From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- rust/alloc/README.md | 33 + rust/alloc/alloc.rs | 440 ++++++ rust/alloc/borrow.rs | 498 +++++++ rust/alloc/boxed.rs | 2028 ++++++++++++++++++++++++++ rust/alloc/collections/mod.rs | 156 ++ rust/alloc/lib.rs | 244 ++++ rust/alloc/raw_vec.rs | 527 +++++++ rust/alloc/slice.rs | 1204 +++++++++++++++ rust/alloc/vec/drain.rs | 186 +++ rust/alloc/vec/drain_filter.rs | 145 ++ rust/alloc/vec/into_iter.rs | 366 +++++ rust/alloc/vec/is_zero.rs | 120 ++ rust/alloc/vec/mod.rs | 3140 ++++++++++++++++++++++++++++++++++++++++ rust/alloc/vec/partial_eq.rs | 49 + 14 files changed, 9136 insertions(+) create mode 100644 rust/alloc/README.md create mode 100644 rust/alloc/alloc.rs create mode 100644 rust/alloc/borrow.rs create mode 100644 rust/alloc/boxed.rs create mode 100644 rust/alloc/collections/mod.rs create mode 100644 rust/alloc/lib.rs create mode 100644 rust/alloc/raw_vec.rs create mode 100644 rust/alloc/slice.rs create mode 100644 rust/alloc/vec/drain.rs create mode 100644 rust/alloc/vec/drain_filter.rs create mode 100644 rust/alloc/vec/into_iter.rs create mode 100644 rust/alloc/vec/is_zero.rs create mode 100644 rust/alloc/vec/mod.rs create mode 100644 rust/alloc/vec/partial_eq.rs (limited to 'rust/alloc') diff --git a/rust/alloc/README.md b/rust/alloc/README.md new file mode 100644 index 000000000..c89c75372 --- /dev/null +++ b/rust/alloc/README.md @@ -0,0 +1,33 @@ +# `alloc` + +These source files come from the Rust standard library, hosted in +the repository, licensed under +"Apache-2.0 OR MIT" and adapted for kernel use. For copyright details, +see . + +Please note that these files should be kept as close as possible to +upstream. In general, only additions should be performed (e.g. new +methods). Eventually, changes should make it into upstream so that, +at some point, this fork can be dropped from the kernel tree. + + +## Rationale + +On one hand, kernel folks wanted to keep `alloc` in-tree to have more +freedom in both workflow and actual features if actually needed +(e.g. receiver types if we ended up using them), which is reasonable. + +On the other hand, Rust folks wanted to keep `alloc` as close as +upstream as possible and avoid as much divergence as possible, which +is also reasonable. + +We agreed on a middle-ground: we would keep a subset of `alloc` +in-tree that would be as small and as close as possible to upstream. +Then, upstream can start adding the functions that we add to `alloc` +etc., until we reach a point where the kernel already knows exactly +what it needs in `alloc` and all the new methods are merged into +upstream, so that we can drop `alloc` from the kernel tree and go back +to using the upstream one. + +By doing this, the kernel can go a bit faster now, and Rust can +slowly incorporate and discuss the changes as needed. diff --git a/rust/alloc/alloc.rs b/rust/alloc/alloc.rs new file mode 100644 index 000000000..ca224a541 --- /dev/null +++ b/rust/alloc/alloc.rs @@ -0,0 +1,440 @@ +// SPDX-License-Identifier: Apache-2.0 OR MIT + +//! Memory allocation APIs + +#![stable(feature = "alloc_module", since = "1.28.0")] + +#[cfg(not(test))] +use core::intrinsics; +use core::intrinsics::{min_align_of_val, size_of_val}; + +use core::ptr::Unique; +#[cfg(not(test))] +use core::ptr::{self, NonNull}; + +#[stable(feature = "alloc_module", since = "1.28.0")] +#[doc(inline)] +pub use core::alloc::*; + +use core::marker::Destruct; + +#[cfg(test)] +mod tests; + +extern "Rust" { + // These are the magic symbols to call the global allocator. rustc generates + // them to call `__rg_alloc` etc. if there is a `#[global_allocator]` attribute + // (the code expanding that attribute macro generates those functions), or to call + // the default implementations in libstd (`__rdl_alloc` etc. in `library/std/src/alloc.rs`) + // otherwise. + // The rustc fork of LLVM also special-cases these function names to be able to optimize them + // like `malloc`, `realloc`, and `free`, respectively. + #[rustc_allocator] + #[rustc_allocator_nounwind] + fn __rust_alloc(size: usize, align: usize) -> *mut u8; + #[rustc_allocator_nounwind] + fn __rust_dealloc(ptr: *mut u8, size: usize, align: usize); + #[rustc_allocator_nounwind] + fn __rust_realloc(ptr: *mut u8, old_size: usize, align: usize, new_size: usize) -> *mut u8; + #[rustc_allocator_nounwind] + fn __rust_alloc_zeroed(size: usize, align: usize) -> *mut u8; +} + +/// The global memory allocator. +/// +/// This type implements the [`Allocator`] trait by forwarding calls +/// to the allocator registered with the `#[global_allocator]` attribute +/// if there is one, or the `std` crate’s default. +/// +/// Note: while this type is unstable, the functionality it provides can be +/// accessed through the [free functions in `alloc`](self#functions). +#[unstable(feature = "allocator_api", issue = "32838")] +#[derive(Copy, Clone, Default, Debug)] +#[cfg(not(test))] +pub struct Global; + +#[cfg(test)] +pub use std::alloc::Global; + +/// Allocate memory with the global allocator. +/// +/// This function forwards calls to the [`GlobalAlloc::alloc`] method +/// of the allocator registered with the `#[global_allocator]` attribute +/// if there is one, or the `std` crate’s default. +/// +/// This function is expected to be deprecated in favor of the `alloc` method +/// of the [`Global`] type when it and the [`Allocator`] trait become stable. +/// +/// # Safety +/// +/// See [`GlobalAlloc::alloc`]. +/// +/// # Examples +/// +/// ``` +/// use std::alloc::{alloc, dealloc, Layout}; +/// +/// unsafe { +/// let layout = Layout::new::(); +/// let ptr = alloc(layout); +/// +/// *(ptr as *mut u16) = 42; +/// assert_eq!(*(ptr as *mut u16), 42); +/// +/// dealloc(ptr, layout); +/// } +/// ``` +#[stable(feature = "global_alloc", since = "1.28.0")] +#[must_use = "losing the pointer will leak memory"] +#[inline] +pub unsafe fn alloc(layout: Layout) -> *mut u8 { + unsafe { __rust_alloc(layout.size(), layout.align()) } +} + +/// Deallocate memory with the global allocator. +/// +/// This function forwards calls to the [`GlobalAlloc::dealloc`] method +/// of the allocator registered with the `#[global_allocator]` attribute +/// if there is one, or the `std` crate’s default. +/// +/// This function is expected to be deprecated in favor of the `dealloc` method +/// of the [`Global`] type when it and the [`Allocator`] trait become stable. +/// +/// # Safety +/// +/// See [`GlobalAlloc::dealloc`]. +#[stable(feature = "global_alloc", since = "1.28.0")] +#[inline] +pub unsafe fn dealloc(ptr: *mut u8, layout: Layout) { + unsafe { __rust_dealloc(ptr, layout.size(), layout.align()) } +} + +/// Reallocate memory with the global allocator. +/// +/// This function forwards calls to the [`GlobalAlloc::realloc`] method +/// of the allocator registered with the `#[global_allocator]` attribute +/// if there is one, or the `std` crate’s default. +/// +/// This function is expected to be deprecated in favor of the `realloc` method +/// of the [`Global`] type when it and the [`Allocator`] trait become stable. +/// +/// # Safety +/// +/// See [`GlobalAlloc::realloc`]. +#[stable(feature = "global_alloc", since = "1.28.0")] +#[must_use = "losing the pointer will leak memory"] +#[inline] +pub unsafe fn realloc(ptr: *mut u8, layout: Layout, new_size: usize) -> *mut u8 { + unsafe { __rust_realloc(ptr, layout.size(), layout.align(), new_size) } +} + +/// Allocate zero-initialized memory with the global allocator. +/// +/// This function forwards calls to the [`GlobalAlloc::alloc_zeroed`] method +/// of the allocator registered with the `#[global_allocator]` attribute +/// if there is one, or the `std` crate’s default. +/// +/// This function is expected to be deprecated in favor of the `alloc_zeroed` method +/// of the [`Global`] type when it and the [`Allocator`] trait become stable. +/// +/// # Safety +/// +/// See [`GlobalAlloc::alloc_zeroed`]. +/// +/// # Examples +/// +/// ``` +/// use std::alloc::{alloc_zeroed, dealloc, Layout}; +/// +/// unsafe { +/// let layout = Layout::new::(); +/// let ptr = alloc_zeroed(layout); +/// +/// assert_eq!(*(ptr as *mut u16), 0); +/// +/// dealloc(ptr, layout); +/// } +/// ``` +#[stable(feature = "global_alloc", since = "1.28.0")] +#[must_use = "losing the pointer will leak memory"] +#[inline] +pub unsafe fn alloc_zeroed(layout: Layout) -> *mut u8 { + unsafe { __rust_alloc_zeroed(layout.size(), layout.align()) } +} + +#[cfg(not(test))] +impl Global { + #[inline] + fn alloc_impl(&self, layout: Layout, zeroed: bool) -> Result, AllocError> { + match layout.size() { + 0 => Ok(NonNull::slice_from_raw_parts(layout.dangling(), 0)), + // SAFETY: `layout` is non-zero in size, + size => unsafe { + let raw_ptr = if zeroed { alloc_zeroed(layout) } else { alloc(layout) }; + let ptr = NonNull::new(raw_ptr).ok_or(AllocError)?; + Ok(NonNull::slice_from_raw_parts(ptr, size)) + }, + } + } + + // SAFETY: Same as `Allocator::grow` + #[inline] + unsafe fn grow_impl( + &self, + ptr: NonNull, + old_layout: Layout, + new_layout: Layout, + zeroed: bool, + ) -> Result, AllocError> { + debug_assert!( + new_layout.size() >= old_layout.size(), + "`new_layout.size()` must be greater than or equal to `old_layout.size()`" + ); + + match old_layout.size() { + 0 => self.alloc_impl(new_layout, zeroed), + + // SAFETY: `new_size` is non-zero as `old_size` is greater than or equal to `new_size` + // as required by safety conditions. Other conditions must be upheld by the caller + old_size if old_layout.align() == new_layout.align() => unsafe { + let new_size = new_layout.size(); + + // `realloc` probably checks for `new_size >= old_layout.size()` or something similar. + intrinsics::assume(new_size >= old_layout.size()); + + let raw_ptr = realloc(ptr.as_ptr(), old_layout, new_size); + let ptr = NonNull::new(raw_ptr).ok_or(AllocError)?; + if zeroed { + raw_ptr.add(old_size).write_bytes(0, new_size - old_size); + } + Ok(NonNull::slice_from_raw_parts(ptr, new_size)) + }, + + // SAFETY: because `new_layout.size()` must be greater than or equal to `old_size`, + // both the old and new memory allocation are valid for reads and writes for `old_size` + // bytes. Also, because the old allocation wasn't yet deallocated, it cannot overlap + // `new_ptr`. Thus, the call to `copy_nonoverlapping` is safe. The safety contract + // for `dealloc` must be upheld by the caller. + old_size => unsafe { + let new_ptr = self.alloc_impl(new_layout, zeroed)?; + ptr::copy_nonoverlapping(ptr.as_ptr(), new_ptr.as_mut_ptr(), old_size); + self.deallocate(ptr, old_layout); + Ok(new_ptr) + }, + } + } +} + +#[unstable(feature = "allocator_api", issue = "32838")] +#[cfg(not(test))] +unsafe impl Allocator for Global { + #[inline] + fn allocate(&self, layout: Layout) -> Result, AllocError> { + self.alloc_impl(layout, false) + } + + #[inline] + fn allocate_zeroed(&self, layout: Layout) -> Result, AllocError> { + self.alloc_impl(layout, true) + } + + #[inline] + unsafe fn deallocate(&self, ptr: NonNull, layout: Layout) { + if layout.size() != 0 { + // SAFETY: `layout` is non-zero in size, + // other conditions must be upheld by the caller + unsafe { dealloc(ptr.as_ptr(), layout) } + } + } + + #[inline] + unsafe fn grow( + &self, + ptr: NonNull, + old_layout: Layout, + new_layout: Layout, + ) -> Result, AllocError> { + // SAFETY: all conditions must be upheld by the caller + unsafe { self.grow_impl(ptr, old_layout, new_layout, false) } + } + + #[inline] + unsafe fn grow_zeroed( + &self, + ptr: NonNull, + old_layout: Layout, + new_layout: Layout, + ) -> Result, AllocError> { + // SAFETY: all conditions must be upheld by the caller + unsafe { self.grow_impl(ptr, old_layout, new_layout, true) } + } + + #[inline] + unsafe fn shrink( + &self, + ptr: NonNull, + old_layout: Layout, + new_layout: Layout, + ) -> Result, AllocError> { + debug_assert!( + new_layout.size() <= old_layout.size(), + "`new_layout.size()` must be smaller than or equal to `old_layout.size()`" + ); + + match new_layout.size() { + // SAFETY: conditions must be upheld by the caller + 0 => unsafe { + self.deallocate(ptr, old_layout); + Ok(NonNull::slice_from_raw_parts(new_layout.dangling(), 0)) + }, + + // SAFETY: `new_size` is non-zero. Other conditions must be upheld by the caller + new_size if old_layout.align() == new_layout.align() => unsafe { + // `realloc` probably checks for `new_size <= old_layout.size()` or something similar. + intrinsics::assume(new_size <= old_layout.size()); + + let raw_ptr = realloc(ptr.as_ptr(), old_layout, new_size); + let ptr = NonNull::new(raw_ptr).ok_or(AllocError)?; + Ok(NonNull::slice_from_raw_parts(ptr, new_size)) + }, + + // SAFETY: because `new_size` must be smaller than or equal to `old_layout.size()`, + // both the old and new memory allocation are valid for reads and writes for `new_size` + // bytes. Also, because the old allocation wasn't yet deallocated, it cannot overlap + // `new_ptr`. Thus, the call to `copy_nonoverlapping` is safe. The safety contract + // for `dealloc` must be upheld by the caller. + new_size => unsafe { + let new_ptr = self.allocate(new_layout)?; + ptr::copy_nonoverlapping(ptr.as_ptr(), new_ptr.as_mut_ptr(), new_size); + self.deallocate(ptr, old_layout); + Ok(new_ptr) + }, + } + } +} + +/// The allocator for unique pointers. +#[cfg(all(not(no_global_oom_handling), not(test)))] +#[lang = "exchange_malloc"] +#[inline] +unsafe fn exchange_malloc(size: usize, align: usize) -> *mut u8 { + let layout = unsafe { Layout::from_size_align_unchecked(size, align) }; + match Global.allocate(layout) { + Ok(ptr) => ptr.as_mut_ptr(), + Err(_) => handle_alloc_error(layout), + } +} + +#[cfg_attr(not(test), lang = "box_free")] +#[inline] +#[rustc_const_unstable(feature = "const_box", issue = "92521")] +// This signature has to be the same as `Box`, otherwise an ICE will happen. +// When an additional parameter to `Box` is added (like `A: Allocator`), this has to be added here as +// well. +// For example if `Box` is changed to `struct Box(Unique, A)`, +// this function has to be changed to `fn box_free(Unique, A)` as well. +pub(crate) const unsafe fn box_free( + ptr: Unique, + alloc: A, +) { + unsafe { + let size = size_of_val(ptr.as_ref()); + let align = min_align_of_val(ptr.as_ref()); + let layout = Layout::from_size_align_unchecked(size, align); + alloc.deallocate(From::from(ptr.cast()), layout) + } +} + +// # Allocation error handler + +#[cfg(not(no_global_oom_handling))] +extern "Rust" { + // This is the magic symbol to call the global alloc error handler. rustc generates + // it to call `__rg_oom` if there is a `#[alloc_error_handler]`, or to call the + // default implementations below (`__rdl_oom`) otherwise. + fn __rust_alloc_error_handler(size: usize, align: usize) -> !; +} + +/// Abort on memory allocation error or failure. +/// +/// Callers of memory allocation APIs wishing to abort computation +/// in response to an allocation error are encouraged to call this function, +/// rather than directly invoking `panic!` or similar. +/// +/// The default behavior of this function is to print a message to standard error +/// and abort the process. +/// It can be replaced with [`set_alloc_error_hook`] and [`take_alloc_error_hook`]. +/// +/// [`set_alloc_error_hook`]: ../../std/alloc/fn.set_alloc_error_hook.html +/// [`take_alloc_error_hook`]: ../../std/alloc/fn.take_alloc_error_hook.html +#[stable(feature = "global_alloc", since = "1.28.0")] +#[rustc_const_unstable(feature = "const_alloc_error", issue = "92523")] +#[cfg(all(not(no_global_oom_handling), not(test)))] +#[cold] +pub const fn handle_alloc_error(layout: Layout) -> ! { + const fn ct_error(_: Layout) -> ! { + panic!("allocation failed"); + } + + fn rt_error(layout: Layout) -> ! { + unsafe { + __rust_alloc_error_handler(layout.size(), layout.align()); + } + } + + unsafe { core::intrinsics::const_eval_select((layout,), ct_error, rt_error) } +} + +// For alloc test `std::alloc::handle_alloc_error` can be used directly. +#[cfg(all(not(no_global_oom_handling), test))] +pub use std::alloc::handle_alloc_error; + +#[cfg(all(not(no_global_oom_handling), not(test)))] +#[doc(hidden)] +#[allow(unused_attributes)] +#[unstable(feature = "alloc_internals", issue = "none")] +pub mod __alloc_error_handler { + use crate::alloc::Layout; + + // called via generated `__rust_alloc_error_handler` + + // if there is no `#[alloc_error_handler]` + #[rustc_std_internal_symbol] + pub unsafe extern "C-unwind" fn __rdl_oom(size: usize, _align: usize) -> ! { + panic!("memory allocation of {size} bytes failed") + } + + // if there is an `#[alloc_error_handler]` + #[rustc_std_internal_symbol] + pub unsafe extern "C-unwind" fn __rg_oom(size: usize, align: usize) -> ! { + let layout = unsafe { Layout::from_size_align_unchecked(size, align) }; + extern "Rust" { + #[lang = "oom"] + fn oom_impl(layout: Layout) -> !; + } + unsafe { oom_impl(layout) } + } +} + +/// Specialize clones into pre-allocated, uninitialized memory. +/// Used by `Box::clone` and `Rc`/`Arc::make_mut`. +pub(crate) trait WriteCloneIntoRaw: Sized { + unsafe fn write_clone_into_raw(&self, target: *mut Self); +} + +impl WriteCloneIntoRaw for T { + #[inline] + default unsafe fn write_clone_into_raw(&self, target: *mut Self) { + // Having allocated *first* may allow the optimizer to create + // the cloned value in-place, skipping the local and move. + unsafe { target.write(self.clone()) }; + } +} + +impl WriteCloneIntoRaw for T { + #[inline] + unsafe fn write_clone_into_raw(&self, target: *mut Self) { + // We can always copy in-place, without ever involving a local value. + unsafe { target.copy_from_nonoverlapping(self, 1) }; + } +} diff --git a/rust/alloc/borrow.rs b/rust/alloc/borrow.rs new file mode 100644 index 000000000..dde495720 --- /dev/null +++ b/rust/alloc/borrow.rs @@ -0,0 +1,498 @@ +// SPDX-License-Identifier: Apache-2.0 OR MIT + +//! A module for working with borrowed data. + +#![stable(feature = "rust1", since = "1.0.0")] + +use core::cmp::Ordering; +use core::hash::{Hash, Hasher}; +use core::ops::Deref; +#[cfg(not(no_global_oom_handling))] +use core::ops::{Add, AddAssign}; + +#[stable(feature = "rust1", since = "1.0.0")] +pub use core::borrow::{Borrow, BorrowMut}; + +use core::fmt; +#[cfg(not(no_global_oom_handling))] +use crate::string::String; + +use Cow::*; + +#[stable(feature = "rust1", since = "1.0.0")] +impl<'a, B: ?Sized> Borrow for Cow<'a, B> +where + B: ToOwned, + ::Owned: 'a, +{ + fn borrow(&self) -> &B { + &**self + } +} + +/// A generalization of `Clone` to borrowed data. +/// +/// Some types make it possible to go from borrowed to owned, usually by +/// implementing the `Clone` trait. But `Clone` works only for going from `&T` +/// to `T`. The `ToOwned` trait generalizes `Clone` to construct owned data +/// from any borrow of a given type. +#[cfg_attr(not(test), rustc_diagnostic_item = "ToOwned")] +#[stable(feature = "rust1", since = "1.0.0")] +pub trait ToOwned { + /// The resulting type after obtaining ownership. + #[stable(feature = "rust1", since = "1.0.0")] + type Owned: Borrow; + + /// Creates owned data from borrowed data, usually by cloning. + /// + /// # Examples + /// + /// Basic usage: + /// + /// ``` + /// let s: &str = "a"; + /// let ss: String = s.to_owned(); + /// + /// let v: &[i32] = &[1, 2]; + /// let vv: Vec = v.to_owned(); + /// ``` + #[stable(feature = "rust1", since = "1.0.0")] + #[must_use = "cloning is often expensive and is not expected to have side effects"] + fn to_owned(&self) -> Self::Owned; + + /// Uses borrowed data to replace owned data, usually by cloning. + /// + /// This is borrow-generalized version of `Clone::clone_from`. + /// + /// # Examples + /// + /// Basic usage: + /// + /// ``` + /// # #![feature(toowned_clone_into)] + /// let mut s: String = String::new(); + /// "hello".clone_into(&mut s); + /// + /// let mut v: Vec = Vec::new(); + /// [1, 2][..].clone_into(&mut v); + /// ``` + #[unstable(feature = "toowned_clone_into", reason = "recently added", issue = "41263")] + fn clone_into(&self, target: &mut Self::Owned) { + *target = self.to_owned(); + } +} + +#[stable(feature = "rust1", since = "1.0.0")] +impl ToOwned for T +where + T: Clone, +{ + type Owned = T; + fn to_owned(&self) -> T { + self.clone() + } + + fn clone_into(&self, target: &mut T) { + target.clone_from(self); + } +} + +/// A clone-on-write smart pointer. +/// +/// The type `Cow` is a smart pointer providing clone-on-write functionality: it +/// can enclose and provide immutable access to borrowed data, and clone the +/// data lazily when mutation or ownership is required. The type is designed to +/// work with general borrowed data via the `Borrow` trait. +/// +/// `Cow` implements `Deref`, which means that you can call +/// non-mutating methods directly on the data it encloses. If mutation +/// is desired, `to_mut` will obtain a mutable reference to an owned +/// value, cloning if necessary. +/// +/// If you need reference-counting pointers, note that +/// [`Rc::make_mut`][crate::rc::Rc::make_mut] and +/// [`Arc::make_mut`][crate::sync::Arc::make_mut] can provide clone-on-write +/// functionality as well. +/// +/// # Examples +/// +/// ``` +/// use std::borrow::Cow; +/// +/// fn abs_all(input: &mut Cow<[i32]>) { +/// for i in 0..input.len() { +/// let v = input[i]; +/// if v < 0 { +/// // Clones into a vector if not already owned. +/// input.to_mut()[i] = -v; +/// } +/// } +/// } +/// +/// // No clone occurs because `input` doesn't need to be mutated. +/// let slice = [0, 1, 2]; +/// let mut input = Cow::from(&slice[..]); +/// abs_all(&mut input); +/// +/// // Clone occurs because `input` needs to be mutated. +/// let slice = [-1, 0, 1]; +/// let mut input = Cow::from(&slice[..]); +/// abs_all(&mut input); +/// +/// // No clone occurs because `input` is already owned. +/// let mut input = Cow::from(vec![-1, 0, 1]); +/// abs_all(&mut input); +/// ``` +/// +/// Another example showing how to keep `Cow` in a struct: +/// +/// ``` +/// use std::borrow::Cow; +/// +/// struct Items<'a, X: 'a> where [X]: ToOwned> { +/// values: Cow<'a, [X]>, +/// } +/// +/// impl<'a, X: Clone + 'a> Items<'a, X> where [X]: ToOwned> { +/// fn new(v: Cow<'a, [X]>) -> Self { +/// Items { values: v } +/// } +/// } +/// +/// // Creates a container from borrowed values of a slice +/// let readonly = [1, 2]; +/// let borrowed = Items::new((&readonly[..]).into()); +/// match borrowed { +/// Items { values: Cow::Borrowed(b) } => println!("borrowed {b:?}"), +/// _ => panic!("expect borrowed value"), +/// } +/// +/// let mut clone_on_write = borrowed; +/// // Mutates the data from slice into owned vec and pushes a new value on top +/// clone_on_write.values.to_mut().push(3); +/// println!("clone_on_write = {:?}", clone_on_write.values); +/// +/// // The data was mutated. Let's check it out. +/// match clone_on_write { +/// Items { values: Cow::Owned(_) } => println!("clone_on_write contains owned data"), +/// _ => panic!("expect owned data"), +/// } +/// ``` +#[stable(feature = "rust1", since = "1.0.0")] +#[cfg_attr(not(test), rustc_diagnostic_item = "Cow")] +pub enum Cow<'a, B: ?Sized + 'a> +where + B: ToOwned, +{ + /// Borrowed data. + #[stable(feature = "rust1", since = "1.0.0")] + Borrowed(#[stable(feature = "rust1", since = "1.0.0")] &'a B), + + /// Owned data. + #[stable(feature = "rust1", since = "1.0.0")] + Owned(#[stable(feature = "rust1", since = "1.0.0")] ::Owned), +} + +#[stable(feature = "rust1", since = "1.0.0")] +impl Clone for Cow<'_, B> { + fn clone(&self) -> Self { + match *self { + Borrowed(b) => Borrowed(b), + Owned(ref o) => { + let b: &B = o.borrow(); + Owned(b.to_owned()) + } + } + } + + fn clone_from(&mut self, source: &Self) { + match (self, source) { + (&mut Owned(ref mut dest), &Owned(ref o)) => o.borrow().clone_into(dest), + (t, s) => *t = s.clone(), + } + } +} + +impl Cow<'_, B> { + /// Returns true if the data is borrowed, i.e. if `to_mut` would require additional work. + /// + /// # Examples + /// + /// ``` + /// #![feature(cow_is_borrowed)] + /// use std::borrow::Cow; + /// + /// let cow = Cow::Borrowed("moo"); + /// assert!(cow.is_borrowed()); + /// + /// let bull: Cow<'_, str> = Cow::Owned("...moo?".to_string()); + /// assert!(!bull.is_borrowed()); + /// ``` + #[unstable(feature = "cow_is_borrowed", issue = "65143")] + #[rustc_const_unstable(feature = "const_cow_is_borrowed", issue = "65143")] + pub const fn is_borrowed(&self) -> bool { + match *self { + Borrowed(_) => true, + Owned(_) => false, + } + } + + /// Returns true if the data is owned, i.e. if `to_mut` would be a no-op. + /// + /// # Examples + /// + /// ``` + /// #![feature(cow_is_borrowed)] + /// use std::borrow::Cow; + /// + /// let cow: Cow<'_, str> = Cow::Owned("moo".to_string()); + /// assert!(cow.is_owned()); + /// + /// let bull = Cow::Borrowed("...moo?"); + /// assert!(!bull.is_owned()); + /// ``` + #[unstable(feature = "cow_is_borrowed", issue = "65143")] + #[rustc_const_unstable(feature = "const_cow_is_borrowed", issue = "65143")] + pub const fn is_owned(&self) -> bool { + !self.is_borrowed() + } + + /// Acquires a mutable reference to the owned form of the data. + /// + /// Clones the data if it is not already owned. + /// + /// # Examples + /// + /// ``` + /// use std::borrow::Cow; + /// + /// let mut cow = Cow::Borrowed("foo"); + /// cow.to_mut().make_ascii_uppercase(); + /// + /// assert_eq!( + /// cow, + /// Cow::Owned(String::from("FOO")) as Cow + /// ); + /// ``` + #[stable(feature = "rust1", since = "1.0.0")] + pub fn to_mut(&mut self) -> &mut ::Owned { + match *self { + Borrowed(borrowed) => { + *self = Owned(borrowed.to_owned()); + match *self { + Borrowed(..) => unreachable!(), + Owned(ref mut owned) => owned, + } + } + Owned(ref mut owned) => owned, + } + } + + /// Extracts the owned data. + /// + /// Clones the data if it is not already owned. + /// + /// # Examples + /// + /// Calling `into_owned` on a `Cow::Borrowed` returns a clone of the borrowed data: + /// + /// ``` + /// use std::borrow::Cow; + /// + /// let s = "Hello world!"; + /// let cow = Cow::Borrowed(s); + /// + /// assert_eq!( + /// cow.into_owned(), + /// String::from(s) + /// ); + /// ``` + /// + /// Calling `into_owned` on a `Cow::Owned` returns the owned data. The data is moved out of the + /// `Cow` without being cloned. + /// + /// ``` + /// use std::borrow::Cow; + /// + /// let s = "Hello world!"; + /// let cow: Cow = Cow::Owned(String::from(s)); + /// + /// assert_eq!( + /// cow.into_owned(), + /// String::from(s) + /// ); + /// ``` + #[stable(feature = "rust1", since = "1.0.0")] + pub fn into_owned(self) -> ::Owned { + match self { + Borrowed(borrowed) => borrowed.to_owned(), + Owned(owned) => owned, + } + } +} + +#[stable(feature = "rust1", since = "1.0.0")] +#[rustc_const_unstable(feature = "const_deref", issue = "88955")] +impl const Deref for Cow<'_, B> +where + B::Owned: ~const Borrow, +{ + type Target = B; + + fn deref(&self) -> &B { + match *self { + Borrowed(borrowed) => borrowed, + Owned(ref owned) => owned.borrow(), + } + } +} + +#[stable(feature = "rust1", since = "1.0.0")] +impl Eq for Cow<'_, B> where B: Eq + ToOwned {} + +#[stable(feature = "rust1", since = "1.0.0")] +impl Ord for Cow<'_, B> +where + B: Ord + ToOwned, +{ + #[inline] + fn cmp(&self, other: &Self) -> Ordering { + Ord::cmp(&**self, &**other) + } +} + +#[stable(feature = "rust1", since = "1.0.0")] +impl<'a, 'b, B: ?Sized, C: ?Sized> PartialEq> for Cow<'a, B> +where + B: PartialEq + ToOwned, + C: ToOwned, +{ + #[inline] + fn eq(&self, other: &Cow<'b, C>) -> bool { + PartialEq::eq(&**self, &**other) + } +} + +#[stable(feature = "rust1", since = "1.0.0")] +impl<'a, B: ?Sized> PartialOrd for Cow<'a, B> +where + B: PartialOrd + ToOwned, +{ + #[inline] + fn partial_cmp(&self, other: &Cow<'a, B>) -> Option { + PartialOrd::partial_cmp(&**self, &**other) + } +} + +#[stable(feature = "rust1", since = "1.0.0")] +impl fmt::Debug for Cow<'_, B> +where + B: fmt::Debug + ToOwned, +{ + fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result { + match *self { + Borrowed(ref b) => fmt::Debug::fmt(b, f), + Owned(ref o) => fmt::Debug::fmt(o, f), + } + } +} + +#[stable(feature = "rust1", since = "1.0.0")] +impl fmt::Display for Cow<'_, B> +where + B: fmt::Display + ToOwned, +{ + fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result { + match *self { + Borrowed(ref b) => fmt::Display::fmt(b, f), + Owned(ref o) => fmt::Display::fmt(o, f), + } + } +} + +#[stable(feature = "default", since = "1.11.0")] +impl Default for Cow<'_, B> +where + B: ToOwned, +{ + /// Creates an owned Cow<'a, B> with the default value for the contained owned value. + fn default() -> Self { + Owned(::Owned::default()) + } +} + +#[stable(feature = "rust1", since = "1.0.0")] +impl Hash for Cow<'_, B> +where + B: Hash + ToOwned, +{ + #[inline] + fn hash(&self, state: &mut H) { + Hash::hash(&**self, state) + } +} + +#[stable(feature = "rust1", since = "1.0.0")] +impl AsRef for Cow<'_, T> { + fn as_ref(&self) -> &T { + self + } +} + +#[cfg(not(no_global_oom_handling))] +#[stable(feature = "cow_add", since = "1.14.0")] +impl<'a> Add<&'a str> for Cow<'a, str> { + type Output = Cow<'a, str>; + + #[inline] + fn add(mut self, rhs: &'a str) -> Self::Output { + self += rhs; + self + } +} + +#[cfg(not(no_global_oom_handling))] +#[stable(feature = "cow_add", since = "1.14.0")] +impl<'a> Add> for Cow<'a, str> { + type Output = Cow<'a, str>; + + #[inline] + fn add(mut self, rhs: Cow<'a, str>) -> Self::Output { + self += rhs; + self + } +} + +#[cfg(not(no_global_oom_handling))] +#[stable(feature = "cow_add", since = "1.14.0")] +impl<'a> AddAssign<&'a str> for Cow<'a, str> { + fn add_assign(&mut self, rhs: &'a str) { + if self.is_empty() { + *self = Cow::Borrowed(rhs) + } else if !rhs.is_empty() { + if let Cow::Borrowed(lhs) = *self { + let mut s = String::with_capacity(lhs.len() + rhs.len()); + s.push_str(lhs); + *self = Cow::Owned(s); + } + self.to_mut().push_str(rhs); + } + } +} + +#[cfg(not(no_global_oom_handling))] +#[stable(feature = "cow_add", since = "1.14.0")] +impl<'a> AddAssign> for Cow<'a, str> { + fn add_assign(&mut self, rhs: Cow<'a, str>) { + if self.is_empty() { + *self = rhs + } else if !rhs.is_empty() { + if let Cow::Borrowed(lhs) = *self { + let mut s = String::with_capacity(lhs.len() + rhs.len()); + s.push_str(lhs); + *self = Cow::Owned(s); + } + self.to_mut().push_str(&rhs); + } + } +} diff --git a/rust/alloc/boxed.rs b/rust/alloc/boxed.rs new file mode 100644 index 000000000..dcfe87b14 --- /dev/null +++ b/rust/alloc/boxed.rs @@ -0,0 +1,2028 @@ +// SPDX-License-Identifier: Apache-2.0 OR MIT + +//! A pointer type for heap allocation. +//! +//! [`Box`], casually referred to as a 'box', provides the simplest form of +//! heap allocation in Rust. Boxes provide ownership for this allocation, and +//! drop their contents when they go out of scope. Boxes also ensure that they +//! never allocate more than `isize::MAX` bytes. +//! +//! # Examples +//! +//! Move a value from the stack to the heap by creating a [`Box`]: +//! +//! ``` +//! let val: u8 = 5; +//! let boxed: Box = Box::new(val); +//! ``` +//! +//! Move a value from a [`Box`] back to the stack by [dereferencing]: +//! +//! ``` +//! let boxed: Box = Box::new(5); +//! let val: u8 = *boxed; +//! ``` +//! +//! Creating a recursive data structure: +//! +//! ``` +//! #[derive(Debug)] +//! enum List { +//! Cons(T, Box>), +//! Nil, +//! } +//! +//! let list: List = List::Cons(1, Box::new(List::Cons(2, Box::new(List::Nil)))); +//! println!("{list:?}"); +//! ``` +//! +//! This will print `Cons(1, Cons(2, Nil))`. +//! +//! Recursive structures must be boxed, because if the definition of `Cons` +//! looked like this: +//! +//! ```compile_fail,E0072 +//! # enum List { +//! Cons(T, List), +//! # } +//! ``` +//! +//! It wouldn't work. This is because the size of a `List` depends on how many +//! elements are in the list, and so we don't know how much memory to allocate +//! for a `Cons`. By introducing a [`Box`], which has a defined size, we know how +//! big `Cons` needs to be. +//! +//! # Memory layout +//! +//! For non-zero-sized values, a [`Box`] will use the [`Global`] allocator for +//! its allocation. It is valid to convert both ways between a [`Box`] and a +//! raw pointer allocated with the [`Global`] allocator, given that the +//! [`Layout`] used with the allocator is correct for the type. More precisely, +//! a `value: *mut T` that has been allocated with the [`Global`] allocator +//! with `Layout::for_value(&*value)` may be converted into a box using +//! [`Box::::from_raw(value)`]. Conversely, the memory backing a `value: *mut +//! T` obtained from [`Box::::into_raw`] may be deallocated using the +//! [`Global`] allocator with [`Layout::for_value(&*value)`]. +//! +//! For zero-sized values, the `Box` pointer still has to be [valid] for reads +//! and writes and sufficiently aligned. In particular, casting any aligned +//! non-zero integer literal to a raw pointer produces a valid pointer, but a +//! pointer pointing into previously allocated memory that since got freed is +//! not valid. The recommended way to build a Box to a ZST if `Box::new` cannot +//! be used is to use [`ptr::NonNull::dangling`]. +//! +//! So long as `T: Sized`, a `Box` is guaranteed to be represented +//! as a single pointer and is also ABI-compatible with C pointers +//! (i.e. the C type `T*`). This means that if you have extern "C" +//! Rust functions that will be called from C, you can define those +//! Rust functions using `Box` types, and use `T*` as corresponding +//! type on the C side. As an example, consider this C header which +//! declares functions that create and destroy some kind of `Foo` +//! value: +//! +//! ```c +//! /* C header */ +//! +//! /* Returns ownership to the caller */ +//! struct Foo* foo_new(void); +//! +//! /* Takes ownership from the caller; no-op when invoked with null */ +//! void foo_delete(struct Foo*); +//! ``` +//! +//! These two functions might be implemented in Rust as follows. Here, the +//! `struct Foo*` type from C is translated to `Box`, which captures +//! the ownership constraints. Note also that the nullable argument to +//! `foo_delete` is represented in Rust as `Option>`, since `Box` +//! cannot be null. +//! +//! ``` +//! #[repr(C)] +//! pub struct Foo; +//! +//! #[no_mangle] +//! pub extern "C" fn foo_new() -> Box { +//! Box::new(Foo) +//! } +//! +//! #[no_mangle] +//! pub extern "C" fn foo_delete(_: Option>) {} +//! ``` +//! +//! Even though `Box` has the same representation and C ABI as a C pointer, +//! this does not mean that you can convert an arbitrary `T*` into a `Box` +//! and expect things to work. `Box` values will always be fully aligned, +//! non-null pointers. Moreover, the destructor for `Box` will attempt to +//! free the value with the global allocator. In general, the best practice +//! is to only use `Box` for pointers that originated from the global +//! allocator. +//! +//! **Important.