From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/usb/gadget/udc/s3c2410_udc.h | 99 ++++++++++++++++++++++++++++++++++++ 1 file changed, 99 insertions(+) create mode 100644 drivers/usb/gadget/udc/s3c2410_udc.h (limited to 'drivers/usb/gadget/udc/s3c2410_udc.h') diff --git a/drivers/usb/gadget/udc/s3c2410_udc.h b/drivers/usb/gadget/udc/s3c2410_udc.h new file mode 100644 index 000000000..cdbf202e5 --- /dev/null +++ b/drivers/usb/gadget/udc/s3c2410_udc.h @@ -0,0 +1,99 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * linux/drivers/usb/gadget/s3c2410_udc.h + * Samsung on-chip full speed USB device controllers + * + * Copyright (C) 2004-2007 Herbert Pötzl - Arnaud Patard + * Additional cleanups by Ben Dooks + */ + +#ifndef _S3C2410_UDC_H +#define _S3C2410_UDC_H + +struct s3c2410_ep { + struct list_head queue; + unsigned long last_io; /* jiffies timestamp */ + struct usb_gadget *gadget; + struct s3c2410_udc *dev; + struct usb_ep ep; + u8 num; + + unsigned short fifo_size; + u8 bEndpointAddress; + u8 bmAttributes; + + unsigned halted : 1; + unsigned already_seen : 1; + unsigned setup_stage : 1; +}; + + +/* Warning : ep0 has a fifo of 16 bytes */ +/* Don't try to set 32 or 64 */ +/* also testusb 14 fails wit 16 but is */ +/* fine with 8 */ +#define EP0_FIFO_SIZE 8 +#define EP_FIFO_SIZE 64 +#define DEFAULT_POWER_STATE 0x00 + +#define S3C2440_EP_FIFO_SIZE 128 + +static const char ep0name [] = "ep0"; + +static const char *const ep_name[] = { + ep0name, /* everyone has ep0 */ + /* s3c2410 four bidirectional bulk endpoints */ + "ep1-bulk", "ep2-bulk", "ep3-bulk", "ep4-bulk", +}; + +#define S3C2410_ENDPOINTS ARRAY_SIZE(ep_name) + +struct s3c2410_request { + struct list_head queue; /* ep's requests */ + struct usb_request req; +}; + +enum ep0_state { + EP0_IDLE, + EP0_IN_DATA_PHASE, + EP0_OUT_DATA_PHASE, + EP0_END_XFER, + EP0_STALL, +}; + +static const char *ep0states[]= { + "EP0_IDLE", + "EP0_IN_DATA_PHASE", + "EP0_OUT_DATA_PHASE", + "EP0_END_XFER", + "EP0_STALL", +}; + +struct s3c2410_udc { + spinlock_t lock; + + struct s3c2410_ep ep[S3C2410_ENDPOINTS]; + int address; + struct usb_gadget gadget; + struct usb_gadget_driver *driver; + struct s3c2410_request fifo_req; + u8 fifo_buf[EP_FIFO_SIZE]; + u16 devstatus; + + u32 port_status; + int ep0state; + + struct gpio_desc *vbus_gpiod; + struct gpio_desc *pullup_gpiod; + + unsigned got_irq : 1; + + unsigned req_std : 1; + unsigned req_config : 1; + unsigned req_pending : 1; + u8 vbus; + int irq; +}; +#define to_s3c2410(g) (container_of((g), struct s3c2410_udc, gadget)) + +#endif -- cgit v1.2.3