From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- sound/firewire/fireworks/fireworks_command.c | 371 +++++++++++++++++++++++++++ 1 file changed, 371 insertions(+) create mode 100644 sound/firewire/fireworks/fireworks_command.c (limited to 'sound/firewire/fireworks/fireworks_command.c') diff --git a/sound/firewire/fireworks/fireworks_command.c b/sound/firewire/fireworks/fireworks_command.c new file mode 100644 index 000000000..7e255fc2c --- /dev/null +++ b/sound/firewire/fireworks/fireworks_command.c @@ -0,0 +1,371 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * fireworks_command.c - a part of driver for Fireworks based devices + * + * Copyright (c) 2013-2014 Takashi Sakamoto + */ + +#include "./fireworks.h" + +/* + * This driver uses transaction version 1 or later to use extended hardware + * information. Then too old devices are not available. + * + * Each commands are not required to have continuous sequence numbers. This + * number is just used to match command and response. + * + * This module support a part of commands. Please see FFADO if you want to see + * whole commands. But there are some commands which FFADO don't implement. + * + * Fireworks also supports AV/C general commands and AV/C Stream Format + * Information commands. But this module don't use them. + */ + +#define KERNEL_SEQNUM_MIN (SND_EFW_TRANSACTION_USER_SEQNUM_MAX + 2) +#define KERNEL_SEQNUM_MAX ((u32)~0) + +/* for clock source and sampling rate */ +struct efc_clock { + u32 source; + u32 sampling_rate; + u32 index; +}; + +/* command categories */ +enum efc_category { + EFC_CAT_HWINFO = 0, + EFC_CAT_TRANSPORT = 2, + EFC_CAT_HWCTL = 3, +}; + +/* hardware info category commands */ +enum efc_cmd_hwinfo { + EFC_CMD_HWINFO_GET_CAPS = 0, + EFC_CMD_HWINFO_GET_POLLED = 1, + EFC_CMD_HWINFO_SET_RESP_ADDR = 2 +}; + +enum efc_cmd_transport { + EFC_CMD_TRANSPORT_SET_TX_MODE = 0 +}; + +/* hardware control category commands */ +enum efc_cmd_hwctl { + EFC_CMD_HWCTL_SET_CLOCK = 0, + EFC_CMD_HWCTL_GET_CLOCK = 1, + EFC_CMD_HWCTL_IDENTIFY = 5 +}; + +/* return values in response */ +enum efr_status { + EFR_STATUS_OK = 0, + EFR_STATUS_BAD = 1, + EFR_STATUS_BAD_COMMAND = 2, + EFR_STATUS_COMM_ERR = 3, + EFR_STATUS_BAD_QUAD_COUNT = 4, + EFR_STATUS_UNSUPPORTED = 5, + EFR_STATUS_1394_TIMEOUT = 6, + EFR_STATUS_DSP_TIMEOUT = 7, + EFR_STATUS_BAD_RATE = 8, + EFR_STATUS_BAD_CLOCK = 9, + EFR_STATUS_BAD_CHANNEL = 10, + EFR_STATUS_BAD_PAN = 11, + EFR_STATUS_FLASH_BUSY = 12, + EFR_STATUS_BAD_MIRROR = 13, + EFR_STATUS_BAD_LED = 14, + EFR_STATUS_BAD_PARAMETER = 15, + EFR_STATUS_INCOMPLETE = 0x80000000 +}; + +static const char *const efr_status_names[] = { + [EFR_STATUS_OK] = "OK", + [EFR_STATUS_BAD] = "bad", + [EFR_STATUS_BAD_COMMAND] = "bad command", + [EFR_STATUS_COMM_ERR] = "comm err", + [EFR_STATUS_BAD_QUAD_COUNT] = "bad quad count", + [EFR_STATUS_UNSUPPORTED] = "unsupported", + [EFR_STATUS_1394_TIMEOUT] = "1394 timeout", + [EFR_STATUS_DSP_TIMEOUT] = "DSP timeout", + [EFR_STATUS_BAD_RATE] = "bad rate", + [EFR_STATUS_BAD_CLOCK] = "bad clock", + [EFR_STATUS_BAD_CHANNEL] = "bad channel", + [EFR_STATUS_BAD_PAN] = "bad pan", + [EFR_STATUS_FLASH_BUSY] = "flash busy", + [EFR_STATUS_BAD_MIRROR] = "bad mirror", + [EFR_STATUS_BAD_LED] = "bad LED", + [EFR_STATUS_BAD_PARAMETER] = "bad parameter", + [EFR_STATUS_BAD_PARAMETER + 1] = "incomplete" +}; + +static int +efw_transaction(struct snd_efw *efw, unsigned int category, + unsigned int command, + const __be32 *params, unsigned int param_bytes, + const __be32 *resp, unsigned int