Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 310 insertions, 0 deletions

diff --git a/Documentation/ABI/testing/debugfs-driver-habanalabs b/Documentation/ABI/testing/debugfs-driver-habanalabs
new file mode 100644
index 000000000..c915bf17b
--- /dev/null
+++ b/Documentation/ABI/testing/debugfs-driver-habanalabs
@@ -0,0 +1,310 @@
+What:           /sys/kernel/debug/habanalabs/hl<n>/addr
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        ogabbay@kernel.org
+Description:    Sets the device address to be used for read or write through
+                PCI bar, or the device VA of a host mapped memory to be read or
+                written directly from the host. The latter option is allowed
+                only when the IOMMU is disabled.
+                The acceptable value is a string that starts with "0x"
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/clk_gate
+Date:           May 2020
+KernelVersion:  5.8
+Contact:        ogabbay@kernel.org
+Description:    This setting is now deprecated as clock gating is handled solely by the f/w
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/command_buffers
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        ogabbay@kernel.org
+Description:    Displays a list with information about the currently allocated
+                command buffers
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/command_submission
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        ogabbay@kernel.org
+Description:    Displays a list with information about the currently active
+                command submissions
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/command_submission_jobs
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        ogabbay@kernel.org
+Description:    Displays a list with detailed information about each JOB (CB) of
+                each active command submission
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/data32
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        ogabbay@kernel.org
+Description:    Allows the root user to read or write directly through the
+                device's PCI bar. Writing to this file generates a write
+                transaction while reading from the file generates a read
+                transaction. This custom interface is needed (instead of using
+                the generic Linux user-space PCI mapping) because the DDR bar
+                is very small compared to the DDR memory and only the driver can
+                move the bar before and after the transaction.
+
+                If the IOMMU is disabled, it also allows the root user to read
+                or write from the host a device VA of a host mapped memory
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/data64
+Date:           Jan 2020
+KernelVersion:  5.6
+Contact:        ogabbay@kernel.org
+Description:    Allows the root user to read or write 64 bit data directly
+                through the device's PCI bar. Writing to this file generates a
+                write transaction while reading from the file generates a read
+                transaction. This custom interface is needed (instead of using
+                the generic Linux user-space PCI mapping) because the DDR bar
+                is very small compared to the DDR memory and only the driver can
+                move the bar before and after the transaction.
+
+                If the IOMMU is disabled, it also allows the root user to read
+                or write from the host a device VA of a host mapped memory
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/data_dma
+Date:           Apr 2021
+KernelVersion:  5.13
+Contact:        ogabbay@kernel.org
+Description:    Allows the root user to read from the device's internal
+                memory (DRAM/SRAM) through a DMA engine.
+                This property is a binary blob that contains the result of the
+                DMA transfer.
+                This custom interface is needed (instead of using the generic
+                Linux user-space PCI mapping) because the amount of internal
+                memory is huge (>32GB) and reading it via the PCI bar will take
+                a very long time.
+                This interface doesn't support concurrency in the same device.
+                In GAUDI and GOYA, this action can cause undefined behavior
+                in case the it is done while the device is executing user
+                workloads.
+                Only supported on GAUDI at this stage.
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/device
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        ogabbay@kernel.org
+Description:    Enables the root user to set the device to specific state.
+                Valid values are "disable", "enable", "suspend", "resume".
+                User can read this property to see the valid values
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/dma_size
+Date:           Apr 2021
+KernelVersion:  5.13
+Contact:        ogabbay@kernel.org
+Description:    Specify the size of the DMA transaction when using DMA to read
+                from the device's internal memory. The value can not be larger
+                than 128MB. Writing to this value initiates the DMA transfer.
+                When the write is finished, the user can read the "data_dma"
+                blob
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/dump_razwi_events
+Date:           Aug 2022
+KernelVersion:  5.20
+Contact:        fkassabri@habana.ai
+Description:    Dumps all razwi events to dmesg if exist.
+                After reading the status register of an existing event
+                the routine will clear the status register.
+                Usage: cat dump_razwi_events
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/dump_security_violations
+Date:           Jan 2021
+KernelVersion:  5.12
+Contact:        ogabbay@kernel.org
+Description:    Dumps all security violations to dmesg. This will also ack
+                all security violations meanings those violations will not be
+                dumped next time user calls this API
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/engines
+Date:           Jul 2019
+KernelVersion:  5.3
+Contact:        ogabbay@kernel.org
+Description:    Displays the status registers values of the device engines and
+                their derived idle status
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/i2c_addr
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        ogabbay@kernel.org
+Description:    Sets I2C device address for I2C transaction that is generated
+                by the device's CPU, Not available when device is loaded with secured
+                firmware
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/i2c_bus
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        ogabbay@kernel.org
+Description:    Sets I2C bus address for I2C transaction that is generated by
+                the device's CPU, Not available when device is loaded with secured
+                firmware
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/i2c_data
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        ogabbay@kernel.org
+Description:    Triggers an I2C transaction that is generated by the device's
+                CPU. Writing to this file generates a write transaction while
+                reading from the file generates a read transaction, Not available
+                when device is loaded with secured firmware
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/i2c_len
+Date:           Dec 2021
+KernelVersion:  5.17
+Contact:        obitton@habana.ai
+Description:    Sets I2C length in bytes for I2C transaction that is generated by
+                the device's CPU, Not available when device is loaded with secured
+                firmware
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/i2c_reg
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        ogabbay@kernel.org
+Description:    Sets I2C register id for I2C transaction that is generated by
+                the device's CPU, Not available when device is loaded with secured
+                firmware
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/led0
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        ogabbay@kernel.org
+Description:    Sets the state of the first S/W led on the device, Not available
+                when device is loaded with secured firmware
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/led1
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        ogabbay@kernel.org
+Description:    Sets the state of the second S/W led on the device, Not available
+                when device is loaded with secured firmware
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/led2
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        ogabbay@kernel.org
+Description:    Sets the state of the third S/W led on the device, Not available
+                when device is loaded with secured firmware
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/memory_scrub
+Date:           May 2022
+KernelVersion:  5.19
+Contact:        dhirschfeld@habana.ai
+Description:    Allows the root user to scrub the dram memory. The scrubbing
+                value can be set using the debugfs file memory_scrub_val.
