From 6c20c8ed2cb9ab69a1a57ccb2b9b79969a808321 Mon Sep 17 00:00:00 2001
From: Daniel Baumann <daniel.baumann@progress-linux.org>
Date: Sun, 7 Apr 2024 17:38:56 +0200
Subject: Adding upstream version 5.2.15.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
---
 examples/functions/autoload.v4 | 556 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 556 insertions(+)
 create mode 100644 examples/functions/autoload.v4

(limited to 'examples/functions/autoload.v4')

diff --git a/examples/functions/autoload.v4 b/examples/functions/autoload.v4
new file mode 100644
index 0000000..850c614
--- /dev/null
+++ b/examples/functions/autoload.v4
@@ -0,0 +1,556 @@
+## -*- sh -*-
+
+# The psuedo-ksh autoloader.
+
+# How to use:
+# o One function per file.
+# o File and function name match exactly.
+# o File is located in a directory that is in FPATH.
+# o This script (autoload) must be sourced in as early as possible. This
+#   implies that any code in this script should NOT rely on any library of local
+#   or self-defined functions having already been loaded.
+# o autoload must be called for each function before the function can be used. If
+#   autoloads are in directories where there are nothing but autoloads, then
+#   'autoload /path/to/files/*' suffices (but see options -a and -f).
+# o The call must be made in the current environment, not a subshell.
+# o The command line suffices as "current environment". If you have autoload
+#   calls in a script, that script must be dotted into the process.
+
+# The first cut of this was by Bill Trost, trost@reed.bitnet.
+# The second cut came from Chet Ramey, chet@ins.CWRU.Edu
+# The third cut came from Mark Kennedy, mtk@ny.ubs.com.  1998/08/25
+# The fourth cut came from Matthew Persico, matthew.persico@gmail.com 2017/August
+
+autoload_calc_shimsize ()
+{
+    echo $((AUTOLOAD_SHIM_OVERHEAD + 3 * ${#1}))
+}
+
+_autoload_split_fpath ()
+{
+    (IFS=':'; set -- ${FPATH}; echo "$@")
+}
+
+_aload()
+{
+    local opt OPTIND
+    local doexport=0
+    local doreload=0
+    local doverbose=0
+    local doevalshim=0
+    local loadthese
+    local optimize=0
+    local loaded=0
+    local exported=0
+    local optimized=0
+    local summary=0
+    local dofpath=0
+    while getopts xrvla:oyf opt; do
+        case $opt in
+            x) doexport=1;;
+            r) doreload=1;;
+            v) doverbose=1;;
+            l) doevalshim=1;;
+            a) loadthese=$(find $OPTARG -maxdepth 1 -type f -printf '%f ');;
+            o) optimize=1;;
+            y) summary=1;;
+            f) loadthese=$(find $(_autoload_split_fpath) -maxdepth 1 -type f -printf '%f ');;
+            *) echo "_aload: usage: _aload [-xrvlyf] [-a dir] [function ...]" >&2; return;;
+        esac
+    done
+
+    shift $(($OPTIND-1))
+
+    [ -z "$loadthese" ] && loadthese="$@"
+
+    local func
+    for func in $loadthese; do
+        local exists_fn
+        exists_fn=$(declare -F $func)
+        if [ -n "$exists_fn" ] && ((doreload==0)) && ((doevalshim==0))
+        then
+            if ((doverbose))
+            then
+                echo "autoload: function '$func' already exists"
+            fi
+        else
+            local andevaled=''
+            local andexported=''
+            local evalstat=0
+            local doshim=1
+            local funcfile
+            funcfile=$(_autoload_resolve $func)
+            if [[ $funcfile ]] ; then
+                ## The file was found for $func. Process it.
+
+                if ((optimize)); then
+                    ## For the first function loaded, we will not know
+                    ## AUTOLOAD_SHIM_OVERHEAD. We can only calculate it after
+                    ## we have loaded one function.