resp_bytes) +{ + struct snd_efw_transaction *header; + __be32 *buf; + u32 seqnum; + unsigned int buf_bytes, cmd_bytes; + int err; + + /* calculate buffer size*/ + buf_bytes = sizeof(struct snd_efw_transaction) + + max(param_bytes, resp_bytes); + + /* keep buffer */ + buf = kzalloc(buf_bytes, GFP_KERNEL); + if (buf == NULL) + return -ENOMEM; + + /* to keep consistency of sequence number */ + spin_lock(&efw->lock); + if ((efw->seqnum < KERNEL_SEQNUM_MIN) || + (efw->seqnum >= KERNEL_SEQNUM_MAX - 2)) + efw->seqnum = KERNEL_SEQNUM_MIN; + else + efw->seqnum += 2; + seqnum = efw->seqnum; + spin_unlock(&efw->lock); + + /* fill transaction header fields */ + cmd_bytes = sizeof(struct snd_efw_transaction) + param_bytes; + header = (struct snd_efw_transaction *)buf; + header->length = cpu_to_be32(cmd_bytes / sizeof(__be32)); + header->version = cpu_to_be32(1); + header->seqnum = cpu_to_be32(seqnum); + header->category = cpu_to_be32(category); + header->command = cpu_to_be32(command); + header->status = 0; + + /* fill transaction command parameters */ + memcpy(header->params, params, param_bytes); + + err = snd_efw_transaction_run(efw->unit, buf, cmd_bytes, + buf, buf_bytes); + if (err < 0) + goto end; + + /* check transaction header fields */ + if ((be32_to_cpu(header->version) < 1) || + (be32_to_cpu(header->category) != category) || + (be32_to_cpu(header->command) != command) || + (be32_to_cpu(header->status) != EFR_STATUS_OK)) { + dev_err(&efw->unit->device, "EFW command failed [%u/%u]: %s\n", + be32_to_cpu(header->category), + be32_to_cpu(header->command), + efr_status_names[be32_to_cpu(header->status)]); + err = -EIO; + goto end; + } + + if (resp == NULL) + goto end; + + /* fill transaction response parameters */ + memset((void *)resp, 0, resp_bytes); + resp_bytes = min_t(unsigned int, resp_bytes, + be32_to_cpu(header->length) * sizeof(__be32) - + sizeof(struct snd_efw_transaction)); + memcpy((void *)resp, &buf[6], resp_bytes); +end: + kfree(buf); + return err; +} + +/* + * The address in host system for transaction response is changable when the + * device supports. struct hwinfo.flags includes its flag. The default is + * MEMORY_SPACE_EFW_RESPONSE. + */ +int snd_efw_command_set_resp_addr(struct snd_efw *efw, + u16 addr_high, u32 addr_low) +{ + __be32 addr[2]; + + addr[0] = cpu_to_be32(addr_high); + addr[1] = cpu_to_be32(addr_low); + + if (!efw->resp_addr_changable) + return -ENOSYS; + + return efw_transaction(efw, EFC_CAT_HWCTL, + EFC_CMD_HWINFO_SET_RESP_ADDR, + addr, sizeof(addr), NULL, 0); +} + +/* + * This is for timestamp processing. In Windows mode, all 32bit fields of second + * CIP header in AMDTP transmit packet is used for 'presentation timestamp'. In + * 'no data' packet the value of this field is 0x90ffffff. + */ +int snd_efw_command_set_tx_mode(struct snd_efw *efw, + enum snd_efw_transport_mode mode) +{ + __be32 param = cpu_to_be32(mode); + return efw_transaction(efw, EFC_CAT_TRANSPORT, + EFC_CMD_TRANSPORT_SET_TX_MODE, + ¶m, sizeof(param), NULL, 0); +} + +int snd_efw_command_get_hwinfo(struct snd_efw *efw, + struct snd_efw_hwinfo *hwinfo) +{ + int err; + + err = efw_transaction(efw, EFC_CAT_HWINFO, + EFC_CMD_HWINFO_GET_CAPS, + NULL, 0, (__be32 *)hwinfo, sizeof(*hwinfo)); + if (err < 0) + goto