1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
|
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2012 Invensense, Inc.
*/
#include <linux/pm_runtime.h>
#include "inv_mpu_iio.h"
static unsigned int inv_scan_query_mpu6050(struct iio_dev *indio_dev)
{
struct inv_mpu6050_state *st = iio_priv(indio_dev);
unsigned int mask;
/*
* If the MPU6050 is just used as a trigger, then the scan mask
* is not allocated so we simply enable the temperature channel
* as a dummy and bail out.
*/
if (!indio_dev->active_scan_mask) {
st->chip_config.temp_fifo_enable = true;
return INV_MPU6050_SENSOR_TEMP;
}
st->chip_config.gyro_fifo_enable =
test_bit(INV_MPU6050_SCAN_GYRO_X,
indio_dev->active_scan_mask) ||
test_bit(INV_MPU6050_SCAN_GYRO_Y,
indio_dev->active_scan_mask) ||
test_bit(INV_MPU6050_SCAN_GYRO_Z,
indio_dev->active_scan_mask);
st->chip_config.accl_fifo_enable =
test_bit(INV_MPU6050_SCAN_ACCL_X,
indio_dev->active_scan_mask) ||
test_bit(INV_MPU6050_SCAN_ACCL_Y,
indio_dev->active_scan_mask) ||
test_bit(INV_MPU6050_SCAN_ACCL_Z,
indio_dev->active_scan_mask);
st->chip_config.temp_fifo_enable =
test_bit(INV_MPU6050_SCAN_TEMP, indio_dev->active_scan_mask);
mask = 0;
if (st->chip_config.gyro_fifo_enable)
mask |= INV_MPU6050_SENSOR_GYRO;
if (st->chip_config.accl_fifo_enable)
mask |= INV_MPU6050_SENSOR_ACCL;
if (st->chip_config.temp_fifo_enable)
mask |= INV_MPU6050_SENSOR_TEMP;
return mask;
}
static unsigned int inv_scan_query_mpu9x50(struct iio_dev *indio_dev)
{
struct inv_mpu6050_state *st = iio_priv(indio_dev);
unsigned int mask;
mask = inv_scan_query_mpu6050(indio_dev);
/* no magnetometer if i2c auxiliary bus is used */
if (st->magn_disabled)
return mask;
st->chip_config.magn_fifo_enable =
test_bit(INV_MPU9X50_SCAN_MAGN_X,
indio_dev->active_scan_mask) ||
test_bit(INV_MPU9X50_SCAN_MAGN_Y,
indio_dev->active_scan_mask) ||
test_bit(INV_MPU9X50_SCAN_MAGN_Z,
indio_dev->active_scan_mask);
if (st->chip_config.magn_fifo_enable)
mask |= INV_MPU6050_SENSOR_MAGN;
return mask;
}
static unsigned int inv_scan_query(struct iio_dev *indio_dev)
{
struct inv_mpu6050_state *st = iio_priv(indio_dev);
switch (st->chip_type) {
case INV_MPU9150:
case INV_MPU9250:
case INV_MPU9255:
return inv_scan_query_mpu9x50(indio_dev);
default:
return inv_scan_query_mpu6050(indio_dev);
}
}
static unsigned int inv_compute_skip_samples(const struct inv_mpu6050_state *st)
{
unsigned int skip_samples = 0;
/* mag first sample is always not ready, skip it */
if (st->chip_config.magn_fifo_enable)
skip_samples = 1;
return skip_samples;
}
int inv_mpu6050_prepare_fifo(struct inv_mpu6050_state *st, bool enable)
{
uint8_t d;
int ret;
if (enable) {
st->it_timestamp = 0;
/* reset FIFO */
d = st->chip_config.user_ctrl | INV_MPU6050_BIT_FIFO_RST;
ret = regmap_write(st->map, st->reg->user_ctrl, d);
if (ret)
return ret;
/* enable sensor output to FIFO */
d = 0;
if (st->chip_config.gyro_fifo_enable)
d |= INV_MPU6050_BITS_GYRO_OUT;
if (st->chip_config.accl_fifo_enable)
d |= INV_MPU6050_BIT_ACCEL_OUT;
if (st->chip_config.temp_fifo_enable)
d |= INV_MPU6050_BIT_TEMP_OUT;