** At least at present, you should avoid using +//! `Box` types for functions that are defined in C but invoked +//! from Rust. In those cases, you should directly mirror the C types +//! as closely as possible. Using types like `Box` where the C +//! definition is just using `T*` can lead to undefined behavior, as +//! described in [rust-lang/unsafe-code-guidelines#198][ucg#198]. +//! +//! [ucg#198]: https://github.com/rust-lang/unsafe-code-guidelines/issues/198 +//! [dereferencing]: core::ops::Deref +//! [`Box::::from_raw(value)`]: Box::from_raw +//! [`Global`]: crate::alloc::Global +//! [`Layout`]: crate::alloc::Layout +//! [`Layout::for_value(&*value)`]: crate::alloc::Layout::for_value +//! [valid]: ptr#safety + +#![stable(feature = "rust1", since = "1.0.0")] + +use core::any::Any; +use core::async_iter::AsyncIterator; +use core::borrow; +use core::cmp::Ordering; +use core::convert::{From, TryFrom}; +use core::fmt; +use core::future::Future; +use core::hash::{Hash, Hasher}; +#[cfg(not(no_global_oom_handling))] +use core::iter::FromIterator; +use core::iter::{FusedIterator, Iterator}; +use core::marker::{Destruct, Unpin, Unsize}; +use core::mem; +use core::ops::{ + CoerceUnsized, Deref, DerefMut, DispatchFromDyn, Generator, GeneratorState, Receiver, +}; +use core::pin::Pin; +use core::ptr::{self, Unique}; +use core::task::{Context, Poll}; + +#[cfg(not(no_global_oom_handling))] +use crate::alloc::{handle_alloc_error, WriteCloneIntoRaw}; +use crate::alloc::{AllocError, Allocator, Global, Layout}; +#[cfg(not(no_global_oom_handling))] +use crate::borrow::Cow; +use crate::raw_vec::RawVec; +#[cfg(not(no_global_oom_handling))] +use crate::str::from_boxed_utf8_unchecked; +#[cfg(not(no_global_oom_handling))] +use crate::vec::Vec; + +#[cfg(not(no_thin))] +#[unstable(feature = "thin_box", issue = "92791")] +pub use thin::ThinBox; + +#[cfg(not(no_thin))] +mod thin; + +/// A pointer type for heap allocation. +/// +/// See the [module-level documentation](../../std/boxed/index.html) for more. +#[lang = "owned_box"] +#[fundamental] +#[stable(feature = "rust1", since = "1.0.0")] +// The declaration of the `Box` struct must be kept in sync with the +// `alloc::alloc::box_free` function or ICEs will happen. See the comment +// on `box_free` for more details. +pub struct Box< + T: ?Sized, + #[unstable(feature = "allocator_api", issue = "32838")] A: Allocator = Global, +>(Unique, A); + +impl Box { + /// Allocates memory on the heap and then places `x` into it. + /// + /// This doesn't actually allocate if `T` is zero-sized. + /// + /// # Examples + /// + /// ``` + /// let five = Box::new(5); + /// ``` + #[cfg(not(no_global_oom_handling))] + #[inline(always)] + #[stable(feature = "rust1", since = "1.0.0")] + #[must_use] + pub fn new(x: T) -> Self { + box x + } + + /// Constructs a new box with uninitialized contents. + /// + /// # Examples + /// + /// ``` + /// #![feature(new_uninit)] + /// + /// let mut five = Box::::new_uninit(); + /// + /// let five = unsafe { + /// // Deferred initialization: + /// five.as_mut_ptr().write(5); + /// + /// five.assume_init() + /// }; + /// + /// assert_eq!(*five, 5) + /// ``` + #[cfg(not(no_global_oom_handling))] + #[unstable(feature = "new_uninit", issue = "63291")] + #[must_use] + #[inline] + pub fn new_uninit() -> Box> { + Self::new_uninit_in(Global) + } + + /// Constructs a new `Box` with uninitialized contents, with the memory + /// being filled with `0` bytes. + /// + /// See [`MaybeUninit::zeroed`][zeroed] for examples of correct and incorrect usage + /// of this method. + /// + /// # Examples + /// + /// ``` + /// #![feature(new_uninit)] + /// + /// let zero = Box::::new_zeroed(); + /// let zero = unsafe { zero.assume_init() }; + /// + /// assert_eq!(*zero, 0) + /// ``` + /// + /// [zeroed]: mem::MaybeUninit::zeroed + #[cfg(not(no_global_oom_handling))] + #[inline] + #[unstable(feature = "new_uninit", issue = "63291")] + #[must_use] + pub fn new_zeroed() -> Box> { + Self::new_zeroed_in(Global) + } + + /// Constructs a new `Pin>`. If `T` does not implement `Unpin`, then + /// `x` will be pinned in memory and unable to be moved. + #[cfg(not(no_global_oom_handling))] + #[stable(feature = "pin", since = "1.33.0")] + #[must_use] + #[inline(always)] + pub fn pin(x: T) -> Pin> { + (box x).into() + } + + /// Allocates memory on the heap then places `x` into it, + /// returning an error if the allocation fails + /// + /// This doesn't actually allocate if `T` is zero-sized. + /// + /// # Examples + /// + /// ``` + /// #![feature(allocator_api)] + /// + /// let five = Box::try_new(5)?; + /// # Ok::<(), std::alloc::AllocError>(()) + /// ``` + #[unstable(feature = "allocator_api", issue = "32838")] + #[inline] + pub fn try_new(x: T) -> Result { + Self::try_new_in(x, Global) + } + + /// Constructs a new box with uninitialized contents on the heap, + /// returning an error if the allocation fails + /// + /// # Examples + /// + /// ``` + /// #![feature(allocator_api, new_uninit)] + /// + /// let mut five = Box::::try_new_uninit()?; + /// + /// let five = unsafe { + /// // Deferred initialization: + /// five.as_mut_ptr().write(5); + /// + /// five.assume_init() + /// }; + /// + /// assert_eq!(*five, 5); + /// # Ok::<(), std::alloc::AllocError>(()) + /// ``` + #[unstable(feature = "allocator_api", issue = "32838")] + // #[unstable(feature = "new_uninit", issue = "63291")] + #[inline] + pub fn try_new_uninit() -> Result>, AllocError> { + Box::try_new_uninit_in(Global) + } + + /// Constructs a new `Box` with uninitialized contents, with the memory + /// being filled with `0` bytes on the heap + /// + /// See [`MaybeUninit::zeroed`][zeroed] for examples of correct and incorrect usage + /// of this method. + /// + /// # Examples + /// + /// ``` + /// #![feature(allocator_api, new_uninit)] + /// + /// let zero = Box::::try_new_zeroed()?; + /// let zero = unsafe { zero.assume_init() }; + /// + /// assert_eq!(*zero, 0); + /// # Ok::<(), std::alloc::AllocError>(()) + /// ``` + /// + /// [zeroed]: mem::MaybeUninit::zeroed + #[unstable(feature = "allocator_api", issue = "32838")] + // #[unstable(feature = "new_uninit", issue = "63291")] + #[inline] + pub fn try_new_zeroed() -> Result>, AllocError> { + Box::try_new_zeroed_in(Global) + } +} + +impl Box { + /// Allocates memory in the given allocator then places `x` into it. + /// + /// This doesn't actually allocate if `T` is zero-sized. + /// + /// # Examples + /// + /// ``` + /// #![feature(allocator_api)] + /// + /// use std::alloc::System; + /// + /// let five = Box::new_in(5, System); + /// ``` + #[cfg(not(no_global_oom_handling))] + #[unstable(feature = "allocator_api", issue = "32838")] + #[rustc_const_unstable(feature = "const_box", issue = "92521")] + #[must_use] + #[inline] + pub const fn new_in(x: T, alloc: A) -> Self + where + A: ~const Allocator + ~const Destruct, + { + let mut boxed = Self::new_uninit_in(alloc); + unsafe { + boxed.as_mut_ptr().write(x); + boxed.assume_init() + } + } + + /// Allocates memory in the given allocator then places `x` into it, + /// returning an error if the allocation fails + /// + /// This doesn't actually allocate if `T` is zero-sized. + /// + /// # Examples + /// + /// ``` + /// #![feature(allocator_api)] + /// + /// use std::alloc::System; + /// + /// let five = Box::try_new_in(5, System)?; + /// # Ok::<(), std::alloc::AllocError>(()) + /// ``` + #[unstable(feature = "allocator_api", issue = "32838")] + #[rustc_const_unstable(feature = "const_box", issue = "92521")] + #[inline] + pub const fn try_new_in(x: T, alloc: A) -> Result + where + T: ~const Destruct, + A: ~const Allocator + ~const Destruct, + { + let mut boxed = Self::try_new_uninit_in(alloc)?; + unsafe { + boxed.as_mut_ptr().write(x); + Ok(boxed.assume_init()) + } + } + + /// Constructs a new box with uninitialized contents in the provided allocator. + /// + /// # Examples + /// + /// ``` + /// #![feature(allocator_api, new_uninit)] + /// + /// use std::alloc::System; + /// + /// let mut five = Box::::new_uninit_in(System); + /// + /// let five = unsafe { + /// // Deferred initialization: + /// five.as_mut_ptr().write(5); + /// + /// five.assume_init() + /// }; + /// + /// assert_eq!(*five, 5) + /// ``` + #[unstable(feature = "allocator_api", issue = "32838")] + #[rustc_const_unstable(feature = "const_box", issue = "92521")] + #[cfg(not(no_global_oom_handling))] + #[must_use] + // #[unstable(feature = "new_uninit", issue = "63291")] + pub const fn new_uninit_in(alloc: A) -> Box, A> + where + A: ~const Allocator + ~const Destruct, + { + let layout = Layout::new::>(); + // NOTE: Prefer match over unwrap_or_else since closure sometimes not inlineable. + // That would make code size bigger. + match Box::try_new_uninit_in(alloc) { + Ok(m) => m, + Err(_) => handle_alloc_error(layout), + } + } + + /// Constructs a new box with uninitialized contents in the provided allocator, + /// returning an error if the allocation fails + /// + /// # Examples + /// + /// ``` + /// #![feature(allocator_api, new_uninit)] + /// + /// use std::alloc::System; + /// + /// let mut five = Box::::try_new_uninit_in(System)?; + /// + /// let five = unsafe { + /// // Deferred initialization: + /// five.as_mut_ptr().write(5); + /// + /// five.assume_init() + /// }; + /// + /// assert_eq!(*five, 5); + /// # Ok::<(), std::alloc::AllocError>(()) + /// ``` + #[unstable(feature = "allocator_api", issue = "32838")] + // #[unstable(feature = "new_uninit", issue = "63291")] + #[rustc_const_unstable(feature = "const_box", issue = "92521")] + pub const fn try_new_uninit_in(alloc: A) -> Result, A>, AllocError> + where + A: ~const Allocator + ~const Destruct, + { + let layout = Layout::new::>(); + let ptr = alloc.allocate(layout)?.cast(); + unsafe { Ok(Box::from_raw_in(ptr.as_ptr(), alloc)) } + } + + /// Constructs a new `Box` with uninitialized contents, with the memory + /// being filled with `0` bytes in the provided allocator. + /// + /// See [`MaybeUninit::zeroed`][zeroed] for examples of correct and incorrect usage + /// of this method. + /// + /// # Examples + /// + /// ``` + /// #![feature(allocator_api, new_uninit)] + /// + /// use std::alloc::System; + /// + /// let zero = Box::::new_zeroed_in(System); + /// let zero = unsafe { zero.assume_init() }; + /// + /// assert_eq!(*zero, 0) + /// ``` + /// + /// [zeroed]: mem::MaybeUninit::zeroed + #[unstable(feature = "allocator_api", issue = "32838")] + #[rustc_const_unstable(feature = "const_box", issue = "92521")] + #[cfg(not(no_global_oom_handling))] + // #[unstable(feature = "new_uninit", issue = "63291")] + #[must_use] + pub const fn new_zeroed_in(alloc: A) -> Box, A> + where + A: ~const Allocator + ~const Destruct, + { + let layout = Layout::new::>(); + // NOTE: Prefer match over unwrap_or_else since closure sometimes not inlineable. + // That would make code size bigger. + match Box::try_new_zeroed_in(alloc) { + Ok(m) => m, + Err(_) => handle_alloc_error(layout), + } + } + + /// Constructs a new `Box` with uninitialized contents, with the memory + /// being filled with `0` bytes in the provided allocator, + /// returning an error if the allocation fails, + /// + /// See [`MaybeUninit::zeroed`][zeroed] for examples of correct and incorrect usage + /// of this method. + /// + /// # Examples + /// + /// ``` + /// #![feature(allocator_api, new_uninit)] + /// + /// use std::alloc::System; + /// + /// let zero = Box::::try_new_zeroed_in(System)?; + /// let zero = unsafe { zero.assume_init() }; + /// + /// assert_eq!(*zero, 0); + /// # Ok::<(), std::alloc::AllocError>(()) + /// ``` + /// + /// [zeroed]: mem::MaybeUninit::zeroed + #[unstable(feature = "allocator_api", issue = "32838")] + // #[unstable(feature = "new_uninit", issue = "63291")] + #[rustc_const_unstable(feature = "const_box", issue = "92521")] + pub const fn try_new_zeroed_in(alloc: A) -> Result, A>, AllocError> + where + A: ~const Allocator + ~const Destruct, + { + let layout = Layout::new::>(); + let ptr = alloc.allocate_zeroed(layout)?.cast(); + unsafe { Ok(Box::from_raw_in(ptr.as_ptr(), alloc)) } + } + + /// Constructs a new `Pin>`. If `T` does not implement `Unpin`, then + /// `x` will be pinned in memory and unable to be moved. + #[cfg(not(no_global_oom_handling))] + #[unstable(feature = "allocator_api", issue = "32838")] + #[rustc_const_unstable(feature = "const_box", issue = "92521")] + #[must_use] + #[inline(always)] + pub const fn pin_in(x: T, alloc: A) -> Pin + where + A: 'static + ~const Allocator + ~const Destruct, + { + Self::into_pin(Self::new_in(x, alloc)) + } + + /// Converts a `Box` into a `Box<[T]>` + /// + /// This conversion does not allocate on the heap and happens in place. + #[unstable(feature = "box_into_boxed_slice", issue = "71582")] + #[rustc_const_unstable(feature = "const_box", issue = "92521")] + pub const fn into_boxed_slice(boxed: Self) -> Box<[T], A> { + let (raw, alloc) = Box::into_raw_with_allocator(boxed); + unsafe { Box::from_raw_in(raw as *mut [T; 1], alloc) } + } + + /// Consumes the `Box`, returning the wrapped value. + /// + /// # Examples + /// + /// ``` + /// #![feature(box_into_inner)] + /// + /// let c = Box::new(5); + /// + /// assert_eq!(Box::into_inner(c), 5); + /// ``` + #[unstable(feature = "box_into_inner", issue = "80437")] + #[rustc_const_unstable(feature = "const_box", issue = "92521")] + #[inline] + pub const fn into_inner(boxed: Self) -> T + where + Self: ~const Destruct, + { + *boxed + } +} + +impl Box<[T]> { + /// Constructs a new boxed slice with uninitialized contents. + /// + /// # Examples + /// + /// ``` + /// #![feature(new_uninit)] + /// + /// let mut values = Box::<[u32]>::new_uninit_slice(3); + /// + /// let values = unsafe { + /// // Deferred initialization: + /// values[0].as_mut_ptr().write(1); + /// values[1].as_mut_ptr().write(2); + /// values[2].as_mut_ptr().write(3); + /// + /// values.assume_init() + /// }; + /// + /// assert_eq!(*values, [1, 2, 3]) + /// ``` + #[cfg(not(no_global_oom_handling))] + #[unstable(feature = "new_uninit", issue = "63291")] + #[must_use] + pub fn new_uninit_slice(len: usize) -> Box<[mem::MaybeUninit]> { + unsafe { RawVec::with_capacity(len).into_box(len) } + } + + /// Constructs a new boxed slice with uninitialized contents, with the memory + /// being filled with `0` bytes. + /// + /// See [`MaybeUninit::zeroed`][zeroed] for examples of correct and incorrect usage + /// of this method. + /// + /// # Examples + /// + /// ``` + /// #![feature(new_uninit)] + /// + /// let values = Box::<[u32]>::new_zeroed_slice(3); + /// let values = unsafe { values.assume_init() }; + /// + /// assert_eq!(*values, [0, 0, 0]) + /// ``` + /// + /// [zeroed]: mem::MaybeUninit::zeroed + #[cfg(not(no_global_oom_handling))] + #[unstable(feature = "new_uninit", issue = "63291")] + #[must_use] + pub fn new_zeroed_slice(len: usize) -> Box<[mem::MaybeUninit]> { + unsafe { RawVec::with_capacity_zeroed(len).into_box(len) } + } + + /// Constructs a new boxed slice with uninitialized contents. Returns an error if + /// the allocation fails + /// + /// # Examples + /// + /// ``` + /// #![feature(allocator_api, new_uninit)] + /// + /// let mut values = Box::<[u32]>::try_new_uninit_slice(3)?; + /// let values = unsafe { + /// // Deferred initialization: + /// values[0].as_mut_ptr().write(1); + /// values[1].as_mut_ptr().write(2); + /// values[2].as_mut_ptr().write(3); + /// values.assume_init() + /// }; + /// + /// assert_eq!(*values, [1, 2, 3]); + /// # Ok::<(), std::alloc::AllocError>(()) + /// ``` + #[unstable(feature = "allocator_api", issue = "32838")] + #[inline] + pub fn try_new_uninit_slice(len: usize) -> Result]>, AllocError> { + unsafe { + let layout = match Layout::array::>(len) { + Ok(l) => l, + Err(_) => return Err(AllocError), + }; + let ptr = Global.allocate(layout)?; + Ok(RawVec::from_raw_parts_in(ptr.as_mut_ptr() as *mut _, len, Global).into_box(len)) + } + } + + /// Constructs a new boxed slice with uninitialized contents, with the memory + /// being filled with `0` bytes. Returns an error if the allocation fails + /// + /// See [`MaybeUninit::zeroed`][zeroed] for examples of correct and incorrect usage + /// of this method. + /// + /// # Examples + /// + /// ``` + /// #![feature(allocator_api, new_uninit)] + /// + /// let values = Box::<[u32]>::try_new_zeroed_slice(3)?; + /// let values = unsafe { values.assume_init() }; + /// + /// assert_eq!(*values, [0, 0, 0]); + /// # Ok::<(), std::alloc::AllocError>(()) + /// ``` + /// + /// [zeroed]: mem::MaybeUninit::zeroed + #[unstable(feature = "allocator_api", issue = "32838")] + #[inline] + pub fn try_new_zeroed_slice(len: usize) -> Result]>, AllocError> { + unsafe { + let layout = match Layout::array::>(len) { + Ok(l) => l, + Err(_) => return Err(AllocError), + }; + let ptr = Global.allocate_zeroed(layout)?; + Ok(RawVec::from_raw_parts_in(ptr.as_mut_ptr() as *mut _, len, Global).into_box(len)) + } + } +} + +impl Box<[T], A> { + /// Constructs a new boxed slice with uninitialized contents in the provided allocator. + /// + /// # Examples + /// + /// ``` + /// #![feature(allocator_api, new_uninit)] + /// + /// use std::alloc::System; + /// + /// let mut values = Box::<[u32], _>::new_uninit_slice_in(3, System); + /// + /// let values = unsafe { + /// // Deferred initialization: + /// values[0].as_mut_ptr().write(1); + /// values[1].as_mut_ptr().write(2); + /// values[2].as_mut_ptr().write(3); + /// + /// values.assume_init() + /// }; + /// + /// assert_eq!(*values, [1, 2, 3]) + /// ``` + #[cfg(not(no_global_oom_handling))] + #[unstable(feature = "allocator_api", issue = "32838")] + // #[unstable(feature = "new_uninit", issue = "63291")] + #[must_use] + pub fn new_uninit_slice_in(len: usize, alloc: A) -> Box<[mem::MaybeUninit], A> { + unsafe { RawVec::with_capacity_in(len, alloc).into_box(len) } + } + + /// Constructs a new boxed slice with uninitialized contents in the provided allocator, + /// with the memory being filled with `0` bytes. + /// + /// See [`MaybeUninit::zeroed`][zeroed] for examples of correct and incorrect usage + /// of this method. + /// + /// # Examples + /// + /// ``` + /// #![feature(allocator_api, new_uninit)] + /// + /// use std::alloc::System; + /// + /// let values = Box::<[u32], _>::new_zeroed_slice_in(3, System); + /// let values = unsafe { values.assume_init() }; + /// + /// assert_eq!(*values, [0, 0, 0]) + /// ``` + /// + /// [zeroed]: mem::MaybeUninit::zeroed + #[cfg(not(no_global_oom_handling))] + #[unstable(feature = "allocator_api", issue = "32838")] + // #[unstable(feature = "new_uninit", issue = "63291")] + #[must_use] + pub fn new_zeroed_slice_in(len: usize, alloc: A) -> Box<[mem::MaybeUninit], A> { + unsafe { RawVec::with_capacity_zeroed_in(len, alloc).into_box(len) } + } +} + +impl Box, A> { + /// Converts to `Box`. + /// + /// # Safety + /// + /// As with [`MaybeUninit::assume_init`], + /// it is up to the caller to guarantee that the value + /// really is in an initialized state. + /// Calling this when the content is not yet fully initialized + /// causes immediate undefined behavior. + /// + /// [`MaybeUninit::assume_init`]: mem::MaybeUninit::assume_init + /// + /// # Examples + /// + /// ``` + /// #![feature(new_uninit)] + /// + /// let mut five = Box::::new_uninit(); + /// + /// let five: Box = unsafe { + /// // Deferred initialization: + /// five.as_mut_ptr().write(5); + /// + /// five.assume_init() + /// }; + /// + /// assert_eq!(*five, 5) + /// ``` + #[unstable(feature = "new_uninit", issue = "63291")] + #[rustc_const_unstable(feature = "const_box", issue = "92521")] + #[inline] + pub const unsafe fn assume_init(self) -> Box { + let (raw, alloc) = Box::into_raw_with_allocator(self); + unsafe { Box::from_raw_in(raw as *mut T, alloc) } + } + + /// Writes the value and converts to `Box`. + /// + /// This method converts the box similarly to [`Box::assume_init`] but + /// writes `value` into it before conversion thus guaranteeing safety. + /// In some scenarios use of this method may improve performance because + /// the compiler may be able to optimize copying from stack. + /// + /// # Examples + /// + /// ``` + /// #![feature(new_uninit)] + /// + /// let big_box = Box::<[usize; 1024]>::new_uninit(); + /// + /// let mut array = [0; 1024]; + /// for (i, place) in array.iter_mut().enumerate() { + /// *place = i; + /// } + /// + /// // The optimizer may be able to elide this copy, so previous code writes + /// // to heap directly. + /// let big_box = Box::write(big_box, array); + /// + /// for (i, x) in big_box.iter().enumerate() { + /// assert_eq!(*x, i); + /// } + /// ``` + #[unstable(feature = "new_uninit", issue = "63291")] + #[rustc_const_unstable(feature = "const_box", issue = "92521")] + #[inline] + pub const fn write(mut boxed: Self, value: T) -> Box { + unsafe { + (*boxed).write(value); + boxed.assume_init() + } + } +} + +impl Box<[mem::MaybeUninit], A> { + /// Converts to `Box<[T], A>`. + /// + /// # Safety + /// + /// As with [`MaybeUninit::assume_init`], + /// it is up to the caller to guarantee that the values + /// really are in an initialized state. + /// Calling this when the content is not yet fully initialized + /// causes immediate undefined behavior. + /// + /// [`MaybeUninit::assume_init`]: mem::MaybeUninit::assume_init + /// + /// # Examples + /// + /// ``` + /// #![feature(new_uninit)] + /// + /// let mut values = Box::<[u32]>::new_uninit_slice(3); + /// + /// let values = unsafe { + /// // Deferred initialization: + /// values[0].as_mut_ptr().write(1); + /// values[1].as_mut_ptr().write(2); + /// values[2].as_mut_ptr().write(3); + /// + /// values.assume_init() + /// }; + /// + /// assert_eq!(*values, [1, 2, 3]) + /// ``` + #[unstable(feature = "new_uninit", issue = "63291")] + #[inline] + pub unsafe fn assume_init(self) -> Box<[T], A> { + let (raw, alloc) = Box::into_raw_with_allocator(self); + unsafe { Box::from_raw_in(raw as *mut [T], alloc) } + } +} + +impl Box { + /// Constructs a box from a raw pointer. + /// + /// After calling this function, the raw pointer is owned by the + /// resulting `Box`. Specifically, the `Box` destructor will call + /// the destructor of `T` and free the allocated memory. For this + /// to be safe, the memory must have been allocated in accordance + /// with the [memory layout] used by `Box` . + /// + /// # Safety + /// + /// This function is unsafe because improper use may lead to + /// memory problems. For example, a double-free may occur if the + /// function is called twice on the same raw pointer. + /// + /// The safety conditions are described in the [memory layout] section. + /// + /// # Examples + /// + /// Recreate a `Box` which was previously converted to a raw pointer + /// using [`Box::into_raw`]: + /// ``` + /// let x = Box::new(5); + /// let ptr = Box::into_raw(x); + /// let x = unsafe { Box::from_raw(ptr) }; + /// ``` + /// Manually create a `Box` from scratch by using the global allocator: + /// ``` + /// use std::alloc::{alloc, Layout}; + /// + /// unsafe { + /// let ptr = alloc(Layout::new::()) as *mut i32; + /// // In general .write is required to avoid attempting to destruct + /// // the (uninitialized) previous contents of `ptr`, though for this + /// // simple example `*ptr = 5` would have worked as well. + /// ptr.write(5); + /// let x = Box::from_raw(ptr); + /// } + /// ``` + /// + /// [memory layout]: self#memory-layout + /// [`Layout`]: crate::Layout + #[stable(feature = "box_raw", since = "1.4.0")] + #[inline] + pub unsafe fn from_raw(raw: *mut T) -> Self { + unsafe { Self::from_raw_in(raw, Global) } + } +} + +impl Box { + /// Constructs a box from a raw pointer in the given allocator. + /// + /// After calling this function, the raw pointer is owned by the + /// resulting `Box`. Specifically, the `Box` destructor will call + /// the destructor of `T` and free the allocated memory. For this + /// to be safe, the memory must have been allocated in accordance + /// with the [memory layout] used by `Box` . + /// + /// # Safety + /// + /// This function is unsafe because improper use may lead to + /// memory problems. For example, a double-free may occur if the + /// function is called twice on the same raw pointer. + /// + /// + /// # Examples + /// + /// Recreate a `Box` which was previously converted to a raw pointer + /// using [`Box::into_raw_with_allocator`]: + /// ``` + /// #![feature(allocator_api)] + /// + /// use std::alloc::System; + /// + /// let x = Box::new_in(5, System); + /// let (ptr, alloc) = Box::into_raw_with_allocator(x); + /// let x = unsafe { Box::from_raw_in(ptr, alloc) }; + /// ``` + /// Manually create a `Box` from scratch by using the system allocator: + /// ``` + /// #![feature(allocator_api, slice_ptr_get)] + /// + /// use std::alloc::{Allocator, Layout, System}; + /// + /// unsafe { + /// let ptr = System.allocate(Layout::new::())?.as_mut_ptr() as *mut i32; + /// // In general .write is required to avoid attempting to destruct + /// // the (uninitialized) previous contents of `ptr`, though for this + /// // simple example `*ptr = 5` would have worked as well. + /// ptr.write(5); + /// let x = Box::from_raw_in(ptr, System); + /// } + /// # Ok::<(), std::alloc::AllocError>(()) + /// ``` + /// + /// [memory layout]: self#memory-layout + /// [`Layout`]: crate::Layout + #[unstable(feature = "allocator_api", issue = "32838")] + #[rustc_const_unstable(feature = "const_box", issue = "92521")] + #[inline] + pub const unsafe fn from_raw_in(raw: *mut T, alloc: A) -> Self { + Box(unsafe { Unique::new_unchecked(raw) }, alloc) + } + + /// Consumes the `Box`, returning a wrapped raw pointer. + /// + /// The pointer will be properly aligned and non-null. + /// + /// After calling this function, the caller is responsible for the + /// memory previously managed by the `Box`. In particular, the + /// caller should properly destroy `T` and release the memory, taking + /// into account the [memory layout] used by `Box`. The easiest way to + /// do this is to convert the raw pointer back into a `Box` with the + /// [`Box::from_raw`] function, allowing the `Box` destructor to perform + /// the cleanup. + /// + /// Note: this is an associated function, which means that you have + /// to call it as `Box::into_raw(b)` instead of `b.into_raw()`. This + /// is so that there is no conflict with a method on the inner type. + /// + /// # Examples + /// Converting the raw pointer back into a `Box` with [`Box::from_raw`] + /// for automatic cleanup: + /// ``` + /// let x = Box::new(String::from("Hello")); + /// let ptr = Box::into_raw(x); + /// let x = unsafe { Box::from_raw(ptr) }; + /// ``` + /// Manual cleanup by explicitly running the destructor and deallocating + /// the memory: + /// ``` + /// use std::alloc::{dealloc, Layout}; + /// use std::ptr; + /// + /// let x = Box::new(String::from("Hello")); + /// let p = Box::into_raw(x); + /// unsafe { + /// ptr::drop_in_place(p); + /// dealloc(p as *mut u8, Layout::new::()); + /// } + /// ``` + /// + /// [memory layout]: self#memory-layout + #[stable(feature = "box_raw", since = "1.4.0")] + #[inline] + pub fn into_raw(b: Self) -> *mut T { + Self::into_raw_with_allocator(b).0 + } + + /// Consumes the `Box`, returning a wrapped raw pointer and the allocator. + /// + /// The pointer will be properly aligned and non-null. + /// + /// After calling this function, the caller is responsible for the + /// memory previously managed by the `Box`. In particular, the + /// caller should properly destroy `T` and release the memory, taking + /// into account the [memory layout] used by `Box`. The easiest way to + /// do this is to convert the raw pointer back into a `Box` with the + /// [`Box::from_raw_in`] function, allowing the `Box` destructor to perform + /// the cleanup. + /// + /// Note: this is an associated function, which means that you have + /// to call it as `Box::into_raw_with_allocator(b)` instead of `b.into_raw_with_allocator()`. This + /// is so that there is no conflict with a method on the inner type. + /// + /// # Examples + /// Converting the raw pointer back into a `Box` with [`Box::from_raw_in`] + /// for automatic cleanup: + /// ``` + /// #![feature(allocator_api)] + /// + /// use std::alloc::System; + /// + /// let x = Box::new_in(String::from("Hello"), System); + /// let (ptr, alloc) = Box::into_raw_with_allocator(x); + /// let x = unsafe { Box::from_raw_in(ptr, alloc) }; + /// ``` + /// Manual cleanup by explicitly running the destructor and deallocating + /// the memory: + /// ``` + /// #![feature(allocator_api)] + /// + /// use std::alloc::{Allocator, Layout, System}; + /// use std::ptr::{self, NonNull}; + /// + /// let x = Box::new_in(String::from("Hello"), System); + /// let (ptr, alloc) = Box::into_raw_with_allocator(x); + /// unsafe { + /// ptr::drop_in_place(ptr); + /// let non_null = NonNull::new_unchecked(ptr); + /// alloc.deallocate(non_null.cast(), Layout::new::()); + /// } + /// ``` + /// + /// [memory layout]: self#memory-layout + #[unstable(feature = "allocator_api", issue = "32838")] + #[rustc_const_unstable(feature = "const_box", issue = "92521")] + #[inline] + pub const fn into_raw_with_allocator(b: Self) -> (*mut T, A) { + let (leaked, alloc) = Box::into_unique(b); + (leaked.as_ptr(), alloc) + } + + #[unstable( + feature = "ptr_internals", + issue = "none", + reason = "use `Box::leak(b).into()` or `Unique::from(Box::leak(b))` instead" + )] + #[rustc_const_unstable(feature = "const_box", issue = "92521")] + #[inline] + #[doc(hidden)] + pub const fn into_unique(b: Self) -> (Unique, A) { + // Box is recognized as a "unique pointer" by Stacked Borrows, but internally it is a + // raw pointer for the type system. Turning it directly into a raw pointer would not be + // recognized as "releasing" the unique pointer to permit aliased raw accesses, + // so all raw pointer methods have to go through `Box::leak`. Turning *that* to a raw pointer + // behaves correctly. + let alloc = unsafe { ptr::read(&b.1) }; + (Unique::from(Box::leak(b)), alloc) + } + + /// Returns a reference to the underlying allocator. + /// + /// Note: this is an associated function, which means that you have + /// to call it as `Box::allocator(&b)` instead of `b.allocator()`. This + /// is so that there is no conflict with a method on the inner type. + #[unstable(feature = "allocator_api", issue = "32838")] + #[rustc_const_unstable(feature = "const_box", issue = "92521")] + #[inline] + pub const fn allocator(b: &Self) -> &A { + &b.1 + } + + /// Consumes and leaks the `Box`, returning a mutable reference, + /// `&'a mut T`. Note that the type `T` must outlive the chosen lifetime + /// `'a`. If the type has only static references, or none at all, then this + /// may be chosen to be `'static`. + /// + /// This function is mainly useful for data that lives for the remainder of + /// the program's life. Dropping the returned reference will cause a memory + /// leak. If this is not acceptable, the reference should first be wrapped + /// with the [`Box::from_raw`] function producing a `Box`. This `Box` can + /// then be dropped which will properly destroy `T` and release the + /// allocated memory. + /// + /// Note: this is an associated function, which means that you have + /// to call it as `Box::leak(b)` instead of `b.leak()`. This + /// is so that there is no conflict with a method on the inner type. + /// + /// # Examples + /// + /// Simple usage: + /// + /// ``` + /// let x = Box::new(41); + /// let static_ref: &'static mut usize = Box::leak(x); + /// *static_ref += 1; + /// assert_eq!(*static_ref, 42); + /// ``` + /// + /// Unsized data: + /// + /// ``` + /// let x = vec![1, 2, 3].into_boxed_slice(); + /// let static_ref = Box::leak(x); + /// static_ref[0] = 4; + /// assert_eq!(*static_ref, [4, 2, 3]); + /// ``` + #[stable(feature = "box_leak", since = "1.26.0")] + #[rustc_const_unstable(feature = "const_box", issue = "92521")] + #[inline] + pub const fn leak<'a>(b: Self) -> &'a mut T + where + A: 'a, + { + unsafe { &mut *mem::ManuallyDrop::new(b).0.as_ptr() } + } + + /// Converts a `Box` into a `Pin>` + /// + /// This conversion does not allocate on the heap and happens in place. + /// + /// This is also available via [`From`]. + #[unstable(feature = "box_into_pin", issue = "62370")] + #[rustc_const_unstable(feature = "const_box", issue = "92521")] + pub const fn into_pin(boxed: Self) -> Pin + where + A: 'static, + { + // It's not possible to move or replace the insides of a `Pin>` + // when `T: !Unpin`, so it's safe to pin it directly without any + // additional requirements. + unsafe { Pin::new_unchecked(boxed) } + } +} + +#[stable(feature = "rust1", since = "1.0.0")] +unsafe impl<#[may_dangle] T: ?Sized, A: Allocator> Drop for Box { + fn drop(&mut self) { + // FIXME: Do nothing, drop is currently performed by compiler. + } +} + +#[cfg(not(no_global_oom_handling))] +#[stable(feature = "rust1", since = "1.0.0")] +impl Default for Box { + /// Creates a `Box`, with the `Default` value for T. + fn default() -> Self { + box T::default() + } +} + +#[cfg(not(no_global_oom_handling))] +#[stable(feature = "rust1", since = "1.0.0")] +#[rustc_const_unstable(feature = "const_default_impls", issue = "87864")] +impl const Default for Box<[T]> { + fn default() -> Self { + let ptr: Unique<[T]> = Unique::<[T; 0]>::dangling(); + Box(ptr, Global) + } +} + +#[cfg(not(no_global_oom_handling))] +#[stable(feature = "default_box_extra", since = "1.17.0")] +#[rustc_const_unstable(feature = "const_default_impls", issue = "87864")] +impl const Default for Box { + fn default() -> Self { + // SAFETY: This is the same as `Unique::cast` but with an unsized `U = str`. + let ptr: Unique = unsafe { + let bytes: Unique<[u8]> = Unique::<[u8; 0]>::dangling(); + Unique::new_unchecked(bytes.as_ptr() as *mut str) + }; + Box(ptr, Global) + } +} + +#[cfg(not(no_global_oom_handling))] +#[stable(feature = "rust1", since = "1.0.0")] +impl Clone for Box { + /// Returns a new box with a `clone()` of this box's contents. + /// + /// # Examples + /// + /// ``` + /// let x = Box::new(5); + /// let y = x.clone(); + /// + /// // The value is the same + /// assert_eq!(x, y); + /// + /// // But they are unique objects + /// assert_ne!(&*x as *const i32, &*y as *const i32); + /// ``` + #[inline] + fn clone(&self) -> Self { + // Pre-allocate memory to allow writing the cloned value directly. + let mut boxed = Self::new_uninit_in(self.1.clone()); + unsafe { + (**self).write_clone_into_raw(boxed.as_mut_ptr()); + boxed.assume_init() + } + } + + /// Copies `source`'s contents into `self` without creating a new allocation. + /// + /// # Examples + /// + /// ``` + /// let x = Box::new(5); + /// let mut y = Box::new(10); + /// let yp: *const i32 = &*y; + /// + /// y.clone_from(&x); + /// + /// // The value is the same + /// assert_eq!(x, y); + /// + /// // And no allocation occurred + /// assert_eq!