+                    if [[ $AUTOLOAD_SHIM_OVERHEAD ]]; then
+                        local size=$(wc -c $funcfile| sed 's/ .*//')
+                        local shimsize=$(autoload_calc_shimsize $func)
+                        if (( size <= shimsize)); then
+                            doshim=0
+                            andevaled=', optimized'
+                            ((optimized+=1))
+                        fi
+                    fi
+                fi
+
+                if ((doevalshim)); then
+                    doshim=0
+                    andevaled=', evaled'
+                fi
+
+                ## 'brand' as in branding a cow with a mark. We add a local
+                ## variable to each function we autoload so that we can tell
+                ## later on it is an autoloaded function without having to
+                ## maintain some bash array or hash that cannot be passed to
+                ## and used by subshells.
+                local brandtext
+                brandtext="eval \"\$(type $func | sed -e 1d -e 4ilocal\\ AUTOLOADED=\'$func\')\""
+                if ((doshim)); then
+                    ## Don't bother trying to save space by shoving all the
+                    ## eval text below onto one unreadable line; new lines will
+                    ## be added at your semicolons and any indentation below
+                    ## seems to be ignored anyway if you export the function;
+                    ## look at its BASH_FUNCTION representation.
+                    eval $func '()
+                    {
+                    local IS_SHIM="$func"
+                    local file=$(_autoload_resolve '$func')
+                    if [[ $file ]]
+                    then
+                        . $file
+                        '$brandtext'
+                        '$func' "$@"
+                        return $?
+                    else
+                        return 1;
+                    fi
+                    }'
+                else
+                    . $funcfile
+                    eval "$brandtext"
+                fi
+                evalstat=$?
+                if((evalstat==0))
+                then
+                    ((loaded+=1))
+                    ((doexport)) && export -f $func && andexported=', exported' && ((exported+=1))
+                    ((doverbose)) && echo "$func autoloaded${andexported}${andevaled}"
+                    if [[ ! $AUTOLOAD_SHIM_OVERHEAD ]] && ((doshim)); then
+                        ## ...we have just loaded the first function shim into
+                        ## memory. Let's calc the AUTOLOAD_SHIM_OVERHEAD size
+                        ## to use going forward. In theory, we could check
+                        ## again here to see if we should optimize and source
+                        ## in this function, now that we now the
+                        ## AUTOLOAD_SHIM_OVERHEAD. In practice, it's not worth
+                        ## duping that code or creating a function to do so for
+                        ## one function.
+                        AUTOLOAD_SHIM_OVERHEAD=$(type $func | grep -v -E "^$1 is a function" | sed "s/$func//g"| wc -c)
+                        export AUTOLOAD_SHIM_OVERHEAD
+                    fi
+                else
+                    echo "$func failed to load" >&2
+                fi
+            fi
+        fi
+    done
+    ((summary)) && echo "autoload: loaded:$loaded exported:$exported optimized:$optimized overhead:$AUTOLOAD_SHIM_OVERHEAD bytes"
+}
+
+_autoload_dump()
+{
+    local opt OPTIND
+    local opt_p=''
+    local opt_s=''
+    while getopts ps opt
+    do
+        case $opt in
+            p ) opt_p=1;;
+            s ) opt_s=1;;
+        esac
+    done
+
+    shift $(($OPTIND-1))
+
+    local exported=''
+    local executed=''
+    local func
+    for func in $(declare | grep -E 'local\\{0,1} AUTOLOADED' | sed -e "s/.*AUTOLOADED=//" -e 's/\\//g' -e 's/[");]//g' -e "s/'//g")
+    do
+        if [ -n "$opt_p" ]; then echo -n "autoload "; fi
+        if [ -n "$opt_s" ]
+        then
+            exported=$(declare -F | grep -E "${func}$" | sed 's/declare -f\(x\{0,1\}\).*/\1/')
+            [ "$exported" = 'x' ] && exported=' exported' || exported=' not exported'
+            executed=$(type $func | grep 'local IS_SHIM')
+            [ -z "$executed" ] && executed=' executed' || executed=' not executed'
+        fi
+        echo "${func}${exported}${executed}"
+    done
+}
+
+_autoload_resolve()
+{
+    if [[ ! "$FPATH" ]]; then
+        echo "autoload: FPATH not set or null" >&2
+        return
+    fi
+
+    local p # for 'path'. The $() commands in the for loop split the FPATH
+            # string into its constituents so that each one may be processed.