end; + + be32_to_cpus(&hwinfo->flags); + be32_to_cpus(&hwinfo->guid_hi); + be32_to_cpus(&hwinfo->guid_lo); + be32_to_cpus(&hwinfo->type); + be32_to_cpus(&hwinfo->version); + be32_to_cpus(&hwinfo->supported_clocks); + be32_to_cpus(&hwinfo->amdtp_rx_pcm_channels); + be32_to_cpus(&hwinfo->amdtp_tx_pcm_channels); + be32_to_cpus(&hwinfo->phys_out); + be32_to_cpus(&hwinfo->phys_in); + be32_to_cpus(&hwinfo->phys_out_grp_count); + be32_to_cpus(&hwinfo->phys_in_grp_count); + be32_to_cpus(&hwinfo->midi_out_ports); + be32_to_cpus(&hwinfo->midi_in_ports); + be32_to_cpus(&hwinfo->max_sample_rate); + be32_to_cpus(&hwinfo->min_sample_rate); + be32_to_cpus(&hwinfo->dsp_version); + be32_to_cpus(&hwinfo->arm_version); + be32_to_cpus(&hwinfo->mixer_playback_channels); + be32_to_cpus(&hwinfo->mixer_capture_channels); + be32_to_cpus(&hwinfo->fpga_version); + be32_to_cpus(&hwinfo->amdtp_rx_pcm_channels_2x); + be32_to_cpus(&hwinfo->amdtp_tx_pcm_channels_2x); + be32_to_cpus(&hwinfo->amdtp_rx_pcm_channels_4x); + be32_to_cpus(&hwinfo->amdtp_tx_pcm_channels_4x); + + /* ensure terminated */ + hwinfo->vendor_name[HWINFO_NAME_SIZE_BYTES - 1] = '\0'; + hwinfo->model_name[HWINFO_NAME_SIZE_BYTES - 1] = '\0'; +end: + return err; +} + +int snd_efw_command_get_phys_meters(struct snd_efw *efw, + struct snd_efw_phys_meters *meters, + unsigned int len) +{ + u32 *buf = (u32 *)meters; + unsigned int i; + int err; + + err = efw_transaction(efw, EFC_CAT_HWINFO, + EFC_CMD_HWINFO_GET_POLLED, + NULL, 0, (__be32 *)meters, len); + if (err >= 0) + for (i = 0; i < len / sizeof(u32); i++) + be32_to_cpus(&buf[i]); + + return err; +} + +static int +command_get_clock(struct snd_efw *efw, struct efc_clock *clock) +{ + int err; + + err = efw_transaction(efw, EFC_CAT_HWCTL, + EFC_CMD_HWCTL_GET_CLOCK, + NULL, 0, + (__be32 *)clock, sizeof(struct efc_clock)); + if (err >= 0) { + be32_to_cpus(&clock->source); + be32_to_cpus(&clock->sampling_rate); + be32_to_cpus(&clock->index); + } + + return err; +} + +/* give UINT_MAX if set nothing */ +static int +command_set_clock(struct snd_efw *efw, + unsigned int source, unsigned int rate) +{ + struct efc_clock clock = {0}; + int err; + + /* check arguments */ + if ((source == UINT_MAX) && (rate == UINT_MAX)) { + err = -EINVAL; + goto end; + } + + /* get current status */ + err = command_get_clock(efw, &clock); + if (err < 0) + goto end; + + /* no need */ + if ((clock.source == source) && (clock.sampling_rate == rate)) + goto end; + + /* set params */ + if ((source != UINT_MAX) && (clock.source != source)) + clock.source = source; + if ((rate != UINT_MAX) && (clock.sampling_rate != rate)) + clock.sampling_rate = rate; + clock.index = 0; + + cpu_to_be32s(&clock.source); + cpu_to_be32s(&clock.sampling_rate); + cpu_to_be32s(&clock.index); + + err = efw_transaction(efw, EFC_CAT_HWCTL, + EFC_CMD_HWCTL_SET_CLOCK, + (__be32 *)&clock, sizeof(struct efc_clock), + NULL, 0); + if (err < 0) + goto end; + + /* + * With firmware version 5.8, just after changing clock state, these + * parameters are not immediately retrieved by get command. In my + * trial, there needs to be 100msec to get changed parameters. + */ + msleep(150); +end: + return err; +} + +int snd_efw_command_get_clock_source(struct snd_efw *efw, + enum snd_efw_clock_source *source) +{ + int err; + struct efc_clock clock = {0}; + + err = command_get_clock(efw, &clock); + if (err >= 0) + *source = clock.source; + + return err; +} + +int snd_efw_command_get_sampling_rate(struct snd_efw *efw, unsigned int *rate) +{ + int err; + struct efc_clock clock = {0}; + + err = command_get_clock(efw, &clock); + if (err >= 0) + *rate = clock.sampling_rate; + + return err; +} + +int snd_efw_command_set_sampling_rate(struct snd_efw *efw, unsigned int rate) +{ + return command_set_clock(efw, UINT_MAX, rate); +} + -- cgit v1.2.3