(yp, &*y); + /// ``` + #[inline] + fn clone_from(&mut self, source: &Self) { + (**self).clone_from(&(**source)); + } +} + +#[cfg(not(no_global_oom_handling))] +#[stable(feature = "box_slice_clone", since = "1.3.0")] +impl Clone for Box { + fn clone(&self) -> Self { + // this makes a copy of the data + let buf: Box<[u8]> = self.as_bytes().into(); + unsafe { from_boxed_utf8_unchecked(buf) } + } +} + +#[stable(feature = "rust1", since = "1.0.0")] +impl PartialEq for Box { + #[inline] + fn eq(&self, other: &Self) -> bool { + PartialEq::eq(&**self, &**other) + } + #[inline] + fn ne(&self, other: &Self) -> bool { + PartialEq::ne(&**self, &**other) + } +} +#[stable(feature = "rust1", since = "1.0.0")] +impl PartialOrd for Box { + #[inline] + fn partial_cmp(&self, other: &Self) -> Option { + PartialOrd::partial_cmp(&**self, &**other) + } + #[inline] + fn lt(&self, other: &Self) -> bool { + PartialOrd::lt(&**self, &**other) + } + #[inline] + fn le(&self, other: &Self) -> bool { + PartialOrd::le(&**self, &**other) + } + #[inline] + fn ge(&self, other: &Self) -> bool { + PartialOrd::ge(&**self, &**other) + } + #[inline] + fn gt(&self, other: &Self) -> bool { + PartialOrd::gt(&**self, &**other) + } +} +#[stable(feature = "rust1", since = "1.0.0")] +impl Ord for Box { + #[inline] + fn cmp(&self, other: &Self) -> Ordering { + Ord::cmp(&**self, &**other) + } +} +#[stable(feature = "rust1", since = "1.0.0")] +impl Eq for Box {} + +#[stable(feature = "rust1", since = "1.0.0")] +impl Hash for Box { + fn hash(&self, state: &mut H) { + (**self).hash(state); + } +} + +#[stable(feature = "indirect_hasher_impl", since = "1.22.0")] +impl Hasher for Box { + fn finish(&self) -> u64 { + (**self).finish() + } + fn write(&mut self, bytes: &[u8]) { + (**self).write(bytes) + } + fn write_u8(&mut self, i: u8) { + (**self).write_u8(i) + } + fn write_u16(&mut self, i: u16) { + (**self).write_u16(i) + } + fn write_u32(&mut self, i: u32) { + (**self).write_u32(i) + } + fn write_u64(&mut self, i: u64) { + (**self).write_u64(i) + } + fn write_u128(&mut self, i: u128) { + (**self).write_u128(i) + } + fn write_usize(&mut self, i: usize) { + (**self).write_usize(i) + } + fn write_i8(&mut self, i: i8) { + (**self).write_i8(i) + } + fn write_i16(&mut self, i: i16) { + (**self).write_i16(i) + } + fn write_i32(&mut self, i: i32) { + (**self).write_i32(i) + } + fn write_i64(&mut self, i: i64) { + (**self).write_i64(i) + } + fn write_i128(&mut self, i: i128) { + (**self).write_i128(i) + } + fn write_isize(&mut self, i: isize) { + (**self).write_isize(i) + } + fn write_length_prefix(&mut self, len: usize) { + (**self).write_length_prefix(len) + } + fn write_str(&mut self, s: &str) { + (**self).write_str(s) + } +} + +#[cfg(not(no_global_oom_handling))] +#[stable(feature = "from_for_ptrs", since = "1.6.0")] +impl From for Box { + /// Converts a `T` into a `Box` + /// + /// The conversion allocates on the heap and moves `t` + /// from the stack into it. + /// + /// # Examples + /// + /// ```rust + /// let x = 5; + /// let boxed = Box::new(5); + /// + /// assert_eq!(Box::from(x), boxed); + /// ``` + fn from(t: T) -> Self { + Box::new(t) + } +} + +#[stable(feature = "pin", since = "1.33.0")] +#[rustc_const_unstable(feature = "const_box", issue = "92521")] +impl const From> for Pin> +where + A: 'static, +{ + /// Converts a `Box` into a `Pin>` + /// + /// This conversion does not allocate on the heap and happens in place. + fn from(boxed: Box) -> Self { + Box::into_pin(boxed) + } +} + +#[cfg(not(no_global_oom_handling))] +#[stable(feature = "box_from_slice", since = "1.17.0")] +impl From<&[T]> for Box<[T]> { + /// Converts a `&[T]` into a `Box<[T]>` + /// + /// This conversion allocates on the heap + /// and performs a copy of `slice`. + /// + /// # Examples + /// ```rust + /// // create a &[u8] which will be used to create a Box<[u8]> + /// let slice: &[u8] = &[104, 101, 108, 108, 111]; + /// let boxed_slice: Box<[u8]> = Box::from(slice); + /// + /// println!("{boxed_slice:?}"); + /// ``` + fn from(slice: &[T]) -> Box<[T]> { + let len = slice.len(); + let buf = RawVec::with_capacity(len); + unsafe { + ptr::copy_nonoverlapping(slice.as_ptr(), buf.ptr(), len); + buf.into_box(slice.len()).assume_init() + } + } +} + +#[cfg(not(no_global_oom_handling))] +#[stable(feature = "box_from_cow", since = "1.45.0")] +impl From> for Box<[T]> { + /// Converts a `Cow<'_, [T]>` into a `Box<[T]>` + /// + /// When `cow` is the `Cow::Borrowed` variant, this + /// conversion allocates on the heap and copies the + /// underlying slice. Otherwise, it will try to reuse the owned + /// `Vec`'s allocation. + #[inline] + fn from(cow: Cow<'_, [T]>) -> Box<[T]> { + match cow { + Cow::Borrowed(slice) => Box::from(slice), + Cow::Owned(slice) => Box::from(slice), + } + } +} + +#[cfg(not(no_global_oom_handling))] +#[stable(feature = "box_from_slice", since = "1.17.0")] +impl From<&str> for Box { + /// Converts a `&str` into a `Box` + /// + /// This conversion allocates on the heap + /// and performs a copy of `s`. + /// + /// # Examples + /// + /// ```rust + /// let boxed: Box = Box::from("hello"); + /// println!("{boxed}"); + /// ``` + #[inline] + fn from(s: &str) -> Box { + unsafe { from_boxed_utf8_unchecked(Box::from(s.as_bytes())) } + } +} + +#[cfg(not(no_global_oom_handling))] +#[stable(feature = "box_from_cow", since = "1.45.0")] +impl From> for Box { + /// Converts a `Cow<'_, str>` into a `Box` + /// + /// When `cow` is the `Cow::Borrowed` variant, this + /// conversion allocates on the heap and copies the + /// underlying `str`. Otherwise, it will try to reuse the owned + /// `String`'s allocation. + /// + /// # Examples + /// + /// ```rust + /// use std::borrow::Cow; + /// + /// let unboxed = Cow::Borrowed("hello"); + /// let boxed: Box = Box::from(unboxed); + /// println!("{boxed}"); + /// ``` + /// + /// ```rust + /// # use std::borrow::Cow; + /// let unboxed = Cow::Owned("hello".to_string()); + /// let boxed: Box = Box::from(unboxed); + /// println!("{boxed}"); + /// ``` + #[inline] + fn from(cow: Cow<'_, str>) -> Box { + match cow { + Cow::Borrowed(s) => Box::from(s), + Cow::Owned(s) => Box::from(s), + } + } +} + +#[stable(feature = "boxed_str_conv", since = "1.19.0")] +impl From> for Box<[u8], A> { + /// Converts a `Box` into a `Box<[u8]>` + /// + /// This conversion does not allocate on the heap and happens in place. + /// + /// # Examples + /// ```rust + /// // create a Box which will be used to create a Box<[u8]> + /// let boxed: Box = Box::from("hello"); + /// let boxed_str: Box<[u8]> = Box::from(boxed); + /// + /// // create a &[u8] which will be used to create a Box<[u8]> + /// let slice: &[u8] = &[104, 101, 108, 108, 111]; + /// let boxed_slice = Box::from(slice); + /// + /// assert_eq!(boxed_slice, boxed_str); + /// ``` + #[inline] + fn from(s: Box) -> Self { + let (raw, alloc) = Box::into_raw_with_allocator(s); + unsafe { Box::from_raw_in(raw as *mut [u8], alloc) } + } +} + +#[cfg(not(no_global_oom_handling))] +#[stable(feature = "box_from_array", since = "1.45.0")] +impl From<[T; N]> for Box<[T]> { + /// Converts a `[T; N]` into a `Box<[T]>` + /// + /// This conversion moves the array to newly heap-allocated memory. + /// + /// # Examples + /// + /// ```rust + /// let boxed: Box<[u8]> = Box::from([4, 2]); + /// println!("{boxed:?}"); + /// ``` + fn from(array: [T; N]) -> Box<[T]> { + box array + } +} + +#[stable(feature = "boxed_slice_try_from", since = "1.43.0")] +impl TryFrom> for Box<[T; N]> { + type Error = Box<[T]>; + + /// Attempts to convert a `Box<[T]>` into a `Box<[T; N]>`. + /// + /// The conversion occurs in-place and does not require a + /// new memory allocation. + /// + /// # Errors + /// + /// Returns the old `Box<[T]>` in the `Err` variant if + /// `boxed_slice.len()` does not equal `N`. + fn try_from(boxed_slice: Box<[T]>) -> Result { + if boxed_slice.len() == N { + Ok(unsafe { Box::from_raw(Box::into_raw(boxed_slice) as *mut [T; N]) }) + } else { + Err(boxed_slice) + } + } +} + +impl Box { + /// Attempt to downcast the box to a concrete type. + /// + /// # Examples + /// + /// ``` + /// use std::any::Any; + /// + /// fn print_if_string(value: Box) { + /// if let Ok(string) = value.downcast::() { + /// println!("String ({}): {}", string.len(), string); + /// } + /// } + /// + /// let my_string = "Hello World".to_string(); + /// print_if_string(Box::new(my_string)); + /// print_if_string(Box::new(0i8)); + /// ``` + #[inline] + #[stable(feature = "rust1", since = "1.0.0")] + pub fn downcast(self) -> Result, Self> { + if self.is::() { unsafe { Ok(self.downcast_unchecked::()) } } else { Err(self) } + } + + /// Downcasts the box to a concrete type. + /// + /// For a safe alternative see [`downcast`]. + /// + /// # Examples + /// + /// ``` + /// #![feature(downcast_unchecked)] + /// + /// use std::any::Any; + /// + /// let x: Box = Box::new(1_usize); + /// + /// unsafe { + /// assert_eq!(*x.downcast_unchecked::(), 1); + /// } + /// ``` + /// + /// # Safety + /// + /// The contained value must be of type `T`. Calling this method + /// with the incorrect type is *undefined behavior*. + /// + /// [`downcast`]: Self::downcast + #[inline] + #[unstable(feature = "downcast_unchecked", issue = "90850")] + pub unsafe fn downcast_unchecked(self) -> Box { + debug_assert!(self.is::()); + unsafe { + let (raw, alloc): (*mut dyn Any, _) = Box::into_raw_with_allocator(self); + Box::from_raw_in(raw as *mut T, alloc) + } + } +} + +impl Box { + /// Attempt to downcast the box to a concrete type. + /// + /// # Examples + /// + /// ``` + /// use std::any::Any; + /// + /// fn print_if_string(value: Box) { + /// if let Ok(string) = value.downcast::() { + /// println!("String ({}): {}", string.len(), string); + /// } + /// } + /// + /// let my_string = "Hello World".to_string(); + /// print_if_string(Box::new(my_string)); + /// print_if_string(Box::new(0i8)); + /// ``` + #[inline] + #[stable(feature = "rust1", since = "1.0.0")] + pub fn downcast(self) -> Result, Self> { + if self.is::() { unsafe { Ok(self.downcast_unchecked::()) } } else { Err(self) } + } + + /// Downcasts the box to a concrete type. + /// + /// For a safe alternative see [`downcast`]. + /// + /// # Examples + /// + /// ``` + /// #![feature(downcast_unchecked)] + /// + /// use std::any::Any; + /// + /// let x: Box = Box::new(1_usize); + /// + /// unsafe { + /// assert_eq!(*x.downcast_unchecked::(), 1); + /// } + /// ``` + /// + /// # Safety + /// + /// The contained value must be of type `T`. Calling this method + /// with the incorrect type is *undefined behavior*. + /// + /// [`downcast`]: Self::downcast + #[inline] + #[unstable(feature = "downcast_unchecked", issue = "90850")] + pub unsafe fn downcast_unchecked(self) -> Box { + debug_assert!(self.is::()); + unsafe { + let (raw, alloc): (*mut (dyn Any + Send), _) = Box::into_raw_with_allocator(self); + Box::from_raw_in(raw as *mut T, alloc) + } + } +} + +impl Box { + /// Attempt to downcast the box to a concrete type. + /// + /// # Examples + /// + /// ``` + /// use std::any::Any; + /// + /// fn print_if_string(value: Box) { + /// if let Ok(string) = value.downcast::() { + /// println!("String ({}): {}", string.len(), string); + /// } + /// } + /// + /// let my_string = "Hello World".to_string(); + /// print_if_string(Box::new(my_string)); + /// print_if_string(Box::new(0i8)); + /// ``` + #[inline] + #[stable(feature = "box_send_sync_any_downcast", since = "1.51.0")] + pub fn downcast(self) -> Result, Self> { + if self.is::() { unsafe { Ok(self.downcast_unchecked::()) } } else { Err(self) } + } + + /// Downcasts the box to a concrete type. + /// + /// For a safe alternative see [`downcast`]. + /// + /// # Examples + /// + /// ``` + /// #![feature(downcast_unchecked)] + /// + /// use std::any::Any; + /// + /// let x: Box = Box::new(1_usize); + /// + /// unsafe { + /// assert_eq!(*x.downcast_unchecked::(), 1); + /// } + /// ``` + /// + /// # Safety + /// + /// The contained value must be of type `T`. Calling this method + /// with the incorrect type is *undefined behavior*. + /// + /// [`downcast`]: Self::downcast + #[inline] + #[unstable(feature = "downcast_unchecked", issue = "90850")] + pub unsafe fn downcast_unchecked(self) -> Box { + debug_assert!(self.is::()); + unsafe { + let (raw, alloc): (*mut (dyn Any + Send + Sync), _) = + Box::into_raw_with_allocator(self); + Box::from_raw_in(raw as *mut T, alloc) + } + } +} + +#[stable(feature = "rust1", since = "1.0.0")] +impl fmt::Display for Box { + fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result { + fmt::Display::fmt(&**self, f) + } +} + +#[stable(feature = "rust1", since = "1.0.0")] +impl fmt::Debug for Box { + fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result { + fmt::Debug::fmt(&**self, f) + } +} + +#[stable(feature = "rust1", since = "1.0.0")] +impl fmt::Pointer for Box { + fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result { + // It's not possible to extract the inner Uniq directly from the Box, + // instead we cast it to a *const which aliases the Unique + let ptr: *const T = &**self; + fmt::Pointer::fmt(&ptr, f) + } +} + +#[stable(feature = "rust1", since = "1.0.0")] +#[rustc_const_unstable(feature = "const_box", issue = "92521")] +impl const Deref for Box { + type Target = T; + + fn deref(&self) -> &T { + &**self + } +} + +#[stable(feature = "rust1", since = "1.0.0")] +#[rustc_const_unstable(feature = "const_box", issue = "92521")] +impl const DerefMut for Box { + fn deref_mut(&mut self) -> &mut T { + &mut **self + } +} + +#[unstable(feature = "receiver_trait", issue = "none")] +impl Receiver for Box {} + +#[stable(feature = "rust1", since = "1.0.0")] +impl Iterator for Box { + type Item = I::Item; + fn next(&mut self) -> Option { + (**self).next() + } + fn size_hint(&self) -> (usize, Option) { + (**self).size_hint() + } + fn nth(&mut self, n: usize) -> Option { + (**self).nth(n) + } + fn last(self) -> Option { + BoxIter::last(self) + } +} + +trait BoxIter { + type Item; + fn last(self) -> Option; +} + +impl BoxIter for Box { + type Item = I::Item; + default fn last(self) -> Option { + #[inline] + fn some(_: Option, x: T) -> Option { + Some(x) + } + + self.fold(None, some) + } +} + +/// Specialization for sized `I`s that uses `I`s implementation of `last()` +/// instead of the default. +#[stable(feature = "rust1", since = "1.0.0")] +impl BoxIter for Box { + fn last(self) -> Option { + (*self).last() + } +} + +#[stable(feature = "rust1", since = "1.0.0")] +impl DoubleEndedIterator for Box { + fn next_back(&mut self) -> Option { + (**self).next_back() + } + fn nth_back(&mut self, n: usize) -> Option { + (**self).nth_back(n) + } +} +#[stable(feature = "rust1", since = "1.0.0")] +impl ExactSizeIterator for Box { + fn len(&self) -> usize { + (**self).len() + } + fn is_empty(&self) -> bool { + (**self).is_empty() + } +} + +#[stable(feature = "fused", since = "1.26.0")] +impl FusedIterator for Box {} + +#[stable(feature = "boxed_closure_impls", since = "1.35.0")] +impl + ?Sized, A: Allocator> FnOnce for Box { + type Output = >::Output; + + extern "rust-call" fn call_once(self, args: Args) -> Self::Output { + >::call_once(*self, args) + } +} + +#[stable(feature = "boxed_closure_impls", since = "1.35.0")] +impl + ?Sized, A: Allocator> FnMut for Box { + extern "rust-call" fn call_mut(&mut self, args: Args) -> Self::Output { + >::call_mut(self, args) + } +} + +#[stable(feature = "boxed_closure_impls", since = "1.35.0")] +impl + ?Sized, A: Allocator> Fn for Box { + extern "rust-call" fn call(&self, args: Args) -> Self::Output { + >::call(self, args) + } +} + +#[unstable(feature = "coerce_unsized", issue = "27732")] +impl, U: ?Sized, A: Allocator> CoerceUnsized> for Box {} + +#[unstable(feature = "dispatch_from_dyn", issue = "none")] +impl, U: ?Sized> DispatchFromDyn> for Box {} + +#[cfg(not(no_global_oom_handling))] +#[stable(feature = "boxed_slice_from_iter", since = "1.32.0")] +impl FromIterator for Box<[I]> { + fn from_iter>(iter: T) -> Self { + iter.into_iter().collect::>().into_boxed_slice() + } +} + +#[cfg(not(no_global_oom_handling))] +#[stable(feature = "box_slice_clone", since = "1.3.0")] +impl Clone for Box<[T], A> { + fn clone(&self) -> Self { + let alloc = Box::allocator(self).clone(); + self.to_vec_in(alloc).into_boxed_slice() + } + + fn clone_from(&mut self, other: &Self) { + if self.len() == other.len() { + self.clone_from_slice(&other); + } else { + *self = other.clone(); + } + } +} + +#[stable(feature = "box_borrow", since = "1.1.0")] +impl borrow::Borrow for Box { + fn borrow(&self) -> &T { + &**self + } +} + +#[stable(feature = "box_borrow", since = "1.1.0")] +impl borrow::BorrowMut for Box { + fn borrow_mut(&mut self) -> &mut T { + &mut **self + } +} + +#[stable(since = "1.5.0", feature = "smart_ptr_as_ref")] +impl AsRef for Box { + fn as_ref(&self) -> &T { + &**self + } +} + +#[stable(since = "1.5.0", feature = "smart_ptr_as_ref")] +impl AsMut for Box { + fn as_mut(&mut self) -> &mut T { + &mut **self + } +} + +/* Nota bene + * + * We could have chosen not to add this impl, and instead have written a + * function of Pin> to Pin. Such a function would not be sound, + * because Box implements Unpin even when T does not, as a result of + * this impl. + * + * We chose this API instead of the alternative for a few reasons: + * - Logically, it is helpful to understand pinning in regard to the + * memory region being pointed to. For this reason none of the + * standard library pointer types support projecting through a pin + * (Box is the only pointer type in std for which this would be + * safe.) + * - It is in practice very useful to have Box be unconditionally + * Unpin because of trait objects, for which the structural auto + * trait functionality does not apply (e.g., Box would + * otherwise not be Unpin). + * + * Another type with the same semantics as Box but only a conditional + * implementation of `Unpin` (where `T: Unpin`) would be valid/safe, and + * could have a method to project a Pin from it. + */ +#[stable(feature = "pin", since = "1.33.0")] +#[rustc_const_unstable(feature = "const_box", issue = "92521")] +impl const Unpin for Box where A: 'static {} + +#[unstable(feature = "generator_trait", issue = "43122")] +impl + Unpin, R, A: Allocator> Generator for Box +where + A: 'static, +{ + type Yield = G::Yield; + type Return = G::Return; + + fn resume(mut self: Pin<&mut Self>, arg: R) -> GeneratorState { + G::resume(Pin::new(&mut *self), arg) + } +} + +#[unstable(feature = "generator_trait", issue = "43122")] +impl, R, A: Allocator> Generator for Pin> +where + A: 'static, +{ + type Yield = G::Yield; + type Return = G::Return; + + fn resume(mut self: Pin<&mut Self>, arg: R) -> GeneratorState { + G::resume((*self).as_mut(), arg) + } +} + +#[stable(feature = "futures_api", since = "1.36.0")] +impl Future for Box +where + A: 'static, +{ + type Output = F::Output; + + fn poll(mut self: Pin<&mut Self>, cx: &mut Context<'_>) -> Poll { + F::poll(Pin::new(&mut *self), cx) + } +} + +#[unstable(feature = "async_iterator", issue = "79024")] +impl AsyncIterator for Box { + type Item = S::Item; + + fn poll_next(mut self: Pin<&mut Self>, cx: &mut Context<'_>) -> Poll> { + Pin::new(&mut **self).poll_next(cx) + } + + fn size_hint(&self) -> (usize, Option) { + (**self).size_hint() + } +} diff --git a/rust/alloc/collections/mod.rs b/rust/alloc/collections/mod.rs new file mode 100644 index 000000000..1eec265b2 --- /dev/null +++ b/rust/alloc/collections/mod.rs @@ -0,0 +1,156 @@ +// SPDX-License-Identifier: Apache-2.0 OR MIT + +//! Collection types. + +#![stable(feature = "rust1", since = "1.0.0")] + +#[cfg(not(no_global_oom_handling))] +pub mod binary_heap; +#[cfg(not(no_global_oom_handling))] +mod btree; +#[cfg(not(no_global_oom_handling))] +pub mod linked_list; +#[cfg(not(no_global_oom_handling))] +pub mod vec_deque; + +#[cfg(not(no_global_oom_handling))] +#[stable(feature = "rust1", since = "1.0.0")] +pub mod btree_map { + //! An ordered map based on a B-Tree. + #[stable(feature = "rust1", since = "1.0.0")] + pub use super::btree::map::*; +} + +#[cfg(not(no_global_oom_handling))] +#[stable(feature = "rust1", since = "1.0.0")] +pub mod btree_set { + //! An ordered set based on a B-Tree. + #[stable(feature = "rust1", since = "1.0.0")] + pub use super::btree::set::*; +} + +#[cfg(not(no_global_oom_handling))] +#[stable(feature = "rust1", since = "1.0.0")] +#[doc(no_inline)] +pub use binary_heap::BinaryHeap; + +#[cfg(not(no_global_oom_handling))] +#[stable(feature = "rust1", since = "1.0.0")] +#[doc(no_inline)] +pub use btree_map::BTreeMap; + +#[cfg(not(no_global_oom_handling))] +#[stable(feature = "rust1", since = "1.0.0")] +#[doc(no_inline)] +pub use btree_set::BTreeSet; + +#[cfg(not(no_global_oom_handling))] +#[stable(feature = "rust1", since = "1.0.0")] +#[doc(no_inline)] +pub use linked_list::LinkedList; + +#[cfg(not(no_global_oom_handling))] +#[stable(feature = "rust1", since = "1.0.0")] +#[doc(no_inline)] +pub use vec_deque::VecDeque; + +use crate::alloc::{Layout, LayoutError}; +use core::fmt::Display; + +/// The error type for `try_reserve` methods. +#[derive(Clone, PartialEq, Eq, Debug)] +#[stable(feature = "try_reserve", since = "1.57.0")] +pub struct TryReserveError { + kind: TryReserveErrorKind, +} + +impl TryReserveError { + /// Details about the allocation that caused the error + #[inline] + #[must_use] + #[unstable( + feature = "try_reserve_kind", + reason = "Uncertain how much info should be exposed", + issue = "48043" + )] + pub fn kind(&self) -> TryReserveErrorKind { + self.kind.clone() + } +} + +/// Details of the allocation that caused a `TryReserveError` +#[derive(Clone, PartialEq, Eq, Debug)] +#[unstable( + feature = "try_reserve_kind", + reason = "Uncertain how much info should be exposed", + issue = "48043" +)] +pub enum TryReserveErrorKind { + /// Error due to the computed capacity exceeding the collection's maximum + /// (usually `isize::MAX` bytes). + CapacityOverflow, + + /// The memory allocator returned an error + AllocError { + /// The layout of allocation request that failed + layout: Layout, + + #[doc(hidden)] + #[unstable( + feature = "container_error_extra", + issue = "none", + reason = "\ + Enable exposing the allocator’s custom error value \ + if an associated type is added in the future: \ + https://github.com/rust-lang/wg-allocators/issues/23" + )] + non_exhaustive: (), + }, +} + +#[unstable( + feature = "try_reserve_kind", + reason = "Uncertain how much info should be exposed", + issue = "48043" +)] +impl From for TryReserveError { + #[inline] + fn from(kind: TryReserveErrorKind) -> Self { + Self { kind } + } +} + +#[unstable(feature = "try_reserve_kind", reason = "new API", issue = "48043")] +impl From for TryReserveErrorKind { + /// Always evaluates to [`TryReserveErrorKind::CapacityOverflow`]. + #[inline] + fn from(_: LayoutError) -> Self { + TryReserveErrorKind::CapacityOverflow + } +} + +#[stable(feature = "try_reserve", since = "1.57.0")] +impl Display for TryReserveError { + fn fmt( + &self, + fmt: &mut core::fmt::Formatter<'_>, + ) -> core::result::Result<(), core::fmt::Error> { + fmt.write_str("memory allocation failed")?; + let reason = match self.kind { + TryReserveErrorKind::CapacityOverflow => { + " because the computed capacity exceeded the collection's maximum" + } + TryReserveErrorKind::AllocError { .. } => { + " because the memory allocator returned a error" + } + }; + fmt.write_str(reason) + } +} + +/// An intermediate trait for specialization of `Extend`. +#[doc(hidden)] +trait SpecExtend { + /// Extends `self` with the contents of the given iterator. + fn spec_extend(&mut self, iter: I); +} diff --git a/rust/alloc/lib.rs b/rust/alloc/lib.rs new file mode 100644 index 000000000..233bcd5e4 --- /dev/null +++ b/rust/alloc/lib.rs @@ -0,0 +1,244 @@ +// SPDX-License-Identifier: Apache-2.0 OR MIT + +//! # The Rust core allocation and collections library +//! +//! This library provides smart pointers and collections for managing +//! heap-allocated values. +//! +//! This library, like libcore, normally doesn’t need to be used directly +//! since its contents are re-exported in the [`std` crate](../std/index.html). +//! Crates that use the `#![no_std]` attribute however will typically +//! not depend on `std`, so they’d use this crate instead. +//! +//! ## Boxed values +//! +//! The [`Box`] type is a smart pointer type. There can only be one owner of a +//! [`Box`], and the owner can decide to mutate the contents, which live on the +//! heap. +//! +//! This type can be sent among threads efficiently as the size of a `Box` value +//! is the same as that of a pointer. Tree-like data structures are often built +//! with boxes because each node often has only one owner, the parent. +//! +//! ## Reference counted pointers +//! +//! The [`Rc`] type is a non-threadsafe reference-counted pointer type intended +//! for sharing memory within a thread. An [`Rc`] pointer wraps a type, `T`, and +//! only allows access to `&T`, a shared reference. +//! +//! This type is useful when inherited mutability (such as using [`Box`]) is too +//! constraining for an application, and is often paired with the [`Cell`] or +//! [`RefCell`] types in order to allow mutation. +//! +//! ## Atomically reference counted pointers +//! +//! The [`Arc`] type is the threadsafe equivalent of the [`Rc`] type. It +//! provides all the same functionality of [`Rc`], except it requires that the +//! contained type `T` is shareable. Additionally, [`Arc`][`Arc`] is itself +//! sendable while [`Rc`][`Rc`] is not. +//! +//! This type allows for shared access to the contained data, and is often +//! paired with synchronization primitives such as mutexes to allow mutation of +//! shared resources. +//! +//! ## Collections +//! +//! Implementations of the most common general purpose data structures are +//! defined in this library. They are re-exported through the +//! [standard collections library](../std/collections/index.html). +//! +//! ## Heap interfaces +//! +//! The [`alloc`](alloc/index.html) module defines the low-level interface to the +//! default global allocator. It is not compatible with the libc allocator API. +//! +//! [`Arc`]: sync +//! [`Box`]: boxed +//! [`Cell`]: core::cell +//! [`Rc`]: rc +//! [`RefCell`]: core::cell + +// To run liballoc tests without x.py without ending up with two copies of liballoc, Miri needs to be +// able to "empty" this crate. See . +// rustc itself never sets the feature, so this line has no affect there. +#![cfg(any(not(feature = "miri-test-libstd"), test, doctest))] +#![allow(unused_attributes)] +#![stable(feature = "alloc", since = "1.36.0")] +#![doc( + html_playground_url = "https://play.rust-lang.org/", + issue_tracker_base_url = "https://github.com/rust-lang/rust/issues/", + test(no_crate_inject, attr(allow(unused_variables), deny(warnings))) +)] +#![doc(cfg_hide( + not(test), + not(any(test, bootstrap)), + any(not(feature = "miri-test-libstd"), test, doctest), + no_global_oom_handling, + not(no_global_oom_handling), + target_has_atomic = "ptr" +))] +#![no_std] +#![needs_allocator] +// +// Lints: +#![deny(unsafe_op_in_unsafe_fn)] +#![warn(deprecated_in_future)] +#![warn(missing_debug_implementations)] +#![warn(missing_docs)] +#![allow(explicit_outlives_requirements)] +// +// Library features: +#![cfg_attr(not(no_global_oom_handling), feature(alloc_c_string))] +#![feature(alloc_layout_extra)] +#![feature(allocator_api)] +#![feature(array_chunks)] +#![feature(array_methods)] +#![feature(array_windows)] +#![feature(assert_matches)] +#![feature(async_iterator)] +#![feature(coerce_unsized)] +#![cfg_attr(not(no_global_oom_handling), feature(const_alloc_error))] +#![feature(const_box)] +#![cfg_attr(not(no_global_oom_handling), feature(const_btree_new))] +#![feature(const_cow_is_borrowed)] +#![feature(const_convert)] +#![feature(const_size_of_val)] +#![feature(const_align_of_val)] +#![feature(const_ptr_read)] +#![feature(const_maybe_uninit_write)] +#![feature(const_maybe_uninit_as_mut_ptr)] +#![feature(const_refs_to_cell)] +#![feature(core_c_str)] +#![feature(core_intrinsics)] +#![feature(core_ffi_c)] +#![feature(const_eval_select)] +#![feature(const_pin)] +#![feature(cstr_from_bytes_until_nul)] +#![feature(dispatch_from_dyn)] +#![feature(exact_size_is_empty)] +#![feature(extend_one)] +#![feature(fmt_internals)] +#![feature(fn_traits)] +#![feature(hasher_prefixfree_extras)] +#![feature(inplace_iteration)] +#![feature(iter_advance_by)] +#![feature(layout_for_ptr)] +#![feature(maybe_uninit_slice)] +#![cfg_attr(test, feature(new_uninit))] +#![feature(nonnull_slice_from_raw_parts)] +#![feature(pattern)] +#![feature(ptr_internals)] +#![feature(ptr_metadata)] +#![feature(ptr_sub_ptr)] +#![feature(receiver_trait)] +#![feature(set_ptr_value)] +#![feature(slice_group_by)] +#![feature(slice_ptr_get)] +#![feature(slice_ptr_len)] +#![feature(slice_range)] +#![feature(str_internals)] +#![feature(strict_provenance)] +#![feature(trusted_len)] +#![feature(trusted_random_access)] +#![feature(try_trait_v2)] +#![feature(unchecked_math)] +#![feature(unicode_internals)] +#![feature(unsize)] +// +// Language features: +#![feature(allocator_internals)] +#![feature(allow_internal_unstable)] +#![feature(associated_type_bounds)] +#![feature(box_syntax)] +#![feature(cfg_sanitize)] +#![feature(const_deref)] +#![feature(const_mut_refs)] +#![feature(const_ptr_write)] +#![feature(const_precise_live_drops)] +#![feature(const_trait_impl)] +#![feature(const_try)] +#![feature(dropck_eyepatch)] +#![feature(exclusive_range_pattern)] +#![feature(fundamental)] +#![cfg_attr(not(test), feature(generator_trait))] +#![feature(hashmap_internals)] +#![feature(lang_items)] +#![feature(let_else)] +#![feature(min_specialization)] +#![feature(negative_impls)] +#![feature(never_type)] +#![feature(nll)] // Not necessary, but here to test the `nll` feature. +#![feature(rustc_allow_const_fn_unstable)] +#![feature(rustc_attrs)] +#![feature(slice_internals)] +#![feature(staged_api)] +#![cfg_attr(test, feature(test))] +#![feature(unboxed_closures)] +#![feature(unsized_fn_params)] +#![feature(c_unwind)] +// +// Rustdoc features: +#![feature(doc_cfg)] +#![feature(doc_cfg_hide)] +// Technically, this is a bug in rustdoc: rustdoc sees the documentation on `#[lang = slice_alloc]` +// blocks is for `&[T]`, which also has documentation using this feature in `core`, and gets mad +// that the feature-gate isn't enabled. Ideally, it wouldn't check for the feature gate for docs +// from other crates, but since this can only appear for lang items, it doesn't seem worth fixing. +#![feature(intra_doc_pointers)] + +// Allow testing this library +#[cfg(test)] +#[macro_use] +extern crate std; +#[cfg(test)] +extern crate test; + +// Module with internal macros used by other modules (needs to be included before other modules). +#[cfg(not(no_macros))] +#[macro_use] +mod macros; + +mod raw_vec; + +// Heaps provided for low-level allocation strategies + +pub mod alloc; + +// Primitive types using the heaps above + +// Need to conditionally define the mod from `boxed.rs` to avoid +// duplicating the lang-items when building in test cfg; but also need +// to allow code to have `use boxed::Box;` declarations. +#[cfg(not(test))] +pub mod boxed; +#[cfg(test)] +mod boxed { + pub use std::boxed::Box; +} +pub mod borrow; +pub mod collections; +#[cfg(not(no_global_oom_handling))] +pub mod ffi; +#[cfg(not(no_fmt))] +pub mod fmt; +#[cfg(not(no_rc))] +pub mod rc; +pub mod slice; +#[cfg(not(no_str))] +pub mod str; +#[cfg(not(no_string))] +pub mod string; +#[cfg(not(no_sync))] +#[cfg(target_has_atomic = "ptr")] +pub mod sync; +#[cfg(all(not(no_global_oom_handling), target_has_atomic = "ptr"))] +pub mod task; +#[cfg(test)] +mod tests; +pub mod vec; + +#[doc(hidden)] +#[unstable(feature = "liballoc_internals", issue = "none", reason = "implementation detail")] +pub mod __export { + pub use core::format_args; +} diff --git a/rust/alloc/raw_vec.rs b/rust/alloc/raw_vec.rs new file mode 100644 index 000000000..daf5f2da7 --- /dev/null +++ b/rust/alloc/raw_vec.rs @@ -0,0 +1,527 @@ +// SPDX-License-Identifier: Apache-2.0 OR MIT + +#![unstable(feature = "raw_vec_internals", reason = "unstable const warnings", issue = "none")] + +use core::alloc::LayoutError; +use core::cmp; +use core::intrinsics; +use core::mem::{self, ManuallyDrop, MaybeUninit}; +use core::ops::Drop; +use core::ptr::{self, NonNull, Unique}; +use core::slice; + +#[cfg(not(no_global_oom_handling))] +use crate::alloc::handle_alloc_error; +use crate::alloc::{Allocator, Global, Layout}; +use crate::boxed::Box; +use crate::collections::TryReserveError; +use crate::collections::TryReserveErrorKind::*; + +#[cfg(test)] +mod tests; + +#[cfg(not(no_global_oom_handling))] +enum AllocInit { + /// The contents of the new memory are uninitialized. + Uninitialized, + /// The new memory is guaranteed to be zeroed. + Zeroed, +} + +/// A low-level utility for more ergonomically allocating, reallocating, and deallocating +/// a buffer of memory on the heap without having to worry about all the corner cases +/// involved. This type is excellent for building your own data structures like Vec and VecDeque. +/// In particular: +/// +/// * Produces `Unique::dangling()` on zero-sized types. +/// * Produces `Unique::dangling()` on zero-length allocations. +/// * Avoids freeing `Unique::dangling()`. +/// * Catches all overflows in capacity computations (promotes them to "capacity overflow" panics). +/// * Guards against 32-bit systems allocating more than isize::MAX bytes. +/// * Guards against overflowing your length. +/// * Calls `handle_alloc_error` for fallible allocations. +/// * Contains a `ptr::Unique` and thus endows the user with all related benefits. +/// * Uses the excess returned from the allocator to use the largest available capacity. +/// +/// This type does not in anyway inspect the memory that it manages. When dropped it *will* +/// free its memory, but it *won't* try to drop its contents. It is up to the user of `RawVec` +/// to handle the actual things *stored* inside of a `RawVec`. +/// +/// Note that the excess of a zero-sized types is always infinite, so `capacity()` always returns +/// `usize::MAX`. This means that you need to be careful when round-tripping this type with a +/// `Box<[T]>`, since `capacity()` won't yield the length. +#[allow(missing_debug_implementations)] +pub(crate) struct RawVec { + ptr: Unique, + cap: usize, + alloc: A, +} + +impl RawVec { + /// HACK(Centril): This exists because stable `const fn` can only call stable `const fn`, so + /// they cannot call `Self::new()`. + /// + /// If you change `RawVec::new` or dependencies, please take care to not introduce anything + /// that would truly const-call something unstable. + pub const NEW: Self = Self::new(); + + /// Creates the biggest possible `RawVec` (on the system heap) + /// without allocating. If `T` has positive size, then this makes a + /// `RawVec` with capacity `0`. If `T` is zero-sized, then it makes a + /// `RawVec` with capacity `usize::MAX`. Useful for implementing + /// delayed allocation. + #[must_use] + pub const fn new() -> Self { + Self::new_in(Global) + } + + /// Creates a `RawVec` (on the system heap) with exactly the + /// capacity and alignment requirements for a `[T; capacity]`. This is + /// equivalent to calling `RawVec::new` when `capacity` is `0` or `T` is + /// zero-sized. Note that if `T` is zero-sized this means you will + /// *not* get a `RawVec` with the requested capacity. + /// + /// # Panics + /// + /// Panics if the requested capacity exceeds `isize::MAX` bytes. + /// + /// # Aborts + /// + /// Aborts on OOM. + #[cfg(not(any(no_global_oom_handling, test)))] + #[must_use] + #[inline] + pub fn with_capacity(capacity: usize) -> Self { + Self::with_capacity_in(capacity, Global) + } + + /// Like `with_capacity`, but guarantees the buffer is zeroed. + #[cfg(not(any(no_global_oom_handling, test)))] + #[must_use] + #[inline] + pub fn with_capacity_zeroed(capacity: usize) -> Self { + Self::with_capacity_zeroed_in(capacity, Global) + } +} + +impl RawVec { + // Tiny Vecs are dumb. Skip to: + // - 8 if the element size is 1, because any heap allocators is likely + // to round up a request of less than 8 bytes to at least 8 bytes. + // - 4 if elements are moderate-sized (<= 1 KiB). + // - 1 otherwise, to avoid wasting too much space for very short Vecs. + pub(crate) const MIN_NON_ZERO_CAP: usize = if mem::size_of::() == 1 { + 8 + } else if mem::size_of::() <= 1024 { + 4 + } else { + 1 + }; + + /// Like `new`, but parameterized over the choice of allocator for + /// the returned `RawVec`. + pub const fn new_in(alloc: A) -> Self { + // `cap: 0` means "unallocated". zero-sized types are ignored. + Self { ptr: Unique::dangling(), cap: 0, alloc } + } + + /// Like `with_capacity`, but parameterized over the choice of + /// allocator for the returned `RawVec`. + #[cfg(not(no_global_oom_handling))] + #[inline] + pub fn with_capacity_in(capacity: usize, alloc: A) -> Self { + Self::allocate_in(capacity, AllocInit::Uninitialized, alloc) + } + + /// Like `with_capacity_zeroed`, but parameterized over the choice + /// of allocator for the returned `RawVec`. + #[cfg(not(no_global_oom_handling))] + #[inline] + pub fn with_capacity_zeroed_in(capacity: usize, alloc: A) -> Self { + Self::allocate_in(capacity, AllocInit::Zeroed, alloc) + } + + /// Converts the entire buffer into `Box<[MaybeUninit]>` with the specified `len`. + /// + /// Note that this will correctly reconstitute any `cap` changes + /// that may have been performed. (See description of type for details.) + /// + /// # Safety + /// + /// * `len` must be greater than or equal to the most recently requested capacity, and + /// * `len` must be less than or equal to `self.capacity()`. + /// + /// Note, that the requested capacity and `self.capacity()` could differ, as + /// an allocator could overallocate and return a greater memory block than requested. + pub unsafe fn into_box(self, len: usize) -> Box<[MaybeUninit], A> { + // Sanity-check one half of the safety requirement (we cannot check the other half). + debug_assert!