diff options
Diffstat (limited to 'ssh-add.0')
| -rw-r--r-- | ssh-add.0 | 203 |
1 files changed, 203 insertions, 0 deletions
diff --git a/ssh-add.0 b/ssh-add.0 new file mode 100644 index 0000000..ac7d079 --- /dev/null +++ b/ssh-add.0 @@ -0,0 +1,203 @@ +SSH-ADD(1) General Commands Manual SSH-ADD(1) + +NAME + ssh-add M-bM-^@M-^S adds private key identities to the OpenSSH authentication agent + +SYNOPSIS + ssh-add [-cDdKkLlqvXx] [-E fingerprint_hash] [-H hostkey_file] + [-h destination_constraint] [-S provider] [-t life] [file ...] + ssh-add -s pkcs11 + ssh-add -e pkcs11 + ssh-add -T pubkey ... + +DESCRIPTION + ssh-add adds private key identities to the authentication agent, + ssh-agent(1). When run without arguments, it adds the files + ~/.ssh/id_rsa, ~/.ssh/id_ecdsa, ~/.ssh/id_ecdsa_sk, ~/.ssh/id_ed25519, + ~/.ssh/id_ed25519_sk, and ~/.ssh/id_dsa. After loading a private key, + ssh-add will try to load corresponding certificate information from the + filename obtained by appending -cert.pub to the name of the private key + file. Alternative file names can be given on the command line. + + If any file requires a passphrase, ssh-add asks for the passphrase from + the user. The passphrase is read from the user's tty. ssh-add retries + the last passphrase if multiple identity files are given. + + The authentication agent must be running and the SSH_AUTH_SOCK + environment variable must contain the name of its socket for ssh-add to + work. + + The options are as follows: + + -c Indicates that added identities should be subject to confirmation + before being used for authentication. Confirmation is performed + by ssh-askpass(1). Successful confirmation is signaled by a zero + exit status from ssh-askpass(1), rather than text entered into + the requester. + + -D Deletes all identities from the agent. + + -d Instead of adding identities, removes identities from the agent. + If ssh-add has been run without arguments, the keys for the + default identities and their corresponding certificates will be + removed. Otherwise, the argument list will be interpreted as a + list of paths to public key files to specify keys and + certificates to be removed from the agent. If no public key is + found at a given path, ssh-add will append .pub and retry. If + the argument list consists of M-bM-^@M-^\-M-bM-^@M-^] then ssh-add will read public + keys to be removed from standard input. + + -E fingerprint_hash + Specifies the hash algorithm used when displaying key + fingerprints. Valid options are: M-bM-^@M-^\md5M-bM-^@M-^] and M-bM-^@M-^\sha256M-bM-^@M-^]. The + default is M-bM-^@M-^\sha256M-bM-^@M-^]. + + -e pkcs11 + Remove keys provided by the PKCS#11 shared library pkcs11. + + -H hostkey_file + Specifies a known hosts file to look up hostkeys when using + destination-constrained keys via the -h flag. This option may be + specified multiple times to allow multiple files to be searched. + If no files are specified, ssh-add will use the default + ssh_config(5) known hosts files: ~/.ssh/known_hosts, + ~/.ssh/known_hosts2, /etc/ssh/ssh_known_hosts, and + /etc/ssh/ssh_known_hosts2. + + -h destination_constraint + When adding keys, constrain them to be usable only through + specific hosts or to specific destinations. + + Destination constraints of the form M-bM-^@M-^X[user@]dest-hostnameM-bM-^@M-^Y permit + use of the key only from the origin host (the one running + ssh-agent(1)) to the listed destination host, with optional user + name. + + Constraints of the form M-bM-^@M-^Xsrc-hostname>[user@]dst-hostnameM-bM-^@M-^Y allow + a key available on a forwarded ssh-agent(1) to be used through a + particular host (as specified by M-bM-^@M-^Xsrc-hostnameM-bM-^@M-^Y) to authenticate + to a further host, specified by M-bM-^@M-^Xdst-hostnameM-bM-^@M-^Y. + + Multiple destination constraints may be added when loading keys. + When attempting authentication with a key that has destination + constraints, the whole connection path, including ssh-agent(1) + forwarding, is tested against those constraints and each hop must + be permitted for the attempt to succeed. For example, if key is + forwarded to a remote host, M-bM-^@M-^Xhost-bM-bM-^@M-^Y, and is attempting + authentication to another host, M-bM-^@M-^Xhost-cM-bM-^@M-^Y, then the operation will + be successful only if M-bM-^@M-^Xhost-bM-bM-^@M-^Y was permitted from the origin host + and the subsequent M-bM-^@M-^Xhost-b>host-cM-bM-^@M-^Y