1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
|
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/phy/allwinner,sun8i-r40-usb-phy.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Allwinner R40 USB PHY
maintainers:
- Chen-Yu Tsai <wens@csie.org>
- Maxime Ripard <mripard@kernel.org>
properties:
"#phy-cells":
const: 1
compatible:
const: allwinner,sun8i-r40-usb-phy
reg:
items:
- description: PHY Control registers
- description: PHY PMU0 registers
- description: PHY PMU1 registers
- description: PHY PMU2 registers
reg-names:
items:
- const: phy_ctrl
- const: pmu0
- const: pmu1
- const: pmu2
clocks:
items:
- description: USB OTG PHY bus clock
- description: USB Host 0 PHY bus clock
- description: USB Host 1 PHY bus clock
clock-names:
items:
- const: usb0_phy
- const: usb1_phy
- const: usb2_phy
resets:
items:
- description: USB OTG reset
- description: USB Host 1 Controller reset
- description: USB Host 2 Controller reset
reset-names:
items:
- const: usb0_reset
- const: usb1_reset
- const: usb2_reset
usb0_id_det-gpios:
maxItems: 1
description: GPIO to the USB OTG ID pin
usb0_vbus_det-gpios:
maxItems: 1
description: GPIO to the USB OTG VBUS detect pin
usb0_vbus_power-supply:
description: Power supply to detect the USB OTG VBUS
usb0_vbus-supply:
description: Regulator controlling USB OTG VBUS
usb1_vbus-supply:
description: Regulator controlling USB1 Host controller
usb2_vbus-supply:
description: Regulator controlling USB2 Host controller
required:
- "#phy-cells"
- compatible
- clocks
- clock-names
- reg
- reg-names
- resets
- reset-names
additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/clock/sun8i-r40-ccu.h>
#include <dt-bindings/reset/sun8i-r40-ccu.h>
phy@1c13400 {
#phy-cells = <1>;
compatible = "allwinner,sun8i-r40-usb-phy";
reg = <0x01c13400 0x14>,
<0x01c14800 0x4>,
<0x01c19800 0x4>,
<0x01c1c800 0x4>;
reg-names = "phy_ctrl",
"pmu0",
"pmu1",
"pmu2";
clocks = <&ccu CLK_USB_PHY0>,
<&ccu CLK_USB_PHY1>,
<&ccu CLK_USB_PHY2>;
clock-names = "usb0_phy",
"usb1_phy",
"usb2_phy";
resets = <&ccu RST_USB_PHY0>,
<&ccu RST_USB_PHY1>,
<&ccu RST_USB_PHY2>;
reset-names = "usb0_reset",
"usb1_reset",
"usb2_reset";
usb1_vbus-supply = <®_vcc5v0>;
usb2_vbus-supply = <®_vcc5v0>;
};
|