( + len <= self.capacity(), + "`len` must be smaller than or equal to `self.capacity()`" + ); + + let me = ManuallyDrop::new(self); + unsafe { + let slice = slice::from_raw_parts_mut(me.ptr() as *mut MaybeUninit, len); + Box::from_raw_in(slice, ptr::read(&me.alloc)) + } + } + + #[cfg(not(no_global_oom_handling))] + fn allocate_in(capacity: usize, init: AllocInit, alloc: A) -> Self { + // Don't allocate here because `Drop` will not deallocate when `capacity` is 0. + if mem::size_of::() == 0 || capacity == 0 { + Self::new_in(alloc) + } else { + // We avoid `unwrap_or_else` here because it bloats the amount of + // LLVM IR generated. + let layout = match Layout::array::(capacity) { + Ok(layout) => layout, + Err(_) => capacity_overflow(), + }; + match alloc_guard(layout.size()) { + Ok(_) => {} + Err(_) => capacity_overflow(), + } + let result = match init { + AllocInit::Uninitialized => alloc.allocate(layout), + AllocInit::Zeroed => alloc.allocate_zeroed(layout), + }; + let ptr = match result { + Ok(ptr) => ptr, + Err(_) => handle_alloc_error(layout), + }; + + // Allocators currently return a `NonNull<[u8]>` whose length + // matches the size requested. If that ever changes, the capacity + // here should change to `ptr.len() / mem::size_of::()`. + Self { + ptr: unsafe { Unique::new_unchecked(ptr.cast().as_ptr()) }, + cap: capacity, + alloc, + } + } + } + + /// Reconstitutes a `RawVec` from a pointer, capacity, and allocator. + /// + /// # Safety + /// + /// The `ptr` must be allocated (via the given allocator `alloc`), and with the given + /// `capacity`. + /// The `capacity` cannot exceed `isize::MAX` for sized types. (only a concern on 32-bit + /// systems). ZST vectors may have a capacity up to `usize::MAX`. + /// If the `ptr` and `capacity` come from a `RawVec` created via `alloc`, then this is + /// guaranteed. + #[inline] + pub unsafe fn from_raw_parts_in(ptr: *mut T, capacity: usize, alloc: A) -> Self { + Self { ptr: unsafe { Unique::new_unchecked(ptr) }, cap: capacity, alloc } + } + + /// Gets a raw pointer to the start of the allocation. Note that this is + /// `Unique::dangling()` if `capacity == 0` or `T` is zero-sized. In the former case, you must + /// be careful. + #[inline] + pub fn ptr(&self) -> *mut T { + self.ptr.as_ptr() + } + + /// Gets the capacity of the allocation. + /// + /// This will always be `usize::MAX` if `T` is zero-sized. + #[inline(always)] + pub fn capacity(&self) -> usize { + if mem::size_of::() == 0 { usize::MAX } else { self.cap } + } + + /// Returns a shared reference to the allocator backing this `RawVec`. + pub fn allocator(&self) -> &A { + &self.alloc + } + + fn current_memory(&self) -> Option<(NonNull, Layout)> { + if mem::size_of::() == 0 || self.cap == 0 { + None + } else { + // We have an allocated chunk of memory, so we can bypass runtime + // checks to get our current layout. + unsafe { + let layout = Layout::array::(self.cap).unwrap_unchecked(); + Some((self.ptr.cast().into(), layout)) + } + } + } + + /// Ensures that the buffer contains at least enough space to hold `len + + /// additional` elements. If it doesn't already have enough capacity, will + /// reallocate enough space plus comfortable slack space to get amortized + /// *O*(1) behavior. Will limit this behavior if it would needlessly cause + /// itself to panic. + /// + /// If `len` exceeds `self.capacity()`, this may fail to actually allocate + /// the requested space. This is not really unsafe, but the unsafe + /// code *you* write that relies on the behavior of this function may break. + /// + /// This is ideal for implementing a bulk-push operation like `extend`. + /// + /// # Panics + /// + /// Panics if the new capacity exceeds `isize::MAX` bytes. + /// + /// # Aborts + /// + /// Aborts on OOM. + #[cfg(not(no_global_oom_handling))] + #[inline] + pub fn reserve(&mut self, len: usize, additional: usize) { + // Callers expect this function to be very cheap when there is already sufficient capacity. + // Therefore, we move all the resizing and error-handling logic from grow_amortized and + // handle_reserve behind a call, while making sure that this function is likely to be + // inlined as just a comparison and a call if the comparison fails. + #[cold] + fn do_reserve_and_handle( + slf: &mut RawVec, + len: usize, + additional: usize, + ) { + handle_reserve(slf.grow_amortized(len, additional)); + } + + if self.needs_to_grow(len, additional) { + do_reserve_and_handle(self, len, additional); + } + } + + /// A specialized version of `reserve()` used only by the hot and + /// oft-instantiated `Vec::push()`, which does its own capacity check. + #[cfg(not(no_global_oom_handling))] + #[inline(never)] + pub fn reserve_for_push(&mut self, len: usize) { + handle_reserve(self.grow_amortized(len, 1)); + } + + /// The same as `reserve`, but returns on errors instead of panicking or aborting. + pub fn try_reserve(&mut self, len: usize, additional: usize) -> Result<(), TryReserveError> { + if self.needs_to_grow(len, additional) { + self.grow_amortized(len, additional) + } else { + Ok(()) + } + } + + /// The same as `reserve_for_push`, but returns on errors instead of panicking or aborting. + #[inline(never)] + pub fn try_reserve_for_push(&mut self, len: usize) -> Result<(), TryReserveError> { + self.grow_amortized(len, 1) + } + + /// Ensures that the buffer contains at least enough space to hold `len + + /// additional` elements. If it doesn't already, will reallocate the + /// minimum possible amount of memory necessary. Generally this will be + /// exactly the amount of memory necessary, but in principle the allocator + /// is free to give back more than we asked for. + /// + /// If `len` exceeds `self.capacity()`, this may fail to actually allocate + /// the requested space. This is not really unsafe, but the unsafe code + /// *you* write that relies on the behavior of this function may break. + /// + /// # Panics + /// + /// Panics if the new capacity exceeds `isize::MAX` bytes. + /// + /// # Aborts + /// + /// Aborts on OOM. + #[cfg(not(no_global_oom_handling))] + pub fn reserve_exact(&mut self, len: usize, additional: usize) { + handle_reserve(self.try_reserve_exact(len, additional)); + } + + /// The same as `reserve_exact`, but returns on errors instead of panicking or aborting. + pub fn try_reserve_exact( + &mut self, + len: usize, + additional: usize, + ) -> Result<(), TryReserveError> { + if self.needs_to_grow(len, additional) { self.grow_exact(len, additional) } else { Ok(()) } + } + + /// Shrinks the buffer down to the specified capacity. If the given amount + /// is 0, actually completely deallocates. + /// + /// # Panics + /// + /// Panics if the given amount is *larger* than the current capacity. + /// + /// # Aborts + /// + /// Aborts on OOM. + #[cfg(not(no_global_oom_handling))] + pub fn shrink_to_fit(&mut self, cap: usize) { + handle_reserve(self.shrink(cap)); + } +} + +impl RawVec { + /// Returns if the buffer needs to grow to fulfill the needed extra capacity. + /// Mainly used to make inlining reserve-calls possible without inlining `grow`. + fn needs_to_grow(&self, len: usize, additional: usize) -> bool { + additional > self.capacity().wrapping_sub(len) + } + + fn set_ptr_and_cap(&mut self, ptr: NonNull<[u8]>, cap: usize) { + // Allocators currently return a `NonNull<[u8]>` whose length matches + // the size requested. If that ever changes, the capacity here should + // change to `ptr.len() / mem::size_of::()`. + self.ptr = unsafe { Unique::new_unchecked(ptr.cast().as_ptr()) }; + self.cap = cap; + } + + // This method is usually instantiated many times. So we want it to be as + // small as possible, to improve compile times. But we also want as much of + // its contents to be statically computable as possible, to make the + // generated code run faster. Therefore, this method is carefully written + // so that all of the code that depends on `T` is within it, while as much + // of the code that doesn't depend on `T` as possible is in functions that + // are non-generic over `T`. + fn grow_amortized(&mut self, len: usize, additional: usize) -> Result<(), TryReserveError> { + // This is ensured by the calling contexts. + debug_assert!(additional > 0); + + if mem::size_of::() == 0 { + // Since we return a capacity of `usize::MAX` when `elem_size` is + // 0, getting to here necessarily means the `RawVec` is overfull. + return Err(CapacityOverflow.into()); + } + + // Nothing we can really do about these checks, sadly. + let required_cap = len.checked_add(additional).ok_or(CapacityOverflow)?; + + // This guarantees exponential growth. The doubling cannot overflow + // because `cap <= isize::MAX` and the type of `cap` is `usize`. + let cap = cmp::max(self.cap * 2, required_cap); + let cap = cmp::max(Self::MIN_NON_ZERO_CAP, cap); + + let new_layout = Layout::array::(cap); + + // `finish_grow` is non-generic over `T`. + let ptr = finish_grow(new_layout, self.current_memory(), &mut self.alloc)?; + self.set_ptr_and_cap(ptr, cap); + Ok(()) + } + + // The constraints on this method are much the same as those on + // `grow_amortized`, but this method is usually instantiated less often so + // it's less critical. + fn grow_exact(&mut self, len: usize, additional: usize) -> Result<(), TryReserveError> { + if mem::size_of::() == 0 { + // Since we return a capacity of `usize::MAX` when the type size is + // 0, getting to here necessarily means the `RawVec` is overfull. + return Err(CapacityOverflow.into()); + } + + let cap = len.checked_add(additional).ok_or(CapacityOverflow)?; + let new_layout = Layout::array::(cap); + + // `finish_grow` is non-generic over `T`. + let ptr = finish_grow(new_layout, self.current_memory(), &mut self.alloc)?; + self.set_ptr_and_cap(ptr, cap); + Ok(()) + } + + #[allow(dead_code)] + fn shrink(&mut self, cap: usize) -> Result<(), TryReserveError> { + assert!(cap <= self.capacity(), "Tried to shrink to a larger capacity"); + + let (ptr, layout) = if let Some(mem) = self.current_memory() { mem } else { return Ok(()) }; + + let ptr = unsafe { + // `Layout::array` cannot overflow here because it would have + // overflowed earlier when capacity was larger. + let new_layout = Layout::array::(cap).unwrap_unchecked(); + self.alloc + .shrink(ptr, layout, new_layout) + .map_err(|_| AllocError { layout: new_layout, non_exhaustive: () })? + }; + self.set_ptr_and_cap(ptr, cap); + Ok(()) + } +} + +// This function is outside `RawVec` to minimize compile times. See the comment +// above `RawVec::grow_amortized` for details. (The `A` parameter isn't +// significant, because the number of different `A` types seen in practice is +// much smaller than the number of `T` types.) +#[inline(never)] +fn finish_grow( + new_layout: Result, + current_memory: Option<(NonNull, Layout)>, + alloc: &mut A, +) -> Result, TryReserveError> +where + A: Allocator, +{ + // Check for the error here to minimize the size of `RawVec::grow_*`. + let new_layout = new_layout.map_err(|_| CapacityOverflow)?; + + alloc_guard(new_layout.size())?; + + let memory = if let Some((ptr, old_layout)) = current_memory { + debug_assert_eq!(old_layout.align(), new_layout.align()); + unsafe { + // The allocator checks for alignment equality + intrinsics::assume(old_layout.align() == new_layout.align()); + alloc.grow(ptr, old_layout, new_layout) + } + } else { + alloc.allocate(new_layout) + }; + + memory.map_err(|_| AllocError { layout: new_layout, non_exhaustive: () }.into()) +} + +unsafe impl<#[may_dangle] T, A: Allocator> Drop for RawVec { + /// Frees the memory owned by the `RawVec` *without* trying to drop its contents. + fn drop(&mut self) { + if let Some((ptr, layout)) = self.current_memory() { + unsafe { self.alloc.deallocate(ptr, layout) } + } + } +} + +// Central function for reserve error handling. +#[cfg(not(no_global_oom_handling))] +#[inline] +fn handle_reserve(result: Result<(), TryReserveError>) { + match result.map_err(|e| e.kind()) { + Err(CapacityOverflow) => capacity_overflow(), + Err(AllocError { layout, .. }) => handle_alloc_error(layout), + Ok(()) => { /* yay */ } + } +} + +// We need to guarantee the following: +// * We don't ever allocate `> isize::MAX` byte-size objects. +// * We don't overflow `usize::MAX` and actually allocate too little. +// +// On 64-bit we just need to check for overflow since trying to allocate +// `> isize::MAX` bytes will surely fail. On 32-bit and 16-bit we need to add +// an extra guard for this in case we're running on a platform which can use +// all 4GB in user-space, e.g., PAE or x32. + +#[inline] +fn alloc_guard(alloc_size: usize) -> Result<(), TryReserveError> { + if usize::BITS < 64 && alloc_size > isize::MAX as usize { + Err(CapacityOverflow.into()) + } else { + Ok(()) + } +} + +// One central function responsible for reporting capacity overflows. This'll +// ensure that the code generation related to these panics is minimal as there's +// only one location which panics rather than a bunch throughout the module. +#[cfg(not(no_global_oom_handling))] +fn capacity_overflow() -> ! { + panic!("capacity overflow"); +} diff --git a/rust/alloc/slice.rs b/rust/alloc/slice.rs new file mode 100644 index 000000000..e444e97fa --- /dev/null +++ b/rust/alloc/slice.rs @@ -0,0 +1,1204 @@ +// SPDX-License-Identifier: Apache-2.0 OR MIT + +//! A dynamically-sized view into a contiguous sequence, `[T]`. +//! +//! *[See also the slice primitive type](slice).* +//! +//! Slices are a view into a block of memory represented as a pointer and a +//! length. +//! +//! ``` +//! // slicing a Vec +//! let vec = vec![1, 2, 3]; +//! let int_slice = &vec[..]; +//! // coercing an array to a slice +//! let str_slice: &[&str] = &["one", "two", "three"]; +//! ``` +//! +//! Slices are either mutable or shared. The shared slice type is `&[T]`, +//! while the mutable slice type is `&mut [T]`, where `T` represents the element +//! type. For example, you can mutate the block of memory that a mutable slice +//! points to: +//! +//! ``` +//! let x = &mut [1, 2, 3]; +//! x[1] = 7; +//! assert_eq!(x, &[1, 7, 3]); +//! ``` +//! +//! Here are some of the things this module contains: +//! +//! ## Structs +//! +//! There are several structs that are useful for slices, such as [`Iter`], which +//! represents iteration over a slice. +//! +//! ## Trait Implementations +//! +//! There are several implementations of common traits for slices. Some examples +//! include: +//! +//! * [`Clone`] +//! * [`Eq`], [`Ord`] - for slices whose element type are [`Eq`] or [`Ord`]. +//! * [`Hash`] - for slices whose element type is [`Hash`]. +//! +//! ## Iteration +//! +//! The slices implement `IntoIterator`. The iterator yields references to the +//! slice elements. +//! +//! ``` +//! let numbers = &[0, 1, 2]; +//! for n in numbers { +//! println!("{n} is a number!"); +//! } +//! ``` +//! +//! The mutable slice yields mutable references to the elements: +//! +//! ``` +//! let mut scores = [7, 8, 9]; +//! for score in &mut scores[..] { +//! *score += 1; +//! } +//! ``` +//! +//! This iterator yields mutable references to the slice's elements, so while +//! the element type of the slice is `i32`, the element type of the iterator is +//! `&mut i32`. +//! +//! * [`.iter`] and [`.iter_mut`] are the explicit methods to return the default +//! iterators. +//! * Further methods that return iterators are [`.split`], [`.splitn`], +//! [`.chunks`], [`.windows`] and more. +//! +//! [`Hash`]: core::hash::Hash +//! [`.iter`]: slice::iter +//! [`.iter_mut`]: slice::iter_mut +//! [`.split`]: slice::split +//! [`.splitn`]: slice::splitn +//! [`.chunks`]: slice::chunks +//! [`.windows`]: slice::windows +#![stable(feature = "rust1", since = "1.0.0")] +// Many of the usings in this module are only used in the test configuration. +// It's cleaner to just turn off the unused_imports warning than to fix them. +#![cfg_attr(test, allow(unused_imports, dead_code))] + +use core::borrow::{Borrow, BorrowMut}; +#[cfg(not(no_global_oom_handling))] +use core::cmp::Ordering::{self, Less}; +#[cfg(not(no_global_oom_handling))] +use core::mem; +#[cfg(not(no_global_oom_handling))] +use core::mem::size_of; +#[cfg(not(no_global_oom_handling))] +use core::ptr; + +use crate::alloc::Allocator; +#[cfg(not(no_global_oom_handling))] +use crate::alloc::Global; +#[cfg(not(no_global_oom_handling))] +use crate::borrow::ToOwned; +use crate::boxed::Box; +use crate::vec::Vec; + +#[unstable(feature = "slice_range", issue = "76393")] +pub use core::slice::range; +#[unstable(feature = "array_chunks", issue = "74985")] +pub use core::slice::ArrayChunks; +#[unstable(feature = "array_chunks", issue = "74985")] +pub use core::slice::ArrayChunksMut; +#[unstable(feature = "array_windows", issue = "75027")] +pub use core::slice::ArrayWindows; +#[stable(feature = "inherent_ascii_escape", since = "1.60.0")] +pub use core::slice::EscapeAscii; +#[stable(feature = "slice_get_slice", since = "1.28.0")] +pub use core::slice::SliceIndex; +#[stable(feature = "from_ref", since = "1.28.0")] +pub use core::slice::{from_mut, from_ref}; +#[stable(feature = "rust1", since = "1.0.0")] +pub use core::slice::{from_raw_parts, from_raw_parts_mut}; +#[stable(feature = "rust1", since = "1.0.0")] +pub use core::slice::{Chunks, Windows}; +#[stable(feature = "chunks_exact", since = "1.31.0")] +pub use core::slice::{ChunksExact, ChunksExactMut}; +#[stable(feature = "rust1", since = "1.0.0")] +pub use core::slice::{ChunksMut, Split, SplitMut}; +#[unstable(feature = "slice_group_by", issue = "80552")] +pub use core::slice::{GroupBy, GroupByMut}; +#[stable(feature = "rust1", since = "1.0.0")] +pub use core::slice::{Iter, IterMut}; +#[stable(feature = "rchunks", since = "1.31.0")] +pub use core::slice::{RChunks, RChunksExact, RChunksExactMut, RChunksMut}; +#[stable(feature = "slice_rsplit", since = "1.27.0")] +pub use core::slice::{RSplit, RSplitMut}; +#[stable(feature = "rust1", since = "1.0.0")] +pub use core::slice::{RSplitN, RSplitNMut, SplitN, SplitNMut}; +#[stable(feature = "split_inclusive", since = "1.51.0")] +pub use core::slice::{SplitInclusive, SplitInclusiveMut}; + +//////////////////////////////////////////////////////////////////////////////// +// Basic slice extension methods +//////////////////////////////////////////////////////////////////////////////// + +// HACK(japaric) needed for the implementation of `vec!` macro during testing +// N.B., see the `hack` module in this file for more details. +#[cfg(test)] +pub use hack::into_vec; + +// HACK(japaric) needed for the implementation of `Vec::clone` during testing +// N.B., see the `hack` module in this file for more details. +#[cfg(test)] +pub use hack::to_vec; + +// HACK(japaric): With cfg(test) `impl [T]` is not available, these three +// functions are actually methods that are in `impl [T]` but not in +// `core::slice::SliceExt` - we need to supply these functions for the +// `test_permutations` test +pub(crate) mod hack { + use core::alloc::Allocator; + + use crate::boxed::Box; + use crate::vec::Vec; + + // We shouldn't add inline attribute to this since this is used in + // `vec!` macro mostly and causes perf regression. See #71204 for + // discussion and perf results. + pub fn into_vec(b: Box<[T], A>) -> Vec { + unsafe { + let len = b.len(); + let (b, alloc) = Box::into_raw_with_allocator(b); + Vec::from_raw_parts_in(b as *mut T, len, len, alloc) + } + } + + #[cfg(not(no_global_oom_handling))] + #[inline] + pub fn to_vec(s: &[T], alloc: A) -> Vec { + T::to_vec(s, alloc) + } + + #[cfg(not(no_global_oom_handling))] + pub trait ConvertVec { + fn to_vec(s: &[Self], alloc: A) -> Vec + where + Self: Sized; + } + + #[cfg(not(no_global_oom_handling))] + impl ConvertVec for T { + #[inline] + default fn to_vec(s: &[Self], alloc: A) -> Vec { + struct DropGuard<'a, T, A: Allocator> { + vec: &'a mut Vec, + num_init: usize, + } + impl<'a, T, A: Allocator> Drop for DropGuard<'a, T, A> { + #[inline] + fn drop(&mut self) { + // SAFETY: + // items were marked initialized in the loop below + unsafe { + self.vec.set_len(self.num_init); + } + } + } + let mut vec = Vec::with_capacity_in(s.len(), alloc); + let mut guard = DropGuard { vec: &mut vec, num_init: 0 }; + let slots = guard.vec.spare_capacity_mut(); + // .take(slots.len()) is necessary for LLVM to remove bounds checks + // and has better codegen than zip. + for (i, b) in s.iter().enumerate().take(slots.len()) { + guard.num_init = i; + slots[i].write(b.clone()); + } + core::mem::forget(guard); + // SAFETY: + // the vec was allocated and initialized above to at least this length. + unsafe { + vec.set_len(s.len()); + } + vec + } + } + + #[cfg(not(no_global_oom_handling))] + impl ConvertVec for T { + #[inline] + fn to_vec(s: &[Self], alloc: A) -> Vec { + let mut v = Vec::with_capacity_in(s.len(), alloc); + // SAFETY: + // allocated above with the capacity of `s`, and initialize to `s.len()` in + // ptr::copy_to_non_overlapping below. + unsafe { + s.as_ptr().copy_to_nonoverlapping(v.as_mut_ptr(), s.len()); + v.set_len(s.len()); + } + v + } + } +} + +#[cfg(not(test))] +impl [T] { + /// Sorts the slice. + /// + /// This sort is stable (i.e., does not reorder equal elements) and *O*(*n* \* log(*n*)) worst-case. + /// + /// When applicable, unstable sorting is preferred because it is generally faster than stable + /// sorting and it doesn't allocate auxiliary memory. + /// See [`sort_unstable`](slice::sort_unstable). + /// + /// # Current implementation + /// + /// The current algorithm is an adaptive, iterative merge sort inspired by + /// [timsort](https://en.wikipedia.org/wiki/Timsort). + /// It is designed to be very fast in cases where the slice is nearly sorted, or consists of + /// two or more sorted sequences concatenated one after another. + /// + /// Also, it allocates temporary storage half the size of `self`, but for short slices a + /// non-allocating insertion sort is used instead. + /// + /// # Examples + /// + /// ``` + /// let mut v = [-5, 4, 1, -3, 2]; + /// + /// v.sort(); + /// assert!(v == [-5, -3, 1, 2, 4]); + /// ``` + #[cfg(not(no_global_oom_handling))] + #[rustc_allow_incoherent_impl] + #[stable(feature = "rust1", since = "1.0.0")] + #[inline] + pub fn sort(&mut self) + where + T: Ord, + { + merge_sort(self, |a, b| a.lt(b)); + } + + /// Sorts the slice with a comparator function. + /// + /// This sort is stable (i.e., does not reorder equal elements) and *O*(*n* \* log(*n*)) worst-case. + /// + /// The comparator function must define a total ordering for the elements in the slice. If + /// the ordering is not total, the order of the elements is unspecified. An order is a + /// total order if it is (for all `a`, `b` and `c`): + /// + /// * total and antisymmetric: exactly one of `a < b`, `a == b` or `a > b` is true, and + /// * transitive, `a < b` and `b < c` implies `a < c`. The same must hold for both `==` and `>`. + /// + /// For example, while [`f64`] doesn't implement [`Ord`] because `NaN != NaN`, we can use + /// `partial_cmp` as our sort function when we know the slice doesn't contain a `NaN`. + /// + /// ``` + /// let mut floats = [5f64, 4.0, 1.0, 3.0, 2.0]; + /// floats.sort_by(|a, b| a.partial_cmp(b).unwrap()); + /// assert_eq!(floats, [1.0, 2.0, 3.0, 4.0, 5.0]); + /// ``` + /// + /// When applicable, unstable sorting is preferred because it is generally faster than stable + /// sorting and it doesn't allocate auxiliary memory. + /// See [`sort_unstable_by`](slice::sort_unstable_by). + /// + /// # Current implementation + /// + /// The current algorithm is an adaptive, iterative merge sort inspired by + /// [timsort](https://en.wikipedia.org/wiki/Timsort). + /// It is designed to be very fast in cases where the slice is nearly sorted, or consists of + /// two or more sorted sequences concatenated one after another. + /// + /// Also, it allocates temporary storage half the size of `self`, but for short slices a + /// non-allocating insertion sort is used instead. + /// + /// # Examples + /// + /// ``` + /// let mut v = [5, 4, 1, 3, 2]; + /// v.sort_by(|a, b| a.cmp(b)); + /// assert!(v == [1, 2, 3, 4, 5]); + /// + /// // reverse sorting + /// v.sort_by(|a, b| b.cmp(a)); + /// assert!(v == [5, 4, 3, 2, 1]); + /// ``` + #[cfg(not(no_global_oom_handling))] + #[rustc_allow_incoherent_impl] + #[stable(feature = "rust1", since = "1.0.0")] + #[inline] + pub fn sort_by(&mut self, mut compare: F) + where + F: FnMut(&T, &T) -> Ordering, + { + merge_sort(self, |a, b| compare(a, b) == Less); + } + + /// Sorts the slice with a key extraction function. + /// + /// This sort is stable (i.e., does not reorder equal elements) and *O*(*m* \* *n* \* log(*n*)) + /// worst-case, where the key function is *O*(*m*). + /// + /// For expensive key functions (e.g. functions that are not simple property accesses or + /// basic operations), [`sort_by_cached_key`](slice::sort_by_cached_key) is likely to be + /// significantly faster, as it does not recompute element keys. + /// + /// When applicable, unstable sorting is preferred because it is generally faster than stable + /// sorting and it doesn't allocate auxiliary memory. + /// See [`sort_unstable_by_key`](slice::sort_unstable_by_key). + /// + /// # Current implementation + /// + /// The current algorithm is an adaptive, iterative merge sort inspired by + /// [timsort](https://en.wikipedia.org/wiki/Timsort). + /// It is designed to be very fast in cases where the slice is nearly sorted, or consists of + /// two or more sorted sequences concatenated one after another. + /// + /// Also, it allocates temporary storage half the size of `self`, but for short slices a + /// non-allocating insertion sort is used instead. + /// + /// # Examples + /// + /// ``` + /// let mut v = [-5i32, 4, 1, -3, 2]; + /// + /// v.sort_by_key(|k| k.abs()); + /// assert!(v == [1, 2, -3, 4, -5]); + /// ``` + #[cfg(not(no_global_oom_handling))] + #[rustc_allow_incoherent_impl] + #[stable(feature = "slice_sort_by_key", since = "1.7.0")] + #[inline] + pub fn sort_by_key(&mut self, mut f: F) + where + F: FnMut(&T) -> K, + K: Ord, + { + merge_sort(self, |a, b| f(a).lt(&f(b))); + } + + /// Sorts the slice with a key extraction function. + /// + /// During sorting, the key function is called at most once per element, by using + /// temporary storage to remember the results of key evaluation. + /// The order of calls to the key function is unspecified and may change in future versions + /// of the standard library. + /// + /// This sort is stable (i.e., does not reorder equal elements) and *O*(*m* \* *n* + *n* \* log(*n*)) + /// worst-case, where the key function is *O*(*m*). + /// + /// For simple key functions (e.g., functions that are property accesses or + /// basic operations), [`sort_by_key`](slice::sort_by_key) is likely to be + /// faster. + /// + /// # Current implementation + /// + /// The current algorithm is based on [pattern-defeating quicksort][pdqsort] by Orson Peters, + /// which combines the fast average case of randomized quicksort with the fast worst case of + /// heapsort, while achieving linear time on slices with certain patterns. It uses some + /// randomization to avoid degenerate cases, but with a fixed seed to always provide + /// deterministic behavior. + /// + /// In the worst case, the algorithm allocates temporary storage in a `Vec<(K, usize)>` the + /// length of the slice. + /// + /// # Examples + /// + /// ``` + /// let mut v = [-5i32, 4, 32, -3, 2]; + /// + /// v.sort_by_cached_key(|k| k.to_string()); + /// assert!(v == [-3, -5, 2, 32, 4]); + /// ``` + /// + /// [pdqsort]: https://github.com/orlp/pdqsort + #[cfg(not(no_global_oom_handling))] + #[rustc_allow_incoherent_impl] + #[stable(feature = "slice_sort_by_cached_key", since = "1.34.0")] + #[inline] + pub fn sort_by_cached_key(&mut self, f: F) + where + F: FnMut(&T) -> K, + K: Ord, + { + // Helper macro for indexing our vector by the smallest possible type, to reduce allocation. + macro_rules! sort_by_key { + ($t:ty, $slice:ident, $f:ident) => {{ + let mut indices: Vec<_> = + $slice.iter().map($f).enumerate().map(|(i, k)| (k, i as $t)).collect(); + // The elements of `indices` are unique, as they are indexed, so any sort will be + // stable with respect to the original slice. We use `sort_unstable` here because + // it requires less memory allocation. + indices.sort_unstable(); + for i in 0..$slice.len() { + let mut index = indices[i].1; + while (index as usize) < i { + index = indices[index as usize].1; + } + indices[i].1 = index; + $slice.swap(i, index as usize); + } + }}; + } + + let sz_u8 = mem::size_of::<(K, u8)>(); + let sz_u16 = mem::size_of::<(K, u16)>(); + let sz_u32 = mem::size_of::<(K, u32)>(); + let sz_usize = mem::size_of::<(K, usize)>(); + + let len = self.len(); + if len < 2 { + return; + } + if sz_u8 < sz_u16 && len <= (u8::MAX as usize) { + return sort_by_key!(u8, self, f); + } + if sz_u16 < sz_u32 && len <= (u16::MAX as usize) { + return sort_by_key!(u16, self, f); + } + if sz_u32 < sz_usize && len <= (u32::MAX as usize) { + return sort_by_key!(u32, self, f); + } + sort_by_key!(usize, self, f) + } + + /// Copies `self` into a new `Vec`. + /// + /// # Examples + /// + /// ``` + /// let s = [10, 40, 30]; + /// let x = s.to_vec(); + /// // Here, `s` and `x` can be modified independently. + /// ``` + #[cfg(not(no_global_oom_handling))] + #[rustc_allow_incoherent_impl] + #[rustc_conversion_suggestion] + #[stable(feature = "rust1", since = "1.0.0")] + #[inline] + pub fn to_vec(&self) -> Vec + where + T: Clone, + { + self.to_vec_in(Global) + } + + /// Copies `self` into a new `Vec` with an allocator. + /// + /// # Examples + /// + /// ``` + /// #![feature(allocator_api)] + /// + /// use std::alloc::System; + /// + /// let s = [10, 40, 30]; + /// let x = s.to_vec_in(System); + /// // Here, `s` and `x` can be modified independently. + /// ``` + #[cfg(not(no_global_oom_handling))] + #[rustc_allow_incoherent_impl] + #[inline] + #[unstable(feature = "allocator_api", issue = "32838")] + pub fn to_vec_in(&self, alloc: A) -> Vec + where + T: Clone, + { + // N.B., see the `hack` module in this file for more details. + hack::to_vec(self, alloc) + } + + /// Converts `self` into a vector without clones or allocation. + /// + /// The resulting vector can be converted back into a box via + /// `Vec`'s `into_boxed_slice` method. + /// + /// # Examples + /// + /// ``` + /// let s: Box<[i32]> = Box::new([10, 40, 30]); + /// let x = s.into_vec(); + /// // `s` cannot be used anymore because it has been converted into `x`. + /// + /// assert_eq!(x, vec![10, 40, 30]); + /// ``` + #[rustc_allow_incoherent_impl] + #[stable(feature = "rust1", since = "1.0.0")] + #[inline] + pub fn into_vec(self: Box) -> Vec { + // N.B., see the `hack` module in this file for more details. + hack::into_vec(self) + } + + /// Creates a vector by repeating a slice `n` times. + /// + /// # Panics + /// + /// This function will panic if the capacity would overflow. + /// + /// # Examples + /// + /// Basic usage: + /// + /// ``` + /// assert_eq!([1, 2].repeat(3), vec![1, 2, 1, 2, 1, 2]); + /// ``` + /// + /// A panic upon overflow: + /// + /// ```should_panic + /// // this will panic at runtime + /// b"0123456789abcdef".repeat(usize::MAX); + /// ``` + #[rustc_allow_incoherent_impl] + #[cfg(not(no_global_oom_handling))] + #[stable(feature = "repeat_generic_slice", since = "1.40.0")] + pub fn repeat(&self, n: usize) -> Vec + where + T: Copy, + { + if n == 0 { + return Vec::new(); + } + + // If `n` is larger than zero, it can be split as + // `n = 2^expn + rem (2^expn > rem, expn >= 0, rem >= 0)`. + // `2^expn` is the number represented by the leftmost '1' bit of `n`, + // and `rem` is the remaining part of `n`. + + // Using `Vec` to access `set_len()`. + let capacity = self.len().checked_mul(n).expect("capacity overflow"); + let mut buf = Vec::with_capacity(capacity); + + // `2^expn` repetition is done by doubling `buf` `expn`-times. + buf.extend(self); + { + let mut m = n >> 1; + // If `m > 0`, there are remaining bits up to the leftmost '1'. + while m > 0 { + // `buf.extend(buf)`: + unsafe { + ptr::copy_nonoverlapping( + buf.as_ptr(), + (buf.as_mut_ptr() as *mut T).add(buf.len()), + buf.len(), + ); + // `buf` has capacity of `self.len() * n`. + let buf_len = buf.len(); + buf.set_len(buf_len * 2); + } + + m >>= 1; + } + } + + // `rem` (`= n - 2^expn`) repetition is done by copying + // first `rem` repetitions from `buf` itself. + let rem_len = capacity - buf.len(); // `self.len() * rem` + if rem_len > 0 { + // `buf.extend(buf[0 .. rem_len])`: + unsafe { + // This is non-overlapping since `2^expn > rem`. + ptr::copy_nonoverlapping( + buf.as_ptr(), + (buf.as_mut_ptr() as *mut T).add(buf.len()), + rem_len, + ); + // `buf.len() + rem_len` equals to `buf.capacity()` (`= self.len() * n`). + buf.set_len(capacity); + } + } + buf + } + + /// Flattens a slice of `T` into a single value `Self::Output`. + /// + /// # Examples + /// + /// ``` + /// assert_eq!(["hello", "world"].concat(), "helloworld"); + /// assert_eq!([[1, 2], [3, 4]].concat(), [1, 2, 3, 4]); + /// ``` + #[rustc_allow_incoherent_impl] + #[stable(feature = "rust1", since = "1.0.0")] + pub fn concat(&self) -> >::Output + where + Self: Concat, + { + Concat::concat(self) + } + + /// Flattens a slice of `T` into a single value `Self::Output`, placing a + /// given separator between each. + /// + /// # Examples + /// + /// ``` + /// assert_eq!(["hello", "world"].join(" "), "hello world"); + /// assert_eq!([[1, 2], [3, 4]].join(&0), [1, 2, 0, 3, 4]); + /// assert_eq!