Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 348 insertions, 0 deletions

diff --git a/Documentation/PCI/endpoint/pci-ntb-function.rst b/Documentation/PCI/endpoint/pci-ntb-function.rst
new file mode 100644
index 000000000..3b9d836a4
--- /dev/null
+++ b/Documentation/PCI/endpoint/pci-ntb-function.rst
@@ -0,0 +1,348 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=================
+PCI NTB Function
+=================
+
+:Author: Kishon Vijay Abraham I <kishon@ti.com>
+
+PCI Non-Transparent Bridges (NTB) allow two host systems to communicate
+with each other by exposing each host as a device to the other host.
+NTBs typically support the ability to generate interrupts on the remote
+machine, expose memory ranges as BARs, and perform DMA.  They also support
+scratchpads, which are areas of memory within the NTB that are accessible
+from both machines.
+
+PCI NTB Function allows two different systems (or hosts) to communicate
+with each other by configuring the endpoint instances in such a way that
+transactions from one system are routed to the other system.
+
+In the below diagram, PCI NTB function configures the SoC with multiple
+PCI Endpoint (EP) instances in such a way that transactions from one EP
+controller are routed to the other EP controller. Once PCI NTB function
+configures the SoC with multiple EP instances, HOST1 and HOST2 can
+communicate with each other using SoC as a bridge.
+
+.. code-block:: text
+
+    +-------------+                                   +-------------+
+    |             |                                   |             |
+    |    HOST1    |                                   |    HOST2    |
+    |             |                                   |             |
+    +------^------+                                   +------^------+
+           |                                                 |
+           |                                                 |
+ +---------|-------------------------------------------------|---------+
+ |  +------v------+                                   +------v------+  |
+ |  |             |                                   |             |  |
+ |  |     EP      |                                   |     EP      |  |
+ |  | CONTROLLER1 |                                   | CONTROLLER2 |  |
+ |  |             <----------------------------------->             |  |
+ |  |             |                                   |             |  |
+ |  |             |                                   |             |  |
+ |  |             |  SoC With Multiple EP Instances   |             |  |
+ |  |             |  (Configured using NTB Function)  |             |  |
+ |  +-------------+                                   +-------------+  |
+ +---------------------------------------------------------------------+
+
+Constructs used for Implementing NTB
+====================================
+
+	1) Config Region
+	2) Self Scratchpad Registers
+	3) Peer Scratchpad Registers
+	4) Doorbell (DB) Registers
+	5) Memory Window (MW)
+
+
+Config Region:
+--------------
+
+Config Region is a construct that is specific to NTB implemented using NTB
+Endpoint Function Driver. The host and endpoint side NTB function driver will
+exchange information with each other using this region. Config Region has
+Control/Status Registers for configuring the Endpoint Controller. Host can
+write into this region for configuring the outbound Address Translation Unit
+(ATU) and to indicate the link status. Endpoint can indicate the status of
+commands issued by host in this region. Endpoint can also indicate the
+scratchpad offset and number of memory windows to the host using this region.
+
+The format of Config Region is given below. All the fields here are 32 bits.
+
+.. code-block:: text
+
+	+------------------------+
+	|         COMMAND        |
+	+------------------------+
+	|         ARGUMENT       |
+	+------------------------+
+	|         STATUS         |
+	+------------------------+
+	|         TOPOLOGY       |
+	+------------------------+
+	|    ADDRESS (LOWER 32)  |
+	+------------------------+
+	|    ADDRESS (UPPER 32)  |
+	+------------------------+
+	|           SIZE         |
+	+------------------------+
+	|   NO OF MEMORY WINDOW  |
+	+------------------------+
+	|  MEMORY WINDOW1 OFFSET |
+	+------------------------+
+	|       SPAD OFFSET      |
+	+------------------------+
+	|        SPAD COUNT      |
+	+------------------------+
+	|      DB ENTRY SIZE     |
+	+------------------------+
+	|         DB DATA        |
+	+------------------------+
+	|            :           |
+	+------------------------+
+	|            :           |
+	+------------------------+
+	|         DB DATA        |
+	+------------------------+
+
+
+  COMMAND:
+
+	NTB function supports three commands:
+
+	  CMD_CONFIGURE_DOORBELL (0x1): Command to configure doorbell. Before
+	invoking this command, the host should allocate and initialize
+	MSI/MSI-X vectors (i.e., initialize the MSI/MSI-X Capability in the
+	Endpoint). The endpoint on receiving this command will configure
+	the outbound ATU such that transactions to Doorbell BAR will be routed
+	to the MSI/MSI-X address programmed by the host. The ARGUMENT
+	register should be populated with number of DBs to configure (in the
+	lower 16 bits) and if MSI or MSI-X should be configured (BIT 16).
