goto out; + + if (scsi_device_busy(sdev) > 1) + goto out_dec; + + /* + * unblock after device_blocked iterates to zero + */ + if (atomic_dec_return(&sdev->device_blocked) > 0) + goto out_dec; + SCSI_LOG_MLQUEUE(3, sdev_printk(KERN_INFO, sdev, + "unblocking device at zero depth\n")); + } + + return token; +out_dec: + if (token >= 0) + sbitmap_put(&sdev->budget_map, token); +out: + return -1; +} + +/* + * scsi_target_queue_ready: checks if there we can send commands to target + * @sdev: scsi device on starget to check. + */ +static inline int scsi_target_queue_ready(struct Scsi_Host *shost, + struct scsi_device *sdev) +{ + struct scsi_target *starget = scsi_target(sdev); + unsigned int busy; + + if (starget->single_lun) { + spin_lock_irq(shost->host_lock); + if (starget->starget_sdev_user && + starget->starget_sdev_user != sdev) { + spin_unlock_irq(shost->host_lock); + return 0; + } + starget->starget_sdev_user = sdev; + spin_unlock_irq(shost->host_lock); + } + + if (starget->can_queue <= 0) + return 1; + + busy = atomic_inc_return(&starget->target_busy) - 1; + if (atomic_read(&starget->target_blocked) > 0) { + if (busy) + goto starved; + + /* + * unblock after target_blocked iterates to zero + */ + if (atomic_dec_return(&starget->target_blocked) > 0) + goto out_dec; + + SCSI_LOG_MLQUEUE(3, starget_printk(KERN_INFO, starget, + "unblocking target at zero depth\n")); + } + + if (busy >= starget->can_queue) + goto starved; + + return 1; + +starved: + spin_lock_irq(shost->host_lock); + list_move_tail(&sdev->starved_entry, &shost->starved_list); + spin_unlock_irq(shost->host_lock); +out_dec: + if (starget->can_queue > 0) + atomic_dec(&starget->target_busy); + return 0; +} + +/* + * scsi_host_queue_ready: if we can send requests to shost, return 1 else + * return 0. We must end up running the queue again whenever 0 is + * returned, else IO can hang. + */ +static inline int scsi_host_queue_ready(struct request_queue *q, + struct Scsi_Host *shost, + struct scsi_device *sdev, + struct scsi_cmnd *cmd) +{ + if (scsi_host_in_recovery(shost)) + return 0; + + if (atomic_read(&shost->host_blocked) > 0) { + if (scsi_host_busy(shost) > 0) + goto starved; + + /* + * unblock after host_blocked iterates to zero + */ + if (atomic_dec_return(&shost->host_blocked) > 0) + goto out_dec; + + SCSI_LOG_MLQUEUE(3, + shost_printk(KERN_INFO, shost, + "unblocking host at zero depth\n")); + } + + if (shost->host_self_blocked) + goto starved; + + /* We're OK to process the command, so we can't be starved */ + if (!list_empty(&sdev->starved_entry)) { + spin_lock_irq(shost->host_lock); + if (!list_empty(&sdev->starved_entry)) + list_del_init(&sdev->starved_entry); + spin_unlock_irq(shost->host_lock); + } + + __set_bit(SCMD_STATE_INFLIGHT, &cmd->state); + + return 1; + +starved: + spin_lock_irq(shost->host_lock); + if (list_empty(&sdev->starved_entry)) + list_add_tail(&sdev->starved_entry, &shost->starved_list); + spin_unlock_irq(shost->host_lock); +out_dec: + scsi_dec_host_busy(shost, cmd); + return 0; +} + +/* + * Busy state exporting function for request stacking drivers. + * + * For efficiency, no lock is taken to check the busy state of + * shost/starget/sdev, since the returned value is not guaranteed and + * may be changed after request stacking drivers call the function, + * regardless of taking lock or not. + * + * When scsi can't dispatch I/Os anymore and needs to kill I/Os scsi + * needs to return 'not busy'. Otherwise, request stacking drivers + * may hold requests forever. + */ +static bool scsi_mq_lld_busy(struct request_queue *q) +{ + struct scsi_device *sdev = q->queuedata; + struct Scsi_Host *shost; + + if (blk_queue_dying(q)) + return false; + + shost = sdev->host; + + /* + * Ignore host/starget busy state. + * Since block layer does not have a concept of fairness across + * multiple queues, congestion of host/starget needs to be handled + * in SCSI layer. + */ + if (scsi_host_in_recovery(shost) || scsi_device_is_busy(sdev)) + return true; + + return false; +} + +/* + * Block layer request completion callback. May be called from interrupt + * context. + */ +static void scsi_complete(struct request *rq) +{ + struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(rq); + enum scsi_disposition disposition; + + INIT_LIST_HEAD(&cmd->eh_entry); + + atomic_inc(&cmd->device->iodone_cnt); + if (cmd->result) + atomic_inc(&cmd->device->ioerr_cnt); + + disposition = scsi_decide_disposition(cmd); + if (disposition != SUCCESS && scsi_cmd_runtime_exceeced(cmd)) + disposition = SUCCESS; + + scsi_log_completion(cmd, disposition); + + switch (disposition) { + case SUCCESS: + scsi_finish_command(cmd); + break; + case NEEDS_RETRY: + scsi_queue_insert(cmd, SCSI_MLQUEUE_EH_RETRY); + break; + case ADD_TO_MLQUEUE: + scsi_queue_insert(cmd, SCSI_MLQUEUE_DEVICE_BUSY); + break; + default: + scsi_eh_scmd_add(cmd); + break; + } +} + +/** + * scsi_dispatch_cmd - Dispatch a command to the low-level driver. + * @cmd: command block we are dispatching. + * + * Return: nonzero return request was rejected and device's queue needs to be + * plugged. + */ +static int scsi_dispatch_cmd(struct scsi_cmnd *cmd) +{ + struct Scsi_Host *host = cmd->device->host; + int rtn = 0; + + atomic_inc(&cmd->device->iorequest_cnt); + + /* check if the device is still usable */ + if (unlikely(cmd->device->sdev_state == SDEV_DEL)) { + /* in SDEV_DEL we error all commands. DID_NO_CONNECT + * returns an immediate error upwards, and signals + * that the device is no longer present */ + cmd->result = DID_NO_CONNECT << 16; + goto done; + } + + /* Check to see if the scsi lld made this device blocked. */ + if (unlikely(scsi_device_blocked(cmd->device))) { + /* + * in blocked state, the command is just put back on + * the device queue. The suspend state has already + * blocked the queue so future requests should not + * occur until the device transitions out of the + * suspend state. + */ + SCSI_LOG_MLQUEUE(3, scmd_printk(KERN_INFO, cmd, + "queuecommand : device blocked\n")); + atomic_dec(&cmd->device->iorequest_cnt); + return SCSI_MLQUEUE_DEVICE_BUSY; + } + + /* Store the LUN value in cmnd, if needed. */ + if (cmd->device->lun_in_cdb) + cmd->cmnd[1] = (cmd->cmnd[1] & 0x1f) | + (cmd->device->lun << 5 & 0xe0); + + scsi_log_send(cmd); + + /* + * Before we queue this command, check if the command + * length exceeds what the host adapter can handle. + */ + if (cmd->cmd_len > cmd->device->host->max_cmd_len) { + SCSI_LOG_MLQUEUE(3, scmd_printk(KERN_INFO, cmd, + "queuecommand : command too long. " + "cdb_size=%d host->max_cmd_len=%d\n", + cmd->cmd_len, cmd->device->host->max_cmd_len)); + cmd->result = (DID_ABORT << 16); + goto done; + } + + if (unlikely(host->shost_state == SHOST_DEL)) { + cmd->result = (DID_NO_CONNECT << 16); + goto done; + + } + + trace_scsi_dispatch_cmd_start(cmd); + rtn = host->hostt->queuecommand(host, cmd); + if (rtn) { + atomic_dec(&cmd->device->iorequest_cnt); + trace_scsi_dispatch_cmd_error(cmd, rtn); + if (rtn != SCSI_MLQUEUE_DEVICE_BUSY && + rtn != SCSI_MLQUEUE_TARGET_BUSY) + rtn = SCSI_MLQUEUE_HOST_BUSY; + + SCSI_LOG_MLQUEUE(3, scmd_printk(KERN_INFO, cmd, + "queuecommand : request rejected\n")); + } + + return rtn; + done: + scsi_done(cmd); + return 0; +} + +/* Size in bytes of the sg-list stored in the scsi-mq command-private data. */ +static unsigned int scsi_mq_inline_sgl_size(struct Scsi_Host *shost) +{ + return min_t(unsigned int, shost->sg_tablesize, SCSI_INLINE_SG_CNT) * + sizeof(struct scatterlist); +} + +static blk_status_t scsi_prepare_cmd(struct request *req) +{ + struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(req); + struct scsi_device *sdev = req->q->queuedata; + struct Scsi_Host *shost = sdev->host; + bool in_flight = test_bit(SCMD_STATE_INFLIGHT, &cmd->state); + struct scatterlist *sg; + + scsi_init_command(sdev, cmd); + + cmd->eh_eflags = 0; + cmd->prot_type = 0; + cmd->prot_flags = 0; + cmd->submitter = 0; + memset(&cmd->sdb, 0, sizeof(cmd->sdb)); + cmd->underflow = 0; + cmd->transfersize = 0; + cmd->host_scribble = NULL; + cmd->result = 0; + cmd->extra_len = 0; + cmd->state = 0; + if (in_flight) + __set_bit(SCMD_STATE_INFLIGHT, &cmd->state); + + /* + * Only clear the driver-private command data if the LLD does not supply + * a function to initialize that data. + */ + if (!shost->hostt->init_cmd_priv) + memset(cmd + 1, 0, shost->hostt->cmd_size); + + cmd->prot_op = SCSI_PROT_NORMAL; + if (blk_rq_bytes(req)) + cmd->sc_data_direction = rq_dma_dir(req); + else + cmd->sc_data_direction = DMA_NONE; + + sg = (void *)cmd + sizeof(struct scsi_cmnd) + shost->hostt->cmd_size; + cmd->sdb.table.sgl = sg; + + if (scsi_host_get_prot(shost)) { + memset(cmd->prot_sdb, 0, sizeof(struct scsi_data_buffer)); + + cmd->prot_sdb->table.sgl = + (struct scatterlist *)(cmd->prot_sdb + 1); + } + + /* + * Special handling for passthrough commands, which don't go to the ULP + * at all: + */ + if (blk_rq_is_passthrough(req)) + return scsi_setup_scsi_cmnd(sdev, req); + + if (sdev->handler && sdev->handler->prep_fn) { + blk_status_t ret = sdev->handler->prep_fn(sdev, req); + + if (ret != BLK_STS_OK) + return ret; + } + + /* Usually overridden by the ULP */ + cmd->allowed = 0; + memset(cmd->cmnd, 0, sizeof(cmd->cmnd)); + return scsi_cmd_to_driver(cmd)->init_command(cmd); +} + +static void scsi_done_internal(struct scsi_cmnd *cmd, bool complete_directly) +{ + struct request *req = scsi_cmd_to_rq(cmd); + + switch (cmd->submitter) { + case SUBMITTED_BY_BLOCK_LAYER: + break; + case SUBMITTED_BY_SCSI_ERROR_HANDLER: + return scsi_eh_done(cmd); + case SUBMITTED_BY_SCSI_RESET_IOCTL: + return; + } + + if (unlikely(blk_should_fake_timeout(scsi_cmd_to_rq(cmd)->q))) + return; + if (unlikely(test_and_set_bit(SCMD_STATE_COMPLETE, &cmd->state))) + return; + trace_scsi_dispatch_cmd_done(cmd); + + if (complete_directly) + blk_mq_complete_request_direct(req, scsi_complete); + else + blk_mq_complete_request(req); +} + +void scsi_done(struct scsi_cmnd *cmd) +{ + scsi_done_internal(cmd, false); +} +EXPORT_SYMBOL(scsi_done); + +void scsi_done_direct(struct scsi_cmnd *cmd) +{ + scsi_done_internal(cmd, true); +} +EXPORT_SYMBOL(scsi_done_direct); + +static void scsi_mq_put_budget(struct request_queue *q, int budget_token) +{ + struct scsi_device *sdev = q->queuedata; + + sbitmap_put(&sdev->budget_map, budget_token); +} + +/* + * When to reinvoke queueing after a resource shortage. It's 3 msecs to + * not change behaviour from the previous unplug mechanism, experimentation + * may prove this needs changing. + */ +#define SCSI_QUEUE_DELAY 3 + +static int scsi_mq_get_budget(struct request_queue *q) +{ + struct scsi_device *sdev = q->queuedata; + int token = scsi_dev_queue_ready(q, sdev); + + if (token >= 0) + return token; + + atomic_inc(&sdev->restarts); + + /* + * Orders atomic_inc(&sdev->restarts) and atomic_read(&sdev->device_busy). + * .restarts must be incremented before .device_busy is read because the + * code in scsi_run_queue_async() depends on the order of these operations. + */ + smp_mb__after_atomic(); + + /* + * If all in-flight requests originated from this LUN are completed + * before reading .device_busy, sdev->device_busy will be observed as + * zero, then blk_mq_delay_run_hw_queues() will dispatch this request + * soon. Otherwise, completion of one of these requests will observe + * the .restarts flag, and the request queue will be run for handling + * this request, see scsi_end_request(). + */ + if (unlikely(scsi_device_busy(sdev) == 0 && + !scsi_device_blocked(sdev))) + blk_mq_delay_run_hw_queues(sdev->request_queue, SCSI_QUEUE_DELAY); + return -1; +} + +static void scsi_mq_set_rq_budget_token(struct request *req, int token) +{ + struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(req); + + cmd->budget_token = token; +} + +static int scsi_mq_get_rq_budget_token(struct request *req) +{ + struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(req); + + return cmd->budget_token; +} + +static blk_status_t scsi_queue_rq(struct blk_mq_hw_ctx *hctx, + const struct blk_mq_queue_data *bd) +{ + struct request *req = bd->rq; + struct request_queue *q = req->q; + struct scsi_device *sdev = q->queuedata; + struct Scsi_Host *shost = sdev->host; + struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(req); + blk_status_t ret; + int reason; + + WARN_ON_ONCE(cmd->budget_token < 0); + + /* + * If the device is not in running state we will reject some or all + * commands. + */ + if (unlikely(sdev->sdev_state != SDEV_RUNNING)) { + ret = scsi_device_state_check(sdev, req); + if (ret != BLK_STS_OK) + goto out_put_budget; + } + + ret = BLK_STS_RESOURCE; + if (!scsi_target_queue_ready(shost, sdev)) + goto out_put_budget; + if (!scsi_host_queue_ready(q, shost, sdev, cmd)) + goto out_dec_target_busy; + + if (!