([[1, 2], [3, 4]].join(&[0, 0][..]), [1, 2, 0, 0, 3, 4]); + /// ``` + #[rustc_allow_incoherent_impl] + #[stable(feature = "rename_connect_to_join", since = "1.3.0")] + pub fn join(&self, sep: Separator) -> >::Output + where + Self: Join, + { + Join::join(self, sep) + } + + /// Flattens a slice of `T` into a single value `Self::Output`, placing a + /// given separator between each. + /// + /// # Examples + /// + /// ``` + /// # #![allow(deprecated)] + /// assert_eq!(["hello", "world"].connect(" "), "hello world"); + /// assert_eq!([[1, 2], [3, 4]].connect(&0), [1, 2, 0, 3, 4]); + /// ``` + #[rustc_allow_incoherent_impl] + #[stable(feature = "rust1", since = "1.0.0")] + #[deprecated(since = "1.3.0", note = "renamed to join")] + pub fn connect(&self, sep: Separator) -> >::Output + where + Self: Join, + { + Join::join(self, sep) + } +} + +#[cfg(not(test))] +impl [u8] { + /// Returns a vector containing a copy of this slice where each byte + /// is mapped to its ASCII upper case equivalent. + /// + /// ASCII letters 'a' to 'z' are mapped to 'A' to 'Z', + /// but non-ASCII letters are unchanged. + /// + /// To uppercase the value in-place, use [`make_ascii_uppercase`]. + /// + /// [`make_ascii_uppercase`]: slice::make_ascii_uppercase + #[cfg(not(no_global_oom_handling))] + #[rustc_allow_incoherent_impl] + #[must_use = "this returns the uppercase bytes as a new Vec, \ + without modifying the original"] + #[stable(feature = "ascii_methods_on_intrinsics", since = "1.23.0")] + #[inline] + pub fn to_ascii_uppercase(&self) -> Vec { + let mut me = self.to_vec(); + me.make_ascii_uppercase(); + me + } + + /// Returns a vector containing a copy of this slice where each byte + /// is mapped to its ASCII lower case equivalent. + /// + /// ASCII letters 'A' to 'Z' are mapped to 'a' to 'z', + /// but non-ASCII letters are unchanged. + /// + /// To lowercase the value in-place, use [`make_ascii_lowercase`]. + /// + /// [`make_ascii_lowercase`]: slice::make_ascii_lowercase + #[cfg(not(no_global_oom_handling))] + #[rustc_allow_incoherent_impl] + #[must_use = "this returns the lowercase bytes as a new Vec, \ + without modifying the original"] + #[stable(feature = "ascii_methods_on_intrinsics", since = "1.23.0")] + #[inline] + pub fn to_ascii_lowercase(&self) -> Vec { + let mut me = self.to_vec(); + me.make_ascii_lowercase(); + me + } +} + +//////////////////////////////////////////////////////////////////////////////// +// Extension traits for slices over specific kinds of data +//////////////////////////////////////////////////////////////////////////////// + +/// Helper trait for [`[T]::concat`](slice::concat). +/// +/// Note: the `Item` type parameter is not used in this trait, +/// but it allows impls to be more generic. +/// Without it, we get this error: +/// +/// ```error +/// error[E0207]: the type parameter `T` is not constrained by the impl trait, self type, or predica +/// --> src/liballoc/slice.rs:608:6 +/// | +/// 608 | impl> Concat for [V] { +/// | ^ unconstrained type parameter +/// ``` +/// +/// This is because there could exist `V` types with multiple `Borrow<[_]>` impls, +/// such that multiple `T` types would apply: +/// +/// ``` +/// # #[allow(dead_code)] +/// pub struct Foo(Vec, Vec); +/// +/// impl std::borrow::Borrow<[u32]> for Foo { +/// fn borrow(&self) -> &[u32] { &self.0 } +/// } +/// +/// impl std::borrow::Borrow<[String]> for Foo { +/// fn borrow(&self) -> &[String] { &self.1 } +/// } +/// ``` +#[unstable(feature = "slice_concat_trait", issue = "27747")] +pub trait Concat { + #[unstable(feature = "slice_concat_trait", issue = "27747")] + /// The resulting type after concatenation + type Output; + + /// Implementation of [`[T]::concat`](slice::concat) + #[unstable(feature = "slice_concat_trait", issue = "27747")] + fn concat(slice: &Self) -> Self::Output; +} + +/// Helper trait for [`[T]::join`](slice::join) +#[unstable(feature = "slice_concat_trait", issue = "27747")] +pub trait Join { + #[unstable(feature = "slice_concat_trait", issue = "27747")] + /// The resulting type after concatenation + type Output; + + /// Implementation of [`[T]::join`](slice::join) + #[unstable(feature = "slice_concat_trait", issue = "27747")] + fn join(slice: &Self, sep: Separator) -> Self::Output; +} + +#[cfg(not(no_global_oom_handling))] +#[unstable(feature = "slice_concat_ext", issue = "27747")] +impl> Concat for [V] { + type Output = Vec; + + fn concat(slice: &Self) -> Vec { + let size = slice.iter().map(|slice| slice.borrow().len()).sum(); + let mut result = Vec::with_capacity(size); + for v in slice { + result.extend_from_slice(v.borrow()) + } + result + } +} + +#[cfg(not(no_global_oom_handling))] +#[unstable(feature = "slice_concat_ext", issue = "27747")] +impl> Join<&T> for [V] { + type Output = Vec; + + fn join(slice: &Self, sep: &T) -> Vec { + let mut iter = slice.iter(); + let first = match iter.next() { + Some(first) => first, + None => return vec![], + }; + let size = slice.iter().map(|v| v.borrow().len()).sum::() + slice.len() - 1; + let mut result = Vec::with_capacity(size); + result.extend_from_slice(first.borrow()); + + for v in iter { + result.push(sep.clone()); + result.extend_from_slice(v.borrow()) + } + result + } +} + +#[cfg(not(no_global_oom_handling))] +#[unstable(feature = "slice_concat_ext", issue = "27747")] +impl> Join<&[T]> for [V] { + type Output = Vec; + + fn join(slice: &Self, sep: &[T]) -> Vec { + let mut iter = slice.iter(); + let first = match iter.next() { + Some(first) => first, + None => return vec![], + }; + let size = + slice.iter().map(|v| v.borrow().len()).sum::() + sep.len() * (slice.len() - 1); + let mut result = Vec::with_capacity(size); + result.extend_from_slice(first.borrow()); + + for v in iter { + result.extend_from_slice(sep); + result.extend_from_slice(v.borrow()) + } + result + } +} + +//////////////////////////////////////////////////////////////////////////////// +// Standard trait implementations for slices +//////////////////////////////////////////////////////////////////////////////// + +#[stable(feature = "rust1", since = "1.0.0")] +impl Borrow<[T]> for Vec { + fn borrow(&self) -> &[T] { + &self[..] + } +} + +#[stable(feature = "rust1", since = "1.0.0")] +impl BorrowMut<[T]> for Vec { + fn borrow_mut(&mut self) -> &mut [T] { + &mut self[..] + } +} + +#[cfg(not(no_global_oom_handling))] +#[stable(feature = "rust1", since = "1.0.0")] +impl ToOwned for [T] { + type Owned = Vec; + #[cfg(not(test))] + fn to_owned(&self) -> Vec { + self.to_vec() + } + + #[cfg(test)] + fn to_owned(&self) -> Vec { + hack::to_vec(self, Global) + } + + fn clone_into(&self, target: &mut Vec) { + // drop anything in target that will not be overwritten + target.truncate(self.len()); + + // target.len <= self.len due to the truncate above, so the + // slices here are always in-bounds. + let (init, tail) = self.split_at(target.len()); + + // reuse the contained values' allocations/resources. + target.clone_from_slice(init); + target.extend_from_slice(tail); + } +} + +//////////////////////////////////////////////////////////////////////////////// +// Sorting +//////////////////////////////////////////////////////////////////////////////// + +/// Inserts `v[0]` into pre-sorted sequence `v[1..]` so that whole `v[..]` becomes sorted. +/// +/// This is the integral subroutine of insertion sort. +#[cfg(not(no_global_oom_handling))] +fn insert_head(v: &mut [T], is_less: &mut F) +where + F: FnMut(&T, &T) -> bool, +{ + if v.len() >= 2 && is_less(&v[1], &v[0]) { + unsafe { + // There are three ways to implement insertion here: + // + // 1. Swap adjacent elements until the first one gets to its final destination. + // However, this way we copy data around more than is necessary. If elements are big + // structures (costly to copy), this method will be slow. + // + // 2. Iterate until the right place for the first element is found. Then shift the + // elements succeeding it to make room for it and finally place it into the + // remaining hole. This is a good method. + // + // 3. Copy the first element into a temporary variable. Iterate until the right place + // for it is found. As we go along, copy every traversed element into the slot + // preceding it. Finally, copy data from the temporary variable into the remaining + // hole. This method is very good. Benchmarks demonstrated slightly better + // performance than with the 2nd method. + // + // All methods were benchmarked, and the 3rd showed best results. So we chose that one. + let tmp = mem::ManuallyDrop::new(ptr::read(&v[0])); + + // Intermediate state of the insertion process is always tracked by `hole`, which + // serves two purposes: + // 1. Protects integrity of `v` from panics in `is_less`. + // 2. Fills the remaining hole in `v` in the end. + // + // Panic safety: + // + // If `is_less` panics at any point during the process, `hole` will get dropped and + // fill the hole in `v` with `tmp`, thus ensuring that `v` still holds every object it + // initially held exactly once. + let mut hole = InsertionHole { src: &*tmp, dest: &mut v[1] }; + ptr::copy_nonoverlapping(&v[1], &mut v[0], 1); + + for i in 2..v.len() { + if !is_less(&v[i], &*tmp) { + break; + } + ptr::copy_nonoverlapping(&v[i], &mut v[i - 1], 1); + hole.dest = &mut v[i]; + } + // `hole` gets dropped and thus copies `tmp` into the remaining hole in `v`. + } + } + + // When dropped, copies from `src` into `dest`. + struct InsertionHole { + src: *const T, + dest: *mut T, + } + + impl Drop for InsertionHole { + fn drop(&mut self) { + unsafe { + ptr::copy_nonoverlapping(self.src, self.dest, 1); + } + } + } +} + +/// Merges non-decreasing runs `v[..mid]` and `v[mid..]` using `buf` as temporary storage, and +/// stores the result into `v[..]`. +/// +/// # Safety +/// +/// The two slices must be non-empty and `mid` must be in bounds. Buffer `buf` must be long enough +/// to hold a copy of the shorter slice. Also, `T` must not be a zero-sized type. +#[cfg(not(no_global_oom_handling))] +unsafe fn merge(v: &mut [T], mid: usize, buf: *mut T, is_less: &mut F) +where + F: FnMut(&T, &T) -> bool, +{ + let len = v.len(); + let v = v.as_mut_ptr(); + let (v_mid, v_end) = unsafe { (v.add(mid), v.add(len)) }; + + // The merge process first copies the shorter run into `buf`. Then it traces the newly copied + // run and the longer run forwards (or backwards), comparing their next unconsumed elements and + // copying the lesser (or greater) one into `v`. + // + // As soon as the shorter run is fully consumed, the process is done. If the longer run gets + // consumed first, then we must copy whatever is left of the shorter run into the remaining + // hole in `v`. + // + // Intermediate state of the process is always tracked by `hole`, which serves two purposes: + // 1. Protects integrity of `v` from panics in `is_less`. + // 2. Fills the remaining hole in `v` if the longer run gets consumed first. + // + // Panic safety: + // + // If `is_less` panics at any point during the process, `hole` will get dropped and fill the + // hole in `v` with the unconsumed range in `buf`, thus ensuring that `v` still holds every + // object it initially held exactly once. + let mut hole; + + if mid <= len - mid { + // The left run is shorter. + unsafe { + ptr::copy_nonoverlapping(v, buf, mid); + hole = MergeHole { start: buf, end: buf.add(mid), dest: v }; + } + + // Initially, these pointers point to the beginnings of their arrays. + let left = &mut hole.start; + let mut right = v_mid; + let out = &mut hole.dest; + + while *left < hole.end && right < v_end { + // Consume the lesser side. + // If equal, prefer the left run to maintain stability. + unsafe { + let to_copy = if is_less(&*right, &**left) { + get_and_increment(&mut right) + } else { + get_and_increment(left) + }; + ptr::copy_nonoverlapping(to_copy, get_and_increment(out), 1); + } + } + } else { + // The right run is shorter. + unsafe { + ptr::copy_nonoverlapping(v_mid, buf, len - mid); + hole = MergeHole { start: buf, end: buf.add(len - mid), dest: v_mid }; + } + + // Initially, these pointers point past the ends of their arrays. + let left = &mut hole.dest; + let right = &mut hole.end; + let mut out = v_end; + + while v < *left && buf < *right { + // Consume the greater side. + // If equal, prefer the right run to maintain stability. + unsafe { + let to_copy = if is_less(&*right.offset(-1), &*left.offset(-1)) { + decrement_and_get(left) + } else { + decrement_and_get(right) + }; + ptr::copy_nonoverlapping(to_copy, decrement_and_get(&mut out), 1); + } + } + } + // Finally, `hole` gets dropped. If the shorter run was not fully consumed, whatever remains of + // it will now be copied into the hole in `v`. + + unsafe fn get_and_increment(ptr: &mut *mut T) -> *mut T { + let old = *ptr; + *ptr = unsafe { ptr.offset(1) }; + old + } + + unsafe fn decrement_and_get(ptr: &mut *mut T) -> *mut T { + *ptr = unsafe { ptr.offset(-1) }; + *ptr + } + + // When dropped, copies the range `start..end` into `dest..`. + struct MergeHole { + start: *mut T, + end: *mut T, + dest: *mut T, + } + + impl Drop for MergeHole { + fn drop(&mut self) { + // `T` is not a zero-sized type, and these are pointers into a slice's elements. + unsafe { + let len = self.end.sub_ptr(self.start); + ptr::copy_nonoverlapping(self.start, self.dest, len); + } + } + } +} + +/// This merge sort borrows some (but not all) ideas from TimSort, which is described in detail +/// [here](https://github.com/python/cpython/blob/main/Objects/listsort.txt). +/// +/// The algorithm identifies strictly descending and non-descending subsequences, which are called +/// natural runs. There is a stack of pending runs yet to be merged. Each newly found run is pushed +/// onto the stack, and then some pairs of adjacent runs are merged until these two invariants are +/// satisfied: +/// +/// 1. for every `i` in `1..runs.len()`: `runs[i - 1].len > runs[i].len` +/// 2. for every `i` in `2..runs.len()`: `runs[i - 2].len > runs[i - 1].len + runs[i].len` +/// +/// The invariants ensure that the total running time is *O*(*n* \* log(*n*)) worst-case. +#[cfg(not(no_global_oom_handling))] +fn merge_sort(v: &mut [T], mut is_less: F) +where + F: FnMut(&T, &T) -> bool, +{ + // Slices of up to this length get sorted using insertion sort. + const MAX_INSERTION: usize = 20; + // Very short runs are extended using insertion sort to span at least this many elements. + const MIN_RUN: usize = 10; + + // Sorting has no meaningful behavior on zero-sized types. + if size_of::() == 0 { + return; + } + + let len = v.len(); + + // Short arrays get sorted in-place via insertion sort to avoid allocations. + if len <= MAX_INSERTION { + if len >= 2 { + for i in (0..len - 1).rev() { + insert_head(&mut v[i..], &mut is_less); + } + } + return; + } + + // Allocate a buffer to use as scratch memory. We keep the length 0 so we can keep in it + // shallow copies of the contents of `v` without risking the dtors running on copies if + // `is_less` panics. When merging two sorted runs, this buffer holds a copy of the shorter run, + // which will always have length at most `len / 2`. + let mut buf = Vec::with_capacity(len / 2); + + // In order to identify natural runs in `v`, we traverse it backwards. That might seem like a + // strange decision, but consider the fact that merges more often go in the opposite direction + // (forwards). According to benchmarks, merging forwards is slightly faster than merging + // backwards. To conclude, identifying runs by traversing backwards improves performance. + let mut runs = vec![]; + let mut end = len; + while end > 0 { + // Find the next natural run, and reverse it if it's strictly descending. + let mut start = end - 1; + if start > 0 { + start -= 1; + unsafe { + if is_less(v.get_unchecked(start + 1), v.get_unchecked(start)) { + while start > 0 && is_less(v.get_unchecked(start), v.get_unchecked(start - 1)) { + start -= 1; + } + v[start..end].reverse(); + } else { + while start > 0 && !is_less(v.get_unchecked(start), v.get_unchecked(start - 1)) + { + start -= 1; + } + } + } + } + + // Insert some more elements into the run if it's too short. Insertion sort is faster than + // merge sort on short sequences, so this significantly improves performance. + while start > 0 && end - start < MIN_RUN { + start -= 1; + insert_head(&mut v[start..end], &mut is_less); + } + + // Push this run onto the stack. + runs.push(Run { start, len: end - start }); + end = start; + + // Merge some pairs of adjacent runs to satisfy the invariants. + while let Some(r) = collapse(&runs) { + let left = runs[r + 1]; + let right = runs[r]; + unsafe { + merge( + &mut v[left.start..right.start + right.len], + left.len, + buf.as_mut_ptr(), + &mut is_less, + ); + } + runs[r] = Run { start: left.start, len: left.len + right.len }; + runs.remove(r + 1); + } + } + + // Finally, exactly one run must remain in the stack. + debug_assert!(runs.len() == 1 && runs[0].start == 0 && runs[0].len == len); + + // Examines the stack of runs and identifies the next pair of runs to merge. More specifically, + // if `Some(r)` is returned, that means `runs[r]` and `runs[r + 1]` must be merged next. If the + // algorithm should continue building a new run instead, `None` is returned. + // + // TimSort is infamous for its buggy implementations, as described here: + // http://envisage-project.eu/timsort-specification-and-verification/ + // + // The gist of the story is: we must enforce the invariants on the top four runs on the stack. + // Enforcing them on just top three is not sufficient to ensure that the invariants will still + // hold for *all* runs in the stack. + // + // This function correctly checks invariants for the top four runs. Additionally, if the top + // run starts at index 0, it will always demand a merge operation until the stack is fully + // collapsed, in order to complete the sort. + #[inline] + fn collapse(runs: &[Run]) -> Option { + let n = runs.len(); + if n >= 2 + && (runs[n - 1].start == 0 + || runs[n - 2].len <= runs[n - 1].len + || (n >= 3 && runs[n - 3].len <= runs[n - 2].len + runs[n - 1].len) + || (n >= 4 && runs[n - 4].len <= runs[n - 3].len + runs[n - 2].len)) + { + if n >= 3 && runs[n - 3].len < runs[n - 1].len { Some(n - 3) } else { Some(n - 2) } + } else { + None + } + } + + #[derive(Clone, Copy)] + struct Run { + start: usize, + len: usize, + } +} diff --git a/rust/alloc/vec/drain.rs b/rust/alloc/vec/drain.rs new file mode 100644 index 000000000..b6a5f98e4 --- /dev/null +++ b/rust/alloc/vec/drain.rs @@ -0,0 +1,186 @@ +// SPDX-License-Identifier: Apache-2.0 OR MIT + +use crate::alloc::{Allocator, Global}; +use core::fmt; +use core::iter::{FusedIterator, TrustedLen}; +use core::mem; +use core::ptr::{self, NonNull}; +use core::slice::{self}; + +use super::Vec; + +/// A draining iterator for `Vec`. +/// +/// This `struct` is created by [`Vec::drain`]. +/// See its documentation for more. +/// +/// # Example +/// +/// ``` +/// let mut v = vec![0, 1, 2]; +/// let iter: std::vec::Drain<_> = v.drain(..); +/// ``` +#[stable(feature = "drain", since = "1.6.0")] +pub struct Drain< + 'a, + T: 'a, + #[unstable(feature = "allocator_api", issue = "32838")] A: Allocator + 'a = Global, +> { + /// Index of tail to preserve + pub(super) tail_start: usize, + /// Length of tail + pub(super) tail_len: usize, + /// Current remaining range to remove + pub(super) iter: slice::Iter<'a, T>, + pub(super) vec: NonNull>, +} + +#[stable(feature = "collection_debug", since = "1.17.0")] +impl fmt::Debug for Drain<'_, T, A> { + fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result { + f.debug_tuple("Drain").field(&self.iter.as_slice()).finish() + } +} + +impl<'a, T, A: Allocator> Drain<'a, T, A> { + /// Returns the remaining items of this iterator as a slice. + /// + /// # Examples + /// + /// ``` + /// let mut vec = vec!['a', 'b', 'c']; + /// let mut drain = vec.drain(..); + /// assert_eq!(drain.as_slice(), &['a', 'b', 'c']); + /// let _ = drain.next().unwrap(); + /// assert_eq!(drain.as_slice(), &['b', 'c']); + /// ``` + #[must_use] + #[stable(feature = "vec_drain_as_slice", since = "1.46.0")] + pub fn as_slice(&self) -> &[T] { + self.iter.as_slice() + } + + /// Returns a reference to the underlying allocator. + #[unstable(feature = "allocator_api", issue = "32838")] + #[must_use] + #[inline] + pub fn allocator(&self) -> &A { + unsafe { self.vec.as_ref().allocator() } + } +} + +#[stable(feature = "vec_drain_as_slice", since = "1.46.0")] +impl<'a, T, A: Allocator> AsRef<[T]> for Drain<'a, T, A> { + fn as_ref(&self) -> &[T] { + self.as_slice() + } +} + +#[stable(feature = "drain", since = "1.6.0")] +unsafe impl Sync for Drain<'_, T, A> {} +#[stable(feature = "drain", since = "1.6.0")] +unsafe impl Send for Drain<'_, T, A> {} + +#[stable(feature = "drain", since = "1.6.0")] +impl Iterator for Drain<'_, T, A> { + type Item = T; + + #[inline] + fn next(&mut self) -> Option { + self.iter.next().map(|elt| unsafe { ptr::read(elt as *const _) }) + } + + fn size_hint(&self) -> (usize, Option) { + self.iter.size_hint() + } +} + +#[stable(feature = "drain", since = "1.6.0")] +impl DoubleEndedIterator for Drain<'_, T, A> { + #[inline] + fn next_back(&mut self) -> Option { + self.iter.next_back().map(|elt| unsafe { ptr::read(elt as *const _) }) + } +} + +#[stable(feature = "drain", since = "1.6.0")] +impl Drop for Drain<'_, T, A> { + fn drop(&mut self) { + /// Moves back the un-`Drain`ed elements to restore the original `Vec`. + struct DropGuard<'r, 'a, T, A: Allocator>(&'r mut Drain<'a, T, A>); + + impl<'r, 'a, T, A: Allocator> Drop for DropGuard<'r, 'a, T, A> { + fn drop(&mut self) { + if self.0.tail_len > 0 { + unsafe { + let source_vec = self.0.vec.as_mut(); + // memmove back untouched tail, update to new length + let start = source_vec.len(); + let tail = self.0.tail_start; + if tail != start { + let src = source_vec.as_ptr().add(tail); + let dst = source_vec.as_mut_ptr().add(start); + ptr::copy(src, dst, self.0.tail_len); + } + source_vec.set_len(start + self.0.tail_len); + } + } + } + } + + let iter = mem::replace(&mut self.iter, (&mut []).iter()); + let drop_len = iter.len(); + + let mut vec = self.vec; + + if mem::size_of::() == 0 { + // ZSTs have no identity, so we don't need to move them around, we only need to drop the correct amount. + // this can be achieved by manipulating the Vec length instead of moving values out from `iter`. + unsafe { + let vec = vec.as_mut(); + let old_len = vec.len(); + vec.set_len(old_len + drop_len + self.tail_len); + vec.truncate(old_len + self.tail_len); + } + + return; + } + + // ensure elements are moved back into their appropriate places, even when drop_in_place panics + let _guard = DropGuard(self); + + if drop_len == 0 { + return; + } + + // as_slice() must only be called when iter.len() is > 0 because + // vec::Splice modifies vec::Drain fields and may grow the vec which would invalidate + // the iterator's internal pointers. Creating a reference to deallocated memory + // is invalid even when it is zero-length + let drop_ptr = iter.as_slice().as_ptr(); + + unsafe { + // drop_ptr comes from a slice::Iter which only gives us a &[T] but for drop_in_place + // a pointer with mutable provenance is necessary. Therefore we must reconstruct + // it from the original vec but also avoid creating a &mut to the front since that could + // invalidate raw pointers to it which some unsafe code might rely on. + let vec_ptr = vec.as_mut().as_mut_ptr(); + let drop_offset = drop_ptr.sub_ptr(vec_ptr); + let to_drop = ptr::slice_from_raw_parts_mut(vec_ptr.add(drop_offset), drop_len); + ptr::drop_in_place(to_drop); + } + } +} + +#[stable(feature = "drain", since = "1.6.0")] +impl ExactSizeIterator for Drain<'_, T, A> { + fn is_empty(&self) -> bool { + self.iter.is_empty() + } +} + +#[unstable(feature = "trusted_len", issue = "37572")] +unsafe impl TrustedLen for Drain<'_, T, A> {} + +#[stable(feature = "fused", since = "1.26.0")] +impl FusedIterator for Drain<'_, T, A> {} diff --git a/rust/alloc/vec/drain_filter.rs b/rust/alloc/vec/drain_filter.rs new file mode 100644 index 000000000..b04fce041 --- /dev/null +++ b/rust/alloc/vec/drain_filter.rs @@ -0,0 +1,145 @@ +// SPDX-License-Identifier: Apache-2.0 OR MIT + +use crate::alloc::{Allocator, Global}; +use core::ptr::{self}; +use core::slice::{self}; + +use super::Vec; + +/// An iterator which uses a closure to determine if an element should be removed. +/// +/// This struct is created by [`Vec::drain_filter`]. +/// See its documentation for more. +/// +/// # Example +/// +/// ``` +/// #![feature(drain_filter)] +/// +/// let mut v = vec![0, 1, 2]; +/// let iter: std::vec::DrainFilter<_, _> = v.drain_filter(|x| *x % 2 == 0); +/// ``` +#[unstable(feature = "drain_filter", reason = "recently added", issue = "43244")] +#[derive(Debug)] +pub struct DrainFilter< + 'a, + T, + F, + #[unstable(feature = "allocator_api", issue = "32838")] A: Allocator = Global, +> where + F: FnMut(&mut T) -> bool, +{ + pub(super) vec: &'a mut Vec, + /// The index of the item that will be inspected by the next call to `next`. + pub(super) idx: usize, + /// The number of items that have been drained (removed) thus far. + pub(super) del: usize, + /// The original length of `vec` prior to draining. + pub(super) old_len: usize, + /// The filter test predicate. + pub(super) pred: F, + /// A flag that indicates a panic has occurred in the filter test predicate. + /// This is used as a hint in the drop implementation to prevent consumption + /// of the remainder of the `DrainFilter`. Any unprocessed items will be + /// backshifted in the `vec`, but no further items will be dropped or + /// tested by the filter predicate. + pub(super) panic_flag: bool, +} + +impl DrainFilter<'_, T, F, A> +where + F: FnMut(&mut T) -> bool, +{ + /// Returns a reference to the underlying allocator. + #[unstable(feature = "allocator_api", issue = "32838")] + #[inline] + pub fn allocator(&self) -> &A { + self.vec.allocator() + } +} + +#[unstable(feature = "drain_filter", reason = "recently added", issue = "43244")] +impl Iterator for DrainFilter<'_, T, F, A> +where + F: FnMut(&mut T) -> bool, +{ + type Item = T; + + fn next(&mut self) -> Option { + unsafe { + while self.idx < self.old_len { + let i = self.idx; + let v = slice::from_raw_parts_mut(self.vec.as_mut_ptr(), self.old_len); + self.panic_flag = true; + let drained = (self.pred)(&mut v[i]); + self.panic_flag = false; + // Update the index *after* the predicate is called. If the index + // is updated prior and the predicate panics, the element at this + // index would be leaked. + self.idx += 1; + if drained { + self.del += 1; + return Some(ptr::read(&v[i])); + } else if self.del > 0 { + let del = self.del; + let src: *const T = &v[i]; + let dst: *mut T = &mut v[i - del]; + ptr::copy_nonoverlapping(src, dst, 1); + } + } + None + } + } + + fn size_hint(&self) -> (usize, Option) { + (0, Some(self.old_len - self.idx)) + } +} + +#[unstable(feature = "drain_filter", reason = "recently added", issue = "43244")] +impl Drop for DrainFilter<'_, T, F, A> +where + F: FnMut(&mut T) -> bool, +{ + fn drop(&mut self) { + struct BackshiftOnDrop<'a, 'b, T, F, A: Allocator> + where + F: FnMut(&mut T) -> bool, + { + drain: &'b mut DrainFilter<'a, T, F, A>, + } + + impl<'a, 'b, T, F, A: Allocator> Drop for BackshiftOnDrop<'a, 'b, T, F, A> + where + F: FnMut(&mut T) -> bool, + { + fn drop(&mut self) { + unsafe { + if self.drain.idx < self.drain.old_len && self.drain.del > 0 { + // This is a pretty messed up state, and there isn't really an + // obviously right thing to do. We don't want to keep trying + // to execute `pred`, so we just backshift all the unprocessed + // elements and tell the vec that they still exist. The backshift + // is required to prevent a double-drop of the last successfully + // drained item prior to a panic in the predicate. + let ptr = self.drain.vec.as_mut_ptr(); + let src = ptr.add(self.drain.idx); + let dst = src.sub(self.drain.del); + let tail_len = self.drain.old_len - self.drain.idx; + src.copy_to(dst, tail_len); + } + self.drain.vec.set_len(self.drain.old_len - self.drain.del); + } + } + } + + let backshift = BackshiftOnDrop { drain: self }; + + // Attempt to consume any remaining elements if the filter predicate + // has not yet panicked. We'll backshift any remaining elements + // whether we've already panicked or if the consumption here panics. + if !backshift.drain.panic_flag { + backshift.drain.for_each(drop); + } + } +} diff --git a/rust/alloc/vec/into_iter.rs b/rust/alloc/vec/into_iter.rs new file mode 100644 index 000000000..f7a50e766 --- /dev/null +++ b/rust/alloc/vec/into_iter.rs @@ -0,0 +1,366 @@ +// SPDX-License-Identifier: Apache-2.0 OR MIT + +#[cfg(not(no_global_oom_handling))] +use super::AsVecIntoIter; +use crate::alloc::{Allocator, Global}; +use crate::raw_vec::RawVec; +use core::fmt; +use core::intrinsics::arith_offset; +use core::iter::{ + FusedIterator, InPlaceIterable, SourceIter, TrustedLen, TrustedRandomAccessNoCoerce, +}; +use core::marker::PhantomData; +use core::mem::{self, ManuallyDrop}; +#[cfg(not(no_global_oom_handling))] +use core::ops::Deref; +use core::ptr::{self, NonNull}; +use core::slice::{self}; + +/// An iterator that moves out of a vector. +/// +/// This `struct` is created by the `into_iter` method on [`Vec`](super::Vec) +/// (provided by the [`IntoIterator`] trait). +/// +/// # Example +/// +/// ``` +/// let v = vec![0, 1, 2]; +/// let iter: std::vec::IntoIter<_> = v.into_iter(); +/// ``` +#[stable(feature = "rust1", since = "1.0.0")] +#[rustc_insignificant_dtor] +pub struct IntoIter< + T, + #[unstable(feature = "allocator_api", issue = "32838")] A: Allocator = Global, +> { + pub(super) buf: NonNull, + pub(super) phantom: PhantomData, + pub(super) cap: usize, + // the drop impl reconstructs a RawVec from buf, cap and alloc + // to avoid dropping the allocator twice we need to wrap it into ManuallyDrop + pub(super) alloc: ManuallyDrop, + pub(super) ptr: *const T, + pub(super) end: *const T, +} + +#[stable(feature = "vec_intoiter_debug", since = "1.13.0")] +impl fmt::Debug for IntoIter { + fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result { + f.debug_tuple("IntoIter").field(&self.as_slice()).finish() + } +} + +impl IntoIter { + /// Returns the remaining items of this iterator as a slice. + /// + /// # Examples + /// + /// ``` + /// let vec = vec!['a', 'b', 'c']; + /// let mut into_iter = vec.into_iter(); + /// assert_eq!(into_iter.as_slice(), &['a', 'b', 'c']); + /// let _ = into_iter.next().unwrap(); + /// assert_eq!(into_iter.as_slice(), &['b', 'c']); + /// ``` + #[stable(feature = "vec_into_iter_as_slice", since = "1.15.0")] + pub fn as_slice(&self) -> &[T] { + unsafe { slice::from_raw_parts(self.ptr, self.len()) } + } + + /// Returns the remaining items of this iterator as a mutable slice. + /// + /// # Examples + /// + /// ``` + /// let vec = vec!['a', 'b', 'c']; + /// let mut into_iter = vec.into_iter(); + /// assert_eq!(into_iter.as_slice(), &['a', 'b', 'c']); + /// into_iter.as_mut_slice()[2] = 'z'; + /// assert_eq!(into_iter.next().unwrap(), 'a'); + /// assert_eq!(into_iter.next().unwrap(), 'b'); + /// assert_eq!