From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/usb/core/Kconfig | 118 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 118 insertions(+) create mode 100644 drivers/usb/core/Kconfig (limited to 'drivers/usb/core/Kconfig') diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig new file mode 100644 index 000000000..351ede4b5 --- /dev/null +++ b/drivers/usb/core/Kconfig @@ -0,0 +1,118 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# USB Core configuration +# +config USB_ANNOUNCE_NEW_DEVICES + bool "USB announce new devices" + help + Say Y here if you want the USB core to always announce the + idVendor, idProduct, Manufacturer, Product, and SerialNumber + strings for every new USB device to the syslog. This option is + usually used by distro vendors to help with debugging and to + let users know what specific device was added to the machine + in what location. + + If you do not want this kind of information sent to the system + log, or have any doubts about this, say N here. + +comment "Miscellaneous USB options" + +config USB_DEFAULT_PERSIST + bool "Enable USB persist by default" + default y + help + Say N here if you don't want USB power session persistence + enabled by default. If you say N it will make suspended USB + devices that lose power get reenumerated as if they had been + unplugged, causing any mounted filesystems to be lost. The + persist feature can still be enabled for individual devices + through the power/persist sysfs node. See + Documentation/driver-api/usb/persist.rst for more info. + + If you have any questions about this, say Y here, only say N + if you know exactly what you are doing. + +config USB_FEW_INIT_RETRIES + bool "Limit USB device initialization to only a few retries" + help + When a new USB device is detected, the kernel tries very hard + to initialize and enumerate it, with lots of nested retry loops. + This almost always works, but when it fails it can take a long time. + This option tells the kernel to make only a few retry attempts, + so that the total time required for a failed initialization is + no more than 30 seconds (as required by the USB OTG spec). + + Say N here unless you require new-device enumeration failure to + occur within 30 seconds (as might be needed in an embedded + application). + +config USB_DYNAMIC_MINORS + bool "Dynamic USB minor allocation" + help + If you say Y here, the USB subsystem will use dynamic minor + allocation for any device that uses the USB major number. + This means that you can have more than 16 of a single type + of device (like USB printers). + + If you are unsure about this, say N here. + +config USB_OTG + bool "OTG support" + depends on PM + help + The most notable feature of USB OTG is support for a + "Dual-Role" device, which can act as either a device + or a host. The initial role is decided by the type of + plug inserted and can be changed later when two dual + role devices talk to each other. + + Select this only if your board has Mini-AB/Micro-AB + connector. + +config USB_OTG_PRODUCTLIST + bool "Rely on OTG and EH Targeted Peripherals List" + depends on USB + help + If you say Y here, the "otg_productlist.h" file will be used as a + product list, so USB peripherals not listed there will be + rejected during enumeration. This behavior is required by the + USB OTG and EH specification for all devices not on your product's + "Targeted Peripherals List". "Embedded Hosts" are likewise + allowed to support only a limited number of peripherals. + +config USB_OTG_DISABLE_EXTERNAL_HUB + bool "Disable external hubs" + depends on USB_OTG || EXPERT + help + If you say Y here, then Linux will refuse to enumerate + external hubs. OTG hosts are allowed to reduce hardware + and software costs by not supporting external hubs. So + are "Embedded Hosts" that don't offer OTG support. + +config USB_OTG_FSM + tristate "USB 2.0 OTG FSM implementation" + depends on USB && USB_OTG + select USB_PHY + help + Implements OTG Finite State Machine as specified in On-The-Go + and Embedded Host Supplement to the USB Revision 2.0 Specification. + +config USB_LEDS_TRIGGER_USBPORT + tristate "USB port LED trigger" + depends on USB && LEDS_TRIGGERS + help + This driver allows LEDs to be controlled by USB events. Enabling this + trigger allows specifying list of USB ports that should turn on LED + when some USB device gets connected. + +config USB_AUTOSUSPEND_DELAY + int "Default autosuspend delay" + depends on USB + default 2 + help + The default autosuspend delay in seconds. Can be overridden + with the usbcore.autosuspend command line or module parameter. + + The default value Linux has always had is 2 seconds. Change + this value if you want a different delay and cannot modify + the command line or module parameter. -- cgit v1.2.3