+
+	  CMD_CONFIGURE_MW (0x2): Command to configure memory window (MW). The
+	host invokes this command after allocating a buffer that can be
+	accessed by remote host. The allocated address should be programmed
+	in the ADDRESS register (64 bit), the size should be programmed in
+	the SIZE register and the memory window index should be programmed
+	in the ARGUMENT register. The endpoint on receiving this command
+	will configure the outbound ATU such that transactions to MW BAR
+	are routed to the address provided by the host.
+
+	  CMD_LINK_UP (0x3): Command to indicate an NTB application is
+	bound to the EP device on the host side. Once the endpoint
+	receives this command from both the hosts, the endpoint will
+	raise a LINK_UP event to both the hosts to indicate the host
+	NTB applications can start communicating with each other.
+
+  ARGUMENT:
+
+	The value of this register is based on the commands issued in
+	command register. See COMMAND section for more information.
+
+  TOPOLOGY:
+
+	Set to NTB_TOPO_B2B_USD for Primary interface
+	Set to NTB_TOPO_B2B_DSD for Secondary interface
+
+  ADDRESS/SIZE:
+
+	Address and Size to be used while configuring the memory window.
+	See "CMD_CONFIGURE_MW" for more info.
+
+  MEMORY WINDOW1 OFFSET:
+
+	Memory Window 1 and Doorbell registers are packed together in the
+	same BAR. The initial portion of the region will have doorbell
+	registers and the latter portion of the region is for memory window 1.
+	This register will specify the offset of the memory window 1.
+
+  NO OF MEMORY WINDOW:
+
+	Specifies the number of memory windows supported by the NTB device.
+
+  SPAD OFFSET:
+
+	Self scratchpad region and config region are packed together in the
+	same BAR. The initial portion of the region will have config region
+	and the latter portion of the region is for self scratchpad. This
+	register will specify the offset of the self scratchpad registers.
+
+  SPAD COUNT:
+
+	Specifies the number of scratchpad registers supported by the NTB
+	device.
+
+  DB ENTRY SIZE:
+
+	Used to determine the offset within the DB BAR that should be written
+	in order to raise doorbell. EPF NTB can use either MSI or MSI-X to
+	ring doorbell (MSI-X support will be added later). MSI uses same
+	address for all the interrupts and MSI-X can provide different
+	addresses for different interrupts. The MSI/MSI-X address is provided
+	by the host and the address it gives is based on the MSI/MSI-X
+	implementation supported by the host. For instance, ARM platform
+	using GIC ITS will have the same MSI-X address for all the interrupts.
+	In order to support all the combinations and use the same mechanism
+	for both MSI and MSI-X, EPF NTB allocates a separate region in the
+	Outbound Address Space for each of the interrupts. This region will
+	be mapped to the MSI/MSI-X address provided by the host. If a host
+	provides the same address for all the interrupts, all the regions
+	will be translated to the same address. If a host provides different
+	addresses, the regions will be translated to different addresses. This
+	will ensure there is no difference while raising the doorbell.
+
+  DB DATA:
+
+	EPF NTB supports 32 interrupts, so there are 32 DB DATA registers.
+	This holds the MSI/MSI-X data that has to be written to MSI address
+	for raising doorbell interrupt. This will be populated by EPF NTB
+	while invoking CMD_CONFIGURE_DOORBELL.
+
+Scratchpad Registers:
+---------------------
+
+  Each host has its own register space allocated in the memory of NTB endpoint
+  controller. They are both readable and writable from both sides of the bridge.
+  They are used by applications built over NTB and can be used to pass control
+  and status information between both sides of a device.
+
+  Scratchpad registers has 2 parts
+	1) Self Scratchpad: Host's own register space
+	2) Peer Scratchpad: Remote host's register space.
+
+Doorbell Registers:
+-------------------
+
+  Doorbell Registers are used by the hosts to interrupt each other.
+
+Memory Window:
+--------------
+
+  Actual transfer of data between the two hosts will happen using the
+  memory window.
+
+Modeling Constructs:
+====================
+
+There are 5 or more distinct regions (config, self scratchpad, peer
+scratchpad, doorbell, one or more memory windows) to be modeled to achieve
+NTB functionality. At least one memory window is required while more than
+one is permitted. All these regions should be mapped to BARs for hosts to
+access these regions.
+
+If one 32-bit BAR is allocated for each of these regions, the scheme would
+look like this:
+
+======  ===============
+BAR NO  CONSTRUCTS USED
+======  ===============
+BAR0    Config Region
+BAR1    Self Scratchpad
+BAR2    Peer Scratchpad
+BAR3    Doorbell
+BAR4    Memory Window 1
+BAR5    Memory Window 2
+======  ===============
+
+However if we allocate a separate BAR for each of the regions, there would not
+be enough BARs for all the regions in a platform that supports only 64-bit
+BARs.
