1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
|
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/intel,pinctrl-thunderbay.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Intel Thunder Bay pin controller
maintainers:
- Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>
description: |
Intel Thunder Bay SoC integrates a pin controller which enables control
of pin directions, input/output values and configuration
for a total of 67 pins.
properties:
compatible:
const: intel,thunderbay-pinctrl
reg:
maxItems: 1
gpio-controller: true
'#gpio-cells':
const: 2
gpio-ranges:
maxItems: 1
interrupts:
description:
Specifies the interrupt lines to be used by the controller.
maxItems: 2
interrupt-controller: true
'#interrupt-cells':
const: 2
patternProperties:
'^gpio@[0-9a-f]*$':
type: object
additionalProperties: false
description:
Child nodes can be specified to contain pin configuration information,
which can then be utilized by pinctrl client devices.
The following properties are supported.
properties:
pins:
description: |
The name(s) of the pins to be configured in the child node.
Supported pin names are "GPIO0" up to "GPIO66".
bias-disable: true
bias-pull-down: true
bias-pull-up: true
drive-strength:
description: Drive strength for the pad.
enum: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
bias-bus-hold:
type: boolean
input-schmitt-enable:
type: boolean
slew-rate:
description: GPIO slew rate control.
0 - Slow
1 - Fast
enum: [0, 1]
additionalProperties: false
required:
- compatible
- reg
- gpio-controller
- '#gpio-cells'
- gpio-ranges
- interrupts
- interrupt-controller
- '#interrupt-cells'
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
// Example 1
pinctrl0: gpio@0 {
compatible = "intel,thunderbay-pinctrl";
reg = <0x600b0000 0x88>;
gpio-controller;
#gpio-cells = <0x2>;
gpio-ranges = <&pinctrl0 0 0 67>;
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
};
// Example 2
pinctrl1: gpio@1 {
compatible = "intel,thunderbay-pinctrl";
reg = <0x600c0000 0x88>;
gpio-controller;
#gpio-cells = <0x2>;
gpio-ranges = <&pinctrl1 0 0 53>;
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
};
|