+
+    for p in $( _autoload_split_fpath ); do
+        p=${p:-.}
+        if [ -f $p/$1 ]; then echo $p/$1; return; fi
+    done
+
+    echo "autoload: $1: function source file not found" >&2
+}
+
+_autoload_edit()
+{
+    [ -z "$EDITOR" ] && echo "Error: no EDITOR defined" && return 1
+    local toedit
+    local func
+    for func in "$@"
+    do
+        local file=$(_autoload_resolve $func)
+        if [[ $file ]]
+        then
+            toedit="$toedit $file"
+        else
+            echo "$funcname not found in FPATH funcfile. Skipping."
+        fi
+    done
+
+    [ -z "$toedit" ] && return 1
+
+    local timemarker=$(mktemp)
+
+    $EDITOR $toedit
+
+    local i
+    for i in $toedit
+    do
+        if [ $i -nt $timemarker ]
+        then
+            local f=$(basename $i)
+            echo Reloading $f
+            autoload -r $f
+        fi
+    done
+}
+
+_autoload_page()
+{
+    [ -z "$PAGER" ] && echo "Error: no PAGER defined" && return 1
+    local topage
+    local func
+    for func in "$@"
+    do
+        local file=$(_autoload_resolve $func)
+        if [[ $file ]]
+        then
+            topage="$topage $file"
+        else
+            echo "$funcname not found in FPATH funcfile. Skipping."
+        fi
+    done
+
+    [ -z "$topage" ] && return 1
+
+    $PAGER $topage
+}
+
+_autoload_remove()
+{
+    unset -f "$@"
+}
+
+_autoload_help()
+{
+    cat <<EOH
+NAME
+        autoload
+
+SYNOPSIS
+        autoload [-ps]
+        autoload [-xuremloyv] [function ...]
+        autoload -a directory [-oyv]
+        autoload -f [-oyv]
+        autoload [-h]
+
+        autoreload [function ...]
+
+DESCRIPTION
+
+        An implementation of the 'autoload' functionality built into other
+        shells, of which 'ksh' is the most prominent.  It allows for a keeping
+        the process environment small by loading small 'shim' functions into
+        memory that will, on first call, load the full text of the given
+        function and run it. Subsequent calls to the function just run the
+        function.
+
+        'autoreload' is a synonym for 'autoload -r'. See below.
+
+USAGE
+
+        o Each function to be autoloaded should be defined in a single file,
+          named exactly the same as the function.
+
+        o In order to avoid side effects, do NOT put code other than the
+          function definition in the file. Unless of course you want to do some
+          one-time initialization. But beware that if you reload the function
+          for any reason, you will rerun the initialization code. Make sure
+          your initialization is re-entrant. Or, better yet,
+
+          *** do NOT put code other than the function definition in the file ***
+
+        o These function definition files should be placed in a directory that
+          is in the FPATH environment variable. Subdirectories are NOT scanned.
+
+        o The autoload script should be sourced into the current process as
+          early as possible in process start up. See NOTES below for
+          suggestions.
+
+        o The calls to the autoload function must be made in the current
+          process. If your calls are in their own script, that script must be
+          sourced in. Command line invocations are also sufficient. (But see
+          '-l' below.)
+
+        o The first time the function is called, the shim function that was
+          created by the 'autoload' call is what is executed. This function
+          then goes and finds the appropriate file in FPATH, sources it in and
+          then calls the actual function with any arguments you just passed in
+          to the shim function. Subsequent calls just run the function.
+
+OPTIONS
+
+        -a Autoload (a)ll the functions found in the given directory.
+
+        -f Autoload all the functions found in all the directories on the
+           FPATH.
+
+        -p Print all the autoloaded functions.
+
+        -s Print all the autoloaded functions and add their export status.
