Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 76 insertions, 0 deletions

diff --git a/Documentation/ABI/testing/sysfs-class-net-qmi b/Documentation/ABI/testing/sysfs-class-net-qmi
new file mode 100644
index 000000000..47e6b9732
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-net-qmi
@@ -0,0 +1,76 @@
+What:		/sys/class/net/<iface>/qmi/raw_ip
+Date:		Dec 2015
+KernelVersion:	4.4
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		Boolean.  Default: 'N'
+
+		Set this to 'Y' to change the network device link
+		framing from '802.3' to 'raw-ip'.
+
+		The netdev will change to reflect the link framing
+		mode.  The netdev is an ordinary ethernet device in
+		'802.3' mode, and the driver expects to exchange
+		frames with an ethernet header over the USB link. The
+		netdev is a headerless p-t-p device in 'raw-ip' mode,
+		and the driver expects to echange IPv4 or IPv6 packets
+		without any L2 header over the USB link.
+
+		Userspace is in full control of firmware configuration
+		through the delegation of the QMI protocol. Userspace
+		is responsible for coordination of driver and firmware
+		link framing mode, changing this setting to 'Y' if the
+		firmware is configured for 'raw-ip' mode.
+
+What:		/sys/class/net/<iface>/qmi/add_mux
+Date:		March 2017
+KernelVersion:	4.11
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		Unsigned integer.
+
+		Write a number ranging from 1 to 254 to add a qmap mux
+		based network device, supported by recent Qualcomm based
+		modems.
+
+		The network device will be called qmimux.
+
+		Userspace is in charge of managing the qmux network device
+		activation and data stream setup on the modem side by
+		using the proper QMI protocol requests.
+
+What:		/sys/class/net/<iface>/qmi/del_mux
+Date:		March 2017
+KernelVersion:	4.11
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		Unsigned integer.
+
+		Write a number ranging from 1 to 254 to delete a previously
+		created qmap mux based network device.
+
+What:		/sys/class/net/<qmimux iface>/qmap/mux_id
+Date:		January 2021
+KernelVersion:	5.12
+Contact:	Daniele Palmas <dnlplm@gmail.com>
+Description:
+		Unsigned integer
+
+		Indicates the mux id associated to the qmimux network interface
+		during its creation.
+
+What:		/sys/class/net/<iface>/qmi/pass_through
+Date:		January 2021
+KernelVersion:	5.12
+Contact:	Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
+Description:
+		Boolean.  Default: 'N'
+
+		Set this to 'Y' to enable 'pass-through' mode, allowing packets
+		in MAP format to be passed on to the stack.
+
+		Normally the rmnet driver (CONFIG_RMNET) is then used to process
+		and demultiplex these packets.
+
+		'Pass-through' mode can be enabled when the device is in
+		'raw-ip' mode only.