From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/usb/serial/omninet.c | 179 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 179 insertions(+) create mode 100644 drivers/usb/serial/omninet.c (limited to 'drivers/usb/serial/omninet.c') diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c new file mode 100644 index 000000000..41f1b872d --- /dev/null +++ b/drivers/usb/serial/omninet.c @@ -0,0 +1,179 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * USB ZyXEL omni.net driver + * + * Copyright (C) 2013,2017 Johan Hovold + * + * See Documentation/usb/usb-serial.rst for more information on using this + * driver + * + * Please report both successes and troubles to the author at omninet@kroah.com + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRIVER_AUTHOR "Alessandro Zummo" +#define DRIVER_DESC "USB ZyXEL omni.net Driver" + +#define ZYXEL_VENDOR_ID 0x0586 +#define ZYXEL_OMNINET_ID 0x1000 +#define ZYXEL_OMNI_56K_PLUS_ID 0x1500 +/* This one seems to be a re-branded ZyXEL device */ +#define BT_IGNITIONPRO_ID 0x2000 + +/* function prototypes */ +static void omninet_process_read_urb(struct urb *urb); +static int omninet_prepare_write_buffer(struct usb_serial_port *port, + void *buf, size_t count); +static int omninet_calc_num_ports(struct usb_serial *serial, + struct usb_serial_endpoints *epds); +static int omninet_port_probe(struct usb_serial_port *port); +static void omninet_port_remove(struct usb_serial_port *port); + +static const struct usb_device_id id_table[] = { + { USB_DEVICE(ZYXEL_VENDOR_ID, ZYXEL_OMNINET_ID) }, + { USB_DEVICE(ZYXEL_VENDOR_ID, ZYXEL_OMNI_56K_PLUS_ID) }, + { USB_DEVICE(ZYXEL_VENDOR_ID, BT_IGNITIONPRO_ID) }, + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, id_table); + +static struct usb_serial_driver zyxel_omninet_device = { + .driver = { + .owner = THIS_MODULE, + .name = "omninet", + }, + .description = "ZyXEL - omni.net usb", + .id_table = id_table, + .num_bulk_out = 2, + .calc_num_ports = omninet_calc_num_ports, + .port_probe = omninet_port_probe, + .port_remove = omninet_port_remove, + .process_read_urb = omninet_process_read_urb, + .prepare_write_buffer = omninet_prepare_write_buffer, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &zyxel_omninet_device, NULL +}; + + +/* + * The protocol. + * + * The omni.net always exchange 64 bytes of data with the host. The first + * four bytes are the control header. + * + * oh_seq is a sequence number. Don't know if/how it's used. + * oh_len is the length of the data bytes in the packet. + * oh_xxx Bit-mapped, related to handshaking and status info. + * I normally set it to 0x03 in transmitted frames. + * 7: Active when the TA is in a CONNECTed state. + * 6: unknown + * 5: handshaking, unknown + * 4: handshaking, unknown + * 3: unknown, usually 0 + * 2: unknown, usually 0 + * 1: handshaking, unknown, usually set to 1 in transmitted frames + * 0: handshaking, unknown, usually set to 1 in transmitted frames + * oh_pad Probably a pad byte. + * + * After the header you will find data bytes if oh_len was greater than zero. + */ +struct omninet_header { + __u8 oh_seq; + __u8 oh_len; + __u8 oh_xxx; + __u8 oh_pad; +}; + +struct omninet_data { + __u8 od_outseq; /* Sequence number for bulk_out URBs */ +}; + +static int omninet_calc_num_ports(struct usb_serial *serial, + struct usb_serial_endpoints *epds) +{ + /* We need only the second bulk-out for our single-port device. */ + epds->bulk_out[0] = epds->bulk_out[1]; + epds->num_bulk_out = 1; + + return 1; +} + +static int omninet_port_probe(struct usb_serial_port *port) +{ + struct omninet_data *od; + + od = kzalloc(sizeof(*od), GFP_KERNEL); + if (!od) + return -ENOMEM; + + usb_set_serial_port_data(port, od); + + return 0; +} + +static void omninet_port_remove(struct usb_serial_port *port) +{ + struct omninet_data *od; + + od = usb_get_serial_port_data(port); + kfree(od); +} + +#define OMNINET_HEADERLEN 4 +#define OMNINET_BULKOUTSIZE 64 +#define OMNINET_PAYLOADSIZE (OMNINET_BULKOUTSIZE - OMNINET_HEADERLEN) + +static void omninet_process_read_urb(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + const struct omninet_header *hdr = urb->transfer_buffer; + const unsigned char *data; + size_t data_len; + + if (urb->actual_length <= OMNINET_HEADERLEN || !hdr->oh_len) + return; + + data = (char *)urb->transfer_buffer + OMNINET_HEADERLEN; + data_len = min_t(size_t, urb->actual_length - OMNINET_HEADERLEN, + hdr->oh_len); + tty_insert_flip_string(&port->port, data, data_len); + tty_flip_buffer_push(&port->port); +} + +static int omninet_prepare_write_buffer(struct usb_serial_port *port, + void *buf, size_t count) +{ + struct omninet_data *od = usb_get_serial_port_data(port); + struct omninet_header *header = buf; + + count = min_t(size_t, count, OMNINET_PAYLOADSIZE); + + count = kfifo_out_locked(&port->write_fifo, buf + OMNINET_HEADERLEN, + count, &port->lock); + + header->oh_seq = od->od_outseq++; + header->oh_len = count; + header->oh_xxx = 0x03; + header->oh_pad = 0x00; + + /* always 64 bytes */ + return OMNINET_BULKOUTSIZE; +} + +module_usb_serial_driver(serial_drivers, id_table); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3