(into_iter.next().unwrap(), 'z'); + /// ``` + #[stable(feature = "vec_into_iter_as_slice", since = "1.15.0")] + pub fn as_mut_slice(&mut self) -> &mut [T] { + unsafe { &mut *self.as_raw_mut_slice() } + } + + /// Returns a reference to the underlying allocator. + #[unstable(feature = "allocator_api", issue = "32838")] + #[inline] + pub fn allocator(&self) -> &A { + &self.alloc + } + + fn as_raw_mut_slice(&mut self) -> *mut [T] { + ptr::slice_from_raw_parts_mut(self.ptr as *mut T, self.len()) + } + + /// Drops remaining elements and relinquishes the backing allocation. + /// + /// This is roughly equivalent to the following, but more efficient + /// + /// ``` + /// # let mut into_iter = Vec::::with_capacity(10).into_iter(); + /// (&mut into_iter).for_each(core::mem::drop); + /// unsafe { core::ptr::write(&mut into_iter, Vec::new().into_iter()); } + /// ``` + /// + /// This method is used by in-place iteration, refer to the vec::in_place_collect + /// documentation for an overview. + #[cfg(not(no_global_oom_handling))] + pub(super) fn forget_allocation_drop_remaining(&mut self) { + let remaining = self.as_raw_mut_slice(); + + // overwrite the individual fields instead of creating a new + // struct and then overwriting &mut self. + // this creates less assembly + self.cap = 0; + self.buf = unsafe { NonNull::new_unchecked(RawVec::NEW.ptr()) }; + self.ptr = self.buf.as_ptr(); + self.end = self.buf.as_ptr(); + + unsafe { + ptr::drop_in_place(remaining); + } + } + + /// Forgets to Drop the remaining elements while still allowing the backing allocation to be freed. + #[allow(dead_code)] + pub(crate) fn forget_remaining_elements(&mut self) { + self.ptr = self.end; + } +} + +#[stable(feature = "vec_intoiter_as_ref", since = "1.46.0")] +impl AsRef<[T]> for IntoIter { + fn as_ref(&self) -> &[T] { + self.as_slice() + } +} + +#[stable(feature = "rust1", since = "1.0.0")] +unsafe impl Send for IntoIter {} +#[stable(feature = "rust1", since = "1.0.0")] +unsafe impl Sync for IntoIter {} + +#[stable(feature = "rust1", since = "1.0.0")] +impl Iterator for IntoIter { + type Item = T; + + #[inline] + fn next(&mut self) -> Option { + if self.ptr as *const _ == self.end { + None + } else if mem::size_of::() == 0 { + // purposefully don't use 'ptr.offset' because for + // vectors with 0-size elements this would return the + // same pointer. + self.ptr = unsafe { arith_offset(self.ptr as *const i8, 1) as *mut T }; + + // Make up a value of this ZST. + Some(unsafe { mem::zeroed() }) + } else { + let old = self.ptr; + self.ptr = unsafe { self.ptr.offset(1) }; + + Some(unsafe { ptr::read(old) }) + } + } + + #[inline] + fn size_hint(&self) -> (usize, Option) { + let exact = if mem::size_of::() == 0 { + self.end.addr().wrapping_sub(self.ptr.addr()) + } else { + unsafe { self.end.sub_ptr(self.ptr) } + }; + (exact, Some(exact)) + } + + #[inline] + fn advance_by(&mut self, n: usize) -> Result<(), usize> { + let step_size = self.len().min(n); + let to_drop = ptr::slice_from_raw_parts_mut(self.ptr as *mut T, step_size); + if mem::size_of::() == 0 { + // SAFETY: due to unchecked casts of unsigned amounts to signed offsets the wraparound + // effectively results in unsigned pointers representing positions 0..usize::MAX, + // which is valid for ZSTs. + self.ptr = unsafe { arith_offset(self.ptr as *const i8, step_size as isize) as *mut T } + } else { + // SAFETY: the min() above ensures that step_size is in bounds + self.ptr = unsafe { self.ptr.add(step_size) }; + } + // SAFETY: the min() above ensures that step_size is in bounds + unsafe { + ptr::drop_in_place(to_drop); + } + if step_size < n { + return Err(step_size); + } + Ok(()) + } + + #[inline] + fn count(self) -> usize { + self.len() + } + + unsafe fn __iterator_get_unchecked(&mut self, i: usize) -> Self::Item + where + Self: TrustedRandomAccessNoCoerce, + { + // SAFETY: the caller must guarantee that `i` is in bounds of the + // `Vec`, so `i` cannot overflow an `isize`, and the `self.ptr.add(i)` + // is guaranteed to pointer to an element of the `Vec` and + // thus guaranteed to be valid to dereference. + // + // Also note the implementation of `Self: TrustedRandomAccess` requires + // that `T: Copy` so reading elements from the buffer doesn't invalidate + // them for `Drop`. + unsafe { + if mem::size_of::() == 0 { mem::zeroed() } else { ptr::read(self.ptr.add(i)) } + } + } +} + +#[stable(feature = "rust1", since = "1.0.0")] +impl DoubleEndedIterator for IntoIter { + #[inline] + fn next_back(&mut self) -> Option { + if self.end == self.ptr { + None + } else if mem::size_of::() == 0 { + // See above for why 'ptr.offset' isn't used + self.end = unsafe { arith_offset(self.end as *const i8, -1) as *mut T }; + + // Make up a value of this ZST. + Some(unsafe { mem::zeroed() }) + } else { + self.end = unsafe { self.end.offset(-1) }; + + Some(unsafe { ptr::read(self.end) }) + } + } + + #[inline] + fn advance_back_by(&mut self, n: usize) -> Result<(), usize> { + let step_size = self.len().min(n); + if mem::size_of::() == 0 { + // SAFETY: same as for advance_by() + self.end = unsafe { + arith_offset(self.end as *const i8, step_size.wrapping_neg() as isize) as *mut T + } + } else { + // SAFETY: same as for advance_by() + self.end = unsafe { self.end.offset(step_size.wrapping_neg() as isize) }; + } + let to_drop = ptr::slice_from_raw_parts_mut(self.end as *mut T, step_size); + // SAFETY: same as for advance_by() + unsafe { + ptr::drop_in_place(to_drop); + } + if step_size < n { + return Err(step_size); + } + Ok(()) + } +} + +#[stable(feature = "rust1", since = "1.0.0")] +impl ExactSizeIterator for IntoIter { + fn is_empty(&self) -> bool { + self.ptr == self.end + } +} + +#[stable(feature = "fused", since = "1.26.0")] +impl FusedIterator for IntoIter {} + +#[unstable(feature = "trusted_len", issue = "37572")] +unsafe impl TrustedLen for IntoIter {} + +#[doc(hidden)] +#[unstable(issue = "none", feature = "std_internals")] +#[rustc_unsafe_specialization_marker] +pub trait NonDrop {} + +// T: Copy as approximation for !Drop since get_unchecked does not advance self.ptr +// and thus we can't implement drop-handling +#[unstable(issue = "none", feature = "std_internals")] +impl NonDrop for T {} + +#[doc(hidden)] +#[unstable(issue = "none", feature = "std_internals")] +// TrustedRandomAccess (without NoCoerce) must not be implemented because +// subtypes/supertypes of `T` might not be `NonDrop` +unsafe impl TrustedRandomAccessNoCoerce for IntoIter +where + T: NonDrop, +{ + const MAY_HAVE_SIDE_EFFECT: bool = false; +} + +#[cfg(not(no_global_oom_handling))] +#[stable(feature = "vec_into_iter_clone", since = "1.8.0")] +impl Clone for IntoIter { + #[cfg(not(test))] + fn clone(&self) -> Self { + self.as_slice().to_vec_in(self.alloc.deref().clone()).into_iter() + } + #[cfg(test)] + fn clone(&self) -> Self { + crate::slice::to_vec(self.as_slice(), self.alloc.deref().clone()).into_iter() + } +} + +#[stable(feature = "rust1", since = "1.0.0")] +unsafe impl<#[may_dangle] T, A: Allocator> Drop for IntoIter { + fn drop(&mut self) { + struct DropGuard<'a, T, A: Allocator>(&'a mut IntoIter); + + impl Drop for DropGuard<'_, T, A> { + fn drop(&mut self) { + unsafe { + // `IntoIter::alloc` is not used anymore after this and will be dropped by RawVec + let alloc = ManuallyDrop::take(&mut self.0.alloc); + // RawVec handles deallocation + let _ = RawVec::from_raw_parts_in(self.0.buf.as_ptr(), self.0.cap, alloc); + } + } + } + + let guard = DropGuard(self); + // destroy the remaining elements + unsafe { + ptr::drop_in_place(guard.0.as_raw_mut_slice()); + } + // now `guard` will be dropped and do the rest + } +} + +// In addition to the SAFETY invariants of the following three unsafe traits +// also refer to the vec::in_place_collect module documentation to get an overview +#[unstable(issue = "none", feature = "inplace_iteration")] +#[doc(hidden)] +unsafe impl InPlaceIterable for IntoIter {} + +#[unstable(issue = "none", feature = "inplace_iteration")] +#[doc(hidden)] +unsafe impl SourceIter for IntoIter { + type Source = Self; + + #[inline] + unsafe fn as_inner(&mut self) -> &mut Self::Source { + self + } +} + +#[cfg(not(no_global_oom_handling))] +unsafe impl AsVecIntoIter for IntoIter { + type Item = T; + + fn as_into_iter(&mut self) -> &mut IntoIter { + self + } +} diff --git a/rust/alloc/vec/is_zero.rs b/rust/alloc/vec/is_zero.rs new file mode 100644 index 000000000..377f3d172 --- /dev/null +++ b/rust/alloc/vec/is_zero.rs @@ -0,0 +1,120 @@ +// SPDX-License-Identifier: Apache-2.0 OR MIT + +use crate::boxed::Box; + +#[rustc_specialization_trait] +pub(super) unsafe trait IsZero { + /// Whether this value's representation is all zeros + fn is_zero(&self) -> bool; +} + +macro_rules! impl_is_zero { + ($t:ty, $is_zero:expr) => { + unsafe impl IsZero for $t { + #[inline] + fn is_zero(&self) -> bool { + $is_zero(*self) + } + } + }; +} + +impl_is_zero!(i16, |x| x == 0); +impl_is_zero!(i32, |x| x == 0); +impl_is_zero!(i64, |x| x == 0); +impl_is_zero!(i128, |x| x == 0); +impl_is_zero!(isize, |x| x == 0); + +impl_is_zero!(u16, |x| x == 0); +impl_is_zero!(u32, |x| x == 0); +impl_is_zero!(u64, |x| x == 0); +impl_is_zero!(u128, |x| x == 0); +impl_is_zero!(usize, |x| x == 0); + +impl_is_zero!(bool, |x| x == false); +impl_is_zero!(char, |x| x == '\0'); + +impl_is_zero!(f32, |x: f32| x.to_bits() == 0); +impl_is_zero!(f64, |x: f64| x.to_bits() == 0); + +unsafe impl IsZero for *const T { + #[inline] + fn is_zero(&self) -> bool { + (*self).is_null() + } +} + +unsafe impl IsZero for *mut T { + #[inline] + fn is_zero(&self) -> bool { + (*self).is_null() + } +} + +unsafe impl IsZero for [T; N] { + #[inline] + fn is_zero(&self) -> bool { + // Because this is generated as a runtime check, it's not obvious that + // it's worth doing if the array is really long. The threshold here + // is largely arbitrary, but was picked because as of 2022-05-01 LLVM + // can const-fold the check in `vec![[0; 32]; n]` but not in + // `vec![[0; 64]; n]`: https://godbolt.org/z/WTzjzfs5b + // Feel free to tweak if you have better evidence. + + N <= 32 && self.iter().all(IsZero::is_zero) + } +} + +// `Option<&T>` and `Option>` are guaranteed to represent `None` as null. +// For fat pointers, the bytes that would be the pointer metadata in the `Some` +// variant are padding in the `None` variant, so ignoring them and +// zero-initializing instead is ok. +// `Option<&mut T>` never implements `Clone`, so there's no need for an impl of +// `SpecFromElem`. + +unsafe impl IsZero for Option<&T> { + #[inline] + fn is_zero(&self) -> bool { + self.is_none() + } +} + +unsafe impl IsZero for Option> { + #[inline] + fn is_zero(&self) -> bool { + self.is_none() + } +} + +// `Option` and similar have a representation guarantee that +// they're the same size as the corresponding `u32` type, as well as a guarantee +// that transmuting between `NonZeroU32` and `Option` works. +// While the documentation officially makes it UB to transmute from `None`, +// we're the standard library so we can make extra inferences, and we know that +// the only niche available to represent `None` is the one that's all zeros. + +macro_rules! impl_is_zero_option_of_nonzero { + ($($t:ident,)+) => {$( + unsafe impl IsZero for Option { + #[inline] + fn is_zero(&self) -> bool { + self.is_none() + } + } + )+}; +} + +impl_is_zero_option_of_nonzero!( + NonZeroU8, + NonZeroU16, + NonZeroU32, + NonZeroU64, + NonZeroU128, + NonZeroI8, + NonZeroI16, + NonZeroI32, + NonZeroI64, + NonZeroI128, + NonZeroUsize, + NonZeroIsize, +); diff --git a/rust/alloc/vec/mod.rs b/rust/alloc/vec/mod.rs new file mode 100644 index 000000000..540787804 --- /dev/null +++ b/rust/alloc/vec/mod.rs @@ -0,0 +1,3140 @@ +// SPDX-License-Identifier: Apache-2.0 OR MIT + +//! A contiguous growable array type with heap-allocated contents, written +//! `Vec`. +//! +//! Vectors have *O*(1) indexing, amortized *O*(1) push (to the end) and +//! *O*(1) pop (from the end). +//! +//! Vectors ensure they never allocate more than `isize::MAX` bytes. +//! +//! # Examples +//! +//! You can explicitly create a [`Vec`] with [`Vec::new`]: +//! +//! ``` +//! let v: Vec = Vec::new(); +//! ``` +//! +//! ...or by using the [`vec!`] macro: +//! +//! ``` +//! let v: Vec = vec![]; +//! +//! let v = vec![1, 2, 3, 4, 5]; +//! +//! let v = vec![0; 10]; // ten zeroes +//! ``` +//! +//! You can [`push`] values onto the end of a vector (which will grow the vector +//! as needed): +//! +//! ``` +//! let mut v = vec![1, 2]; +//! +//! v.push(3); +//! ``` +//! +//! Popping values works in much the same way: +//! +//! ``` +//! let mut v = vec![1, 2]; +//! +//! let two = v.pop(); +//! ``` +//! +//! Vectors also support indexing (through the [`Index`] and [`IndexMut`] traits): +//! +//! ``` +//! let mut v = vec![1, 2, 3]; +//! let three = v[2]; +//! v[1] = v[1] + 5; +//! ``` +//! +//! [`push`]: Vec::push + +#![stable(feature = "rust1", since = "1.0.0")] + +#[cfg(not(no_global_oom_handling))] +use core::cmp; +use core::cmp::Ordering; +use core::convert::TryFrom; +use core::fmt; +use core::hash::{Hash, Hasher}; +use core::intrinsics::{arith_offset, assume}; +use core::iter; +#[cfg(not(no_global_oom_handling))] +use core::iter::FromIterator; +use core::marker::PhantomData; +use core::mem::{self, ManuallyDrop, MaybeUninit}; +use core::ops::{self, Index, IndexMut, Range, RangeBounds}; +use core::ptr::{self, NonNull}; +use core::slice::{self, SliceIndex}; + +use crate::alloc::{Allocator, Global}; +use crate::borrow::{Cow, ToOwned}; +use crate::boxed::Box; +use crate::collections::TryReserveError; +use crate::raw_vec::RawVec; + +#[unstable(feature = "drain_filter", reason = "recently added", issue = "43244")] +pub use self::drain_filter::DrainFilter; + +mod drain_filter; + +#[cfg(not(no_global_oom_handling))] +#[stable(feature = "vec_splice", since = "1.21.0")] +pub use self::splice::Splice; + +#[cfg(not(no_global_oom_handling))] +mod splice; + +#[stable(feature = "drain", since = "1.6.0")] +pub use self::drain::Drain; + +mod drain; + +#[cfg(not(no_global_oom_handling))] +mod cow; + +#[cfg(not(no_global_oom_handling))] +pub(crate) use self::in_place_collect::AsVecIntoIter; +#[stable(feature = "rust1", since = "1.0.0")] +pub use self::into_iter::IntoIter; + +mod into_iter; + +#[cfg(not(no_global_oom_handling))] +use self::is_zero::IsZero; + +mod is_zero; + +#[cfg(not(no_global_oom_handling))] +mod in_place_collect; + +mod partial_eq; + +#[cfg(not(no_global_oom_handling))] +use self::spec_from_elem::SpecFromElem; + +#[cfg(not(no_global_oom_handling))] +mod spec_from_elem; + +#[cfg(not(no_global_oom_handling))] +use self::set_len_on_drop::SetLenOnDrop; + +#[cfg(not(no_global_oom_handling))] +mod set_len_on_drop; + +#[cfg(not(no_global_oom_handling))] +use self::in_place_drop::InPlaceDrop; + +#[cfg(not(no_global_oom_handling))] +mod in_place_drop; + +#[cfg(not(no_global_oom_handling))] +use self::spec_from_iter_nested::SpecFromIterNested; + +#[cfg(not(no_global_oom_handling))] +mod spec_from_iter_nested; + +#[cfg(not(no_global_oom_handling))] +use self::spec_from_iter::SpecFromIter; + +#[cfg(not(no_global_oom_handling))] +mod spec_from_iter; + +#[cfg(not(no_global_oom_handling))] +use self::spec_extend::SpecExtend; + +#[cfg(not(no_global_oom_handling))] +mod spec_extend; + +/// A contiguous growable array type, written as `Vec`, short for 'vector'. +/// +/// # Examples +/// +/// ``` +/// let mut vec = Vec::new(); +/// vec.push(1); +/// vec.push(2); +/// +/// assert_eq!(vec.len(), 2); +/// assert_eq!(vec[0], 1); +/// +/// assert_eq!(vec.pop(), Some(2)); +/// assert_eq!(vec.len(), 1); +/// +/// vec[0] = 7; +/// assert_eq!(vec[0], 7); +/// +/// vec.extend([1, 2, 3].iter().copied()); +/// +/// for x in &vec { +/// println!("{x}"); +/// } +/// assert_eq!(vec, [7, 1, 2, 3]); +/// ``` +/// +/// The [`vec!`] macro is provided for convenient initialization: +/// +/// ``` +/// let mut vec1 = vec![1, 2, 3]; +/// vec1.push(4); +/// let vec2 = Vec::from([1, 2, 3, 4]); +/// assert_eq!(vec1, vec2); +/// ``` +/// +/// It can also initialize each element of a `Vec` with a given value. +/// This may be more efficient than performing allocation and initialization +/// in separate steps, especially when initializing a vector of zeros: +/// +/// ``` +/// let vec = vec![0; 5]; +/// assert_eq!(vec, [0, 0, 0, 0, 0]); +/// +/// // The following is equivalent, but potentially slower: +/// let mut vec = Vec::with_capacity(5); +/// vec.resize(5, 0); +/// assert_eq!(vec, [0, 0, 0, 0, 0]); +/// ``` +/// +/// For more information, see +/// [Capacity and Reallocation](#capacity-and-reallocation). +/// +/// Use a `Vec` as an efficient stack: +/// +/// ``` +/// let mut stack = Vec::new(); +/// +/// stack.push(1); +/// stack.push(2); +/// stack.push(3); +/// +/// while let Some(top) = stack.pop() { +/// // Prints 3, 2, 1 +/// println!("{top}"); +/// } +/// ``` +/// +/// # Indexing +/// +/// The `Vec` type allows to access values by index, because it implements the +/// [`Index`] trait. An example will be more explicit: +/// +/// ``` +/// let v = vec![0, 2, 4, 6]; +/// println!("{}", v[1]); // it will display '2' +/// ``` +/// +/// However be careful: if you try to access an index which isn't in the `Vec`, +/// your software will panic! You cannot do this: +/// +/// ```should_panic +/// let v = vec![0, 2, 4, 6]; +/// println!("{}", v[6]); // it will panic! +/// ``` +/// +/// Use [`get`] and [`get_mut`] if you want to check whether the index is in +/// the `Vec`. +/// +/// # Slicing +/// +/// A `Vec` can be mutable. On the other hand, slices are read-only objects. +/// To get a [slice][prim@slice], use [`&`]. Example: +/// +/// ``` +/// fn read_slice(slice: &[usize]) { +/// // ... +/// } +/// +/// let v = vec![0, 1]; +/// read_slice(&v); +/// +/// // ... and that's all! +/// // you can also do it like this: +/// let u: &[usize] = &v; +/// // or like this: +/// let u: &[_] = &v; +/// ``` +/// +/// In Rust, it's more common to pass slices as arguments rather than vectors +/// when you just want to provide read access. The same goes for [`String`] and +/// [`&str`]. +/// +/// # Capacity and reallocation +/// +/// The capacity of a vector is the amount of space allocated for any future +/// elements that will be added onto the vector. This is not to be confused with +/// the *length* of a vector, which specifies the number of actual elements +/// within the vector. If a vector's length exceeds its capacity, its capacity +/// will automatically be increased, but its elements will have to be +/// reallocated. +/// +/// For example, a vector with capacity 10 and length 0 would be an empty vector +/// with space for 10 more elements. Pushing 10 or fewer elements onto the +/// vector will not change its capacity or cause reallocation to occur. However, +/// if the vector's length is increased to 11, it will have to reallocate, which +/// can be slow. For this reason, it is recommended to use [`Vec::with_capacity`] +/// whenever possible to specify how big the vector is expected to get. +/// +/// # Guarantees +/// +/// Due to its incredibly fundamental nature, `Vec` makes a lot of guarantees +/// about its design. This ensures that it's as low-overhead as possible in +/// the general case, and can be correctly manipulated in primitive ways +/// by unsafe code. Note that these guarantees refer to an unqualified `Vec`. +/// If additional type parameters are added (e.g., to support custom allocators), +/// overriding their defaults may change the behavior. +/// +/// Most fundamentally, `Vec` is and always will be a (pointer, capacity, length) +/// triplet. No more, no less. The order of these fields is completely +/// unspecified, and you should use the appropriate methods to modify these. +/// The pointer will never be null, so this type is null-pointer-optimized. +/// +/// However, the pointer might not actually point to allocated memory. In particular, +/// if you construct a `Vec` with capacity 0 via [`Vec::new`], [`vec![]`][`vec!`], +/// [`Vec::with_capacity(0)`][`Vec::with_capacity`], or by calling [`shrink_to_fit`] +/// on an empty Vec, it will not allocate memory. Similarly, if you store zero-sized +/// types inside a `Vec`, it will not allocate space for them. *Note that in this case +/// the `Vec` might not report a [`capacity`] of 0*. `Vec` will allocate if and only +/// if [mem::size_of::\]\() * [capacity]\() > 0. In general, `Vec`'s allocation +/// details are very subtle --- if you intend to allocate memory using a `Vec` +/// and use it for something else (either to pass to unsafe code, or to build your +/// own memory-backed collection), be sure to deallocate this memory by using +/// `from_raw_parts` to recover the `Vec` and then dropping it. +/// +/// If a `Vec` *has* allocated memory, then the memory it points to is on the heap +/// (as defined by the allocator Rust is configured to use by default), and its +/// pointer points to [`len`] initialized, contiguous elements in order (what +/// you would see if you coerced it to a slice), followed by [capacity] - [len] +/// logically uninitialized, contiguous elements. +/// +/// A vector containing the elements `'a'` and `'b'` with capacity 4 can be +/// visualized as below. The top part is the `Vec` struct, it contains a +/// pointer to the head of the allocation in the heap, length and capacity. +/// The bottom part is the allocation on the heap, a contiguous memory block. +/// +/// ```text +/// ptr len capacity +/// +--------+--------+--------+ +/// | 0x0123 | 2 | 4 | +/// +--------+--------+--------+ +/// | +/// v +/// Heap +--------+--------+--------+--------+ +/// | 'a' | 'b' | uninit | uninit | +/// +--------+--------+--------+--------+ +/// ``` +/// +/// - **uninit** represents memory that is not initialized, see [`MaybeUninit`]. +/// - Note: the ABI is not stable and `Vec` makes no guarantees about its memory +/// layout (including the order of fields). +/// +/// `Vec` will never perform a "small optimization" where elements are actually +/// stored on the stack for two reasons: +/// +/// * It would make it more difficult for unsafe code to correctly manipulate +/// a `Vec`. The contents of a `Vec` wouldn't have a stable address if it were +/// only moved, and it would be more difficult to determine if a `Vec` had +/// actually allocated memory. +/// +/// * It would penalize the general case, incurring an additional branch +/// on every access. +/// +/// `Vec` will never automatically shrink itself, even if completely empty. This +/// ensures no unnecessary allocations or deallocations occur. Emptying a `Vec` +/// and then filling it back up to the same [`len`] should incur no calls to +/// the allocator. If you wish to free up unused memory, use +/// [`shrink_to_fit`] or [`shrink_to`]. +/// +/// [`push`] and [`insert`] will never (re)allocate if the reported capacity is +/// sufficient. [`push`] and [`insert`] *will* (re)allocate if +/// [len] == [capacity]. That is, the reported capacity is completely +/// accurate, and can be relied on. It can even be used to manually free the memory +/// allocated by a `Vec` if desired. Bulk insertion methods *may* reallocate, even +/// when not necessary. +/// +/// `Vec` does not guarantee any particular growth strategy when reallocating +/// when full, nor when [`reserve`] is called. The current strategy is basic +/// and it may prove desirable to use a non-constant growth factor. Whatever +/// strategy is used will of course guarantee *O*(1) amortized [`push`]. +/// +/// `vec![x; n]`, `vec![a, b, c, d]`, and +/// [`Vec::with_capacity(n)`][`Vec::with_capacity`], will all produce a `Vec` +/// with exactly the requested capacity. If [len] == [capacity], +/// (as is the case for the [`vec!`] macro), then a `Vec` can be converted to +/// and from a [`Box<[T]>`][owned slice] without reallocating or moving the elements. +/// +/// `Vec` will not specifically overwrite any data that is removed from it, +/// but also won't specifically preserve it. Its uninitialized memory is +/// scratch space that it may use however it wants. It will generally just do +/// whatever is most efficient or otherwise easy to implement. Do not rely on +/// removed data to be erased for security purposes. Even if you drop a `Vec`, its +/// buffer may simply be reused by another allocation. Even if you zero a `Vec`'s memory +/// first, that might not actually happen because the optimizer does not consider +/// this a side-effect that must be preserved. There is one case which we will +/// not break, however: using `unsafe` code to write to the excess capacity, +/// and then increasing the length to match, is always valid. +/// +/// Currently, `Vec` does not guarantee the order in which elements are dropped. +/// The order has changed in the past and may change again. +/// +/// [`get`]: ../../std/vec/struct.Vec.html#method.get +/// [`get_mut`]: ../../std/vec/struct.Vec.html#method.get_mut +/// [`String`]: crate::string::String +/// [`&str`]: type@str +/// [`shrink_to_fit`]: Vec::shrink_to_fit +/// [`shrink_to`]: Vec::shrink_to +/// [capacity]: Vec::capacity +/// [`capacity`]: Vec::capacity +/// [mem::size_of::\]: core::mem::size_of +/// [len]: Vec::len +/// [`len`]: Vec::len +/// [`push`]: Vec::push +/// [`insert`]: Vec::insert +/// [`reserve`]: Vec::reserve +/// [`MaybeUninit`]: core::mem::MaybeUninit +/// [owned slice]: Box +#[stable(feature = "rust1", since = "1.0.0")] +#[cfg_attr(not(test), rustc_diagnostic_item = "Vec")] +#[rustc_insignificant_dtor] +pub struct Vec { + buf: RawVec, + len: usize, +} + +//////////////////////////////////////////////////////////////////////////////// +// Inherent methods +//////////////////////////////////////////////////////////////////////////////// + +impl Vec { + /// Constructs a new, empty `Vec`. + /// + /// The vector will not allocate until elements are pushed onto it. + /// + /// # Examples + /// + /// ``` + /// # #![allow(unused_mut)] + /// let mut vec: Vec = Vec::new(); + /// ``` + #[inline] + #[rustc_const_stable(feature = "const_vec_new", since = "1.39.0")] + #[stable(feature = "rust1", since = "1.0.0")] + #[must_use] + pub const fn new() -> Self { + Vec { buf: RawVec::NEW, len: 0 } + } + + /// Constructs a new, empty `Vec` with the specified capacity. + /// + /// The vector will be able to hold exactly `capacity` elements without + /// reallocating. If `capacity` is 0, the vector will not allocate. + /// + /// It is important to note that although the returned vector has the + /// *capacity* specified, the vector will have a zero *length*. For an + /// explanation of the difference between length and capacity, see + /// *[Capacity and reallocation]*. + /// + /// [Capacity and reallocation]: #capacity-and-reallocation + /// + /// # Panics + /// + /// Panics if the new capacity exceeds `isize::MAX` bytes. + /// + /// # Examples + /// + /// ``` + /// let mut vec = Vec::with_capacity(10); + /// + /// // The vector contains no items, even though it has capacity for more + /// assert_eq!(vec.len(), 0); + /// assert_eq!(vec.capacity(), 10); + /// + /// // These are all done without reallocating... + /// for i in 0..10 { + /// vec.push(i); + /// } + /// assert_eq!(vec.len(), 10); + /// assert_eq!(vec.capacity(), 10); + /// + /// // ...but this may make the vector reallocate + /// vec.push(11); + /// assert_eq!(vec.len(), 11); + /// assert!(vec.capacity() >= 11); + /// ``` + #[cfg(not(no_global_oom_handling))] + #[inline] + #[stable(feature = "rust1", since = "1.0.0")] + #[must_use] + pub fn with_capacity(capacity: usize) -> Self { + Self::with_capacity_in(capacity, Global) + } + + /// Creates a `Vec` directly from the raw components of another vector. + /// + /// # Safety + /// + /// This is highly unsafe, due to the number of invariants that aren't + /// checked: + /// + /// * `ptr` needs to have been previously allocated via [`String`]/`Vec` + /// (at least, it's highly likely to be incorrect if it wasn't). + /// * `T` needs to have the same alignment as what `ptr` was allocated with. + /// (`T` having a less strict alignment is not sufficient, the alignment really + /// needs to be equal to satisfy the [`dealloc`] requirement that memory must be + /// allocated and deallocated with the same layout.) + /// * The size of `T` times the `capacity` (ie. the allocated size in bytes) needs + /// to be the same size as the pointer was allocated with. (Because similar to + /// alignment, [`dealloc`] must be called with the same layout `size`.) + /// * `length` needs to be less than or equal to `capacity`. + /// + /// Violating these may cause problems like corrupting the allocator's + /// internal data structures. For example it is normally **not** safe + /// to build a `Vec` from a pointer to a C `char` array with length + /// `size_t`, doing so is only safe if the array was initially allocated by + /// a `Vec` or `String`. + /// It's also not safe to build one from a `Vec` and its length, because + /// the allocator cares about the alignment, and these two types have different + /// alignments. The buffer was allocated with alignment 2 (for `u16`), but after + /// turning it into a `Vec` it'll be deallocated with alignment 1. To avoid + /// these issues, it is often preferable to do casting/transmuting using + /// [`slice::from_raw_parts`] instead. + /// + /// The ownership of `ptr` is effectively transferred to the + /// `Vec` which may then deallocate, reallocate or change the + /// contents of memory pointed to by the pointer at will. Ensure + /// that nothing else uses the pointer after calling this + /// function. + /// + /// [`String`]: crate::string::String + /// [`dealloc`]: crate::alloc::GlobalAlloc::dealloc + /// + /// # Examples + /// + /// ``` + /// use std::ptr; + /// use std::mem; + /// + /// let v = vec![1, 2, 3]; + /// + // FIXME Update this when vec_into_raw_parts is stabilized + /// // Prevent running `v`'s destructor so we are in complete control + /// // of the allocation. + /// let mut v = mem::ManuallyDrop::new(v); + /// + /// // Pull out the various important pieces of information about `v` + /// let p = v.as_mut_ptr(); + /// let len = v.len(); + /// let cap = v.capacity(); + /// + /// unsafe { + /// // Overwrite memory with 4, 5, 6 + /// for i in 0..len as isize { + /// ptr::write(p.offset(i), 4 + i); + /// } + /// + /// // Put everything back together into a Vec + /// let rebuilt = Vec::from_raw_parts(p, len, cap); + /// assert_eq!(rebuilt, [4, 5, 6]); + /// } + /// ``` + #[inline] + #[stable(feature = "rust1", since = "1.0.0")] + pub unsafe fn from_raw_parts(ptr: *mut T, length: usize, capacity: usize) -> Self { + unsafe { Self::from_raw_parts_in(ptr, length, capacity, Global) } + } +} + +impl Vec { + /// Constructs a new, empty `Vec`. + /// + /// The vector will not allocate until elements are pushed onto it. + /// + /// # Examples + /// + /// ``` + /// #![feature(allocator_api)] + /// + /// use std::alloc::System; + /// + /// # #[allow(unused_mut)] + /// let mut vec: Vec = Vec::new_in(System); + /// ``` + #[inline] + #[unstable(feature = "allocator_api", issue = "32838")] + pub const fn new_in(alloc: A) -> Self { + Vec { buf: RawVec::new_in(alloc), len: 0 } + } + + /// Constructs a new, empty `Vec` with the specified capacity with the provided + /// allocator. + /// + /// The vector will be able to hold exactly `capacity` elements without + /// reallocating. If `capacity` is 0, the vector will not allocate. + /// + /// It is important to note that although the returned vector has the + /// *capacity* specified, the vector will have a zero *length*. For an + /// explanation of the difference between length and capacity, see + /// *[Capacity and reallocation]*. + /// + /// [Capacity and reallocation]: #capacity-and-reallocation + /// + /// # Panics + /// + /// Panics if the new capacity exceeds `isize::MAX` bytes. + /// + /// # Examples + /// + /// ``` + /// #![feature(allocator_api)] + /// + /// use std::alloc::System; + /// + /// let mut vec = Vec::with_capacity_in(10, System); + /// + /// // The vector contains no items, even though it has capacity for more + /// assert_eq!(vec.len(), 0); + /// assert_eq!(vec.capacity(), 10); + /// + /// // These are all done without reallocating... + /// for i in 0..10 { + /// vec.push(i); + /// } + /// assert_eq!(vec.len(), 10); + /// assert_eq!(vec.capacity(), 10); + /// + /// // ...but this may make the vector reallocate + /// vec.push(11); + /// assert_eq!(vec.len(), 11); + /// assert!(vec.capacity() >= 11); + /// ``` + #[cfg(not(no_global_oom_handling))] + #[inline] + #[unstable(feature = "allocator_api", issue = "32838")] + pub fn with_capacity_in(capacity: usize, alloc: A) -> Self { + Vec { buf: RawVec::with_capacity_in(capacity, alloc), len: 0 } + } + + /// Creates a `Vec` directly from the raw components of another vector. + /// + /// # Safety + /// + /// This is highly unsafe, due to the number of invariants that aren't + /// checked: + /// + /// * `ptr` needs to have been previously allocated via [`String`]/`Vec` + /// (at least, it's highly likely to be incorrect if it wasn't). + /// * `T` needs to have the same size and alignment as what `ptr` was allocated with. + /// (`T` having a less strict alignment is not sufficient, the alignment really + /// needs to be equal to satisfy the [`dealloc`] requirement that memory must be + /// allocated and deallocated with the same layout.) + /// * `length` needs to be less than or equal to `capacity`. + /// * `capacity` needs to be the capacity that the pointer was allocated with. + /// + /// Violating these may cause problems like corrupting the allocator's + /// internal data structures. For example it is **not** safe + /// to build a `Vec` from a pointer to a C `char` array with length `size_t`. + /// It's also not safe to build one from a `Vec` and its length, because + /// the allocator cares about the alignment, and these two types have different + /// alignments. The buffer was allocated with alignment 2 (for `u16`), but after + /// turning it into a `Vec` it'll be deallocated with alignment 1. + /// + /// The ownership of `ptr` is effectively transferred to the + /// `Vec` which may then deallocate, reallocate or change the + /// contents of memory pointed to by the pointer at will. Ensure + /// that nothing else uses the pointer after calling this + /// function. + /// + /// [`String`]: crate::string::String + /// [`dealloc`]: crate::alloc::GlobalAlloc::dealloc + /// + /// # Examples + /// + /// ``` + /// #![feature(allocator_api)] + /// + /// use std::alloc::System; + /// + /// use std::ptr; + /// use std::mem; + /// + /// let mut v = Vec::with_capacity_in(3, System); + /// v.push(1); + /// v.push(2); + /// v.push(3); + /// + // FIXME Update this when vec_into_raw_parts is stabilized + /// // Prevent running `v`'s destructor so we are in complete control + /// // of the allocation. + /// let mut v = mem::ManuallyDrop::new(v); + /// + /// // Pull out the various important pieces of information about `v` + /// let p = v.as_mut_ptr(); + /// let len = v.len(); + /// let cap = v.capacity(); + /// let alloc = v.allocator(); + /// + /// unsafe { + /// // Overwrite memory with 4, 5, 6 + /// for i in 0..len as isize { + /// ptr::write(p.offset(i), 4 + i); + /// } + /// + /// // Put everything back together into a Vec + /// let rebuilt = Vec::from_raw_parts_in(p, len, cap, alloc.clone()); + /// assert_eq!(rebuilt, [4, 5, 6]); + /// } + /// ``` + #[inline] + #[unstable(feature = "allocator_api", issue = "32838")] + pub unsafe fn from_raw_parts_in(ptr: *mut T, length: usize, capacity: usize, alloc: A) -> Self { + unsafe { Vec { buf: RawVec::from_raw_parts_in(ptr, capacity, alloc), len: length } } + } + + /// Decomposes a `Vec` into its raw components. + /// + /// Returns the raw pointer to the underlying data, the length of + /// the vector (in elements), and the allocated capacity of the + /// data (in elements). These are the same arguments in the same + /// order as the arguments to [`from_raw_parts`]. + /// + /// After calling this function, the caller is responsible for the + /// memory previously managed by the `Vec`. The only way to do + /// this is to convert the raw pointer, length, and capacity back + /// into a `Vec` with the [`from_raw_parts`] function, allowing + /// the destructor to perform the cleanup. + /// + /// [`from_raw_parts`]: Vec::from_raw_parts + /// + /// # Examples + /// + /// ``` + /// #![feature(vec_into_raw_parts)] + /// let v: Vec = vec![-1, 0, 1]; + /// + /// let (ptr, len, cap) = v.into_raw_parts(); + /// + /// let rebuilt = unsafe { + /// // We can now make changes to the components, such as + /// // transmuting the raw pointer to a compatible type. + /// let ptr = ptr as *mut u32; + /// + /// Vec::from_raw_parts(ptr, len, cap) + /// }; + /// assert_eq!(rebuilt, [4294967295, 0, 1]); + /// ``` + #[unstable(feature = "vec_into_raw_parts", reason = "new API", issue = "65816")] + pub fn into_raw_parts(self) -> (*mut T, usize, usize) { + let mut me = ManuallyDrop::new(self); + (me.as_mut_ptr(), me.len(), me.capacity()) + } + + /// Decomposes a `Vec` into its raw components. + /// + /// Returns the raw pointer to the underlying data, the length of the vector (in elements), + /// the allocated capacity of the data (in elements), and the allocator. These are the same + /// arguments in the same order as the arguments to [`from_raw_parts_in`]. + /// + /// After calling this function, the caller is responsible for the + /// memory previously managed by the `Vec`. The only way to do + /// this is to convert the raw pointer, length, and capacity back + /// into a `Vec` with the [`from_raw_parts_in`] function, allowing + /// the destructor to perform the cleanup. + /// + /// [`from_raw_parts_in`]: Vec::from_raw_parts_in + /// + /// # Examples + /// + /// ``` + /// #![feature(allocator_api, vec_into_raw_parts)] + /// + /// use std::alloc::System; + /// + /// let mut v: Vec = Vec::new_in(System); + /// v.push(-1); + /// v.push(0); + /// v.push(1); + /// + /// let (ptr, len, cap, alloc) = v.into_raw_parts_with_alloc(); + /// + /// let rebuilt = unsafe { + /// // We can now make changes to the components, such as + /// // transmuting the raw pointer to a compatible type. + /// let ptr = ptr as *mut u32; + /// + /// Vec::from_raw_parts_in(ptr, len, cap, alloc) + /// }; + /// assert_eq!(rebuilt, [4294967295, 0, 1]); + /// ``` + #[unstable(feature = "allocator_api", issue = "32838")] + // #[unstable(feature = "vec_into_raw_parts", reason = "new API", issue = "65816")] + pub fn into_raw_parts_with_alloc(self) -> (*mut T, usize, usize, A) { + let mut me = ManuallyDrop::new(self); + let len = me.len(); + let capacity = me.capacity(); + let ptr = me.as_mut_ptr(); + let alloc = unsafe { ptr::read(me.allocator()) }; + (ptr, len, capacity, alloc) + } + + /// Returns the number of elements the vector can hold without + /// reallocating. + /// + /// # Examples + /// + /// ``` + /// let vec: Vec = Vec::with_capacity(10); + /// assert_eq!(vec.capacity(), 10); + /// ``` + #[inline] + #[stable(feature = "rust1", since = "1.0.0")] + pub fn capacity(&self) -> usize { + self.buf.capacity() + } + + /// Reserves capacity for at least `additional` more elements to be inserted + /// in the given `Vec`. The collection may reserve more space to avoid + /// frequent reallocations. After calling `reserve`, capacity will be + /// greater than or equal to `self.len() + additional`. Does nothing if + /// capacity is already sufficient. + /// + /// # Panics + /// + /// Panics if the new capacity exceeds `isize::MAX` bytes. + /// + /// # Examples + /// + /// ``` + /// let mut vec = vec![1]; + /// vec.reserve(10); + /// assert!