(req->rq_flags & RQF_DONTPREP)) { + ret = scsi_prepare_cmd(req); + if (ret != BLK_STS_OK) + goto out_dec_host_busy; + req->rq_flags |= RQF_DONTPREP; + } else { + clear_bit(SCMD_STATE_COMPLETE, &cmd->state); + } + + cmd->flags &= SCMD_PRESERVED_FLAGS; + if (sdev->simple_tags) + cmd->flags |= SCMD_TAGGED; + if (bd->last) + cmd->flags |= SCMD_LAST; + + scsi_set_resid(cmd, 0); + memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE); + cmd->submitter = SUBMITTED_BY_BLOCK_LAYER; + + blk_mq_start_request(req); + reason = scsi_dispatch_cmd(cmd); + if (reason) { + scsi_set_blocked(cmd, reason); + ret = BLK_STS_RESOURCE; + goto out_dec_host_busy; + } + + return BLK_STS_OK; + +out_dec_host_busy: + scsi_dec_host_busy(shost, cmd); +out_dec_target_busy: + if (scsi_target(sdev)->can_queue > 0) + atomic_dec(&scsi_target(sdev)->target_busy); +out_put_budget: + scsi_mq_put_budget(q, cmd->budget_token); + cmd->budget_token = -1; + switch (ret) { + case BLK_STS_OK: + break; + case BLK_STS_RESOURCE: + case BLK_STS_ZONE_RESOURCE: + if (scsi_device_blocked(sdev)) + ret = BLK_STS_DEV_RESOURCE; + break; + case BLK_STS_AGAIN: + cmd->result = DID_BUS_BUSY << 16; + if (req->rq_flags & RQF_DONTPREP) + scsi_mq_uninit_cmd(cmd); + break; + default: + if (unlikely(!scsi_device_online(sdev))) + cmd->result = DID_NO_CONNECT << 16; + else + cmd->result = DID_ERROR << 16; + /* + * Make sure to release all allocated resources when + * we hit an error, as we will never see this command + * again. + */ + if (req->rq_flags & RQF_DONTPREP) + scsi_mq_uninit_cmd(cmd); + scsi_run_queue_async(sdev); + break; + } + return ret; +} + +static int scsi_mq_init_request(struct blk_mq_tag_set *set, struct request *rq, + unsigned int hctx_idx, unsigned int numa_node) +{ + struct Scsi_Host *shost = set->driver_data; + struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(rq); + struct scatterlist *sg; + int ret = 0; + + cmd->sense_buffer = + kmem_cache_alloc_node(scsi_sense_cache, GFP_KERNEL, numa_node); + if (!cmd->sense_buffer) + return -ENOMEM; + + if (scsi_host_get_prot(shost)) { + sg = (void *)cmd + sizeof(struct scsi_cmnd) + + shost->hostt->cmd_size; + cmd->prot_sdb = (void *)sg + scsi_mq_inline_sgl_size(shost); + } + + if (shost->hostt->init_cmd_priv) { + ret = shost->hostt->init_cmd_priv(shost, cmd); + if (ret < 0) + kmem_cache_free(scsi_sense_cache, cmd->sense_buffer); + } + + return ret; +} + +static void scsi_mq_exit_request(struct blk_mq_tag_set *set, struct request *rq, + unsigned int hctx_idx) +{ + struct Scsi_Host *shost = set->driver_data; + struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(rq); + + if (shost->hostt->exit_cmd_priv) + shost->hostt->exit_cmd_priv(shost, cmd); + kmem_cache_free(scsi_sense_cache, cmd->sense_buffer); +} + + +static int scsi_mq_poll(struct blk_mq_hw_ctx *hctx, struct io_comp_batch *iob) +{ + struct Scsi_Host *shost = hctx->driver_data; + + if (shost->hostt->mq_poll) + return shost->hostt->mq_poll(shost, hctx->queue_num); + + return 0; +} + +static int scsi_init_hctx(struct blk_mq_hw_ctx *hctx, void *data, + unsigned int hctx_idx) +{ + struct Scsi_Host *shost = data; + + hctx->driver_data = shost; + return 0; +} + +static void scsi_map_queues(struct blk_mq_tag_set *set) +{ + struct Scsi_Host *shost = container_of(set, struct Scsi_Host, tag_set); + + if (shost->hostt->map_queues) + return shost->hostt->map_queues(shost); + blk_mq_map_queues(&set->map[HCTX_TYPE_DEFAULT]); +} + +void __scsi_init_queue(struct Scsi_Host *shost, struct request_queue *q) +{ + struct device *dev = shost->dma_dev; + + /* + * this limit is imposed by hardware restrictions + */ + blk_queue_max_segments(q, min_t(unsigned short, shost->sg_tablesize, + SG_MAX_SEGMENTS)); + + if (scsi_host_prot_dma(shost)) { + shost->sg_prot_tablesize = + min_not_zero(shost->sg_prot_tablesize, + (unsigned short)SCSI_MAX_PROT_SG_SEGMENTS); + BUG_ON(shost->sg_prot_tablesize < shost->sg_tablesize); + blk_queue_max_integrity_segments(q, shost->sg_prot_tablesize); + } + + blk_queue_max_hw_sectors(q, shost->max_sectors); + blk_queue_segment_boundary(q, shost->dma_boundary); + dma_set_seg_boundary(dev, shost->dma_boundary); + + blk_queue_max_segment_size(q, shost->max_segment_size); + blk_queue_virt_boundary(q, shost->virt_boundary_mask); + dma_set_max_seg_size(dev, queue_max_segment_size(q)); + + /* + * Set a reasonable default alignment: The larger of 32-byte (dword), + * which is a common minimum for HBAs, and the minimum DMA alignment, + * which is set by the platform. + * + * Devices that require a bigger alignment can increase it later. + */ + blk_queue_dma_alignment(q, max(4, dma_get_cache_alignment()) - 1); +} +EXPORT_SYMBOL_GPL(__scsi_init_queue); + +static const struct blk_mq_ops scsi_mq_ops_no_commit = { + .get_budget = scsi_mq_get_budget, + .put_budget = scsi_mq_put_budget, + .queue_rq = scsi_queue_rq, + .complete = scsi_complete, + .timeout = scsi_timeout, +#ifdef CONFIG_BLK_DEBUG_FS + .show_rq = scsi_show_rq, +#endif + .init_request = scsi_mq_init_request, + .exit_request = scsi_mq_exit_request, + .cleanup_rq = scsi_cleanup_rq, + .busy = scsi_mq_lld_busy, + .map_queues = scsi_map_queues, + .init_hctx = scsi_init_hctx, + .poll = scsi_mq_poll, + .set_rq_budget_token = scsi_mq_set_rq_budget_token, + .get_rq_budget_token = scsi_mq_get_rq_budget_token, +}; + + +static void scsi_commit_rqs(struct blk_mq_hw_ctx *hctx) +{ + struct Scsi_Host *shost = hctx->driver_data; + + shost->hostt->commit_rqs(shost, hctx->queue_num); +} + +static const struct blk_mq_ops scsi_mq_ops = { + .get_budget = scsi_mq_get_budget, + .put_budget = scsi_mq_put_budget, + .queue_rq = scsi_queue_rq, + .commit_rqs = scsi_commit_rqs, + .complete = scsi_complete, + .timeout = scsi_timeout, +#ifdef CONFIG_BLK_DEBUG_FS + .show_rq = scsi_show_rq, +#endif + .init_request = scsi_mq_init_request, + .exit_request = scsi_mq_exit_request, + .cleanup_rq = scsi_cleanup_rq, + .busy = scsi_mq_lld_busy, + .map_queues = scsi_map_queues, + .init_hctx = scsi_init_hctx, + .poll = scsi_mq_poll, + .set_rq_budget_token = scsi_mq_set_rq_budget_token, + .get_rq_budget_token = scsi_mq_get_rq_budget_token, +}; + +int scsi_mq_setup_tags(struct Scsi_Host *shost) +{ + unsigned int cmd_size, sgl_size; + struct blk_mq_tag_set *tag_set = &shost->tag_set; + + sgl_size = max_t(unsigned int, sizeof(struct scatterlist), + scsi_mq_inline_sgl_size(shost)); + cmd_size = sizeof(struct scsi_cmnd) + shost->hostt->cmd_size + sgl_size; + if (scsi_host_get_prot(shost)) + cmd_size += sizeof(struct scsi_data_buffer) + + sizeof(struct scatterlist) * SCSI_INLINE_PROT_SG_CNT; + + memset(tag_set, 0, sizeof(*tag_set)); + if (shost->hostt->commit_rqs) + tag_set->ops = &scsi_mq_ops; + else + tag_set->ops = &scsi_mq_ops_no_commit; + tag_set->nr_hw_queues = shost->nr_hw_queues ? : 1; + tag_set->nr_maps = shost->nr_maps ? : 1; + tag_set->queue_depth = shost->can_queue; + tag_set->cmd_size = cmd_size; + tag_set->numa_node = dev_to_node(shost->dma_dev); + tag_set->flags = BLK_MQ_F_SHOULD_MERGE; + tag_set->flags |= + BLK_ALLOC_POLICY_TO_MQ_FLAG(shost->hostt->tag_alloc_policy); + tag_set->driver_data = shost; + if (shost->host_tagset) + tag_set->flags |= BLK_MQ_F_TAG_HCTX_SHARED; + + return blk_mq_alloc_tag_set(tag_set); +} + +void scsi_mq_free_tags(struct kref *kref) +{ + struct Scsi_Host *shost = container_of(kref, typeof(*shost), + tagset_refcnt); + + blk_mq_free_tag_set(&shost->tag_set); + complete(&shost->tagset_freed); +} + +/** + * scsi_device_from_queue - return sdev associated with a request_queue + * @q: The request queue to return the sdev from + * + * Return the sdev associated with a request queue or NULL if the + * request_queue does not reference a SCSI device. + */ +struct scsi_device *scsi_device_from_queue(struct request_queue *q) +{ + struct scsi_device *sdev = NULL; + + if (q->mq_ops == &scsi_mq_ops_no_commit || + q->mq_ops == &scsi_mq_ops) + sdev = q->queuedata; + if (!sdev || !get_device(&sdev->sdev_gendev)) + sdev = NULL; + + return sdev; +} +/* + * pktcdvd should have been integrated into the SCSI layers, but for historical + * reasons like the old IDE driver it isn't. This export allows it to safely + * probe if a given device is a SCSI one and only attach to that. + */ +#ifdef CONFIG_CDROM_PKTCDVD_MODULE +EXPORT_SYMBOL_GPL(scsi_device_from_queue); +#endif + +/** + * scsi_block_requests - Utility function used by low-level drivers to prevent + * further commands from being queued to the device. + * @shost: host in question + * + * There is no timer nor any other means by which the requests get unblocked + * other than the low-level driver calling scsi_unblock_requests(). + */ +void scsi_block_requests(struct Scsi_Host *shost) +{ + shost->host_self_blocked = 1; +} +EXPORT_SYMBOL(scsi_block_requests); + +/** + * scsi_unblock_requests - Utility function used by low-level drivers to allow + * further commands to be queued to the device. + * @shost: host in question + * + * There is no timer nor any other means by which the requests get unblocked + * other than the low-level driver calling scsi_unblock_requests(). This is done + * as an API function so that changes to the internals of the scsi mid-layer + * won't require wholesale changes to drivers that use this feature. + */ +void scsi_unblock_requests(struct Scsi_Host *shost) +{ + shost->host_self_blocked = 0; + scsi_run_host_queues(shost); +} +EXPORT_SYMBOL(scsi_unblock_requests); + +void scsi_exit_queue(void) +{ + kmem_cache_destroy(scsi_sense_cache); +} + +/** + * scsi_mode_select - issue a mode select + * @sdev: SCSI device to be queried + * @pf: Page format bit (1 == standard, 0 == vendor specific) + * @sp: Save page bit (0 == don't save, 1 == save) + * @buffer: request buffer (may not be smaller than eight bytes) + * @len: length of request buffer. + * @timeout: command timeout + * @retries: number of retries before failing + * @data: returns a structure abstracting the mode header data + * @sshdr: place to put sense data (or NULL if no sense to be collected). + * must be SCSI_SENSE_BUFFERSIZE big. + * + * Returns zero if successful; negative error number or scsi + * status on error + * + */ +int scsi_mode_select(struct scsi_device *sdev, int pf, int sp, + unsigned char *buffer, int len, int timeout, int retries, + struct scsi_mode_data *data, struct scsi_sense_hdr *sshdr) +{ + unsigned char cmd[10]; + unsigned char *real_buffer; + int ret; + + memset(cmd, 0, sizeof(cmd)); + cmd[1] = (pf ? 0x10 : 0) | (sp ? 0x01 : 0); + + /* + * Use MODE SELECT(10) if the device asked for it or if the mode page + * and the mode select header cannot fit within the maximumm 255 bytes + * of the MODE SELECT(6) command. + */ + if (sdev->use_10_for_ms || + len + 4 > 255 || + data->block_descriptor_length > 255) { + if (len > 65535 - 8) + return -EINVAL; + real_buffer = kmalloc(8 + len, GFP_KERNEL); + if (!real_buffer) + return -ENOMEM; + memcpy(real_buffer + 8, buffer, len); + len += 8; + real_buffer[0] = 0; + real_buffer[1] = 0; + real_buffer[2] = data->medium_type; + real_buffer[3] = data->device_specific; + real_buffer[4] = data->longlba ? 0x01 : 0; + real_buffer[5] = 0; + put_unaligned_be16(data->block_descriptor_length, + &real_buffer[6]); + + cmd[0] = MODE_SELECT_10; + put_unaligned_be16(len, &cmd[7]); + } else { + if (data->longlba) + return -EINVAL; + + real_buffer = kmalloc(4 + len, GFP_KERNEL); + if (!real_buffer) + return -ENOMEM; + memcpy(real_buffer + 4, buffer, len); + len += 4; + real_buffer[0] = 0; + real_buffer[1] = data->medium_type; + real_buffer[2] = data->device_specific; + real_buffer[3] = data->block_descriptor_length; + + cmd[0] = MODE_SELECT; + cmd[4] = len; + } + + ret = scsi_execute_req(sdev, cmd, DMA_TO_DEVICE, real_buffer, len, + sshdr, timeout, retries, NULL); + kfree(real_buffer); + return ret; +} +EXPORT_SYMBOL_GPL(scsi_mode_select); + +/** + * scsi_mode_sense - issue a mode sense, falling back from 10 to six bytes if necessary. + * @sdev: SCSI device to be queried + * @dbd: set to prevent mode sense from returning block descriptors + * @modepage: mode page being requested + * @buffer: request buffer (may not be smaller than eight bytes) + * @len: length of request buffer. + * @timeout: command timeout + * @retries: number of retries before failing + * @data: returns a structure abstracting the mode header data + * @sshdr: place to put sense data (or NULL if no sense to be collected). + * must be SCSI_SENSE_BUFFERSIZE big. + * + * Returns zero if successful, or a negative error number on failure + */ +int +scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage, + unsigned char *buffer, int len, int timeout, int retries, + struct scsi_mode_data *data, struct scsi_sense_hdr *sshdr) +{ + unsigned char cmd[12]; + int use_10_for_ms; + int header_length; + int result, retry_count = retries; + struct scsi_sense_hdr my_sshdr; + + memset(data, 0, sizeof(*data)); + memset(&cmd[0], 0, 12); + + dbd = sdev->set_dbd_for_ms ? 8 : dbd; + cmd[1] = dbd & 0x18; /* allows DBD and LLBA bits */ + cmd[2] = modepage; + + /* caller might not be interested in sense, but we need it */ + if (!sshdr) + sshdr = &my_sshdr; + + retry: + use_10_for_ms = sdev->use_10_for_ms || len > 255; + + if (use_10_for_ms) { + if (len < 8 || len > 65535) + return -EINVAL; + + cmd[0] = MODE_SENSE_10; + put_unaligned_be16(len, &cmd[7]); + header_length = 8; + } else { + if (len < 4) + return -EINVAL; + + cmd[0] = MODE_SENSE; + cmd[4] = len; + header_length = 4; + } + + memset(buffer, 0, len); + + result = scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buffer, len, + sshdr, timeout, retries, NULL); + if (result < 0) + return result; + + /* This code looks awful: what it's doing is making sure an + * ILLEGAL REQUEST sense return identifies the actual command + * byte as the problem. MODE_SENSE commands can return + * ILLEGAL REQUEST if the code page isn't supported */ + + if (!scsi_status_is_good(result)) { + if (scsi_sense_valid(sshdr)) { + if ((sshdr->sense_key == ILLEGAL_REQUEST) && + (sshdr->asc == 0x20) && (sshdr->ascq == 0)) { + /* + * Invalid command operation