if (st->chip_config.magn_fifo_enable)
d |= INV_MPU6050_BIT_SLAVE_0;
ret = regmap_write(st->map, st->reg->fifo_en, d);
if (ret)
return ret;
/* enable FIFO reading */
d = st->chip_config.user_ctrl | INV_MPU6050_BIT_FIFO_EN;
ret = regmap_write(st->map, st->reg->user_ctrl, d);
if (ret)
return ret;
/* enable interrupt */
ret = regmap_write(st->map, st->reg->int_enable,
INV_MPU6050_BIT_DATA_RDY_EN);
} else {
ret = regmap_write(st->map, st->reg->int_enable, 0);
if (ret)
return ret;
ret = regmap_write(st->map, st->reg->fifo_en, 0);
if (ret)
return ret;
/* restore user_ctrl for disabling FIFO reading */
ret = regmap_write(st->map, st->reg->user_ctrl,
st->chip_config.user_ctrl);
}
return ret;
}
/**
* inv_mpu6050_set_enable() - enable chip functions.
* @indio_dev: Device driver instance.
* @enable: enable/disable
*/
static int inv_mpu6050_set_enable(struct iio_dev *indio_dev, bool enable)
{
struct inv_mpu6050_state *st = iio_priv(indio_dev);
struct device *pdev = regmap_get_device(st->map);
unsigned int scan;
int result;
if (enable) {
scan = inv_scan_query(indio_dev);
result = pm_runtime_resume_and_get(pdev);
if (result)
return result;
/*
* In case autosuspend didn't trigger, turn off first not
* required sensors.
*/
result = inv_mpu6050_switch_engine(st, false, ~scan);
if (result)
goto error_power_off;
result = inv_mpu6050_switch_engine(st, true, scan);
if (result)
goto error_power_off;
st->skip_samples = inv_compute_skip_samples(st);
result = inv_mpu6050_prepare_fifo(st, true);
if (result)
goto error_power_off;
} else {
result = inv_mpu6050_prepare_fifo(st, false);
if (result)
goto error_power_off;
pm_runtime_mark_last_busy(pdev);
pm_runtime_put_autosuspend(pdev);
}
return 0;
error_power_off:
pm_runtime_put_autosuspend(pdev);
return result;
}
/**
* inv_mpu_data_rdy_trigger_set_state() - set data ready interrupt state
* @trig: Trigger instance
* @state: Desired trigger state
*/
static int inv_mpu_data_rdy_trigger_set_state(struct iio_trigger *trig,
bool state)
{
struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
struct inv_mpu6050_state *st = iio_priv(indio_dev);
int result;
mutex_lock(&st->lock);
result = inv_mpu6050_set_enable(indio_dev, state);
mutex_unlock(&st->lock);
return result;
}
static const struct iio_trigger_ops inv_mpu_trigger_ops = {
.set_trigger_state = &inv_mpu_data_rdy_trigger_set_state,
};
int inv_mpu6050_probe_trigger(struct iio_dev *indio_dev, int irq_type)
{
int ret;
struct inv_mpu6050_state *st = iio_priv(indio_dev);
st->trig = devm_iio_trigger_alloc(&indio_dev->dev,
"%s-dev%d",
indio_dev->name,
iio_device_id(indio_dev));
if (!st->trig)
return -ENOMEM;
ret = devm_request_irq(&indio_dev->dev, st->irq,
&iio_trigger_generic_data_rdy_poll,
irq_type,
"inv_mpu",
st->trig);
if (ret)
return ret;
st->trig->dev.parent = regmap_get_device(st->map);
st->trig->ops = &inv_mpu_trigger_ops;
iio_trigger_set_drvdata(st->trig, indio_dev);
ret = devm_iio_trigger_register(&indio_dev->dev, st->trig);
if (ret)
return ret;
indio_dev->trig = iio_trigger_get(st->trig);
return 0;
}
|