hop is also permitted by + destination constraints. + + Hosts are identified by their host keys, and are looked up from + known hosts files by ssh-add. Wildcards patterns may be used for + hostnames and certificate host keys are supported. By default, + keys added by ssh-add are not destination constrained. + + Destination constraints were added in OpenSSH release 8.9. + Support in both the remote SSH client and server is required when + using destination-constrained keys over a forwarded ssh-agent(1) + channel. + + It is also important to note that destination constraints can + only be enforced by ssh-agent(1) when a key is used, or when it + is forwarded by a cooperating ssh(1). Specifically, it does not + prevent an attacker with access to a remote SSH_AUTH_SOCK from + forwarding it again and using it on a different host (but only to + a permitted destination). + + -K Load resident keys from a FIDO authenticator. + + -k When loading keys into or deleting keys from the agent, process + plain private keys only and skip certificates. + + -L Lists public key parameters of all identities currently + represented by the agent. + + -l Lists fingerprints of all identities currently represented by the + agent. + + -q Be quiet after a successful operation. + + -S provider + Specifies a path to a library that will be used when adding FIDO + authenticator-hosted keys, overriding the default of using the + internal USB HID support. + + -s pkcs11 + Add keys provided by the PKCS#11 shared library pkcs11. + + -T pubkey ... + Tests whether the private keys that correspond to the specified + pubkey files are usable by performing sign and verify operations + on each. + + -t life + Set a maximum lifetime when adding identities to an agent. The + lifetime may be specified in seconds or in a time format + specified in sshd_config(5). + + -v Verbose mode. Causes ssh-add to print debugging messages about + its progress. This is helpful in debugging problems. Multiple + -v options increase the verbosity. The maximum is 3. + + -X Unlock the agent. + + -x Lock the agent with a password. + +ENVIRONMENT + DISPLAY, SSH_ASKPASS and SSH_ASKPASS_REQUIRE + If ssh-add needs a passphrase, it will read the passphrase from + the current terminal if it was run from a terminal. If ssh-add + does not have a terminal associated with it but DISPLAY and + SSH_ASKPASS are set, it will execute the program specified by + SSH_ASKPASS (by default M-bM-^@M-^\ssh-askpassM-bM-^@M-^]) and open an X11 window to + read the passphrase. This is particularly useful when calling + ssh-add from a .xsession or related script. + + SSH_ASKPASS_REQUIRE allows further control over the use of an + askpass program. If this variable is set to M-bM-^@M-^\neverM-bM-^@M-^] then ssh-add + will never attempt to use one. If it is set to M-bM-^@M-^\preferM-bM-^@M-^], then + ssh-add will prefer to use the askpass program instead of the TTY + when requesting passwords. Finally, if the variable is set to + M-bM-^@M-^\forceM-bM-^@M-^], then the askpass program will be used for all passphrase + input regardless of whether DISPLAY is set. + + SSH_AUTH_SOCK + Identifies the path of a UNIX-domain socket used to communicate + with the agent. + + SSH_SK_PROVIDER + Specifies a path to a library that will be used when loading any + FIDO authenticator-hosted keys, overriding the default of using + the built-in USB HID support. + +FILES + ~/.ssh/id_dsa + ~/.ssh/id_ecdsa + ~/.ssh/id_ecdsa_sk + ~/.ssh/id_ed25519 + ~/.ssh/id_ed25519_sk + ~/.ssh/id_rsa + Contains the DSA, ECDSA, authenticator-hosted ECDSA, Ed25519, + authenticator-hosted Ed25519 or RSA authentication identity of + the user. + + Identity files should not be readable by anyone but the user. Note that + ssh-add ignores identity files if they are accessible by others. + +EXIT STATUS + Exit status is 0 on success, 1 if the specified command fails, and 2 if + ssh-add is unable to contact the authentication agent. + +SEE ALSO + ssh(1), ssh-agent(1), ssh-askpass(1), ssh-keygen(1), sshd(8) + +AUTHORS + OpenSSH is a derivative of the original and free ssh 1.2.12 release by + Tatu Ylonen. Aaron Campbell, Bob Beck, Markus Friedl, Niels Provos, Theo + de Raadt and Dug Song removed many bugs, re-added newer features and + created OpenSSH. Markus Friedl contributed the support for SSH protocol + versions 1.5 and 2.0. + +OpenBSD 7.2 February 4, 2022 OpenBSD 7.2 |