code: retry using + * MODE SENSE(6) if this was a MODE SENSE(10) + * request, except if the request mode page is + * too large for MODE SENSE single byte + * allocation length field. + */ + if (use_10_for_ms) { + if (len > 255) + return -EIO; + sdev->use_10_for_ms = 0; + goto retry; + } + } + if (scsi_status_is_check_condition(result) && + sshdr->sense_key == UNIT_ATTENTION && + retry_count) { + retry_count--; + goto retry; + } + } + return -EIO; + } + if (unlikely(buffer[0] == 0x86 && buffer[1] == 0x0b && + (modepage == 6 || modepage == 8))) { + /* Initio breakage? */ + header_length = 0; + data->length = 13; + data->medium_type = 0; + data->device_specific = 0; + data->longlba = 0; + data->block_descriptor_length = 0; + } else if (use_10_for_ms) { + data->length = get_unaligned_be16(&buffer[0]) + 2; + data->medium_type = buffer[2]; + data->device_specific = buffer[3]; + data->longlba = buffer[4] & 0x01; + data->block_descriptor_length = get_unaligned_be16(&buffer[6]); + } else { + data->length = buffer[0] + 1; + data->medium_type = buffer[1]; + data->device_specific = buffer[2]; + data->block_descriptor_length = buffer[3]; + } + data->header_length = header_length; + + return 0; +} +EXPORT_SYMBOL(scsi_mode_sense); + +/** + * scsi_test_unit_ready - test if unit is ready + * @sdev: scsi device to change the state of. + * @timeout: command timeout + * @retries: number of retries before failing + * @sshdr: outpout pointer for decoded sense information. + * + * Returns zero if unsuccessful or an error if TUR failed. For + * removable media, UNIT_ATTENTION sets ->changed flag. + **/ +int +scsi_test_unit_ready(struct scsi_device *sdev, int timeout, int retries, + struct scsi_sense_hdr *sshdr) +{ + char cmd[] = { + TEST_UNIT_READY, 0, 0, 0, 0, 0, + }; + int result; + + /* try to eat the UNIT_ATTENTION if there are enough retries */ + do { + result = scsi_execute_req(sdev, cmd, DMA_NONE, NULL, 0, sshdr, + timeout, 1, NULL); + if (sdev->removable && scsi_sense_valid(sshdr) && + sshdr->sense_key == UNIT_ATTENTION) + sdev->changed = 1; + } while (scsi_sense_valid(sshdr) && + sshdr->sense_key == UNIT_ATTENTION && --retries); + + return result; +} +EXPORT_SYMBOL(scsi_test_unit_ready); + +/** + * scsi_device_set_state - Take the given device through the device state model. + * @sdev: scsi device to change the state of. + * @state: state to change to. + * + * Returns zero if successful or an error if the requested + * transition is illegal. + */ +int +scsi_device_set_state(struct scsi_device *sdev, enum scsi_device_state state) +{ + enum scsi_device_state oldstate = sdev->sdev_state; + + if (state == oldstate) + return 0; + + switch (state) { + case SDEV_CREATED: + switch (oldstate) { + case SDEV_CREATED_BLOCK: + break; + default: + goto illegal; + } + break; + + case SDEV_RUNNING: + switch (oldstate) { + case SDEV_CREATED: + case SDEV_OFFLINE: + case SDEV_TRANSPORT_OFFLINE: + case SDEV_QUIESCE: + case SDEV_BLOCK: + break; + default: + goto illegal; + } + break; + + case SDEV_QUIESCE: + switch (oldstate) { + case SDEV_RUNNING: + case SDEV_OFFLINE: + case SDEV_TRANSPORT_OFFLINE: + break; + default: + goto illegal; + } + break; + + case SDEV_OFFLINE: + case SDEV_TRANSPORT_OFFLINE: + switch (oldstate) { + case SDEV_CREATED: + case SDEV_RUNNING: + case SDEV_QUIESCE: + case SDEV_BLOCK: + break; + default: + goto illegal; + } + break; + + case SDEV_BLOCK: + switch (oldstate) { + case SDEV_RUNNING: + case SDEV_CREATED_BLOCK: + case SDEV_QUIESCE: + case SDEV_OFFLINE: + break; + default: + goto illegal; + } + break; + + case SDEV_CREATED_BLOCK: + switch (oldstate) { + case SDEV_CREATED: + break; + default: + goto illegal; + } + break; + + case SDEV_CANCEL: + switch (oldstate) { + case SDEV_CREATED: + case SDEV_RUNNING: + case SDEV_QUIESCE: + case SDEV_OFFLINE: + case SDEV_TRANSPORT_OFFLINE: + break; + default: + goto illegal; + } + break; + + case SDEV_DEL: + switch (oldstate) { + case SDEV_CREATED: + case SDEV_RUNNING: + case SDEV_OFFLINE: + case SDEV_TRANSPORT_OFFLINE: + case SDEV_CANCEL: + case SDEV_BLOCK: + case SDEV_CREATED_BLOCK: + break; + default: + goto illegal; + } + break; + + } + sdev->offline_already = false; + sdev->sdev_state = state; + return 0; + + illegal: + SCSI_LOG_ERROR_RECOVERY(1, + sdev_printk(KERN_ERR, sdev, + "Illegal state transition %s->%s", + scsi_device_state_name(oldstate), + scsi_device_state_name(state)) + ); + return -EINVAL; +} +EXPORT_SYMBOL(scsi_device_set_state); + +/** + * scsi_evt_emit - emit a single SCSI device uevent + * @sdev: associated SCSI device + * @evt: event to emit + * + * Send a single uevent (scsi_event) to the associated scsi_device. + */ +static void scsi_evt_emit(struct scsi_device *sdev, struct scsi_event *evt) +{ + int idx = 0; + char *envp[3]; + + switch (evt->evt_type) { + case SDEV_EVT_MEDIA_CHANGE: + envp[idx++] = "SDEV_MEDIA_CHANGE=1"; + break; + case SDEV_EVT_INQUIRY_CHANGE_REPORTED: + scsi_rescan_device(sdev); + envp[idx++] = "SDEV_UA=INQUIRY_DATA_HAS_CHANGED"; + break; + case SDEV_EVT_CAPACITY_CHANGE_REPORTED: + envp[idx++] = "SDEV_UA=CAPACITY_DATA_HAS_CHANGED"; + break; + case SDEV_EVT_SOFT_THRESHOLD_REACHED_REPORTED: + envp[idx++] = "SDEV_UA=THIN_PROVISIONING_SOFT_THRESHOLD_REACHED"; + break; + case SDEV_EVT_MODE_PARAMETER_CHANGE_REPORTED: + envp[idx++] = "SDEV_UA=MODE_PARAMETERS_CHANGED"; + break; + case SDEV_EVT_LUN_CHANGE_REPORTED: + envp[idx++] = "SDEV_UA=REPORTED_LUNS_DATA_HAS_CHANGED"; + break; + case SDEV_EVT_ALUA_STATE_CHANGE_REPORTED: + envp[idx++] = "SDEV_UA=ASYMMETRIC_ACCESS_STATE_CHANGED"; + break; + case SDEV_EVT_POWER_ON_RESET_OCCURRED: + envp[idx++] = "SDEV_UA=POWER_ON_RESET_OCCURRED"; + break; + default: + /* do nothing */ + break; + } + + envp[idx++] = NULL; + + kobject_uevent_env(&sdev->sdev_gendev.kobj, KOBJ_CHANGE, envp); +} + +/** + * scsi_evt_thread - send a uevent for each scsi event + * @work: work struct for scsi_device + * + * Dispatch queued events to their associated scsi_device kobjects + * as uevents. + */ +void scsi_evt_thread(struct work_struct *work) +{ + struct scsi_device *sdev; + enum scsi_device_event evt_type; + LIST_HEAD(event_list); + + sdev = container_of(work, struct scsi_device, event_work); + + for (evt_type = SDEV_EVT_FIRST; evt_type <= SDEV_EVT_LAST; evt_type++) + if (test_and_clear_bit(evt_type, sdev->pending_events)) + sdev_evt_send_simple(sdev, evt_type, GFP_KERNEL); + + while (1) { + struct scsi_event *evt; + struct list_head *this, *tmp; + unsigned long flags; + + spin_lock_irqsave(&sdev->list_lock, flags); + list_splice_init(&sdev->event_list, &event_list); + spin_unlock_irqrestore(&sdev->list_lock, flags); + + if (list_empty(&event_list)) + break; + + list_for_each_safe(this, tmp, &event_list) { + evt = list_entry(this, struct scsi_event, node); + list_del(&evt->node); + scsi_evt_emit(sdev, evt); + kfree(evt); + } + } +} + +/** + * sdev_evt_send - send asserted event to uevent thread + * @sdev: scsi_device event occurred on + * @evt: event to send + * + * Assert scsi device event asynchronously. + */ +void sdev_evt_send(struct scsi_device *sdev, struct scsi_event *evt) +{ + unsigned long flags; + +#if 0 + /* FIXME: currently this check eliminates all media change events + * for polled devices. Need to update to discriminate between AN + * and polled events */ + if (!test_bit(evt->evt_type, sdev->supported_events)) { + kfree(evt); + return; + } +#endif + + spin_lock_irqsave(&sdev->list_lock, flags); + list_add_tail(&evt->node, &sdev->event_list); + schedule_work(&sdev->event_work); + spin_unlock_irqrestore(&sdev->list_lock, flags); +} +EXPORT_SYMBOL_GPL(sdev_evt_send); + +/** + * sdev_evt_alloc - allocate a new scsi event + * @evt_type: type of event to allocate + * @gfpflags: GFP flags for allocation + * + * Allocates and returns a new scsi_event. + */ +struct scsi_event *sdev_evt_alloc(enum scsi_device_event evt_type, + gfp_t gfpflags) +{ + struct scsi_event *evt = kzalloc(sizeof(struct scsi_event), gfpflags); + if (!evt) + return NULL; + + evt->evt_type = evt_type; + INIT_LIST_HEAD(&evt->node); + + /* evt_type-specific initialization, if any */ + switch (evt_type) { + case SDEV_EVT_MEDIA_CHANGE: + case SDEV_EVT_INQUIRY_CHANGE_REPORTED: + case SDEV_EVT_CAPACITY_CHANGE_REPORTED: + case SDEV_EVT_SOFT_THRESHOLD_REACHED_REPORTED: + case SDEV_EVT_MODE_PARAMETER_CHANGE_REPORTED: + case SDEV_EVT_LUN_CHANGE_REPORTED: + case SDEV_EVT_ALUA_STATE_CHANGE_REPORTED: + case SDEV_EVT_POWER_ON_RESET_OCCURRED: + default: + /* do nothing */ + break; + } + + return evt; +} +EXPORT_SYMBOL_GPL(sdev_evt_alloc); + +/** + * sdev_evt_send_simple - send asserted event to uevent thread + * @sdev: scsi_device event occurred on + * @evt_type: type of event to send + * @gfpflags: GFP flags for allocation + * + * Assert scsi device event asynchronously, given an event type. + */ +void sdev_evt_send_simple(struct scsi_device *sdev, + enum scsi_device_event evt_type, gfp_t gfpflags) +{ + struct scsi_event *evt = sdev_evt_alloc(evt_type, gfpflags); + if (!evt) { + sdev_printk(KERN_ERR, sdev, "event %d eaten due to OOM\n", + evt_type); + return; + } + + sdev_evt_send(sdev, evt); +} +EXPORT_SYMBOL_GPL(sdev_evt_send_simple); + +/** + * scsi_device_quiesce - Block all commands except power management. + * @sdev: scsi device to quiesce. + * + * This works by trying to transition to the SDEV_QUIESCE state + * (which must be a legal transition). When the device is in this + * state, only power management requests will be accepted, all others will + * be deferred. + * + * Must be called with user context, may sleep. + * + * Returns zero if unsuccessful or an error if not. + */ +int +scsi_device_quiesce(struct scsi_device *sdev) +{ + struct request_queue *q = sdev->request_queue; + int err; + + /* + * It is allowed to call scsi_device_quiesce() multiple times from + * the same context but concurrent scsi_device_quiesce() calls are + * not allowed. + */ + WARN_ON_ONCE(sdev->quiesced_by && sdev->quiesced_by != current); + + if (sdev->quiesced_by == current) + return 0; + + blk_set_pm_only(q); + + blk_mq_freeze_queue(q); + /* + * Ensure that the effect of blk_set_pm_only() will be visible + * for percpu_ref_tryget() callers that occur after the queue + * unfreeze even if the queue was already frozen before this function + * was called. See also https://lwn.net/Articles/573497/. + */ + synchronize_rcu(); + blk_mq_unfreeze_queue(q); + + mutex_lock(&sdev->state_mutex); + err = scsi_device_set_state(sdev, SDEV_QUIESCE); + if (err == 0) + sdev->quiesced_by = current; + else + blk_clear_pm_only(q); + mutex_unlock(&sdev->state_mutex); + + return err; +} +EXPORT_SYMBOL(scsi_device_quiesce); + +/** + * scsi_device_resume - Restart user issued commands to a quiesced device. + * @sdev: scsi device to resume. + * + * Moves the device from quiesced back to running and restarts the + * queues. + * + * Must be called with user context, may sleep. + */ +void scsi_device_resume(struct scsi_device *sdev) +{ + /* check if the device state was mutated prior to resume, and if + * so assume the state is being managed elsewhere (for example + * device deleted during suspend) + */ + mutex_lock(&sdev->state_mutex); + if (sdev->sdev_state == SDEV_QUIESCE) + scsi_device_set_state(sdev, SDEV_RUNNING); + if (sdev->quiesced_by) { + sdev->quiesced_by = NULL; + blk_clear_pm_only(sdev->request_queue); + } + mutex_unlock(&sdev->state_mutex); +} +EXPORT_SYMBOL(scsi_device_resume); + +static void +device_quiesce_fn(struct scsi_device *sdev, void *data) +{ + scsi_device_quiesce(sdev); +} + +void +scsi_target_quiesce(struct scsi_target *starget) +{ + starget_for_each_device(starget, NULL, device_quiesce_fn); +} +EXPORT_SYMBOL(scsi_target_quiesce); + +static void +device_resume_fn(struct scsi_device *sdev, void *data) +{ + scsi_device_resume(sdev); +} + +void +scsi_target_resume(struct scsi_target *starget) +{ + starget_for_each_device(starget, NULL, device_resume_fn); +} +EXPORT_SYMBOL(scsi_target_resume); + +static int __scsi_internal_device_block_nowait(struct scsi_device *sdev) +{ + if (scsi_device_set_state(sdev, SDEV_BLOCK)) + return scsi_device_set_state(sdev, SDEV_CREATED_BLOCK); + + return 0; +} + +void scsi_start_queue(struct scsi_device *sdev) +{ + if (cmpxchg(&sdev->queue_stopped, 1, 0)) + blk_mq_unquiesce_queue(sdev->request_queue); +} + +static void scsi_stop_queue(struct scsi_device *sdev, bool nowait) +{ + /* + * The atomic variable of ->queue_stopped covers that + * blk_mq_quiesce_queue* is balanced with blk_mq_unquiesce_queue. + * + * However, we still need to wait until quiesce is done + * in case that queue has been stopped. + */ + if (!cmpxchg(&sdev->queue_stopped, 0, 1)) { + if (nowait) + blk_mq_quiesce_queue_nowait(sdev->request_queue); + else + blk_mq_quiesce_queue(sdev->request_queue); + } else { + if (!nowait) + blk_mq_wait_quiesce_done(sdev->request_queue); + } +} + +/** + * scsi_internal_device_block_nowait - try to transition to the SDEV_BLOCK state + * @sdev: device to block + * + * Pause SCSI command processing on the specified device. Does not sleep. + * + * Returns zero if successful or a negative error code upon failure. + * + * Notes: + * This routine transitions the device to the SDEV_BLOCK state (which must be + * a legal transition). When the device is in this state, command processing + * is paused until the device leaves the SDEV_BLOCK state. See also + * scsi_internal_device_unblock_nowait(). + */ +int scsi_internal_device_block_nowait(struct scsi_device *sdev) +{ + int ret = __scsi_internal_device_block_nowait(sdev); + + /* + * The device has transitioned to SDEV_BLOCK. Stop the + * block layer from calling the midlayer with this device's + * request queue. + */ + if (!ret) + scsi_stop_queue(sdev, true); + return ret; +} +EXPORT_SYMBOL_GPL(scsi_internal_device_block_nowait); + +/** + * scsi_internal_device_block - try to transition to the SDEV_BLOCK state + * @sdev: device to block + * + * Pause SCSI command processing on the specified device and wait until all + * ongoing scsi_request_fn() / scsi_queue_rq() calls have finished. May sleep. + * + * Returns zero if successful or a negative error code upon failure. + * + * Note: + * This routine transitions the device to the SDEV_BLOCK state (which must be + * a legal transition). When the device is in this state, command processing + * is paused until the device leaves the SDEV_BLOCK state. See also + * scsi_internal_device_unblock(). + */ +static int scsi_internal_device_block(struct scsi_device *sdev) +{ + int err; + + mutex_lock(&sdev->state_mutex); + err = __scsi_internal_device_block_nowait(sdev); + if (err == 0) + scsi_stop_queue(sdev, false); + mutex_unlock(&sdev->state_mutex); + + return err; +} + +/** + * scsi_internal_device_unblock_nowait - resume a device after a block request + * @sdev: device to resume + * @new_state: state to set the device to after unblocking + * + * Restart the device queue for a previously suspended SCSI device. Does not + * sleep. + * + * Returns zero if successful or a negative error code upon failure. + * + * Notes: + * This routine transitions the device to the SDEV_RUNNING state or to one of + * the offline states (which must be a legal transition) allowing the midlayer + * to goose the queue for this device. + */ +int scsi_internal_device_unblock_nowait(struct scsi_device *sdev, + enum scsi_device_state new_state) +{ + switch (new_state) { + case SDEV_RUNNING: + case SDEV_TRANSPORT_OFFLINE: + break; + default: + return -EINVAL; + } + + /* + * Try to transition the scsi device to SDEV_RUNNING or one of the + * offlined states and goose the device queue if successful. + */ + switch (sdev->sdev_state) { + case SDEV_BLOCK: + case SDEV_TRANSPORT_OFFLINE: + sdev->sdev_state = new_state; + break; + case SDEV_CREATED_BLOCK: + if (new_state == SDEV_TRANSPORT_OFFLINE || + new_state == SDEV_OFFLINE) + sdev->sdev_state = new_state; + else + sdev->sdev_state = SDEV_CREATED; + break; + case SDEV_CANCEL: + case SDEV_OFFLINE: + break; + default: + return -EINVAL; + } + scsi_start_queue(sdev); + + return 0; +} +EXPORT_SYMBOL_GPL(scsi_internal_device_unblock_nowait); + +/** + * scsi_internal_device_unblock - resume a device after a block request + * @sdev: device to resume + * @new_state: state to set the device to after unblocking + * + * Restart the device queue for a previously suspended SCSI device. May sleep. + * + * Returns zero if successful or a negative error code upon failure. + * + * Notes: + * This routine transitions the device to the SDEV_RUNNING state or to one of + * the offline states (which must be a legal transition) allowing the midlayer + * to goose the queue for this device. + */ +static int scsi_internal_device_unblock(struct scsi_device *sdev, + enum scsi_device_state new_state) +{ + int ret; + + mutex_lock(&sdev->state_mutex); + ret = scsi_internal_device_unblock_nowait(sdev, new_state); + mutex_unlock(&sdev->state_mutex); + + return ret; +} + +static void +device_block(struct scsi_device *sdev, void *data) +{ + int ret; + + ret = scsi_internal_device_block(sdev); + + WARN_ONCE(ret, "scsi_internal_device_block(%s) failed: ret = %d\n", + dev_name(&sdev->sdev_gendev), ret); +} + +static int +target_block(struct device *dev, void *data) +{ + if (scsi_is_target_device(dev)) + starget_for_each_device(to_scsi_target(dev), NULL, + device_block); + return 0; +} + +void +scsi_target_block(struct device *dev) +{ + if (scsi_is_target_device(dev)) + starget_for_each_device(to_scsi_target(dev), NULL, + device_block); + else + device_for_each_child(dev, NULL, target_block); +} +EXPORT_SYMBOL_GPL(scsi_target_block); + +static void +device_unblock(struct scsi_device *sdev, void *data) +{ + scsi_internal_device_unblock(sdev, *(enum scsi_device_state *)data); +} + +static int +target_unblock(struct device *dev, void *data) +{ + if (scsi_is_target_device(dev)) + starget_for_each_device(to_scsi_target(dev), data, + device_unblock); + return 0; +} + +void +scsi_target_unblock(struct device *dev, enum scsi_device_state new_state) +{ + if (scsi_is_target_device(dev)) + starget_for_each_device(to_scsi_target(dev), &new_state, + device_unblock); + else + device_for_each_child(dev, &new_state, target_unblock); +} +EXPORT_SYMBOL_GPL(scsi_target_unblock); + +int +scsi_host_block(struct Scsi_Host *shost) +{ + struct scsi_device *sdev; + int ret = 0; + + /* + * Call scsi_internal_device_block_nowait so we can avoid + * calling synchronize_rcu() for each LUN. + */ + shost_for_each_device(sdev, shost) { + mutex_lock(&sdev->state_mutex); + ret = scsi_internal_device_block_nowait(sdev); + mutex_unlock(&sdev->state_mutex); + if (ret) { + scsi_device_put(sdev); + break; + } + } + + /* + * SCSI never enables blk-mq's BLK_MQ_F_BLOCKING flag so + * calling synchronize_rcu() once is enough. + */ + WARN_ON_ONCE(shost->tag_set.flags & BLK_MQ_F_BLOCKING); + + if (!ret) + synchronize_rcu(); + + return ret; +} +EXPORT_SYMBOL_GPL(scsi_host_block); + +int +scsi_host_unblock(struct Scsi_Host *shost, int new_state) +{ + struct scsi_device *sdev; + int ret = 0; + + shost_for_each_device(sdev, shost) { + ret = scsi_internal_device_unblock(sdev, new_state); + if (ret) { + scsi_device_put(sdev); + break; + } + } + return ret; +} +EXPORT_SYMBOL_GPL(scsi_host_unblock); + +/** + * scsi_kmap_atomic_sg - find and atomically map an sg-elemnt + * @sgl: scatter-gather list + * @sg_count: number of segments in sg + * @offset: offset in bytes into sg, on return offset into the mapped area + * @len: bytes to map, on return number of bytes mapped + * + * Returns virtual address of the start of the mapped page + */ +void *scsi_kmap_atomic_sg(struct scatterlist *sgl, int sg_count, + size_t *offset, size_t *len) +{ + int i; + size_t sg_len = 0, len_complete = 0; + struct scatterlist *sg; + struct page *page; + + WARN_ON(!irqs_disabled()); + + for_each_sg(sgl, sg, sg_count, i) { + len_complete = sg_len; /* Complete sg-entries */ + sg_len += sg->length; + if (sg_len > *offset) + break; + } + + if (unlikely(i == sg_count)) { + printk(KERN_ERR "%s: Bytes in sg: %zu, requested offset %zu, " + "elements %d\n", + __func__, sg_len, *offset, sg_count); + WARN_ON(1); + return