(vec.capacity() >= 11); + /// ``` + #[cfg(not(no_global_oom_handling))] + #[stable(feature = "rust1", since = "1.0.0")] + pub fn reserve(&mut self, additional: usize) { + self.buf.reserve(self.len, additional); + } + + /// Reserves the minimum capacity for exactly `additional` more elements to + /// be inserted in the given `Vec`. After calling `reserve_exact`, + /// capacity will be greater than or equal to `self.len() + additional`. + /// Does nothing if the capacity is already sufficient. + /// + /// Note that the allocator may give the collection more space than it + /// requests. Therefore, capacity can not be relied upon to be precisely + /// minimal. Prefer [`reserve`] if future insertions are expected. + /// + /// [`reserve`]: Vec::reserve + /// + /// # Panics + /// + /// Panics if the new capacity exceeds `isize::MAX` bytes. + /// + /// # Examples + /// + /// ``` + /// let mut vec = vec![1]; + /// vec.reserve_exact(10); + /// assert!(vec.capacity() >= 11); + /// ``` + #[cfg(not(no_global_oom_handling))] + #[stable(feature = "rust1", since = "1.0.0")] + pub fn reserve_exact(&mut self, additional: usize) { + self.buf.reserve_exact(self.len, additional); + } + + /// Tries to reserve capacity for at least `additional` more elements to be inserted + /// in the given `Vec`. The collection may reserve more space to avoid + /// frequent reallocations. After calling `try_reserve`, capacity will be + /// greater than or equal to `self.len() + additional`. Does nothing if + /// capacity is already sufficient. + /// + /// # Errors + /// + /// If the capacity overflows, or the allocator reports a failure, then an error + /// is returned. + /// + /// # Examples + /// + /// ``` + /// use std::collections::TryReserveError; + /// + /// fn process_data(data: &[u32]) -> Result, TryReserveError> { + /// let mut output = Vec::new(); + /// + /// // Pre-reserve the memory, exiting if we can't + /// output.try_reserve(data.len())?; + /// + /// // Now we know this can't OOM in the middle of our complex work + /// output.extend(data.iter().map(|&val| { + /// val * 2 + 5 // very complicated + /// })); + /// + /// Ok(output) + /// } + /// # process_data(&[1, 2, 3]).expect("why is the test harness OOMing on 12 bytes?"); + /// ``` + #[stable(feature = "try_reserve", since = "1.57.0")] + pub fn try_reserve(&mut self, additional: usize) -> Result<(), TryReserveError> { + self.buf.try_reserve(self.len, additional) + } + + /// Tries to reserve the minimum capacity for exactly `additional` + /// elements to be inserted in the given `Vec`. After calling + /// `try_reserve_exact`, capacity will be greater than or equal to + /// `self.len() + additional` if it returns `Ok(())`. + /// Does nothing if the capacity is already sufficient. + /// + /// Note that the allocator may give the collection more space than it + /// requests. Therefore, capacity can not be relied upon to be precisely + /// minimal. Prefer [`try_reserve`] if future insertions are expected. + /// + /// [`try_reserve`]: Vec::try_reserve + /// + /// # Errors + /// + /// If the capacity overflows, or the allocator reports a failure, then an error + /// is returned. + /// + /// # Examples + /// + /// ``` + /// use std::collections::TryReserveError; + /// + /// fn process_data(data: &[u32]) -> Result, TryReserveError> { + /// let mut output = Vec::new(); + /// + /// // Pre-reserve the memory, exiting if we can't + /// output.try_reserve_exact(data.len())?; + /// + /// // Now we know this can't OOM in the middle of our complex work + /// output.extend(data.iter().map(|&val| { + /// val * 2 + 5 // very complicated + /// })); + /// + /// Ok(output) + /// } + /// # process_data(&[1, 2, 3]).expect("why is the test harness OOMing on 12 bytes?"); + /// ``` + #[stable(feature = "try_reserve", since = "1.57.0")] + pub fn try_reserve_exact(&mut self, additional: usize) -> Result<(), TryReserveError> { + self.buf.try_reserve_exact(self.len, additional) + } + + /// Shrinks the capacity of the vector as much as possible. + /// + /// It will drop down as close as possible to the length but the allocator + /// may still inform the vector that there is space for a few more elements. + /// + /// # Examples + /// + /// ``` + /// let mut vec = Vec::with_capacity(10); + /// vec.extend([1, 2, 3]); + /// assert_eq!(vec.capacity(), 10); + /// vec.shrink_to_fit(); + /// assert!(vec.capacity() >= 3); + /// ``` + #[cfg(not(no_global_oom_handling))] + #[stable(feature = "rust1", since = "1.0.0")] + pub fn shrink_to_fit(&mut self) { + // The capacity is never less than the length, and there's nothing to do when + // they are equal, so we can avoid the panic case in `RawVec::shrink_to_fit` + // by only calling it with a greater capacity. + if self.capacity() > self.len { + self.buf.shrink_to_fit(self.len); + } + } + + /// Shrinks the capacity of the vector with a lower bound. + /// + /// The capacity will remain at least as large as both the length + /// and the supplied value. + /// + /// If the current capacity is less than the lower limit, this is a no-op. + /// + /// # Examples + /// + /// ``` + /// let mut vec = Vec::with_capacity(10); + /// vec.extend([1, 2, 3]); + /// assert_eq!(vec.capacity(), 10); + /// vec.shrink_to(4); + /// assert!(vec.capacity() >= 4); + /// vec.shrink_to(0); + /// assert!(vec.capacity() >= 3); + /// ``` + #[cfg(not(no_global_oom_handling))] + #[stable(feature = "shrink_to", since = "1.56.0")] + pub fn shrink_to(&mut self, min_capacity: usize) { + if self.capacity() > min_capacity { + self.buf.shrink_to_fit(cmp::max(self.len, min_capacity)); + } + } + + /// Converts the vector into [`Box<[T]>`][owned slice]. + /// + /// Note that this will drop any excess capacity. + /// + /// [owned slice]: Box + /// + /// # Examples + /// + /// ``` + /// let v = vec![1, 2, 3]; + /// + /// let slice = v.into_boxed_slice(); + /// ``` + /// + /// Any excess capacity is removed: + /// + /// ``` + /// let mut vec = Vec::with_capacity(10); + /// vec.extend([1, 2, 3]); + /// + /// assert_eq!(vec.capacity(), 10); + /// let slice = vec.into_boxed_slice(); + /// assert_eq!(slice.into_vec().capacity(), 3); + /// ``` + #[cfg(not(no_global_oom_handling))] + #[stable(feature = "rust1", since = "1.0.0")] + pub fn into_boxed_slice(mut self) -> Box<[T], A> { + unsafe { + self.shrink_to_fit(); + let me = ManuallyDrop::new(self); + let buf = ptr::read(&me.buf); + let len = me.len(); + buf.into_box(len).assume_init() + } + } + + /// Shortens the vector, keeping the first `len` elements and dropping + /// the rest. + /// + /// If `len` is greater than the vector's current length, this has no + /// effect. + /// + /// The [`drain`] method can emulate `truncate`, but causes the excess + /// elements to be returned instead of dropped. + /// + /// Note that this method has no effect on the allocated capacity + /// of the vector. + /// + /// # Examples + /// + /// Truncating a five element vector to two elements: + /// + /// ``` + /// let mut vec = vec![1, 2, 3, 4, 5]; + /// vec.truncate(2); + /// assert_eq!(vec, [1, 2]); + /// ``` + /// + /// No truncation occurs when `len` is greater than the vector's current + /// length: + /// + /// ``` + /// let mut vec = vec![1, 2, 3]; + /// vec.truncate(8); + /// assert_eq!(vec, [1, 2, 3]); + /// ``` + /// + /// Truncating when `len == 0` is equivalent to calling the [`clear`] + /// method. + /// + /// ``` + /// let mut vec = vec![1, 2, 3]; + /// vec.truncate(0); + /// assert_eq!(vec, []); + /// ``` + /// + /// [`clear`]: Vec::clear + /// [`drain`]: Vec::drain + #[stable(feature = "rust1", since = "1.0.0")] + pub fn truncate(&mut self, len: usize) { + // This is safe because: + // + // * the slice passed to `drop_in_place` is valid; the `len > self.len` + // case avoids creating an invalid slice, and + // * the `len` of the vector is shrunk before calling `drop_in_place`, + // such that no value will be dropped twice in case `drop_in_place` + // were to panic once (if it panics twice, the program aborts). + unsafe { + // Note: It's intentional that this is `>` and not `>=`. + // Changing it to `>=` has negative performance + // implications in some cases. See #78884 for more. + if len > self.len { + return; + } + let remaining_len = self.len - len; + let s = ptr::slice_from_raw_parts_mut(self.as_mut_ptr().add(len), remaining_len); + self.len = len; + ptr::drop_in_place(s); + } + } + + /// Extracts a slice containing the entire vector. + /// + /// Equivalent to `&s[..]`. + /// + /// # Examples + /// + /// ``` + /// use std::io::{self, Write}; + /// let buffer = vec![1, 2, 3, 5, 8]; + /// io::sink().write(buffer.as_slice()).unwrap(); + /// ``` + #[inline] + #[stable(feature = "vec_as_slice", since = "1.7.0")] + pub fn as_slice(&self) -> &[T] { + self + } + + /// Extracts a mutable slice of the entire vector. + /// + /// Equivalent to `&mut s[..]`. + /// + /// # Examples + /// + /// ``` + /// use std::io::{self, Read}; + /// let mut buffer = vec![0; 3]; + /// io::repeat(0b101).read_exact(buffer.as_mut_slice()).unwrap(); + /// ``` + #[inline] + #[stable(feature = "vec_as_slice", since = "1.7.0")] + pub fn as_mut_slice(&mut self) -> &mut [T] { + self + } + + /// Returns a raw pointer to the vector's buffer. + /// + /// The caller must ensure that the vector outlives the pointer this + /// function returns, or else it will end up pointing to garbage. + /// Modifying the vector may cause its buffer to be reallocated, + /// which would also make any pointers to it invalid. + /// + /// The caller must also ensure that the memory the pointer (non-transitively) points to + /// is never written to (except inside an `UnsafeCell`) using this pointer or any pointer + /// derived from it. If you need to mutate the contents of the slice, use [`as_mut_ptr`]. + /// + /// # Examples + /// + /// ``` + /// let x = vec![1, 2, 4]; + /// let x_ptr = x.as_ptr(); + /// + /// unsafe { + /// for i in 0..x.len() { + /// assert_eq!(*x_ptr.add(i), 1 << i); + /// } + /// } + /// ``` + /// + /// [`as_mut_ptr`]: Vec::as_mut_ptr + #[stable(feature = "vec_as_ptr", since = "1.37.0")] + #[inline] + pub fn as_ptr(&self) -> *const T { + // We shadow the slice method of the same name to avoid going through + // `deref`, which creates an intermediate reference. + let ptr = self.buf.ptr(); + unsafe { + assume(!ptr.is_null()); + } + ptr + } + + /// Returns an unsafe mutable pointer to the vector's buffer. + /// + /// The caller must ensure that the vector outlives the pointer this + /// function returns, or else it will end up pointing to garbage. + /// Modifying the vector may cause its buffer to be reallocated, + /// which would also make any pointers to it invalid. + /// + /// # Examples + /// + /// ``` + /// // Allocate vector big enough for 4 elements. + /// let size = 4; + /// let mut x: Vec = Vec::with_capacity(size); + /// let x_ptr = x.as_mut_ptr(); + /// + /// // Initialize elements via raw pointer writes, then set length. + /// unsafe { + /// for i in 0..size { + /// *x_ptr.add(i) = i as i32; + /// } + /// x.set_len(size); + /// } + /// assert_eq!(&*x, &[0, 1, 2, 3]); + /// ``` + #[stable(feature = "vec_as_ptr", since = "1.37.0")] + #[inline] + pub fn as_mut_ptr(&mut self) -> *mut T { + // We shadow the slice method of the same name to avoid going through + // `deref_mut`, which creates an intermediate reference. + let ptr = self.buf.ptr(); + unsafe { + assume(!ptr.is_null()); + } + ptr + } + + /// Returns a reference to the underlying allocator. + #[unstable(feature = "allocator_api", issue = "32838")] + #[inline] + pub fn allocator(&self) -> &A { + self.buf.allocator() + } + + /// Forces the length of the vector to `new_len`. + /// + /// This is a low-level operation that maintains none of the normal + /// invariants of the type. Normally changing the length of a vector + /// is done using one of the safe operations instead, such as + /// [`truncate`], [`resize`], [`extend`], or [`clear`]. + /// + /// [`truncate`]: Vec::truncate + /// [`resize`]: Vec::resize + /// [`extend`]: Extend::extend + /// [`clear`]: Vec::clear + /// + /// # Safety + /// + /// - `new_len` must be less than or equal to [`capacity()`]. + /// - The elements at `old_len..new_len` must be initialized. + /// + /// [`capacity()`]: Vec::capacity + /// + /// # Examples + /// + /// This method can be useful for situations in which the vector + /// is serving as a buffer for other code, particularly over FFI: + /// + /// ```no_run + /// # #![allow(dead_code)] + /// # // This is just a minimal skeleton for the doc example; + /// # // don't use this as a starting point for a real library. + /// # pub struct StreamWrapper { strm: *mut std::ffi::c_void } + /// # const Z_OK: i32 = 0; + /// # extern "C" { + /// # fn deflateGetDictionary( + /// # strm: *mut std::ffi::c_void, + /// # dictionary: *mut u8, + /// # dictLength: *mut usize, + /// # ) -> i32; + /// # } + /// # impl StreamWrapper { + /// pub fn get_dictionary(&self) -> Option> { + /// // Per the FFI method's docs, "32768 bytes is always enough". + /// let mut dict = Vec::with_capacity(32_768); + /// let mut dict_length = 0; + /// // SAFETY: When `deflateGetDictionary` returns `Z_OK`, it holds that: + /// // 1. `dict_length` elements were initialized. + /// // 2. `dict_length` <= the capacity (32_768) + /// // which makes `set_len` safe to call. + /// unsafe { + /// // Make the FFI call... + /// let r = deflateGetDictionary(self.strm, dict.as_mut_ptr(), &mut dict_length); + /// if r == Z_OK { + /// // ...and update the length to what was initialized. + /// dict.set_len(dict_length); + /// Some(dict) + /// } else { + /// None + /// } + /// } + /// } + /// # } + /// ``` + /// + /// While the following example is sound, there is a memory leak since + /// the inner vectors were not freed prior to the `set_len` call: + /// + /// ``` + /// let mut vec = vec![vec![1, 0, 0], + /// vec![0, 1, 0], + /// vec![0, 0, 1]]; + /// // SAFETY: + /// // 1. `old_len..0` is empty so no elements need to be initialized. + /// // 2. `0 <= capacity` always holds whatever `capacity` is. + /// unsafe { + /// vec.set_len(0); + /// } + /// ``` + /// + /// Normally, here, one would use [`clear`] instead to correctly drop + /// the contents and thus not leak memory. + #[inline] + #[stable(feature = "rust1", since = "1.0.0")] + pub unsafe fn set_len(&mut self, new_len: usize) { + debug_assert!(new_len <= self.capacity()); + + self.len = new_len; + } + + /// Removes an element from the vector and returns it. + /// + /// The removed element is replaced by the last element of the vector. + /// + /// This does not preserve ordering, but is *O*(1). + /// If you need to preserve the element order, use [`remove`] instead. + /// + /// [`remove`]: Vec::remove + /// + /// # Panics + /// + /// Panics if `index` is out of bounds. + /// + /// # Examples + /// + /// ``` + /// let mut v = vec!["foo", "bar", "baz", "qux"]; + /// + /// assert_eq!(v.swap_remove(1), "bar"); + /// assert_eq!(v, ["foo", "qux", "baz"]); + /// + /// assert_eq!(v.swap_remove(0), "foo"); + /// assert_eq!(v, ["baz", "qux"]); + /// ``` + #[inline] + #[stable(feature = "rust1", since = "1.0.0")] + pub fn swap_remove(&mut self, index: usize) -> T { + #[cold] + #[inline(never)] + fn assert_failed(index: usize, len: usize) -> ! { + panic!("swap_remove index (is {index}) should be < len (is {len})"); + } + + let len = self.len(); + if index >= len { + assert_failed(index, len); + } + unsafe { + // We replace self[index] with the last element. Note that if the + // bounds check above succeeds there must be a last element (which + // can be self[index] itself). + let value = ptr::read(self.as_ptr().add(index)); + let base_ptr = self.as_mut_ptr(); + ptr::copy(base_ptr.add(len - 1), base_ptr.add(index), 1); + self.set_len(len - 1); + value + } + } + + /// Inserts an element at position `index` within the vector, shifting all + /// elements after it to the right. + /// + /// # Panics + /// + /// Panics if `index > len`. + /// + /// # Examples + /// + /// ``` + /// let mut vec = vec![1, 2, 3]; + /// vec.insert(1, 4); + /// assert_eq!(vec, [1, 4, 2, 3]); + /// vec.insert(4, 5); + /// assert_eq!(vec, [1, 4, 2, 3, 5]); + /// ``` + #[cfg(not(no_global_oom_handling))] + #[stable(feature = "rust1", since = "1.0.0")] + pub fn insert(&mut self, index: usize, element: T) { + #[cold] + #[inline(never)] + fn assert_failed(index: usize, len: usize) -> ! { + panic!("insertion index (is {index}) should be <= len (is {len})"); + } + + let len = self.len(); + if index > len { + assert_failed(index, len); + } + + // space for the new element + if len == self.buf.capacity() { + self.reserve(1); + } + + unsafe { + // infallible + // The spot to put the new value + { + let p = self.as_mut_ptr().add(index); + // Shift everything over to make space. (Duplicating the + // `index`th element into two consecutive places.) + ptr::copy(p, p.offset(1), len - index); + // Write it in, overwriting the first copy of the `index`th + // element. + ptr::write(p, element); + } + self.set_len(len + 1); + } + } + + /// Removes and returns the element at position `index` within the vector, + /// shifting all elements after it to the left. + /// + /// Note: Because this shifts over the remaining elements, it has a + /// worst-case performance of *O*(*n*). If you don't need the order of elements + /// to be preserved, use [`swap_remove`] instead. If you'd like to remove + /// elements from the beginning of the `Vec`, consider using + /// [`VecDeque::pop_front`] instead. + /// + /// [`swap_remove`]: Vec::swap_remove + /// [`VecDeque::pop_front`]: crate::collections::VecDeque::pop_front + /// + /// # Panics + /// + /// Panics if `index` is out of bounds. + /// + /// # Examples + /// + /// ``` + /// let mut v = vec![1, 2, 3]; + /// assert_eq!(v.remove(1), 2); + /// assert_eq!(v, [1, 3]); + /// ``` + #[stable(feature = "rust1", since = "1.0.0")] + #[track_caller] + pub fn remove(&mut self, index: usize) -> T { + #[cold] + #[inline(never)] + #[track_caller] + fn assert_failed(index: usize, len: usize) -> ! { + panic!("removal index (is {index}) should be < len (is {len})"); + } + + let len = self.len(); + if index >= len { + assert_failed(index, len); + } + unsafe { + // infallible + let ret; + { + // the place we are taking from. + let ptr = self.as_mut_ptr().add(index); + // copy it out, unsafely having a copy of the value on + // the stack and in the vector at the same time. + ret = ptr::read(ptr); + + // Shift everything down to fill in that spot. + ptr::copy(ptr.offset(1), ptr, len - index - 1); + } + self.set_len(len - 1); + ret + } + } + + /// Retains only the elements specified by the predicate. + /// + /// In other words, remove all elements `e` for which `f(&e)` returns `false`. + /// This method operates in place, visiting each element exactly once in the + /// original order, and preserves the order of the retained elements. + /// + /// # Examples + /// + /// ``` + /// let mut vec = vec![1, 2, 3, 4]; + /// vec.retain(|&x| x % 2 == 0); + /// assert_eq!(vec, [2, 4]); + /// ``` + /// + /// Because the elements are visited exactly once in the original order, + /// external state may be used to decide which elements to keep. + /// + /// ``` + /// let mut vec = vec![1, 2, 3, 4, 5]; + /// let keep = [false, true, true, false, true]; + /// let mut iter = keep.iter(); + /// vec.retain(|_| *iter.next().unwrap()); + /// assert_eq!(vec, [2, 3, 5]); + /// ``` + #[stable(feature = "rust1", since = "1.0.0")] + pub fn retain(&mut self, mut f: F) + where + F: FnMut(&T) -> bool, + { + self.retain_mut(|elem| f(elem)); + } + + /// Retains only the elements specified by the predicate, passing a mutable reference to it. + /// + /// In other words, remove all elements `e` such that `f(&mut e)` returns `false`. + /// This method operates in place, visiting each element exactly once in the + /// original order, and preserves the order of the retained elements. + /// + /// # Examples + /// + /// ``` + /// let mut vec = vec![1, 2, 3, 4]; + /// vec.retain_mut(|x| if *x > 3 { + /// false + /// } else { + /// *x += 1; + /// true + /// }); + /// assert_eq!(vec, [2, 3, 4]); + /// ``` + #[stable(feature = "vec_retain_mut", since = "1.61.0")] + pub fn retain_mut(&mut self, mut f: F) + where + F: FnMut(&mut T) -> bool, + { + let original_len = self.len(); + // Avoid double drop if the drop guard is not executed, + // since we may make some holes during the process. + unsafe { self.set_len(0) }; + + // Vec: [Kept, Kept, Hole, Hole, Hole, Hole, Unchecked, Unchecked] + // |<- processed len ->| ^- next to check + // |<- deleted cnt ->| + // |<- original_len ->| + // Kept: Elements which predicate returns true on. + // Hole: Moved or dropped element slot. + // Unchecked: Unchecked valid elements. + // + // This drop guard will be invoked when predicate or `drop` of element panicked. + // It shifts unchecked elements to cover holes and `set_len` to the correct length. + // In cases when predicate and `drop` never panick, it will be optimized out. + struct BackshiftOnDrop<'a, T, A: Allocator> { + v: &'a mut Vec, + processed_len: usize, + deleted_cnt: usize, + original_len: usize, + } + + impl Drop for BackshiftOnDrop<'_, T, A> { + fn drop(&mut self) { + if self.deleted_cnt > 0 { + // SAFETY: Trailing unchecked items must be valid since we never touch them. + unsafe { + ptr::copy( + self.v.as_ptr().add(self.processed_len), + self.v.as_mut_ptr().add(self.processed_len - self.deleted_cnt), + self.original_len - self.processed_len, + ); + } + } + // SAFETY: After filling holes, all items are in contiguous memory. + unsafe { + self.v.set_len(self.original_len - self.deleted_cnt); + } + } + } + + let mut g = BackshiftOnDrop { v: self, processed_len: 0, deleted_cnt: 0, original_len }; + + fn process_loop( + original_len: usize, + f: &mut F, + g: &mut BackshiftOnDrop<'_, T, A>, + ) where + F: FnMut(&mut T) -> bool, + { + while g.processed_len != original_len { + // SAFETY: Unchecked element must be valid. + let cur = unsafe { &mut *g.v.as_mut_ptr().add(g.processed_len) }; + if !f(cur) { + // Advance early to avoid double drop if `drop_in_place` panicked. + g.processed_len += 1; + g.deleted_cnt += 1; + // SAFETY: We never touch this element again after dropped. + unsafe { ptr::drop_in_place(cur) }; + // We already advanced the counter. + if DELETED { + continue; + } else { + break; + } + } + if DELETED { + // SAFETY: `deleted_cnt` > 0, so the hole slot must not overlap with current element. + // We use copy for move, and never touch this element again. + unsafe { + let hole_slot = g.v.as_mut_ptr().add(g.processed_len - g.deleted_cnt); + ptr::copy_nonoverlapping(cur, hole_slot, 1); + } + } + g.processed_len += 1; + } + } + + // Stage 1: Nothing was deleted. + process_loop::(original_len, &mut f, &mut g); + + // Stage 2: Some elements were deleted. + process_loop::(original_len, &mut f, &mut g); + + // All item are processed. This can be optimized to `set_len` by LLVM. + drop(g); + } + + /// Removes all but the first of consecutive elements in the vector that resolve to the same + /// key. + /// + /// If the vector is sorted, this removes all duplicates. + /// + /// # Examples + /// + /// ``` + /// let mut vec = vec![10, 20, 21, 30, 20]; + /// + /// vec.dedup_by_key(|i| *i / 10); + /// + /// assert_eq!(vec, [10, 20, 30, 20]); + /// ``` + #[stable(feature = "dedup_by", since = "1.16.0")] + #[inline] + pub fn dedup_by_key(&mut self, mut key: F) + where + F: FnMut(&mut T) -> K, + K: PartialEq, + { + self.dedup_by(|a, b| key(a) == key(b)) + } + + /// Removes all but the first of consecutive elements in the vector satisfying a given equality + /// relation. + /// + /// The `same_bucket` function is passed references to two elements from the vector and + /// must determine if the elements compare equal. The elements are passed in opposite order + /// from their order in the slice, so if `same_bucket(a, b)` returns `true`, `a` is removed. + /// + /// If the vector is sorted, this removes all duplicates. + /// + /// # Examples + /// + /// ``` + /// let mut vec = vec!["foo", "bar", "Bar", "baz", "bar"]; + /// + /// vec.dedup_by(|a, b| a.eq_ignore_ascii_case(b)); + /// + /// assert_eq!(vec, ["foo", "bar", "baz", "bar"]); + /// ``` + #[stable(feature = "dedup_by", since = "1.16.0")] + pub fn dedup_by(&mut self, mut same_bucket: F) + where + F: FnMut(&mut T, &mut T) -> bool, + { + let len = self.len(); + if len <= 1 { + return; + } + + /* INVARIANT: vec.len() > read >= write > write-1 >= 0 */ + struct FillGapOnDrop<'a, T, A: core::alloc::Allocator> { + /* Offset of the element we want to check if it is duplicate */ + read: usize, + + /* Offset of the place where we want to place the non-duplicate + * when we find it. */ + write: usize, + + /* The Vec that would need correction if `same_bucket` panicked */ + vec: &'a mut Vec, + } + + impl<'a, T, A: core::alloc::Allocator> Drop for FillGapOnDrop<'a, T, A> { + fn drop(&mut self) { + /* This code gets executed when `same_bucket` panics */ + + /* SAFETY: invariant guarantees that `read - write` + * and `len - read` never overflow and that the copy is always + * in-bounds. */ + unsafe { + let ptr = self.vec.as_mut_ptr(); + let len = self.vec.len(); + + /* How many items were left when `same_bucket` panicked. + * Basically vec[read..].len() */ + let items_left = len.wrapping_sub(self.read); + + /* Pointer to first item in vec[write..write+items_left] slice */ + let dropped_ptr = ptr.add(self.write); + /* Pointer to first item in vec[read..] slice */ + let valid_ptr = ptr.add(self.read); + + /* Copy `vec[read..]` to `vec[write..write+items_left]`. + * The slices can overlap, so `copy_nonoverlapping` cannot be used */ + ptr::copy(valid_ptr, dropped_ptr, items_left); + + /* How many items have been already dropped + * Basically vec[read..write].len() */ + let dropped = self.read.wrapping_sub(self.write); + + self.vec.set_len(len - dropped); + } + } + } + + let mut gap = FillGapOnDrop { read: 1, write: 1, vec: self }; + let ptr = gap.vec.as_mut_ptr(); + + /* Drop items while going through Vec, it should be more efficient than + * doing slice partition_dedup + truncate */ + + /* SAFETY: Because of the invariant, read_ptr, prev_ptr and write_ptr + * are always in-bounds and read_ptr never aliases prev_ptr */ + unsafe { + while gap.read < len { + let read_ptr = ptr.add(gap.read); + let prev_ptr = ptr.add(gap.write.wrapping_sub(1)); + + if same_bucket(&mut *read_ptr, &mut *prev_ptr) { + // Increase `gap.read` now since the drop may panic. + gap.read += 1; + /* We have found duplicate, drop it in-place */ + ptr::drop_in_place(read_ptr); + } else { + let write_ptr = ptr.add(gap.write); + + /* Because `read_ptr` can be equal to `write_ptr`, we either + * have to use `copy` or conditional `copy_nonoverlapping`. + * Looks like the first option is faster. */ + ptr::copy(read_ptr, write_ptr, 1); + + /* We have filled that place, so go further */ + gap.write += 1; + gap.read += 1; + } + } + + /* Technically we could let `gap` clean up with its Drop, but + * when `same_bucket` is guaranteed to not panic, this bloats a little + * the codegen, so we just do it manually */ + gap.vec.set_len(gap.write); + mem::forget(gap); + } + } + + /// Appends an element to the back of a collection. + /// + /// # Panics + /// + /// Panics if the new capacity exceeds `isize::MAX` bytes. + /// + /// # Examples + /// + /// ``` + /// let mut vec = vec![1, 2]; + /// vec.push(3); + /// assert_eq!(vec, [1, 2, 3]); + /// ``` + #[cfg(not(no_global_oom_handling))] + #[inline] + #[stable(feature = "rust1", since = "1.0.0")] + pub fn push(&mut self, value: T) { + // This will panic or abort if we would allocate > isize::MAX bytes + // or if the length increment would overflow for zero-sized types. + if self.len == self.buf.capacity() { + self.buf.reserve_for_push(self.len); + } + unsafe { + let end = self.as_mut_ptr().add(self.len); + ptr::write(end, value); + self.len += 1; + } + } + + /// Tries to append an element to the back of a collection. + /// + /// # Examples + /// + /// ``` + /// let mut vec = vec![1, 2]; + /// vec.try_push(3).unwrap(); + /// assert_eq!(vec, [1, 2, 3]); + /// ``` + #[inline] + #[stable(feature = "kernel", since = "1.0.0")] + pub fn try_push(&mut self, value: T) -> Result<(), TryReserveError> { + if self.len == self.buf.capacity() { + self.buf.try_reserve_for_push(self.len)?; + } + unsafe { + let end = self.as_mut_ptr().add(self.len); + ptr::write(end, value); + self.len += 1; + } + Ok(()) + } + + /// Removes the last element from a vector and returns it, or [`None`] if it + /// is empty. + /// + /// If you'd like to pop the first element, consider using + /// [`VecDeque::pop_front`] instead. + /// + /// [`VecDeque::pop_front`]: crate::collections::VecDeque::pop_front + /// + /// # Examples + /// + /// ``` + /// let mut vec = vec![1, 2, 3]; + /// assert_eq!(vec.pop(), Some(3)); + /// assert_eq!(vec, [1, 2]); + /// ``` + #[inline] + #[stable(feature = "rust1", since = "1.0.0")] + pub fn pop(&mut self) -> Option { + if self.len == 0 { + None + } else { + unsafe { + self.len -= 1; + Some(ptr::read(self.as_ptr().add(self.len()))) + } + } + } + + /// Moves all the elements of `other` into `self`, leaving `other` empty. + /// + /// # Panics + /// + /// Panics if the number of elements in the vector overflows a `usize`. + /// + /// # Examples + /// + /// ``` + /// let mut vec = vec![1, 2, 3]; + /// let mut vec2 = vec![4, 5, 6]; + /// vec.append(&mut vec2); + /// assert_eq!(vec, [1, 2, 3, 4, 5, 6]); + /// assert_eq!(vec2, []); + /// ``` + #[cfg(not(no_global_oom_handling))] + #[inline] + #[stable(feature = "append", since = "1.4.0")] + pub fn append(&mut self, other: &mut Self) { + unsafe { + self.append_elements(other.as_slice() as _); + other.set_len(0); + } + } + + /// Appends elements to `self` from other buffer. + #[cfg(not(no_global_oom_handling))] + #[inline] + unsafe fn append_elements(&mut self, other: *const [T]) { + let count = unsafe { (*other).len() }; + self.reserve(count); + let len = self.len(); + unsafe { ptr::copy_nonoverlapping(other as *const T, self.as_mut_ptr().add(len), count) }; + self.len += count; + } + + /// Removes the specified range from the vector in bulk, returning all + /// removed elements as an iterator. If the iterator is dropped before + /// being fully consumed, it drops the remaining removed elements. + /// + /// The returned iterator keeps a mutable borrow on the vector to optimize + /// its implementation. + /// + /// # Panics + /// + /// Panics if the starting point is greater than the end point or if + /// the end point is greater than the length of the vector. + /// + /// # Leaking + /// + /// If the returned iterator goes out of scope without being dropped (due to + /// [`mem::forget`], for example), the vector may have lost and leaked + /// elements arbitrarily, including elements outside the range. + /// + /// # Examples + /// + /// ``` + /// let mut v = vec![1, 2, 3]; + /// let u: Vec<_> = v.drain(1..).collect(); + /// assert_eq!(v, &[1]); + /// assert_eq!(u, &[2, 3]); + /// + /// // A full range clears the vector, like `clear()` does + /// v.drain(..); + /// assert_eq!(v, &[]); + /// ``` + #[stable(feature = "drain", since = "1.6.0")] + pub fn drain(&mut self, range: R) -> Drain<'_, T, A> + where + R: RangeBounds, + { + // Memory safety + // + // When the Drain is first created, it shortens the length of + // the source vector to make sure no uninitialized or moved-from elements + // are accessible at all if the Drain's destructor never gets to run. + // + // Drain will ptr::read out the values to remove. + // When finished, remaining tail of the vec is copied back to cover + // the hole, and the vector length is restored to the new length. + // + let len = self.len(); + let Range { start, end } = slice::range(range, ..len); + + unsafe { + // set self.vec length's to start, to be safe in case Drain is leaked + self.set_len(start); + // Use the borrow in the IterMut to indicate borrowing behavior of the + // whole Drain iterator (like &mut T). + let range_slice = slice::from_raw_parts_mut(self.as_mut_ptr().add(start), end - start); + Drain { + tail_start: end, + tail_len: len - end, + iter: range_slice.iter(), + vec: NonNull::from(self), + } + } + } + + /// Clears the vector, removing all values. + /// + /// Note that this method has no effect on the allocated capacity + /// of the vector. + /// + /// # Examples + /// + /// ``` + /// let mut v = vec![1, 2, 3]; + /// + /// v.clear(); + /// + /// assert!(v.is_empty()); + /// ``` + #[inline] + #[stable(feature = "rust1", since = "1.0.0")] + pub fn clear(&mut self) { + let elems: *mut [T] = self.as_mut_slice(); + + // SAFETY: + // - `elems` comes directly from `as_mut_slice` and is therefore valid. + // - Setting `self.len` before calling `drop_in_place` means that, + // if an element's `Drop` impl panics, the vector's `Drop` impl will + // do nothing (leaking the rest of the elements) instead of dropping + // some twice. + unsafe { + self.len = 0; + ptr::drop_in_place(elems); + } + } + + /// Returns the number of elements in the vector, also referred to + /// as its 'length'. + /// + /// # Examples + /// + /// ``` + /// let a = vec![1, 2, 3]; + /// assert_eq!(a.len(), 3); + /// ``` + #[inline] + #[stable(feature = "rust1", since = "1.0.0")] + pub fn len(&self) -> usize { + self.len + } + + /// Returns `true` if the vector contains no elements. + /// + /// # Examples + /// + /// ``` + /// let mut v = Vec::new(); + /// assert!(v.is_empty()); + /// + /// v.push(1); + /// assert!(!v.is_empty()); + /// ``` + #[stable(feature = "rust1", since = "1.0.0")] + pub fn is_empty(&self) -> bool { + self.len() == 0 + } + + /// Splits the collection into two at the given index. + /// + /// Returns a newly allocated vector containing the elements in the range + /// `[at, len)`. After the call, the original vector will be left containing + /// the elements `[0, at)` with its previous capacity unchanged. + /// + /// # Panics + /// + /// Panics if `at > len`. + /// + /// # Examples + /// + /// ``` + /// let mut vec = vec![1, 2, 3]; + /// let vec2 = vec.split_off(1); + /// assert_eq!(vec, [1]); + /// assert_eq!(vec2, [2, 3]); + /// ``` + #[cfg(not(no_global_oom_handling))] + #[inline] + #[must_use = "use `.truncate()` if you don't need the other half"] + #[stable(feature = "split_off", since = "1.4.0")] + pub fn split_off(&mut self, at: usize) -> Self + where + A: Clone, + { + #[cold] + #[inline(never)] + fn assert_failed(at: usize, len: usize) -> ! { + panic!("`at` split index (is {at}) should be <= len (is {len})"); + } + + if at > self.len() { + assert_failed(at, self.len()); + } + + if at == 0 { + // the new vector can take over the original buffer and avoid the copy + return mem::replace( + self, + Vec::with_capacity_in(self.capacity(), self.allocator().clone()), + ); + } + + let other_len = self.len - at; + let mut other = Vec::with_capacity_in(other_len, self.allocator().clone()); + + // Unsafely `set_len` and copy items to `other`. + unsafe { + self.set_len(at); + other.set_len(other_len); + + ptr::copy_nonoverlapping(self.as_ptr().add(at), other.as_mut_ptr(), other.len()); + } + other + } + + /// Resizes the `Vec` in-place so that `len` is equal to `new_len`. + /// + /// If `new_len` is greater than `len`, the `Vec` is extended by the + /// difference, with each additional slot filled with the result of + /// calling the closure `f`. The return values from `f` will end up + /// in the `Vec` in the order they have been generated. + /// + /// If `new_len` is less than `len`, the `Vec` is simply truncated. + /// + /// This method uses a closure to create new values on every push. If + /// you'd rather [`Clone`] a given value, use [`Vec::resize`]. If you + /// want to use the [`Default`] trait to generate values, you can + /// pass [`Default::default`] as the second argument. + /// + /// # Examples + /// + /// ``` + /// let mut vec = vec![1, 2, 3]; + /// vec.resize_with(5, Default::default); + /// assert_eq!