+
+In order to be supported by most of the platforms, the regions should be
+packed and mapped to BARs in a way that provides NTB functionality and
+also makes sure the host doesn't access any region that it is not supposed
+to.
+
+The following scheme is used in EPF NTB Function:
+
+======  ===============================
+BAR NO  CONSTRUCTS USED
+======  ===============================
+BAR0    Config Region + Self Scratchpad
+BAR1    Peer Scratchpad
+BAR2    Doorbell + Memory Window 1
+BAR3    Memory Window 2
+BAR4    Memory Window 3
+BAR5    Memory Window 4
+======  ===============================
+
+With this scheme, for the basic NTB functionality 3 BARs should be sufficient.
+
+Modeling Config/Scratchpad Region:
+----------------------------------
+
+.. code-block:: text
+
+ +-----------------+------->+------------------+        +-----------------+
+ |       BAR0      |        |  CONFIG REGION   |        |       BAR0      |
+ +-----------------+----+   +------------------+<-------+-----------------+
+ |       BAR1      |    |   |SCRATCHPAD REGION |        |       BAR1      |
+ +-----------------+    +-->+------------------+<-------+-----------------+
+ |       BAR2      |            Local Memory            |       BAR2      |
+ +-----------------+                                    +-----------------+
+ |       BAR3      |                                    |       BAR3      |
+ +-----------------+                                    +-----------------+
+ |       BAR4      |                                    |       BAR4      |
+ +-----------------+                                    +-----------------+
+ |       BAR5      |                                    |       BAR5      |
+ +-----------------+                                    +-----------------+
+   EP CONTROLLER 1                                        EP CONTROLLER 2
+
+Above diagram shows Config region + Scratchpad region for HOST1 (connected to
+EP controller 1) allocated in local memory. The HOST1 can access the config
+region and scratchpad region (self scratchpad) using BAR0 of EP controller 1.
+The peer host (HOST2 connected to EP controller 2) can also access this
+scratchpad region (peer scratchpad) using BAR1 of EP controller 2. This
+diagram shows the case where Config region and Scratchpad regions are allocated
+for HOST1, however the same is applicable for HOST2.
+
+Modeling Doorbell/Memory Window 1:
+----------------------------------
+
+.. code-block:: text
+
+ +-----------------+    +----->+----------------+-----------+-----------------+
+ |       BAR0      |    |      |   Doorbell 1   +-----------> MSI-X ADDRESS 1 |
+ +-----------------+    |      +----------------+           +-----------------+
+ |       BAR1      |    |      |   Doorbell 2   +---------+ |                 |
+ +-----------------+----+      +----------------+         | |                 |
+ |       BAR2      |           |   Doorbell 3   +-------+ | +-----------------+
+ +-----------------+----+      +----------------+       | +-> MSI-X ADDRESS 2 |
+ |       BAR3      |    |      |   Doorbell 4   +-----+ |   +-----------------+
+ +-----------------+    |      |----------------+     | |   |                 |
+ |       BAR4      |    |      |                |     | |   +-----------------+
+ +-----------------+    |      |      MW1       +---+ | +-->+ MSI-X ADDRESS 3||
+ |       BAR5      |    |      |                |   | |     +-----------------+
+ +-----------------+    +----->-----------------+   | |     |                 |
+   EP CONTROLLER 1             |                |   | |     +-----------------+
+                               |                |   | +---->+ MSI-X ADDRESS 4 |
+                               +----------------+   |       +-----------------+
+                                EP CONTROLLER 2     |       |                 |
+                                  (OB SPACE)        |       |                 |
+                                                    +------->      MW1        |
+                                                            |                 |
+                                                            |                 |
+                                                            +-----------------+
+                                                            |                 |
+                                                            |                 |
+                                                            |                 |
+                                                            |                 |
+                                                            |                 |
+                                                            +-----------------+
+                                                             PCI Address Space
+                                                             (Managed by HOST2)
+
+Above diagram shows how the doorbell and memory window 1 is mapped so that
+HOST1 can raise doorbell interrupt on HOST2 and also how HOST1 can access
+buffers exposed by HOST2 using memory window1 (MW1). Here doorbell and
+memory window 1 regions are allocated in EP controller 2 outbound (OB) address
+space. Allocating and configuring BARs for doorbell and memory window1
+is done during the initialization phase of NTB endpoint function driver.
+Mapping from EP controller 2 OB space to PCI address space is done when HOST2
+sends CMD_CONFIGURE_MW/CMD_CONFIGURE_DOORBELL.
+
+Modeling Optional Memory Windows:
+---------------------------------
+
+This is modeled the same was as MW1 but each of the additional memory windows
+is mapped to separate BARs.