+
+        -x Export the specified functions to the environment for use in
+           subshells.
+
+        -u Unset the function, so it can be reloaded.
+
+        -r Reload the shims of the specified functions, even if the functions
+           have been already been executed.  This will allow you to modify the
+           functions' source and have the new version executed next time the
+           function is called.
+
+           It would be very easy to modify a function's script, run the
+           function and scratch your head for a long time trying to figure out
+           why your changes are not being executed. That's why we provide the
+           '-e' flag described below for modifications.
+
+           Reloads, of course, only apply in the context of the current session
+           and any future subshell you start from the current session. Existing
+           sessions will need to have the same 'autoload -r' command run in
+           them.
+
+        -e Find the scripts in which the specified functions are defined and
+           start up \$EDITOR on those scripts. Reload the ones that were
+           modified when you exit \$EDITOR. (Note: If you use 'autoload -e foo'
+           to edit function 'foo', and then in your editor you separately load
+           up function 'bar', 'autoload' has no way of knowing that you edited
+           'bar' and will NOT reload 'bar' for you.)
+
+           Reloads, of course, only apply in the context of the current session
+           and any future subshell you start from the current session. Existing
+           sessions will need to have the same 'autoload -r' command run in
+           them.
+
+        -m Find the scripts in which the specified functions are defined and
+           run \$PAGER on them ('m' is for 'more', because 'p' (page) and 'l'
+           (load) are already used as options in 'autoload').
+
+        -l When autoloading a function, eval the shim immediately in order to
+           load the true function code. See "Using '-l'" in the NOTES below for
+           details.
+
+        -o Optimize. When autoloading, take the time to execute
+
+               'theCharCount=\$(wc -c \$theFuncFile)'
+
+           for each function and
+
+                if \$theCharCount < \$AUTOLOAD_SHIM_OVERHEAD
+
+           don't shim it, just eval directly.
+
+        -y Summar(y). Print the number of loaded, exported and optimized
+           functions.
+
+        -v Turns up the chattiness.
+
+NOTES
+
+        o Calling 'autoload' on a function that already exists (either shimmed
+          or expanded) silently ignores the request to load the shim unless it
+          has been previously removed (-u) or you force the reload (-r).
+
+        o Changing and reloading a function that has been exported does not
+          require it be re-exported; the modifications will appear in
+          subsequent subshells.
+
+        o Using '-1'
+
+          If you are running under set -x and/or set -v, you may see that the
+          shim does not appear to "work"; instead of seeing the shim first and
+          the real code subsequently, you may see the shim evaluated multiple
+          times.
+
+          This may not be an error; review your code. What is most likely
+          happening is that you are calling the function in subshells via
+          backticks or $(), or in a script that is not being sourced into the
+          current environment. If you have not previously called the function
+          in question at your command line or in a script that was sourced into
+          the current environment, then the various subshells are going to
+          encounter the shim and replace with the real code before executing.
+
+          Remember, however, that environment modifications that occur in a
+          subshell are NOT propagated back to the calling shell or over to any
+          sibling shells. So, if you call an autoloaded function in a very
+          tight loop of very many subshells, you may want to make an 'autoload
+          -l' call before you start your loop. '-l' will instruct 'autoload' to
+          bypass the shim creation and just source in the function's file
+          directly. For a few calls, the overhead of repeatedly running the
+          shim is not expensive, but in a tight loop, it might be. Caveat
+          Programmer.
+
+        o Although the number of functions in the environment does not change
+          by using 'autoload', the amount of memory they take up can be greatly
+          reduced, depending on the size of your functions. If you have a lot
+          of small functions, then it is possible that the shim text will be
+          larger than your actual functions, rendering the memory savings moot.
+
+          'small' in this case can be determined by calling the function
+          'autoload_calc_shimsize' with the name of the function to determine
+          its shim size.