(vec, [1, 2, 3, 0, 0]); + /// + /// let mut vec = vec![]; + /// let mut p = 1; + /// vec.resize_with(4, || { p *= 2; p }); + /// assert_eq!(vec, [2, 4, 8, 16]); + /// ``` + #[cfg(not(no_global_oom_handling))] + #[stable(feature = "vec_resize_with", since = "1.33.0")] + pub fn resize_with(&mut self, new_len: usize, f: F) + where + F: FnMut() -> T, + { + let len = self.len(); + if new_len > len { + self.extend_with(new_len - len, ExtendFunc(f)); + } else { + self.truncate(new_len); + } + } + + /// Consumes and leaks the `Vec`, returning a mutable reference to the contents, + /// `&'a mut [T]`. Note that the type `T` must outlive the chosen lifetime + /// `'a`. If the type has only static references, or none at all, then this + /// may be chosen to be `'static`. + /// + /// As of Rust 1.57, this method does not reallocate or shrink the `Vec`, + /// so the leaked allocation may include unused capacity that is not part + /// of the returned slice. + /// + /// This function is mainly useful for data that lives for the remainder of + /// the program's life. Dropping the returned reference will cause a memory + /// leak. + /// + /// # Examples + /// + /// Simple usage: + /// + /// ``` + /// let x = vec![1, 2, 3]; + /// let static_ref: &'static mut [usize] = x.leak(); + /// static_ref[0] += 1; + /// assert_eq!(static_ref, &[2, 2, 3]); + /// ``` + #[cfg(not(no_global_oom_handling))] + #[stable(feature = "vec_leak", since = "1.47.0")] + #[inline] + pub fn leak<'a>(self) -> &'a mut [T] + where + A: 'a, + { + let mut me = ManuallyDrop::new(self); + unsafe { slice::from_raw_parts_mut(me.as_mut_ptr(), me.len) } + } + + /// Returns the remaining spare capacity of the vector as a slice of + /// `MaybeUninit`. + /// + /// The returned slice can be used to fill the vector with data (e.g. by + /// reading from a file) before marking the data as initialized using the + /// [`set_len`] method. + /// + /// [`set_len`]: Vec::set_len + /// + /// # Examples + /// + /// ``` + /// // Allocate vector big enough for 10 elements. + /// let mut v = Vec::with_capacity(10); + /// + /// // Fill in the first 3 elements. + /// let uninit = v.spare_capacity_mut(); + /// uninit[0].write(0); + /// uninit[1].write(1); + /// uninit[2].write(2); + /// + /// // Mark the first 3 elements of the vector as being initialized. + /// unsafe { + /// v.set_len(3); + /// } + /// + /// assert_eq!(&v, &[0, 1, 2]); + /// ``` + #[stable(feature = "vec_spare_capacity", since = "1.60.0")] + #[inline] + pub fn spare_capacity_mut(&mut self) -> &mut [MaybeUninit] { + // Note: + // This method is not implemented in terms of `split_at_spare_mut`, + // to prevent invalidation of pointers to the buffer. + unsafe { + slice::from_raw_parts_mut( + self.as_mut_ptr().add(self.len) as *mut MaybeUninit, + self.buf.capacity() - self.len, + ) + } + } + + /// Returns vector content as a slice of `T`, along with the remaining spare + /// capacity of the vector as a slice of `MaybeUninit`. + /// + /// The returned spare capacity slice can be used to fill the vector with data + /// (e.g. by reading from a file) before marking the data as initialized using + /// the [`set_len`] method. + /// + /// [`set_len`]: Vec::set_len + /// + /// Note that this is a low-level API, which should be used with care for + /// optimization purposes. If you need to append data to a `Vec` + /// you can use [`push`], [`extend`], [`extend_from_slice`], + /// [`extend_from_within`], [`insert`], [`append`], [`resize`] or + /// [`resize_with`], depending on your exact needs. + /// + /// [`push`]: Vec::push + /// [`extend`]: Vec::extend + /// [`extend_from_slice`]: Vec::extend_from_slice + /// [`extend_from_within`]: Vec::extend_from_within + /// [`insert`]: Vec::insert + /// [`append`]: Vec::append + /// [`resize`]: Vec::resize + /// [`resize_with`]: Vec::resize_with + /// + /// # Examples + /// + /// ``` + /// #![feature(vec_split_at_spare)] + /// + /// let mut v = vec![1, 1, 2]; + /// + /// // Reserve additional space big enough for 10 elements. + /// v.reserve(10); + /// + /// let (init, uninit) = v.split_at_spare_mut(); + /// let sum = init.iter().copied().sum::(); + /// + /// // Fill in the next 4 elements. + /// uninit[0].write(sum); + /// uninit[1].write(sum * 2); + /// uninit[2].write(sum * 3); + /// uninit[3].write(sum * 4); + /// + /// // Mark the 4 elements of the vector as being initialized. + /// unsafe { + /// let len = v.len(); + /// v.set_len(len + 4); + /// } + /// + /// assert_eq!(&v, &[1, 1, 2, 4, 8, 12, 16]); + /// ``` + #[unstable(feature = "vec_split_at_spare", issue = "81944")] + #[inline] + pub fn split_at_spare_mut(&mut self) -> (&mut [T], &mut [MaybeUninit]) { + // SAFETY: + // - len is ignored and so never changed + let (init, spare, _) = unsafe { self.split_at_spare_mut_with_len() }; + (init, spare) + } + + /// Safety: changing returned .2 (&mut usize) is considered the same as calling `.set_len(_)`. + /// + /// This method provides unique access to all vec parts at once in `extend_from_within`. + unsafe fn split_at_spare_mut_with_len( + &mut self, + ) -> (&mut [T], &mut [MaybeUninit], &mut usize) { + let ptr = self.as_mut_ptr(); + // SAFETY: + // - `ptr` is guaranteed to be valid for `self.len` elements + // - but the allocation extends out to `self.buf.capacity()` elements, possibly + // uninitialized + let spare_ptr = unsafe { ptr.add(self.len) }; + let spare_ptr = spare_ptr.cast::>(); + let spare_len = self.buf.capacity() - self.len; + + // SAFETY: + // - `ptr` is guaranteed to be valid for `self.len` elements + // - `spare_ptr` is pointing one element past the buffer, so it doesn't overlap with `initialized` + unsafe { + let initialized = slice::from_raw_parts_mut(ptr, self.len); + let spare = slice::from_raw_parts_mut(spare_ptr, spare_len); + + (initialized, spare, &mut self.len) + } + } +} + +impl Vec { + /// Resizes the `Vec` in-place so that `len` is equal to `new_len`. + /// + /// If `new_len` is greater than `len`, the `Vec` is extended by the + /// difference, with each additional slot filled with `value`. + /// If `new_len` is less than `len`, the `Vec` is simply truncated. + /// + /// This method requires `T` to implement [`Clone`], + /// in order to be able to clone the passed value. + /// If you need more flexibility (or want to rely on [`Default`] instead of + /// [`Clone`]), use [`Vec::resize_with`]. + /// If you only need to resize to a smaller size, use [`Vec::truncate`]. + /// + /// # Examples + /// + /// ``` + /// let mut vec = vec!["hello"]; + /// vec.resize(3, "world"); + /// assert_eq!(vec, ["hello", "world", "world"]); + /// + /// let mut vec = vec![1, 2, 3, 4]; + /// vec.resize(2, 0); + /// assert_eq!(vec, [1, 2]); + /// ``` + #[cfg(not(no_global_oom_handling))] + #[stable(feature = "vec_resize", since = "1.5.0")] + pub fn resize(&mut self, new_len: usize, value: T) { + let len = self.len(); + + if new_len > len { + self.extend_with(new_len - len, ExtendElement(value)) + } else { + self.truncate(new_len); + } + } + + /// Clones and appends all elements in a slice to the `Vec`. + /// + /// Iterates over the slice `other`, clones each element, and then appends + /// it to this `Vec`. The `other` slice is traversed in-order. + /// + /// Note that this function is same as [`extend`] except that it is + /// specialized to work with slices instead. If and when Rust gets + /// specialization this function will likely be deprecated (but still + /// available). + /// + /// # Examples + /// + /// ``` + /// let mut vec = vec![1]; + /// vec.extend_from_slice(&[2, 3, 4]); + /// assert_eq!(vec, [1, 2, 3, 4]); + /// ``` + /// + /// [`extend`]: Vec::extend + #[cfg(not(no_global_oom_handling))] + #[stable(feature = "vec_extend_from_slice", since = "1.6.0")] + pub fn extend_from_slice(&mut self, other: &[T]) { + self.spec_extend(other.iter()) + } + + /// Copies elements from `src` range to the end of the vector. + /// + /// # Panics + /// + /// Panics if the starting point is greater than the end point or if + /// the end point is greater than the length of the vector. + /// + /// # Examples + /// + /// ``` + /// let mut vec = vec![0, 1, 2, 3, 4]; + /// + /// vec.extend_from_within(2..); + /// assert_eq!(vec, [0, 1, 2, 3, 4, 2, 3, 4]); + /// + /// vec.extend_from_within(..2); + /// assert_eq!(vec, [0, 1, 2, 3, 4, 2, 3, 4, 0, 1]); + /// + /// vec.extend_from_within(4..8); + /// assert_eq!(vec, [0, 1, 2, 3, 4, 2, 3, 4, 0, 1, 4, 2, 3, 4]); + /// ``` + #[cfg(not(no_global_oom_handling))] + #[stable(feature = "vec_extend_from_within", since = "1.53.0")] + pub fn extend_from_within(&mut self, src: R) + where + R: RangeBounds, + { + let range = slice::range(src, ..self.len()); + self.reserve(range.len()); + + // SAFETY: + // - `slice::range` guarantees that the given range is valid for indexing self + unsafe { + self.spec_extend_from_within(range); + } + } +} + +impl Vec<[T; N], A> { + /// Takes a `Vec<[T; N]>` and flattens it into a `Vec`. + /// + /// # Panics + /// + /// Panics if the length of the resulting vector would overflow a `usize`. + /// + /// This is only possible when flattening a vector of arrays of zero-sized + /// types, and thus tends to be irrelevant in practice. If + /// `size_of::() > 0`, this will never panic. + /// + /// # Examples + /// + /// ``` + /// #![feature(slice_flatten)] + /// + /// let mut vec = vec![[1, 2, 3], [4, 5, 6], [7, 8, 9]]; + /// assert_eq!(vec.pop(), Some([7, 8, 9])); + /// + /// let mut flattened = vec.into_flattened(); + /// assert_eq!(flattened.pop(), Some(6)); + /// ``` + #[unstable(feature = "slice_flatten", issue = "95629")] + pub fn into_flattened(self) -> Vec { + let (ptr, len, cap, alloc) = self.into_raw_parts_with_alloc(); + let (new_len, new_cap) = if mem::size_of::() == 0 { + (len.checked_mul(N).expect("vec len overflow"), usize::MAX) + } else { + // SAFETY: + // - `cap * N` cannot overflow because the allocation is already in + // the address space. + // - Each `[T; N]` has `N` valid elements, so there are `len * N` + // valid elements in the allocation. + unsafe { (len.unchecked_mul(N), cap.unchecked_mul(N)) } + }; + // SAFETY: + // - `ptr` was allocated by `self` + // - `ptr` is well-aligned because `[T; N]` has the same alignment as `T`. + // - `new_cap` refers to the same sized allocation as `cap` because + // `new_cap * size_of::()` == `cap * size_of::<[T; N]>()` + // - `len` <= `cap`, so `len * N` <= `cap * N`. + unsafe { Vec::::from_raw_parts_in(ptr.cast(), new_len, new_cap, alloc) } + } +} + +// This code generalizes `extend_with_{element,default}`. +trait ExtendWith { + fn next(&mut self) -> T; + fn last(self) -> T; +} + +struct ExtendElement(T); +impl ExtendWith for ExtendElement { + fn next(&mut self) -> T { + self.0.clone() + } + fn last(self) -> T { + self.0 + } +} + +struct ExtendFunc(F); +impl T> ExtendWith for ExtendFunc { + fn next(&mut self) -> T { + (self.0)() + } + fn last(mut self) -> T { + (self.0)() + } +} + +impl Vec { + #[cfg(not(no_global_oom_handling))] + /// Extend the vector by `n` values, using the given generator. + fn extend_with>(&mut self, n: usize, mut value: E) { + self.reserve(n); + + unsafe { + let mut ptr = self.as_mut_ptr().add(self.len()); + // Use SetLenOnDrop to work around bug where compiler + // might not realize the store through `ptr` through self.set_len() + // don't alias. + let mut local_len = SetLenOnDrop::new(&mut self.len); + + // Write all elements except the last one + for _ in 1..n { + ptr::write(ptr, value.next()); + ptr = ptr.offset(1); + // Increment the length in every step in case next() panics + local_len.increment_len(1); + } + + if n > 0 { + // We can write the last element directly without cloning needlessly + ptr::write(ptr, value.last()); + local_len.increment_len(1); + } + + // len set by scope guard + } + } +} + +impl Vec { + /// Removes consecutive repeated elements in the vector according to the + /// [`PartialEq`] trait implementation. + /// + /// If the vector is sorted, this removes all duplicates. + /// + /// # Examples + /// + /// ``` + /// let mut vec = vec![1, 2, 2, 3, 2]; + /// + /// vec.dedup(); + /// + /// assert_eq!(vec, [1, 2, 3, 2]); + /// ``` + #[stable(feature = "rust1", since = "1.0.0")] + #[inline] + pub fn dedup(&mut self) { + self.dedup_by(|a, b| a == b) + } +} + +//////////////////////////////////////////////////////////////////////////////// +// Internal methods and functions +//////////////////////////////////////////////////////////////////////////////// + +#[doc(hidden)] +#[cfg(not(no_global_oom_handling))] +#[stable(feature = "rust1", since = "1.0.0")] +pub fn from_elem(elem: T, n: usize) -> Vec { + ::from_elem(elem, n, Global) +} + +#[doc(hidden)] +#[cfg(not(no_global_oom_handling))] +#[unstable(feature = "allocator_api", issue = "32838")] +pub fn from_elem_in(elem: T, n: usize, alloc: A) -> Vec { + ::from_elem(elem, n, alloc) +} + +trait ExtendFromWithinSpec { + /// # Safety + /// + /// - `src` needs to be valid index + /// - `self.capacity() - self.len()` must be `>= src.len()` + unsafe fn spec_extend_from_within(&mut self, src: Range); +} + +impl ExtendFromWithinSpec for Vec { + default unsafe fn spec_extend_from_within(&mut self, src: Range) { + // SAFETY: + // - len is increased only after initializing elements + let (this, spare, len) = unsafe { self.split_at_spare_mut_with_len() }; + + // SAFETY: + // - caller guaratees that src is a valid index + let to_clone = unsafe { this.get_unchecked(src) }; + + iter::zip(to_clone, spare) + .map(|(src, dst)| dst.write(src.clone())) + // Note: + // - Element was just initialized with `MaybeUninit::write`, so it's ok to increase len + // - len is increased after each element to prevent leaks (see issue #82533) + .for_each(|_| *len += 1); + } +} + +impl ExtendFromWithinSpec for Vec { + unsafe fn spec_extend_from_within(&mut self, src: Range) { + let count = src.len(); + { + let (init, spare) = self.split_at_spare_mut(); + + // SAFETY: + // - caller guaratees that `src` is a valid index + let source = unsafe { init.get_unchecked(src) }; + + // SAFETY: + // - Both pointers are created from unique slice references (`&mut [_]`) + // so they are valid and do not overlap. + // - Elements are :Copy so it's OK to to copy them, without doing + // anything with the original values + // - `count` is equal to the len of `source`, so source is valid for + // `count` reads + // - `.reserve(count)` guarantees that `spare.len() >= count` so spare + // is valid for `count` writes + unsafe { ptr::copy_nonoverlapping(source.as_ptr(), spare.as_mut_ptr() as _, count) }; + } + + // SAFETY: + // - The elements were just initialized by `copy_nonoverlapping` + self.len += count; + } +} + +//////////////////////////////////////////////////////////////////////////////// +// Common trait implementations for Vec +//////////////////////////////////////////////////////////////////////////////// + +#[stable(feature = "rust1", since = "1.0.0")] +impl ops::Deref for Vec { + type Target = [T]; + + fn deref(&self) -> &[T] { + unsafe { slice::from_raw_parts(self.as_ptr(), self.len) } + } +} + +#[stable(feature = "rust1", since = "1.0.0")] +impl ops::DerefMut for Vec { + fn deref_mut(&mut self) -> &mut [T] { + unsafe { slice::from_raw_parts_mut(self.as_mut_ptr(), self.len) } + } +} + +#[cfg(not(no_global_oom_handling))] +trait SpecCloneFrom { + fn clone_from(this: &mut Self, other: &Self); +} + +#[cfg(not(no_global_oom_handling))] +impl SpecCloneFrom for Vec { + default fn clone_from(this: &mut Self, other: &Self) { + // drop anything that will not be overwritten + this.truncate(other.len()); + + // self.len <= other.len due to the truncate above, so the + // slices here are always in-bounds. + let (init, tail) = other.split_at(this.len()); + + // reuse the contained values' allocations/resources. + this.clone_from_slice(init); + this.extend_from_slice(tail); + } +} + +#[cfg(not(no_global_oom_handling))] +impl SpecCloneFrom for Vec { + fn clone_from(this: &mut Self, other: &Self) { + this.clear(); + this.extend_from_slice(other); + } +} + +#[cfg(not(no_global_oom_handling))] +#[stable(feature = "rust1", since = "1.0.0")] +impl Clone for Vec { + #[cfg(not(test))] + fn clone(&self) -> Self { + let alloc = self.allocator().clone(); + <[T]>::to_vec_in(&**self, alloc) + } + + // HACK(japaric): with cfg(test) the inherent `[T]::to_vec` method, which is + // required for this method definition, is not available. Instead use the + // `slice::to_vec` function which is only available with cfg(test) + // NB see the slice::hack module in slice.rs for more information + #[cfg(test)] + fn clone(&self) -> Self { + let alloc = self.allocator().clone(); + crate::slice::to_vec(&**self, alloc) + } + + fn clone_from(&mut self, other: &Self) { + SpecCloneFrom::clone_from(self, other) + } +} + +/// The hash of a vector is the same as that of the corresponding slice, +/// as required by the `core::borrow::Borrow` implementation. +/// +/// ``` +/// #![feature(build_hasher_simple_hash_one)] +/// use std::hash::BuildHasher; +/// +/// let b = std::collections::hash_map::RandomState::new(); +/// let v: Vec = vec![0xa8, 0x3c, 0x09]; +/// let s: &[u8] = &[0xa8, 0x3c, 0x09]; +/// assert_eq!(b.hash_one(v), b.hash_one(s)); +/// ``` +#[stable(feature = "rust1", since = "1.0.0")] +impl Hash for Vec { + #[inline] + fn hash(&self, state: &mut H) { + Hash::hash(&**self, state) + } +} + +#[stable(feature = "rust1", since = "1.0.0")] +#[rustc_on_unimplemented( + message = "vector indices are of type `usize` or ranges of `usize`", + label = "vector indices are of type `usize` or ranges of `usize`" +)] +impl, A: Allocator> Index for Vec { + type Output = I::Output; + + #[inline] + fn index(&self, index: I) -> &Self::Output { + Index::index(&**self, index) + } +} + +#[stable(feature = "rust1", since = "1.0.0")] +#[rustc_on_unimplemented( + message = "vector indices are of type `usize` or ranges of `usize`", + label = "vector indices are of type `usize` or ranges of `usize`" +)] +impl, A: Allocator> IndexMut for Vec { + #[inline] + fn index_mut(&mut self, index: I) -> &mut Self::Output { + IndexMut::index_mut(&mut **self, index) + } +} + +#[cfg(not(no_global_oom_handling))] +#[stable(feature = "rust1", since = "1.0.0")] +impl FromIterator for Vec { + #[inline] + fn from_iter>(iter: I) -> Vec { + >::from_iter(iter.into_iter()) + } +} + +#[stable(feature = "rust1", since = "1.0.0")] +impl IntoIterator for Vec { + type Item = T; + type IntoIter = IntoIter; + + /// Creates a consuming iterator, that is, one that moves each value out of + /// the vector (from start to end). The vector cannot be used after calling + /// this. + /// + /// # Examples + /// + /// ``` + /// let v = vec!["a".to_string(), "b".to_string()]; + /// for s in v.into_iter() { + /// // s has type String, not &String + /// println!("{s}"); + /// } + /// ``` + #[inline] + fn into_iter(self) -> IntoIter { + unsafe { + let mut me = ManuallyDrop::new(self); + let alloc = ManuallyDrop::new(ptr::read(me.allocator())); + let begin = me.as_mut_ptr(); + let end = if mem::size_of::() == 0 { + arith_offset(begin as *const i8, me.len() as isize) as *const T + } else { + begin.add(me.len()) as *const T + }; + let cap = me.buf.capacity(); + IntoIter { + buf: NonNull::new_unchecked(begin), + phantom: PhantomData, + cap, + alloc, + ptr: begin, + end, + } + } + } +} + +#[stable(feature = "rust1", since = "1.0.0")] +impl<'a, T, A: Allocator> IntoIterator for &'a Vec { + type Item = &'a T; + type IntoIter = slice::Iter<'a, T>; + + fn into_iter(self) -> slice::Iter<'a, T> { + self.iter() + } +} + +#[stable(feature = "rust1", since = "1.0.0")] +impl<'a, T, A: Allocator> IntoIterator for &'a mut Vec { + type Item = &'a mut T; + type IntoIter = slice::IterMut<'a, T>; + + fn into_iter(self) -> slice::IterMut<'a, T> { + self.iter_mut() + } +} + +#[cfg(not(no_global_oom_handling))] +#[stable(feature = "rust1", since = "1.0.0")] +impl Extend for Vec { + #[inline] + fn extend>(&mut self, iter: I) { + >::spec_extend(self, iter.into_iter()) + } + + #[inline] + fn extend_one(&mut self, item: T) { + self.push(item); + } + + #[inline] + fn extend_reserve(&mut self, additional: usize) { + self.reserve(additional); + } +} + +impl Vec { + // leaf method to which various SpecFrom/SpecExtend implementations delegate when + // they have no further optimizations to apply + #[cfg(not(no_global_oom_handling))] + fn extend_desugared>(&mut self, mut iterator: I) { + // This is the case for a general iterator. + // + // This function should be the moral equivalent of: + // + // for item in iterator { + // self.push(item); + // } + while let Some(element) = iterator.next() { + let len = self.len(); + if len == self.capacity() { + let (lower, _) = iterator.size_hint(); + self.reserve(lower.saturating_add(1)); + } + unsafe { + ptr::write(self.as_mut_ptr().add(len), element); + // Since next() executes user code which can panic we have to bump the length + // after each step. + // NB can't overflow since we would have had to alloc the address space + self.set_len(len + 1); + } + } + } + + /// Creates a splicing iterator that replaces the specified range in the vector + /// with the given `replace_with` iterator and yields the removed items. + /// `replace_with` does not need to be the same length as `range`. + /// + /// `range` is removed even if the iterator is not consumed until the end. + /// + /// It is unspecified how many elements are removed from the vector + /// if the `Splice` value is leaked. + /// + /// The input iterator `replace_with` is only consumed when the `Splice` value is dropped. + /// + /// This is optimal if: + /// + /// * The tail (elements in the vector after `range`) is empty, + /// * or `replace_with` yields fewer or equal elements than `range`’s length + /// * or the lower bound of its `size_hint()` is exact. + /// + /// Otherwise, a temporary vector is allocated and the tail is moved twice. + /// + /// # Panics + /// + /// Panics if the starting point is greater than the end point or if + /// the end point is greater than the length of the vector. + /// + /// # Examples + /// + /// ``` + /// let mut v = vec![1, 2, 3, 4]; + /// let new = [7, 8, 9]; + /// let u: Vec<_> = v.splice(1..3, new).collect(); + /// assert_eq!(v, &[1, 7, 8, 9, 4]); + /// assert_eq!(u, &[2, 3]); + /// ``` + #[cfg(not(no_global_oom_handling))] + #[inline] + #[stable(feature = "vec_splice", since = "1.21.0")] + pub fn splice(&mut self, range: R, replace_with: I) -> Splice<'_, I::IntoIter, A> + where + R: RangeBounds, + I: IntoIterator, + { + Splice { drain: self.drain(range), replace_with: replace_with.into_iter() } + } + + /// Creates an iterator which uses a closure to determine if an element should be removed. + /// + /// If the closure returns true, then the element is removed and yielded. + /// If the closure returns false, the element will remain in the vector and will not be yielded + /// by the iterator. + /// + /// Using this method is equivalent to the following code: + /// + /// ``` + /// # let some_predicate = |x: &mut i32| { *x == 2 || *x == 3 || *x == 6 }; + /// # let mut vec = vec![1, 2, 3, 4, 5, 6]; + /// let mut i = 0; + /// while i < vec.len() { + /// if some_predicate(&mut vec[i]) { + /// let val = vec.remove(i); + /// // your code here + /// } else { + /// i += 1; + /// } + /// } + /// + /// # assert_eq!(vec, vec![1, 4, 5]); + /// ``` + /// + /// But `drain_filter` is easier to use. `drain_filter` is also more efficient, + /// because it can backshift the elements of the array in bulk. + /// + /// Note that `drain_filter` also lets you mutate every element in the filter closure, + /// regardless of whether you choose to keep or remove it. + /// + /// # Examples + /// + /// Splitting an array into evens and odds, reusing the original allocation: + /// + /// ``` + /// #![feature(drain_filter)] + /// let mut numbers = vec![1, 2, 3, 4, 5, 6, 8, 9, 11, 13, 14, 15]; + /// + /// let evens = numbers.drain_filter(|x| *x % 2 == 0).collect::>(); + /// let odds = numbers; + /// + /// assert_eq!(evens, vec![2, 4, 6, 8, 14]); + /// assert_eq!(odds, vec![1, 3, 5, 9, 11, 13, 15]); + /// ``` + #[unstable(feature = "drain_filter", reason = "recently added", issue = "43244")] + pub fn drain_filter(&mut self, filter: F) -> DrainFilter<'_, T, F, A> + where + F: FnMut(&mut T) -> bool, + { + let old_len = self.len(); + + // Guard against us getting leaked (leak amplification) + unsafe { + self.set_len(0); + } + + DrainFilter { vec: self, idx: 0, del: 0, old_len, pred: filter, panic_flag: false } + } +} + +/// Extend implementation that copies elements out of references before pushing them onto the Vec. +/// +/// This implementation is specialized for slice iterators, where it uses [`copy_from_slice`] to +/// append the entire slice at once. +/// +/// [`copy_from_slice`]: slice::copy_from_slice +#[cfg(not(no_global_oom_handling))] +#[stable(feature = "extend_ref", since = "1.2.0")] +impl<'a, T: Copy + 'a, A: Allocator + 'a> Extend<&'a T> for Vec { + fn extend>(&mut self, iter: I) { + self.spec_extend(iter.into_iter()) + } + + #[inline] + fn extend_one(&mut self, &item: &'a T) { + self.push(item); + } + + #[inline] + fn extend_reserve(&mut self, additional: usize) { + self.reserve(additional); + } +} + +/// Implements comparison of vectors, [lexicographically](core::cmp::Ord#lexicographical-comparison). +#[stable(feature = "rust1", since = "1.0.0")] +impl PartialOrd for Vec { + #[inline] + fn partial_cmp(&self, other: &Self) -> Option { + PartialOrd::partial_cmp(&**self, &**other) + } +} + +#[stable(feature = "rust1", since = "1.0.0")] +impl Eq for Vec {} + +/// Implements ordering of vectors, [lexicographically](core::cmp::Ord#lexicographical-comparison). +#[stable(feature = "rust1", since = "1.0.0")] +impl Ord for Vec { + #[inline] + fn cmp(&self, other: &Self) -> Ordering { + Ord::cmp(&**self, &**other) + } +} + +#[stable(feature = "rust1", since = "1.0.0")] +unsafe impl<#[may_dangle] T, A: Allocator> Drop for Vec { + fn drop(&mut self) { + unsafe { + // use drop for [T] + // use a raw slice to refer to the elements of the vector as weakest necessary type; + // could avoid questions of validity in certain cases + ptr::drop_in_place(ptr::slice_from_raw_parts_mut(self.as_mut_ptr(), self.len)) + } + // RawVec handles deallocation + } +} + +#[stable(feature = "rust1", since = "1.0.0")] +#[rustc_const_unstable(feature = "const_default_impls", issue = "87864")] +impl const Default for Vec { + /// Creates an empty `Vec`. + fn default() -> Vec { + Vec::new() + } +} + +#[stable(feature = "rust1", since = "1.0.0")] +impl fmt::Debug for Vec { + fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result { + fmt::Debug::fmt(&**self, f) + } +} + +#[stable(feature = "rust1", since = "1.0.0")] +impl AsRef> for Vec { + fn as_ref(&self) -> &Vec { + self + } +} + +#[stable(feature = "vec_as_mut", since = "1.5.0")] +impl AsMut> for Vec { + fn as_mut(&mut self) -> &mut Vec { + self + } +} + +#[stable(feature = "rust1", since = "1.0.0")] +impl AsRef<[T]> for Vec { + fn as_ref(&self) -> &[T] { + self + } +} + +#[stable(feature = "vec_as_mut", since = "1.5.0")] +impl AsMut<[T]> for Vec { + fn as_mut(&mut self) -> &mut [T] { + self + } +} + +#[cfg(not(no_global_oom_handling))] +#[stable(feature = "rust1", since = "1.0.0")] +impl From<&[T]> for Vec { + /// Allocate a `Vec` and fill it by cloning `s`'s items. + /// + /// # Examples + /// + /// ``` + /// assert_eq!(Vec::from(&[1, 2, 3][..]), vec![1, 2, 3]); + /// ``` + #[cfg(not(test))] + fn from(s: &[T]) -> Vec { + s.to_vec() + } + #[cfg(test)] + fn from(s: &[T]) -> Vec { + crate::slice::to_vec(s, Global) + } +} + +#[cfg(not(no_global_oom_handling))] +#[stable(feature = "vec_from_mut", since = "1.19.0")] +impl From<&mut [T]> for Vec { + /// Allocate a `Vec` and fill it by cloning `s`'s items. + /// + /// # Examples + /// + /// ``` + /// assert_eq!(Vec::from(&mut [1, 2, 3][..]), vec![1, 2, 3]); + /// ``` + #[cfg(not(test))] + fn from(s: &mut [T]) -> Vec { + s.to_vec() + } + #[cfg(test)] + fn from(s: &mut [T]) -> Vec { + crate::slice::to_vec(s, Global) + } +} + +#[cfg(not(no_global_oom_handling))] +#[stable(feature = "vec_from_array", since = "1.44.0")] +impl From<[T; N]> for Vec { + /// Allocate a `Vec` and move `s`'s items into it. + /// + /// # Examples + /// + /// ``` + /// assert_eq!(Vec::from([1, 2, 3]), vec![1, 2, 3]); + /// ``` + #[cfg(not(test))] + fn from(s: [T; N]) -> Vec { + <[T]>::into_vec(box s) + } + + #[cfg(test)] + fn from(s: [T; N]) -> Vec { + crate::slice::into_vec(box s) + } +} + +#[stable(feature = "vec_from_cow_slice", since = "1.14.0")] +impl<'a, T> From> for Vec +where + [T]: ToOwned>, +{ + /// Convert a clone-on-write slice into a vector. + /// + /// If `s` already owns a `Vec`, it will be returned directly. + /// If `s` is borrowing a slice, a new `Vec` will be allocated and + /// filled by cloning `s`'s items into it. + /// + /// # Examples + /// + /// ``` + /// # use std::borrow::Cow; + /// let o: Cow<[i32]> = Cow::Owned(vec![1, 2, 3]); + /// let b: Cow<[i32]> = Cow::Borrowed(&[1, 2, 3]); + /// assert_eq!(Vec::from(o), Vec::from(b)); + /// ``` + fn from(s: Cow<'a, [T]>) -> Vec { + s.into_owned() + } +} + +// note: test pulls in libstd, which causes errors here +#[cfg(not(test))] +#[stable(feature = "vec_from_box", since = "1.18.0")] +impl From> for Vec { + /// Convert a boxed slice into a vector by transferring ownership of + /// the existing heap allocation. + /// + /// # Examples + /// + /// ``` + /// let b: Box<[i32]> = vec![1, 2, 3].into_boxed_slice(); + /// assert_eq!(Vec::from(b), vec![1, 2, 3]); + /// ``` + fn from(s: Box<[T], A>) -> Self { + s.into_vec() + } +} + +// note: test pulls in libstd, which causes errors here +#[cfg(not(no_global_oom_handling))] +#[cfg(not(test))] +#[stable(feature = "box_from_vec", since = "1.20.0")] +impl From> for Box<[T], A> { + /// Convert a vector into a boxed slice. + /// + /// If `v` has excess capacity, its items will be moved into a + /// newly-allocated buffer with exactly the right capacity. + /// + /// # Examples + /// + /// ``` + /// assert_eq!(Box::from(vec![1, 2, 3]), vec![1, 2, 3].into_boxed_slice()); + /// ``` + fn from(v: Vec) -> Self { + v.into_boxed_slice() + } +} + +#[cfg(not(no_global_oom_handling))] +#[stable(feature = "rust1", since = "1.0.0")] +impl From<&str> for Vec { + /// Allocate a `Vec` and fill it with a UTF-8 string. + /// + /// # Examples + /// + /// ``` + /// assert_eq!(Vec::from("123"), vec![b'1', b'2', b'3']); + /// ``` + fn from(s: &str) -> Vec { + From::from(s.as_bytes()) + } +} + +#[stable(feature = "array_try_from_vec", since = "1.48.0")] +impl TryFrom> for [T; N] { + type Error = Vec; + + /// Gets the entire contents of the `Vec` as an array, + /// if its size exactly matches that of the requested array. + /// + /// # Examples + /// + /// ``` + /// assert_eq!(vec![1, 2, 3].try_into(), Ok([1, 2, 3])); + /// assert_eq!(>::new().try_into(), Ok([])); + /// ``` + /// + /// If the length doesn't match, the input comes back in `Err`: + /// ``` + /// let r: Result<[i32; 4], _> = (0..10).collect::>().try_into(); + /// assert_eq!(r, Err(vec![0, 1, 2, 3, 4, 5, 6, 7, 8, 9])); + /// ``` + /// + /// If you're fine with just getting a prefix of the `Vec`, + /// you can call [`.truncate(N)`](Vec::truncate) first. + /// ``` + /// let mut v = String::from("hello world").into_bytes(); + /// v.sort(); + /// v.truncate(2); + /// let [a, b]: [_; 2] = v.try_into().unwrap(); + /// assert_eq!(a, b' '); + /// assert_eq!(b, b'd'); + /// ``` + fn try_from(mut vec: Vec) -> Result<[T; N], Vec> { + if vec.len() != N { + return Err(vec); + } + + // SAFETY: `.set_len(0)` is always sound. + unsafe { vec.set_len(0) }; + + // SAFETY: A `Vec`'s pointer is always aligned properly, and + // the alignment the array needs is the same as the items. + // We checked earlier that we have sufficient items. + // The items will not double-drop as the `set_len` + // tells the `Vec` not to also drop them. + let array = unsafe { ptr::read(vec.as_ptr() as *const [T; N]) }; + Ok(array) + } +} diff --git a/rust/alloc/vec/partial_eq.rs b/rust/alloc/vec/partial_eq.rs new file mode 100644 index 000000000..10ad4e492 --- /dev/null +++ b/rust/alloc/vec/partial_eq.rs @@ -0,0 +1,49 @@ +// SPDX-License-Identifier: Apache-2.0 OR MIT + +use crate::alloc::Allocator; +#[cfg(not(no_global_oom_handling))] +use crate::borrow::Cow; + +use super::Vec; + +macro_rules! __impl_slice_eq1 { + ([$($vars:tt)*] $lhs:ty, $rhs:ty $(where $ty:ty: $bound:ident)?, #[$stability:meta]) => { + #[$stability] + impl PartialEq<$rhs> for $lhs + where + T: PartialEq, + $($ty: $bound)? + { + #[inline] + fn eq(&self, other: &$rhs) -> bool { self[..] == other[..] } + #[inline] + fn ne(&self, other: &$rhs) -> bool { self[..] != other[..] } + } + } +} + +__impl_slice_eq1! { [A1: Allocator, A2: Allocator] Vec, Vec, #[stable(feature = "rust1", since = "1.0.0")] } +__impl_slice_eq1! { [A: Allocator] Vec, &[U], #[stable(feature = "rust1", since = "1.0.0")] } +__impl_slice_eq1! { [A: Allocator] Vec, &mut [U], #[stable(feature = "rust1", since = "1.0.0")] } +__impl_slice_eq1! { [A: Allocator] &[T], Vec, #[stable(feature = "partialeq_vec_for_ref_slice", since = "1.46.0")] } +__impl_slice_eq1! { [A: Allocator] &mut [T], Vec, #[stable(feature = "partialeq_vec_for_ref_slice", since = "1.46.0")] } +__impl_slice_eq1! { [A: Allocator] Vec, [U], #[stable(feature = "partialeq_vec_for_slice", since = "1.48.0")] } +__impl_slice_eq1! { [A: Allocator] [T], Vec, #[stable(feature = "partialeq_vec_for_slice", since = "1.48.0")] } +#[cfg(not(no_global_oom_handling))] +__impl_slice_eq1! { [A: Allocator] Cow<'_, [T]>, Vec where T: Clone, #[stable(feature = "rust1", since = "1.0.0")] } +#[cfg(not(no_global_oom_handling))] +__impl_slice_eq1! { [] Cow<'_, [T]>, &[U] where T: Clone, #[stable(feature = "rust1", since = "1.0.0")] } +#[cfg(not(no_global_oom_handling))] +__impl_slice_eq1! { [] Cow<'_, [T]>, &mut [U] where T: Clone, #[stable(feature = "rust1", since = "1.0.0")] } +__impl_slice_eq1! { [A: Allocator, const N: usize] Vec, [U; N], #[stable(feature = "rust1", since = "1.0.0")] } +__impl_slice_eq1! { [A: Allocator, const N: usize] Vec, &[U; N], #[stable(feature = "rust1", since = "1.0.0")] } + +// NOTE: some less important impls are omitted to reduce code bloat +// FIXME(Centril): Reconsider this? +//__impl_slice_eq1! { [const N: usize] Vec, &mut [B; N], } +//__impl_slice_eq1! { [const N: usize] [A; N], Vec, } +//__impl_slice_eq1! { [const N: usize] &[A; N], Vec, } +//__impl_slice_eq1! { [const N: usize] &mut [A; N], Vec, } +//__impl_slice_eq1! { [const N: usize] Cow<'a, [A]>, [B; N], } +//__impl_slice_eq1! { [const N: usize] Cow<'a, [A]>, &[B; N], } +//__impl_slice_eq1! { [const N: usize] Cow<'a, [A]>, &mut [B; N], } -- cgit v1.2.3