# SPDX-License-Identifier: GPL-2.0-only
#
# wan devices configuration
#
menuconfig WAN
bool "Wan interfaces support"
help
Wide Area Networks (WANs), such as X.25, Frame Relay and leased
lines, are used to interconnect Local Area Networks (LANs) over vast
distances with data transfer rates significantly higher than those
achievable with commonly used asynchronous modem connections.
Usually, a quite expensive external device called a `WAN router' is
needed to connect to a WAN. As an alternative, a relatively
inexpensive WAN interface card can allow your Linux box to directly
connect to a WAN.
If you have one of those cards and wish to use it under Linux,
say Y here and also to the WAN driver for your card.
If unsure, say N.
if WAN
# Generic HDLC
config HDLC
tristate "Generic HDLC layer"
help
Say Y to this option if your Linux box contains a WAN (Wide Area
Network) card supported by this driver and you are planning to
connect the box to a WAN.
You will need supporting software from
.
Generic HDLC driver currently supports raw HDLC, Cisco HDLC, Frame
Relay, synchronous Point-to-Point Protocol (PPP) and X.25.
To compile this driver as a module, choose M here: the
module will be called hdlc.
If unsure, say N.
config HDLC_RAW
tristate "Raw HDLC support"
depends on HDLC
help
Generic HDLC driver supporting raw HDLC over WAN connections.
If unsure, say N.
config HDLC_RAW_ETH
tristate "Raw HDLC Ethernet device support"
depends on HDLC
help
Generic HDLC driver supporting raw HDLC Ethernet device emulation
over WAN connections.
You will need it for Ethernet over HDLC bridges.
If unsure, say N.
config HDLC_CISCO
tristate "Cisco HDLC support"
depends on HDLC
help
Generic HDLC driver supporting Cisco HDLC over WAN connections.
If unsure, say N.
config HDLC_FR
tristate "Frame Relay support"
depends on HDLC
help
Generic HDLC driver supporting Frame Relay over WAN connections.
If unsure, say N.
config HDLC_PPP
tristate "Synchronous Point-to-Point Protocol (PPP) support"
depends on HDLC
help
Generic HDLC driver supporting PPP over WAN connections.
If unsure, say N.
config HDLC_X25
tristate "X.25 protocol support"
depends on HDLC && (LAPB=m && HDLC=m || LAPB=y)
help
Generic HDLC driver supporting X.25 over WAN connections.
If unsure, say N.
comment "X.25/LAPB support is disabled"
depends on HDLC && (LAPB!=m || HDLC!=m) && LAPB!=y
config PCI200SYN
tristate "Goramo PCI200SYN support"
depends on HDLC && PCI
help
Driver for PCI200SYN cards by Goramo sp. j.
If you have such a card, say Y here and see
.
To compile this as a module, choose M here: the
module will be called pci200syn.
If unsure, say N.
config WANXL
tristate "SBE Inc. wanXL support"
depends on HDLC && PCI
help
Driver for wanXL PCI cards by SBE Inc.
If you have such a card, say Y here and see
.
To compile this as a module, choose M here: the
module will be called wanxl.
If unsure, say N.
config WANXL_BUILD_FIRMWARE
bool "rebuild wanXL firmware"
depends on WANXL && !PREVENT_FIRMWARE_BUILD
help
Allows you to rebuild firmware run by the QUICC processor.
It requires m68k toolchains and hexdump programs.
You should never need this option, say N.
config PC300TOO
tristate "Cyclades PC300 RSV/X21 alternative support"
depends on HDLC && PCI
help
Alternative driver for PC300 RSV/X21 PCI cards made by
Cyclades, Inc. If you have such a card, say Y here and see
.
To compile this as a module, choose M here: the module
will be called pc300too.
If unsure, say N here.
config N2
tristate "SDL RISCom/N2 support"
depends on HDLC && ISA
help
Driver for RISCom/N2 single or dual channel ISA cards by
SDL Communications Inc.
If you have such a card, say Y here and see
.
Note that N2csu and N2dds cards are not supported by this driver.
To compile this driver as a module, choose M here: the module
will be called n2.
If unsure, say N.
config C101
tristate "Moxa C101 support"
depends on HDLC && ISA
help
Driver for C101 SuperSync ISA cards by Moxa Technologies Co., Ltd.
If you have such a card, say Y here and see
.
To compile this driver as a module, choose M here: the
module will be called c101.
If unsure, say N.
config FARSYNC
tristate "FarSync T-Series support"
depends on HDLC && PCI
help
Support for the FarSync T-Series X.21 (and V.35/V.24) cards by
FarSite Communications Ltd.
Synchronous communication is supported on all ports at speeds up to
8Mb/s (128K on V.24) using synchronous PPP, Cisco HDLC, raw HDLC,
Frame Relay or X.25/LAPB.
If you want the module to be automatically loaded when the interface
is referenced then you should add "alias hdlcX farsync" to a file
in /etc/modprobe.d/ for each interface, where X is 0, 1, 2, ..., or
simply use "alias hdlc* farsync" to indicate all of them.
To compile this driver as a module, choose M here: the
module will be called farsync.
config FSL_UCC_HDLC
tristate "Freescale QUICC Engine HDLC support"
depends on HDLC
depends on QUICC_ENGINE
help
Driver for Freescale QUICC Engine HDLC controller. The driver
supports HDLC in NMSI and TDM mode.
To compile this driver as a module, choose M here: the
module will be called fsl_ucc_hdlc.
config SLIC_DS26522
tristate "Slic Maxim ds26522 card support"
depends on SPI
depends on FSL_SOC || ARCH_MXC || ARCH_LAYERSCAPE || COMPILE_TEST
select BITREVERSE
help
This module initializes and configures the slic maxim card
in T1 or E1 mode.
To compile this driver as a module, choose M here: the
module will be called slic_ds26522.
config IXP4XX_HSS
tristate "Intel IXP4xx HSS (synchronous serial port) support"
depends on HDLC && IXP4XX_NPE && IXP4XX_QMGR
depends on ARCH_IXP4XX && OF
select MFD_SYSCON
help
Say Y here if you want to use built-in HSS ports
on IXP4xx processor.
# X.25 network drivers
config LAPBETHER
tristate "LAPB over Ethernet driver"
depends on LAPB && X25
help
Driver for a pseudo device (typically called /dev/lapb0) which allows
you to open an LAPB point-to-point connection to some other computer
on your Ethernet network.
In order to do this, you need to say Y or M to the driver for your
Ethernet card as well as to "LAPB Data Link Driver".
To compile this driver as a module, choose M here: the
module will be called lapbether.
If unsure, say N.
endif # WAN