+
+        o In order to support the -p and -s options, we need a way to determine
+          if a function 'func' has been autoloaded or if it was loaded
+          diredctly. In order to do that, we modify the function's code by
+          adding the text
+
+              local  AUTOLOADED='func';
+
+          to the shim and to the actual function text, just after the opening
+          brace. Then supporting -p and -s is just a matter of grepping through
+          all the function text in memory. Even though grepping through the
+          environment may not be the most efficient way to support this, it is
+          the simplest to implement for -p and -s operations that are not
+          heavily used.
+
+          As a consequence of this (and other reasons), the AUTOLOAD* namespace
+          is reserved for autoloading. Make sure you check any functions that
+          you bring under autoload for use of variables or functions that start
+          with AUTOLOAD and change them.
+
+        o The easiest way to load shims for all functions on the FPATH is to run
+
+               autoload -f -x
+
+          in the profile that gets run for login shells.
+
+          When called in the profile of a login shell where no definitions
+          exist, -f will load all functions it can find on FPATH and -x will
+          export all of those functions to be available in subshells when this
+          is called in a login shell. Using this option will relieve you of the
+          need to call 'autoload' after Every Single Function Definition, nor
+          will you need to call it in subshells.
+
+          The only thing left to do is to load up the autoload function itself
+          and its helper functions. That needs to happen in your profile:
+
+            export FPATH=~/functions       # or wherever you stash them
+            if [ -z $(declare -F autoload) ]
+            then
+              . ~/bin/autoload             # or wherever you've put it
+            fi
+
+          The 'if' statement is used to make sure we don't reload autoload
+          needlessly. Sourcing in the autoload script loads the 'autoload'
+          function and all of its support functions. Additionally, we export
+          all of these functions so that they are available in subshells; you
+          do not have to re-source the autoload file in '.bashrc'.
+
+        o Even with all of these shenanigans, you will find cases where no
+          matter how hard you try, your autoloaded functions will be
+          unavailable to you, even if you run 'autoload -x -f'. The typical
+          condition for this is starting up not a subshell, but a brand new
+          DIFFERENT shell. And the typical example of this is git extensions.
+
+          At the time of this writing, git extensions work by taking a command
+          'git foo' and looking for a file 'git-foo' on the path. 'git' then
+          executes 'git-foo' in a new shell - it executes your command in
+          /bin/sh. That's not a subshell of your process. It will not get your
+          exported shell functions. Ballgame over.
+
+          If you find that you want your functions to be available in such
+          circumstances, convert them back to plain old scripts, make sure they
+          are 'sh' compliant and take the read/parse hit every time they are
+          run.
+
+EOH
+}
+
+autoload()
+{
+    if (( $# == 0 )) ; then _autoload_dump; return; fi
+
+    local opt OPTIND OPTARG
+    local passthru
+    local dumpopt
+    while getopts psuema:yxrvlohf opt
+    do
+        case $opt in
+            p|s) dumpopt="$dumpopt -${opt}";;
+            u) shift $((OPTIND-1)); _autoload_remove "$@"; return;;
+            e) shift $((OPTIND-1)); _autoload_edit "$@"; return;;
+            m) shift $((OPTIND-1)); _autoload_page "$@"; return;;
+            x|r|v|l|y|f|o) passthru="$passthru -$opt";;
+            a) passthru="$passthru -$opt $OPTARG";;
+            h) _autoload_help; return;;
+            *) echo "autoload: usage: autoload [-puUx] [function ...]" >&2; return;;
+        esac
+    done
+
+    shift $(($OPTIND-1))
+    if [ -n "$dumpopt" ]
+    then
+        _autoload_dump $dumpopt
+    else
+        _aload $passthru "$@"
+    fi
+}
+
+autoreload ()
+{
+    autoload -r "$@"
+}
+
+## When we source in autoload, we export (but NOT autoload) the autoload
+## functions so that they are available in subshells and you don't have to
+## source in the autoload file in subshells.
+export -f _aload \
+       _autoload_dump \
+       _autoload_edit \
+       _autoload_help \
+       _autoload_page \
+       _autoload_resolve \
+       _autoload_split_fpath \
+       autoload \
+       autoload_calc_shimsize \
+       autoreload
-- 
cgit v1.2.3