NULL; + } + + /* Offset starting from the beginning of first page in this sg-entry */ + *offset = *offset - len_complete + sg->offset; + + /* Assumption: contiguous pages can be accessed as "page + i" */ + page = nth_page(sg_page(sg), (*offset >> PAGE_SHIFT)); + *offset &= ~PAGE_MASK; + + /* Bytes in this sg-entry from *offset to the end of the page */ + sg_len = PAGE_SIZE - *offset; + if (*len > sg_len) + *len = sg_len; + + return kmap_atomic(page); +} +EXPORT_SYMBOL(scsi_kmap_atomic_sg); + +/** + * scsi_kunmap_atomic_sg - atomically unmap a virtual address, previously mapped with scsi_kmap_atomic_sg + * @virt: virtual address to be unmapped + */ +void scsi_kunmap_atomic_sg(void *virt) +{ + kunmap_atomic(virt); +} +EXPORT_SYMBOL(scsi_kunmap_atomic_sg); + +void sdev_disable_disk_events(struct scsi_device *sdev) +{ + atomic_inc(&sdev->disk_events_disable_depth); +} +EXPORT_SYMBOL(sdev_disable_disk_events); + +void sdev_enable_disk_events(struct scsi_device *sdev) +{ + if (WARN_ON_ONCE(atomic_read(&sdev->disk_events_disable_depth) <= 0)) + return; + atomic_dec(&sdev->disk_events_disable_depth); +} +EXPORT_SYMBOL(sdev_enable_disk_events); + +static unsigned char designator_prio(const unsigned char *d) +{ + if (d[1] & 0x30) + /* not associated with LUN */ + return 0; + + if (d[3] == 0) + /* invalid length */ + return 0; + + /* + * Order of preference for lun descriptor: + * - SCSI name string + * - NAA IEEE Registered Extended + * - EUI-64 based 16-byte + * - EUI-64 based 12-byte + * - NAA IEEE Registered + * - NAA IEEE Extended + * - EUI-64 based 8-byte + * - SCSI name string (truncated) + * - T10 Vendor ID + * as longer descriptors reduce the likelyhood + * of identification clashes. + */ + + switch (d[1] & 0xf) { + case 8: + /* SCSI name string, variable-length UTF-8 */ + return 9; + case 3: + switch (d[4] >> 4) { + case 6: + /* NAA registered extended */ + return 8; + case 5: + /* NAA registered */ + return 5; + case 4: + /* NAA extended */ + return 4; + case 3: + /* NAA locally assigned */ + return 1; + default: + break; + } + break; + case 2: + switch (d[3]) { + case 16: + /* EUI64-based, 16 byte */ + return 7; + case 12: + /* EUI64-based, 12 byte */ + return 6; + case 8: + /* EUI64-based, 8 byte */ + return 3; + default: + break; + } + break; + case 1: + /* T10 vendor ID */ + return 1; + default: + break; + } + + return 0; +} + +/** + * scsi_vpd_lun_id - return a unique device identification + * @sdev: SCSI device + * @id: buffer for the identification + * @id_len: length of the buffer + * + * Copies a unique device identification into @id based + * on the information in the VPD page 0x83 of the device. + * The string will be formatted as a SCSI name string. + * + * Returns the length of the identification or error on failure. + * If the identifier is longer than the supplied buffer the actual + * identifier length is returned and the buffer is not zero-padded. + */ +int scsi_vpd_lun_id(struct scsi_device *sdev, char *id, size_t id_len) +{ + u8 cur_id_prio = 0; + u8 cur_id_size = 0; + const unsigned char *d, *cur_id_str; + const struct scsi_vpd *vpd_pg83; + int id_size = -EINVAL; + + rcu_read_lock(); + vpd_pg83 = rcu_dereference(sdev->vpd_pg83); + if (!vpd_pg83) { + rcu_read_unlock(); + return -ENXIO; + } + + /* The id string must be at least 20 bytes + terminating NULL byte */ + if (id_len < 21) { + rcu_read_unlock(); + return -EINVAL; + } + + memset(id, 0, id_len); + for (d = vpd_pg83->data + 4; + d < vpd_pg83->data + vpd_pg83->len; + d += d[3] + 4) { + u8 prio = designator_prio(d); + + if (prio == 0 || cur_id_prio > prio) + continue; + + switch (d[1] & 0xf) { + case 0x1: + /* T10 Vendor ID */ + if (cur_id_size > d[3]) + break; + cur_id_prio = prio; + cur_id_size = d[3]; + if (cur_id_size + 4 > id_len) + cur_id_size = id_len - 4; + cur_id_str = d + 4; + id_size = snprintf(id, id_len, "t10.%*pE", + cur_id_size, cur_id_str); + break; + case 0x2: + /* EUI-64 */ + cur_id_prio = prio; + cur_id_size = d[3]; + cur_id_str = d + 4; + switch (cur_id_size) { + case 8: + id_size = snprintf(id, id_len, + "eui.%8phN", + cur_id_str); + break; + case 12: + id_size = snprintf(id, id_len, + "eui.%12phN", + cur_id_str); + break; + case 16: + id_size = snprintf(id, id_len, + "eui.%16phN", + cur_id_str); + break; + default: + break; + } + break; + case 0x3: + /* NAA */ + cur_id_prio = prio; + cur_id_size = d[3]; + cur_id_str = d + 4; + switch (cur_id_size) { + case 8: + id_size = snprintf(id, id_len, + "naa.%8phN", + cur_id_str); + break; + case 16: + id_size = snprintf(id, id_len, + "naa.%16phN", + cur_id_str); + break; + default: + break; + } + break; + case 0x8: + /* SCSI name string */ + if (cur_id_size > d[3]) + break; + /* Prefer others for truncated descriptor */ + if (d[3] > id_len) { + prio = 2; + if (cur_id_prio > prio) + break; + } + cur_id_prio = prio; + cur_id_size = id_size = d[3]; + cur_id_str = d + 4; + if (cur_id_size >= id_len) + cur_id_size = id_len - 1; + memcpy(id, cur_id_str, cur_id_size); + break; + default: + break; + } + } + rcu_read_unlock(); + + return id_size; +} +EXPORT_SYMBOL(scsi_vpd_lun_id); + +/* + * scsi_vpd_tpg_id - return a target port group identifier + * @sdev: SCSI device + * + * Returns the Target Port Group identifier from the information + * froom VPD page 0x83 of the device. + * + * Returns the identifier or error on failure. + */ +int scsi_vpd_tpg_id(struct scsi_device *sdev, int *rel_id) +{ + const unsigned char *d; + const struct scsi_vpd *vpd_pg83; + int group_id = -EAGAIN, rel_port = -1; + + rcu_read_lock(); + vpd_pg83 = rcu_dereference(sdev->vpd_pg83); + if (!vpd_pg83) { + rcu_read_unlock(); + return -ENXIO; + } + + d = vpd_pg83->data + 4; + while (d < vpd_pg83->data + vpd_pg83->len) { + switch (d[1] & 0xf) { + case 0x4: + /* Relative target port */ + rel_port = get_unaligned_be16(&d[6]); + break; + case 0x5: + /* Target port group */ + group_id = get_unaligned_be16(&d[6]); + break; + default: + break; + } + d += d[3] + 4; + } + rcu_read_unlock(); + + if (group_id >= 0 && rel_id && rel_port != -1) + *rel_id = rel_port; + + return group_id; +} +EXPORT_SYMBOL(scsi_vpd_tpg_id); + +/** + * scsi_build_sense - build sense data for a command + * @scmd: scsi command for which the sense should be formatted + * @desc: Sense format (non-zero == descriptor format, + * 0 == fixed format) + * @key: Sense key + * @asc: Additional sense code + * @ascq: Additional sense code qualifier + * + **/ +void scsi_build_sense(struct scsi_cmnd *scmd, int desc, u8 key, u8 asc, u8 ascq) +{ + scsi_build_sense_buffer(desc, scmd->sense_buffer, key, asc, ascq); + scmd->result = SAM_STAT_CHECK_CONDITION; +} +EXPORT_SYMBOL_GPL(scsi_build_sense); -- cgit v1.2.3