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/memory_scrub_val
+Date:           May 2022
+KernelVersion:  5.19
+Contact:        dhirschfeld@habana.ai
+Description:    The value to which the dram will be set to when the user
+                scrubs the dram using 'memory_scrub' debugfs file and
+                the scrubbing value when using module param 'memory_scrub'
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/mmu
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        ogabbay@kernel.org
+Description:    Displays the hop values and physical address for a given ASID
+                and virtual address. The user should write the ASID and VA into
+                the file and then read the file to get the result.
+                e.g. to display info about VA 0x1000 for ASID 1 you need to do:
+                echo "1 0x1000" > /sys/kernel/debug/habanalabs/hl0/mmu
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/mmu_error
+Date:           Mar 2021
+KernelVersion:  5.12
+Contact:        fkassabri@habana.ai
+Description:    Check and display page fault or access violation mmu errors for
+                all MMUs specified in mmu_cap_mask.
+                e.g. to display error info for MMU hw cap bit 9, you need to do:
+                echo "0x200" > /sys/kernel/debug/habanalabs/hl0/mmu_error
+                cat /sys/kernel/debug/habanalabs/hl0/mmu_error
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/monitor_dump
+Date:           Mar 2022
+KernelVersion:  5.19
+Contact:        osharabi@habana.ai
+Description:    Allows the root user to dump monitors status from the device's
+                protected config space.
+                This property is a binary blob that contains the result of the
+                monitors registers dump.
+                This custom interface is needed (instead of using the generic
+                Linux user-space PCI mapping) because this space is protected
+                and cannot be accessed using PCI read.
+                This interface doesn't support concurrency in the same device.
+                Only supported on GAUDI.
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/monitor_dump_trig
+Date:           Mar 2022
+KernelVersion:  5.19
+Contact:        osharabi@habana.ai
+Description:    Triggers dump of monitor data. The value to trigger the operation
+                must be 1. Triggering the monitor dump operation initiates dump of
+                current registers values of all monitors.
+                When the write is finished, the user can read the "monitor_dump"
+                blob
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/set_power_state
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        ogabbay@kernel.org
+Description:    Sets the PCI power state. Valid values are "1" for D0 and "2"
+                for D3Hot
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/skip_reset_on_timeout
+Date:           Jun 2021
+KernelVersion:  5.13
+Contact:        ynudelman@habana.ai
+Description:    Sets the skip reset on timeout option for the device. Value of
+                "0" means device will be reset in case some CS has timed out,
+                otherwise it will not be reset.
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/state_dump
+Date:           Oct 2021
+KernelVersion:  5.15
+Contact:        ynudelman@habana.ai
+Description:    Gets the state dump occurring on a CS timeout or failure.
+                State dump is used for debug and is created each time in case of
+                a problem in a CS execution, before reset.
+                Reading from the node returns the newest state dump available.
+                Writing an integer X discards X state dumps, so that the
+                next read would return X+1-st newest state dump.
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/stop_on_err
+Date:           Mar 2020
+KernelVersion:  5.6
+Contact:        ogabbay@kernel.org
+Description:    Sets the stop-on_error option for the device engines. Value of
+                "0" is for disable, otherwise enable.
+                Relevant only for GOYA and GAUDI.
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/timeout_locked
+Date:           Sep 2021
+KernelVersion:  5.16
+Contact:        obitton@habana.ai
+Description:    Sets the command submission timeout value in seconds.
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/userptr
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        ogabbay@kernel.org
+Description:    Displays a list with information about the currently user
+                pointers (user virtual addresses) that are pinned and mapped
+                to DMA addresses
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/userptr_lookup
+Date:           Oct 2021
+KernelVersion:  5.15
+Contact:        ogabbay@kernel.org
+Description:    Allows to search for specific user pointers (user virtual
+                addresses) that are pinned and mapped to DMA addresses, and see
+                their resolution to the specific dma address.
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/vm
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        ogabbay@kernel.org
+Description:    Displays a list with information about all the active virtual
+                address mappings per ASID and all user mappings of HW blocks